Construction & Trades jobs in Cherry Hill Township, New JerseyCreate job alerts

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers’ mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers’ mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Maintenance Mechanic Job Code: 32720 Job Location: Camden, NJ Schedule: 9/80 Job Description: We are seeking a skilled Unionized Maintenance Mechanic to join our team. The successful candidate will perform a wide range of building and equipment maintenance duties, including electrical, mechanical, and general maintenance work such as carpentry, painting, and plumbing. In addition to performing maintenance tasks, the role includes leading and coordinating a group of employees to ensure maximum productivity, maintaining a clean and safe work area, ordering materials and supplies, and training other employees. Essential Functions: • Perform a wide range of building and equipment maintenance duties., • Normally performs electrical and mechanical trades, but not restricted from performing duties or combinations of duties usually identified with other crafts., • Observe equipment in operation or operates equipment if possible, to determine cause of trouble., • Installs, maintains, and repairs electro-mechanical equipment and fixtures and allied apparatus as directed., • Works from blueprints, schematics, or instructions and under a minimum of supervision and direction., • May participate in rearrangement of physical facilities., • May perform other general maintenance work such as but limited too carpentry, painting, plumbing, etc., • Performs all duties in the occupation the employee leads., • Assigns, directs and coordinates the work performed by a group of employees in accordance with oral or written instructions given by the supervisor., • Leads and coordinates the group of employees in the performance of work to insure maximum productivity., • Orders material and supplies required to maintain the manufacturing and base building equipment. Qualifications: • Able to obtain and maintain a Government Security Clearance., • High School diploma or equivalent, • Minimum of 2 years’ experience related to the role and responsibilities of the position, • CFCR Certification or ability to obtain within 6 months of employment, • Ability to navigate and enter data into a CMMS system. (Work order System), • Ability to monitor, interact and adjust as needed with Building Management System., • Ability to navigate and work on a computer for email, ordering, training, etc. Microsoft Outlook, Excel, Word preferred., • Must be able to stand, reach, bend and stoop for extended periods of time, • Ability to operate an Electric Pallet Jack, • Johnson Controls Metasys knowledge a plus. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in ___ or ___. For information regarding your Right To Work, please click here for ___ or ___.

As a global marketing experience company, Quad’s goal is to help our clients win every day. We use our data-driven integrated marketing and manufacturing platform to streamline solutions for our clients, reduce friction and enhance their marketing spend effectiveness. We’ve built a rich legacy by believing in our people, allowing them to act like owners and to take charge of their own success. Whether an operator, sales rep, a graphic artist or a clinician, we’re all driven to perform at our best— for ourselves and our clients. At our core, we’re a company that believes we can always create a better way. Quad, a global leader in the commercial printing and direct marketing industry is seeking a Commingle Mechanic to work in our rapidly expanding East Coast Digital Print and Commingling Supercenter in Westampton, NJ. Pay range is $24.80 - $37.20 These positions are responsible for performing skilled mechanical maintenance work in a fast-paced environment-- including repair, inspection, modification, and improvement of Letter Sorter equipment. The Commingle Mechanic plays an essential role in helping the plant provide high quality product and efficient service to our customers by minimizing operational downtime. Full-time positions are available on the following shifts: D shift – Sunday – Thursday and every other Friday 11 PM – 7 AM. Responsibilities include, but are not limited to: Train and assist operators in set up and troubleshooting operator problems; Train Workers in operational techniques and operational adjustments; Observe and listen to operating machines and equipment to diagnose machine malfunctions and determine need for adjustment or repair; Study sketches, machine specifications or parts to determine type and dimensions of parts needed; Maintain inventory of parts and request part orders when limits are reached; Dismantle machine or equipment to examine parts for defect or to remove defective parts; Replace defective part with new part or repair part needed; Assemble and test machine to verify correction of malfunction; Maintain machine by following PM schedule; Communicate any foreseeable production problems (material or mechanical in nature); Comply with all quality, safety rules, and regulations as well as Standard Operating Procedures; Performs other related duties as assigned or required. Qualifications: Prior mechanical experience and/or training; Problem solving/Troubleshooting is a plus; Ability to move about to inspect/repair machines including climbing, bending, and squatting in tight areas are also required; Basic computer skills are required; Good verbal and written comprehension, the ability to thrive in a team environment, and work independently. Prior printing industry experience or manufacturing experience (such as laborer, assembly, or distribution), experience in Direct Mail preferred. We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more. Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories. Drug-Free Workplace

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Level B Fleet Mechanic/Technician is a journeyman-level role responsible for independent diagnosis and repair of most mechanical, electrical, and hydraulic issues on refuse trucks, heavy trucks/tractors, trailers, and heavy equipment. This role also mentors Level C technicians, supports road calls, and ensures high uptime and DOT compliance for the fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: * Diagnostics & Repair • Independently diagnose and repair:, • Diesel and gasoline engines (intake, fuel, cooling, aftertreatment/emissions components)., • Drivetrain components including clutches, transmissions, differentials, PTOs, and drive lines., • Air and hydraulic brake systems, ABS, and suspension components., • Hydraulic systems on refuse equipment (packer bodies, arms, cylinders, pumps, valves, and hose routing)., • Electrical systems including starting/charging, multiplex wiring, sensors, and lighting. Preventive Maintenance & Compliance • Perform and sign off on DOT-compliant inspections and PMs, ensuring all safety-critical items are addressed and documented., • Accurately interpret and close out DVIR/eDVIR defects; communicate recurring defects to leadership for root-cause analysis., • Use OEM and aftermarket diagnostic software, service bulletins, and wiring schematics to troubleshoot complex issues. Road Calls & Operational Support • Respond to road calls and breakdowns throughout the NYC tri-state area; perform safe temporary or permanent repairs to return vehicles to service or coordinate towing as needed., • Communicate clearly with dispatch, supervisors, and drivers on repair status and estimated completion times. Mentorship, Training & Documentation • Guide and mentor Level C technicians on best practices, safety, troubleshooting, and proper repair methods., • Complete work orders thoroughly, capturing complaint, cause, correction, labor hours, and parts used., • Support continuous improvement initiatives for PM compliance, repeat repair reduction, and parts standardization. Requirements and Qualifications::, • High school diploma or GED required., • 3–5+ years hands-on experience as a diesel, truck, or heavy equipment mechanic/technician, including diagnostics and major component replacement., • Valid CDL Class B (or higher) with air brake endorsement strongly preferred to perform road tests and move equipment on public roads within NY/NJ/CT., • Demonstrated proficiency with hydraulic, pneumatic, and electrical systems., • Ability to read and interpret OEM service manuals, wiring diagrams, and hydraulic schematics., • Experience in refuse/solid waste, municipal, or LTL/heavy trucking fleet operating in urban environments preferred., • ASE certifications in Medium/Heavy Truck (T series) or Truck Equipment (E series); working toward Master status preferred., • Basic welding and cutting skills (MIG, stick, torch) for brackets, hangers, and minor body fabrication preferred. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $28.80/Hr. Salary Range Maximum: USD $32.00/Hr.

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio! IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks), • Performs repairs and assigned preventative maintenance services., • Estimates time and material cost on vehicle repairs and requisition of new parts., • Conduct safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time., • Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports., • Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards., • This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts., • Assists Sr. Technicians in the completion of project work. Requirements and Qualifications::, • Applicants must be at least 18 years of age and legally eligible to work in the United States., • A valid driver’s license is required. CDL a plus., • At least 5 years of experience in job duties., • Sanitation or construction industry experience a plus., • Computer diagnostic experience as diesel technician a plus., • Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar., • Working knowledge of applicable DOT and OSHA standards and regulations., • Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records., • Must be able to meet the physical and safety requirements of the position., • Must be able to provide own tools Work Environment • We are continuously investing in equipment, and many of our trucks are less than 2 years old., • Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings., • Only during breakdowns will this position be required to enter transfer station loading/ dumping area., • Personal Protective Equipment (PPE) will be provided. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $25.00/Hr. Salary Range Maximum: USD $32.00/Hr.

Malone Healthcare - Nursing is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Camden, New Jersey. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Start Date: 04/30/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights, • Weekly pay, • Holiday Pay, • Guaranteed Hours, • Continuing Education, • 401k retirement plan, • Pet insurance, • Referral bonus, • Medical benefits, • Dental benefits, • Vision benefits, • License and certification reimbursement, • Life insurance

LRS Healthcare - Travel Nursing is seeking a travel nurse RN Labor and Delivery for a travel nursing job in Camden, New Jersey. Job Description & Requirements • Specialty: Labor and Delivery, • Discipline: RN, • Start Date: 04/13/2026, • Duration: 13 weeks, • 36 hours per week, • Shift: 12 hours, nights \n\n • Medical, Dental, and Vision\n, • Short-Term Disability\n, • Long-Term Disability\n, • Life Insurance\n, • 401(k)\n, • Certification & License Reimbursement\n, • Refer-a-friend Bonus Program\n, • Direct Deposit - Weekly\n, • 24-Hour Support\n\n Benefits • Medical benefits, • Life insurance, • 401k retirement plan, • License and certification reimbursement, • Referral bonus, • Weekly pay

Job DescriptionHVAC Service Technician (Residential Service) - Up to a $4K Sign On Bonus! At Hutchinson we pride ourselves in creating an excellent working environment by hiring the best technicians, training them better than anyone, and creating an environment where our technicians are our number one priority. Reasons you will love working here: • Along with our industry leading pay and incentive programs, we also provide flexible schedules to match YOUR lifestyle and NO ON CALL. The following are just a few examples of schedules we are looking to hire for (Mon-Fri 8-4, Tue-Sat 8-4, Sun - Thr 8-4, We also offer four ten hour shifts with three days off. These are just examples - we will customize your shift with YOU!)., • Paid Time Off Minimum two-weeks after ninety days (We MATCH your current PTO balance if greater than two weeks)., • Company Supplied Tools, • Bonus incentives, • Fully stocked warehouse with parts runners operating 7 days a week, • We offer consistent and reliable full-time year-round work, • New Clean Fully Stocked Truck!, • Training & development programs to help YOU GROW - (Boiler training, Heat Exchanger Training, Nexstar Customer Service Training, Oil Service Training, just to name a few)., • Career Advancement Opportunities - We pride ourselves in promoting from within the organization and we are committed to helping you grow into leadership position if that is a path you are interested in., • Full Benefits Package with a 401k, • Company issued phone and iPad = no paperwork!, • Yearly boot allowance, • Tool Co-op program for when you are ready to upgrade your personal tools, • Our shop is also stocked with water, Gatorade, coffee, and snacks, • Flexible schedules that fit YOUR life with NO ON CALL We will design a shift that fits YOUR SCHEDULE. Apply TODAY and schedule time to hear more about what we can do for YOU from one of our team members. APPLY NOW! Job Posted by ApplicantPro

Job DescriptionUnder the supervision of Chief and/or Assistant Chief Engineer, the HVAC Mechanic performs functions and duties that do not require the expertise of a Stationary Engineer. Supports the implementation and documentation of site safety plans and all ABM Engineering Services’ operational standards and guidelines as well as site specific standards, policies and procedures relating to the engineering department. REPRESENTATIVE FUNCTIONS OR DUTIES: • Maintains and cleans mechanical, electrical and shop areas., • Coordinates parts, supplies, and equipment from local vendors and inventory., • Performs simple procedures and tasks and other routine maintenance duties., • Performs miscellaneous tasks as assigned by the Chief Engineer and Assistant Chief Engineer., • Fosters a work environment that promotes energy conservation and continuous improvement of engineering functions., • As appropriate, records all pertinent data in building logbooks and makes all appropriate daily entries., • Process administrative paperwork in accordance to departmental policies and procedures., • Actively functions as a team member., • Demonstrates commitment to quality of service., • Complies with Able Engineering Services and facility policies and procedures., • Complies and participates with Able Engineering Services safety program., • Complies and participates in facility specific safety program., • Maintains regular attendance in the workplace., • Provides highest quality of service to the tenants, staff and visitors at the facility., • Participates in regular required communication with Chief Engineer, Assistant Chief Engineer, management, tenants and other staff.SKILLS / EDUCATION / EXPERIENCE:, • Experience that is commensurate with the specific facility for the position of HVAC Mechanic, • Computer skills at a level to interact with building and ABM Engineering Services’ computerized systems in place., • Certification meeting OSHA ACM awareness training requirements as required.

Job DescriptionSalary: $30.00-$42.00/hr. Take your HVAC career to the next level with a company that invests in YOU. Bovio Rubino Service is hiring anexperienced HVAC Service Technicianto join our growing, family-owned team servingSouth Jersey. If you wanttop pay, steady work, real training, and a company that treats technicians with respect, this is the opportunity youve been looking for. About Bovio Rubino Service: In 2021, two respected, long-standing South Jersey HVAC companies merged to formBovio Rubino Service, bringing together90+ years of industry experience. We believe in doing the right thing for our customers and for our employees and we back that up withtraining, career growth, and real support. Apply todayand see why technicians build long-term careers here. Serving South Jersey | Family-Owned | Technician-Focused Why Technicians Choose Bovio Rubino Service: • $30$42/hrbased on experience, • Up to $3,500 sign-on bonusfor qualified techs, • Weekly pay, • Company vehicle+ gas card, • Company-providediPad, uniforms, and tools, • Weekly paid training+ access to our onsitelive-fire training facility, • 8 health insurance plans(5 plans are$0 cost to employees), • HSA with employer contribution, • Employer-paidlife insurance, • Dental, vision, STD & LTD options, • 401(k) with 4% company match(after 6 months), • 7 paid holidays + PTOthat grows with tenure, • Employee discounts on HVAC & plumbing services Pay & Schedule: • $30$42/hour, • SPIFFs and performance bonuses available, • MondayFriday schedule, • Diagnose, troubleshoot, and repairresidential & light commercial HVAC systems, • Performmaintenance, tune-ups, and system evaluations, • Clearly explain repair options and system performance to customers, • Deliver professional, high-quality customer service on every call, • Communicate with dispatch for efficient routing and job updates, • Safely operate and maintain acompany-provided vehicle What Were Looking For: • 3+ yearsof residential or light commercial HVAC service experience, • EPA Universal Certification, • Valid drivers license with aclean, insurable driving record, • Ability to read wiring diagrams and interpret blueprints, • Strong communication and customer service skills, • Knowledge of sheet metal practices and air balancing, • Willingness to obtainNATE certification within 1 year(we support you)

Job Description Company Description Hutchinson Mechanical Services is a fast-growing business in the tri-state area and in need of experienced highly qualified mechanics in the Central and Northern Jersey areas as well as Northern Delaware. We are active in the NJ Direct-Install Program, the Smart Start Program and active as a utility contractor partner. Handling multiple product brands and with on-site warehousing as well as duct fabrications, we are able to respond to all commercial and industrial applications. Company Offers • Health and Dental insurance, • 401K package, • Paid time off, • Company truck, cell phone and uniforms, • Laptop for BMS accounts, • Tool alliance program, • Training and education help Job details Full-time Commercial Service HVAC Mechanic Competitive pay rates with great benefit and 401K packages. Salary: $18 to $40 per hour, OT, plus commissions and bonuses Work Hours: 40+ hours per week plus rotating on call and paid time off . Company supplied vehicle, uniforms, lap top, phone, tool allowance and more! This Job Is: • A job for which military experienced candidates are encouraged to apply, • A job for which all ages, including older job seekers, are encouraged to apply, • Open to applicants who do not have a college diploma Full Job Description As a Hutchinson Mechanical Service commercial mechanic, you will establish and maintain a positive relationship with customers, vendors and co-workers through effective oral and written communication skills via phone, computer, and face to face (following company and CDC policies and guidelines). You will perform scheduled and unscheduled preventative maintenance, inspections, site surveys and service requests including repair, replacement and modifications of equipment or systems as needed or requested by customers. You will need to maintain and repair all major manufactures of basic split systems, package rtu up to 90 ton, chillers up to 500 ton, boilers up to 6 million btu, DOAS units, energy recovery units as well as BMS. Great communicating skills with customers, account managers and project managers regarding service call findings and recommendations a must. Work closely with the dispatcher and field manager for daily assignments, materials acquisition and weekly scheduling. Qualifications · Service, 4 years (Required) · High School or Trade Equivalent (Required) · EPA License (Required) · Work authorization: United States (Required) · Valid driver's license and a good driving record · Ability to pass a background check and periodic drug tests · Good communication skills · Conscientious, motivated, on-time and work safe. · Diagnose issues and resolve quickly to get the customer back up and running · Lift 50lbs · Carry and climb ladders when needed. Required Skills · Possess a broad array of knowledge including computer systems configuration, mechanical systems, pneumatic systems, 0-10 vdc electrical control signals, 24 vac - 480 vac and hydraulic system principals. · Ability to learn new technology and processes quickly · Strong verbal and written communication skills with both colleagues and customers · Organized and detail oriented, particularly with regard to maintaining records · Keeps a clean and neat appearance in front of customer · Hands on Electro-Mechanical aptitude · Experience with hand tools, power tools, meters, gauges · Experience in field service type work · Working in all types of weather · Work long days and or weekends when required · Work in the on-call rotation · Able to climb high ladders · Able to lift 50 lbs. · Must be able to wear a respirator · Ability to respond to short notice project work and emergency service calls · Plumbing skills a plus Work Remotely • NoHide Job Posted by ApplicantPro

Job Description NOW HIRING: HVAC SERVICE TECHNICIANS! Location: Len the Plumber Heating & Air Branch: Cherry Hill, NJ Compensation: Earn $80k to $120k+ yearly!!+ Incentive Opportunities Sign-on Bonuses up to $7500!!! About Len the Plumber Heating and Air Len the Plumber Heating and Air has been proudly serving our community for decades with exceptional plumbing, heating, and cooling services. We believe in treating our team like family, providing the tools, training, and support needed to succeed. At Len the Plumber Heating and Air, we believe in Doing It Right the First Time—for our customers and our employees. Why Join Us? • Top-Tier Pay: Competitive pay rates with incentive opportunities, • Fully Stocked Trucks: Company-provided vehicle with gas card and tools, • Ongoing Training: Paid technical training, certifications, and development programs, • Top Branch Leaders: NJ Branch is known for its leadership team! Come work for the best!, • Comprehensive Benefits: Health, dental, and vision insurance, 401(k) with company match, paid time off (PTO), and paid holidays, • Career Growth: Clear paths for advancement into leadership or specialization, • Strong Company Culture: Team outings, employee appreciation events, and supportive leadership, • Steady Work: Year-round residential and light commercial projects What You’ll Do: • Diagnose, repair, and maintain residential and light commercial HVAC systems, • Install heating, ventilation, and air conditioning units, ductwork, thermostats, and controls, • Perform preventive maintenance and system inspections, • Provide excellent customer service by explaining work performed and answering questions, • Accurately document work orders, materials used, and recommendations What We Are Looking For: • Minimum 2 years of residential or light commercial HVAC experience preferred, • Strong diagnostic skills and mechanical aptitude, • Excellent communication and customer service skills, • Ability to work independently and as part of a team, • Valid driver’s license with a clean driving record, • High school diploma or equivalent (technical school a plus) Disclaimer: The above job description is not intended as, nor should it be construed as, exhaustive of all responsibilities, skills, efforts, or working conditions associated with this job. Reasonable accommodation may be made to enable qualified individuals with disabilities to perform the essential functions of this job. EOE

Job DescriptionSalary: $18.00-$26.00/hr. Bovio Rubino Service is seeking a friendly and driven self-starter to join our team as a HVAC Maintenance Technician. In 2021, two South Jersey family-owned and operated HVAC, plumbing, and electrical companies, with over 90 years of combined experience in the industry, came together to create Bovio Rubino Service, your trusted choice in South Jersey for heating, cooling, plumbing, and electrical services. The S.M.A.R.T. values that are at the core of everything we do here at Bovio Rubino Service will ensure that you are making a S.M.A.R.T. choice when it comes to finding your next work family. Support each other in a positive & encouraging way Meet & exceed client needs & expectations Always do what is right Respect our client's homes & businesses Treat team members and clients as if they were family Work Schedule: As a HVAC Maintenance Technician, you will work Monday through Friday with overtime and weekends as needed. Pay: As a HVAC Maintenance Technician, you will be paid $18.00 - $26.00/hour depending on experience and be eligible to earn company SPIFF bonuses. As a HVAC Maintenance Technician, you will: • Provide exceptional customer service by educating customers on their HVAC system, their options related to its maintenance, and the importance of annual HVAC system maintenance, • Answer any customer questions and ensure customer satisfaction, • Maintain residential and light commercial HVAC equipment, • Communicate with the dispatch team regularly to ensure timely service and updates to the customer, • Safely drive between jobsites in a company-provided vehicle At Bovio Rubino Service, you will find: • A company culture dedicated to employee growth through training and support, • On-site paid weekly training to advance your career, • Weekly pay, • 8 health insurance plan options, including 5 options where the employee pays nothing for their premium!!!, • Health Savings Account option with employer contribution, • Employer paid life insurance, • Dental/vision, short-term disability and long-term disability insurance options, • 401(k) with 4% company match after 6 months, • 7 paid holidays, • Paid time off that increases based on tenure, • Company-provided vehicle, iPad, and uniforms, • Discounted HVAC and plumbing repair services and free HVAC maintenance services, • A wide range of other benefits that assist our employees with their health, wealth, and happiness You could be a great fit as a HVAC Maintenance Technician with Bovio Rubino Service if you have: • 1+ years of HVAC field experience, • An EPA Universal Certificate, • A high school diploma or equivalent, • A valid drivers license with an insurable driving record, • The ability to lift 50 lbs., • A strong knowledge of HVAC industry best practices and building code, • The ability to safely operate power and hand tools If you would like to learn more about Bovio Rubino Service, please visit us at .

Job Description Alber Service Company in Pennsauken, NJ is looking to hire a full-time HVAC Service Technician to go into our clients' homes to troubleshoot, diagnose, and repair their residential heating and cooling systems, as well as complete preventative maintenance. Are you a skilled HVAC technician who is looking for the right company to build a successful, long-term career with? If so, read on! We offer our HVAC Service Technicians a competitive salary of $80,000-$120,000/year with NO Overnight On-Call! You would also be eligible for our generous benefits including health, dental, and a retirement plan. We provide uniforms, a company truck, fully-paid training and certifications, and high growth opportunity. If you would like to work in a friendly and supportive work environment, apply today! ABOUT ALBER SERVICE COMPANY Alber Service Company is a family-owned, New Jersey-based home heating and cooling contractor with over half a century of experience. Back in 1960, we opened our doors to our heating and cooling business, providing simple installs and maintenance services for furnaces, air conditioners, and water heaters. Fast forward to today and we are now a diverse company offering home energy services, professional HVAC services, as well as home insulation and air sealing services. We know that we would not be successful without our outstanding employees. Here at Alber Service Company, we value teamwork, teaching each other, always doing the right thing, hard work, and taking pride in making lives better. In order to attract and retain individuals who share our values, we offer competitive pay, generous benefits, and a great work environment. QUALIFICATIONS • 5+ years of residential HVAC Service Technician experience, • Valid driver's license and a good driving record ARE YOU READY TO JOIN OUR TEAM? If you feel that you would be right for this HVAC technician position, fill out our initial 3-minute, mobile-friendly application so that we can review your information. We look forward to meeting you! Location: 08110

Summary You will serve as an ELECTRICIAN LEADER (EXPERT) in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will serve as an Expert Electrician leading a group to ensure work assignments are completed.\n, • You will be responsible for the repair, overhaul, installation, modification, calibration, and test of electrical systems and equipment on naval surface ships and submarines, both nuclear and non-nuclear.\n, • You will set up, operate, and troubleshoot various types of equipment utilized to manufacture and overhaul surface and sub-surface ship's components.\n, • You will disassemble, clean, and replace visually found defective parts, reassemble, check for more faulty components, replaces the same, align, calibrate and check out equipment using known standards and test equipment.\n, • You will oversee adjustments and repairs to maintain operation of electrical equipment, cause of malfunction or defects and repairs or replaces worn, damaged, or defective parts.\n, • You will assure that all work assignments of the groups are carried out on any of the three shifts as assigned.\n, • You will pass instructions received from supervisors and provide overview of tasks to be performed to other workers.\n, • You will keep supervisor apprised of potential problems, controversial issues, and recommend corrective actions.\n, • You will inspect completed and in process work for quality of workmanship and adhere to requirements, specifications, standards, plans and schedules.\n, • You will perform research to continually improve trade processes and keep shop personnel apprised of new technologies, procedures, best practices, and tooling improvements.\n, • You will ensure plans, blueprints, materials, and tools are available for specific jobs.\n, • You will mentor, train and instruct trade employees in a wide range of electrical equipment.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position may require work onboard ships, the ability to climb vertical ladders and work in awkward positions and confined spaces\n, • This position require may selectee to be willing and able to lift and/or carry loads/items up to 40 pounds in weight.\n, • The incumbent of this position must obtain, maintain and use a government travel card.\n, • This may be a Drug Testing position. If so, successful completion of a pre-employment drug test (including marijuana) is required.\n, • This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job DescriptionMIG Welder – 1st ShiftAbout the Role We are currently seeking experienced MIG Welders to join our growing team on 1st shift (Monday–Friday, 6:00 AM–2:30 PM). This is an excellent opportunity for skilled welders with a strong background in fabrication and production welding who are looking for stability, great benefits, and room to grow. In this role, you’ll perform MIG welding, fabrication, and finishing work on steel storage and shipping containers. All work is completed on-site in a fast-paced production environment where containers move through multiple departments on an automated conveyor system. What You’ll Do • Perform stitch welds and full welds on components and assemblies using the GMAW (MIG) process, • Read and interpret blueprints and basic prints, • Measure and verify dimensions using a tape measure, • Use hand and power tools, including grinders, • Operate oxy/acetylene and plasma cutting equipment as needed, • Monitor welding processes to prevent overheating, warping, distortion, or material shrinkage, • Set up and operate manual and semi-automatic welding equipment, • Safely and efficiently use tools common to the welding tradeWhat We’re Looking For, • Approximately 5 years of hands-on welding experience, • Ability to pass the AWS 4G welding test, • Strong blueprint reading and measurement skills, • Experience with MIG welding required, • Experience with oxy/acetylene and plasma cutters is a plusAdditional Skills That Set You Apart, • Ability to lay out and measure materials accurately, • Experience drilling and punching holes for fasteners, • Knowledge of fastening methods including welds, bolts, rivets, and solder, • Ability to fabricate or modify parts using various tools, • Competitive pay, • 401(k) with employer match, • Medical, dental, and group life insurance, • Paid vacation and holidays, • Quarterly safety incentive bonus, • Career advancement opportunities in a growing company Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Cherry Hill,NJ. Application Deadline This position is anticipated to close on Apr 3, 2026. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Thompson First Group is seeking Welders for contract to hire positions with a local client in Cinnaminson, NJ. Candidates with experience welding in an industrial setting are encouraged to apply. Responsibilities: • Accident prevention – actively identify, correct and/or report safety hazards to prevent accidents., • Actively identify and pursue cost reduction and efficiency/profit improvement opportunities., • Support the ISO 9001 Quality Management System and the Quality Policy calling for self-inspection of your work product., • Reads blueprints., • Lay out, measure, and mark dimensions and reference lines on material, such as roofing panels, according to drawings or templates, using calculators, scribes, dividers, squares, and rulers., • Drill and punch holes in metal, for screws, bolts, and rivets., • Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items., • Fabricate or alter parts at construction sites, using shears, hammers, punches, and drills., • Trim, file, grind, deburr, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools., • Operate safety equipment and use safe work habits., • Weld components in flat, vertical, or overhead positions., • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits., • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding., • Will also use basic hand tools and grinder at times, • Detect faulty operation of equipment or defective materials and notify supervisors., • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding., • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material., • Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications., • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment., • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers., • Lifting production objects of up to 50lbs., • Performs other duties as assigned., • Competitive salary, • 401k employer match, • Paid Time Off and holidays, • Medical/Dental/Group Life Insurance, • Quarterly safety incentive bonus when goals are met, • Strong company growth with emphasis on employee advancement, • Long list of unusual benefits, including birthday breakfast with CEO, turkey for Thanksgiving and many others. Requirements Education: High school diploma or equivalent. Experience: The candidate should possess 2 years of welding experience, able to read blueprints. Must pass AWS 4G welding test. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. Thompson First Group is an equal opportunity employer and participates in E-Verify. All applicants will be considered for employment regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, or any other characteristic protected by federal, state or local law.

Job DescriptionDescription: Stitch weld, full weld components and assemblies with GMAW process. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. Will also use basic hand tools and grinder at times. Job Summary: This position reports to the Department Supervisor. The ideal candidate should possess knowledge of machines and tools including their design, uses, repair, and maintenance. Responsibilities: • Identify and implement efficiency improvements, cost reductions and profit improvement initiatives., • Accident prevention – correct and/or report any unsafe working conditions before they result in an accident., • Reads blueprints., • Lay out, measure, and mark dimensions and reference lines on material, such as roofing panels, according to drawings or templates, using calculators, scribes, dividers, squares, and rulers., • Drill and punch holes in metal, for screws, bolts, and rivets., • Fasten seams and joints together with welds, bolts, cement, rivets, solder, caulks, metal drive clips, and bonds to assemble components into products or to repair sheet metal items., • Fabricate or alter parts at construction sites, using shears, hammers, punches, and drills., • Trim, file, grind, deburr, buff, and smooth surfaces, seams, and joints of assembled parts, using hand tools and portable power tools., • Operate safety equipment and use safe work habits., • Weld components in flat, vertical, or overhead positions., • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits., • Clamp, hold, stich-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding., • Will also use basic hand tools and grinder at times., • Detect faulty operation of equipment or defective materials and notify supervisors., • Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding., • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material., • Examine work pieces for defects and measure work pieces with straightedges or templates to ensure conformance with specifications., • Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment., • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers., • Lifting production objects of up to 50lbs., • Performs other duties as assigned. We offer benefits to our full-time employees that include: • Health Insurance, • Dental Insurance, • Vision Insurance, • Basic and Voluntary Life, • Long-Term Disability, • Flexible Spending Accounts, • Employee Assistance Program, • Paid Time Off, • Paid Holidays, Bereavement, Jury Duty, • 401(k) with company match Location: This position is onsite (non-remote) at the Company’s corporate headquarters in Cinnaminson, NJ. This position may occasionally require working overtime and/or working outside of the Company’s normal hours of operation. Requirements: Education: High school diploma or equivalent. Experience: The candidate should possess 2-5 years of welding experience, able to read blueprints. Must pass AWS 4G welding test. Knowledge of oxy/acetylene and plasma cutter use a plus. Must be able to read tape measure and basic print reading. WE ARE AN EQUAL OPPORTUNITY EMPLOYER COMMITTED TO HIRING A DIVERSE WORKFORCEEOE/Minorities/Females/Veterans/Disability

Job Description Heidelberg Materials is seeking a Maintenance Technician at our Camden Slag Plant in Camden, NJ. This position is a rotating 7am-7pm and 7pm-7am schedule. Two-week period on days and then two-week period on nights with days off in between. If you have previous heavy industrial maintenance experience, Heidelberg Materials wants to hear from you! About the Company: Heidelberg Materials North America, previously known as Lehigh Hanson, operates more than 450 locations with approximately 9,000 employees in the U.S. and Canada. Heidelberg Materials provides the materials to build our future. Our future is sustainable. Our future is digital. And it goes beyond cement, aggregates and ready-mixed concrete. We're dedicated to our goal to create sustainable value with industry-leading products and solutions to satisfy the construction needs of our customers around the world. We are Building a Better Future for our people, our customers, our communities and our shareholders. What You'll Get To Do As a Maintenance Techician you will perform preventative and corrective mechanical and electrical maintenance activities on plant equipment. You will execute and provide accurate feedback on work orders and inspection sheets. Earn $28 per hour plus regular overtime! Requirements: • High school diploma or equivalent (GED), • Previous heavy industrial maintenance experience required, • Knowledge of different types of bearing (application) in rotating equipment is essential, • Ability to perform all technical aspects of the job by using all tools or systems required to perform the work. (MIG and ARN welders, cutting torch, plasma cutter, micrometers and calipers; Hoisting and rigging equipment, hand tools, hydraulic jacks), • Ability to execute periodic calibration on instrumentation, including scales, probes, feeders, etc., • Ability to perform required information for spare parts purchasing and perform physical inventory as needed. Ensure any special tools and equipment required for a maintenance activity are returned in a timely fashion and in good condition., • Ability to read, write, and comprehend simple correspondence, • Ability to work different shifts, holidays and/or overtime as required, • Competitive Pay – Earn $28 per hour plus regular overtime, • 401k with employer match, • Year-Round Health, Dental & Vision Insurance, • Life Insurance, • Vacation & Paid Holidays If this sounds like an opportunity you would be interested in, please visit our application page by clicking here. Heidelberg Materials is a drug-free workplace. All qualified applicants will receive consideration for employment without regard to the individual's race, color, sex national origin, religion, age, disability, genetic information, status as a military veteran or any other characteristic protected by applicable law. Powered by JazzHR DzA0OJGlVW

Job Description CRM Residential is a trusted and growing leader in affordable housing property management, committed to strengthening communities and elevating the places people call home. As we continue to expand our portfolio, we are focused on improving operational excellence across our properties—investing in upgrades that create safer, more welcoming environments and delivering strong results, with most communities earning 90% or higher on inspections in the past year. At the heart of our success are the people who choose to build their careers with us. We believe exceptional housing starts with empowered teams, which is why we invest in ongoing training, clear career paths, mentorship programs, and technology that makes work easier, safer, and more efficient. Working at CRM Residential is more than a job—it’s a purpose-driven career where you can grow, make a meaningful impact, and help provide reliable, quality homes for those who need them most Why Join the CRM Residential Team: • Comprehensive Health Coverage, • Retirement Savings with employer contribution, • Bonus Potential, • Paid Time Off (PTO) The Maintenance Technician will receive general supervision and direction from the Community Manager. The Maintenance Technician will comply with established policies and procedures and not act contrary to such guidelines without Community Manager approval. The Maintenance Technician will be responsible for but not limited to: • Conducting routine maintenance tasks such as changing light bulbs, unclogging drains, and fixing leaky faucets, • Performing minor repairs such as drywall patching, painting, and carpentry work, • Maintaining the property's grounds, including lawn care, snow removal and cleaning of common areas, • Responding to tenant requests for repairs and maintenance issues, • Conducting regular inspections and identifying potential maintenance issues before they become major problems, • High School diploma or equivalent education required. 3-4 years of experience can offset minimum educational requirements for this position., • 2 years of maintenance technician experience, • Must have experience in plumbing, electrical, carpentry, painting and general maintenance., • Previous experience in commercial or multi-unit residential property is desirable. Experience level may vary due to the special needs of the property., • The position requires effective oral and written communication skills, • Maintains current license/certificate and/or specialized skills in at least one (or more) of the following building trades: electrical, plumbing, carpentry, HVAC, fire protection or mechanical., • Valid driver's license and reliable transportation, • Must be willing to be on-call 24/7, • Indoor/outdoor environment subject to changing conditions and temperatures exceeding 90 degrees at times, • Ability to lift 55 pounds independently and support team lift with reasonable accommodations, • This job involves walking and standing for long periods as well as stooping, squatting, lifting, carrying, pushing and climbing. Working on ladders at varying heights CRM Residential is an award-winning full-service property management company which professionally manages 11,000+ apartments valued in excess of one billion. We are exclusively third-party so there is no conflict of interest between the properties that we manage for our clients and our own properties, because we do not own any properties. Our focus is dedicated to our clients. We are an equal opportunity employer and welcome applicants from all backgrounds to apply. If you have a passion for property maintenance and a desire to work for a reputable company, we encourage you to apply for this exciting opportunity. Powered by JazzHR H20T2bocXq

Job Description At Curaleaf, we're redefining the cannabis industry with a strong commitment to quality, expertise, and innovation. As a leading global cannabis provider, our brands—including Curaleaf, Select, and Grassroots—offer premium products and services in both medical and adult-use markets. Join us at Curaleaf to be part of a high-growth, purpose-driven company that champions corporate social responsibility through our Rooted in Good initiative, supporting community outreach and positive change. Here, you'll have the opportunity to make a meaningful impact, drive innovation, and help shape the future of cannabis. Maintenance Technician Job Type: Full-Time; Non-Exempt Shift: M-F | 7:00am-3:30pm Starting Pay Rate: $21.00/hr Location: Bellmawr, NJ Who You Are: You are a skilled problem-solver with a proactive approach to building maintenance. You excel at working independently and as part of a team, maintaining positive relationships with colleagues, customers, and vendors. Your communication skills—both verbal and written—ensure seamless collaboration. You are detail-oriented and thrive in environments requiring hands-on expertise across various trades, including electrical, plumbing, carpentry, and painting. Flexible and dependable, you're ready to tackle maintenance challenges in diverse conditions, ensuring our grow house facility runs smoothly. What You'll Do: • Perform scheduled and unscheduled maintenance tasks, including inspections and site surveys., • Repair or replace hardware on doors, cabinets, furniture, windows, and bathroom partitions., • Replace ceiling tiles, flooring, wall protection, and ceramic tiles., • Troubleshoot and fix electrical components, such as light bulbs, fixtures, ballasts, switches, and receptacles., • Handle plumbing repairs, including faucet washers, toilet seats, and clogged drains., • Patch and paint walls and address minor roofing, masonry, and block repairs., • Assist with snow removal, de-icing, and grounds maintenance., • Document facility deficiencies, complete preventative maintenance slips, and fulfill work orders., • Address urgent issues, such as leaks, power loss, and unsafe conditions., • Assemble, move, and install free-standing and wall-mounted equipment. What You'll Bring: • High School Diploma or GED, • Certificate in building maintenance from a vocational or certified school, • 3–5 years of experience in building maintenance, • Strong self-starter with excellent problem-solving abilities, • Effective communicator with strong customer service skills Even Better If: • You have proficiency in electrical, plumbing, carpentry, and painting., • You bring experience with reading prints, sketches, wiring diagrams, and schematics., • Ability to lift up to 50 pounds unassisted, • Ability to sit, stand, and walk for long periods of time, • Ability to occasionally climb ladder, crawl under low spaces, • Ability to use computer/look at a screen for long periods of time, • Ability to have close vision (able to read small print at 20 inches or less), • This position has allergen warnings - Potential exposure to dust, pollen, and plant pathogens. Curaleaf Pay Transparency$21—$21 USD What We Offer: • Career Growth Opportunities, • Competitive Pay and Benefits, • Generous PTO and Parental Leave, • 401(K) Retirement Plan, • Life/ Disability Insurance, • Community Involvement Follow us on Social Media: Instagram: @curaleaf.usa Twitter: @Curaleaf_Inc LinkedIn: Curaleaf LinkedIn Curaleaf Holdings, Inc. (TSX: CURA) (OTCQX: CURLF) ("Curaleaf") is a leading international provider of consumer products in cannabis with a mission to enhance lives by cultivating, sharing, and celebrating the power of the plant. As a high-growth cannabis company known for quality, expertise and reliability, the Company, and its brands, including Curaleaf, Select, Grassroots, Find, and Anthem provide industry-leading service, product selection and accessibility across the medical and adult-use markets. Curaleaf International is powered by a strong presence in all stages of the supply chain. Its unique distribution network throughout Europe, Canada and Australasia brings together pioneering science and research with cutting-edge cultivation, extraction and production. Home | Curaleaf | Cannabis with Confidence Our Vision: To be the world's leading cannabis company by consistently delivering superior products and services and driving the global acceptance of cannabis. Our Values: • Lead and Inspire., • Commit to Win., • ONE Curaleaf. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Individuals adversely impacted by the war on drugs are encouraged to apply. Current Curaleaf employees should apply for open positions through our Internal Job Board, which can be accessed via the link on The Leaf.

Job Description Directly reports to the Plant Manager. Functionally responsible for maintaining all manufacturing equipment and components at Almag Aluminium. As a member of the Maintenance team, openly shares knowledge and information including training of teammates. DUTIES AND RESPONSIBILITIES The duties and responsibilities of the Maintenance Millwright detailed below, but not limited to the following: • Accountable for all mechanical, fluidic, welding and plant equipment maintenance with minor electrical troubleshooting to ensure minimal downtime., • Work with minimal supervision in a safe manner maintaining a clean and orderly shop., • Respond to break-downs immediately and /or provide communication for repairs., • Openly share knowledge and train team mates on equipment functionality and history, procedures, and drawing mark ups., • Coach Operating personnel on equipment capability, limitations and preventative measures to improve equipment reliability., • Follow and take initiative as directed in PM program including improving the program itself., • Maintain the inventory of spare parts though initiating purchase request, orderliness of the racks and parts., • Troubleshoot Hydraulic systems including Pneumatic and Electrical circuits., • Repair, Overhaul, Fabricate, Assemble, and dismantle equipment using power tools, hand tools, machine tools and welding tools., • Operate and maintain machine tools such as a Lathe, Milling machine, Drill press and various cutting tools to fabricate machine parts to dimensional specifications., • Independently weld and fabricate to in order to repair machinery and improve production., • Monitor equipment performance, document and evaluate potential problems for root cause solutions and improvements., • Focus on continuous improvement of equipment performance to improve efficiency., • Must communicate effectively with all plant personnel., • Comply with all ISO and quality related policies, procedures and system requirements., • Perform other duties as required. Requirements MINIMUM QUALIFICATIONS Education/Experience • Completion of a formalized Millwright Training Program or equivalent technical diploma, • Minimum of 5 years’ experience as a Millwright/Maintenance Mechanic in related industrial maintenance, • High energy level, good creativity, self-confidence, time management and must be a team player, • Training or experience in troubleshooting related industrial maintenance machine’s Technical Skills/Competence • A strong understanding of hydraulics and Pneumatics is essential, • Exposure to Electrical Controls and PLCs (Allen Bradley) would be a strong asset, • Welding and Fabrication experience, • Ability to read Electrical and mechanical drawings and schematics, • Profit Sharing, • Education Assistance Program, • Social Events, • Safety Shoe and Glasses Allowance, • Internal Growth and Development, • Health and Dental, • Life and AD&D, • Vision, • Critical Illness Insurance, • Long Term Disability

Job Description The maintenance department is responsible for ensuring all machines are working safely and properly at all times. Responsibilities include, but are not limited to: -PM'ing all machines regularly -Blowing down plant and machines to ensure cleanliness -Responding to staff complaints regarding improper operation of machines in a timely manner -Scheduling repairs needed to prevent production downtime -Assist with machine install and removal *Black Seal Boiler License a plus!!!!! Clean Green Textile Services dba Single Source Plus offers a competitive compensation package including 401K with employer matching, paid vacation, sick days, etc.

Job Description The responsibilities are to carry out general maintenance tasks as assigned and perform as a maintenance and construction technician on in-house and outside construction projects as directed, and in the best interests of VOADV Property. SCOPE OF DUTIES: • Perform maintenance inspections, repair work, and perform construction project work as needed., • Keep an accurate record of work completed, including time and materials, and work independently., • Report all unsafe or potentially hazardous conditions immediately to the Construction & Maintenance Director., • Attend and participate in job meetings and training sessions as required., • Pick up and deliver necessary materials and supplies as needed or requested by the Construction and Maintenance Foreman., • Keep an accurate record of the petty cash account., • Responsible for the care and safekeeping of all department tools and equipment., • Be available for on-call emergency service as assigned., • Perform as crew leader when necessary and as assigned by the director, supervisor., • Maintain client and staff confidentiality in compliance with administrative policies and procedures., • Attend and participate in regularly scheduled staff meetings, supervisory conferences, and training sessions., • Interact with all clients, staff, and outside contacts with respect and courtesy. ADA ESSENTIAL FUNCTIONS: • Ability to climb stairs, and work from ladder while using or carrying tools., • Ability to lift a least 50 pounds several times during and 8-hour period., • Ability to see clearly all types of plans, gauges, rulers and drive a light truck., • Ability to operate power and non-power hand tools.

Job Description About Children of America (COA): We are a special blend of people, principles, and pride that creates a diverse and strong community. It is a special blend of people, principles and pride that makes the COA rich in diversity and strength. Job Summary: Children of America is seeking an experienced Maintenance Technicians join our team. Our Maintenance personnel ensure the safety of their assigned schools through regular maintenance and repair to the facilities, equipment and vehicles as requested by corporate and school management. Who Will You Interact with? In this role, you will have daily interactions with Maintenance Leadership and School Management. What are the day-to-day responsibilities? • Perform repairs and maintenance on assigned schools ensuring their adherence to government and licensing codes., • Cooperate with school and corporate management to ensure all work is accomplished in a timely manner., • Report any observed needed repairs or maintenance to supervisor., • Assist in the setup of all new facilities., • Deliver supplies from the warehouse., • Maintain supply inventory., • Purchase maintenance supplies in accordance with set policies and procedures at Children of America, • Ability to be on call the event of an emergency (may include weekends), • Utilize computerized maintenance logs and email to document completion of jobs and daily activity., • Ensure that all activities operate consistently and ethically within the mission and values of Children of America, • High school Diploma or GED required., • Min 2 years' experience in a multi-site maintenance role required., • Accountability: We empower self-decision making by accepting responsibility and learning from our mistakes to serve COA's mission, vision, and values., • Collaboration: We align solutions that understand the needs of our stakeholders to serve COA's mission, vision, and values., • Growth Mindset: We view obstacles as opportunities for growth, accepting feedback to enhance the development of employees and the organization., • Internal Career Advancement Opportunities, • Childcare Assistance Program, • Educational Assistance/Reimbursement, • Employee Referral Bonus, • Recognition Programs, • Medical, Dental, Vision, • 401(k), Life, Accident, & Disability Children of America is committed to fair and transparent hiring practices. This job description is intended to comply with applicable federal, state, and local laws, including but not limited to the Fair Labor Standards Act (FLSA), Equal Employment Opportunity Commission (EEOC) guidelines, Americans with Disabilities Act (ADA), and state-specific pay transparency regulations. The listed responsibilities, qualifications, and compensation range reflect the essential functions and expectations of the role. Final compensation will be determined based on experience, skills, geographic location, and internal equity. Children of America is an equal opportunity employer. We do not discriminate based on race, color, religion, sex, national origin, age, disability, genetic information, or any other protected status under applicable law. Reasonable accommodations may be provided to qualified individuals with disabilities upon request. All job offers are contingent upon the successful completion of a background check and the submission of the required state documents. Job Posted by ApplicantPro

Job Description WHO WE ARE Baldwin Richardson Foods is focused on enriching the flavor of life. As a full-service liquid products supplier and strategic partner to the food and beverage industry, Baldwin Richardson Foods combines its formulation expertise and unique packaging options with robust processing capabilities to produce high-quality sauces, toppings, syrups, fillings, and shelf-stable beverages for the world's most iconic Quick Service Restaurants (QSRs), Consumer Packaged Goods (CPG) brands, and food service companies. Its state-of-the-art Innovation & Culinary Center transforms trends and culinary inspiration into legendary products through an award-winning commercialization process. The company also manufactures and markets Mrs. Richardson's dessert sauces and Nance's mustards/condiments in addition to producing finished goods for the private label sector. BRF maintains its headquarters and a manufacturing facility in Macedon, New York; with a Culinary Innovation Center in Westmont, Illinois; and offices and manufacturing facilities in Williamson, New York; Pennsauken, New Jersey; and Corona, California. This role is located at our Pennsauken, NJ location. WHAT WE NEED The Facilities Maintenance Technician I is responsible for general building maintenance and repair of building mechanical systems including HVAC maintenance. Our Facilities Team follows a 2-2-3 shift schedule, providing a consistent routine for work-life balance. Shift hours for this role are 5:45am - 6:00pm. Sample 2-2-3 Shift Schedule: Week 1: Work Monday, Tuesday - Off Wednesday, Thursday - Work Friday, Saturday, Sunday Week 2: Off Monday, Tuesday - Work Wednesday, Thursday - Off Friday, Saturday, Sunday WHAT YOU WILL DO • Perform basic carpentry, electrical, plumbing, and painting., • Assist with HVAC maintenance, including filters, belts, greasing motors, and unit startup and shutdown., • Support fire and life safety checks, including alarms, sprinklers, and access controls., • Perform routine maintenance on air compressors and dryers., • Assist in maintaining water and steam systems, including heat exchangers, pumps, valves, and motors., • Complete preventive maintenance work orders and record labor and parts in the CMMS., • Assist with ground maintenance and operate tools safely., • Support vendors under supervision and ensure safe access and materials control., • Follow written and verbal instructions and read basic blueprints., • Report food safety and quality problems to personnel with authority to initiate action., • May respond to after-hours calls on rotation., • High school diploma or GED required., • One year of maintenance/technician experience in a manufacturing or industrial setting required., • Basic carpentry, electrical, plumbing, and painting skills., • Knowledge of OSHA safety standards and safe work practices., • Basic computer literacy and effective communication skills., • Exposure to HVAC, compressed air, water/steam systems preferred., • Familiarity with fire/life safety systems preferred., • Forklift/lift certification preferred., • Ability to calculate amounts of materials needed and to measure materials to be laid out, cut shaped, threaded, joined, etc.;, • Knowledge of electrical principles and theories;, • Ability to perform carpentry, electrical, plumbing, HVAC maintenance and general repairs;, • Capable of following the proper handling and storage of hazardous chemicals;, • Ability to wear personal protective equipment (bump cap, hair net, ear plugs, beard net (if applicable);, • Ability to apply basic computer and communication skills, math functions, and reasoning; You’ll also receive a comprehensive benefits package including a low premium and out of pocket cost medical, dental and vision coverage, 401k with company match, generous sick and vacation time, 9 paid holidays, birthday and floating holidays, volunteer time and more!

Summary You will serve as a RIGGER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will direct the operation of cranes and similar equipment and direct laborers and helpers.\n, • You will fabricate, install, and repair standing and running rigging and wire cable or fiber rope articles, such as slings, towing bridles, nets, rope ladders, and other ship and boat rigging and weight handling gear.\n, • You will assist in ship docking operations by laying out and handling lines and tackle, snubbing lines on cleats or bollards, hauling on lines with capstans, and performing similar duties.\n, • You will install beam clamps, gin poles, gallows frames, and other supporting structures; and use jacks, pulley blocks, chain falls, rollers, and similar equipment as necessary to move and position heavy items.\n, • You will perform and direct the placement, removal, or re-positioning of machinery, structural members of ships or buildings, heavy equipment, or other loads.\n, • You will estimate the size, weight, equipment capacity, and plans for clearance and safety factors.\n, • You will guide and direct apprentices and helpers in proper and safe rigging practices.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO DO THE WORK WITHOUT MORE THAN NORMAL SUPERVISION. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description Quality Control Inspector Fastener Dimensions, Inc. Pennsauken, NJ • $24 to $30 per hour - based on experience, • Full Time – 8:30 AM to 5:30 PM, • 6 Paid Holidays, • PTO, 401K, Sick Time, • Medical, Dental, Vision & Life Insurance, Short/long-term Disability Fastener Dimensions Inc. (FDI) is a family-owned, high-strength fastener manufacturer, with more than 30 years of experience supplying customers within the Aerospace & Defense industries. We have been growing at an aggressive pace and are looking to grow our team! Our Quality team is currently seeking a Quality Inspector to join us at our headquarters in Pennsauken. The Inspector is responsible for performing assigned test/inspection, calibration and product verification activities in accordance with the prescribed procedures/instructions, and documenting the results of these activities in accordance with QMS requirements. Key Roles & Responsibilities: • Perform test/inspection activities at prescribed intervals and frequencies, in accordance with provided instructions., • Complete test/inspection activities using the appropriate, calibrated test/inspection devices., • Ensure test/inspection devices that are past due for calibration are immediately removed from use., • Document results of test/inspection activities in accordance with applicable procedures/instructions., • Identify and segregate nonconforming product in accordance with Control of Nonconforming Product procedure., • Document calibration results in the database, and label devices according to calibration status., • Report any out of tolerance test/inspection devices to the device owner and Inspection Supervisor., • Collect test/inspection devices for outside calibration., • Prepare and assemble documentation for First Article Inspection., • Promote a Quality-Focused culture., • Actively and continually seek opportunities to improve test/inspection methods, by reducing effort and/or increasing efficiency., • Assist with Final Inspections, receiving Inspections, and Ship Todays, • Perform first piece and in process inspections. Additional Responsibilities: • Assist with identifying and resolving HSE isssues., • Assist in the creation of procedures and work instructions, as needed, for QC activities Education, Experience, Skills & Abilities: • Ability to read and understand blueprint/engineering drawings., • Understanding and working knowledge of GD&T., • Experience reading and understanding customer specifications., • Proficient at test/inspection techniques and methods., • Proficient in various inspection equipment, to include an optical comparator., • Experience with hand gage calibration., • Working knowledge of ISO-9001:2015, AS9100D, and/or API Q1., • Strong communication skills – verbal & written., • Attention to detail, critical thinker, problem-solving skills, • Team player / ability to work well in a team environment, • Proficient in SmartCerts and Quantum documentation systems is a plus.

Job Description Quality Control Piece Inspector Fastener Dimensions, Inc. Pennsauken, NJ • $24 to $30 per hour - based on experience, • Full Time – 8:30 AM to 5:30 PM, • 6 Paid Holidays, • PTO, 401K, Sick Time, • Medical, Dental, Vision & Life Insurance, Short/long-term Disability Fastener Dimensions Inc. (FDI) is a family-owned, high-strength fastener manufacturer, with more than 30 years of experience supplying customers within the Aerospace & Defense industries. We have been growing at an aggressive pace and are looking to grow our team! Our Quality team is currently seeking a Quality Inspector to join us at our headquarters in Pennsauken. The primary responsibilities for this position include: performing assigned test/inspection, calibration and product verification activities in accordance with the prescribed procedures/instructions and documenting the results of these activities in accordance with our quality management system requirements. The success of Fastener Dimensions is determined by our success in operating as a unified team. Every job is essential to fulfilling our mission to the people who trust and respect us. This individual will have a strong work ethic, knowledge of quality principles, a willingness to learn, and love learning new aspects of the high-strength fastener industry. Our ability to supply our customers with world-class products and service is our competitive advantage, and the individual filling this position must reflect the values and culture of our business. • This position reports to the Quality Manager, • Room for upward growth Our state-of-the-art facility, in NJ, enables us to produce some of the most complicated parts found on the market today. Key roles: • Perform test/inspection activities at prescribed intervals and frequencies, in accordance with provided instructions., • Document results of test/inspection activities in accordance with applicable procedures/instructions., • Identify and segregate nonconforming products in accordance with QMS procedure., • Prepare and assemble documentation for First Article Inspection., • Assist with final inspection and receiving inspections., • Perform first and in-process inspections. Education, Experience, Skills & Abilities: • Experience in Manufacturing Industry (Aerospace, Automotive, or Medical): Minium 3 years, • Strong attention to detail, and a high level of accuracy in handling critical documents., • Ability to read and understand blueprint/engineering drawings., • Understanding and working knowledge of GD&T., • Experience reading and understanding customer specifications., • Proficient at test/inspection techniques and methods., • Proficient in various inspection equipment, including an optical comparator., • Experience with hand gage calibration., • Working knowledge of ISO-9001:2015, AS9100D, and/or API Q1., • Strong communication skills – verbal & written., • Critical thinker, strong problem-solving skills, • Team player / ability to work well in a team environment., • Proficient in SmartCerts and Quantum documentation systems is a plus., • Proficient in Microsoft Office. Company DescriptionManufacturer with more than 30 years of experience in the Aerospace supply chain. Our facility in Pennsauken is set up to manufacture AN, MS, NAS and OEM bolts to print.Manufacturer with more than 30 years of experience in the Aerospace supply chain.\r\nOur facility in Pennsauken is set up to manufacture AN, MS, NAS and OEM bolts to print.

Summary You will serve as a SHEET METAL MECHANIC LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in Shop 17. Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will manufacture, assemble, install, remove, and repair ventilation, furnishings, and items including but not limited to nonstructural bulkheads and overheads.\n, • You will provide technical expertise on work instructions, interpreting instructions, and resolving problems for the sheet metal employees assigned to a project.\n, • You will conduct shipboard pre-work inspections to determine if the work is in compliance the technical work document requirements, and make recommendations to resolve complex problems.\n, • You will report to supervisors on the status and progress of work, nature of work delays and answer questions on overall work operations and problems.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination and undergo recurring physical examinations.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to obtain and maintain a current valid United States driver's license.\n, • You will be required to complete training, obtain, and maintain a government credit card for travel and travel-related purchases.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • You will be required to obtain and maintain a U.S. Passport.\n, • This is a Mission Essential position. You will be required to ensure organization or facility continuity of operations and/or completion of tasks that are considered essential to the mission designated by a local or command decision.\n, • This position requires the ability to climb vertical ladders and work in awkward positions and confined spaces.\n, • This position may require rotating shift work.\n, • This position requires the ability to lift and/or carry loads or items up to 50 pounds in weight.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. If you are unable to apply online and request information about the Alternate Application process, please contact the Department of Navy's Employment Information Center. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job ID: 714219BR Date posted: Feb. 10, 2026 Description:Industrial Machine Repair Mechanic Operate machine tools to fabricate parts as necessary. Install and troubleshoot all utilities associated with the manufacturing process. Must be proficient with computer and automated controls. General knowledge or reliability based maintenance practices. General Maintenance Mechanic tasks include any activity needed for maintaining the plant facilities and equipment. The successful candidate will perform general maintenance and service functions as required. Duties may include, but are not limited to: mechanical, electrical, pipe fitting, HVAC, carpentry and painting. Install, repair, maintain and fabricate manufacturing equipment and perform other general maintenance and service functions. Duties include, but are not limited to mechanical and electrical repairs, pipefitting, air conditioning, carpentry work and painting. Perform periodic inspections and tests and report findings. Receives general instructions from supervisors and notice of service required from supervisors and other plant personnel. Works from blueprints, sketches and oral instructions and specifications. Uses all hand tools, power tools, and other equipment necessary for completion of assignments. May direct other employees assigned to the job. Must have a primary skilled trade of manufacturing machine repair and a secondary skilled trade, one of which must be electrician, carpenter, pipe fitter or HVAC. Must be able to operate material handling equipment and rigging equipment. A working knowledge of machine tools is a plus. Basic Qualifications: Skilled Trade appropriate apprenticeship papers, journeyman's card, trade school diploma or contractor licenses is required. Five or more years of skilled trade work experience is required. A high school diploma or a GED equivalent is required. The candidate must supply all customary hand tools of the trade and is required to obtain and maintain a Department of Defense Secret security clearance. The successful candidate must be able to work independently or in a team. All candidates must be able to lift, bend and perform the normal activities of a physically challenging position. Candidate must be able to obtain and maintain a DoD secret security clearance. Obtaining a clearance requires US citizenship. Desired Skills: Experience in reliability based maintenance practices. Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Secret Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: Standard Monday to Friday 40 hour work week The base range for this position in New Jersey is $31.09 - $40.32. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. The wage range and benefits summary is a general guideline and is governed by the applicable collective bargaining agreement when extending an offer. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: RMS Relocation Available: No Career Area: Facilities Type: Full-Time Shift: First

Responsibilities No experience necessary, paid training is provided, and we pay your certification fees! ECS Limited is offering a unique opportunity for a talented Construction Materials Testing (CMT) Field Technician to join our Philadelphia, PA team and advance in a dynamic work environment. No prior experience is needed, as you'll work under the guidance of experienced professionals to learn to safely perform a variety of tasks. Responsibilities • Field Activities: Conduct observation, testing, and sampling of materials, including soils, aggregates, and concrete on construction materials testing project sites; Execute tasks based on project requirements under the guidance of senior technicians, staff professionals, and project managers., • Testing Procedures: Conduct routine field and/or laboratory tests for soils, aggregates, and concrete using various methodologies and testing equipment following industry standards and compliance., • Data Collection: Perform calculations and data reduction based on sampling, test results, and inspection; May assist with calculations, drafting, and other administrative duties as requested., • Communication: Maintain daily communication with site contractors, fellow technicians, and project managers; Communicate changing site conditions and additional requested testing to supervisor; Attend project meetings as requested; Assist with organization of field equipment and notify supervisor of broken or missing equipment as needed. As your experience grows, ECS will: • Support you in enhancing your professional skills. Required Qualifications • No experience required., • High school diploma or GED., • Must be able to lift a minimum of 85 pounds., • Must have valid driver's license and insurance., • Willing to develop understanding of heavy construction safety, practices, and procedures., • Willing to obtain knowledge of CMT principles and applications, as well as ASTM laboratory standards, leading to certifications in soils, concrete, and radiation safety., • OSHA 10 certification may be required., • Strong communication skills (speaking, reading, and writing). Military Qualifications: • The following US Military ranks will qualify for this position IF they also meet the education and licenses requirements from the above section titled "Required Qualifications": ECS Group of Companies (ECS) was founded in 1988 with the goal to raise the standards of professional engineering consulting. Today, we are a leader in geotechnical, construction materials, environmental and facilities consulting services. We are employee-owned with more than 3,000 employees in 100+ offices and testing facilities coast to coast. ECS is currently ranked #66 in Engineering News-Record's Top 500 Design Firms (April 2025), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025). For additional information about ECS, visit: ___ ECS is an Equal Opportunity Employer. To learn more, click___.

Job Description Join our team at Ward Heating and Cooling as an HVAC Senior Service Technician in Riverton, NJ, and become part of a legacy. Since 1974, we have been a trusted South Jersey HVAC company, delivering exceptional heating, air conditioning, and heating oil services. With you, we can make a difference in our community. We encourage growth and training to assist you with advancement. $65,000 - $75,000 Per Year + Bonus/Commission Candidates are required to have the following qualifications: • 7+ years' HVAC experience in residential and light commercial is mandatory., • Knowledgeable with both gas and oil heating systems for hot air, hot water boilers, steam boilers, central air conditioners, ductless air conditioners, heat pumps and more, • Important to have excellent troubleshooting abilities, • Conscientious employee who takes pride in their work, • Willing to be on-call approximately once every 3 weeks, • Must have clean and valid driver's license We encourage and assist our employees to improve their HVAC knowledge which is beneficial to their advancement. If you want to progress in the HVAC industry this company is for you. We are proud participant of the State of New Jersey's Apprentice Program. We offer great employee package: • Commissions, • Bonuses, • Health Insurance, • Vision Insurance, • Dental Insurance, • 401K Retirement Plan - Company Match, • Paid Vacation and Holidays Principals only. Recruiters, please don't contact this job poster. Company DescriptionAt Ward Heating and Cooling, we are proud to be South Jersey's leading HVAC company since 1974. With over 50 years of experience spanning four generations, we have developed extensive knowledge in the HVAC industry. Many other HVAC companies have sought our guidance and expertise due to this reputation. If you're ready to advance your career, Ward Heating and Cooling provides opportunities for both personal and professional growth.At Ward Heating and Cooling, we are proud to be South Jersey's leading HVAC company since 1974. With over 50 years of experience spanning four generations, we have developed extensive knowledge in the HVAC industry. Many other HVAC companies have sought our guidance and expertise due to this reputation. If you're ready to advance your career, Ward Heating and Cooling provides opportunities for both personal and professional growth.

Job Description Commercial HVAC Service Technician Location: Berlin, NJ Employment Type: Permanent Compensation: Up to $48/hour Join an industry leader that has been setting the standard in HVAC services since 1929. We are seeking an experienced Commercial HVAC Service Technician who is looking for long-term stability, excellent benefits, and the opportunity to grow with an employee-owned company. What We Offer • Fully equipped company truck (tools, EZ Pass, gas card included), • Company-issued cell phone and tablet, • Company-wide bonus program, • Team building events and outings, • Affordable Medical, Dental, and Vision insurance, • 401(k) program, • Company-paid Life Insurance, Short-Term, and Long-Term Disability, • Paid training programs and apprenticeships, • Paid vacation, holidays, and personal time, • Annual tool replacement allowance, • Apparel credit, • Referral bonus opportunities, • Strong work/life balance, • Employee-owned since 2014 (ESOP) Key Responsibilities • Troubleshoot and diagnose HVAC equipment and systems; replace defective parts as needed, • Perform preventive maintenance on a variety of HVAC systems to ensure proper operation and prevent failures, • Serve as a trusted advisor to customers, recommending necessary repairs, improvements, and upgrades, • Clearly present pricing, value, and benefits of recommended services, • Build and maintain strong customer relationships by understanding client needs and expectations, • Complete all assigned work safely, efficiently, and in compliance with company standards Qualifications • Minimum 6+ years of HVAC industry experience (commercial preferred), • Strong knowledge of HVAC theory, tools, methods, and equipment, • Must provide basic personal hand tools, • Ability to read and interpret specifications, blueprints, and drawings, • Ability to bend, stoop, lift, reach, and handle heavy equipment as required, • Willingness to participate in on-call rotation, • Experience working with the following systems:, • Rooftop units, • Cooling towers, • Chillers, • Heat pumps, • Air conditioners, • Hydronic systems, • Geothermal units, • Gas furnaces & boilers, • Oil furnaces & boilers If you're a skilled HVAC professional looking to join a respected, long-standing company that values its team Company DescriptionThe Bachrach Group (TBG) is a New York-based staffing and recruiting agency founded in 1974 by Richard Bachrach. The agency specializes in facilitating placements for professionals across various industries on a nationwide scale. TBG's overarching mission is to deliver tailored staffing solutions to its client base while simultaneously providing job seekers with career prospects. The company relies on its team of recruiters, who leverage their industry knowledge and networks to connect employers with top talent. TBG provides a comprehensive range of staffing services, including direct hire, temporary staffing, Recruitment Process Outsourcing (RPO), and contract staffing. The agency has consistently achieved notable rankings in Crain's lists, ranking as the largest search firm in NYC since 2020.The Bachrach Group (TBG) is a New York-based staffing and recruiting agency founded in 1974 by Richard Bachrach. The agency specializes in facilitating placements for professionals across various industries on a nationwide scale. TBG's overarching mission is to deliver tailored staffing solutions to its client base while simultaneously providing job seekers with career prospects. The company relies on its team of recruiters, who leverage their industry knowledge and networks to connect employers with top talent. TBG provides a comprehensive range of staffing services, including direct hire, temporary staffing, Recruitment Process Outsourcing (RPO), and contract staffing. The agency has consistently achieved notable rankings in Crain's lists, ranking as the largest search firm in NYC since 2020.

Job Description We are seeking an apprentice level and Mechanic level Duct sheet Metal installer for a great project. In this key role, you will be responsible for the installation and maintenance of high-quality sheet metal systems, with a primary focus on commercial and industrial HVAC ductwork. If you take pride in precision work and thrive in a collaborative, project-driven environment, we encourage you to apply. Key Responsibilities: • install, assemble, and repair large-scale commercial/industrial sheet metal ductwork and components., • Accurately read and interpret blueprints, schematics, and shop drawings to guide project work., • Safely operate equipment essential to the trade, including electric scissor lifts., • Collaborate effectively with project teams and other trades to ensure timely and successful project completion., • Minimum of 2 years of hands-on experience in commercial/industrial sheet metal ductwork installation., • Proven ability to read and understand construction blueprints and technical drawings., • Proficiency in operating industry equipment (e.g., electric scissor lifts)., • Strong problem-solving skills and a meticulous eye for detail., • Ability to work effectively both independently and as part of a team., • Experience with welding techniques., • Knowledge of gas piping installation., • Job Type: Full-time, Temp-Perm, • Schedule: Monday-Friday, 8-hour shift

Summary You will serve as a RIGGER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will provide technical trade leadership to a small working group.\n, • You will ensure necessary materials are available, and tools and equipment are in good, safe operational condition to accomplish work.\n, • You will recommend specific task assignments for each member of the work crew.\n, • You will instruct subordinates on any unusual work steps or requirements, including the safe operation of equipment.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. Vacancies filled from this announcement may be filled at any grade level listed. If selected below the full performance level, you may be noncompetitively promoted to the next higher grade level after meeting all regulatory requirements, and upon the recommendation of management. Promotion is neither implied nor guaranteed. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

The Evergreens Category: Maintenance & Facilities Position Type: Full-Time 309 Bridgeboro Road US-NJ-Moorestown Join our team and grow with us both professionally and personally! Next day pay: Work today, get paid tomorrow with our PayActiv benefit! We strongly believe in providing our team members with great benefits, such as tuition reimbursement, commuter benefits, scholarship awards, professional development programs, university partnerships, referral and discount programs, appreciation events, wellness initiatives, and much more! Acts is currently seeking qualified candidates for our Maintenance Technician (Skilled) position. In this role, you will be responsible for completing assigned work orders by applying general knowledge of carpentry, plumbing, electrical, and HVAC. Supports the preventative maintenance schedule. The ideal candidate will meet the following requirements: • High school diploma or equivalent, • 3-5 years of technical maintenance experience, • General mechanical knowledge in electrical, plumbing, carpentry, painting, and grounds maintenance, • EPA Certification for HVAC is required, • Must possess and maintain a valid driver's license Team members are eligible for a generous benefit package including health benefits (medical, prescription, dental and vision), flexible spending accounts, life insurance, disability programs, 401(k) plan (with 4% company match after one year of employment), paid time off and holidays, and much more! Eligibility may vary based on status. For more information or to apply, visit us at and join our Talent Network to receive e-mail alerts with new job opportunities that match your interests! Acts Retirement-Life Communities is one of the largest not-for-profit owners, operators, and developers of resort-style continuing care senior living communities, including independent living, assisted living, and skilled nursing. The Acts family proudly consists of 28 communities in 9 states, and over 8,500 team members. Acts provides residents with a lifestyle that includes on-campus conveniences, services, and amenities such as casual and fine dining venues, beauty salons, fitness centers, security, healthcare, activity programs, and much more. Our team members are inspired by a culture of Loving-Kindness, and we are fully committed to appreciating the array of backgrounds and talents demonstrated by our team members. Acts is an equal opportunity employer that is committed to diversity and inclusion in the workplace. Qualified applicants will receive consideration for employment without regard to race, color, religion, age, gender, gender identity or expression, sexual orientation, marital status, national origin, non-disqualifying disability, veteran status, or any other characteristic protected by law. Acts is committed to providing reasonable accommodations for candidates with disabilities in our hiring process. $20.19 - $24.91 / hour. Starting rate will vary based on skills and experience.

Career Fair! Come join us for in-person interviews, job offers will be given out on the spot! See below for details. \n Friday March 13th, 2026 \n 10:30 a.m. — 1:00 p.m. \n Philadelphia Navy Yard \n S. 19th & Kitty Hawk Ave Philadelphia, PA 19112 \n Follow Signs for Entrance \n What to bring: \n Valid form of I.D \n Multiple Resume \n \n Responsibilities include but are not limited to: \n\n • Moves/position large, complex components (i.e. 23' propellers) into open and confined spaces using a crane or other rigging materials.\n, • Estimating weights and centers of gravity prior to lifting to ensure safety during handling.\n

Job Description We are a leading tooling manufacturer for the packaging industry, dedicated to outputting quality products and world-class service. Our company has been in operation for over 25 years and specializes in steel-rule cutting dies and printing plates. Currently, we are seeking an individual to join our cutting die production team as an Assembler. It is an entry-level position that offers tremendous growth potential, as well as a competitive salary and benefits package. If you have a desire to grow, enjoy learning, and want to be part of an organization that values and invests in its team, we may be the right place for you! Job Responsibilities Include: • Reading and understanding assembly drawings, • Preparing materials, • Aligning materials and assembling parts to build more complex units, • Adhering to job specifications, • Checking output to ensure product quality, • Creating proofs of each completed product, • Must be available for second shift (12pm to 8pm) and overtime, • Must be able to measure components to a 1/32nd of an inch with a ruler or measuring tape, • Must be able to lift product weighting up to 60lbs unassisted, • Must be able to use hand tools, • Must be comfortable with power tools, • Must be organized and detail oriented, • Must have a mechanical aptitude and basic math skills, • Must be able to follow verbal and written instructions

Position Overview We are seeking an experienced, fully-remote, Estimator with a strong background in multifamily wood-frame construction to support a growing pipeline of projects across southern New Jersey and the greater Philadelphia area. This individual will play a key role in preconstruction, working closely with internal teams and subcontractors to develop accurate, competitive project estimates. The ideal candidate will bring not only technical estimating expertise, but also established relationships with subcontractors and vendors in the Southern New Jersey market. Key Responsibilities • Prepare detailed cost estimates for multifamily construction projects, • Perform quantity takeoffs and pricing for labor, materials, and equipment, • Solicit, evaluate, and level subcontractor bids, • Leverage existing subcontractor relationships to ensure competitive and accurate pricing, • Collaborate with project management and leadership during preconstruction phases, • Analyze drawings, specifications, and other documentation to prepare time, cost, materials, and labor estimates, • Identify cost-saving opportunities and value engineering options, • Maintain and update cost databases and historical pricing, • Participate in bid reviews, scope alignment, and project handoffs Qualifications • 3+ years of estimating or preconstruction experience in multifamily construction, • Strong experience with wood-frame / stick-built construction (Type III / Type V), • Ability to read and interpret construction drawings and specifications, • Strong analytical, organizational, and communication skills, • Experience working in a remote environment is a plus Compensation & Benefits • Base Salary: $80,000, • Remote work environment, with travel potentially once a month., • Stable pipeline of multifamily projects

As a global marketing experience company, Quad’s goal is to help our clients win every day. We use our data-driven integrated marketing and manufacturing platform to streamline solutions for our clients, reduce friction and enhance their marketing spend effectiveness. We’ve built a rich legacy by believing in our people, allowing them to act like owners and to take charge of their own success. Whether an operator, sales rep, a graphic artist or a clinician, we’re all driven to perform at our best— for ourselves and our clients. At our core, we’re a company that believes we can always create a better way. Quad, a global leader in the commercial printing and direct marketing industry is seeking a Commingle Mechanic to work in our rapidly expanding East Coast Digital Print and Commingling Supercenter in Westampton, NJ. Pay range is $24.80 - $37.20 These positions are responsible for performing skilled mechanical maintenance work in a fast-paced environment-- including repair, inspection, modification, and improvement of Letter Sorter equipment. The Commingle Mechanic plays an essential role in helping the plant provide high quality product and efficient service to our customers by minimizing operational downtime. Full-time positions are available on the following shifts: D shift – Sunday – Thursday and every other Friday 11 PM – 7 AM. Responsibilities include, but are not limited to: Train and assist operators in set up and troubleshooting operator problems; Train Workers in operational techniques and operational adjustments; Observe and listen to operating machines and equipment to diagnose machine malfunctions and determine need for adjustment or repair; Study sketches, machine specifications or parts to determine type and dimensions of parts needed; Maintain inventory of parts and request part orders when limits are reached; Dismantle machine or equipment to examine parts for defect or to remove defective parts; Replace defective part with new part or repair part needed; Assemble and test machine to verify correction of malfunction; Maintain machine by following PM schedule; Communicate any foreseeable production problems (material or mechanical in nature); Comply with all quality, safety rules, and regulations as well as Standard Operating Procedures; Performs other related duties as assigned or required. Qualifications: Prior mechanical experience and/or training; Problem solving/Troubleshooting is a plus; Ability to move about to inspect/repair machines including climbing, bending, and squatting in tight areas are also required; Basic computer skills are required; Good verbal and written comprehension, the ability to thrive in a team environment, and work independently. Prior printing industry experience or manufacturing experience (such as laborer, assembly, or distribution), experience in Direct Mail preferred. We offer excellent benefits to eligible employees, including 401(k), holidays, vacations and more. Quad is proud to be an equal opportunity employer. We are committed to creating a place of belonging — a space where employees do not need to sacrifice who they are to exist and grow in our workplace. Quad does not discriminate on any unlawful basis including race, religion, color, national origin, disability, gender, gender identity, sexual orientation, age, marital status, veteran status, genetic information, or any other basis prohibited by applicable federal, state, or local laws. Quad also prohibits harassment of applicants and employees based on any of these protected categories. Drug-Free Workplace

Job Title: Maintenance Mechanic Job Code: 32720 Job Location: Camden, NJ Schedule: 9/80 Job Description: We are seeking a skilled Unionized Maintenance Mechanic to join our team. The successful candidate will perform a wide range of building and equipment maintenance duties, including electr

Job Description Are you a dynamic housekeeper with an eye for detail and a passion for organization? Do you thrive in a supportive team environment and aim to deliver superior results every day? If you answered yes, then this opportunity at Forty2 might be perfect for you! About Forty2 Forty2 is a boutique apartment property management firm dedicated to hiring only the highest caliber talent. We prioritize superior service and aim to create a welcoming and pristine living environment for our residents. Responsibilities • Prioritize Tasks: Efficiently manage and prioritize multiple responsibilities to ensure a spotless living environment for our residents., • Housekeeping Excellence: Showcase your energy and knack for organization to maintain the highest standards of cleanliness., • Team Collaboration: Work closely with a dynamic team to achieve collective goals and provide exceptional service to our residents., • Dispose of trash and recycling in designated areas., • Restock cleaning supplies and other items as needed., • Maintain cleanliness in common areas such as hallways, lobbies, laundry rooms, and recreational areas. (Dust furniture, vacuum carpets, mop floors, and clean windows.), • Report any maintenance issues, damages, or safety hazards to management., • Follow all health and safety regulations and use cleaning chemicals responsibly., • Ability to prioritize tasks effectively., • Exceptional organizational skills., • High-energy and determination to shine., • Professional Appearance: Maintain a neat and professional appearance at all times., • Team Player: Strong ability to work well within a close-knit team., • Health & Safety:, • Ability to pass background checks and drug testing. Job Posted by ApplicantPro

Health Insurance Dental Insurance 401(k) Tuition Reimbursement Job Details Mechanical Engineer II (Hybrid) – Healthcare & Sciences Construction | HVAC Design & Energy Modeling Job Description: Join a dynamic, multi-disciplinary Healthcare & Sciences division as a Mechanical Engineer II, where you'

ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required. • Follow all Hanwha Philly Shipyard rules and regulations, • Selects cables, ropes, pulleys, winches, shackles, clamping devices, blocks, synthetic slings and sheaves, according to weight and size of load to be moved, • Must have knowledge of various size wire ropes breaking strengths, • Attaches pulley and blocks to fixed overhead structures such as beams, ceilings, and gin pole booms with bolts and clamps, • Attaches load with grappling devices such as loops, wires, ropes, and chains to crane hook, • Gives directions to Overhead Crane Operator or Hoisting Engineer engaged in hoisting and moving loads to ensure safety of workers and material handled, • Sets up, braces, and rigs hoisting equipment, • Use proper hand signals to signal crane operators and radio communication with crane operators, • Visually inspect all rigging gear such as wire rope, shackles synthetic slings, chain hoist, come-alongs, hooks, and all other rigging gear to insure that safety is always first, • Perform other related duties as required and assigned COMPETENCIES • Ability to communicate effectively, verbally, with hand signals and by radio, • Thoroughness, • Flexibility, • Integrity, • Strategic thinking, • Willingness and ability to work as a team member SUPERVISORY RESPONSIBILTY This position has no supervisory responsibilities. WORK ENVIRONMENT Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions. *Hanwha Philly Shipyard is a TOBACCO FREE facility. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. POSITION TYPE/EXPECTED HOURS OF WORK This is an on-site, full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. PREFERRED EDUCATION AND EXPEREIENCE • Minimum High School or GED Diploma, • Minimum 3 years structural steel rigging or erecting, • Fundamentals of rigging, basic working knowledge of crane and rigging gear, • High Reach Forklift experience, • Knowledge of the proper hand and radio signals for all cranes, • Knowledge of tying knots, • Knowledge of proper hand signals to signal crane operators and radio communication with crane operators, • Knowledge of how to visually inspect all rigging gear such as wire rope, shackles synthetic slings, chain hoist, come-alongs, hooks, and all other rigging gear to ensure that safety is always first, • Must have knowledge of various size wire ropes’ breaking strengths, • Some training may be available to keep educated on new OSHA or other safety guidelines and new industry developments OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.

Summary You will serve as a SHIPFITTER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: If you're within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will provide guidance and direction to Shipfitter shop personnel.\n, • You will provide instruction for nuclear or non-nuclear work of the Structural Group personnel in the skills of the trade.\n, • You will prepare analysis of trade requirements through the use of audits, surveillance, and/or incident reports.\n, • You will provide interpretations and problem resolution for shop employees.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skill, and/or ability required: • Ensure all Hanwha Philly Shipyard safety procedures, rules and regulations are followed and met, • Install pipes and different pipe components, • Assemble, test and install pipe packages, • Pipe welding, • Manufacture and install foundations, • Assemble, test and install different skids, • Install fittings and equipment, • Pipelines manufacture and maintenance, • Weld flanges, collars, penetrations, skid frames, foundations, some pipes, • Assemble, connect and test pipe lines between skids and equipment to functional systems, • Perform manufacturing of fitting pipe models, • Install and align ship machinery, propulsion deck, and steering using precision measurement tools, • Perform as an outside machinist, • Use resins, • Read and interpret installation drawings, • Take care of cleaning and arrangement of work space, • Participate in developing working methods and in preparing investments, • Secure competency of his/her work, • Responsible for carrying out indicated tasks according to the Shipyard’s general rules and specified working instructions, • Performs other related duties as required and assigned. COMPETENCIES • Self-management, • Thoroughness, • Flexibility, • Integrity, • Willingness and ability to work as a team member SUPERVISORY RESPONSIBILTY This position has no supervisory responsibilities. WORK ENVIRONMENT Environmental exposures are similar to those found in most heavy industrial settings and may include noise, heat, cold, vibration, dust, fumes and smoke. Work may be carried on indoors or outdoors, and may involve exposure to inclement weather conditions. Hanwha Philly Shipyard is a TOBACCO FREE facility. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A range of motion sufficient to perform general lifting, carrying, bending, climbing, working at heights, extended walking or standing, etc. is required. Employment in this position is contingent upon passing the medical examination. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. POSITION TYPE/EXPECTED HOURS OF WORK This is a full-time, safety-sensitive position. Standard days and hours of work vary by department, days and hours determined by department schedules. EDUCATION AND EXPERIENCE • High School or Vocational School, • 3 or more years’ professional experience in:, • Shipyards with shipbuilding production and/or ship repair, • Ship machinery installation, • Pipe fitting/plumbing, • Steel fabrication, • Welding certification required in FCAW, GTAW, SMAC and SMAW, • Additional welding certifications per vessel type and classification requirements, • Basic knowledge of machine mounting, • Understanding of blue prints, 3D-isometrics, schemes and technical documents, • Knowledge of different materials like steel, stainless steel, CuNiFe, etc., • Knowledge of different components as valves, flanges, machine components, etc., • Skilled to utilize typical pipefitting, machine fitting, and welding tools and equipment, • Knowledge of work safety, • Creativeness and initiative attitude in work OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time or without notice. Hanwha Philly Shipyard is committed to equal opportunity for all applicants. The recruitment, selection, employment and training of employees during employment, shall be without discrimination because of race, color, religion, national origin, gender or age-except that the applicant must meet the minimum age requirement. Hanwha Philly Shipyard does not, and will not, discriminate because of the disability of such individual.

Career Fair! Come join us for in-person interviews, job offers will be given out on the spot! See below for details. \n Friday March 13th, 2026 \n 10:30 a.m. — 1:00 p.m. \n Philadelphia Navy Yard \n S. 19th & Kitty Hawk Ave Philadelphia, PA 19112 \n Follow Signs for Entrance \n What to bring: \n Valid form of I.D \n Multiple Resume \n \n Responsibilities/Knowledge include but are not limited to: \n Prepares component or area for welding. includes cleaning, layout, and setup. \n Welds using SMAW, GMAW, and GTAW. Welds can be inspected per VT and PT. \n Operates arc welding equipment, oxyfuel cutting torch or other cutting methods to ensure alignment or fit. \n Understand safety precautions associated with welding. \n Reads and interprets welding symbols from blueprints, specifications, and sketches. \n Sets up machines and equipment. \n \n Application Question(s): \n\n • Are you a US Citizen?\n, • Are you able to obtain a Secret Security Clearance?\n, • Do you have experience with GMAW-P and GTAW welding processes with experience on materials such as Carbon steel, Stainless steel, Nickel-Copper, and Aluminum?\n, • Welding: 3 years (Required)\n

Summary You will serve as a MARINE MACHINERY MECHANIC LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Duties Help \n • You will apply a variety of methods, procedures, and techniques to layout, install, align, overhaul, repair, and maintain numerous types of marine machinery, equipment, and systems.\n, • You will utilize and apply standard formulas, shop mathematics, trade theories, and industry practices in calculating needed materials and problem solving.\n, • You will utilize various test equipment and measuring devices such as alignment scopes, verniers, micrometers, precision levels, transits, strobe tachometers, bearing bridge gauges, flow meters, hydrostatic testers, and vibration analyzers.\n, • You will set up and operate machine tools such as small lathes, milling machines, drill presses, and precision grinders to manufacture component parts or remachine existing parts such as bushings, bearings, seals, couplings, and pistons.\n, • You will utilize machine tools for onsite milling, grinding, boring, facing, and drilling, and the use of various other portable machine tools to accomplish repairs.\n, • You will disassemble, repair, and rebuild components and assemblies such as shafts, propellers, rudders, engines, and sea valves.\n, • You will operate machinery and equipment for launching and arresting gear systems, missile handling and launch systems, torpedo tubes, periscopes, antennas, sonar, and radar equipment, and shipboard equipment.\n, • You will interpret and apply the requirements contained in technical manuals, shop directives, multiview blueprints, and other documents in determining critical dimensions and key reference points.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: SALARY: Puget Sound Naval Shipyard: WA: CA: Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Portsmouth Naval Shipyard: ME: CA: Norfolk Naval Shipyard: VA: PA: Trident Refit Facility, Bangor, WA: This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.