Trabajos aviation safety en White Plains, New YorkCrear alertas

Persons employed as a GSE Mechanic is expected to: • Inspect and maintain ground support equipment used in operations., • Troubleshoot, repair and/or overhaul ground support equipment., • Check and service ground support equipment with fuel, water, oil and hydraulic fluid., • Diagnose problems using test equipment and applicable manuals., • Build and assemble machines or mechanical components according to requirements., • Inspect machines, engines, transmissions etc. and run diagnostic tests to discover functionality issues., • Conduct repairs aiming for maximum reliability., • Perform thorough maintenance on machinery, equipment and systems., • Clean and apply lubricants to machinery components., • Replenish fluids and components of engines and machinery., • Provide consultation on correct maintenance and preventative measures to machine or vehicle users., • Keep logs of work and report on issues, • Completion of GSE paperwork as required. Unless the accommodation would impose an undue hardship on the operation of our business, we will endeavor to make a reasonable accommodation to the known limitations of a Team Member due to pregnancy, childbirth, and related medical conditions or of a qualified applicant with a disability. If reasonable accommodation is needed to perform essential job functions and/or to receive other benefits and privileges of employment, please contact (insert). The following are essential to the job, in addition to those listed above and on the chart in this description. Certain functions may be performed in varying weather and environmental conditions, such as precipitation, extreme temperatures, jet engine fumes, dust, and noise. The tasks are performed inside and outside near stationary and moving aircraft (including spinning propellers and engines). • Frequently lift and/or move up to 75 pounds., • Read, write and fluently speak and understand the English language., • Ability to read and comprehend instructions, short correspondence and memos., • Write routine business correspondence., • Effectively present information in one-on-one and small group situations to customers, clients, supervisor and employees., • Deal with problems involving several concrete variables in standardized situations., • Apply common sense understanding to carry out detailed but uninvolved written or oral instructions., • Add, subtract, multiply and divide in all units of measure using whole numbers, common fractions and decimals., • Excellent knowledge of machinery and hydraulic, electrical and other systems and their components, • Aptitude in using various hand tools (screwdrivers, hammers etc.) and precision measurement tools (e.g. calipers), • Ability to follow established procedures and practices and read instruction, blueprints etc., • A strong commitment to all health and safety guidelines, • Very good communication skills, • A problem-solving ability, • Very good physical strength and stamina To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. • High School diploma or GED plus one (1) year experience and/or equivalent combination of education and experience, • Minimum of 18 years of age, • Ability to pass background checks (criminal and motor vehicle), drug tests, receive and maintain issuance of an airport security badge, and be insurable by the company's insurance policies., • Must be legally authorized to work in the country of employment., • Prior GSE or heavy equipment experience preferred., • Must have your own tools., • Must possess valid driver’s license., • Certification from a vocational school or completion of apprenticeship is a definite plus., • Valid certification (ASE) preferred. Pay ranges vary based on multiple factors, including, without limitation, skill sets, education, shift worked, responsibilities, seniority, geographical market, merit, output, productivity, prior training or experience, and travel. The pay starting rate for this position is 26.00/ hour, per the collective bargaining agreement. Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin or protected veteran status. With more than 225 locations worldwide, Signature Aviation is the largest global network of private aviation terminals, delivering safe, convenient, and elevated experiences to those we serve. As a premier hospitality organization and a certified Great Place to Work™, we are committed to redefining private air travel. Our nearly 6,000-strong team of aviation experts and enthusiasts is dedicated to delivering excellence to our guests and communities, and it starts with taking care of our team. Signature provides a variety of benefits, programs, and resources to support our team members’ overall well-being and professional development. We proudly volunteer and give back, focusing on elevating the neighborhoods where we operate, empowering the next generation of aviation professionals, and supporting our veterans. From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation. Our Benefits: • Medical/prescription drug, dental, and vision Insurance, • Health Savings Account, • Flexible Spending Accounts, • Life Insurance, • Disability Insurance, • 401(k), • Critical Illness, Hospital Indemnity and Accident Insurance, • Identity Theft and Legal Services, • Paid time off, • Paid Maternity Leave, • Tuition reimbursement, • Training and Development, • Employee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.

Job Description Fabrication Assembler Job Description About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers many the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits: Include employer-funded health care, life insurance, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Job Details: • In the office- Monday through Friday 7:45 am to 4:15 p.m., • Hourly Rate: $24-27 salary commensurate with experience. Duties/Responsibilities: Responsible for all Safe Flight sheet metal requirements including small quantity production work orders, engineering projects and prototype work. Responsible for riveting and air press work, including riveting autothrottle support assembly all detectors and pressing clinch nuts, standoff, etc. for all departments. Sheet Metal Work, chassis and Riveting. Read and interpret blueprints to fabricate metal parts. • Work with various types of sheet metal to produce high-quality products. Operate power tools and machinery. • Utilize micrometers for precise measurements and conduct quality control checks. Understand and follow schematics for assembly. • Keeps equipment operational by completing preventive maintenance requirements, following manufacturer’s instructions, troubleshooting malfunctions, and calling for repairs., • Documents actions by completing production and quality forms., • Maintains a safe and clean work area and equipment. Assembler Skills/Qualifications: • High school diploma or GED, • Dexterity and hand-eye coordination, including the ability to grasp, manipulate, and assemble parts and components that are often very small, • Proficiency in blueprint reading and interpreting, • Ability to use micrometers and other precision measuring tools, • Previous manufacturing experience, • Proven experience as a sheet metal fabricator or similar role, • Strong attention to detail and quality craftsmanship #hc194737

Job Description Mechanical/Electro- Assembler About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers the majority of the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits: Include employer-funded health care, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Job Details: On site - White Plains, NY- Monday through Friday, 40 hours per week Hourly Rate: $20 to $22 per hour- salary will compensate for experience Duties/Responsibilities: • Establish a working partnership and a positive relationship with suppliers., • Perform assembly tasks according to established procedures and engineering drawings. Utilize small hand tools, such as soldering irons, wire strippers, crimpers, etc., to assemble components accurately., • Create wire harnesses by routing and securing wires, cables, and connectors following specific guidelines and wiring diagrams., • Skillfully strip wire insulation to the required length while maintaining precision and quality standards., • Use appropriate crimping tools to secure connectors, terminals, and contacts onto wires, ensuring reliable electrical connections., • Assemble electronic components onto printed circuit boards (PCBs) using industry-standard techniques and following assembly instructions., • Demonstrate excellent soldering skills by accurately soldering components onto PCBs, wires, or other electronic parts. Ensure solder joints are of high quality and meet the required specifications., • Performs other related duties as assigned. Required Skills/Abilities: • Excellent soldering skills with the ability to handle small hand tools effectively. Proficient in reading and interpreting engineering drawings, wiring diagrams, and assembly instructions., • Demonstrates fine eye/hand coordination and meticulous attention to detail, ensuring precision and accuracy in assembly tasks., • Strong commitment to producing high-quality workmanship and adherence to quality specifications., • Proficient with Microsoft Office Suite or related software. Education and Experience: • Proven experience in electronic and electro-mechanical assembly, with a strong focus on soldering, wire harnessing, wire stripping, crimping, and PCB assembly. Other duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Equal Opportunities Employer Safe Flight provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. #hc234100

Job Description Technical Service Representative Position About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers the majority of the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits: include employer-funded health care, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Job Details: Work schedule: Monday through Friday 8:00 am to 4:45 p.m. (onsite) Salary range: $80,000 to 110,000 (pay will be commensurate with experience) Duties/Responsibilities: • The Technical Services Specialist will be the first point of contact for our customers, guiding them through our hardware and software features and capabilities, ensuring their satisfaction., • Serve as first point of contact, supporting installation and service guidance to ensure seamless and successful implementation of our technologies., • Experience in the aviation industry., • Play a crucial role in troubleshooting issues, providing timely solutions, and contributing to the overall success of our customers’ experience., • Previous experience in troubleshooting aircraft electrical and avionics systems., • Experience using test equipment to analyze electrical circuits., • Demonstrate familiarity with software programming languages, a bonus., • You must be willing to travel and participate in flight testing of new products if required., • Strong computer skills and familiarity with Microsoft Office Applications preferred., • Demonstrate effective communication and people skills., • Support the Repair Department, Production, Electrical Engineering, Software Engineering, Testing Engineering and Systems Engineering., • Train our customers in all Safe Flight products. As part of that responsibility, you will also write applicable Guides/Manuals/Procedures., • Safe Flight has one shift; Technical Services will manage all after-hour communications., • Associate degree or College degree or Military experience preferred., • Previous experience in troubleshooting aircraft electrical and avionics systems., • Four years’ experience in electrical and avionics systems troubleshooting and repair (Military, OJT or College) required., • Must be eligible to acquire security clearance. Familiarity with Microsoft Office Applications preferred. Required Skills/Abilities: • Associate degree or College degree or Military experience preferred., • Previous experience in troubleshooting aircraft electrical and avionics systems., • Four years’ experience in electrical and avionics systems troubleshooting and repair (Military, OJT or College) required., • Must be eligible to acquire security clearance. Familiarity with Microsoft Office Applications preferred. Other duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Equal Opportunities Employer Safe Flight provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. #hc232353

Are you ready to take your career to new heights? We are seeking high-energy, driven individuals who thrive in fast-paced environments and are excited by challenge, teamwork, safety, and personal growth. This is not a typical job. It is a full-time, long-term career opportunity in a dynamic guest-facing environment with paid instructor training, advancement potential, commission opportunities, and hands-on career development. • Competitive hourly pay, plus commission opportunities and milestone bonuses, • Paid, industry-leading instructor training provided, • Relocation stipend provided for both training and final placement, • Employee referral bonus program, • Comprehensive medical, dental, and vision coverage, • Paid time off, including vacation, holidays, and paid parental leave, • Tuition reimbursement program to support continued learning and career advancement, • Confidential wellness coaching, mental health support, and employee assistance resources, • Employee discounts on venue services, merchandise, and programs, • Ongoing leadership development and operational training, • Long-term career advancement opportunities, • Must be at least 18 years old, • Must be available to work full-time, • Must be willing and able to temporarily relocate for several months of paid training, • Must be able to pass a post-offer employment test assessing physical strength, stamina, endurance, and agility, • Must be available to work weekends, holidays, and flexible operating schedules, • Strong communication skills with the ability to engage guests in a positive, professional, and confident manner, • Team-first mindset with the ability to work in a fast-paced, high-energy environment, • Strong safety awareness with the ability to follow procedures, enforce standards, and make sound decisions under pressure, • Friendly, approachable personality with strong guest service instincts, • Physically capable of performing active, hands-on work for extended periods, • Ability to remain calm, focused, and professional in physically demanding situations, • No prior instructor experience required; paid training is provided, • Experience in fitness, personal training, coaching, athletics, sports, active recreation, or physically demanding work environments, • Background in competitive sports, gymnastics, dance, performing arts, martial arts, climbing, military service, aviation, motorsports, circus arts, aerial performance, or other high-performance environments, • Experience working in fast-paced, customer-facing environments such as entertainment, attractions, recreation, hospitality, fitness, retail, restaurants, events, or guest services, • Exposure to safety procedures, CPR, First Aid, emergency response, guest waivers, risk management, or compliance standards, • Strong interest in sales, guest engagement, repeat business, memberships, packages, and building client relationships, • Desire to grow into higher-level instructor, leadership, training, or management opportunities

Job Description About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers the majority of the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits include employer-funded health care, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Position: Industrial Painter Full-Time: Hours from 7:45 am to 4: 15 p.m. Onsite Monday through Friday Hourly rate: $20-$22/hour 40 hours per week Duties to include painting multi-angled electromechanical assemblies, printed circuit board conformal coating and various types of part marking. Key responsibilities: Surface preparation: • Cleaning, sanding and removing old paint from surfaces to ensure proper paint, • adhesion., • Paint mixing: Accurately mixing paints and coatings according to specifications to achieve the desired color and • consistency., • Application techniques:, • Applying paint using various methods including brush, roller, and spray gun depending on the, • surface and project requirements. Quality control: Inspecting painted surfaces for defects and ensuring compliance with quality standards. Safety procedures: • Adhering to safety protocols including wearing appropriate personal protective equipment (PPE), • and working in well-ventilated areas. Technical knowledge: Understanding different painting types, their properties, and • application methods., • Attention to detail: Ability to achieve a consistent and high-quality finish., • Problem-solving skills: Identifying and resolving issues during the painting process Safety awareness: Commitment to following safety regulations and procedures Other duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Equal Opportunities Employer Safe Flight provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. #hc234101

Job Description Who Are We Looking For? An exceptional Senior Captain to join our Aviation Department, fostering a safety-first culture while delivering unparalleled service efficiency. This role is central to our mission of ensuring the highest standards of safety and customer service, taking command of flights and making pivotal decisions for the operation of the aircraft. Your Role: • Establish and maintain absolute respect and trust as the Pilot in Command, demonstrating deep technical expertise in aircraft operations and maintenance interface., • Analyze weather conditions at all relevant points to make critical flight-related decisions, including initiating, delaying, or canceling flights, and adjusting routes as necessary., • Deliver exemplary customer service in line with our company’s standards and government regulations., • Ensure the aircraft is impeccably maintained, clean, and ready for flight, fully stocked for passenger safety and comfort., • Adhere to schedules and operational guidelines as per company standards and government regulations., • Craft detailed flight and contingency plans, manage weight and balance calculations, and ensure thorough preflight inspections., • Follow all Standard Operating Procedures (SOPs) with diligence, including the consistent use of checklists., • Lead and manage the flight and cabin crew, fostering team cohesion, sharing knowledge, mentoring, and evaluating for potential advancement., • Exhibit the highest levels of integrity, professionalism, and honesty., • Contribute to special projects and undertake additional duties as needed. What You Need to Succeed: • Bachelor's degree., • G550 Type Rating essential; G650 Type Rating highly preferred., • Valid FAA Class I medical certificate., • A preferred background of 5000 total flying hours, including 2000 in turbine aircraft, 1500 as Pilot in Command, and 500 in large cabin corporate aircraft., • Experience in 14 CFR Part 91 or 135 operations, with comprehensive understanding of 14 CFR Part 91, ICAO Standards, and other international regulations., • Profound knowledge of aircraft operations, customer service excellence, CFRs, ICAO Standards, international regulations, company SOPs, and meteorological information., • Preferred experience with large cabin Gulfstreams., • Excellent technical, interpersonal, and leadership skills., • Proven track record of a strong relationship with the FAA., • Eager for professional growth within a dynamic team. Special Requirements: • Flexibility to work nights, weekends, holidays, and on a varied schedule in a 24/7 operational environment. Salary Range: $164,000 - $280,000 USD

Job Description Incoming Electrical Inspector About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers the majority of the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits include employer-funded health care, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Job Details: Hourly rate $23-$30 per hour- Salary will be commensurate with experience Monday through Friday 7:45 am to 4:15 p.m. in office. Job Summary: As an Incoming Electrical Inspector, you will be responsible for inspection of incoming electronic material at Safe Flight. Your role will involve inspecting internally/externally manufactured material in accordance with applicable drawings, specifications, work orders and/or purchase orders to ensure conformity and product quality meets Safe Flight standards. You will report to the Quality Manager. Duties/Responsibilities: Work from drawings, specifications, purchase orders, and general instructions to verify a variety of vendor supplied components and subassemblies against required quality standards. Inspect components for conformance to ensure product conformity to the most recent revision. Ability to read and understand wiring diagrams, schematics, engineering drawings and parts lists. Electronics testing of components and assemblies may be required. Reviews paperwork accompanying inspected items for appropriateness and completeness. Perform in-house calibrations and coordinate the dispatch of equipment requiring calibration. Performs other related duties as assigned. Required Skills/Abilities: Previous experience with printed circuit board assemblies, electrical and electro-mechanical assembly components. Experience in lot traceability and reviewing certifications and process paperwork. Strong knowledge of quality control procedures, inspection techniques, and measurement tools. Familiarity with quality standards and regulations relevant to the industry (e.g. ISO9001/AS9100, AS9102 FAI, J-STD-001, IPC-A-610 or other industry-specific standards). Proficient in using measurement and testing equipment, such as calipers, gauges, digital multi-meters, etc. Familiarity with visual inspection of wire harnesses, circuitry and electrical assemblies. Strong communication skills, both written and verbal. Ability to work collaboratively in cross-functional teams and adapt to changing priorities. Computer skills for data entry, report generation, and document management. Education and Experience: Associate degree or equivalent work experience; technical certifications or additional education in quality assurance or related fields is a plus. Other duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Equal Opportunities Employer Safe Flight provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. #hc242057

Job Description This Is How We Fly At JSX, we’re not just a lifestyle carrier – we’re a lifestyle employer. Here, entrepreneurship meets determination, and excellence is our standard. We believe that the journey is just as important as the destination, and every day, we strive to create a Joyful, Simple eXperience for our Customers. Join us, and find your runway to growth, innovation, and success. About the Role: As a Quick Upgrade Captain at JSX, you’ll be at the controls of one of the most innovative aviation experiences in the industry. Your mission is to operate our aircraft safely, efficiently, and in full compliance with all regulations, all while delivering exceptional service to every flight. With typical schedules averaging 3-5 legs per day over 14-16 days per month, we prioritize work-life balance and strive to return you to your home base every night. A Day in the Life: Pre-Flight Preparation Your day begins one hour prior to departure, giving you ample time to: • Review key flight details in Traxxall, including maintenance status, NOTAMs, fuel loads, weather conditions, and routing., • Collaborate with the Captain to discuss departure and arrival strategies, including diversion planning if needed., • Perform all required pre-flight checks, safety procedures, and flows to ensure the aircraft is clear. In-Flight Operations • Operating the aircraft in full compliance with FAA regulations, JSX SOPs, and industry safety standards., • Maintain real-time communication with Mission Control (Dispatch), Ground Operations, ATC, and your Flight Attendant., • Serve as the secondary voice to the Captain in decision-making, ready to act quickly and confidently in dynamic conditions. Post-Flight Duties • Assist with quick turn tasks, including light cabin tidying: clean tray tables, cross seatbelts, collect trash, and support the Flight Attendant as needed to ensure an on-time departure., • Log any maintenance in Traxxall and communicate critical updates to Mission Control Additional responsibilities include: • Participating in recurrent training and performance evaluations to maintain proficiency and grow in your career., • Step in to assist with baggage handling or other duties at smaller airports where ground support is limited., • Consistently represent JSX with the highest standards of safety, professionalism, and Customer, both in and out of the flight deck. Why You’ll Love This Role: • You’re More Than a Number: At JSX, you’re a valued Crewmember, not just a call sign., • No Two Days Are the Same: Every flight brings unique challenges and opportunities to shine., • Create Memorable Moments: You’re part of the entire Customer journey, delivering hospitality in the air and on the ground., • Path to Captain: When operational need arises and/or a spot opens, you will be the first to upgrade and jump into the left seat. What Makes a Successful Quick Upgrade Captain? We’re looking for someone who is: • Adaptable: You thrive in fast-paced, dynamic environments, adjusting quickly to changing priorities, weather, and operational needs., • Detail-Oriented: Nothing gets past you, from preflight checks to final shutdown., • Critical Thinker: You can quickly assess situations and make sound, safety-first decisions., • Customer-Centric: You take pride in making every passenger feel welcomed and cared for., • Communicative: You share information clearly and keep everyone in the loop, from your Captain, Flight Attendant, Grounds Crew, Maintenance, Mission Control, and Customers., • Proactive: You anticipate needs, take initiative, and solve problems after they arise., • Safety-Focused: You instinctively prioritize safety in every action and hold yourself and others accountable to the highest safety standards., • Entrepreneurial Spirit: You bring energy, ownership, and creativity to your role, always looking for ways to improve processes and elevate the Customer experience. Required Experience: • High School Diploma/GED, • Minimum 2500 fixed-wing total flight hours, • Minimum 500 multi-engine hours, • Minimum 500 turbine hours, • Minimum 100 hours within the last 12 months Preferred Experience: • 3000+ total time, • 1000+ multi-engine hours, • Embraer 135/145 experience Skill, Licenses, & Certifications: • Valid FAA Pilot Certificate appropriate to the aircraft and operating position held., • Current and valid Driver’s license and Passport, • Current and valid FAA First Class Medical Certificate, • Current and valid ATP or Commercial Multi-Engine Certificate, • Current and valid FCC Radio Operator’s Permit Pay & Perks: Compensation throughout training is $150.00 (+per diem) daily, which goes up to $259.00 (+ per diem) daily on the line. You are guaranteed a 14-day minimum per month salary. For additional pay, you are eligible for Productivity Pay and quarterly bonuses. • Health Benefits: New Crewmember's become eligible for coverage on the 1st of the month following the start date, with medical plans beginning at just $110/month. 100% employer-paid dental & vision, plus up to $2,100 annually for HSA contribution. Short-term and long-term disability coverage at no cost., • Travel Benefits: Enjoy free non-revenue standby travel on JSX, plus deeply discounted standby travel on other major domestic & international airlines for you and your qualifying immediate family., • 401(k) match: 50% of your first 8%, • Generous PTO: Take time to recharge with our flexible PTO plan., • Pilot Perks: Uniform allowance provided to new hires with annual replenishment, along with an EFB (iPad) issued at no cost. Company paid KCM badge and Jumpseat/CASS participant. Incentive pay for being called to fly on all days past a 14-16 day average and additional hours over an 8-hour average duty day. Additional Information: May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (emergencies, changes in workload, rush jobs, technical developments, etc). JSX seeks to provide equality of opportunity in all aspects of employment, as well as to ensure that all personnel activities, such as the recruitment, selection, training, compensation, benefits, discipline, promotion, transfer, layoff and termination processes remain free of illegal discrimination and harassment based upon race, color, religion, sex, sexual orientation, gender identity, and national origin. Ready to soar with us? Join JSX, where every day is a chance to be part of something eXtraordinary!

Job Description Assembly Supervisor About Us: Safe Flight, a leader in aviation safety and flight performance systems, was founded in 1946. The company pioneered the development of Stall Warning and Angle of Attack, Automatic Throttle Systems, Wind Shear Warning, and many other innovations in aircraft instrumentation, flight performance, and control systems for fixed and rotary winged aircraft. With product installed on over two-thirds of the world’s aircraft, Safe Flight counts among its customers the majority of the world’s aircraft manufacturers, more than 50 airlines, hundreds of operators of corporate jet aircraft and U.S. and International Armed Services. Safe Flight’s benefits: include employer-funded health care, on-site lunch program, 401K contribution, Wellness and Education Reimbursement, paid-time off and sick time, and various other programs. Full-Time: Office hours from 7:45 am to 4: 15 p.m. Onsite Monday through Friday Salary range: $60, 000 to $80,000 per year (salary commensurate with experience) Key Responsibilities Oversee the daily operations of a production facility, ensuring that goods are produced efficiently, safely, on time, and within quality standards. They are responsible for coordinating production schedules, managing staff, maintaining equipment, and implementing process improvements. • Production Oversight: Planning, scheduling, and directing daily production activities to meet targets., • Safety & Compliance: Ensuring adherence to company policies, and quality standards., • Staff Management: Hiring, training, supervising, and motivating production floor staff., • Process Improvement: Implementing Lean manufacturing, Six Sigma, 5S, and other continuous improvement methodologies to increase efficiency and reduce costs., • Equipment Maintenance: Coordinating with maintenance teams to ensure machinery is operating correctly and performing preventive maintenance., • Troubleshooting: Analyzing and resolving production, machinery, or quality issues. Qualifications and Skills • Education: Bachelor’s degree in engineering, manufacturing, business, or a related field is often required., • Experience: Typically, 5-10 years of experience in manufacturing, with a strong preference for prior management or supervisory roles., • Technical Knowledge: Familiarity with specific manufacturing processes, machinery, and blueprints., • Systems Knowledge: Proficiency in ERP (Enterprise Resource Planning) systems and Microsoft Office, particularly Excel., • Soft Skills: Strong leadership, communication, problem-solving, and organizational skills. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Equal Opportunities Employer Safe Flight provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. #hc233363

Job DescriptionDescription: FoxTrot Aviation Services is seeking a consistently hard working Aviation Supervisor who is committed to reliable quality service, customer relationships, and building a rock steady team. Based at the Teterboro Airport (TEB) and Westchester County Airport (HPN) This position will require an open and flexible work schedule 7 days a week that includes weekends and some holidays. The Aviation Supervisor (AS) is a key leadership position responsible for ensuring the highest standards of safety, quality, and operational efficiency within the aircraft detailing team. The AS will work closely with and assist the Operations Manager in overseeing daily operations, managing team performance, enforcing safety protocols, and ensuring the quality of service provided to clients. This role requires a proactive, organized, and adaptable leader with strong communication skills and a deep understanding of safety and operational procedures. The Aviation Supervisor will also handle scheduling, team training, and ensure accurate safety compliance documentation. Key Responsibilities: 1. Safety Management: • Demonstrate comprehensive knowledge of safety protocols, particularly Policy 700, and enforce these policies across the team., • Identify and communicate any hazardous behaviors or unsafe conditions on the jobsite., • Develop and implement strategies to improve safety standards on all worksites., • Complete and submit safety documentation including HIT Forms, Safety Stand Downs, and Hazardous Attitude Reports., • Assist in incident investigations, ensuring proper documentation, communication, and follow-through., • Collaborate with the Training/Safety Department to ensure up-to-date compliance with safety protocols and maintain accurate training records. 1. Scheduling and Staffing: • Build and manage work schedules to optimize operational flow and meet service needs., • Report scheduling requests or concerns to the Operations Manager and adapt to changes in a positive manner., • In the absence of the Operations Manager, assume full responsibility for scheduling and operational coordination., • Document and report attendance, call-offs, or absences and communicate this information to the OM., • Participate in the hiring process, including interviewing candidates and ensuring timely onboarding, background checks, and drug testing., • Assess team member skills, provide feedback, and communicate personnel needs and performance issues to the OM., • Ensure staffing levels align with job budgets, and address any attendance or personnel issues with the OM. 1. Quality Control & Certification: • Maintain Level 4 Certification and ensure annual recertification., • Conduct detailed inspections of aircraft to identify quality imperfections and ensure all work meets company standards., • Perform final quality control (QC) checks on aircraft and resolve issues such as missed bugs, bright work, and interior cleanliness., • Track and complete Critical to Quality (CTQ) audits and quality assessments. 1. Team Training and Development: • Lead training sessions for team members on aircraft detailing procedures, safety compliance, and operational standards., • Create and present training materials, including slide decks, to ensure all new hires are equipped with the necessary knowledge., • Collaborate with the Training/Safety Department to ensure consistent safety compliance and track training progress. 1. Operational Support: • Ensure the GO-Bag, carts, and van stock meet the minimum operational needs by reviewing reorder forms with the OM., • Identify and rectify shortages or inadequacies in equipment or chemical supplies., • Oversee that all vehicles are properly fueled, maintained, and ready for dispatch. Conduct regular vehicle inspections and report discrepancies or damages to the OM., • Ensure vehicles and equipment are operated in compliance with airport permit regulations, especially when working within the Aircraft Operations Area (AOA). 1. Customer and Team Communication: • Communicate effectively and professionally with co-workers, supervisors, administrators, and upper management., • Respond to customer requests and inquiries in a professional manner, ensuring client satisfaction., • Clearly communicate operational pain points and improvements to the OM and management team., • Manage and close out transient email threads and coordinate job tasks in the absence of the OM., • Address any personnel issues promptly and communicate with HR as needed. 1. Ad-hoc Tasks and Operations Management: • Be willing to take on ad-hoc tasks or projects, whether locally or non-locally, as required by the operation., • Serve as a backup for the Operations Manager, ensuring continuity of operations and filling any operational gaps., • Identify and suggest improvements to operational processes to increase efficiency and service quality., • Maintain a full understanding of the Operations Manual for the location and ensure adherence to all procedures. 1. Financial and Labor Metrics: • Track labor metrics and provide recommendations to improve operational efficiency and cost management., • Monitor and report on labor overages and staffing compliance with the budget., • Maintain awareness of +/- revenue goals and ensure operations align with P&L objectives. Qualifications: Experience: • Minimum of1-2 years of supervisory experience in aircraft detailing, aviation operations, or a related field., • Solid understanding of aircraft detailing procedures, safety standards, and quality control processes., • Experience with safety compliance, incident reporting, and safety documentation., • Strong leadership experience, including team management, scheduling, and personnel oversight. Certifications and Skills: • Knowledge of aviation safety regulations and incident reporting procedures., • Proficient in using scheduling and documentation software., • Strong problem-solving, organizational, and leadership skills., • Excellent written and verbal communication skills. Physical Requirements: • Ability to perform physically demanding tasks related to aircraft detailing, including lifting, bending, and working with cleaning chemicals., • Ability to work in varying weather conditions and environments., • Willingness to work flexible hours to meet the operational needs of the business., • Must have an acceptable attendance record and demonstrate reliability in fulfilling shifts., • Valid driver’s license and the ability to operate company vehicles as needed., • Non-Exempt, • Medical/Dental/Vision/Life Benefits available after a 60 day probation, • 401K with company match available with 1 year seniority, • PTO, • Job Type: Full-time, • Pay: $25.00 Per Hour The Culture FoxTrot is not a typical service company. We are a highly aggressive, tight knit, caring group of action oriented individuals. We are growing at 70%+ per year due to our excellent reputation and high standards. This job may not be right for someone with extensive outside commitments or side hustles. We need your full focus. We are fearless; our team is relentlessly building new, and robust systems. It is up to you to provide feedback on these systems. Don’t accept average, expect excellence from your leadership team. The Rewards Apply if you would like to contribute to building an organization that is large, great, and lasting. In the process, open your world up to extensive travel, learning opportunities, and career growth potential. Start building your career today at FoxTrot Aviation. Requirements:

Job Description Business Unit: HPN – Airside Operations Reports To: Airport Operations Supervisor/Airside Operations Manager FLSA Classification: Non‑Exempt Job Category: Regular, Full‑Time Primary Work Location: On‑Site, Westchester County Airport Country: USA Job Summary Under general supervision, this position supports the safe, secure, and efficient operation of the airport in accordance with all applicable regulatory requirements, including but not limited to the Federal Aviation Administration (FAA) and Transportation Security Administration (TSA). The role performs a wide range of airfield operations, including compliance inspections related to safety, security, and the environment. In addition, Airport Operations Coordinator performs weather reporting, emergency response, snow/ice removal operations, and provides direct support to aircraft operations and airport users. The position works rotating shifts, operates specialized equipment and emergency response vehicles, maintains required operational records, and responds to routine and emergency situations. This position reports directly to the Airport Operations Supervisor. Candidates must possess a degree in aviation or a related field, or equivalent experience in airport or airline operations, and be able to meet all training and certification requirements. The position requires the ability to obtain and maintain required licenses and certifications, including but not limited to a valid CDL Class B, FAA/NWS ASOS weather observation authority, and security credentials, as well as the ability to perform physically demanding work, operate specialized vehicles and equipment, and work rotating shifts, including nights, weekends, and holidays. Essential Job Functions • Maintain and operate the Airports Unicom Base Station, issue aircraft advisories, and render assistance in the directing and parking of commercial services and private aircraft. Update and maintain all required pertinent records on the computer-based Airport Operations Daily Log and assist in providing professional services, • File Notices to Airmen (NOTAMs) and update airfield conditions on computer-based programs, • Drive and operate specialized aircraft emergency response fire fighting vehicles and respond to all aircraft alerts, • Provide proper augmentation to the Airports Automated Surface Observing System (ASOS), post hourly METAR aviation weather reports and issue special weather observations when significant weather conditions exist, • During periods of snow and ice removal, under the direction of a supervisor, drive and operate all major airport snow removal equipment. Perform tasks at the Snow Command Desk, file Notices to Airmen (NOTAMs) and update airfield conditions on computer-based programs, • Perform airport security inspections and video monitoring under requirements of TSR1542. Respond to any unauthorized entry of persons or vehicles on the ramps and AOA, • Responsible for maintaining the airport safety under FAR Part 139 and reporting any discrepancies to the Airport Operations Supervisor, • Maintain equipment and working environment in clean, neat and orderly condition Employee uniform shall be maintained and properly worn while on duty, • Perform other tasks as assigned by the Airport Operations Supervisor, • Maintain attendance and performance at required training functions, • Support functions of the Airport’s Certification Manual (ACM) and Security Program (ASP). Competencies • Maintain strict adherence to FAA Part 139, TSA security requirements, and airport operating procedures., • Demonstrate constant situational awareness in an active airfield environment, identifying and reporting safety discrepancies., • Communicate clearly and professionally with pilots, supervisors, emergency responders, and airport stakeholders., • Operate specialized airport vehicles, emergency response, and snow removal equipment safely and effectively., • Respond calmly and decisively to aircraft alerts, emergencies, and rapidly changing operational conditions., • Accurately observe, document, and report weather conditions, including METAR observations and special reports., • Perform security inspections and monitor access to AOA and ramp areas, responding appropriately to unauthorized activity., • Maintain accurate operational records, logs, and NOTAMs using required computer-based systems., • Function effectively during adverse weather, emergency events, rotating shifts, and high-pressure situations., • Demonstrate reliability, accountability, and professionalism, including proper uniform standards and attendance., • Participate fully in required training, drills, and certification programs, maintaining operational readiness., • Work collaboratively in a high-coordination environment to support safe and efficient airport operations. Required Skills & Qualifications Education & Experience • Minimum high school diploma or GED required., • Four-year degree in Aviation preferred, • Prior experience in airport and/or airline operations preferred. Technical Skills / Expertise • Acquire all licenses or certificates required by regulatory agencies., • Meet the required training criteria under FAR, Part 139., • Possession of a valid commercial driver’s license (CDL class B)., • Possession of the National Weather Service “Certificate of Authority to take METAR Weather Observations”., • Pass Company test pertaining to Federal Aviation Administration Federal Aviation Regulation Part 139., • Pass bi-annual fire brigade physical., • Maintain adherence to the Airport Environmental Management System (“AEMS”)., • Meet or exceed the required training criteria under the Airport Environmental Management System., • Meet or exceed required security training and performance criteria as mandated in the Federal Approved Airport Security Plan., • Must obtain a NYS Department of State, Security Guard License Other Requirements • Must be at least 18 years of age., • Possess and maintain a valid driver’s US license., • Work flexible schedules: evenings, nights, weekends, holidays, overtime., • Able to work in extreme weather conditions., • Maintain required airport/airline clearances and certifications., • Demonstrate the ability to perform under pressure, work in extreme weather conditions, and have physical stamina for lifting and working long shifts, • Noise and jet blast awareness, • Must be able to work effectively as part of a team., • Ability to read, write, and communicate effectively in English language. Preferred Skills • Experience in aviation, transportation, logistics, or airport operations., • Strong communication and customer service skills., • Ability to follow detailed instructions and safety checklists. Work Authorization & Travel Requirements • Must be authorized to work in the United States without sponsorship., • Must comply with airport credentialing requirements to work in secure areas., • Travel is generally limited to local airport access; however, offsite training may be required at least once annually. Work Environment, Physical Demands & Requirements • Regularly required to stand, walk, climb, balance, stoop, kneel, crouch, and reach while performing operational and inspection duties., • Must be able to lift, push, pull, and carry equipment and materials weighing up to and exceeding 75 pounds., • Requires sufficient visual acuity, depth perception, peripheral vision, and hearing to safely operate vehicles, observe airfield conditions, and respond to emergencies., • Ability to work for extended periods outdoors in extreme temperatures, inclement weather, and high-noise environments., • Ability to safely operate specialized airport vehicles, emergency response apparatus, and snow removal equipment., • Must demonstrate reliability, sound judgment, and the ability to remain calm and effective in high-pressure or emergency situations. Applies to all team members, including those represented by a labor union or bargaining unit. If any part conflicts with a collective bargaining agreement (CBA), the CBA will take precedence. The Company complies with the Americans with Disabilities Act (ADA), as amended by the ADA Amendments Act, and all applicable state or local law. Consistent with those requirements, the Company. will reasonably accommodate qualified individuals with a disability if such accommodation would allow the individual to perform the essential functions of the job, unless doing so would create an undue hardship. The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Equal Employment Opportunity We are an equal opportunity employer and are committed to providing a workplace free from discrimination. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, veteran status, or any other characteristic protected under applicable federal, state, or local law. We provide reasonable accommodation to qualified individuals with disabilities and encourage applications from all qualified candidates. Compensation and Benefits Overview Benefits may include: • Medical, Dental, and Vision Plans, • Health Savings and Flexible Spending Accounts, • Disability Insurance, • Life and AD &D Insurance Options, • Supplemental Insurance Plans, • 401(k) Retirement Savings Plan, • Paid Vacation, Sick Time, and Company Holidays, • Training and Career Development Opportunities

Aviation safety inspectors work to ensure the safety of aircrafts, including its parts, processes, and its aircraft operators. The heart of this role is to promote aviation safety, with all tasks centered around safety.

Part-Time Baggage Runner - HPN Airport Job Category: Airport Operations Posted: May 8, 2026 Part-Time On-site Rate: $17 USD per hour Location: West Harrison, NY 10604, USA Job Details LIFT, LOAD, AND LAUNCH YOUR FUTURE — BECOME A BAGGAGE RUNNER! Interested in working in aviation? Are you looking for a job with stability and growth opportunities? If you are looking for a career with growth potential and work well in a fast-paced, team-oriented environment, we want to speak to you! WHY WORK FOR PRIMEFLIGHT? • Enjoy benefits like 401(k) with matching, health, dental, vision, and life insurance, paid time off, growth opportunities, and more (*Benefits may vary based on eligibility), • We are committed to being a leading provider of commercial services within the aviation industry, • Our teams focus on maintaining a positive working environment and treating all team members with respect, • With more than 200 locations across the world, we offer opportunities for career progression SUMMARY OVERVIEW The Baggage Runner is responsible for the safe, efficient, and timely transportation of passenger luggage throughout the airport environment. This position ensures baggage is properly routed between terminals, aircraft, and baggage claim areas while maintaining strict adherence to safety, security, and operational standards. The role requires attention to detail, physical stamina, and the ability to perform effectively in a fast-paced, deadline-driven environment. RESPONSIBILITIES • Transport baggage safely and efficiently between aircraft, terminals, and baggage handling areas, • Handle passenger luggage with care to prevent damage, • Assist in loading and unloading baggage from aircraft in accordance with airline procedures, • Operate baggage carts, tugs, and transport equipment safely and effectively, • Verify baggage tags and ensure correct routing to appropriate flights, • Assist in sorting and organizing baggage in the baggage claim and processing areas, • Respond promptly and professionally to baggage-related passenger inquiries, • Coordinate with baggage handling teams to ensure efficient workflow and on-time departures, • Report baggage discrepancies, damage, or security concerns immediately, • Adhere to all airport safety, security, and operational protocols, • Maintain cleanliness and organization in baggage handling areas, • Assist in baggage scanning and security screening procedures as required, • Support tracing and recovery efforts for lost, delayed, or misrouted baggage, • Work in various weather conditions and adjust to operational schedule changes, • Collaborate effectively with airline personnel and airport staff to ensure timely baggage delivery, • Support and promote the company's Safety Management System (SMS) initiatives, • Report safety hazards, incidents, and near misses in accordance with SMS procedures, • Exceed PrimeFlight customer service and safety standards, • Perform any additional duties as assigned by management QUALIFICATIONS • 18 years of age or older, • Must be legally authorized to work in the country of employment., • Must hold a valid driver's license., • Ability to read, write, speak, and understand the English language, • Minimum of 1 year of customer service experience preferred, • Ability to access and interpret information in print and electronically, including use of tablets, computers, and mobile devices, • Ability to communicate effectively with colleagues and customers in person and electronically, • Eligibility to acquire needed credentials and clearances (FAA, RAIC, TSA, Port Authority, U.S. Customs and U.S. Postal- as applicable)., • Ability to work flexible shifts including nights, weekends, and holidays in a 24/7 operational environment, • To perform this job successfully, an individual must be able to perform each essential requirement satisfactorily. The requirements listed above are representative of the work environment, knowledge, skill, and/or ability. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential requirements. PHYSICAL ACTIVITY / WORKING CONDITIONS MAY INCLUDE • Ability to lift up to 70 pounds repeatedly, • Prolonged standing and walking in indoor and outdoor environments, • Ability to push, pull, bend, stretch, squat, kneel, crouch, and crawl, including in confined spaces, • Exposure to moderate to high noise levels, • Exposure to outdoor weather elements, • Ability to hear and respond to spoken voice and audible alarms, • Tasks involving repetitive arm, wrist, hand, and finger movements, • Vision requirements include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus The pay rate listed on this post is what the company reasonably expects to pay for this position. However, individual compensation may vary based on qualifications, skills, competencies, education, and experience. PrimeFlight Aviation Services, Inc. is proud to be an equal-opportunity employer. All applicants and employees are considered and evaluated for positions at PrimeFlight Aviation Services, Inc. without regard to race, ethnicity, religion, color, sex, gender, gender identity or expression, sexual orientation, national origin, ancestry, uniform service member and veteran status, marital status, pregnancy, age, protected medical condition, genetic information, disability, or any other protected status in accordance with all applicable federal, state/province, and local laws. By providing your mobile number and opting in, you consent to receive SMS messages from PrimeFlight related solely to recruiting and employment opportunities, such as job postings, application status updates, or interview scheduling. Consent is voluntary and not a condition of applying for employment. Message frequency may vary. Standard message and data rates may apply. Reply STOP to opt out or HELP for assistance. Carriers are not liable for delayed or undelivered messages. Numbers will be used in accordance with this Privacy Policy and not shared for marketing without consent. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Tradewind Pilatus PC-12 Pilots are responsible for safe and efficient flight operations as part of a formal two-pilot crew. FAA Commercial Pilot Certificate with Airplane Single-Engine Land (ASEL). Tradewind Pilots are aviation professionals who maintain the highest standards of safety and customer

Job DescriptionWhy You’ll Love This Line Service Technician JobDid you ever want to work in aviation but didn’t know how to break into the industry? Would you like working in a fast-paced environment, often outdoors, around some of the most incredible professionals in aviation? If so, this Line Service Technician position with Atlantic Aviation at HPN in White Plains, NY may be perfect for you! Pay: $21 / hour Schedule: Requires availability for any/all shifts including overtime, weekends, holidays, and on-call duty In this position, you will provide aviation ground support services to customers in a positive and professional manner. You will perform in all facets of the ground handling operation including but not limited to aircraft fueling/defueling, baggage/cargo handling, aircraft towing, using marshalling signals for aircraft parking, providing lavatory/potable water service, and using other various ground support equipment to help support the needs of customer and their aircraft. Build a career in aviation you are excited about and apply for the Line Service Technician job today!ResponsibilitiesLine Service Technician Responsibilities • Deliver and receive fuel to and from company tanks, vendor trucks, and aircraft., • Operate all company ground support equipment as requested or required, including lavatory and water service carts, ground power unit, deice truck, etc., • Perform ground marshalling using standard aviation signals., • Perform customer service activities such as helping customers with aircraft scheduling and fueling., • Assist with aircraft turning, loading, and unloading., • Ensure all buildings and grounds are safe, clean, and organized., • Conduct or assists with daily/weekly onsite safety inspections and audits of equipment and facility operations., • Occasional travel may be required to support another Atlantic location., • You may be occasionally assigned to another Atlantic location based on geographical proximity as business needs require. Required SkillsLine Service Technician Qualifications, • High school diploma or GED certificate, • 18 years of age, • A valid state driver’s license, • Be comfortable and physically able to work in an environment with frequent walking, stretching, bending, sitting, stooping, reaching, grasping, and climbing., • Be physically able to perform heavy lifting on a regular basis up to 50 lbs.We maintain a drug-free workplace and perform pre-employment substance testing.#airport #lineservice #White Plains

Job DescriptionDescription: FoxTrot Aviation Services is seeking a consistently hard working Operations Manager who is committed to reliable quality service, customer relationships, and building a rock steady team. Based at the Teterboro Airport (TEB), Westchester County Airport (HPN) and John F Kennedy International Airport (JFK) This position will require an open and flexible work schedule 7 days a week that includes weekends and some holidays. The Operations Manager (OM) is a critical role responsible for maintaining a culture of safety and operational excellence at their jobsite. The OM is tasked with overseeing all safety measures, scheduling, staffing, supply management, documentation, quality control, training, and client communication. The OM must enforce safety policies, manage daily operations efficiently, and ensure high-quality service delivery. This role requires frequent interaction with the Safety Department, accurate documentation, proactive problem-solving, and a strong commitment to continuous improvement and team management. Key Responsibilities: 1. Safety and Compliance: • Safety Culture: Prioritize and champion a safety culture daily, ensuring all team members adhere to internal and external safety expectations., • Safety Ambassador: Act as the ultimate safety ambassador onsite, maintaining constant contact with the Safety Department for guidance on safety concerns and issues., • Safety Reporting: Disseminate safety findings to the team weekly via the HIT Form and ensure compliance with safety policy 700., • Safety Evaluation: Stringently evaluate jobsite safety, report potential hazards, mitigation procedures, or incidents to the Safety Department., • Incident Management: Address safety issues proactively with a "better safe than sorry" attitude. 1. Scheduling and Attendance: • Weekly Schedule: Finalize and share the weekly schedule by 8 PM Sunday night. Forecast scheduling needs and make adjustments as required., • Attendance: Maintain an acceptable attendance record and ensure proper documentation of tardiness and absences for the crew. 1. Staffing and Performance Management: • Hiring Needs: Predict and communicate any hiring needs to the staffing team promptly. Assist in staffing interviews as requested., • Performance Reviews: Conduct quarterly performance reviews for team leads and ASs. Manage turnover by addressing staff issues and hosting monthly team meetings to gauge morale., • Team Meetings: Facilitate monthly team meetings to address morale and any issues. 1. Supply and Equipment Management: • Supply Management: Ensure the station is consistently stocked with necessary supplies, including proactive ordering from external sources if needed. Approve and submit locker reorder forms in a timely manner., • Inventory Audits: Perform monthly audits on equipment status and chemical stock. Organize and manage the supply locker for efficiency and safety., • Inventory Tracking: Update all inventory management tracking systems and associated checklists. 1. Documentation and Administration: • Form Accuracy: Audit and verify all forms, including badge trackers, disciplinary action forms, HIT Forms, and termination forms., • Payroll and Expenses: Submit payroll and expense reports on time and accurately. Approve or deny PTO requests for team members., • Financial Pulse: Meet finance compliance and complete the Financial Pulse Sheet. Document and address any issues with disciplinary actions and terminations., • Customer Information: Create new customers in QuickBooks and communicate with Accounts Payable/Receivable as needed. 1. Quality Control: • Quality Management: Master quality standards, teach and rectify quality complaints, and catch issues before clients do. Ensure all jobs are completed per company procedures., • Quality Audits: Conduct internal audits and ensure the location meets the composite quality score of 3.75. 1. Training and Development: • Training Plans: Provide thorough training to all team members and develop training plans for new hires, including coordinating with the Training Department for advanced sessions., • Recurrent Training: Proactively reach out to the Training Department for recurrent training sessions as needed. 1. Communication and Reporting: • Effective Communication: Maintain clear and effective communication with the PM, co-workers, supervisors, and clients regarding labor budgets, P&L, staffing, and safety., • Client Interaction: Communicate regularly with clients to share updates, manage time constraints, address workflow disruptions, and handle quality complaints., • Execute targeted upselling strategies by engaging directly with program managers and customers to identify service expansion opportunities and align solutions with operational needs, • Professionalism: Conduct professional correspondence via email and with personnel. Debrief using the "five W's." 1. Vehicle Management: • Vehicle Audits: Audit vehicles for safety, maintenance, and cleanliness. Ensure timely maintenance and communicate deficiencies to the PM., • Legal Compliance: Ensure vehicles meet legal compliance prior to travel and manage basic maintenance up to $350 without approval., • Accident Protocol: Be trained in accident protocol. 1. Operational Support: • Pop-Up Jobs: Assist with pop-up jobs and be willing to travel and stay overnight as needed for 5-7 days., • Operational Committees: Participate in operational committees (e.g., People’s Committee, Safety Committee) and demonstrate location solidarity by working with the team., • Sales Leads: Share new customer sale leads with the PM but have the autonomy to close on project sales., • P&L Updates: Regularly update and review the location’s P&L. Key Performance Indicators (KPI’s): • Success metric is 100% checklist compliance and no quality complaints, • Success metric is hitting revenue goals and receiving customer compliments through our feedback system, • Success metric is less than 35% annual full time turnover at the location Qualifications: • Proven knowledge of safety regulations and operational best practices., • Proven experience in a managerial role with a focus on safety, scheduling, staffing, and quality control., • Strong leadership, communication, and problem-solving skills., • Proficiency in documentation, payroll management, and inventory tracking., • Ability to travel as needed and work flexible hours. Education and Experience: • Bachelor’s degree in Business Administration, Management, Safety, or related field preferred., • 1-3 years management or supervisory experience preferred, be willing to perform very physical work, and have open schedule availability., • Relevant certifications in safety and management are a plus. Working Conditions: • Regular travel and occasional overnight stays are required., • Ability to work flexible hours and be on-call for urgent issues., • Lifting up to 50lbs, bending, and twisting, • Working with a high level of detail 8 to 10 hours per day, • Medically cleared to operate heavy machinery and perform all physical work, • The candidate needs to be excellent at communication and available by a cell phone with a consistent number., • The candidate must have a valid driver's license and reliable Compensation • Non-Exempt, • Medical/Dental/Vision/Life Benefits available after a 60 day probation, • 401K with company match available with 1 year seniority, • PTO, • Job Type: Full-time, • Pay: $70,720 yearly The Culture FoxTrot is not a typical service company. We are a highly aggressive, tight knit, caring group of action oriented individuals. We are growing at 70%+ per year due to our excellent reputation and high standards. This job may not be right for someone with extensive outside commitments or side hustles. We need your full focus. We are fearless; our team is relentlessly building new, and robust systems. It is up to you to provide feedback on these systems. Don’t accept average, expect excellence from your leadership team. The Rewards Apply if you would like to contribute to building an organization that is large, great, and lasting. In the process, open your world up to extensive travel, learning opportunities, and career growth potential. Start building your career today at FoxTrot Aviation. Requirements:

Job Description This Is How We Fly At JSX, we’re not just a lifestyle carrier – we’re a lifestyle employer. Here, entrepreneurship meets determination, and excellence is our standard. We believe that the journey is just as important as the destination, and every day, we strive to create a Joyful, Simple eXperience for our Customers. Join us, and find your runway to growth, innovation, and success. About the Role: As a Quick Upgrade Captain at JSX, you’ll be at the controls of one of the most innovative aviation experiences in the industry. Your mission is to operate our aircraft safely, efficiently, and in full compliance with all regulations, all while delivering exceptional service to every flight. With typical schedules averaging 3-5 legs per day over 14-16 days per month, we prioritize work-life balance and strive to return you to your home base every night. A Day in the Life: Pre-Flight Preparation Your day begins one hour prior to departure, giving you ample time to: • Review key flight details in Traxxall, including maintenance status, NOTAMs, fuel loads, weather conditions, and routing., • Collaborate with the Captain to discuss departure and arrival strategies, including diversion planning if needed., • Perform all required pre-flight checks, safety procedures, and flows to ensure the aircraft is clear. In-Flight Operations • Operating the aircraft in full compliance with FAA regulations, JSX SOPs, and industry safety standards., • Maintain real-time communication with Mission Control (Dispatch), Ground Operations, ATC, and your Flight Attendant., • Serve as the secondary voice to the Captain in decision-making, ready to act quickly and confidently in dynamic conditions. Post-Flight Duties • Assist with quick turn tasks, including light cabin tidying: clean tray tables, cross seatbelts, collect trash, and support the Flight Attendant as needed to ensure an on-time departure., • Log any maintenance in Traxxall and communicate critical updates to Mission Control Additional responsibilities include: • Participating in recurrent training and performance evaluations to maintain proficiency and grow in your career., • Step in to assist with baggage handling or other duties at smaller airports where ground support is limited., • Consistently represent JSX with the highest standards of safety, professionalism, and Customer, both in and out of the flight deck. Why You’ll Love This Role: • You’re More Than a Number: At JSX, you’re a valued Crewmember, not just a call sign., • No Two Days Are the Same: Every flight brings unique challenges and opportunities to shine., • Create Memorable Moments: You’re part of the entire Customer journey, delivering hospitality in the air and on the ground., • Path to Captain: When operational need arises and/or a spot opens, you will be the first to upgrade and jump into the left seat. What Makes a Successful Quick Upgrade Captain? We’re looking for someone who is: • Adaptable: You thrive in fast-paced, dynamic environments, adjusting quickly to changing priorities, weather, and operational needs., • Detail-Oriented: Nothing gets past you, from preflight checks to final shutdown., • Critical Thinker: You can quickly assess situations and make sound, safety-first decisions., • Customer-Centric: You take pride in making every passenger feel welcomed and cared for., • Communicative: You share information clearly and keep everyone in the loop, from your Captain, Flight Attendant, Grounds Crew, Maintenance, Mission Control, and Customers., • Proactive: You anticipate needs, take initiative, and solve problems after they arise., • Safety-Focused: You instinctively prioritize safety in every action and hold yourself and others accountable to the highest safety standards., • Entrepreneurial Spirit: You bring energy, ownership, and creativity to your role, always looking for ways to improve processes and elevate the Customer experience. Required Experience: • High School Diploma/GED, • Minimum 2500 fixed-wing total flight hours, • Minimum 500 multi-engine hours, • Minimum 500 turbine hours, • Minimum 100 hours within the last 12 months, • No FAA violations/accidents/incidents/suspensions, • No significant training/check ride failures Preferred Experience: • 3000+ total time, • 1000+ multi-engine hours, • Embraer 135/145 experience Skill, Licenses, & Certifications: • Valid FAA Pilot Certificate appropriate to the aircraft and operating position held., • Current and valid Driver’s license and Passport, • Current and valid FAA First Class Medical Certificate, • Current and valid ATP or Commercial Multi-Engine Certificate, • Current and valid FCC Radio Operator’s Permit Pay & Perks: Compensation throughout training is $150.00 (+per diem) daily, which goes up to $259.00 (+ per diem) daily on the line. You are guaranteed a 14-day minimum per month salary. For additional pay, you are eligible for Productivity Pay and quarterly bonuses. • Health Benefits: New Crewmember's become eligible for coverage on the 1st of the month following the start date, with medical plans beginning at just $110/month. 100% employer-paid dental & vision, plus up to $2,100 annually for HSA contribution. Short-term and long-term disability coverage at no cost., • Travel Benefits: Enjoy free non-revenue standby travel on JSX, plus deeply discounted standby travel on other major domestic & international airlines for you and your qualifying immediate family., • 401(k) match: 50% of your first 8%, • Generous PTO: Take time to recharge with our flexible PTO plan., • Pilot Perks: Uniform allowance provided to new hires with annual replenishment, along with an EFB (iPad) issued at no cost. Company paid KCM badge and Jumpseat/CASS participant. Incentive pay for being called to fly on all days past a 14-16 day average and additional hours over an 8-hour average duty day. Additional Information: May perform other responsibilities as assigned. Responsibilities and duties may change when circumstances dictate (emergencies, changes in workload, rush jobs, technical developments, etc). JSX seeks to provide equality of opportunity in all aspects of employment, as well as to ensure that all personnel activities, such as the recruitment, selection, training, compensation, benefits, discipline, promotion, transfer, layoff and termination processes remain free of illegal discrimination and harassment based upon race, color, religion, sex, sexual orientation, gender identity, and national origin. Ready to soar with us? Join JSX, where every day is a chance to be part of something eXtraordinary!

Job DescriptionDescription: Foxtrot Aviation Services is looking for dedicated, energetic, quality and safety focused individuals to join our ever-growing family! Foxtrot provides members of the aviation industry with top-of-the-line aircraft detailing, line service and facility cleaning services. We service a wide variety of aircraft and facilities both large and small! This position is based out at the Teterboro Airport (TEB) and Westchester County Airport (HPN) our company is continually growing, and we need candidates who meet and exceed our expectations of becoming the nation’s leading aircraft detailing and facility support company! Overnight Scheduled 9-10pm start time, end time fluctuates on a nightly bases Job Description: • Perform interior and exterior detailing of private aircraft, including cleaning, polishing, and protecting surfaces to enhance their appearance., • Clean and sanitize aircraft interiors, including cabins, cockpits, lavatories, and galley areas, following industry-approved cleaning procedures., • Vacuum, shampoo, and spot-clean carpets and upholstery to maintain a fresh and appealing interior., • Polish and wax aircraft exteriors to enhance the shine and protect the surfaces from environmental elements., • Clean and polish windows, ensuring a streak-free and crystal-clear view for passengers., • Detail and clean aircraft components such as landing gear, wings, and engines, using appropriate cleaning products and techniques., • Conduct thorough inspections to identify and address any damages, stains, or imperfections in the aircraft's interior or exterior., • Collaborate with aircraft owners, operators, and maintenance personnel to understand specific detailing requirements and preferences., • Detail oriented, organized and ability to work independently. Job Title: Aircraft Detailer Employment Type: Full-Time Shifts are available! Pay: $20.00 per hour Benefits: Medical, Life, Dental, 401(k) with a generous company match available for Full time employees (our 401k program is available to both Part-Time and Full-Time employees), and PTO to qualifying Full-Time employees. Requirements: • Must be able to pass a 10-year background check and obtain airport badging., • Must be able to pass a drug test (this includes the recreational use of Marijuana), • Possess a valid driver’s license and have reliable transportation., • Capable of bending, twisting, lifting and using machinery such as buffers for extended periods of time., • Perform general manual labor., • Be comfortable working with heights., • Open availability and flexibility with scheduling., • Veterans must provide the form DD214 of discharge information if applicable. Qualifications: • We are looking for people who are dependable!, • We are looking for people who are energetic!, • We are looking for people who take pride in their work!, • We are looking for people who are quality focused!, • We are looking for people who embody our core values of accountability, GRIT, Safety, Client Focus and Solidarity! Why work at Foxtrot Aviation Services? Here at Foxtrot, we care just as much about the professional development of our employees as we do creating a welcoming environment. Foxtrot Aviation is an exciting, fast paced, and growing company! There are plenty of opportunities for performance-based pay raises with full compliance of company policies and performance reviews and personal professional development! At Foxtrot Aviation Services the SKY is the limit, jump start your career and APPLY TODAY! Requirements:

Product Testers are wanted to work from home nationwide in the US to fulfill upcoming contracts with national and international companies.We guarantee 15-25 hours per week with an hourly pay of between $25 / hr.There is no payment required in order to apply or to work as an In-Home Usage Tester.You

We're currently looking for individuals across the country to take part in remote paid market research, including online focus groups, product trials, and consumer studies.Earn up to $750 a week in your free time by providing feedback on everyday products and services.If you're comfortable sharing y

Securitas - - Responsibilities: Greet and assist residents, guests, and visitors in a courteous and professional manner; Monitor access to the property and ensure all security protocols are followed; Conduct patrols of the premises to maintain a safe and secure environment; Respond promptly to inci

GardaWorld - - Responsibilities: Provide concierge security and customer service while ensuring safety at White Plains location.

Northwell Health - - Responsibilities: Patrols and monitors buildings and grounds to protect life and property and to prevent fire, thefts, vandalism, illegal entry and enforce hospital policies; Enforces access control policy; secures doors, locks, etc.Controls and regulates pedestrian and vehicul

USI) - - Responsibilities: Patrol premises and monitor surveillance equipment; Investigate security breaches; Complete incident reports; Interview witnesses; Maintain compliance with legal requirements.

Allied Universal - - Responsibilities: Provide customer service to employees, visitors, and/or vendors by carrying out site-specific procedures, access-related protocols, and when appropriate, emergency response activities at a financial services location.Respond to incidents, unusual activity, and

MGM Resorts - - Responsibilities: Patrol and monitor property by foot, bicycle, or vehicle; Monitor and conduct access control in all areas of the property including fixed posts (Indoor & Outdoor); Provide excellent guest service to guests and employees; Assist in emergency situations by securing t

Metro One Security - 188 King Street - Responsibilities: Deliver exceptional customer service to clients and visitors.Monitor CCTV surveillance systems and complete daily activity reports.Observe, survey, and report on activities at your assigned post.Respond quickly and appropriately to critical in

Securitas - JobID: 167913 [Safety Officer / Law Enforcement] As a Security Officer at Securitas, you'll: Observe and report activities and incidents at an assigned client site; Make periodic patrols to check for irregularities and to inspect protection devices and fire control equipment; Preserve or

Westchester Country Club - JobID: 200-756928 [Safety Officer / Law Enforcement] As a Security Officer at Westchester Country Club, you'll: Provide a safe and secure environment for members, guests, and employees; Maintain a visible and physical presence while on duty so that all club activity can be

GardaWorld - - Responsibilities: Monitor security systems to detect suspicious activity; Document observed events and incidents and write detailed reports; Respond quickly to incidents or potential threats; Conduct regular patrols to ensure the safety of the premises; Control access to secure areas

Allied Universal - - Responsibilities: Provide customer service to tenants, visitors, and property staff by following site-specific procedures, access protocols, and emergency response activities when appropriate.Respond to incidents, disturbances, and critical situations in a calm, problem-solving

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Allied Universal - - Responsibilities: Provide customer service at the front desk by screening visitors, managing access procedures, and answering questions in a professional manner; Monitor lobby and reception activity, verify identification and credentials, issue visitor badges or access permissi

Securitas - JobID: 167914 [Safety Guard / Security] As a Corporate Security at Securitas, you'll: Help maintain a safe and secure environment for the clients by actively monitoring the premises, including patrolling a variety of locations; Preserve order while enforcing regulations and directives fo

Allied Universal - - Responsibilities: Provide customer service to students, faculty, staff, and visitors by carrying out security-related procedures, location-specific policies, and/or emergency response activities when appropriate; Respond to incidents, disturbances, and critical situations in a

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese

Allied Universal - - Responsibilities: Provide customer service to students, faculty, staff, and visitors by carrying out security-related procedures, location-specific policies, and/or emergency response activities as appropriate; Respond to incidents, policy concerns, and critical situations in a

Seeking participants for Focus Group and market research studies.Work part-time from home and earn up to $750 per week.Register to see if you are eligible.Customer service representative agent experience not required.Remote Work From Home Customer Service Representative Agent - Part Time Market Rese