Concrete inspector jobs in Los Angeles, CaliforniaCreate job alerts

Job Description D'Leon Consulting Engineers is seeking a Construction in Los Angeles, CA. Responsibilities • Conduct comprehensive daily inspections across building and terminal construction projects, ensuring compliance with applicable codes and project specifications, review and interpret construction documents including blueprints and shop drawings, submittals, RFIs, and change orders., • Demonstrates strong proficiency in preparing comprehensive daily inspection reports that clearly document the WHO, WHAT, WHEN, WHERE, and HOW of all observed construction activities, ensuring accuracy, clarity, and accountability in tracking progress and identifying issues, deficiencies, or safety concerns in a timely manner., • Verify contractor compliance with local jurisdiction’s requirements, building codes and LAWA-specific proprietary standards., • Support special inspections and testing activities, coordinating with engineers, contractors, and third-party agencies as needed., • May be tasked to Track and document time-and-material work, field changes, and job quantities, • May be tasked to Assist in validating contractor progress payment requests based on an approved schedule of values. Perform inspections related to building construction including, but not limited to: • Clearing, grubbing & demolition of building structures., • Excavations, trenching & shoring., • Grade & elevation survey., • Structural Backfill & compaction for underground utilities., • Structural & Nonstructural concrete work., • Formwork, Footings & micro piles., • Sewer & Storm drain inspection., • Metal stud framing drywall installation & interior finishes., • Door & hardware with its components., • T bar ceilings, hard lids & other fire rated components Qualifications • Candidates must possess a minimum of five years of experience performing inspection, • Training in the use of fall protection equipment and harness with lanyard., • Confined space awareness certification., • Cal OSHA 30 hr. training and certificate., • Knowledge of Project Management Information Software used for inspection/document control (i.e., Microsoft Office, Outlook, Xcel, Word, PM Web, Adobe Pro, Bluebeam, etc.)., • Computer proficiency to review and utilize electronic equipment for contract documents efficiently, including change orders, submittals, RFIs, and other inspection documents, with minimal supervision, • The ability to write clear and concise documents depicting daily progress of the work may be assigned to a program where the inspector prepares monthly progress payment request, tracks various changes, verifies time and material work, measure, and documents job quantities. D’Leon Consulting Engineers is an equal opportunity employer committed to fostering an inclusive and respectful workplace. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status.

Job Description Inspector A Payrate: 25.00-29.00Schedule: 2nd shift 2:00pm to 10:30pm plus overtime when neededType: TemporaryOpenings: 5 Summary- This occupation requires inspecting all types of assemblies, sub-assemblies, final assemblies, and installations of machine parts, forgings, stampings, sheet metal forming for proper material, quality, machining dimensions and functional usability.Essential Duties and Responsibilities:Under general supervision, must be able to perform a variety of job duties including, but not limited to: • Makes inspection layout and first article inspection on machined parts, forgings, stampings, and sheet metal forms for use as reference guides to determine conformance to proper dimensions., • Inspects all types of assemblies, sub-assemblies, final assemblies and installations., • Records all inspection data and fills out all acceptance test procedures., • Re-inspects all rework to meet requirements., • Makes progressive and final inspection of components involving numerous precision tolerances dimension and angles that must be inspected by precision measuring instruments where no inspection jigs and/ or fixtures are available., • Stamps or otherwise approves acceptable parts and prepares paperwork as required., • Orders rejections and rework., • Makes out rejection tags, inspection rework sheets, and properly records all data to quality control procedure., • Informs supervisor of all rejections., • Sets up and operates precision measuring instruments and gauges and all general inspection of equipment., • Assists and instructs lower rated personnel in all phases of quality control operations., • Performs re-inspection or other duties where work operations are essentially the same or of a less difficult nature., • Follow all Senior policies and procedure., • Other duties as assigned.In addition to the above, Inspectors are to maintain an organized, clean and safe work area using safety standards and expectations while adhering to all quality practices. Senior is an Equal Opportunity Employer. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.Education and/or Experience:, • High School Diploma or General Education Degree;, • 3-5 years of related experience and/ or training; or equivalent combination of education and experience.Required Skills:, • Language: Ability to read and comprehend simple instructions, short correspondence, and memos., • Reasoning Ability: Ability to apply a general understanding to carry out detailed, written and oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations., • Mathematical Ability: Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to use shop mathematics., • Other Abilities: Must be able to read and interpret blueprints. Must be able to apply a complete knowledge of inspection theory and practice. Must determine the acceptability of assemblies and parts. Must be able to use various precision measuring instruments to maintain quality control standards. Must be able to use tact and diplomacy with customer and government quality control representatives.Tools used:, • Welding inspection checking fixtures, micrometers, scales, surface plates and tables, inspection stamps.Materials used:, • Ferrous and non- ferrous metals and their alloys in the form of sheet tubular stock, machined and formed parts, welded parts and assemblies.ITAR Compliance:, • Access to our facility and therefore employment is restricted under the international Traffic in Arms Regulations (ITAR) and/ or Export Administration Regulations (EAR) to U.S. citizens, lawful permanent residents of the United States and properly licensed foreign persons.

Job Description Location: SoCal Region G3 Quality is looking for experienced Field Construction Materials Testing Technicians for projects throughout the Southern California region. We are seeking candidates who demonstrate a strong work ethic with a professional attitude. The ideal candidate will have asphalt coring, concrete testing, and nuclear gauge usage experience for a civil engineering or materials testing company. Responsibilities • Timely documentation of all testing activities and observations., • Daily coordination with Client and Contractor representatives., • Strict adherence to required test methods., • Performance of duties in a safe manner. Pay Scale • Local 12 Field Inspector: $64.18 - $67.96 an hour, • Local 12 Apprentice: $39.58 - $59.36 an hour, • Prevailing wage rates apply.Benefits, • Health & welfare and retirement/pension plans are offered through the union., • Union benefit links: OE12 Benefits, • G3 offers a 401k benefit plan, separate from the union plan. Position Requirements • Must be part of the Operating Engineers Local 12 union, or willing to join the union., • Physically able to regularly lift and /or move up to 75 lbs., • Valid drivers’ license., • Ability to read plans and specifications., • Nuclear gauge user HAZMAT certification., • Current Caltrans certification in various test methods relating to soil, concrete, and hot mix asphalt testing., • Other certifications are a plus (such as ACI, NICET, ICC, QSP). EEO Statement G3 Quality, Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. About the Company G3 Quality is a team of engineers and professional experts who’ve helped countless clients deliver successful infrastructure projects for the past decade. Through a mix of world-class Quality Management, Pavement Engineering, Inspection, and Materials Testing services, we are your partner every step of the way. Since 2013, we have built a strong reputation among contractors, design firms, construction managers, and local state and government agencies across the West Coast. Led by industry veterans Chris Gerber and Susan Pierce, our team has grown into a force of over 125 professionals since its inception, with a corporate office in Cerritos, California, and additional laboratories and offices in Bakersfield, Redlands, and Sacramento. Thank you for your interest in employment opportunities at G3. Powered by JazzHR QjRZOdFa2q

Job Description O2EPCM, Inc. is a prominent award-winning experienced firm providing Professional, Technical, Consulting and Management Services in the Planning, Design, Engineering and Construction Industry to Local, State, Federal Government Agencies, Utility Companies and Private Clients. We are dedicated to delivering innovative and sustainable solutions for a variety of projects. Employee Benefits: • 100% paid base coverage (Health, Vision, & Dental insurance)., • 401(k), • Paid Holidays, • Paid Sick, • Paid Vacation, • EAP - Employee Assistance Program O2EPCM, Inc. https://o2epcm.com/ Position Description Summary The position of the Construction Inspector will support LAWA's construction inspection and work as a member of LAWA Quality Assurance & Construction Inspection Division across multiple projects within LAWA's Tenant Improvement Program primarily focusing on building disciplines. *Candidates must possess a minimum of five years of experience performing inspection *Candidate must demonstrate a clear understanding and interpretation of LA City Building Code & ADA Requirements *Successfully hired candidates must be able to pass a background check and possess a LAWA SIDA badge prior to official start. *Candidates must have the ability to walk extremely long distances during the shift as this is the primary means of traversing between expansive terminals. *Candidate must be able to climb stairs, ladders, scaffold, and crawl into areas associated with the work taking place in the terminals. *Candidate must be able to work the day, swing, modified, or night shifts, including weekends as dictated by the contractor's schedule. Essential Job Duties • Conduct comprehensive daily inspections across building and terminal construction projects, ensuring compliance with applicable codes and project specifications, review and interpret construction documents including blueprints and shop drawings, submittals, RFIs, and change orders., • Demonstrates strong proficiency in preparing comprehensive daily inspection reports that clearly document the WHO, WHAT, WHEN, WHERE, and HOW of all observed construction activities, ensuring accuracy, clarity, and accountability in tracking progress and identifying issues, deficiencies, or safety concerns in a timely manner., • Verify contractor compliance with local jurisdiction's requirements, building codes and LAWA-specific proprietary standards., • Support special inspections and testing activities, coordinating with engineers, contractors, and third-party agencies as needed., • May be tasked to Track and document time-and-material work, field changes, and job quantities, • May be tasked to Assist in validating contractor progress payment requests based on an approved schedule of values. Perform inspections related to building construction including, but not limited to: • Clearing, grubbing & demolition of building structures., • Excavations, trenching & shoring., • Grade & elevation survey., • Structural Backfill & compaction for underground utilities., • Structural & Nonstructural concrete work., • Formwork, Footings & micro piles., • Sewer & Storm drain inspection., • Metal stud framing drywall installation & interior finishes., • Door & hardware with its components., • T bar ceilings, hard lids & other fire rated components Hardware/Software Knowledge • Knowledge of Project Management Information Software used for inspection/document control (i.e., Microsoft Office, Outlook, Xcel, Word, PM Web, Adobe Pro, Bluebeam, etc.)., • Computer proficiency to review and utilize electronic equipment for contract documents efficiently, including change orders, submittals, RFIs, and other inspection documents, with minimal supervision, • The ability to write clear and concise documents depicting daily progress of the work may be assigned to a program where the inspector prepares monthly progress payment request, tracks various changes, verifies time and material work, measure, and documents job quantities. Professional Experience Level/Minimum Qualifications• Candidates must possess a minimum of five years of experience performing inspection • Training in the use of fall protection equipment and harness with lanyard., • Confined space awareness certification., • Cal OSHA 30 hr. training and certificate., • NFPA 70E certification required for electrical inspectors. Preferred Qualifications and Experience: • ICC certifications and Deputy Inspector Licenses are preferred but not required., • Inspectors with good knowledge and ability to inspect large scale construction of airport and public building facilities, which may include steel and concrete structures, architectural finishes and components, and other construction related to the airport terminal operations to ensure conformance with safety regulations, plans, specifications, and other applicable documents., • Possess good knowledge of LA City Building codes and ADA requirements. Experience in but not limited to inspecting demolition and the construction of buildings from start to finish., • Expertise in identifying and addressing deficiencies, ensuring that all aspects of construction meet the required standards., • A strong understanding of diverse requirements., • Excellent communication and time management skills. Education/Training • High School diploma (or equivalent) Element-Specific Requirements/Notes • May assume other duties as required/needed., • May be required to work various shifts, including day, swing, and night., • Shall be open to work modified schedules, including nights and weekends, as dictated by the contractors' work activities and accelerated project schedules., • Availability to work overtime as required to meet project deadlines and ensure timely completion of tasks is preferred. Please note, if you move forward in the submission process, you will be asked to provide the following below. • Most updated resume, • Certifications or Licenses obtained, • 3-4 Professional References, • Project List with values, dates, and company of any projects worked O2EPCM, Inc. is a prominent award-winning experienced firm providing Professional, Technical, Consulting and Management Services in the Planning, Design, Engineering and Construction Industry to Local, State, Federal Government Agencies, Utility Companies and Private Clients. We are dedicated to delivering innovative and sustainable solutions for a variety of projects. Employee Benefits: • 100% paid base coverage (Health, Vision, & Dental insurance)., • 401(k), • Paid Holidays, • Paid Sick, • Paid Vacation, • EAP - Employee Assistance Program O2EPCM, Inc. https://o2epcm.com/ Position: Business Analyst I Salary Range: $75,000 - $82,000 Location: Onsite (Los Angeles, CA) Type: Full-Time Position Description: • SME for department systems and system integration and implementation projects., • Reconcile financial accounts and reports. Identify discrepancies or inconsistencies and resolve expeditiously to maintain controls., • Prepare and/or review assigned financial statements, reports and analysis and address/ resolve issues., • Responsible for the accrual process, journal entry process, debit/credit memos, etc. ensuring accuracy and timeliness. Includes the preparation and routing of such for approval as well as the maintenance and reconciliation of logs., • Approve/release invoices per accounting procedures and as assigned by Finance Manager., • Prepare and/or review, as assigned, vendor files or other supporting documentation for vendor payments., • Communicate with applicable construction and professional services vendors as needed., • Assist in processing of general contractor's payment analysis., • Work directly and effectively with the accounting team and other department personnel on bond related matters., • Evaluate and ensure bond compliance in regard to financial accounting, reporting and invoice payments., • Complete any bond related assignments as assigned by manager. Minimum Required Qualifications: • 3-5 years of experience in accounting, finance, or related fields., • Bachelor's degree in business or related degree., • Experience in working with business enterprise or accounting systems., • Experience performing historical trends and analyze results., • Experience creating monthly financial reports and analyzing results., • Ability to work independently and in a team environment., • Ability to work in a fast-paced environment., • Ability to communicate and present effectively with all levels of an organization., • Intermediate proficiency in Excel, MS Word, and PowerPoint., • Ability to lead projects to successful conclusion. Preferred Qualifications: • Bond program experience, • Construction program experience, • Costpoint and/or Proliance experience NO PER DIEM. These are W2, long-term jobs with full benefits. NO relocation packages.

Job DescriptionSalary: $95,000 - $148,000 PGH Wong Engineering, Inc. has a proud and lengthy history of delivering innovative, challenging, and complex projects. PGH Wong was established in 1985 on its extraordinary foundation in systems engineering and is now a full-service engineering, architecture, construction management, and program/project management consulting firm for public and private entities across the nation. This Mechanical Electrical Plumbing (MEP) inspector position will be based in West Los Angeles and on project sites in the area. Responsibilities include but are not limited to the following: • Visits construction sites and inspects each stage of construction up to completion. Interpret plans, specifications, and codes (general and specific to MEP) and verify that contract work is performed in accordance with them. Assist in obtaining approved designs and permits from utility companies for services to construction sites., • Monitor construction sites for safety violations. Prepares Non-Conformance Reports when work is not performed to the approved standards. Maintains daily activity logs and reports., • Review or prepare interim progress reports for contractor payments. Monitor contractor testing activities. Prepare reports on labor, material, and equipment on site. Determine construction conforms to plans and specifications; if not, issue Non-Conformance Reports for corrective action., • Assist in maintaining, supporting, and promoting a safe work environment while complying with the projects safety rules, policies, and procedures., • Coordinates preparation of inspection cost estimates and maintenance records., • Arranges, coordinates, and oversees technical inspections such as electrical, mechanical, landscaping, soil testing, concrete, and asphalt mixes, and reinforcing steel for conformance to specification requirements., • Coordinates test laboratory activities and compares verifications of test results with results from the contractors laboratory., • May allocate inspection resources and supervise inspectors., • Attends various meetings as needed., • Perform other duties as may be required. Qualifications and Experience: • Approximately five (5) years of MEP rail inspection experience for Associate positions, approximately ten (10) years of experience for Senior and Lead positions which reflect a progressively increasing level of responsibility on complex projects as a General Contractor, Building Construction Supervisor, Building Inspector of large commercial or industrial construction projects, heavy construction projects, transportation, or transit construction projects for the appropriate disciplines including utilities, civil, architectural, structural, electrical, mechanical and trackwork., • ICC Certificate of Reinforced Concrete or Masonry, ACI Registered Contraction Inspector License, comparable Deputy Inspection License for a county or city agency. NICET certification, or other alternative certification form an acceptable nationally recognized organization, is highly desirable where applicable to the Inspection of that particular trade., • Knowledge of OSHA safety regulations and Cal-OSHA/OSHA 30 training certification, or will obtain certification., • Able to read plans and have a good understanding of project specifications., • Must be able to interpret and implement company-mandated safety policies. Skills and Competencies: • Must be able to submit written reports and documentation., • Good organizational skills., • Good Computer skills. We are an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including race, color, sex, gender, age, disability, religion, national origin, political belief, veteran status, sexual orientation, gender identity, domestic partner status, marital status, disability, weight, height, or AIDS/HIV status.

Job DescriptionAbout Owais Construction Group Owais Construction Group is a Los Angeles-based construction management firm with experience in construction, engineering, architecture, and inspection to deliver exceptional results. We specialize in project management, staffing augmentation, and comprehensive construction management services, ensuring projects are completed on time, within budget, and to the highest standards of quality and safety. Position Overview: Owais Construction Group is seeking a knowledgeable and dependable Lead Construction Inspector with 10+ years of experience to manage and oversee the day-to-day inspection and coordination of the City’s Capital Improvement Projects (CIPs). This role demands an experienced professional who can effectively manage project documentation, enforce compliance, and ensure the quality and safety of construction work in the field. Key Responsibilities: • Review project plans and specifications., • Attend project-related and community meetings., • Maintain detailed project files in line with the Local Assistance Procedures Manual and City protocols., • Conduct field observations and inspections of daily construction activities, ensuring pedestrian and vehicular safety., • Monitor compliance with the Storm Water Pollution Prevention Plan (SWPPP)., • Obtain, review, and field-verify asphalt, concrete mix designs, and other submittals., • Track and inspect the perpetuation of survey monuments by contractors., • Prepare accurate and timely daily inspection reports., • Track contractor schedules and assist in identifying delays or issues., • Ensure labor compliance adherence by contractors., • Support the preparation of Weekly Statement of Working Day reports., • Coordinate with City engineers, utility companies, and other stakeholders., • Participate in public outreach efforts before and during construction phases., • Review and approve contractor progress invoices., • Evaluate and recommend actions on contract change orders., • Maintain an up-to-date set of construction drawings and specifications on-site., • Assist in coordinating the final inspection and prepare the project punch list.Preferred Experience in the Following Project Types:, • Water Infrastructure Projects, • Sewer Infrastructure Projects, • Storm Drain Infrastructure Improvements, • Street Reconstruction Projects, • Pavement Rehabilitation Projects, • Municipal Facility (Building) Improvements, • Park Improvement/Reconstruction Projects, • Stormwater Projects (Low Impact Development, Green Streets, Regional Systems)Qualifications:, • Minimum 10 years of relevant experience in public works or capital improvement inspections, • In-depth knowledge of construction practices, materials, and local/state standards, • Strong communication, record-keeping, and coordination skills, • Experience with Local Assistance Procedures Manual (LAPM) compliance preferred

Job DescriptionBenefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Pacific Pros is seeking Construction Inspector, Deputy Building for Construction Projects to be a representative for Los Angeles World Airport (LAWA). Work Location: LAWA has required the candidates be local for this position. Region: Los Angeles, CA Status: Full-time on-site. Opening: April 2026, Immediate Working Hours: Must be able to work any assigned shift - day, swing, or night - as required to meet the contractorsconstruction schedule. Position Description Summary The Deputy Building Inspector will provide special inspection support for the LAWA Quality Assurance and Construction Inspection Division across multiple projects within LAWAs Capital Improvement Program. This role requires knowledge of multiple code requirements, effective communication, and time management. Serve as Owner's representative. The staff will support LAWAs Quality Assurance & Construction Inspection Division across multiple projects within LAWAs Capital Improvement Program. *Candidates must possess valid Los Angeles City Department of Building and Safety (LADBS) DeputyLicenses in Concrete Construction, Spray-Applied Fireproofing, Drilled-in-Anchors/Seismic Resistance,and Steel Construction. Possession of other deputy licenses is preferred. . *Proof of Cal-OSHA 30-hr training within the last 4 years prior to assignment. *Successful candidates must have LAWA SIDA badge prior to official start of work. *Must be able to work any assigned shift - day, swing, or night - as required to meet the contractors construction schedule. Essential Job Duties The duties for this position include, but are not limited to, the following: • Create and maintain comprehensive daily inspection reports that capture the WHO, WHAT,WHEN, WHERE, and HOW of all construction work activities, while ensuring the reports areclear and concise to accurately reflect daily progress., • Assist in reviewing monthly progress payment requests when assigned to a program., • Track various changes, verify time and material work, measure, and document job quantities., • Conduct special inspections on various disciplines., • Possess experience, knowledge, and understanding of methods used throughout construction., • Possess valid Los Angeles City Department of Building and Safety (LADBS) DeputyLicenses in the following disciplines:, • Concrete construction, • Steel construction, • Drilled-in anchors/seismic resistance, • Spray-applied fireproofingHardware/Software Knowledge, • Knowledge of Project Management Information Software used for inspection/documentcontrol (i.e. PM Web, Adobe Pro, Bluebeam, etc.)., • Computer proficiency to review and utilize electronic equipment for contract documentsefficiently, including change orders, submittals, RFIs, and other inspection documents, withminimal supervision. Required Qualification/Professional Experience Level • 5 years or more of experience performing as a LADBS Deputy Building Inspector on large-scale projects., • This includes overseeing and ensuring compliance with building codes andregulations on significant construction projects., • Involvement in complex projects that require coordination with multiple stakeholders, including contractors, engineers, and city officials., • Expertise in identifying and addressing code violations, ensuring that all aspectsof construction meet the required standards., • US Employment Authorization without needing sponsorship, • Excellent written and oral communication skills, • A valid Drivers License and compliance with PACIFICs Vehicle Policy, if driving is required., • Proficiency with common Microsoft Office Applications (Word, Excel, PowerPoint and Outlook), SharePoint and Adobe Acrobat (PDF files), • 3+ References from Clients Preferred Qualifications and Experience • Experience overseeing and ensuring compliance with building codes and regulations on significant construction projects., • Involvement in complex projects that require coordination with multiple stakeholders, including contractors, engineers, and city officials., • Expertise in identifying and addressing deficiencies, ensuring that all aspects of construction meet the required standards., • Must be open to learning the prescriptive items required by the agency., • A strong understanding of diverse code requirements., • Excellent communication and time management skills. Preferred Qualifications • Experience at the journey level as an electrician, with a focus on the installation and repair of electrical systems in public works, institutional, commercial, or industrial settings., • Experience overseeing and ensuring compliance with building codes and regulations on significant construction projects., • Involvement in complex projects requiring coordination with multiple stakeholders, including contractors, engineers, and city officials., • Expertise in identifying and addressing deficiencies to ensure all aspects of construction meet required standards., • Must be open to learning the prescriptive items required by the agency., • Strong understanding of diverse code requirements., • Excellent communication and time-management skills.Minimum Education/Training, • High school diploma (or equivalent), • Higher education level is preferred., • OSHA 30 (prior to assignment); valid certificates obtained within the past 4 years is acceptable., • Current ICC Certification as a Commercial Electrical Inspector, • Fall Protection and Harness Training, • Confined Space Entry TrainingElement-Specific Requirements/Notes, • May assume other duties as required/needed., • May be required to work various shifts, including day, swing, and night., • Shall be open to work modified schedules, including nights and weekends, as dictated by the contractors' work activities and accelerated project schedules., • Availability to work overtime as required to meet project deadlines and ensure timely completion of tasks is preferred., • LAWA has required the candidates be local and available fully on-site for this field position.Compensation, • Prevailing Wage Position. For higher education degrees, a higher salary will be considered.

Job Description ACC Environmental Consultants, Inc., ACC, has an opportunity for an experienced environmental, industrial hygiene or health & safety technician with a minimum of 2-years of experience AND at least one of the following certifications: Cal-OSHA Certified Site Surveillance Technician, California Department of Public Health (CDPH) Lead Inspector-Assessor or CDPH Lead Project Monitor. In this position, the successful candidate will conduct building related environmental assessments, assist with project design and monitor contractor activities during remediation activities. The position will focus on asbestos, lead, water intrusion and indoor air quality projects; thus strong understanding of building systems is required. Additional activities will likely include working on concrete/slab moisture sampling, subsurface (soil and groundwater) investigations, Phase I Environmental Assessments (ESAs), hazardous materials management audits, LEED air sampling and waste diversion management, etc. depending on qualifications. Candidates should be energetic, interested in building systems, health & safety concerns. Familiarity with computer operations (Mac & Windows), AcrMicrosoft Office and basic drafting programs is mandatory. Technicians will spend the majority of their time at projects sites throughout the Southern or Northern California area and occasionally throughout California. Technicians will also prepare reports and other project documents related to field operations; assist with occasional equipment maintenance & calibration and general office support. Minimum Requirements: • Cal-OSHA Certified Site Surveillance Technician, California Department of Public Health (CDPH) Lead Inspector-Assessor or CDPH Lead Project Monitor Certifications, • Competent written and verbal communication skills, • Strong organizational abilities and strict attention to detail, • Computer literate, • Willing to travel, work evenings and weekends as projects require, • Be in good physical health and able to wear respiratory and other personal protective equipment, • Ability to climb ladders, navigate crawl spaces, lift/carry equipment (generally up to 50 lbs), stand for long periods of time., • Valid driver’s license and reliable transportation Desirable Qualifications: • Recent Graduate with BA/BS in environmental sciences, health & safety, industrial hygiene or building related fields., • Basic drafting skills, • Knowledge of building systems & construction techniques, • Ability to read & understand construction drawings (architectural & MEP), • 40-hour HAZWOPER certification, AHERA Building Inspector and Contractor/Supervisor certifications Benefits: ACC provides a comprehensive benefits package to regular full-time and qualifying part-time employees that includes: • Eligibility to participate in the company Employee Stock Ownership Program for qualifying individuals., • Group Medical Insurance, • HSA Contributions to qualifying plans, • 401(k) Retirement Savings Program, • Paid Time Off, • Nine Paid Holidays Per Year, • Bonus Program, • Employee Assistance Program, • Long-term disability insurance, • Life insurance, • Professional development funds for professional license fees, memberships, training and seminars

Job Description Ardurra is seeking a Senior Construction Inspector to join our Public Works Inspection Group in Los Angeles and Newport Beach, CA! Ardurra is a respected and growing national engineering and management firm that boasts is ranked in the top 100 design firms by ENR (#84 in 2024), top 5 Zweig Hot Firms (#5 in 2024) and top 40 Zweig Firms to Work for (#36 in 2024). The firm maintains its status as a premier U.S. Engineering Firm that makes a profound, positive impact on our nation’s infrastructure while expanding and strengthening our people-centric culture. Ardurra’s Construction Management Practice successfully delivers important infrastructure improvement projects to our clients. We are proud of our reputation for providing best in class project and construction management solutions with a fair, firm, proactive and efficient approach. This position is open to both part-time and full-time opportunities. Primary Function A successful candidate will be passionate, self-motivated, proactive, quick-thinking, flexible, able to pivot when necessary, thorough and able to juggle multiple and diverse responsibilities with a strong emphasis on organization and an unwavering attention to detail. The ability to identify, contemporaneously report and proactively mitigate potential field design, safety, quality, schedule, construction and budget impacts is essential. This position requires the ability to effectively interact with a wide range of internal and external team members with varying and sometimes conflicting concerns in a collaborative workflow that drives positive results for client projects and the company. This is a demanding and fast-paced position that requires someone who is a problem solver, positive thinker and is able to exercise good judgment and communication If selected, the candidate will play an integral role in Ardurra’s inspection team servicing our Southern California clients and managing a variety of capital improvement projects ranging from water/wastewater, utility undergrounding, dry and wet utility installations, trenchless rehabilitation solutions, road rehabilitations and widenings, bridges, parks, buildings, as well as other and other critical infrastructure and facility improvements. Duties include, but are not limited to: • Represent the Client’s interests at all times., • Assist with field public relations., • Monitor the compliance with the project contract, specifications, approved traffic control plans or Watch Manual (MUTCD). National Pollutant Discharge Elimination System (NPDES), OSHA / Contractor’s Safety Plan requirements, quality assurance., • Coordinate 3rd party special / deputy inspections & materials testing; address unsatisfactory inspection & /or test results through satisfactory resolution., • Conduct contractor/subcontractor employee interviews for confirmation of proper payment of wages (assist with labor compliance)., • Assist the construction managers in monitoring & documenting the contractor’s adherence to the approved construction schedule., • Be present on the job site when construction is in progress & when inspection is required., • Prepare daily inspection reports (Daily Activity Report, Weekly Statement of Working Days, etc.), as required., • Measure & verify the project pay item quantities, in-place. Confirm pay item quantities with the contractor prior to submission of invoice for payment., • Develop punch list items & monitor satisfactory completion., • Support one to several simultaneous projects. Qualifications • High School diploma or equivalent. Civil Engineering related coursework/certifications, Associates Degree is preferred, • 15+ years in the Construction field or Construction Management/Field Services, • Knowledge of & ability to interpret, technical specifications, contract requirements, engineering drawings, & standard construction details, • Background in permit & capital project inspections on parks & playground, road rehabilitation & widenings, building facilities, water / wastewater improvements, & other various infrastructure construction, • Experience with monitoring & proper implementation of traffic control, Asphalt Concrete (AC) & Concrete roadways, sidewalk, curb & gutter, & underground utilities, • Demonstrate knowledge in construction inspection applications., • Knowledge of regulatory requirements such as CalOsha & Storm Water Pollution Prevention Plans (SWPPP) & other regulatory agencies as required., • Strong verbal & written communication skills & familiarity with operating smart devices & computers is preferred, • Caltrans or LA Metro experience strongly is preferred., • APWA Certified Public Infrastructure Inspector (CPII) & Qualified Stormwater Pollution Prevention Practitioner (QSP) Certifications are preferred, • Valid CA driver's license, • Willingness to travel Compensation: Our compensation structure consists of part-time to full-time hourly salary in compliance with the appropriate California Prevailing Wage Determination. Why Ardurra? While Ardurra offers competitive compensation and rich benefits programs, it is our culture that truly sets us apart from our peers. We nurture a family-like culture, striving to create a work environment that is enjoyable, challenging and rewarding but also fun. We are acutely focused on developing our staff, whether through our internal Ardurra Academy or through our industry-leading Leadership program. We have made a deliberate and focused commitment to nurture a people-centric culture where people are: valued as individuals; supported in their professional and career development with multiple, varied career paths; provided the tools and resources to be successful, engaged, and satisfied in their work; and positive benefits, time-off programs, and flexibility to help maintain a healthy balance between work and home. NOTICE TO THIRD PARTY AGENCIES: Ardurra does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Agency Agreement, Ardurra will not consider or agree to payment of any referral compensation or recruiter fee. If a resume or candidate is submitted to any hiring manager without a previously signed agreement, Ardurra reserves the right to pursue and hire those candidate(s) without any financial obligation to the recruiter or agency. These candidates will be considered property of Ardurra. We’re not currently looking to add any more agencies to our list of approved vendors, so please do not contact any of our managers or recruitment team with sales calls or details of your candidates. #LI-LC

Job DescriptionAbout Zephyr Rail Zephyr Rail is an engineering design and construction management firm based in Orange, CA. We specialize in providing comprehensive solutions in railroad design, construction management, and UAV solutions. We are proud to have earned Zweig Group’s recognition as a "Best Firms to Work For" for three consecutive years, demonstrating our commitment to our team and our industry. Job Summary As a Civil Inspector - Rail, you will be Zephyr Rail's eyes and ears on-site, ensuring the highest standards of quality and compliance on our heavy construction projects with a focus on rail and track. Reporting to the Resident Engineer, you will conduct daily inspections of all civil construction activities, materials, and components. Your keen eye for detail and expertise in industry certifications will be vital as you document non-conforming conditions and verify corrective actions, ensuring all work meets rigorous contract specifications for successful project delivery. Responsibilities • Perform daily quality control inspections and documentation in accordance with approved procedures., • Monitor and document materials, testing, and workmanship in accordance with contract requirements., • Verify that contract work is in conformance with the contract documents, QA/QC standards, and approved inspection/ test plans., • Document non-conforming conditions and verify the contractor's corrective actions., • Observe and inspect field sampling and testing of materials., • Support the Resident Engineer and CM team in maintaining accurate daily inspection records and reports., • Participate in coordination meetings and safety briefings as required., • Ensure all inspection activities adhere to agency safety and environmental regulations. Qualifications • High School Diploma or equivalent (associate or bachelor’s degree in civil engineering preferred)., • 10+ years of experience in heavy construction with a focus on rail/track., • It is mandatory to hold both ICC and ACI certifications., • Demonstrated knowledge of track construction, concrete, earthwork, and drainage systems., • Strong understanding of QA/QC procedures and material testing standards., • Ability to read and interpret drawings, specifications, and submittals., • Excellent written and verbal communication skills for daily reporting., • Ability to work effectively in a fast-paced, deadline-driven environment with multiple contractors and stakeholders., • Authorized to work in the U.S. Salary Range: $104,000 - $187,200 / annually Benefits Paid Medical, Dental, and Vision, 401(k) Plan (with company match), Paid Time Off (PTO), Paid Holidays, Disability Insurance, Educational Assistance and Licensure Support, Performance-based Bonuses, Service Awards, Flexible/Hybrid Work Arrangements (role-dependent). How to Apply We're excited to hear from you! Feel free to apply directly on our careers page or learn more about the opportunities at www.zuirail.com/current-openings/ . If you don't find exactly what you're looking for, don't hesitate to send your resume to careers@zuirail.com. We would be pleased to consider you as a potential new member of our passionate team! At Zephyr Rail, we're an equal opportunity employer dedicated to fostering diversity and inclusion. Note to Recruiters and Job Placement Agencies We do not accept unsolicited resumes or candidate profiles from recruiters or agencies. We will consider any unsolicited resumes we receive as our property and will process them accordingly. We will only consider direct applicants. #LI-SB1 Powered by JazzHR wbV0McpKAq

Job Description Position Summary The Quality Inspector III role is responsible for the day to day recording and validation of material between customers, vendors and operations. Essential Duties and Responsibilities • Inspects materials and products, for conformance to specifications, • Inspects finished product for quality and customer requirements., • Inspects finished or in-process fabricated or mechanical parts, equipment and assemblies of a complex nature and determines acceptance or rejection., • Carry out policies and procedures for testing and evaluating product., • Responsible for operating mechanical and electrical test equipment., • Working to Standard Operating Procedures (work instructions), • Assists in recording of Non-conformities of parts/product., • Assisting in the controlling/segregating of conforming vs. non-conforming parts /product, • Evaluates parts or assemblies against standards, blueprints, engineering, and specifications, • Leads and directs the work of others and assists in the training of less experienced inspectors., • Work safely at all times and report any unsafe conditions or injuries to your Supervisor or Manager immediately., • Ability to operate a CMM., • Assists in the training of less experienced inspectors., • Other duties, as assigned by supervision or management., • Assesses own strengths and weaknesses; Pursues training and development opportunities; Strives to continuously build knowledge and skills; Shares expertise with others., • Displays willingness to make decisions; Exhibits sound and accurate judgment; Supports and explains reasoning for decisions; Includes appropriate people in decision-making process; Makes timely decisions., • Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality., • Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly., • Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events., • Other duties as assigned. Position Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and Experience: • 7-10 years of experience in the field or in a related field., • High school diploma or GED, and up to one year work experience., • Strong and extensive experience with portable and fixed CMM inspection equipment, • Experience with coordinate measuring machine (CMM) programming a plus. Knowledge, Skills and Abilities: Knowledge • Extensive knowledge and experience in all areas of inspection., • Familiar with a variety of the field’s concepts, practices, and procedures., • Ability to perform calculations utilizing arithmetic such as addition, subtraction, multiplication and division normally attained through elementary school education., • Ability to perform calculations utilizing algebra and fractions., • Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Technical Skills • Must be proficient in MS Office (Excel, Word, PowerPoint, and Outlook), • Must be proficient in PCDMIS and/or VDMIS., • Knowledge of Verisurf and Catia is a plus. Communication Skills • Excellent communication skills, oral and written., • Ability to communicate simple facts with courtesy and clarity., • Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Requirements: The employee must occasionally lift and/or move up to 25 pounds. • The employee is frequently required to reach with hands and arms., • The employee is occasionally required to stand; walk and stoop, kneel, crouch, or crawl., • Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Job Description Job Description We are a provider of professional engineering, construction management and public works inspection services to cities, water/sewer/special districts and other public agencies. Our firm specializes in construction, program, and project management services. Who we’re looking for: Public Works Inspector will work on Public Works Construction projects including concrete curbs, gutters, curb ramps, sidewalks, storm drains, RCP, water & sewer main replacements, water/sewer laterals, street lights, traffic signals, median landscape work, monument/way-finding signs, utility relocation & adjustments, grind & overlay, slurry/cape/chip seal, roadway re-construction & rehabilitation, ARHM, conventional asphalt, traffic loop replacement, striping and signage. The inspection work will be for Cities and Water Districts in Los Angeles, Orange, San Bernardino and Riverside Counties. These positions suit individuals who want to work part-time or full-time and on a project base. Responsibilities & Duties: • Reviews Plans, Specs. & Estimates (PS&E) thoroughly, highlights/tabs them; has a thorough understanding of the project., • Oversees the day to day project construction activities and be the eyes and ears of the client and the firm., • Monitors and records all work conducted by the contractor., • Prepares a comprehensive Daily Report, including measurements, quantities, activities, etc., • Identifies and records any construction obstacles impacting the scope, plans, specifications, and/or estimate., • Communicates with the Construction Manager, City, Contractor, and other parties involved in the project., • Documents the contractor's daily compliance/violations ensuring quality control of project construction activities., • Understands general construction, methods, materials, safety practices, quality control, and contract administration., • Conducts on-site inspections, enforcing compliance of plans, specifications, standards, safety practices, and materials., • Reviews traffic control plans and procedures to ensure compliance with construction zones., • Performs constructability reviews of plans and specifications., • Assists in review of contractors claims, change orders, etc., • Attends pre-construction, kick-off, progress, and field meetings., • Checks dimensions, measures quantities, materials' use and, • Prepares daily reports and recommendations on project construction activities. Qualifications: Ten (10) years of Construction Inspection experience working for Cities or Counties Public Works Departments or Water Districts or providing similar services for Cities, Counties and Water Districts as a consultant. Applicants without the appropriate background, City, County, Water/Sewer/Special District Inspection Experience will not be considered. · Abilities: · Good oral and written communication skills. · Knowledge with computer related tasks. · Ability to prepare reports and correspondences. · Ability to identify project issues, establish solutions, and review outcomes. · Familiarity with local, state, federal regulatory requirements, standard plans and specifications for public work construction (Greenbook) including standards for water and sewer main replacement projects. . Job requires driving to the job sites and meetings. Job Types: Project Base Company DescriptionA Project/Construction Management, Staff Augmentation (Consultant City Engineer, Public Works Director) and Public works Inspection firm. Applications without the appropriate background are discouraged to apply and will not be considered.A Project/Construction Management, Staff Augmentation (Consultant City Engineer, Public Works Director) and Public works Inspection firm. Applications without the appropriate background are discouraged to apply and will not be considered.

Volta, LP is a leading developer, owner, and operator of utility-scale energy storage projects across North America.We are at the forefront of the fast-growing battery energy storage market, and our projects are helping to transition the nation’s electric grid to a cleaner and more reliable future

Are you looking for your next challenge? Are you ready to work with a performance-based small company? At Zantech, we are a dynamic Woman Owned Small Business focused on providing complex, mission-focused solutions with a proven track record of outstanding customer performance and high employee sati

Are you a Project Manager in the Architecture, Engineering, and Construction field seeking purpose, challenge, and talented colleagues? With a diverse portfolio of residential, energy, commercial, light industrial and public programs, CESO has the opportunity for you to develop your career.We develo

Kasisto is seeking a skilled and versatile Technical Project Manager to work with customers on the implementation of agentic applications for financial services.This role will include extensive customer communications as well as development of tools to accelerate implementation and integration with

Prowess Consulting is a consulting firm that specializes in helping the largest enterprises in the technology industry define, manage, benchmark, and market their solutions and services.We take great pride in investing the time and effort to gain a deep understanding of our clients’ technologies,

Our excellent salary and benefits package includes medical, dental, vision, life insurance, short and long-term disability coverage, education reimbursement, 401(k), performance bonuses, and an employee stock program.Employee Resource Groups and Programs offered include the Young Professionals Group

Power, a Blackstone portfolio company, is a leading developer, owner, and operator of utility-scale energy storage and hybrid renewable projects that power our communities and cities.Our mission is to responsibly decarbonize the grid and make North American energy markets more affordable, sustainabl

At Mesh, our mission is to enable consumers to pay and be paid with any asset.Today, trillions of dollars in tokenized assets exist but remain largely unusable for everyday commerce.Mesh is bridging this gap by making crypto payments reliable, useful, and ubiquitous.We combine a powerful orchestrati

As an employee-owned company, Providence Engineering’s benefits and perks are designed to foster a rewarding work/life balance and truly support our employee-owners throughout their career.Employee Stock Ownership Plan (ESOP).Providence is 100% employee owned.Our ESOP serves as a retirement plan f

Customer Success Project Manager.LiveData | Remote, United States (Eastern Time preferred) | Full-Time.LiveData is a healthcare technology company automating clinical and operational workflows across Electronic Health Record (EHR) systems.Our engineering team treats AI coding assistants as standard

We are driven to always be the firm of the future, to challenge the status quo, and to provide holistic business solutions to our clients in new and innovative ways.We are the world's largest global law firm, with 12,000+ people across 80+ countries.Driven by the diverse perspectives of our people,

Are you a Project Manager in the Architecture, Engineering, and Construction field seeking purpose, challenge, and talented colleagues? With a diverse portfolio of residential, energy, commercial, light industrial and public programs, CESO has the opportunity for you to develop your career.We develo

Concrete, soil and foundation engineering reports.

The Project Manager I is an entry-level role on TEECOM’s internal Project Management path, reporting to Team Leads.You keep the team’s delivery machinery running — tracking, documentation, coordination, and reporting — so that Team Leads can focus on client relationships and strategic leader

That is, a love for people, for improvement, for human advancement through information technology.We are a people-centered business with a desire to serve others.We are diverse and unified; creative and collaborative; a collection of complementary, not competing talents.And though on the surface we

Intix software solutions focus on payment and securities transaction archiving, transaction tracking, and business activity monitoring.Our clients are large international financial institutions.As Customer Service & project Manager, you are a key member of the Intix Customer Excellence Team.You will

Avantus is shaping the future by making reliable, low-cost clean energy a global reality.Our legacy of leadership in next generation solar energy includes developing one of the nation’s largest solar clusters and one of the first projects to beat fossil fuel prices back in 2016.Today, we are expan

BlastPoint is a B2B data analytics startup located in the East Liberty neighborhood of Pittsburgh.We give companies the power to engage with customers more effectively by discovering the humans in their data and understanding customer journeys.Serving diverse industries including energy, finance, re

MicroHealth is seeking a Technical Project Manager to provide critical PMO and Technical Project Management support for the Department of Veterans Affairs (VA) within the BAM PMO TMS project.The Technical Project Manager will work directly with VA government product managers to oversee Agile

We envision a world in which all people have access to high quality and enduring solutions to improve and maintain their health and well-being.MCD Global Health aspires to be a premier partner of choice and a recognized leader, innovator, and trusted partner in healthcare and public health program d

We specialize in solving complex problems through website and web app strategy, design, and development using open-source content management systems (primarily Drupal and WordPress, and headless or composable architectures).Our clients include some of the most well-known museums, nonprofits, univers

Are you a Senior Project Manager in the Architecture, Engineering, and Construction field seeking purpose, challenge, and talented colleagues? With a diverse portfolio of residential, energy, commercial, light industrial and public programs, CESO has the opportunity for you to develop your career.We

Develop and execute comprehensive test plans for our CaseStatus web app, Android app, and iOS app, utilizing Ghost Inspector for both regression and feature testing.

Quality Control Inspector (Medical Device). Quality Control Inspector (Medical Device). They are seeking a highly motivated and flexible Inspector with a strong background in the medical device field.

Sheet Metal Superintendent (Commercial HVAC).Competitive Compensation + Benefits.Confidential Search – Established Mechanical Contractor.We are working with a well-established mechanical contractor in Southern California that is seeking a Sheet Metal Superintendent to oversee commercial HVAC proje

Mechanical Superintendent - Water/Wastewater Construction.Location: Ventura, CA, US Los Angeles, CA, US SantaFe Springs, CA, US Requisition ID: 174594 Job Level: Mid Level Home District/Group: Southern California District Department: Field Supervision Market: Water/Wastewater Employment Type: Full T

Federal Construction Professionals QCM, Superintendent, PM.Elite Recruiting and Consulting Services, SDVOSB, is building an ongoing pipeline of experienced Federal construction professionals for upcoming NAVFAC, USACE, and Guard projects nationwide.If you have worked on military bases or federal ve

Our client is a Nationwide and Multi-Regional Top Workplace of 2023 and also an Employee-Owned Company! Their foundation is built around construction done right by people who care, in partnership with people we care about! Please note this position is based out of Norwalk, CA.As a Superintendent, yo

Construction Superintendent - Low Voltage Technology.We are looking for an experienced Low Voltage Construction Superintendent (CS) to join our team.The CS will ensure projects are completed safely, on time, within budget, and to our quality standards.Key responsibilities include safety compliance,