Trabajos Construction & Trades en West New York, New Jersey - Page 8Crear alertas

The New York City Department of Investigation (DOI) is one of the oldest law enforcement agencies in the country; its mission is to combat municipal corruption. DOI serves the people of New York City by acting as an independent and nonpartisan watchdog for New York City government, City agencies, and City employees, vendors with City contracts, individuals and entities that receive City funds. The Department of Investigation (DOI) is seeking a highly skilled Assistant Inspector General to join Squad 3 which oversees several key New York City agencies, including the Department of Housing Preservation and Development, the Department of Buildings, the Housing Development Corporation, the Department of Small Business Services, the Department of City Planning, the Business Integrity Commission, the Landmarks Preservation Commission, and the Board of Standards and Appeals. The Assistant Inspector General will conduct and supervise complex and long-term investigations of fraud and corruption involving the construction and affordable housing industries and Squad 3's portfolio of agencies, using all types of investigative tools, including subpoenas and interviews. The Assistant Inspector General will use his or her experience and knowledge of the agencies to serve as a resource for colleagues, providing guidance and assistance as needed. The Assistant Inspector General is expected to demonstrate ingenuity, resourcefulness, creativity, independence, and analytical thinking in their case work, and to develop the same in junior investigators. The Assistant Inspector General must meet the highest standards of professionalism, discretion, and integrity. Key Responsibilities: • Lead and supervise investigations into suspected fraud, corruption, and misconduct involving City employees, developers, contractors, vendors, and public benefit recipients., • Examine a wide range of records and data --including construction and development filings, housing applications, financial statements, and agency records and policies --to detect vulnerabilities and irregularities., • Plan and execute investigative operations, including interviews of witnesses and subjects, surveillance activities, subpoenas, and fieldwork across New York City., • Collaborate closely with DOI attorneys, auditors, analysts, and investigators, as well as prosecutors and other law enforcement agencies, in advancing investigations and sharing findings., • Draft clear investigative reports and written referrals, • Propose operational and procedural reforms to strengthen agency controls and reduce risk., • Maintain meticulous case documentation in compliance with DOI standards and uphold confidentiality and integrity in all investigative activities. If selected, the candidate will be fingerprinted and undergo a background investigation. In addition, because the position has a law enforcement and/or investigative function, the candidate's consumer credit history will be reviewed during the background investigation, as permitted by NYC Administrative Code 8-107(24)(b)(2)(A). SPECIAL INVESTIGATOR - 31130 1. A four-year high school diploma or its educational equivalent approved by a State's Department of Education or a recognized accrediting organization and four years of satisfactory full-time experience in an industrial or governmental agency in the field of investigation, auditing, law enforcement, security, inspections, or in a major operational area of the agency in which the appointment is to be made; or, 2. A baccalaureate degree from an accredited college or university; or, 3. Education and/or experience equivalent to "1" or "2" above. • A minimum of four years of experience conducting complex investigations (preferably involving procurement, contracting, and/or other white-collar related criminal offenses). At least two years of experience at a law enforcement agency, investigative agency, or investigations and audit firm serving in an investigative role (agent, detective, or equivalent investigative position) required. - Demonstrated writing ability, including to prepare detailed written reports and memoranda, and experience editing written word product to a high standard. Candidates should be prepared to provide a writing sample. - Demonstrated ability to function independently, with minimal supervision, to conduct investigations and balance an active caseload of multiple cases on a short timeline. Possess excellent organizational skills and proven ability to manage time efficiently in a fast-paced environment. - Ability to initiate and drive projects to completion. - Experience working with federal, state, and city prosecutors on complex investigations. - Strong interpersonal, written, and analytical skills. - Proficiency in Microsoft Office, public records databases, and open-source intelligence tools. - Ability to work well with all levels of staff and management. - Demonstrated ethics and sound judgment. - Experience in construction and development and/or affordable housing is a plus. As a prospective employee of the City of New York, you may be eligible for federal loan forgiveness programs and state repayment assistance programs. For more information, please visit the U.S. Department of Education's website at . New York City residency is generally required within 90 days of appointment. However, City Employees in certain titles who have worked for the City for 2 continuous years may also be eligible to reside in Nassau, Suffolk, Putnam, Westchester, Rockland, or Orange County. To determine if the residency requirement applies to you, please discuss with the agency representative at the time of interview. The City of New York is an inclusive equal opportunity employer committed to recruiting and retaining a diverse workforce and providing a work environment that is free from discrimination and harassment based upon any legally protected status or protected characteristic, including but not limited to an individual's sex, race, color, ethnicity, national origin, age, religion, disability, sexual orientation, veteran status, gender identity, or pregnancy.

Location(s): Kearny, NJ, US, 07032-4398 Function: Manufacturing Audience: Hourly Work Arrangement: On Site Requisition ID: 68834 Hiring Manager: Hany Azmy HR Rep: Patricia Oltar SUMMARY The purpose of the Electrical Technician is assist in the installation and repair electrical systems, apparatus, and electrical and electronic components of industrial machinery and equipment. This role also provides maintenance repairs to industrial machinery as needed to keep a continuous manufacturing process supported. Uses man lifts, forklifts, hoists and all electrical testing equipment required. Must work safely and follow all documented and "common sense" safety policies and procedures. This individual is expected to perform as a professional, highly skilled and exceptionally competent maintenance person. They must be able to analyze causes of breakdowns and carry out corrective measures. Principal Duties and Responsibilities: • Notify your supervisor immediately of any accident, near miss or on- the -job injury when it occurs no matter how insignificant it may seem., • Take personal ownership to work safely each and every day and hold other team members to the same high standards of safety, • Basic industrial electrical code. (local compliance issues), • Capability to read schematics and P&ID drawings, • Fusing, thermal overload protection, wire sizing, motor theory, etc., • AC, DC and Servo drive system (basics), • Be able to safely conduct motor control and power circuit troubleshooting. Understand fuse sizing, take motor amp readings, understand basic DC motor control, etc., • Ability to fully troubleshoot drives-DC and AC variable frequency, and communicate technically with outside technical support when needed. Ability to fully understand and properly tune the various control loops in the plant including IM/APC systems and weight control equipment. Fully competent in electrical noise avoidance-grounding, shielding, etc. (at least 2 persons, each plant), • Burner system understanding, troubleshooting and properly tuning (at least 2 persons, each plant), • Basic Skills, pneumatics, hydraulics, mechanical gear, • When appropriate or when plant decides lead efforts for electrical root cause analyzes Complies with good housekeeping practices on the job and insures work areas are clean and picked up after each job completion. Helps with electrical training of other maintenance personnel. Follows all environmental compliance polices & programs. Works as instructed with outside contractors. • Be a lead person for all electrical projects and installation that are maintenance responsibility., • Comply with all plant rules, • Comply with safety regulations and maintain a clean and orderly work area, • All other duties as assigned or needed The employee should hold the following abilities: • Basic Computer Skills, • Electrical, • PLC, • Hydraulic, • Pneumatics, • Basic Blueprint & Schematic reading, • Basic Welding, • Able to think under pressure and make quick decisions, • Ability to work well in a team or alone, • Able to communicate in English The employee must be able to: The employee should have the following: • High School Diploma or GED Equivalent, • High school or GED Preferably seven- (7) year's experience in related maintenance trade or occupation that involved electrical and electronic components in a manufacturing environment. Must have the ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Must have the ability to interpret instructions furnished in written, oral, diagram or schedule form. Must be able to work independently with minimal direct supervision with drive toward accomplishment, and to produce high quality work. ESSENTIAL PHYSICAL REQUIREMENTS/WORK ENVIRONMENT The employee should possess the ability to: • Able to do repetitive hand, arm, leg movements for several hours, • Able to climb on and off of fork truck, • Ability to stand for 10 - 12 hours straight, • Able to climb and descend stairs for up to 12 hours continuously, • Lift and push and pull 50lbs. More than 100 times per day, • Must be able to squat, bend at the waist and knees freely, • Exposure to temperature extremes, • Exposure to sounds or noise levels that maybe uncomfortable, • Handle, control or feel objects, tools or control--continously This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, and abilities. This document does not create an employment contract, implied or otherwise, other than an "at will" relationship. About Owens Corning Owens Corning is a residential and commercial building products leader committed to building a sustainable future through material innovation. Our products provide durable, sustainable, energy-efficient solutions that leverage our unique capabilities and market-leading positions to help our customers win and grow. We are global in scope, human in scale with more than 25,000 employees in 31 countries dedicated to generating value for our customers and shareholders and making a difference in the communities where we work and live. Founded in 1938 and based in Toledo, Ohio, USA, Owens Corning posted 2024 sales of $11.0 billion. For more information, visit . Owens Corning is an equal opportunity employer. Except in limited circumstances such as formal apprenticeship programs, Owens Corning does not employ anyone under the age of 18.

Build your Career with an Industry Leader As the global leader of premium labels, MCC helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing experience, MCC is focused on the future by developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. The Equipment Engineer Technician will support the installation, relocation, repair and maintenance for primary printing/converting equipment across the business unit. The qualified candidate would have capabilities in both mechanical and electrical equipment maintenance. Responsibilities: • Travel to all 29 company sites to conduct services. Travel Monday, work 8 straight days, travel home on 10th day, off Thursday - Sunday, off to the next job on Monday., • Remove and relocate machinery as needed., • Work with local plant associates to improve local skills and capabilities., • Interact with vendors and internal associates to order materials, parts and arrange services., • Participate in special projects and perform other duties as assigned., • Operate a forklift as needed. Qualifications: • 3-5 years of relevant experience in machine maintenance & field service required., • Experience working on printing & finishing machinery, • Forklift Experience, preferred., • Must be able to lift 50 lbs, • Must be able to be on your feet for prolonged periods of time, • Job requires standing, stooping, bending over, and kneeling Other considerations: • Air travel would be required as needed for longer distances, • Employees would be expected to supply their own hand tools, specialty tools will be supplied, • MCC would cover shipping cost to transport tools from job to job, • Travel requirements- expectations would be that 10 out of 14 days will be travel, home every other Thursday-Sunday For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ___. If you need assistance or an accommodation in applying, please contact our Human Resources Department at ___. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

The Fleet Technology Technician will provide the first line of support of all onboard truck technology and related hardware.

Job Description HVAC & Refrigeration Service Technician Bilingual (English/Spanish) Preferred We are currently seeking an experienced A/C, Heating, and Refrigeration Service Technician to join our team. The ideal candidate will have hands-on experience servicing HVAC and refrigeration systems and be comfortable working independently in the field. Responsibilities: • Service, repair, and maintain air conditioning, heating, and refrigeration systems, • Diagnose issues and perform system troubleshooting, • Install and replace HVAC and refrigeration equipment as needed, • Perform routine preventative maintenance, • Respond to emergency service calls in a timely manner, • Previous experience in HVAC and refrigeration service, • Strong knowledge of A/C, heating systems, and refrigeration units, • Ability to read and interpret wiring diagrams and schematics, • Strong troubleshooting and problem-solving skills, • Ability to handle physical workload and work in various conditions, • Valid driver’s license Bilingüe (Inglés/Español) Preferido Actualmente estamos buscando un Técnico de Servicio en Aire Acondicionado, Calefacción y Refrigeración con experiencia para unirse a nuestro equipo. El candidato ideal debe tener experiencia práctica trabajando con sistemas HVAC y de refrigeración, y sentirse cómodo trabajando de manera independiente en el campo. Responsabilidades: • Dar servicio, reparar y mantener sistemas de aire acondicionado, calefacción y refrigeración, • Diagnosticar fallas y realizar solución de problemas, • Instalar y reemplazar equipos HVAC y de refrigeración según sea necesario, • Realizar mantenimiento preventivo de rutina, • Responder a llamadas de servicio de emergencia de manera oportuna, • Experiencia previa en servicio de HVAC y refrigeración, • Conocimiento sólido de sistemas de A/C, calefacción y refrigeración, • Capacidad para leer e interpretar diagramas eléctricos, • Habilidades de resolución de problemas y pensamiento crítico, • Capacidad para realizar trabajo físico y trabajar en diferentes condiciones, • Licencia de conducir válida, • Bilingüe (Inglés/Español) preferido Company DescriptionEscobar Refrigeration is a growing commercial HVAC and refrigeration contractor providing installation, maintenance, and repair services for heating, air conditioning, and refrigeration systems. We are committed to delivering high-quality work and dependable service to our clients while building a strong and reliable team.Escobar Refrigeration is a growing commercial HVAC and refrigeration contractor providing installation, maintenance, and repair services for heating, air conditioning, and refrigeration systems. We are committed to delivering high-quality work and dependable service to our clients while building a strong and reliable team.

Job Description Appliance Repair Technician - Experience Required Appliance Man NJ has an opening for an experienced Appliance Repair Technician. Due to steady growth, we are currently seeking individuals who share our company core values. These core values are honesty, integrity, professionalism among others. We offer incentive based pay, company vehicle, company uniforms and paid vacation. Appliance Repair Technician Responsibilities: • Install home appliances/equipment, • Accurately diagnose and repair appliances/equipment in the customer's homeProvide cost estimates for repairs/installations and collect payment and/or payment information from customers for work performed, • Ensure the efficient use of materials and keep company vehicle and equipment properly serviced, • Complete all quotes/invoices daily, • Perform other duties as needed which may include cross-training in related positions, • Maintain a safe work environment by following codes and standardsKeeps supplies ready by inventorying stock, • Updates job knowledge by participating in educational opportunities; reading technical publications., • Enhances organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments, • Must be at least 18 years of age, • High school graduate or equivalent, • Valid Driver's License with good standing, • At least 2yrs experience in the residential and/ or commercial appliance repair industry, • Technical Understanding, Attention to Detail, Dependability, Job Knowledge, Documentation Skills, Dealing with Complexity, Decision Making, Problem Solving, Verbal Communication, Written Communication, • Proficiency to navigate tablet based technology, • The ability to safely lift up to 50 pounds on a repetitive basis, dexterity and the physical ability to perform strenuous work under varied circumstances, • Technician to provide personal work (hand) tools Pay may depend on skills and/or qualifications • Commission Based For immediate consideration please e-mail resume, in MSWord or PDF format, to the contact information below: Appliance Man NJ - Jersey City, NJ Call: (201) 293-0746 Company DescriptionWhen one loves what one does, it never feels like a job. It a beautiful thing making someone happy doing what one enjoys. It helps that our culture is all about learning and collaboration and if that isn’t enough, there’s competitive compensation. Give us a call today.When one loves what one does, it never feels like a job. It a beautiful thing making someone happy doing what one enjoys. It helps that our culture is all about learning and collaboration and if that isn’t enough, there’s competitive compensation. Give us a call today.

Job Description Position Summary The Field Service Technician position is a valuable front-line position in our organization, and is responsible for ongoing service delivery, urgent service response calls, and installing new security/alarm systems for our clients in New York City and the surrounding area. Your Opportunity This is an excellent opportunity to join a stable, well-established company with an impeccable reputation in the security industry. This Position Requires: · Experience supporting electronic security systems. · Experience developing and maintaining system applications and network configurations. · Alarm, access control and CCTV installation and service experience including experience working with various alarm panels, including DMP and Radionics, Software House · An electronics technician degree, military technical school or equivalent experience. · Solid work record (at least one year is preferable). · A passion for delivering excellent customer service. · An ability to work and communicate confidently at all organization levels. · An ability to work independently and recognize when to access available assistance and expertise. · Valid NY driver’s license and clean driving record. Responsibilities: · Install and service alarm systems · Network wiring at customer site · Preventative maintenance inspections · Implement hardware and software upgrades · Respond to customer problems and offer solutions. · Resolve any software or hardware problems at customer site. · Instruct engineer users on hardware capabilities. Company DescriptionSpecializes in designing and implementing tailored security systems for museums, financial institutions and commercial clients. .Specializes in designing and implementing tailored security systems for museums, financial institutions and commercial clients.\r\n\r\n.

Job Description HVAC Technician – Job Description & Responsibilities We are seeking a reliable and skilled HVAC Technician to install, service, and maintain heating, ventilation, and air conditioning systems for residential and light commercial customers. The ideal candidate is mechanically inclined, customer-focused, and able to work independently as well as part of a team. Responsibilities • Install, troubleshoot, repair, and maintain HVAC systems including furnaces, hydronic boilers, air conditioners, heat pumps, and ductless mini-splits, • Perform preventative maintenance and system inspections, • Diagnose mechanical and electrical issues and recommend proper solutions, • Read and interpret wiring diagrams, blueprints, and technical manuals, • Test HVAC systems for proper operation, airflow, and efficiency, • Communicate clearly with customers regarding system issues, repairs, and maintenance options, • Maintain accurate service records and work orders, • Follow all safety procedures and local building codes, • Maintain tools, equipment, and company vehicle in good condition, • 5+ years HVAC experience preferred (or equivalent training/apprenticeship), • Valid driver’s license and clean driving record, • Strong electrical and mechanical troubleshooting skills, • Ability to lift up to 50 lbs and work in confined spaces, • Ductless/VRF experience, • Competitive pay based on experience, • Overtime opportunities, • Paid training and continuing education, • Company vehicle, tools, and uniforms, • Paid time off and holidays Company DescriptionWe are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.We are a growing Plumbing & HVAC company seeking skilled, dependable technicians to join our team. We offer competitive pay, steady work, and opportunities for advancement in a supportive work environment.

Job Description We are seeking an on the road Mechanic to join our team! The service area includes the 5 boroughs. Qualifications: • Good interpersonal and social skills, • Ability to handle physical workload, • Mechanically inclined, • Strong organizational and multi-tasking skills, • Computer savvy and knowledgeable in basic computer programs, • Diesel experience or schooling is preferred, • Machinery background is a plus, • Safely operate a service van, • Load and unload cargo, • Diagnose and repair machinery, • Properly track and document activity log, • Report any issues or incidents to service manager, • Health, vision and dental benefits, • 401K, • Life insurance policy, • Paid holidays and PTO/vacation, • Lots of potential for growth in our expanding companyCompany DescriptionComplete Equipment provides rentals of construction lifts and related equipment throughout the Tri-state area. Using our extensive resources and knowledge in the field, we have earned an impressive reputation within the construction industry as one of the best construction equipment rental companies in the New York and New Jersey regions. We offer a wide array of heavy equipment and construction lift rental solutions and options that can successfully accommodate any job or project, no matter the size. At Complete Equipment, we pride ourselves on the expert, personal, and prompt rental solutions we provide. Our integrity, reliability and availability, along with our competitive pricing, results in optimal customer satisfaction time and again. Simply put, we offer the best rental solutions to suit your needs. Complete Equipment is the one construction equipment rental company you need. We mean it when we say, “We’re here for you!”Complete Equipment provides rentals of construction lifts and related equipment throughout the Tri-state area. Using our extensive resources and knowledge in the field, we have earned an impressive reputation within the construction industry as one of the best construction equipment rental companies in the New York and New Jersey regions. We offer a wide array of heavy equipment and construction lift rental solutions and options that can successfully accommodate any job or project, no matter the size.\r\n\r\nAt Complete Equipment, we pride ourselves on the expert, personal, and prompt rental solutions we provide. Our integrity, reliability and availability, along with our competitive pricing, results in optimal customer satisfaction time and again. Simply put, we offer the best rental solutions to suit your needs. Complete Equipment is the one construction equipment rental company you need.\r\n\r\nWe mean it when we say, “We’re here for you!”

Job Description Job Summary Commercial HVAC Company seeking skilled Installation Technicians and/or Apprentices to join our team. The ideal candidate will be responsible for the installation, maintenance, and troubleshooting of various systems. This role requires a strong understanding of system design, mechanical knowledge, and the ability to read schematics. The Installation Technician will work closely with clients to ensure that installations meet their specifications and operate efficiently. Boiler and Piping knowledge a plus! Responsibilities • Conduct thorough system design assessments to determine the best installation practices., • Read and interpret schematics and blueprints to execute installations accurately., • Utilize power tools and equipment safely while adhering to industry standards., • Perform routine maintenance checks on installed systems to ensure optimal performance., • Troubleshoot issues related to various systems., • Collaborate with team members to complete projects on time and within specifications., • Proven experience in installation or a related field is preferred., • Strong mechanical knowledge with the ability to work with various power tools., • Familiarity with computer networking principles and practices., • Ability to telecommunicate effectively with clients and team members., • Excellent problem-solving skills and attention to detail. Job Types: Full-time, Part-time, Contract Pay: $20.00 - $45.00 per hour Schedule: • 10 hour shift, • 8 hour shift, • Rotating shift, • Staten Island, NY 10309: Relocate before starting work (Required) Work Location: In person

Job Description We are looking for an HVAC Service Technician to join our team! You will install, service, and repair heating and air conditioning systems. Responsibilities: • Install new heating, ventilation, and air conditioning systems, • Inspect and perform equipment repairs and replacements, • Perform routine preventative maintenance, • Respond to emergency maintenance requests, • Previous experience in HVAC or other related fields, • Familiarity with HVAC wiring diagrams, • Ability to handle physical workload, • Strong problem solving and critical thinking skillsCompany DescriptionHVAC Company in business for over 32 yearsHVAC Company in business for over 32 years

Job Description We are looking for an experienced HVAC Mechanic to join our team! You will install, service, and repair heating and air conditioning systems as well as refrigeration equipment. Responsibilities: • Install new heating, ventilation, and air conditioning systems, • Inspect and perform equipment repairs and replacements, • Perform routine preventative maintenance, • Respond to emergency maintenance requests, • Previous experience in HVAC or other related fields, • Familiarity with HVAC wiring diagrams, • Ability to handle physical workload, • Strong problem solving and critical thinking skills

Job Description Now Hiring: Appliance Technician |Carlstadt, NJ Start your career with a company that’s been serving the food service industry for over 85 years. Auto-Chlor System is hiring a Appliance Technician to join our Carlstadt team. This is a hands-on position mechanical position working onsite at our facility. About the Role After paid training you will be rebuilding and refurbishing our commercial dishwasher machines. Any dishwashers that are uninstalled at a company site will be brought back to the warehouse for you to provide maintenance on. You will be tearing down equipment, determining reusable parts, and performing quality testing to ensure equipment is functioning correctly. When not engaged in this task, the individual will also perform warehouse organizational duties. You would also participate in our on-call rotation to provide our customers with excellent service and solutions. What You’ll Get • $22-$23/hour, with a typical 45+ hour workweek including overtime and on-call pay, • Anticipated annual earnings: $65,000-$75,0000, • Consistent schedule: Monday–Friday, 7:30 AM–4:30 PM, • On-call rotation:1 day a week and 1 weekend every period, • Company-provided resources: Vehicle during business hours, phone, tools, uniforms, and paid training, • Vacation: Earn up to 80 hours (2 weeks) in your first year, accrued each pay period, • Paid Sick Time: Up to 40 hours per year, • Paid Holidays: 6 company-observed holidays + 1 floating holiday

Job DescriptionPIRTEK, the nation’s leading provider for on-site hydraulic and industrial hose replacement is hiring for the position of Hose Installation Technician. Job Description: PIRTEK is looking to hire a Hose Installation Technician to service, assemble and install hoses for a diverse customer’s base such as manufacturing, construction, and rental companies, to name a few. We are looking for applicants with excellent communication and strong customer service skills. If you are mechanically inclined, enjoy meeting and working with customers, PIRTEK could be an excellent career path. As a PIRTEK Hose Installation Technician, you will be operating out of a PIRTEK Service & Supply Center in a purpose-built mobile hose workshop/van and be carrying out service calls in the local area. This provides the opportunity to develop relationships with new and existing customers. Successful candidates will be fully trained to operate a purpose-built PIRTEK service truck fitted with specialized equipment designed to fabricate flexible hose assemblies on site. Responsibilities: • Service, assemble and install hoses for a diverse customer’s base, • Carry out service calls in the local area, • Develop relationships with new and existing customersQualifications:, • High School Diploma or GED, • Mechanically Inclined, • Good Communication Skills, • Positive attitude, • Self-motivated, • Clean driving recordBenefits:, • Competitive salary (Depending on experience), • Certified training, • Company vehicle, • Career advancement within

Job Description Seeking a knowledgeable and experienced Cellphone repair technician. The ideal candidate MUST SPEAK ENGLISH WELL, MUST HAVE EXPERIENCE FIXING PHONES. You must be able to diagnose and repair phones, tablets and laptops efficiently, and have great customer service skills.

Job Description • Candidate must have the experience & ability to do general construction work, including but not limited to painting, drywall, flooring, snow removal, and any other miscellaneous repairs., • Must have a wide range of skills and experience on Maintenance and Repairs of Offices & Warehouse Facilities; Install/repair/replace warehouse racks; (Any additional interior & exterior maintenance/repairs work)., • Should have experience with using equipment, power/electric tools, hand tools., • Should have a valid driver’s license and own transportation for commuting purposes. (Won’t be diving a Company’s vehicle)., • Will be very helpful as well if they have experience and are certified to drive a Sit-down Forklift and Electric Pallet Jack. This will be a plus but not required

Job Description Mechanical Contractor specializing in HVAC construction, installation and maintenance for the NY Tri-State area is currently seeking a qualified candidate to fill the role of a HVAC Service Technician with 5+ years of experience in the NYC Metro Area. We are a Local 638B Union Shop. All wages are based on the Metal Trades Branch Wage Rates. HVAC Technician Responsibilities: • Installing, maintaining and repairing HVAC systems and equipment to meet specifications, • Identifying maintenance risks on equipment, • Testing and diagnosing electrical and mechanical faults for HVAC systems, • Cleaning, adjusting, and repairing systems, and performing warranty services, • Conducting tests and inspections of products, services, or processes to evaluate quality or performance, • Determining causes of operating errors and deciding how to fix the problem, • Performing emergency repairs promptly and efficiently, • Watching gauges, dials, or other indicators to make sure a machine is working properly, • Providing technical direction to clients, • Inputting daily logs and records of all maintenance functions in the system, • Ensuring compliance with appliance standards and with the Occupational Health and Safety Act, • Complying with service standards, work instructions and customers' requirements, • Valid Driver License (Motor Vehicle Report will be run to establish if candidate can operate a company vehicle), • Valid OSHA 30 & SST, Fire watch, Certificate of fitness for torch operation, EPA 608 certification, • VRF experience and ability to use a laptop and VRF service tools is a plus, • Understanding of advanced principles of air conditioning, refrigeration and heating systems, • Excellent written, verbal and interpersonal skills., • Proficient in reading and understanding of electrical schematics and work plans. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, creed, color, national origin, sexual orientation, age, sex, predisposing genetic characteristics, marital status, domestic violence victim status, disability or military status. Company DescriptionFor nearly 60 years, Henick-Lane has been the source clients have relied on for the finest in mechanical construction and service. During a time of increasingly complex energy demands and standards, our experienced management team and skilled workforce proudly maintain an ongoing and continually expanding reputation for success. Our philosophy is to earn and build strong relationships with our clients, treating each client as a member of the Henick-Lane family. We serve clients throughout the industrial and commercial marketplaces, striving for unparalleled customer service in all aspects of our business.For nearly 60 years, Henick-Lane has been the source clients have relied on for the finest in mechanical construction and service. During a time of increasingly complex energy demands and standards, our experienced management team and skilled workforce proudly maintain an ongoing and continually expanding reputation for success.\r\n\r\nOur philosophy is to earn and build strong relationships with our clients, treating each client as a member of the Henick-Lane family. We serve clients throughout the industrial and commercial marketplaces, striving for unparalleled customer service in all aspects of our business.

Job Description HVAC Service Technician Manhattan, NY Compensation: $40-55/hour Top HVAC company is seeking skilled and reliable HVAC Service Technicians to join our team in the New York City area. In this role, you’ll be responsible for installing, maintaining, and repairing HVAC systems for both residential and commercial clients. The ideal candidate will bring strong technical expertise, excellent troubleshooting skills, and a customer-first mindset. You’ll play a key role in ensuring the safe, efficient, and reliable operation of heating, cooling, and ventilation systems. What You’ll Do • Install, maintain, and repair HVAC systems across residential and commercial sites, • Perform preventative maintenance, inspections, and part replacements as needed, • Diagnose and troubleshoot electrical and mechanical issues in HVAC systems, • Provide accurate, timely, and effective repair solutions, • Communicate clearly with clients about system issues, repairs, and maintenance tips, • Maintain accurate service reports, work orders, and parts documentation, • 5+ years of hands-on HVAC service and repair experience (required), • Valid HVAC certification and/or license (required), • EPA Certification for refrigerant handling (required), • Strong knowledge of HVAC systems, diagnostics, and industry tools, • Excellent problem-solving skills with attention to detail, • Strong customer service and communication abilities, • Valid driver’s license with a clean driving record, • High school diploma or equivalent; technical training or certifications preferred Company DescriptionThe Bachrach Group (TBG) is a New York-based staffing and recruiting agency founded in 1974 by Richard Bachrach. The agency specializes in facilitating placements for professionals across various industries on a nationwide scale. TBG's overarching mission is to deliver tailored staffing solutions to its client base while simultaneously providing job seekers with career prospects. The company relies on its team of recruiters, who leverage their industry knowledge and networks to connect employers with top talent. TBG provides a comprehensive range of staffing services, including direct hire, temporary staffing, Recruitment Process Outsourcing (RPO), and contract staffing. The agency has consistently achieved notable rankings in Crain's lists, ranking as the largest search firm in NYC since 2020.The Bachrach Group (TBG) is a New York-based staffing and recruiting agency founded in 1974 by Richard Bachrach. The agency specializes in facilitating placements for professionals across various industries on a nationwide scale. TBG's overarching mission is to deliver tailored staffing solutions to its client base while simultaneously providing job seekers with career prospects. The company relies on its team of recruiters, who leverage their industry knowledge and networks to connect employers with top talent. TBG provides a comprehensive range of staffing services, including direct hire, temporary staffing, Recruitment Process Outsourcing (RPO), and contract staffing. The agency has consistently achieved notable rankings in Crain's lists, ranking as the largest search firm in NYC since 2020.

Job Description Commercial Gas/Oil Burner Service Mechanic – Immediate Opening We have partnered with a well-established, family-owned commercial boiler services company that has proudly served the industry for over 80 years. Known for exceptional customer service and technical expertise, they specialize in commercial boiler repair, maintenance, inspections, combustion analysis, welding, fabrication, and water treatment services. Due to continued growth, they are hiring an experienced Commercial Gas/Oil Burner Service Mechanic to join their team. Why Join This Team? • Company service vehicle – dispatched from home, • Competitive pay, • Health insurance, • 401(k), • Pension plan, • Paid vacation, sick time, and holidays, • Company-provided tools, • Ongoing technical training and certification support, • Service, troubleshoot, and repair commercial and industrial gas/oil burners and boiler systems, • Perform combustion analysis and system adjustments to maximize efficiency and ensure emissions compliance, • Diagnose electrical and mechanical issues involving burner controls and boiler systems, • Conduct preventative maintenance and routine inspections on commercial heating systems, • Replace and calibrate components including fuel pumps, nozzles, motors, ignition transformers, and control panels, • Read and interpret wiring diagrams, schematics, blueprints, and technical manuals, • Complete service documentation and maintenance reports accurately, • Assist with startup and commissioning of newly installed burner systems, • Participate in an on-call rotation for emergency service response, • 3+ years of experience servicing commercial gas/oil burner systems, • Strong knowledge of combustion theory, burner controls, and boiler operations, • Experience working with steam and hydronic boiler systems, • Familiarity with BAS (Building Automation Systems) integration and controls, • Experience with emissions testing and reporting procedures, • Valid Gas/Oil Burner Technician license/certification (as required by local/state regulations), • OSHA 30 certification preferred If you’re an experienced Burner Service Mechanic looking for a stable company, strong benefits, ongoing training, and the opportunity to work with a respected industry leader, we want to hear from you. Take the next step in your Boiler Services career today!

Job Description Seeking a temporary handyman, with a possibility of leading to permanent part-time or full-time position, for a management company with 15 residential buildings Hours will vary between 20-40 hours per week, depending on available work Individual must be able to: patch, tape, plaster, sand, and paint The hourly rate starts at $30 per hour

Job Description Job description Service & Maintenance Corp. 6 WARREN DRIVE, UNIT A. VERNON, NJ 07462 HAVC/R Job Description: Mechanical Services Contractor located in New Jersey is seeking Service Technicians with 5+ years of experience with commercial refrigeration and HVAC systems. Positions open for technicians servicing New York, New Jersey and Southern Connecticut metro area. Primary Job Responsibilities: Maintain, repair and troubleshoot HVAC/R equipment to include but not limited to packaged units, split systems, Walk-in boxes and ice makers a plus. Install, inspect, diagnose and correct problems in HVACR systems Inspect systems and their components (e.g. air conditioning, heating and refrigeration units, etc.) to ensure safety and identify necessary repairs and provide an ongoing program of preventive maintenance Repair or replace defective equipment, components, or wiring on heating/air-conditioning/refrigeration systems Diagnose problems and/or failures in heating/air conditioning/refrigeration systems to identify equipment and, or systems repair and replacement needs Job Requirements: Minimum 5 years’ experience in HVAC Refrigeration work Commercial industry HVAC Refrigeration background Comply with all applicable standards, policies, and procedures, including safety procedures and the maintenance of a clean work area. Applicants must be proficient with the use of tablets and smart phones EPA Certification (universal and 608) – and advanced understanding of electricity, wiring, and control circuits (all equipment), to perform maintenance and repairs Communicate thoroughly and effectively with dispatch teams and account managers Maintain and be accountable for material and supply requisition as needed for each job, including online purchase order execution Ability to safely lift 50 pounds and climb ladders Customer service skills with the ability to build strong relationships with internal and external customers Advanced troubleshooting ability and mechanical skills F60 FDNY Torch Ops a plus G60 Torch Flammable Gases a plus High school diploma or GED Valid and clean driver’s license Union training or NATE certifications is a plus Off street company vehicle parking a must What We Offer: Competitive hourly salary, including overtime and stand-by Weekly pay with direct deposit Company supplied vehicle with gas card, iPhone & iPad Paid vacation and holidays Union benefits and a team environment Job Type: Full-time Job Type: Full-time Pay: $60,000.00 - $125,000.00 per year COVID-19 considerations: All employees are issued proper PPE equipment to perform the job Company DescriptionService & Maintenance Corp. (SAMCO) is a second generation family owned company serving the NY, NJ and CT metro area. We service commercial HVAC/R, from small business to major S&P 500 & 600 companies. Our technicians are part of our team and we work for commercial restaurants, retail stores, care facilities and data centers as well as other opportunities. Please reach out to SAMCO if you have the experience we seek and join our growing team.Service & Maintenance Corp. (SAMCO) is a second generation family owned company serving the NY, NJ and CT metro area. We service commercial HVAC/R, from small business to major S&P 500 & 600 companies. Our technicians are part of our team and we work for commercial restaurants, retail stores, care facilities and data centers as well as other opportunities. Please reach out to SAMCO if you have the experience we seek and join our growing team.

Job Description Small engine mechanic for a growing rental fleet. Job experience is preferred but not a must. Must be able to provide their own tools, and able to be at work on time from 7:00 am to 3:30 pm Monday through Friday.

Job DescriptionNortheastern Appliance Service Experienced Appliance Servicer - Now Hiring Repair Technicians to Service Sub-Zero Appliances Northeastern Appliance Service is New York’s Premier Service Partner for Sub-Zero, and we’re growing fast. We service much of the Hudson Valley, Bronx, Brooklyn, and western Connecticut and we are expanding our team of factory-certified technicians. Now hiring experienced appliance repair technicians to service Sub-Zero appliances who are enteric career-seekers committed to mastering a high-paying and job-secure trade. If you are a trained and skilled appliance repair technician with outstanding customer service skills, we invite you to contact us about full-time employment. Northeastern Appliance Service is an established service company with an exclusive contract with the Sub-Zero, Wolf, and Cove group. We offer excellent salaries and full benefits to our Factory Certified Technicians. JOB REQUIREMENTS Applicants must: • Be knowledgeable about high-end refrigeration, cooking, dishwashing and laundry appliances and be committed to building a career in the trade - experience working with Sub-Zero, Wolf and Cove appliances is a plus., • Have a strong mechanical and/or electrical aptitude, • Have a strong mechanical and/or electrical background, • Be physically able to negotiate around and through heavy refrigerators and ranges, • Have a “customer first” attitude and enjoy the customer service side of the businessNortheastern Appliance Service is an established company, and we care about our employees and customers. We promote professional growth with career paths and development plans so you can have a work/life balance. POSITION DETAILS AND BENEFITS: • Full-time employee position, not subcontracted, • Excellent pay, • Full health benefits, paid vacation, holiday, and sick leave, • Uniform, truck, heavy equipment, etc. provided, • Paid training, • Access to technical support, • Bonus opportunitiesQUALIFICATIONS AND SKILLS Candidates must: • Possess a “can do” attitude and professional appearance, • Want to work in an environment that recognizes and rewards potential, • Enjoy the customer service side of the job, • Have a strong work ethic and be driven to deliver exceptional service, • Possess strong interpersonal and communication skills, • Be tech-savvy, • Be detail-oriented, able to follow specific process steps to ensure quality workmanship and write accurate service notes, • Be a self-starter who is always willing to become an even better technician, • Be able to lift 60 lbs, push 100 lbs, and pull 50 lbsIf you are committed to customer service and interested in a career as a high-end appliance repair technician, we want to meet you. We pledge to our customers the finest in service and repair to protect their investment in these luxury appliances. Join our team and help make our pledge a reality. Job Type: Full-time $54,000 - $120,000 annually, with bonus and overtime potential Schedule: Monday to Friday, some Saturdays during the summer Work remotely: No If you require alternative methods of application or screening, you must approach the employer directly to request this as Indeed is not responsible for the employer's application process. Work Location: • One locationWork Remotely, • NoJob Type: Full-time Benefits: • 401(k), • Health insurance, • Paid time offExperience:, • Appliance repair: 2 years (Required)Language:, • English (Required)License/Certification:, • EPA Certification (Required), • Driver's License (Required)Ability to Commute:, • Brooklyn, NY (Preferred)Work Location: On the road

Job Description Handyman Kraus Management is currently seeking an experienced Handyman for residential buildings in the Bronx. Position summary: Perform repair work in apartments, building interior and exterior. Responsibilities · Carpentry: Replace/repair cabinets, countertops, closets, etc. · Vacancy Preparation: Performs repair work required to restore apt. for new tenant · Electrical: Performs electrical repairs in apt and common areas · Plumbing/Boiler: repair/replace washers, leaks, minor pipe replacements, etc. · Painting/Plastering: performs throughout the apartments and common areas · Doors/Locks: Repair/Replace building entrance and apt. doors and locks Job Type · Full Time · Union, 32 BJ Qualifications · Experience of 5 years or more working as a handyman or in building/apt construction · Experience and permits, where required, in boiler, plumbing, electrical, and general maintenance · Must have own tools · Must have valid NY driver’s license and vehicle · Must be a team player with ability to take direction and multi task · Polite with experience working in a customer service environment · Must be reliable and able to complete task in allotted timeframe Hours · Weekend shifts required · Some evening shifts required Company DescriptionReal Estate Management Company of affordable residential buildingsReal Estate Management Company of affordable residential buildings

Job Description BC MECHANICAL, INC. is a successful organization built on providing exceptional service and preventative maintenance to our commercial customers. We are currently seeking a commercial service technician with 3+ years preferred experience who is looking to join a well established company with an ever growing team. Applicants must be skilled on all types of HVAC systems, including but not limited to- chillers, water source heat pumps, and cooling towers. Problem solving, critical thinking, basic mechanical aptitude and the ability to communicate with customers is a must. Responsibilities and Duties: • Diagnose HVAC Systems, • Repair HVAC Units, • Perform Preventive Maintenance, • Complete Paperwork, • Good work ethic, • Team player with positive attitude, • Excellent communication skills, • Must be able to lift 50+ lbs, • Personal tools, • Clean and neat appearanceCompany DescriptionWe serve the five boroughs of NYC, as well as the tri-state area.We serve the five boroughs of NYC, as well as the tri-state area.

Job Description We are looking for a skilled and detail-oriented HVAC Sheet Metal Project Estimator to join our team. This role is responsible for preparing accurate cost estimates for HVAC sheet metal fabrication and installation projects. Responsibilities: • Prepare accurate and complete HVAC sheet metal estimates for fabrication and installation projects, • Perform quantity takeoffs for sheet metal, equipment, and accessories, • Review project specifications, drawings, and contract documents, • Determine project scope of work and required estimate components, • Develop detailed labor and material cost estimates, • Prepare and manage change orders based on revised mechanical/shop drawings, • Maintain organized files of all working documents, including pricing from suppliers and cost data, • Minimum 2-5+ years of sheet metal estimating experience preferred, • Strong knowledge of HVAC systems and sheet metal fabrication, • Proven ability to prepare accurate and complete estimates, • Excellent verbal and written communication skills, • Strong organizational and time management skills, • Ability to prioritize multiple projects and deadlines, • Detail-oriented with strong analytical and problem-solving skills, • Strong negotiation and leadership abilities, • Self-motivated with a strong work ethic.Company DescriptionFounded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.Founded in 1992, ALL-CITY METAL, INC., is a leader in both sheet metal HVAC fabrication and installation, as well as the fabrication, manufacturing and installation of Trash Compactors, Trash Chutes, Linen Chutes and chute doors. We are a full service company that designs and manufactures our products onsite in the USA. We offer a variety of products including the above and related specialty items, accessories, hardware and components.

Job DescriptionJob Summary/Company: Our client creates trust in the digital age with integrated security technologies in three business areas: Digital Security, Financial Platforms and Currency Technology. A Field Engineer will use his/her technical expertise and individual judgment to provide customer-site servicing, installation and repair of complex electromechanical equipment and will maintain a high level of customer satisfaction through the use of data-driven tools, proactive attention to customer requirements and positive customer interactions. This position provides support to customers on operational or maintenance aspects of equipment, receives escalated customer concerns on technical and service related problems, diagnoses mechanical, hardware, software, and systems failures using established procedures, determines the most effective repair/resolution to minimize customer downtime, and prepares reports for analysis of product failure trends and serviceability issues. Responsibilities: • Applies company policies and procedures to complete routine tasks., • Responds to service calls promptly, performs maintenance of equipment systems at customer sites and assists operators with operational problems that occur., • Represent our client in a highly professional manner., • Performs all administrative duties including record keeping, reporting, and inventory management in an accurate and timely manner., • Hands on experience with electro-mechanical equipment a plus., • Capabilities should include electro-mechanical troubleshooting ability, understanding of electronic principles, and a working knowledge of computer systems, PC’s and Networking., • Hands on experience with solenoids, belts, rollers, bearings, pneumatics, and guides a plus. This job is In-Person. Pay Range: Salary $68,000.00 to $75,000.00 We offer several comprehensive benefits package including health and life insurance, paid and unpaid time off, and retirement and savings plans to qualifying employees. Download the Sparks Group mobile app from Apple App Store or Google Play. Sparks Group is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, pregnancy, citizenship, family status, genetic information, disability, or protect veteran status.

Job Description Job Opportunity: Cabinet Maker / Millworker Aero Manufacturing Co., Inc. is seeking a skilled Cabinet Maker / Millworker to join our team at our North Jersey headquarters. Founded in 1946, Aero is a family-owned industry leader in heavy-duty industrial fabrication. This role will directly support our Commercial Foodservice Division, creating high-quality cabinetry, trim, and woodwork designed to be both complementary and integral to our signature stainless-steel products. The Role We are looking for a dedicated craftsman who can bridge the gap between traditional woodworking and industrial foodservice applications. You will be responsible for fabricating custom cabinetry and architectural woodwork that integrates seamlessly with our precision stainless-steel equipment. Key Responsibilities: • Wood Fabrication: Build custom cabinetry, trim, and specialized woodwork from shop drawings to support foodservice projects., • Integration: Collaborate with our stainless-steel fabrication team to ensure perfect fitment for integrated wood-and-metal assemblies., • Material Management: Select and prepare hardwoods, veneers, and sheet goods; manage hardware installation and final adjustments., • Experience: Minimum 5+ years of experience in custom cabinet making or architectural millwork., • Technical Skills: Mastery of standard shop machinery (table saws, shapers, planers) and hand tools., • Detail Oriented: Ability to read blueprints and technical drawings with precision. As a Union Shop, we provide a stable, professional environment for our craftsmen to excel. • Longevity & Stability: Work for a well-established company with a legacy spanning eight decades., • Union Benefits: This position includes a competitive union package:, • Comprehensive health insurance., • Strong pension/retirement plan., • Guaranteed wage scales and job security., • Paid time off and holiday pay., • Unique Work: Contribute to high-end commercial projects that combine the durability of steel with the aesthetics of fine woodwork.

Job DescriptionMajor Appliance Service Company Is in business over 50 years and is now hiring appliance repair technicians . Our company is looking for highly motivated and capable and responsible individual who is either mechanically inclined or has experience in appliance repairs. our company offers salary plus commission and a great work environment with growth opportunities

Job Description Job Title: Electrical Junior Mechanic (3–7 Years Experience) Job Description: We are looking for an Electrical Junior Mechanic with 3–7 years of experience to work on commercial job sites. The role includes conduit work, wiring, device installation, and reading drawings while following safety and quality standards. Responsibilities: • Bend, run, and install EMT and rigid conduit, • Pull wire and rough‑in MC/BX cable, • Install switches, outlets, lighting fixtures, and panels, • Read basic blueprints and electrical schematics, • Assist with panel work and switchgear, • Work safely and follow all job site rules, • 3–7 years of commercial electrical experience, • Strong conduit bending and wiring skills, • Ability to read drawings and layouts, • Knowledge of NEC and job site safety, • OSHA 30 and SST Card required, • Commercial job sites, • Typical hours: 7:00 AM – 3:30 PM Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Field Service Technician Job Description The Field Service Technician travels daily to customer sites across New England to evaluate, maintain, and repair pumps and related equipment. This role combines hands-on mechanical work in the field and in the shop with accurate documentation in a CRM system, all performed with a strong focus on safety and customer service. Responsibilities • Travel daily to customer locations to evaluate the condition and performance of pumps and related equipment., • Diagnose mechanical, hydraulic, pneumatic, and electrical issues with pump systems using troubleshooting techniques, schematics, and blueprints., • Perform maintenance and repair of pumps and related equipment at customer sites, ensuring reliable and efficient operation., • Provide support for pump start-ups, including setting up and adjusting pump operational programs to meet customer requirements., • Utilize a CRM system to promptly and accurately complete service reports, documenting work performed, parts used, and recommendations., • Evaluate pump products in the shop, including disassembly and inspection, and prepare detailed evaluations and repair estimates., • Perform complete pump product repairs in the shop, from component replacement to reassembly and testing., • Participate in a rotating on-call schedule to provide after-hours field service support as needed., • Use and maintain basic hand and power tools safely and effectively during all service activities., • Follow all safety procedures and guidelines, completing every task with safety as a top priority., • Communicate clearly with internal teams and customers about findings, repair options, and next steps., • Strong mechanical aptitude with hands-on experience working on industrial equipment or similar machinery., • Proficiency in troubleshooting mechanical, pneumatic, hydraulic, and basic electrical issues., • Ability to read and interpret blueprints and schematics for pumps and related systems., • Experience performing field service work, including on-site maintenance and repair., • Competence in preventive maintenance practices for industrial equipment., • Ability to use and maintain basic hand and power tools safely and effectively., • Comfort working with a CRM or similar system to complete service reports and documentation., • Valid driver’s license with a clean driving record to support daily regional travel., • Strong attention to detail and commitment to safety in all work activities., • OSHA 10 certification., • Pump technician, field service technician, or similar industrial service role., • Experience with pump systems, including installation, start-up, and repair, is highly beneficial., • Familiarity with production and industrial environments., • Ability to work independently in the field and manage time and travel efficiently. You will join a leading organization in the pump industry that provides the tools and support you need to succeed, including the use of a dedicated service van for field work. The company emphasizes long-term career growth and offers clear opportunities to advance within the department. You will work in a culture that values safety, professionalism, and continuous learning, giving you the chance to build a stable, rewarding career while expanding your technical skills. Work Environment This role is primarily field-based, with daily travel throughout New England to industrial customer sites, as well as time spent in the shop for evaluations and repairs. You will work in industrial environments around pumps and related equipment, using basic hand and power tools and standard diagnostic equipment. The position requires flexibility to travel regularly and to participate in a rotating on-call schedule for after-hours support. Work conditions may include noisy areas, moving machinery, and varying site conditions, where adherence to safety procedures and appropriate work attire, including personal protective equipment, is essential. Job Type & Location This is a Permanent position based out of Newark, NJ. Pay and Benefits The pay range for this position is $68000.00 - $83000.00/yr. Permanent role / company service van Workplace Type This is a fully onsite position in Newark,NJ. Application Deadline This position is anticipated to close on May 21, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Fusion Splicer Service Technician - New Jersey About the Role: Join a leading fiber optics equipment manufacturer supporting telecom carriers and contractors across North America. This role focuses on the repair, calibration, and maintenance of fusion splicers and related test equipment. Key Responsibilities: * Diagnose, repair, and service fusion splicers (primary focus), OTDRs, and test equipment * Perform calibration and optical alignment per specifications * Handle RMA units: inspect, repair, test, and return within timelines * Maintain service logs and documentation in internal systems * Communicate repair status and technical findings to customers * Support inventory and quality control processes * Provide occasional remote/on-site technical support Qualifications: * Experience with fusion splicers (OTDR experience a plus) * Knowledge of fiber optics, splicing, and network infrastructure * Strong troubleshooting and electro-mechanical repair skills * Basic electrical knowledge and hand tools experience * Good communication and customer-facing ability * Associate's degree in Electronics/Electrical field or equivalent experience Company DescriptionW3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more. We’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies. Our Services W3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates. We specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding. We are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software. Our Expertise W3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs. As a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.W3Global was established in 2006 in Fremont, CA with a vision: simplify the recruiting process and develop an industry-disrupting platform to connect candidates with clients. Our cutting-edge Applicant Tracking System enables us to find the right person for the right job, creating value for job seekers and employers. While W3Global initially focused on IT staffing, we have expanded the business to serve many other industries, including accounting and finance, legal, engineering, human resources, government and more.\r\n\r\nWe’re proud of the investments we’ve made in our team, having grown from four to 1000 employees and evolving into one of the leading recruitment and staffing solution providers in the industry. Our recruiters and account managers are passionate about connecting qualified professionals with the right positions in small, medium, and large companies.\r\n\r\nOur Services\r\nW3Global understands the natural ups and downs of an organization’s staffing needs. We are continuously adapting to industry and economic changes to find the right candidates.\r\n\r\nWe specialize in placing permanent, direct, contract, and temporary positions for companies of any size. Our recruiting services include sourcing, recruiting, screening, interview management, salary negotiations, training, and onboarding.\r\n\r\nWe are committed to helping organizations redefine their recruitment process by delivering our SaaS-based proprietary application tracking system software.\r\n\r\nOur Expertise\r\nW3Global has been delivering staffing solutions for nearly two decades; we know which recruiting strategies work best. Our expert team is committed to developing a customized solution to fit your company’s unique needs.\r\n\r\nAs a W3Global client, you’ll also receive personalized assistance from a seasoned team of staffing specialists. We are committed to providing both technical support and industry expertise to simplify the hiring process. We know that your time matters. W3Global will help you streamline the hiring process, getting it done and getting it right.

Job Description Astrophysics Inc. is a global leader in X-Ray security inspection systems, dedicated since 2002 to making the world safer through advanced screening technology. Our systems protect critical infrastructure in over 150 countries, serving airports, government buildings, military bases, and more. We currently have an immediate full-time position opening for a Field Service Technician to be based remotely, located in or near New York, NY. Job Summary The Field Service Technician is responsible for on-site installation, preventative maintenance, and corrective maintenance of Astrophysics products at various customer locations. In this role, the technician will troubleshoot, diagnose and repair products, perform maintenance, and complete all service documentation and reports. The Field Service Technician must maintain a professional appearance and provide exceptional customer service. The Field Service Technician position requires the ability to travel, reliable vehicle transport, and a valid driver’s license. Essential Functions: • Perform on-site installation, and preventative and corrective maintenance., • Complete all necessary service documentation, including reports, radiation surveys, parts requisitions, and expense reports., • Test faulty equipment to diagnose malfunctions and return the defective parts regularly, as parts are accumulated and shipping is cost-effective., • Input and maintain all data in the service databases (including Astrophysics proprietary software and apps), ensuring timely and accurate completion., • Review machine and customer information prior to arriving on-site, and prepare the necessary equipment, parts, and documentation in advance., • Update the customer and Astrophysics service headquarters on progress and status of service call., • Deliver the customer package, including warranty, customer survey, and copies of all relevant reports., • Ensure an outstanding customer service experience., • Promote the sale of extended warranty service contracts and repeat x-ray purchases., • Provide operator and/or technical training., • Provide technical phone support and documentation as needed., • Associate’s or Bachelor’s Degree in Electronics, Computer Engineering, or related field., • 2-7 years technical support or field service experience., • Excellent analytical, problem-solving and troubleshooting ability., • Excellent customer service skills., • Professional appearance, demeanor and attitude., • Ability to consistently travel to various work sites., • Excellent medical, dental and vision benefits, • 401K plan with 4% employer match, • 11 paid holidays, 10 PTO days, • Free donuts on Fridays, company luncheons and year end party! Be part of a meaningful security mission with opportunities for personal and professional growth and development. Join our Astrophysics family today! Equal Opportunity Employer Astrophysics Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability. For accommodation requests, please contact Human Resources at (909) 598-5488. Compensation details: 66560 Yearly Salary PI41f0758bfbe9-25405-40425252

Heavy Duty Diesel Mechanic - Commercial Trucks About the job Heavy Duty Diesel Mechanic - Commercial Trucks Summary We are seeking a skilled and experienced Heavy Duty Diesel Mechanic to join our team, responsible for performing comprehensive repairs and preventative maintenance on a variety of heav

Join to apply for the AP Physics C: Mechanics Tutors (Instant) role at Varsity Tutors, a Nerdy Company The Varsity Tutors Live Learning Platform has thousands of students looking for immediate online AP Physics C: Mechanics help nationally. Expertise in AP Physics C: Mechanics and the ability to ex

Documented experience as a SUPER on at least 3 SCA projects with a GC. Ability to understand order of materials & payroll and all required'self-performing' paperwork required by the SCA. We are searching for an experienced Construction Superintendent with documented SCA experience.

They specialize in SCA new builds, renovations, ADA upgrades, and occupiedschool construction, with a strong track record of compliance with SCA, DOE, and DOB requirements. Enforce SCA, DOE, DOB, and OSHA safety and compliance standards. Communicate with SCA representatives, CMs, and project stakeho

What You’ll Be Doing Perform startup, commissioning, and field service of HVAC control systems and airflow equipment Troubleshoot low voltage electrical controls, DDC systems, sensors, and field devices Support maintenance, calibration, and certification of laboratory airflow and fume hood control

A global consulting firm is looking for experienced Global External Consultants in Labor Law and HR Management. Candidates should have over 8 years of relevant experience and a strong understanding of compliance and labor practices.

Journeyman level electrician assisting in the installation, alteration, addition, and/or repair of electrical systems on commercial work sites. May operate hand tools and equipment under direct supervision of a Foreman or more senior electrician. An apprentice electrician will not work on energized

A successful Superintendent - Residential Construction should have:. If you are ready to take the next step in your career as Superintendent - Residential Construction, apply now to join this reputable organization and make a lasting impact in the construction industry!.

The Bristal Assisted Living - 305 West End305 W End Ave - Responsibilities: Perform building maintenance and repairs for the assisted living community; Paint and spackle as part of maintenance tasks; Handle light plumbing, carpentry, HVAC, electrical work as needed; Assist with snow removal and equi

The Department of Investigation (DOI) is seeking a highly skilled Assistant Inspector General to join Squad 3 which oversees several key New York City agencies, including the Department of Housing Preservation and Development, the Department of Buildings, the Housing Development Corporation, the Dep

The duties and responsibilities of the selected Inspector General will include, but are not limited to the following: Manage and oversee investigations of fraud, corruption, misconduct, waste, and mismanagement including document requests and issuance of subpoenas, reviews of records, conducting int

The CEI Senior Roadway and Bridge Construction Inspector will inspect and monitor construction activities at the project site(s). Performing both complex and routine/standard inspections of construction to evaluate if appropriate materials and construction processes are used; and that construction c

Applicants should have a background in the jewelry industry and have working knowledge and experience with jewelry construction techniques as well as an understanding of inspection criteria including Inspection Levels, AQLs, and sampling plans and standards (ANSI/ASQ Z14). Responsible for inspecting

What You'll Do - Design realistic workplace scenarios drawn from your practice (EEOC charges, severance and non-compete drafting, harassment investigations, wage & hour analyses, NLRB matters, employment policies) - Write "golden" reference responses at attorney-level quality - Grade AI-generated re

Skills: Circulate for C-section, Labor & Delivery.