Solar electrical jobs in Oakland, CaliforniaCreate job alerts

Astranis builds advanced satellites for high orbits, expanding humanity’s reach into the solar system. Today, Astranis satellites provide dedicated, secure networks to highly-sophisticated customers across the globe— large enterprises, sovereign governments, and the US military. With five satellites on orbit and many more set to launch soon, the company is servicing a backlog of more than $1 billion of commercial contracts. Astranis is the preferred satellite communications partner for buyers with stringent requirements for uptime, data security, network visibility, and customization. Astranis has raised over $750 million from some of the world’s best investors, from Andreessen Horowitz to Blackrock and Fidelity, and employs a team of 450 engineers and entrepreneurs. Astranis designs, builds, and operates its satellites out of its 153,000 sq. ft. headquarters in Northern California, USA. Facilities Technician Join our team as an Facilities Technician, where you'll play a vital role in ensuring world class operations, buildout, and maintenance of our satellite manufacturing facility and office space. This position offers the opportunity to work with a tight-knit team using various tools and equipment to ensure smooth day-to-day operations. Role • Perform hands on installation, maintenance, and repairs, such as plumbing, electrical, HVAC, and carpentry work, • Respond to emergent requests to limit facility and equipment downtime, • Assemble, arrange, and move furniture and equipment as needed for new area buildouts or moves, • Open, track and resolve electronic work tickets for requests and projects, • Work with external contractors and vendors for specialized repairs and services, • Follow and enforce safety protocols and procedures to promote a safe and secure work environment, • Document and maintain various tools, hardware, and equipment in order to limit downtime, • Provide operational and logistics support for our spacecraft and technology development programs as needed Requirements • 3+ years working in a facility technician, construction trade, or similar technical hands-on role, • Proficiency with common hand and power tools, • Willingness to work flexible hours, including evenings and weekends, as needed, • Ability to safely utilize ladders of various heights to complete tasks and projects, • Ability to lift 50 lbs and comfortable with being on your feet for extended periods Bonus • Prior working experience in a hardware manufacturing and testing facility, • Knowledge and ability to troubleshoot and repair building systems and equipment, including HVAC, plumbing, and/or electrical systems, • Experience programming and operating digital Building Management Systems (BMS), • Aerial Work Platform certification or experience, • Familiarity with Google tools, JIRA, and Confluence What we offer: All our positions offer a compensation package that includes equity and robust benefits. Base pay is just one component of Astranis’s total rewards package. Your compensation also includes a significant equity package via incentive stock options, high-quality company-subsidized healthcare, disability and life insurance, 401(k) retirement planning, flexible PTO, and free on-site catered meals. Astranis pay ranges are informed and defined through professional-grade salary surveys and compensation data sources. The actual base salary offered to a successful candidate will additionally be influenced by a variety of factors including experience, credentials & certifications, educational attainment, skill level requirements, and the level and scope of the position. Base Hourly Pay $34 - $45 USD U.S. Citizenship, Lawful Permanent Residency, or Refugee/Asylee Status Required (To comply with U.S. Government space technology export regulations, applicant must be a U.S. citizen, lawful permanent resident of the United States, or other protected individual as defined by 8 U.S.C. 1324b(a)(3)) Our mission and our products are meant to connect the world and everyone in it, regardless of gender, race, creed, or any other distinction. We believe in a diverse and inclusive workplace, and we encourage all people to join our team and bring their unique perspective to help make us stronger.

Company Overview: MaxSolar is a leading provider of Operations & Maintenance (O&M), Asset Management and Technical Services for solar photovoltaic and battery storage systems in the commercial marketplace. As a comprehensive services provider, MaxSolar supports client needs throughout the entire project life cycle. Our programs ensure that system owners receive the maximum energy, environmental, and financial benefits from their assets. Position Overview: The Field Technician is required to troubleshoot and resolve solar PV and battery storage system issues, including emergency repairs/corrective maintenance, design change requirements, and equipment modifications/upgrades. Position will also be responsible for Preventative Maintenance activities to support system performance of O&M portfolio, as well as, QA/QC inspections, system commissioning and pre-con site assessments. Responsibilities: As a Solar Technician/Electrician within the Operations and Maintenance team, you will play a critical role in ensuring the safe, efficient, and reliable performance of solar energy systems. Key responsibilities include: • Performing routine maintenance, inspections, and system checks on solar equipment to ensure optimal performance., • Operating, maintaining, troubleshooting, and repairing equipment issues identified during inspections or daily operations., • Conducting electrical testing, measurements, and diagnostics to identify and resolve electrical issues., • Utilizing a basic understanding of system monitoring platforms to review and analyze performance data, identify trends, and flag potential concerns., • Preparing formal documentation of all field activities, task procedures, and maintenance actions., • Adhering to all safety protocols, company policies, and industry standards., • Providing technical guidance and support to junior technicians as needed., • Demonstrating strong attention to detail in all aspects of work., • Assisting with QA/QC activities, commissioning of new solar installations, and site assessments., • Managing preventive maintenance tasks and deliverables, including independently performing basic electrical tasks., • Conducting advanced testing and troubleshooting, including work on electrically live devices when required and permitted., • Performing lockout/tagout (LOTO) procedures in accordance with established guidelines and safely releasing systems for troubleshooting., • Executing work instructions for both electrical and mechanical repairs on on-site equipment., • Working within distribution-level systems up to 600 VAC and within PV array limits up to 1000 VDC., • Applying low-voltage test equipment, including conducting pre- and post-use inspections, safely connecting instruments, and interpreting test results. Qualifications: • Associates Degree in Engineering or equivalent Technical Certification/Training, • Licensed Electrician and NABCEP certification preferred., • Valid Driver’s license with clean record., • One (1) year minimum experience installing/maintaining commercial scale battery storage systems preferred., • Ability to work remotely and independently., • Project management/field operations management experience preferred., • Previous experience working with power electronic conversion equipment., • Experience with metering and test equipment., • Experience with centralized DAS/SCADA/EMS control systems., • Working knowledge of Commercial Power Plant Operations., • Ability to read electrical/mechanical drawings, equipment manuals and technical specifications., • Familiarity with CMMS based work order/ticketing systems and mobile reporting tools., • Working knowledge of NEC and local building codes and OSHA safety standards (OSHA 30 preferred)., • Ability to efficiently troubleshoot system failures., • Proficient with the use of the Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)., • Must be willing and able to climb ladders, stairs and work on rooftops., • Ability to work in extreme weather conditions. Benefits: • Competitive salary and performance-based incentives, • Health, dental, and vision insurance, • Retirement savings plan, • Opportunities for professional development and career advancement

Requisition ID # 172626 Job Category: Engineering / Science Job Level: Individual Contributor Business Unit: Strategy & Growth Work Type: Hybrid Job Location: Oakland Job Title: Senior Grid Innovation Engineer Job Code: 51986179 Team Summary The Grid Innovation Delivery (GID) team is making the grid of the future a reality. The team scales new technologies and pilots into sustainable, mature programs that PG&E utilizes to deliver for our hometowns and serve our planet. The team bridges early R&D innovation efforts and PG&E's established lines of business. The Remote Grid (RG) Program is the GID team's primary product today. Remote Grids cost-effectively address wildfire risk by serving customers with fully islanded (24/7/365) microgrids of solar, batteries, and fuel-powered generation and permanently removing high-risk overhead power lines. The GID team has deployed and supports the operation of 18 RGs with plans to grow the fleet to two dozen in the next two years. See the RG Program page here, as well as media coverage from the PG&E newsroom here. Position Summary This Senior-level Grid Innovation Delivery Engineer is an electrical engineering thought leader, who builds the knowledge base and collaboratively develops innovative solutions to increase safety, reliability, decarbonization, and affordability. They develop new standards and process documentation to mature the program. Grid Innovation Delivery Engineers also take full ownership of each project's technical execution throughout its lifecycle: The project engineer iterates on the project design with Engineering Procurement, and Construction (EPC) vendors with attention to safety, customer need, environmental impacts, constructability, and maintenance. They analyze microgrid energy modeling and product sizing to ensure right-fit solutions and compliance with technical and construction specifications, including approval of testing and Go-Live operations. Once a project is live, they continue to support Operations and Maintenance (O&M) through performance analytics, identification of operational improvements, and root cause investigations. A strong applicant will be an organized and diligent collaborator, proactively driving a broad range of technical and cross-functional tasks. They will collaborate closely with other Grid Innovation Engineers, PG&E groups (e.g. project management, environmental, asset management), and external partners. This is a well-rounded engineering role with flexibility to leverage the applicant's unique skillset to own specific responsibilities and to pursue development opportunities. Experience with electrical engineering design or civil engineering design is a plus. This position is Hybrid, primarily working from your remote office within PG&E's service territory. In-person activities at PG&E's new Oakland General Office are based on business needs, focusing on synchronous collaboration, affinity building, ideation, or planning activities (1-2 times per week). The role will also require travel to sites throughout the PG&E service territory (need varies, 6 times a year on average). After the first year, this role is eligible to apply for an alternative 9/80 schedule (eight nine-hour days and one eight-hour day over a two-week period). Project engineers rotate "on call" duties for operational projects to support engineering troubleshooting during rare system outages. PG&E is providing the salary range that the company in good faith believes it might pay for this position at the time of the job posting. This compensation range is specific to the locality of the job. The actual salary paid to an individual will be based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, and internal equity. We would not anticipate that the individual hired into this role would land at or near the top half of the range described below, but the decision will be dependent on the facts and circumstances of each case. A reasonable salary range is: Bay Area Minimum: $122,0000 Bay Area Mid-point: $158,000 Bay Area Maximum: $194,000 This job is also eligible to participate in PG&E's discretionary incentive compensation programs. Core Responsibilities: - Assist customers and PG&E stakeholders in assessing the viability and requirements to develop distributed energy technology projects - Collaborate with external vendors, other utilities, manufacturers, and internal teams (e.g. engineering, IT, and standards departments) on advancing new distributed energy resources applications - Understand the various data streams that are needed to model microgrid behavior - Meet with stakeholders to better understand their issues and inform them of the potential impacts - Explore, innovate, and demonstrate technologies that deliver safe, reliable, and affordable energy solutions - Identify conditions when distributed energy resources may provide more benefits to the customers and the grid - Assist in assessments of potential distributed energy resources risks - Assist in material prep and/or presenting for technical experts in regulatory proceedings and industry working groups Minimum Qualifications: Bachelor's Degree in Engineering or equivalent experience Experience with grid modeling software (e.g. CYMDIST, PSLF, Aspen, etc.) * 5 years of electric utility related experience Desired Qualifications: - Experience working at or with developers of distributed energy resources - Understanding of construction, electrical, and power system protection design - Experience driving technology R&D through pilots and scale-up in the face of ambiguity - Knowledge of applicable laws, codes, and standards for microgrids or distribution service - Experience with the following design tools: HOMER, PVSyst, AutoCAD, Bluebeam, and Google Earth. Proficient in Microsoft Office Suite and Microsoft 365. - Experience analyzing energy data (Excel and SQL at a minimum; Pandas, NumPy, or R desired) - Effectively communicate highly complex ideas with credibility, confidence, and clarity to diverse audiences using verbal, written, and visual means - Bias toward action with a strong sense of ownership and empathy - Masters of Science in Engineering (Electrical preferred) - Licensed Engineer-in-Training or Professional Engineer (P.E. Electrical preferred) in the State of California - Bachelor's in Engineering (Electrical preferred) - 5 years of job-related experience

The Opportunity: Glumac, a Tetra Tech company, is seeking a Commissioning Authority to join our world-class Data Center Commissioning Team. This is a unique opportunity to be part of a global leader in the construction space and get hands-on experience with Data Center projects in addition to exposure across all project types. Position Summary: Commissioning is a quality assurance process that is invaluable to building and infrastructure owners, ensuring that systems and components are installed and operate as intended. This role will give you a chance to experience work both in the office and in the field with hands-on testing of a range of systems improving building performance, energy efficiency, reliability, and occupant comfort. The Glumac Commissioning Team is a dedicated team of professionals focused exclusively on providing the highest quality commissioning services. Currently, we have over 30 full-time commissioning staff working on world-class projects, including LEED Cx, Title 24 Cx, retro-commissioning, energy studies, measurement and verification, ongoing commissioning, etc. We work with our clients from design to move-in and beyond, bringing together the owner, design team, contractors, and building operators to support and achieve the project goals. As a Data Center Commissioning Authority, you will lead and manage the commissioning process for assigned projects, including conducting field functional testing, creating checklists, documenting test results, and maintaining issue logs and reports. You will also participate in meetings, support project management tasks, follow internal procedures and industry standards, ensure safe work practices, and stay current through ongoing professional development. Essential Job Functions: The following duties are considered essential to the role. Reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions: Conduct field functional testing. Create pre-functional and functional checklists. Lead commissioning meetings and manage the commissioning process for assigned projects. Perform field observations and document test results. Maintain issue resolution logs and compile commissioning reports. Assist with project management duties as needed. Conduct activities in line with internal procedures, legislation, and industry standards. Pursue continuous professional development and maintain a high degree of discipline knowledge and awareness. Work in a safe manner at all times and report all health and safety incidents and concerns. Additional duties as required. Required Qualifications: A Bachelor's or advanced degree in engineering or a related field, or industry commensurate experience. 8+ years of related industry experience and 2+ years of experience in datacenter commissioning, operations, or construction. ANSI/ISO Accreditation Cx Certification (BCxA CCP, ACG CxA, ASHRAE BCxP). Strong technical knowledge of datacenter MEP system design and operation, controls, and instrumentation. Project management expertise, including scheduling, budgeting, and resource planning. Exceptional client-facing, client relationship, and client management skills. Ability to work autonomously and in team environments. Outstanding written and verbal communication abilities. Proficiency in MS Office. Safety first mindset. Ability to climb ladders/stairs and lift/carry loads above 20 lbs. Ability to be on a job site for extended periods (8-10 hours). Willingness and ability to travel as needed, approximately 50%. Valid driver's license and insurance. Preferred Qualifications: Professional licensure (PE license, Energy Management, or TAB certifications) is a plus. Ability to manage QA/QC processes. Electrical systems commissioning experience. Experience with commissioning software or ongoing commissioning tools. Candidates with commensurate experience gained from military service will be considered and are highly encouraged to apply. Experience gained from military service maintaining, operating and/or testing nuclear power or other power systems. This includes power systems, battery systems, steam generation, hydroelectric plants, medium voltage distribution, and more. Experience gained in commissioning, testing, or quality assurance of medium voltage power systems that include power plants, solar, electric vehicle charging, critical power systems, and more. Work Environment and Location: This position requires regular travel to data center project sites, with 50-70% travel expected. Our hybrid work environment requires two in-office and/or on-site days per week. All candidates must be located in and eligible to work in the U.S. Compensation: Salary Range: $110,000 - $180,000 (depending on experience) The base salary range represents the low and high end of the compensation scale for this role. Actual salaries will be determined based on location, experience, responsibilities, and qualifications. This salary range is just one component of Glumac's total compensation package, which includes benefits, professional development opportunities, and additional incentives. Why Glumac, a Tetra Tech Company: Glumac has been a leader in the sustainable building design industry for over 50 years. In 2017 we joined Tetra Tech, enabling us to combine our expertise with the reach and resources of a prestigious global organization. At Tetra Tech, we are Leading with Science to solve the world's most complex challenges. Our industry-leading experts in engineering and consulting are committed to driving positive change in communities around the world. For nearly 60 years, we have been at the forefront of innovation and sustainability. Today we stand as a market leader, offering cutting-edge solutions in water, environment, energy, and international development. Our work has improved more than 625 million lives around the world. Your Impact: Join Glumac, a Tetra Tech company, to make a real difference. Our work leverages cutting-edge technologies, advanced analytics, and the expertise of world-class scientists and engineers to create meaningful change around the world. Discover your full potential - join us to advance your career while leaving a lasting legacy. Life at Glumac, a Tetra Tech Company: The perks of working at Glumac, a Tetra Tech company, include: Comprehensive and market-competitive benefits. Merit-based financial rewards. Flexibility and company-wide commitment to work/life balance. Collaborative team atmosphere that values the contributions of all employees. Learning and development opportunities for ongoing professional growth. About Tetra Tech: Tetra Tech is the leader in water, environment, and sustainable infrastructure, providing high-end consulting and engineering services for projects worldwide. Our 25,000 employees work together to provide clear solutions to complex problems by Leading with Science to address the entire water cycle, protect and restore the environment, design sustainable and resilient infrastructure, and support the clean energy transition. Tetra Tech is proud to be an Equal Opportunity Employer. All qualified candidates will be considered without regard to race, color, religion, national origin, age, disability, sex, marital or familial status, status as a protected veteran, or any other characteristic protected by law. Tetra Tech is a VEVRAA federal contractor and we request priority referral of veterans. We invite applications from all interested parties. Additional Information Organization: 150 GTT

Job Description Are you a seasoned professional in electrical construction with a knack for project management? We're searching for a talented Electrical Project Manager to join our dynamic team. If you're ready to take on challenging projects and make a significant impact, this role is for you! Who are we? We are Anvil Power; a civil engineering and electrical construction company founded in the Bay Area and are now serving clients throughout the Western United States. Our areas of expertise include: Pumpstations, Wastewater Treatment Plants, Water Treatment plants, Solar, Bus Charging stations and design-builds. www.instagram.com/anvil_builders/ Key Responsibilities: Lead in the planning, design, and execution of electrical projects from conception to completion. Provide technical expertise and guidance on complex electrical systems and components. Collaborate closely with clients, architects, contractors, and internal teams to ensure project success. Oversee project budgets, schedules, and resources to meet quality, safety, and regulatory standards. Conduct thorough inspections, testing, and commissioning to ensure project integrity and performance. Requirements: Extensive experience in electrical construction, with a focus on project management. Proficiency in CAD software and other relevant engineering tools. Strong leadership skills and ability to motivate and inspire team members. Excellent communication, problem-solving, and decision-making abilities. Benefits: Competitive salary and comprehensive benefits package. Opportunities for professional growth and career advancement. Stimulating and collaborative work environment with a focus on innovation. Chance to work on diverse and exciting projects that make a difference. Join us in our commitment to excellence and innovation in electrical construction! If you're ready to take your career to new heights and lead impactful projects, apply now for the position of Electrical Project Manager. Powered by JazzHR 0r3BtgRZhL

Job DescriptionAbout GridwareGridware is a San Francisco-based technology company dedicated to protecting and enhancing the electrical grid. We pioneered a groundbreaking new class of grid management called active grid response (AGR), focused on monitoring the electrical, physical, and environmental aspects of the grid that affect reliability and safety. Gridware’s advanced Active Grid Response platform uses high-precision sensors to detect potential issues early, enabling proactive maintenance and fault mitigation. This comprehensive approach helps improve safety, reduce outages, and ensure the grid operates efficiently. The company is backed by climate-tech and Silicon Valley investors. For more information, please visit www.Gridware.io. Role Overview The Data Analyst, Fleet Triage & Operations owns the front line of fleet issue detection, prioritization, and incident learning at the device health layer — sitting at the interface of Gridware's hardware programs, including Gridscope and our connectivity solutions. As the deployed fleet scales, telemetry volume grows faster than any team can manually inspect, and not all signals matter equally. This role separates signal from noise, ensures the right issues reach the right teams before they become incidents, and leads the postmortem process to make sure the same class of issue doesn't go undetected twice. You'll design and operate a tiered triage pipeline, tune the detection logic that surfaces emerging device health issues, and facilitate postmortems end-to-end — from incident timeline reconstruction through action item closure. This is a highly cross-functional role that blends data analysis, operational rigor, and structured incident learning across hardware, firmware, and connectivity domains. Responsibilities • Own and operate Gridware's fleet triage pipeline for device health issues, intaking signals from telemetry, monitoring, field reports, and customer feedback, and routing them through a tiered prioritization framework., • Define and continuously tune detection logic, thresholds, and alerting rules that distinguish signal from noise across device health, connectivity, configuration, and environmental data., • Maintain a tiered triage approach (P0–P3) with clear entry criteria, SLAs, ownership, and escalation paths across hardware, firmware, and connectivity stakeholders., • Build dashboards and queries that surface emerging trends — shifts in last-seen, connectivity degradation, configuration drift, anomalous failure clusters — before they reach incident severity., • Investigate ambiguous fleet signals to determine scope, impact, and likely owner across the Gridscope and connectivity hardware programs; produce structured triage write-ups that enable fast cross-functional action., • Lead postmortems end-to-end: facilitate blameless reviews, reconstruct incident timelines, drive root cause analysis, and own action items through to closure., • Track triage and incident metrics (time-to-detect, time-to-acknowledge, false positive rate, repeat-issue rate) and use them to iterate on the pipeline., • Document triage playbooks, runbooks, and decision trees so the process scales beyond any one person.Required Skills, • Bachelor's degree in Computer Science, Data Science, Engineering, Statistics, or related field., • 5+ years in a data-focused or operations-focused role (Data Analyst, Operations Analyst, Site Reliability Analyst, or similar) where triage, prioritization, or incident response was a core responsibility., • Proficiency in SQL and Python for querying telemetry data and automating triage workflows., • Demonstrated experience designing prioritization frameworks, alerting logic, or triage pipelines in high-signal environments., • Strong analytical judgment for distinguishing meaningful signal from noise in noisy, real-world data., • Excellent written communication, with a track record of producing concise, structured issue summaries and postmortem documents., • Comfort facilitating cross-functional discussions, including blameless postmortems with engineering, firmware, and operations stakeholders.Bonus Skills, • Experience leading postmortems or incident reviews for IoT fleets, distributed systems, or large-scale hardware deployments., • Familiarity with Databricks, PySpark, Pandas, and observability tools (Looker, Grafana, Datadog)., • Exposure to time-series telemetry, anomaly detection, and SLO/SLA design., • Experience with power-constrained, solar-powered, or communication-constrained connected devices., • A passion for sustainability, clean tech, or the energy industry.This describes the ideal candidate; many of us have picked up this expertise along the way. Even if you meet only part of this list, we encourage you to apply! BenefitsHealth, Dental & Vision (Gold and Platinum with some providers plans fully covered) Paid parental leave Alternating day off (every other Monday)“Off the Grid”, a two week per year paid break for all employees. Commuter allowance Company-paid training

Job Description About the Opportunity: Saratech is seeking a Mechanical Engineer to support the design, analysis, assembly, and testing of advanced spacecraft systems for a cutting-edge aerospace program. This role offers hands-on involvement across the full hardware lifecycle, from concept through environmental testing, in a fast-paced engineering environment. Salary Range: • $85 - $110 per hour Qualifications and Experience: BS or MS in Mechanical Engineering, Aerospace Engineering, or related field 3+ years of spacecraft mechanical design and integration experience (or equivalent) Proficiency with CAD software (NX preferred) Experience with structural and thermal hand calculations (FEA preferred but not required) Experience designing and fabricating composite and/or metallic components Ability to generate engineering drawings with appropriate GD&T Ability to read and interpret engineering drawings and schematics Strong problem-solving and critical-thinking skills Self-motivated with the ability to prioritize tasks in a dynamic environment Strong teamwork and communication skills Duties and Responsibilities: • Design, analyze, procure, assemble, and test spacecraft structures, mechanisms, and solar arrays Define loads, interfaces, and functional requirements at component and system levels Select materials and mechanical components suitable for space environments Apply Design for Manufacturing (DFM) and Design for Assembly (DFA) principles Contribute to spacecraft-level mechanical architecture Collaborate with electrical engineers to integrate avionics and wiring harnesses Perform mechanical and/or thermal analyses using hand calculations and analysis tools Generate manufacturing drawings, manage bills of materials (BOMs), and source components Participate in hands-on prototyping, assembly, and functional testing Support sub-assembly and vehicle-level environmental testing (vibration, thermal vacuum, etc.) Design ground support equipment including assembly jigs, test fixtures, and mass offload systems Support vehicle integration efforts across engineering teams Assist with improvements to manufacturing, test, and integration facilities Identify opportunities to improve operational efficiency Skills and Abilities: • Experience with spacecraft environmental testing (launch vibration, thermal vacuum), • Passion for hands-on hardware development, • Experience with composite structures, • Proficiency with NX, • Experience with Thermal Desktop and/or NX Nastran, • Machine shop prototyping experience (CNC mill/router, mill, lathe, laser cutter, 3D printer), • Experience with Python or other programming languages Other Requirements: • Complies with all organizational policies and procedures, • Maintains strict confidentiality of all customer and/or employee information to assure customer and/or employee rights are protected, • Adheres to policies regarding notification of absence and PTO requests, • Attends all mandatory management and staff meetings, • Represents the organization in a respectful and professional manner, • Attend and comply with annual health, safety, training, and education requirements, • Adheres to dress code, appearance is neat and clean Additional Information: • Physical demands:, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job., • The ideal candidate must be able to complete all physical requirements of the job with or without a reasonable accommodation., • Must be able to remain in a stationary position 50% of the time. The person in this position needs to occasionally move about inside the office to access file cabinets, office machinery, etc., • Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine, and computer printer., • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Follow detailed complex directions, reason and problem solve., • The person will frequently communicate and converse with other staff. Must be able to exchange accurate information in these situations., • Company participates in E-Verify., • Company is committed to providing equal employment opportunity without regard to race, color, religion, sex, sexual orientation, national origin, age, disability, or any other protected status with respect to recruitment, hiring, promotion, and other terms and conditions of employment., • Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time;, • This description reflects managements assignment of essential functions, it does not proscribe or restrict the tasks that may be assigned, • This job description is subject to change at any time. Benefits Insurance: All full-time regular employees (and dependents) are eligible to get medical, dental, vision coverage. Employees also can buy up on benefits like FSA, HSA, Life insurance, long and short-term disability. Comprehensive health care and wellness plans Retirement Plan: All employees can enroll in the company's 401k with company matching. Paid Time Off: All full-time regular exempt employees are eligible for our Discretionary Time Off vacation policy after 90 days from their start date, Discretionary Time Off plan is a non-accrual plan for employees. All full-time regular non-exempt employees are eligible for our Paid Time Off Plan policy after 90 days, Paid Time Off plan is an 3.33 hours accrual per pay period for employees. Paid Time Off: All full-time regular exempt employees are eligible for our Discretionary Time Off vacation policy after 90 days from their start date, Discretionary Time Off plan is a non-accrual plan for employees. All full-time regular non-exempt employees are eligible for our Paid Time Off Plan policy after 90 days, Paid Time Off plan is an 3.33 hours accrual per pay period for employees. Paid Holidays: All full-time employees will receive 8 paid holidays per year. Full-time non-exempt employees receive an extra floater holiday per year. Paid Sick Time: All full-time and part-time employees will receive 40 sick hours per year or minimum sick time required by the state. NOTE TO STAFFING AGENCIES AND RECRUITERS: Saratech does not accept unsolicited resumes from any external agency for the placement of any position. Unsolicited resumes submitted by agencies and received by Saratech will be considered the property of Saratech and may be contacted and engaged with directly by Saratech. Saratech will not pay a placement fee or any other fees to any third-party agency, firm, or recruiter who is not specifically retained with a signed fee agreement by Saratech Human Resources to conduct a candidate search. Please do not forward unsolicited resumes to our website or to any Saratech employee. Saratech will not be responsible for any fees associated with unsolicited resumes. EQUAL EMPLOYMENT OPPORTUNITY NOTICE: Paydarfar Industries, Inc. dba Saratech is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, national origin, disability, protected veteran status, or any other basis protected by applicable federal, state, or local law. #HI Subject to background check

Job DescriptionAbout Zipline Zipline is the world's largest and most experienced drone delivery service. We are on a mission to serve all humans equally by ensuring access to food, medicine and essential goods anytime, anywhere. We design, build, and operate the world's largest autonomous logistics system, delivering critical supplies quickly and reliably. Today, Zipline operates on four continents, makes a delivery somewhere in the world every 30 seconds, and has completed millions of deliveries to date, including blood, vaccines, medical supplies, food, and retail products. Our customers include the world's largest and most prominent healthcare systems, governments, retailers, restaurants and global businesses who rely on us to save lives, reduce emissions, increase economic opportunity, and provide delivery from point A to point B as fast as possible. The drone is only 15% of what we've built to enable seamless, reliable, global operations. Our system strengthens supply chains, reduces congestion, and gives people time back. With more than 140 million commercial autonomous miles safely flown, Zipline is redefining access to healthcare, consumer products, and food across the globe. We operate at a global scale and are looking for practical problem solvers who thrive on real-world challenges and rapid growth. Our team is motivated by building systems that have a direct, meaningful impact on people's lives and by scaling the future of logistics. We are seeking people who sculpt from first principles, enjoy facing adversity, and can do the impossible at record breaking speeds. The Role Does aggressively tackling cross disciplinary projects from early conceptual stages through to full field deployment sound like the way you want to spend your time? Do you eliminate circular discussions by running a test or use your hands-on skills to build a prototype instead of scheduling another meeting? At Zipline, your work is intended for the field, where customers are counting on it every day, so there is no time for ambiguous communication or unrealistic expectations. We need dedicated engineers to burn down risk and improve reliability in our system like their life depends on it– because others' lives do. If you thrive working with a fast-paced and driven team that focuses on only the most important goals, eliminates blockers, and executes with extreme practicality, keep reading! Mechanical Engineers at Zipline go deep in their area of ownership, become experts in the problem domain, define requirements for their systems, rapidly develop creative and simple solutions, and prove with testing that their system meets the rigors and edge-cases of real-world deployment. We are composed of teams that are responsible for everything from the earliest designs of a new system, to creating test and validation strategies, root-causing issues with existing systems, and much more. What You'll Do • Mechanical interns can own a variety of big problems integral to our system! You can expect to:, • Take product and engineering requirements to develop concepts and evaluate tradeoffs for each, • Use 2D and 3D CAD tools to design parts and assemblies based on sound engineering principles, • Use resources creatively to design, build, and test prototypes to gather quick learnings, • Work cross-functionally with other Zipline teams and suppliers to review designs, • Design, build, and run electro-mechanical testers that you develop to prove reliability of critical components, • Evaluate designs and components on a material, element, and fully integrated product level, • Root cause failures and develop a test to replicate the failure mode, • Document your work so that others can easily understand key decisions made, • Examples of previous intern projects include designing, building, testing, and running:, • flexible blind-mate ducting connection between an aircraft and a ground-based cooling station, allowing for aircraft battery temperature regulation during charging and pre-flight preparation, • a service strategy for removing a docked aircraft from a ground station using a custom designed hand cart, complete with an ergonomic study for a range of technician heights and strengths, • a communications tower with integrated antennas and lightning protection meant to relay vital telemetry information from the drone to the operators during flight, • characterization of proposed and delivered materials, and properties (static strength, durability, and dynamic response) of configured structures, • a wing cycle tester to identify and eliminate risk for each wing iteration and prove reliability with cyclesWhat You'll Bring The most critical skill we've seen in prior entry-level candidates is robust experience designing and actually building multiple mechanical systems outside of the classroom. This is the component of your application we're most excited about, so please ensure that you've included this work in your application. Examples of things previous interns have built include submarines, solar cars in the Australian outback, electric boats and airplanes, rockets, etc. • You must have completed at least the second year of your Undergraduate studies. Masters and PhD students are also eligible., • You'll bring solid mechanical engineering fundamentals for structural analysis, sizing parts, and integrating components into a design with minimal help, • You'll bring automation experience from working with actuators and Raspberry Pi's (or similar), • You're well versed in CAD, and have designed multiple projects with it, • You've worked on complex projects that require mechanical, electrical, and software design, • You're quick to change direction when you realize you've made a mistake OR could achieve the same goal in a simpler way, • You bias to action and communicate consistently with your team to ensure everyone is focused on meeting the project goals on time, • You're excited to build on your design skills with brainstorms, design reviews, and failure mode analysis, • You can anticipate, plan and schedule your own work, • You bring a "can do" attitude, because we have a lot of vital work to get done and only work with people who are invested in solving critical problemsWhat Else You Should Know Our internships are full-time positions, in-person at our South San Francisco or Dallas office. We will host our Fall 2026 interns from September to December. Candidates are limited to three (3) applications within a 30-day period. Zipline is an equal opportunity employer and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws or our own sensibilities. Zipline is also committed to providing reasonable accommodations to individuals with disabilities. Please let your point of contact at Zipline know if you require any accommodations throughout your interview process.

Job DescriptionWe are looking for a Development Engineer to provide comprehensive engineering support for our distributed energy and microgrid projects. Our projects typically include managing a variety of DER and microgrid assets – such as solar, energy storage, controls, and reciprocating engines. This role will report to our Manager of Development Engineering and will be a hybrid role based out of our Oakland, CA, or Santa Monica, CA offices.Key responsibilities will include: • Create electrical and physical designs for microgrid and DER systems, accounting for existing electrical infrastructure, AHJ requirements, and other site constraints., • Utilize your strong technical and communication skills to identify and communicate technical constraints and possibilities to other internal and customer stakeholders., • Work extensively with our Business Development (BD) teams to evaluate and develop the right technical solutions., • Work with the BD, execution, and commercial teams on specific projects to ensure the Microgrid integration is technically sound, practical, and cost-effective. This includes working with existing service entrance one-line drawings or creating new ones to provide the best design interface for functionality and cost., • Investigate the interconnection, which includes submitting interconnection applications and completing modifications to existing design concepts that are applicable to each site., • Work with switchgear manufacturers (and other OEMs) like Schneider Electric to ensure switchgear designs meet project requirements, including site constraints and utility requirements, within cost and schedule constraints. This includes working at voltage levels of 34.5kV, 23kV, 13.8kV, 4160V, 480V, and 208V, depending on site and system size., • Provide significant input to the solar, battery, and generator designs to optimize performance, reliability, and sustainability for each customer site., • Collaborate with the rest of the development engineering team, as well as other internal stakeholders, to continually improve templates and processes and enable continuous improvement.The Ideal Candidate, • 2+ years of experience in the design and construction of power/generation/renewable energy projects., • Thorough technical understanding of distributed energy technologies, including some combination of solar, battery, and reciprocating engines/turbines., • An understanding of rotating power with reciprocating engines in the 200 to 2000kw size range per engine is preferred., • Understanding of onsite power generation, including parallel operation with the utility bus as well as with other DERs, both in grid parallel mode and island mode operations., • Solid understanding of the utility side of the interconnection., • Knowledge of the various DER power sources within the Microgrid and how they best interface with the utility to provide a more efficient system., • Knowledge of emissions from the utility side, as well as each of the DERs., • Knowledge of systems controls for the DERs and how they can be utilized to accomplish specific operating goals while part of the Microgrid. These goals provide economic return to the customer and us., • Strong communication skills, including the ability to communicate with technical and non-technical people to make projects work., • A BS in Electrical Engineering is required; a focus on the power side is preferred., • PE in power or progressing towards that license is preferred., • Advanced courses in power or a higher-level degree in the field are preferred.This is a great opportunity to have a long-term impact on a fast-paced, private equity-backed growth business. Some of the core virtues embraced by Scales’ employees include: · Do the Right Thing· Act Like an Owner· Hustle· Demand Results· Go Together· Evolve or Disappear We offer a competitive compensation package and a comprehensive benefits program including medical benefits, paid vacation and holidays, and 401K matching. About Scale Microgrids Scale is redefining resilience, with advanced microgrids that go beyond traditional backup power solutions to give businesses the power to adapt and thrive amid all of today’s growing energy challenges. As a vertically-integrated provider of turnkey advanced microgrid systems, Scale combines project design, engineering, and execution expertise with microgrid-as-a-service financing to offer our customers systems that are optimized to deliver maximum value from day one while ensuring ultra-reliable operations and fast time-to-power. Scale is backed by EQT, a firm with ~$250B in assets, bringing a depth of experience, resources, and capital that will enable Scale to continue pursuing our vision of powering the world with distributed energy. The investment enables Scale to own and operate billions of dollars in distributed generation assets. To learn more about Scale Microgrids, please visit https://www.scalemicrogrids.com. About EQTEQT is a leading purpose-driven global investment organization with EUR 246 billion in total assets under management, divided into two business segments: Private Capital and Real Assets. EQT owns portfolio companies and assets in Europe, Asia Pacific, and the Americas and supports them in achieving sustainable growth, operational excellence, and market leadership. To learn more about EQT, please visit https://eqtgroup.com. Scale strives to attract and retain a workforce that reflects the composition of our customer base and communities. We are committed to providing a work environment that provides everyone with equal access and opportunity to contribute and drive meaningful outcomes. We encourage applicants from all backgrounds to apply and will consider qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout Terawatt Infrastructure The once in a century transition to autonomous and electric vehicles is underway and will require a multi-trillion-dollar investment in energy and charging infrastructure, and the real estate to site it on. Terawatt is the leader in delivering large scale, turnkey charging solutions for companies rapidly deploying AV and EV fleets. Whether it’s an urban mobility hub, or a carefully located multi-fleet hub for semi-trucks, Terawatt brings the talent, capabilities, and capital to create reliable, cost-effective solutions for customers on the leading edge of the transition to the next generation of transport. With a growing portfolio of sites across the US in urban hubs and along key logistics and transportation corridors and logistics hubs, Terawatt is building the permanent transportation and logistics infrastructure of tomorrow through a robust combination of capital, real estate, development, and site operations solutions. The company develops, finances, owns, and operates charging solutions that take the cost and complexity out of electrifying fleets. At Terawatt, we execute humbly and with urgency to provide tailored solutions for fleets that delight our clients and support the transition of transportation. Role Description:One of Terawatt’s Core Values is “Electrify the Customer.” Terawatt is seeking an Electrical Engineer to help design and deliver reliable, high-performance EV charging solutions across North America. This role plays a key part in shaping the electrical strategy for Terawatt’s charging stations and ensuring efficient, scalable site design. In this role, you will contribute to strategic electrical system analysis, submittal reviews, preliminary single-line diagram development, and utility coordination. You will collaborate with utility partners and vendors to deliver power efficiency solutions using both established and emerging technologies. You will work closely with the Head of Hardware & Electrical Systems, the SVP of Technology, EVSE Validation Engineers, and a Senior Electrical Engineer, while partnering cross-functionally with software, data, development, construction, energy, and operations teams. This position is central to delivering a high-quality charging experience for fleet customers. The team ensures that Terawatt’s selected charging systems achieve high uptime while providing a seamless customer experience. If you bring experience in EVSEs and high-powered electrical systems, this role offers an opportunity to contribute meaningfully to transportation electrification and the reduction of greenhouse gas emissions.Core Responsibilities • Work with the Development, Construction, Energy teams to implement electrical hardware and utility partner requirements closely, • Work with Technology team to help determine hardware partners for Terawatt’s charging sites, • Execute strategies for interoperability for our different EVSE partners and the vehicles that will use our charging infrastructure, • Work with Field Service to help resolve hardware and electrical-related problems for Terawatt's fleet customers, • Work on existing and upcoming standards engagements and compliance, • Assist Sr. team members identify new solutions to improve the efficiency of our sites, • Manage engineering outputs for multiple projects with competing deadlines and resources, • Report to management regularly on engineering progress and setbacks, • Research, obtain, and apply critical design information including building and electrical code requirements to site design, • Be an advocate for the electrification of transport, and the Company’s role in making it happenMinimum Qualifications, • Background in electrical engineering, power electronics, or comparable practical experience, • 4+ years experience in dense electrical infrastructure, such as: DC fast EV charging infrastructure, Clean energy electrification (BESS, solar, wind, geothermal, nuclear, etc.), Data center power distribution, Power grid development, Substations and Microgrids, Solid state power transformation, • Demonstrated initiative and a collaborative approach to solving complex challenges in an evolving industry with the ability to manage technical deliverables for multiple simultaneous projects, maintaining high quality under aggressive "speed-to-market" timelines, • Proficiency in developing and reviewing Single-Line Diagrams (SLDs) and Three-Line Diagrams using AutoCAD, Bluebeam, or similar engineering software, • Deep familiarity with the National Electrical Code (NEC) and local building codes relevant to EV infrastructure, • Demonstrated experience managing utility interconnection applications and navigating the technical requirements of utility service providersPreferred Qualifications, • 2+ years experience in the EV ecosystem, vehicle electrification, EV charging infrastructure, or related fields, • Hands-on experience in construction oversight, commissioning, or field engineering, specifically troubleshooting hardware to vehicle interoperability, • Familiarity with understanding of dispatchable on-site power generation, solid state transformers, substation relay and control and other aspects of power distribution systems, • Understanding of industry standards such as OCPP (Open Charge Point Protocol) and ISO 15118 (Plug & Charge), • Knowledge of construction and electrical safety practices and procedures, • EIT (Engineer-in-Training) status or a Professional Engineer (PE) licenseCompensation for this role is determined by several factors, including the cost of labor in specific geographic markets, and these ranges are intended to provide a helpful reference. The actual compensation offer will be based on the candidate’s location, skills, level of expertise and experience, and internal equity considerations. In addition to base salary, we offer a comprehensive benefits package and, where applicable, performance-based incentives.We are building a team that represents a variety of backgrounds, perspectives, and skills. At Terawatt, we continuously strive to foster inclusion, humility, energizing relationships, and belonging, and welcome new ideas. We're growing and want you to grow with us. We encourage people from all backgrounds to apply.If a reasonable accommodation is required to fully participate in the job application or interview process, or to perform the essential functions of the position, please contact people@terawattinfrastructure.com. Terawatt Infrastructure is an equal-opportunity employer.

Job DescriptionDescription: About GRID Alternatives GRID Alternatives is a national leader in making clean, affordable solar power and solar jobs accessible to low-income communities and communities of color. GRID is an entrepreneurial, high-growth non-profit organization that provides direct solar installation and project development; clean mobility options; workforce training and service-learning opportunities; and low-income solar policy advocacy. Our Vision: a rapid, equitable transition to a world powered by renewable energy that benefits everyone. Our Mission: to build community-powered solutions to advance economic and environmental justice through renewable energy. What it's like to work at GRID… At GRID, we care about each other and know that each employee has a whole self that includes life outside of work. Our culture supports learning, growth and well-being of all of our team members. Summary of the role: The Senior Commercial Design Engineer is a senior individual contributor role within GRID Alternatives’ commercial design team, reporting to the Commercial Design Manager. This position plays an important role in delivering high-quality, code-compliant designs for multifamily and light commercial projects, with most systems in the 50 kW–500 kW range. Rooftop solar is the core scope of this role, with additional opportunities to work on carport solar, battery-enabled microgrids, and EVSE infrastructure as GRID continues to diversify and expand its commercial portfolio. In this role, you’ll collaborate closely with other senior designers, junior designers, project managers, construction staff, and development teams to support design development, costing and estimating, and project execution. You’ll contribute technical expertise throughout the project lifecycle while also helping improve design standards, tools, and processes as the program grows. This role is ideal for an experienced commercial solar designer who enjoys solving complex technical problems, working collaboratively across teams, and contributing to a thoughtful, mission-driven organization. Job Duties include, but are not limited: • Produce complete design packages for utility and AHJ submittals for commercial solar and solar-plus-storage projects, generally ranging from 50 kW to 500 kW, • Develop CAD layouts, electrical diagrams, stringing plans, calculations, elevations, details, and bills of materials based on project requirements, • Support early-stage project development through technical input for project costing and estimating, • Serve as a key technical resource within the commercial design team, assisting with design questions, code interpretation, and troubleshooting, • Perform quality assurance reviews of colleagues’ work to ensure accuracy, constructability, and code compliance, • Clearly communicate design intent, assumptions, and constraints to internal teams and external partners, including project managers, construction teams, utilities, and AHJs, • Provide technical guidance and mentorship to junior designers through reviews, feedback, and informal training, • Contribute ideas and feedback on design standards, templates, tools, and workflows in partnership with the Commercial Design Manager and peers, • Coordinate with external engineering vendors as needed to support project deliveryRequirements: Technical experience • 5+ years of experience designing grid-tied commercial and/or multifamily solar projects, including solar-plus-storage, • Deep understanding of commercial PV system design, component selection, and production modeling, • Strong proficiency in AutoCAD and Excel, with experience using tools such as HelioScope, Aurora, PV Watts, NREL SAM, PVsyst, or similar, • Experience producing utility- and AHJ-ready plansets, including calculations, details, and as-built documentation Collaboration & communication • Ability to clearly explain technical concepts and design decisions to a range of audiences, • A collaborative working style that values shared problem-solving, consensus-building, and alignment across disciplines, • Comfort giving and receiving feedback in service of team goals and project outcomes Quality & judgment • Strong attention to detail and a quality-focused mindset, • Ability to exercise sound technical judgment while working within established standards, processes, and decision frameworks, • Growth & mindset, • Curiosity and interest in improving tools, templates, and workflows, • Openness to feedback from peers, construction teams, and managers, • Interest in mentoring and supporting junior designers as part of a collaborative team Compensation: The compensation range for this fulltime, exempt position is $90,000-$100,000. The base pay that will actually be offered will vary depending on job-related knowledge, skills, location, experience and take into account internal equity. Benefits: Medical, Dental, Vision/Eye Care insurance, 5 weeks paid time off (PTO),13 paid holidays, Commuter Checks, 403b Retirement Plan, Employee Assistance Program (EAP), Flexible Spending Account (FSA), Health Savings Account (HSA), STD, LTD, and AD&D insurance Where you will sit & the places you may go… The ideal candidate will sit in the United States (remote). This position may require up to 25% out-of-town travel to regional offices and special projects such as org-wide celebrations, team building exercises, etc. Availability to work nights and weekends may very rarely be required. GRID Alternatives may provide vehicles for work travel and/or travel reimbursement for personal vehicle use. In this instance, applicants must hold a valid driver’s license and have a good driving record. Important to note for California applicants: **Hired CA candidates must be able to pass a screening for drugs that are illegal in the state of California, including: amphetamine, cocaine metabolite, opiates, and PCP. Reasonable Accommodation for Job Seekers with a Disability: If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to: RECRUITING@GRIDALTERNATIVES.ORG Ready to Apply? Submit a resume describing your interest. Due to the high volume of inquiries, mailed and emailed applications are not accepted. GRID Alternatives provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, disability or genetics. Because we value EID at GRID Alternatives, we encourage folks from all backgrounds to apply, even if you do not meet all of the preferred qualifications. Every member of GRID Alternatives must be dedicated to participating in the organization's equity, inclusion, and diversity (EID) work.

Job Description Solar Sales Business Development - Commercial & Multifamily This is primarily a hybrid position working remote, meeting customers and prospects with occassional onsite meetings at the NorCal office. Must be located in Northern California. Company: Our client is a well-established solar company with a fantastic reputation for excellent service and on-time project completion. Opportunity: We are currently seeking a dynamic Commercial/Multifamily Solar BDM, a proven relationship builder, and hunter. The successful Commercial Solar Sales Business Development Manager will drive and manage multifamily/commercial solar projects throughout the Northern California region. The ideal candidate will have a strong background in solar energy sales and a proven track record of developing new business opportunities with commercial and multifamily building owners, developers, and general contractors. Target project sizes range between 100kW to1MW, new construction. The Commercial BDM will manage the entire sales cycle, from lead generation to contract negotiation and handover to construction. Responsibilities: • B2B Sales. Identify, generate, and pursue sales leads for commercial and multifamily solar projects throughout Southern California., • Engage with customers and other relevant trade partners as the main point of contact during the projects. Develop and nurture relationships with key stakeholders, including property owners, developers, general contractors, project managers and decision-makers., • Generation of leads and maintaining close client relations, responsible for finding new leads and knocking on doors., • Own and drive all commercial and large-scale multifamily apartment projects, including carports., • Create and present compelling solar and roofing packages for potential clients., • Organize and host lunch-n-learns with architects, builders, GCs, and other stakeholders., • Collaborate with sales engineering and design to develop customized solar solutions., • Collaborate with internal teams, including estimating and project management, to ensure smooth project execution., • Stay involved throughout the execution phase and ensure the customer is content., • Analyze market trends and identify new opportunities in the commercial solar sector., • Achieve and exceed sales targets and revenue goals. Present progress regularly., • Attend trade shows and industry events to generate leads and build relationships. Qualifications: • Must have direct solar sales experience in NorCal with the proven ability to build and maintain close client relationships for new and repeat business., • Minimum of 5+ years of commercial and/or multifamily solar photovoltaic (PV) successful solar sales records with a focus on commercial projects. Ideal candidate will have B2B new construction carport and multifamily experience., • Bachelor’s degree in business, engineering, or a related field preferred., • Must have excellent communication, presentation, and negotiation skills with a team player attitude, working with cross-functional teams., • Go-getter, can-do attitude, willingness to roll up sleeves, hunt, and knock on doors to find B2B leads. Willingness to hit the road constantly in Northern California to cover large sales territory and client base as needed., • Must have a commitment to excellent customer service, high ethics, and integrity., • Must have strong problem-solving skills, • Proven ability to multitask while meeting deadlines and keeping projects within budget, • Must have strong organizational and record-keeping skills, • Knowledge of commercial and residential building codes - AHJ, • Solid understanding of Title 24 solar requirements. Knowledge of multi-family PV interconnections as well as Virtual Net Energy Metering (VNEM) and NEM, • Knowledge of 3-phase electrical system, • Knowledge of commercial solar equipment, including panels, racking, inverters, and batteries, • Knowledge of all system types: tilt and flat roof mount, ground mounts, carports, ballasted, and hybrid systems, • Knowledge of electrical code, • Strong understanding of finance, solar billing, and CA regulations, • Hands-on experience with CRMs such as Salesforce, tracking leads, and sales is preferred. Experience working with Helioscope and Energy Toolbase is highly desired. Benefits: • Medical, Dental, Vision, 401(k), • Vacation and holiday pay Compensation: Salary DOE plus generous commission. The compensation listed below is salary plus bonus. Negotiable for the right candidate

Job DescriptionMantis Innovation provides managed facility services and turnkey program management with technology-enabled solutions that target the entire building footprint. We look at the entire facility—inside and out—and can impact 70% of what a building operator allocates critical budget dollars toward, including: Strategic electricity and natural gas procurement, renewable energy, and demand response; climate impact reduction and reporting, net zero strategies, and sustainability planning; roofing, solar, HVAC assessment management, pavement, building envelope, data center optimization, and EV charging; lighting/LED retrofits, HVAC/mechanical systems, and BMS/BAS improvements and implementation. This role requires either permanent relocation to one of the following locations listed below (relocation assistance provided) or the ability to travel frequently from your location (50%+ travel annually): • Umatilla, OR (Urgent need), • Seattle, WA, • Chicago, IL, • Raleigh, NC, • Pittsburgh, PA, • Reno, NV, • Ashburn, VA (Urgent need) Build something that matters—with people who trust you to own outcomes and deliver exceptional results for customers. Join us at Mantis Innovation where authentic people show up as themselves, take real ownership, and are trusted to do what’s right—for the business and the customer. Our culture is rooted in Tenacity, Excellence, Accountability, Curiosity, and Humility, and it shows up in how we work, collaborate, and deliver results that matter. WHY THIS ROLE • Starting salary: $100,000++++, • Annual bonus: Up to 10%, based on individual and company performance, • What sets us apart? A BMS Bonus Program that rewards ownership, business results, and customer impact, • Growth-focused: Ongoing training to develop both technical expertise and leadership capability WHO YOU ARE • Curious, driven, and focused on delivering strong outcomes, • You ask smart questions, dig into challenges, and continuously improve how work gets done, • You want your ideas to matter—and to be trusted to deliver the best results for the customer WHAT YOU’LL DO • Install, program, commission, and troubleshoot BMS/controls systems, • Partner with project teams to deliver high‑quality, reliable solutions, • Own system performance and ensure customers consistently receive exceptional results, • Depending on your location, travel approximately 40-50% throughout the year to support projects and customers around the USResponsibilities, • Service of existing building control systems., • Startupof complete building control systems., • Install building control components(controllers, panels, conduit, sensors, etc.), • Low voltage control panel building., • Work closely with our installation subcontractors and coordinate work with them to ensure projects are completed on time as per code, standards and contract requirements., • Perform a point-to-point checkout per standard procedures., • Perform software/hardware calibration required for proper equipment and system operation., • Perform low voltage cable installation/termination for small projects if needed., • Take on project commissioning activities to include daily meetings and documenting results. Qualifications, • Ability to own a task from beginning to end. Effectively communicating progress and/or issues about assigned task., • Can work both independently and as a part of a team., • Must be able to multi-task, it is very probable you will be assigned multiple tasks over multiple customers at any given time., • Basic proficiency in Microsoft suite (Word, Outlook, Visio, Excel, PowerPoint), • Can read schematics (network topologies, electrical one-lines, device wiring drawings, control drawings, etc...), • Familiarity with CAD, construction drawings, • Strong understanding of open protocols (For Example... BACnet IP/BACnet MSTP/Modbus TCP/Modbus RTU), • Knowledge of terminating wire to terminal blocks to include RS-232, RS-485 and CAT 5/6, • Troubleshooting skills, the ability to understand a problem and work toward reasonable solutions, • Maintain proper understandings of code requirements for indoor and outdoor electrical infrastructure, and knowledge of handling higher voltage (120, 240, 480V) for controls purposes, • Basic networking, ability to manipulate pc settings to access, set up and commission devices on a network., • Ability to visit job construction hard hat areas and climb stairs, climb ladders, maneuver in and around pipework and air ducts and work safely near exposed line voltage and low voltage wiring and terminations., • Possess valid state motor vehicle license and possess safe driving record as required by company’s insurance carrier., • Able to pass State and Federal security screening., • Out-of-state travel will be required depending on your location (estimated to be between 50%+ throughout the year if you are not located in one of the cities listed above), • Understanding of Mechanical and Electrical equipment in a typical Data Center application Location Qualifications, • Chicago requirement: At least 5+ strong years of hands-on experience with BMS software, Tridium Niagara/Distech is required, • PNW (Seattle and Umatilla) requirement: PLC/SCADA Ignition experience, • All other locations: Experience with BMS software; Tridium/Distech is preferred. Must understand wire sheet programming and logic. The above pay range is Total Cash; a combination of base salary (dependent upon experience/Tech level) and additional bonus potential through internal programs (annual bonus, living expenses, profit sharing)This role is open to and may offer additional compensation in the form of relocation assistance to candidates willing to relocate permanently. The total cash range above also depends on the location you choose to relocate to. Note: Employees are held accountable for all duties of this job. This job description is not intended to be an exhaustive list of all duties, responsibilities, or qualifications associated with the position. What else can we offer you?We offer a fantastic lineup of benefits, including Medical, Dental, Vision, FSA, HSA, 401k Matching, Paid Vacation, Paid Sick, Paid Holidays, Paid Parental Leave, Paid Short Term & Long Term Disability, Tuition Reimbursement, and a flexible hybrid work schedule (for office-based employees). Working at Mantis also brings tremendous professional development opportunities that allow you to make a real impact on both the company and your career! Not sure you meet every single requirement?Studies show that women and individuals from underrepresented groups often hesitate to apply unless they check every box. At Mantis, we’re committed to building an inclusive and equitable team—so if this role excites you, we’d love to hear from you, even if your experience doesn’t match every single qualification. Mantis Innovation is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Location: San Francisco, CA (Hybrid) What is Verse? Energy markets are more volatile than ever. Rapid electrification and the rise of AI are driving unprecedented demand for power, while energy costs continue to rise across the globe. For the world's largest energy buyers, managing energy has never been more complex or more critical. Verse helps these organizations manage complex power portfolios with confidence by unifying energy data, planning, forecasting, and operations in one tool. Our Energy Cost Intelligence platform, Aria, brings together energy, finance, and operations teams with real-time, finance-ready intelligence—replacing spreadsheets and consultants with precision across the entire energy lifecycle. Built by an expert team of energy buyers, data scientists, and engineers, Verse enables faster, smarter energy decisions that reduce risk and lower energy costs. The Role Verse is building a real-time control platform that dispatches distributed battery fleets to maximize revenue across energy markets. We're looking for a Product Manager who will own the operational backbone of this system: the layer where software meets physical hardware, where commands travel from the cloud to a battery inverter and telemetry flows back, and where uptime guarantees matter. You'll work across two pods: Fleet Telemetry & Control (device integration, real-time site controllers, OEM protocol translation, and local safety logic) and Site-to-Cloud Integration (the communication, configuration, and dispatch infrastructure that connects edge devices to cloud optimization). Your surface area spans Modbus device mapping across multiple OEMs (Tesla, Sungrow, Fluence), site-local control loops for export limits, demand management, and solar ITC compliance, telemetry ingestion pipelines, alarm management, config synchronization, and the dispatch path that translates cloud-optimized schedules into real-time battery behavior. You'll need to understand what happens when a meter times out, when a site loses cloud connectivity for 24 hours, or when a BESS OEM ships a firmware update that breaks your control interface. Key Responsibilities • Own the product roadmap for fleet telemetry and site-to-cloud infrastructure – spanning OEM device integration (Tesla, Sungrow, Fluence), real-time site controllers (net export limits, demand management, solar ITC, safety shutdown), telemetry ingestion, alarm management, and cloud-to-site dispatch execution., • Define requirements for site-local control logic and edge computing, including offline mode behavior, local schedule caching, meter timeout handling, and graceful degradation when cloud connectivity is lost., • Drive the OEM integration strategy across BESS manufacturers and meter hardware defining device mapping standards, polling configurations, and site topology management for increasingly complex multi-device installations., • Own the site-to-cloud communication layer – config synchronization, dispatch scheduling, fleet health monitoring, and end-to-end observability from command issuance through battery execution and telemetry confirmation., • Partner closely with the UI Product Manager to translate 24/7 fleet management workflows into product requirements for commissioning tools, alarm triage, urgent shutdown, and dispatch monitoring., • Work with Engineering to scope and prioritize across both pods, making trade-off decisions between new OEM support, reliability improvements, scale readiness, and feature delivery against contractual UAT milestones. What We're Looking For (Minimum Qualifications) • 4+ years of product management experience on real-time, embedded, or industrial control systems. You've shipped software that talks to physical hardware and have dealt with the reliability, latency, and integration challenges that come with it., • Direct experience with device communication protocols and the messy realities of integrating across multiple OEM vendors with different APIs, firmware versions, and data formats., • Strong technical foundation in distributed systems, edge computing, or IoT infrastructure. You understand site-to-cloud architectures, VPN/network configuration, data buffering, and what it takes to keep remote devices reliably connected and controlled., • Comfort operating in a high-stakes, operationally critical environment where uptime matters – you've worked on systems where failures have real-world consequences and you know how to think about failover, graceful degradation, and alarm management., • Excellent communication skills with experience writing technical PRDs, coordinating across hardware and software teams, and engaging with customers or operations teams who are using the system in production. What Will Make You Stand Out (Preferred Qualifications) • Direct experience in battery energy storage, microgrids, or distributed energy resource management systems (DERMS). You know what a net export limit is, why solar ITC compliance matters, and how demand charge management works., • Experience building products that operate across edge and cloud with real-time dispatch or control loops – robotics, autonomous vehicles, industrial automation, or fleet management systems., • Familiarity with AVEVA/OSIsoft PI, utility SCADA integration, or market access provider APIs (e.g., Enel, PJM) for grid services dispatch., • Background in site commissioning, field operations, or NOC workflows – you've seen what it's like to bring a site online and keep it running., • Experience working against contractual acceptance testing (UAT) milestones with enterprise or utility customers where delivery timelines are not negotiable., • Technical degree (Electrical Engineering, Computer Science, Mechatronics, or similar) or equivalent hands-on experience with control systems. What makes Verse a great place to work? Lead with Empathy: We lift each other up with humility and kindness, always putting colleagues and customers first Be Honest & Transparent: We prioritize effective communication to build trust with our team, customers, and stakeholders Move with Balance & Precision: We believe speed and perseverance must be accompanied by thoughtfulness and reflection Leave the World a Better Place: We are passionate about our mission, and we strive to create a sustainable world for future generations Base Pay Range $130,000-$200,000 This is the estimated base salary range for this position, which does not include the value of benefits or a potential equity grant. A wide range of factors are considered in making compensation decisions, including but not limited to skill sets, market conditions, experience and training, licensure and certifications, and business and organizational needs. Benefits and Employee Perks • Competitive compensation and equity grant at a high-growth start up, • Comprehensive benefits package including medical, dental and vision insurance, and 401k, • Flexible hours and unlimited PTO, • Diverse and inclusive working environment Verse is an equal opportunity employer. All applicants and employees are considered for hire, promotion, and compensation without regard to race, color, religion, sex, national origin, age, disability, sexual orientation, marital or familial status.

Job DescriptionSalary: dcbel Inc. (www.dcbel.energy) designs and sells residential products to make clean, efficient, and sustainable energy accessible to all because everyone in the world deserves energy without compromise. dcbel is at the leading edge of the residential energy revolution. Its products enable decentralized energy consumption and production through its vertically integrated suite of energy hardware and software products, and their supporting infrastructure. Our flagship product, dcbel Ara, is a Home Energy Station that gives everyone ownership over their energy supply by using solar power to charge their EV and power their home, unlocking their EVs battery for blackout protection, backup power (V2H) and grid services (V2G), and optimizing the energy flow between their solar panels, EVs, stationary battery and the grid. The opportunity dcbel is looking to hire a Field Engineer - Residential Energy to work in dcbel's Revenue Team. Successful candidates will play a pivotal role in enabling installer channel sales by accelerating the scale up of dcbel's installer network by having technical training directly in the field, all over Canada and US (East coast) wherever installer customers may be located. Main responsibilities • Enable installer channel sales, • Provide on-customer premise training of new installers during onboarding, • Provide technical support during installer sales outreach, • Provide ad hoc technical support during demonstrations and in other partner channels as required Key requirements • Bachelors in Engineering from top tier universityor equivalent., • Demonstrable hands-on field experience supporting selling and installing of new/innovative product in the residential and/or energy and troubleshooting, • Working knowledge of Canadian and US electrical code, • Working knowledge of power electronics;, • Working knowledge of IoT communication protocols Profile • Some knowledge of EV charging communication protocols (ISO 15118) and DER integration protocols (IEEE 2030.5, OpenADR) are a strong plus;, • Entrepreneurial mindset, result oriented and strong EQ., • Great communication and presentation skills, • Ability and willingness to travel; 85%+ in Canada and in the US What's in it for you • Full benefits package including Health insurance, virtual healthcare, employee stock options plan, and more., • Be part of a company that is backed by numerous globally respected investors and has world-changing patents in an industry changing for the first time in history., • Grow your professional experience amongst blue chip partners and a close-knit team of committed and experienced energy experts who deeply care about the work they do., • Parking is available onsite or with our employer commute program a short walking distance from Metro Namur.

Job Description Job Title: Staff Reliability Engineer Location: Burlingame, CA Department: ESS Engineering Reports To: Staff Reliability Engineer Position Type: Full-time About Peak Energy Peak Energy is the first American venture to advance globally proven Sodium-Ion battery systems as the storage standard for the new era of renewable energy on a resilient grid. Sodium-Ion is cheap, readily available and safe, making it the leading contender in a rapidly evolving market. Our leadership team is powered by decades of expertise in scaling gigawatt-level innovation at world-class companies such as Tesla, Northvolt, Apple, Powin, Enovix, Zipline, Solid Power, and Fluence. We are backed by strategic investment and product partners such as TDK Ventures and Eclipse Ventures. We are a team of engineers, operators, entrepreneurs, and partners driven by a shared ambition to set the new performance standard for renewable energy and grid resilience. About the Role – Staff Reliability Engineer Peak Energy is looking for a Staff Reliability Engineer to help scale ESS hardware reliability with a focus on HV electronics, devices, and power conversion. You will work cross-functionally to realize industry-leading reliability across all aspects of the product life cycle, from concept development through field deployment. This role sits at the intersection of design, testing, manufacturing, and field operations — with direct influence on architecture decisions and reliability outcomes that matter most. You will creatively apply reliability expertise in a fast-paced, hands-on environment where your work has immediate and measurable impact. The ideal candidate brings deep technical expertise, a proactive ownership mindset, and the ability to think critically and act decisively in a dynamic startup environment. What You'll Do • Take independent DfR ownership for existing subsystem reliability and a lead DfR role for future products, with a focus on HV electronics, devices, and power conversion, • Fully develop reliability test programs (DV, PV, ORT) by leading DFMEA, defining mission profiles, analyzing test acceleration, and specifying test requirements, • Build and contribute to custom Python reliability analysis and modeling tools to automate workflows for life prediction, test design, test/field data, and reporting, • Define reliability requirements and acceptance criteria at key program milestones and clearly communicate risk and reliability confidence to engineering leadership, • Develop physics-of-failure lifetime models and close the loop by performing failure root cause analysis and statistical analyses of test and field reliability data, • Partner with the SIE team and suppliers to verify component quality by overseeing outsourced testing and defining qualification and inspection requirements, • Collaborate across all teams to embed DfR principles into engineering decisions throughout the product cycle, including early architecture decisions, manufacturing process development, and cost-down projects What You'll Bring • Bachelor's or master's degree in Electrical Engineering, Mechanical Engineering, Reliability Engineering, Materials Science, or a related field, • 5+ years of experience in hardware reliability engineering in power electronics, high-voltage systems, or consumer electronics, • Strong understanding of reliability engineering principles including statistics, data analysis, physics-of-failure, lifetime prediction models, accelerated life testing, and DFMEA, • Demonstrated ability to independently lead product reliability through multiple stages of development, • Proficiency using statistical analysis tools in Python or equivalent for modeling and data analysis, • Strong documentation and technical communication skills — able to clearly present findings and reliability principles to cross-functional and leadership teams, • Ability to think critically and act decisively to efficiently grow reliability confidence in a fast-paced startup environment Preferred Qualifications • Direct reliability experience with high voltage batteries, DC-DC converters, inverters, battery management systems, or PV solar products, • Hands-on experience designing, executing, and reporting complex electromechanical reliability tests (HTHE, PTCE, HTOE, HALT, vibration, corrosion), • Experience with PCBA failure analysis tools such as SEM and X-ray, • Experience using DOEs, accelerated life testing, and field failure data to develop physics-based models for design margin analysis and lifetime failure prediction Peak Energy is committed to building a diverse and inclusive workforce. We strongly encourage women, people of color, and individuals from underrepresented groups to apply. We value skills, potential, and perspective over specific credentials. If you're excited about this role but your experience doesn't look perfect on paper, we still want to hear from you. Our Core Values • Speed Through Focus – Move fast but understand why. Focus on the goal, don't sacrifice quality., • Mission Over Self – It's about the greater good; confident humility. Take ownership and accountability., • Face the Brutal Truth – Transparency, honesty, big picture curiosity. Fearless decision making., • Be a Good Person – Kindness, collaboration and teamwork. Compensation & Benefits The salary range for this role is $180,000–$230,000, with actual pay varying based on work location, experience, and skills. Our competitive benefits package includes: • Flexible time off, • Comprehensive medical, dental, and vision coverage, • Strong 401(k) plan, • Equity opportunities, • Many great work perks Join us to thrive in a supportive environment while making a meaningful impact in the energy sector! At Peak Energy Technologies Inc., we believe that a diverse and inclusive workplace makes us a more capable, innovative, and competitive company. We welcome people who represent diversity in their backgrounds, ethnicities, cultures, and experiences. Peak Energy Technologies Inc. is an equal opportunity employer, aiming to reach our company's full potential by cultivating an inclusive workforce. We do not discriminate on the basis of race, color, ancestry, religion, national origin, sexual orientation, citizenship, marital or family status, disability, gender identity or expression, veteran status, or any other legally protected status.

Job DescriptionRegional Sales Manager West - Lighting We are working with a fast-growing manufacturer at the forefront of sustainable infrastructure. This team is passionate about solar LED technology and has established a global footprint with a sales network covering over 40 states, Mexico, and Central America. Their specialized catalog features cutting-edge solar-powered and hybrid grid-backup lighting solutions. We are seeking a high-energy sales executive who excels in the electrical distribution channel. This role is for a motivated professional who builds long-lasting customer loyalty and is ready to dominate a vast Western U.S. territory. Key Responsibilities Drive Revenue: Establish sales quotas and aggressively grow market share within the territory. Rep Management: Train and travel with independent sales representatives (expect >2 weeks of travel per month). Network Expansion: Call on key distributors, contractors, designers, and national accounts. Strategic Presence: Set up and attend major industry trade shows to showcase the product line. Reporting: Develop growth strategies and report activities directly to senior management. Candidate Requirements Industry Experience: At least 3 years of sales experience in the lighting or PV (solar) industry. Channel Expertise: Minimum 3 years of technical sales experience specifically through electrical distribution. Leadership: 3+ years of experience successfully managing sales reps. Communication: Exceptional writing and phone skills with the ability to work independently. Location: Must be based in the Western U.S. (SF Bay Area or Greater Los Angeles preferred). ESP PROSEARCH: We are Executive Recruiters with a proprietary search methodology dedicated to bringing people together in the Lighting, Controls, and related Cleantech Industries. We Recruit Proven Performers #WRPP within the Sales, Product Management, Business Development and Engineering disciplines with Industry Titans to Leading Edge Start Ups. Visit www.ESPprosearch.com for additional opportunities. Connect on LinkedIn and follow our Company Page to remain current on our latest opportunities. Contact: David Shiller Executive Recruiter ESP PROSEARCH, LLC M: (412) 897-6432 P: (786) 573-9273 E: david@espprosearch.com LI: www.linkedin.com/in/davidshiller W: www.espprosearch.com

Job DescriptionDescription: About GRID Alternatives GRID Alternatives is a national leader in making clean, affordable solar power and solar jobs accessible to low-income communities and communities of color. GRID is an entrepreneurial, high-growth non-profit organization that provides direct solar installation and project development; clean mobility options; workforce training and service-learning opportunities; and low-income solar policy advocacy. Our Vision: a rapid, equitable transition to a world powered by renewable energy that benefits everyone. Our Mission: to build community-powered solutions to advance economic and environmental justice through renewable energy. What it's like to work at GRID… At GRID, we care about each other and know that each employee has a whole self that includes life outside of work. Our culture supports learning, growth and well-being of all of our team members. Summary of the role: The Commercial Desing Engineer is an individual contributor role within GRID Alternatives’ commercial build team, collaborating with the Director of Commercial Build and Engineering. This position plays an important role in delivering high-quality, code-compliant designs for multifamily and light commercial projects, with most systems in the 50 kW–500 kW range. Rooftop solar is the core scope of this role, with additional opportunities to work on carport solar, battery-enabled micro-grids, and EVSE infrastructure as GRID continues to diversify and expand its commercial portfolio. In this role, you’ll collaborate closely with other designers, construction coordinators, field supervisors, and development teams to support build development and project execution. You’ll contribute technical expertise throughout the project lifecycle while also helping improve design standards, tools, and processes as the program grows. This role is ideal for an experienced commercial solar designer who enjoys solving complex technical problems, working collaboratively across teams, and contributing to a thoughtful, purposeful organization. What you will be doing (essential responsibilities): • Remote within the U.S, preferably west coast, • Produce complete design packages for utility and AHJ submittals for commercial solar and solar-plus-storage projects, generally ranging from 50 kW to 500 kW, • Develop CAD layouts, electrical diagrams, stringing plans, calculations, elevations, details, and bills of materials based on project requirements, • Serve as a technical resource within the commercial design team, assisting with design questions, code interpretation, and troubleshooting, • Perform quality assurance reviews of colleagues’ work to ensure accuracy, constructability, and code compliance, • Clearly communicate design intent, assumptions, and constraints to internal teams and external partners, including project managers, construction teams, utilities, and AHJs, • Provide technical guidance to junior designers through reviews, feedback, and informal training, • Contribute ideas and feedback on design standards, templates, tools, and workflows in partnership with the Commercial Director of Design and Engineering and peers, • Coordinate with external engineering vendors as needed to support project deliveryRequirements: Your areas of knowledge and expertise... • 3+ years of experience designing grid-tied commercial and/or multifamily solar projects, including solar-plus-storage, • Deep understanding of commercial PV system design, component selection, and production modeling, • Strong proficiency in AutoCAD and Excel, with experience using tools such as Helioscope, Aurora, PV Watts, NREL SAM, PVsyst, or similar, • Experience producing utility- and AHJ-ready plan sets, including calculations, details, and as-built documentation, • Ability to clearly explain technical concepts and design decisions to a range of audiences, • A collaborative working style that values shared problem-solving, consensus-building, and alignment across fields, • Strong attention to detail and a quality-focused mentality, • Ability to exercise sound technical judgment while working within established standards, processes, and decision frameworks, • Curiosity and interest in improving tools, templates, and workflows, • Openness to feedback from peers, construction teams, and managers, • Interest in supporting junior designers as part of a collaborative team Benefits and how we take care of you Compensation: The compensation range for this fulltime position is xxxxx. The base pay that will actually be offered will vary depending on job-related knowledge, skills, location, experience and take into account internal equity. Benefits: Medical, Dental, Vision/Eye Care insurance, 5 weeks paid time off (PTO),13 paid holidays, Commuter Checks, 403b Retirement Plan, Employee Assistance Program (EAP), Flexible Spending Account (FSA), Health Savings Account (HSA), STD, LTD, and AD&D insurance Where you will sit & the places you may go… The ideal candidate will sit in xxxxx. This position may require up to 25% out-of-town travel to regional offices and special projects such as org-wide celebrations, team building exercises, etc. Availability to work nights and weekends may very rarely be required. GRID Alternatives may provide vehicles for work travel and/or travel reimbursement for personal vehicle use. In this instance, applicants must hold a valid driver’s license and have a good driving record. Important to note for California applicants: **Hired CA candidates must be able to pass a screening for drugs that are illegal in the state of California, including: amphetamine, cocaine metabolite, opiates, and PCP. Reasonable Accommodation for Job Seekers with a Disability: If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to: RECRUITING@GRIDALTERNATIVES.ORG Ready to Apply? Submit a resume describing your interest. Due to the high volume of inquiries, mailed and emailed applications are not accepted. GRID Alternatives provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, national origin, age, disability or genetics. Because we value EID at GRID Alternatives, we encourage folks from all backgrounds to apply, even if you do not meet all of the preferred qualifications. Every member of GRID Alternatives must be dedicated to participating in the organization's equity, inclusion, and diversity (EID) work.

Job Description The Role We are looking for a Senior Project Engineer to provide comprehensive applications/project engineering support for our distributed energy and microgrid projects. Our projects typically include managing a variety of DER and microgrid assets such as solar, energy storage, controls, and reciprocating engines. You will report to our VP of Project Engineering and Preconstruction and will work a hybrid schedule out of one of our offices in Ridgewood, NJ, NYC, Oakland, CA, or Santa Monica, CA. Key responsibilities will include: • Utilize your strong technical and communication skills to interface with all aspects of the business and customers., • Work extensively with our execution (project management) team to deliver turn-key solutions for our customers within budget and per schedule., • Work with the business development, execution, and commercial teams on specific projects to ensure the integration of the microgrid is technically correct, practical, and cost-effective. This includes working with existing service entrance one-line drawings or creating new ones, to provide the best design interface for functionality and cost., • Investigate the interconnection, which includes modifications to existing design concepts that are applicable for each site., • Work with switchgear manufacturers and other equipment OEMs to develop innovative designs and costing that are scalable to many jobs and customer sites. This includes working at voltage levels of 23kV, 3.8kV, 4.16kV, 480V, and 208V, depending on site and system size., • Provide significant input to the solar, battery, and generator designs to optimize performance, reliability, and sustainability for each customer site., • Directly manage engineering consultants in the preparation of detailed engineering and construction drawings and specifications for 30%, 60%, 90% Issue for Permit, and 100% Issue for Construction drawing packages. The Ideal Candidate • 7+ years of experience in the design and construction of power/generation/renewable energy projects, • Thorough technical understanding of distributed energy technologies, including some combination of solar, battery, and reciprocating engines/turbines, • Understanding of rotating power with reciprocating engines in the 200 to 2000 kW size range per engine. This includes parallel operation with the utility as well as with other DERs, both in grid parallel and island mode operations., • Solid understanding of the utility side of the interconnection., • Knowledge of the various DER power sources within the Microgrid and how they best interface with the utility to provide the most efficient system., • Knowledge of emissions from the utility side, as well as each of the DERs., • Knowledge of systems controls for all the DERs and how they can be utilized to accomplish specific operating goals while part of the Microgrid. These goals provide economic return to the customer and us., • Experience in submitting interconnection applications, reviewing Utility studies, which may include Detailed Studies, Facility Studies, and System Impact Studies., • Excellent communication skills, including the ability to communicate with technical and non-technical people to make projects work., • AutoCAD experience (for creating conceptual one-line diagrams and site layouts), • BS in Electrical Engineering with a focus on the power side, • PE in power or progressing towards that license, • Advanced courses in power or a higher-level degree in the field are preferredDER work electrical background - mechanical is ok, as long as they've done electricaldeep into the engineering of the projects - managing EORs doing the engineering role - not just the analytics - made selections on gear and breaker sizes - they know how to build it. Solar if they've done the electrical side in depthBess and gens even betterAll the PE do the interconnection applications part flex on east or west, not remote; in office Interview: Ryan, Justin/Steve, Tina, case study/in person; deepa/Neil/Steph This is a great opportunity to have a long-term impact on a fast-paced, private equity-backed growth business. Some of the core virtues embraced by Scales’ employees include: · Do the Right Thing· Act Like an Owner· Hustle· Demand Results· Go Together· Evolve or Disappear We offer a competitive compensation package and a comprehensive benefits program including medical benefits, paid vacation and holidays, and 401K matching. About Scale Microgrids Scale is redefining resilience, with advanced microgrids that go beyond traditional backup power solutions to give businesses the power to adapt and thrive amid all of today’s growing energy challenges. As a vertically-integrated provider of turnkey advanced microgrid systems, Scale combines project design, engineering, and execution expertise with microgrid-as-a-service financing to offer our customers systems that are optimized to deliver maximum value from day one while ensuring ultra-reliable operations and fast time-to-power. Scale is backed by EQT, a firm with ~$250B in assets, bringing a depth of experience, resources, and capital that will enable Scale to continue pursuing our vision of powering the world with distributed energy. The investment enables Scale to own and operate billions of dollars in distributed generation assets. To learn more about Scale Microgrids, please visit https://www.scalemicrogrids.com. About EQTEQT is a leading purpose-driven global investment organization with EUR 246 billion in total assets under management, divided into two business segments: Private Capital and Real Assets. EQT owns portfolio companies and assets in Europe, Asia Pacific, and the Americas and supports them in achieving sustainable growth, operational excellence, and market leadership. To learn more about EQT, please visit https://eqtgroup.com. Scale strives to attract and retain a workforce that reflects the composition of our customer base and communities. We are committed to providing a work environment that provides everyone with equal access and opportunity to contribute and drive meaningful outcomes. We encourage applicants from all backgrounds to apply and will consider qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, or national origin. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description We have been in business since 2006 and are a rapidly growing team with plenty of opportunities for the right people in the right seats to join our team. We operate on core values, we hire and terminate based on these core values. RRE, Inc. is in the process of building a great culture. What is it for you: • Great winning Team culture, • Great standards that are always evolving with our Team, • Permanent full-time position with our Team, • There are endless opportunities as we begin expanding geographically and with trade skills, • Access to the company's health plan, Kaiser Permanente, • Access to dental and vision care, • Retirement plan beginning in 2025, • Six paid holidays per year Team RRE Core Values: • We are Team Players, • We Prioritize open Communication, • We Exercise Emotional Control, • We do the Right Thing, • We are Dedicated to Winning These core values dictate our daily lives. Most terminated team members failed to uphold these values in their approach to conducting themselves on our project sites and interactions with others. You need to ask yourself 'Can I live up to these Core Values?' If there is any hesitation now, it will not take long for our team to see that you can't adhere to them and you will be dismissed. Who is Team RRE: • "We are team players that prioritize open communication while exercising emotional control that do the right thing while being dedicated to winning, we are not perfect; we learn from our mistakes in the process of being great" Team RRE Purpose: • To provide our clients with maximum value and the greatest communication possible as team players, that do the right thing and are dedicated to winning. Some of Team RRE standards: • We have Clients, not customers, • We are Team members, not employees, • We are Positive, not negative., • We Respect others, • We say 'Please', • We say 'Thank You' We are looking to grow our team with highly motivated, self-driven individuals! Must have a positive winning mindset! We are a relationship-based contractor. We care about you getting home safely to your loved ones. We have and will maintain a POSITIVE team environment. We are an electrical contractor performing work on commercial, and residential (multi-family) job sites currently in northern California. We are looking for electrical trainees/apprentices/journeymen and foremen who would like to join our rapidly growing team. New team members will need to have the following but not limited too: • A positive Attitude and Team player is the only way we work!!, • Knowledge of the National Electric Code, • Manage time, materials, work orders, daily time sheets, and reports for project documentation., • Practice safety first, good communication skills, client-friendly, and excellent work ethics., • Must be able to work independently, and maintain accountability of property, including tools, equipment, vehicles, and materials., • Available for occasional weekend or holiday work, should the situation arise., • Electrical Trainee or Journeyman card Applicants must be able to meet the following qualifications: First Year Apprentice - We are not accepting applications for first year apprentices. Second Year Apprentice - 2nd Yr apprentices typically can perform the following tasks: • Ability to read the basic information presented with a plan set, specifically the lighting floor plan, power floor plan and rooftop power plan;, • Layout and installation of branch circuits;, • Able to coordinate proper wire and conduit sizes;, • Able to bend conduit into multiple layout configurations;, • Have knowledge of the various types of lights and specialty lights;, • Has knowledge of how to operate common power tools including saws, threaders, hydraulic benders, and knockout punches., • Understands and demonstrates the ability to properly label circuits, wires, breakers, and cover plates. Third Year Apprentice - 3rd Year apprentices can perform all the above and in addition the following tasks: • Read the plan set in its entirety;, • Able to layout and install conduit for all underslab power;, • Capable of installing panels and the MDP/MSB along with installing the feeders (conduit and wire);, • Knows how to wire a panel in accordance with the plan set and connect the proper circuits to the respective breakers;, • Understands and able to install a full grounding/bonding system throughout the entire electrical system, must be able to demonstrate how to install an Ufer ground;, • Can program lighting controllers including the time clock;, • Can layout all underground work including primary/secondary feeders;, • Knows and understands the 'Green Book' and the corresponding process of working with the Utility provider;, • Can set light pole foundations (at least two different configurations) and knows how to build the respective jigs for proper vertical alignment of light poles;, • Can operate excavators, power trenchers, vibrating plates and has the corresponding certificates including the forklift and telehandler certificates; Journeyman • Able to do all the above plus:, • Understands how Commercial Level Solar Systems Operate;, • Wire Motors, • Understands Medium Voltage Systems, • Can configure and install Fire Alarm systems, Standard Communication Systems, Data Systems and Other Alarm Systems;, • Able to fully hook up generators and the corresponding alarm configurations including elevators, emergency lighting and bypasses Working Conditions - the following are typical requirements for all field team members: • Work in all weather elements including extreme heat/cold and understands the importance of hydration;, • Work on all types of ladders up to 14 foot 'A' frame ladders, 32 foot extension ladders and able to carry the ladders and properly set them;, • Work on ladders for extended periods of time (six hours a day at times);, • At times, the field team will have to work at extended heights of up to 125 feet, must be comfortable utilizing an articulating boom or a scissor lift;, • At times will work in very restricted spaces such as closets, crawl spaces, Attics, manholes and switchgear rooms;, • Lift weight in excess of 50 pounds without assistance;, • Work must be done while wearing standard Personal Protective Equipment such as eye protection, safety helmet, long sleeve shirts and at times a respirator;, • Work up to 10 hours a day. *Apprentices/Journeymen are not allowed to work on energized circuits. RRE, Inc. follows a very rigid policy and Standard Operating Procedure to measure voltage or access an energized circuit. All Candidates Must Have the Following Safety Certificates: You are granted a 90 day probationary period to complete the coursework in lieu of having the certificates at time of starting with RRE, Inc.; but the certificates are a prerequisite for continued employment with RRE. • OSHA 30;, • One Hour Ladder Safety Course;, • Two Hour Fall Protection Course;, • One Hour CPR Course GENERAL INFORMATION • We are an equal opportunity employer., • Opportunities for career growth and development., • We offer competitive wages., • Pay is based on experience and the value you bring to our team, • Please provide a full resume and the State in which active Licenses are held., • Travel required on occasion We offer benefits and endless room to move up with our team. Get in now and grow with us. Company DescriptionWe are in the process of building the greatest Team in the industry, with a great culture that provides maximum value to our clients and team members. It is important that our team members are taken care of. We hold our team to a different standard, which sets us apart from others. We are a fast-growing company. We are building a team in the United States and internationally with a real culture and will have it no other way as it takes everyone on the team to be great. We have a positive team culture and will keep it that way! Team RRE Core Values: We are team players We prioritize open Communication We exercise Emotional control We do the right thing We are dedicated to winning In business since 2006 and in the process of growing our team!We are in the process of building the greatest Team in the industry, with a great culture that provides maximum value to our clients and team members. It is important that our team members are taken care of. We hold our team to a different standard, which sets us apart from others. We are a fast-growing company. We are building a team in the United States and internationally with a real culture and will have it no other way as it takes everyone on the team to be great. \r\n\r\nWe have a positive team culture and will keep it that way!\r\n\r\nTeam RRE Core Values:\r\nWe are team players\r\nWe prioritize open Communication\r\nWe exercise Emotional control\r\nWe do the right thing\r\nWe are dedicated to winning\r\n\r\nIn business since 2006 and in the process of growing our team!

Requisition ID # 172626 Job Category: Engineering / Science Job Level: Individual Contributor Business Unit: Strategy & Growth Work Type: Hybrid Job Location: Oakland Job Title: Senior Grid Innovation Engineer Job Code: 51986179 Team Summary The Grid Innovation Delivery (GID) team is making the grid of the future a reality. The team scales new technologies and pilots into sustainable, mature programs that PG&E utilizes to deliver for our hometowns and serve our planet. The team bridges early R&D innovation efforts and PG&E’s established lines of business. The Remote Grid (RG) Program is the GID team’s primary product today. Remote Grids cost-effectively address wildfire risk by serving customers with fully islanded (24/7/365) microgrids of solar, batteries, and fuel-powered generation and permanently removing high-risk overhead power lines. The GID team has deployed and supports the operation of 18 RGs with plans to grow the fleet to two dozen in the next two years. See the RG Program page here, as well as media coverage from the PG&E newsroom here. Position Summary This Senior-level Grid Innovation Delivery Engineer is an electrical engineering thought leader, who builds the knowledge base and collaboratively develops innovative solutions to increase safety, reliability, decarbonization, and affordability. They develop new standards and process documentation to mature the program. Grid Innovation Delivery Engineers also take full ownership of each project’s technical execution throughout its lifecycle: The project engineer iterates on the project design with Engineering Procurement, and Construction (EPC) vendors with attention to safety, customer need, environmental impacts, constructability, and maintenance. They analyze microgrid energy modeling and product sizing to ensure right-fit solutions and compliance with technical and construction specifications, including approval of testing and Go-Live operations. Once a project is live, they continue to support Operations and Maintenance (O&M) through performance analytics, identification of operational improvements, and root cause investigations. A strong applicant will be an organized and diligent collaborator, proactively driving a broad range of technical and cross-functional tasks. They will collaborate closely with other Grid Innovation Engineers, PG&E groups (e.g. project management, environmental, asset management), and external partners. This is a well-rounded engineering role with flexibility to leverage the applicant’s unique skillset to own specific responsibilities and to pursue development opportunities. Experience with electrical engineering design or civil engineering design is a plus. This position is Hybrid, primarily working from your remote office within PG&E’s service territory. In-person activities at PG&E’s new Oakland General Office are based on business needs, focusing on synchronous collaboration, affinity building, ideation, or planning activities (1-2 times per week). The role will also require travel to sites throughout the PG&E service territory (need varies, 6 times a year on average). After the first year, this role is eligible to apply for an alternative 9/80 schedule (eight nine-hour days and one eight-hour day over a two-week period). Project engineers rotate “on call” duties for operational projects to support engineering troubleshooting during rare system outages. PG&E is providing the salary range that the company in good faith believes it might pay for this position at the time of the job posting. This compensation range is specific to the locality of the job. The actual salary paid to an individual will be based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, and internal equity. We would not anticipate that the individual hired into this role would land at or near the top half of the range described below, but the decision will be dependent on the facts and circumstances of each case. A reasonable salary range is: Bay Area Minimum: $122,0000 Bay Area Mid-point: $158,000 Bay Area Maximum: $194,000 This job is also eligible to participate in PG&E’s discretionary incentive compensation programs. Core Responsibilities: • Assist customers and PG&E stakeholders in assessing the viability and requirements to develop distributed energy technology projects, • Collaborate with external vendors, other utilities, manufacturers, and internal teams (e.g. engineering, IT, and standards departments) on advancing new distributed energy resources applications, • Understand the various data streams that are needed to model microgrid behavior, • Meet with stakeholders to better understand their issues and inform them of the potential impacts, • Explore, innovate, and demonstrate technologies that deliver safe, reliable, and affordable energy solutions, • Identify conditions when distributed energy resources may provide more benefits to the customers and the grid, • Assist in assessments of potential distributed energy resources risks, • Assist in material prep and/or presenting for technical experts in regulatory proceedings and industry working groups Minimum Qualifications: • Bachelor’s Degree in Engineering or equivalent experience, • Experience with grid modeling software (e.g. CYMDIST, PSLF, Aspen, etc.), • 5 years of electric utility related experience Desired Qualifications: • Experience working at or with developers of distributed energy resources, • Understanding of construction, electrical, and power system protection design, • Experience driving technology R&D through pilots and scale-up in the face of ambiguity, • Knowledge of applicable laws, codes, and standards for microgrids or distribution service, • Experience with the following design tools: HOMER, PVSyst, AutoCAD, Bluebeam, and Google Earth. Proficient in Microsoft Office Suite and Microsoft 365., • Experience analyzing energy data (Excel and SQL at a minimum; Pandas, NumPy, or R desired), • Effectively communicate highly complex ideas with credibility, confidence, and clarity to diverse audiences using verbal, written, and visual means, • Bias toward action with a strong sense of ownership and empathy, • Masters of Science in Engineering (Electrical preferred), • Licensed Engineer-in-Training or Professional Engineer (P.E. Electrical preferred) in the State of California, • Bachelor’s in Engineering (Electrical preferred), • 5 years of job-related experience

Job DescriptionSalary: $40-$45/hour, DOE Do you want to become an employee-owner for a mission-driven, growth focused company? Do you approach your work with passion and dedication? About the Company Sun Light & Power drives the total adoption of clean energy by designing, building, maintaining, and advocating for clean energy solutions so future generations inherit a healthy planet. We are committed to delivering an exceptional customer experience by always innovating and acting with dedication and passion. We are proud to be certified B-Corporation and this influences our way of working. We make intentional decisions considering sustainability, positive impact on our community and growing profit for the prosperity of our employee-owners. We are a company that strives for a healthy life-work balance and a dog friendly environment. Position Description: The Photovoltaic Service Technician utilizes their thorough understanding of electricity and photovoltaic systems to troubleshoot, diagnose and repair systems in a proficient and timely manner. They work with minimal support from our administrative staff, who typically make first contact with prospective or return customers and then bill them once work is complete. The perfect person for this position is someone who has an in-depth understanding of photovoltaic systems and who enjoys customer service work. Ideally, you will have received the NABCEP (North American Board of Certified Energy Practitioners) Photovoltaic Installer Certification, live in the East Bay, understand the value of working for a green company, and embrace new technology and products. Responsibilities: • Respond to service calls for residential, commercial and government customers, • Track customer interactions and job progress in Salesforce.com, • Troubleshoot and diagnose system issues, any property damage and safety risks, • Coordinate with admin staff to design and estimate repairs for PV systems, • Interact with customers in a professional manner, • Accurately track billable hours, • Contribute to production quality control and cost-reduction efforts, • Install mounting system for solar modules including roof attachments, weatherproof penetrations, rack components, structural members, manage rooftop wires, etc., • Install conduit, pull & terminate wire, etc., • Install and/or disconnect, inverters, small and large, • Operate general carpentry and hand-tools, • Set up, upgrade and troubleshoot monitoring systems, • Complete work in a timely and accurate manner, • Participate in safety meeting and other meetings, • Implement a Site Specific Safety Plan including; perform job site hazard analysis, implement vehicle safety, install site safety barriers, etc., • Ensure the work site is clean and clear site of clutter and other hazards, • Occasionally travel overnight to out-of-town installations <1%, • Troubleshoot battery based systems (both grid tied battery backup and grid-independent), • Perform engineering relating to specification of replacement equipment including (but not limited to): grid tied inverters, battery based inverters, combiner boxes, disconnect switches, batteries, charge controllers., • Propose and lead structural redesigns for module and BOS equipment racking and support., • Lead crew and manage timeline in complicated projects included removal and replacement of equipment to accommodate customer initiated re-roof or building modifications. Qualifications: • Must have at least 8 years of experience building Photovoltaic systems, • Must have at least 5 years of leading electrical portion of PV installation and/or repair work including:, • Installing electrical equipment (inverter, disconnects), • Sizing, specifying, ordering proper conduit and wire sizes (per NEC code), • Safe circuit disconnection prior to servicing electrical equipment, • Safe use of a meter to measure AC and DC voltage and current, • Ability to interpret meter readings to determine system health, • Must have at least 1 year of leading battery based installation and/or repair work., • Ability to read a schematic drawing, • Ability to identify sources of potential faults and troubleshoot system problems on DC and AC sides., • Ability to assess job: recognize potential problems, bottle-neck tasks, (length of) task times, materials and tools needed, engineering (both future and pre-existing problems i.e. space constraints, PRV runs, potential code violations etc.), • Have a professional demeanor on the job at all time and have the ability to effectively communicate with customers, • Ability to interface with all departments in order to prepare and build a job. Have the necessary skills to solve and report any problems concerning the job (with an eye towards preventing the repeat of problem in the future), • Possess basic carpentry and electrical tools, • Basic knowledge of construction safety standards, • Knowledge of basic arithmetic, fractions, algebra, and basic high school geometry, • Required to have a current CA driver license with an acceptable driving record, • Familiar with the warehouse environment and truck inventory practices, • Have the ability to follow instructions and asks questions when not clear on what is expected, • Strong work ethic, attentive, and ready to learn, • Adaptability and versatility. These two qualities should apply to any taskwhether dealing with people or pipe racks, • Commitment to excellence and an eye for detail, • Must be able to climb ladders and be comfortable working at various heights; work in extreme environments (in the rain, hot sun, crawl spaces and attics), • Able to lift at least 75 pounds Compensation: $40-$45/hour, DOE Benefits: Sun Light & Power offers a comprehensive benefits package that includes, but is not limited to: • Health-Sun Light & Power offers 8 different medical plans through Health Net and Kaiser. We also offer coverage for dependent benefit costs per company policy., • Dental- Sun Light & Power covers 100% through Beam, • Vision- Sun Light & Power covers 100%through Beam, • Long-term disability insurance:Sun Light & Power covers 100%, • FSA, HSA and Commuter program, • 13 PTO days, 9 paid holidays, • 2 paid days for volunteering, • 401(k) retirement plan-Sun Light & Power will match 50% of 401(k) deferments, up to $1,000, • $500 annual stipend for tuition, • Company Stock- Sun Light & Power annually allocates 8% of our 1,000,000 issued shares of the company to ESOP Participants based on a formula considering the number of employees, employees years of service and employees total compensation. Shares are vested over a 6-year period. Work Environment & Physical Requirements: While performing the duties of this job, the employee is occasionally expose to moving mechanical parts and vehicles. The noise level in the work environment is usually quiet to moderate. Reasonable accommodations may be made to enable people with disabilities to perform the essential functions of the job. Equal Employment Opportunity Statement: It is the policy of Sun Light & Power to provide equal employment opportunity to all persons without regard to sex, race, color, national origin, ancestry, citizenship, religion, age, physical or mental disability, medical condition, sexual orientation, gender identity or gender expression, military or veteran status, marital status, registered domestic partner status, genetic information, or any other basis protected by applicable federal or state law. This policy applies to all aspects of employment, including but not limited to: recruitment, selection, training, promotion, transfer, compensation, demotion, termination, etc.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact We are searching for a skilled and motivated EV Charging Field Service Technician. This key role is responsible for the onsite repair and maintenance of EV charging stations in a specific geographic region, including but not limited to site safety, electrical system maintenance/repair, site field reports, and other duties as required to properly maintain and operate the site within the contractual requirements. This role must be able to work independently with little to no supervision and will be required to work in the field under various conditions. This position offers an hourly pay range of $25.00 to $32.00, with final compensation determined based on experience and qualifications. Core Responsibilities • Perform OEM testing, troubleshooting, repairs, and upgrades/ revisions to a broad range of equipment, ranging from Level 2 Electric Vehicle (EV) chargers to DC Fast Chargers., • Perform testing on equipment, including but not limited to; insulation testing (megger testing), thermal imagery, torque tests, and performance evaluations., • Troubleshoot system performance issues and locate/isolate ground faults., • Work closely with the Planning and Scheduling team to ensure maintenance schedules are adhered to and work orders are completed accurately and on time., • Review site manuals and drawings to ensure proper service and maintenance of equipment., • In fieldwork including electrical and mechanical preventative and corrective maintenance of site equipment, site field reporting, work order completion, and other work as needed., • Ensure that all issues at the site are documented in the work order system and are addressed in a timely manner. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Specific duties may vary or evolve over time based on business and client needs. Core Experience • 2+ years' equivalent experience in servicing electrical power equipment in the commercial or utility energy field and/or formal electrical training., • Strong electrical, electronic, and mechanical troubleshooting skills. Technical knowledge of Electric Vehicle (EV) chargers, solar power installations, or other applicable power electronics is preferred, but not required., • Experience using a Computerized Maintenance Management System (CMMS) to generate, track, and complete site work requirements., • Strong Microsoft Office skills., • Ability to analyze and resolve problems independently with a high level of results orientation., • Must be proficient in reading, writing, speaking, and understanding English to safely perform job duties, interpret technical instructions, and communicate effectively with team members and customers. Interpreter services are not available for this position. Physical/Work Environment • This role requires working in all elements, depending on job location, time of year, heat, cold, rain & snow (depending on geographic region for the role)., • Working around high voltages and currents., • Wear personal protective equipment (PPE), always including a hard hat and safety glasses., • Repetitive use of legs, arms, hands, and fingers., • Conduct site safety assessments and identify all safety hazards on the job site, properly generate and complete JHA, Lock Out Tag Out (LOTO), and other safety-related documentation as per OSHA and site-specific requirements. Compensation: Pay Range - $25.00-$32.00 hourly/DOE At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$25—$32 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

A leading EPC organization in renewable energy seeks a Senior Solar Commissioning Superintendent to join their Solar Operations team. This role involves overseeing electrical commissioning activities for utility-scale solar projects while ensuring safety and performance standards. The ideal candidat

Essential Responsibilities Performs assessments of electrical systems and prepare written reports documenting the capacity and limitations of the systems Performs detailed engineering calculations and analysis in connection with electrical design of utility systems for transportation facilities Prep

Minimum 8 years experience in electrical design engineering or related fields with a bachelors degree in electrical engineering or related field or equivalent combination of education and experience. The Vision Systems Electrical Engineer will provide engineering design test and troubleshooting skil

This role is handson and operationsfocused supporting all arriving and departing aircraft with professionalism urgency and a positive attitude.Aircraft Ground Handling & Ramp Operations.Perform aircraft fueling towing parking deicing placement and basic cleaning.Operate a wide range of aircraft

Lead New Product Introduction (NPI) activities for electrical systems in medical devices.

This role is handson and operationsfocused supporting all arriving and departing aircraft with professionalism urgency and a positive attitude.Aircraft Ground Handling & Ramp Operations.Perform aircraft fueling towing parking deicing placement and basic cleaning.Operate a wide range of aircraft

Perform hands-on installation service and diagnostics on 12V48V DC electrical systems. Formal technical training or certification in automotive electrical or electronics repair.

Repair engines transmissions braking systems suspension HVAC and electrical systems.

The Field Service Technician is responsible for inspection troubleshooting scheduling and execution of repairs and preventative maintenance on INFICON Leak Detectors at customer sites.Work will also include In-House repairs at our service center in Santa Clara CA.Must be self-motivated to work unsup

B level qualifications including Diagnostic Electrical and Engine Repair. Diagnose maintain and repair vehicle automotive systems including engine transmission electrical steering suspension brakes air conditioning etc.

Role: NPI Test Engineer (only EE / Electrical Engineering profiles).

Looking for a part-time role that keeps you active works around your schedule and lets you see the results of your work every day Were hiring.This role is ideal for someone who enjoys working independently staying physically active and taking pride in keeping things running the right way.Keep apartm

Familiarity with applicable electrical code requirements electrical safe work practices lockout/tagout energized-work controls and site safety procedures. Working knowledge of power distribution electrical controls/interfaces instrumentation grounding electrical drawings single-line diagrams schemat

Education: Bachelors degree in Electrical Engineering Manufacturing Engineering or a related technical discipline. We are seeking a highly experienced and strategic Senior Electrical Manufacturing New Product Introduction (NPI) Engineer to lead the manufacturing readiness and transfer for our most c

Lubricate machinery change parts or perform other routine machinery maintenance.Assist with the companies Hazardous Materials and Hazardous Waste programs in compliance with Federal State and Local regulations.Perform preventive and corrective maintenance tasks inspections calibrations and activitie

Under general supervision follows oral and/or written instructions in performance of a wide variety of skilled technical maintenance repair and testing on complex digital and analog electronic components electrical and electro-mechanical components cable assemblies sub-assemblies assemblies field re

Federal Applicant Rights - English.Federal Applicant Rights - Spanish.Identifies analyzes and executes required service orders including repairs planned maintenance and installations in assigned service territory.Understands company service contracts and ensures maintenance and services are performe

If youre looking to upgrade your career you should talk with us.Big O Tires you will perform service and installation activities associated with store products and services in an accurate and timely manner.Potential to be promoted to Shop Foreman or General Manager in 1-2 years up to 100k.Health ins

Project Manager Traffic Engineering.Design Studio in conducting traffic analysis and planning for the development and design of new EV charging facilities.This role will partner closely with the clients Operational Excellence Manager to deliver efficient data-driven design recommendations that enha

Youre excited about this opportunity because you will Assemble mechanical electrical and electromechanical production units and subassemblies according to released drawings work instructions and build documentation Perform repeatable production builds of wiring harnesses cable assemblies and elec

We are seeking a detail-oriented and efficient Mechanical Assembler to join our team in City of Industry United this role you will be responsible for assembling mechanical components with precision and care ensuring that every product meets our high-quality standards.Youll work in a collaborative f

Founded in 1987 Gafcon is a family-founded firm delivering complex projects that strengthen and empower communities.We are a project and construction management consulting firm acting as Owners Representatives to guide and advocate for our clients throughout every phase of their projects.We speciali

Lead electrical design for PCBAs across the robotic platform - including schematic capture component selection architecture and design considerations for signal integrity manufacturability testability and cost. Develop execute and automate electrical test plans - including board bring-up functional

Founded in 1987 Gafcon is a family-founded firm delivering complex projects that strengthen and empower communities.We are a project and construction management consulting firm acting as Owners Representatives to guide and advocate for our clients throughout every phase of their projects.We speciali

Bachelors Degree in Electrical / Electronic Engineering with 10 years of design and development experience or a Masters Degree in Electrical / Electronic Engineering with 8 years of design and development experience. Principal R&D Electrical Engineer Shockwave Medica. The Principal R&D Elec