Trabajos Construction & Trades en La Puente, California - Page 3Crear alertas

Job Description Embark on a transformative career with Safran Passenger Innovations, where we are forging an unparalleled in-flight entertainment ecosystem. As an innovative company we design and engineer world-class In-Flight Entertainment and Connectivity (IFEC) solutions. Our products are constantly evolving, solving complex media distribution, playback, and networking problems in a secure, demanding on-wing environment. Safran IFEC products are utilized by many of the world’s premier air carriers. Step aboard and help us by creating the best in-flight experiences for today and beyond! Job Summary: The Senior Test Lab Technician, under little to no supervision, performs a variety of tasks in the System Test Lab (Rack Room). The individual shall be responsible for providing troubleshooting and repair support in the test lab and leading technicians in the same. The Senior Test Lab Technician will also be responsible for the creation and update of engineering drawings, assembling of test fixtures and other lab equipment, understanding rack network setups and be able to troubleshoot and modify them, and assisting in the day to day support operations of the Rack Room. Duties and Responsibilities: • Assist with and perform troubleshooting on electrical and Ethernet cabling using common tools, • Create wiring harnesses/assemblies from engineering drawings, • Assemble and maintain new test racks and mini racks, • Load software and configuration onto test racks and mini racks, • Troubleshoot test rack and mini rack issues including physical connections, miswiring, software load issues and software configuration issues, • Assist in maintaining an accurate inventory of lab hardware and assets, • High school diploma or equivalent required, • 6+ years of experience as an engineering lab technician, assemble/repair line tech or related professional experience, • 2+ years of experience building cables and/or other electromechanical assemblies, • Working knowledge of electronic and electromechanical components, • Skilled in use of lab instruments (multimeter, etc.) The starting pay range for this position is $28.00/hr to $33.00/hr, however, base pay offered may vary depending on skills, experience, job-related knowledge, and location. In addition to a comprehensive package of health benefits that include company contributions, Safran Passenger Innovations offers a variety of additional benefits and perks to enhance your work-life balance experience including but not limited to: • A home allowance to elevate your home workspace, • Discretionary bonus program, • Future financial security with a 401(k) program with company match, • Paid time off covering vacations, personal time off and sick days, capped off by an exciting year-end holiday shutdown

Job Description A Plus Mobile Maintenance, a family owned and operated establishment, is searching for a heavy and medium-duty diesel mechanic to be a part of our advanced mobile fleet technicians. The ideal candidate will be provided a company vehicle equipped with a workbox, ARC welder, gas-powered air compressor, and computer with diagnosing software. This service truck will be assigned only to you and will be brought home with you at the end of your shift. This means no commute to work - you don't have to spend your time or gas driving to/from your job. Your time starts when you roll out. What do we specialize in? * We are strictly mobile * Preventive Maintenance * DOT inspections * Yard Work * Emergency roadside repairs Where do we operate? * Orange * Riverside * Los Angeles * San Bernardino * Ventura counties The ideal candidate will have: * 3+ years experience as a heavy duty mechanic / technician * Independent work ethic with the ability to be flexible to the needs of the business * Computer diesel diagnosis software experience or basic computer operating skills * Clean driving record The tech should also be able to diagnosis and repair: * PM service * BIT/DOT inspections * Check engine light * ABS lights * DEF systems * Suspension repairs * Electronic repairs * Air conditioning * Brake repairs (drums, pads, and shoes) * Axle gaskets * Wheel seals * Vehicle no starts * Battery Issues * Engine Overheating * Faulty Sensors * Transmission Light

Job Description Job Title: Quality Assurance & Compliance Technician Department: Quality Assurance Reports To: Quality Assurance Manager About the Role We are seeking a highly skilled Quality Assurance Compliance Technician to join our team in the Precision Investment Casting industry. This role supports the development, implementation, evaluation, and monitoring of methods, procedures, and programs to ensure product quality. The technician will also help maintain certifications for REMET Corporation’s Food Safety Program and Quality Management System, while ensuring compliance with all safety, health, and environmental standards across REMET’s U.S. locations and subsidiaries. Key Responsibilities Quality Management System (QMS) * Support the development, implementation, and maintenance of the QMS to ensure ISO 9001 compliance. * Coordinate with departments to develop, update, and maintain documented procedures and work instructions. * Participate in annual ISO site assessments. Audits & Corrective Actions * Assist in managing the internal audit program: schedule, prepare templates, perform audits, and provide reports. * Conduct on-site audits and issue corrective/preventive action requests. * Track and follow up on corrective actions from internal, customer, or third-party audits. Training & Documentation * Support the development and delivery of training programs on QMS, Environmental, Health & Safety (EHS), documentation changes, and audit findings. * Maintain training records, track compliance against position requirements, and assist in updating position guides. Supplier & Customer Compliance * Complete customer-issued supplier surveys and certifications. * Manage REMET’s Approved Supplier Program and related documentation. * Monitor calibration schedules and maintain Calibration Reports across U.S. locations. Environmental, Health & Safety (EHS) * Support EHS program development, including manuals and Injury & Illness Prevention Programs. * Ensure compliance with federal, state, and local regulations; assist with permits, licenses, and reporting. * Conduct and monitor facility safety inspections per OSHA standards (e.g., HVAC, fire/security, emergency systems). * Keep management informed on regulatory updates and recommend solutions. General * Follow all ISO 9001 procedures and REMET Quality Policy. * Maintain certifications and training required for the role. * Perform additional duties as assigned. Working Relationships Internal * Collaborate with senior management on ISO 9001 compliance, quality initiatives, and EHS issues. * Work with managers, supervisors, and employees across all REMET sites on documentation, audits, and corrective/preventive actions. External * Represent REMET in EHS matters at trade associations. * Coordinate with ISO 9001 registrars, consultants, contractors, and third-party service providers. Essential Job Functions Physical Requirements * Ability to sit, stand, walk, bend, reach, and stretch for extended periods. * Lift up to 40 pounds occasionally. * Operate a motor vehicle and travel by air, car, or train as needed. * Work in environments with varying temperatures. Mental Requirements * Basic understanding of REMET products and applications. * Ability to communicate effectively with internal teams, customers, suppliers, and contractors. * Strong decision-making skills within company policy guidelines. * Ability to read and write in English; bilingual (English/Spanish) preferred. Knowledge, Skills & Experience * Preventive Controls Qualified Individual (PCQI) certification required, with strong knowledge of Food Safety Programs. * ISO 9001 knowledge through Lead Auditor Training, Internal Auditor Training, or equivalent experience. * 3–5 years’ experience in quality assurance and system auditing, preferably in the precision investment casting industry. * Familiarity with federal, state, and local EHS regulations. * Strong planning, organizational, communication, and interpersonal skills. * Detail-oriented, highly organized, with proficiency in Microsoft Office. * Ability to multitask and manage competing priorities effectively. * Bilingual (English/Spanish) is a plus. This position offers the opportunity to support REMET’s commitment to quality, safety, and compliance while contributing to our reputation as a trusted leader in the precision investment casting industry.

Job Description At Griffith Company, we recognize that people are our most valuable resource. We nurture that resource by fostering a work environment that encourages communication, respect and recognition. In this environment, Griffith Company employees flourish, taking their careers to new levels. In addition to offering a 120+ year history of quality, safety and excellence, Griffith Company has a dynamic, exciting and supportive culture where opportunity for growth abounds. We are looking for a Senior Estimator to join our Southern Region Team. This position is responsible for overseeing the development of accurate and timely estimates for both private and public works projects and bidding large scale and design-build/alternative procurement projects. Essential Functions • Review proposal specifications, drawings, soils reports and existing site conditions to determine scope of work., • Attend pre-bid meetings., • Oversee the good faith effort process and communicate the DBE requirements to the estimating team., • Coordinate bid preparation requirements with Contract Administrator., • Take ownership of bid document package and review prior to submission for completeness and accuracy., • Track work history and review schedules of projects being estimated., • Organize estimating team to prepare bids, select vendors and/or subcontractors and determine cost effectiveness of projects to bid., • Assess labor force necessary for projects bidding to determine whether Griffith Company has the capability to staff accordingly, if awarded the job., • Review project risk matrix on projects being bid by the team to assess risks and opportunities., • Perform risk and contract management responsibilities as required, and report findings to Chief Estimator and Division Manager., • Monitor owner changes and advise the estimating team of all changes in scope during the estimate period., • Coordinate total estimating effort relevant to particular bid/project as assigned., • Carefully review subcontractor quotes on bid day to determine scope gaps and redundancies., • Review final estimate and apply strategic cost factors, if necessary., • Oversee coordination pre-bid RFI’s prior to specification cutoff date., • Monitor post bid submission dates towards contract procurement, • Ensure proper project handoff if project is taken over by another PM/Team., • Monitor actual cost to estimated cost., • Coordinate scope of work with other Griffith Division and subcontractors., • Maintain files of working documents as backup for estimating figures., • Interface with Owner and other contractors to provide engineering and cost data regarding project feasibility., • Follow awarded contracts as assigned. May include estimating extra work items, change orders, credits, procuring material, monitoring progress, cost/budget, revenue, etc., • Lead training efforts for the Estimating Department., • Assist Chief Estimator with B2W maintenance and updates, • Champion continuous improvement initiatives., • Lead bid closings and provide guidance on final bid strategy to estimating team. Ensure bid items have been balanced., • Lead alternative delivery pursuits., • Take an active role in managing owner relationships and business development., • Ability to consistently lead estimates for bids up to $300,000,000. Must have a track record of consistently putting estimates together that give the field the opportunity to beat budget., • Proficient in understanding staging/phasing and project scope., • Must have a strong work ethic and excellent time management skills., • Must have the ability to work in a fast-paced environment with tight deadlines. Must be able to endure time pressures leading up to bid submission and on bid days., • Must have high attention to detail., • Must have the ability to multi-task and manage a team., • Excellent writing, presentation, and computer skills, • Develop a thorough knowledge of company procedures, estimating techniques, all engineering disciplines, cost control systems and accounts required., • Must master Bid2Win Estimating software., • Must master Blue Beam, Agtek and Sketch up., • Must master reading plans and specifications, • Must have a thorough understanding of special insurance requirements, such as builder’s risk, hazardous, railroad, etc., • Must have an understanding of different materials required for construction, by project type., • Must have an understanding of hold harmless and indemnity clauses in specifications., • Must have an understanding of liquidated damages., • Must have a thorough understanding of project labor agreements and labor requirements., • Must master the process of doing take-offs by phase, stage, area, etc., • Must have a thorough understanding of time impact analysis and time related overhead, • Must be familiar with Contract Accounting, • Must have an understanding of critical path and track delays., • Must master P6, SureTrak and MS Project., • Must have a valid driver’s license, • Collaboration Skills, • Leadership, • Detail Oriented, • Results Driven, • Process Oriented, • Analysis/Solution Driven, • Communication Proficiency, • Ethical Conduct, • Time Management, • Negotiation, • Organization Skills, • Applied Mathematical Skills The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. • Regularly required to sit., • Frequently required to stand and walk at jobsites. In addition to offering a comprehensive benefits package for all employees — including a superior health benefits package — Griffith Company also offers generous performance-based compensation. As part of an Employee Stock Ownership Plan (ESOP) Corporation, Griffith Company employees have the opportunity to directly and financially benefit from the Company's success. Other benefits include vacation time, sick days, paid holidays, and a 401K program. (Benefits are subject to eligibility requirements) Annual Salary Range: $140,000 - $170,000. Relocation assistance will be provided to candidates outside of the local area on a case-by-case basis. Visit us at: Griffith Company is an equal opportunity employer and an employee-owned company. Important Notice to Staffing Agencies/Recruiting Firms (please read completely) Griffith Company will not accept unsolicited resumes from any sources other than directly from a candidate, Griffith Company employee or any of our industry and academic partners. Any unsolicited resumes sent to any of the following will be considered Griffith Company property: Griffith Company mailing address, fax machine or email address; Griffith Company employees; or to Griffith Company's applicant/candidate database. Griffith Company will NOT pay a recruiting/placement fee for any candidate hire resulting from the receipt of an unsolicited resume. We will only accept resumes from staffing agencies/recruiting firms who meet the following criteria: 1. Have a valid fully-executed written contract with Griffith Company for service (signed only by our CEO, President, Executive Vice President or Human Resources Director). No other Griffith Company employee is authorized to bind Griffith Company to any agreement regarding the placement of candidates by Agencies., 2. Responding to a written request from a member of our Human Resources team to work on filling a specific job opening - we will not accept any unrelated resumes. In the cases of staffing agencies/recruiting firms that meet the above criteria: we will not consider a presentation of a candidate to us as accepted unless a member of our Human Resources team expresses in writing to your firm/agency an interest in engaging with a candidate that is being presented. The act of a firm/agency simply sharing a candidate resume or profile with a hiring manager or any other Griffith Company employee by email, text or any other communication method will not suffice as Griffith Company's acceptance of a candidate. Powered by JazzHR 1NkWHKVUkB

Job DescriptionDescription: Superior Electrical, Mechanical, and Plumbing, Inc. is a state-wide service provider specializing in skilled trade services. As a Plumbing Technician, you will be responsible for performing commercial plumbing repairs and service without the pressure of selling plumbing jobs. Work schedule Monday through Friday from 10 p.m. to 6:30 a.m. The position provides a two-week training period and yearly performance reviews. Technicians will be provided with a company vehicle, gas card and have the flexibility to begin their service routes from home or the regional shop location. The ideal candidate will have a minimum of four years of recent experience in commercial plumbing service and repair. Responsibilities • Provide informative customer service to clients with professional conduct, • Install, repair or replace commercial plumbing fixtures and water heaters, • Properly diagnose and repair issues with sanitary waste, vent, or potable water pipes, • Service grease traps, interceptors, sump pumps or lift stations, • Troubleshoot common commercial plumbing issues on pumps, fixtures, valves, and DWV, • Diagnose and unclog drains with cable machines, hydro jets, or camera lines, • Submit service paperwork with a summary of the work provided after each service appointment, • Collaborate with team members to complete projects in a timely manner, • Drive and operate company vehicles within department guidelines, • Willingness to take on additional duties as needed to support the departmentRequirements:, • Four years of recent and relevant commercial plumbing experience, • Valid driver license with no more than two points or driving restrictions on the driving record, • Able to pass a pre-employment drug test, • Verbal and written English literacy for the use of cell phone and mobile email communication, • Superior Electrical, Mechanical & Plumbing, Inc. is a service and construction company providing customer service throughout California and other states. We offer competitive wages, medical coverage, 401(k) employee contributions, supplemental insurance options, sick leave, vacation time and skilled trade development

Job Description As a key member of our team, the Estimator will play a pivotal role in joining a well-established estimating team in support of our Executive Management and Project Managers through comprehensive estimating services. This position is central to our strategic planning and execution, requiring a proactive approach to collaborating with both internal stakeholders and external partners. The successful candidate will be responsible for building and maintaining robust professional relationships with our current and prospective clients, ensuring our participation in all sought-after bidding opportunities. Job Description: · Review Owner RFQ’s for revenue and margin potential; recommend to Executive Management for approval prior to bid. · Collect all drawings, specifications, and available job information for potential projects. · Ensure a thorough understanding of the scope of work, project timing, budgetary constraints, and jobsite conditions. · Attend all necessary job walks and pre-bid meetings. · Communicate with customers regarding specifications and expectations. · Create accurate and timely take-offs using OnScreen Takeoff, Destiny Estimator, Bluebeam, etc. · Utilize cutting-edge estimating software and technologies to enhance accuracy and efficiency in cost estimates. Stays abreast of advancements in estimating technologies to ensure the company remains competitive and efficient. · Solicit estimates from subcontractors for work that is not self-performed. · Skilled in negotiation with a strategic approach to securing the best pricing from subcontractors and vendors while maintaining quality and project requirements. · Strong analytical skills to evaluate bid specifications, drawings, and technical documents. Ability to perform complex calculations and analyses to ensure accurate and competitive bids. · Review job information to verify estimate accuracy and ensure profitability estimate is within corporate guidelines. · Prepare accurate project pricing breakdown. · Maintain the proposed project schedule. · Manage profiles and proposals from projected subcontractors. · Produces statement of qualification and capability. · Provides profiles of the project management team. · Ensures that the client thoroughly understands all aspects of the proposal. · Creates the opportunity to negotiate or present options to maintain a competitive position in the bidding field. · Develop an understanding of why unsuccessful bids were not accepted. · Ensures that all bids prepared provide adequate profit potential by targeted margin goals. Desired Skills & Experience: · 5+ years of experience delivering projects from $1 million to $10+ million · Significant local experience in the Los Angeles, Orange County, Riverside, Ventura, and San Diego Areas · Proficient with Destiny Estimator, Destiny Bid Day, BuildingConnected, Revu Bluebeam, Adobe, Microsoft Suite, Microsoft and other construction-related software. · Knowledge of sustainable construction materials, methods, and practices. Ability to integrate these into project estimates to meet or exceed environmental and sustainability goals. · Ability to adapt to changing market conditions, project requirements, and technological advancements. Flexibility to adjust estimates and strategies as needed to remain competitive and efficient. · Competent in scheduling and scheduling software (Microsoft Project or Primavera P6) · Exceptional presentation and communication skills · Ability to lead a team · Excels at customer relations · Excellent financial forecasting and reporting abilities · Consistent, uncompromising commitment to delivering quality work · Engineering, Construction Management, or Architectural Degree, or equivalent experience Company DescriptionHeadquartered in Irwindale, California, with operations in California and Arizona, for over 60 years PNG Builders been amongst the top builders in North America. Our ESOP owned multi-company will be pursuing an intelligent strategy to increase market share – organically and perhaps through acquisitions while maintaining our superb cost-efficient structure. Founded in 1959, PNG Builders is a well-established general contractor with an extensive portfolio in the medical, aerospace, entertainment, luxury retail, housing, and energy market sectors. PNG’s capabilities include delivering large-scale ground-up projects as well as highly technical and complex tenant improvements within operating facilities. More information about the company can be found at: in Irwindale, California, with operations in California and Arizona, for over 60 years PNG Builders been amongst the top builders in North America. Our ESOP owned multi-company will be pursuing an intelligent strategy to increase market share – organically and perhaps through acquisitions while maintaining our superb cost-efficient structure. Founded in 1959, PNG Builders is a well-established general contractor with an extensive portfolio in the medical, aerospace, entertainment, luxury retail, housing, and energy market sectors. PNG’s capabilities include delivering large-scale ground-up projects as well as highly technical and complex tenant improvements within operating facilities. More information about the company can be found at:

Job Description CNC Mill or Lathe Machinist – 1st and 2nd Shift Immediate Temp to hire position – City of Monrovia, CA Essential Functions: • Perform Set-Up’s and Operate CNC Mill/Lathes Machines According to Process Sheets under General Supervision (Intermediate Level)., • Perform CNC Mill Set-Up’s and Operate CNC Mill/Lathes Machines According to Process Sheets with No Supervision or Assistance (Advanced Level)., • Create (Advanced Level); Edit, Send, or Retrieve CNC Programs From Systems Files as Required For Mill Machine Set-up and Operation., • Read and Interpret Manufacturing Paperwork (Travelers, Blueprints, Sketches, Etc.) in Order to Produce Products as Required by Customer Specifications and Quality Standards., • Inspect and Verify Own Work Prior to Submitting to Quality Department For First Article Inspection., • Meet Needed Quote Times and Schedule for Assigned Work., • Correctly Process Required Work-Related Paperwork and Material Requirements Planning (MRP) Documents., • Communicate Regularly With Supervisors and Other Employees Regarding any Production Issues and Ways to Eliminate Possible Errors on Set-up and/or Programming., • Perform Non-CNC Tasks When Necessary, such as Hand-Work Operations., • Evaluate and Update “Estimated to Actual” Cycle Times., • Conduct All Shop Functions in a Safe Manner., • Minimum of 3 Years of Relevant CNC Mill/Lathe Machine Experience is required (Intermediate Level). Certificate from NTMA or Other Technical School is a Plus., • Firm Understanding of Mill Programs Including Formatting and Editing Programs., • Ability to Read and Understand Blueprints and Technical Documents., • Ability to Use Various Inspection Tools Such as Micrometers, Calipers, Height Gages, and Comparators., • Familiarity with Coordinate Measurement Machines (CMM) is desired (Advanced Level)., • Strong Shop Math Skills Including the Ability to Perform Measurement Conversion., • A Genuine Belief in Continuous Improvement and a Disciplined Process., • Organization and Time-Management Skills., • Excellent Verbal and Written Communication Skills.Company DescriptionAs a women/minority owned staffing company, we currently are certified with the following organizations: SBA 8(a), Southern California Minority Business Development Council, Metropolitan Water District of Southern California, Women Business Entity, Minority Business Entity, and as a Disadvantaged Business Entity.As a women/minority owned staffing company, we currently are certified with the following organizations: SBA 8(a), Southern California Minority Business Development Council, Metropolitan Water District of Southern California, Women Business Entity, Minority Business Entity, and as a Disadvantaged Business Entity.

Job DescriptionPosition Overview We are seeking a detail-oriented and motivated Mechanical Project Engineer with a strong background in HVAC and plumbing systems. This role is integral to supporting project managers and senior engineers in delivering high-quality mechanical design and construction projects. The ideal candidate will be capable of balancing technical design responsibilities with project coordination, ensuring projects are completed on time, within budget, and to the highest quality standards. Key Responsibilities * Collaborate with project managers, senior engineers, and field teams to support HVAC and plumbing projects from design through completion. * Assist with project planning, scheduling, and budget tracking. * Review and assemble project documentation including submittals, RFIs, change orders, and purchase orders. * Support mechanical system design by performing load calculations, equipment selections, and layout coordination. * Work with clients, architects, contractors, and consultants to address project requirements and resolve technical challenges. * Conduct site visits, inspections, and field coordination to verify installation quality and compliance with design documents. * Maintain project records and provide timely updates and reports to management. * Ensure adherence to applicable building codes, energy standards, and company policies. Qualifications * Bachelor’s degree in Mechanical Engineering or related field required. * EIT certification preferred; PE license is a plus. * 2–5 years of experience in mechanical project engineering, with a focus on HVAC and plumbing systems. * Strong understanding of building codes and industry standards (ASHRAE, NFPA, IPC, etc.). * Proficiency in Revit, AutoCAD, Bluebeam, and Microsoft Office Suite. * Excellent communication, organizational, and time management skills. * Ability to manage multiple assignments, prioritize tasks, and work both independently and in team environments. Why Join * Opportunity to work on diverse and technically challenging projects in HVAC and plumbing. * Collaborative environment with exposure to both design and construction phases. * Career growth potential with mentorship from senior engineers and project managers. * Competitive compensation and benefits package.

Job Description Can you confidently assess plumbing issues and close deals with ease? Ready to join a top-tier team where your hard work truly pays off? Look no further-Top Notch Plumbing, Inc. is hiring a full-time Plumbing Sales Specialist - Plumber in Covina, CA! If you thrive on building customer relationships, providing expert plumbing solutions, and taking charge of your financial future, this is the opportunity you've been waiting for! Earn between $60,000 and $110,000 per year! We believe in investing in our team, which is why we offer incredible benefits, including: • A retirement plan, • Paid training, both in-house or out with companies, • Continued education to help you earn certifications, • Work vehicle to take home for technicians WHAT YOUR DAY IS LIKE As a Plumbing Sales Specialist - Plumber, your day is all about helping customers find the right solutions. You spend most of your time bidding work and closing sales, using your plumbing expertise to explain the best options for each job. Whether it's residential projects or the occasional industrial job, you know how to assess needs and guide customers to the right decision. While your primary focus is sales, you're always ready to step in and perform the work when needed. No matter the task, you maintain professionalism and ensure every client receives top-tier service from start to finish. WHO ARE WE? We're not just your average plumbing company – we're a tight-knit team dedicated to excellence in trenchless pipelining and plumbing services. What sets us apart? We prioritize our employees' well-being by offering an array of benefits and perks. Our employees also rave about our inclusive culture and supportive work environment, where they enjoy flexible scheduling options and feel valued with company input on retirement planning. Join our team and be part of a company that invests in your success and fosters a rewarding career journey! WHAT'S NEEDED FROM A PLUMBING SALES SPECIALIST - PLUMBER? We're looking for someone who can commit to a stable, full-time schedule, where you'll work 8-hour shifts, 5 days a week, within our operating hours of 8:00 AM – 8:00 PM, Monday – Saturday. Here's what you'll need to qualify: • 3+ years of professional plumbing experience, • Valid driver's license and a clean driving record, • Ability to work in tight spaces and lift 50 pounds Job Posted by ApplicantPro

Job DescriptionDescription: About the company: Burton James, recognized for its high-quality custom seating and home furnishings, is a privately owned, founder-led company with a fast-paced, entrepreneurial culture. We design, sell, and distribute luxury custom seating to interior designers and boutique/luxury retailers around the world. About the Role: We are looking for a skilled and detail-oriented Upholsterer to join our team of artisans. In this role, you will be responsible for expertly upholstering high-end, made-to-order furniture with precision and care. This position requires proficiency in full-piece upholstery including both inside and outside work across a range of frame styles, dimensions, and specialty details. This individual embraces and supports our in-person/on-site work culture and embodies our company values of Ownership, Collaboration and Respect. What you can do for us: • Complete entire upholstery jobs independently from frame prep to final detailing including measuring, fitting, and applying fabric, leather, or vinyl., • Install foam and padding and complete both interior and exterior upholstery with high craftsmanship., • Utilize advanced techniques such as channeling, skirts, nail head/pin nails, and precise pattern alignment. (Tufting experience is a plus but not required.), • Interpret work orders, CAD drawings, photos, and customer specifications with accuracy., • Inspect frames, foam, and materials before and during assembly to ensure quality; flag any issues immediately., • Consistently meet or exceed quality and productivity expectations with minimal supervision., • Work cross-functionally with other departments to identify potential challenges early in the process., • Install final components such as bases, legs, and arms to complete each piece. Additional Expectations • Arrive on time and communicate proactively regarding tardiness or absences., • Maintain a clean and organized workstation, care for tools and equipment, and follow all safety guidelines., • Adhere to PPE requirements and demonstrate accountability for a safe working environment. What we can do for you: • Play a pivotal role in our company’s transformation and growth, • Align with a growing company that operates in the luxury market, • Provide training and career development opportunities, • Offer 3 weeks paid time off and 6 paid holidays per service year, • Enjoy a high-paced and collaborative work environment, • Receive up to 6% 401k employer contributionsRequirements:, • 5+ years of professional upholstery experience in a custom, high-end, or made-to-order furniture environment is required; 8–10+ years is highly preferred., • While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to sit; stand; walk; use hands to finger, handle or feel; as well as reach with hands and arms., • The employee must frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds with the assistance of team members. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus. CompensationStarting base pay: $23.00 - $25.00+ per hour. Exact compensation may vary based on skills, experience, and location.

Job Description Responsibilities A Diesel Service Technician is responsible for providing service & repair to our customers' fleet via assigned truck and equipment repairs, while maintaining exceptional customer service. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Cleaning, maintenance, visual inspection, and removal of parts and attachments., • Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • Develop and maintain positive relationships with customers to increase overall customer satisfaction. Basic Qualifications: • High school diploma or general education degree (GED), • 5 years’ experience as a Class 7 & 8 technician in a dealership or related truck service facility, • Valid driver license (CDL a plus!), • Peterbilt, International, Ford, Hino, Isuzu, Cummins, &/or ASE certifications are preferred & rewarded Total Rewards & Compensation: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Job Summary: With little or no assistance, the CNC Machinist will operate CNC machines and conventional machines to produce complex aerospace parts demonstrating advanced cross training flexibility. They will have experience with most, if not all automated CNC machines and their operational capabilities. Essential Functions: • Fully operate multiple machines as needed, including CNC and conventional machines, • Perform pre-operational inspections, • Studies blueprints, manuals, dispatch specifications to determine dimensions and tolerances of finished work pieces, sequence of operations and setup requirements, • Perform complex set ups without assistance on multiple machines; checking or changing chucking jaws, tools, rotating off sets, etc, • Operates sit down forklift to retrieve parts and load them onto racks, • Utilize cranes and hoists to load and unload parts from racks onto machines, • Operate machines on trial run to verify accuracy of machine settings and programmed controls, • Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines, • Calculates and sets controls to regulates machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media., • Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls as required Verifies conformance of finished workpieces to specifications, • In accordance with Company policies, promote safety by working in a safe manner at all times, • Sweep and maintain clean area surrounding machine, • Remove any trash from work area, • Write up completed job orders, • Maintain traveler package, generate traceable paperwork, • Maintain Quality records, • Operate the Gun Drill and other cutting tools to perform perforations, • Confers with engineers, production personnel, programmers or others to resolve machining problems, • Perform other duties as assigned by managementCompany DescriptionWe're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.We're not just a staffing company - we're a people company. At Amtec, we care about helping you reach your unique career goals. Since 1959, we’ve changed the lives of thousands of people for the better - people just like you. It’s our purpose to help you find meaningful work by matching your character, competence, and culture with an organization that truly values what you have to offer.

Job Description Responsibilities The Body Shop Estimator solicits sales for the body shop through personal and telephone contacts. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and dealerships. Responsibilities: • Estimates must be accurate and completed within 48 hours of contact. Department estimates must be verified to match insurance appraiser estimates, any discrepancies must be resolved prior to dispatching job to the shop or shop foreman., • Service existing accounts and communicate with clients to provide leads for additional business., • Discuss use and features of various services., • Verify credit status of all customers before starting any work., • Visit assigned accounts soliciting maintenance and repair business., • Communicate supplements to customers and insurance companies on the same business day as written., • Coordinate with insurance adjusters and wrecker operations., • Communicate with and update customers daily via service link during the repair process. Estimators are required to follow every job from start to finish, review final billing, and secure before and after photographs of work performed., • Consult with management regarding new procedures and equipment in the industry. We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED)., • Minimum 12 months related work experience in a similar position. May substitute the equivalent combination of education and training., • Must possess a current and valid driver license with a driving record that meets the insurability guidelines set forth by the company’s insurance carrier., • Personal computer hardware/software knowledge and skills. Proficiency with related hardware/software systems as needed to fully execute the duties required. This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled

The ideal candidate will have a wide range of responsibilities including maintenance, repair, and calibration of field equipment. The successful candidate will be a problem solver who is responsive to customers' needs. Responsibilities • Complete and turn in field reports that capture all time and work completed on site, • Provide diagnostic analysis, repair, or preventative maintenance to customers, • Complete on-site system audits and evaluations, • Practice and adhere to all safety and training Qualifications • Friendly customer service personality, • Currently working with industrial machinery, • Basic electrical and mechanical engineering skills, • Ability to travel around Los Angeles and occasionally Phoenix, • Ability to lift up to 75 pounds

Job Description Monarch Power Supply is hiring at our City of Industry location. The Monarch Master Diesel Technician will be responsible for performing service calls that will require highly skilled and expert level repairs on industrial diesel engines. These repairs will require extensive knowledge of electrical, hydraulic, pneumatic systems and the candidate must be able to work independently, exhibit leadership skills, and mentor inexperienced technicians. Responsibilities Essential duties and responsibilities of a Monarch Master Diesel Technician include the following. • This position requires advanced knowledge of diesel or gas engines, electrical and electronics., • Complete assigned jobs and task to meet flat rate times and re-do metric., • Work safely and follow all safety policies and procedures., • Complete related paperwork and access databases required to complete job (EST, SPI) accurately and timely., • Advanced understanding of products, benefits (Should this be procedures?), and applications., • Remove and install parts, disassemble, and assemble components, and test and adjust, • Assemble various engines with minimal supervision, • Communicate effectively with customers on diagnostics and engine repairs, • Train and mentor inexperienced Service Technicians (i.e., Levels I & II), • Travel up to 10% for training and overnight field work., • Two-year certificate from accredited college or diesel technician program. (preferred), • 7-10 years' experience as a diesel mechanic; or equivalent combination of education and experience., • Must have experience in Diesel Engine Technology., • Must supply his/her own mechanic tools and have general knowledge of basic hand tools, air tools, precision measuring tools., • Must be able to work in adverse weather conditions., • Must be able to work in and support a “TEAM” environment., • Must be willing to travel as support for field service projects, as they dictate., • Understanding and compliance with Customer Safety Rules and Company Policies., • Must be able to install, set up and troubleshoot and repair engine control systems., • Must have in-depth knowledge of Diesel systems and products, including Perkins EST., • Must be competent with full diagnostics and tear down and reassembly, as well as removal and installation of all diesel engines in OEM machinery., • Must have a valid driver’s license and clean driving record, • Ability to obtain a CDL Driver’s License, • Excellent customer service skills, • Leadership and the ability to mentorship inexperienced Service Technicians, • Must be able and willing to travel as support for field service projects as needed, • Ability to sit, stand and walk for extended periods of time., • Ability to bend, balance, stoop, and kneel., • Ability to use repetitive motion with hand tools as well as phone, computer, keyboard, and mouse., • Ability to see, hear, and talk with necessary individuals who this role will partner with., • Ability to travel by car or plane for extended periods of time.

Job DescriptionHave you dreamed of working in the medical field but weren’t sure where to start? Do you want to use your strong interpersonal skills to help others? Are you an organized person who likes working in a team environment? If so, a position as an ophthalmic technician might be the fit for you. Ophthalmic technicians are one of the most sought-after medical professionals, and the position allows for career growth and certification. As an ophthalmic technician, you’ll perform an extensive number of data collection functions to allow for the proper professional diagnosis of patients’ conditions. Join Visionary Eye Institute to be fully trained in this exciting position and start your new career! Visionary Eye Institute was founded by Dr. Ehsan Sadri in 2019 to advocate for all communities by providing innovative and life-changing eyecare. Our practice specializes in medical eyecare and surgery, and we also have a clinical research division that allows us to offer the highest-level care to Los Angeles and Orange County. We have excellent benefits including paid holidays, medical/dental benefits for full-time employees, and much more. Come join our caring and professional team today! EDUCATION AND EXPERIENCE: 1. High school diploma; some college preferred., 2. Experience within a professional environment with a strong customer focus. ESSENTIAL SKILLS AND ABILITIES: 1. Strong communication and interpersonal skills., 2. Empathetic personality with concern for patients’ needs., 3. Strong organization with attention to detail., 4. Ability to work as a team member., 5. Demonstrated computer literacy., 6. Demonstrated ability to learn and apply training. KEY RESPONSIBILITIES: 1. Communicating to patients, including informing patients about tests and obtaining patient history., 2. Performing accurate and consistent documentation and measurement tasks., 3. Performing duties consistent with ophthalmic writer/scribe., 4. Assisting physicians as needed., 5. Performing patient triage., 6. Maintaining instruments., 7. Performing administrative duties including confirming appointments and maintaining cleanliness.

Job DescriptionDescription: About the company: Burton James, recognized for its high-quality custom seating and home furnishings, is a privately owned, founder-led company with a fast-paced, entrepreneurial culture. We design, sell, and distribute luxury custom seating to interior designers and boutique/luxury retailers around the world. About the Role: We are looking for a skilled and detail-oriented Upholsterer to join our team of artisans. In this role, you will be responsible for expertly upholstering high-end, made-to-order furniture with precision and care. This position requires proficiency in full-piece upholstery including both inside and outside work across a range of frame styles, dimensions, and specialty details. This individual embraces and supports our in-person/on-site work culture and embodies our company values of Ownership, Collaboration and Respect. What you can do for us: · Complete entire upholstery jobs independently from frame prep to final detailing including measuring, fitting, and applying fabric, leather, or vinyl. · Install foam and padding and complete both interior and exterior upholstery with high craftsmanship. · Utilize advanced techniques such as channeling, skirts, nail head/pin nails, and precise pattern alignment. (Tufting experience is a plus but not required.) · Interpret work orders, CAD drawings, photos, and customer specifications with accuracy. · Inspect frames, foam, and materials before and during assembly to ensure quality; flag any issues immediately. · Consistently meet or exceed quality and productivity expectations with minimal supervision. · Work cross-functionally with other departments to identify potential challenges early in the process. · Install final components such as bases, legs, and arms to complete each piece. Additional Expectations · Arrive on time and communicate proactively regarding tardiness or absences. · Maintain a clean and organized workstation, care for tools and equipment, and follow all safety guidelines. · Adhere to PPE requirements and demonstrate accountability for a safe working environment. What we can do for you: • Play a pivotal role in our company’s transformation and growth, • Align with a growing company that operates in the luxury market, • Provide training and career development opportunities, • Offer 3 weeks paid time off and 6 paid holidays per service year, • Enjoy a high-paced and collaborative work environment, • Receive up to 6% 401k employer contributionsRequirements: · 5+ years of professional upholstery experience in a custom, high-end, or made-to-order furniture environment is required; 8–10+ years is highly preferred. · Strong ability to interpret shop drawings, CAD files, or reference photos to bring a designer’s vision to life. Physical Requirements: The physical demands described here are representative of those that are required by an employee to successfully perform the essential functions of this job. · While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to sit; stand; walk; use hands to finger, handle or feel; as well as reach with hands and arms. · The employee must frequently lift and/or move up to 50 pounds, and occasionally lift and/or move up to 100 pounds with the assistance of team members. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus. · Ability to work in open environment with fluctuating temperatures and standard lighting. Other Considerations: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Reasonable accommodations may be made to qualified individuals with disabilities to enable them to perform the essential functions of the role. Compensation Starting base pay: $23.00 - $25.00+ per hour. Exact compensation may vary based on skills, experience, and location.

Job Description 8-hr shifts | Full-time AM Shift | PM Shift Weekend availability a must! We have openings for Behavioral Health Technician / Behavioral Health Specialist. What We Do: Charter Oak Hospital offers compassionate and individualized treatment for mental health and substance use disorders. We believe in a patient-centric approach, where every treatment plan is tailored to meet the specific needs of each person who walks through our doors. What You’ll Do: Our Behavioral Health Specialists make a difference in the lives of our patients. Our dedicated professionals work tirelessly to create an environment that fosters healing, growth, and long-term wellness. This position provides direct patient care to patients with emotional or psychiatric disorders, accompanies and transports patients, participates in patient treatment plans, ensure safety and well-being of these patients and other duties as assigned. You will learn about the world of behavioral health and develop a lasting career in healthcare. Join us in making a meaningful impact in the lives of those we serve! Aurora Charter Oak Hospital has been delivering Behavioral Health Treatment Services for over 83 years. We are located on 10 acres of beautifully landscaped grounds in Covina, California. Covina is about 22 miles east of downtown Los Angeles, in the San Gabriel Valley, close to 10, 60 and 210 FWY. EEOC Employer. Aurora Charter Oak Hospital does not discriminate against any person on the basis of race, color, national origin, sexual orientation, disability, or age in admission, treatment, or participation in its programs, services and activities, or in employment. We participate in the E-Verify program. Follow the link for additional information. Requirements Education & Experience: · High school degree, GED or equivalent required · Registered behavioral technician (RBT) experience is a PLUS · Healthcare experience required · Hospital experience highly preferred – Medical Assistant, Caregiver, Nursing Assistant · Familiarity with medical and psychological terminology · Basic knowledge of human behavior or principles of psychology · Ability to maintain confidential information · Ability to maintain professional boundaries and willingness to seek supervision in this regard · Current BLS for healthcare provider card upon hire · Therapeutic Options™ (TOT) to be obtained prior to providing direct patient care without a preceptor Benefits • 401(k), • Dental insurance, • Employee assistance program, • Employee discount, • Flexible spending account, • Health insurance, • Life insurance, • Paid time off, • Vision insurance

Job Description Responsibilities A Body Shop Technician will repair or replace damaged body parts back to Pre-Accident Condition with factory and dealership specifications. Quality repair need to meet or exceed the original factory fit and finish. The end result should be an invisible repair. Rush Truck Centers opens the door to the world of opportunity. We are the largest network of commercial vehicle dealerships across the US representing truck and bus manufacturers. Our franchises include Peterbilt, International, Hino, Isuzu, Ford, IC Bus and Blue Bird. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Review each repair order, work order, and estimator’s notes to understand repairs needed prior to beginning work on the vehicle., • All repairs must be completed according to the documentation on the repair order or the supplement., • Knowledge of the manufacturer’s and technical repair process., • Ability to use frame and measuring equipment per vendor procedures., • Perform initial teardown of vehicle., • Identify parts for cut-in and edging., • Perform all repair procedures according to factory specifications and company policy., • Perform and sign-off on all quality check before sending vehicle to paint department., • Re-assemble painted vehicle and painted parts., • Perform a final quality check and review of work order prior to sending the vehicle to the detail department. Basic Qualifications: • High school diploma or general education degree (GED)., • Two years’ body shop experience., • Valid driver’s license and insurability. Total Rewards & Compensation: • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Job Posting: Auto Body Technician Location: Bravo’s Auto Body 8503 Whittier Blvd, Pico Rivera, CA 90660, USA Job Type: Full-Time About Us: At Bravo's Auto Body, we pride ourselves on delivering top-quality repairs and exceptional customer service. Our team utilizes cutting-edge tools and equipment, including spot welders, aircraft-grade 3-dimensional measuring systems, and MIG/TIG brazing units, to ensure every vehicle is restored to its original condition. We understand that collision repairs can be a stressful experience for our customers, and we strive to provide personalized solutions that treat them like family. Position Overview: We are seeking a skilled and dedicated Auto Body Technician to join our dynamic team. In this role, you will be responsible for performing high-quality repairs on vehicles while following our meticulous blueprinting process. This involves creating detailed and comprehensive repair orders that go through multiple reviews to ensure accuracy and quality. We provide ICAR training for any candidate that shows a willingness to learn and grow! Key Responsibilities: · Perform auto body repairs using advanced tools and techniques. · Conduct thorough assessments of damaged vehicles and develop repair plans. · Create detailed repair orders through our blueprinting process. · Collaborate with team members to ensure high-quality workmanship. · Uphold safety standards and maintain a clean and organized workspace. Requirements · Proven experience as an Auto Body Technician or similar role. · Proficiency with auto body repair tools and equipment. · Strong attention to detail and commitment to quality. · Excellent communication and customer service skills. · Ability to work in a fast-paced environment and meet deadlines. · ICAR Certifications are a major plus. · Valid driver's license and a clean driving record. Benefits · Competitive salary and benefits package. · Ongoing training and professional development opportunities, including ICAR. · A supportive and family-oriented work environment. · The chance to work with cutting-edge technology in the collision repair industry. If you're ready to take your career to the next level and be part of a team that goes the extra mile for our customers, we want to hear from you! Join Bravo's Auto Body and help us deliver exceptional service and top-notch repairs while building lasting relationships with our customers!

Job Description Position Summary: The Machine Technician is a hands-on professional who is responsible for coordinating efforts with Millwrights and others to meet the technical demands of installing, de-installing, aligning, and preparing complex or sensitive machinery – including CNC equipment – for transport and/or recommissioning. Essential Job Duties and Responsibilities: • Safely install, de-install, and relocate CNC and industrial equipment for a variety of clients (aerospace, medical, manufacturing, and defense industries) according to customer specifications and company protocols., • Conduct full machine diagnostics and condition reports prior to decommissioning. Document any operational issues or special handling requirements., • Disassemble complex machines, with attention to machine sequencing, component labeling, and protection of sensitive elements (ball screws, spindles, wiring looms, etc.)., • Label and organize wiring, hydraulic lines, and hardware to ensure a smooth and error-free recommissioning process., • Use precision tools such as laser alignment systems, optical tooling, dial indicators, machinist levels, etc. to align, level, and calibrate machinery post-move., • Read and interpret mechanical, electrical, and fluid schematics or technical manuals for de-installation and reinstallation., • Troubleshoot CNC and programmable logic-controlled equipment, verify control logic, test motor function, and assist with I/O checkouts during recommissioning., • Work directly with rigging crews to plan critical lift paths, machine orientation for egress, and safe removal under tight clearances or height/width restrictions., • Prepare machines for transport: drain fluids and ensure proper storage or disposal, moving parts are locked out, and high-precision components are protected against vibration or moisture., • Oversee and/or assist with crating, blocking, and bracing machinery for over-the-road transport; ensure compliance with DOT safety standards for the movement of heavy or oversized equipment., • Coordinate with electricians, millwrights, and outside vendors or contractors for complex power drops, disconnects, and reconnections., • Assist in start-up and recommissioning procedures, including program loading, zero return, spindle warm-up, and part(s) test verification as required., • Serve as technical liaison to customers; explain the work performed and assist in the resolution of installation or equipment function issues., • Complete, maintain, and submit accurate and timely reports and documentation for all job activities, including condition reports, punch lists, service checklists, time sheets, and sign-offs., • Assist with the management of inventory relating to rigging and maintenance tools or equipment. Identify service or calibration needs, as necessary., • Assist with training and/or act as mentor to junior technicians. Follow and demonstrate company procedures, and best practices for mechanical integrity and customer service, and encourage this with others., • Operate powered industrial equipment such as forklifts, scissor lifts, telehandlers, and overhead cranes, keeping compliance with site-specific standards and OSHA safety requirements., • Demonstrate and enforce rigorous job site safety standards, including but not limited to PPE use, lockout/tagout, confined space, or lift planning., • Work with dispatch and project managers to provide real-time updates; manage change when field conditions differ from planned job scope., • Provide feedback on customer sites to help the sales team develop accurate quotes, timelines, and recurring service opportunities., • Associate degree in Mechanical Engineering, Industrial Maintenance, Mechatronics, Precision Machining, or related field required; bachelor’s degree preferred., • Technical certification or Vocational Trade School diploma for CNC repair / operations, Industrial or heavy machinery mechanics, Millwright technology, automation, or electrical/mechanical certification highly preferred., • Forklift or crane operation certification helpful., • Strong understanding of basic CNC programming and diagnostics., • Ability to read and interpret mechanical, electrical, and hydraulic schematics. Technical writing knowledge helpful., • Experience or background in machine tool installation, millwright work, or rigging necessary., • OSHA 10/30 or other safety certification a plus., • Skilled in the use of hand and powered tools used to align, level, or set heavy machinery., • Valid driver’s license or ability to attain quickly. Willing and able to travel locally or regionally to various jobs or work sites; able to meet customer site requirements for job site access., • Must be flexible and adaptable to highly dynamic job schedules and environments., • Professional demeanor with a customer-focused mindset. Able to communicate effectively across all levels of understanding for a diverse workforce. This is physical, hands-on work. Must be able to perform General Physical Activities that require considerable use of arms, legs, and activities requiring moving the whole body such as climbing, lifting, balancing, walking, stooping, or crouching. May regularly lift or move items weighing up to 50 pounds. Frequently uses senses involving sight, smell, touch, and auditory. May work off the ground at varying heights; must not be affected by flashing lights, noise, or moving machinery. May perform occasional work in a warehouse or non-temperature-controlled environment and/or outdoors over uneven terrain or with exposure to inclement weather. Travel by automobile, as necessary. Additional Requirements: Work with a Top-of-Mind Awareness for the safety of yourself and everyone at the job site. Must be able to work in a high functioning team environment. Display the highest levels of honesty, integrity, and professionalism. Take pride in your work and in the company. Communicate openly and strive for peak performance in daily tasks. Know and deliver the quality service MEI’s customers have come to expect. Disclaimer: This job description is intended to summarize the type and level of work performed by a Machine Technician and is not an exhaustive list of all duties, responsibilities, and/or requirements. MEI reserves the right to change or modify this job description or the essential duties of the job, as necessary. MEI is an Equal Opportunity, M/F/Disabled/Vet Preferred Employer.

Job DescriptionBenefits: • 401(k), • Company parties, • Paid time off Job Description The Irrigation Foreman is responsible for the install and maintenance projects. The foreman is responsible for completing these projects with great precision and business minded efficiency. Overseeing crews ranging in size from one to ten depending on the job type and size. Primary Functions Direct Activities on the job site, they include but are not limited to: Coordinating work flow, hands on work, and operating machinery. Manage personnel effectively and efficiently. Communicating production goals and other items with crew members, lead Gardners, and Customers. Train and promote the development of crew members in the best practices of installation and company standards. Monitor all tools, equipment and machinery for the needed maintenance and installation. Track and record all job expenses, including but not exclusively hours and materials used. Maintain a clean and safe job site at all times, Trucks are kept clean and equipped with the correct and working tools. Responsibilities Supervise and manage Irrigation crews. Ensures that each crew member is trained appropriately for each designated job assignment. Participates in and conducts all job site safety meetings with the crew. Ability to drive a pickup truck and tow a single or double axel trailer. Ensures that all crew members utilize the required personal protective equipment (PPE). Understands and instructs crew members on proper job site security procedures Ensures that all installation and maintenance work is performed in accordance with company standards. Ensures that all equipment and safety procedures are followed. Performs administrative functions pertaining to crew members. Interacts with customers to ensure job satisfaction. Supervises all crew members during the performance of all assigned work. Works with crew members on site to ensure a good healthy working environment. Leads by example Reports for work at the assigned location and time each day. Ensures that all safety rules and company safety policies are followed. Participates in safety training sessions, always try to improve safety on the job site. Communicates clearly with the customer in Spanish or English whatever is needed to complete the communication chain. Strives to improve his or her job skills for potential upward mobility Tracks and records all job expenses and hours accurately. Ensures the office personnel have the correct paperwork for each job. Train crew members the best practices of installation and maintenance in the company standards. Know and component in the completion of all the tasks and responsibilities of the Gardner and the Lead Gardner. Ability to read and understand Architectural drawings and implement these drawings on a job site. Ability to understand and install Low Voltage lighting and Irrigation materials. Ensure the proper function of both. Repair irrigation and low voltage problems to create a safe and beautiful landscape. Trained in basic first aid requirements. Know how to identify hazardous situations and eliminate them on a job site. Applies pesticides and herbicides to the landscape area. Working Environment The usual and customary methods of performing the jobs functions require the following physical demands: significant lifting, carrying, pushing and or pulling. Frequent climbing and balancing; significant stooping, kneeling crouching, and or crawling. Generally, the job requires 5% sitting, 45% standing, and 50% walking. The job is performed under some temperature extremes and under conditions with exposure to risk of injury and or illness. Requirements Ability to work in all weather conditions. California Drivers License and the ability to tow a single or double axel trailer. Knowledge of perennials, shrubs, evergreens, and trees. Identification and cultural requirements. Highly motivated, self-driven individual who is detailed oriented Verbal and written skills, basic computer skills. Ability to multi task, and to prioritize on the job site Punctual and dependable Ability to work overtime and weekends if needed. Experience Minimum 5 years of irrigation experience, with increasing levels of responsibility desired in the landscape industry Additional Experience: Additional Compensation if able to Operate Heavy Machine i.e. CAT MACHINERY Required Testing Pre-Employment medical examination Pre-employment Physical capabilities test Certificates & Licenses Valid Drivers License Meet I-9 requirements

Job Description Design Engineering Technician General Description The DesignEngineering Technician provides a crucial link between customer requirements and the final product that we deliver to our customers. They provide the primary technical interface between office management and the factory by working on product design, cost estimating, factory order (job) creation and purchase order generation, and preparing necessary documents for these transactions. Job Responsibilities · Interpretation of customer production specifications in the form of drawings (blueprints), samples or application requirements. · Analysis of product material and configuration specifications to determine the suitability of form, fit, and function. · Analysis of product specification and tolerance concerning quality versus manufacturing process capabilities. · Determination of manufacturing process including product structure (bill of materials), manufacturing routing(s), outside service processes, and the application of manufacturing engineering standards. · Preparation of cost estimates in support of sales and customer service to determine prices and subsequently acknowledge quotations to customers. · Preparation of product documentation, including factory orders and purchase orders. · Review customer's order instructions and blueprints to ascertain test specifications, procedures, and objectives, and resolve technical problems such as redesign. Qualification Requirements · Degree from Trade School, or A.A.S. or equivalent in Engineering Technology or similar field · 3-5 years of experience · Strong computer skills, specifically Microsoft Excel and Microsoft Word · Experience with Solidworks · Aptitude for mathematics and physics · Excellent verbal and written communication skills · Fluency in written and spoken English Lee Spring Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability or genetics. In addition to federal law requirements, we also comply with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. We offer a generous benefits package, which includes

Job Description Why We Exist and What We Do: At Dr. Squatch (), we're raising the bar on men's personal care with our line of natural, high-performance products. We're on a high-growth, fast-moving ride, continually introducing new product categories, launching into retailers nationwide, and growing internationally. We have been recognized and certified by Great Place to Work® multiple times, and we achieved status as a certified B Corp in 2023. We are looking for passionate, talented people who want to join us in our mission to inspire and educate men to be happier and healthier! About the Role: Dr. Squatch Bricc City is looking for a Deodorant Quality Assurance Technician to join the team on the second shift. The QA Technician is responsible for performing inspections on incoming materials, in-progress processes, and finished goods per approved methods, procedures, and specifications. Inspectors interact with all levels of production management to ensure that finished goods meet required quality standards. • This role will report to the Quality Manager., • This is a full-time, on-site role with company benefits based out of Brea, CA., • Actively work with the production team leads to resolve identified nonconformities., • Issue NCMR's (Non-Conforming Materials Report) as required, • Sample incoming materials for retention and any testing deemed necessary., • Inspect and ensure line readiness for setup., • Follow through on start-up and approvals., • Document line inspections; provide dispositions on results of inspections., • Accurately complete all Quality Assurance forms., • Inspect packaging and/or finished product quality to meet specifications., • Visually inspect components to meet work order specifications., • Check weights to meet range specifications., • Submit samples from packaging inspections as required for development of masters, resolution of quality holds (incoming packaging inspectors only), • Ensure all employees adhere to GMP guidelines., • Test Finish Goods and create COAs, • Lab test bulk oil incoming materials, • Assist Supervisor with department monthly outputs and PowerPoint presentations, • High School Diploma or GED and 3 years of QA experience are highly preferred., • Ability to communicate, write, and read in English., • Excellent communication skills, • Experienced with measuring instruments (scales, calipers, calibrating thermometers), • Some lab experience with (force gauge, penetration equipment, FTRI), • Create COAs, • Computer literacy skills in Office: Microsoft Word, Excel, and Google Office Suite, • Experience working in the consumer products industry is highly preferred., • Problem solver with a sense of urgency, • Entrepreneurial mindset and ability to take ownership., • Must be open to work any shift. #LI-BD1 #LI-ONSITE #LI-FULLTIME Who We Are: Our core values come naturally and make us a better, more whole, and unique team. We are Bold & Innovative - we are creative, rethink how things are done, and find a way. We Play to Win - we have high standards, we encourage ownership of work, we are scrappy, we act with urgency, and we invest in the outcome of our work. We are Team Squatch - we are humble, help others outside our own wheelhouse, stay positive, have fun, and have approachable and transparent leadership. We offer a competitive salary in a growth-focused & collaborative team environment. Benefits include medical, dental, vision, 401k with Squatch match, and PTO. We also have great perks like healthy snacks, frequent company events, and of course, free products! For Applicants with Disabilities. Reasonable accommodation will be made so that qualified applicants with disabilities may participate in the application process. If you need any accommodations during the hiring process, please let us know when you submit your application and we'll do our very best to adjust as needed. For Information regarding Data Privacy, please review . Unsolicited Resume Policy. Dr. Squatch ("DRSQ") employs an internal Talent Acquisition department. Exceptionally, DRSQ may choose to supplement that internal team with support from temporary staffing agencies, placement services, and/or recruiting agencies ("Agency"). Agencies are hereby specifically directed NOT to contact DRSQ employees directly in an attempt to present candidates. DRSQ's Talent Acquisition team is responsible for all candidate presentations to our hiring managers. To protect the interests of all parties, Dr. Squatch will not accept unsolicited resumes from any source other than directly from a candidate. Any unsolicited resumes sent to DRSQ, including unsolicited resumes sent to a DRSQ email address or mailing address, directly to DRSQ employees, or to DRSQ's resume database will be considered property of Dr. Squatch. DRSQ will not pay a placement, service or other fee for any placement resulting from the receipt of an unsolicited resume. This also includes partial resumes, LinkedIn profiles, general candidate profiles, and/or candidate details or information. DRSQ will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. DRSQ's Talent Acquisition team must provide advance written approval to an Agency to submit resumes and/or profiles for a specific job-opening, and the approval must be in conjunction with a valid fully executed staffing, placement or other service agreement. DRSQ will not pay a fee to any Agency that does not have a fully executed agreement in place prior to submission, receipt and placement of candidates.

Job Description • Writes complete estimates/supplements in accordance with company and insurance guidelines with an emphasis on repairing versus replacing parts., • Takes clear and accurate photos of damages., • Order parts, check availability and ensure that we receive the accurate discount from all vendors., • Documents and track vehicle progress throughout the entire repair process. Update statuses in the production schedule., • Assigns labor to Technicians and Painter., • Educate the customer about the collision repair process; including insurance claims, processing, payment procedures, repair techniques, repair needs and approximate repair time., • Conducts daily meetings with front office staff to ensure accurate updates on vehicles are provided., • Finalize and line match supplements prior to vehicle delivery., • Confirm the insurance supplements are scanned and attached to estimating system., • Pre-close files for delivery., • Verifies the exceptions tab in the estimating system throughout the repair process., • Ensure all parts have been received and invoices are posted., • Confirms all labor has been assigned accordingly., • Ensures vehicles are inspected for quality control before vehicles are delivered to customers., • Delivers vehicles, explain areas of the vehicle that were repaired and answer any questions the customer may have., • Prepares file for final bill upload., • Make sure correct verbiage is used on estimate for final billing., • Document in notes that you have completed the file and upload for billing., • Requires little to no experience in discipline, • Minimum 4 year of collision auto body repair experience., • Knowledge of insurance procedures and requirements., • I-CAR certification., • Proficient in the use of estimating software CCC One., • 401(k), • Employee discount, • Life insurance, • Paid time off

Job DescriptionDescription: DIESEL MECHANIC Department: Fleet & Maintenance Location: SFS Shop - Santa Fe Springs, CA Classification: Full-Time, Non-exempt Reports To Fleet & Maintenance Director Position Summary Ecology Auto Parts Inc. is looking to fill a role of a Diesel Mechanic. As our new Diesel Mechanic you will perform diagnosis and preventive maintenance services as well as inspect, diagnose and repair on a variety of heavy-duty Diesel vehicles and trucks and equipment. You will support all aspects of the mechanical repair and maintenance of vehicles, machines, equipment and facilities. You will report to the local shop manager. Responsibilities To perform this job successfully you must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. • Performs repairs and assigned preventive maintenance services., • Performs inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment., • Works under limited supervision and selects from written instructions and established procedures to accomplish assigned tasks., • Maintains a clean, safe work area in compliance with Company / OSHA Standards and performs all work in accordance with established safety procedures., • Utilizes vehicle computer electronics systems to interpret failure modes to initiate or assign repairs., • Estimates time and material costs on vehicle repairs and requisitions new parts., • Performs service calls for emergency breakdowns., • Conducts annual safety checks on vehicles., • Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times., • Assist other mechanics in the completion of project work., • Reviews, completes or assigns repairs identified on Driver Vehicle Inspection Reports. Requirements: Qualifications/Knowledge/Critical Skills • Experience: Three (3) years of relevant work experience., • Valid driver’s license, • Must be at least 18 years of age., • Legally eligible to work in the United States., • High school diploma or equivalent., • Certification or diploma in automotive technology or a related field is preferred., • Proven experience as a diesel mechanic or a similar role., • Strong understanding of safety protocols and compliance standards., • Ability to read and interpret technical manuals and schematics., • Proficiency in using diagnostic tools and equipment., • Excellent problem-solving skills and attention to detail., • Ability to work independently and collaborate effectively in a team environment., • Strong time management and organizational skills., • Ability to perform physical requirements of the position with or without reasonable accommodations., • Successfully complete pre-employment drug screen, physical, and background check, which will include previous employment check, criminal history and motor vehicle record review., • Required to use motor coordination with finger dexterity (such as keyboarding, machine operation, etc.) most of the workday;, • Required to exert physical effort in handling heavy objects most of the workday;, • Required to be exposed to physical environment which involves dirt, odors, noise, weather extremes or similar elements often, • Works under moderate supervision, • Requires lifting up to 50-75 pounds, pushing, pulling and bending The Diesel Mechanic position offers a highly competitive hourly range of $25 to $32 per hour. In addition to the wages, we provide a comprehensive benefits package that includes medical, dental, and vision insurance, a 401k plan with employer matching, generous paid time off, and life insurance coverage. The final compensation package will be determined based on the candidate's relevant experience, qualifications, and skills. We are committed to offering a rewarding and competitive compensation package to attract top talent in the industry. PLEASE NOTE: This job description is not exhaustive and is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Ecology Auto Parts Inc. is committed to providing a workplace and culture of respect, diversity, equity, inclusion, and belonging. We are dedicated to ensuring equal employment opportunity without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. Should you have a disability or specific needs requiring accommodation, please inform us. Thank you for your interest in opportunities with Ecology Auto Parts, Inc. We appreciate the enthusiasm and professionalism demonstrated by individuals seeking to join our team. Please be advised that Ecology Auto Parts, Inc. does not engage with or entertain solicitations from third-party recruiting firms for our hiring needs. We have a dedicated internal recruitment team managing our talent acquisition process. We kindly request that third-party recruitment firms refrain from submitting candidates for our open positions. Ecology Auto Parts, Inc. will not consider or entertain candidates represented by headhunter agencies for our current requisitions. Our commitment to fair and equitable hiring practices includes working directly with candidates who apply through our official channels. We believe in fostering a transparent and direct relationship with potential team members. We appreciate your understanding and compliance with this policy. If you are interested in joining Ecology Auto Parts, Inc., please visit our official careers page here: EAP, Inc. | Career Center for a list of our current job opportunities and application instructions.

Job Description Quinn is hiring a Service Technician for out heavy equipment at our City of Industry, CA location. Upgrade your Career! Become a Quinn Technician You’ll have an opportunity to work with some of the most advanced and powerful equipment on earth • Total Rewards – Quinn offers competitive pay and benefits in addition to other rewards including profit sharing and training, • Career Advancement - Ongoing technical and managerial training means dealer technicians follow exciting and fulfilling career paths, • Advanced Training – Whether you’re a skilled or entry level technician, Quinn can provide you with education and training to further your career., • Pride in what you do – Your helping maintain and repair equipment that has an impact on your community Wages Starting wage for an Advanced Technician will depend on experience and education. $37.77 - $42.55 Responsibilities Essential duties and responsibilities of an Advanced Technician include the following. Other duties may be assigned. • Perform repairs with limited departmental supervision with higher level of responsibility for repair., • Possess tooling required by the service department., • Maintain good attendance and punctuality., • Disassemble and assemble machines/components. Recondition/repair as required., • Work overtime as required by workload and customer need., • Select proper tooling for any standard job and demonstrate proficiency with Cat diagnostic tools., • Perform diagnostics and organize appropriate repair procedures., • Successfully complete appropriate training sessions as required., • Demonstrate safe and proper application of hand, pneumatic and electric tools., • Perform tasks from verbal/written instructions and communicate effectively with supervisor and fellow employees., • Follow directions as given; follow company policies and procedures., • Build competencies and share skills with other technicians, retain acquired knowledge., • Treat customers and co-workers in a courteous and professional manner., • Be responsible and proactive for personal development and training requirements for growth., • Stay current with Cat product line. Utilize resources from Cat and Quinn Company., • Demonstrate and promote Quinn Company core values of Relationships, Integrity, Teamwork, Respect, Quality and Service., • Travel to other stores, customer sites and other dealer and Caterpillar facilities for work or training., • Work alternate shifts as required by workload. APPLY TODAY! Company DescriptionOur history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California. Now in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers. We are proud of the success we have built with the help of our customers, our employees and Caterpillar. history began in 1919 when Quinn Company supplied the Killifer Disc and Holt Tractor to the Fresno area farmers in their quest to develop the great San Joaquin Valley into the worlds richest agricultural region. In 1925, when Holt and Best Tractor Company merged to form Caterpillar Tractor Co. (now Caterpillar Inc.), Quinn became its dealer in the Fresno and Madera County area. Since then, we have expanded through acquisitions and grown along with the economy of California.\r\n\r\nNow in our fourth generation of family ownership, our operations span fifteen counties throughout central and southern California, including Arizona. Quinn now has 25 locations from Salinas to Foothill Ranch with more than 1600 employees to serve our customers.\r\n \r\nWe are proud of the success we have built with the help of our customers, our employees and Caterpillar.\r\n\r\n

Job Description Field Service Technician - WILL PROVIDE PAID TRAINING TO THE RIGHT INDIVIDUAL Hydrate HQ of SoCal is based out of Rancho Cucamonga, CA but services all of the greater SoCal area. With the rapid growth in the LA market we are seeking someone that lives in the greater Northern LA area. INTERVIEWING NOW -- Immediate need to fill position due to extreme growth Rancho Cucamonga based provider of Pure Drinking Water & Ice Systems to commercial business is seeking a FULL TIME - 8 to 5 - professional to install and service our pure water and dispensing ice systems. Install Technician will be responsible for installing water & ice systems in Offices, Distribution Centers, Medical Centers, and Manufacturing companies. We connect our systems to a water source and drain source using food grade flex tube...there is no hard copper involved. Requirements - • General handyman skills, • General plumbing skills, • Electrical knowledge, • Must be able to lift 95 lbs, • Must have a valid CA driver's license, • Must have experience and be comfortable operating scissor and boom lifts, • Clean driving record, • $20-$25/hr starting pay (starting pay will be based on experience), • Excellent training provided, • Cell phone and tablet are provided, • Company provided service vehicle, • Health insurance, • PTO, • NO WEEKENDS Required ***As part of our hiring process, we request that you take a behavioral assessment. 2 Questions, a couple minutes. Please use this link to take the assessment: Company DescriptionHydrate HQ is the fastest growing B to B drinking water company in the USA. We provide a patented and exclusive bottleless purifier to commercial business and industry that our customers LOVE! This “high end” purifier is an alternative to obsolete 5-gallon bottle water coolers, cheap filter machines and antiquated water fountains. Over 5,000 companies have been enjoying our service and our business has doubled in the last three years. Companies are seeking clean, safe and touchless alternatives due to COVID-19 and we have the industry’s top solution to this problem. Companies are NOW planning “back to work” improvements to their offices.Hydrate HQ is the fastest growing B to B drinking water company in the USA. We provide a patented and exclusive bottleless purifier to commercial business and industry that our customers LOVE! This “high end” purifier is an alternative to obsolete 5-gallon bottle water coolers, cheap filter machines and antiquated water fountains. Over 5,000 companies have been enjoying our service and our business has doubled in the last three years. Companies are seeking clean, safe and touchless alternatives due to COVID-19 and we have the industry’s top solution to this problem. Companies are NOW planning “back to work” improvements to their offices.

Job Description Shop Technician Who are we? A-Gas is an environmental services company whose purpose is to protect and enhance the environment by reducing global warming gases and preventing their release into the atmosphere. Rapid Recovery is the company's service division and the number-one provider of refrigerant recovery services for the HVAC, refrigeration, demolition, and marine industries. With industry-leading recovery, reclamation, and gas processing technologies, A-Gas continues to lead the industry in developing cutting-edge solutions designed to protect the environment. For more information on A-Gas, and our environmental journey, please go to . We are seeking a highly dependable Shop Technician who will be responsible for supporting the local team and customers with cylinder preparation and refrigerant gas consolidation. Why A-Gas? This position starts at $23+/hour, based on experience and skills. A-Gas offers generous benefits including medical, dental, vision, paid holidays, paid time off (PTO), a 401(k), company-paid short-term & long-term disability, life insurance, training initiatives, professional certifications, and a tuition reimbursement program. It is an exciting time to be a part of A-Gas, come grow with us! Key Responsibilities To perform this job successfully, an individual must be able to perform the following satisfactorily; other duties may be assigned. • The primary function of this position is to manage the cylinder fleet for shop location; including inbound and outbound cylinders, consolidation of refrigerant between cylinders, inventory management, and tracking of cylinders through our cylinder management software., • Implement and manage the Ready for pickup process that prepares the cylinders for pickup for return to the reclamation facility., • Receive cylinders from technicians, analyze the type of refrigerant, manage and perform consolidation process, • Operate pallet jack & liftgate, • Assist technicians with loading and off-loading the work trucks., • Manage parts inventory, • Keep a clean and organized workspace, • General maintenance on recovery equipment, • Handle various types of other technical duties relating to the work-flow process of refrigerants, • Ability to operate assigned equipment safely, • Follow all EPA regulations, • High School Diploma or GED required, • Must be at least 21, • Must have a valid Driver's License, • Must be able to lift, push, and pull cylinders that may weigh up to and more than 75 pounds, • Knowledge of the HVAC industry and experience handling Refrigerant/Recovery of HVAC gases are preferred but not necessary we will train you, • Mechanical ability, • Strong organizational skills, • Must have the ability to obtain an EPA 608 License within 14 days of employment Job Posted by ApplicantPro

Job Description We are looking for a MOBILE DIESEL MECHANIC to join our team! You will be responsible for repairing various vehicles systems. Responsibilities: • Identifying problems with diesel engines, brakes, steering, hydraulics, and other trailer systems using diagnostic tools, • Perform routine vehicle maintenance, • Use diagnostic tools to test vehicle components, • Previous experience as a mechanic, • Knowledge of shop equipment, • Strong mechanical aptitude and troubleshooting skills, • Deadline and detail-oriented, • Ability to thrive in a fast-paced environment

Job Description Responsibilities A Diesel Technician is responsible for providing service to our customers while maintaining exceptional customer service. This can include: cleaning, maintenance, visual inspection, and removal of parts and attachments. Installation with the help of proper manuals, report writing, disassembly, assembly, parts reuse evaluation, and reconditioning. Rush Truck Leasing opens the door to the world of opportunity. We are the premier commercial transportation solutions provider for businesses across North America. Our network of Idealease and PacLease partners allow us to offer our customers complete truck leasing and rental solutions across our network of dealerships. We offer a rewarding career as a leader in the transportation industry. Grow with us as we continue to expand our network of locations and services. Responsibilities: • Provide technical service to vehicles and equipment., • Perform general and detailed repair of all trucks, engines and components., • Overhaul gas or diesel engines., • Install injectors, pistons, liners, cam shafts, cylinder heads, rod and main bearings, oil pans, clutches, fan hubs, differentials, fifth wheels, brakes, change or recharge batteries, and replace transmissions and other parts., • Read job order, observe and listen to vehicle in operation to determine malfunction and plan work procedures., • Examine protective guards, loose bolts, and specified safety devices on trucks, and make adjustments as needed., • Lubricate moving parts and drive repaired vehicle to verify conformance to specifications., • Tag all warranty parts and returns to warranty clerk., • Attend training classes and keep abreast of factory technical bulletins., • We offer an exceptional Total Rewards package with outstanding healthcare benefits, a robust 401(k) plan with company matching, and an employee stock purchase program to help you build long-term financial security. Additionally, we provide performance-based incentives and opportunities for professional growth through ongoing training and development. All of this is within a culture that values and rewards excellence, a positive attitude, and integrity, ensuring you thrive personally and professionally. Basic Qualifications: • High school diploma or general education degree (GED) This job posting does not state or imply that these are the only duties to be performed by this employee. The employee will be required to follow any other instructions and to perform any other duties requested by their leader.

Job Description Solid State Devices, Inc. Company Overview High Density, High Performance, and High Reliability Products for Aerospace & Defense SSDI has been a pioneer in semiconductor manufacturing for over 50 years and has earned a reputation for setting the highest standards of reliability and performance. SSDI's high power and high voltage semiconductors and electronic systems meet the critical needs of many Aerospace and Defense applications. Test Technicians Company Overview High Density, High Performance, and High Reliability Products for Aerospace & Defense SSDI has been a pioneer in semiconductor manufacturing for over 50 years and has earned a reputation for setting the highest standards of reliability and performance. SSDI's high power and high voltage semiconductors and electronic systems meet the critical needs of many Aerospace and Defense applications. Job Summary: We are seeking experienced Test Technicians to join our dynamic team in the semiconductor industry. The successful candidate will have working knowledge of high frequency power conversion circuits and will be responsible for electronic testing and evaluation of semiconductors and power modules. In this role, you will provide technical support to other departments as required. Excellent interpersonal skills are necessary, must be able to work well with all levels of staff, customers and vendors in a professional and courteous manner. Supervisory experience is a plus! Responsibilities: • Perform testing of semiconductors and power modules (set-ups and verifications), • Provide technical support to other departments as required, • Assist in evaluating and testing new products to ensure compliance with the established electronic requirements, • Knowledge of high frequency power conversion circuits, • Knowledge of power semiconductor and discrete component characteristics and their applications, • Familiar with electronic measuring instruments This is not a guarantee of compensation or salary, as final offer amount may vary based on experience. Full-Time Schedule: Monday - Friday, 6:00am - 2:30pm or Monday - Friday, 3:00pm - 11:30pm (Positions available on Day Shift & 2nd Shift) Solid State Devices, Inc. proudly offers a comprehensive benefits package to all regular full-time employees, which includes: • Medical, Dental, and Vision Insurance, • Group Life Insurance / AD&D (Accidental Death & Dismemberment), • Voluntary Term Life Insurance / AD&D (Accidental Death & Dismemberment), • Paid Time Off (PTO), • 8 Paid Holidays Solid State Devices, Inc. is an Equal Opportunity Employer We consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected status. I understand that if I am extended an offer of employment, it will be conditional upon my successfully passing a post-offer, pre-employment Background and Drug Screen. Upon employment, I agree to the following: • Signing an Employee Creation Assignment & Non-Disclosure, • Abiding by all rules, regulations, and performance standards of Solid State Devices, Inc., • Application forms and materials are the property of Solid State Devices, Inc.

Job Description Empower your Future at the Nation’s Largest Independent Electrical Distributor! At U.S. Electrical Services, Inc. (USESI), we combine over 100 years of expertise, $150M+ in inventory, and the power of 2,000+ dedicated employees across 150 locations to deliver excellence every day. As a family of 14 regional businesses, we thrive on innovation and teamwork, empowering our people to shape the future of the electrical industry. Wiedenbach Brown, An affiliate of USESI, is looking for a motivated and enthusiastic Estimator to join our team! Job Type: Full-time; Remote Key Responsibilities: • Analyze and evaluate architectural and electrical drawings, • Produce accurate and timely lighting fixture and controls take-offs, • Identify discrepancies in specifications and drawings with design team, • Request pricing and lead times through manufacturers and sales reps, • Produce comprehensive and timely lighting proposals, • Upon project award, produce timely submittal packages, • Review submittal approvals and update quotes accordingly, • Review lighting changes within drawing bulletins/addendums and update quotes accordingly, • Collaborate with Sales team on all proposals, • A Bachelor’s Degree (preferred), • 2-5+ years of experience in Lighting Estimating, • Experience in reviewing construction plans, specifications, and other related construction documents, • Experience with Bluebeam software (preferred but not required), • Proficiency in MS Office Suite (Excel, Outlook, and Word), • High attention to detail, • Excellent quantitative and analytical math skills, • Strong verbal and written communications skills, • Strong time management and organizational skills At USESI, we believe that our benefits should make a difference—to you, your job, and the life you lead outside of work. We are dedicated to supporting our most valuable asset, our employees! Full-time employees are eligible for the following comprehensive benefit plan: • Medical, Dental, Vision, Rx coverage, • Paid Parental Leave, • TeleMedicine, • Matching 401(k), • Company-paid Life Insurance + (AD&D), • Supplemental Life Insurance, • Short and Long Term Disability, • Flexible Spending Accounts, • Employee Assistance Program (EAP), • Choice of Voluntary Benefits including identity theft It is the policy of USESI and its affiliates to consider applicants for all positions without regard to race, color, religion, creed, gender, gender identity, national origin, age, disability, marital or veteran status, or any other legally protected status. USESI is committed to providing reasonable accommodations to qualified individuals with disabilities. If you need an accommodation to apply for a job, please contact the Human Resources department.

Job DescriptionSalary: $185,000.00-$250,000.00 The Chief Financial Officer (CFO) plays a strategic leadership role in overseeing all financial aspects of LEED Electric, Inc. This executive is responsible for financial planning, risk management, budgeting, reporting, and ensuring the companys financial health and regulatory compliance. The CFO works closely with the CEO and executive team to shape the companys long-term financial strategy, optimize operational efficiency, and drive profitability across projects. The ideal candidate will have deep financial expertise within the construction industry, with a strong understanding of project accounting, job costing, cash flow management, WIP, and bonding requirements. They must also be skilled in building financial infrastructure and leading finance teams in a dynamic, project-based environment. RESPONSIBILITIES • Project-Centric Financial Planning and Analysis: Estimating, bidding, cash flow management, and project profitability analysis., • Strategic Planning and Investment Decisions: Capital budgeting, long-term financial sustainability and investment decisions., • Budgeting and Cost Control: Creating and managing budgets for construction projects, monitoring expenses, and implementing cost control measures to ensure projects remain within budget constraints., • Financial Reporting in Sage 300: Preparing accurate and timely financial reports, including income statements, balance sheets, and cash flow statements, to provide stakeholders with a clear picture of the company's financial performance., • Cash Flow Management: Managing cash flow to ensure sufficient liquidity for ongoing operations and project expenses, monitoring accounts receivable and payable, and optimizing cash flow through effective working capital management., • Construction Financial Risk Mitigation: Identifying and mitigating financial risks associated with construction projects, such as cost overruns, project delays, and changes in market conditions, and implementing strategies to minimize these risks., • Compliance and Regulatory Oversight: Ensuring compliance with financial regulations and industry standards, such as tax laws, accounting principles, and licensing requirements, and overseeing internal controls to prevent fraud and financial mismanagement., • Strategic Planning and Decision Support: Collaborating with senior management to develop strategic plans and make informed business decisions based on financial analysis and risk assessment, identifying opportunities for growth and profitability. Minimum Experience: 10+ years progressive experience within medium-to-large sized construction corporate environments, working in a CFO capacity. Staff supervision experience required. Construction industry experience required. Degree Required: Bachelors degree (B.S.) in finance, accounting or similar field. Masters Degree preferred. CPA a plus. Experience Required: Business • Strong analytical, risk assessment, strategic planning, organizational skills., • Proficiency in Sage 300, Procore, TimberScan, Microsoft Office 365 and KOJO. Advanced Microsoft Excel skills., • Proven experience in budgeting, forecasting, and financial analysis., • Past corporate controller experience., • M&A financial integration exposure., • Strategic mindset with a people-first approach and expert business acumen., • Experience in the industrial sector and project reporting (i.e WIP and rate of completion calculations, progress reports)., • Excellent leadership and people management skills, with the ability to inspire and motivate a high-performing team., • Critical thinking skills with a proven ability to exercise initiative, judgment, and discretion., • Proven ability to remain objective, discrete and exercise common sense at all times. Able to develop strong, trusting relationships within department and organization., • Excellent English verbal and written communication skills., • General work environment sitting for long periods, standing, walking, typing, carrying, pushing, bending. Work is primarily conducted indoors with varying environmental conditions such as fluorescent lighting and air conditioning. Occasional visits to outdoor locations., • Ability to perform extensive computer work and work extended hours when necessary., • Travel up to 10%., • We fully comply with the ADA and applicable state law, including considering reasonable accommodation measures that may enable qualified disabled applicants and employees to perform essential functions.

Job Description Location: Remote Reports to: Estimating Manager Position Summary: Voltaris Power LLC is a Private Equity backed, industry-leading company providing custom engineered solutions and electrical products such as low- and medium-voltage switchgear, dry-type power transformers (including power distribution unit transformers, medium voltage transformers etc.), unit substations and automatic transfer switches, catering to a diverse North American market. The company has over $80+ million in annual revenues and is actively pursuing various acquisition opportunities as part of its value creation plan to strategically scale and diversify product portfolio, customer base and end markets. We are looking for an experienced Electrical Systems/Switchgear Estimator (remote) to join the Pioneer Custom Electrical Products business unit, to generate pricing and proposal documents. This position plays an important role in shaping project success by ensuring accurate, timely, and competitive cost estimates across a diverse range of electrical infrastructure products including switchgear, e-houses, skid-mounted systems, and modular power distribution equipment. Key Responsibilities: • Switchgear Cost Estimating: Guide development of, review and approve complex estimates for large-scale or custom projects, ensuring completeness and alignment with company margin targets., • Proposal Development: Oversee the preparation of detailed cost estimates based on customer RFQs, technical specifications, electrical drawings, and project scopes. Analyze win/loss data to refine estimating strategy and increase project success rates., • Vendor Relationship Management: Interface with vendors and subcontractors to obtain accurate pricing for materials and outsourced services. Maintain updated information about vendor products and services., • Sales & Operations Support: Support sales and project management teams with technical and commercial input during project bid reviews and negotiations., • Cross-functional Collaboration: Work closely with Sales, Engineering, and Operations teams to tailor proposals, support pricing strategies to win business, and ensure seamless order handoff. Ensure estimates align with design capabilities, manufacturing processes, and delivery timelines., • Travel Requirements: This position requires 30% + travel, including occasional overnight stays. Travel may be local, regional, or national depending on project needs. Qualifications and Skills: • Education: Bachelor’s degree or equivalent, Electrical Engineering, Mechanical Engineering, Construction Management or equivalent experience a related field preferred., • Experience: 5+ years of experience in estimating with switchgear manufacturing, including experience with custom-built electrical products (e.g. medium voltage breakers, low voltage, automatic transfer switchgear, main-tie-main schemes, unit substation, skid mounted equipment, modular enclosures)., • Estimating: estimating experience in switchgear or related field is required., • Work Ethic: Excellent analytical, communication, task prioritization skills. Must have a heightened sense of urgency and be results oriented., • Technical Expertise: Strong understanding of electrical schematics, BOMs, construction documents, UL891, UL1558, utility requirements, solar application requirements, and general micro-grid technologies., • Problem-Solving: Ability to understand customer power protection and distribution requirements and develop appropriate value propositions., • Software Proficiency: CRM and ERP (NetSuite+) tools, Bluebeam, and MS Office Suite.

Job Description Established in 1919, RBC Bearings specializes in producing technical and regulated bearing products and components that demand advanced design, testing, and manufacturing capabilities. As a full manufacturing division, we manage the entire product lifecycle—from initial engineering and design through sales, supply chain management, and final production—ensuring quality and innovation at every stage. This comprehensive approach allows us to deliver highly technical solutions tailored to the diversified industrial, aerospace, and defense markets. RBC Bearings operates 56 facilities worldwide, including 37 manufacturing sites across ten countries. The company’s market capitalization is approximately $6.2 billion. With a skilled team integrated across all functions, we consistently deliver complex parts from concept through completion. Job Title/Location Machinist – Santa Fe Springs, CA Under general supervision, manages the CNC Lathe function of machining metal parts to print specifications. Performs required machine set-up and quality audits through the use of precision measuring instruments and special test equipment. Monitors/performs workflow in order to meet customer demands and production control requirements. The duties and responsibilities include, but are not limited to, the following: Run multiple lathes (2"-24") Setup Monitors the machining of metal parts to print specifications. Adjust programs Perform Offsets Performs self inspection plus the required quality audits through the use of precision measuring instruments and special test equipment. Performs production according to assigned priorities and communicates deviations to appropriate personnel. Collaborate with leads to monitor/augment departmental performance and makes adjustments to equipment and workload as needed. Ensures that all required materials are available prior to initiating production. Communicates open issues to alternate shifts. Provides mentoring as required to achieve increased skills for production and quality workmanship. Performs daily prior-to-use equipment maintenance tasks. Participates in daily 6S activities and adheres to all safety regulations. Participates in development of Job Safety Analysis. Must be willing to work overtime as needed. Essential Qualifications, Skills and Experience: High School Diploma, Equivalency, or GED. Demonstrated successful performance of manual adjustment of programming at machine interface. Ability to complete set-ups using 4th axis, with multiple offsets. 2 or more years’ experience in the operations of a CNC Lathe. Knowledge of tooling and precision set-ups with consistent quality results. Knowledge of precision measuring instruments. Knowledge of machinery speeds and feeds utilizing a variety of high strength materials. Ability to fluently read and follow instructions in English. Must read, understand, refer to and interpret Geometric, Dimensioning and Tolerancing (GD&T) dimensioning and third view projection blueprints. Ability to interpret prints and engineering drawings. Ability to perform machining on a variety of high strength materials (Inconel, A286, Titanium, Stainless, Chrome, 300M, 15-5, etc). Beneficial Qualifications, Skills and Experience: Experience in an Aerospace manufacturing environment preferred. Bilingual - English and Spanish MIN/MAX: $22 to $24 **Please note that the salary range information is only applicable to California. This range is the company's good faith and reasonable estimate of the compensation for this role based on the position's responsibilities, qualifications, experience, and other relevant factors. Actual compensation may vary depending on the selected candidate's specific experience, education, skills, and other relevant factors. Equal Opportunity Employer RBC Lubron Bearing Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident [“green card” holders] or have refugee or asylee status.

Job Description We are seeking passionate, talented, and experienced Estheticians and Eyelash Technicians to join our team. The ideal candidate is a highly skilled professional with a strong understanding of current trends and techniques. This role is perfect for an independent & reliable professional, dedicated to growing their clientele while having the flexibility to schedule their own work hours. Having your own clients is a plus in negotiating your commission. Must be a Licensed Cosmetologist or Esthetician (per California requirements). Eyelash technicians must be Certified in Lash Extensions and at least 1 year of hands-on lash application experience. Company DescriptionThe OC Beauty Spot is a beautiful salon space in a high-traffic area. We have a supportive team culture and give you the freedom and flexibility to schedule your own work hours. We offer multiple beauty services, attracting a wide client base and increasing the possibility of additional exposure and revenue for our professionals. Customers love being able to get multiple treatments done in one place.The OC Beauty Spot is a beautiful salon space in a high-traffic area. We have a supportive team culture and give you the freedom and flexibility to schedule your own work hours. We offer multiple beauty services, attracting a wide client base and increasing the possibility of additional exposure and revenue for our professionals. Customers love being able to get multiple treatments done in one place.

Job Description ABOUT THE COMPANY Founded in 1888, Lee Kum Kee, a Hong Kong-based global food company, specializes in creating condiments and sauces that promote Chinese cuisine worldwide. With more than 200 products to choose from, Lee Kum Kee takes the mystery out of cooking authentic and delicious Asian foods in the comfort of your kitchen. Lee Kum Kee is committed to providing authentic and innovative condiments and sauces featuring the highest quality ingredients. Armed with a unique management culture, stringent quality control, superb and innovative products, coupled with the century-long brand reputation, Lee Kum Kee has achieved unanimous recognition and won numerous prestigious awards. BENEFITS • Medical, dental, life insurance covered by the company, • 401(k) retirement plan with company match, • Two (2) weeks vacations, • Ten (10) paid holidays POSITION SUMMARY This position assists as needed in the lab. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Perform Chemical and physical analysis for samples (product, ingredients, environmental, sanitation chemical) as soon as sample arrived; calculated and determine amount of ingredients needed to adjust semi-finished good sample reading back to specified range., • Discuss results and findings with those in charge of the products, and recommend any required corrective actions as needed., • Conduct microbiological analysis for samples provided., • Verify data measured against specification and determine acceptability., • Enter data into system. Conduct trend analysis. Report any trend to supervisor in timely manner., • Maintain and calibrate lab equipment., • Maintain working area clean (clean up area, equipment, tools, etc. after analysis is ended. Sample disposal)., • Work as team with other lab technician and assist each other to provide data in timely manner., • Cover with other lab technician in their absence., • Help maintaining inventory of lab supplies., • Assist QA/QC management improve the microbiological, chemical and physical quality of LKK products., • Assist QA/QC management to conduct special projects regarding microbiological, chemical and physical issues., • Maintain & follow Good Laboratory Practice at all times., • Perform all other special assignments as requested. COMPETENCIES • Action Oriented, • Customer Focus, • Time Management SUPERVISORY RESPONSIBILITIES This job does not have supervisory responsibilities. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each major responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the major responsibilities. • EDUCATION, SKILLS and EXPERIENCES, • A college degree is preferred for this position., • Experience in a food company lab is useful; and experience in administrative support to a technical department or organization is preferred., • Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form., • Ability to read and comprehend equipment manuals and electrical diagrams for set-up control loops., • Candidate must be able to deal with problems involving several concrete variables in standardized situations., • LANGUAGE SKILLS, • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals., • Ability to write reports and correspondence and prepare and deliver clear and smooth presentation., • Ability to speak effectively before groups of customers or and employees of organization., • Convey information clearly and effectively through both formal and informal documents., • MATHEMATICAL SKILLS, • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ideal candidate must compute rates, ratios, and percentages and draw and interpret bar graphs., • While performing the duties of this job, the employee is regularly required to stand; use hands or fingers to handle or feel; reach with hands and arms; walk, climb or balance; stoop, kneel, crouch, or crawl; talk or hear; and taste or smell., • On rare occasions, the employee may need to lift and/or move up to 50 pounds., • Specific vision ability is required, including close and distance vision, color vision, peripheral vision, depth perception, and ability to adjust and stay focus., • Perform frequent sensory evaluation such as tasting of the food products., • While performing the duties of this job, the employee is regularly exposed to fumes or airborne particles; toxic or caustic chemicals. It is Lee Kum Kee’s policy to seek and employ the most qualified persons in all jobs in a manner which will ensure equal employment opportunity as well as administer personnel actions in a manner as to not discriminate against any person on the basis of race, color, religion, national origin, age, sex, sexual orientation, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job Description Description Lab Technician will be responsible for analytical testing that will be used in the development of new product specifications. In this position you will perform quality testing, maintenance, and calibrations of the instruments in addition to assisting in the development of new test methods as needed. Monitor product quality to ensure compliance to standards and specifications. Set up and conduct chemical experiments, tests, and analyses using techniques such as chromatography, spectroscopy, physical and chemical separation techniques, and microscopy. Conduct chemical and physical laboratory tests to assist scientists in making qualitative and quantitative analyses of solids, liquids, and gaseous materials.• Compile and interpret results of tests and analyses. Provide technical support and assistance to chemists and engineers. Prepare chemical solutions for products and processes following standardized formulas, or create experimental formulas. Maintain, clean, and sterilize laboratory instruments and equipment. Write technical reports or prepare graphs and charts to document experimental results. Order and inventory materials to maintain supplies. Skills titration, chemistry, viscosity, Ph testing, laboratory, Hplc, Chemical, Data entry, Sample, Analysis, Diagnosis, Qc testing, Analytical chemistry, Sop, Qc Top Skills Details titration,chemistry,viscosity,Ph testing Additional Skills & Qualifications Bachelors Degree in a Scientific Discipline- Chemistry, Biochemistry, Biology 6 Months of Laboratory Experience (can be from college classes or field experience) Experience Level Entry Level Pay and Benefits The pay range for this position is $20.00 - $22.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in CITY OF INDUSTRY,CA. Application Deadline This position is anticipated to close on Sep 26, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionCompany Description Avery Dennison Corporation (NYSE: AVY) is a global materials science and digital identification solutions company. We are Making Possible™ products and solutions that help advance the industries we serve, providing branding and information solutions that optimize labor and supply chain efficiency, reduce waste, advance sustainability, circularity and transparency, and better connect brands and consumers. We design and develop labeling and functional materials, radio frequency identification (RFID) inlays and tags, software applications that connect the physical and digital, and offerings that enhance branded packaging and carry or display information that improves the customer experience. Serving industries worldwide — including home and personal care, apparel, general retail, e-commerce, logistics, food and grocery, pharmaceuticals and automotive — we employ approximately 35,000 employees in more than 50 countries. Our reported sales in 2024 were $8.8 billion. Learn more at . At Avery Dennison, some of the great benefits we provide are: • Health & Wellness benefits starting on day 1 of employment, • Paid parental leave, • 401K eligibility, • Tuition reimbursement, • Employee Assistance Program eligibility / Health Advocate, • Paid vacation and Paid holidaysJob Description Avery Dennison is seeking a Mechanical OR Controls Design Engineer to join our Engineering Technology group in Azusa, CA. The Engineering Technology group is responsible for developing, optimizing, and implementing proprietary process technologies and equipment for our manufacturing plants worldwide. Technologies can include; manufacturing RFID devices, precision coating, extrusion, thermal embossing, drying/curing, lamination and other web-based processes such as printing and label converting. This position will lead and/or support project execution through all phases, from concept design, to scale-up, to commercialization and requires close collaboration with vendors and Avery Dennison plants globally. Responsibilities * Design and analyze complex mechanical and/or controls systems, with a focus on tight tolerance machine design and high-speed manufacturing systems. * Support and lead global projects that require mechanical design, controls engineering, and process expertise. * Inspect, install, and commission proprietary equipment and automation systems in manufacturing facilities worldwide. * Coordinate and manage resources, including outside vendors and Avery Dennison divisional personnel, to ensure that the equipment, processes, and automation solutions provided meet all requirements and specifications. * Design and test necessary prototypes/experiments in support of design and project objectives, including advanced automation concepts. * Develop and maintain comprehensive technical documentation, including control system specifications, schematics, and programming standards. * Potentially lead and mentor junior engineers, providing technical guidance and project oversight. Qualifications * 5+ years of experience in EITHER Industrial Machinery Design (actuators, bearings, sensors, precision, etc) OR Controls/Automation Design * Capable of taking complex projects from concept design through commercialization. * Demonstrated proficiency in Computer Aided Design (CAD) tools OR Controls/Automation software including AllenBradley/Siemens PLC, motion control systems, etc.) * Well developed drafting skills; familiar with GD&T, ASME Y14.5 Standards (for mechanical design candidates). * Knowledge and experience in Finite Element Modeling for structural, heat transfer, and fluid flow analyzes a plus (for mechanical design candidates). * Knowledge and experience with industrial control systems, including PLCs, HMIs, VFDs, robotics, and sensors (for controls/automation design candidates). * Ability to work hands-on with equipment, machines, automation systems, and inspection devices. * Proven analytical mindset for overcoming complex engineering challenges and problems. * Must be willing and able to travel within the US and internationally. * Excellent organizational and planning skills; ability to handle multiple projects/tasks simultaneously and manage project teams effectively Additional Information The salary range for this position is $100k - $130k / year. The hiring base salary range above represents what Avery Dennison reasonably expects to pay for this position as of the date of this posting. Actual salaries will vary within the range, and in some circumstances may be above or below the range, based on various factors including but not limited to a candidate’s relevant skills, experience, education and training, and location, as well as the job scope and complexity, responsibilities, and regular and/or necessary travel required for the position, which may change depending on the candidate pool. Avery Dennison reserves the right to modify this information at any time, subject to applicable law. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact (440) 534-6000 or to discuss reasonable accommodations.

Job Description Position Summary: The Area Estimator performs material takeoffs, prepares estimates and proposals, and otherwise assists branches within the Area in their efforts to secure profitable work. In addition to individual performance, this position is responsible for mentoring and training other Estimators and Account Managers within the Area. Essential Duties and Responsibilities: • Provide excellent customer service & support for assigned branch offices. Develop and maintain relationships with branch teams (Branch Managers and Account Managers) through regular contact, prompt and quality responses, and professionalism., • Serve as the estimating subject matter expert for the Area, providing training and mentoring, • Work with Branch Managers and Area Presidents to prioritize and coordinate estimating efforts between branches, • Maintain customer and bid databases for assigned customers in Salesforce, • Interpret specifications and perform material take-offs from construction drawings, • Participate in pre-award meetings to clarify scope, specifications, and job site conditions, • Summarize the takeoff and note job conditions that may affect labor productivity, • Solicit material and subcontract pricing from vendors to incorporate into the estimate, • Request bonds and bond pricing from the corporate office when needed, • Prepare cost estimates utilizing MIKE estimating software, field take-offs, or other software company may choose to utilize., • Prepare material and application submittal when required by contract conditions, or when necessary to clear up ambiguous specifications or when otherwise desirable, • Prepare a project schedule when required by a specification or company policy, • Upon award of the subcontract, prepare the Material Requirements and Foreman’s Work Order, attend preconstruction meetings, and otherwise support the hand-off to the construction team, • Assist the Construction Manager and Account Manager with job control setup and cost codes, • Track & understand labor productivity, material costs, direct and indirect costs, taxes, and margin standards to ensure accurate estimates, • Participate in the company's Continuous Improvement Process, • Exhibit a spirit of cooperation and teamwork with all members of the organization, • Ability to prioritize tasks and work under time constraints to meet deadlines, • Self-motivated with the ability to work independently, • Strong math aptitude, in algebra and geometry skills, • Advanced Microsoft Excel skills and experience, with good attention to detail, • Proficiency with estimating software and other relevant software tools, • Ability to interpret drawings, architectural/mechanical plans, and flow diagrams, • Familiarity with construction project management practices, • Ability to learn and follow applicable policies and procedures, • High school diploma or equivalent The duties and responsibilities described above are not a comprehensive list. Additional tasks may be assigned to the employee from time to time; the scope of the job may change as necessitated by business demands.

Job DescriptionWJ Landscape Maintenance, Inc., is a professional landscape firm that builds and maintains the highest quality and luxury residential landscapes in the Greater Los Angeles and Santa Barbara County areas. Our teams are passionate about their work, dedicated to the landscape profession, and most importantly, to our clients. As we continue to grow, we are looking for passionate and experienced professionals to help drive our business growth and manage our teams for greater success. We are seeking a Landscape Maintenance Account Manager to manage the company’s maintenance business operations, ensure we are positioned for continued growth, and effectively maintain our exacting standards. The Account Manager must understand maintenance needs, crew needs, scheduling, routes, costs, and overall contract profitability. In addition, the candidate should have experience in developing an organization’s infrastructure, workflow, internal communications, and critical business processes. This individual must have hands-on field experience, understand client expectations, have a clear ability to build relationships, anticipate maintenance and enhancement needs, and have a high standard for quality work. The successful candidate will be an innovative and self-motivated leader with a high degree of maturity, personal integrity, and strong interpersonal skills. Position OverviewAs a senior member of the Administrative Team reporting to the President, the Account Manager will work closely with the Production Manager, Maintenance Coordinator, and crews to supervise critical daily operations. This position will hold a crucial role in our team as it will serve as the main conduit of communication between the field, office, and executive staff. The ideal candidate is a highly skilled professional who can coordinate all maintenance business operations while at the same time supporting the growth of a diverse and fast-growing landscape maintenance company. Key Responsibilities • Client Relationship Management: Act as the primary point of contact for clients, building strong relationships to ensure satisfaction and retention. Develop a thorough understanding of client preferences and property-specific requirements., • Enhancement Sales, Estimating, & Management: Using Aspire software, identify, estimate, and oversee the execution of enhancement opportunities to improve client properties, exceed expectations, and increase profitability., • Billing Management: Manage/review Aspire work tickets and execute client billing with accuracy. Collaborate with administrative and production teams to resolve work ticket & billing issues promptly and maintain seamless operations., • Renewals & Scheduling: Using Aspire software, manage contract renewals and daily maintenance schedules for crews, while balancing client needs, crew availability, issues, and geographic proximity., • Operational Oversight & Performance Analysis: Oversee all maintenance operations, including fieldwork, office administration, and interdepartmental coordination. Analyze Aspire reports to monitor crew efficiency, profitability, and job progress. Use data insights to identify issues, prioritize needs, and implement effective solutions., • Aspire Mastery & Optimization: Master Aspire software to support business functions across all departments, with a focus on maintenance services and crew management. Proactively utilize Aspire to streamline processes and improve team efficiency., • Quality Assurance: Manage the performance of Site Audits to ensure all work aligns with WJ standards, identify enhancement opportunities, and meet client expectations., • Team Leadership: Lead maintenance crews by setting clear expectations and fostering a positive work environment. Conduct team meetings and support crew performance., • Employee Development: Oversee onboarding, performance reviews, and ongoing training programs, emphasizing safety, horticultural practices, and adherence to WJ standards. Mentor and coach team members to encourage growth and accountability., • Division Management: Meet maintenance division goals and benchmarks set by senior leadership. Address challenges by identifying issues and prioritizing improvements in field operations, client relations, and administrative procedures. Mentor the maintenance team to enhance overall performance and increase profitability. Skills and Requirements, • A degree in horticulture or a minimum of ten-years (10) industry experience in lieu of a degree, • A minimum of five-years (5) of experience in irrigation design, maintenance, and repair, • A minimum of two years of administrative experience, • Experience with landscape management software, such as Aspire, • Fluent in English and proficient in Spanish, • Demonstrate excellent professional communications skills, with a clear ability to build relationships, • Computer proficiency - Mac/Windows, Microsoft Word, Excel, PowerPoint, Outlook, and the ability to master other software, • A valid California Driver’s License Compensation: Based on experience, paid weekly – SalariedBenefits: Paid vacation, paid holidays, IRA, Medical, Dental and Vision insurance

Job DescriptionCompany Description About Sika With more than 100 years of experience, Sika is a worldwide innovation and sustainability leader in the development and production of systems and products for commercial and residential construction, as well as the transportation, marine, automotive, and renewable energy manufacturing industries. Sika has subsidiaries in 102 countries around the world and, in over 400 factories, produces innovative technologies for customers worldwide. In doing so, it plays a crucial role in the transformation of the construction and transportation sector toward greater environmental compatibility. With more than 34,000 employees, the company generated sales of CHF 11.76 billion in 2024. Job Description Pay Rate $21.00 hr. We are seeking a skilled Color Lab Technician to join our Santa Fe Springs Color Lab Team. The successful candidate will be responsible for the following: • Process color requests efficiently and accurately to meet production demands., • Maintain and operate laboratory equipment, including the wastewater drainage system, dust collector, and SBMF oven, ensuring optimal performance and longevity., • Adhere strictly to company safety policies and procedures to maintain a secure work environment., • Maintain clear and consistent communication with supervisors regarding project status, challenges, and results., • Manage workspace organization effectively while handling UPS deliveries and other logistical tasks., • Demonstrate flexibility and adaptability in addressing additional tasks as assigned by the supervisor. Qualifications • Requires a minimum of 3 to 5 years directly related experience color matching/mixing, ideally with samples and/or stucco and/or grouts materials., • Ideal candidate would be experienced in all techniques of stucco application. Must have full perception of the color spectrum, and the ability to create formulas in a timely manner using available materials., • Requires basic computer proficiency for purposes of accessing formula database., • Must have good Math knowledge, including the use of fractions and decimal conversions., • Must have strong attention to detail and be multi-task oriented. Additional Information Perks & Benefits • 401k with Generous Company Match, • Bonuses, • Medical, Dental, and Vision Benefits, • Paid Parental Leave, • Life Insurance, • Disability Insurance, • Paid time off, paid holidays, • Floating holidays + Paid Volunteer Time, • Wellness/Fitness Reimbursements, • Education Assistance, • Professional Development Opportunities, • Employee Referral Program & More! Sika fosters a culture of entrepreneurship, empowering each individual to make decisions, learn from experiences, and shape their own career path. The safety and well-being of employees are top priorities at Sika, with a strong commitment to open communication and maintaining a safe workplace. In addition, Sika actively contributes to the community and promotes sustainability by giving back, minimizing environmental impact, and embracing social responsibility. Sika Corporation is committed to a work environment that supports, inspires, and respects all individuals that apply. As an equal opportunity employer Sika will consider all qualified applicants without discrimination on the basis of race, color, religion, sex, pregnancy, sexual orientation, gender identity, age, disability, national or ethnic origin, or other protected characteristics.

Job Description Title: LA Water Laboratory Technician Reports to: Water Treatment Department Assistant Manager Status: Full-time (on-site daily at the lab) Working Hour Range: 4am-1pm during training period; After 90 days, flexible 8 hours/day between 4am – 5pm Working Location: Irwindale, California Miura is a global company that produces the most efficient boiler system solutions in the world. Miura aims to be the best partner for energy, water, and environment with our Techno-Service revolution. Miura proudly builds its boilers in Rockmart, GA. PURPOSE OF ROLE: The Water Laboratory Technician is responsible for providing support for Miura’s Sales, Maintenance, and Support teams by analyzing water samples and supporting the water sampling-related activities within the company; for maintaining the lab’s operation and accuracy with analysis of water samples. ESSENTIAL FUNCTIONS: • Water Sample Analysis, • Perform water analysis on all water samples that are received by the lab for testing., • Understand and utilize platforms to transfer submitted analysis request data to the analysis document., • Conduct tests on water samples following Miura’s water analysis procedures., • Maintain a minimized backlog of water samples and minimize the duration of time that the water samples are on the shelf., • The daily sample count analyzed will vary, but it is expected that the employee is capable of adjusting their analysis count as necessary to manage the backlog of samples., • A range of 50 to 80 samples within a day is an expected range of capability after employment of 6 months., • Follow the procedure for water analysis result review and the manage retest turnaround time., • Upload the water analysis data into the Miura database., • Quality and Accuracy Checks and Reporting, • Perform routine accuracy checks on lab equipment and procedures., • Perform and record monthly calibrations, adjusting and correcting as necessary to fall within the necessary range of operation., • Perform necessary weekly and daily calibrations to ensure proper operation of equipment and proper analysis results., • Receive a passing evaluation during the biannual cross checks with Japan., • Create routine reports on the operations and status of the lab., • Generate reports on the analysis operations of the lab., • Report on the calibration and accuracy checks., • Able to provide Chemical Hygiene Plan (CHP) Report to supervisor and general affairs monthly., • Lab Management & Maintenance, • Maintain the laboratory’s cleanliness, organization, equipment maintenance, and inventory of reagents and consumable materials., • Routinely clean the tools, glassware, and lab environment., • Keep with 5S standards for organization and cleanliness to promote a safe and orderly work environment., • Maintain the function of the lab equipment through routine maintenance and situational activities., • Order lab chemicals and supplies as needed to maintain a proper inventory and minimize down-time., • Perform monthly inventory counting and submission at the end of the month., • Manage and dispose of waste properly and in accordance with regulations, policies, and procedures., • Able to understand and follow the procedures for handling hazardous waste., • Relocate solid and liquid waste to the appropriate locations and document the disposal as required, minimizing the risk of an accident., • Safety, • Operate while following proper safety practices to keep yourself and others safe in the lab and factory., • Wear proper PPE (Personal Protection Equipment) in the appropriate locations., • Safely handling of all reagents., • Safely and quickly clean up chemical spills in accordance with their SDS and lab safety policies and procedures., • Complete company-wide Compliance Training on a yearly basis., • Identify unsafe conditions and report to a supervisor and General Affairs., • Reagent Mixing, • Blend reagents for routine water analysis., • Accurately follow the procedures for reagent mixing., • Appropriately measure out raw material using the appropriate tools and equipment., • Maintain a proper inventory of all raw materials., • Water Sample & Bottle Management, • Perform all the functions that are associated to maintaining a low backlog of samples and make sure that Miura branches and Representatives have an adequate number of bottles for water sampling activities., • Send out empty water sample bottles to Miura personnel and Representatives to support their sampling activities., • Supply of water bottles should be performed in a timely fashion., • An inventory of bottles within the lab should be managed to allow for quick response to requests for bottles., • Cooperate with multiple departments to ensure that the shipments occur properly., • Follow the proper procedure for tracking of bottles and operational analysis., • Receive water samples in a routine fashion., • Shipments should be checked regularly to make sure they are received in a proper and timely manner., • Samples received should be tracked in the system on the day of receipt for proper data management and tracking., • Samples awaiting analysis should be stored and managed appropriately to minimize accidents and mistakes with identification., • Analyze water samples (reference the section above)., • Clean water bottles regularly to minimize clutter and manage the inventory of cleaned bottles for supply., • Samples should be routinely disposed of according to established lab procedures., • Water bottles should be cleaned and prepared for reuse., • Follow proper procedures for storage and tracking of water bottles for operation analysis and inventory management., • Determine when the water bottles should be replaced and follow the procedure for replacing them with new bottles., • Prepare new bottles for use based on proper inventory management., • Lab Improvements, • Routinely perform assessments of all procedures, processes and equipment to determine if the lab is operating effectively and efficiently., • Regular review of the lab to consider improvements to processes, procedures, and equipment., • Provide recommendations to the supervisor for review and consideration., • Improve knowledge and documentation of procedures and policies pertaining to the lab, including training material. Position Minimum Requirements (knowledge, skills and abilities required to perform satisfactorily in the position): • Must understand and be able to apply the principles of the MIURA “MOTTO,” “MISSION and VISION,” “MIURA WAY” and “CSLP – Complete Solutions & Lifecycle Partnerships” to their everyday work activities where applicable, and always put safety first., • Proficient in Microsoft Word and Excel., • Ability to multi-task and manage multiple projects., • Ability to work in a laboratory environment which is separated from other employees., • Ability to properly and safely handle and dispose of hazardous waste., • Ability to perform tasks repetitively and follow procedure thoroughly. Job Qualifications: • High School Diploma or GED., • Experience with laboratory environment is preferred but not required., • Experience with laboratory equipment calibration is preferred but not required., • Knowledge of chemicals and their dangers is preferred but not required. PHYSICAL DEMANDS: • Position requires walking and standing over 2/3 of time., • Position requires sitting working at a keyboard under 1/3 of time., • Position requires talking 1/3 to 2/3 of time., • Position requires lifting up to 20 lbs. 1/3 to 2/3 of time., • Position requires lifting up to 50 lbs. under 1/3 of time., • Position requires climbing stairs under 1/3 of time., • Position requires pushing under 1/3 of time., • Position requires hearing over 2/3 of time., • Position requires keyboarding 1/3 to 2/3 of time., • Position requires using close and color vision over 2/3 of time., • Position requires using distance vision 1/3 to 2/3 of time., • Position requires reading and interpreting instructions over 2/3 of time., • Position requires regular and reliable attendance.

Job Description Ford-Trained / Experienced Mechanic – Fleet & Customer Vehicles Santa Fe Springs, CA | ⏰ Monday–Friday Day Shift | Competitive Pay + Benefits We’re a growing truck repair facility in Santa Fe Springs, CA, looking for a Ford-trained or Ford-experienced mechanic to join our team. This role focuses on Ford Powerstroke vehicles, primarily service trucks, with the opportunity to work on a variety of other fleet and customer vehicles. If you’re tired of flat rate, tired of selling unnecessary work, and want to be part of a team that values quality repairs and keeping a fleet running at peak efficiency, this is the job for you. What You’ll Do: * Perform maintenance and repairs on our in-house fleet of 15+ Ford service trucks. * Handle all aspects of truck service, including PTO systems, compressors, and standard maintenance. * Diagnose and repair Powerstroke-specific systems. * When not working on fleet vehicles, perform maintenance and repairs on customer trucks and vehicles. * Work alongside a skilled group of techs and a supportive, reasonable Service Manager. What We’re Looking For: * Ford training or significant experience working on Ford Powerstroke vehicles. * Strong diagnostic and repair skills across multiple truck systems. * Ability to work independently and as part of a team. * Well-rounded skill set, including PTO systems and service truck-specific equipment. Why You’ll Love It Here: * Monday–Friday day shift – no nights or weekends. * Competitive pay + benefits. * Steady work – no upselling or chasing hours. * Work for a company that values teamwork, trust, and doing the job right. * Career stability in a growing business. If you want to put your Ford expertise to work in a role where your skills keep a fleet running at its best—without the pressure of flat rate—apply today and join our team!

Job Description SUMMARY The Sr. Electronics Technician will be working in the Quality Service and Support Department, a manufacturing environment that is fast-paced and challenging. The individual in this position must have a good eye for detail. A flexible schedule is required as periodic demands require overtime, (including some weekends). Amada Weld Tech produces manufacturing equipment which includes welders, solder reflow systems, laser markers, and complete automated welding systems. ESSENTIAL DUTIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Employees must spend over 50% of their time on these duties. · In-process and final inspection of electronic, optical, electromechanical, and mechanical assemblies. · Calibration of electronic, optical, and mechanical assemblies. · Troubleshooting to the component level. · Repair of electronic, optical, and mechanical assemblies. · Soldering/de-soldering of through-hole and SMT components at a high level of quality. · Customer support via phone and E-mail. · Periodic travel to customer’s facilities to perform repairs/do training. Must be able to travel internationally. · Responsible for new product testing. This will include software/hardware testing, documentation review and report writing. · Other projects and tasks assigned by the Company from time to time. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. EDUCATION & EXPERIENCE Must have 5-7 years of related experience and at least a BSET or AS Degree in electronics. · Must be able to work overtime. · Proficiency with electronic test equipment including oscilloscopes, digital multi-meters, signal generators and counters. · Must be proficient in the safe handling of high-power/high-current electronics. Some of our equipment operates on 650 Volts with primary currents as high as 4000 Amps. · Must possess a strong working knowledge of analog/digital electronics and testing and troubleshooting of electro-mechanical systems. · A can-do attitude, excellent analytical skills including diligence and follow through, and the ability to research and solve problems. · Excellent communication skills, written and verbal.

Job Description Pay: • Installing, • Assembling, • Construction experience preferred, • Carpentry experience preferred, • Tape measure, • Blueprints, • Power tools, • Hand tools If interested and you meet the qualifications, apply here directly or text Mike Dominguez at 562 566 4712 Pay and Benefits The pay range for this position is $19.00 - $20.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in South El Monte,CA. Application Deadline This position is anticipated to close on Sep 17, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description MINIMUM QUALIFICATIONS: • 1-2 years of crane service technician or relevant trade experience (electrical, mechanical, etc)., • Must have strong verbal, written and interpersonal communication skills., • Demonstrate the ability to learn mechanical, electrical, and industrial skills., • Candidate must be willing to travel and work in production environments, with some overnight travel possible., • Ability to operate company phone and computer., • Ability to complete electronic forms in a timely manner., • Ability to work extended hours, and on holidays, as required., • PHYSICAL REQUIREMENTS:, • Ability to stand/walk 95% of the work day., • Lift /Carry up to 40-50 pounds unassisted., • Squat, twist, reach, climb, and bend frequently., • Ability to push/pull material with equipment assistance., • Possess hand/eye coordination and bilateral dexterity (gross and fine)., • Possess depth perception and peripheral vision., • Subject to working frequently at considerable heights., • Competitive pay, • Medical / Dental / Vision Insurance, • 401k plan with match, • Mandatory OT Saturdays, DT Sundays, OT after 8 on Weekdays, • Short and long-term disability insurance available, • Paid holidays, • PTO Program, • Boot StipendCompany DescriptionA high-growth overhead crane company, CraneTech is focused on becoming the best crane service provider in the nation measured by customer and employee satisfaction. The company is well-established, well-funded, and well-positioned to support sustained expansion while continuously delivering exceptional products and service. We are industry leaders with a unique culture that differentiates us from our competitors and other field service businesses. A values-driven meritocracy, we provide our team members with opportunities for personal and professional growth.A high-growth overhead crane company, CraneTech is focused on becoming the best crane service provider in the nation measured by customer and employee satisfaction. The company is well-established, well-funded, and well-positioned to support sustained expansion while continuously delivering exceptional products and service. We are industry leaders with a unique culture that differentiates us from our competitors and other field service businesses. A values-driven meritocracy, we provide our team members with opportunities for personal and professional growth.