Trabajos process development engineer en Hempstead, New YorkCrear alertas

Work Location: Baldwin County, New York Summary: The QMS Supervisor is responsible for overseeing the development, implementation, and ongoing maintenance of the Quality Management System (QMS) to ensure compliance with relevant industry standards and regulations. This role focuses on driving continuous improvement, managing audits, leading CAPA processes, and providing training to promote a culture of quality throughout the organization. Responsibilities: • Oversee the structure and maintenance of the QMS, ensuring all documentation and procedures comply with regulatory standards and organizational objectives., • Lead and coordinate internal and external audits, manage audit responses, and verify the effectiveness of corrective actions., • Conduct root cause analysis for non-conformances and customer complaints, implementing effective CAPA solutions., • Drive continuous improvement initiatives using lean methodologies, statistical process control, and data analysis to optimize efficiency., • Manage electronic QMS platforms and ensure document control processes are accurate, current, and compliant., • Align all quality programs and initiatives across the organization to maintain consistent standards., • Monitor compliance with customer and regulatory quality requirements, ensuring standards are met or exceeded., • Develop and report key QMS performance metrics to senior management, providing actionable insights for decision-making. Qualifications: • Minimum 5 years of experience in a leadership role within Quality Management Systems or Quality Assurance, preferably in the medical device industry., • Bachelor’s degree in Engineering, Life Sciences, Biomedical Engineering, Quality Management, or a related field; Master’s degree may substitute for 1 year of experience., • Strong knowledge of ISO 9001, ISO 13485, or AS9100:2016 standards., • Experience with root cause analysis tools, FMEA, SPC, and electronic QMS software., • Certified Internal Auditor (ISO 9001/13485) preferred., • Lean Six Sigma certification (Black Belt or Green Belt) preferred., • Excellent written and verbal communication skills for interfacing with customers and regulators., • Proven ability to lead and influence cross-functional teams and mentor others., • Strong analytical and problem-solving skills, with the ability to implement sustainable solutions., • High attention to detail in document review and compliance assessment., • Ability to work independently and collaboratively in a team environment., • ASQ Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE) preferred., • Experience in highly regulated industries such as medical device or pharmaceutical sectors preferred., • Experience with document control administration preferred. Published Category: Quality & Validation

Web Application Development Manager Join our Aon Affinity group, which is a leading provider of specialty insurance solutions and programs offered to a variety of professional, small & medium enterprise and consumer markets. Through sponsor partnerships with 300 plus corporate and association clients, we add value to their member, customer and affiliate relationships! This is a hybrid role allowing you to work 1-2 days in the office: commuting to our Garden City, NY office and 3 days at home. Aon is in the business of better decisions At Aon, we shape decisions for the better to protect and enrich the lives of people around the world. As an organization, we are united through trust as one inclusive, diverse team, and we are passionate about helping our colleagues and clients succeed. What the day will look like • Day to day management of an offshore development team, • Collaborate with IT teams on the integration of web applications with other business applications, • Design, Build, and maintenance of web sites and API integrations, • Ensure technology infrastructure stability and hygiene and own production assurance, • Ensure code has met or exceeded performance, stability, resiliency and security/cyber needs., • Work closely with IT teams and business partners to assist in confirming application requirements, • Develop an understanding of the business and products to help architect scalable solutions, • Ability to change direction quickly based on business need, • Ability to influence, collaborate, and develop strong relationships across the organization and with external clients and suppliers How this opportunity is different Get in on the ground level to bring in/propose newer technology! Are you excited about designing and making recommendations for improvements and enhancements to be made? Create reactive/responsive websites that consumers can interact with and can dynamically respond to clients. Skills and experience that will lead to success • 5 + years professional experience in a senior software engineer role, • Experience with Web 2.0 technologies such as Java and JavaScript are required, • Solid understanding of Database technologies such as SQL, PL/SQL and relational database schema design, • Proven ability to communicate and partner with various groups within an organization, • Excellent organizational skills with the ability to manage multiple initiatives at once, • Ability to work independently with accuracy and deliver results in a timely manor Preferred skills: • Experience with jQuery, React.js, AJAX and AngularJS, • Experience building and supporting with RESTful API web services Education: • Bachelor's degree in a related field (i.e., Business, Computer Science or Information Systems) from an accredited college/university or equivalent work experience. How we support our colleagues In addition to our comprehensive benefits package, we encourage a diverse workforce. Plus, our agile, inclusive environment allows you to manage your wellbeing and work/life balance, ensuring you can be your best self at Aon. Furthermore, all colleagues enjoy two "Global Wellbeing Days" each year, encouraging you to take time to focus on yourself. We offer a variety of working style solutions, but we also recognize that flexibility goes beyond just the place of work... and we are all for it. We call this Smart Working! Our continuous learning culture inspires and equips you to learn, share and grow, helping you achieve your fullest potential. As a result, at Aon, you are more connected, more relevant, and more valued. Aon values an innovative, diverse workplace where all colleagues feel empowered to be their authentic selves. Aon is proud to be an equal opportunity workplace. Aon provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, creed, sex, sexual orientation, gender identity, national origin, age, disability, veteran, marital, domestic partner status, or other legally protected status. Aon is committed to a diverse workforce and is an affirmative action employer. People with criminal histories are encouraged to apply. We provide individuals with disabilities reasonable accommodations to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment in accordance with applicable law. Please contact us to request an accommodation on _ Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time.

Location US-NY-Farmingdale Positions 1 Experience (Years) 5 Category Engineering Legrand has an opportunity for a Manufacturing Engineer to join the Data Center Power & Control Team in Farmingdale, NY. The Manufacturing Engineer develops, implements, and maintains manufacturing processes to support existing and new products. The role supports team-based process improvement efforts to ensure manufacturing processes meet requirements for capability, safety, quality, customer service, and reliability. What Will You Do? Design, improve, maintain, and implement manufacturing processes based on input from manufacturing leadership, maintenance activities, operators, and direct observation. • Plan and define sequences of operations to fabricate and assemble parts and products, including development of equipment layouts, material flow, and workspace organization to improve efficiency., • Train maintenance and production personnel on new and revised process procedures to support consistent and repeatable production., • Maintain process documentation in accordance with established standards., • Establish and maintain preventive maintenance schedules for all processes and equipment., • Develop manufacturing process plans to meet all manufacturing requirements for safety, ergonomics, process capability, quality and cost., • Present process concepts, implement approved solutions, and manage work to schedule and budget expectations., • Lead and support continuous improvement initiatives, including lean manufacturing activities, to improve safety, cost, ergonomics, quality, and process capability., • Monitor processes for compliance with safety, environmental, and regulatory requirements through audits and process controls., • Communicate findings, take corrective actions and design/implement engineered solutions to maintain compliance, • Monitor production quality and ensure processes consistently meet required quality standards., • Troubleshoot and resolve production-related engineering issues., • Provide leadership and guidance to manufacturing engineering and production team members on issues related to product manufacturability, • Other duties as assigned Education: Bachelor's Degree in Industrial Engineering Manufacturing Engineering or Mechaical Engineering or a related field with relevant experience is required. Experience: • 4 plus years of experience in a manufacturing engineering, • Metal fabrication experience is preferred Skills/Knowledge/Abilities: • Effective communication skills both verbal and written are required, • Requires strong organizational and time management skills, close attention to detail and be able to effectively handle multiple priorities, • Independent judgment is required to plan, prioritize, organize and accomplish a diversified workload, • Strong computer skills, proficient with word processing, spreadsheet and presentation software, e-mail and meeting management software. Ability to use internet and web-based resources efficiently and effectively, • Must be highly collaborative and able to work in a team-based environment, • Promotes an environment that is encourages cohesiveness and fosters trust and open communication with team, peers and all business partners, • Must possess strong analytical skills and the ability to identify trends and establish proactive corrective actions, • Must be able to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems, • Must be an effective listener, able to maintain focus extract necessary information and validate understanding of the information, • Must possess excellent project management skills, including demonstrated ability to develop and manage to a project plan, establish priorities, work to deadlines and control a number of projects at various stages of work, • Open to minimal travel as needed - possibly for trade shows, training or visiting suppliers Salary and Benefits: $90,000 - $110,000 LNCA offers comprehensive medical, dental and vision coverage, as well as distinctive benefits like a high employer 401K match, above-benchmark paid maternity and parental leave, paid time off to volunteer, and an active/growing Employee Resource Group network. LNCA is an employee-centered, growing company with tremendous opportunity About Legrand Legrand is the global specialist in electrical and digital building infrastructures. Our comprehensive offering of solutions for residential, commercial, and data center markets makes us a benchmark for customers worldwide. We harness technological and societal trends with lasting impacts on buildings with the purpose of improving life by transforming the spaces where people live, work, and meet with electrical and digital infrastructures and connected solutions that are simple, innovative, and sustainable. Legrand is a global, publicly traded company listed on the Euronext (Legrand SA EPA: LR). For more information, visit www.legrandgroup.com/en About Legrand North and Central America Legrand, North & Central America (LNCA) is a leader in the AV, Lighting & Controls, Electrical, and Data Center markets. LNCA offers comprehensive medical, dental, and vision coverage, as well as distinctive benefits like a high employer 401K match, paid time off (PTO) and holiday pay, short-term and long-term disability benefit plans, above-benchmark paid maternity and parental leave, bonus opportunities in accordance with the Company's incentive plans, paid time off to volunteer, and an active/growing Employee Resource Group network. For more information, visit legrand.us About Legrand's Data Center Power and Control Division The industry-leading brands of Approved Networks, Ortronics, Raritan, Server Technology, and Starline empower Legrand's Data, Power & Control to produce innovative solutions for data centers, building networks, and facility infrastructures. Our division designs, manufactures, and markets world-class products for a more productive and sustainable future. The exceptional reliability of our technologies results from decades of proven performance and a dedication to research and development. http://www.legrand.us http://www.youtube.com/legrandna http://www.linkedin.com/company/44580 http://twitter.com/legrandNA Equal Opportunity Employer #LI- MM1

Job Description Work Setting: Hybrid Hazen and Sawyer is seeking Principal Structural Engineer for our New York, New Jersey, Connecticut, or Massachusetts offices. As part of our Structural team. The position will work on a wide range of projects to include planning, design, permitting, and construction of structures in the ‘water space’ (i.e. drinking water, wastewater, water resources, conveyance, canals and ports). Client development, project management, technical leadership and staff mentoring opportunities will be possible for the selected individual across Hazen’s Northeast and Midwest businesses. Primary focus will be projects in NY, NJ and CT. Fieldwork and site visits from planning through construction may be required with occasional travel. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,400 employees in 90+ offices throughout the United States, Latin America, Canada, and the UK., • A flexible hybrid work schedule supports today's busy professionals Key Responsibilities: • Project engineering/management, mentoring and developing junior staff, performing site inspections and assessments of existing infrastructure. ·, • Perform assessment, design, and construction tasks for water and wastewater treatment projects., • Produce design calculations, technical reports, permitting, detailed design and engineering plans/specifications for environmental structures such as industrial buildings, pump stations, process basins, storage facilities and treatment facilities., • Participate in construction tasks for similar projects including submittal review, responding to RFI’s, site inspections and clarifications during construction, • Technical Engineering Leadership., • Staff Development. Required Qualifications: • BS degree in Civil Engineering (with a Structural Concentration preferred) or Structural Engineering, • PE license (or ability to obtain within 6 months), • 5-12 years of related experience, • Experience in design and construction of structural steel, reinforced concrete, reinforced masonry, and aluminum is required as well as knowledge of applicable building codes, design standards including ACI, AISC, ASCE, and structural analysis and design software., • Candidates must be effective communicators and be able to successfully work in a multi-discipline team environment Preferred Qualifications: • Advanced degree (Master’s or Doctorate) in Civil Engineering (with a Structural Concentration) or Structural Engineering What We Offer: • Comprehensive health benefits (medical, dental, vision, and prescription plans)., • Pre-tax flexible spending plans for medical, dependent care, and transportation., • Short- and long-term disability, plus employer-paid life insurance., • Paid holidays, floating holidays, and paid time off (PTO)., • Employer-contributed 401(k) plan and additional financial planning support., • Professional development opportunities, including tuition reimbursement, in-house training, and incentives for professional licensure and professional organization memberships., • Starting pay range for this position depends on skills, experience, education, and geographical location. #li-hybrid

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job DescriptionTech/Electronics company located in Plainview NY is looking for a Production Engineer to join their team. Full benefits including 26 days off the first year and bonus. Being the Production Engineer, you will help with the engineering and quality agenda with the overall goal to improve the customer satisfaction. You are the main contact towards the suppliers and work as part of the business team together with the supplier to develop and secure the production process, handling of quality deviations, and secure compliance to all company requirements. About the assignment: The Production Engineer is responsible for Quality Assurance including to secure process control for key processes in production. Among other things, you:• Develop new manufacturing processes, and equipment to ensure manufacturing is efficient and effective.• Investigate and analyze problems and derive solutions in the manufacturing process.• Transfer R&D prototypes into series production phase and document the manufacturing processes.• Perform and create First Article Inspection Documents. • Perform Product audits and production risk assessments at suppliers • Develops the recipe with suppliers to match desired taste profile quality and nutrition. • Lead the Supplier Development for quality and manufacturing with responsibility to identify and implement actions and execution of SDP projects. • Lead industrialization of minor news development and contribute with competence to other new developments. Knowledge about Total Quality Management - University degree in Engineering or correspondingPrevious experience as Process or Production Engineer in manufacturing PreferredExperience of industrial production conditions and Lean manufacturing Contact Michael Panter for more details: mpanter@bachrachgroup.com

Job Description Job Title: Senior Data Integration Engineer – Credit Risk Location: New York City, NY Duration: 6 Months Interview Mode: In-person (mandatory) Position Overview We are seeking a Senior Data Integration Engineer with strong Counterparty Credit Risk (CCR) experience to lead the design, development, and optimization of enterprise data pipelines. This role is responsible for ensuring stable, scalable, and high-quality data integration across risk and exposure platforms, supporting critical analytics, reporting, and regulatory requirements. Key Responsibilities Data Engineering & Integration • Design, develop, and optimize scalable data pipelines for counterparty, trade, collateral, and market data, • Build robust ETL/ELT processes for structured and semi-structured data across batch and streaming environments, • Integrate derivatives and trading data into CCR exposure and reporting platforms Risk Data & Analytics Support • Enable accurate and validated data for EPE, PFE, EAD calculations, stress testing, and limit monitoring, • Partner with business analysts and risk teams to translate requirements into technical solutions, • Support regulatory reporting and head-office risk data requirements Data Quality, Governance & Compliance • Implement data quality checks, reconciliations, and monitoring frameworks, • Ensure completeness, accuracy, and timeliness of risk data, • Align data processes with regulatory standards (e.g., Basel guidelines) Platform Optimization & Automation • Identify opportunities for process improvement, automation, and operational efficiency, • Implement monitoring, alerting, and self-healing mechanisms for data pipelines, • Lead root cause analysis (RCA) and ensure permanent resolution of recurring issues Collaboration & Leadership • Work closely with global technology, risk, and operations teams, • Drive technical documentation, knowledge sharing, and best practices, • Lead strategic data initiatives, platform migrations, and transformation programsRequired Qualifications, • 10+ years of experience in Python and advanced SQL (data engineering focus), • 5+ years in data engineering, data integration, or enterprise data management within financial services, • 3+ years supporting risk or exposure platforms in a senior/lead capacity, • 3+ years of hands-on experience with Databricks and PySpark, • Experience working in regulated environments with global/offshore teamsTechnical & Domain Expertise, • Strong understanding of Counterparty Credit Risk concepts (EPE, PFE, EAD, netting, collateral, margin, stress testing), • Experience with risk platforms and data tools (Python, PySpark, SQL, Snowflake, ETL tools, Power BI), • Hands-on experience with Databricks (Medallion Architecture, Unity Catalog, workflows/orchestration), • Exposure to Airflow/Astronomer or similar orchestration tools (preferred), • Cloud experience (Azure, Data Lake, ADF, Kafka, Spark-based distributed systems), • CI/CD pipeline implementation (Jenkins, GitLab CI, Azure DevOps), • Familiarity with risk data governance, auditability, and regulatory expectationsLeadership & Soft Skills, • Strong problem-solving and analytical thinking skills, • Ability to manage multiple priorities in time-sensitive environments, • Excellent communication skills with both technical and non-technical stakeholders, • Proven ability to drive continuous improvement and operational excellence, • Experience working with global, cross-functional teams, • Strong presentation skills with ability to translate strategy into execution For more details reach at resumes@navitassols.com. About Navitas Partners, LLC: It is a certified WBENC and one of the fastest-growing healthcare staffing firms in the US providing Medical, Clinical and Non-Clinical services to numerous hospitals. We offer the most competitive pay for every position we cater. We understand this is a partnership. You will not be blindsided, and your salary will be discussed upfront.

Job Description$85,000 - $115,000 + VIP Bonus $85,000 - $115,000 + VIP bonus Vertafore is a leading technology company whose innovative software solutions are advancing the insurance industry. Our suite of products provides solutions to our customers that help them better manage their business, boost their productivity and efficiencies, and lower costs while strengthening relationships. Our mission is to move InsurTech forward by putting people at the heart of the industry. We are leading the way with product innovation, technology partnerships, and focusing on customer success. Our fast-paced and collaborative environment inspires us to create, think, and challenge each other in ways that make our solutions and our teams better. We are headquartered in Denver, Colorado, with offices across the U.S., Canada, and India. As a Software Engineer II, you will be working within an energetic team implementing solutions that support a wide range of customers. You will develop high quality applications. You will also have opportunities to bring your creative ideas to the table to deliver better solutions to our users. If you love technology, have a passion for software, are hungry to learn, and are driven to contribute to a world-class team of engineers, you’re who we are looking for. Core Requirements and Responsibilities: Essential job functions included but are not limited to the following: • Contributes independently, • Responsible for developing new features and supporting/bug fixing existing features, • Unit and integration testing, • Debugging issues across the whole stack - OS, DB, applications, and network, • Continued ownership of technical growth including: product and business knowledge, problem solving skills, technical knowledge, process knowledge, • Closely follow industry trends and the open source community Knowledge, Skills and Abilities: • Ability to make decisions in their area of responsibility that help maintainability, reuse, security, and performance, • Ability to diagnose issues and provide solutions for multiple functional and technical areas within a product, • Can independently frame problems and perform relevant research, • Can communicate clearly to explain design decisions, • Self-motivation, • Excellent problem-solving, • Drive to improve, personally and professionally, • Collaboration with peers Qualifications: • Bachelor’s degree in Computer Science (or related technical field) or equivalent practical experience, • Experience with Agile software development, • Have a passion for innovating and crafting clean code, • 2-3 years of professional experience with C#, • 2-3 years of professional experience with MSSQL, • Experience with User Interface Design, • Understands the value of unit testing, • Enjoy solving problems through the entire application stack, • Are interested and capable of learning other programming languages as needed. Additional Requirements and Details: • Travel required up to 10% of the time., • Occasional lifting and/or moving up to 10 pounds., • Frequent repetitive hand and arm movements required to operate a computer., • Specific vision abilities required by this job include close vision (working on a computer, etc.)., • Frequent sitting and/or standing. THE VERTAFORE STORY Over the past 50 years, Vertafore has advanced the entire insurance distribution channel with the best software solutions in the industry. Today, we’re proud to say hundreds of thousands of Vertafore users rely on our solutions to write business faster, reduce costs, and fuel growth by increasing collaboration and streamlining processes. Vertafore leads the industry with secure, cloud-based mobile products that provide superior reporting and analytics, delivering actionable insight— right when customers need it most. We partner with other leading technology companies to deliver comprehensive solutions to improve the way our customers do business and serve their customers. The Vertafore Way Insurance is about relationships, and technology should make those relationships stronger. That’s why, at Vertafore, it’s our mission to transform the way the industry operates by putting people at the heart of insurance technology. By focusing on our customers, becoming better every day, and delivering results you can see, we provide the level of trust and security that insurance is all about. · Bias to Action: We're united by an innate drive to take action and make a difference in the technology and insurance spaces. · Win Together: We work together as one team, showing empathy and respect along the way. · Show Up Curious: We work to challenge one another to push boundaries and think beyond the box. · Say It, Do It: We honor every one of our commitments because integrity is important to us. · Customer Success is Our Success: We cultivate authentic relationships and follow up by actively listening to their needs. · We Love Insurance: We appreciate the impact insurance has on the world. Is this role not an exact fit for you? Keep an eye on our Careers Page for other positions! Vertafore is a drug free workplace and conducts preemployment drug and background screenings. The selected candidate must be legally authorized to work in the United States. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. Vertafore strongly supports equal employment opportunity for all applicants regardless of race, color, religion, sex, gender identity, pregnancy, national origin, ancestry, citizenship, age, marital status, physical disability, mental disability, medical condition, sexual orientation, genetic information, or any other characteristic protected by state or federal law. We do not accept resumes from agencies, headhunters, or other suppliers who have not signed a formal agreement with us.

Job Description About the job Seeking an experienced Director of Product Management with a strong background in medical devices (spine) and product management to lead the product life cycle from concept and development to innovation of Class I, Class II and Class III medical devices. The ideal candidate will have expertise in understanding our customers and develop an intuition around our products to ensure exceptional experience from introduction to delivery of product. Proven leadership skills are essential as the role will also involve working with key stakeholders including cross functional leaders, KOL’s, clients and vendors both domestically and international to ensure the successful execution of product to our end user. Key Responsibilities: Product Strategy & Support • Identify and execute product strategy for the company’s full portfolio to ensure it aligns with business goals., • Contribute to the strategic direction while focusing on cutting-edge technologies and providing regular updates to key stakeholders and senior management., • Identify, develop and execute strategic marketing and business plans to ensure maximum outcome with the goal of continued optimization., • Collaborate with cross-functional teams to ensure we capitalize on all business opportunities. Market Research & Analysis • Analyze trends and conduct market research and competitive analysis including voice of customer programs from concept to product launch including feasibility assessment, clinical validation and commercialization., • Collaborate closely with surgeons, clinical specialists, and hospital procurement teams to collect feedback and identify new product opportunities and continuous improvement., • Build key metrics and KPIs to optimize marketing and business strategies., • Troubleshoot issues and ensure task completion by establishing priorities, validating solutions and reaching a conclusion with key stake holders including functional managers, team members and senior management. Business Development & Product Lifecycle Management • Lead in developing business cases and financial models to support new product programs and existing product enhancements., • Develop and execute comprehensive product and marketing strategies for the orthopedic/spinal portfolio., • Partner with R&D and manufacturing to define product specifications, prioritize features, and ensure timely and compliant product development., • Lead go-to-market strategy, including product positioning, pricing, catalog development, and promotional planning., • Partner with key leaders to ensure successful results with P&L including achieving targets around sales revenue, margin and operating income., • Manage budget forecasts for both business and financial decisions., • Monitor product performance and collect feedback from customers to identify areas of opportunity for continuous improvement., • Partner in post launch reviews and analyze performance against current metrics and KPI’s. Continuous Improvement • Maintain various performance dashboards including KPI’s., • Conduct regular analysis to identify areas for improvement including product enhancements., • Stay current on industry trends, best practices, competitors’ activities, technological advances, regulations to support the company’s business goals and portfolio. Qualifications: • Education: Bachelor’s degree in Business Administration, Marketing, Engineer, Life Sciences or similar field. MBA or similar advance degree preferred., • Minimum 7-10 years of experience mid to senior level marketing and/or product management – medical device (spine) industry required., • Experience in the product management of Class I, Class II and Class III medical devices (orthopedic industry a plus) with ability to be solution and results oriented., • Proven ability to influence without direct authority including experience in guiding key stakeholders, senior leadership and cross functional team members toward aligned goals., • Established success rate in testing and launching business processes and initiatives including validating workflow, successful implementations and measurable outcomes., • Strong analytical mindset with ability to interpret market data and customer feedback., • Excellent skills in presentation, communication, leadership, and problem-solving skills., • Computer Programs: MS Office Suite (Excel, Outlook, Word, PowerPoint), ERP Systems a plus., • Travel – minimum 50% both domestic and international to support clinical evaluations, attend conferences, and collaborate with doctors. Additional Skills: • Endoscopic Technologies: Experience with endoscopic instrument design, optics, and surgical tool integration, • Knowledge of regulatory requirements and clinical practice in medical device industry a plus., • Certifications: Lean Certification (Black Belt or Green Belt a plus) Salary range is $180,000 - $200,000/annual This position is full time, on-site and located in our headquarters in Baldwin, NY. An employment offer is based on the candidate's professional experience, specialty, skillset, education, geography, related licenses or certifications, and other business needs. The compensation range indicated does not include other forms of compensation or benefits. We value the diversity of our team and inspire creativity in our innovation. elliquence proudly provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any kind without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state and local laws. We are committed to working with and providing reasonable accommodation to individuals with disabilities. If you need any reasonable accommodation due to a disability for any part of the application process, please email hr@elliquence.com. Powered by JazzHR DUYGGuQCTR

Job Description The Supplier Quality Engineer will be responsible for executing and expanding on key initiatives inside of the supplier quality organization. The Supplier Quality Engineer will be responsible for executing various supplier quality engineering related activities such as Compliance, Process, and Product Audits, MRB, FAI Witnessing, Review and Sign off, Problem Solving, Corrective and Preventive Actions, Supplier Performance Reporting and other Quality Improvement Activities. Job Responsibilities: • Assess suppliers manufacturing and quality processes through performing supplier audits following various standards depending on the type of audit. Audits may include but not limited to the following: AS9100 Compliance Audits, special processes, APQP audits, process, and product audits., • Lead and/or support MRB activities to achieve optimal disposition of non-conforming material and ensure that adequate corrective actions are implemented., • Perform on-site supplier visits for root cause analysis and verification of corrective actions of supplier quality issues, • Promote and facilitate the use of customer preferred techniques for continuous improvement such as Lean, Six-Sigma, Poka-Yoke, and Process Failure Mode and Effects Analysis (PFMEA), • Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers., • Support suppliers in the evaluation of existing manufacturing or business processes, identification of opportunities for improvement, and development of solutions to optimize supplier performance using various problem-solving techniques., • Provide technical guidance and assistance to suppliers to solve process and product quality issues and improve internal and outgoing quality performance., • Develop and maintain detailed and accurate reporting of supplier performance and quality improvement progress. Report weekly and monthly on supplier progress to meet customer expectations., • Undertake special projects as required, • Develop and maintain strong relationships with internal and external stakeholders to ensure optimal performance., • Communicate efficiently and effectively with all stakeholders to ensure timely and effective responsiveness to abnormalities. Required Skills • 8+ years of hands-on experience as a Quality Engineer in an Aerospace Manufacturing Environment, • 5-8 years of FAI experience with AS9102 (FAI) standards at a quality engineering level., • Strong understanding of various Engineering Processes, Standard Drawings Conventions, Interpreting Drawing, Specifications, and GD&T, • 5-8 years' experience hands-on experience with the ISO9001 and AS9100 Quality Management Systems Processes, especially in Production, Quality, and logistics, • Knowledge of, (or hands-on experience preferred), with FAA, EAR, and ITAR standards and regulations, • Experience leading customer audits, • Strong verbal, written and communication skills, • Project management, time management, problem solving and organization, • Ability to work as an effective team member and lead other team members Additional Desired Skills: • Prior practical experience and implementation of Quality Engineering tools and systems such as: DOE, FMEA, SPC, RCCA, APQP, PPAP, controls plans, material control, process control, systems performance, product evaluation, MSA, metrology, automated measurement, and software is preferred. General Requirements • Ability to pass background and drug screen, • Valid drivers license and auto insurance required., • Vision exam is required prior to hire. Requirements are as follows:, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist or other professionally recognized person. The following requirements shall apply., • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates, • US Citizenship Required: TRIGO ADR AMERICAS can restrict hiring to US Citizens when government contracts require us to do so. 8 U.S.C. § 1324b(a)(2)(C). Additional Qualifications (Preferred): • Bachelor's degree from an accredited college in a technical discipline, (i.e., Industrial Engineering, Mechanical Engineering, Quality Management, etc.), • ASQ or equivalent professional certifications such as CQE, CQT, CQA, CMQ, CSQP …etc., • Six Sigma Green Belt or Black Belt Certification. WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • Requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employment Pay Range $70,000-105,000 Annually. Please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . Powered by JazzHR bG0xIH5Pqj

Job ID: 729406BR Date posted: May. 27, 2026 Description:Lockheed Martin's RMS team at Mitchel Field, Long Island (NYC Metro Area) is seeking a full-time Early Career Electrical Engineer to join a fast moving hardware group that supports the U.S. Navy's Strategic Navigation Submarine Program. In this role, you will rotate across a variety of tasks - CCA/board design & troubleshooting, FPGA development, cable assembly design & troubleshooting, network diagram creation, etc -giving you broad exposure to both tactical and auxiliary systems across the entire engineering product lifecycle. You will also collaborate across teams, as well as directly with our customer, in order to respond to emergent issues and concerns from our fleet and forward sites. The successful candidate will have experience and/or knowledge of core EE concepts (circuit analysis, power distribution, signal integrity, etc) and experience working with electrical design documentation (schematics, network diagrams, CCA/Board layouts, etc). This role is ideal for a recent graduate with 1-2 years of experience who enjoys learning on the job and adapting to evolving project needs. Must be a US Citizen; This position will require a government security clearance.; This position is located at a facility that requires special access. Basic Qualifications: • Bachelor's degree in Electrical Engineering (or related discipline) from an accredited institution, • 1-2 years of relevant professional experience (internships, co‑ops, or full‑time), • Applied Experience with core EE concepts such as circuit analysis, power distribution, signal integrity, etc, • Experience working with electrical design documentation (schematics, network diagrams, CCA/board layouts), • Familiarity with FPGA design flow, • Ability to work effectively on Agile teams, both on‑site and remotely, • Strong interpersonal & time‑management skills, • Must be a US Citizen.; This position will require a government security clearance; This position is located at a facility that requires special access Desired Skills: • Advanced degree (M.S) in Electrical Engineering, Computer Science, Physics, or related field, • Proficiency with CAE tools such as Altium Designer, Zuken CR-8000, or AutoCAD Electrical., • Hands‑on FPGA experience (e.g., Xilinx/Intel families) including IP integration and board bring‑up, • Power‑systems knowledge (UPS, battery management, etc), • Familiarity with Position, Navigation, and Timing (PNT) concepts, including inertial navigation algorithms Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Secret Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Part-time Remote Telework: The employee selected for this position will work part of their work schedule remotely and part of their work schedule at a designated Lockheed Martin facility. The specific weekly schedule will be discussed during the hiring process. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 9x80 every other Friday off The base range for this position in New York is $101,654 - $160,620. Benefits offered: Medical, Dental, Vision, Life Insurance, Short-Term Disability, Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Education Assistance, Parental Leave, Paid time off, and Holidays. The wage range and benefits summary is a general guideline and is governed by the applicable collective bargaining agreement when extending an offer. Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: 4 yr and up College Business Unit: RMS Relocation Available: Possible Career Area: Electrical Engineering Type: Full-Time Shift: First

Job DescriptionQuality Management Systems Supervisor Job Summary The Quality Management Systems Supervisor will oversee the development, implementation, and maintenance of the organization’s Quality Management System (QMS) to ensure compliance with industry regulations and standards (ISO 9001, ISO 13485, AS9100). Reporting to the Director of Quality Affairs, this individual will drive continuous improvement, support in leading in internal/external audits, manage CAPA processes, and provide cross-functional training to enhance quality awareness. Key Responsibilities • Manage the QMS structure, ensuring all policies, procedures, and Work Instructions (SOPs) are compliant with regulatory requirements and align with company strategic goals., • With guidance from the Quality Affairs Director, lead both internal and external audits (customer, registrar, regulatory), coordinate audit finding responses, and verify the effectiveness of corrective actions., • Lead root cause analysis (RCA) for non-conformances, customer complaints, and deviations, implementing effective Corrective and Preventive Actions (CAPA)., • Drive continuous improvement initiatives using lean methodologies, SPC (Statistical Process Control), and data analysis to enhance operational efficiency., • Manage the electronic Quality Management Systems (eQMS) and ensure Document Control processes are current, accurate, and compliant., • Confirms alignment of all Quality programs within the organization., • Monitor and ensure the organization’s commitment to quality meets or exceeds customer requirements and the relevant regulatory standards., • Develop, trend, and report key QMS performance metrics (KPIs) to senior management and provide solutions to guide data-driven decision-making., • Develop training materials and educate staff on QMS procedures, GMP (Good Manufacturing Practices), or regulatory compliance to cultivate a culture of quality., • Consistently review SOP and other services to improve quality and contain costs. Required Qualifications • Minimum of 5 years of experience in a leading role in Quality Management Systems or Quality Assurance in the medical device industry required (spine or neuro device companies a plus)., • Bachelor’s degree in Engineering, Life Sciences, Biomedical Engineering, Quality Management, or a related field. Master’s degree will be considered for 1 year work experience in related QMS field in medical device industry (preferably spine or neuro)., • Strong knowledge of ISO 9001, ISO 13485, or AS9100:2016 standards., • Leadership ability in root cause analysis tools, Failure Mode and Effects Analysis (FMEA), Statistical Process Control (SPC), and electronic QMS software., • Certified Internal Auditor (ISO 9001/13485) preferred., • Lean Six Sigma Certifications preferred (Black Belt and/or Green Belt)Required Skills & Competencies, • Excellent written and verbal communication skills for interfacing customers and regulators., • Proven ability to partner and influence cross-functional teams, lead/mentor through collaboration and influence without direct authority., • Strong analytical abilities to interpret data and implement effective, sustainable solutions., • Proficient in problem solving with independent thought and judgement while using resources both internally and externally., • Work efficiently and proactively cross functionally in a team setting while being sensitive to deadlines., • High level of accuracy in document review and compliance assessment., • Successful record of ability to work both independently and in a team environment., • Skilled in statistical quality methods, Lean principles, Six Sigma, and Root Cause Analysis for data-driven decision-making., • Determined and proactive mindset who is motivated to make a difference with a high standard of excellence.Preferred Qualifications, • ASQ Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)., • Experience in a heavily regulated industry (Medical Device or Pharma)., • Administration experience for document control. Salary Range: 95,000-105,000/annual An employment offer is based on the candidate's professional experience, specialty, skillset, education, geography, related licenses or certifications, and other business needs. The compensation range indicated does not include other forms of compensation or benefits. We value the diversity of our team and inspire creativity in our innovation. elliquence proudly provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any kind without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state and local laws. We are committed to working with and providing reasonable accommodation to individuals with disabilities. If you need any reasonable accommodation due to a disability for any part of the application process, please email hr@elliquence.com. Powered by JazzHR xLI3YJSudb

Job Description Cyber Security Engineer WHO WE’RE LOOKING FOR We build our culture one hire at a time. Our tireless pursuit of providing our partners with world-class management solutions starts with talking to you. Our goal is simple. We want to build great teams that can help our partners focus on delivering exceptional eye care: the kind of teams people want to be a part of, and the kind of teams our patients can’t live without. We want to learn more about you and the kind of team culture you can help us create. We’re interested in your relevant skills and what you can do. We’re even more interested in your positive attitude and flexible mindset. THE OPPORTUNITY AT HAND The Senior Security Engineer will work within Spectrum Vision’s Information Technology organization to ensure the ongoing protection of the applications, systems, network, physical assets, and data of the company and that they are operated under continued alignment with Information Risk and Security policies, standards, and compliance requirements. This will be achieved by ensuring the security tools and processes designed to protect the company’s data, systems, and network are working effectively together. This role is a technical engineering and operations position requiring superior technical design and process-building skills with the ability to advocate and influence positive transformation within the broader IT organization. OUR EXPECTATIONS OF YOU • Must be able to identify and spotlight vulnerabilities on on-premises and remote networks (including cloud operating environments), correct problems, and prevent security breaches, • Develop systems and processes for information risk and security leading practices throughout the company, • requirements and select security technology through RFP / RFI processes, • technical security standards aligned to Information Security policy and client requirements, • Key Risk Indicators and Key Performance Indicators for Security Operations services; monitors for effectiveness and develops performance improvements when necessary., • and Maintain Security Incident Response capabilities and plans and Business Continuity plans, • systems for potential vulnerabilities, • of penetration testing, network security, and the techniques used to expose and correct security flaws, • for proper management of patches to defray business impact while keeping security protocols up-to-date, • computer networks and systems for threats and security breaches, • security incident response and prepare reports on security incidents, • maintains, and implements vendor security assessment plans and conducts vendor security reviews to ensure COMPANY security policies, standards, and external compliance requirements are being met, • draft and development of vendor security related policies, standards, guidelines, procedures, and requirements, • with other security organization members on cross-business / cross-functional opportunities WHAT YOU'LL NEED TO SUCCEED • Bachelor’s degree in related field, • Must have a broad understanding of security technologies including but not limited to firewalls, vulnerability and compliance management solutions, logging and security incident and event management (SIEM) , secure access service edge (SASE) endpoint security, and cloud posture management, and cloud security, • think creatively and innovatively about the information risk and security solutions that can keep data safe while still allowing a business to successful, • have experience in working with regulations and compliance requirements including HIPAA, HITRUST, NIST CSF, ISO 2700x, SSAE-16 (SOC 1, SOC2, SOC3), EU Data Privacy and Security, Privacy Shield, and others, • have experience in developing, executing, and maintaining Security audit plans, audit standards, and vendor security reviews, • have experience in identifying cultural and educational requirements for a diverse population and effectively able communicate audit and technical concepts to them, • are an excellent written and verbal communicator, • proficient with Microsoft Office Suite (Word, Excel, Power Point), • highly collaborative with the ability to properly handle confidential information, • work well independently and in a team environment, and work well in a matrix environment, • able to multi-task, prioritize and meet deadlines, • handle stress well and are comfortable in a high volume environment, • have flexibility and willingness to participate in the work processes of an international organization, including conference calls scheduled to accommodate global time zones Industry Certifications (Must be able to obtain one or more within 18 months if not currently certified): • Information Systems Auditor (CISA), • Information Systems Security Professional (CISSP), • in Risk and Information Systems Controls (CRISC), • Information Security Manager (CISM) WHO WE ARE We’re a leading management services organization proudly serving ophthalmology practices and ambulatory surgery centers throughout the Mid-Atlantic and New England regions. We work tirelessly to provide our partners with access to world-class management solutions—including human resources, marketing and patient retention services, finance and accounting services, payroll management, and information technology—so our partners can focus on delivering exceptional eye care. Our leadership team is composed of some of the most experienced individuals in the eye care business. Our senior management team has a combined 200 years of eye industry experience collaborating with some of the most recognized practices in the nation. With nearly 1,400 employees, we support over 50 clinic locations, five state-licensed ambulatory surgery centers, and over 110 surgeons, doctors and other medical professionals. Our brands include OCLI Vision, Ophthalmic Consultants of Connecticut, Island Eye Surgicenter, New Vision Cataract Center and others. At Spectrum Vision Partners we know that cultivating diversity and fostering an inclusive work environment is critical to our impact and success. We create an environment where no individual is advantaged or disadvantaged because of their background. We offer equal opportunity employment regardless of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability status, age, marital status, or protected veteran status. With a commitment to maintaining a bias-free environment in which harassment is prohibited, we respect cultural diversity and comply with the laws of the places in which we operate. We expect our business partners, suppliers, clients, and all of our team members to uphold these commitments.

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

The Manufacturing Engineer must have the ability to analyze problems and processes and offer solutions or work with senior engineers to implement solutions. Experience working with electronics, computers, automotive or robotics or similar technology field required. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000 - $120,000 annually and offers a competitive benefits package. #LI-KR1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Assists in planning and designing processes for an electronics manufacturing facility ., • Maximizes efficiency by analyzing layout of equipment, workflow, assembly methods, and work force utilization in an electronic environment., • Daily tasks will involve working hand in hand with production in an Electronic Metering Production Department, • Determines the parts, equipment, and tools needed to achieve manufacturing goals according to product specifications., • Generates, reviews and updates work instructions and procedures as necessary to improve cycle times, cost and quality., • Works on projects/matters of limited complexity in a support role with other departments to assist in cost reduction and cycle time improvement., • Assists engineering with Prototype builds and creates all necessary documentation to transition product to production., • Assist production with ERP system (Netsuite/SAP) as necessary to ensure inventory and work orders are properly processed., • Bachelor's degree in manufacturing engineering/Mechanical Engineering or similar technical area., • 3-5 years' Experience in an electronics manufacturing environment where electrical testing of Printed Circuit boards and/or finished goods is performed, • Lean Six Sigma/5s Tools a Plus., • Experience with wiring, cable assemblies, PCB's, soldering and mechanical assembly of electronics strongly recommended., • Netsuite experience a plus, or ability to learn new software to assist production Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Job Description Job Title: Field Engineer / Field Technician – Construction Materials & Geotechnical Testing Overview This is a field-focused role supporting construction materials testing, geotechnical inspections, and geothermal projects throughout New York City, Long Island, and the Albany/upstate New York region. The position involves hands-on testing, site inspections, geothermal drilling support, and detailed field reporting. You will work independently on active construction sites while coordinating closely with contractors, engineers, and internal project teams to ensure quality, safety, and compliance with project specifications and industry standards. Daily travel to job sites is required, along with comfort working outdoors and in active construction environments. Key Responsibilities • Perform field testing for construction materials, including concrete slump testing, air content testing, and concrete cylinder sampling., • Conduct soil density testing using nuclear gauge and sand cone methods to verify compaction and compliance., • Perform geotechnical inspections and field testing to support foundation, earthwork, and related construction activities., • Support geothermal drilling and loop installation projects by monitoring drilling operations and installation activities., • Verify geothermal materials and installation methods for compliance with project drawings and specifications., • Inspect and monitor construction activities for QA/QC and identify nonconforming work or materials., • Verify materials on site, including concrete, soils, and aggregates, and document any deviations., • Identify field issues promptly and communicate findings to contractors, engineers, and project managers., • Ensure all work complies with applicable drawings, specifications, codes, safety requirements, and industry standards., • Complete accurate daily field reports, including test results, logs, and photo documentation., • Maintain organized records of inspections, testing data, and site observations., • Provide real-time updates on field conditions, test results, and progress to internal teams and clients., • Coordinate daily activities with site supervisors, contractors, subcontractors, engineers, and project teams., • Assist with resolving field-related issues by providing clear, data-supported input and recommendations., • Manage time effectively while supporting multiple projects across NYC, Long Island, and upstate New York. Required Skills & Qualifications • Hands-on experience with concrete testing (slump, air content, cylinder sampling)., • Experience performing soil and density testing using nuclear gauge and sand cone methods., • Experience in geotechnical inspection or construction field work., • Strong understanding of construction materials testing procedures and QA/QC practices., • Ability to complete detailed, accurate daily field reports with photo documentation., • Strong verbal and written communication skills., • Valid driver’s license and ability to travel regularly throughout NYC, Long Island, and upstate New York., • NYC SST card (required for NYC construction sites)., • Ability to work outdoors in all weather conditions on active construction sites., • Strong time management skills in a field-based role. Preferred Qualifications • ACI Concrete Field Testing Technician certification., • NICET certification in materials testing or inspection., • Experience operating nuclear density gauge equipment., • Experience supporting geothermal or drilling-related projects., • Ability to read and interpret construction drawings, specifications, and technical documents., • Engineering degree or coursework (preferred; supports advancement opportunities)., • Familiarity with geotechnical investigations, concrete testing, soil testing, and field inspections., • Strong attention to detail and commitment to quality, safety, and compliance., • Interest in long-term professional development within materials testing, geotechnical inspection, or geothermal systems. Work Environment This position is over 90% field-based and not office-focused. Work takes place on active construction and drilling sites across New York City, Long Island, and the Albany/upstate New York region. The role generally follows a day shift; however, night or weekend work may be required depending on project needs. Extended hours or multiple site visits in a single day may occur during peak periods. The position requires frequent driving between job sites and working outdoors in all weather conditions. Mileage reimbursement is provided, and the role offers a generous paid time off package to support work–life balance. Job Type & Location This is a Contract to Hire position based out of Farmingdale, NY. Pay and Benefits The pay range for this position is $24.00 - $40.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a hybrid position in Farmingdale,NY. Application Deadline This position is anticipated to close on Jun 12, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Santander Corporate & Investment Banking is seeking an Analyst to support the Structured Finance business with a focus on strategy, business development support, market intelligence, and transaction analytics. Experience with internal banking processes (credit approval support, diligence tracking, c

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s degree in Construction Management, Engineering, or related discipline. We are committed to your su

Minimum of 3-5 years of Revenue Cycle project management experience, with a strong focus on Revenue Cycle workflows and EHR systems; this includes understanding of the Revenue Cycle process across Patient Access, Midcycle/Revenue Integrity, and Back-end.

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s degree in Construction Management, Engineering, or equivalent combination of experience and educat

Work with the Technical Analyst and development team to ensure that they understand the specifications. Conduct business process modeling and generate applicable scenarios for the technology functionality testing team.

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s degree in Construction Management, Engineering, or equivalent combination of experience and educat

Assistant Project Manager (HVAC).We are seeking a motivated and detail-oriented.This hybrid role combines project coordination with job costing responsibilities, making it ideal for someone who understands both field operations and construction accounting.You’ll support multiple HVAC or constructi

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s Degree in Construction Management, Engineering, or related discipline. We are committed to your su

Develop process maps, flowcharts, and other documentation to visualize and communicate complex processes and requirements. Monitor compliance with regulatory and industry standards throughout all project processes. Conduct interviews, workshops, and surveys to understand business processes and ident

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s Degree in Construction Management, Engineering, or related discipline. We are committed to your su

Work with the Technical Analyst and development team to ensure that they understand the specifications. Conduct business process modeling and generate applicable scenarios for the technology functionality testing team.

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s degree in Construction Management, Engineering, or equivalent combination of experience and educat

Quality Specialist (QA/QC – Inspection & Documentation).A leading technology solutions provider supporting government, education, and commercial clients, with a strong presence in aerospace/defense manufacturing is seeking a hands-on.This is a full-time, on-site position.ISO and AS9100 quality

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s Degree in Construction Management, Engineering, or related discipline. We are committed to your su

A well-established mechanical contractor based in Suffolk County is seeking a Project Manager / Senior Project Manager to join their team, delivering HVAC and mechanical projects across Long Island and the Queens / Brooklyn / Manhattan corridor.This is an active requirement with a long-standing cont

Work with Senior Engineers and Lead the design and development of HVAC systems for commercial and institutional projects. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management

We are looking for experienced landscape and/or irrigation installers who are looking for a change to join our landscape lighting team.The work is outdoors so you can still enjoy working outside and utilizing your skills while taking on a lighter task of installing landscape lighting and wiring.Work

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s Degree in Construction Management, Engineering, or related discipline. We are committed to your su

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s degree in Construction Management, Engineering, or related discipline. We are committed to your su

Coordinate with clients, subcontractors, field teams, engineers, and suppliers.

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Bachelor’s Degree in Construction Management, Engineering, or related discipline. We are committed to your su

Supported by Global Procurement, Workplace Strategy & Planning (finishes/logistics), Security, IT, and Engineering. Our client is seeking a highly experienced Senior Project Manager to lead large-scale capital projects domestically and internationally, including a major Hyderabad office development

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. BS degree in a technical discipline such as Engineering (i. Background in Telecommunications/Datacom Engineerin

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Work with Senior Engineers and Lead the design and development of HVAC systems for commercial and institutional

The Project Engineer position offers an exciting opportunity to develop project schedules and processes for cutting-edge overhead transmission projects. As a leading company in engineering, construction, and infrastructure, we provide solutions for electrical transmission, substations, gas pipelines

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Identify and implement process improvements to enhance performance and delivery. Execute modeling and optimizat

Our client is seeking a highly experienced Senior Project Manager to lead large-scale capital projects domestically and internationally, including a major Hyderabad office development (~160,000 SF supporting ~800 headcount). Procurement, Workplace Strategy & Planning, Engineering, IT, Security, and

Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. Identify and implement process improvements to enhance performance and delivery. Execute modeling and optimizat

This full-time role involves designing and optimizing manufacturing processes, implementing process controls, and analyzing and solving process-related challenges. The Process Engineer will work closely with cross-functional teams to ensure production efficiency, quality standards, and continuous pr