AI Engineer - Bellmond Group Limited - London

The Shift Engineering is accountable to assist the Director of Engineering with maintaining all hotel and employee facilities and responsible for the physical integrity of all facilities and fully participates in all safety and security programmes. Some of the key processes include but are not limited to: Responsible for: · Installing, maintaining, repairing and operating Hotel machinery, equipment and related systems. · Fabricating, maintaining, installing or repairing plumbing and sanitary facilities. · Painting surfaces, trimmings and fixtures of the building and other structures. · Completing preventive maintenance and repair schedules for the building, machinery, equipment and other facilities. · Participates in the execution of new projects including planning and costing. · Prepares work schedules. · Participates/contributes in the Engineering budget and business plan preparation. · Prepares and participates in the departmental training plan. · Conducts routine inspections of the entire building including all plant areas. · Involvement in Fire, Health& Safety procedures and activities.

The candidate will be trained If you have clean driving license Keen to ear money and live in UK Get in touch to discuss more about this role

Job Description: We are Daikin D1+ Installers specialising in high-end residential and commercial installations, including concealed ducted systems, bespoke ductwork, splits, multi VRV/VRF, Chillers & AHU'S systems. We’re looking for a fully qualified, experienced in the uk, and professional Air Conditioning Installer / Engineer who can deliver work to the highest standard. This is not a trainee role – we are offering top pay for top ability and top quality only Requirements – You Must Have • Minimum 10+ years hands-on experience installing and commissioning (In the uk), • F-Gas Category 1 certification (essential) – but F-Gas alone is not enough., • NVQ Diploma in Installing and Maintaining Air Conditioning and Heat Pump Systems (or equivalent qualification)., • CSCS card (essential)., • Full UK driving licence., • Proven ability to install, commission and fault find split, multi-split, VRV/VRF systems., • Strong understanding of the refrigerant cycle and the ability to use service checkers confidently., • Ability to fault-find and test components on VRV/F systems, AHUs, and chillers., • Competence with pressure testing, vacuuming, charging, and commissioning to manufacturer standards., • Ability to read and interpret wiring diagrams, refrigerant charts, and installation schematics., • Excellent attention to detail, reliability, and pride in workmanship., • Strong communication skills and a professional approach with clients and colleagues. Desirable (but not essential) • PASMA / IPAF certification., • Electrical knowledge., • Experience managing or mentoring junior engineers., • Background in servicing and maintenance of VRV, chiller, or AHU systems., • Manufacturer training certificates (e.g. Daikin, Mitsubishi). Tools & Equipment • Engineers are expected to have their own hand and service tools, including gauges, vac pump, and flaring equipment. Having a complete professional tool kit will be reflected in your pay level., • Company van, fuel card, and specialist tools can be provided for the right candidate. Role Overview You will be responsible for: • Full installation, commissioning, and testing of air conditioning systems (split, multi-split, VRV/VRF)., • Diagnosing and rectifying faults on VRV systems, AHUs, and chillers., • Ductwork and condensate routing, ensuring a neat and professional finish., • Working on premium residential and light commercial sites., • Completing digital reports and photo documentation to a professional standard. What We Offer • £60,000–£85,000 salary, depending on experience, skill, and tool ownership., • Company van, fuel card, uniform, and tools (for the right candidate)., • Regular work with a Daikin D1-approved installer., • Door to door pay, • Bonus holidays (dependant on performance), • Opportunities for manufacturer and advanced training., • Supportive, professional working environment with long-term stability. About You You take pride in your work, understand what a proper installation looks like, and don’t cut corners. You’re professional, punctual, and capable of representing the company to clients. If you’re an experienced air conditioning engineer looking to be paid what you’re worth and work with a company that values quality over quantity, we want to hear from you. Job Type: Full-time Benefits: • Employee discount, • Free parking, • On-site parking, • Relocation assistance Work Location: In person

Architectural Revit Technician (Point Cloud / Scan-to-BIM) Breakthrough Planning Ltd • Stoke Newington, London (N16) • Full-time, permanent • £30,000–£36,000 depending on experience About us Breakthrough Planning is a planning consultancy specialising in complex and ambitious cases. We work with developers, project managers and property investors across the UK on schemes that require careful strategy, well-argued design and a considered approach to planning risk. Every proposed scheme begins with an accurate model of the existing property, which is the foundation this role provides. The role We are seeking an experienced Revit Technician to produce clean, accurate as-built Revit models from point-cloud scans of residential and small commercial buildings. The models produced in this role form the basis on which our architect develops each proposed scheme, meaning accuracy, consistency and turnaround have direct influence on project outcomes. The role is hands-on and modelling-focused, suited to a candidate who takes pride in producing precise, dimensionally reliable work at pace. You will work closely with our architect within a small team, where the contribution of each model to the wider project is clearly visible. What you’ll be doing • Registering and cleaning raw scan data (Autodesk ReCap, Leica Cyclone or similar) ready for modelling, • Converting point clouds of residential and small commercial buildings into accurate as-built Revit models, typically to LOD 200–300, • Building and editing Revit families to capture the character and detail of period and domestic properties (bays, dormers, mouldings, chimneys, etc.), • Producing clean 2D outputs from the model — plans, elevations and sections — that our architect can work straight from, • Working to survey tolerances so models are dimensionally reliable, • Maintaining consistent standards and dependable turnaround across multiple jobs, • Liaising with the architect and wider team to ensure models capture what is required Software and technical skills Essential • Autodesk Revit — strong, day-to-day proficiency, including creating and editing families, • Confident working from point cloud data and tracing it accurately into Revit geometry, • Autodesk ReCap (or Leica Cyclone / equivalent) for registering and preparing scan data, • Producing 2D drawings and sheets (plans, elevations, sections) from a Revit model, • Solid understanding of Level of Detail (LOD 200–300) and working to survey accuracy / tolerances, • Good BIM/CAD file hygiene — sensible naming, worksets, and use of templates Desirable • AutoCAD for DWG import/export and 2D tidy-up, • SketchUp, • Any experience producing presentation visuals — e.g. Revit’s rendering, Enscape, Twinmotion or Lumion — is a bonus, though the core of this role is accurate as-built modelling rather than design visualisation, • Any survey or laser-scanning experience (not essential — you will mostly work from existing point clouds) What we’re looking for • At least 6 months’ hands-on experience in point-cloud-to-Revit work, • Fast and accurate, with the ability to produce clean as-built models efficiently, • Confident registering and processing raw scan data independently, • Methodical, with a strong eye for detail and organised working practices, • Experience with residential/domestic buildings is a real plus, • Communicative, reliable, and easy to work with, • Eligible to work in the UK Details • Location: on-site at our office in Stoke Newington, London (N16). This is an in-office role so you can work closely with the team. Occasional remote working is available when needed., • Hours: 30–40 hours per week, permanent, • Salary: £30,000–£36,000 per year, depending on experience Our recruitment process Our process is designed to be transparent, straightforward and practical: 1. Share your CV and a few examples of point-cloud-to-Revit work (or a portfolio link)., 2. CV review — we will review your CV and experience, and get in touch if it looks like a good fit., 3. Short introductory call — approximately 20 minutes to discuss the role and get to know each other., 4. Practical task — if we are both happy after the call, we will send a sample point cloud similar to those you would work on in the role. Convert it to Revit as accurately as possible, with particular attention to the exterior, and screen-record the process (Loom, OBS or equivalent). Return the model and recording via Dropbox, Google Drive, WeTransfer or any equivalent file-sharing tool. We review applications as they come in, so early applicants are encouraged. About the practical task The task mirrors the real work and is an opportunity to demonstrate your workflow, accuracy and speed. We are looking for the candidate who produces the most accurate model in the least time, with the fewest mistakes. The screen recording allows us to see your process, not just the finished result.v

Location: London and South East England Job Type: Full-Time | Permanent Salary: £30,000per annum + Overtime + Company Van + Benefits About the Role We are seeking an experienced Mobile Air Conditioning Engineer to join our expanding team. This is an excellent opportunity for a motivated engineer who takes pride in delivering high-quality service and maintenance across a varied portfolio of commercial properties. The successful candidate will be responsible for carrying out planned preventative maintenance (PPM), reactive repairs, fault finding, and occasional installation work on a wide range of air conditioning equipment. Key Responsibilities • Carry out planned preventative maintenance (PPM) on commercial air conditioning systems., • Diagnose faults and complete repairs efficiently., • Service and maintain split, multi-split, VRV/VRF, and DX systems., • Complete reactive maintenance in line with service level agreements (SLAs)., • Carry out minor installation and replacement works when required., • Complete electronic job reports and documentation accurately., • Ensure compliance with health and safety regulations at all times., • Deliver a professional and customer-focused service. Requirements Essential: • F-Gas Category 1 Certification., • Experience working on commercial HVAC systems., • Full & Clean UK Driving Licence., • Strong fault-finding and diagnostic skills., • Ability to work independently and manage your own workload. Desirable: • NVQ Level 2 or 3 in Refrigeration & Air Conditioning., • Experience with Daikin, Mitsubishi Electric, Toshiba, LG, Fujitsu, or Panasonic equipment. What's on Offer • Starting Salary of £30,000, • Paid overtime., • Company van and fuel card., • Mobile phone and tablet., • Uniform and PPE provided., • 28 days holiday (including bank holidays)., • Auto enroll pension., • Ongoing manufacturer training and professional development. About You You'll be a reliable, professional engineer who enjoys working independently while providing excellent customer service. You'll be confident fault-finding, solving technical issues, and building strong relationships with clients.

• Prepare and Review of technical Proposal and tender documents, • Prepare material take-off to support construction cost estimate, • Support Lead in defining cost evaluation for assigned items, • Support Lead to review contractual technical documentation and requirements., • Support Lead to defines engineering requirements and interface with other disciplines., • Prepare the technical documentation for package requisitions (supply Specific, data sheets, calculations etc., where requested), • Verify all vendor Engineering Designs and Modification, • Define detailed engineering activities (layouts, routings, supports…)., • Coordinate activity for As built drawing and Field Engineering Management

Description Why Reeve The best spaces don't stay great by accident. Brands that care about their environments need facilities kept in top condition — fast. That's what we do. Reeve delivers facilities maintenance for brands that care about their spaces, pairing skilled engineers with a world-class tech platform to turn jobs around quickly and keep every site running, compliant and looking its best. We're the long-term maintenance partner our clients rely on, long after the doors open. The Role We're looking for a Maintenance Specialist to deliver repairs and maintenance services across our clients' property portfolios, keeping their buildings running and compliant. You will be: • Reeve's first line of response for maintenance and building issues across client sites: diagnosing faults, carrying out repairs, and escalating to specialist contractors where needed, • Carrying out planned and reactive maintenance, logging jobs and resolution paths through Reeve's platform, • Performing site inspections, identifying issues before they escalate, • Attending sites alongside contractors, ensuring works meet Reeve's standards, • Carrying out general maintenance and repairs including leaks, plumbing, minor electrical works, lock changes and light decorating, • Supporting supplier coordination and operative dispatch across the portfolio About You • Level 2 City & Guilds qualification in electrical installations, plumbing or carpentry, • Solid general maintenance skills — comfortable across trades, • Strong understanding of health and safety, • Good communication and professional client-facing manner — you'll be representing Reeve on client sites, • Well-organised with good attention to detail — you can manage a schedule across multiple sites without dropping tasks, • Comfortable working alone and as part of a team, • Happy to work in a foot mobile position, • Able to reach our warehouse in Islington for 8am Salary • £44,000 – £52,000 depending on experience We'll kit you out • 🤝 Generous stock option scheme (ask us what this means if you're not sure), • 🏖 28 days holiday a year plus Bank Holidays, • 🍼 Parental leave: up to 12 weeks paid parental leave for the primary caregiver, • 💔 Pregnancy loss support leave, • 🕺 Regular socials. We love a good party., • 🤑 Octopus MoneyCoach, • 👶 Workplace Nursery Benefit, • 🚲 Cycle to Work scheme, • 🚉 Season Ticket Loans, • 🧠 WellHub and Dr Care Anywhere to support your mental and physical health and wellbeing Interview Process 1. Video interview with a member of the People Team, 2. In-person interview with Michael O'Dwyer (Maintenance Manager) and Charlotte Vaughan-Reynolds (Head of Operations), 3. Final interview with Simon Warner (COO)