Trabajos industrial engineering technology en Levittown, New YorkCrear alertas

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications, • Familiarity with enterprise maintenance KPIs and executive reporting cadence Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

Senior Electrical Engineer US-NY-Syosset Job ID: 2025-3218 of Openings: 1 Category: MEP The LiRo Group Overview We have an immediate need for a Sr. Electrical Engineer for our Syosset, NY location. Come join our team! We are looking to build services and capabilities through the growth of our key asset- our staff. Ranked among the nation's top A/E firms by Engineering News-Record, LiRo-Hill provides construction management, engineering, environmental, architectural, and program management solutions. You can become part of an organization that has a strong track record and is looking to strengthen relationships and capabilities to continue being a trusted resource for our clients in the public and private sector. We are proud to be known as an “Integrated Construction, Design and Technology Solutions” firm and we have delivered on that label time and again. Recently, Global Infrastructure Solutions Inc. (GISI), the parent company of The LiRo Group and Hill International, Inc. consolidated a portion of the highly experienced staff of both LiRo and Hill in the Northeast to create a larger, more efficient, and cost-effective team to serve clients. LiRo-Hill is a 1100-person firm with offices in NYC, Long Island, Buffalo, Rochester, Boston and Edison, NJ. Responsibilities • Design and develop electrical systems including power distribution, lighting, fire alarm, and low-voltage systems for commercial, industrial, municipal and healthcare facilities., • Conduct site visits, inspections, field surveys to support design and construction phases., • Preparation of construction documents, including drawings, specifications, one-line diagrams and load calculations., • Ensure designs comply with applicable codes and standards., • Coordinate with multidisciplinary teams including architectural, mechanical, plumbing, and other team members., • Review of submittals and RFIs during construction administration, • Serve as Project Engineer and Project Manager on smaller, less complex projects, • Use engineering and design computer software to complete assigned work (i.e. Autodesk Revit MEP & AutoCAD), • Capable of leading a team of engineers and working independently with little guidance. Qualifications • Bachelor of Science Degree in Electrical Engineering., • Min 7 years of relevant electrical design experience., • Working knowledge of relevant codes and standards (e.g., NEC, NFPA, IEEE)., • Proficiency in AutoCAD, Revit, and electrical design software., • Professional Engineering (PE) license required, • Strong communication and organizational skills., • Commissioning experience a plus, • Preferred Skills:, • Ability to work independently with general instructions/guidance from senior engineers to produce the expected results, • Experience with sustainable design and LEED-certified projects, • Self-motivated with the ability to multitask to meet specific project deadlines Our Culture: We believe in the power of collaboration. We work hard to build a corporate culture that empowers all our employees to freely share their ideas, know their presence, and contributions are truly valued, fostering a climate where our employees are enabled to maximize their full potential. We offer a comprehensive benefits package and a positive work environment Compensation : Minimum: $120,000 Maximum: $160,000. The range provided is the salary that the Firm in good faith believes at the time of the this positing is willing to pay for the advertised position. Exact compensation will be determined on the individual candidates’ qualifications and location. The selected candidate must be authorized to work in the United States; Visa sponsorship is not available for this role. LiRo-Hill is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against on the basis of disability. #ID22 #ZR22 Compensation details: 120000-160000 Yearly Salary PI0bc2fa19d1f8-37820-39109292

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of the Operations Supervisor, Operations Lead Personnel and in coordination of fellow Operations Personnel the incumbent will perform a variety of basic tasks relevant to the day-to-day operation of the wastewater treatment plant facilities, processes and equipment, including process and equipment rounds, recording operations data and information, making observations and reporting on variations in operating conditions, maintaining logs and other required reports and forms, and provides input for corrective actions and implements corrective actions as directed. Assist Operations in efforts to maintain efficient and cost-effective facility operations while maintaining compliance with all Corporate and Regulatory environmental, health and safety rules and requirements. Primary Duties/Responsibilities: • Works a scheduled shift and will be subject to required emergency call in or shift coverage as Operational needs demand., • Under the direct Supervision of Shift Supervisor or Lead person may be required to perform some of the following tasks depending on the station assigned for that shift:, • Record and Read meters for (pumps, gauges, motors etc.…) in accordance with all regulatory requirements., • Record tank levels, sludge blanket levels., • Operate equipment pertinent to assigned workstation (GBT, BFP, overhead lifting jib crane, pumps), • Open, close and adjust valves for tanks & pumps., • Observe their process areas (pumps, motors, valves, sewage color, odor, flow) record their findings., • Collect samples for laboratory analysis., • Receive chemicals in bulk, drum and tote form., • Adjust / bleed pumps as directed., • Keep the workstation and surrounding area safe and clear of debris., • Inspect equipment for proper functionality and refer to Maintenance for any necessary repairs., • Maintain a logbook for the station they are operating., • Create work requests for equipment found to be malfunctioning or broken., • Make adjustments to equipment to optimize the operation (GBT & Dewatering)., • Troubleshoot operational issues and get approval of operations supervisor before executing. Work Environment: • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gases, greases, oils, electrical energy, solvents and vibration., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials., • Maintain a high level of focus on health, safety and environment, ensuring safety within all activities.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Associate degree (or equivalent experience) in Environmental Science, Engineering, Biology/Laboratory or related fields preferred. Knowledge/Skills/Abilities: • Requires good reading, math, writing, and verbal communication skills., • Ability to read, and record data from meters, gauges, scales, panels, computer consoles, and other equipment., • Ability to understand/execute written and oral instructions, read/understand technical instructions., • Ability to interpret data and information from technical service manuals and drawings., • Knowledge of Windows, Google Workspace, MS Office Suite, and other computer-based systems., • Knowledge of basic laboratory sampling, testing and documentation., • Ability to adjust chemical feeds and processing equipment as directed to maintain compliance., • Basic knowledge of wastewater treatment equipment and processes., • Must have the ability to maintain effective working relations w/management, supervisors, and staff., • Must be able to work as a team in a teamwork-oriented environment., • Must be safety conscious and able to work independently with little or no supervision., • Must have a general understanding of how the treatment plant works and the SPDES limits associated to the station being operated. Required Certification/Licenses/Training: • Valid NYS Driver’s license and the ability to meet risk management guidelines., • Possesses valid NY State Class 1A Wastewater Treatment License is preferred or ability to attend classes required for obtaining valid NY State Wastewater Treatment license and obtain license within 24 months. Additional Information Pay Rate: $22.91 per hour. Benefits: Our employees are covered by comprehensive benefits packages including paid time off policies; health, dental, vision, and life insurance; retirement plans, savings accounts; tuition reimbursement; paid volunteering and more. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

1st Shift Hours: 7:00am - 3:30pm Company Paid Benefits including Medical, Dental, Vision and Paid Time Off Essential Duties and Responsibilities: The Assembler will be responsible for assembling components into heat exchanger cores according to work instructions, engineering drawings, and process documents. Components must be assembled in the proper order, in proper quantities, within the allotted time, and according to quality requirements. Education and/or Work Experience Requirements: • Must be able to read and interpret engineering drawings, work instructions, and other process documentation and procedures., • Ability to work independently and complete assignments within parameters of instructions given, prescribed routines, and standard accepted practices., • High School diploma or GED preferred., • Prior experience working in an AS9100 certified manufacturing environment preferred. Physical Requirements: • Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA, and other federal, state, and local standards, including meeting qualitative and/or quantitative productivity standards., • Ability to maintain regular, punctual attendance consistent with the ADA, FMLA, and other federal, state and local standards., • Must be able to lift and carry up to 50 pounds. Due to the nature of AMETEK Hughes-Treitler's programs and products, applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code. Compensation Employee Type: Hourly Currency: USD Salary Minimum: 35,000 Salary Maximum: 40,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit https://www.ametek.com/careers for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

We are looking for a Distribution Center Associate for our Westbury, NY facility. In this role you will help maintain warehouse stock and assist in fulfilling orders. Our Material Handlers will be responsible for unloading product deliveries, staging products based on customer orders and assisting with organizing and maintaining existing inventory. This position will report to Warehouse Supervisor / Warehouse Management Team. \n We offer: \n Aside from a dynamic global culture and leading market position, we are proud to offer our employees development opportunities, competitive salary and a robust benefit program ALL available on first day of employment! \n The perks and benefits of working at Oerlikon include the following: \n\n • Comprehensive medical and prescription drug plan with low premiums, company sponsored HSA contributions and without cumbersome waiting periods to keep you going strong.\n, • Excellent Dental and Vision coverage.\n, • Employee Assistance, Financial and Wellness programs to help improve all aspects of your life journey.\n, • 401(k) retirement savings plan with significant company match and financial planning and education options to help you achieve your retirement goals.\n, • Tuition reimbursement and internal education resources to satisfy your love of learning so you can continue to grow with us!\n, • Generous paid time off to support your physical and mental wellbeing.\n, • 12 paid company holidays to occasionally extend your weekends or time off.\n, • 100% company paid life insurance and disability insurance.\n, • Employee Referral Bonus program because why not to bring your friends to work every day!\n\n Your Responsibilities: \n\n • Operate forklifts, reach trucks and stock pickers to receive, ship, load, unload, move and store products and materials in a safe manner that assures material will be safe from damage and accurately accounted for.\n, • Utilize and operate RF Scanner Technology and Transportation Management System (TMS) Software to pick, pack and ship Customer and Intercompany Orders.\n, • Operate forklifts, reach trucks and stock pickers.\n, • Read work orders or receive oral instructions to determine work assignments or material or equipment needs.\n, • Adhere to all safety requirements associated with assigned duties and work location.\n, • Performs other duties as assigned that would lead to the successful operation of department, team and/or mission.\n, • Help maintain warehouse stock and assist in fulfilling orders.\n, • Our Material Handlers will be responsible for unloading product deliveries, staging products based on customer orders and assisting with organizing and maintaining existing inventory.\n\n Your Profile: \n\n • Preference will be given to candidates who are licensed to operate a forklift, available to work overtime hours during the busier times of the year.\n, • Must be able to lift up to 50 pounds at a time.\n, • 3-5 years of Material Handling/Warehouse Associate experience involving picking, packing and put away of materials in production operations.\n, • Knowledge equivalent to high school, industrial or trade training.\n, • Must be able to read and understand instructions.\n\n #joinoerlikon #joinourteam \n Are you curious? Then release your passion to succeed and APPLY to discover how you can help us build a better world and realize how you can make a personal difference by joining our global team! Our commitment is your success! \n Oerlikon is required by law to include a reasonable estimate of the current compensation range for this position, which is $21.00 to $27.00 per hour. Some positions within Oerlikon may also offer eligibility to participate in a discretionary incentive program. The salary of the finalist(s) selected for the role will be based on a variety of factors that are considered in making compensation decisions including, but not limited to, internal equity, job location, work experience, education, training, certifications, licenses, etc. Therefore, as compensation decisions are dependent on the facts and circumstances of each individual, it is likely that not all applicants will be hired at the highest end of the listed compensation range. Our total compensation package goes beyond base compensation and it will include a competitive benefits package starting with 2 weeks paid time off accrued on a monthly basis, 12 holidays, 48 hours personal/sick time (exception for NY where we follow State law,) medical, dental, vision, 401K, holidays, pet insurance and tuition reimbursement all effective day one of hire. \n About us \n Oerlikon is a global leader in surface technologies and advanced materials. With a unique portfolio spanning surface engineering, high‑performance materials, coating equipment and components, we make products better by enhancing performance, efficiency and sustainability. Oerlikon serves a wide range of industries, including aerospace, automotive, energy, medical, luxury, semiconductors and tooling. Head‑quartered in Pfäffikon, Switzerland, Oerlikon operates in 38 countries with approximately 9,500 employees, achieving sales of CHF 1.6 billion in 2024. \n Equal Opportunity Employment \n Oerlikon is an Equal Opportunity Employer. If you’d like more information on your EEO rights under the law, please click here: Know Your Rights. \n If you are unable to complete an application or respond to a job opening because of a disability, please contact us at [email protected] or [email protected]. This contact information is for accessibility requests only and is not intended for inquiries about the status of applications or for third-party vendor/agency requests. \n Oerlikon will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. 41 CFR 60-1.35(c) \n Agencies \n Oerlikon only accepts agency resumes for positions that have been explicitly approved by HR for third-party support. We work exclusively with our approved vendors who have agreed to Oerlikon’s terms and conditions and have an executed contract in place. Any resumes or profiles submitted to Oerlikon employees for roles not approved and requested by HR will be considered unsolicited, and Oerlikon will not be obligated to pay a placement fee.

Job Description: • Provide dedicated on-site IT/OT support, ensuring seamless operations, rapid incident resolution, and proactive maintenance at sites. Act as the primary point of contact for all local IT/OT issues and coordinate with remote teams for escalations. Responsibilities :- Incident Management & Resolution: • Act as Site SPOC for critical incidents (P1/P2) and coordinate with the Critical Incident Manager., • Perform triage and assignment of site alerts/incidents., • Provide hands-and-eyes support for break-fix issues that cannot be resolved remotely., • Adhering to SLAs agreed in the Scope, • ITIL Processes awareness and adhering to ITIL process workflow. Site Operations & Preventive Maintenance: • Conduct daily site walkthroughs and routine checks., • Maintain site-specific knowledge base and update manuals., • Performs routine maintenance and preventive checks to ensure the health of critical IT systems, • Assist in planned change management activities requiring on-site presence. Collaboration & Communication: • Bridge between L2/L3 support teams and business stakeholders., • Engage and escalate IT issues impacting business operations., • Coordinate and shadow dispatch engineers during work completion., • Reporting to the Track Lead / Team Lead at Site, • Handling tickets/requests to troubleshoot the nature of reported problems and taking necessary steps to, • resolve those problems, • Troubleshooting technical issues, • Attends operations related meetings., • Site review & meetings with site SPOC., • Meetings with vendors, OEMs on open actions, • Project support meetings Required Skills / Qualifications: • Minimum 5-77yrs hands on dedicated experience as deskside/Onsite support/local IT engineer, • Strong Microsoft Operating System installation (Win10 / Win11 / MAC OS X) and troubleshooting skills., • Strong Experience in Providing Hands & feet Support for Network and Datacentre Equipment/Devices, • Familiarity of IT-OT systems (SCADA, PLC, HMI), industrial networking, Windows-based engineering workstations., • ServiceNow for SLA tracking and ticket management., • Good knowledge in handling RF scanners, industry level label printers (Zebra, etc), • Hands on experience in handling Data center hardware., • Good knowledge on Virtualization, Network, Storage servers, backups, VMs, and Cloud technology., • Strong Customer service skills, • Able to handle unforeseen situations., • Knowledge on ITIL Ticketing tools such as ServiceNow, BMC remedy etc, and ITIL concepts such as change process, problem, incidents, and requests tickets. Additional Responsibility • Might need to travel to other sites based on demand and requirements., • On-call requirement for P1/Urgent issues outside regular support hours (local business hours)., • Handle operations and customer requirements as per process and agreed SOW., • Possible rotational shifts. Soft Skills • Excellent communication and conversation skills (Verbal and Written), • Coordination with HCL internal teams, stakeholders, and vendors, • Good documentation skills, • Good working knowledge of MS OFFICE, • Should have a great customer handling skill, • Can drive HCL’s value and its methodology, • Ability to adjust to evolving processes HCL is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to secure@hcltech.com for investigation. A candidate’s pay within the range will depend on their skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.

Hours: Monday-Friday 07:00AM-03:30PM Position Summary: Responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Good communication skills, able to read and follow AMETEK work instructions and quality procedures. Duties and Responsibilities: • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions, • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment, • Prepare and maintain inspection reports, • Program and/or operate Coordinate Measuring Machine, • Perform Hardness testing, • Collect and tabulate data for SPC use, • Review Supplier F.A.I.R./Generate First Article Reports per AS9102, • Other duties as directed by the management Required Skills and Abilities: • Basic computer knowledge including MS Excel and Word, • Interpret drawing requirements/specs and geometric dimensions and tolerances, • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards, • PCDMIS programming skills, • Familiar with special process specifications for heat treat, welding, and non-destructive testing Education and Experience: • High school graduate, • 3-5 Years mechanical inspection, aerospace experience, • Post high school education in math, engineering, inspection techniques or related fields a plus Equipment Used: • Vernier calipers, • Micrometers, • Height Gauges, • CMM machines, • Other standard measuring tools/instruments Due to the nature of AMETEK Hughes-Treitler's programs and products, applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code. Please note, all Production Floor employees are required to wear steel toe boots. AMETEK Hughes-Treitler (HT) is the industry leader in high-performance, plate-fin, Aluminum/Inconel heat exchangers for Military and Commercial Engine, Rotary, Airframe, and similar applications. HT specializes in custom build-to-specification applications where thermal performance, weight, structural and reliability are key considerations. HT provides Engine Surface Coolers, Fuel-Cooled Oil Coolers, Air-Cooled Oil Coolers, high temperature Buffer/Pre-Coolers, and bundled Heat Exchanger/Fan/Blower/Duct systems for the most challenging applications/requirements. Compensation Employee Type: Hourly Currency: USD Salary Minimum: 60,000 Salary Maximum: 60,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit https://www.ametek.com/careers for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Location US-NY-Melville | US-MA-Boston | US-MI-Southfield | US-PA-Philadelphia | US-CT-Rocky Hill Company Canon U.S.A., Inc. Requisition ID 34428 Category Information Technology Position Type Full-Time Workstyle Virtual Canon USA is seeking a Wide Format Display Graphics Solutions Analyst (Analyst, Solutions). The Wide Format Display Graphics Solutions Analyst works primarily with the sales team to identify opportunities for Canon Colorado and Canon Arizona at customer sites and provide technical advice into solutions and products. They then work with the customer after the hardware is installed to provide training and integration services to maximize the effectiveness of the solution for the customer. They can be occasionally get involved in helping the customer through issues but that is not the primary focus. The candidate must ideally live near a major US airport within the Northeast. This position is full time and is considered virtual. The office will be open 5 days a week; however you will not be required to report to the office unless there is a specific business need. Note that work schedules and office reporting requirements may change from time to time based on business needs. - Responsible for the Project Management of various customers, driving the sale of a wide range of products and services utilizing Canon and 3rd party products and technologies • This is a multifaceted role that requires the project manager to be a leader and visionary, mentor, and proficient in the IT field, • Work directly with Canon customers to understand their goals. Leverage experience and skills to perform detailed discovery associated with a customer's business needs with specific focus on technology, • Effectively capture customer requirements and work with a project team to document a proposal which will meet the customer's specific needs. Coordinate the resources necessary to design and implement customer projects to completion in a manner that meets requirements, delivers customer satisfaction and ensure delivery of profitable revenue, • Provide technical guidance to sales teams and customers, • Ability to interact with multiple resources across various organizations including customers (multiple business units), sales, solutions consulting, project management, engineering, technical support and 3rd Parties as necessary, • Researches, plans and evaluates the effectiveness of processes, systems, procedures or methodologies through review and evaluation of detailed data, • A developing professional, working towards full proficiency in the job role, • Receives general instruction from manager on expected work outcomes and exercises good judgment in day-to-day matters, • Typically reports to a Manager or Senior Manager, but may report to a senior professional individual contributor when business needs dictate - Bachelor's degree in a relevant field or equivalent experience required, plus 3 to 5 years of related experience, • Experience with display graphics printing environments and RIP, • Proven success as a Project Manager and ability to manage multiple projects of various sizes simultaneously, • Proficient in IT technologies and in communicating technically with client IT professionals, • Travel of 75% or more in the assigned region is expected for this position, • This position works remotely from a home office located near a major metropolitan city/airport and requires overnight travel, • Individual must possess a clean valid state driver's license in order to obtain the position, • This position requires driving, therefore a valid driver's license and acceptable driving record are necessary. Additionally, because this position requires driving for company business as an essential function of the job, must remain in compliance with company safety guidelines and policies We are providing the anticipated salary range for this role: $76,150 - $114,040 annually. About our Company - Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years*. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at www.usa.canon.com and connect with us on LinkedIn at https://www.linkedin.com/company/canonusa. Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer You'll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -"Dress for Your Day" attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you can't get anywhere else *Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at https://www.usa.canon.com/about-us/life-at-canon/benefits-and-compensation We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers' site https://www.usa.canon.com/about-us/life-at-canon, we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at https://www.usa.canon.com/about-us/life-at-canon. #CUSA Virtual - This position is considered virtual. The office will be open 5 days a week; however, you will not be required to report to the office unless there is a specific business need. Note that work schedules and office reporting requirements may change from time to time based on business needs. #PM19 #LI-AV1 #LI-REMOTE We can recommend jobs specifically for you! Click here to get started.

Location US-NY-Farmingdale Positions 1 Experience (Years) 5 Category Engineering Legrand has an opportunity for a Manufacturing Engineer to join the Data Center Power & Control Team in Farmingdale, NY. The Manufacturing Engineer develops, implements, and maintains manufacturing processes to support existing and new products. The role supports team-based process improvement efforts to ensure manufacturing processes meet requirements for capability, safety, quality, customer service, and reliability. What Will You Do? Design, improve, maintain, and implement manufacturing processes based on input from manufacturing leadership, maintenance activities, operators, and direct observation. • Plan and define sequences of operations to fabricate and assemble parts and products, including development of equipment layouts, material flow, and workspace organization to improve efficiency., • Train maintenance and production personnel on new and revised process procedures to support consistent and repeatable production., • Maintain process documentation in accordance with established standards., • Establish and maintain preventive maintenance schedules for all processes and equipment., • Develop manufacturing process plans to meet all manufacturing requirements for safety, ergonomics, process capability, quality and cost., • Present process concepts, implement approved solutions, and manage work to schedule and budget expectations., • Lead and support continuous improvement initiatives, including lean manufacturing activities, to improve safety, cost, ergonomics, quality, and process capability., • Monitor processes for compliance with safety, environmental, and regulatory requirements through audits and process controls., • Communicate findings, take corrective actions and design/implement engineered solutions to maintain compliance, • Monitor production quality and ensure processes consistently meet required quality standards., • Troubleshoot and resolve production-related engineering issues., • Provide leadership and guidance to manufacturing engineering and production team members on issues related to product manufacturability, • Other duties as assigned Education: Bachelor's Degree in Industrial Engineering Manufacturing Engineering or Mechaical Engineering or a related field with relevant experience is required. Experience: • 4 plus years of experience in a manufacturing engineering, • Metal fabrication experience is preferred Skills/Knowledge/Abilities: • Effective communication skills both verbal and written are required, • Requires strong organizational and time management skills, close attention to detail and be able to effectively handle multiple priorities, • Independent judgment is required to plan, prioritize, organize and accomplish a diversified workload, • Strong computer skills, proficient with word processing, spreadsheet and presentation software, e-mail and meeting management software. Ability to use internet and web-based resources efficiently and effectively, • Must be highly collaborative and able to work in a team-based environment, • Promotes an environment that is encourages cohesiveness and fosters trust and open communication with team, peers and all business partners, • Must possess strong analytical skills and the ability to identify trends and establish proactive corrective actions, • Must be able to apply principles of logical or scientific thinking to a wide range of intellectual and practical problems, • Must be an effective listener, able to maintain focus extract necessary information and validate understanding of the information, • Must possess excellent project management skills, including demonstrated ability to develop and manage to a project plan, establish priorities, work to deadlines and control a number of projects at various stages of work, • Open to minimal travel as needed - possibly for trade shows, training or visiting suppliers Salary and Benefits: $90,000 - $110,000 LNCA offers comprehensive medical, dental and vision coverage, as well as distinctive benefits like a high employer 401K match, above-benchmark paid maternity and parental leave, paid time off to volunteer, and an active/growing Employee Resource Group network. LNCA is an employee-centered, growing company with tremendous opportunity About Legrand Legrand is the global specialist in electrical and digital building infrastructures. Our comprehensive offering of solutions for residential, commercial, and data center markets makes us a benchmark for customers worldwide. We harness technological and societal trends with lasting impacts on buildings with the purpose of improving life by transforming the spaces where people live, work, and meet with electrical and digital infrastructures and connected solutions that are simple, innovative, and sustainable. Legrand is a global, publicly traded company listed on the Euronext (Legrand SA EPA: LR). For more information, visit www.legrandgroup.com/en About Legrand North and Central America Legrand, North & Central America (LNCA) is a leader in the AV, Lighting & Controls, Electrical, and Data Center markets. LNCA offers comprehensive medical, dental, and vision coverage, as well as distinctive benefits like a high employer 401K match, paid time off (PTO) and holiday pay, short-term and long-term disability benefit plans, above-benchmark paid maternity and parental leave, bonus opportunities in accordance with the Company's incentive plans, paid time off to volunteer, and an active/growing Employee Resource Group network. For more information, visit legrand.us About Legrand's Data Center Power and Control Division The industry-leading brands of Approved Networks, Ortronics, Raritan, Server Technology, and Starline empower Legrand's Data, Power & Control to produce innovative solutions for data centers, building networks, and facility infrastructures. Our division designs, manufactures, and markets world-class products for a more productive and sustainable future. The exceptional reliability of our technologies results from decades of proven performance and a dedication to research and development. http://www.legrand.us http://www.youtube.com/legrandna http://www.linkedin.com/company/44580 http://twitter.com/legrandNA Equal Opportunity Employer #LI- MM1

1st Shift Hours: 7:00am - 3:30pm Company Paid Benefits including Medical, Dental, Vision and Paid Time Off Position Summary: Fabrication and assembly of sub-components for the completion of heat exchangers to drawing specification. Essential Duties And Responsibilites: • Prepare any cores (IE straighten and soap testing) needed for use in the welding area, • Prepare any sub-components (IE cleaning) needed for use in the welding area., • Set up cores/sub-components in welding fixture and preparing unit for welding., • Test any cores (certification required) in the leak tanks., • Review all welds for any obvious flaws (IE- Missing welds, Voids in welds, Excess weld rod, Extremely sloppy welds), • Maintain workstation clean during the shift and ensure it is clean and organized for the next shift, following all 5S instructions, • Other duties may be assigned. Required Skills and Abilities: • Must be mechanically inclined, • Must be able to read and interpret engineering drawings and blue prints of parts, • Must have mathematics skills, • Use of calipers, height gauges, micrometers, squares, grinders, sanders, routers, band saws, drill presses, hydraulic presses and other miscellaneous hand tools are required., • Must be able to read, write and converse in English Education and Experience: • High School education or equivalent, • Shop floor experience a plus Due to the nature of AMETEK Hughes-Treitler's programs and products, applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code. Compensation Employee Type: Hourly Currency: USD Salary Minimum: 30,000 Salary Maximum: 40,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit https://www.ametek.com/careers for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Job Description Lead Civil Construction Material Buyouts and Vendor Negotiations for Union Heavy Civil Projects Job Overview Company: Scalamandre Salary/Pay Rate: $95,000 to $125,000 per year, plus performance-based bonus Location: Freeport, NY — Onsite Employment Type: Full Time Project Scope: Commercial, industrial, municipal, government, federal, and public works civil infrastructure Core Work: Heavy civil, concrete, excavation, utilities, roadway, sitework, and union construction projects Mandatory Licenses & Certifications: None required The Opportunity Scalamandre is seeking an experienced Purchasing Agent to support material buyouts, vendor negotiations, and procurement coordination for complex civil and heavy construction projects across New York City and Long Island. This role is ideal for a purchasing professional who understands the pace, cost pressure, and field coordination required in self-performing civil construction. You will work closely with estimating, project management, and field leadership to secure competitive pricing, manage vendor relationships, coordinate material availability, and help ensure crews have the right resources at the right time. You will join a long-standing, family-owned contractor with deep roots in the New York market and a strong reputation in union civil construction, public works, and infrastructure. How You Will Make an Impact • Manage material buyouts for civil, heavy highway, concrete, excavation, utility, roadway, and sitework projects., • Collaborate with estimators, project managers, and field superintendents to confirm scopes, quantities, pricing, alternates, lead times, and delivery needs., • Solicit, analyze, compare, and level vendor quotes to ensure pricing aligns with project specifications, drawings, schedules, and budgets., • Negotiate pricing, terms, availability, and delivery schedules with suppliers, manufacturers, subcontractors, and specialty vendors., • Procure permanent materials, consumables, rentals, equipment-related items, and project-specific supplies for active union civil construction sites., • Support public works, municipal, government, federal, and commercial project procurement requirements., • Maintain strong relationships with local and regional suppliers serving the NYC and Long Island civil construction market., • Coordinate with field teams to resolve material delays, substitutions, delivery issues, and urgent jobsite procurement needs., • Track pricing trends, material availability, long-lead items, and supply chain risks that may affect project cost or schedule., • Help protect project profitability by identifying cost-saving opportunities without compromising quality, compliance, or schedule. Required Qualifications & Experience • Proven purchasing, procurement, or buyout experience within the civil, heavy highway, infrastructure, concrete, sitework, excavation, utility, or roadway construction industry., • Experience supporting a contractor that self-performs civil or concrete work., • Strong ability to read and interpret project specifications, drawings, scopes, vendor proposals, and submittals., • Demonstrated experience leveling vendor quotes and negotiating supplier pricing., • Ability to coordinate effectively with estimating, project management, field supervision, vendors, and executive leadership., • Strong organizational skills with the ability to manage multiple projects, vendors, deadlines, and priorities at once., • Clear communication style and the ability to solve time-sensitive procurement issues in a fast-moving construction environment., • Familiarity with the New York City / Long Island construction market, supplier base, or public works environment. Preferred Qualifications & Experience • 10+ years of purchasing or procurement experience in civil, heavy construction, public works, or infrastructure construction., • Experience with union civil construction projects in NYC, Long Island, or the surrounding New York market., • Experience procuring materials related to concrete, rebar, aggregates, excavation support, utilities, drainage, paving, roadway work, and site infrastructure., • Experience with municipal, government, federal, airport, DOT, or public-sector construction projects., • Bachelor’s degree in Business Administration, Supply Chain Management, Civil Engineering, Construction Management, or a related field., • Strong working knowledge of buyout documentation, purchase orders, vendor compliance, lead-time tracking, and project cost control. Compensation & Benefits • $95,000 to $125,000 annual salary, based on experience., • Performance-based bonus opportunities., • Weekly pay cycle., • 401(k) retirement savings program with employer matching and profit sharing., • Medical, dental, vision, and life insurance options., • Health Savings Account option., • Paid holidays, vacation, and sick leave., • Paid parental leave for maternity and paternity needs., • Career development, professional mentorship, and manufacturer-specific training opportunities., • Company-provided technology, including smartphone or tablet., • Regular company events., • Company vehicle access, where applicable., • Other supplemental and voluntary benefit policies exist for employees including disability, cancer, life insurance, and accident and hospitalization coverages from Aflac. About Scalamandre Scalamandre is a long-standing, family-owned civil and heavy construction firm serving New York City, Long Island, and the surrounding region. Spanning four generations, the company has built a reputation for stability, professionalism, and long-term employee growth. Our work includes commercial, industrial, municipal, government, federal, and public works infrastructure projects, with a focus on heavy civil construction, concrete, excavation, utilities, roadway work, and related self-performing construction services. We offer a supportive environment where careers are built for the long term through training, accountability, and a strong reputation in the local construction market. Learn more at www.scalamandreconstruction.com. Equal Opportunity Employer Scalamandre is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, pregnancy, gender identity or expression, sexual orientation, parental status, national origin, age, disability, genetic information, political affiliation, military service, veteran status, or any other status protected by applicable law. All qualified applicants will receive equal consideration, and selection decisions will be based on job-related qualifications, experience, and business needs.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: In coordination with Project Management and Supervisors, the incumbent will be responsible for providing the day-to-day oversight of department staff, repairs and maintenance, as well as providing operational, commercial and personnel leadership to the plant shift repair and maintenance teams to maintain efficient and cost-effective facility operations while maintaining compliance with all Corporate and Regulatory environmental, health and safety rules and requirements. Primary Duties/Responsibilities: • Decision-making responsibility for all repairs and maintenance related to the Treatment Plant, equipment, and systems., • Oversees/conducts the repairs and maintenance of the equipment related to the Treatment Plant and systems., • Supervises/delegates/oversees facility’s repair and maintenance teams and direct reports., • Assists Project Management with inventory/cost controls, financial and budgeting requirements., • Assists Project Management with setup and maintenance of operations, maintenance, and safety programs., • Assists Project Management with all efforts related to Contract Compliance., • Assists Project Management to develop a safety culture of focus and engagement at the project to achieve EH&S excellence., • Assists Project Management with compliance with Business Systems, policies and procedures., • Assists Project Management with all efforts related to project/corporate and regulatory environmental, health and safety policies and procedures., • Work closely with client/customer, vendors and contractors ensuring professional, courteous, prompt service and satisfaction., • Manage equipment, materials and supplies purchasing and inventory., • Responsible for Department’s Corporate and Regulatory EH&S compliance., • Work with other plant Departments, Engineering, and Contractors to coordinate projects., • Manage, evaluate, schedule, and develop the repair and maintenance staff and always ensure adequate staffing., • Provides leadership and directing in response to alarms and abnormal conditions and lead emergency response actions., • Independently evaluates and/or supervises the evaluation of the operation, maintenance and performance of wastewater treatment facilities, processes, systems, and equipment., • Reviews, approves, and supervises implementation of recommended improvements including analyzing and optimizing existing system designs and operating parameters, supervising performance testing and troubleshooting and resolving complex operational, equipment and instrumentation problems., • Reviews designs and constructed facilities and makes and approves recommendations for operational improvements., • Participate in the development and compliance of operating policies ensuring compliance to all environmental and safety rules., • Complete reports which document plant status equipment availability and operating data. Collect data on unplanned outages and make recommendations to minimize the probability of similar events., • Oversee internal work permits to ensure compliance with procedures., • Perform functions utilizing the approved Lock Out/Tag Out systems to help ensure that safe systems are always in place., • Ensures all equipment and processes are well maintained and functioning properly., • Oversee/Perform cleanup and housekeeping tasks for work area, tools, equipment, facilities, and grounds., • Maintain proper maintenance documents and records., • Ensure work is performed in a safe and professional manner by following all corporate and regulatory policies, procedures, and emergency response procedures., • Work weekends, holidays, and be on-call on a rotating basis/schedule. Respond to emergencies, work additional hours to complete required tasks as/and when needed., • Operate company and client owned vehicles., • Proficient in the operation of project large/powered maintenance tools and equipment., • Proficient in the operation of project heavy equipment, dump trucks, backhoe, loader, and bulldozer., • Proficient in the operation and use of various hand and power tools., • Carries out other duties as assigned. Work Environment: • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbent may be occasionally exposed to some noise, silica, dust, fumes, smoke, gasses, greases, oils, electrical energy, solvents, and vibrations., • Incumbent may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, and ladder/scaffolding, below ground and may be exposed to water and other liquid materials.Qualifications Education/Experience/Background: High School Diploma/GED is required. Advanced/Upper-Level 5+ years’ experience in Industrial or Commercial facilities repairs and maintenance. Experience in related trade positions. Knowledge/Skills/Abilities: • No physical restrictions that would prevent them from performing physical labor., • Excellent reading, math, writing, scientific, and verbal communication skills., • Excellent organizational, scheduling, and prioritizing skills and abilities., • Ability to read and interpret data from maps, engineering drawings, blueprints, gauges and graphs., • Ability to understand/execute written and oral instructions, read/understand complex technical instructions., • Ability to interpret service manuals and drawings and write SOPs., • Excellent troubleshooting/problem solving skills, provides input for corrective actions and implements corrective actions as needed., • Proficient in Windows, MS Office Suite, Google Workspace OPS, EAM & CMMS, and other computer-based systems., • Knowledge of computerized PLC/SCADA systems, DCS control systems, computerized operating data acquisition and historical trending systems pre., • Knowledge of normal and abnormal process and equipment conditions and capable of taking appropriate, safe actions., • Ability to maintain and repair equipment, have an excellent mechanical aptitude., • Ability to operated complex controls, processes, and equipment., • Knowledge of the operation, repairs and maintenance of power plant diesel electric generating equipment and related equipment., • Knowledge of wastewater treatment plant processes, equipment, and systems preferred., • Knowledge of facility HVAC systems and equipment., • Knowledge of proper Environmental, Health and Safety policies, procedures, and requirements., • Must be capable of being assigned in responsible charge of the facility with the ability to react to unplanned events., • Must have the ability to maintain effective working relations with management, supervisors, and staff., • Must have the ability to make decisions independently., • Proven ability to successfully manage time and prioritize work., • Must be able to communicate well with individuals at all skill, knowledge, and experience levels., • Must be able to lead by example, train, and mentor all staff and team support personnel., • Must have the ability to lead department/team effectively in all situations under any conditions., • Must be able to work closely with local contractors and vendors., • Must be able to work as a team in a teamwork-oriented environment. Required Certification/Licenses/Training: • Valid NYS Driver’s license and the ability to meet risk management guidelines, • Commercial Driver's License is desirable. Physical Requirements: • While performing the duties of this Job, the employee is regularly required to talk or hear., • The employee is frequently required to stand; walk; sit; use hand to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and taste or smell., • The employee must frequently lift and/or move up to 50 pounds., • Specific vision abilities required by this include close vision and distance vision. Additional Information Pay Range: $105000 to $120000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description The Process Engineer is responsible for developing, maintaining, and improving configuration processes and operational work instructions used in the provisioning and deployment of IoT devices. This role creates and manages device configuration workbooks, supports manufacturing and operations teams, and ensures quality standards are consistently met through process adherence, First Article Inspections (FAIs), audits, and continuous improvement initiatives. This position works cross-functionally with Operations, Engineering, Quality, Supply Chain, and Customer Support teams to ensure accurate, scalable, and compliant device configuration processes. CORE ACCOUNTABILITIES Process Engineering & Device Configuration • Develop, maintain, and optimize configuration workbooks, process documentation, and work instructions for IoT device provisioning and deployment • Translate technical product requirements into clear operational procedures and configuration workflows, • Support configuration activities including firmware loading, SIM provisioning, network setup, labeling, serialization, and customer-specific programming requirements • Collaborate with Engineering and Product teams to implement new product introductions (NPI) and process changes • Identify opportunities to improve configuration efficiency, reduce errors, and streamline workflows, • Assist in troubleshooting device configuration issues and support root cause analysis activities, • Maintain process version control and ensure documentation accuracy across manufacturing and operations environments Quality & Compliance • Ensure configuration workbooks and operational procedures are consistently followed by production and operations teams • Conduct process audits and monitor adherence to established quality standards and work instructions, • Support First Article Inspections (FAIs) for new products, configuration changes, or process updates, • Assist with internal, customer, and external audits by preparing documentation and supporting corrective actions, • Participate in CAPA, nonconformance investigations, and continuous improvement initiatives, • Monitor quality metrics and support implementation of corrective and preventive actions, • Help maintain compliance with ISO, customer, and regulatory requirements where applicable Cross-Functional Collaboration • Partner with Manufacturing, Supply Chain, Quality, and Technical Support teams to ensure successful device deployment and operational readiness • Provide training and guidance on configuration processes and documentation updates, • Support scaling of configuration operations for new customers, products, and global deployments QUALIFICATIONS Required Qualifications -Bachelor’s degree in Engineering, Manufacturing, Industrial Technology, Supply Chain, or related field preferred -2–5 years of experience in process engineering, manufacturing engineering, quality engineering, or technical operations -Experience working with IoT devices, electronics manufacturing, or technical configuration environments preferred -Knowledge of process documentation, work instructions, and manufacturing workflows -Familiarity with quality systems, audits, and First Article Inspection (FAI) processes -Strong analytical, troubleshooting, and organizational skills -Proficiency with Microsoft Excel and process documentation tools -Experience with ERP, MES, or quality management systems is a plus Preferred Qualifications -Experience supporting ISO 9001 or similar quality management systems -Knowledge of Lean Manufacturing and continuous improvement methodologies -Familiarity with cellular connectivity, firmware management, or embedded devices -Experience in high-mix, low-volume manufacturing or device provisioning environments Key Skills -Process improvement -Attention to detail -Technical documentation -Quality assurance -Root cause analysis -Cross-functional collaboration -Problem-solving -Time management OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. WORK ENVIRONMENT -Manufacturing, operations, or technical production environment -Combination of desk-based process documentation and hands-on operational support -Collaboration with internal teams, suppliers, and external auditors as needed WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to remain stationary; move; lift, push, pull and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. VISION To be the trusted global leader in IoT Connectivity Solutions for over 100,000,000+ connected devices, enabling a smarter, more connected world for all. MISSION To empower our customers to deliver transformative solutions that deliver impactful outcomes to the communities and customers they serve. KORE VALUES Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. KORE Wireless Group, Inc., is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union, or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.

Job Description The Estimator generates proposals that meet customer's specifications and other requirements, and prepares the final budget for the project, product, or service. This is accomplished through collaboration with Engineers, the Sales Team, and other related departments. Essential Job Responsibilities not limited to: Estimating • Review blueprints and make decisions on product that meets project specifications, code requirements, and any special project criteria, • Use established pricing schedules to prepare and accurately generate proposals that comply with plans, specifications, and any special project criteria provided by the Sales Reps, • Use discretion with respect to product selection to achieve customer specifications and achieving the company’s profitability, • Accurately communicate to the customer the scope of the proposal and any special deviations as it relates to the plans and specifications through generation of a scope document, • Prepare and submit the final proposal to the customer for each project using VMC’s products or services within stated timeframes Sales Support • Communicate effectively with the relevant departments to achieve objectives, which involves use of in-depth product knowledge and product application experience, • Escalate customer concerns effectively, • Accurately maintain the key project information and total scope of work in all sales proposal templates, sales estimating tools, and sales quote log, • Develop and accurately maintain all data in required sales trackers, • Support customer sales through service, education, and effective problem-solving, • Support strategic sales plan Requirements Minimum Qualifications: • Bachelor’s Degree in Engineering is a plus, • 2 years commercial construction Experience, • 2 years project management experience with a contractor is preferred., • 1 year Estimating experience with an HVAC equipment dealer, • Strong team player with excellent people and communications skills, • Proven ability to read plan drawings and blueprints, • Excellent math skills, ability to apply concepts of basic geometry, • Strong attention to detail, resourceful, self-starter and a problem solver, • Demonstrated excellence in organization and time management skills, • Exceptional customer service skills, positive and upbeat attitude, • Strong team player with excellent people and communication skills, • Must be able to travel maximum of 5% if needed, • Sales Experience is a plus ------------------------------------------------------------------ At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals, • Professional development opportunities Join our team and build a rewarding career where your contributions are valued and your growth is supported. Be a part of a fast-growing, technology-driven manufacturing company — APPLY TODAY! ------------------------------------------------------------------ We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic. Company DescriptionFor over 10 decades, VMC Group has been recognized as a world leader in the design and manufacture of vibration isolation, seismic control and shock protection products. Our comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application. VMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity. We call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders. The VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.For over 10 decades, VMC Group has been recognized as a world leader in the design and manufacture of vibration isolation, seismic control and shock protection products.\r\n\r\nOur comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application.\r\n\r\nVMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity.\r\n\r\nWe call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders.\r\n\r\nThe VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.

Job Description Lead Public Works Infrastructure Bids and Advance Toward Chief Estimator Job Overview Company: Scalamandre Salary/Pay Rate: $175,000 to $250,000 per year, plus performance-based bonus Location: Freeport, NY — Onsite Employment Type: Full Time Project Scope: Public works, heavy civil, concrete, drainage, sewer, utilities, earthwork, roadway, and infrastructure projects Core Market: New York City, Long Island, and surrounding New York public-sector markets Mandatory Licenses & Certifications: None required The Opportunity Scalamandre is seeking a Senior Heavy Civil Estimator to lead complex public works and infrastructure bids across the New York City and Long Island markets. This is a high-impact opportunity for an experienced estimator who understands self-performed heavy civil construction, union labor, public agency specifications, and the cost structure of major civil infrastructure work. The right candidate will play a key role in estimating earthwork, concrete, drainage, sewer, utilities, roadwork, support of excavation, sheeting, and related scopes. This role offers a clear long-term runway toward Chief Estimator / estimating department leadership for a self-starting professional who can own bids, lead strategy, mentor others, and help shape the future of the estimating department. How You Will Make an Impact • Lead full-scope estimates for self-performed heavy civil, infrastructure, concrete, drainage, sewer, utility, earthwork, and roadway projects., • Develop detailed quantity takeoffs, labor productions, crew structures, equipment assumptions, material pricing, subcontractor scopes, and bid strategies., • Estimate complex civil scopes involving support of excavation, sheeting, shoring, utilities, maintenance and protection of traffic, roadway reconstruction, and site infrastructure., • Apply strong knowledge of NYC, Long Island, NYS, NYC DOT, municipal, public works, and agency bidding requirements., • Build accurate labor pricing using union labor assumptions, local work rules, productivity expectations, and project-specific constraints., • Solicit, analyze, level, and negotiate material, vendor, and subcontractor quotes before bid submission., • Coordinate with procurement, project management, and field operations to transition awarded bids into active construction., • Identify risks, opportunities, exclusions, clarifications, and value-engineering options during bid development., • Help establish estimating standards, mentor junior team members, and support the long-term growth of the estimating department., • Serve as a trusted internal technical resource for civil infrastructure pricing, bid strategy, and local market intelligence. Required Qualifications & Experience • 10+ years of dedicated estimating experience in heavy civil, public works, infrastructure, concrete, earthwork, roadway, drainage, sewer, utilities, or related civil construction., • Proven experience estimating for a self-performing civil contractor, not solely from a construction management environment., • Strong experience with union labor pricing, crew-based production, equipment costing, and field-driven estimating methods., • Deep familiarity with the New York City / Long Island civil construction market., • Demonstrated experience estimating public works, municipal, DOT, agency, government, or infrastructure projects., • Ability to read and interpret civil drawings, specifications, bid documents, geotechnical reports, addenda, schedules, and subcontractor/vendor proposals., • Experience pricing self-performed earthwork, support of excavation, concrete, utilities, roadway work, and related civil scopes., • Strong ability to level subcontractor and supplier quotes and identify scope gaps, exclusions, and risk items., • Self-starting leadership mindset with the capability and desire to advance into Chief Estimator or estimating department leadership. Preferred Qualifications & Experience • Advanced proficiency with HCSS HeavyBid or similar heavy civil estimating software., • Strong familiarity with New York City and Long Island union locals, labor agreements, and local work rules., • Experience with NYS DOT, NYC DOT, MTA, Port Authority, municipal, airport, school authority, or other public agency specifications., • Practical field experience on heavy civil, concrete, roadway, utility, excavation, or public infrastructure projects., • Bachelor’s degree in Civil Engineering, Construction Management, or a related technical discipline., • Experience mentoring estimators, leading bid reviews, or managing estimating department workflows. Compensation & Benefits • $175,000 to $250,000 annual salary, based on experience., • Performance-based bonus opportunities., • Weekly pay cycle., • 401(k) retirement savings program with employer matching and profit sharing., • Medical, dental, vision, and life insurance options., • Health Savings Account option., • Paid holidays, vacation, and sick leave., • Paid parental leave for maternity and paternity needs., • Career development, professional mentorship, and manufacturer-specific training opportunities., • Company-provided technology, including smartphone or tablet., • Regular company events., • Company vehicle access, where applicable., • Other supplemental and voluntary benefit policies exist for employees including disability, cancer, life insurance, and accident and hospitalization coverages from Aflac About Scalamandre Scalamandre is a long-standing, family-owned civil and heavy construction firm serving New York City, Long Island, and the surrounding region. Spanning four generations, the company has built a reputation for stability, professionalism, and long-term employee growth. Our work includes commercial, industrial, municipal, government, federal, and public works infrastructure projects, with a focus on heavy civil construction, concrete, earthwork, drainage, sewer, utilities, roadway work, and other self-performed infrastructure scopes. We offer a supportive environment where careers are built for the long term through training, accountability, and a strong reputation in the local construction market. Learn more at www.scalamandreconstruction.com. Equal Opportunity Employer Scalamandre is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex, pregnancy, gender identity or expression, sexual orientation, parental status, national origin, age, disability, genetic information, political affiliation, military service, veteran status, or any other status protected by applicable law. All qualified applicants will receive equal consideration, and selection decisions will be based on job-related qualifications, experience, and business needs.

The Manufacturing Engineer must have the ability to analyze problems and processes and offer solutions or work with senior engineers to implement solutions. Experience working with electronics, computers, automotive or robotics or similar technology field required. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000 - $120,000 annually and offers a competitive benefits package. #LI-KR1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Assists in planning and designing processes for an electronics manufacturing facility ., • Maximizes efficiency by analyzing layout of equipment, workflow, assembly methods, and work force utilization in an electronic environment., • Daily tasks will involve working hand in hand with production in an Electronic Metering Production Department, • Determines the parts, equipment, and tools needed to achieve manufacturing goals according to product specifications., • Generates, reviews and updates work instructions and procedures as necessary to improve cycle times, cost and quality., • Works on projects/matters of limited complexity in a support role with other departments to assist in cost reduction and cycle time improvement., • Assists engineering with Prototype builds and creates all necessary documentation to transition product to production., • Assist production with ERP system (Netsuite/SAP) as necessary to ensure inventory and work orders are properly processed., • Bachelor's degree in manufacturing engineering/Mechanical Engineering or similar technical area., • 3-5 years' Experience in an electronics manufacturing environment where electrical testing of Printed Circuit boards and/or finished goods is performed, • Lean Six Sigma/5s Tools a Plus., • Experience with wiring, cable assemblies, PCB's, soldering and mechanical assembly of electronics strongly recommended., • Netsuite experience a plus, or ability to learn new software to assist production Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo