Industrial engineering technology jobs in Clifton, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications, • Familiarity with enterprise maintenance KPIs and executive reporting cadence Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

Lead Mechanical Commissioning Engineer / Project Manager (Data Centers) - Remote This Jobot Job is hosted by: Tony Barhoum Are you a fit? Easy Apply now by clicking the "Quick Apply" buttonand sending us your resume. Salary: $135,000 - $165,000 per year A bit about us: Award-Winning International Engineering Firm with a dedicated Data Center Commissioning practice. We lead the industry in Energy Efficiency, Environmental Services, and Energy Management. We deliver Mission-Critical Infrastructure Solutions for Hyperscale Data Center Projects with top technology clients such as Microsoft, Google, Meta, and AWS. By engaging early in the design and construction process, we ensure systems perform as intended—providing a reliable foundation for long-term operational success. If you are a Commissioning Project Manager with Data Center experience please apply or email directly at https://jobot.com/apply/mechanical-commissioning-engineer-project-manager-data-centers/1847070391?utm_source=Monster Why join us? Competitive Base Salary with Bonus Salary + Time & Half Overtime 401K with Matching Contribution Unlimited PTO Complete Health Benefits with Life Insurance Fully Remote Accelerated Career Growth! Job Details Data Center Commissioning Project Manager (Lead Mechanical) - Full-Time – (Remote/Travel) Base Salary $135K to $165K (Total Comp $160K to $190K) The successful candidate must be self-motivated and well versed in Data Center projects touching on large building MEP systems design, commissioning, retro-commissioning, energy modeling/analysis and construction for complex buildings. Assessment, optimization and/or commissioning activities for utility plants will also be expected. The Data Center Project Commissioning Engineer will perform construction observations, review contract documents, develop functional test plans and execute tests for a wide variety of mechanical, and controls systems. They will execute retro-commissioning engineering/energy studies & contribute to design and energy projects for National industrial, institutional, and commercial clients. This role is also tasked with assisting in managing small to large Data Center projects to meet client expectations for technical excellence, budget, and schedule. Qualifications Bachelor’s Degree in Mechanical Engineering field preferred. Must have at least 4 years of specific Data Center Commissioning experience (Electrical/Mechanical.) Experience with Project Management - scheduling; coordination with staff & contractors; verifying field quality; accountability; cool under pressure Technical mechanical expertise Available to be On-Site ~60% to 70% Has experience with managing staff Experience in diagnosing and solving construction and operational problems. Experience managing design/energy services commissioning project resources to pre-determined scope, fee, and schedule. Knowledge of building codes, construction industry standards, such as ASHRAE, LEED. Effective leadership and written / verbal communication skills are essential. Preferred, Not Required PE, CBCP, BCxP, CEM, CCP, CxA are a plus We can offer you the opportunity to work with State-of-the-Art Clients making a meaningful impact on today's society and the next generation! Help us revolutionize the way Engineering firms treat their employees! Join us and enjoy accelerated career growth with exciting life balance at a TOP ranked Engineering firm! Interested in hearing more? Easy Apply now by clicking the "Quick Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Parsons is looking for an amazingly talented Package Interface Manager - Rail and Transit to join our team! In this role, you'll work on a large Rail and Transit projects in the Northeast. We are looking for someone with strong Systems/Installation/Design experience with Rail Systems. Mechanical, Fire/Life-Safety, Rail Systems, and Rail Interface experience. Systems Integration with Rail Systems. Program background The Gateway Program is the most urgent infrastructure program in the country - a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City, the busiest section of the Northeast Corridor (NEC). The first phase of the Gateway Program includes the Hudson Tunnel Project (HTP), which includes the construction of a new two-track tunnel under the Hudson River connecting to Penn Station New York as well as the full rehabilitation of the existing 110-year-old North River Tunnel. The Gateway Development Commission (GDC), established through bi-state legislation, is responsible for the financing and development of the Hudson Tunnel Project. Program: Major Rail Infrastructure Program Location: New York / New Jersey Metropolitan Area Position Summary: We are seeking a highly experienced and strategic Senior Interface Manager to lead the systems integration and interface management activities for a multi-billion-dollar passenger rail infrastructure program. This critical leadership role is responsible for developing, implementing, and managing the comprehensive framework that ensures all physical, functional, and contractual interfaces between dozens of design packages, construction contractors, and external stakeholders are proactively identified, controlled, and resolved. The successful candidate will be a seasoned professional with a deep understanding of both the technical and commercial complexities of delivering megaprojects in a dense, urban environment. This individual will be accountable for mitigating the significant risks associated with project interfaces and will play a central role in ensuring that all individual project components are successfully integrated into a safe, reliable, and fully functional railroad system. Key Responsibilities: + Own the Interface Management Plan (IMP): Serve as the author and ultimate authority for the program's governing Interface Management Plan, ensuring the framework aligns with industry best practices and contractual requirements. + Lead the Interface Management Team: Manage and mentor a team of Package Interface Managers and Coordinators, providing strategic direction and ensuring consistent application of the IMP across all project contracts. + Govern the Interface Management Process: Oversee the entire interface lifecycle, from early identification in the design phase through formal verification and closeout during testing and commissioning. + Chair Key Governance Meetings: Chair the program-level Interface Management Working Group (IMWG), the highest forum for adjudicating and resolving critical, escalated interface disputes between contractors and stakeholders. + Manage the Master Interface Register (MIR): Maintain the program's single source of truth for all identified interfaces, ensuring the data is accurate, current, and provides clear visibility into the status of the entire interface ecosystem. + Oversee Technical Documentation: Manage the development and baselining of all critical Interface Control Documents (ICDs), ensuring that the technical requirements at all shared boundaries are clearly and unambiguously defined. + Drive Proactive Risk Mitigation: Work closely with the project's Risk Management team to ensure that interface-related risks are identified early, assessed for their potential impact, and have robust mitigation plans in place. + Integrate with Core Project Controls: Ensure the seamless integration of the interface management process with schedule management (linking interface deliverables to the master schedule), change management (controlling changes to baselined interfaces), and systems engineering. Required Qualifications & Experience: + Education: Bachelor's degree in Engineering (Civil, Mechanical, Electrical, or Systems), Construction Management, or a related field is required. A Master's degree or professional engineering (PE) license is highly preferred. + Experience: A minimum of 15 years of progressive experience in project management, systems engineering, or construction management on large-scale, complex infrastructure projects. A minimum of 7-10 years of direct experience in a dedicated interface management role on a megaproject (>$1B) is essential. + Technical Expertise: + Demonstrated experience with major rail and transit projects, including tunnels, stations, and surface alignments. + Deep understanding of the technical interfaces between major railroad systems, including track, signaling, traction power, communications, and rolling stock. + Proven experience managing interfaces across multiple contract delivery models, including Design-Bid-Build (DBB) and Design-Build (DB). + Prior experience with formal Interface Management process, procedures and protocols. + Expert-level proficiency with dedicated Interface Management software (e.g., Coreworx, PIMS, or similar). + Strong leadership skills with a proven ability to manage and mentor teams. + Exceptional communication, negotiation, and conflict resolution skills, with the ability to facilitate agreements between sophisticated and often competing commercial and technical stakeholders. + Expert understanding of integrated project controls, including scheduling, cost management, risk management, and change control. Security Clearance Requirement: None This position is part of our Critical Infrastructure team. For more than 80 years, our experts have designed and delivered the critical infrastructure that connects and protects communities around the world. We work in collaborative teams, both within the company and with our partners and customers, to plan, design, build, and modernize infrastructure. We take special pride in projects and solutions that improve communities as well as people's quality of life by promoting economic growth, enhancing mobility, and increasing sustainability and resiliency. Powered by our people, we provide the imagination necessary to support our customers' visions-and to help them see what's next! Salary Range: $148,300.00 - $266,900.00 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status. We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/ . About Us Parsons is a digitally enabled solutions provider focused on the defense, security, and infrastructure markets. With nearly 75 years of experience, Parsons is uniquely qualified to deliver cyber/converged security, technology-based intellectual property, and other innovative services to federal, regional, and local government agencies, as well as to private industrial customers worldwide. Parsons is an equal opportunity, drug-free employer committed to diversity in the workplace. Minority/Female/Disabled/Protected Veteran/LGBTQ+. For more about Parsons, visit parsons.com and follow us on Facebook, Twitter, LinkedIn, and YouTube.

In a world of possibilities, pursue one with endless opportunities. Imagine Next! At Parsons, you can imagine a career where you thrive, work with exceptional people, and be yourself. Guided by our leadership vision of valuing people, embracing agility, and fostering growth, we cultivate an innovative culture that empowers you to achieve your full potential. Unleash your talent and redefine what's possible. Job Description: Parsons is looking for an amazingly talented RAILROAD OPERATIONS COORDINATOR to join our team! In this role you will get to work on the premier infrastructure project in the US - the Gateway Hudson Tunnel Project. Program background The Gateway Program is the most urgent infrastructure program in the country - a comprehensive set of rail investments that will improve commuter and intercity services, add needed resiliency and, in its later stages, create new capacity between Newark, New Jersey and New York City, the busiest section of the Northeast Corridor (NEC). The first phase of the Gateway Program includes the Hudson Tunnel Project (HTP), which includes the construction of a new two-track tunnel under the Hudson River connecting to Penn Station New York as well as the full rehabilitation of the existing 110-year-old North River Tunnel. The Gateway Development Commission (GDC), established through bi-state legislation, is responsible for the financing and development of the Hudson Tunnel Project. Key Responsibilities: + Act as the primary liaison between the GDC, Amtrak, freight rail operators, and other stakeholders to facilitate coordination and communication. + Ensure all parties are aligned on project schedules, operational requirements, and rail access needs, minimizing disruptions to existing rail services. + Develop and manage schedules for track access, work windows, and rail service interruptions in coordination with Amtrak and freight rail operators. + Ensure all project activities near or on active rails lines adhere to established safety and operational standards. + Leverage extensive knowledge of Amtrak and freight rail logistics to provide technical guidance on project activities, such as rail movement, scheduling, and labor requirements. + This role requires in-depth expertise in railroad operations, safety compliance, and labor coordination, as well as the ability to navigate complex interactions between construction needs and existing rail operations. Qualifications & Skills + Bachelor's Degree Engineering or related technical/business field + 10+ years of related work experience and + Broad general technical and business background + In-depth expertise in railroad operations, including safety compliance and labor coordination. + Proven ability to navigate complex interactions between construction needs and existing rail operations. + Strong communication and coordination skills to act as the primary liaison between multiple stakeholders, including GDC, Amtrak, and freight rail operators. + Experience in developing and managing schedules for track access, work windows, and rail service interruptions. + Extensive knowledge of Amtrak and freight rail logistics to provide technical guidance on project activities. Security Clearance Requirement: None This position is part of our Critical Infrastructure team. For more than 80 years, our experts have designed and delivered the critical infrastructure that connects and protects communities around the world. We work in collaborative teams, both within the company and with our partners and customers, to plan, design, build, and modernize infrastructure. We take special pride in projects and solutions that improve communities as well as people's quality of life by promoting economic growth, enhancing mobility, and increasing sustainability and resiliency. Powered by our people, we provide the imagination necessary to support our customers' visions-and to help them see what's next! Salary Range: $125,100.00 - $225,200.00 We value our employees and want our employees to take care of their overall wellbeing, which is why we offer best-in-class benefits such as medical, dental, vision, paid time off, Employee Stock Ownership Plan (ESOP), 401(k), life insurance, flexible work schedules, and holidays to fit your busy lifestyle! Parsons is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status or any other protected status. We truly invest and care about our employee's wellbeing and provide endless growth opportunities as the sky is the limit, so aim for the stars! Imagine next and join the Parsons quest-APPLY TODAY! Parsons is aware of fraudulent recruitment practices. To learn more about recruitment fraud and how to report it, please refer to https://www.parsons.com/fraudulent-recruitment/ . About Us Parsons is a digitally enabled solutions provider focused on the defense, security, and infrastructure markets. With nearly 75 years of experience, Parsons is uniquely qualified to deliver cyber/converged security, technology-based intellectual property, and other innovative services to federal, regional, and local government agencies, as well as to private industrial customers worldwide. Parsons is an equal opportunity, drug-free employer committed to diversity in the workplace. Minority/Female/Disabled/Protected Veteran/LGBTQ+. For more about Parsons, visit parsons.com and follow us on Facebook, Twitter, LinkedIn, and YouTube.

Location US-NJ | US-PA Positions 1 Experience (Years) 5 Category Sales At a Glance Legrand has an exciting opportunity for a Specification Consultant to join the Electrical Wiring Systems Wiremold Team. This is a remote position in New Jersey or Pennsylvania. The Specification Consultant will establish, grow, and maintain a strong presence within the specification and contractor communities. Develop and maintain a project pipeline reflective of market opportunities. Increase awareness among all relevant stakeholders on the value of the company's complete electrical and data communication infrastructure systems and solutions. The successful candidate is accountable for meeting and exceeding territory quota. What Will You Do? Main Activities: Organization: Individual Contributor competency model. • Main Interface: Develop and maintain a network of internal and external customers including the complete architecture and engineering design community, contractors and end users (Key Legrand vertical markets)., • Budget: Accountable for meeting and exceeding territory quota. Weekly expense management. Main Job Duties: • Write and secure LNA product specifications with key specification influences., • Establish relationships at A & E Firms through., • Design Assistance, • Implementing Legrand Master Spec, • Continuing Education Seminars, • Establish relationships with key stakeholders at electrical contractors., • Design Assistance, • Legrand Solution Training, • Project Management, • Establish relationships with major End Users in key verticals., • Collaborate with entire sales force within the Legrand family., • Support local sales team in their efforts at targeted distribution partners. This may include assistance with business reviews, training, and trade shows., • Maximize the sales tools, including daily usage of CRM software. Fully understand and utilize training and materials provided to support sales activities. Optimize time and territory management., • Performs other similar and related duties as required. Required Skills Education: • Bachelor's degree or equivalent construction industry experience. Experience: • Minimum 5 years of sales and/or marketing excellence or 10 plus years experience in one of the following industries or disciplines: electrical, communications, construction, A/V technology, engineering, architecture, or interior design. Skills/Knowledge/Abilities: • Must be proficient in negotiation and influencing skills. Able to creatively demonstrate new product concepts using professional selling skills. Lead project teams through the Construction Sales Process., • Able to assist with the creation of specification documents including engineering drawings and submittals. Perform engineering and budgetary analysis including specification writing and take-off assistance. Partner with sales team for complete market penetration., • Strong computer skills, proficient with word processing, spreadsheet and presentation software, e-mail and meeting management software. Ability to use internet and web based resources efficiently and effectively., • Must be able to communicate effectively in one-on-one and group presentation situations. Establish and maintain positive relationships with customers and industry contacts. About Legrand Legrand is the global specialist in electrical and digital building infrastructures. Our comprehensive offering of solutions for residential, commercial, and data center markets makes us a benchmark for customers worldwide. We harness technological and societal trends with lasting impacts on buildings with the purpose of improving life by transforming the spaces where people live, work, and meet with electrical and digital infrastructures and connected solutions that are simple, innovative, and sustainable. Legrand is a global, publicly traded company listed on the Euronext (Legrand SA EPA: LR). For more information, visit www.legrandgroup.com/en About Legrand North and Central America Legrand, North & Central America (LNCA) is a leader in the AV, Lighting & Controls, Electrical, and Data Center markets. LNCA offers comprehensive medical, dental, and vision coverage, as well as distinctive benefits like a high employer 401K match, paid time off (PTO) and holiday pay, short-term and long-term disability benefit plans, above-benchmark paid maternity and parental leave, bonus opportunities in accordance with the Company's incentive plans, paid time off to volunteer, and an active/growing Employee Resource Group network. For more information, visit legrand.us About Legrand's Electrical Wiring Systems Division Legrand's Electrical Wiring Systems (EWS) division provides the most complete line of residential, commercial, and industrial electrical wiring devices in the world. Through commitment to innovation and quality, EWS maintains the position of industry leader in wire and cable management and wiring devices categories, specializing in raceways, flexible floor, open space and outdoor power solutions, wire mesh cable trays and systems, and designer switches and outlets. With this comprehensive offering, EWS serves a range of exciting vertical markets, including commercial office and commercial interior, data centers, education, healthcare, hospitality, manufacturing, mixed-use developments and residential. For more information, visit legrand.us/electrical wiring devices http://www.legrand.us http://www.youtube.com/legrandna http://www.linkedin.com/company/44580 http://twitter.com/legrandNA Equal Opportunity Employer

Location US-NJ-Fairfield Positions 1 Category Manufacturing At a Glance Legrand has an exciting opportunity for a Sr. Manufacturing Engineer to join the Audio Video Division in Fairfield, NJ. The Sr. Manufacturing Engineer will provide day to day support on products being built in the manufacturing assembly area(s). This would include working with the assembly team in the identification of continuous improvement ideas that utilize lean manufacturing principles. These improvements would target processes and procedures that will enhance the quality and repeatability of the assembly process and increase productivity. What Will You Do? Identify process and assembly improvements and work with a senior engineer to implement improvement ideas into the manufacturing area using lean manufacturing principles • Provide troubleshooting support to the manufacturing floor, • Create and maintain manufacturing processes and procedures, • Provide input on the design of new product line assembly cells and implement their setup, • Provide process and procedural training to assembly personnel, • Participate in new product design reviews to identify design for manufacturability (DFM) issues and opportunities, • Review assembly documentation for accuracy through ECO reviews, • Work with packaging vendors to design custom packaging solution for high volume assemblies, • Design and implement assembly fixtures that will increase efficiencies on the manufacturing floor, • Provide Return on Investment (ROI) justification on capital expenditures, • Understand workplace hazards and take steps to proactively prevent and report hazards or injuries in the workplace. Cooperate in Safety Programs, initiatives, and investigations., • Demonstrate our five core values of Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment and Continuous Improvement Education and Experience: • Bachelor of Science degree in manufacturing, industrial or mechanical engineering or other related technical degree with a minimum of six (6) months engineering experience in a manufacturing environment; or combination of relevant education and experience, • 3D CAD work experience Required Knowledge, Skills and Abilities: • Excellent verbal and written communication skills, • Excellent troubleshooting and problem solving skills, • An understanding of lean manufacturing principles, • Ability to work in a team environment, • Proficient in the use of personal computers, internet and Microsoft Office suite of software including Word, Excel and Outlook (or related e-mail system), • Self-motivated with the ability to work with minimal supervision, • Excellent interpersonal skills, • Ability to interpret standards, specifications, procedures, drawings, etc., • Strong mechanical aptitude, • Ability to train and motivate employees at all levels, • Ability to make sound decisions within established guidelines, • Ability to demonstrate flexible and efficient time management and to appropriately prioritize workload based upon organization or department needs, • Be detail-oriented and have excellent follow-through skills, • Must possess high degree of professionalism, • Must be available for extended, varied work hours based on business need Preferred Knowledge, Skills and Abilities: • Experience with Solidworks, • Experience with SAP, • Labeling software experience, • Machine shop experience, • Multi-lingual (Spanish, Laotian, etc.) WORKING CONDITIONS/PHYSICAL DEMANDS: • While performing the duties of this job, the employee may be required to reach above shoulder level, reach below knee level, bend, stoop, squat/kneel, climb; and lift, push or pull 50 lbs. Must have the ability to make coordinated movements of the fingers and hands to grasp, manipulate, and to perform data entry on a keyboard., • Steel-toed shoes are required for working in this position, • Combination general office and regular shop assembly/distribution center environment (no air conditioning), • May require regular ground travel to other company facilities within local metropolitan area, • Long-distance or air travel as needed - not to exceed 5% travel About Legrand Legrand is the global specialist in electrical and digital building infrastructures. Our comprehensive offering of solutions for residential, commercial, and data center markets makes us a benchmark for customers worldwide. We harness technological and societal trends with lasting impacts on buildings with the purpose of improving life by transforming the spaces where people live, work, and meet with electrical and digital infrastructures and connected solutions that are simple, innovative, and sustainable. Legrand is a global, publicly traded company listed on the Euronext (Legrand SA EPA: LR). For more information, visit www.legrandgroup.com/en About Legrand North and Central America Legrand, North & Central America (LNCA) is a leader in the AV, Lighting & Controls, Electrical, and Data Center markets. LNCA offers comprehensive medical, dental, and vision coverage, as well as distinctive benefits like a high employer 401K match, paid time off (PTO) and holiday pay, short-term and long-term disability benefit plans, above-benchmark paid maternity and parental leave, bonus opportunities in accordance with the Company's incentive plans, paid time off to volunteer, and an active/growing Employee Resource Group network. For more information, visit legrand.us About Legrand's Audio Video (AV) Division Legrand AV is a global leader in designing and manufacturing electrical, data, and AV solutions. For their customers worldwide, Legrand AV is focused on providing the foundation for amazing AV experiences through innovative solutions and exceptional service that solve their customers' AV integration and technology challenges. Today and tomorrow are about keeping people connected. Legrand and the AV industry are uniquely positioned to deliver just that. Legrand AV solutions support technology to rebuild and maintain vital connections around the world. The tenacity and determination to stay connected, no matter what it takes is proof that nothing will stop Legrand AV's pursuit for life. Despite the challenges, people have adapted and found ways to collaborate, to meet, to greet, to teach, to learn. http://www.legrand.us http://www.youtube.com/legrandna http://www.linkedin.com/company/44580 http://twitter.com/legrandNA Equal Opportunity Employer

Job Description Embedded Engineer (Microprocessors) We are seeking a seasoned Electrical Engineer, embedded engineer to design and program complex electrical systems. Responsibilities: • Engineered and designed microprocessor-based, mixed-signal circuit boards for specialized products, • Developed C language embedded software for servos, ensuring smooth interaction with external systems., • Led the construction and testing of prototype circuits, providing guidance to design and technical teams., • Authored comprehensive product documentation, including user instructions, project logs, test reports, and design evaluations., • Collaborated with Manufacturing to facilitate product commercialization, manage bills of materials, and develop documentation and test fixtures., • Provided engineering support for existing products to ensure optimal performance. Requirements: • A minimum of 8+ years of experience in electro-mechanical applications, • Strong theoretical background, • Proficiency in circuit board design, schematic generation, and PCB layout tools, • Expertise in open/closed-loop servo mechanisms, motor design, and inverter development., • Experience in power supply development and industrial process control., • Ability to multitask in a hands-on environment., • Proven ability to work effectively in team settings and independently., • Provides project management assistance for control systems as needed., • Microsoft Office products to perform engineering and project management tasks., • Ability to write routine reports and correspondence., • Effectively present information to top management, customers, and employees., • Apply mathematical operations to such tasks as determination of test reliability and validity, analysis of variance, correlation techniques, and factor analysis., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Close vision, and color vision ability required, • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, reaching, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination., • Work in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times. Qualifications: • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • Working in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times Education: • B.S. in Electrical Engineering or B.S. in Electrical Engineering Technology or an equivalent degree or years of experience What we offer: • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching, mentoring helping team members realize their potential, aiding in defining goals and executing them., • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base & bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team- YOU. Looking forward to getting to know you! We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview:Thea Energy is seeking a Director - Control, Instrumentation and Diagnostics (CID) Systems to lead CID system design and execution for the company’s upcoming Eos integrated stellarator. This leader will manage and grow three tightly coupled engineering groups:- Control Systems (Eos control system architecture and integration, including fast data acquisition, PLC automation, Safety and Interlock Systems)- Instrumentation Systems (instrumentation backbone across the facility, including sensors, signal architecture, wiring, grounding, shielding, tagging, and commissioning practices)- Diagnostics Systems (plasma diagnostics control and acquisition, including real time DAQ, timing and synchronization, and low latency data pipelines for plasma control) This role will own the end-to-end delivery of CID systems from architecture and requirements through detailed design, prototyping, vendor engagement, test, installation support, and commissioning readiness. The Director will serve as a key cross-functional partner to systems engineering, controls and software, mechanical engineering, safety, and program management, ensuring electrical designs are buildable, testable, safe, and integrated. As part of a rapidly growing team, you’ll be part of the organizational build-up of a leading fusion energy company. This role will have a high degree of autonomy and must be able to move quickly. The Thea Energy team is comprised of self-motivated, creative, and fun individuals with an excitement for solving complex problems.Key Responsibility Areas: • Lead and mentor a multi-disciplinary organization spanning control systems, instrumentation, diagnostics acquisition, embedded software, and real time integration, including hiring, performance management, career development, and team structure., • Establish engineering operating rhythm: planning, prioritization, technical reviews, staffing plans, and decision-making processes., • Set technical direction and ensure consistent engineering quality across requirements, architecture, implementation, verification, and documentation., • Own the Eos CID architecture, including functional, physical, communications, timing, and data flow boundaries across fast DAQ, supervisory control, PLC automation, safety interlocks, and diagnostics acquisition., • Lead technology selection for real time control, SCADA, networking, timing, and data management, and ensure consistency across integration protocols and data interfaces., • Own the technical interface to external vendors and collaborators providing controls hardware, diagnostics hardware, and instrumentation deliverables, including technical specifications, design reviews, and acceptance participation., • Oversee development and integration of the Eos control system across major subsystems, ensuring deterministic behavior, fault handling, and operational sequencing., • Own Safety and Interlock System philosophy, including safety class logic where required, participation in hazard analyses, and alignment to functional safety practices and standards., • Own instrumentation architecture across the facility: sensor selection, signal types, isolation strategy, signal conditioning, grounding, shielding, and segregation practices for noisy, high power environments., • Oversee diagnostic acquisition architecture end to end, from front end sensors and conditioning through digitizers, FPGA processing, data streaming, and archiving in support of plasma operations and feedback control., • Partner with systems engineering to translate device requirements into CID requirements, interface definitions, and verification plans., • Run evidence based technical gates and design reviews, with clear entry and exit criteria and configuration control., • Own delivery artifacts such as requirements, interface control documents, design packages, test plans, and acceptance evidence to support procurement, installation, and commissioning., • Maintain a strong safety culture including machine protection thinking, hazard analysis inputs, and design choices that support safe installation and operations., • Provide hands on leadership in lab and field environments, coordinating with technicians and test teams for build, wiring, installation support, and debug.Ideal Experience & Skillsets:, • Bachelor’s degree or higher in Electrical Engineering, Controls, Computer Science, Physics, or equivalent., • 10 or more years of relevant experience spanning two or more of the following: integrated control systems, industrial automation, fast data acquisition, instrumentation systems engineering, diagnostics acquisition, real time embedded software., • 5 or more years of engineering management experience leading multi team organizations, including hiring and performance leadership., • Demonstrated experience owning complex system development from architecture through prototype validation and integration., • Strong foundation in safety and high reliability engineering practices, including interlocks, alarms, fail safe design, and disciplined documentation., • Strong cross functional communication skills and experience driving technical decisions across physics, mechanical, electrical, safety, and program teams., • Exceptional work ethic and communication skills., • Experience delivering CID systems for fusion devices, accelerators, advanced nuclear, or other large scientific facilities with tight timing and data fidelity requirements., • Experience with EPICS or TANGO, and industrial integration protocols such as OPC UA, DDS, Modbus, and deterministic timing networks., • Experience with functional safety workflows and standards driven PLC systems engineering., • Experience with FPGA based acquisition and low latency streaming pipelines for real time feedback and machine protection., • Familiarity integrating AI and digital twin capabilities into supervisory control and operations workflows., • Control frameworks and integration: LabView, EPICS, TANGO, OPC UA, DDS, Modbus, TCP IP., • PLC platforms: Siemens TIA Portal, Beckhoff TwinCAT, Allen Bradley, Codesys, IEC 61131 3 practices., • Timing and synchronization: White Rabbit, IEEE 1588 PTP., • Data acquisition and diagnostics: PXIe digitizers, FPGA platforms, event and timestamping frameworks, data streaming infrastructure., • Embedded and middleware software: real time embedded Linux and real time operating systems, C and C++, distributed orchestration tooling., • Instrumentation design and documentation: AutoCAD Electrical, EPLAN, tag databases, input and output lists, cable schedules and loop diagrams.#LI-RD1Company Benefits:, • Salary range $120,000-$240,000, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description About the Firm We are a rapidly expanding, multi-disciplinary land development consulting firm providing civil engineering, traffic engineering, planning, and surveying services throughout the Northeast. Our Survey Department is an integral part of the organization, supporting a wide range of private and public sector clients on commercial, industrial, residential, and redevelopment projects. As our New Jersey operations continue to grow, we are seeking a Survey Project Manager to serve as the right-hand partner to the Survey Department Leader. This individual will help guide project delivery, manage clients, coordinate field and office staff, and contribute to the long-term advancement of the New Jersey survey practice. Position Overview The Survey Project Manager is responsible for overseeing survey projects from proposal through final deliverables, while ensuring technical excellence, schedule adherence, and client satisfaction. You will play a key operational role—supporting department leadership, managing workflows, providing technical review, mentoring staff, and ensuring field and office teams stay aligned. This is an ideal opportunity for someone seeking a long-term leadership path within a modern, growth-oriented surveying environment. Key Responsibilities • Project Management & Delivery, • Direct and manage boundary, topographic, ALTA/NSPS, right-of-way, as-built, and construction layout surveys, • Coordinate project schedules, staffing, and field/office workflows, • Perform QA/QC on survey calculations, CAD drawings, maps, plats, and legal descriptions, • Conduct and review deed research, boundary analysis, and record document evaluations, • Ensure deliverables meet quality standards and regulatory requirements Client & Stakeholder Coordination • Serve as a primary point of contact for clients, contractors, and internal teams, • Prepare proposals, scopes of work, budgets, and project timelines, • Maintain strong client relationships and support business development efforts, • Provide technical explanations and project updates in a clear, professional manner Leadership & Department Support • Work closely with the Survey Department Leader to manage daily operations within the NJ survey practice, • Mentor, train, and support Survey Technicians, Crew Chiefs, and CAD staff, • Assist with developing and improving workflows, technology adoption, and resource planning, • Promote a culture of safety, accuracy, professionalism, and collaboration Qualifications • Professional Land Surveyor (PLS) license preferred, • OR actively working toward licensure (SIT or in progress), • 7+ years of progressive land surveying experience (field and/or office), • Demonstrated experience managing survey projects and interacting directly with clients, • Strong understanding of boundary resolution, ALTA/NSPS standards, construction layout workflows, and topographic mapping, • Proficiency with AutoCAD Civil 3D or Carlson Survey, • Experience reviewing deeds, easements, plats, and record documents, • Strong organizational, communication, and leadership skills, • Ability to mentor junior staff and help guide field crews, • Self-directed problem solver with the ability to make sound decisions What the Firm Offers • Competitive salary + performance-based incentives, • Health, dental, and vision insurance, • 401(k) with employer match, • Paid time off and holidays, • Professional development and support for licensure, • A collaborative and supportive team culture, • Involvement in a diverse mix of land development projects

Job Description For decades, Dempsey Uniform & Linen Supply has been committed to delivering exceptional uniform, linen, and facility service solutions to healthcare, hospitality, industrial, and commercial customers throughout the Mid-Atlantic region. Our success is built on a culture of service, reliability, operational excellence, and a commitment to the safety and well-being of our employees. As we continue to grow, we are seeking a highly motivated and experienced Corporate EHS Manager to lead and strengthen our environmental, health, safety, and compliance programs across all company locations. Position Summary The Corporate EHS Manager is responsible for developing, implementing, and sustaining a comprehensive Environmental, Health & Safety program across all Dempsey facilities. This role provides strategic leadership and hands-on oversight of EHS compliance and safety culture for industrial laundry operations, maintenance functions, warehouses, distribution centers, and commercial vehicle fleets. The Corporate EHS Manager will partner closely with plant leadership, engineering, maintenance, transportation, and operations teams to create a proactive safety culture that protects employees, ensures regulatory compliance, supports operational excellence, and advances Dempsey’s commitment to quality and customer service. Key ResponsibilitiesCorporate EHS Leadership & Compliance • Develop, implement, and continuously improve a standardized corporate EHS management system across all Dempsey facilities., • Serve as the primary company representative for OSHA, EPA, DOT, local environmental agencies, and regulatory inspections., • Conduct facility audits, compliance inspections, hazard assessments, and risk evaluations while ensuring timely corrective action completion., • Establish and monitor leading and lagging safety indicators, providing monthly executive-level reporting and recommendations., • Manage environmental permitting, regulatory reporting, hazardous waste management, wastewater compliance, and environmental stewardship initiatives., • Develop, maintain, and test company-wide Disaster Recovery Plans (DRP), emergency response procedures, crisis communications, and business continuity protocols.Healthcare Laundry & Accreditation Compliance, • Lead and support compliance initiatives associated with Healthcare Laundry Accreditation Council (HLAC) standards and Hygienically Clean certification requirements., • Partner with Operations and Quality teams to ensure facilities maintain accreditation standards related to employee safety, infection prevention, quality assurance, and operational controls., • Support audit readiness and corrective action implementation associated with accreditation reviews.Production & Laundry Operations Safety, • Partner with plant leadership to identify and mitigate risks associated with industrial laundry processing, automated material handling systems, conveyors, finishing equipment, tunnel washers, dryers, boilers, and chemical dispensing systems., • Develop and maintain Job Hazard Analyses (JHAs), Safe Work Procedures (SWPs), and risk assessments for production operations., • Oversee Lockout/Tagout (LOTO), machine guarding, ergonomics, chemical handling, and noise exposure programs., • Lead Management of Change (MOC) reviews and Pre-Startup Safety Reviews (PSSR) for new equipment, facility expansions, and process modifications., • Drive employee engagement through near-miss reporting, behavioral-based safety programs, and continuous improvement initiatives.Maintenance & Engineering Safety, • Ensure compliance with OSHA standards governing electrical safety, confined space entry, fall protection, hot work, machine safeguarding, and contractor management., • Administer Bloodborne Pathogen (BBP) training and exposure control plans where applicable., • Review contractor safety plans and oversee contractor onboarding and compliance activities., • Collaborate with Engineering and Maintenance teams to integrate safety requirements into preventive and predictive maintenance programs., • Oversee life-safety inspections and compliance programs for fire suppression systems, emergency eyewash stations, emergency lighting, boilers, pressure vessels, and related infrastructure.Fleet Safety & Transportation Compliance, • Develop and manage a comprehensive fleet safety program covering route service representatives, delivery drivers, transportation personnel, and company-owned vehicles., • Administer driver qualification programs, MVR review processes, defensive driving training, and driver coaching initiatives., • Ensure compliance with applicable FMCSA and DOT regulations including:, • Driver Qualification Files, • Drug & Alcohol Testing Programs, • Electronic Logging Device (ELD) Requirements, • Driver Vehicle Inspection Reports (DVIRs), • Hours of Service Compliance, • Investigate vehicle accidents and near-misses while utilizing telematics and camera systems to identify coaching opportunities and reduce risk.Training & Safety Culture, • Design, implement, and maintain company-wide EHS training programs., • Lead OSHA compliance training initiatives including:, • OSHA 10/30, • Hazard Communication (GHS), • Lockout/Tagout, • Forklift Safety, • Confined Space Entry, • Fall Protection, • First Aid/CPR/AED, • Emergency Response Procedures, • Develop onboarding safety orientation programs for all new employees., • Lead safety committees and mentor site-level safety champions throughout the organization., • Promote a culture where safety is recognized as a core value and business priority.Incident Management & Regulatory Reporting, • Manage company-wide incident reporting, investigation, and recordkeeping systems., • Maintain OSHA 300 and 300A logs and ensure compliance with all reporting requirements., • Conduct root cause investigations utilizing methodologies such as 5-Why Analysis, SCAT, and Fault Tree Analysis., • Partner with Human Resources to manage workers’ compensation claims, return-to-work programs, and injury prevention initiatives., • Prepare and submit OSHA, EPA, DOT, Tier II, wastewater, and state regulatory reports accurately and on time.QualificationsEducation & Certifications Required • Bachelor’s degree in Occupational Safety, Environmental Science, Engineering, Industrial Hygiene, or a related field., • OSHA 30-Hour General Industry certification. Preferred • Certified Safety Professional (CSP), • Associate Safety Professional (ASP), • Certified Industrial Hygienist (CIH), • OSHA 510 or OSHA 511 certification, • DOT/FMCSA compliance certification, • First Aid/CPR Instructor certificationExperience, • 7-10 years of progressive EHS leadership experience in manufacturing, industrial laundry, textiles, distribution, logistics, or multi-site operations., • Experience managing fleet safety programs and DOT compliance., • Demonstrated success improving safety performance and reducing incident rates., • Experience leading OSHA, EPA, and DOT inspections and audits., • Prior experience supporting healthcare laundry accreditation standards is highly desirable.Knowledge, Skills & AbilitiesTravel: Up to 40% (multi-site travel required) Location: Corporate oversight of all Dempsey Uniform & Linen Supply facilities • Strong working knowledge of OSHA, EPA, FMCSA, DOT, and state regulatory requirements., • Understanding of industrial laundry operations, chemical handling systems, steam generation equipment, and production safety programs preferred., • Excellent analytical, organizational, communication, and leadership skills., • Ability to influence and engage employees at all levels of the organization., • Experience using EHS management software and Microsoft Office applications., • Valid driver’s license with an acceptable driving record.Dempsey Uniform is an EEO/Affirmative Action Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with ADA requirements. COMPANY DESCRIPTION Since its founding in 1959, Dempsey Uniform & Linen Supply has become a leading uniform and linen supplier in the Mid-Atlantic by maintaining its family ownership and continuously investing in its people and plant to stay ahead of the competition. At Dempsey Uniform & Linen Supply, you'll find uniforms, linens and floor mats that can be rented at a low weekly cost that includes weekly pick-up, cleaning and delivery. Our offering includes uniform services, restaurant linen services, towel services, medical linen services and facility services. Technology LeadershipDempsey is an innovator in our industry because we have always invested in opportune technologies for our business. Dempsey’s state-of-the-art processing facility in Jessup, PA opened to both local and industry acclaim for it's technology. Dempsey is committed to leveraging technologies that control our customers' costs and enhance their service experience. Financial StrengthDempsey has grown rapidly, yet responsibly, over the past five years. Through five strategic acquisitions, a well-developed management team, and excellent banking relationships, Dempsey has welcomed hundreds of new customers and enhanced existing customer relationships. Environmental LeadershipDempsey Uniform & Linen Supply is committed to a sustainable future through environmental stewardship and conservation of the earth's natural resources. Dempsey has become a leader in both the textile rental industry and our local community in preserving our environment. Continuity for Keeping PromisesThe Dempsey Difference is about our commitment to keeping promises. A commitment that extends to every single one of our employees, many of whom have spent most of their careers with us. As a result, the same people that make our promises will be there to fulfill them. It all makes for a really promising future. We hope you'll consider joining the Dempsey Family and continue our legacy of keeping promises. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAre you ready to join a growth-oriented team where creativity meets innovation? At Ware Malcomb, we are a dynamic and forward-thinking design firm committed to pushing the boundaries. Our team-oriented, collaborative approach ensures that every project is a blend of visionary design, seamless project delivery, and we are actively engaged with both the community and the industry. Discover our vibrant culture to get an inside look into life at Ware Malcomb and the programs we offer. https://waremalcomb.com/life-at-ware-malcomb/ The Civil Engineering Manager is a key member of the Ware Malcomb senior management team, responsible for the growth, revenue, profitability, staff management and overall client relationships for the North East civil engineering market. As Civil Engineering Manager, you will also be responsible for nurturing a positive, team-oriented environment, ensuring financial goals and deadlines are being met, assisting in business development and managing select projects. Ware Malcomb offers a great opportunity to lead a civil engineering practice, while benefiting from the platform, resources and support provided by an international, multidisciplinary design firm. Your Role • Prepare proposals and contracts for civil engineering projects, • Review of project revenue projections, monthly financial reports and monthly business reports, • Manages select projects, • Responsible for the growth and profitability of group, • Attend hearings and planning meetings, • Consistently market and promote getting new work for Ware Malcomb, • Attend relevant networking functions and set up regular meetings with clients, • Responsible for operations of the group, • Train, mentor and oversee the work of team members, • Responsible for recruiting and hiring new team members Qualifications, • 10+ years of civil engineering experience, specifically in the field of Land Development, • Experience at the Project Manager or Senior Project Manage level. Prior leadership experience preferred., • Experience developing and maintaining client relationships, • Professional Engineer (PE), • Bachelor's Degree in Civil EngineeringThe compensation range is $140k-$170k, plus benefits. Life at Ware MalcombThe final agreed upon compensation is based on individual education, qualifications, experience, licensing, project specialty/complexity and work location. We may exceed the posted compensation range for candidates who surpass the posted requirements. At Ware Malcomb, certain roles are bonus eligible. This is a full-time, long-term position. Established in 1972, Ware Malcomb is a dynamic, forward-thinking commercial real estate design firm providing professional architecture, interior design, civil engineering, branding, building measurement, structural engineering and MEP engineering services to clients throughout the world. With office locations throughout the United States, Canada, Mexico and Brazil, the firm specializes in the design of office, industrial, science & technology, healthcare, multifamily, retail, hospitality and public/institutional projects. The firm is also ranked among the top 10 Architecture/Engineering firms in Engineering News-Record’s Top 500 Design Firms and the Top 30 Interior Design Firms in Interior Design magazine’s Top 100 Giants. For more information, visit waremalcomb.com.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The Financial Reporting Manager is a critical role responsible for overseeing the company's financial reporting, external audit coordination, and accounting policy framework. This position serves as a key liaison between internal stakeholders and external auditors, ensuring the accuracy and timeliness of monthly, quarterly, and annual financial statements and Board reporting. The role requires strong technical accounting expertise, exceptional organizational skills to manage complex reporting calendars and deadlines, and a commitment to continuous process improvement and internal control compliance. The ideal candidate brings proven leadership capabilities in team development, a detail-oriented approach to financial close processes, and the ability to implement and maintain robust accounting policies that drive clarity and consistency across the organization. Primary Duties/Responsibilities: • Prepare / Review Monthly, Quarterly and Annual Reports to the Board of Directors and manage the internal review for these documents., • Prepare / Review quarterly and annual audited financial statements., • Create and maintain Monthly Closing Calendar to inform parties of necessary deadline adherence for the following processes: financial close, Board of Directors Package and monthly reporting to the parent company in Europe., • Manage communications with external auditors on external financial statements and accounting issues to ensure auditor agreement with company decisions on accounting and reporting disclosures and issues., • Assist in the coordination of annual audit and interim activities of external auditors., • Create, implement and maintain comprehensive accounting policy documents to improve clarity and consistency., • Implement and maintain reporting procedures to comply with internal control requirements., • Perform continuous assessment of the close process and process re-engineering to reduce the timing to close the financial period., • Support month end and year end closing., • Train and supervise two team members in the financial reporting group., • Assists in developing and implementing continued training for professional accounting team members., • Participate in other projects as required. Work Environment: • This is a hybrid position located in our Paramus, NJ office.Qualifications Education/Experience/Background: • Bachelor's degree or higher in Accounting., • CPA with at least 6+ years of experience with a Big 4 or national accounting firm, with heavy exposure to SEC, financial reporting and internal controls; or a combination of public accounting and industry experience. Knowledge/Skills/Abilities: • An excellent knowledge of US GAAP and IFRS rules and regulations is required combined with the ability to research and propose company positions on complex accounting issues., • Knowledge of regulated utilities accounting and ASC 980 is highly desirable., • Proven people management experience with demonstrated ability to lead, mentor, and develop accounting professionals., • Strong coaching and performance management skills with a track record of building high-performing teams., • Excellent interpersonal and communication skills to effectively collaborate across all levels of the organization., • Ability to delegate effectively while maintaining accountability for team deliverables., • Ability to work in a fast-paced environment and manage well through ambiguity and complexity., • Ability to execute and follow-through to completion and documentation., • Strategic thinking combined with hands-on execution capabilities., • Knowledge of PeopleSoft and Oracle FCCS consolidation system is a plus. Additional Information Pay Range: $125000 to $135000 Per Year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 15% Annual Performance Bonus. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Now Hiring: Electro-Mechanical Maintenance Specialist (Industrial Operations) We’re seeking a skilled Maintenance Technician to join our fast-paced, high-performing team. This is a full-time role with a typical schedule of 40+ hours per week, with opportunities for overtime. The position follows a 4-day workweek (four 10-hour shifts). What You’ll Do: In this hands-on role, you’ll be essential to keeping our industrial laundry operations running smoothly. You’ll maintain and service key equipment—including washers, dryers, ironers, conveyors, boilers, and air compressors. Using your knowledge of preventative maintenance and advanced troubleshooting, you’ll help reduce downtime, improve efficiency, and ensure our facility operates at peak performance. What You'll Do • Diagnose and repair: Troubleshoot electro-mechanical, pneumatic, and hydraulic systems; identify root causes and execute corrective repairs with minimal supervision., • Electrical work: Read and interpret schematics, ladder logic, and wiring diagrams; install and terminate control wiring up to 480V three-phase., • Preventive maintenance: Perform scheduled PM tasks on motors, drives, PLCs, conveyors, robotics, and automated assembly equipment per manufacturer and internal standards., • Documentation: Maintain accurate maintenance logs, work orders, and parts usage records in the CMMS (Computerized Maintenance Management System)., • Safety & compliance: Adhere to all OSHA, NFPA 70E, and site-specific lockout/tagout (LOTO) and arc flash procedures; participate in safety audits., • Continuous improvement: Identify recurring failure modes and recommend process or equipment modifications to reduce downtime and improve reliability., • Team support: Provide guidance and on-the-job training to Technician I team members; collaborate with engineering on capital projects and equipment commissioning., • Uphold equipment standards following manufacturer and company guidelines., • Engage in expansion, renovation, and cost-saving projects as needed., • Operate comfortably with pneumatic, steam, and hydraulic schematics., • Demonstrate proficiency in electronic and electrical capabilities., • Exhibit hands-on experience with PLCs, motors, and electrical circuits., • Understand pneumatics, compressed air systems, and hydraulic systems., • Navigate industrial-sized boilers and steam systems confidently., • Repair various pump styles (water and air)., • Operate forklifts and scissor lifts., • Tackle outdoor work, even in inclement weather., • Occasionally travel and work comfortably at heights.Qualifications, • Minimum 18 years old., • Associate degree or technical certificate in Electro-Mechanical Technology, Industrial Electronics, or related field, • 3–5 years of hands-on electro-mechanical maintenance experience in a manufacturing or industrial environment, • Demonstrated proficiency in AC/DC motor controls, variable frequency drives (VFDs), and control panels, • Experience with PLC-based systems and the ability to interpret ladder logic, • Proficiency reading electrical schematics, P&IDs, and mechanical drawings, • LOTO certification and NFPA 70E Electrical Safety awareness, • Ability to lift up to 50 lbs and work in varied conditions including heights and confined spacesBenefits, • Competitive hourly rate based off relatable skillset., • Great work schedules., • Enjoy paid time off, holidays, and comprehensive health, dental, and vision insurance., • Secure your future with a 401k featuring a generous company match., • Additional perks include company-paid life and disability insurance, provided uniforms, and exciting advancement opportunities., • Career advancement pathway to Technician III Pay based of skills and knowledge. Ready to elevate your career? Apply now and become an integral part of our dynamic team dedicated to excellence in maintenance! Your future starts here. Dempsey Uniform is an EEO/Affirmative Action Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with ADA requirements. COMPANY DESCRIPTION Since its founding in 1959, Dempsey Uniform & Linen Supply has become a leading uniform and linen supplier in the Mid-Atlantic by maintaining its family ownership and continuously investing in its people and plant to stay ahead of the competition. At Dempsey Uniform & Linen Supply, you'll find uniforms, linens and floor mats that can be rented at a low weekly cost that includes weekly pick-up, cleaning and delivery. Our offering includes uniform services, restaurant linen services, towel services, medical linen services and facility services. Technology LeadershipDempsey is an innovator in our industry because we have always invested in opportune technologies for our business. Dempsey’s state-of-the-art processing facility in Jessup, PA opened to both local and industry acclaim for it's technology. Dempsey is committed to leveraging technologies that control our customers' costs and enhance their service experience. Financial StrengthDempsey has grown rapidly, yet responsibly, over the past five years. Through five strategic acquisitions, a well-developed management team, and excellent banking relationships, Dempsey has welcomed hundreds of new customers and enhanced existing customer relationships. Environmental LeadershipDempsey Uniform & Linen Supply is committed to a sustainable future through environmental stewardship and conservation of the earth's natural resources. Dempsey has become a leader in both the textile rental industry and our local community in preserving our environment. Continuity for Keeping PromisesThe Dempsey Difference is about our commitment to keeping promises. A commitment that extends to every single one of our employees, many of whom have spent most of their careers with us. As a result, the same people that make our promises will be there to fulfill them. It all makes for a really promising future. We hope you'll consider joining the Dempsey Family and continue our legacy of keeping promises. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionAbout Thea Energy: Thea Energy is leveraging recent breakthroughs in stellarator physics and engineering to create a faster and simpler approach to commercializing fusion energy. The company is reinventing the stellarator using computer-controlled arrays of planar coils thereby replacing the intricate, complex modular magnets required in all other stellarator architectures. Thea Energy is on a mission to create a limitless source of zero emission energy for a sustainable future. Position Overview: Thea Energy is seeking highly skilled and motivated technicians to join our rapidly growing team. The Engineering Technician will be at the forefront of bringing our innovative designs to life. You will be responsible for hands-on fabrication, assembly, and testing of critical hardware including superconducting magnets, high vacuum and cryogenic equipment, electromechanical systems, and other associated hardware. You will be expected to work with a high degree of autonomy, troubleshoot complex problems, and contribute to the continuous improvement of our processes. If you are passionate about building cutting-edge technology and thrive in a fast-paced environment, we want to hear from you. Key Responsibility Areas: • Build, operate, maintain, and troubleshoot complex mechanical and electrical systems, • Assist in developing new equipment, tools, procedures, and inspection techniques to reduce production time while maintaining high quality, • Responsible for tool and workspace organization and maintenance, • Assemble and troubleshoot test articles and supporting test equipment, • Collaborate to support development of manufacturing processes and tooling Required Experience & Skillsets:, • High-school diploma or equivalent, • 5+ years of experience in shop fabrication, manufacturing, research, or high-tech industry, • 5+ years of technical experience with any of the following:mechanical or electrical systems, high pressure or high vacuum systems, cryogenic systems, plumbing, soldering, system testing, power or controls systems, • Comfortable working to aggressive deadlines and exceptional work ethic, • Proficiency with Microsoft Office suite tools or similar software Ideal Experience:, • Knowledge of quality control and inspection procedures, • Experience operating, maintaining, or troubleshooting or programming automation equipment, e.g. PLC, HMI, or process controllers, • Experience with reflow solder processes, including PCBA manufacturing, • Crane or lifting experience, • Forklift experience, • Experience with electrical schematic and wiring, • Experience using various types of hand tools and precision measuring tools, • Experience in documenting, improving, and implementing process instructions, • Experience with reading and reviewing mechanical drawings, • Experience with machining, operating manual milling, saws, and other toolsCompany Benefits:, • Hourly rate $30-43/hr, • Comprehensive health benefits (e.g. medical/dental/vision), • Employee equity stock options, • 20 days PTORequirements:, • Ability to occasionally lift up to 50 lbs., • Ability to perform activities such as typing, standing, or sitting for extended periods of time., • Willingness to occasionally travel or work required nights/weekends/on-call., • Ability to work in a facility that contains industrial hazards including heat, cold, noise, fumes, strong magnets, high voltage, high current, pressure systems, and cryogenics.It’s not necessary to meet all of the skillsets outlined above. Please feel free to send us a note and tell us why you would still be a great fit for this role or Thea Energy. Diversity and Inclusion: Thea Energy is an equal opportunity employer committed to creating a company of diverse backgrounds. By creating a diverse environment, we will bring new ideas and approaches to solving some of the world’s hardest (and most important) problems. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, family or marital status, age, disability, veteran’s status, or other characteristic protected by applicable laws and regulations. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job DescriptionAre you ready to join a growth-oriented team where creativity meets innovation? At Ware Malcomb, we are a dynamic and forward-thinking design firm committed to pushing the boundaries. Our team-oriented, collaborative approach ensures that every project is a blend of visionary design, seamless project delivery, and we are actively engaged with both the community and the industry. Discover our vibrant culture to get an inside look into life at Ware Malcomb and the programs we offer. https://waremalcomb.com/life-at-ware-malcomb/ As a Senior Project Manager at Ware Malcomb, you will deliver innovative design projects to diverse clients through all phases. You will lead internal and external teams, be financially responsible for projects by adhering to budgets and workplans and oversee the development of contract documents. As the primary client contact, your leadership and exceptional client service ensures project success.Your Role • Plan, schedule, conduct, and coordinate phases of the project (Typical: Conceptual, Schematic, Design Development, Construction Document, and Construction services)., • Preparation of project schedules., • Discusses their project health both administratively and technically with their operations leader., • Alerts the Business Operations Manager to any changing project conditions that need to be elevated to office leadership., • Maintains project planner for all phases of their projects and updates them each week to discuss during their weekly staffing meetings with studio leadership., • Issues add services and gets them approved in a timely manner prior to starting work on additional scope for any of their projects., • Utilize the company’s resource groups for design, preparation of design and construction documents. Provide construction services (Site visits, review shop drawings, etc.)., • Coordinates with the contracts team for the successful execution of the project contract., • Represent WM at required jurisdiction public design review or development approval meetings and project presentations when required., • Assembles the consultant team for the project (Identify scope of work, collect fees, select consultants, and facilitate contracts) as required., • Assists the studio leader and is a resource and mentor to junior project members within the office., • Assists in writing and reviewing proposals and the consultant team with the studio leader., • Coordinates with the accounting team regarding accounts receivable, consultants payable, and invoicing., • Coordinates the project consultants through all phases of the project., • Works with the QC studio, peer reviewer, or dedicated Project Architect to review all phases of the contract documents prior to issuance.Qualifications, • 10+ years of experience managing ground up commercial architecture projects, • Bachelor’s or Master’s degree in Architecture, or related field, • Licensed Architect or in the licensure process preferred, • AutoCAD and Revit skills, • Knowledge of Microsoft Project, Word, Excel, and Newforma, • Thorough knowledge of building codes, • Excellent verbal and written communication skills, • Ability to coordinate a complete set of contract documents The compensation range is $100k-$120k, plus benefits. Read more about Life at Ware Malcomb. The final agreed upon compensation is based on individual education, qualifications, experience, licensing, project specialty/complexity and work location. We may exceed the posted compensation range for candidates who surpass the posted requirements. At Ware Malcomb, certain roles are bonus eligible. Established in 1972, Ware Malcomb is a dynamic, forward-thinking commercial real estate design firm providing professional architecture, interior design, civil engineering, branding, building measurement, structural engineering and MEP engineering services to clients throughout the world. With office locations throughout the United States, Canada, Mexico and Brazil, the firm specializes in the design of office, industrial, science & technology, healthcare, multifamily, retail, hospitality and public/institutional projects. The firm is also ranked among the top 10 Architecture/Engineering firms in Engineering News-Record’s Top 500 Design Firms and the Top 30 Interior Design Firms in Interior Design magazine’s Top 100 Giants. For more information, visit waremalcomb.com.

Job Description The Dedicated Support Engineer is responsible for administering preventative maintenance (PM) and troubleshooting, calibrating, and performing electrical safety tests (EST) on automated equipment located in dedicated customer location. The ideal candidate is involved in all areas of the equipment technology, including monitoring work order requests, completing repairs, new equipment inspections and installations, PM’s, EST, inventory management, and documenting all service activities. The Dayshift Field Service Engineer will carry the following Key Accountabilites: • Perform tasks associated with the installation, maintenance, repair, troubleshooting, and assembly of automated microbiology equipment involving basic knowledge and abilities associated with the electronics, robotics, and mechanical processes., • Achieves performance measures associated with the maintenance of equipment, productivity, customer satisfaction, and other performance standards., • Complete all necessary documentation of activities involving the servicing of equipment in accordance with the manufacturer's requirements., • Serves as a resource for the proper operation and maintenance of equipment., • Instructs instrument operators in proper equipment use., • Adheres to the highest level of customer service while managing customer requests with diplomacy., • Provides technical support to customers by telephone as required., • Connects with customers through remote software to troubleshoot and resolve various technical issues. KEY COMPETENCIES: • Must reside in or around dedicated customers., • Must be reliable and able to work independently with limited supervision., • Excellent customer service expertise with outstanding communication skills., • Comfortable working in clinical environments with infectious agents and bio-hazards., • Computer literacy and the ability to read instrument schematics required., • Associate degree in Biomedical Equipment Technology, Industrial, Electrical, or Mechanical Engineering or minimum 2-3 years equivalent formal related training required., • Must be able to have manual dexterity to operate equipment and tools required on the job., • Must occasionally lift and/or move up to 50 lbs., • Must be able to occasionally crouch, kneel, and/or duck into tight spaces of the equipment., • Travel required (Approx. 10% or less) Company DescriptionBe a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.Be a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.

Job DescriptionAre you ready to join a growth-oriented team where creativity meets innovation? At Ware Malcomb, we are a dynamic and forward-thinking design firm committed to pushing the boundaries. Our team-oriented, collaborative approach ensures that every project is a blend of visionary design, seamless project delivery, and we are actively engaged with both the community and the industry. Discover our vibrant culture to get an inside look into life at Ware Malcomb and the programs we offer. https://waremalcomb.com/life-at-ware-malcomb/ As a Designer I at Ware Malcomb, you will support the Project Manager or Interior Designer in the delivery of innovative design projects. You will assist in multiple aspects of the architecture and interior design process, including but not limited to design and documentation across all project phases, preparation of materials and presentations, and support during construction administration activities. This position is ideal for entry-level or junior designers looking to deepen their industry knowledge and gain exposure to various stages of project execution while working under the guidance of experienced professionals. Your Role • Assist in AutoCAD and Revit support for the preparation of project documents, • Actively support compliance with Studio BIM/CAD project standards and procedures, • Assist in the production of graphics through use of 3D renderings and computer illustrations, • Assist in graphic formatting and mood boards for client presentations using Studio Templates, • Collaborate with team to suggest finishes, fixtures, and furniture for projects, • Support design, documentation, and assembly from Space Planning concept through the Construction, • Develop appropriate construction drawing techniques, • Coordinate specifications with drawings to meet project requirements, • Assist in the drafting of space planning concepts and creation of program documents, • Assist the Design lead in meetings with consultants, furniture dealers, product reps, and fabricators to meet overall project objectives, • Assist with submittals during the construction administration phase, • Communicate with industry partners and Ware Malcomb employees, • Assist with vendor interface and library resources and organization, • Actively support compliance with file and information storageQualifications, • 1+ years' experience in Interior Architecture & Design, • Bachelor's degree or technical degree/certificate in an accredited Interior Design, Architecture, or Interior Architecture related program, • Proficiency in Revit, AutoCAD, Adobe Suite, and Microsoft Office, • Excellent written and verbal communication skills, • Ability to create components of presentation packages, • Understanding what information will need to be presented to a client with the guidance of your supervisor, • Strong organizational and analytical skills, • Ability to provide efficient, timely, reliable and courteous service to customers, • Ability to read and interpret construction drawings, • Ability to work with your team members to solve problems involving multiple options, • Requires basic knowledge of financial terms and principles, • Understanding and application of design principles, theories, color and materials The compensation range is $25-$30/hr, plus benefits. Read more about Life at Ware Malcomb. The final agreed upon compensation is based on individual education, qualifications, experience, licensing, project specialty/complexity and work location. We may exceed the posted compensation range for candidates who surpass the posted requirements. At Ware Malcomb, certain roles are bonus eligible. This is a full-time, long-term position. Established in 1972, Ware Malcomb is a dynamic, forward-thinking commercial real estate design firm providing professional architecture, interior design, civil engineering, branding, building measurement, structural engineering and MEP engineering services to clients throughout the world. With office locations throughout the United States, Canada, Mexico and Brazil, the firm specializes in the design of office, industrial, science & technology, healthcare, multifamily, retail, hospitality and public/institutional projects. The firm is also ranked among the top 10 Architecture/Engineering firms in Engineering News-Record’s Top 500 Design Firms and the Top 30 Interior Design Firms in Interior Design magazine’s Top 100 Giants. For more information, visit waremalcomb.com.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The Senior Financial Data Analyst partners with the Director of Finance, Senior Leaders, and Finance Team to assist with automating processes and reporting, Collaborates closely with Operation Leaders to support strategic initiatives and decision-making, create financial models to provide insights to business operations, analyze and resolve data issues within the newly implemented systems, ensuring smooth operations, develop and maintain insightful financial dashboards and reports using advanced business intelligence tools and apply data mining techniques and visualization tools to support strategic planning, cost transparency, and operational efficiency. Primary Duties/Responsibilities: • The NJ Regulated finance team delivers operational support and education to a 500+ employee organization that delivers continuous clean drinking water for over 1 million customers within NJ. This role provides a dynamic learning environment to understand regulatory, customer, operational, and financial needs. In this role, you will directly work with operations leaders with the Finance Team. This collaborative team effort covers the core topics of FP&A, regulatory reporting, financial/AP controls, and operational KPIs. This stable team is highly motivated and empowered for new ideas and improvements; while also highly encouraging cross function education. As an employee you will find a balance between routine, self-led projects, and accessible leadership. Beyond a curious mind and strong financial data skills, a successful candidate will have a high desire to learn the operations, tinker and improve, challenge and execute., • Deliver FP&A support to Director of Finance, Manager, and Finance Team:, • Collaborate with monthly reporting, variance analysis, budget, and forecast deliverables., • Support month end close processes including accruals, AP, inventory, and reclasses., • Update annual allocations, capitalization, regulatory reports, and financial contractual obligations., • Leverage tools to provide a high level of data proficiency and analytical skills:, • Query, scrub, and manage data to provide transparency and insights., • Redevelop and automate existing reporting., • Monitor and create controls to drive the financial performance, accounting rules, state/federal regulatory compliance, and contractual agreements., • Strategic member for monthly Key Performance Indicators Leadership Review (partner in development, presentations, and strategy).Qualifications Education/Experience/Background: • Bachelor degree in Finance, Economics, Statistics, Engineering, a related field, or equivalent practical experience., • MBA preferred., • 3-5 years of progressive experience in Finance, Accounting, and/or Data., • Significant achievements in analyzing complex financial issues., • KPI or data science experience. Knowledge/Skills/Abilities: • Mastery of Excel and Google (or equivalent business intelligence data tools)., • Desire to learn about the Water Industry., • Strong analytical and problem-solving skills that translate to operational effectiveness., • High sense of urgency and ability to deliver on tasks and projects. Ability to identify creative solutions and to individually execute as a sole contributor., • Highly proficient with Google, Microsoft Office Suite, or equivalent system., • Highly effective management of data, data scrubbing, and data visualization (SQL/Power Query/Looker/ basics preferred)., • Integrity, reliability and autonomy., • Peoplesoft, Hyperion, Perspectives, Workday, SmartView knowledge are highly desirable., • Interpersonal skills with ability to interact with all levels of management. Additional Information Pay Range: $80000 to $90000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionAre you ready to join a growth-oriented team where creativity meets innovation? At Ware Malcomb, we are a dynamic and forward-thinking design firm committed to pushing the boundaries. Our team-oriented, collaborative approach ensures that every project is a blend of visionary design, seamless project delivery, and we are actively engaged with both the community and the industry. Discover our vibrant culture to get an inside look into life at Ware Malcomb and the programs we offer. https://waremalcomb.com/life-at-ware-malcomb/ As a Project Manager at Ware Malcomb, you will deliver innovative interior design projects from initial concept to construction. You will lead internal and external teams, be financially responsible for projects by adhering to budgets and workplans and oversee the development of contract documents. As the primary client contact, your leadership and exceptional client service ensures project success.Your Role • Plan, schedule, conduct, and coordinate all phases of the project, including conceptual, schematic, design development, construction documents, and construction services, while maintaining a strong design vision from concept through construction in collaboration with the Studio Manager., • Serve as the primary point of contact for clients, landlords, consultants, and internal teams throughout the duration of the project., • Coordinate directly with landlords, property management teams, and consultants to review building standards, approvals, and project requirements., • Conduct site visits, field surveys, and construction site observations as required to support project development and execution., • Guide and mentor junior team members in the preparation of test fits, design presentations, and construction documents, ensuring quality and accuracy across deliverables., • Work closely with junior staff to develop drawing sets and maintain alignment with project timelines and design intent., • Prepare and maintain project schedules, staffing plans, and weekly project planners, and collaborate with the Studio Manager to allocate team resources., • Discuss project health, both administratively and technically, with operations leadership and escalate changing project conditions to the Business Operations Manager as needed., • Lead consultant coordination, including assembling the team, defining scope, collecting fees, facilitating contracts, and managing consultants through all phases of the project., • Utilize Ware Malcomb’s resource groups for design and documentation and coordinate with QC teams and peer reviewers to review contract documents prior to issuance., • Coordinate with the contracts team for the successful execution of project agreements and issue additional services for approval prior to initiating out-of-scope work., • Support financial management by coordinating with the accounting team on accounts receivable, consultant payables, and invoicing., • Represent Ware Malcomb at jurisdictional design reviews, development approval meetings, and client presentations as required., • Assist studio leadership with proposals, consultant coordination, and marketing efforts for new and repeat business.Qualifications, • 7+ years of experience in the field of Interior Design or Architecture, • Diverse project experience, including workplace, retail or other commercial, • Bachelor’s or Master’s degree in Architecture or Interior Design, • NCIDQ or ARIDO preferred, • AutoCAD and Revit skills, • Knowledge of Microsoft Project, Word, Excel, and Newforma, • Thorough knowledge of building codes, • Excellent verbal and written communication skills, • Ability to coordinate a complete set of contract documents The compensation range is $90k-$105k, plus benefits. Read more about Life at Ware Malcomb. The final agreed upon compensation is based on individual education, qualifications, experience, licensing, project specialty/complexity and work location. We may exceed the posted compensation range for candidates who surpass the posted requirements. At Ware Malcomb, certain roles are bonus eligible. This is a full-time, long-term position. Established in 1972, Ware Malcomb is a dynamic, forward-thinking commercial real estate design firm providing professional architecture, interior design, civil engineering, branding, building measurement, structural engineering and MEP engineering services to clients throughout the world. With office locations throughout the United States, Canada, Mexico and Brazil, the firm specializes in the design of office, industrial, science & technology, healthcare, multifamily, retail, hospitality and public/institutional projects. The firm is also ranked among the top 10 Architecture/Engineering firms in Engineering News-Record’s Top 500 Design Firms and the Top 30 Interior Design Firms in Interior Design magazine’s Top 100 Giants. For more information, visit waremalcomb.com.

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: The Outside Sales Associate supports business development efforts by engaging new and existing customers, estimating projects, interpreting bid documents, and preparing proposals for building automation and mechanical solutions. This role builds relationships within the territory, collaborates closely with sales leadership, and develops technical and sales expertise through hands-on training and field experience. Responsibilities: • Interface with new and existing clients, • Define project requirements, estimate projects, build relationships, gather leads from established business partners, set appointments and recommend optimal Bosch Building solutions, • Interpret bid drawings and requirements, estimate project costs and write proposals, • .Work both independently and cooperatively within your designated area to close sales, secure business, and meet sales targets, • Develop skills required to understand sales strategy focused on decision-makers and business owners to establish a network and gain new business and expand relationships, • Collaborate daily with manager and team counterparts, • Participate in ongoing training, development, and mentoring, • Other duties as assigned. Required Qualifications: • Understanding of HVAC / controls / mechanical systems., • A positive Self-Starter attitude, • Good communication and people skills, • An ability to overcome obstacles and find solutions, • A commitment to ongoing learning to build upon past methods is essential Preferred Qualifications: • While an engineering degree is not essential, understanding of mechanical and/or BMS systems is preferred, and/or military experience, • 1-2 years of previous work experience or internships in Retail, Marketing, Business Development, Engineering, Technical Sales, or comparable fields are also preferred Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers, • Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment, • Sitting, standing, walking in office environments and construction sites, • The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate, • Will be required to be on site with customers or contractors, with or without BBT colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction., • Driving to customer sites is required, • Limited overnight travel may be required Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email talentacquisitionteam@climatec.com. Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: Responsible for driving new business and growing key accounts across the assigned territory through strategic prospecting, relationship building, and technical solution selling. Develop and execute sales plans, interpret plans and specifications to build accurate estimates, and partner with internal engineering and operations teams to deliver BAS/BMS solutions that meet customer needs. Responsibilities: • Develop and execute a strategic sales plan to achieve sales targets and expand the customer base., • Conduct regular visits to clients and prospects to build relationships and understand their needs., • Interpret plans and specifications and develop estimates, • Present and demonstrate products and services to potential clients, highlighting their benefits and value., • Collaborate with internal teams to ensure timely delivery of products and services to clients., • Maintain accurate records of sales activities, customer interactions, and market feedback in the CRM system., • Identify new business opportunities and develop sales strategies, • Other duties as assigned. Required Qualifications: • Bachelor's degree in Mechanical Engineering, a related field or equivalent industry experience, • 2+ years of experience in outside sales in the building automation industry., • Strong understanding of sales principles and customer relationship management., • Ability to interpret plans & specifications and estimate projects., • Excellent communication and interpersonal skills., • An established network in the construction and facility management fields in the NY / NJ or Northeast area, • Experienced in working independently and managing time effectively., • Proven track record of strategic sales and sales territory management, • Valid driver's license and willingness to travel within the assigned territory. Preferred Qualifications: • 5+ years of experience with Building Automation Systems (BAS) or related technologies., • Familiarity with CRM software and sales analytics tools., • Demonstrated ability to close sales and meet or exceed targets., • Network of contacts within the construction industry., • Experience with Tridium Niagara-based control systems Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers, • Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment, • Sitting, standing, walking in office environments and construction sites, • The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate, • Will be required to be on site with customers or contractors, with or without BBT colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction., • Driving to customer sites is required, • Limited overnight travel may be required Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email talentacquisitionteam@climatec.com. Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description The Graveyard Dedicated Support Engineer is responsible for administering preventative maintenance (PM) and troubleshooting, calibrating, and performing electrical safety tests (EST) on automated equipment located in dedicated customer location. The ideal candidate is involved in all areas of the equipment technology, including monitoring work order requests, completing repairs, new equipment inspections and installations, PM’s, EST, inventory management, and documenting all service activities. The Dedidcated Field Service Engineer will be required of the follwoign KEY ACCOUNTABILITES: • Perform tasks associated with the installation, maintenance, repair, troubleshooting, and assembly of automated microbiology equipment involving basic knowledge and abilities associated with the electronics, robotics, and mechanical processes., • Achieves performance measures associated with the maintenance of equipment, productivity, customer satisfaction, and other performance standards., • Complete all necessary documentation of activities involving the servicing of equipment in accordance with the manufacturer's requirements., • Serves as a resource for the proper operation and maintenance of equipment., • Instructs instrument operators in proper equipment use., • Adheres to the highest level of customer service while managing customer requests with diplomacy., • Provides technical support to customers by telephone as required., • Connects with customers through remote software to troubleshoot and resolve various technical issues. KEY COMPETENCIES: • The desire to work in a nightshift setting ., • Must reside in or around dedicated customers., • Must be reliable and able to work independently with limited supervision., • Excellent customer service expertise with outstanding communication skills., • Comfortable working in clinical environments with infectious agents and bio-hazards., • Computer literacy and the ability to read instrument schematics required., • Associate degree in Biomedical Equipment Technology, Industrial, Electrical, or Mechanical Engineering or minimum 2-3 years equivalent formal related training required., • Must be able to have manual dexterity to operate equipment and tools required on the job., • Must occasionally lift and/or move up to 50 lbs., • Must be able to occasionally crouch, kneel, and/or duck into tight spaces of the equipment., • Travel required (Approx. 10% or less).Company DescriptionBe a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.Be a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.

Job Description Position Overview The Plant Engineer will be responsible for implementing and sustaining automation technologies, supporting high-speed packaging operations, coordinating engineering projects, and partnering closely with maintenance and production teams to achieve performance, safety, and quality objectives. Essential Duties & Responsibilities Automation & Controls Engineering • Develop, maintain, and optimize controls systems to support production and packaging operations., • Program and troubleshoot Allen-Bradley PLCs, including RSLogix 5000 / Studio 5000., • Support, configure, and enhance FactoryTalk HMI/SCADA platforms., • Analyze system performance and implement control system improvements to enhance operational reliability., • Provide technical support for equipment commissioning, upgrades, and automation projects. Maintenance & Operational Support • Provide advanced technical expertise to maintenance personnel in diagnosing and correcting electrical, mechanical, and controls-related issues., • Support preventive and predictive maintenance programs to improve equipment uptime and reduce unplanned downtime., • Participate in root cause analyses and develop sustainable corrective actions. Project Management • Manage engineering and automation projects from concept through implementation, including scoping, budgeting, planning, and execution., • Coordinate with internal stakeholders, contractors, and vendors to ensure timely project completion., • Maintain proper documentation and ensure compliance with corporate, regulatory, and safety requirements. Systems, Data, and Technology Integration • Utilize SQL to extract data, analyze trends, and support system integrations., • Experience with Ignition SCADA is considered a strong asset., • Support data-driven decision-making and digital transformation initiatives within the facility. Compliance & Safety • Ensure adherence to all food safety, OSHA, regulatory, and company standards., • Support audits, documentation reviews, and engineering change management processes., • Promote and maintain a safe working environment through proactive risk assessments and compliance efforts. Qualifications Required Qualifications • Bachelor’s degree in Electrical Engineering, Mechanical Engineering, Industrial Engineering, or a related technical discipline., • Minimum of 5 years of experience in automation, plant engineering, or manufacturing engineering., • Proficiency with PLC programming (Allen-Bradley / RSLogix 5000 / Studio 5000)., • Experience with Rockwell FactoryTalk HMI/SCADA systems., • Demonstrated experience in maintenance management or supporting maintenance operations., • Strong communication skills (written and verbal) with the ability to partner effectively across departments., • Proven ability to lead and manage engineering projects. Preferred Qualifications • Experience in food manufacturing or regulated production environments., • Knowledge of high-speed packaging equipment., • Experience working with SQL databases., • Exposure to Ignition SCADA platforms., • Familiarity with Lean Manufacturing, Six Sigma, or similar continuous improvement methodologies. Key Competencies • Strong analytical, diagnostic, and problem‐solving skills, • Detail-oriented with a hands-on approach, • Ability to manage multiple priorities effectively, • Strong leadership and cross-functional collaboration skills, • Commitment to safety, quality, and operational excellence

Job Description Senior Electrical Designer - MA, PA (Hybrid) Who we are! Vanderweil Engineers is a nationally recognized, top-ranked engineering firm specializing in MEP/FP and technology services. For over 75 years, we've delivered innovative solutions across diverse sectors—including Science & Technology, Mission Critical, Academic, Healthcare, and Commercial. As one of the largest independently owned engineering firms in the U.S., our team of 500+ professionals operates from nine offices nationwide, bringing deep expertise and a commitment to excellence to every project. If you are looking for an opportunity to grow your career with some of the best minds in the industry, we are looking for you. We offer growth and stability in an ever-changing volatile environment. We are looking for a Senior Electrical Designer in our Power group. Our Power Department is leading the future of the energy and utility generation industry, focused on combined heat and power, alternative fuels like biogas and hydrogen, fuel cells, and battery storage, among many other cutting-edge technologies. Responsibilities include the following: • Produce drawings and design of electrical systems for heavy industrial projects such as cogeneration power plants, central heating and cooling plants, renewable energy systems and large chillers and boilers., • Must have general understanding of medium voltage and low voltage electrical distribution systems including switchgear, switchboards, motor control centers, panelboards, generators, and transformers., • Should be capable of designing switchgear, relaying & metering diagrams, lighting, raceways, grounding systems, and lightning protection systems., • Investigation and interpreting manufactures data, set up of model views and sheets using corporate standard., • Perform design calculations including feeder and branch circuit sizing, protective device sizing and voltage drop for review by the Engineer of Record., • Coordinate routing of cable, and miscellaneous components with other trades., • Assuring tasks are complete, accurate and in accordance with good engineering practice., • Review project files for compliance with standards and procedures., • Ability to interpret one-line diagrams, AC three-line diagrams and DC elementary diagrams., • Design and layout systems, create drawings and wiring plans for installation., • Should have experience with physical design of conduits and cable trays., • Validate designs and prepare customer presentation materials., • Use the companies’ internal database to plan personnel and scheduling needs. Essential Skills & Requirements: • Associate degree or equivalent from a vocational training program or technical school., • 5 plus years’ experience desired., • Revit certification extremely required or capable of learning., • Familiarity with NEC and NESC is essential, IEEE desirable., • Experience using BIM360 Cloud Collaboration platform is a plus., • Good oral and written communication skills, • Motivated and self-sufficient, strong computer skills and detail-oriented perspectives., • Ability to work individually or in a team setting with strong interpersonal, problem solving and analytical skills., • Customer service perspective with the ability to communicate effectively with staff and clients., • Knowledge of MS Office products including Word, Excel, Outlook. Our Flexible & Hybrid Work Culture We know that work/life integration is important to our employees. Our hybrid work style allows team members to have flexibility while building their skills through in-person exposure to industry experts. We prioritize wellness with programs that support physical and behavioral health, and we’re proud to foster an equitable and inclusive workplace. Learn more about our culture at www.vanderweil.com. The total compensation that we expect to pay for this position is dependent on years of experience, licensure, education, geographic location, and project portfolio but expected to be in the $90,000.00 to $115,000.00 annually.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Spec, Manufacturing Engineer Job Code: 38727 Job Location: Clifton, NJ Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: Develops, implements and analyzes manufacturing engineering plans and projects and communicates them to internal and external customers. Defines, develops and transfers manufacturing and engineering tools, strategies and systems. Develops manufacturing strategies for specific products and processes. Actively participates with engineering project teams in order to coordinate the release of new products. Estimates and tracks manufacturing costs, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines. Maintains records and reporting systems for coordination of manufacturing operations. The candidate will perform a variety of engineering work in the development, improvement, and optimization of multiple processes and techniques, including circuit card assembly, standard module assembly, and electro-mechanical final assembly. The work will include improving and optimizing current processes, implementing new tooling, improving existing tooling, and creating robust technical documentation on existing processes and tooling. Essential Functions: • Implementing manufacturing standard work and best practices to improve operational metrics, • Translate drawing requirements into detailed work instructions for the assembly, integration, and testing of complex end-products, • Work with existing and legacy equipment, • Control and improve existing processes, • Perform failure analysis and risk mitigation, • Complete technical writing and training related tasks, • Coordinate with maintenance group for equipment upkeep and training, • Ability to obtain a US security clearance Qualifications: • Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Additional Skills: • Strong problem-solving and data analysis skills, • Electrical, Mechanical, or Industrial Engineering background preferred, • Experience with legacy tooling, code, and equipment, • Robust project management and technical writing skills, • Ability to communicate project status and risks to leadership team, • Expertise in making data driven decisions to improve and develop processes, • Experience using DFM, Six-Sigma and/or Lean Manufacturing Principles, • Experience using DMAIC process and associated tools In compliance with pay transparency requirements, the salary range for this role in New Jersey area is $82,500.00 - $153,000.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .