Industrial engineering technology jobs in Paterson, New JerseyCreate job alerts

Overview: Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the greater New York, New Jersey and Connecticut markets with a rail-served landfill in Ohio. IWS is committed to delivering high-quality waste, recycling and environmental services, while prioritizing the safety of our employees, customers and communities. We cater to a diverse range of industrial, medical and commercial/residential customers. Founded in 1998, IWS has grown over the years through acquisitions, many of which were family-owned businesses that remain a part of our team today. We’re proud to combine the resources of a large company with the values and care of a family-run business. Essential Job Summary:: The Senior Maintenance Manager is a senior field-execution leader responsible for overseeing multiple fleet maintenance locations within an assigned area. This role serves as the primary execution arm of the company’s Fleet Maintenance Department, ensuring that enterprise maintenance standards, KPIs, and financial controls are consistently deployed and sustained at the shop level. This position does not set enterprise maintenance strategy but is fully accountable for executing it—driving consistency, developing maintenance leaders, stabilizing underperforming locations, and ensuring fleet availability, safety compliance, and cost discipline across a complex, high-utilization refuse and heavy-duty fleet. Essential Job Functions: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned.: • Multi-Site Fleet Leadership, • Provide direct oversight and leadership to Maintenance Managers and Supervisors across multiple locations, • Ensure consistent execution of IWS maintenance standards, policies, and procedures, • Serve as the escalation point for complex operational, technical, and personnel issues, • Coach, mentor, and develop maintenance leadership talent to support succession planning, • Maintenance Execution & Reliability, • Ensure disciplined execution of preventive, predictive, and corrective maintenance programs, • Drive high asset availability and uptime across refuse trucks, tractors, trailers, roll-off, and support equipment, • Lead structured root cause analysis (RCA) for repeat failures, downtime assets, and cost outliers, • Enforce standardized repair practices, PM intervals, and inspection protocols, • KPI Ownership & Performance Management, • Own area-level maintenance KPIs, including but not limited to:, • -PM Efficiency, Labor Efficiency, Fleet Availability & Downtime, R&M Spend vs Budget, Backlog Aging & Work Order Management, DVIR Closure & Regulatory Compliance, • Conduct weekly and monthly performance reviews with Maintenance Managers, • Develop and execute corrective action plans for underperforming locations, • Ensure readiness and accuracy for Monthly Operating Reviews (MORs) and executive reporting, • Financial Stewardship, • Manage and control area-level maintenance spend within approved budgets, • Forecast labor, parts, and outside service costs with accuracy and discipline, • Identify cost-reduction opportunities without compromising safety or reliability, • Partner with Directors on capital recommendations based on asset condition and performance data, • CMMS & Process Discipline, • Enforce strict CMMS compliance across all assigned locations, • Ensure accuracy and completeness of:, • Work order notes, Labor hours, Parts usage & Equipment Status, • Audit work order quality and backlog health regularly, • Drive standard workflows and data discipline to support enterprise analytics, • Safety & Compliance, • Champion a safety-first culture across all maintenance locations, • Ensure compliance with OSHA, DOT, environmental regulations, and company policies, • Lead safety audits, inspections, and corrective actions, • Ensure adherence to LOTO, HECP, hot-work, and shop safety standards, • Maintain audit-ready documentation and regulatory records, • Vendor & Contractor Oversight, • Oversee execution of vendor, contractor, and OEM relationships at the area level, • Ensure vendor performance aligns with cost, quality, and turnaround expectations, • Support contract compliance and service-level adherence, • Partner with Procurement and Directors on supplier performance feedback Shedule: 6am to 5pm Monday through Friday alternating Saturday. Requirements and Qualifications:: • Minimum 7+ years of progressive fleet maintenance experience, including multi-site oversight, • Bachelor’s degree in Engineering, Industrial Technology, or related field (or equivalent experience), • Prior experience managing large, heavy-duty vehicle fleets (refuse, vocational, or similar), • Proven 5 years of leadership experience managing Maintenance Managers and/or Supervisors, • The Senior Maintenance Manager is expected to, • Operate with high ownership and accountability, • Lead with consistency, discipline, and professionalism, • Develop leaders—not just fix problems, • Serve as a stabilizing force during growth, acquisitions, and operational change, • Act as a trusted execution partner to Directors and Corporate Fleet Maintenance leadership, • Strong working knowledge of:, • Preventive maintenance programs, • Reliability and downtime reduction, • OSHA safety standards (LOTO, HECP, shop safety), • CMMS-driven maintenance operations, • Demonstrated ability to manage budgets, analyze performance data, and drive execution, • Advanced root cause problem-solving and analytical skills, • Strong communication, coaching, and leadership presence, • Experience in refuse, waste, recycling, or heavy vocational fleet environments, • Lean, Six Sigma, or reliability-focused certifications, • Familiarity with enterprise maintenance KPIs and executive reporting cadence Additional Information: This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice. Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Salary Range Minimum: USD $140,000.00/Yr. Salary Range Maximum: USD $175,000.00/Yr.

We are a full-service fire alarm & suppression supply and service company based in Riverdale, NJ for over 25 years. Our company is one of the largest fire protection companies offering high quality industrial and commercial fire protection systems and services. We are seeking a new Estimator to join our rapidly growing Estimating Team. In this role, you will include compiling any and all information needed to complete a takeoff, building a bill of material that best covers the scope of work, and generating comprehensive proposals that clearly state the scope of work covered in our pricing. As a member of the Estimating Team, you will consult with the Engineering department, Field engineers, Project Managers, and other Estimating Team members to discuss and formulate estimates and resolve issues and report directly to the Estimating Manager. The Estimator is responsible for the following: · Analyze blueprints, specifications, and technical documents to gain a thorough understanding of the project in order to prepare time, cost, materials, and labor estimates. · Partner collaboratively with cross-functional teams (design engineering, Productions, Sales, finance, etc.) to understand requirements and ensure alignment to scope, schedule, and budget. · Build a project Binder that consists of all documentation used to complete a take-off. · Generate a proposal that includes the labor and materials needed to cover the scope of work gained from a completed take-off. Why You Will Love Us: As part of the Specialized Fire & Security Estimating Team, you will be provided with the best tools for the job with the latest in computer technology and support. Our Estimators act with passion to use our collective skills and knowledge to create a better experience for each individual on the team. We pride ourselves as being the on the front lines when it comes to making sure we have a project completely covered for our clients, their clients, and for the entire Specialized Fire & Security family. Compensation details: 24-40 Hourly Wage PIfffcee6196b6-37820-35493074

Location US-NJ | US-PA Positions 1 Experience (Years) 5 Category Sales At a Glance Legrand has an exciting opportunity for a Specification Consultant to join the Electrical Wiring Systems Wiremold Team. This is a remote position in New Jersey or Pennsylvania. The Specification Consultant will establish, grow, and maintain a strong presence within the specification and contractor communities. Develop and maintain a project pipeline reflective of market opportunities. Increase awareness among all relevant stakeholders on the value of the company's complete electrical and data communication infrastructure systems and solutions. The successful candidate is accountable for meeting and exceeding territory quota. What Will You Do? Main Activities: Organization: Individual Contributor competency model. • Main Interface: Develop and maintain a network of internal and external customers including the complete architecture and engineering design community, contractors and end users (Key Legrand vertical markets)., • Budget: Accountable for meeting and exceeding territory quota. Weekly expense management. Main Job Duties: • Write and secure LNA product specifications with key specification influences., • Establish relationships at A & E Firms through., • Design Assistance, • Implementing Legrand Master Spec, • Continuing Education Seminars, • Establish relationships with key stakeholders at electrical contractors., • Design Assistance, • Legrand Solution Training, • Project Management, • Establish relationships with major End Users in key verticals., • Collaborate with entire sales force within the Legrand family., • Support local sales team in their efforts at targeted distribution partners. This may include assistance with business reviews, training, and trade shows., • Maximize the sales tools, including daily usage of CRM software. Fully understand and utilize training and materials provided to support sales activities. Optimize time and territory management., • Performs other similar and related duties as required. Required Skills Education: • Bachelor's degree or equivalent construction industry experience. Experience: • Minimum 5 years of sales and/or marketing excellence or 10 plus years experience in one of the following industries or disciplines: electrical, communications, construction, A/V technology, engineering, architecture, or interior design. Skills/Knowledge/Abilities: • Must be proficient in negotiation and influencing skills. Able to creatively demonstrate new product concepts using professional selling skills. Lead project teams through the Construction Sales Process., • Able to assist with the creation of specification documents including engineering drawings and submittals. Perform engineering and budgetary analysis including specification writing and take-off assistance. Partner with sales team for complete market penetration., • Strong computer skills, proficient with word processing, spreadsheet and presentation software, e-mail and meeting management software. Ability to use internet and web based resources efficiently and effectively., • Must be able to communicate effectively in one-on-one and group presentation situations. Establish and maintain positive relationships with customers and industry contacts. About Legrand Legrand is the global specialist in electrical and digital building infrastructures. Our comprehensive offering of solutions for residential, commercial, and data center markets makes us a benchmark for customers worldwide. We harness technological and societal trends with lasting impacts on buildings with the purpose of improving life by transforming the spaces where people live, work, and meet with electrical and digital infrastructures and connected solutions that are simple, innovative, and sustainable. Legrand is a global, publicly traded company listed on the Euronext (Legrand SA EPA: LR). For more information, visit www.legrandgroup.com/en About Legrand North and Central America Legrand, North & Central America (LNCA) is a leader in the AV, Lighting & Controls, Electrical, and Data Center markets. LNCA offers comprehensive medical, dental, and vision coverage, as well as distinctive benefits like a high employer 401K match, paid time off (PTO) and holiday pay, short-term and long-term disability benefit plans, above-benchmark paid maternity and parental leave, bonus opportunities in accordance with the Company's incentive plans, paid time off to volunteer, and an active/growing Employee Resource Group network. For more information, visit legrand.us About Legrand's Electrical Wiring Systems Division Legrand's Electrical Wiring Systems (EWS) division provides the most complete line of residential, commercial, and industrial electrical wiring devices in the world. Through commitment to innovation and quality, EWS maintains the position of industry leader in wire and cable management and wiring devices categories, specializing in raceways, flexible floor, open space and outdoor power solutions, wire mesh cable trays and systems, and designer switches and outlets. With this comprehensive offering, EWS serves a range of exciting vertical markets, including commercial office and commercial interior, data centers, education, healthcare, hospitality, manufacturing, mixed-use developments and residential. For more information, visit legrand.us/electrical wiring devices http://www.legrand.us http://www.youtube.com/legrandna http://www.linkedin.com/company/44580 http://twitter.com/legrandNA Equal Opportunity Employer

Location US-NJ-Fairfield Positions 1 Category Manufacturing At a Glance Legrand has an exciting opportunity for a Sr. Manufacturing Engineer to join the Audio Video Division in Fairfield, NJ. The Sr. Manufacturing Engineer will provide day to day support on products being built in the manufacturing assembly area(s). This would include working with the assembly team in the identification of continuous improvement ideas that utilize lean manufacturing principles. These improvements would target processes and procedures that will enhance the quality and repeatability of the assembly process and increase productivity. What Will You Do? Identify process and assembly improvements and work with a senior engineer to implement improvement ideas into the manufacturing area using lean manufacturing principles • Provide troubleshooting support to the manufacturing floor, • Create and maintain manufacturing processes and procedures, • Provide input on the design of new product line assembly cells and implement their setup, • Provide process and procedural training to assembly personnel, • Participate in new product design reviews to identify design for manufacturability (DFM) issues and opportunities, • Review assembly documentation for accuracy through ECO reviews, • Work with packaging vendors to design custom packaging solution for high volume assemblies, • Design and implement assembly fixtures that will increase efficiencies on the manufacturing floor, • Provide Return on Investment (ROI) justification on capital expenditures, • Understand workplace hazards and take steps to proactively prevent and report hazards or injuries in the workplace. Cooperate in Safety Programs, initiatives, and investigations., • Demonstrate our five core values of Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment and Continuous Improvement Education and Experience: • Bachelor of Science degree in manufacturing, industrial or mechanical engineering or other related technical degree with a minimum of six (6) months engineering experience in a manufacturing environment; or combination of relevant education and experience, • 3D CAD work experience Required Knowledge, Skills and Abilities: • Excellent verbal and written communication skills, • Excellent troubleshooting and problem solving skills, • An understanding of lean manufacturing principles, • Ability to work in a team environment, • Proficient in the use of personal computers, internet and Microsoft Office suite of software including Word, Excel and Outlook (or related e-mail system), • Self-motivated with the ability to work with minimal supervision, • Excellent interpersonal skills, • Ability to interpret standards, specifications, procedures, drawings, etc., • Strong mechanical aptitude, • Ability to train and motivate employees at all levels, • Ability to make sound decisions within established guidelines, • Ability to demonstrate flexible and efficient time management and to appropriately prioritize workload based upon organization or department needs, • Be detail-oriented and have excellent follow-through skills, • Must possess high degree of professionalism, • Must be available for extended, varied work hours based on business need Preferred Knowledge, Skills and Abilities: • Experience with Solidworks, • Experience with SAP, • Labeling software experience, • Machine shop experience, • Multi-lingual (Spanish, Laotian, etc.) WORKING CONDITIONS/PHYSICAL DEMANDS: • While performing the duties of this job, the employee may be required to reach above shoulder level, reach below knee level, bend, stoop, squat/kneel, climb; and lift, push or pull 50 lbs. Must have the ability to make coordinated movements of the fingers and hands to grasp, manipulate, and to perform data entry on a keyboard., • Steel-toed shoes are required for working in this position, • Combination general office and regular shop assembly/distribution center environment (no air conditioning), • May require regular ground travel to other company facilities within local metropolitan area, • Long-distance or air travel as needed - not to exceed 5% travel About Legrand Legrand is the global specialist in electrical and digital building infrastructures. Our comprehensive offering of solutions for residential, commercial, and data center markets makes us a benchmark for customers worldwide. We harness technological and societal trends with lasting impacts on buildings with the purpose of improving life by transforming the spaces where people live, work, and meet with electrical and digital infrastructures and connected solutions that are simple, innovative, and sustainable. Legrand is a global, publicly traded company listed on the Euronext (Legrand SA EPA: LR). For more information, visit www.legrandgroup.com/en About Legrand North and Central America Legrand, North & Central America (LNCA) is a leader in the AV, Lighting & Controls, Electrical, and Data Center markets. LNCA offers comprehensive medical, dental, and vision coverage, as well as distinctive benefits like a high employer 401K match, paid time off (PTO) and holiday pay, short-term and long-term disability benefit plans, above-benchmark paid maternity and parental leave, bonus opportunities in accordance with the Company's incentive plans, paid time off to volunteer, and an active/growing Employee Resource Group network. For more information, visit legrand.us About Legrand's Audio Video (AV) Division Legrand AV is a global leader in designing and manufacturing electrical, data, and AV solutions. For their customers worldwide, Legrand AV is focused on providing the foundation for amazing AV experiences through innovative solutions and exceptional service that solve their customers' AV integration and technology challenges. Today and tomorrow are about keeping people connected. Legrand and the AV industry are uniquely positioned to deliver just that. Legrand AV solutions support technology to rebuild and maintain vital connections around the world. The tenacity and determination to stay connected, no matter what it takes is proof that nothing will stop Legrand AV's pursuit for life. Despite the challenges, people have adapted and found ways to collaborate, to meet, to greet, to teach, to learn. http://www.legrand.us http://www.youtube.com/legrandna http://www.linkedin.com/company/44580 http://twitter.com/legrandNA Equal Opportunity Employer

Job Description Embedded Engineer (Microprocessors) We are seeking a seasoned Electrical Engineer, embedded engineer to design and program complex electrical systems. Responsibilities: • Engineered and designed microprocessor-based, mixed-signal circuit boards for specialized products, • Developed C language embedded software for servos, ensuring smooth interaction with external systems., • Led the construction and testing of prototype circuits, providing guidance to design and technical teams., • Authored comprehensive product documentation, including user instructions, project logs, test reports, and design evaluations., • Collaborated with Manufacturing to facilitate product commercialization, manage bills of materials, and develop documentation and test fixtures., • Provided engineering support for existing products to ensure optimal performance. Requirements: • A minimum of 8+ years of experience in electro-mechanical applications, • Strong theoretical background, • Proficiency in circuit board design, schematic generation, and PCB layout tools, • Expertise in open/closed-loop servo mechanisms, motor design, and inverter development., • Experience in power supply development and industrial process control., • Ability to multitask in a hands-on environment., • Proven ability to work effectively in team settings and independently., • Provides project management assistance for control systems as needed., • Microsoft Office products to perform engineering and project management tasks., • Ability to write routine reports and correspondence., • Effectively present information to top management, customers, and employees., • Apply mathematical operations to such tasks as determination of test reliability and validity, analysis of variance, correlation techniques, and factor analysis., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Close vision, and color vision ability required, • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, reaching, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination., • Work in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times. Qualifications: • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • Working in various environmental conditions, which may include exposure to varying temperatures, and noise levels at times Education: • B.S. in Electrical Engineering or B.S. in Electrical Engineering Technology or an equivalent degree or years of experience What we offer: • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching, mentoring helping team members realize their potential, aiding in defining goals and executing them., • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base & bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success., • Our goal as leaders is to provide value, value to our clients, vendors and more importantly to our team- YOU. Looking forward to getting to know you! We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job Description Experienced Inside Sales Engineer - Final Control Advance Your Engineering Career in Industrial Process Automation Control Associates is seeking an experienced Inside Sales Engineer to join our Final Control sales team. If you have 2-3 years of engineering or technical sales experience and want to apply your expertise in a dynamic, client-facing role with a 90+ year industry leader, this is your next career move. About Control Associates: For over 90 years, Control Associates has been setting new standards for industrial process automation across the New York tri-state area. As an Emerson partner, we deliver cutting-edge process automation systems, valves, measurement solutions, pressure management, asset reliability, and data management solutions to premier clients in Life Sciences, Natural Gas Distribution & Transmission, HVAC, Power, Chemical, and Downstream Hydrocarbons. Your Role and Impact: As an Experienced Inside Sales Engineer, you'll be the technical expert and primary inside contact for your account team, working directly with Account Managers and Sales Coordinators to deliver business success. You'll combine your engineering knowledge with customer relationship skills to solve complex process control challenges and drive sales growth. What You'll Do: • Manage internal customer account relationships for the sale of control valves, regulators, valve automation products, instrument & valve services, and process automation solutions, • Review customer specifications, technical requirements, and commercial terms to complete application engineering and generate accurate quotations, • Serve as the primary inside contact for your account team, responding to customer requests for quotations, technical information, and troubleshooting guidance, • Review customer purchase orders for compliance with quotations and resolve discrepancies professionally and efficiently, • Prepare comprehensive quotations and conduct proactive follow-up to drive sales success What You'll Bring: • Bachelor's degree in Engineering (Chemistry/Biology, Computer/Technology, or Mechanical preferred), • 2+ years of experience in engineering, operations, or sales within our served industries, • 2+ years of experience supporting clients within a sales organization or process, • Proven ability to prioritize, multitask, and troubleshoot customer deliverables with a drive to produce customer successes, • Demonstrated ability to collaborate effectively within a team environment to achieve business results, • Strong work ethic, professionalism, and genuine pride in both individual and team accomplishments, • Excellent communication, interpersonal, organizational, and time management skills, • Proficiency with Microsoft Office Suite, Advanced Excel, and CRM systems, • Customer-focused mindset with ability to build and maintain strong client relationships, • Problem-solving approach to technical and commercial challenges How This Role Embodies Our Core Values: Customer Focus: You'll prioritize client needs by delivering accurate, timely technical solutions that exceed expectations and build lasting relationships. Collaboration: You'll achieve superior results by working closely with Account Managers, Sales Coordinators, and technical teams to deliver seamless customer experiences. Innovation: You'll apply creative engineering thinking to develop solutions that address complex customer process control challenges. Integrity: You'll build trust through honest, transparent communication and delivering on commitments consistently. Passion: You'll bring enthusiasm, dedication, and strong work ethic to advancing your technical expertise while driving sales success. What We Offer: Competitive Compensation & Growth Potential Base salary of $70,000-$93,000 plus bonus potential that rewards your technical expertise and sales contributions. Comprehensive Health & Wellness Benefits Multiple medical plan options plus vision and dental coverage for you and your dependents. Additional benefits include flexible spending accounts, health savings accounts, commuter tax benefits, and company-paid long-term disability and life insurance. Work-Life Balance Generous paid time off including vacation days, holidays, and sick leave. Standard business hours Monday-Friday, 8 AM-5 PM. Secure Your Future 401(k) plan with company matching contributions, plus our Employee Stock Ownership Plan (ESOP) - giving you an ownership stake in Control Associates' success. Invest in Your Growth Comprehensive in-house and client/system-specific technical training to continuously advance your engineering expertise. Ready to Advance Your Engineering Career? If you're an engineering professional with 2-3 years of experience who combines technical expertise with a collaborative mindset, strong work ethic, and genuine drive to deliver customer success, we want to hear from you! Join Control Associates and take the next step in your career with a company that invests in your growth and rewards your passion for excellence. Location: Allendale, NJ (in-office, not remote) | Relocation to NYC tri-state area required if not currently local. Work visa sponsorship not available. Direct hire only. Control Associates is an Equal Opportunity Employer committed to diversity in the workplace. Control Associates participates in E-Verify. Click here to view E-Verify Participant You should be proficient in: • Retail Sales, • Service Advisor/Writer, • Recruiting, • Territory Sales, • Business-to-Consumer (B2C), • Tax Preparation

Job Description About the Firm We are a rapidly expanding, multi-disciplinary land development consulting firm providing civil engineering, traffic engineering, planning, and surveying services throughout the Northeast. Our Survey Department is an integral part of the organization, supporting a wide range of private and public sector clients on commercial, industrial, residential, and redevelopment projects. As our New Jersey operations continue to grow, we are seeking a Survey Project Manager to serve as the right-hand partner to the Survey Department Leader. This individual will help guide project delivery, manage clients, coordinate field and office staff, and contribute to the long-term advancement of the New Jersey survey practice. Position Overview The Survey Project Manager is responsible for overseeing survey projects from proposal through final deliverables, while ensuring technical excellence, schedule adherence, and client satisfaction. You will play a key operational role—supporting department leadership, managing workflows, providing technical review, mentoring staff, and ensuring field and office teams stay aligned. This is an ideal opportunity for someone seeking a long-term leadership path within a modern, growth-oriented surveying environment. Key Responsibilities • Project Management & Delivery, • Direct and manage boundary, topographic, ALTA/NSPS, right-of-way, as-built, and construction layout surveys, • Coordinate project schedules, staffing, and field/office workflows, • Perform QA/QC on survey calculations, CAD drawings, maps, plats, and legal descriptions, • Conduct and review deed research, boundary analysis, and record document evaluations, • Ensure deliverables meet quality standards and regulatory requirements Client & Stakeholder Coordination • Serve as a primary point of contact for clients, contractors, and internal teams, • Prepare proposals, scopes of work, budgets, and project timelines, • Maintain strong client relationships and support business development efforts, • Provide technical explanations and project updates in a clear, professional manner Leadership & Department Support • Work closely with the Survey Department Leader to manage daily operations within the NJ survey practice, • Mentor, train, and support Survey Technicians, Crew Chiefs, and CAD staff, • Assist with developing and improving workflows, technology adoption, and resource planning, • Promote a culture of safety, accuracy, professionalism, and collaboration Qualifications • Professional Land Surveyor (PLS) license preferred, • OR actively working toward licensure (SIT or in progress), • 7+ years of progressive land surveying experience (field and/or office), • Demonstrated experience managing survey projects and interacting directly with clients, • Strong understanding of boundary resolution, ALTA/NSPS standards, construction layout workflows, and topographic mapping, • Proficiency with AutoCAD Civil 3D or Carlson Survey, • Experience reviewing deeds, easements, plats, and record documents, • Strong organizational, communication, and leadership skills, • Ability to mentor junior staff and help guide field crews, • Self-directed problem solver with the ability to make sound decisions What the Firm Offers • Competitive salary + performance-based incentives, • Health, dental, and vision insurance, • 401(k) with employer match, • Paid time off and holidays, • Professional development and support for licensure, • A collaborative and supportive team culture, • Involvement in a diverse mix of land development projects

Job Description Electrical, Controls Engineer - Industrial Electro-Mechanical Machinery Industry Focus: Industrial Machinery I Electromechanical Equipment I Custom Automation Systems Robotics I Industrial Controls I Food and Beverage Manufacturing I Packaging Equipment I Water and Wastewater Treatment I Process Equipment I OEM Machine Building We are currently seeking to identify (2) Electrical Controls Engineers to join a well-established and growing industrial equipment manufacturer with over 50 years of engineering excellence. One opportunity is ideal for a junior to mid-level candidate with at least 2+ years of relevant experience, and the other is targeted for a senior-level engineer with more years of hands-on experience in electrical design, programming, controls, and industrial automation. This is your chance to join a team that builds large-scale electromechanical systems from concept through completion. From food production lines to custom process and water treatment equipment, you'll be working on machinery that makes a real-world impact. Responsibilities: · Design, develop, and program industrial electrical control systems to meet engineering and client requirements · Create electrical schematics, wiring diagrams, and panel layouts using AutoCAD Electrical or similar design software · Specify, select, and configure control system components such as PLCs, VFDs, relays, sensors, and breakers · Program PLCs and HMIs (Allen-Bradley, Siemens, or similar platforms preferred) · Layout and design control panels and motor control centers (MCCs) · Perform validation testing and troubleshoot electrical systems during build and final assembly · Collaborate closely with mechanical engineers, software engineers, and production teams to ensure full integration · Provide technical documentation including BOMs, manuals, wiring lists, and startup procedures · Travel as needed for commissioning and system validation (minimal and planned in advance) · Stay current with evolving industry technology, best practices, and safety standards Qualifications: We are hiring for two experience levels. Candidates must meet the criteria for one of the following profiles: Junior to Mid-Level Role: · Minimum 2 years of experience in electrical controls, panel design, or related engineering environment · Experience with AutoCAD Electrical or similar drafting tools · Working knowledge of industrial components and safety regulations · Basic PLC programming knowledge or exposure to automation software · Strong interest in hands-on engineering, testing, and troubleshooting · Bachelor's degree in Electrical Engineering or equivalent hands-on experience Senior-Level Role: · Experience in electrical controls and industrial automation · Proficiency in AutoCAD Electrical and strong PLC/HMI programming experience · Deep understanding of UL, NEC, NFPA 70E, and electrical safety standards · Demonstrated success leading projects or contributing to complex custom machinery builds · Ability to mentor junior team members and drive design improvements · Background in electromechanical system design and manufacturing support What Makes This Opportunity Unique: · Privately owned and financially strong company with over 50 years of proven success · All engineering and manufacturing is done in-house at our US-based facilities · Recession-resistant with projects in food processing, water treatment, packaging, and more · Work directly on high-impact custom systems from design to completion · Short lead times and an integrated design-build process · Access to a seasoned engineering team for mentorship and collaboration · Competitive salary structure with performance bonuses · Opportunities for growth into technical leadership or project management · Continued access to learning and development in electrical, automation, and mechanical engineering · Team-focused culture that values practical problem-solving, quality, and innovation Traits That Set You Up for Success: · Detail-oriented and self-driven with a strong sense of accountability · Hands-on mindset and curiosity to understand how systems work · Enjoy working on one-off and custom systems that challenge your engineering creativity · Collaborative and open communicator, ready to share and receive feedback · Willing to dive into troubleshooting and help bring machines across the finish line · Honest, reliable, and committed to continuous improvement Take the Next Step in Your Career: If you are passionate about industrial electrical systems and automation, whether you are building your skills or bringing a wealth of experience, we want to hear from you. These roles offer the chance to work on meaningful projects with a stable, growing company where your contributions matter every day. Apply now to explore how you can be a part of building the next generation of industrial automation and electromechanical systems. Equal Opportunity Commitment: We and our client are equal opportunity employers and welcome all qualified applicants regardless of race, religion, gender, age, disability, veteran status, or any other protected classification.

Job Description For decades, Dempsey Uniform & Linen Supply has been committed to delivering exceptional uniform, linen, and facility service solutions to healthcare, hospitality, industrial, and commercial customers throughout the Mid-Atlantic region. Our success is built on a culture of service, reliability, operational excellence, and a commitment to the safety and well-being of our employees. As we continue to grow, we are seeking a highly motivated and experienced Corporate EHS Manager to lead and strengthen our environmental, health, safety, and compliance programs across all company locations. Position Summary The Corporate EHS Manager is responsible for developing, implementing, and sustaining a comprehensive Environmental, Health & Safety program across all Dempsey facilities. This role provides strategic leadership and hands-on oversight of EHS compliance and safety culture for industrial laundry operations, maintenance functions, warehouses, distribution centers, and commercial vehicle fleets. The Corporate EHS Manager will partner closely with plant leadership, engineering, maintenance, transportation, and operations teams to create a proactive safety culture that protects employees, ensures regulatory compliance, supports operational excellence, and advances Dempsey’s commitment to quality and customer service. Key ResponsibilitiesCorporate EHS Leadership & Compliance • Develop, implement, and continuously improve a standardized corporate EHS management system across all Dempsey facilities., • Serve as the primary company representative for OSHA, EPA, DOT, local environmental agencies, and regulatory inspections., • Conduct facility audits, compliance inspections, hazard assessments, and risk evaluations while ensuring timely corrective action completion., • Establish and monitor leading and lagging safety indicators, providing monthly executive-level reporting and recommendations., • Manage environmental permitting, regulatory reporting, hazardous waste management, wastewater compliance, and environmental stewardship initiatives., • Develop, maintain, and test company-wide Disaster Recovery Plans (DRP), emergency response procedures, crisis communications, and business continuity protocols.Healthcare Laundry & Accreditation Compliance, • Lead and support compliance initiatives associated with Healthcare Laundry Accreditation Council (HLAC) standards and Hygienically Clean certification requirements., • Partner with Operations and Quality teams to ensure facilities maintain accreditation standards related to employee safety, infection prevention, quality assurance, and operational controls., • Support audit readiness and corrective action implementation associated with accreditation reviews.Production & Laundry Operations Safety, • Partner with plant leadership to identify and mitigate risks associated with industrial laundry processing, automated material handling systems, conveyors, finishing equipment, tunnel washers, dryers, boilers, and chemical dispensing systems., • Develop and maintain Job Hazard Analyses (JHAs), Safe Work Procedures (SWPs), and risk assessments for production operations., • Oversee Lockout/Tagout (LOTO), machine guarding, ergonomics, chemical handling, and noise exposure programs., • Lead Management of Change (MOC) reviews and Pre-Startup Safety Reviews (PSSR) for new equipment, facility expansions, and process modifications., • Drive employee engagement through near-miss reporting, behavioral-based safety programs, and continuous improvement initiatives.Maintenance & Engineering Safety, • Ensure compliance with OSHA standards governing electrical safety, confined space entry, fall protection, hot work, machine safeguarding, and contractor management., • Administer Bloodborne Pathogen (BBP) training and exposure control plans where applicable., • Review contractor safety plans and oversee contractor onboarding and compliance activities., • Collaborate with Engineering and Maintenance teams to integrate safety requirements into preventive and predictive maintenance programs., • Oversee life-safety inspections and compliance programs for fire suppression systems, emergency eyewash stations, emergency lighting, boilers, pressure vessels, and related infrastructure.Fleet Safety & Transportation Compliance, • Develop and manage a comprehensive fleet safety program covering route service representatives, delivery drivers, transportation personnel, and company-owned vehicles., • Administer driver qualification programs, MVR review processes, defensive driving training, and driver coaching initiatives., • Ensure compliance with applicable FMCSA and DOT regulations including:, • Driver Qualification Files, • Drug & Alcohol Testing Programs, • Electronic Logging Device (ELD) Requirements, • Driver Vehicle Inspection Reports (DVIRs), • Hours of Service Compliance, • Investigate vehicle accidents and near-misses while utilizing telematics and camera systems to identify coaching opportunities and reduce risk.Training & Safety Culture, • Design, implement, and maintain company-wide EHS training programs., • Lead OSHA compliance training initiatives including:, • OSHA 10/30, • Hazard Communication (GHS), • Lockout/Tagout, • Forklift Safety, • Confined Space Entry, • Fall Protection, • First Aid/CPR/AED, • Emergency Response Procedures, • Develop onboarding safety orientation programs for all new employees., • Lead safety committees and mentor site-level safety champions throughout the organization., • Promote a culture where safety is recognized as a core value and business priority.Incident Management & Regulatory Reporting, • Manage company-wide incident reporting, investigation, and recordkeeping systems., • Maintain OSHA 300 and 300A logs and ensure compliance with all reporting requirements., • Conduct root cause investigations utilizing methodologies such as 5-Why Analysis, SCAT, and Fault Tree Analysis., • Partner with Human Resources to manage workers’ compensation claims, return-to-work programs, and injury prevention initiatives., • Prepare and submit OSHA, EPA, DOT, Tier II, wastewater, and state regulatory reports accurately and on time.QualificationsEducation & Certifications Required • Bachelor’s degree in Occupational Safety, Environmental Science, Engineering, Industrial Hygiene, or a related field., • OSHA 30-Hour General Industry certification. Preferred • Certified Safety Professional (CSP), • Associate Safety Professional (ASP), • Certified Industrial Hygienist (CIH), • OSHA 510 or OSHA 511 certification, • DOT/FMCSA compliance certification, • First Aid/CPR Instructor certificationExperience, • 7-10 years of progressive EHS leadership experience in manufacturing, industrial laundry, textiles, distribution, logistics, or multi-site operations., • Experience managing fleet safety programs and DOT compliance., • Demonstrated success improving safety performance and reducing incident rates., • Experience leading OSHA, EPA, and DOT inspections and audits., • Prior experience supporting healthcare laundry accreditation standards is highly desirable.Knowledge, Skills & AbilitiesTravel: Up to 40% (multi-site travel required) Location: Corporate oversight of all Dempsey Uniform & Linen Supply facilities • Strong working knowledge of OSHA, EPA, FMCSA, DOT, and state regulatory requirements., • Understanding of industrial laundry operations, chemical handling systems, steam generation equipment, and production safety programs preferred., • Excellent analytical, organizational, communication, and leadership skills., • Ability to influence and engage employees at all levels of the organization., • Experience using EHS management software and Microsoft Office applications., • Valid driver’s license with an acceptable driving record.Dempsey Uniform is an EEO/Affirmative Action Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with ADA requirements. COMPANY DESCRIPTION Since its founding in 1959, Dempsey Uniform & Linen Supply has become a leading uniform and linen supplier in the Mid-Atlantic by maintaining its family ownership and continuously investing in its people and plant to stay ahead of the competition. At Dempsey Uniform & Linen Supply, you'll find uniforms, linens and floor mats that can be rented at a low weekly cost that includes weekly pick-up, cleaning and delivery. Our offering includes uniform services, restaurant linen services, towel services, medical linen services and facility services. Technology LeadershipDempsey is an innovator in our industry because we have always invested in opportune technologies for our business. Dempsey’s state-of-the-art processing facility in Jessup, PA opened to both local and industry acclaim for it's technology. Dempsey is committed to leveraging technologies that control our customers' costs and enhance their service experience. Financial StrengthDempsey has grown rapidly, yet responsibly, over the past five years. Through five strategic acquisitions, a well-developed management team, and excellent banking relationships, Dempsey has welcomed hundreds of new customers and enhanced existing customer relationships. Environmental LeadershipDempsey Uniform & Linen Supply is committed to a sustainable future through environmental stewardship and conservation of the earth's natural resources. Dempsey has become a leader in both the textile rental industry and our local community in preserving our environment. Continuity for Keeping PromisesThe Dempsey Difference is about our commitment to keeping promises. A commitment that extends to every single one of our employees, many of whom have spent most of their careers with us. As a result, the same people that make our promises will be there to fulfill them. It all makes for a really promising future. We hope you'll consider joining the Dempsey Family and continue our legacy of keeping promises. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The Financial Reporting Manager is a critical role responsible for overseeing the company's financial reporting, external audit coordination, and accounting policy framework. This position serves as a key liaison between internal stakeholders and external auditors, ensuring the accuracy and timeliness of monthly, quarterly, and annual financial statements and Board reporting. The role requires strong technical accounting expertise, exceptional organizational skills to manage complex reporting calendars and deadlines, and a commitment to continuous process improvement and internal control compliance. The ideal candidate brings proven leadership capabilities in team development, a detail-oriented approach to financial close processes, and the ability to implement and maintain robust accounting policies that drive clarity and consistency across the organization. Primary Duties/Responsibilities: • Prepare / Review Monthly, Quarterly and Annual Reports to the Board of Directors and manage the internal review for these documents., • Prepare / Review quarterly and annual audited financial statements., • Create and maintain Monthly Closing Calendar to inform parties of necessary deadline adherence for the following processes: financial close, Board of Directors Package and monthly reporting to the parent company in Europe., • Manage communications with external auditors on external financial statements and accounting issues to ensure auditor agreement with company decisions on accounting and reporting disclosures and issues., • Assist in the coordination of annual audit and interim activities of external auditors., • Create, implement and maintain comprehensive accounting policy documents to improve clarity and consistency., • Implement and maintain reporting procedures to comply with internal control requirements., • Perform continuous assessment of the close process and process re-engineering to reduce the timing to close the financial period., • Support month end and year end closing., • Train and supervise two team members in the financial reporting group., • Assists in developing and implementing continued training for professional accounting team members., • Participate in other projects as required. Work Environment: • This is a hybrid position located in our Paramus, NJ office.Qualifications Education/Experience/Background: • Bachelor's degree or higher in Accounting., • CPA with at least 6+ years of experience with a Big 4 or national accounting firm, with heavy exposure to SEC, financial reporting and internal controls; or a combination of public accounting and industry experience. Knowledge/Skills/Abilities: • An excellent knowledge of US GAAP and IFRS rules and regulations is required combined with the ability to research and propose company positions on complex accounting issues., • Knowledge of regulated utilities accounting and ASC 980 is highly desirable., • Proven people management experience with demonstrated ability to lead, mentor, and develop accounting professionals., • Strong coaching and performance management skills with a track record of building high-performing teams., • Excellent interpersonal and communication skills to effectively collaborate across all levels of the organization., • Ability to delegate effectively while maintaining accountability for team deliverables., • Ability to work in a fast-paced environment and manage well through ambiguity and complexity., • Ability to execute and follow-through to completion and documentation., • Strategic thinking combined with hands-on execution capabilities., • Knowledge of PeopleSoft and Oracle FCCS consolidation system is a plus. Additional Information Pay Range: $125000 to $135000 Per Year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 15% Annual Performance Bonus. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Now Hiring: Electro-Mechanical Maintenance Specialist (Industrial Operations) We’re seeking a skilled Maintenance Technician to join our fast-paced, high-performing team. This is a full-time role with a typical schedule of 40+ hours per week, with opportunities for overtime. The position follows a 4-day workweek (four 10-hour shifts). What You’ll Do: In this hands-on role, you’ll be essential to keeping our industrial laundry operations running smoothly. You’ll maintain and service key equipment—including washers, dryers, ironers, conveyors, boilers, and air compressors. Using your knowledge of preventative maintenance and advanced troubleshooting, you’ll help reduce downtime, improve efficiency, and ensure our facility operates at peak performance. What You'll Do • Diagnose and repair: Troubleshoot electro-mechanical, pneumatic, and hydraulic systems; identify root causes and execute corrective repairs with minimal supervision., • Electrical work: Read and interpret schematics, ladder logic, and wiring diagrams; install and terminate control wiring up to 480V three-phase., • Preventive maintenance: Perform scheduled PM tasks on motors, drives, PLCs, conveyors, robotics, and automated assembly equipment per manufacturer and internal standards., • Documentation: Maintain accurate maintenance logs, work orders, and parts usage records in the CMMS (Computerized Maintenance Management System)., • Safety & compliance: Adhere to all OSHA, NFPA 70E, and site-specific lockout/tagout (LOTO) and arc flash procedures; participate in safety audits., • Continuous improvement: Identify recurring failure modes and recommend process or equipment modifications to reduce downtime and improve reliability., • Team support: Provide guidance and on-the-job training to Technician I team members; collaborate with engineering on capital projects and equipment commissioning., • Uphold equipment standards following manufacturer and company guidelines., • Engage in expansion, renovation, and cost-saving projects as needed., • Operate comfortably with pneumatic, steam, and hydraulic schematics., • Demonstrate proficiency in electronic and electrical capabilities., • Exhibit hands-on experience with PLCs, motors, and electrical circuits., • Understand pneumatics, compressed air systems, and hydraulic systems., • Navigate industrial-sized boilers and steam systems confidently., • Repair various pump styles (water and air)., • Operate forklifts and scissor lifts., • Tackle outdoor work, even in inclement weather., • Occasionally travel and work comfortably at heights.Qualifications, • Minimum 18 years old., • Associate degree or technical certificate in Electro-Mechanical Technology, Industrial Electronics, or related field, • 3–5 years of hands-on electro-mechanical maintenance experience in a manufacturing or industrial environment, • Demonstrated proficiency in AC/DC motor controls, variable frequency drives (VFDs), and control panels, • Experience with PLC-based systems and the ability to interpret ladder logic, • Proficiency reading electrical schematics, P&IDs, and mechanical drawings, • LOTO certification and NFPA 70E Electrical Safety awareness, • Ability to lift up to 50 lbs and work in varied conditions including heights and confined spacesBenefits, • Competitive hourly rate based off relatable skillset., • Great work schedules., • Enjoy paid time off, holidays, and comprehensive health, dental, and vision insurance., • Secure your future with a 401k featuring a generous company match., • Additional perks include company-paid life and disability insurance, provided uniforms, and exciting advancement opportunities., • Career advancement pathway to Technician III Pay based of skills and knowledge. Ready to elevate your career? Apply now and become an integral part of our dynamic team dedicated to excellence in maintenance! Your future starts here. Dempsey Uniform is an EEO/Affirmative Action Employer and will make all employment-related decisions without regard to race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability or protected veteran status. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions in accordance with ADA requirements. COMPANY DESCRIPTION Since its founding in 1959, Dempsey Uniform & Linen Supply has become a leading uniform and linen supplier in the Mid-Atlantic by maintaining its family ownership and continuously investing in its people and plant to stay ahead of the competition. At Dempsey Uniform & Linen Supply, you'll find uniforms, linens and floor mats that can be rented at a low weekly cost that includes weekly pick-up, cleaning and delivery. Our offering includes uniform services, restaurant linen services, towel services, medical linen services and facility services. Technology LeadershipDempsey is an innovator in our industry because we have always invested in opportune technologies for our business. Dempsey’s state-of-the-art processing facility in Jessup, PA opened to both local and industry acclaim for it's technology. Dempsey is committed to leveraging technologies that control our customers' costs and enhance their service experience. Financial StrengthDempsey has grown rapidly, yet responsibly, over the past five years. Through five strategic acquisitions, a well-developed management team, and excellent banking relationships, Dempsey has welcomed hundreds of new customers and enhanced existing customer relationships. Environmental LeadershipDempsey Uniform & Linen Supply is committed to a sustainable future through environmental stewardship and conservation of the earth's natural resources. Dempsey has become a leader in both the textile rental industry and our local community in preserving our environment. Continuity for Keeping PromisesThe Dempsey Difference is about our commitment to keeping promises. A commitment that extends to every single one of our employees, many of whom have spent most of their careers with us. As a result, the same people that make our promises will be there to fulfill them. It all makes for a really promising future. We hope you'll consider joining the Dempsey Family and continue our legacy of keeping promises. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Company overview: Diversified Heat Transfer (DHT) is a leading engineering and manufacturing company of heat exchange equipment and systems for the residential, commercial, and industrial markets. With more than 80 years of experience, DHT designs, builds, and manufactures innovative, technology-driven products that provide flexible, high-quality, and cost-effective solutions for a wide variety of applications. Our continued growth and success means we’re always on the lookout for talented individuals to join our team. At DHT, we are committed to fostering a culturally diverse workforce where every individual is valued and respected. We believe that diversity drives innovation and creativity, and we are proud to be an equal opportunity employer. Position Overview: The Designer will collaborate with a cross-functional team to innovate and enhance our product line through the application of new technologies and design strategies. This role is pivotal in driving value by addressing customer and market needs and identifying effective approaches for product improvements and cost reductions. The Designer will support the design process for products, ensuring that all designs meet customer specifications, including design, functionality, material, and testing requirements, while adhering to established cost targets. Responsibilities: • Apply advanced design techniques and technologies to create innovative solutions and optimize product performance., • Prepare manufacturing drawings, documentation packages and specifications., • Research design options and perform experiments to determine feasibility, • Update and maintain history documentation., • Prepare bills of materials and costing., • Instrumental member of the ECO process and execution of enhancing existing product designs and engineering documentation, • Support in the creation of solid works 3D and 2D drawings for product offerings., • Ability to have a clear understanding of the department’s processes of building products (standard and customized)., • Participate in team meetings, create and maintain project timelines and action items through implementation. Qualifications: • Two year technology degree or equivalent with 5+ years of experience in Drafting/Design using Solid Works, • Proficiency in Solid Works is required., • Experience with PDM or similar Data Management systems is beneficial., • Experience/Knowledge of Design for manufacturing principles, • Excellent computer skills (MS Word, Excel, Outlook, ERP)., • Comfortable working with hand tools., • Product design experience., • Comfortable working in a fast-paced environment., • Knowledge of mechanical, electromechanical, hydraulic controls, machining operations, welding, and brazing., • Solid analytical skills are required., • Must work precisely, accurately, and with close attention to all details., • Strong organizational skills, with the ability to prioritize and manage multiple tasks simultaneously.

Job Description Lead the future of AI, HPC, and mission-critical infrastructure while working on some of the industry’s most advanced engineering and data center projects. Are you someone who thrives on solving complex engineering challenges, designing high-performance mechanical systems, and delivering innovative technical solutions? Do you enjoy working on mission-critical projects that support advanced AI, HPC, and data center environments? INTUVA by PTS Data Center Solutions, Inc is seeking a Senior Mechanical Engineer, to lead the design, coordination, and delivery of mechanical systems for highly complex infrastructure and mission-critical projects. You will be responsible for leading mechanical design efforts, collaborating across disciplines, supporting clients, and ensuring projects are executed with precision, compliance, and operational excellence. This position requires a disciplined, detail-oriented engineering professional who thrives in a fast-paced environment, takes ownership of deliverables, and consistently produces high-quality work. At PTS Data Center Solutions and INTUVA, you will work alongside industry leaders on advanced mission-critical infrastructure projects across North America. This is an opportunity to apply your engineering expertise, leadership, and technical judgment on projects that shape the future of technology while contributing to a growing organization built on innovation, This position is designed for an experienced client-facing engineer capable of leading complex mechanical engineering efforts for mission-critical facilities, AI infrastructure, high-density cooling systems, and advanced technology environments. Candidates with consulting engineering, design-build, or mission-critical project experience are strongly encouraged to apply. Become a key contributor to a growing organization where innovation, accountability, and teamwork drive success. ESSENTIAL DUTIES MAY INCLUDE: · Lead the design and coordination of mechanical systems including HVAC, piping, chilled water, hot water, steam, and controls systems for mission-critical, data center, commercial, industrial, and infrastructure projects. · Serve as Engineer of Record (EOR), providing signed and sealed engineering documents while ensuring all deliverables meet project specifications, budgets, schedules, and applicable code requirements. · Perform engineering calculations, equipment selections, load analysis, and system evaluations to deliver reliable, energy-efficient, and constructible engineering solutions. · Coordinate closely with clients, architects, engineers, contractors, vendors, and construction teams throughout design, construction, commissioning, and startup activities. · Participate in multidisciplinary coordination meetings, integrated design reviews, technical presentations, proposals, and client-facing discussions to support successful project delivery and business development efforts. · Mentor and support junior engineers while promoting technical excellence, collaboration, accountability, and adherence to engineering standards and company processes. · Maintain organized and accurate engineering documentation while ensuring all work is reviewed for accuracy, quality, consistency, and operational excellence. KNOWLEDGE, SKILLS, EXPERIENCE NEEDED: · Highly analytical and technically skilled engineer with strong communication abilities and commitment to engineering excellence · Disciplined, accountable, and collaborative professional who takes ownership of deliverables · Strong leadership capabilities and client-focused mindset · Ability to communicate technical concepts clearly to both technical and non-technical stakeholders · Solution-oriented and professional approach in fast-paced environments WHAT SUCCESS LOOKS LIKE: · Detail-Oriented & Analytical: Produces accurate, code-compliant engineering designs and technical solutions · Dependable & Accountable: Takes ownership of projects and consistently delivers high-quality work on schedule · Collaborative & Professional: Communicates effectively and works closely with clients, vendors, contractors, and internal teams · Innovative & Solution-Oriented: Solves complex engineering challenges while identifying opportunities to improve system performance and reliability Leadership Focused: Supports technical excellence through mentorship, teamwork, and strong engineering judgment REQUIRED: · Bachelor’s degree in Mechanical Engineering (BSME) (Required) · Active Professional Engineer (PE) License in at least one U.S. state (Required) · Ability to sign and seal engineering drawings and documents (Required) · NCEES Record in good standing preferred and strongly valued · Multi-state PE registrations highly preferred · 7+ years of mechanical design experience across a range of building types or mission-critical facilities · Expertise in ASHRAE standards, IMC, NFPA, and other applicable codes and standards · Proficiency with design and modeling tools (AutoCAD, Revit MEP, Trace 700, Energy Plus, or similar) · Strong client communication skills — ability to translate technical details into actionable solutions · Proven experience leading projects independently · Experience reviewing construction documents, RFIs, and submittals · Strong understanding of engineering coordination and construction processes PREFERRED: · Experience with data centers, mission-critical, industrial, or high-performance facility environments · Experience supporting AI, HPC, or high-density cooling infrastructure projects · Construction administration experience including RFIs, submittal reviews, and field coordination · Experience with commissioning, energy optimization, and fast-track/design-build project delivery environments WHY JOIN PTS DATA CENTER SOLUTIONS: · Work on innovative AI, HPC, and mission-critical infrastructure projects. · Be part of a fast-growing organization with a strong 25+ year industry track record. · Collaborate with highly respected engineering and operations professionals. · Opportunity for technical leadership, career advancement, and long-term growth. · Competitive compensation, performance incentives, hybrid flexibility, and comprehensive benefits. SCHEDULE & FLEXIBILITY: This is a hybrid role based in Oakland, NJ This position requires a high degree of flexibility. Candidates must be willing to adjust work hours as needed, including supporting project deadlines, commissioning activities, travel, client meetings, and changing project priorities. Travel is required depending on project assignments and client needs. Company DescriptionINTUVA by PTS Data Center Solutions, Inc. is a leader in designing, building, and supporting mission-critical infrastructure and technologies. Since 1998, PTS has evolved into a multi-division organization delivering services across data centers, energy, IT, cybersecurity, and advanced data services. Our teams support some of the world’s most demanding environments where uptime, reliability, innovation, and operational performance are critical. We specialize in engineering-driven solutions for mission-critical facilities, data centers, advanced energy systems, and next-generation infrastructure. At PTS and across its divisions, we are guided by core values of accountability, integrity, leadership, and continuous improvement, and we are committed to building long-term relationships with our employees, clients, and partners. We are building a team of professionals who are passionate about engineering excellence, problem-solving, innovation, and delivering meaningful results.INTUVA by PTS Data Center Solutions, Inc. is a leader in designing, building, and supporting mission-critical infrastructure and technologies. Since 1998, PTS has evolved into a multi-division organization delivering services across data centers, energy, IT, cybersecurity, and advanced data services.\r\nOur teams support some of the world’s most demanding environments where uptime, reliability, innovation, and operational performance are critical. We specialize in engineering-driven solutions for mission-critical facilities, data centers, advanced energy systems, and next-generation infrastructure.\r\nAt PTS and across its divisions, we are guided by core values of accountability, integrity, leadership, and continuous improvement, and we are committed to building long-term relationships with our employees, clients, and partners.\r\nWe are building a team of professionals who are passionate about engineering excellence, problem-solving, innovation, and delivering meaningful results.

Job Description Experienced Inside Sales Engineer - Final Control Advance Your Engineering Career in Industrial Process Automation Control Associates is seeking an experienced Inside Sales Engineer to join our Final Control sales team. If you have 2-3 years of engineering or technical sales experience and want to apply your expertise in a dynamic, client-facing role with a 90+ year industry leader, this is your next career move. About Control Associates: For over 90 years, Control Associates has been setting new standards for industrial process automation across the New York tri-state area. As an Emerson partner, we deliver cutting-edge process automation systems, valves, measurement solutions, pressure management, asset reliability, and data management solutions to premier clients in Life Sciences, Natural Gas Distribution & Transmission, HVAC, Power, Chemical, and Downstream Hydrocarbons. Your Role and Impact: As an Experienced Inside Sales Engineer, you'll be the technical expert and primary inside contact for your account team, working directly with Account Managers and Sales Coordinators to deliver business success. You'll combine your engineering knowledge with customer relationship skills to solve complex process control challenges and drive sales growth. What You'll Do: • Manage internal customer account relationships for the sale of control valves, regulators, valve automation products, instrument & valve services, and process automation solutions, • Review customer specifications, technical requirements, and commercial terms to complete application engineering and generate accurate quotations, • Serve as the primary inside contact for your account team, responding to customer requests for quotations, technical information, and troubleshooting guidance, • Review customer purchase orders for compliance with quotations and resolve discrepancies professionally and efficiently, • Prepare comprehensive quotations and conduct proactive follow-up to drive sales success What You'll Bring: • Bachelor's degree in Engineering (Chemistry/Biology, Computer/Technology, or Mechanical preferred), • 2+ years of experience in engineering, operations, or sales within our served industries, • 2+ years of experience supporting clients within a sales organization or process, • Proven ability to prioritize, multitask, and troubleshoot customer deliverables with a drive to produce customer successes, • Demonstrated ability to collaborate effectively within a team environment to achieve business results, • Strong work ethic, professionalism, and genuine pride in both individual and team accomplishments, • Excellent communication, interpersonal, organizational, and time management skills, • Proficiency with Microsoft Office Suite, Advanced Excel, and CRM systems, • Customer-focused mindset with ability to build and maintain strong client relationships, • Problem-solving approach to technical and commercial challenges How This Role Embodies Our Core Values: Customer Focus: You'll prioritize client needs by delivering accurate, timely technical solutions that exceed expectations and build lasting relationships. Collaboration: You'll achieve superior results by working closely with Account Managers, Sales Coordinators, and technical teams to deliver seamless customer experiences. Innovation: You'll apply creative engineering thinking to develop solutions that address complex customer process control challenges. Integrity: You'll build trust through honest, transparent communication and delivering on commitments consistently. Passion: You'll bring enthusiasm, dedication, and strong work ethic to advancing your technical expertise while driving sales success. What We Offer: Competitive Compensation & Growth Potential Base salary of $70,000-$93,000 plus bonus potential that rewards your technical expertise and sales contributions. Comprehensive Health & Wellness Benefits Multiple medical plan options plus vision and dental coverage for you and your dependents. Additional benefits include flexible spending accounts, health savings accounts, commuter tax benefits, and company-paid long-term disability and life insurance. Work-Life Balance Generous paid time off including vacation days, holidays, and sick leave. Standard business hours Monday-Friday, 8 AM-5 PM. Secure Your Future 401(k) plan with company matching contributions, plus our Employee Stock Ownership Plan (ESOP) - giving you an ownership stake in Control Associates' success. Invest in Your Growth Comprehensive in-house and client/system-specific technical training to continuously advance your engineering expertise. Ready to Advance Your Engineering Career? If you're an engineering professional with 2-3 years of experience who combines technical expertise with a collaborative mindset, strong work ethic, and genuine drive to deliver customer success, we want to hear from you! Join Control Associates and take the next step in your career with a company that invests in your growth and rewards your passion for excellence. Location: Allendale, NJ (in-office, not remote) | Relocation to NYC tri-state area required if not currently local. Work visa sponsorship not available. Direct hire only. Control Associates is an Equal Opportunity Employer committed to diversity in the workplace. Control Associates participates in E-Verify. Click here to view E-Verify Participant

Job Description The Dedicated Support Engineer is responsible for administering preventative maintenance (PM) and troubleshooting, calibrating, and performing electrical safety tests (EST) on automated equipment located in dedicated customer location. The ideal candidate is involved in all areas of the equipment technology, including monitoring work order requests, completing repairs, new equipment inspections and installations, PM’s, EST, inventory management, and documenting all service activities. The Dayshift Field Service Engineer will carry the following Key Accountabilites: • Perform tasks associated with the installation, maintenance, repair, troubleshooting, and assembly of automated microbiology equipment involving basic knowledge and abilities associated with the electronics, robotics, and mechanical processes., • Achieves performance measures associated with the maintenance of equipment, productivity, customer satisfaction, and other performance standards., • Complete all necessary documentation of activities involving the servicing of equipment in accordance with the manufacturer's requirements., • Serves as a resource for the proper operation and maintenance of equipment., • Instructs instrument operators in proper equipment use., • Adheres to the highest level of customer service while managing customer requests with diplomacy., • Provides technical support to customers by telephone as required., • Connects with customers through remote software to troubleshoot and resolve various technical issues. KEY COMPETENCIES: • Must reside in or around dedicated customers., • Must be reliable and able to work independently with limited supervision., • Excellent customer service expertise with outstanding communication skills., • Comfortable working in clinical environments with infectious agents and bio-hazards., • Computer literacy and the ability to read instrument schematics required., • Associate degree in Biomedical Equipment Technology, Industrial, Electrical, or Mechanical Engineering or minimum 2-3 years equivalent formal related training required., • Must be able to have manual dexterity to operate equipment and tools required on the job., • Must occasionally lift and/or move up to 50 lbs., • Must be able to occasionally crouch, kneel, and/or duck into tight spaces of the equipment., • Travel required (Approx. 10% or less) Company DescriptionBe a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.Be a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: Responsible for driving new business and growing key accounts across the assigned territory through strategic prospecting, relationship building, and technical solution selling. Develop and execute sales plans, interpret plans and specifications to build accurate estimates, and partner with internal engineering and operations teams to deliver BAS/BMS solutions that meet customer needs. Responsibilities: • Develop and execute a strategic sales plan to achieve sales targets and expand the customer base., • Conduct regular visits to clients and prospects to build relationships and understand their needs., • Interpret plans and specifications and develop estimates, • Present and demonstrate products and services to potential clients, highlighting their benefits and value., • Collaborate with internal teams to ensure timely delivery of products and services to clients., • Maintain accurate records of sales activities, customer interactions, and market feedback in the CRM system., • Identify new business opportunities and develop sales strategies, • Other duties as assigned. Required Qualifications: • Bachelor's degree in Mechanical Engineering, a related field or equivalent industry experience, • 2+ years of experience in outside sales in the building automation industry., • Strong understanding of sales principles and customer relationship management., • Ability to interpret plans & specifications and estimate projects., • Excellent communication and interpersonal skills., • An established network in the construction and facility management fields in the NY / NJ or Northeast area, • Experienced in working independently and managing time effectively., • Proven track record of strategic sales and sales territory management, • Valid driver's license and willingness to travel within the assigned territory. Preferred Qualifications: • 5+ years of experience with Building Automation Systems (BAS) or related technologies., • Familiarity with CRM software and sales analytics tools., • Demonstrated ability to close sales and meet or exceed targets., • Network of contacts within the construction industry., • Experience with Tridium Niagara-based control systems Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers, • Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment, • Sitting, standing, walking in office environments and construction sites, • The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate, • Will be required to be on site with customers or contractors, with or without BBT colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction., • Driving to customer sites is required, • Limited overnight travel may be required Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email talentacquisitionteam@climatec.com. Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job Description About Robert Bosch GmbH Headquartered in Germany, Robert Bosch GmbH is a premier global supplier with four primary business sectors: Automotive Technology, Industrial Technology, Consumer Goods, and Energy and Building Technology. Over 400,000+ associates generate sales of over €90 billion. Bosch improves quality of life worldwide with products and services that are innovative and spark enthusiasm. In short, Bosch creates technology that is “Invented for life.” Ninety-two percent of the share capital of Robert Bosch GmbH is held by Robert Bosch Stiftung GmbH, a charitable foundation. The special ownership structure guarantees the entrepreneurial freedom of the Bosch Group, making it possible for the company to plan over the long term and to undertake significant investments in safeguarding its future. In North America, Robert Bosch LLC supplies automotive original equipment and aftermarket products, industrial drive and control technology, power tool, security and building technology, thermo-technology, household appliances, solar energy, healthcare, and software innovations. Bosch established its regional presence in North America in 1906 and now employs 41,000 associates in more than one hundred locations. Bosch Building Technologies Integrator Business The regional system integration business called Bosch Building Technologies offers solutions and customized services for building security, energy efficiency, and building automation for commercial buildings and infrastructure projects Bosch started its Integrator Business in North America through the acquisition of Climatec in 2015. Climatec expanded Bosch’s role as a comprehensive supplier of energy, building automation and security solutions. Climatec is recognized in the building industry as an independent single-source integrator of critical building systems including energy services, building automation and security & life safety in the U.S. market. The company provides consulting, planning, implementation and 24/7 remote management. Climatec is active in several market segments and industries including data centers, commercial real estate buildings, and federal, state, and local government. Climatec has operated as an independent entity, maintaining its offices in Arizona, California, Nevada, Texas, New York, and New Jersey. Climatec continues to represent and integrate numerous leading manufactures’ product lines across its wide range of services, including Bosch products. In 2023, Bosch acquired Canadian-based security integrator Paladin Technologies. Merging Paladin Technologies and Climatec will significantly expand Bosch’s Integrator Business in North America. Today the combined entity of Bosch Building Technologies (previously Climatec and Paladin Technologies) represents over $800M in revenues and 2800 associates. Utilizing the strengths of both companies, Bosch offers its customers a complete portfolio of networked and efficient energy, building automation and security solutions. Job Summary: The Outside Sales Associate supports business development efforts by engaging new and existing customers, estimating projects, interpreting bid documents, and preparing proposals for building automation and mechanical solutions. This role builds relationships within the territory, collaborates closely with sales leadership, and develops technical and sales expertise through hands-on training and field experience. Responsibilities: • Interface with new and existing clients, • Define project requirements, estimate projects, build relationships, gather leads from established business partners, set appointments and recommend optimal Bosch Building solutions, • Interpret bid drawings and requirements, estimate project costs and write proposals, • .Work both independently and cooperatively within your designated area to close sales, secure business, and meet sales targets, • Develop skills required to understand sales strategy focused on decision-makers and business owners to establish a network and gain new business and expand relationships, • Collaborate daily with manager and team counterparts, • Participate in ongoing training, development, and mentoring, • Other duties as assigned. Required Qualifications: • Understanding of HVAC / controls / mechanical systems., • A positive Self-Starter attitude, • Good communication and people skills, • An ability to overcome obstacles and find solutions, • A commitment to ongoing learning to build upon past methods is essential Preferred Qualifications: • While an engineering degree is not essential, understanding of mechanical and/or BMS systems is preferred, and/or military experience, • 1-2 years of previous work experience or internships in Retail, Marketing, Business Development, Engineering, Technical Sales, or comparable fields are also preferred Physical Demands: In general, the following physical demands are representative of those that must be met by an employee to successfully perform the essential functions of the job. • Must be able to effectively communicate in English, (ie see, hear, speak and write clearly) in order to communicate with colleagues and/or customers, • Manual dexterity required for occasional reaching, lifting of light office objects, and operating office equipment, • Sitting, standing, walking in office environments and construction sites, • The employee must occasionally lift and/or move up to 50 pounds and may be required to work at heights over 1.8m (6 feet) Working Conditions: In general, the following conditions of the work environment are representative of those that an employee encounters while performing the essential functions of this job. • The office is clean, orderly, properly lighted and ventilated. Noise levels are considered low to moderate, • Will be required to be on site with customers or contractors, with or without BBT colleagues to manage the expectations and deliverables. Sites range from general office environments to new construction., • Driving to customer sites is required, • Limited overnight travel may be required Additional Information: • Working Hours: This position generally works Monday- Friday, overtime and on call when necessary, • Benefits:, • Medical, • Dental, • Vision, • Flexible Spending Accounts, • 401K w/ company match, • Life/AD&D/LTD, • Paid Vacation/Sick/Holidays, • Employee Assistance Program, • Pet Insurance Equal Employment Opportunity Statement This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. Equal Opportunity Employer, including disability / veterans. All your information will be kept confidential according to EEO guidelines. California Privacy Notice California residents have the right to receive additional notices about their personal information. To learn more, click here. Reasonable Accommodations If you require a reasonable accommodation in completing a job application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, you can reach out to our HR team for support at 602-944-3330 or email talentacquisitionteam@climatec.com. Please note our HR representatives do not have visibility of application or interview status. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this job Indefinite U.S. work authorized individuals only. Future sponsorship for work authorization unavailable.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The Senior Financial Data Analyst partners with the Director of Finance, Senior Leaders, and Finance Team to assist with automating processes and reporting, Collaborates closely with Operation Leaders to support strategic initiatives and decision-making, create financial models to provide insights to business operations, analyze and resolve data issues within the newly implemented systems, ensuring smooth operations, develop and maintain insightful financial dashboards and reports using advanced business intelligence tools and apply data mining techniques and visualization tools to support strategic planning, cost transparency, and operational efficiency. Primary Duties/Responsibilities: • The NJ Regulated finance team delivers operational support and education to a 500+ employee organization that delivers continuous clean drinking water for over 1 million customers within NJ. This role provides a dynamic learning environment to understand regulatory, customer, operational, and financial needs. In this role, you will directly work with operations leaders with the Finance Team. This collaborative team effort covers the core topics of FP&A, regulatory reporting, financial/AP controls, and operational KPIs. This stable team is highly motivated and empowered for new ideas and improvements; while also highly encouraging cross function education. As an employee you will find a balance between routine, self-led projects, and accessible leadership. Beyond a curious mind and strong financial data skills, a successful candidate will have a high desire to learn the operations, tinker and improve, challenge and execute., • Deliver FP&A support to Director of Finance, Manager, and Finance Team:, • Collaborate with monthly reporting, variance analysis, budget, and forecast deliverables., • Support month end close processes including accruals, AP, inventory, and reclasses., • Update annual allocations, capitalization, regulatory reports, and financial contractual obligations., • Leverage tools to provide a high level of data proficiency and analytical skills:, • Query, scrub, and manage data to provide transparency and insights., • Redevelop and automate existing reporting., • Monitor and create controls to drive the financial performance, accounting rules, state/federal regulatory compliance, and contractual agreements., • Strategic member for monthly Key Performance Indicators Leadership Review (partner in development, presentations, and strategy).Qualifications Education/Experience/Background: • Bachelor degree in Finance, Economics, Statistics, Engineering, a related field, or equivalent practical experience., • MBA preferred., • 3-5 years of progressive experience in Finance, Accounting, and/or Data., • Significant achievements in analyzing complex financial issues., • KPI or data science experience. Knowledge/Skills/Abilities: • Mastery of Excel and Google (or equivalent business intelligence data tools)., • Desire to learn about the Water Industry., • Strong analytical and problem-solving skills that translate to operational effectiveness., • High sense of urgency and ability to deliver on tasks and projects. Ability to identify creative solutions and to individually execute as a sole contributor., • Highly proficient with Google, Microsoft Office Suite, or equivalent system., • Highly effective management of data, data scrubbing, and data visualization (SQL/Power Query/Looker/ basics preferred)., • Integrity, reliability and autonomy., • Peoplesoft, Hyperion, Perspectives, Workday, SmartView knowledge are highly desirable., • Interpersonal skills with ability to interact with all levels of management. Additional Information Pay Range: $80000 to $90000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description For over 40 years, ONEMESA has been providing solutions for corrosion control and rust mitigation across all sectors. Headquartered in Tulsa, Oklahoma, ONEMESA encompasses multiple companies—MESA Products, MESA Services, Bass Engineering, and Hansen Drilling—each delivering specialized expertise and innovative solutions to meet our customers’ diverse needs. With regional offices across the country and an in-house team of project managers and engineers, ONEMESA is one of the top three providers of corrosion control solutions in the United States. Our commitment to delivering SAFE, innovative solutions for the protection of people, property, and the planet means we’re as invested in the solution as our customers. Joining the ONEMESA team means you’ll have access to benefits designed to meet the needs of you and your family. We offer comprehensive medical benefits, including dental and vision, as well as no-cost extras like annual health assessments and flu shots. Our compensation package includes a company-matched 401(k), life insurance, competitive pay, annual salary reviews with a job progression plan, and a generous profit-sharing program. About the Role: The Corrosion Technician plays a critical role in ensuring the integrity and longevity of industrial equipment and infrastructure by implementing effective corrosion control measures. This position involves conducting detailed inspections, monitoring corrosion rates, and applying protective coatings or treatments to prevent material degradation. The technician collaborates closely with engineering and maintenance teams to develop and execute corrosion mitigation strategies that comply with industry standards and safety regulations. Through meticulous data collection and analysis, the Corrosion Technician helps identify potential risks and recommends corrective actions to minimize downtime and costly repairs. Ultimately, this role supports the safe and efficient operation of facilities by preserving asset reliability and extending service life. Minimum Qualifications: • AMPP (NACE) CP1 with 2 years field related pipeline corrosion experience OR 5 years field related pipeline corrosion experience, • Must be able to read and comprehend maps and GPS systems, • Knowledgeable in field data acquisition / troubleshooting, • Proven ability to communicate effectively with clients and team members, • Detail oriented with strong organization and planning skills, • Must have a valid driver’s license with an acceptable driving record for insurability, • Must be able to work outdoors and be able to walk for long distances on uneven terrain Preferred Qualifications: • CIP 1 certification, • Experience using American Innovations technology products (Allegro, PCS, Bullhorn) Responsibilities: • Conduct testing including, but not limited to, structure-to-soil potential, soil resistance and current requirement, • Conduct rectifier maintenance inspections including necessary troubleshooting, adjustments, and repairs, • Correctly and safely operate test equipment including pipe and/or cable locaters, high input impedance digital multi-meters, clamp-on ammeters, electrical isolation inspection meters, and various hand and power tools, • Maintain assigned truck, tools, and equipment, • Prepare and deliver written and electronic administrative reports, • Deliver weekly verbal reports at technical staff meetings regarding project status, • Coordinate administrative and technical meetings and tasks between the company and the client, • Recognize and report business development opportunities to the sales and marketing team and represent the company in client interactions, • This position includes regular travel as the business requires, sometimes for long periods of time (two-week intervals)Other Physical Requirements and Working Conditions:, • Must be able to move safely over uneven terrain or in confined spaces, such as trenches, pits, and manholes, • Must be able to lift, carry, push or pull objects up to 50 pounds regularly, • Must be able to climb stairs, ramps and ladders regularly, • Sitting, standing, walking, or driving for long periods of time (1-3 hours), • Must be able to see, hear, and respond quickly to dangerous situations, • Primarily working outdoors, including extreme weather conditions, • Working around moving machinery, vehicles, and heavy equipment, • Wearing personal protective gear most of the day (safety glasses, steel-toed shoes, hard hat, gloves, safety vest, FRCs) Any compensation range provided for a role is an estimate determined by available market data. The actual amount may be higher or lower than the range provided considering each candidate’s knowledge, skills, abilities, and geographic location. If you have questions, please speak to your recruiter about the flexibility and detail of our compensation philosophy. For this role, we anticipate paying $25.00 or more per hour. ONEMESA is firmly committed to Equal Employment Opportunities (EEO) and fully complies with all federal, state, and local laws that prohibit employment discrimination on the basis of age, race, color, gender, sexual orientation, national origin, religion, disability, veteran status, and other classifications.

Job Description The Graveyard Dedicated Support Engineer is responsible for administering preventative maintenance (PM) and troubleshooting, calibrating, and performing electrical safety tests (EST) on automated equipment located in dedicated customer location. The ideal candidate is involved in all areas of the equipment technology, including monitoring work order requests, completing repairs, new equipment inspections and installations, PM’s, EST, inventory management, and documenting all service activities. The Dedidcated Field Service Engineer will be required of the follwoign KEY ACCOUNTABILITES: • Perform tasks associated with the installation, maintenance, repair, troubleshooting, and assembly of automated microbiology equipment involving basic knowledge and abilities associated with the electronics, robotics, and mechanical processes., • Achieves performance measures associated with the maintenance of equipment, productivity, customer satisfaction, and other performance standards., • Complete all necessary documentation of activities involving the servicing of equipment in accordance with the manufacturer's requirements., • Serves as a resource for the proper operation and maintenance of equipment., • Instructs instrument operators in proper equipment use., • Adheres to the highest level of customer service while managing customer requests with diplomacy., • Provides technical support to customers by telephone as required., • Connects with customers through remote software to troubleshoot and resolve various technical issues. KEY COMPETENCIES: • The desire to work in a nightshift setting ., • Must reside in or around dedicated customers., • Must be reliable and able to work independently with limited supervision., • Excellent customer service expertise with outstanding communication skills., • Comfortable working in clinical environments with infectious agents and bio-hazards., • Computer literacy and the ability to read instrument schematics required., • Associate degree in Biomedical Equipment Technology, Industrial, Electrical, or Mechanical Engineering or minimum 2-3 years equivalent formal related training required., • Must be able to have manual dexterity to operate equipment and tools required on the job., • Must occasionally lift and/or move up to 50 lbs., • Must be able to occasionally crouch, kneel, and/or duck into tight spaces of the equipment., • Travel required (Approx. 10% or less).Company DescriptionBe a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.Be a part of a dynamic and rapidly growing company. With a reputation for innovation, COPAN is the leading manufacturer of collection and transport systems in the world. COPAN’s collaborative approach to innovation in pre-analytics has resulted in the original FLOQSwabs, ESwab, FecalSwab, and UTM, as well as Full Laboratory Automation. COPAN’s collection and systems have been proven to advance the quality of traditional and contemporary microbiology assays. COPAN's automation includes specimen processing, smart incubation, digital imaging, and strong algorithms for the automatic segregation of bacterial cultures, followed by automated colony picking.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Spec, Manufacturing Engineer Job Code: 38727 Job Location: Clifton, NJ Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: Develops, implements and analyzes manufacturing engineering plans and projects and communicates them to internal and external customers. Defines, develops and transfers manufacturing and engineering tools, strategies and systems. Develops manufacturing strategies for specific products and processes. Actively participates with engineering project teams in order to coordinate the release of new products. Estimates and tracks manufacturing costs, determines time standards, and makes recommendations for tooling and process requirements of new or existing product lines. Maintains records and reporting systems for coordination of manufacturing operations. The candidate will perform a variety of engineering work in the development, improvement, and optimization of multiple processes and techniques, including circuit card assembly, standard module assembly, and electro-mechanical final assembly. The work will include improving and optimizing current processes, implementing new tooling, improving existing tooling, and creating robust technical documentation on existing processes and tooling. Essential Functions: • Implementing manufacturing standard work and best practices to improve operational metrics, • Translate drawing requirements into detailed work instructions for the assembly, integration, and testing of complex end-products, • Work with existing and legacy equipment, • Control and improve existing processes, • Perform failure analysis and risk mitigation, • Complete technical writing and training related tasks, • Coordinate with maintenance group for equipment upkeep and training, • Ability to obtain a US security clearance Qualifications: • Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Additional Skills: • Strong problem-solving and data analysis skills, • Electrical, Mechanical, or Industrial Engineering background preferred, • Experience with legacy tooling, code, and equipment, • Robust project management and technical writing skills, • Ability to communicate project status and risks to leadership team, • Expertise in making data driven decisions to improve and develop processes, • Experience using DFM, Six-Sigma and/or Lean Manufacturing Principles, • Experience using DMAIC process and associated tools In compliance with pay transparency requirements, the salary range for this role in New Jersey area is $82,500.00 - $153,000.00. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements. L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .