Trabajos en OlivaresCrear alertasJornada parcial

Asegurar la satisfacción de clientes, además de contribuir al logro de los objetivos de calidad y operativos del establecimiento. Se precisa personal de cocina para Hotel de 4* con alta capacidad de eventos, restaurante tematizado en arroces. Elaboración y Servicio al Cliente - Cumplimiento de lo

The Opportunity We are looking for an R&D Senior Power Electronics Engineer to join our Product Development team. In this role, you will contribute to the design, development, validation, and continuous improvement of advanced power conversion systems used across energy storage, photovoltaic applications, and grid‑connected solutions. You will work in a modern laboratory environment and collaborate closely with a multidisciplinary R&D team to bring innovative power electronic products from concept to industrialization. How You’ll Make an Impact • Selection, qualification and verification of semiconductors, passive components and protection devices, • Support a fast, iterative design process in a cross-functional, dedicated team. Use fast prototyping and lab mockups to close learning loops and achieve results quickly., • Perform commissioning tasks for power conversion and control systems for interfacing with storage systems in the laboratory., • Build up and maintain measurement test setups to verify performance, efficiency and robustness, • Working in modern laboratories; bringing up prototypes; evaluating designs limits, • Technical analysis of logs, errors, signals, and metrics; generation of clear and reusable reports to support engineering, quality, and certification., • Perform validation tests in the factory and in the field for prototype power conversion and control systems., • Component qualification and product certification processes., • Preparation of validation reports and technical documentation., • Creation of instructions and associated documentation for product deployment and operation. Your Background • BSc/MSc degree in engineering or an equivalent field as min requrirement., • Experience in the design of electrical systems and power electronics converters and their control., • Experience with simulation tools (Spice, PSCAD, Simulink, PLECS…), • Experience with specification, selection and qualification of power devices, and passive components like DC capacitors and filter components, • Previous experience in commissioning power converters, and the use and operation of measurement equipment and laboratory instrumentation will be valued., • Experience in managing, preparing, and executing prototype tests, customer tests, or product certifications, as well as preparing the corresponding test result reports, will be highly valued., • Interpretation of electrical schematics., • Advanced knowledge in power converters (AC/DC, DC/DC)., • Knowledge and experience in photovoltaic systems and energy storage systems, especially in the operation, integration, and testing of batteries and hybrid PV–battery solutions, will be positively valued., • Proficiency in interpreting electrical schematics, analyzing conversion topologies, operating modes, and system protection., • Strong commitment to safe work practices and dedication to following all relevant workplace safety guidelines., • A high level of self-motivation, curiosity and desire to learn about new technologies., • A collaborative, solutions-oriented approach and strong communication skills., • Strong analytical and problem-solving skills with a keen eye for detail., • As you will be part of a global business, fluency in written and spoken English is required, • Desirable requirements: at least 5 years or more of relevant experience in the requested requirements.The profile will be assessed according to the experience presented. More About Us You will join a dynamic, passionate, and collaborative team committed to innovation and continuous improvement. We offer a stimulating work environment, opportunities for learning and professional development, and the chance to contribute to the advancement of sustainable energy technologies on a global scale.

The Opportunity We are looking for an R&D Power Electronics Engineer to join our Product Development team. In this role, you will contribute to the design, development, validation, and continuous improvement of advanced power conversion systems used across energy storage, photovoltaic applications, and grid‑connected solutions. You will work in a modern laboratory environment and collaborate closely with a multidisciplinary R&D team to bring innovative power electronic products from concept to industrialization. How You’ll Make an Impact • Selection, qualification and verification of semiconductors, passive components and protection devices, • Support a fast, iterative design process in a cross-functional, dedicated team. Use fast prototyping and lab mockups to close learning loops and achieve results quickly., • Perform commissioning tasks for power conversion and control systems for interfacing with storage systems in the laboratory., • Build up and maintain measurement test setups to verify performance, efficiency and robustness, • Working in modern laboratories; bringing up prototypes; evaluating designs limits, • Technical analysis of logs, errors, signals, and metrics; generation of clear and reusable reports to support engineering, quality, and certification., • Perform validation tests in the factory and in the field for prototype power conversion and control systems., • Component qualification and product certification processes., • Preparation of validation reports and technical documentation., • Creation of instructions and associated documentation for product deployment and operation. Your Background • BSc/MSc degree in Engineering or an equivalent field (minimum requirement)., • Experience in the design of electrical systems and power electronic converters, including control strategies., • Hands-on experience with simulation tools such as SPICE, PSCAD, Simulink, PLECS, or similar., • Experience in specification, selection, and qualification of power devices and passive components (e.g., DC capacitors, filters)., • Valued experience in commissioning power converters, as well as operating measurement equipment and laboratory instrumentation., • Strong experience in managing, preparing, and executing prototype tests, customer tests, or product certifications, including the preparation of test result reports (highly valued)., • Advanced knowledge of AC/DC and DC/DC power converter topologies., • Knowledge and experience in photovoltaic systems and energy storage systems, particularly in the operation, integration, and testing of batteries and hybrid PV–battery solutions (positively valued)., • Strong proficiency in interpreting electrical schematics, analyzing conversion topologies, operating modes, and system protection., • Strong commitment to safe work practices and adherence to all relevant workplace safety guidelines., • High level of self‑motivation, curiosity, and eagerness to explore new technologies., • Strong analytical and problem‑solving skills with exceptional attention to detail., • A collaborative, solutions‑oriented approach, combined with strong communication skills., • Fluency in written and spoken English is required, as you will be part of a global team., • Desirable: at least 2 years of relevant experience. Evaluation will be based on the experience demonstrated. More About Us You will join a dynamic, passionate, and collaborative team committed to innovation and continuous improvement. We offer a stimulating work environment, opportunities for learning and professional development, and the chance to contribute to the advancement of sustainable energy technologies on a global scale.

The opportunity As an Electrical Design Engineer, you will be responsible for the electrical design and development of industrial equipment, ensuring compliance with technical specifications, international standards, and product requirements. You will actively contribute to product optimization, innovation, and validation throughout the development lifecycle, working closely with multidisciplinary teams. How you’ll make an impact • Execute Electrical Design: Develop electrical designs for industrial equipment using EPLAN to meet product and technical specifications., • Size Electrical Systems: Perform sizing of LV and MV electrical systems, components, and cabinets., • Select Components: Choose electrical components based on technical requirements and justificatory calculations., • Apply Standards: Analyze and extract requirements from applicable international standards., • Prepare Documentation: Create electrical drawings, wiring diagrams, validation reports, manuals, and technical documentation., • Optimize Products: Contribute to electrical optimization and value engineering activities., • Support Innovation: Provide technical input to product development and innovation initiatives., • Prototype Implementation: Support and participate in the implementation and validation of prototypes. Your background • Bachelor’s degree in Engineering or equivalent., • Experience in electrical design of industrial equipment or facilities using electrical design tools., • Professional experience with EPLAN, SolidWorks Electrical, or similar., • User-level knowledge of Office tools (Excel, Word, Visio, Project, etc.)., • Fluent in Spanish and English (at least C1)., • Experience in sizing LV and MV electrical systems, components, and cabinets., • Knowledge of battery fuse selection and safety regulations is a plus., • Experience in electrical systems and power electronics design is a plus., • Experience in value engineering activities is a plus., • At least 3 years of relevant professional experience is desirable. More about us • You will work on technically challenging and meaningful projects within a collaborative and innovative environment., • We support continuous learning and professional development, encouraging growth at every stage of your career., • We foster a culture of collaboration, diversity of thought, and technical excellence., • Join a team where your expertise, ideas, and initiative contribute directly to the development of high-quality, innovative products.

The opportunity As a Product Industrial Validation & Certification (PIVC) Manager, you will be responsible for leading the Verification & Validation (V&V) Center, ensuring that advanced power electronics products meet all functional, performance, reliability, and compliance requirements. You will work closely with R&D, industrialization, quality, and certification bodies to define and execute validation strategies based on cutting-edge methodologies, including Hardware-in-the-Loop (HIL), real-time simulation, and full-scale power testing. This role offers a unique opportunity to drive technical excellence, ensure product robustness, and contribute to the successful deployment of innovative solutions for grid integration and energy transition. How you’ll make an impact • Define and implement the global V&V strategy across the full product lifecycle, • Establish comprehensive validation frameworks covering component, subsystem, and system-level testing, • Ensure alignment between validation activities, R&D development, and certification requirements, • Lead the development and operation of V&V laboratory infrastructure, including:, • Hardware-in-the-Loop (HIL) systems and real-time simulators, • Grid emulators and power test benches (MV/LV), • Environmental and reliability testing setups, • Define and execute the roadmap for test capabilities, focusing on automation, digitalization, and scalability, • Ensure high availability and optimal utilization of test assets, • Oversee test planning, execution, and reporting across multiple parallel projects, • Ensure full traceability between requirements, test cases, and validation results, • Supervise system validation activities, including grid code compliance and dynamic performance testing, • Collaborate with Quality to define control plans and process FMEA, • Identify product risks through rigorous validation campaigns and testing activities, • Lead root cause analysis and corrective actions for test failures, • Contribute to improving product reliability and robustness Your background • University degree in Electrical Engineering, Electronics, or similar, • Strong experience in power electronics systems (converters, inverters, PCS, grid integration), • Good understanding of verification methodologies (V-cycle, requirement-based testing), • Hands-on experience with Hardware-in-the-Loop (HIL) systems (e.g., OPAL-RT, Typhoon, RTDS or similar), • Knowledge of real-time simulation and grid emulation, • Experience in high-power testing (MV/LV), including load profiles, thermal, and dynamic behaviour, • Background in control systems validation (firmware, DSP/FPGA interaction), • Strong communication skills in international environments, • Fluent in Spanish and English (minimum B2 level) Nice to have: • Knowledge of standards and certifications (IEC, UL, IEEE, grid codes), • Experience with data acquisition, automation, and test scripting, • Project or program management experience across multiple developments More about us We offer a permanent position where you will be part of a collaborative and forward-thinking environment, working on state-of-the-art power electronics technologies that support the transition to more sustainable energy systems. You will have the opportunity to lead advanced validation activities, work with cutting-edge testing infrastructure, and contribute to delivering reliable, high-performance solutions in a global organization that values innovation, continuous improvement, and teamwork.

Descripción de la empresa ELITE ASESORES ENTERPRISE S.L. es una empresa dedicada al asesoramiento jurídico, laboral y fiscal ubicada en el municipio de Espartinas, Sevilla. Descripción del puesto Como Auxiliar administrativo en ELITE ASESORES ENTERPRISE S.L., elaborarás nóminas, altas- bajas de trabajadores y seguros sociales. Además, serás de apoyo en el departamento de contabilidad (contabilización de facturas y bancos, tanto autónomos como sociedades). Requisitos • Conocimientos en el paquete Office., • Conocimientos en el programa de gestión de nóminas "NÓMINAPLUS"., • Control en SILTRA, SISTEMA RED Y GESCONTRAT@., • Conocimientos en el programa de gestión de contabilidad "C+S" de MONITOR INFORMÁTICA. Condiciones • Contrato Indefinida a media jornada ampliable a jornada completa en cuestión de meses., • Vehículo propio., • Horario de mañanas a convenir., • Sueldo en función de la valía.

En TEMPS estamos seleccionando un/a Encargado/a de Montajes para incorporarse a un proyecto estable dentro de una empresa consolidada y en crecimiento, especializada en soluciones técnicas temporales para sectores como industria, construcción, administraciones públicas y eventos. Buscamos una persona con experiencia en coordinación de equipos técnicos y supervisión de montajes, con capacidad para organizar la operativa diaria, aportar soporte técnico y garantizar la correcta ejecución de los trabajos en cliente. Funciones: • Coordinar y organizar el trabajo diario del equipo de técnicos montadores, proporcionando apoyo técnico cuando sea necesario., • Realizar visitas técnicas, elaborar hojas de costes y asesorar al cliente sobre la mejor solución técnica., • Supervisar y analizar planos y proyectos de instalación., • Realizar el seguimiento directo de los montajes en las instalaciones del cliente., • Coordinar la preparación de equipos y materiales necesarios para cada trabajo., • Redactar incidencias y elaborar informes técnicos., • Colaborar con el área de Montajes y Logística en la planificación de los trabajos., • Gestionar el control de horas, guardias y bolsa de horas del equipo., • Planificar vacaciones, ausencias y necesidades operativas del personal., • Detectar necesidades formativas y colaborar en la planificación del desarrollo del equipo., • Reportar semanal y mensualmente a Dirección de Montajes. Responsabilidades: • Garantizar la correcta organización y funcionamiento del equipo técnico y de montaje., • Asegurar la correcta ejecución de los trabajos en cliente, tanto a nivel técnico como de medios., • Asesorar a los clientes en la solución técnica más adecuada según cada necesidad., • Apoyar, formar y resolver incidencias del equipo de montadores., • Elaborar informes técnicos de seguimiento de la actividad. Ofrecemos: • Contrato indefinido., • Salario bruto anual entre 27.000 € y 30.000 €, en función de la experiencia aportada., • Incorporación a un proyecto estable dentro de una empresa consolidada y en crecimiento., • Posibilidades de desarrollo profesional y crecimiento interno., • Buen ambiente de trabajo y equipo técnico especializado., • Formación continua a cargo de la empresa. Requisitos Formación mínima de Ciclo Formativo de Grado Medio. Experiencia mínima de más de 5 años. Permiso de conducir B. Valorable permiso de conducir C + CAP. Conocimientos de Word, Excel, Internet e informática a nivel usuario. Muy valorables conocimientos y/o experiencia en electricidad. Valorable experiencia como montador/a en sectores como aluminio, electricidad o carpintería. Valorable experiencia en logística y en gestión de equipos de trabajo. Valorable experiencia mínima de 2 años en un puesto similar. Valorable formación en electricidad.

The opportunity As an Industrialization Team Leader (Power Electronics), you will be responsible for leading the industrialization of advanced power conversion products, ensuring a seamless transition from R&D to mass production. You will work closely with cross-functional and global teams to deliver scalable, cost-efficient, and high-quality manufacturing solutions. This role offers a unique opportunity to bridge engineering and operations, driving industrial excellence while contributing to the deployment of innovative technologies for the energy transition. How you’ll make an impact • Lead the industrialization of new products (converters, inverters, PCS), ensuring an efficient New Product Introduction (NPI) process from design to serial production, • Collaborate with R&D teams to ensure Design for Manufacturing (DFM) and Design for Testability (DFT) principles are fully implemented, • Validate manufacturing processes and guarantee that product design requirements are properly translated into production, • Design, implement, and optimize manufacturing processes, including electronic assembly, power assembly, wiring, and mechanical integration, • Define plant layouts, workflows, and takt time to meet production targets, • Select and implement industrial equipment, including assembly tools and automation systems, • Define and control industrial product costs (BoM + BoP), • Identify and drive productivity improvements through lean manufacturing and automation initiatives, • Lead cost reduction activities (VA/VE – Value Analysis / Value Engineering), • Act as a key interface between R&D, Manufacturing, Supply Chain, Quality, and Service, • Coordinate with key suppliers such as PCB manufacturers, integrators, and contract manufacturers, • Manage industrialization projects in a global, multi-site environment, ensuring alignment on timelines, risks, and resources Your background • Degree in Engineering (Industrial, Electrical, Electronic, or similar), • 3–5 years of experience in industrialization or manufacturing engineering, ideally within power electronics, automotive, energy, or renewables sectors, • Solid knowledge of manufacturing processes: electronic assembly, power assembly, wiring, mechanical integration, • Experience managing complex projects, including timelines, resources, and risks, • Strong communication skills and ability to work effectively in international environments, • Fluency in spoken and written English and Spanish is required (at least B2). Nice to have: • Understanding of power electronics technologies (topologies, IGBT, SiC, system integration), • Familiarity with standards and certifications (IEC, UL, grid codes), • Experience with tools such as PLM, ERP, MES, basic CAD, and cost analysis, • Knowledge of Lean and Six Sigma methodologies, • Experience leading multidisciplinary teams (process engineering, quality, testing) More about us We offer a permanent position where you will be part of an international and collaborative environment, working on cutting-edge power electronics technologies that enable the energy transition. You will have the opportunity to contribute to impactful projects, develop your technical and leadership skills, and grow within an organization that values innovation, continuous improvement, and teamwork.

The Opportunity We are looking for an R&D Validation and Certification Engineer to join our Product Development team. In this role, you will contribute to the validation, testing, and commissioning of advanced power conversion systems used in energy storage and photovoltaic applications. You will work in a modern laboratory environment, collaborating with a multidisciplinary R&D team to ensure product performance, reliability, and compliance from concept to certification. How You’ll Make an Impact • Perform commissioning tasks for power conversion and control systems interfacing with energy storage systems in the laboratory., • Conduct technical analysis of logs, errors, signals, and metrics, generating clear and reusable reports to support engineering, quality, and certification processes., • Study system stability and response to electrical transients (e.g. voltage dips, frequency disturbances, fault conditions, and power oscillation damping)., • Analyze specifications and requirements for electronic equipment under development., • Simulate and debug control algorithms, ensuring compliance with grid codes., • Participate in the definition of validation strategies, test plans, procedures, and acceptance criteria., • Execute validation tests both in the factory and in the field for prototype power conversion systems., • Ensure full test traceability, from requirement definition to final reporting., • Perform proof-of-concept validation of hardware and software components., • Support component approval and product certification processes., • Prepare validation reports and technical documentation., • Develop and implement test automation solutions, including Python-based tools where applicable. Your Background • BSc in Engineering or equivalent (minimum requirement)., • Solid experience in the design of electrical systems and power electronics converters and their control., • Experience in validation of electronic products and/or embedded software, including laboratory test benches and HIL systems., • Experience with simulation tools (Spice, PSCAD, Simulink, PLECS)., • Advanced knowledge of power converters (AC/DC, DC/DC)., • Experience in commissioning power converters and working with laboratory instrumentation is valued., • Knowledge of photovoltaic and energy storage systems, including battery integration and hybrid PV–battery solutions, is a plus., • Experience in Python and test automation is desirable., • Strong analytical and problem-solving skills, with attention to detail., • High level of self-motivation, curiosity, and willingness to learn new technologies., • Fluent in English and Spanish (both written and spoken)., • Desirable: 5+ years of relevant experience (final level will depend on candidate profile)., • Availability to work in shifts (turn-based schedule) is considered a plus. More About Us You will join a dynamic, passionate, and collaborative team committed to innovation and continuous improvement. We offer a stimulating work environment, opportunities for learning and professional growth, and the chance to contribute to cutting-edge technologies driving the energy transition worldwide.

Se busca profesores/estudiantes/universitarios para brindar clases de distintas materias a estudiantes de diferentes niveles educativos (primaria, secundaria, bachillerato o universidad). No se requiere experiencia previa como profesor.

Me llamo scar. Tenemos 2 hijos (Nio, 3), (Nia, 2 ). Busco una persona cariosa, creativa y responsable para estar con mis hijos en momentos como despus de trabajar (17 en adelante), en momento cena y bao (20/21 horas) o eventos puntuales. Se valora disponibilidad alta y coche.

Hola! Somos una pareja joven de Umbrete que tenemos al pequeo Hctor, que apenas tiene unos meses de nacido.Necesitamos niera ocasional, para poder salir nosotros de vez en cuando a cenar o simplemente disfrutar un rato sin el peque, como todos los papis.Hctor de momento duerme mucho y tambin come mu

Pap, mam, mi hija de casi 5 aos y el beb de 10 meses.Solemos estar en casa, pero a veces tenemos que llevar a la nia a cumpleaos y preferimos quedarnos en casa con el beb alguno de nosotros.Sin embargo, con el beb no puede su padre trabajar.Por eso necesitamos a alguna chica que nos ayude.

Hola!! Somos una familia nueva en Salteras.Tanto papi como mami trabajan y salen muy temprano de casa y a partir de septiembre necesitaremos la ayuda de alguien que nos ayude a vestirnos, desayunar y nos acompae al cole y la guarde.Sera interesante que tuviera coche, ya que el cole pilla un poco lej

Tenemos un/a hijo/a (1 Nio, 0 aos).No dudes en ponerte en contacto conmigo para conocernos.

Tenemos un/a hijo/a (1 Nia, 7 aos).No dudes en ponerte en contacto conmigo para conocernos.

Somos Diego y Rut y nos encantara encontrar a alguien que venga a jugar con nuestro hijo, Marco, y a estar con l mientras hacemos tareas de trabajo (somos autnomos) dentro o fuera de casa.Marco tiene 15 meses y es muy carioso y tranquilo (dentro de que es un beb).Se porta genial y le encanta explora

Estara interesada en el cuidado de las tardes de lunes, martes, viernes y sbado y domingo maana y tarde. Busco cuidadora para m hija de casi 4 aos, ya que trabajo a turnos partidos.

Hola somos una familia de dos nios, mis padres, pero ello razones de que estn malos no pueden quedarse con ellos, si tengo que trabajar por la noche y mis padres se ponen malo no se pueden quedar con ellos

Somos una familia con 3 nios de dos parejas distintas.Nuestro horario debido al trabajo es cambiante y nos vamos a ver obligados a contratar a una persona para que est con ellos las tardes noche o si hay disponibilidad.

Somos un matrimonio con unos 40 aos con una nia de 1ao.Los dos trabajamos por la maana y llevamos a la nia a guardera de enfrente de casa.Algunas veces necesitamos alguien para cuidar a nuestra nia por la tarde o por la maana algn da que est mala.

Yo soy msico y mi nia es un sol.Soy un papa divorciado de 38 aos.Salud es muy risuea, no llora nunca y le gustan los cuentos e ir al parque.

Somos una familia muy cariosa y fomentamos el amor en casa como ejemplo para nuestra hija.Nos gustan los valores y la educacin.Por nuestra forma de vivir solemos hacer muchos planes y tambin estamos mucho tiempo fuera por trabajo, pero siempre intentamos que sean los menos.Necesitamos a alguien que

Hola! Somos una pareja con un nio de 3 aos.Yo soy estadounidense y mi marido es espaol.Nuestro hijo habla los dos idiomas y sera genial si hablases ingles, aunque no es necesario.Nos gustara que alguien pudiera recoger a nuestro hijo del cole en Gines (cerca de nuestra casa), a las 16:30, y que estu

Somos Sara y Nacho, papis de dos tesoros de 6 meses y 3 aos. Buscamos una persona amable y proactiva que nos ayude en casa con los pequeos mientras tele trabajamos.

The Opportunity We are looking for an R&D Power Electronics Engineer to join our Product Development team. In this role, you will contribute to the design, development, validation, and continuous improvement of advanced power conversion systems used across energy storage, photovoltaic applications, and grid‑connected solutions. You will work in a modern laboratory environment and collaborate closely with a multidisciplinary R&D team to bring innovative power electronic products from concept to industrialization. How You’ll Make an Impact Selection, qualification and verification of semiconductors, passive components and protection devices Support a fast, iterative design process in a cross-functional, dedicated team. Use fast prototyping and lab mockups to close learning loops and achieve results quickly. Perform commissioning tasks for power conversion and control systems for interfacing with storage systems in the laboratory. Build up and maintain measurement test setups to verify performance, efficiency and robustness Working in modern laboratories; bringing up prototypes; evaluating designs limits Technical analysis of logs, errors, signals, and metrics; generation of clear and reusable reports to support engineering, quality, and certification. Perform validation tests in the factory and in the field for prototype power conversion and control systems. Component qualification and product certification processes. Preparation of validation reports and technical documentation. Creation of instructions and associated documentation for product deployment and operation. Your Background BSc/MSc degree in Engineering or an equivalent field (minimum requirement). Experience in the design of electrical systems and power electronic converters, including control strategies. Hands-on experience with simulation tools such as SPICE, PSCAD, Simulink, PLECS, or similar. Experience in specification, selection, and qualification of power devices and passive components (e.g., DC capacitors, filters). Valued experience in commissioning power converters, as well as operating measurement equipment and laboratory instrumentation. Strong experience in managing, preparing, and executing prototype tests, customer tests, or product certifications, including the preparation of test result reports (highly valued). Advanced knowledge of AC/DC and DC/DC power converter topologies. Knowledge and experience in photovoltaic systems and energy storage systems, particularly in the operation, integration, and testing of batteries and hybrid PV–battery solutions (positively valued). Strong proficiency in interpreting electrical schematics, analyzing conversion topologies, operating modes, and system protection. Strong commitment to safe work practices and adherence to all relevant workplace safety guidelines. High level of self‑motivation, curiosity, and eagerness to explore new technologies. Strong analytical and problem‑solving skills with exceptional attention to detail. A collaborative, solutions‑oriented approach, combined with strong communication skills. Fluency in written and spoken English is required, as you will be part of a global team. * Desirable: at least 2 years of relevant experience. Evaluation will be based on the experience demonstrated. More About Us You will join a dynamic, passionate, and collaborative team committed to innovation and continuous improvement. We offer a stimulating work environment, opportunities for learning and professional development, and the chance to contribute to the advancement of sustainable energy technologies on a global scale.

The opportunity As a Product Industrial Validation & Certification (PIVC) Manager, you will be responsible for leading the Verification & Validation (V&V) Center, ensuring that advanced power electronics products meet all functional, performance, reliability, and compliance requirements. You will work closely with R&D, industrialization, quality, and certification bodies to define and execute validation strategies based on cutting-edge methodologies, including Hardware-in-the-Loop (HIL), real-time simulation, and full-scale power testing. This role offers a unique opportunity to drive technical excellence, ensure product robustness, and contribute to the successful deployment of innovative solutions for grid integration and energy transition. How you’ll make an impact • Define and implement the global V&V strategy across the full product lifecycle, • Establish comprehensive validation frameworks covering component, subsystem, and system-level testing, • Ensure alignment between validation activities, R&D development, and certification requirements, • Lead the development and operation of V&V laboratory infrastructure, including:, • Hardware-in-the-Loop (HIL) systems and real-time simulators, • Grid emulators and power test benches (MV/LV), • Environmental and reliability testing setups, • Define and execute the roadmap for test capabilities, focusing on automation, digitalization, and scalability, • Ensure high availability and optimal utilization of test assets, • Oversee test planning, execution, and reporting across multiple parallel projects, • Ensure full traceability between requirements, test cases, and validation results, • Supervise system validation activities, including grid code compliance and dynamic performance testing, • Collaborate with Quality to define control plans and process FMEA, • Identify product risks through rigorous validation campaigns and testing activities, • Lead root cause analysis and corrective actions for test failures, • Contribute to improving product reliability and robustness Your background • University degree in Electrical Engineering, Electronics, or similar, • Strong experience in power electronics systems (converters, inverters, PCS, grid integration), • Good understanding of verification methodologies (V-cycle, requirement-based testing), • Hands-on experience with Hardware-in-the-Loop (HIL) systems (e.g., OPAL-RT, Typhoon, RTDS or similar), • Knowledge of real-time simulation and grid emulation, • Experience in high-power testing (MV/LV), including load profiles, thermal, and dynamic behaviour, • Background in control systems validation (firmware, DSP/FPGA interaction), • Strong communication skills in international environments, • Fluent in Spanish and English (minimum B2 level) Nice to have: • Knowledge of standards and certifications (IEC, UL, IEEE, grid codes), • Experience with data acquisition, automation, and test scripting, • Project or program management experience across multiple developments More about us We offer a permanent position where you will be part of a collaborative and forward-thinking environment, working on state-of-the-art power electronics technologies that support the transition to more sustainable energy systems. You will have the opportunity to lead advanced validation activities, work with cutting-edge testing infrastructure, and contribute to delivering reliable, high-performance solutions in a global organization that values innovation, continuous improvement, and teamwork.

The opportunity As an Electrical Design Engineer, you will be responsible for the electrical design and development of industrial equipment, ensuring compliance with technical specifications, international standards, and product requirements. You will actively contribute to product optimization, innovation, and validation throughout the development lifecycle, working closely with multidisciplinary teams. How you’ll make an impact • Execute Electrical Design: Develop electrical designs for industrial equipment using EPLAN to meet product and technical specifications., • Size Electrical Systems: Perform sizing of LV and MV electrical systems, components, and cabinets., • Select Components: Choose electrical components based on technical requirements and justificatory calculations., • Apply Standards: Analyze and extract requirements from applicable international standards., • Prepare Documentation: Create electrical drawings, wiring diagrams, validation reports, manuals, and technical documentation., • Optimize Products: Contribute to electrical optimization and value engineering activities., • Support Innovation: Provide technical input to product development and innovation initiatives., • Prototype Implementation: Support and participate in the implementation and validation of prototypes. Your background • Bachelor’s degree in Engineering or equivalent., • Experience in electrical design of industrial equipment or facilities using electrical design tools., • Professional experience with EPLAN, SolidWorks Electrical, or similar., • User-level knowledge of Office tools (Excel, Word, Visio, Project, etc.)., • Fluent in Spanish and English (at least C1)., • Experience in sizing LV and MV electrical systems, components, and cabinets., • Knowledge of battery fuse selection and safety regulations is a plus., • Experience in electrical systems and power electronics design is a plus., • Experience in value engineering activities is a plus., • At least 3 years of relevant professional experience is desirable. More about us • You will work on technically challenging and meaningful projects within a collaborative and innovative environment., • We support continuous learning and professional development, encouraging growth at every stage of your career., • We foster a culture of collaboration, diversity of thought, and technical excellence., • Join a team where your expertise, ideas, and initiative contribute directly to the development of high-quality, innovative products.

The Opportunity We are looking for an R&D Power Electronics Engineer to join our Product Development team. In this role, you will contribute to the design, development, validation, and continuous improvement of advanced power conversion systems used across energy storage, photovoltaic applications, and grid‑connected solutions. You will work in a modern laboratory environment and collaborate closely with a multidisciplinary R&D team to bring innovative power electronic products from concept to industrialization. How You’ll Make an Impact • Selection, qualification and verification of semiconductors, passive components and protection devices, • Support a fast, iterative design process in a cross-functional, dedicated team. Use fast prototyping and lab mockups to close learning loops and achieve results quickly., • Perform commissioning tasks for power conversion and control systems for interfacing with storage systems in the laboratory., • Build up and maintain measurement test setups to verify performance, efficiency and robustness, • Working in modern laboratories; bringing up prototypes; evaluating designs limits, • Technical analysis of logs, errors, signals, and metrics; generation of clear and reusable reports to support engineering, quality, and certification., • Perform validation tests in the factory and in the field for prototype power conversion and control systems., • Component qualification and product certification processes., • Preparation of validation reports and technical documentation., • Creation of instructions and associated documentation for product deployment and operation. Your Background • BSc/MSc degree in Engineering or an equivalent field (minimum requirement)., • Experience in the design of electrical systems and power electronic converters, including control strategies., • Hands-on experience with simulation tools such as SPICE, PSCAD, Simulink, PLECS, or similar., • Experience in specification, selection, and qualification of power devices and passive components (e.g., DC capacitors, filters)., • Valued experience in commissioning power converters, as well as operating measurement equipment and laboratory instrumentation., • Strong experience in managing, preparing, and executing prototype tests, customer tests, or product certifications, including the preparation of test result reports (highly valued)., • Advanced knowledge of AC/DC and DC/DC power converter topologies., • Knowledge and experience in photovoltaic systems and energy storage systems, particularly in the operation, integration, and testing of batteries and hybrid PV–battery solutions (positively valued)., • Strong proficiency in interpreting electrical schematics, analyzing conversion topologies, operating modes, and system protection., • Strong commitment to safe work practices and adherence to all relevant workplace safety guidelines., • High level of self‑motivation, curiosity, and eagerness to explore new technologies., • Strong analytical and problem‑solving skills with exceptional attention to detail., • A collaborative, solutions‑oriented approach, combined with strong communication skills., • Fluency in written and spoken English is required, as you will be part of a global team., • Desirable: at least 2 years of relevant experience. Evaluation will be based on the experience demonstrated. More About Us You will join a dynamic, passionate, and collaborative team committed to innovation and continuous improvement. We offer a stimulating work environment, opportunities for learning and professional development, and the chance to contribute to the advancement of sustainable energy technologies on a global scale.

R&D Senior Power Electronics Engineer.

R&D Senior Power Electronics Engineer.

The opportunity As an Electrical Design Engineer, you will be responsible for the electrical design and development of industrial equipment, ensuring compliance with technical specifications, international standards, and product requirements. You will actively contribute to product optimization, innovation, and validation throughout the development lifecycle, working closely with multidisciplinary teams. How you’ll make an impact • Execute Electrical Design: Develop electrical designs for industrial equipment using EPLAN to meet product and technical specifications., • Size Electrical Systems: Perform sizing of LV and MV electrical systems, components, and cabinets., • Select Components: Choose electrical components based on technical requirements and justificatory calculations., • Apply Standards: Analyze and extract requirements from applicable international standards., • Prepare Documentation: Create electrical drawings, wiring diagrams, validation reports, manuals, and technical documentation., • Optimize Products: Contribute to electrical optimization and value engineering activities., • Support Innovation: Provide technical input to product development and innovation initiatives., • Prototype Implementation: Support and participate in the implementation and validation of prototypes. Your background • Bachelor’s degree in Engineering or equivalent., • Experience in electrical design of industrial equipment or facilities using electrical design tools., • Professional experience with EPLAN, SolidWorks Electrical, or similar., • User-level knowledge of Office tools (Excel, Word, Visio, Project, etc.)., • Fluent in Spanish and English (at least C1)., • Experience in sizing LV and MV electrical systems, components, and cabinets., • Knowledge of battery fuse selection and safety regulations is a plus., • Experience in electrical systems and power electronics design is a plus., • Experience in value engineering activities is a plus., • At least 3 years of relevant professional experience is desirable. More about us • You will work on technically challenging and meaningful projects within a collaborative and innovative environment., • We support continuous learning and professional development, encouraging growth at every stage of your career., • We foster a culture of collaboration, diversity of thought, and technical excellence., • Join a team where your expertise, ideas, and initiative contribute directly to the development of high-quality, innovative products.

You will work in a modern laboratory environment and collaborate closely with a multidisciplinary R&D team to bring innovative power electronic products from concept to industrialization. Hands-on experience with simulation tools such as SPICE, PSCAD, Simulink, PLECS, or similar. Use fast prototypin

Buscamos una persona con experiencia en coordinación de equipos técnicos y supervisión de montajes, con capacidad para organizar la operativa diaria, aportar soporte técnico y garantizar la correcta ejecución de los trabajos en cliente.Coordinar y organizar el trabajo diario del equipo de técn

Buscamos una persona con experiencia en coordinación de equipos técnicos y supervisión de montajes, con capacidad para organizar la operativa diaria, aportar soporte técnico y garantizar la correcta ejecución de los trabajos en cliente.Coordinar y organizar el trabajo diario del equipo de técn

Collaborate with Quality to define control plans and. University degree in Electrical Engineering, Electronics, or similar. We offer a permanent position where you will be part of a collaborative and forward-thinking environment, working on state-of-the-art power electronics technologies that suppor

Requisitos: • Experiencia laboral: 5 años o más de experiencia como Ingeniero/a Civil/ Ingeniero/a de Caminos, Canales y Puertos. Objetivo de la posición: Como Ingeniero/a Civil/ ICCP darás asistencia técnica en la redacción de informes, estudios y Proyectos en el ámbito de la Ingeniería C

Qué estamos buscando? Cubrir un puesto de Director/a Nacional de Almacenes que lidere la gestión integral de nuestra red logística a nivel nacional, contribuyendo activamente a la eficiencia operativa, la calidad de servicio y la transformación de nuestros procesos.

Estamos en búsqueda de un/a ingeniero de diseño para incorporarse a nuestro departamento técnico.

Como Auxiliar administrativo en ELITE ASESORES ENTERPRISE S.

Como Auxiliar administrativo en ELITE ASESORES ENTERPRISE S.

Resolver incidencias funcionales y técnicas relacionadas con SAP. Experiencia trabajando con SAP CPI e integraciones. Conocimientos de APIs e interfaces SAP.

Product Industrial Validation & Certification (PIVC) Manager. You will work closely with R&D, industrialization, quality, and certification bodies to define and execute validation strategies based on cutting-edge methodologies, including.

The Opportunity We are looking for an R&D Power Electronics Engineer to join our Product Development team. In this role, you will contribute to the design, development, validation, and continuous improvement of advanced power conversion systems used across energy storage, photovoltaic applications, and grid‑connected solutions. You will work in a modern laboratory environment and collaborate closely with a multidisciplinary R&D team to bring innovative power electronic products from concept to industrialization. How You’ll Make an Impact • Selection, qualification and verification of semiconductors, passive components and protection devices • Support a fast, iterative design process in a cross-functional, dedicated team. Use fast prototyping and lab mockups to close learning loops and achieve results quickly. • Perform commissioning tasks for power conversion and control systems for interfacing with storage systems in the laboratory. • Build up and maintain measurement test setups to verify performance, efficiency and robustness • Working in modern laboratories; bringing up prototypes; evaluating designs limits • Technical analysis of logs, errors, signals, and metrics; generation of clear and reusable reports to support engineering, quality, and certification. • Perform validation tests in the factory and in the field for prototype power conversion and control systems. • Component qualification and product certification processes. • Preparation of validation reports and technical documentation. • Creation of instructions and associated documentation for product deployment and operation. Your Background • BSc/MSc degree in Engineering or an equivalent field (minimum requirement). • Experience in the design of electrical systems and power electronic converters, including control strategies. • Hands-on experience with simulation tools such as SPICE, PSCAD, Simulink, PLECS, or similar. • Experience in specification, selection, and qualification of power devices and passive components (e.g., DC capacitors, filters). • Valued experience in commissioning power converters, as well as operating measurement equipment and laboratory instrumentation. • Strong experience in managing, preparing, and executing prototype tests, customer tests, or product certifications, including the preparation of test result reports (highly valued). • Advanced knowledge of AC/DC and DC/DC power converter topologies. • Knowledge and experience in photovoltaic systems and energy storage systems, particularly in the operation, integration, and testing of batteries and hybrid PV–battery solutions (positively valued). • Strong proficiency in interpreting electrical schematics, analyzing conversion topologies, operating modes, and system protection. • Strong commitment to safe work practices and adherence to all relevant workplace safety guidelines. • High level of self‑motivation, curiosity, and eagerness to explore new technologies. • Strong analytical and problem‑solving skills with exceptional attention to detail. • A collaborative, solutions‑oriented approach, combined with strong communication skills. • Fluency in written and spoken English is required, as you will be part of a global team. • Desirable: at least 2 years of relevant experience. Evaluation will be based on the experience demonstrated. More About Us You will join a dynamic, passionate, and collaborative team committed to innovation and continuous improvement. We offer a stimulating work environment, opportunities for learning and professional development, and the chance to contribute to the advancement of sustainable energy technologies on a global scale.

The Opportunity We are looking for an R&D Senior Power Electronics Engineer to join our Product Development team.

Grupo Loxam, multinacional líder en alquiler y venta de maquinaria, selecciona un “Técnico/a electromecánico/a – Grupos electrógenos” para su delegación de Camas, Sevilla. Funciones principales: • Realización de descargos e instalación de grupos tras visitas y mediciones en las instalaciones del cliente • Mantenimiento preventivo y correctivo de los equipos tanto en taller como en obra para clientes. • Entrega y recogida de equipos en la zona asignada, incluyendo el montaje e instalación de estos cuando se requiera. Requisitos mínimos: • Ciclo de grado medio o superior en mecatrónica industrial, electromecánica o similar. • Experiencia demostrable como técnico/a electromecánico/a en entornos de construcción, industriales, maquinaria de obra pública o similar. • Conocimientos en grupos electrógenos (se realizará una prueba específica) • Capacidad para trabajar de forma autónoma y con orientación a la calidad. Ofrecemos: • Contrato de 6 meses con conversión a indefinido. • Salario competitivo, en función de la categoría y experiencia aportada. • Plan de carrera y desarrollo así como formación puntera en grupos de nueva generación • Acceso a retribución flexible (tickets restaurante, transporte, guardería...) una vez indefinido • Tarde libre el día de tu cumpleaños. • Horas: 40 semanales. Horario de lunes a viernes, con tarde de los viernes y fines de semana libres. En Loxam valoramos la diversidad y fomentamos un entorno laboral inclusivo. Todas las candidaturas serán consideradas sin distinción de género, edad, origen, orientación sexual o discapacidad. Animamos especialmente a postular a personas con discapacidad o en situación de vulnerabilidad para que encuentren un trabajo adaptado a sus intereses, motivaciones y necesidades.

A global technology leader in energy solutions seeks a Power Validation & Certification Engineer in Bollullos de la Mitación, Spain. Puede obtener más detalles sobre la naturaleza de esta vacante y lo que se espera de los solicitantes leyendo la información a continuación. You will be critical in validating power electronics and control systems for renewable energy projects. The role requires a Bachelor's in Engineering, solid experience in electronic product validation, and proficiency in Spanish and English. xcskxlj Join a leading firm committed to a sustainable energy future and enjoy the opportunity to work across the entire product development lifecycle. #J-18808-Ljbffr

A leading energy solutions company is seeking an R&D Control Engineer in Bollullos de la Mitación, Spain. Lea el resumen de esta oportunidad para comprender qué habilidades, incluidas las habilidades interpersonales relevantes y el dominio de paquetes de software, se requieren. This role involves developing and commissioning advanced control solutions for power converters and energy storage systems. You will engage in system stability studies, develop control algorithms, and collaborate with diverse teams. Ideal candidates will have a degree in engineering, proficiency in C/C++ and Python, and expertise in grid control concepts. xcskxlj Join us in advancing a sustainable energy future. #J-18808-Ljbffr