Engineering jobs in Bradford-on-Avon - Page 3Create job alerts

UPS Maintenance Engineer Apply promptly! A high volume of applicants is expected for the role as detailed below, do not wait to send your CV. Vacancies in Surrey, Somerset, South Yorkshire Were working with an industry-leading UPS specialist that is looking to add an experienced UPS Maintenance Engineer to its field service team. This is a great opportunity for an engineer with strong experience across UPS systems, critical power, commercial BESS, batteries and electrical maintenance to join a highly respected business with a strong reputation in the market. The Role As a UPS Maintenance Engineer, you will be responsible for servicing, maintaining and fault finding on UPS systems and commercial battery energy storage systems across client sites. You will work on a range of critical power equipment, supporting customers with planned maintenance, reactive callouts and technical support. Responsibilities • Service, maintain and repair UPS systems across customer sites, • Work on commercial BESS assets, including maintenance, inspections and fault finding, • Carry out planned preventative maintenance and reactive maintenance, • Diagnose and repair faults on UPS systems, batteries and associated electrical equipment, • Complete battery inspections, testing and replacements, • Carry out site surveys, reports and service documentation, • Provide technical support and advice to customers, • Work safely in line with company procedures and electrical regulations, • Experience working on UPS systems, critical power, standby power or similar electrical equipment is essential, • Commercial BESS experience is essential, • Strong electrical maintenance and fault-finding skills, • Experience with batteries, switchgear, power electronics or generators would be beneficial, • Electrical qualification such as NVQ Level 3, City & Guilds, HNC/HND or equivalent, • 18th Edition xrnqpay would be beneficial, • UPS manufacturer training would be advantageous, • Full UK driving licence is essential, • Comfortable working in a field service role with travel to customer sites, • Right to work in the UK is essential for this rolePackage, • £45,000pa + OT, • Company vehicle + Fuel Card, • Overtime opportunities, • Callout allowance, • Pension, • Training and development

Carding Maintenance Engineer Shifts: Days (M - F) or Shift Based considered Do you have the following skills, experience and drive to succeed in this role Find out below. Salary: circa £60,000 (+ up to £8,000 relocation support) Somerset Are you a time-served engineer with hands-on carding experience? Do you understand fibre behaviour, machine tolerances and the fine adjustments needed to keep carding lines running smoothly? Yolk Recruitment are supporting a rapidly growing textile manufacturer who have increased turnover by more than 150% in five years. With continued investment across the site, they're looking for a Carding Maintenance Engineer to support with carding machinery performance, reliability and quality. This is a rare opportunity to relocate to the South West and join a specialist process-driven manufacturer where your carding experience genuinely matters. This is what you'll be doing You'll be responsible for maintaining, repairing and optimising a range of carding machinery and fibre-processing equipment. Your work will ensure stable production, consistent web formation and minimal downtime. Responsibilities include: 1. Carrying out planned preventative maintenance (PPM) on carding machines, 2. Responding to mechanical and electrical breakdowns across the carding lines, 3. Diagnosing faults on cylinders, strippers, doffers, workers, lickers-in, feed systems and delivery sections, 4. Performing alignment, clearance setting, tensioning and fine adjustments to maintain fibre flow and web quality, 5. Working on machinery such as Trtzschler, Spinnbau, Herguth, TAM or similar carding equipment, 6. Supporting rebuilds, strip-downs and card clothing changes as required, 7. Collaborating closely with production teams to resolve quality issues and improve machine performance, 8. Contributing to root cause analysis, asset care and continuous improvement activity, 9. Sharing knowledge with apprentices, fellow engineers and operators to build internal capability, 10. Ensuring all work is completed safely and in line with company procedures Experience & Qualifications Essential: • Proven hands-on experience with carding machinery (standard cards, strippers, or equivalent), • NVQ Level 3 or equivalent in Mechanical Engineering, • Strong mechanical fault-finding and strip-down ability, • Good electrical awareness (motors, sensors, drives, inverters), • Experience working within textiles, nonwovens or fibre-processing environments, • Ability to work independently and diagnose machine performance issues, • Understanding of web formation, fibre movement and carding tolerances Desirable: • Experience with Trtzschler, Spinnbau, Herguth, TAM or similar brands, • Apprenticeship in carding or textile engineering, • Exposure to continuous improvement or reliability projects And this is what you'll get in return: • £60,000 basic salary, • Up to £8,000 relocation support for candidates moving to the Bridgwater area, • 22 days holiday + 8 bank holidays (rising to 25 with service), • Christmas & New Year shutdown, • Pension - 4% employer / 5% employee, • Full company uniform, • On-site parking, • Access to Wellbeing 360 - discounts, GP services, wellbeing tools and more, • Bike2Work scheme, • A secure long-term role with a financially strong and growing manufacturer Are you up to the challenge? If this sounds like the right fit, I'd love to hear from you. Please get in touch today with engineering specialist recruiter Liam Reid. Apply with your CV - and feel free to include a short note about your experience with carding machinery. We also offer a referral scheme if you know someone suitable. Please note: due to the high volume of applications, we may not be able to contact everyone. xrnqpay If you haven't heard back within 7 days, please assume you have not been shortlisted on this occasion.

Role: Pump Service Engineer The following information provides an overview of the skills, qualities, and qualifications needed for this role. Location: Bristol Salary: Up to £45,000 depending on experience Our client is looking for an experienced Pump Service Engineer to join their busy team. You will be responsible for the installation, maintenance, fault-finding, and repair of a wide range of electrical pump systems across commercial, industrial, and residential sites. This is a field-based role requiring strong technical ability, excellent problem-solving skills, and a customer-focused approach. Responsibilities include: • Service, maintain, and repair electrical pump systems (including submersible, booster, and wastewater pumps), • Diagnose electrical and mechanical faults on-site, • Carry out planned preventative maintenance (PPM), • Install and commission new pump systems, • Complete accurate service reports and documentation, • Communicate effectively with clients and provide technical advice, • NVQ Level 2/3 (or equivalent) in Electrical Installation or Engineering, • 17th/18th Edition Wiring Regulations (preferred), • Proven experience working with pump systems or similar equipment, • Strong fault-finding skills in both electrical and mechanical systems, • Full UK driving licence, • Ability to work independently and manage workload effectively WR is acting as an Employment Agency in relation to this vacancy.

Job Title: FPGA Engineer Location: Bristol - Hybrid 3+ days on-site per week Role Type: Contract Duration: 12 months Rate: £60.00 - £80.00 per hour - Inside IR35 Our client, an established engineering consultancy, require an experienced FPGA Engineer to join their multi-disciplined team in Bristol. The FPGA engineer would be responsible for design and development of FPGA designs using VHDL and verifying designs using VHDL or System Verilog. UK citizenship is mandatory to be able to clear the background checks and obtain SC clearance. Current valid SC clearance would be an advantage. What the role of the FPGA Engineer entails: The FPGA engineer would work closely with Systems, Hardware and Software teams to provide FPGA solutions and solve integration problems on complex systems. • Creating innovative and robust VHDL-based designs, • Documenting and recording deliverables, • Verifying FPGA designs, • Ensuring configuration management/keeping designs under revision control, • At least 5 years' experience of developing FPGA using VHDL or Verilog, • Experienced with Mentor Graphics FPGA development tools including HDL Designer, ModelSim / Questa and Precision, • Familiar with Xilinx / Intel (Altera) / Microsemi (Actel) design flows (ISE, Vivado, Quartus) and third-party synthesis tools, • Experience in specifying timing and area constraints for efficient FPGA Place and Route., • Independent verification using VHDL, • Experience of FPGA requirements capture and requirements management tools, • A good understanding of FPGA version control and revision control software, • Experience of making technical decisions and mitigating technical risk for FPGA design activities., • Ability to coordinate day to day technical activities, liaising closely with the Project Engineering Lead / Lead FPGA engineer & other disciplines, • Excellent communication (oral & written) & interpersonal skills, • Ability to analyse system and / or hardware level requirements and derive detailed FPGA requirements, • De-bugging FPGA designs and supporting integration & verification at hardware, • and system level, • Experience with High-Speed Serial protocols and implementations, • Linux and scripting experience Services advertised by Gold Group are those of an Agency and/or an Employment Business. Hit Apply below to send your application for consideration Ensure that your CV is up to date, and that you have read the job specs first. We will contact you within the next 14 days if you are selected for interview. xrnqpay For a copy of our privacy policy please visit our website.

Field Service Engineer CHP / Biogas Maximise your chances of a successful application to this job by ensuring your CV and skills are a good match. South West Up to £44,000 + Overtime + Benefits Urus Recruitment are currently recruiting for a Field Service Engineer to join a growing renewable energy business. This is an excellent opportunity for an experienced Field Service Engineer looking to work on CHP and gas engine systems. The Role Field Service Engineer As a Field Service Engineer, you will: • Carry out service, maintenance and repair as a Field Service Engineer, • Work on CHP and gas engines as a Field Service Engineer, • Attend breakdowns and carry out fault finding as a Field Service Engineer, • Complete planned preventative maintenance (PPM) as a Field Service Engineer, • Diagnose mechanical and electrical faults as a Field Service Engineer, • Travel to client sites across the South West as a Field Service Engineer, • Experience working as a Field Service Engineer or similar, • Strong mechanical engineering background (ideal for a Field Service Engineer), • Experience with engines, generators or power generation equipment, • Fault-finding experience as a Field Service Engineer, • Basic electrical knowledge (desirable for a Field Service Engineer role), • Salary up to £44,000 for the right Field Service Engineer, • Overtime available for all Field Service Engineers, • Door-to-door travel paid, • Company vehicle provided for the Field Service Engineer, • Pension and private healthcare, • 24 days holiday + bank holidays Apply now if you are a Field Service Engineer looking for your next opportunity.

Job Requirements Want to make an application Make sure your CV is up to date, then read the following job specs carefully before applying. Quest Global is an organisation at the forefront of innovation and one of the worlds fastest growing engineering services firms with deep domain knowledge and recognised expertise in the top OEMs across seven industries. We are a twenty-five-year-old company on a journey to becoming a centenary one, driven by aspiration, hunger and humility. We are looking for humble geniuses, who believe that engineering has the potential to make the impossible, possible; innovators, who are not only inspired by technology and innovation, but also perpetually driven to design, develop, and test as a trusted partner for Fortune 500 customers. As a team of remarkably diverse engineers, we recognise that what we are really engineering is a brighter future for us all. If you want to contribute to meaningful work and be part of an organization that truly believes when you win, we all win, and when you fail, we all learn, then were eager to hear from you. We are looking to expand our ILS Engineeringcapability in all levels of experience and are keen to hear from you if you feel youre ready to take the next step in your career. You must be a sole UK national who is able to achieve and maintain Security Check (SC) and Naval Nuclear Propulsion Information (NNPPI) security clearances for this role. Job Description As aMaintenance Task Analysis(MTA) Engineer, you will be supporting the supportability MTA activity for complex maritime systems, specifically UK Defence submarines. You will work as part of an extended team for the customer to ensure that the submarines systems can be maintained efficiently, safely, and with the correct resources. You will be working across several stakeholders and functions, taking raw engineering data and transforming it into the structured maintenance logic that will feed S1000DTechnical Publicationsand Spares Provisioning teams. Key Responsibilities: • Risk: Escalation and recording of Risks to ensure mitigating actions are captured in the ILS Risk Register., • Task Step Breakdown: Develop logical, step-by-step procedures for the removal, installation, and repair of components to enable the production of Maintenance Task Instructions (MTI) outputs., • Personnel & Skill Mapping: Determine the number of tradesmen, trade specialisms (e.g., ME, WE) and man-hours required for each task to inform the Navys manpower requirements. Qualifications & Experience • Degree or Level 3Engineering qualificationin Engineering or related discipline., • Standards: Deep understanding of Def Stan 00-600 and S3000L (Logistics Support Analysis)., • Experience and background: Proven and demonstratable experience in engineering supportability roles within a MoD environment., • Software: Hands-on experience with LSA software such as Eagle., • Stakeholder Engagement: Excellent communication andstakeholder engagementskills., • Have worked in or with UK Defence, specifically with Submarine or surface fleet experience. xrnqpay, • Familiarity with Def Stan 00-600 (ILS) and Def Stan 00-40/42 (AR&M).

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers and achieved sales of £3.35 2023. There are no limits to where you can take your career. Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. Please double check you have the right level of experience and qualifications by reading the full overview of this opportunity below. At our GKN Filton site, we specialise in the design and manufacture of large complex structural wing assemblies, detailed metallic componentsand wing systems for a combination of both civil and military aircraft. Our newMaintenance Engineerwill join a small & friendly team working effectively and efficiently on breakdown and repairs. The team handle the planned scheduled maintenance and all associated tasks on both conventional and CNC machine tools and plant. This is a permanent role. The successful applicant will work night shifts (7pm-7am) on a 17 week rota as below: 17 weeks of Wednesday - Friday & every other Saturday 17 weeks of Sunday - Tuesday & every other Saturday (3 on - 4 off, 4 on - 3 off) The night shift has an additional 38% shift allowance for the first 35 hours, and 58% for anything extra paid in addition to the basic salary. How You'll Contribute In this role, you will maintain and diagnose faults on: Machine tool/plant including: • Machine tool axes including linear guides / rails, motors, gearboxes, lead screws, bearings, • Machine guarding both internally and externally, • Hydraulic and pneumatic systems including counter balance circuits, hydraulic clamping, hydraulic motors, rams, cylinders, • checking and topping up various oils, fault finding & diagnostics on complex Machine tools/plant as well as diagnosing faults on rails, gearboxes etc Machine alignments by: • Checking and correction of machine alignments, by clocking bars, datum holes and slip gauges, laser alignments, ball bar tests, • Correction by changing parameters in CNC. control, testing with machine cuts/machine cycles Plant: • Knowledge of machine tools electrically, • Knowledge of machine parameters and diagnostics, • Ability to run calibration programmes, • How to disconnect pumps & motors Essential: • A demonstratable background in maintaining 4/5 axis CNC milling machines, • Previous experience in cross functional team working, • Experience in a similar maintenance lead role, • Previous experience working night shifts, • IOSH/NEBOSH qualifications ? Competitive salary of circa £40,000 (Dependent on experience) + 38% - 58% shift allowance (Total salary circa £55,000) ? Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis ? Life Assurance 8 x salary ? 175 hours annual leave + bank holidays ? Income protection ? Shopping discounts ? Cycle To Work Scheme ? Employee Assistance Programme ? Virtual GP Clinic for you and immediate family ? A collaborative, dynamic working environment with significant opportunity to upskill As well as a competitive package well offer you a world of opportunity. We want to see your career fly! Well support your career progression by providing you with learning and development opportunities. Thats the beauty of being part of a global business, once youre on board you never know where you career journey may take you! Well offer you fantastic challenges and amazing opportunities. xrnqpay This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go?

Installation Engineer (Medical Equipment) Apply promptly! A high volume of applicants is expected for the role as detailed below, do not wait to send your CV. £32,000 - £35,000 (OTE £42K++) + Quarterly Bonus + Pension + Healthcare + Training + Progression + + Company Van + Company Benefits + 23 Days Holiday Weston-super-Mare / Bristol / Swindon Are you an Installation Engineer or similar with experience installing any sort of technical equipment? Are you looking to work for a company offering door-to-door pay, plenty of training and the opportunity to progress into a senior role? On offer is the opportunity to join a company that specialises in installing, servicing and maintaining healthcare equipment in hospitals, schools and care homes. Since they were established in 1985, they have seen significant organic growth and are looking to increase the size of their engineering team. In this role, you will be working as part of a team and independently, covering the West and South of the UK, visiting customer sites, and carrying out the installation of ceiling track hoists. This role would suit a Field Service Engineer looking to make the step into the medical industry with further training, the opportunity to progress and excellent overtime rates, the role will require regular overnight stays. The Role: • Installation of ceiling track hoists, • Ensure that high standards in the work area are maintained, • Ensure relevant documentation is completed and authorised, • Working as part of a team and independently, • Further training from Senior Engineers, • Monday to Friday,, • Clean Driving licence, • Mechanical installation experience in similar environments, • Experience of using all types of hand power tools

Installation Engineer (Track Hoists) Below, you will find a complete breakdown of everything required of potential candidates, as well as how to apply Good luck. £32,000 - £35,000 (OTE £42K++) + Quarterly Bonus + Pension + Healthcare + Training + Progression + + Company Van + Company Benefits + 23 Days Holiday Weston-super-Mare / Bristol Are you an Installation Engineer or similar with experience installing any sort of technical equipment? Are you looking to work for a company offering door-to-door pay, plenty of training and the opportunity to progress into a senior role? On offer is the opportunity to join a company that specialises in installing, servicing and maintaining healthcare equipment in hospitals, schools and care homes. Since they were established in 1985, they have seen significant organic growth and are looking to increase the size of their engineering team. In this role, you will be working as part of a team and independently, covering the West and South of the UK, visiting customer sites, and carrying out the installation of ceiling track hoists. This role would suit a Field Service Engineer looking to make the step into the medical industry with further training, the opportunity to progress and excellent overtime rates, the role will require regular overnight stays. The Role: • Installation of ceiling track hoists, • Ensure that high standards in the work area are maintained, • Ensure relevant documentation is completed and authorised, • Working as part of a team and independently, • Further training from Senior Engineers, • Monday to Friday,, • Clean Driving licence, • Mechanical installation experience in similar environments, • Experience of using all types of hand power tools

Electronics Field Service Engineer The information below covers the role requirements, expected candidate experience, and accompanying qualifications. * An excellent opportunity for service engineers from a range of backgrounds (including photocopier and ATM) to get their first role within the medical field service sector* • Overall Earnings £38,000, • Basic Salary £35,000, • Bonus 10%, • Company Car or Car Allowance, • Pension (5% employer contribution), • Healthcare, • Phone, Laptop and iPad, • 27 Days Holiday Plus Bank Holidays, • Company Credit Card This market leader seeks to recruit a technically motivated and customer focused Electronics Field Service Engineer, responsible for: • The service, installation, breakdown, repair and calibration of a wide range of sophisticated medical laboratory diagnostics systems, utilised within pathology departments, NHS laboratories and clinical chemistry environments To succeed in this exciting role, you must be able to demonstrate: • A competent background in a customer facing field service engineering capacity gained within any high value capital equipment environment, • Applications are encouraged from engineers with a broad range of backgrounds, including photocopiers, ATM, ex forces engineers (medical & dental, weapons systems, radar) and a wide range of other electronic or electro-mechanical sectors, • A qualification in engineering, electronics or a science based subject to a minimum of ONC level, City & Guilds or NVQ, • Well respected supplier of sophisticated medical diagnostics systems, trusted by healthcare professionals to accurately diagnose and test patients for a wide range of medical conditions and diseases, • This instantly recognisable brand leader supplies a wide range of innovative diagnostic based laboratory and medical systems to the healthcare sector, and offers 'best in class' solutions across their range of products and systems, which include applications for microbiology, immunodiagnostics, molecular diagnostics and blood bank screening

Job Description Please read the information in this job post thoroughly to understand exactly what is expected of potential candidates. Sysco are currently recruiting for a onsite Services Engineer to join the Belfast, Ireland Technology team reporting to the Services Engineer Manager. This position will be responsible for delivering Sysco technology services support located at sites within their designated region. The primary responsibilities of this position are related to the ongoing support of technology in the field to include, but not limited to workstations, output devices, (Printers and Multifunction Printers), software license compliance, security compliance, and hands-on support of IT infrastructure in the field in an overall objective to ensure a consistent technology experience across their region. Key Accountabilities & Responsibilities: • Provide technical support to Sysco operating sites across the designated region., • Ensure adherence to IT standards and provide the highest level of overall customer satisfaction., • Assist in ensuring accurate inventory of IT assets across their region., • Responsible for keeping business and IT management informed and escalating impactful issues on a timely basis as required., • Maintain accurate asset inventory of IT hardware, including but not limited to Laptops, Desktops, Printers, Networking hardware including switches, routers and access points, mobile phones, tablet devices, UPS and Comms Room Air Conditioning, • Maintains documentation of support related issues., • Responsible for their continual improvement including uptake of training opportunities for professional and career development. To be successful in this role you will have considerable customer service experience in Computer Technologyand be proficient at technical troubleshooting of desktop and laptop computers, mobile technology devices, Microsoft Windows, Office 365, MacOS, VMWare Workspace One and other desktop software.You will be able to use remote support tools to be able to troubleshoot remote computer devices and must be available for after hour support and weekend on-call support as needed. xrnqpay You will be a resourceful, reliable and trustworthy person whos accurate with numbers and able to use mathematical formulas within spreadsheets with excellent communication skills, (both written and verbal), organisational, presentation and problem-solving skills.

Analytics & Data Quality Engineer T-SQL, Data Analytics, ETL/ELT, Data Quality, Microsoft Fabric, Power BI, Python, Remote, UK (1-Year FTC) £50,000 - £65,000 + Benefits This is an excellent Analytics & Data Quality Engineer opportunity to join a growing, data-driven organisation, on a 1-year FTC, supporting the development of a modern data platform built on Microsoft Fabric, while driving improvements in data quality, integrity, and reliability across multiple source systems. The Analytics & Data Quality Engineer is a remote working role, with occasional travel to London for team meetings. Initially a 1-year FTC, with potential to transfer to permanent. . Key Skills as Analytics & Data Quality Engineer: • Strong experience with T-SQL and complex data querying., • Proven background building ETL/ELT pipelines and data integrations., • Experience working with Microsoft Fabric or similar modern data platforms., • Some working knowledge of Python for data processing and validation., • Experience with Power BI or comparable reporting tools., • Strong focus on data quality, validation, and data integrity. Key Skills: T-SQL, Data Analytics, ETL/ELT, Data Quality, Microsoft Fabric, Power BI, Python, UK (Remote Occasional Travel) This is a 1-year FTC opportunity. You must have proven experience with T-SQL, ETL/ELT pipelines, and a strong focus on data quality and validation is essential. You must be willing for some occasional travel to London, as required. xrnqpay Please double check you have the right level of experience and qualifications by reading the full overview of this opportunity below. Remote working/work at home options are available for this role.

Job Profile for AHU Engineer - SEL46410 Check you match the skill requirements for this role, as well as associated experience, then apply with your CV below. Position: AHU Engineer Location: Gloucestershire, Bristol and South Wales Salary: £40-42k plus door-to-door travel pay Our client is a global manufacturer who designs, manufactures, and supplies climate control solutions. Due to continued growth in the UK market, they are looking for an AHU Engineer to join their team. As the AHU Engineer, you will be responsible for carrying out PPMs, repairs, breakdowns and refurbishing and commissioning on AHU systems throughout commercial buildings, leisure centres, schools and swimming pools. Day to day, the main region will be covering Bristol, Gloucestershire and South Wales. At times you will be required to travel nationally; however will be kept within a set region. Job Requirements • Experience in servicing, repairing and refurbishing Air Handling Units, HVAC systems, and ventilation units., • Based between Gloucester and Bristol. Able to travel to Wales at times., • Strong diagnostic skills for troubleshooting and servicing complex systems., • Confident in controls and a range of controllers, • F-Gas Cat 1, • City & Guilds in Air Conditioning & Refrigeration, • Able to pass an enhanced DBS Salary & Benefits • Salary £40-42k, • Door-to door travel pay, • Company Van + Fuel card, • 25 days holiday + bank holidays, • Monday to Friday 37.5 hour week, • Pension, • Employee discount scheme, • Medicash Health Cash Plan (Incl. xrnqpay access to Mental Health Support), • Life assurance scheme, • Training and Development Opportunities

Morson is recruiting a Manufacturing Engineer for an initial 12 month contract with GKN Aerospace, the role is full time on site in Filton over 4 and ½ days with flexible start and finish times. There is a rate of up to £29.81 Per hour PAYE on offer for the successful candidate. To be considered for an interview, please make sure your application is full in line with the job specs as found below. Please find the job description below: Key Responsibilities • Responsible for the programme Change Management process to ensure all change is tracked, monitored, visualised, and incorporated into baselines, in line with agreed points of embodiment to customer requirements., • Coordinates the interaction between engineering, manufacturing, supply chain, operations, and program management to ensure appropriate changes are documented and approved, in line with all Export Control/ITAR requirements., • Ensures the maintenance and timely release of configuration baselines and records., • Collates and reviews change impact assessments to prepare for internal/customer Change Control Boards (CCB's), • Responsible for managing the Change Implementation Board (CIB) and Change Control Boards (CCB's), including the creation of Change Paperwork., • Works in accordance with customer Configuration Management (CM) Plan ensuring compliance and flow down of CM requirements to sub-tier suppliers, • Supports all tasks associated with both Configuration and Data management i.e., Administration of Internal and External databases., • Supports Modification planning activities and Condition of Supply (COS) creation., • Validate that all change documentation is clear, concise, valid, and has been executed correctly and the to-be released documents matches the intent of the change., • Application of Lean tools to business processes i.e., Visual Management, Scorecard, Root Cause Analysis, KPI's etc. Essential • Knowledge of and application of principles, practices applicable to ISO10007 and AS9100 standards, • Clear understanding of applied Configuration Management in Aerospace environment, • Highly proficient in the use of all MS Office Suite applications, • Proficient in the use of Product Data Management (PDM) applications (Windchill preferred), • Knowledge of product change management in complex organizations, • Proven Ability with CM process audits, • Must able to comply with Export Control and Nationality ITAR requirements, • Working knowledge of SAP, Windchill and Database packages. xrnqpay, • CAD Interrogator (CATIA V5 and V6), • Knowledge of Configuration Management model (CMII), • DOA / POA knowledge (EASA Part 21 Sub-part J & G)., • Strong minded and committed, able to embody vision and engage people in the delivery of that vision, • Project management experience

Canada Life UK looks after the retirement, investment and protection needs of individuals, families and companies. We help to build better futures for our customers, our intermediaries and our employees by operating as a modern, agile and welcoming organisation. Experience, qualification, and soft skills, have you got everything required to succeed in this opportunity Find out below. Part of our parent company Great-West Lifeco, Canada Life UK has operated in the United Kingdom since 1903. We have hundreds of respected and supported employees committed to doing the right thing for our customers and colleagues. Canada Life UK is transforming to create a more customer-focused business by providing our customers with expertise on financial and tax planning, offering home finance and annuities propositions, and providing collective fund solutions to third party customers. Job Purpose We're looking for an Azure Platform Engineer with strong experience in Kubernetes and an interest in platform abstraction and cloud-native infrastructure patterns. You'll help us design and build shared platform capabilities on Azure that hide complexity from product teams while enforcing security, reliability and governance by default. This role is ideal for an engineer who: • Enjoys working with Kubernetes and Azure, • Thinks in terms of platform APIs, abstractions and self-service, • Is curious about emerging control plane and infrastructure abstraction approaches, • Kubernetes as a core platform primitive, • GitOps, CI/CD and Infrastructure-as-Code, • DevSecOps and SRE-inspired practices, • AI-assisted engineering (Copilot, agents, automation) What You'll Do, • Build and operate Azure-backed platform services exposed through Kubernetes APIs, • Design abstractions that allow teams to provision infrastructure safely and consistently, • Work with AKS as a core runtime for platform and workload services, • Contribute to platform control plane capabilities (e.g. Kubernetes-based or API-driven approaches), • Define and manage Azure resources using Terraform, Bicep and declarative approaches, • Embed security, governance and policy into platform defaults, • Support GitOps-driven workflows and CI/CD pipelines, • Improve observability, reliability and operational readiness Who You Are Essential: • Experience in Azure, cloud engineering, DevOps or platform roles, • Hands-on experience with Kubernetes, • Infrastructure-as-Code experience, • Scripting (PowerShell, Bash or Python), • CI/CD and Git-based workflows Desirable:, • Experience with platform abstraction or control plane patterns (e.g. Crossplane, Pulumi, or similar approaches), • Kubernetes extension patterns or operators, • Terraform or Bicep, • Azure networking, identity and governance

Multi-Skilled Maintenance Engineer Please double check you have the right level of experience and qualifications by reading the full overview of this opportunity below. Bridgwater | £42,000 per annum + bonus | 37.5 hours per week | Shift-based Introduction Acorn by Synergie is recruiting a Multi-Skilled Maintenance Engineer to join a dynamic manufacturing environment. This essential role focuses on ensuring the continuous, safe, and efficient operation of production machinery, equipment, and site facilities through proactive maintenance, rapid fault resolution, and technical collaboration. Key Responsibilities • Execute planned preventative maintenance (PPM) across machinery and site infrastructure., • Respond promptly to equipment breakdowns and implement effective repairs., • Diagnose and resolve mechanical and electrical issues impacting production., • Collaborate with Manufacturing Systems Engineering and other departments to improve reliability and resolve complex faults., • Adhere to all safety regulations and site procedures., • Complete actions from the Corrective Action Report (CAR) system., • Communicate maintenance schedules and machine handovers effectively., • Support commissioning, upgrades, and configuration of machinery and facilities., • Maintain accurate records of maintenance activities, parts used, and fault analysis., • Time-served engineering apprenticeship with NVQ Level 3 or equivalent., • Proven experience in mechanical and electrical maintenance within a manufacturing environment., • Knowledge of 3-phase 415V electrical systems., • PC literate with experience using maintenance management systems (e.g. CMMS)., • Strong fault-finding and problem-solving skills., • Effective communication and decision-making abilities., • High attention to detail and a methodical approach., • Ability to work independently and as part of a team., • Hands-on experience with equipment design and build., • Alternating early and late shifts:, • Monday to Thursday: 6am - 2pm / 2pm - 10pm, • Friday: 6am - 1pm / 1pm - 8pm, • Approved overtime available. Apply now to join a manufacturing team where your technical expertise drives operational excellence. xrnqpay Acorn by Synergie acts as an employment agency for permanent recruitment.

Mobile Commercial Gas Engineer Is your CV ready If so, and you are confident this is the role for you, make sure to apply asap. Location Bristol and wider region including Cardiff Hours 40 hours per week Company Benefits: • Company vehicle (with option to personal use), • We pay door to door, • 23 days holiday rising up to 26 plus BH, • Employee discounts via Perkbox, • Access to a virtual GP and access to a health & wellbeing app, • Training & Development As a qualified Commercial Gas Engineer, you will: • Attend customer sites and effectively carry out gas and plumbing works as required.This will include reactive, planned maintenance, quoted works and installations., • Accurately use all company and client IT systems ensuring accurate & relevant information is recorded., • Undertake works as instructed by the Service Desk. Qualifications & Experience: CENWAT COCN1 CDGA1 ICPN1 CIGA1 CORT1 TPCP1A • Excellent Gas and Plumbing experience., • Other qualifications (OFTEC, IPAF, PASMA, Unvented) are a plus., • Strong reactive repair and diagnosis skills across a variety of gas and plumbing installation types. You will work 40 hours per week and you will have access to employee benefits that will be available to you as soon as you start. We are an equal opportunities employer who deliver facilities management services to clients all over the UK and with vacancies in your area this is a great time to join our teams. xrnqpay If this sounds like a job for you then click on the apply button and well start the process and if youre a good match well be in touch to discuss the next steps. This role will be working for JCW, who are part of the Apleona Group

About the job. Hit Apply below to send your application for consideration Ensure that your CV is up to date, and that you have read the job specs first. As part of the development of our Digital Services function, we are recruiting to strengthen our internal digital capability. These roles are central to building sustainable in-house expertise that supports the design, development, and delivery of digital solutions across the transport network. A key focus of this campaign is creating new opportunities. As a result, we are recruiting a Principal Machine Learning Engineer to play a leading role in shaping the future of digital services across National Highways. Our Digital Lab designs and manages innovative data products and services in-house, while building external partnerships and increasing adoption of our digital assets to improve customer journeys, support the Strategic Road Network, and enable emerging technologies such as connected and autonomous vehicles. As Principal Machine Learning Engineer, you will lead the strategic direction, risk management, and continuous improvement of production AI/ML products and services that support critical business decision-making. Working closely with Digital Services teams and senior stakeholders, you will define and deliver machine learning strategies that maximise adoption and unlock value from our £69 billion data assets. You will ensure solutions are commercially sustainable, technically robust, and designed around user needs and experience. This is a hybrid role based at any National Highways office location, with an expectation to attend the office for two days per week, including weekly travel to collaborate with the team • Lead the Machine Learning Engineering team in the safe and effective operation of AI/ML products and services in production, maximising the value and adoption of data-driven decision making across the business., • Own service performance and continuous improvement, ensuring robust IT Service Management, regulatory compliance, model risk management, ethical AI standards, and ongoing enhancements to user experience, efficiency, scalability, and cost of operation., • Define and deliver the AI/ML Ops platform strategy and roadmap, implementing modern engineering practices and leading-edge techniques to enable rapid, scalable, and cost-effective delivery of machine learning services., • Build and lead senior stakeholder relationships across directorates, working with Directors and business leaders to manage service performance, prioritise demand, shape delivery backlogs, and influence future digital strategy both internally and externally., • Strong stakeholder management and influencing skills, with the ability to build credible relationships at senior levels, navigate complex environments, and secure positive outcomes across multiple priorities., • Proven experience leading data innovation and systems integration, including developing and improving AI/ML products, platforms, or digital services that deliver measurable user and business value., • Strategic mindset with the ability to turn insight into action, using evidence, data, and organisational priorities to shape plans, inform decisions, and drive successful outcomes., • Excellent understanding of governance and risk management, with experience applying controls and standards across areas such as model risk, data governance, security, audit, and responsible or ethical AI. Here at National Highways, we manage and improve England's motorways and major A roads, helping our customers have safer, smoother and more reliable journeys. Our priorities are safety, customers and delivery, and at the core of this, are our values of passion, integrity, safety, teamwork and ownership. The Digital Services Directorate is helping to reshape the way National Highways operates by delivering digital, data, and technology services across all areas, from frontline to back office, in a modern and efficient manner. Our vision is to develop integrated information and technology that empowers our colleagues and provides real-time information to our customers, as well as integrating with intelligent vehicle and transport systems as they evolve, to enhance journey safety and reliability. External candidates will be offered a starting salary at the lower end of the pay scale, while current employees will be appointed in accordance with our established pay policy. xrnqpay We are committed to creating a diverse environment and welcome applicants from all backgrounds.

Engineering Apprentice Are you the right candidate for this opportunity Make sure to read the full description below. The Army - United Kingdom From £26,334 a year Want to get paid to learn skills for life? As a full-time soldier, entry-level Engineering role, youll: • Keep the Armys equipment working and ready to use, • Build bridges, repair roads, and rebuild infrastructure across the world, • Study for advanced trade qualifications in plumbing and electrical engineering To qualify, you must be between 16 years 6 months and 35 years 6 months and pass a basic fitness test. Set yourself up for life. During your initial training, youll earn £18,687, after which your salary will rise to £23,496. Youll also receive 30 days annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. From your very first day of training with us, youll be gaining transferrable skills skills that could set you up for life. You dont need to know how to do the job before you get here, because well give you all the entry-level training you need. Plus, youll get to travel the world, taking part in the Armys adventurous training, and spending dedicated time playing the sports you love. Get skills, get qualified, get confident. xrnqpay You Belong Here.

Safran is an international high-technology group, operating in the aviation (propulsion, equipment and interiors), defense and space markets. Its core purpose is to contribute to a safer, more sustainable world, where air transport is more environmentally friendly, comfortable and accessible. Safran has a global presence, with 100,000 employees and sales of 27.3 billion euros in 2024, and holds, alone or in partnership, world or regional leadership positions in its core markets. Be one of the first applicants, read the complete overview of the role below, then send your application for consideration. Safran is in the 2nd place in the aerospace and defense industry in TIME magazine's 'World's best companies 2024' ranking. Safran Electronics & Defense offers its customers onboard intelligence solutions allowing them to understand the environment, reduce mental load and guarantee a trajectory, even in critical situations, in all environments: on land, at sea, in the sky or space. The company harnesses the expertise of its 13,000 employees towards these three functions: observe, decide and guide, for the civil and military markets. Research and Development Engineer - Composite Analysis Banbury, Oxfordshire On Site Skills: Composites, FEA, Mechanical Analysis, Carbon Fibre, Filament Winding, NX, Solid Mechanics, Matlab, CAD, Resin Transfer Molding, Hand Calculations, R&D, Abacus, Looking after the people who make Safran great is our priority. We offer a range of flexible benefits designed to support you-both in and out of work, including: *Early finish on Fridays *Competitive salary and annual bonus and pay review *25 days' holiday + bank holidays *Strong Pension scheme - up to 10% Employer Contributions *Professional development, ongoing training, mentoring *Family-friendly and accessible workplace policies Safran - Here, we craft excellence together. At Safran, excellence is a journey - and we'd love you to be a part of it. As a trusted global leader in aerospace, defence, and space, we are proud to be a company where diversity, innovation, and opportunity come together to shape a sustainable future where we can all succeed together through a shared vision We are looking for passionate individuals to join our Research and Development team as a R&D Engineer - Composite Analysis at our Banbury site. At Safran, we understand that diversity and inclusion make teams stronger and more effective, and as an organisation, we are committed to fair and equitable employment practices for everyone. We also know that some candidates may be put off applying for jobs where they don't meet 100% of the criteria outlined in the advert, however, we encourage anybody to apply if you can demonstrate a variety of skills and experience relevant to the requirements of this role. Please let us know if you would like to discuss any reasonable adjustments to the application or hiring process that may better facilitate your participation. Your Role As an R&D Engineer working on the latest, novel composite products and processing techniques you will be joining a small but highly effective team of experienced Engineers. The environment is cutting edge, fast paced and challenging but you will be supported to work on some of the most innovative and leading projects and programs across a wide range of Aerospace applications. These products are primarily manufactured using techniques such as multi-axis high speed Filament Winding, High Pressure Resin Molding and various Braiding techniques. You will be engaged in the design, development and analysis of these structural composite components from 1st Principals and Hand Calculations, as well as FEA (Finite Element Analysis) including developing new models. xrnqpay As the team is small and efficient you will also have the opportunity to get involved with hands on testing to validate and use the iterative process to feedback in to design and development. What You'll Bring *Degree qualified in Mechanical Engineering, Aerospace Engineering or equivalent *Strong foundation in engineering mathematics and Solid mechanics and Stress Analysis *Able to analyse and solve new engineering problems using first principles and hand calculations *Experience in Matlab, Python or Excel for numerical modelling is highly beneficial *Experience in Finite Element software - Desirable *Some knowledge of composite materials would be highly beneficial *Highly motivated, with a keen ability to use own initiative *Willing to take hands-on approach to problem solving, development and testing methods *Clear open two-way communication skills

Join a Leading Facilities Management Team! A variety of soft skills and experience may be required for the following role Please ensure you check the overview below carefully. Are you a skilled Mechanical & Electrical (M&E) Engineer in or around the Tauntonarea, looking for an exciting opportunity in the facilities management sector? We are seeking a dedicated professional to carry out planned and reactive maintenance across a defined portfolio, ensuring top-quality service delivery and first-line response to emergencies. • £36,910 or £42,447 (depending on experience), • Full door-to-door pay, • Up to 4% bonus, • All overtime paid at time-and-a-half, • Company Van (with option for personal use from day 1), • 25 days annual leave + bank holiday equivalent, • Ongoing training & development opportunities at our National Training Centre, • Performing planned and reactive maintenance on M&E systems, • Diagnosing and resolving faults in electrical, mechanical, and HVAC equipment, • Ensuring compliance with health & safety regulations, • Providing technical support and expertise across multiple sites, • Liaising with customers to deliver outstanding service, • Supporting and mentoring apprentices and junior engineers, • Recognised apprenticeship or qualification in M&E services/maintenance, • Essential Qualifications: 18th Edition, • Desirable Qualifications: F-Gas, Test & Inspection, Unvented, • Previous experience in a similar role (retail or commercial experience preferred), • Valid UK driving licence (essential), • Strong problem-solving skills and ability to work independently, • This is a field-based role, requiring travel between client sites, • Generous pension scheme (up to 6% matched contributions) Apply today and be part of our dynamic engineering team!

AIR CONDITIONING ENGINEER COMPANY OVERVIEW Our client is seeking a highly skilled and motivated Air Conditioning Engineer to carry out mobile maintenance works across Bristol, Swindon, and Cardiff. Their client base includes, but is not limited to, commercial office blocks, industrial units, retail sites, and student accommodation. We are looking for a candidate with strong knowledge of Air Conditioning systems and over 5 years' experience in a similar Electrical / HVAC / Maintenance Engineering role. COMPANY USP's Comprehensive M&E Maintenance Coverage Are you ready to apply Make sure you understand all the responsibilities and tasks associated with this role before proceeding. Our client provides a full spectrum of building services maintenance, including critical, non-critical, and preventative solutions. Their services encompass mechanical, electrical, plumbing, HVAC, water hygiene, and fire safety systems, ensuring optimal building performance throughout their lifecycle. 24/7 Nationwide Availability With strategic offices and service centres across the UK, our client offers round-the-clock support 365 days a year. This nationwide presence ensures rapid response times and consistent service delivery, regardless of location. Tailored Solutions for Diverse Sectors Our client specialises in providing customised facilities management solutions across commercial, industrial, retail, and public service sectors, addressing the unique challenges and requirements of each environment effectively. JOB RESPONSIBILITIES Perform planned preventative maintenance (PPM) and reactive maintenance on air conditioning systems, including VRV/VRF, split systems, and AHUs. Diagnose and repair faults in HVAC systems to ensure optimal performance and energy efficiency. Conduct system inspections, pressure testing, and leak detection in accordance with F-Gas regulations. Work on electrical systems related to HVAC units, including control panels, wiring, and fault finding. Maintain compliance with health and safety regulations, ensuring all work meets industry standards. Provide excellent customer service while liaising with clients, site managers, and contractors. Keep detailed service records and complete job reports promptly. Travel across Bristol, Swindon, and Cardiff to attend commercial, industrial, retail, and student accommodation sites. QUALIFICATIONS / EXPERIENCE F-Gas & ODS Regulations (C&G 2 Minimum requirement. Approved Apprenticeship in Air Conditioning - Advantageous. Strong knowledge of M&E building services. Knowledge of HVAC plant: A/C, boilers, controls, heating & cooling systems, ventilation. Good overall understanding of Health & Safety. SALARY / BENEFITS £40,000 - 42,000 + Overtime (OTE £50k) 33 days holiday Travel Time: 30 mins each way, then x1.5 overtime on all additional travel On-Call: 1 in 4 (approx. xrnqpay ) Company vehicle and fuel card Pension scheme Health and wellness benefits Ongoing training & professional development Opportunities for career growth within the organisation Please call Tom on for more information, and apply to this advert to prompt call back.

Maintenance Engineer This isn't just another job - it's a chance to join a business that has invested heavily in its site and across the business, ensuring you have the tools, technology, and environment to do your best work. And because I value performance, bonuses are on offer, linked to company performance, which has been excellent over the past five years. What you'll be doing: * Carrying out first-fix reactive maintenance on a variety of production and packaging machinery * Diagnosing mechanical and electrical faults quickly and efficiently * Minimising downtime and ensuring smooth daily operations * Supporting continuous improvement projects and proactive maintenance strategies * Collaborating closely with engineering and production teams Salary: Experience working as a Maintenance Engineer * Relevant Engineering qualifications * Knowledge of Health & Safety regulations * Ideally experience in FMCG environments * Multi-skilled (mechanical/electrical) preferred * PLC experience would be a bonus Why join us? Applying for this role is straight forward Scroll down and click on Apply to be considered for this position. This is a business that invests in its people as much as its site, offering genuine opportunities to develop your career through hands-on training, mentoring, and progression. With excellent company performance over the past five years, you'll benefit from bonuses tied to our success, as well as being part of a collaborative, supportive team where your contribution truly matters. Excellent Pension contribution and annual bonuses! xrnqpay Interested? Submit your CV or give me a call on

HV Design Engineer To be considered for an interview, please make sure your application is full in line with the job specs as found below. Bristol £62-68 an hour 12 Month Initial Contract Essential Skillset: • Design HV and LV electrical systems for solar projects, • Produce and review Single Line Diagrams, • Manage grid connection applications and liaise directly with DNOs, • Strong understanding of Grid Code requirements including G99 and G100, • Specify primary plant including transformers, switchgear, protection systems, inverters, and metering, • Support protection design and relay settings in line with DNO requirements, • Review and respond to DNO technical queries and connection offers, • Provide technical support through procurement, FAT/SAT, commissioning, and energisation, • Ensure compliance with BS, IEC, ENA standards and project-specific requirements, • Support design reviews, xrnqpay risk assessments, and value engineering exercises, • Experience with grid modelling tools such as ETAP or similar, • Strong experience within solar PV, renewables, or power generation sector, • Degree qualified in Electrical Engineering (or equivalent experience)

Air Conditioning Engineer (Chillers / Hotel Sites) A variety of soft skills and experience may be required for the following role Please ensure you check the overview below carefully. £40,000 - £45,000 + Overtime + Van (Personal Use) + Flexibility + 33 Days' Holiday South West - Field-Based / Hotels & Commercial Sites Are you an Air Conditioning Engineer with chiller experience looking for an autonomous and flexible role covering high-end Hotels in the SouthWest for a family run company with lots of overtime to boost your earnings aswell as structured pay increases? Join a long-standing, family-run company servicing leading hotel chains across the South West carrying out PPM and repair work on AC, Coolers and Chillers - a role offering autonomy, stability, and work-life balance. No Microwave Why apply • Regional role - South West patch only , no national travel., • Autonomy - no clocking in; plan your own week and get the job done your way., • Earnings potential - regular overtime available to increase annual take-home., • Supportive employer - family-run business with long-term staff and modern vans with personal use. The role • Service, maintain and repair air conditioning systems across 4- and 5-star hotels (Hilton, Novotel, Mercure and others)., • Carry out PPM, diagnostics and repair work on chillers, AHUs, VRF/VRV, splits and cellar coolers., • Work independently across a regional patch, liaising directly with hotel management and the office team., • Complete accurate service reports and keep all work compliant and professional. You'll need • Proven experience as an Air Conditioning Engineer or HVAC Service Engineer., • Competence in chillers and/or cellar coolers (training provided for the right person)., • Knowledge of VRF/VRV, split and multi-split systems, and AHUs., • Comfortable working in live commercial or hotel environments., • Full UK driving licence (minor points considered)., • Polite, professional and self-motivated attitude. Package & Benefits • £40,000 - £45,000 basic salary (depending on experience), • Overtime available to increase earnings, • Company van (personal use permitted) + fuel card, • 33 days' holiday (including bank holidays), • 40-hour week with flexible scheduling, • Tools, equipment and uniform provided, • Family-run culture with long-term job security Interested? Click 'Apply' to be considered for this Air Conditioning Engineer position covering the South West region. xrnqpay All applications handled in confidence by Roundhouse Recruitment Ltd. Keywords: Air Conditioning Engineer, Chiller Engineer, HVAC Engineer, AC Engineer, Service Engineer, Maintenance Engineer, Cellar Cooler Engineer, Hotel Maintenance Engineer, VRF, VRV, Split Systems, Multi-Splits, Twins, AHUs, Building Services Engineer, Refrigeration Engineer, Air Conditioning Service Engineer, HVAC Technician, Air Conditioning Maintenance, South West, Bristol, Gloucester, Cardiff, Southampton, Exeter.

This is an excellent opportunity for a Biomedical Engineer with 3+ years of working in UK hospitals. You will need OEM certificates to demonstrate the training you have undertaken. Want to apply Read all the information about this position below, then hit the apply button. Your role: • Perform scheduled preventative maintenance (PM) on medical equipment as per manufacturer's guidelines, • Support the site manager / team leader as required and in achieving contractual KPI's., • Complete repairs as required on medical equipment as per manufacturer's guidelines, • Complete all associated administrative work in completing repairs and preventative maintenance a, • Support customers whenever needed to ensure minimal disruption to the operation of the hospital., • Complete associated admin needed to close repairs, • Maintain safe working practices within the hospital environment, • Maintain spare part stock wherever necessary, • Schedule and complete workload for customers within assigned area, • Maintain service documentation in line with business requirements, • Meet with OEM service staff and management when required, • Certified OEM trainings, • Qualification in Engineering, electronics or medical technologies such as biomedical engineering, desirably at xrnqpay Bachelors level or experience., • 1 year UK-based experience on medical equipment, • Familiarity with appropriate national and local regulatory standards, • Worked in clinical environment and involving patient communication, • Excellent customer relationship skills, • Excellent written and oral communication, • Good working knowledge of MS Office suite, Excel, • Superior integrity and discretion

Job Title: Commercial Catering Engineer For a complete understanding of this opportunity, and what will be required to be a successful applicant, read on. Location:Bristol & Surrounding Areas Salary:£42,000+ (depending on experience) + Overtime Job Type:Full-Time | Permanent Working Hours:Monday to Friday, 8:00 AM 5:00 PM (40 hours per week) The Opportunity We are working with a fast-growing and highly respected engineering business specialising in commercial catering, refrigeration, and foodservice equipment. Due to continued growth across the South West, they are now looking to recruit an experiencedCommercial Catering Engineerto cover Bristol and surrounding areas. The Role As a Commercial Catering Engineer, you will be responsible for the service, maintenance, and repair of a wide range of commercial catering equipment (gas and electrical), ensuring minimal downtime for clients. Key responsibilities include: • Service, maintenance, and repair of commercial catering equipment, • Fault finding and diagnostics across gas and electrical appliances, • Carrying out reactive and planned preventative maintenance (PPM), • Working on equipment such as ovens, fryers, grills, dishwashers, and refrigeration units, • Delivering excellent customer service and maintaining strong client relationships, • Salary from£42,000+ (DOE), • Overtime available, • Company van & fuel card, • Specialist tools provided, • Company credit card, • Monday to Friday schedule no weekend work required, • Minimum5 years experienceas a Commercial Catering Engineer, • Strong experience with bothgas and electrical catering equipment, • ValidCOMCAT gas qualifications(essential), • F-Gas certification(desirable), • Full UK driving licence (essential), • Clean licence preferred (no major points), • Ability to work independently and manage your own workload

Maintenance Engineer (Days) (Monday Friday) Apply fast, check the full description by scrolling below to find out the full requirements for this role. £40,000 - £50,000 + 33 Days Holiday + Progression + Days Based + Additional Company Benefits You will be based in or commutable from one of the following locations: Severn Beach, Bristol, Thornbury, Avonmouth, Clevedon. Other locations also considered. Are you a Maintenance Engineer with a mechanical and electrical skill set looking for a day-based role offering an excellent work-life balance within a company that is going through a period of significant investment? In this role you will work on both mechanical and electrical maintenance within a specialist manufacturing company who are going through a significant period of growth and investment. The company are established on a global scale and have chosen Bristol as their next location for further investment and expansion in the form of a new facility. As part of their expansion plans they are now looking to expand headcount. This role would suit an engineer with mechanical and electrical skills looking for a long-term permanent position. The Role: -Working on mechanical and electrical maintenance within a specialist manufacturing/processing site. xrnqpay -Monday Friday Days Based (8:30am 5:00pm/9:00am 5:00pm) -Further training and progression -Long-term permanent position The Person: -Previous experience in mechanical and electrical maintenance -Previous experience in a manufacturing, production, engineering, or similar environment -Any relevant experience or understanding of CAD software will be considered beneficial but not essential -Looking for a long term permanent position.

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers and achieved sales of £3.35 2023. There are no limits to where you can take your career. Job Summary At our Filton site, we specialise in the design and manufacture of large complex structural wing assemblies, detailed metallic components and wing systems for a combination of both civil and military aircraft. We are seeking a new CAM Engineer to join our Components Business - Machining team, where we undertake the manufacture of Metallic Aircraft components using a range of processes such as 4 / 5 axis to produce Hard and soft metal machining processes. The new Manufacturing Engineer will be experienced with CAM & Simulation software withknowledge of Siemens and Fanuc controls. Ensure you read the information regarding this opportunity thoroughly before making an application. The successful applicant will work a 4.5 day week, including flexi-time in a full-time permanent capacity, equating to a 35 hour week as part of a small team of Manufacturing Engineers. How You'll Contribute In this role, you will: • Be responsible for process & solution within our automated machining area, • Deploy these processes with a high degree of process capability utilizing the GKN standard Zero Defect Manufacturing (ZDM) tool suite to demonstrate as such, • Be responsible for technical support of manufacturing development and integration for production. Resolve issues pertaining to vendor quality, • Provide specialist knowledge to production activities with the ultimate goal of improving efficiency, product quality and the reduction of non-conforming parts, • Exemplify a safety-first mind-set and ensuring compliance with the GKN Aerospace Health, Safety and Environmental policies and standards, • Be responsible for the development of technical solutions to complex problems within GKN Aerospace, our customers and suppliers, • Deliver technical support of manufacturing process development and integration for production, • Utilize root cause analysis, preventative and corrective action to reduce/eliminate non-conformances, • Maintain positive, team relationships with internal and external customers, as well as co-workers Essential: • Usage of Catia v5 CAM and Vericut within a Manufacturing environment, • HNC/ONC in Manufacturing Engineering or relevant experience of multi-axis NC Programming, • Ability to read and understand engineering manufacturing drawings and technical documents, • Knowledge of, and ability to use and implement LEAN tools and techniques, • Competitive salary dependent on experience, • Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis, • Life Assurance 8 x salary, • 25 days holiday + bank holidays, • Flexible working hours & half day finish on Friday, • Income protection, • Shopping discounts, • Cycle To Work Scheme, • Employee Assistance Programme, • Virtual GP Clinic for you and immediate family Well offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles weve created a culture where everyone feels welcome to contribute. Its a culture that won us The Best Workplace Culture Award. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. xrnqpay Were also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We arethe place where human dreams, plus humanendeavour, shape the future of aerospace innovation and technology.?

CONTROLS / BMS / EMS ENGINEER UK (REMOTE/ PART TIME) £375 £425 per day (Outside IR35) | 23 Days per week| Contract or Permanent Option Please double check you have the right level of experience and qualifications by reading the full overview of this opportunity below. We are working with a leading engineering delivery specialist who are supporting over 40 live data centre projects across the UK and are looking to appoint an experienced Controls / BMS / EMS Engineer. This is a flexible opportunity offering a hybrid working model (23 days remote) with the option to remain on contract or transition into a permanent role long-term. You will play a key role in supporting the design, integration, and optimisation of BMS and EMS systems across multiple live and upcoming data centre projects. This is a great opportunity to work across a large portfolio of mission-critical sites, contributing to high-performance, energy-efficient environments. The Role • Support the design, configuration, and integration of BMS and EMS systems, • Work across multiple data centre projects providing remote technical support, • Assist with commissioning, testing, and optimisation of control systems, • Interface with site teams, commissioning engineers, and project stakeholders, • Troubleshoot and resolve controls-related issues across live environments, • Support energy monitoring, reporting, and system performance improvements, • Review technical documentation, drawings, and control strategies, • Ensure systems align with project specifications and client requirements, • Provide input into system upgrades, improvements, and innovation initiatives xrnqpay About You • Strong background in BMS / EMS / Controls Engineering, • Experience working on data centre or mission-critical projects, • Knowledge of HVAC controls, electrical systems, and automation, • Experience with systems such as Trend, Tridium, Siemens, Schneider, or similar, • Strong troubleshooting and fault-finding skills, • Comfortable working remotely while supporting multiple projects, • Good communication skills and ability to engage with site teams

Multi-Trade Electrical Engineer (FM – Mobile) Apply fast, check the full description by scrolling below to find out the full requirements for this role. Salary: £19.23 PAYE + Van + fuel card Location: Mobile role (Sommerset) We are recruiting for an experienced Multi-Trade Electrical Engineer to join a well-established Facilities Management (FM) provider, delivering maintenance services across a varied portfolio of commercial properties. This is a mobile role offering a great mix of electrical work alongside general building maintenance. The Role You will be responsible for delivering both planned preventative maintenance (PPM) and reactive works, ensuring client sites are safe, compliant, and fully operational. Key Responsibilities Carrying out PPM and reactive electrical maintenance Fault finding, testing, and minor installation works Supporting with general FM tasks including basic plumbing, carpentry, and fabric repairs Responding to breakdowns and completing repairs in a timely manner Ensuring compliance with health & safety and statutory regulations Building strong relationships with clients on-site Requirements NVQ Level 3 in Electrical Installation (or equivalent) 18th Edition Wiring Regulations Experience xrnqpay working within Facilities Management / Building Services Multi-trade experience (fabric, plumbing, basic carpentry) Strong fault-finding and problem-solving skills Full UK driving licence What’s On Offer £19.23 PAYE Company van & fuel card Overtime available 25 days holiday + bank holidays Stable role within a growing FM business

At the heart of Paxton, we are innovators, we look for ways of harnessing new technology to provide better solutions for our customers. We're a global brand with nearly 40 years of experience, our team of over 400 employees is spread around the world. Are you the right candidate for this opportunity Make sure to read the full description below. We pride ourselves on creating a vibrant environment, with a focus on excellent company culture. Our teams make Paxton a great place to work with brilliant benefits that come with any role at Paxton, with an emphasis on career progression, training and development, and recognition of achievement for every employee. So, what are the benefits? • We run a great social calendar with wine tasting, cooking classes, onsite yoga, staff parties, monthly internal events and more. Its rare you wont see something going on!, • Private medical insurance (Opt in) and healthcare cash-back plan with Health Shield., • Join a Carbon Neutral company Paxton is Carbon Neutral in the UK, France, Germany & South Africa!, • Modern offices, collaboration spaces, onsite mini-gym, and a gourmet café with subsidised food., • Discounted fitness memberships up to 75% off in your area with GymFlex., • Collaborative internal group initiatives like the Green Team, EDI Team, or the Charity Team., • Tech, bike, and travel or season ticket loans., • 25-days holiday plus bank holidays, and you can buy & sell up to 5 days a year. Join our Manufacturing Engineering team in Eastbourne , where youll deliver successful New Product Introduction (NPI) across electronics (PCA) and assembly manufacturing, acting as the key interface between Product Development and Manufacturing. • Lead end-to-end NPI activity, ensuring products are delivered safely, on time, to quality and cost targets, with full production readiness at launch., • Drive Design for Manufacture, Assembly and Test (DFM/DFA/DFT), embedding Right First Time (RFT), FMEA and defect prevention principles throughout the product lifecycle., • Ensure safe process design during NPI, supporting risk assessments, COSHH and compliance with HSE and ISO9001 requirements., • Define and optimise manufacturing processes, equipment, layouts, workflows and documentation, ensuring effective handover into production., • Identify opportunities to reduce cost, waste, complexity, rework and scrap through design and process optimisation, including support for CapEx decisions., • Work closely with Product Development, Quality, Operations and Manufacturing Engineering teams to resolve issues, prioritise workload and communicate progress across multiple projects., • Act as a manufacturing subject matter expert, supporting continuous improvement of NPI processes and mentoring junior engineers., • Experience in a similar NPI or Manufacturing Engineering role within electro-mechanical manufacturing., • Strong application of DFM principles and experience collaborating closely with design teams., • Confident working across multi-disciplinary and multi-site teams with clear, effective communication skills. We want to collaborate with you and hear your ideas, most of all, we want people to enjoy the journey with us. Take a look at what our team thinks of working here

Industrial Refrigeration Engineer Applying for this role is straight forward Scroll down and click on Apply to be considered for this position. Bristol £50,000 - £70,000 per annum A manufacturer of industrial refrigeration and sustainable cooling technologies, this company delivers end to end solutions including system design, manufacture, installation, commissioning and long-term service support for complex temperature-controlled environments. Using natural refrigerants like ammonia, focusing on energy efficiency and lifecycle performance, this manufacturer helps their customers reduce operating costs and carbon emissions while maintaining highly reliable cooling systems supported by a nationwide network of engineers and technical specialists. Key Responsibilities: Installation, service and maintenance work on customer sites Work on ammonia and CO2 refrigeration plants Maintain technical and safety standards Communicate with customers to ensure work is being carried out to their satisfaction Complete service reports and documentation accurately Package: Basic - £45,000 - £70,000 per annum (Dependant on experience) Overtime - 1.5x or 2x Door to Door & on-call pay 33 days annual leave Pension scheme Continuous training opportunities What You'll Need: F-Gas certification Experience in Industrial Refrigeration Experience handling natural refrigerants (Ammonia & Co2) Full driving license Interested in hearing more? Call Peter Caulfield on or Email WR HVAC | M&E are #1 recruitment partner for HVAC jobs. Our customers include a range of large and small M&E companies, manufacturers and suppliers of heating, ventilation, air conditioning and refrigeration equipment. We recruit UK wide for sales, management and technical jobs. xrnqpay WR is acting as an Employment Agency in relation to this vacancy.

Location: Bridgwater site based - 3 days per week and 2 days remote working/satellite office If your skills, experience, and qualifications match those in this job overview, do not delay your application. Status: Contract - Inside IR35 Duration: Currently approved thro to 31dec26 (renewable) Reports to: JDO Area Lead Morson Edge are working on behalf of a major player within the Energy Sector who have a current (contract) requirement for an Engineering Coordinator, to join their established site-based team in Somerset. This is a uniquely interesting opportunity to contribute towards one of Europe's largest infrastructure/construction Projects. If you're looking for a challenge and have the enthusiasm and exceptional stakeholder management skills this role will require, this could be the role for you! The Opportunity • As an Engineering Coordinator, you will ensure delivery of on-site engineering issues and changes within your designated area. You will be the driving force behind ensuring the successful completion of all pending tasks and construction updates within your assigned (site) buildings., • You will play a pivotal role in keeping the Project on track and in line with schedule ambitions Working as part of the Joint Design Office (JDO) you will: • Coordinate Engineers working in various technical teams and facilitate/unblock interfaces where multi-disciplinary support is required, • Monitor the performance of JDO for their respective area or discipline, using appropriate KPI and reporting., • Ensure all design and construction changes are delivered on time to meet Construction need., • Attend and participate in readiness reviews of Design Packages released for construction as and when required by design owners., • Work closely with the Design teams, Contractor and Construction teams to ensure quality technical responses (content/consistency/comprehensiveness/accuracy) and maintain construction programme and construction safety., • Typically degree qualified or equivalent experience in an Engineering Discipline (preferably Mechanical or Electrical), • You will have experience in construction engineering - if you've supported in the delivery of a large multi-disciplined project(s) this is a major bonus., • You should be able to bring your experience in design, drafting or construction to the table, • You will need excellent communication/interpersonal skills, presentation, influencing and stakeholder management abilities. xrnqpay, • Our client expects good technical knowledge and an ability to work with minimal supervision (technical or managerial) and be able to demonstrate a pragmatic and practical approach to issue management with strong compliance to procedures and safety., • You should be familiar with Contract Management, particularly CDM Regulations and be able to maintain accurate and timely records (whether systems, databases, spreadsheets)

Location:UK-wide (major rail hubs considered) Making sure you fit the guidelines as an applicant for this role is essential, please read the below carefully. Employer:Award-Winning Technical Consultancy Technical Assurance Engineer (Rail) - A role designed for someone who thrives at the intersection of engineering integrity, safety, and project delivery supporting rail and infrastructure programmes across the UK and internationally. The Opportunity Our client is a respected, award-winning consultancy known for delivering high-quality engineering and assurance expertise across major rail and infrastructure projects. They are expanding their Technical Assurance capability and are seeking aTechnical Assurance Engineerwho can bring structure, clarity, and technical confidence to complex, multi-disciplinary programmes. This position plays a pivotal role in ensuring that designs, systems, and assets meet the required standards, regulations, and safety expectations throughout the project lifecycle. Key Responsibilities • Leading and coordinating technical assurance activities across rail and infrastructure projects., • Developing and maintaining assurance strategies, plans, and compliance documentation., • Ensuring engineering requirements are met, evidenced, and traceable from design through to commissioning., • Supporting audits, technical reviews, and safety assessments., • Working collaboratively with design, engineering, construction, and testing teams., • Providing guidance on standards, governance, and assurance frameworks (e.g., NR/L2, CSM-RA, ROGS). The role coversall aspects of rail assurance, but candidates with signalling experience (whether in design, testing, systems, or integration) will bring additional insight that is highly advantageous. Not essential, but a strong differentiator. What Youll Bring • Experience in technical assurance within the rail or wider infrastructure sector., • Understanding of assurance frameworks, safety processes, and regulatory requirements., • Ability to interpret complex engineering information and translate it into clear assurance evidence., • Strong communication skills and confidence working with multi-disciplinary teams., • A structured, methodical approach with the ability to challenge constructively., • The chance to work on high-profile UK and international rail projects., • A supportive consultancy environment that values technical excellence and professional growth., • Opportunities to develop your assurance expertise across multiple disciplines. xrnqpay If youre ready to take the next step in your assurance career and want to contribute to projects that shape the future of rail and infrastructure, wed love to hear from you. Send your CV or get in touch for a confidential conversation.

Remember to check your CV before applying Also, ensure you read through all the requirements related to this role. Cloud Platform Architect (AWS) Location: Bristol or London (hybrid, typically 1 day per week) Type: Permanent Salary: £90,000-£120,000 Key words: AWS, Cloud Architect, Cloud Platform Architect The Opportunity I am working with a key customer of mine in the financial services sector who are building a new Cloud Platform Architecture capability. As a result they are looking for an experienced AWS Cloud Platform Architect to join them in a brand new postiion to play a pivotal role in shaping the future of their technology landscape. This is not a traditional architecture role. You'll combine strategic platform architecture with hands-on technical leadership, working closely with engineering teams to modernise an enterprise, regulated environment and drive the migration from legacy on-premise platforms to AWS. You'll join a small, growing team of cloud platform architects with a high degree of autonomy and genuine influence over cloud strategy, standards, and execution. What You'll Be Doing • Owning and evolving the architecture, maturity and roadmap of AWS cloud platforms, aligned to broader digital strategy, • Defining and maintaining cloud reference architectures, principles, guardrails, blueprints and patterns, • Working closely with cloud platform engineering to shape roadmaps and support delivery, • Leading and contributing to solution architecture for legacy-to-cloud migrations, including complex on-prem environments, • Acting as a senior technical authority, able to engage confidently with engineers, architects, senior stakeholders and executives, • Partnering with security, risk and compliance teams to ensure secure, resilient and cost-effective platforms in a regulated context, • Engaging with AWS as a strategic technology partner, influencing and shaping the relationship You'll be a credible, hands-on architect with deep AWS experience and the ability to operate across strategy, design and delivery. Essential experience: • Strong, current hands-on AWS architecture expertise across services such as EC2, EKS, Lambda, networking, storage, backup and recovery, • Experience designing and migrating enterprise-scale, regulated platforms (financial services, utilities, government or similar), • Background in platform and infrastructure architecture, not just high-level strategy, • Proven experience with legacy modernisation and data centre / on-prem to cloud migration, • Ability to engage at all levels - from whiteboard conversations with engineers to discussions with senior leaders, • Exposure to both AWS and Azure environments, • Experience working with large engineering teams across multiple locations, • Major opportunity to shape cloud architecture from the ground up, • High visibility and genuine ownership in a critical transformation programme, • A role that blends strategy, design and hands-on technical leadership Reasonable Adjustments: Respect and equality are core values to us. We are proud of the diverse and inclusive community we have built, and we welcome applications from people of all backgrounds and perspectives. xrnqpay Our success is driven by our people, united by the spirit of partnership to deliver the best resourcing solutions for our clients. If you need any help or adjustments during the recruitment process for any reason, please let us know when you apply or talk to the recruiters directly so we can support you.

Senior Solution Architect (Digital Consulting) Home working + 1 day per week on site in Bristol + occasional client visits Salary Up to £80k + bens Eligibility for UK Security Clearance (SC) A growing strategy, operations and digital consultancy is hiring a Senior Solution Architect to design and deliver secure, scalable digital solutions. You'll translate business needs into robust architectures, lead delivery teams, and shape digital transformation programmes across complex client environments. You'll bring • TOGAF certification and strong enterprise architecture experience, • Expertise across business, data, application, security & technology architecture, • Proven delivery of cloud-native solutions (Azure), • Strong background in secure system design, governance and risk management, • Experience working in Agile/DevOps environments, • Understanding of governance processes, architecture boards and compliance standards, both within TOGAF'S Governance Framework and aligned with DDAT and GDS standards, • Excellent stakeholder communication and data modelling skills, • Demonstrable experience in mentoring/leading/managing Make sure to read the full description below, and please apply immediately if you are confident you meet all the requirements. High-impact digital programmes, real influence over technical direction, and a people-first culture with strong rewards. Benefits snapshot ? 26 days leave (incl. your birthday) + bank holidays - rises with service (27 days after three years, and 28 after seven years) - You'll also get five extra days for your five and 10 year anniversaries! ? Private medical insurance/Pension ? Performance awards ? xrnqpay Annual training week abroad + funded qualifications RSG Plc is acting as an Employment Agency in relation to this vacancy.

Recruit4staff are representing a leading food manufacturing business in their search for a Multi-Skilled Maintenance Engineer to work in Bridgwater Any additional information you require for this job can be found in the below text Make sure to read thoroughly, then apply. Job Details: • Pay: Up to £53,000 per annum + Company performance bonus, • Hours of Work: 4 on 4 off (7am – 7pm, 2 days / 2 nights), • Duration: Permanent Essential Skills, Experience, or Qualifications: • Experience within the FMCG industry, • Proven experience working on fast-moving machinery, pumps, valves and PLCs, • Strong electrical and mechanical fault-finding skills (HNC level or equivalent), • Food manufacturing background, ideally within dairy, • Additional qualifications such as HNC, IOSH or NEBOSH Similar Job Titles: Mechanical Maintenance Engineer, Mechanical Engineer, Shift Engineer, Maintenance Engineer, Engineering Technician, MSE For further information about this and other positions please apply now. This vacancy is being advertised on behalf of Recruit4staff who are operating as a recruitment agency, agent, agencies, employment agency or employment business.

Thrive Trowbridge are delighted to be working with our client near Chippenham who are actively looking to recruit an Assembly Engineer on a permanent basis. Make sure to read the full description below, and please apply immediately if you are confident you meet all the requirements. What you will be doing: • Assembly of a range of products ensuring they are built to high standards of precision and quality, • Working from technical drawings to assemble complete units, • Testing of assembled systems, identifying and rectifying faults where necessary, • Ensuring components are clean and ready for despatch What you will need to succeed:, • Experience within a heavy engineering environment essential, • A good eye for detail and the ability to solve problems and plan ahead, • Ability to read and interpret technical drawings and documents, • Hydraulics, pneumatics and diagnostics experience beneficial, • Excellent communication skills as you will be dealing with a variety of individuals, • Mechanical or Electrical Engineering Level 3 or equivalent What you will receive in return:, • Competitive salary, • Full time Monday to Friday including early finish on a Friday!, • The opportunity to join a progressive and innovative company with a diverse product portfolio

IAM / Enterprise Identity Architect Increase your chances of reaching the interview stage by reading the complete job description and applying promptly. Remote with Occasional Travel to London We are seeking an experienced Enterprise Identity Architect to support the strategic and delivery objectives of the Enterprise Identity function within a large, complex organisation. Role Overview You will help define and govern the Enterprise Identity architecture, shape the forward roadmap, and provide architectural leadership across key identity initiatives. This role combines strategic architecture ownership with hands-on project engagement. Key Responsibilities Define and maintain the Enterprise Identity target architecture Support the EI roadmap and transition planning from as-is to to-be Own and evolve EI architecture standards, patterns and decision records Act as design authority within Architecture Review Boards Manage EI architectural risks and issues, working closely with stakeholders Provide architecture leadership across key initiatives, including: Zscaler ZPA / identity-driven ZTNA implementation Migration from legacy access request tooling SailPoint Data Access Security (DAS) and Non-Employee Risk Management (NERM) implementations Skills & Experience xrnqpay 5+ years' experience in Identity & Access Management architecture Strong knowledge of SailPoint IGA, Entra ID, Active Directory Solid understanding of OIDC, OAuth2, Kerberos, LDAP Experience with traditional and modern PAM solutions TOGAF certified (or equivalent experience) Proven experience applying architecture in Agile delivery environments (Scrum, SAFe, Lean Portfolio)

Process Cooling Engineer Scroll down the page to see all associated job requirements, and any responsibilities successful candidates can expect. Salary: Up to £55,000 basic Benefits: Door-to-door travel pay + 25 days holiday + bank holidays Location: Field-based, South West The Role We are seeking an experienced Process Cooling Engineer to join a growing and well-established engineering business. This is a field-based role involving installation, service, maintenance, and repair of industrial process cooling systems across a range of client sites. You will be working on equipment such as chillers, cooling towers, and associated systems, ensuring optimal performance and reliability for customers in sectors including plastics, manufacturing, food production, and commercial environments. Key Responsibilities Service, maintenance, and fault finding on process cooling equipment Installation and commissioning of chillers and cooling systems Diagnosing and repairing mechanical and electrical faults Providing excellent customer service on-site Completing service reports and documentation accurately Ensuring all work is carried out in line with health & safety regulations Requirements Proven experience working with process cooling systems / chillers Strong electrical and mechanical fault-finding skills F-Gas qualification (essential) Full UK driving licence Ability to work independently in a field-based role Package Basic salary up to £55,000 (depending on experience) Door-to-door travel pay 25 days holiday + bank holidays Company vehicle, tools, and equipment provided Overtime opportunities Ongoing training and development This is an excellent opportunity for a skilled engineer looking to join a company that values its workforce and offers strong earning potential and career progression. xrnqpay Apply now or get in touch for more information. Process Cooling Engineer - Bath Process Cooling Engineer - Bath Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, were inspired by the opportunities to innovate and break boundaries. Were proud to play a part in protecting the worlds democracies. And were committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the worlds aircraft and engine manufacturers and achieved sales of £3.35 2023. There are no limits to where you can take your career. Job Summary Its great to know youre making a difference to the future of aviation! Whatever part you play youll be helping us deliver operational excellence to our customers. At our GKN Filton site, we specialise in the design and manufacture of large complex structural wing assemblies, detailed metallic components and wing systems for a combination of both civil and military aircraft. We are seeking a Manufacturing Project Engineer to lead capital expenditure (CapEx) projects to deploy new production equipment, automated systems, and advanced industrial solutions within an aerospace manufacturing environment. Are you the right candidate for this opportunity Make sure to read the full description below. The successful candidate will manage the end-to-end lifecycle of CapEx projects including concept development, business case creation, budgeting, scheduling, and execution. The successful applicant will work a 4.5-day week, including flexitime in a full-time permanent capacity, equating to a 35 hour week as part of a small team of Manufacturing Engineers. How You'll Contribute The successful applicant will: • Prepare detailed equipment specifications that meet aerospace standards for precision, traceability, and repeatability. Design future processes implementing lean tools and methods in accordance with the GKN standard lean tool suite, • Coordinate supplier selection, RFQs, technical reviews, contract negotiations, and design verification, • Lead FAT (Factory Acceptance Test), SAT (Site Acceptance Test), commissioning, and full production readiness validation, • Ensure new equipment meets aerospace requirements such as NADCAP, AS9100, and internal engineering specifications. Validate equipment and processes through capability studies (Cp/Cpk), PFMEA, control plans, and process documentation, • Utilize root cause analysis, preventative and corrective action to reduce/eliminate non-conformances, • Ensure the delivery of expected benefits by driving projects to completion, on time and on budget, validating performance outcomes, and confirming that all operational, financial, and strategic objectives are fully achieved, • Build meaningful, lasting relationships with highly skilled operators, ensuring that any systems or equipment introduced are both appropriate and embraced, • Work closely with Production, Quality, Engineering, EHS, and Supply Chain teams to ensure seamless industrial deployment, • Maintain positive, team relationships with internal and external customers, as well as co-workers, • Continuously improve production and internal processes by implementing Lean initiatives, • Exemplify a safety-first mind-set and ensure compliance with the GKN Aerospace Health, Safety and Environmental policies and standards Essential: • Certifications: PMP/Prince2, • A Competitive Salary, • Industry Leading Pension Scheme = well match your contributions up to 8% on a 1 : 1.5 basis (Totalling 20% Contribution), • Life Assurance 8 x salary, • 25 days holiday + bank holidays, • Flexible working hours including the ability to finish at 12noon on a Friday, • Income protection, • Shopping discounts, • Cycle To Work Scheme, • Employee Assistance Programme, • Virtual GP Clinic for you and immediate family Well offer you fantastic challenges and amazing opportunities. xrnqpay This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go?

CS 501 LEV Engineers Needed! £35,000 - £40,000 UK Are you a P601-qualified LEV Engineer who's tired of being underpaid, overbooked, and overlooked? Do you want proper support, realistic workloads, top-tier equipment, and pay that reflects your expertise? If you hold the BOHS P601 - Thorough Examination and Testing of Local Exhaust Ventilation Systems, we want to talk to you. What's In It For You? • £35,000 - £40,000 + DOE (no vague promises), • Paid travel time, • Company vehicle + fuel card, • Overtime at enhanced rates, • Annual bonus, • Ongoing training & paid certifications, • Clear progression into Senior / Technical Lead roles You'll carry out Thorough Examination & Testing (TExT) of LEV systems across manufacturing, engineering, food production, and pharmaceutical sites. You'll: • Conduct LEV testing in line with HSG258, • Produce clear, compliant reports, • Identify defects and recommend remedial actions, • Liaise professionally with clients on-site Are you ready to apply Make sure you understand all the responsibilities and tasks associated with this role before proceeding. No being sent in blind. No unrealistic targets. Just professional LEV engineering done properly. You Must Have: • P601 qualification (essential), • Experience testing LEV systems, • Strong knowledge of COSHH & HSG258, • Full UK driving licence Why Engineers Join Us (And Stay) Because we actually understand LEV. We don't treat you like a number. We don't overload your diary. We don't cut corners. You'll be part of a specialist compliance team that values technical accuracy, safety, and long-term relationships - not rushed reports. Ready to Talk? If you're P601 qualified and even slightly curious about earning more while working smarter: Apply now. Or message us confidentially for an informal chat. No CV ready? No problem. Let's start with a conversation. P601 LEV Engineers are in demand. The question is - are you in the right company? xrnqpay To apply for this position send your CV to or call ext 202 for more information. INDW

About the company To be considered for an interview, please make sure your application is full in line with the job specs as found below. We're partnered with a leading aerospace and engineering services provider operating within highly regulated, safety-critical environments. The organisation delivers specialist inspection, testing and training services to both internal teams and external customers, with a strong reputation for technical excellence and compliance. The business invests heavily in people, offering ongoing training, certification support and opportunities to work across national and international programmes. About the role An opportunity has arisen for an NDT Level 2 or Level 3 Instructor / Examiner / Engineer to join a specialist training and inspection team based in the Bristol area. This is a varied role combining technical instruction, examination and hands-on NDT inspection, supporting candidates through approved training programmes while also delivering inspection services for customers when required. Key responsibilities include: • Delivering high-quality NDT training courses to internal and external candidates, • Invigilating, examining and marking examinations in line with industry standards, • Supporting training administration, quality requirements and course preparation, • Undertaking NDT inspections across multiple methods at company and customer sites, • EN4179 Level 2 or Level 3 certification in one or more NDT methods (UT, PA, ET, PT, MT or RT), • Evidence of instructional or teaching capability (or willingness to obtain), • Strong written and verbal English communication skills, • Ability to work independently while supporting xrnqpay a collaborative team environment, • Full UK driving licence and willingness to travel occasionally This is an excellent opportunity to step into a dual technical and instructional role within a respected aerospace organisation offering flexible working, strong benefits and clear development pathways. If you're an experienced NDT professional looking to combine inspection work with training and knowledge-sharing, we'd love to hear from you.

Field Service Engineer - FLT and MHE Apply (by clicking the relevant button) after checking through all the related job information below. Location: Covering BS11 Postcodes (Avonmouth) Hours: Monday to Friday - 40 Hour or 45 Hour Week available Salary: £30,000 - £37,000 (40 Hours) or £36,000 - £42,500 (45 Hours) I am currently partnering with a market leading materials handling business that are currently looking to recruit an experienced field service engineer to service and maintain Forklift Trucks and other MHE equipment across customer sites. As a Field Service Engineer, you'll cover your local patch carrying out diagnostics, repairs, and servicing of FLT and material handling equipment. You'll have the freedom to plan your own day while enjoying the backing of a strong technical team and ongoing manufacturer training. Key Requirements of the Field Service Engineer: • Strong Engineering background - ideally with FLT/Mobile Plant/HGV or industrial Vehicle experience., • Engineering skills within Electrical, Mechanical and Hydraulics are required., • Recognised engineering qualification (NVQ Level 3, City & Guilds or equivalent)., • Full UK Driving Licence is essential., • Full Training and Induction Scheme, • Company van & fuel card., • Regular overtime available with Door to Door pay., • Company Pension Scheme As a registered candidate with Pioneer Selection Ltd, you automatically become eligible for our referral scheme. xrnqpay You will receive £250 for every candidate we place in permanent employment who has been recommended by you. Terms and Conditions apply please see our website for further details.

Field Service Engineer (CHP &Biogas Engines) Location: Southwest England (Field Based) Have you got the right qualifications and skills for this job Find out below, and hit apply to be considered. Ideal Base: Yeovil or surrounding areas Salary: Up to £44,000 basic salary + Overtime + Excellent Benefits OTE: £49,000 £54,000+ (depending on overtime/callouts) Job Type: Permanent The Company Our client is a leading provider of installation, servicing and maintenance solutions for gas engine power generation systems and CHP equipment within the renewable energy sector. They have built an excellent reputation for delivering high-quality engineering support across the UK and continue to grow through strong customer relationships and first-class field service delivery. The Role An excellent opportunity has arisen for a mechanically biased Field Service Engineer to join the Southwest team, supporting a portfolio of CHP and Biogas engine sites. Reporting to the UK Operations Manager / Operations Director, you will be responsible for servicing, maintenance, fault finding and repairs on a range of gas engines from 120kW to 3MW, working predominantly on: • Jenbacher, • MWM This is a field-based role with travel across the Southwest patch. Engineers are paid door-to-door. Key Responsibilities • Service, maintain and repair CHP / Biogas gas engines, • Carry out PPM and scheduled maintenance works, • Attend breakdowns and diagnose mechanical and basic electrical faults, • Replace components and carry out engine repairs, • Complete engine inspections and performance checks, • Fault find on associated plant and auxiliary equipment, • Work on engine control systems (DIANE / COMAP / DEIF / TEM preferred), • Complete detailed service reports and paperwork accurately Essential: • Time served as a Mechanical Engineer, • NVQ Level 2 / Level 3 in Mechanical Engineering or similar, • Strong mechanical fault-finding and repair skills, • Experience working on engines, generators, power generation plants, or rotating equipment, • Full UK driving licence, • Good communication and customer-facing skills, • CHP / Biogas engine experience, • Jenbacher / MWM / MAN engine knowledge, • Generator, marine diesel, heavy plant or wider power generation background, • Basic electrical fault-finding skills (24v DC controls / 415v systems), • Gas Safe qualification, • Field-based across the Southwest region, • Door-to-door paid travel, • Occasional overnight stays required, • Hotel paid by the company, • £35 evening meal allowance On Call • 1 in 3 rota (Monday to Monday), • Callout hours: 07:00 22:00, • No standby payment (included within salary), • Up to £44,000 basic, • Overtime, • Double time on Bank Holidays, • Typical OTE £5k£10k extra, • Door-to-door pay, • Company vehicle + fuel card (optional private use), • 24 days holiday + bank holidays, • Contributory pension, • Private healthcare (non-contributory), • Laptop, phone, PPE and specialist tooling provided Your data will be handled in line with GDPR. Talent Finder is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. xrnqpay We welcome applications from all backgrounds regardless of race, sex, disability, age, religion, or sexual orientation.

Role: Electrical Bias Maintenance Engineer Check all associated application documentation thoroughly before clicking on the apply button at the bottom of this description. Shift: 4 on 4 off Pay: Circa £56,000 - £57,000 Location: Bridgwater Join an Industry Leader Driving Innovation & Growth! Are you an Electrically Bias Maintenance Engineer looking to work with cutting-edge manufacturing technology in a thriving industry? Would you like to be part of a company investing heavily in new machinery, increasing production capacity, and continually driving innovation? If so, this could be the perfect opportunity for you! We are working with an established and forward-thinking manufacturing business at the forefront of technical advancements. With a strong reputation for innovation and collaboration, they are expanding operations and investing in state-of-the-art equipment to enhance their production capabilities. This is what you'll be doing: As a Maintenance Engineer, your responsibilities will include: • Providing expert first-line support on all manufacturing assets and processes., • Conducting fault-finding, repair, and maintenance on production machinery., • Implementing and improving preventive maintenance programs to enhance efficiency., • Working alongside production teams and contractors to ensure minimal downtime., • Driving continuous improvement initiatives, analysing equipment performance, and identifying long-term solutions., • Maintaining compliance with safety and quality standards., • Assisting in engineering projects and installation of new equipment. To be successful in this role, you should have: • Proven experience in a high-volume manufacturing environment., • A recognised engineering qualification (NVQ, HND, or equivalent)., • A strong electrical bias, • Experience with AC/DC wiring and fault-finding., • An understanding of health & safety regulations in an industrial setting., • The ability to work efficiently under pressure and prioritise tasks effectively., • Salary £56,000 - £57,000, • Overtime available hourly rate, • 240 hours annual leave (increasing with service), • Guaranteed Christmas and New Year shutdown, • Pension - 4% employer contribution, • Annual Pay Reviews, • Free on-site parking, • On-site canteen, • Bike to Work scheme, • Company uniform Are you up to the challenge? Are you what we're looking for? Please get in touch today with engineering specialist recruiter, Liam Reid. Please apply with a CV and feel free to include a cover letter outlining why you're perfect for the role. We also have a referral scheme so if you know of someone who would be great for the role please get in touch. *Please note, whilst we do our best to contact all candidates, due to the high number of applications we receive we cannot guarantee this for every role. If you have not heard anything from us within 7 days of applying - then unfortunately you have been unsuccessful. xrnqpay Please keep an eye on our website for more opportunities.

Morson Edge have a position available at a Bristol studio for a Landscape Architect looking to develop their professional and technical skills whilst contributing to an exciting programme of high-quality work. Interested in this role You can find all the relevant information in the description below. You will have the opportunity to work within an award winning, interdisciplinary practice and contribute to an exciting programme of work including the design of parks, streets, urban spaces, and a variety of prestigious buildings across the UK and overseas. You will have excellent design skills coupled with good relevant experience that demonstrates solid CAD and IT proficiency. Passionate about Landscape Architecture, you will be keen to develop your personal and professional skills in a supportive environment. You will demonstrate a collaborative team-working style and enjoy working to tight deadlines. You will be able to work effectively with people at all levels and from all backgrounds and have excellent communication skills, both verbally and in writing. The company is a leading, global, multidisciplinary design practice united by a shared purpose: to design a world that's built for good. For more than 60 years, they have been solving problems, creating innovative spaces, and pushing the boundaries of what's possible. From the start, they have been pioneers in the world of design, and their legacy is built on the meaningful, people-centred places they have brought to life. xrnqpay We're proud of the places we've shaped and the lives we've touched, and we are committed to continuing our mission of designing a better, more connected world—one that leaves every place better than we found it. Please apply with full cv and portfolio of work.