Offres inspection engineer à Royaume-Uni

We are looking for a qualified Electrician / EV Installation Engineer to join our growing team. In this role, you will be responsible for the installation, maintenance, and repair of electric vehicle (EV) charging systems and associated electrical infrastructure. This is an excellent opportunity to be part of the fast-growing EV sector, supporting the transition to sustainable transport. We’re seeking someone with strong electrical expertise, a high standard of workmanship, and a professional, customer-focused approach. Experience: 2 years + About Watten Power Watten Power is a fast-growing renewable energy company specialising in EV charger installations, solar PV systems, and smart energy solutions across the UK. Our mission is to deliver high-quality, future-ready energy infrastructure that supports the transition to a cleaner and smarter energy future. As part of our expansion, we are seeking a motivated and skilled Electrician to join our technical team and support the installation and commissioning of EV charging and renewable energy systems. Role Overview • The successful candidate will be responsible for carrying out electrical installation, • works primarily relating to EV charging systems, with future involvement in solar PV, battery storage, and integrated smart energy systems., • This is an excellent opportunity for a qualified electrician looking to grow within the renewable energy sector and receive further specialist training. Key Responsibilities • Install and commission domestic and commercial EV charging systems, • Carry out electrical testing, inspection, and certification of completed works, • Conduct site surveys and technical assessments prior to installation, • Ensure all works comply with current BS 7671 regulations and relevant standards, • Complete installation documentation, certification, and job reports accurately, • Liaise professionally with customers and explain system operation upon handover, • Support future installation works relating to solar PV, battery storage, and renewable technologies, • Maintain tools, equipment, and company vehicle in good condition, • Work collaboratively with the technical and operations teams Essential Requirements • NVQ Level 3 in Electrical Installation or equivalent, • 18th Edition Wiring Regulations Qualification, • Minimum 2 years’ practical experience as a qualified electrician, • Full UK Driving Licence, • Strong understanding of electrical safety and compliance, • Good customer-facing and communication skills, • Ability to work independently and as part of a team Desirable / Advantageous Qualifications • EV Charge Point Installation Qualification, • 2391 / 2394 / 2395 Inspection & Testing Qualification, • Previous EV Charger Installation Experience, • Experience with Commercial Electrical Installations, • Solar PV / Battery Storage Experience, • ECS Gold Card, • Experience with OCPP / Smart Charger Commissioning, • Candidates without EV or Inspection & Testing qualifications may still apply, as training will be provided for the right individual. What We Offer • Competitive Salary, • Company Vehicle / Fuel Support, • Specialist Training & Career Development, • Opportunity to Work in High-Growth Renewable Energy Sector, • Progression into Senior Technical / Supervisory Roles, • Supportive and Ambitious Team Environment

About the job The basics £55K-£75K base + meaningful founding equity Hoxton, London. In-office 5 days a week. Travel to customer branches across the UK. PLEASE DO NOT APPLY IF YOU ARE NOT IN THE UK! This will be the hardest job you've ever had. We're hiring our Founding Operator. The person who sits between our engineering team and our customers and makes sure neither one gets pulled into the wrong things. You'll be CS-trained but you don't want to be an engineer anymore. You can read our codebase, write SQL against the data warehouse, pull your own analytics, and debug a production customer issue down to the line. But the majority of your time, you'll be in front of customers. Onboarding agency staff. Training negotiators. Sitting in branches. Walking MDs through how Letty actually works. The engineering team builds. You make sure customers actually use what they built. 👋 What we're building Our starting point is selling to real estate agencies, where we're replacing manual workflows with AI employees that handle tenant engagement, landlord outreach, compliance, and maintenance autonomously. Property is one of the most important parts of people's lives, and the experience of buying, selling or renting one is still terrible. Nobody has built the definitive AI agent layer for real estate yet. That's what we're doing. 🏗️ About us • Backed by Entrepreneurs First and top-tier VCs, • Live with agencies across the UK with early US traction, • Building AI agents that don't just assist. They do the work., • Based in Hoxton, London. In-office 6 days a week. 🛠️ What you'll do Most days, you're customer-facing. • Take new agency customers from signed contract to fully live branch in 7 days or less, • Sit inside branch offices. Watch negotiators work. Map their daily workflows. Configure Letty to fit., • Train branch staff (negotiators, managers, MDs) on every Letty workflow they touch. In person. Hands-on., • Build the training curriculum from scratch. Docs, videos, certification paths, refresher modules., • Own the adoption metric. Daily active usage per branch is your north star. Some days, you're technical. • Triage customer issues yourself instead of opening an engineering ticket. SQL queries, log inspection, config changes. You handle most of it without pulling engineering in., • Pull your own analytics. You don't wait for someone to build you a dashboard., • Read the codebase well enough to file useful, specific bug reports. "The webhook handler at X is dropping payloads when Y" beats "it's broken.", • Stand up internal tooling for the customer team. Scripts, dashboards, automations. Every day, you're the bridge. • Surface product feedback to engineering with specifics, repro steps, and prioritisation, • Block engineering from being interrupted by customer questions you should answer, • Translate between MD-speak and engineer-speak, in both directions 🎯 You'll be a great fit if • 🎓 You have a CS background. Degree or equivalent self-taught depth. You can read Python, FastAPI, TypeScript, SQL. You understand how the systems we run actually work., • 🛑 You don't want to be an engineer. You've done the engineering thing. You'd rather solve customer problems than ship features. That's a feature, not a bug., • 🤝 You like being with customers. Branch offices, on the phone, at viewings, in their world. You'd rather be in a 10am customer meeting than a 10am sprint planning., • 📊 You're fluent in SQL. You don't ask the data team for numbers. You write the query, you check the output, you make the call., • 🧠 Structurally minded. You can take a messy implementation and turn it into a repeatable playbook by customer #3., • 🍎 Teacher's instinct. You can read the room when a 55-year-old branch manager isn't getting it. You break things into steps. You don't sigh., • 🤖 AI-native. Cursor, Claude, Lovable. You ship docs, internal tools, and training materials 10x faster than people who don't use them. We value taste, speed, and a maker's mindset over credentials. ⭐ Bonus points • Ex-engineer, ex-founder, or ex-forward-deployed engineer at a B2B SaaS or AI startup, • Prior customer-facing work on a solutions or implementation team, • Comfortable on UK rail. You'll be on trains to branches across the country regularly. 🚫 This role isn't for you if • You actually want to be an engineer (we're hiring engineers separately, this isn't the path), • You want to onboard customers from behind a screen, • You think customer-facing work is beneath your skill set, • You optimise for predictable hours or work-life balance, • Six days a week (in-office plus customer sites) sounds exhausting rather than energising 🔥 How we work We work hard. Six days a week, intense. On customer sites when launches are live, sometimes seven days a week. We're rebuilding a $1T+ industry and we don't think that happens on a 9-to-5. We're also having fun. The team is sharp, ambitious, and genuinely enjoys the work. If "six days a week" sounds exhausting rather than energising, this isn't the role for you. 🎁 What we offer • £55K-£75K base depending on experience, • Meaningful founding equity, • 🏥 Private health insurance, • 🚗 Uber home when you're working late, • 🍲 DoorDash dinners in the office, • 🧽 Monthly home clean, • 💻 Brand new MacBook, • Travel covered for customer site visits But the real offer is ownership. You define what the operator role is at Letty. You build the playbook. You decide what good looks like. No waiting for permission. 📌 Interview process • 15-min screen with our Founder's Associate, • 20-min screen with the CTO, • Technical/operator screen with the CEO, • Day trial in the office, • Offer

We are looking for an Autonomous Vehicle Operations Engineer to support the deployment, maintenance, testing, and daily operation of autonomous vehicles. Responsibilities • Perform daily inspection, maintenance, and operational support of autonomous vehicles, • Support software deployment, OTA upgrades, and system updates, • Conduct sensor calibration, system validation, and vehicle quality checks before operation, • Troubleshoot hardware and software issues and assist with vehicle maintenance when required, • Maintain technical documentation, operational records, and maintenance reports, • Support operational process improvement, issue tracking, fault analysis, and reporting, • Work closely with testing, engineering, and operations teams to ensure vehicle readiness and reliability Requirements • Bachelor's degree in Computer Science, Electronics, Automation, Vehicle Engineering, or a related field, • Minimum 3 years of experience in system operations, maintenance, testing, or technical support, • Familiar with Linux operating systems, • Knowledge of Shell, Python, or other scripting languages, • Understanding of ADAS or autonomous driving systems, • Strong troubleshooting and problem-solving skills, • Good communication skills and ability to work in a fast-paced operational environment, • Experience with ROS, robotics, autonomous vehicles, or automotive systems is a plus

About Neubond Our wearable neuromuscular devices help stroke patients rehabilitate from mobility impairments through patient-centred, more accessible, and continuous care based on deep neuroscience-driven technology. This core technology has been developed in the Neurorehabilitation Engineering Lab at Imperial College London, with support from stroke patients and clinicians in London and internationally. Role Overview We are looking for a hands-on Production Engineer to lead the transition of our wearable medical device from engineering prototype to scale-ready, regulatory-compliant manufacturing. You will play a key role on establishment of manufacturing processes, including supplier selection, production line setup, and test and inspection workflows—ensuring a smooth transition from prototype to scalable volume production. You will also drive design for manufacture and assembly (DfM/DfA), implement robust quality control systems, and ensure compliance with medical device standards, delivering consistent, high-quality products ready for real-world deployment. Key Responsibilities Manufacturing & Design Transfer • Lead DfM / DfA activities to support the transfer from R&D to low-volume production, • Develop and maintain BOMs, assembly drawings, work instructions, and test procedures, • Develop and maintain process validation, continuous improvement initiatives, and root cause analysis Supplier & Contract Manufacturer Management • Identify, qualify, and manage suppliers and contract manufacturers (PCBA, flex circuits, electrodes, plastics, silicone, textiles), • Drive cost, quality, and lead-time optimisation across the supply chain Quality & Regulatory Support • Work within an ISO 13485-compliant QMS, • Support documentation for:, • Design History File (DHF), • Collaborate with regulatory consultants on regulatory standards (e.g., IEC 60601, risk management (ISO 14971), and usability engineering inputs)

Job Summary Autel UK is seeking a proactive and customer-focused EV Charger On-Site Maintenance Engineer to provide field-based technical support for Autel EV charging products across the UK and Ireland. The role will cover installation support, commissioning, preventive maintenance, fault diagnosis, and timely issue resolution to ensure safe, reliable charger operation and excellent customer experience. Key Responsibilities • Provide on-site technical support for Autel EV charging products, including installation guidance, commissioning, maintenance, troubleshooting, and after-sales service., • Carry out routine inspections, preventive maintenance, fault diagnosis, and corrective repairs for AC/DC EV chargers and related low-voltage electrical systems., • Respond to customer technical issues and service requests, ensuring timely resolution and clear communication., • Support project delivery, including site assessments, system testing, commissioning, technical acceptance, and handover., • Collaborate with internal R&D, product, and technical teams to report field issues and support product improvements., • Prepare service reports, maintenance records, troubleshooting documents, and technical case summaries., • Deliver technical training and operational guidance to customers, partners, and internal teams when required., • Ensure all work complies with UK and Ireland electrical regulations, health and safety requirements, and company procedures. Required Qualifications and Experience • Fully qualified electrician with recognised UK or Ireland electrical qualifications and proven experience in commercial or industrial electrical environments., • Minimum of 3 years’ experience in EV charging infrastructure, electrical maintenance, new energy, field service, or a related technical environment., • Strong understanding of EV charging systems, electrical distribution, low-voltage electrical equipment, and field maintenance processes., • Familiarity with UK and Ireland electrical standards, safe working practices, and health and safety requirements. Electrical Certifications and Compliance Requirements • Level 3 electrical installation or maintenance qualification, such as City & Guilds 2365/2330, EAL Level 3, NVQ Level 3, or equivalent., • NVQ Level 3 in Electrotechnical Services, Electrical Installation, Electrical Maintenance, or equivalent apprenticeship-backed qualification., • AM2, AM2S, or equivalent end-point assessment., • Current BS 7671 Wiring Regulations qualification, commonly known as the 18th Edition., • Inspection and testing qualification, such as City & Guilds 2391, 2394/2395, or EAL equivalent., • ECS/JIB Gold Card or equivalent recognised electrician competence card., • Electrical safe isolation training and practical competence in lock-out/tag-out procedures, risk assessments, method statements, and permit-to-work processes., • EV charging installation qualification, such as City & Guilds 2919/2921, EAL EV charging qualification, or equivalent, is highly desirable., • Full UK driving licence and willingness to travel frequently across the UK and Ireland., • Fluent English communication skills; additional European languages are advantageous. Preferred Qualifications • Experience with OCPP, charging management platforms, network communication protocols, and remote monitoring tools., • Experience working with AC chargers, DC fast chargers, and/or energy storage systems., • Knowledge of smart charging, load management, renewable energy integration, and grid-interactive charging solutions., • Experience supporting partners, installers, charge point operators, or fleet customers. Key Competencies • Field service excellence and customer orientation., • Strong electrical safety awareness and disciplined working practices., • Technical troubleshooting and root cause analysis., • Clear reporting, documentation, and stakeholder communication., • Ownership, accountability, and continuous improvement mindset., • Autel is committed to delivering reliable and innovative EV charging solutions while maintaining high standards of safety, service quality, and customer satisfaction. Location: Watford, United Kingdom, with travel across the UK & Ireland Start Date: As soon as possible Working Hours: Full-time Apply now and join Autel to create a smarter future together!

NDT Technical Engineer (Non-Destructive Testing) – Rolling Stock Location: West London & London Travel Rate: £527.14 per day (umbrella) Duration: 6 months (likely extension) We are recruiting for an NDT Technical Engineer to support a specialist Vehicles Engineering Testing team within a leading transport organisation. Key Responsibilities • Carry out NDT inspections on rolling stock assets, • Interpret codes, standards, and procedures into practical instructions, • Evaluate inspection results in line with relevant standards, • Support engineering teams with technical reporting and insight Essential Requirements • PCN Level 2 certification in:, • Magnetic Particle Inspection (MPI), • Dye Penetrant Inspection (DPI), • Experience performing NDT to recognised standards and procedures, • Ability to interpret and evaluate results against codes/specifications, • Knowledge of British/international standards, • Rail or rolling stock experience Desirable • PCN Level 2 in Ultrasonic Axle Testing (UAT), Eddy Current, or Ultrasonic Testing (UT) We can only consider applications from those eligible to work in the UK for this position. This position will require some additional checks, to ensure you can access the site worked as needed. For more information on this position, please contact Marika Powell at ARM on 02392 228232 or email your CV and covering letter to marika.powell@arm.co.uk.

Electrical Testing & Remedial Works Engineer – London | Up to £47k ⚡\nLooking for a career where your skills are valued, your growth is supported, and your work really matters? We’ve got the role for you!\nWhat’s in it for you?\n Competitive salary up to £47,000 per year\n Plus overtime paid at time and a half evenings & Saturdays and double time on Sundays available every month\n🚗 Company vehicle + fuel card + private mileage allowance\n🏥 Private healthcare contribution\n🌴 Increasing holiday allowance\n🛠️ Full training, upskilling, and support to gain additional electrical qualifications\n📈 Real career progression in a supportive team\nThe Role:\nWork across domestic and commercial properties in London, mainly in social housing and local authority sectors. Conduct EICRs, fix issues on the spot, and complete full rewires for non-compliant properties.\nYou’ll Need:\nStrong testing & inspection skills\nExperience diagnosing and fixing electrical faults\nL3 Electrical Installations Diploma & City & Guilds NVQ Level 3 (or equivalent)\n18th Edition Wiring Regs & Inspection & Testing (C&G 2391-51)\nFull UK driving licence\nWhy Join?\nBe part of a team that cares, supports, and invests in your growth. Gain new qualifications, upskill while you work, and enjoy real career progression in a safe, rewarding environment.\nReady to take the next step? Apply today and power up your career

Electrical Field Service Engineer (EV Infrastructure)\n Location: South London (Croydon)\n Sector: EV Infrastructure\n Salary: £39 – 50,000 DOE Plus Van and Fuel Card\n\n Overview\n \n Holt Engineering is seeking an Electrical Field Service Engineer to commission, maintain, and repair EV charging equipment across the UK, including AC chargers, Rapid DC, Ultra and High-Power Charging (HPC) systems.\n This position suits an engineer with a strong electrical background who can work autonomously and deliver high-quality on-site support. The successful candidate will ensure EV charging stations operate reliably, safely, and to the standards expected by clients and end users.\n The role involves working in varied environments, including outdoor locations and confined spaces. Occasional travel and overnight stays will be required.\n\n Essential requirements\n\nNVQ Level 3 Electrical qualification\nMinimum 2 years’ experience in a field-based engineering role (commissioning, maintenance, or repair of electrical systems/equipment)\nProven ability to work independently on customer sites and resolve issues without direct supervision\nExperience working in SLA-driven environments\nFamiliarity with test and measurement tools such as multimeters and voltage testers\nStrong fault-finding and problem-solving capability, including diagnosis of complex issues\nClear communication and strong customer-facing skills\nEffective time management while travelling between sites\nFull UK driving licence with 6 penalty points or fewer\nAM2 QualificationDesirable requirements\n\nBS7671:2018 (18th Edition Wiring Regulations)\nCity & Guilds 2391/2394 Testing and Inspection\nExperience in EV charging, renewable energy, or power electronics environments\nEV charging certification and/or manufacturer-specific training\nHands-on experience commissioning, maintaining, and repairing Rapid DC, Ultra and HPC chargers\nAbility to read and interpret electrical schematics and technical manuals\nUnderstanding of analogue and digital electronics and components\nStrong awareness of electrical hazards and on-site health & safety requirementsKey responsibilities\n\nWork closely with Service Coordination and Operations teams to ensure accurate job data capture and timely service reporting\nCommission and configure AC and Rapid DC chargers on client sites\nComplete initial setup and functional testing to ensure correct operation and compliance with relevant standards\nCollaborate with project management and installation teams to support smooth integration of chargers into customer infrastructure\nMaintain company tools, assets, and test equipment, reporting defects promptly\nCarry out routine and preventative maintenance to maximise charger uptime and performance\nDiagnose and resolve issues across electrical, mechanical, and software-related fault types\nPerform diagnostic testing, firmware updates, and calibration where required\nReplace faulty components and, where necessary, complete full AC charger swaps, following manufacturer guidelines\nProvide on-site technical support and basic operational guidance/training to clients\nRespond to service requests promptly and keep clients updated to support customer satisfaction\nRecord all service activity, repairs, maintenance actions, and customer communications within the service management system\nFollow all company policies and safety procedures while working in the field\nEnsure compliance with applicable electrical codes and standards during commissioning and maintenance\nParticipate in mandatory safety training and renew certifications as requiredBenefits\n\nStructured career progression framework\nCompany van and fuel card\nOvertime\n30 days annual leave (inclusive of company shutdown days)\nTravel subsistence provided\nDiscretionary company performance bonus\nBUPA healthcare (after 6 months)\nSalary sacrifice pension scheme (8% total)\nSalary sacrifice EV car scheme and charger installation\nSalary sacrifice holiday purchase scheme (up to 5 days)\nEnhanced family-friendly policies\nFlexible benefits platform with a wide range of discounted products and services\nLong service awards

Quality Engineer\n\nRole Purpose\n\nThe Quality Engineer is responsible for ensuring that Ferrovial Construction projects at Heathrow Airport meet client requirements, company procedures, and industry standards. The role promotes a Right First-Time culture and oversees quality assurance and control for site teams, subcontractors, and suppliers.\n\nLocation: Heathrow Airport\n\nReporting Line: Quality Manager, Ferrovial Construction\n\nKey Responsibilities\n\n Primary on‑site point of contact for project teams, subcontractors, and suppliers for all quality control and quality assurance matters.\n\n Ensure compliance with client requirements and Ferrovial quality processes through regular site visits and factory acceptance testing (FAT) of off-site manufactured products.\n\n Plan and lead quality audits and inspections (on-site and at supplier facilities), coordinating with clients and stakeholders, and issuing findings and corrective actions promptly.\n\n Carry out routine construction quality inspections to confirm they meet requirements, including verifying test results, tolerances, materials, execution, and visual aspects.\n\n Assist the Quality Manager in establishing the Quality Verification Plan (QVP) with the client and identify which aspects of the design require verification during construction.\n\n Raise a non-conformance if issues arise, follow resolution steps, and record progress. Analyse trend data and report as needed.\n\n Review, verify and sign control records and inspections, such as site records and related documents, and ensure they are prepared, assembled, and communicated promptly.\n\n Support the construction team in developing the relevant quality controls, such as Inspection & Test plan (ITP) and ensure that the controls are accepted before work starts.\n\n Verify that all materials utilised and installed conform to the required specifications and approved before use.\n\n Assist with digitalising and implementing quality processes, including inspection sheets.\n\n Work with construction, departmental managers and document controllers to ensure quality standards are documented and properly implemented.\n\n Submit Health & Safety Files, Site Records, Production Certification documents and update and distribute Works Package Quality documents, including site records and testing.\n\n Coordinate with the client to confirm benchmarking and sampling events, and ensure their timely completion.\n\n Engage with the project teams and suppliers to reinforce the Quality Culture by supporting Toolbox Talks and weekly quality sessions.\n\nKey Skills & Experience\n\n Background in construction Quality Control and Assurance (QC/QA).\n\n Knowledge of inspections, ITPs, SATs, FATs and documentation.\n\n Strong communication and collaboration skills.\n\n Experience in regulated environments (desirable).\n\n Quality management plan experience\n\nPlease note that this job description does not represent a comprehensive list of activities and employees may be requested to undertake other reasonable duties.\n\nSeize the challenge. Move the world together! Innovative, creative, respectful, and diverse are some of the ways we describe ourselves. We are motivated by challenges, and we collaborate across our business units to move the world together. Your journey to a fulfilling career starts here!\n\nFerrovial is an equal opportunity employer. We treat all jobs applications equally, regardless of gender, color, race, ethnicity, religion, national origin, age, disability, pregnancy, sexual orientation, gender identity and expression, covered veteran status or protected genetic information (each, a “Protected Class”), or any other protected class in accordance with applicable laws.\n\n#WeAreFerrovial

Sector: Commercial Maintenance Duties will include planned maintenance within the building and the labs, from plant. You will have an electrical qualification as well as 18 t h edition and te st and inspection, with a prove n track reco rd in commercial maintenance. Lead Shift Engineer Surrey My cli

Job Role of the Engineer Surveyor. A standout opportunity has become available for a Engineer Surveyor to join a leading inspection consultancy. Non-Negotiable Requirements of the Engineer Surveyor.

Were seeking an experienced Lead Electrical Testing & Inspection Engineer to join our growing team, working across London, Monday to Friday, 08:0017:00. Extensive experience in electrical testing and inspection procedures. Undertake electrical testing, inspection, installation, and maintenance as re

The NDT Technician Engineer will have the ability to translate NDT codes, standards, specifications and procedures into NDT instructions, adapted to the actual working conditions and will currently hold 2 PCN certificates (level 2) covering the following disciplines: magnetic particle inspection, dy

As a Switchgear Service Engineer, you will be responsible for the maintenance, inspection, testing and fault‑finding of LV and HV switchgear and associated power distribution equipment.The role is primarily site‑based, combining hands‑on technical work with direct customer interaction.You will

We are seeking an Electrical Engineer to conduct In-service Inspection and Testing of Electrical Equipment (PAT) according to the current edition of the IET Code of Practice.The candidate will produce results that meet client and accrediting body standards, manage appliance testing in accordance wit

Keywords: Rope Access Technician, IRATA, Estimator, Junior Estimator, Construction, Civil Engineering, Kent, London, Southeast, Cost Engineer, Bid Engineer, Rope Access. We are working with a leading specialist in structural repair, inspection, and maintenance, using advanced rope access methods to

Update the Inspection plan into IDMS (Inspection Data Management System, ANTEA) according to the plant modifications, new inspection scopes and RBI output. Collect the inspection data to draft the monthly inspection report. Coordinate multidisciplinary support to inspection activity attending to the

Are you an ambitious Electrician / Electrical Inspection & Testing Engineer eager to elevate your career in a dynamic and growing company? Do you want to work in varied environments that challenge and develop your skills? Are you seeking a role that offers both autonomy and excellent earning potenti

Update the Inspection plan into IDMS (Inspection Data Management System, ANTEA) according to the plant modifications, new inspection scopes and RBI output. Coordinate multidisciplinary support to inspection activity attending to the “5 weeks look ahead” weekly meeting and update inspection main

ARMA Connect in Watford is seeking an ambitious Electrician / Electrical Inspection & Testing Engineer to join their team. This role includes ensuring safety and compliance of electrical installations, conducting inspections and producing reports.

Based in or commutable to London / South East Apply now or call Billy on for immediate consideration! Keywords: Electrical Testing, EICR, Electrical Inspection, Remedial Works, 2391, 18th Edition, Fixed Wire Testing, Electrical Engineer, Electrical Compliance, Communal Electrical Systems, Landlord E

The Electrical Field Service Engineer will be responsible for the commissioning, maintenance and repair of AC Chargers, Rapid DC, Ultra and High-Power Charging (HPC) EV Chargers across sites in the UK. This role is suited to someone with a strong electrical background who can work independently and deliver high-quality technical support on-site. You will ensure that all EV charging stations operate at peak performance and meet the high standards of our company and clients. This role will require someone who is comfortable working in various environments, including outdoor sites and confined spaces. Occasional travel and overnight stays will be required. Job requirements Essential: NVQ Level 3 Electrical Qualification. Minimum 2 years’ experience in a field-based engineering role (commissioning, maintenance, or repair of electrical systems/equipment). Demonstrated ability to work independently on client sites and resolve technical issues without direct supervision. Experience working under SLA-driven environments. Familiarity with basic test and measurement equipment such as multimeters and voltage testers. Excellent problem-solving skills with the ability to diagnose and repair complex technical issues. Strong communication and interpersonal skills for effective customer interaction. Ability to manage time effectively while travelling between client sites. Valid UK driving licence with 6 penalty points or less. Desirable: BS7671:2018 (18th Edition Wiring Regulations). City & Guilds 2391/2394 Testing and Inspection. Previous experience in the EV charging, renewable energy, or power electronics sectors. EV charging station certification or manufacturer-specific training. Hands-on experience with commissioning, maintaining, and repairing Rapid DC, Ultra and HPC EV chargers. Proficient in reading and interpreting electrical schematics and technical manuals. Understanding of analogue & digital electronics and components. Awareness of electrical hazards and on-site H&S requirements. Job responsibilities Work collaboratively with the Service Coordination and Operations teams to ensure accurate job completion data and timely follow-up on service reports. Commission and configure AC and Rapid DC chargers at client sites. Conduct initial set up and testing to ensure correct operation and compliance with industry standards. Collaborate with the project management and installation teams to ensure seamless integration of charging stations with client infrastructure. Maintain company assets, tools, and test equipment in good working order and report any defects immediately. Perform routine and preventive maintenance on EV charging stations to ensure optimal performance and uptime. Diagnose and troubleshoot technical issues, including electrical, mechanical and software-related problems. Conduct diagnostic tests, firmware updates and calibration of EV chargers as necessary. Replace faulty components and occasionally entire AC chargers. Ensure that all repairs are completed in accordance with manufacture guidelines. Provide on-site technical support and training to clients on the use and operation of EV chargers. Respond to service requests promptly and maintain effective communication with clients to ensure customer satisfaction. Document all service activities, including repairs, maintenance and customer interactions in the service management system. Adhere to all safety regulations and company policies while working in the field. Ensure compliance with local electrical codes and standards during commissioning and maintenance activities. Participate in regular safety training and certifications as required. Job benefits Structured career progression framework Company van + fuel card Overtime 30 days annual leave (inclusive of company shutdown days) Travel subsistence provided Discretionary Company performance bonus BUPA Healthcare (after 6 months) Salary Sacrifice Pension Scheme (8% total) Salary Sacrifice EV Car Scheme & Charger Installation Salary Sacrifice Holiday Purchase Scheme (up to 5 days) Enhanced Family Friendly Policies Additional benefits platform for you to select a wide range of discounted benefits and services Long Service Awards

NDT Technical Engineer (Rolling Stock) – Contract | London | £447.73 – £527.14 per day (Umbrella) Ceto Talent is recruiting an NDT Technical Engineer for a contract opportunity supporting rolling stock inspection and testing activities within a major London rail network. This is a full‑time, site‑based role working across multiple London locations within a safety‑critical environment. The role sits within a vehicle engineering and testing function, carrying out Non‑Destructive Testing (NDT) inspections to support the integrity, safety, and performance of rolling stock assets. There may be a requirement to work unsocial hours depending on operational needs. About You You will hold PCN Level 2 certification in Magnetic Particle Inspection (MPI) and Dye Penetrant Inspection (DPI) as a minimum and have experience performing NDT inspections in accordance with approved procedures, standards, and specifications. You will be comfortable interpreting and evaluating inspection results against relevant British and International Standards and translating NDT codes, standards, and specifications into practical inspection instructions suitable for live operational conditions. Experience working within a railway or rolling stock environment is essential. Additional PCN Level 2 certification in Ultrasonic Axle Testing (UAT), Eddy Current Testing (ECT), and/or Ultrasonic Testing (UT) is desirable. The Role You will carry out NDT inspections on rolling stock assets, supporting vehicle engineering and testing teams across London. The role involves inspection execution, results interpretation, documentation, and supporting the ongoing development of NDT instructions and inspection planning activity. Key Responsibilities • Perform NDT inspections to support rolling stock safety and asset integrity, • Interpret and evaluate inspection results in line with standards and procedures, • Support vehicle engineering and testing activity across multiple London locations, • Contribute to the preparation and development of NDT instructions and documentation, • Ensure all work is delivered in line with safety, quality, and engineering requirements What’s on Offer • £447.73 – £527.14 per day (Umbrella), dependent on experience and certifications, • 6‑month contract initially, with extension possible, • Full‑time, site‑based role across London, • Opportunity to work within a safety‑critical rail engineering environment Please apply via CV Library

Murphy is recruiting for a Senior Site Engineer to work with Energy on the National Grid, Great Grid Partnership across various projects. Our business is well-known for its extensive in-house expertise, experience, and continuous drive to innovate within the industry to create added value for all our customers. Throughout our history we have strived to challenge the norm and incorporate a wide range of new technologies and capabilities to ensure we meet the ever-changing markets and demands. Today we support groundbreaking transmission and distribution projects in four countries - ensuring their energy security for decades to come. We offer a wide range of services including design, construction and commissioning. We deliver Engineering, Procurement & Construction (EPC) projects serving both regulated and private customers along with technical and engineering solutions within the conventional power and energy transition markets. Our continual drive to innovate, while encouraging sustainability, ensures we remain at the forefront of the industry, and is demonstrated in our long-standing relationships with major energy providers in multiple countries. A day in the life of a Murphy Senior Site Engineer: Establish and promote best practice in health, safety and environmental matters in conjunction with the SHQE department. Assist with temporary works design schemes Maintain good working relations with client / designer / Team, together with our supply chain. Advise engineers on setting out methods and techniques. Ensure that the drawings and specification documents contain sufficient, accurate information for construction of the works. Formally request any missing information in sufficient time to allow the programme to proceed without delay. Communicate with foremen and supervisors to ensure full understanding of information provided. Overseeing the selection and requisition of materials and plant for the use in the construction process. Prepare written risk assessments and method statements for the control of the works. Keep a full and accurate daily site diary, including any changes/variations, subcontractors’ attendance, and records of work related discussions with client / designer / project team. Ensure that inspection and test plans are completed as required by the PMP / Specification, including a check of dimension accuracy and quality Still interested, does this sound like you? Experience in Construction or Civil Engineering projects. Experience within ITPs, RAMs & Temporary Works. Excellent knowledge of current civil engineering legislation as well as Health & Safety and Environmental legislation. Ability and confidence to discuss engineering issues with people across various levels and disciplines. Ability to produce, implement and manage safe systems of work for construction procedures

Berry Recruitment are NOW hiring for a committed and experienced Static Service Engineer to work for a company in London Role: Static Service Engineer Salary: £51,000 per annum Location: London Hours: 40 hours a week, Monday - Friday Key Responsibilities of the Static Service Engineer: Program and configure fire alarm control panels. Test all system components to ensure full functionality (e.g., initiating devices, notification appliances). Perform cause-and-effect testing (e.g., activating detectors and verifying the response). Document testing procedures and generate commissioning reports. Perform routine inspection and preventive maintenance on installed systems. Troubleshoot and repair system faults or malfunctions. Ensure systems remain compliant with applicable fire codes and insurance requirements. Maintain accurate records of system specifications, changes, tests, and maintenance. Ensure systems comply with legal standards (e.g., building codes, health and safety regulations). Generate reports for clients, authorities, and internal audits. Liaise with clients to understand their fire protection needs. Provide technical advice and guidance on fire alarm standards and best practices. Train end users on the use and functionality of systems. Stay updated on new fire alarm technologies and regulations. Ensure all work is performed safely and in line with risk assessments and health & safety procedures. Assist in other engineers, apprentices, or technicians. Share knowledge on fire alarm systems, standards, and troubleshooting techniques. Help develop standard operating procedures and training materials. Provide technical input during the procurement of fire alarm equipment. Assist in managing stock of commonly used components and replacement parts. Review supplier documentation for compliance with specifications. Contribute technical details or system specifications for project bids or proposals. Assist with the estimation of time and materials. Participate in site surveys to support pre-sales or scoping phases. Support project managers in tracking progress of fire alarm system installations. Help ensure coordination with other systems (e.g., HVAC shutdowns, access control integration). Attend coordination meetings with contractors and consultants. Collaborate with security, BMS (Building Management Systems), or emergency lighting teams. Assist in integrating fire alarms with other life safety systems (e.g., sprinklers, voice alarms).About you: GCSEs Technical diploma or vocational qualification in Electrical/Electronic Engineering, Fire Safety, or a related field (e.g., City & Guilds Level 3, BTEC, NVQ). FIA (Fire Industry Association) Fire Detection & Alarm Training (Units 1-5). BS 5839 knowledge (design, installation, commissioning, maintenance). Manufacturer-specific certifications (e.g., Honeywell, Notifier, Gent, Siemens). ECS or CSCS card (UK) - for access to construction sites. Experience Minimum: 3 years of hands-on experience with fire alarm systems (maintenance) Understanding of fire alarm system components (e.g., detectors, call points, panels, sounders). Ability to read electrical drawings, wiring schematics, and floor plans. Familiarity with control panel programming and fault diagnosis. Basic IT skills (using testing software, reporting, etc.). Awareness of local fire codes and safety regulations. Positively Security Screened Health and Safety CompetentNo candidate will meet every single desired qualification we have listed. If your experience looks a little different but you think you can role; value to the role, we'd love to learn more about you!" For more information and to apply, contact Tyrhys at the Oxford branch of Berry Recruitment - (phone number removed) and click 'Apply Now' to submit your application. Please note that no terminology in this advert is intended to discriminate on the grounds of a person's gender, marital status, race, religion, colour, age, disability or sexual orientation. Every candidate will be assessed only in accordance with their merits, qualifications and ability to perform the duties of the job

TÜV SÜD – A global leader in the field of testing, inspection, management system certification and product certification renowned for quality, integrity and technical excellence. Established more than 150 years ago in Germany, TÜV SÜD is a leading global provider of technical services with more than 28,000 highly skilled employees across 1,000 offices worldwide. TÜV SÜD offers a wide range of testing & product certification, inspection, auditing & system certification, training and knowledge services. We are a premium quality, safety, and sustainability solutions provider. The Vertical Transportation Consultant role incorporates design, project management and maintenance account management services to major clients and projects. Main Duties & Responsibilities: • Site surveys, evaluation and assessment of existing lift and escalator installations, • Produce client reports with recommendations and solutions, • Produce technical and performance specifications, • Analysis of contractor proposals and production of tender reports, • Project management of refurbishment and new installations, • Quality auditing of existing installations for maintenance reporting, • Principal designer duties, • Client account management – liaising with contractors to ensure delivery of their contracted services, • Preparation of fee proposals, invoicing and credit control for projects and service client responsibilities, • Seeking and generating new clients and projects, • Producing Excel spreadsheet reports, graphs, and data, • Proofreading technical reports, • Assist in debt chasing, • Assist in completion of PQQ and tender questionnaires and documentation Essential Criteria: • Previous experience in lift industry operational roles, • BTEC HNC Mechanical or Electrical, or higher qualification, • Account management experience for major national client/portfolio, • Knowledge of MF/1 contract, • Previous VT experience, • Knowledge of MS Excel, • Lift management experience, • Commercial experience (sales), • Health and safety qualification, EOR202 safe working on lifts a minimum, • Demonstrable ability to produce client reports Desirable Criteria: • Experience with traffic analysis, • Qualified and experienced site-based Lift Engineer to Technician NVQ4 or equivalent Further Information TÜV SÜD in the UK offers a competitive salary and benefits package that includes a minimum of 33 days holiday entitlement (for full-time employees, including public holidays), a contributory Group Personal Pension Plan and a non-contributory Group Life Assurance Scheme. We also offer various Salary Exchange/Sacrifice schemes (buying/selling holiday, cycle to work scheme, pensions), incentive schemes and comprehensive wellbeing support (Employee Assistance Programme, Dental Scheme and Occupational Health services). Dependent on their role, employees may also be eligible for hybrid/permanent home-working, a Company Car/Car Allowance and Private Medical Insurance. We test, we audit, we inspect, we advise. We never stop challenging ourselves for the safety of society and its people. We breathe technology, we strive for professional excellence, and we leave a mark. We take the future into our hands. We are TÜV SÜD

Junior Project Manager (Electrical Bias) Location: London Salary: £45,000 – £50,000 (DOE) + package Sector: Electrical / Building Services / Commercial Fit-Out / Design & Build The Opportunity An ambitious and fast-growing London-based engineering contractor is seeking a Junior Project Manager with a strong electrical bias to join their project delivery team. This is an excellent opportunity for an electrically qualified professional who has progressed from an engineering, site management, or project coordination background and is now looking to step into a client-facing project management role. The business delivers high-quality electrical design-and-build solutions across commercial fit-out, refurbishment, landlord works, CAT A / CAT B fit-outs, infrastructure upgrades, and specialist electrical installations across London. You’ll work closely with senior project leadership to support the full lifecycle delivery of multiple electrical packages, gaining exposure to pre-construction, commercial oversight, technical coordination, programme management, subcontractor management, and client liaison. This role offers genuine progression into full Project Manager status. Key Responsibilities Project Delivery Support Assist in managing multiple electrical projects from pre-construction through to handover Support project planning, sequencing, and delivery strategy Help ensure projects are delivered safely, on programme, within budget, and to specification Monitor progress against project milestones Assist in identifying delivery risks and implementing mitigation strategiesTechnical Coordination Review and interpret electrical drawings, schematics, and technical specifications Coordinate electrical design information between consultants, subcontractors, and internal teams Assist with design development reviews and technical workshops Ensure installation works comply with relevant standards and project requirements Support value engineering exercises where appropriateSite & Contractor Management Coordinate subcontractor activities on site Attend site meetings and progress reviews Monitor quality of installation works Support inspection and snagging processes Assist with commissioning coordination and handover documentationCommercial & Financial Oversight Assist with procurement schedules Support package tracking and cost control Review subcontractor progress against applications/payment milestones Help manage variations and change control Monitor labour/material/resource allocationClient & Stakeholder Liaison Attend client meetings alongside senior PMs Produce project updates and progress reports Support communication across all project stakeholders Build strong working relationships with consultants, clients, and delivery teamsCompliance & Documentation Ensure compliance with: BS7671 Building Regulations Health & Safety legislation CDM regulations Company QA procedures Maintain project records including: RFIs Technical submissions Progress reports O&M documentation Commissioning records Candidate Requirements Essential Electrical bias/background (qualified electrician, electrical engineer, or building services background) 2–5+ years’ experience within: Electrical contracting Building services M&E subcontracting Commercial fit-out delivery Experience supporting project delivery on live construction projects Strong understanding of electrical systems including: LV distribution Lighting Power Containment Emergency lighting Controls Strong communication skills Commercial awareness Excellent organisational ability Ability to work across multiple fast-paced projects

Lead Engineer - Wanted - Immediate Start! Location: North London/Watford | Salary: £35,000-£45,000 DOE Permanent, Full-Time Are you an experienced Electrician? Regional Recruitment are recruiting for an Lead Engineer to join a professional and growing electrical services company. This is a customer-facing, field-based role requiring a reliable, forward-thinking individual who can work independently and as part of a wider team. You will be responsible for carrying out electrical installation, testing, and fault diagnosis at client sites across the UK, maintaining high standards of safety, compliance, and customer satisfaction What's on Offer: Opportunities for training and further professional development. Supportive management and clear communication of work schedules. The opportunity to work with a reputable and professional electrical services provider Qualifications Essential: NVQ Level 3 in Electrical Installation 17th or 18th Edition Wiring Regulations Level 2 and Level 3 Technical Certificates Desirable: 2391 Testing & Inspection qualification (or 2392, with a booked test date) Gold JIB Card PASMA and IPAF certifications Roles & Responsibilities Carrying out electrical installation and testing works at agreed customer sites. Diagnosing and repairing electrical faults efficiently in line with training and company procedures. Working safely in a variety of environments, taking all necessary precautions to prevent danger and avoid injury. Liaising with the Operations Supervisor regarding work schedules and daily activities. Communicating effectively with staff and customers at all levels while on site. Maintaining excellent timekeeping, adhering strictly to start and finish times as detailed in work schedules issued in advance. Proactively identifying and preventing potential areas of customer dissatisfaction, including effective route planning and forward preparation. Maintaining a professional appearance and complying fully with company uniform standards at all times. Demonstrating flexibility and willingness to travel to any destination within the UK, including during emergency situations. Mentoring Apprentices/Trainee Engineers Technical Assistance/Support with difficult faults or Jobs Being willing to work unsocial hours when required, including Bank Holidays. Undertaking any other ad-hoc duties as directed by the company. Requirements As part of the role, you will also be expected to: Complete all required paperwork accurately, efficiently, and on time. Ensure all documentation is submitted to Head Office no later than the following Monday after works are completed. Send all data to the Operations Assistant in the correct format in line with company standards Health, Safety & Compliance All employees are required to: Comply with all employment legislation and relevant codes of good practice. Take reasonable care for their own health and safety and that of others in accordance with the Health and Safety at Work Act 1974 and associated legislation. Co-operate fully with the company and colleagues to ensure statutory and safety requirements are met at all times. About Regional Recruitment This position is being advertised by Regional Recruitment Ltd, an award-winning independent recruitment agency established in 2008.We specialise in permanent, temporary, and contract opportunities across the Commercial, Construction, Industrial, Technology, and Engineering sectors. If this Lead Engineer role is right for you - Click to apply below. To explore more roles available across the UK, please visit (url removed)

Job Title: Electrician Location: Kingston-on-Thames/Twickenham Salary: £26 an hour w/ Van and Fuel Card Job Type: Temporary to Permanent Daniel Owen are currently seeking qualified Electricians to carry out maintenance, remedial work, test, inspection, and EICRs within Social Housing. In this role, you will be responsible for carrying maintenance, remedial work and producing electrical installation condition reports (EICRs) daily, as well as performing remedial works when needed. The ideal candidate should be capable of both testing and carrying out remedial works efficiently and to a high standard. Requirements for the Electrician 2391, Level 3 Electric Installation, 18th Edition, Gold Card (desirable) Full UK Manual Driving License Experience in electrical maintenance and EICRsBenefits for the Electrician Van and Fuel Card Annual holidays once perm CIS self-employed Weekly payIf you are interested in hearing more about the vacancy, please apply to the advert or send your CV. Tags;Electrician,Electrical Tester,Electrical Engineer,Electrical,Electrical Maintenance,Electrical Repairs LON123

A rapidly growing and innovative facilities management provider is seeking a skilled Electrical Engineer to deliver high-quality electrical compliance and maintenance services across a diverse portfolio of customer sites nationwide. This organisation is known for combining cutting-edge technology, including IoT solutions, with dependable compliance services, all underpinned by a strong commitment to exceptional customer experience. The successful candidate will play a key role in installing, maintaining and repairing electrical systems, ensuring all work is completed in line with current regulations and industry standards. Acting as a trusted representative on client sites, the Electrical Engineer will be responsible for delivering both planned and reactive works efficiently, safely and to a consistently high standard. The role also involves carrying out proactive inspections, completing risk assessments, and ensuring all contractual service level agreements and performance targets are met. This position requires someone who can build strong relationships with customers and site teams, communicate clearly, and maintain a professional and approachable presence at all times. Accuracy in recording work, completing certification and managing documentation through internal systems is essential, alongside a proactive approach to resolving issues and escalating concerns where necessary. The role offers a varied working environment with travel to sites across the UK, including occasional overnight stays. There is also a requirement to participate in an out-of-hours rota. All necessary tools and uniform will be provided. Candidates should hold a full UK driving licence and be fully qualified to industry standards, including 18th Edition Wiring Regulations and a recognised electrical apprenticeship such as NVQ Level 3 with AM2 or equivalent. Inspection and testing qualifications are required, along with a JIB Gold Card. A minimum of five years’ post-qualification experience working across a range of electrical systems is expected. The ideal candidate will demonstrate strong organisational skills, excellent attention to detail and the ability to work independently with minimal supervision. Strong communication and IT skills are important, as is a customer-focused mindset and a positive, can-do attitude. This is an excellent opportunity to join a forward-thinking organisation that values its people, offers a supportive and collaborative culture, and provides genuine opportunities for personal and professional development in a fast-paced and rewarding environment. THIS IS A PERMANENT PAYE ROLE

Job Description Position: Mobile CAP Engineer Salary: up to £52,000 basic salary DOE Shifts: Monday – Friday - Days Powered Access Engineer Benefits: A competitive salary Genuine opportunities for career progression Company Pension Scheme Employee welfare programme About your new company: My client, a national provider of Powered Access and Plant equipment are looking for an experienced CAP Powered Access Engineer to join their rapidly expanding team. About your new Powered Access Engineering role: Routine maintenance, service and repair of Powered Access Machinery Repairs as necessary to ensure hire equipment is fit for purpose and operating efficiently. PDI inspection work. LOLER’s What you’ll need to succeed for this Powered Access Engineer role: Previous experience in Powered Access, Plant, Material Handling or HGV. CAP Licence (desirable) A passion for service Approachable and the ability to work in a team. Full UK Drivers licence Previous experience as a Powered Access Engineer is beneficial Next steps: If you are interested in applying for this CAP Powered Access Engineer role or you are looking for advise on your next career move, please you up-to-date CV via this advert or call Karla on (phone number removed). INDKA

We are looking for an experienced Senior Engineer to work as a member of our client's Fire & Security Systems Operations Field service team. You'll ensure effective delivery of PPM, Reactive calls and additional Small Works, ensuring compliance with all Legal and Regulatory requirements. You'll lead a team expected to carry out routine servicing, testing, inspection, repairs, and installation of Fire Extinguishers/associated equipment and products to the relevant legislative and qualitative standards, alongside appropriate documentation and records in a timely and appropriate manner. You should have excellent communication skills, alongside basic Microsoft Word and Excel literacy. You should be capable of working to high levels of Health and Safety Requirements and having previous experience in a similar role carrying out PPM, reactive calls and Small Works in the Fire & Security Systems industry. Service test and inspection experience to the relevant standards/codes are also expected including fault-finding techniques. You will also be expected to actively attend and participate in any company-initiated training to maintain an up to date knowledge of technical aspects of the role. The ideal candidate would have previous experience with PPM, Accident Reporting, or RAMS, alongside following Health and Safety Legislation, preferably in the engineering field. Sharing technical and problem-solving abilities and knowledge with colleagues alongside an ability to take initiative and work with little supervision is also ideal. In return our client offer excellent salary and benfits package

Senior Electrical Engineer London Salary - £50k-£65k area An award-winning environmental engineering consultancy based in London is looking to appoint a Senior Electrical Engineer to join their team - someone with a genuine passion for forward-thinking electrical design and the ambition to work on projects that most engineers simply never get near. This is not a practice that churns through repetitive work. The firm has built a strong reputation across cultural, heritage, education, and public sector projects, with a portfolio that includes theatres, listed buildings, arts centres, and landmark civic schemes across London and beyond. Work comes largely through long-standing relationships with architects, developers, and project managers who trust the practice to deliver something thoughtful and technically excellent - not just compliant. Their engineers are multidisciplinary by design. Rather than siloing people into narrow disciplines, the team receives direct training across all aspects of environmental design, giving individuals real breadth of exposure alongside genuine depth in their specialism. The Role This position is suited to a Senior Electrical Engineer who is motivated by the work itself - someone who is energised by technically complex, bespoke projects and who sees emerging technologies as an opportunity rather than a footnote. The successful candidate will take ownership of electrical design across a varied portfolio of schemes, working closely with the wider engineering and sustainability team. Key areas of focus will include: Electrical building services design across cultural, heritage, education, and public sector projects Battery storage systems, photovoltaics, and low-carbon electrical technologies Design delivery from early concept through to technical completion and site inspection Engaging directly with architects, clients, and project teams as a trusted technical point of contact Contributing to the practice's wider sustainability and environmental design approachAbout You Around 5 years' experience in electrical building services design within a consultancy environment A genuine interest in emerging electrical technologies - particularly batteries, photovoltaics, and future-focused systems Drawn to complex, technically interesting projects - theatres, listed buildings, cultural venues - rather than high-volume repetitive work The ability to work independently and take considered ownership of design delivery Attitude and curiosity are as important here as technical experience - this is a practice that hires for mindset as much as skillset Experience in heritage or conservation projects is a plus, though not essentialThe Business Award-winning environmental engineering consultancy with offices in London and Bristol Portfolio spanning cultural, heritage, education, conservation, and residential sectors Multidisciplinary team structure - engineers trained across all aspects of environmental design Recognised as a top 50 employer in Building magazine's Good Employer Guide Competitive salary with annual performance bonus BUPA health cover, life insurance, and critical illness cover 4-5% pension match Cycle to work scheme, on-site showers and storage A collaborative, creative working environment - central London offices with good transport linksThis is the kind of role that suits an engineer who wants their work to mean something - where the next project might be a West End theatre, a Grade I listed institution, or an innovative new cultural space, and where the technical challenge is always real. Calibre Search promote equality in the workplace and we welcome applications from all suitably skilled or qualified candidates regardless of their sex, race, disability, religion/beliefs, sexual orientation or age. We act as both an employment agency and employment business

GBR Recruitment are working exclusively with a leading Asphalt & Cement Plant Machinery installation company, recruiting for a field based Electrical Service Engineer to carry out Electrical Engineering works on UK & Ireland customers Asphalt & Cement manufacturing sites. Travelling UK wide & over into Ireland, you will carry out Electrical fault finding & diagnostics services, repairs, commissioning of new machinery & the retrofitting of any new machinery / production lines within a Heavy Plant environment (Fixed Heavy Plant Machinery, not mobile). In this key Service Engineers role, you will have strong rounded Electrical skills, including strong knowledge & experience of Electrical Control Panels / Electrical Control Systems, plus some PLC skills (Siemens, Allen Bradley, Mitsubishi). You will have had previous exposure to some form of Fixed Heavy Plant Machinery within Asphalt, Cement, Recycling, Biomass, Power Generation or similar Industrial Plant Machinery, working on various machinery such as Electrical Control Panel Systems, Coal Burners, Gas Burners, Oil Burners, Boilers, Drum Dryers, Dust Collectors, Elevators, Vibrating Screens, Fillers, Weighers, Mixers, Storage, Bitumen Supply Systems, Crushers, Pre-Heaters, Kilns, Proportioning Equipment, Grinding Mills, Silo’s, Coolers, Conveyor Systems & more. This role will require the suitable applicant to be away from home most of the week or all the week (up to 5 days, Monday to Friday) so you must be prepared to travel to different customers sites up & down the country, plus over into Ireland. Duties: • Aftersales Service Engineering (Electrical) duties on Asphalt & Cement works, electrical installation, including fault finding, diagnostics, technical advice & guidance, repairs, commissioning of new machinery & new lines, plus retrofitting new machinery / parts., • Working across a vast array of Asphalt & Cement works Plant Machinery (fixed) across both the UK & Ireland, • Working on Electrical Control Panels & Electrical Control Systems, • Working on PLC's, • Consultative approach with all clients on their sites (Plant Directors, Managers etc.)., • Reading Electrical Technical Drawings., • Working on HV & LV., • Calibrating pressure, temperature, level, weighing, instrumentation & analytical equipment., • Inspection & Testing of Electrical Machinery / Parts & Components., • Some Mechanical Engineering tasks. Experience / Attributes Required: • Electrical Engineering Professional (time served apprenticeship / HNC qualifications or other)., • 18th Edition IET Reg's, • Asphalt &/or Cement Plant Machinery experience or similar High Capital Heavy Plant Machinery such as Recycling, Biomass, Power Generation etc. (fixed plant / heavy plant machinery)., • PLC experience, • Automated machinery experience, • Electrical Control Systems experience, • Gas & Oil Burners experience, • Boiler experience, • Fault finding, diagnosing, commissioning & retrofit experience, • HV & LV experience, • Happy to work away from home most days across Monday to Friday & to travel the UK / Ireland (this is a must) Fantastic Benefits including £600 per month stay out from home bonus on top of the advertised salary above (£7.2K p/a extra), Company Van, Enhanced Overtime Rates (x1.5 rate in M-F, x2 Weekends), 7% discretionary bonus, Health Insurance Scheme, 33 days annual holiday & more. If you are an Electrical Engineer, Multi-Skilled Engineer, Electrician, Maintenance Engineer, Shift Engineer, Manufacturing Engineer, Project Engineer or similar then this could be a great opportunity for you, working within a highly progressive business. Immediate start available. & fantastic earning potential

Murphy is a leading international, specialist engineering and construction company founded in 1951 with a purpose to improve life by delivering world-class infrastructure. Operating in the United Kingdom, Ireland, Canada and America, Murphy provides better engineered solutions to infrastructure sectors including transportation; natural resources; energy and water. Headquartered in London, Murphy has a number of related businesses – Ground Engineering; Utility Connections; Murphy Plant; Murphy Process Engineering; Pipeline Testing Services; Specialist Welding Services; and Electrical Services. Murphy is a specialist in delivering pipelines, design, structural steel, tunnelling, fabrication, bridges and piling, and has a substantial holding of plant, equipment and facilities. Murphy employs around 4,000 engineers, professional managers and skilled operatives around the world. Together, they work as ‘One Murphy’ - directly delivering the people, plant and expertise needed to make projects a success. Visit (url removed) or follow us on LinkedIn, Facebook, Instagram and X: #MoretoMurphy A day in the life of a Murphy Section Engineer: Checking Inspection Test Plans Checking setting out protocols of sub-contracted site engineers, review and agree a method to carry out consistently. Checking Installation on site is correct according to specifications. Assisting the Design Team with identifying setting out requirements on projects. Review the Design Information prior to works commencing. Checking that correct Quality Control is adhered to. Resolving technical problems at all levels. Ensuring activities are carried out in safe manner in accordance with the Project Safety Plan. Ensure equipment is calibrated, in date and suitable checked in accordance with company policies and the manufacturers' defined requirements. Ensure construction operations are carried out in accordance with the Contract requirements using the appropriate agreed procedures. Ensure all site personnel have clear, accurate and appropriate information to carry out their duties. Minimises environmental disturbance during construction works. Supervises the outputs and confirms that the project environmental requirements are met. Close liaison with the Project Team. Ensure that only the latest issue drawings and documents are being used. Assist the Site Management team to update KPI's, material reconciliation and progress reports Engineering Duties Mirror the Murphy Values of Safety, Leadership, Integrity and Respect in all behaviours Still interested, does this sound like you? Engineering qualification from a reputable firm IT Skills: Microsoft Office, Excel and Word proficiency Able to articulate engineering concepts verbally to stakeholders and in written communication Previous experience as an engineer on a civil engineering project Driver’s license Safety training IOSSH and/or SSSTS or SMSTS The post-holder will be expected to behave at all times in a manner consistent with the Murphy values of Safety, Leadership, Integrity and Respect. Relevant tickets for site-based work Profile

Job Title: Fire Damper Engineers (x4) Location: Guernsey Island Overview We are looking for 4 experienced Fire Damper Engineers to join an 8-week project in Guernsey. This is a rotational assignment with flights, accommodation and daily food allowance fully covered by the client. Pay £300 per day Project Details Travel date: 10 May Project start: 11 May Duration: 8 weeks Rotation: 10 days on / 10 days off throughout the project Working days during rotation: Monday – Sunday Working hours: 08:30 – 16:30 (8 hours per day) What’s Included Flights paid by the client Hotel accommodation provided £25 per day food allowance (capped) Key Responsibilities Carry out inspection, testing and maintenance of fire dampers in accordance with fire safety regulations and industry standards Complete drop testing and functionality checks of fire dampers Identify faults, defects and non-compliance issues and carry out remedial works where required Accurately record findings and produce compliance reports and certification Work closely with site teams and follow all health & safety procedures Ensure all work meets BS 9999 / BS 9991 and relevant fire safety legislation Maintain tools, equipment and materials in safe working condition Communicate progress and issues clearly to supervisors and project managers Requirements Proven experience working as a Fire Damper Engineer Relevant fire safety certifications and competency Ability to work rotational shifts away from home If not a UK national, must hold Settled or Pre-Settled Status Experienced engineers available from May and open to working overseas are encouraged to apply. Contact Denis on WhatsApp (phone number removed) or call (phone number removed)

Electrical EngineerLocation: Mobile around LondonSalary £35k-£45k + OTEWe are recruiting an experienced Electrical Engineer to join our growing team. This is a great opportunity for an Electrical Engineer to work on a mix of reactive and planned works in a supportive environment.As an Electrical Engineer, you will carry out electrical installation, maintenance, testing, and inspection while ensuring compliance with regulations and company standards. The successful Electrical Engineer will be reliable, professional, and comfortable working independently and with clients.What We OfferCompetitive salary (dependent on experience)Career progression and development opportunitiesSupportive team environment20 days holiday + Bank HolidaysKey ResponsibilitiesElectrical installation, maintenance, testing, and inspectionReactive callouts and planned worksComplete job sheets, reports, and certificationEnsure compliance with electrical and H&S regulationsLiaise with clients and internal teamsKey Skills18th Edition qualifiedCity & Guilds 2391 (or equivalent) preferredExperience with first and second fixStrong fault‑finding skillsAble to work independently and as part of a teamAll offers are subject to pre‑employment checks and a DBS check.If you have not heard from us within 30 days, please assume you have not been successful on this occasion.KeywordsElectrical Engineer, Electrician, 18th Edition, Inspection & Testing, Electrical Maintenance, Mobile Engineer, Commercial Electrical

Quality Engineer: Purpose of the Role: • To support the implementing, maintaining and improvement of the Project Management System providing support and advice to the Project team on quality management matters. Role Accountabilities: • Interpret and advise on quality system requirements for the Project. - Supporting the development, implementation, maintenance and improvement of the Project quality management system. - Utilising quality management tools and techniques to promote continuous improvements throughout the Project team - Coordinate with the Client's quality management team. - Support Project team in development and review of inspection and test plans. - Prepare regular quality reports for the Project Manager. - Support the Project team to maintain and develop the non-conformity register and corrective action register. - Support the Project team with the development of systems to ensure handover documentation is managed in a timely manner. - Undertaking internal Project audits and supplier audits. - Reporting on audit findings, agreeing corrective action with auditees and monitoring close out of findings. - Promoting quality awareness throughout the Project team - Behaving in a way that is aligned with core values. - Co-operate with in all matters relating to health and safety, including following safe working procedures at all times. - Promote equality in the workplace and adopt appropriate behaviour when interacting with colleagues. - Take necessary care to properly protect the confidentiality, integrity and availability of corporate information from unauthorised disclosure, modification or destruction. Never knowingly put information systems at risk. - Monitoring the effectiveness of the document control system, Themis, on site - Support the Site Document Controller - Ensuring the HOCHTIEF compliance tool is used on all sites Additional Duties: • Any other duties consistent with your status and seniority, as necessary to meet the needs of the Business of the Company. Key Safety Responsibilities: • Please see separate individual responsibilities for Health, Safety, Quality and Environmental (HSQE) matters attached

Manufacturing Engineer/CNC Programmer Romford Full time, permanent Salary: £38,000 – £52,000 per annum ABOUT THE CLIENT Our client is a leading precision engineering and aerospace manufacturing specialist supplying high-integrity machined components and assemblies. Operating under strict aerospace regulatory frameworks, the business delivers complex machined parts to major aerospace and defence customers, working to AS9100 standards. They combine advanced CNC machining capability with strong engineering, NPI and process-control disciplines, ensuring excellent quality, repeatability and compliance across all product lines. ROLE PURPOSE The Manufacturing Engineer & CNC Programmer will generate CNC programmes for 3-, 4- and 5-axis machining centres while developing and optimising manufacturing processes for new and existing products. The role requires strong manufacturing engineering experience and precision machining knowledge, especially within aerospace environments. You will create tooling plans, inspection requirements, routings, workholding and process documentation to support controlled, efficient and compliant production. A key responsibility is improving workflows, equipment layouts and overall manufacturing efficiency, while ensuring the lowest possible cost without compromising quality. KEY RESPONSIBILITIES & DELIVERABLES CNC Programming & Process Development Prepare CNC programmes from planned processes using CAD/CAM software (GibbsCAM preferred). Develop tool definitions, setup sheets, tooling plans and related documentation. Prove out CNC programmes into production and optimise for efficiency and repeatability. Own all supporting process elements including routings, tooling, gauges, fixtures, test equipment and CNC files. Manufacturing Engineering Determine materials, tooling and methods to meet product specifications at lowest cost. Analyse and plan workflow, space utilisation and equipment layout for efficiency gains. Improve current operations to enhance quality, output and cost performance. Support the development of transparent cost structures and identify cost-reduction opportunities. Ensure all processes comply with the Quality Management System and aerospace requirements (AS9100). Produce process documentation to strengthen process control. Research emerging manufacturing technologies to support long-term business strategy. REQUIRED EXPERIENCE Strong proficiency in CAD/CAM software for 3D model generation and CNC programming (GibbsCAM preferred). Skilled in machine tool selection, cutting tool specification and application. Ability to interpret technical drawings, specifications and engineering documentation. Experience using SOLIDWORKS. Knowledge of precision engineering processes including milling and turning. Prior experience working to AS9100 or similar aerospace standards. Ability to plan workloads and work to deadlines within a fast-paced production environment. QUALIFICATIONS Degree / HNC / HND (or equivalent) in Mechanical, Manufacturing or Aerospace Engineering. Experience in a manufacturing or production engineering role within a precision engineering organisation (aerospace preferred). Trained and qualified in relevant CAD/CAM software systems. PERSONAL CHARACTERISTICS Strong analytical and problem-solving capabilities with rapid containment decision-making. Excellent communication skills across all levels of the organisation. Ability to simplify complex problems and prioritise effectively. High levels of integrity, accountability and ownership. Highly motivated, self-managing and results-driven. Customer-focused approach with a desire to drive continuous improvement. ADDITIONAL / DESIRABLE SKILLS Previous experience using GibbsCAM (or similar CAD/CAM software). Ability to measure, analyse and present capital investment opportunities for new technology. Project management skills advantageous

Job Title: Section Engineer Job location: Canterbury Works Vent Shaft (Apply online only) Canterbury Rd, London NW6 5FR Working hours: Monday-Friday 7:30am-5:30pm Role Working from Canterbury Works Ventilation Shaft. Plan and then deliver a section of works working under the Sub Agent and Agent. Manage and drive the engineering aspects of a section of the works, developing and reporting of section programmes and budgets and ensuring that the works are conducted in accordance with the project requirements including health and safety. Liaise between different site disciplines to ensure effective planning and use of project resources. Manage and drive the training and development of the Site Engineering team. Key Responsibilities - Managing and co-ordinating the activities of the site engineers to ensure all setting-out and quality control procedures are performed in a timely and efficient manner, so as not to impede the construction programme. - Develop 6-weekly programmes with site engineers and simple benchmark productivity measures for the workforce and assess actual programme and productivity achieved for review at weekly progress meetings to include resource requirements. - Complete inspection and test plans, risk assessments and method statements for the control of the works ensuring that all necessary documentation, as required by these statements and plans, is produced in a timely manner. - Communicate with works managers, foremen, gangers, workforce and sub-contractors to ensure full understanding of information provided. - Communicate to the QA and QS teams non-conformances, and any instructions received from the client / designer. Ensure that comprehensive records of resources employed on additional works are maintained. - Manage the design through raising RFI's and FCD's ensuring that the design has been reviewed an approved prior to construction and is fit for purpose. - Procurement of Plant, Materials and Equipment through Requisitions. - Keep a full and accurate daily site diary, including any changes/variations, subcontractors' attendance, and records of work related discussions with client/designer/Construction Manager/project team. - Manage the assurance and handover process for a section of works - Adherence to project policies and procedures. Required qualifications, skills, behaviors and attributes Essential: - Degree level qualification in a Civil Engineering allied subject or HNC in Civil Engineering and vocational training in Engineering - Understanding of Engineering Principles - Technical knowledge of construction techniques and best practices. - Computer competence (MS Word, Excel, Document control system). - Relevant CSCS Card, SMSTS - Training in Health & Safety and Environmental management - Presentation Skills Training (as they deliver inductions / briefings etc). Desired: - Computer competence (CAD, Primavera software, Synchro). - Temporary Works Supervisor or Coordinator Trained - Appointed Person for Lifting Operations Trained - MEWPS for Managers Trained - First Aid Trained - Fire Marshall Trained - Relevant Experience with a Teir 1 Contractor

Our client, a specialist contractor within the utilities and infrastructure sector, is seeking an experienced Section Engineer for projects across East London. The business delivers a range of civil engineering and utility infrastructure works, including new sewer installations, manhole construction, drainage diversions, and associated groundwork packages on major UK infrastructure schemes. Responsibilities of Section Engineer: Preparing and reviewing project documentation, including: RAMS (Risk Assessments & Method Statements) Permits to Work ITPs (Inspection & Test Plans) Temporary Works documentation Assisting with programme development and buildability assessments Coordinating with clients, water authorities, and principal contractors Setting out for drainage and sewer infrastructure works Managing Site Engineers and site operatives Supervising groundwork, temporary works, and permanent works activities Overseeing construction of new manholes and sewer networks Ensuring works are delivered in line with quality standards, specifications, and health & safety requirements Liaising with Temporary Works Coordinators and design teams Producing as-built drawings Preparing QA documentation and project handover packs Supporting project completion procedures and client sign-off Skills & Experience Required for Section Engineer: Essential Experience working as a Section Engineer or Senior Site Engineer within drainage, sewage, utilities, or civil infrastructure projects Strong knowledge of groundwork, temporary works, and permanent works Experience delivering new manhole and sewer construction works Competent in setting out Experience leading site teams and supervising engineers Strong understanding of QA and construction documentation, including RAMS, ITPs, permits, and as-built records Experience working with water authorities and principal contractors Valid CSCS card Desirable Experience on major UK infrastructure projects Confined Space certification Temporary Works Supervisor (TWS) qualification or similar Appointed Person (AP) qualification beneficial

1st Step Solutions are supporting a leading M&E contractor who have an opportunity for a Field Quality Engineer on a permanent basis based in London. Our client delivers complex engineering solutions across data centres, building services, energy and industrial sectors. The Role: Field Quality Engineer (M&E) to strengthen quality across UK operations. This is a hands-on, site-facing role focused on ensuring right-first-time delivery across mechanical and electrical packages: from installation through to commissioning and handover. You'll work across multiple projects, supporting teams on site, driving standards, and resolving quality issues before they impact programme or client delivery. Key Responsibilities: You'll take ownership of quality across M&E works, including: Implementing project quality plans, ITPs and inspection regimes Ensuring installations meet specifications, drawings and standards Leading audits, inspections and quality reviews across sites Managing NCRs, defects and corrective actions Supporting testing, commissioning and handover readiness Verifying materials, plant and equipment before installation Monitoring subcontractor and supplier quality performance Tracking quality KPIs and reporting to project and senior teams * Driving continuous improvement and right-first-time delivery You'll play a key role in protecting programme, reducing rework and ensuring a high standard of delivery across every project. Requirements: Our client is looking for someone who understands how M&E projects are delivered and knows where quality issues typically arise. Experience in M&E construction (building services, data centres, energy or industrial) Strong understanding of QA/QC processes and inspection systems Ability to read drawings, specs and commissioning requirements Experience managing defects, NCRs and root cause analysis Comfortable working across multiple live sites Strong communication and stakeholder management skills You may come from a mechanical, electrical or building services background Qualifications: Degree in Mechanical, Electrical or Building Services Engineering (preferred) Or strong trade/technical background with QA/QC experience Knowledge of ISO 9001 (essential) Membership of CIBSE, IET, Engineers Ireland or CQI (advantageous) Why Join our client: Work on high-value, technically complex M&E projects Be part of a business known for delivery, quality and growth Strong pipeline across the UK and Europe Opportunity to influence standards across multiple projects * Clear scope to grow into senior quality or regional roles On Offer: Competitive salary Car/Travel allowance 25 days annual lave plus bank holidays Private health care Pension scheme Bonus scheme

Job Title: HGV Technician Location: Enfield Salary: £56,770k Shift: Monday to Friday (7am to 530pm) Overtime: Paid at an enhanced rate An exciting opportunity has become available working for a very well-established fleet maintenance company. Specialist training will be provided where needed to develop your existing skills to support their specialist assets. Key Responsibilities of the HGV Technician: As an HGV Mechanic you will undertake routine inspection & repair of internal & external customers vehicles within the workshop Undertake commercial vehicle MOT inspections, repair, and final preparation for MOT test Attend breakdowns, diagnose, and complete necessary repairs to a high standard Complete all compliance paperwork associated with the repair and maintenance of the rental fleetRequirements for this HGV Technician role: Experience from within an HGV Technician/ HGV Mechanic/ HGV Engineer role Municipal experience including working on Refuse trucks/ RCVs is a plus Repairs and wheel alignment HGV Technical qualification - NVQ or City and Guilds equivalent. Experience of working in a similar role with an understanding of the HGV industry Great team player whilst also able to work on own initiative Awareness and understanding of Health and Safety practicesBenefits for working for my client: 33 Days annual leave (inclusive of statuary) Enhanced parental leave and pay Company Sick Pay Employee Assistance Program Wellbeing programme, including online health advice & GP Retail discounts Dedicated training and development to support your career with our business Recommend a friend bonus (Up to £2,000!) Death in Service (available from day one of employment) Free onsite parking Free uniformHow to Apply Interested? For more details or to discuss your next career move, contact Macy at Kemp Recruitment on (phone number removed) Reference: INDMM

Fire Door Engineer Fire Door Engineer / Field Service Engineer. A London based fire protection / fire safety firm are looking for a Fire Door Engineer / Field Service Engineer with responsibility for completing refurbishment, maintenance, inspection and delivering a high level of workmanship. Responsibility for completing the refurbishment, maintenance, inspection and always delivering a high level of workmanship. Working in a team and independently when required Liaise with management team daily. Perform inspections and assessments of existing fire-rated doors to identify any repairs or replacements needed. Install fire-rated doors in accordance with fire regulations, safety regulations, and manufacturer guidelines. Install and maintain fire-rated door hardware, including locks, hinges, closers, and panic devices. Ensure compliance with fire safety regulations, including fire ratings, smoke sealing, and door clearances. Maintain accurate records of door installations, repairs, and inspections. Adhere to safety protocols and use personal protective equipment (PPE) when necessary. Maintain a clean and organized work area, ensuring tools and equipment are properly maintained. Travel to multiple sites as required. Experience & Skills UK Driving License (required) All aspects of fire door Inspection, installation and maintenance. (required) Solid understanding of fire safety regulations, carpentry techniques, and possess strong attention to detail. (required) NVQ 2 Carpentry (required) Health & Safety awareness, and safe working Basic salary up to 45k plus discretionary bonus, van, holiday, pension and more benefits

Graduate Mechanical Engineer 2026 About Ferrovial Construction UK&I Ferrovial Construction is the UK based engineering and construction arm of the Ferrovial Group. It is the largest private transport infrastructure operator in the world in terms of capital invested. We have a presence across 15 countries with over 60 years’ experience. It is a Spanish multinational company operating through 4 divisions; Airports, Highways, Construction and Building subsidiaries. Ferrovial are committed to developing sustainable and innovative solutions, with the aim to create value for society, and for clients, investors and employees. We design and construct some of the UK and Ireland’s most high-profile transport infrastructure projects. We have the strength and depth to deliver complex major projects in-house, drawing on international expertise and full asset lifecycle capability. We provide our clients with cost-effective, value-added solutions and design and build sustainable assets for people and places. We maximise potential through continuous professional development and create an equal, inclusive and diverse place to work to drive innovation. At Ferrovial, we have five core values: Excellence, Innovation, Collaboration, Integrity and Respect. We are proud of our work and values which we live by to achieve our goals. Whilst working on large complex projects, you will be encouraged to achieve your maximum, all the while having support and guidance. An ability to work well in a team is key to the delivery of our projects, so that effective communication skills are critical. Ferrovial prioritises the mobility of its employees as a means of fostering talent. The company has set up a Global Mobility Portal, which operates as an internal job board where employees can find all openings worldwide. The company is keen for graduates to move overseas and gain experiences of different cultures and business ways and methodologies. Please note this opportunity is an option after the Graduate Programme unless you have a civils background. The role Ferrovial Construction is looking for Graduate M&E Engineers to assist with, and in some cases be responsible for, day to day activities on a variety of major UK infrastructure projects. The Ferrovial 2-year graduate development programme is designed to develop personal, professional and technical skills through a blended approach. You will work under the supervision of Section/Project Managers and in collaboration with the site team. Key Responsibilities Contribute to the achievement of Health and Safety in accordance with company policy and ensure quality on our projects is upheld. Key Accountabilities To focus on mechanical systems including developing polices, standards, inspection procedures, and evaluation tools for M&E matters. To assist in the co-ordination of the team activities to ensure that the project is completed within the budget in line with the cost plan, and on time in line with the agreed construction process. To work with the procurement team to ensure compliance with financial parameters. To assist in ensuring the project complies with health, safety, environmental and quality requirements. To assist the Project Manager on the management of the team, giving advice on appropriate resourcing levels, effective performance management, employee development and motivation. Adopting and promoting Ferrovial Construction UK Vision and Values. Taking ownership of the work assigned to you. Adhere to safe working practice regulations on site and ensure all staff comply with the requirement. Skills and Competence We are looking for graduates with: Excellent communication skills and ability to interact at a variety of levels Degree or Masters in Engineering (All disciplines considered) Motivated to learn and add value to the team, the role and the Graduate programme Analytical thinker who enjoys problem solving A proven team player who can effectively work with others Enjoys working under pressure to meet deadlines Proactive approach to working and learning Commercial awareness and an understanding of the industry Familiar with all Microsoft packages Interpersonal Skills Highly motivated Logical thinker with a willingness to learn Resilient and a flexible approach to working Results driven with strong communication skills Work independently with minimal supervision Desirable Knowledge of Health and Safety Legislation Engineering experience & CSCS Card Essential Must have right to work in the UK by the start of employment and for the duration of the Graduate Programme. What we offer On the Ferrovial Construction Graduate programme you will get: 2-year development programme in line with the UK engineering framework. Exposure to a diverse range of engineering disciplines Work with Contractors and Sub-contractors to develop effective partnerships Attend a variety of blended training to develop your technical, professional and behavioural skills You will start the process of becoming chartered with internal and external support You will either be given a project to work on or be given a small “Package” to manage from start to finish Gain an understanding of Ferrovial Construction from a global perspective, with mobility opportunities Given the opportunity to participate in charity volunteering and innovation projects. And much more! Other details The position is scheduled to start in September 2026 at the latest, if you wish to start earlier, we can accommodate this. Please note that this job description does not represent a comprehensive list of activities and employees may be requested to undertake other reasonable duties. Ferrovial Construction UK is an Equal Opportunities employer and as such treats applications equally and recruits purely based on skills and experience. We are committed to building an inclusive team from a variety of different backgrounds, perspectives and skills so we encourage candidates from underrepresented groups to apply

Telecoms Fibre Engineer / FTTP Engineer We are hiring for an award-winning company offering exceptional telecoms fibre training & fibre engineer job opportunities. Start date of Telecoms Fibre Engineer / FTTP Engineer • Immediately Pay of Telecoms Fibre Engineer / FTTP Engineer • Telecoms fibre engineer will be working from a rate card, If you work hard and put in the effort there is no cap on their earnings. Job Description of Telecoms Fibre Engineer / FTTP Engineer : • Completing Fibre Installations, • Overhead / Underground jobs, • Completing Fibre Surveying / Repairing Orders, • You will be given full and continuous training in this role, and support throughout your working day., • Site Inspection Evaluations Including, Traffic Management to be conducted, • Respond professionally and effectively to all customer requests and enquiries Key Requirements of Telecoms Fibre Engineer / FTTP Engineer : • Full UK driver's license with no more than 6 points on. Training provided for Telecoms Fibre Engineer / FTTP Engineer : • If you are successful in your application, you first day of engagement will be at one of our national training centres to complete your training., • Full attendance every day, Monday to Friday, is mandatory, missing days is not an option, as it will affect your ability to complete the course and progress within the role into your buddy period. Telecom Fibre Engineer / FTTP Engineer physical requirements: • The ability to lift objects regularly -The ability to safely climb ladders • The ability to bend and stretch with comfort, • The ability to wear personal protective gear correctly most of the day

Maintenance Electrician London £45,000 - £48,000 + Optional Overtime + Training + Progression + Growing Business + IMMEDIATE START A great opportunity for Maintenance Electricians to join a growing business within the electrical compliance sector. Enjoy a varied workload across commercial environments, with a strong focus on planned maintenance and reactive works. This role offers long-term stability along with the opportunity to gain additional qualifications and progress into areas such as electrical testing and compliance. Ideal for an Electrician looking to develop their skillset, increase earning potential and build a long-term career within a supportive and expanding business. This expanding electrical testing, compliance and remedials specialist is continuing to grow rapidly following multiple new contract wins. Operating across sectors including education, healthcare and commercial premises, they have built a strong reputation for quality and reliability. With a strong pipeline of ongoing work, they are now looking to bring in additional Maintenance Electricians to support their growing client base across London and the Home Counties. Your Role as a Maintenance Electrician will include: Carrying out planned preventative maintenance (PPMs) Attending reactive breakdowns and fault finding Completing remedial electrical works Travel to clients sites across London The successful Maintenance Electrician will have: NVQ Level 3 Electrical Installation (AM2) 18th Edition Wiring Regulations Experience in maintenance, PPMs and reactive works Background working within commercial environments * Full UK driving licence Please apply or call Tommy Reynolds for immediate consideration Keywords: Maintenance Electrician, Electrical Maintenance Engineer, Electrician, Commercial Electrician, Building Services Engineer, PPM, Reactive Maintenance, Electrical Testing, Compliance, Remedials, Fault Finding, 18th Edition, NVQ Level 3, AM2, 2391, Inspection & Testing, London, Greater London, Central London, North London, South London, East London, West London, City of London, Westminster, Canary Wharf, Croydon, Bromley, Bexley, Dartford, Watford, Enfield, Barnet, Romford, Ilford, Uxbridge, Slough, St Albans, Hemel Hempstead, Luton, Reading This vacancy is being advertised by Accelerated People Management Ltd. The services of Accelerated People Management Ltd are that of an Employment Agency. Accelerated People Management Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed

EICR Electrician London £45,000-£48,000 + Overtime + Bonuses + OTE £60,000-£70,000 + Training + Progression + IMMEDIATE START A fantastic opportunity for an EICR Electrician to join a growing business within the electrical compliance sector. Benefit from structured training, clear routes into supervisory roles off the tools and excellent earning potential through overtime and bonuses, with realistic OTEs of £60,000-£70,000. This role is ideal for an ambitious Electrician looking for stability, strong earnings and long-term progression within a supportive business. This expanding electrical compliance specialist has built a strong reputation for quality and reliability, leading to continued growth through new contract wins. With a strong focus on social housing and domestic electrical compliance, they are now looking for additional EICR Electricians to support a growing workload across London. Join a business with long-term contracts, strong earning potential and genuine progression opportunities. Your Role as an EICR Electrician will include: Carrying out EICR inspections to industry standards Completing remedial works to rectify electrical faults Diagnosing and repairing electrical issues in domestic properties Travelling to customer sites across London The successful EICR Electrician will have: NVQ Level 3 18th Edition Inspection & Testing 2391 Proven experience with EICR and remedial works Please apply or call Tommy Reynolds for immediate consideration Key words: Electrical Tester, Test and Inspection Electrician, Electrical Compliance, Electrical Maintenance, Maintenance Electrician, Maintenance Engineer, Electrical Fault Finding, Electrical Remedials, Electrical Inspection, Social Housing, Domestic, Commercial, Fixed Wire Testing, Electrical Engineer, Compliance Engineer, NICEIC, Electrical Supervisor, Electrical Installation, Electrical Reports, Electrical Certification, PAT Testing, Fixed Wire Testing, Greater London, Central London, North London, South London, East London, West London, South East London, South West London, North West London, North East London, Bromley, Croydon, Lewisham, Greenwich, Bexley, Dartford, Sidcup, Orpington, Beckenham, Chislehurst, Eltham, Catford, Peckham, Woolwich, Romford, Ilford, Barking, Dagenham, Stratford, Enfield, Barnet, Watford, Wembley, Hounslow, Ealing, Kingston, Sutton, Brentwood, Essex, Kent, Hertfordshire, Surrey This vacancy is being advertised by Accelerated People Management Ltd. The services of Accelerated People Management Ltd are that of an Employment Agency. Accelerated People Management Ltd can only accept applications from candidates who have a valid legal permit or right to work in the United Kingdom. Potential candidates who do not have this right or permit, or are pending an application to obtain this right or permit should not apply as your details will not be processed. We will endeavour to respond to all applicants however due to the sheer volume of response, we can only guarantee that candidates who have been shortlisted will be contacted