Trabajos test en ChertseyCrear alertas

Senior Metrology EngineerLocation : Near Woking, SurreyWorking Pattern : Primarily office-based, with UK and occasional international travelSalary: From £40,000, dependent on experienceHours : Monday to Friday, typically 9:00am to 5:15pm, with flexible start and finish timesBenefits for Senior Metrology EngineerCompetitive salaryCompany-wide commission scheme24 days annual leave plus bank holidaysWorkplace pension schemeFree on-site parkingOn-site gym and wellbeing activitiesUK and occasional international travelLong-term role within a specialist measurement technology businessIntroduction for Senior Metrology EngineerIndustrial Connected Talent is supporting a specialist measurement technology business in the search for an experienced Senior Metrology Engineer.This is a senior technical role focused on dimensional measurement, vision-based metrology systems and customer application support. You will act as a key technical resource for customers, sales teams and internal product development.Responsibilities for Senior Metrology EngineerAs Senior Metrology Engineer, you will provide technical expertise across measurement applications, system setup, calibration and product development. You will work with both hardware and software, helping customers achieve accurate and repeatable results.Provide expert support on dimensional measurement and vision-based metrologySet up, test and calibrate optical and vision measurement systemsAdvise customers on measurement methods, tolerances and accuracySupport demonstrations, training and technical problem-solvingWork with design teams to support new product developmentMentor less experienced engineers within the metrology teamTravel to customer sites in the UK and occasionally overseasRequirements for Senior Metrology EngineerThe ideal candidate will have at least five years experience within metrology, dimensional inspection or measurement applications. You should understand the principles behind measurement accuracy, tolerances and repeatability, rather than simply operating equipment.At least five years experience in metrology or dimensional inspectionStrong understanding of measurement principles, tolerances and accuracyExperience with optical, vision-based or non-contact measurement systemsAbility to interpret engineering drawings and advise on measurement methodsPractical experience setting up or calibrating measurement equipmentStrong customer-facing communication and technical problem-solving skillsWillingness to work primarily on-site near Woking and travel when requiredDesirable Experience for Senior Metrology EngineerExperience using MetLogix M3 softwareBackground with vision systems, optical comparators or CMM equipmentExperience in an Applications Engineer, Metrology Engineer or technical Service Engineer roleProduct development or design engineering support experienceTPBN1_UKTJ

At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity.The RoleReady to take the next step in your lift engineering career? We're looking for an NVQ Level 3 qualified Lift Engineer who is eager to develop into a Trainee Lift Tester . Based in Sunbury , you'll receive a structured development programme, including NVQ Level 4 training , hands-on mentoring, and technical training to help you become a fully qualified Lift Tester.Key ResponsibilitiesCarrying out pre-tests to company installations and modernisation's compiling snag list for engineers/trades etc as necessary.Onsite adjusting and testing of lifts to ensure adherence to Health and Safety legislation and lift regulations.Support with completion of test sheets and supporting company and client documentation as required.Using technical experience, specifically an understanding of lift control systems and electrical knowledge.Support other departments as necessary.If you are ambitious, safety-driven, and ready to take the next step in your lift engineering career, we would love to hear from you.Why Join ORONA?We offer more than just a job we offer long-term career development within a stable and growing company.What We Offer:Attractive Salary : Competitive pay that reflects your skills and experienceGenerous Holiday Allowance : Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidaysSecure Future : Benefit from a pension scheme with increasing company contributions as you grow with usPeace of Mind : Life Insurance to support you and your loved onesHealth & Well being : Medical Cash Back Plan to help with health costs, plus access to 24/7 GP servicesFamily-Friendly Benefits : Enhanced leave for family-related events and emergenciesSupport When You Need It : Employee Assistance Programme offering confidential support for personal or work-related challengesEye Care : Eye care vouchers to help keep your vision sharpRecognition for Longevity : Long Service Awards to celebrate your milestones with usReferral Rewards : Earn a Recruitment Referral Fee by helping us find top talentContinuous Growth : Ongoing Training & Development opportunities to support your career journeyJoin ORONA and be part of a company moving the world safely and efficiently every day.TPBN1_UKTJ

Multi-Skilled Fire & Security Engineer \n Salary: £21–£24 per hour, equivalent to £ per annumLocation: Woking, Surrey and surrounding areasHours: Permanent, full-time, field-based position, Monday to Friday. Paid travel and enhanced overtime available. \n Would you like to join a supportive engineering business where you can manage your own regional workload while receiving the backing, equipment and training needed to do the job properly? \n Our client is seeking an experienced Fire & Security Engineer to provide planned and reactive support to customers from their base in and around Surrey. Working across commercial premises, public-sector buildings and larger operational sites, you will be responsible for keeping a wide range of life safety and electronic security systems operating reliably. \n This is a varied field role combining servicing, fault diagnosis, repairs, upgrades and smaller installation works. Applicants should have broad fire and security experience, although particular value will be placed on engineers who are confident with CCTV, intruder alarms, access control and door entry systems. You should also be capable of servicing and fault-finding conventional and addressable fire alarm equipment without close supervision. The Role \n Your responsibilities will include: \n\n • \n Completing planned preventative maintenance visits across customer sites \n • \n Responding to system faults and breakdowns, identifying the cause and completing effective repairs \n • \n Servicing CCTV, intruder alarm, access control and door entry systems \n • \n Testing, maintaining and repairing conventional and addressable fire alarm systems \n • \n Carrying out small installations, system extensions, upgrades and equipment replacements \n • \n Inspecting panels, field devices, cabling, power supplies and networked equipment \n • \n Explaining faults, completed work and further recommendations clearly to customers \n • \n Producing accurate electronic job reports and service documentation \n • \n Ensuring work is completed in line with relevant standards, site procedures and health and safety requirements \n • \n Participating in an out-of-hours call-out rota, currently approximately one week in twelve \n\n You will usually work independently but will have access to technical support and additional engineering resources when required. About You \n We are looking for an engineer who can demonstrate: \n\n • \n Previous field-based experience within the fire and security industry \n • \n Broad knowledge of electronic security systems, including CCTV, intruder alarms and access control \n • \n Practical experience maintaining and repairing fire alarm systems \n • \n Confidence identifying faults across panels, detectors, devices, circuits and networked equipment \n • \n The ability to work efficiently across planned maintenance, reactive calls and small works \n • \n A professional and customer-focused approach when working on occupied sites \n • \n Good organisation and the ability to manage appointments across a regional territory \n • \n An understanding of relevant health and safety procedures and industry standards \n • \n A full UK driving licence \n\n Experience with manufacturers such as Gent, Advanced, Notifier, Morley, C-tec, Galaxy, Texecom, Hikvision, Dahua, Paxton, PAC or similar systems would be useful. \n Additional experience with gates, barriers, intercoms, disabled refuge or nurse call equipment would also be welcomed but is not essential, as product training can be provided. Salary and Package \n The basic rate is £21–£24 per hour, equivalent to approximately £42,500–£50,000 per annum, depending on experience. \n Travel is paid after the first 30 minutes of each journey, helping to ensure engineers are properly rewarded for time spent travelling to and from customer sites. \n The package also includes: \n\n • \n Evening overtime paid at x1.5 times the standard hourly rate \n • \n Late shifts and weekend work paid at x2 double time \n • \n Additional payment for call-out rota participation \n • \n Company van and fuel \n • \n Laptop, mobile phone, tools and test equipment \n • \n 25 days’ annual leave plus bank holidays \n • \n Healthcare provision \n • \n Company pension \n • \n Technical and manufacturer training \n • \n Opportunities to broaden your knowledge across additional systems \n\n This role offers the chance to join an established engineering team with a strong customer base, a manageable regional territory and a varied mix of service and technical work. It would suit a dependable engineer who wants competitive earnings, paid travel, regular overtime and the opportunity to continue building their skills across both fire and security systems. \n To apply, please submit your CV by clicking on the relevant links. If successful, you will be contacted by one of our consultants within 3 working days. Unfortunately, due to the volume of applications we expect to receive for this vacancy, if you do not hear from us within this time, you should presume your application has been unsuccessful on this occasion. \n Grassroots Recruitment is acting as a recruitment agency and a recruitment business in respect of this vacancy. Grassroots Recruitment is an equal opportunities employer and recruiter. We welcome applications from all sections of the community, regardless of age, race, sex, sexual orientation, marital status, religion or disability.

Hydraulic Project Engineer Egham-based | Hands-on engineering | Customer-site commissioning | Varied, high-value projects We’re looking for a practical, confident Hydraulic Project Engineer to take ownership of varied customer projects from build and test through to installation, commissioning and handover. You’ll work on low-volume, high-value hydraulic systems and sub-systems, combining hands-on engineering with project coordination, problem solving and direct customer support. If you enjoy seeing complex engineering projects through from the factory floor to a successful site installation, this is a strong opportunity to do varied, rewarding work. The role You’ll coordinate engineering design, manufacture, installation, commissioning and documentation to keep customer projects on track, on budget and aligned to specification.\n\n • Lead project implementation in-house and on customer sites, including international installations where required.\n, • Set up, test, calibrate and fault-find hydraulic systems before delivery and during commissioning.\n, • Work closely with internal teams to resolve issues, maintain schedules and report progress.\n, • Prepare and manage documentation, including risk assessments, safe systems of work and calibration certificates.\n, • Ensure projects meet relevant quality, machinery and health and safety requirements.\n, • Provide maintenance, service and technical support to customers when needed.\nWhat we’re looking for\n\n, • At least 3 years’ experience working with hydraulics in a manufacturing environment, ideally with low-volume, high-value systems.\n, • A strong all-round engineering background across mechanical, hydraulic, electrical, electronic and servo-control disciplines.\n, • Hands-on confidence with system setup, testing, calibration and fault finding.\n, • Experience with control systems; knowledge of industrial automation, real-time systems or similar technologies would be an advantage.\n, • Comfortable working directly with customers and travelling for site installations.\n, • HND, degree or equivalent experience in an engineering discipline; practical experience is especially valued.\nWhy join us?\n\n, • Work on varied customer projects, from specialist sub-components to complete hydraulic systems.\n, • Combine hands-on engineering with project ownership and customer-facing commissioning.\n, • Be part of a practical, skilled team delivering complex, bespoke engineering solutions.\n, • Receive training on our in-house operational software and project processes.\nLocation The role is primarily office and factory based at our production facility in Egham, with travel required for customer installations and commissioning.Interested? If you’re a hands-on hydraulic engineer who enjoys solving problems, leading practical project work and getting systems running successfully on site, we’d like to hear from you.

Manufacturing Engineer8 month contract – Outside IR35Immediate startSunbury on Thames Our client are a leading manufacturer providing specialist solutions to a variety of industries such as aerospace, power generation, rail and oil and gas industries. They are looking for an experienced Manufacturing Engineer to join the team.Manufacturing Engineer Working across operations, supply chain and design engineering to provide manufacturing engineering expertise in supporting existing and new products, defining new and supporting existing processes. You will assist in the implementation of strategic Lean initiatives throughout the Company, leading some Continuous Improvement projects.Main Duties/Responsibilities\n\n • Work with manufacturing cell leaders, lean co-ordinator and design engineering to improve process efficiencies\n, • Implement ‘Standard work’, generating & maintaining manufacturing documentation (SOP’s, Routings, “Visual Factory” displays)\n, • Creation & Maintenance of Routings in the MRP system\n, • Implement lean manufacturing methods (e.g. 1-piece flow lines, visual factory) to reduce throughput times, rework/scrap and work in progress\n, • Implement basic improvement tools, from 5S, 7 Wastes, Visual Management and Standardised Work balanced assembly lines where single (best) piece flow philosophies are employed\n, • Implement any required layout changes, ensuring both the facilities and maintenance teams are fully involved\n, • Support the Manufacturing Cells with their recording, and analysis of production data, and ensure the correct focus is placed on the main issues arising\n, • Initiate and / or lead improvement projects and CAPEX to enable new process and product introductions.\n, • Work with Engineering on product documentation modifications and parts obsolescence\n, • Provide day-to-day manufacturing engineering support for the production cells to enable customer schedule adherence (Fracas/concessions, change notes or MRB (material review board)\n, • Lead and work in teams to develop process FMEA, in their construction and implementation.\n, • Manage new product introductions and the manufacture of legacy products from release to production through the product life cycle.\n, • Mentor for cell leaders for improved methods of manufacturing assembly and test.\nManufacturing EngineerEssential Skills/Experience/Qualifications;\n\n, • 5+ years experience within a manufacturing/engineering environment, ideally for the aerospace industry\n, • Previous experience of NPI\n, • Experience of implementing Standard Work processes\n, • Proven record of successfully implementing Lean in an industrial environment (either as a co-ordinator or as a leader)\n, • A proven track record of generating and maintaining process maps, PFMEA’s and control plans\n, • Strong knowledge of lean manufacturing principles\n, • Experience of using problem solving techniques (5 Why’s, Fishbone/Ishikawa diagrams, 8D)\n, • Significant technical & problem solving experience in an electro-mech. manufacturing environment.\n, • Good time management with a significant track record of planning / managing complex long term projects. \n

Annual salary: up to £40,267.50 \n Plumber \n Location: Staines \n Contract: Full Time Permanent \n Salary up to £40,267.50 per annum, plus, company van & fuel card and OOH rota \n 42.5 hours per week (8-5 Monday- Friday) \n Pyramid Plus is a dynamic joint venture between A2Dominion and Mears Property Services, delivering high-quality repairs, maintenance, compliance, planned replacements, and fire risk assessment works. Serving over 23,500 homes, we complete more than 38,000 repairs, 1,000 void refurbishments, and install 600 kitchens and bathrooms each year. With a strong pipeline of upcoming projects, we’re entering an exciting phase of growth. This role offers the opportunity to be a key member of the senior management team, driving the successful delivery of our planning and customer service functions at the heart of our operations. \n We’re looking for an experienced and dependable Plumber to join our expanding team, supporting a busy responsive repairs contract in Staines. This is a practical, hands-on role where you’ll be responsible for carrying out a wide range of plumbing repairs and maintenance tasks in occupied social housing properties. \n From fixing leaks and replacing taps to diagnosing more complex issues with heating systems or drainage, you’ll be the go-to expert for keeping homes safe, functional, and comfortable. You’ll be working directly with residents, so a professional approach and strong customer service skills are essential. \n With a steady flow of work and a commitment to improving housing standards, this is a great opportunity to be part of a team that’s making a real difference in the community. We’re looking for someone who takes pride in their work, solves problems efficiently, and gets the job done right the first time. \n Duties: \n\n • Carry out responsive plumbing repairs in occupied properties\n, • Diagnose and repair leaks, blockages, and drainage issues\n, • Replace taps, toilets, cisterns, basins, and other sanitary ware\n, • Repair or replace pipework, valves, and fittings\n, • Investigate and resolve issues with hot water systems and radiators\n, • Ensure all work complies with current plumbing regulations and health and safety standards\n, • Record job details, materials used, and completion notes using handheld devices or job sheets\n, • Remove, repair, or replace bath panels as part of routine plumbing maintenance or to access pipework for leak detection and repair, ensuring panels are securely refitted and finished to a professional standard\n, • Maintain tools, equipment, and company vehicle in good working order\n, • Work respectfully in residents’ homes, maintaining a clean and safe environment\n, • Identify and report any additional works, safeguarding concerns, or property issues\n, • Participate in the out-of-hours emergency rota when required\n, • Adhere to all health and safety policies and procedures\n, • Provided high levels of customer care at all times\n\n Role Criteria: \n\n • Proven experience in domestic repairs and maintenance in a plumbing position\n, • Experience in Carpentry repairs and maintenance\n, • Full UK driving licence\n, • Ability to work independently and manage workload effectively\n, • Strong fault-finding and problem-solving skills\n, • Excellent customer service skills, with experience working in occupied homes\n, • Good understanding of health and safety regulations and safe working practices\n, • Ability to use handheld devices or job management systems to record work\n, • Willingness to participate in out-of-hours emergency rota\n\n Benefits we can offer you. \n\n • 25 days annual leave plus bank holidays\n, • Annual Mears Fun Day - Our annual Fun Day is organised as a massive thank you from the Executive team for all the hard work!\n, • Volunteering Leave - Mears supports employees to undertake paid volunteering in the community, in support of our social value commitment.\n, • Staff perks with Mears Rewards - discounts of up to 10% weekly groceries, holidays, eye test vouchers, Share save scheme, plus much more.\n, • Family friendly policies\n, • Company Van, Fuel Card, and Uniform\n\n All our roles require candidates to have the entitlement to work within the UK, Mears does not currently offer visa sponsorship. \n To drive a Mears vehicle, you must be aged over 21 have held your licence over 3 months and have less than 9 points. \n Candidates should be aware that all our roles are subject to relevant Background, Identity & Security checks before commencement of employment. \n Apply below or to discuss your application further; contact: Laura Bourne () \n If you need any help with your application process, we are here to support you. We will be accessible every step of the way. \n At Mears Group, we are committed to fostering a diverse and inclusive environment where everyone can thrive, we are a Disability Confident employer, valuing individuality and ensuring equal opportunities for all. \n We proudly support the Armed Forces Covenant and are honoured to have achieved the Gold Award in the Defence Employer Recognition Scheme (ERS) to coincide with this, we hold an Endorser Award for the Career Transition Partnership, recognising our commitment to veterans transitioning into civilian careers. \n In our continued effort to promote social mobility, we invite applicants to voluntarily share their background information during the application stages to help us better understand the diverse experiences of our candidates. This is to ensure we are committed to improving social mobility. We use the Social Mobility Index to assess and enhance opportunities for individuals from diverse backgrounds. These questions are optional and will not impact your ability to apply.

\n Manufacturing Engineer – Fans \n Location: Sunbury-on-Thames, Surrey \n \n About the Role We are seeking an experienced Manufacturing Engineer to join a busy engineering and manufacturing environment. \n \n Working across operations, supply chain and design engineering, you will provide manufacturing engineering expertise across both existing and new products. You will be responsible for developing and improving manufacturing processes, supporting new product introduction and driving Lean and Continuous Improvement initiatives. \n \n This is a hands-on engineering role offering the opportunity to make a direct impact on manufacturing efficiency, quality, cost and delivery. \n \n Key Responsibilities \n\n • Work closely with manufacturing cell leaders, Lean teams and design engineering to improve process efficiency.\n, • Develop, implement and maintain Standard Work and manufacturing documentation, including SOPs, routings and visual factory standards.\n, • Create and maintain manufacturing routings within an MRP/ERP system.\n, • Implement Lean manufacturing techniques such as one-piece flow, visual management and balanced assembly lines.\n, • Apply improvement methodologies including 5S, 7 Wastes, Standardised Work and Visual Management.\n, • Identify and implement manufacturing layout improvements, working closely with facilities and maintenance teams.\n, • Support manufacturing teams with the collection and analysis of production data, identifying key areas for improvement.\n, • Establish product cycle times and monitor actual performance against agreed standards.\n, • Identify opportunities to reduce manufacturing labour content, waste, rework and production lead times.\n, • Lead or support Continuous Improvement, process improvement and CAPEX projects associated with new products and processes.\n, • Work with engineering teams on product documentation changes, engineering changes and parts obsolescence.\n, • Provide day-to-day manufacturing engineering support to production, including concessions, non-conformances, engineering changes and material review activities.\n, • Develop and optimise cost-effective manufacturing processes for new product introductions.\n, • Lead and contribute to Process FMEA (PFMEA) development and implementation.\n, • Manage New Product Introduction (NPI) activities and support products throughout their manufacturing lifecycle.\n, • Support the introduction of new products into production and the transition from development into full manufacturing.\n, • Mentor and support manufacturing cell leaders in improving assembly and test methods.\n, • Work collaboratively with cross-functional teams to resolve technical and manufacturing issues.\n\n About You The successful candidate will have: \n\n • Proven experience in a Manufacturing Engineering role or similar position.\n, • Previous experience in New Product Introduction (NPI).\n, • Experience implementing Standard Work and structured manufacturing processes.\n, • A proven track record of implementing Lean Manufacturing within an industrial environment.\n, • Strong experience developing and maintaining process maps, PFMEAs and control plans.\n, • Strong knowledge of Lean manufacturing principles and Continuous Improvement methodologies.\n, • Experience using structured problem-solving techniques such as 5 Why, Fishbone/Ishikawa and 8D.\n, • Significant technical and problem-solving experience within an electro-mechanical manufacturing environment.\n, • Experience planning and managing complex, long-term engineering or improvement projects.\n, • Good IT skills, including Microsoft Word and Excel.\n, • Experience within aerospace, automotive or a closely related manufacturing environment would be highly advantageous.\n, • Knowledge and practical experience of ERP/MRP systems.\n, • A sound understanding of manufacturing process control techniques, including Gauge R&R, Design of Experiments (DOE) and Statistical Process Control (SPC).\n, • Strong analytical and problem-solving ability with excellent attention to detail.\n, • The ability to work effectively within a cross-functional/concurrent engineering environment.\n, • Strong communication and presentation skills, with the confidence to communicate at different levels of an organisation.\n, • A proactive, self-motivated approach with the ability to take ownership and work independently.\n, • Strong organisational and time-management skills, with the ability to work to demanding deadlines.\n, • Leadership qualities and the ability to influence and motivate others.\n, • A flexible approach and willingness to learn and develop.\n\n AI & Digital Skills You should be comfortable using AI and digital tools to improve productivity, decision-making, quality and cost efficiency. \n The successful candidate will be expected to identify appropriate opportunities for AI-assisted improvement while applying sound judgement when reviewing and validating AI-generated information. \n \n What You'll Bring This role would suit a Manufacturing Engineer who enjoys working at the interface between engineering and production, solving practical manufacturing problems and delivering measurable improvements. \n \n You will have the opportunity to influence processes from new product introduction through to ongoing production, while contributing to Lean transformation, cost reduction, quality improvement and manufacturing efficiency.

\n Principal Electromagnetic Engineer – EMAG / EMC \n Location: Sunbury-on-Thames, Surrey \n \n Shape the Next Generation of Electric Machines \n We’re looking for a Principal Electromagnetic Engineer to play a leading role in the development of advanced electricmotors, generators and electro-mechanical systems. \n \n This is a senior technical position for an engineer who combines deep electromagnetic design expertise with a hands-on approach to prototype development, testing and manufacturing. \n \n You’ll work from early concept and customer requirements through to design, validation and production release — solving complex engineering challenges along the way. \n \n The Role \n You’ll become a key technical authority for electromagnetic design across multiple development programmes, working closely with engineering, manufacturing and prototype teams. \n Your expertise will help shape high-performance electric machines for demanding, high-reliability applications. \n \n What You’ll Do \n\n • Lead electromagnetic design activities across product development programmes.\n, • Develop and optimise electric machine designs using ANSYS Motor-CAD and ANSYS Maxwell.\n, • Build analytical and simulation models to assess sizing, performance, losses, efficiency and NVH.\n, • Translate customer requirements and technical specifications into robust machine architectures and design concepts.\n, • Support technical proposals, work packages and development programmes from concept through to production.\n, • Consider electromagnetic, thermal, mechanical and system-level integration throughout the design process.\n, • Lead or make significant contributions to DFMEA, technical risk assessment and design robustness.\n, • Provide hands-on technical support during prototype builds and manufacturing activities.\n, • Work directly with prototype hardware, including windings, laminations and assembly processes.\n, • Investigate failures and lead structured root-cause analysis and corrective actions.\n, • Support electrical, mechanical and thermal validation and qualification testing.\n, • Prepare high-quality engineering reports, technical documentation, test plans and design review material.\n, • Produce and review 2D/3D CAD, drawings and BOMs where required.\n, • Support verification and validation activities and provide evidence for formal design reviews.\n, • Act as a technical reviewer, authority and mentor within the engineering team.\n, • Support concessions, deviations and non-conformance investigations where required.\n\n What You’ll Bring \n Essential: \n\n • Bachelor’s or Master’s degree in Electrical Engineering or a related discipline.\n, • Significant experience in electric machine electromagnetic design.\n, • Experience with machine technologies such as PMM, BLDC, BLAC, RFM or AFM.\n, • Strong understanding of:\n, • Electromagnetic theory\n, • Machine topology selection\n, • Magnetic materials\n, • Loss mechanisms\n, • EM/thermal coupling\n, • Mechanical and structural considerations\n, • Strong working knowledge of ANSYS Motor-CAD and ANSYS Maxwell.\n, • Experience acting as a technical authority, reviewer or approver.\n, • Strong experience with DFMEA and technical risk management.\n, • Experience in failure analysis and structured problem solving.\n, • Understanding of concessions, deviations and non-conformance management.\n, • A practical, hands-on approach and confidence working directly with prototype and manufacturing teams.\n, • Ability to turn complex technical requirements into practical machine-level designs.\n, • Excellent communication, documentation and stakeholder-management skills.\n, • Strong ownership and accountability for technical decisions.\n, • Ability to manage multiple projects and priorities.\n\n Desirable Experience \n Experience in one or more of the following would be highly advantageous: \n\n • Aerospace or defence\n, • Automotive electrification\n, • High-reliability engineering environments\n, • EMC / EMI\n, • Understanding how electric machine design affects system-level EMC performance.\n, • EMC coupling paths, shielding, grounding and filtering.\n, • Interaction between electric machines and inverter design.\n, • NVH and thermal systems.\n, • Advanced engineering materials.\n, • Design for manufacture and production processes.\n, • Digital engineering, scripting or AI-assisted engineering workflows.\n\n AI & Digital Engineering \n You’ll be encouraged to use AI and digital engineering tools to improve productivity, decision-making, engineering quality and cost efficiency. \n You should be able to identify valuable AI use cases while critically assessing and validating AI-generated outputs. \n \n Why This Role? \n This is more than a simulation role. \n You’ll have the opportunity to take ownership of complex electromagnetic engineering challenges and see your designs move from concept simulation prototype validation production. \n \n If you’re a senior electromagnetic engineer who enjoys both deep technical analysis and hands-on engineering, this is an opportunity to make a real impact on the future of electric machine technology. \n Ready to engineer what comes next? Apply now.

\n Electro-Mechanical Coil Winder \n Location: Sunbury-on-Thames, Surrey \n \n About the Role We are looking for an experienced and hands-on Electro-Mechanical Coil Winder to join our manufacturing team in Sunbury-on-Thames. \n \n You will be responsible for building, assembling, testing, inspecting and repairing electro-mechanical products and assemblies in accordance with technical drawings, manufacturing instructions and quality standards. \n This is a practical manufacturing role suited to someone with strong mechanical and electrical assembly skills, excellent attention to detail and a methodical approach to working. \n \n Key Responsibilities \n\n • Build and assemble electro-mechanical components and assemblies from technical drawings and manufacturing instructions.\n, • Carry out assembly work on fans, motors, heaters and other electro-mechanical products.\n, • Inspect and test completed assemblies to ensure they meet required quality and performance standards.\n, • Diagnose faults and carry out repairs or upgrades to electro-mechanical assemblies.\n, • Use a range of hand tools and precision measuring equipment, including torque drivers, micrometers and verniers.\n, • Carry out mechanical operations including drilling, tapping, reaming, countersinking, filing, lapping, buffing and lubrication.\n, • Connect cables and wiring in accordance with technical specifications.\n, • Complete functional testing and inspections, identifying and resolving issues where required.\n, • Maintain accurate manufacturing and quality documentation.\n, • Follow all manufacturing, quality and health & safety procedures.\n, • Maintain and care for equipment used within the assembly area.\n, • Participate in Continuous Improvement and 5S activities to improve product quality, efficiency and workplace standards.\n, • Work effectively with colleagues across the manufacturing operation to achieve production targets.\n, • Provide professional and helpful support to customers, suppliers and visitors when required.\n, • Support the wider manufacturing team with additional duties, including training colleagues and assisting other departments when required.\n, • Ensure all work is completed safely, accurately and within agreed production timescales.\n\n About You The successful candidate will ideally have: \n\n • Previous experience in electro-mechanical assembly, manufacturing or engineering.\n, • Experience working from technical drawings, manufacturing instructions or similar documentation.\n, • Good practical mechanical and electrical assembly skills.\n, • Experience using hand tools and precision measuring equipment.\n, • The ability to identify faults and troubleshoot electro-mechanical assemblies.\n, • Good attention to detail and a strong commitment to quality.\n, • A methodical and organised approach to work.\n, • The ability to work independently as well as part of a wider manufacturing team.\n, • Good communication skills and the confidence to communicate with colleagues, customers and visitors.\n, • A flexible approach and willingness to support different areas of the manufacturing operation.\n, • An understanding of 5S, Continuous Improvement or Lean manufacturing would be advantageous.\n\n What You'll Be Doing This is a hands-on manufacturing position where quality, accuracy and attention to detail are essential. You will work with a variety of electro-mechanical assemblies and will have the opportunity to develop your technical skills across assembly, testing, inspection, repair and manufacturing processes. \n \n If you are a practical engineer or assembler who enjoys working with your hands, solving problems and producing high-quality electro-mechanical products, we'd like to hear from you.

\n Test Operator \n Location: Sunbury-on-Thames, Surrey \n \n Put Products to the Test We’re looking for a Test Operator to join our engineering and manufacturing team, helping ensure electro-mechanical products perform exactly as they should. \n \n This is a hands-on role where you’ll set up test equipment, carry out functional and performance testing, troubleshoot issues and accurately record results. \n If you’re technically minded, methodical and enjoy getting to the bottom of problems, this could be the role for you. \n \n What You’ll Be Doing \n\n • Carry out functional, environmental and performance testing on electro-mechanical assemblies and systems.\n, • Set up and operate equipment including oscilloscopes, multimeters, signal generators and mechanical fixtures.\n, • Interpret technical drawings, electrical schematics and test procedures.\n, • Inspect finished products and identify faults, defects or performance issues.\n, • Troubleshoot test failures and support corrective actions.\n, • Accurately record test results, anomalies and corrective actions.\n, • Support engineering teams with prototype testing and product validation.\n, • Maintain and calibrate test equipment to ensure reliable and accurate results.\n, • Follow health, safety and quality procedures at all times.\n, • Contribute to Continuous Improvement and 5S activities within the testing environment.\n, • Help maintain a clean, safe and organised working area.\n, • Support colleagues through knowledge sharing and training where required.\n, • Be flexible to support other manufacturing areas when needed.\n\n What We’re Looking For You’ll ideally have: \n\n • 2+ years’ experience in a Test Technician, Test Operator or similar technical role.\n, • Experience using electrical and mechanical test equipment.\n, • The ability to read and understand technical drawings, schematics, CMMs and SOPs.\n, • A practical understanding of electro-mechanical systems.\n, • Good attention to detail and a methodical approach to problem solving.\n, • Good written and spoken English.\n, • Strong time-management and organisational skills.\n, • The ability to work effectively as part of a team.\n, • A professional, reliable and self-motivated attitude.\n, • The ability to remain calm and effective under pressure.\n, • Basic IT skills.\n\n Why Join? You’ll be working in a hands-on engineering environment where quality, precision and reliability matter. \n Every day will bring something different — from setting up test equipment and analysing results to troubleshooting problems and supporting new product development. \n If you’re someone who likes to understand how things work, find faults and make sure products perform to the highest standards, we want to hear from you. \n Apply now and put your skills to the test.

\n Manufacturing Engineer \n Location: Sunbury-on-Thames \n Make Manufacturing Better. Every Day. We’re looking for an experienced Manufacturing Engineer to drive process improvement, support new product introduction and help take manufacturing performance to the next level. \n \n You’ll work across operations, supply chain and design engineering, turning ideas into efficient, cost-effective and repeatable manufacturing processes. \n \n What You’ll Do \n\n • Drive Lean Manufacturing and Continuous Improvement across production.\n, • Develop and implement Standard Work, SOPs, routings and visual factory standards.\n, • Improve manufacturing flow using 5S, 7 Wastes, one-piece flow, Visual Management and balanced assembly lines.\n, • Analyse production data, identify bottlenecks and deliver measurable improvements.\n, • Establish and optimise product cycle times.\n, • Lead improvement projects and CAPEX linked to new processes and products.\n, • Support NPI, from initial introduction through to full production.\n, • Develop and optimise cost-effective manufacturing processes.\n, • Create and maintain PFMEAs, process maps and control plans.\n, • Provide hands-on engineering support to production, including NCRs, concessions, engineering changes and MRB activities.\n, • Support product transfers and ensure robust manufacturing processes throughout the product lifecycle.\n, • Work with engineering teams on documentation changes and parts obsolescence.\n, • Mentor production leaders and help develop better assembly and test methods.\n\n What You’ll Bring \n\n • 5+ years’ experience in aerospace, automotive or a closely related manufacturing environment.\n, • Proven Manufacturing Engineering experience within an electro-mechanical environment.\n, • Strong experience in NPI and Lean Manufacturing.\n, • Practical knowledge of Standard Work, PFMEA, control plans and process mapping.\n, • Experience with 5 Why, Fishbone/Ishikawa and 8D problem-solving techniques.\n, • Knowledge of ERP/MRP systems.\n, • Understanding of SPC, Gauge R&R and Design of Experiments (DOE).\n, • Strong project management and organisational skills.\n, • Excellent communication and stakeholder management skills.\n, • A proactive, hands-on approach with strong problem-solving ability.\n, • The confidence to lead improvement initiatives and influence others.\n, • Good Microsoft Office skills, particularly Word and Excel.\n\n The Opportunity This is a role for someone who wants to make a visible impact. \n \n You’ll have the opportunity to improve processes, reduce waste and cost, support exciting new product introductions and help shape how products are manufactured. \n \n You’ll also be encouraged to explore AI and digital tools that can improve productivity, decision-making, quality and cost — while applying good judgement to validate the results. \n \n If you’re a Manufacturing Engineer who enjoys solving real-world problems and turning improvements into results, we’d like to hear from you.

\n Electro-Mechanical Winder \n Location: Sunbury-on-Thames, Surrey \n Build It. Test It. Get It Right. We’re looking for a hands-on Electro-Mechanical Winder to join our manufacturing team. \n \n You’ll build, inspect, test, repair and upgrade electro-mechanical assemblies, working from technical drawings and manufacturing instructions. If you’re practical, precise and take pride in producing high-quality work, this could be a great opportunity. \n \n The Role \n\n • Build electro-mechanical assemblies from technical drawings, CMMs and SOPs.\n, • Work on motors, fans, heaters and other electro-mechanical products.\n, • Use hand tools and precision measuring equipment including torque drivers, micrometers and verniers.\n, • Carry out drilling, tapping, reaming, countersinking, filing, lapping, buffing and lubrication.\n, • Connect cables and wiring to technical specifications.\n, • Inspect and test completed assemblies, identifying and troubleshooting faults.\n, • Carry out repairs and upgrades where required.\n, • Complete manufacturing and quality documentation accurately.\n, • Maintain equipment and a clean, safe working environment.\n, • Follow all manufacturing, quality and safety procedures.\n, • Contribute to 5S and Continuous Improvement activities.\n, • Work closely with colleagues and support customers, suppliers and visitors when required.\n, • Support training and other manufacturing activities when needed.\n\n What We’re Looking For \n\n • Previous experience in electro-mechanical assembly, manufacturing or engineering is advantageous.\n, • Comfortable working from technical drawings and manufacturing instructions.\n, • Confident using hand tools and measuring equipment.\n, • Strong attention to detail and commitment to quality.\n, • Practical, reliable and methodical approach to work.\n, • Good communication and teamwork skills.\n, • Flexible attitude and willingness to learn.\n, • Able to work safely and meet production deadlines.\n\n Why Join? This is a genuinely hands-on manufacturing role where precision matters and your work makes a difference. \n \n You’ll work on a variety of electro-mechanical products, develop your technical skills and be part of a team focused on quality, efficiency and continuous improvement. \n \n Ready to get hands-on? Apply now.

Job Title: Business Analyst / Senior SAP IBP Consultant / SAP Supply Chain Consultant / SAP IBP Product Owner / Business Process Lead Planning / Global Planning Process Manager \n Salary: £80-90K \n Location: Woking \n Working Pattern: Hybrid \n Type: Permanent, full-time \n Sector: Technology / Supply Chain / Manufacturing / FMCG \n \n Are you a Senior Business Analyst with SAP, supply chain planning and manufacturing experience? \n \n Would you like to lead business-critical change across planning, manufacturing and quality processes? \n \n This is a confidential opportunity with a large enterprise organisation investing heavily in technology and application transformation. \n \n Apply today or contact us for a discreet conversation and the full client brief. \n \n About the Role \n \n We are representing a confidential client seeking a Senior Business Analyst to support a portfolio of technology change across supply chain, planning and manufacturing operati \n ons.You will work with business partners, technology teams, suppliers and delivery teams to turn complex business needs into clear requirements, functional specifications, test plans and practical process improvements. \n \n This Senior Business Analyst role will suit someone who enjoys combining hands-on business analysis with leadership, stakeholder management and process improvement. \n \n What You Will Be \n \n\n • Doing\n, • Lead requirements gathering, documentation and prioritisation for complex change initi\n, • atives.Support planning, manufacturing and quality management applications, including SAP-related process\n, • change.Act as workstream lead on large projects, or lead smaller projects and major business c\n, • hanges.Design and improve business processes, supporting UAT, training and ad\n, • option.Lead, coach and coordinate Business Analysts, functional consultants and matrix project teams.\n\n \n What You Will Need \n\n • 5-8 years’ Business Analysis experience across Waterfall and Agile environments.\n, • Strong knowledge of BA methods, tools, requirements management and process design.\n, • Experience with SAP ECC, SAP S/4HANA and SAP IBP, or similar ERP / planning applications.\n, • Supply chain, planning, S&OP, manufacturing, quality management or MES experience.\n, • Experience working with senior stakeholders, suppliers and technical delivery teams.\n, • A track record of delivering business-critical technology or application change.\n\n \n Nice to Have \n\n • Experience in FMCG, consumer goods, manufacturing or complex supply chain environments.\n, • Exposure to EDI, SAP Ariba, Order-to-Invoice, Exceedra or sales promotion tools.\n, • Experience with AI-enabled solutions or capabilities.\n, • Business Analysis qualification.\n\n \n Why Explore This Opportunity? \n \n\n • Senior ownership across business analysis, process improvement and technology change.\n, • Scope to influence supply chain technology direction.\n, • Work across planning, manufacturing and quality processes.\n, • Lead and coach other Business Analysts and functional specialists.\n, • Join a high-investment technology environment with a complex transformation ahead.\n\n \n Package \n \n\n • Salary: £80-90K\n, • Working pattern: Hybrid\n, • Benefits: Bonus up to 25%\n, • Location: Woking\n\n \n Apply today for a confidential discussion.

Exciting Electronics Engineer role!Redline has been retained by a leading process instrumentation manufacturer who are looking for an Electronics Engineer to join their R&D team based in Surrey.Due to significant growth, they are seeking an Electronics Engineer to be responsible for the test, design and development of analogue and digital circuit design across new and existing products, going into a variety of regulated industries. You will be involved with PCB design, prototyping, test and validation and software interface.The nature of the industry and products will require someone who is a British Citizen.Key skills and experience for Electronics Engineer based in Surrey:Proven experience within an electronics environmentIdeally within a regulated industry i.e. Defence, Aerospace, Medical, Automotive etc.Degree qualified in a related Electronics disciplineCircuit and PCB designElectronic testExcellent verbal and written communication skillsThis is an exciting opportunity to join a growing company who can offer the opportunity for career progression and personal development.TPBN1_UKTJ

Closing Date: 17/08/2026 Working Pattern: five days, alternate weekendsWhat's in it for you At Booker, along with being a great place to work and giving you an opportunity to get on in your career, we also offer the following fantastic package of benefits:A Booker colleague card with 10% off purchases at Booker and double discount events up to three times a year.After 3 months service, a Tesco colleague discount card with 10% increasing to 15% off most purchases at Tesco for a 4 day period after every four-weekly pay day, ie. thirteen times a year. In addition to 10% off at Tesco Cafe and 20% off all F&F purchases.10% off pay monthly & SIM only deals with Tesco Mobile for yourself, along with further great deals through-out the year.Up to 30% off car, pet and home insurance at Tesco bank. Terms and conditions apply.Free eye test when you spend £50 or more. You can also save 30% when you spend £50 or more on glasses, prescription sunglasses and contact lenses.50% off health checks at Tesco Pharmacy.Exclusive access to discounted RAC breakdown cover ratesAn exclusive deals and discounts website saving you money on everyday purchases including a cycle to work scheme.After 3 months service, you can join our annual Save As You Earn share scheme which allows you to buy Tesco shares in the future at a discount.Retirement savings plan (pension) - save up to 5% and Booker will match your contribution.Life Assurance - You are covered for death in service life cover of up to three times annual payHealth and Wellbeing support and resources including our 24/7, confidential Employee Assistance Programme and Virtual GP for you and your family.A great holiday packageAbout the role As a Skilled Butcher you will have a good product knowledge, cutting and preparation skills, and offer high standards of customer service. You will be able to prepare orders to customer's needs and have a good understanding of stock control process and procedures.Responsible for supporting the Butchery sales and profit by working closely with the Butchery Manager and the department team, working with your customers, ensuring that we continue to provide the highest standards in customer service and that we comply to health & safety and legal standards at all times. You must be customer driven, organised and be an excellent communicator, with experience within the butchery trade.You will be responsible for Working as part of a small team on the Butchery Department, you may also be responsible for running the department in the Butchery Manager's absence and will follow company standard ways of working and comply with legislative requirements in food safety and health and safety at all times.Working hoursfive days, alternate weekends - 38 hours a weekThe working hours/pattern for this role will be discussed and confirmed at interview. Please note that we are a 7-day operation and therefore offer a variety of flexible working patterns to fit personal circumstances and support work and family demands whilst meeting the needs of the business and our customers. In return, we can offer a competitive wage and benefits and personal pension plan.About The Company Booker is the UK's leading food & drink wholesaler. We are privileged to serve independent retailers, caterers and small businesses, from locations across the country. We operate over 190 cash and carry branches, 8 distribution centres, 5 Best Food Logistics sites, as well as 6 support centre locations across the UK.Diversity, Equity and Inclusion (DE&I) at Booker means that whoever you are and whatever your background, we always want you to feel represented and that you can be yourself at work. In short, were a place where Everyones Welcome.We know life looks a little different for each of us. Thats why at Booker and Best, we always welcome conversations about flexible working. Some people are at the start of their careers; some want the freedom to do the things they love. Others are going through life-changing moments like becoming a carer, nearing retirement, adapting to parenthood, or something else. So, talk to us throughout your application about how we may be able to support you.Were proud that Booker is a Disability Confident Committed Leader and were committed to providing a fully inclusive and accessible recruitment process.Please noteWe can only accept candidates over the age of 18 if the role requires working before 6:15 am or after 9:45 pm or involves working in areas such as the warehouse, beers, wines & spirits, and driving roles.On the occasions where we have high volumes of applicants, some roles may close earlier than the advertised end date in order for us to manage all of the applicants appropriately. We will only be able to offer individual feedback to those candidates who attend an interview.Booker Group is part of Tesco plc, however, is operated separately from the core Tesco business and as such the benefits offered will be different from those offered at TescoTPBN1_UKTJ

A company that specialise in electro-mechanical systems for the Automotive / EV industry is seeking to recruit a Systems Engineer to work on a contract based in Surrey that is initially scheduled for 6 months, Outside IR35.The RoleThis is an exciting opportunity to support the development and specification of next-generation products within a complex engineering environment.The successful candidate will work alongside senior engineering team members to apply structured systems engineering principles, supporting the delivery of safe, secure, and innovative solutions in line with industry standards, including ISO 26262 Functional Safety and ISO 21434 Cybersecurity.The role requires a strong understanding of systems engineering methodologies, with experience in defining, analysing, and refining end-to-end system architectures. You will contribute to the development of clear system requirements, support architectural design decisions, and provide technical justification for key engineering choices.You will use modelling and analysis techniques to represent system behaviour, assess interfaces, and support effective integration across hardware and software domains. The role will also involve contributing to verification planning, system-level problem solving, and ensuring that the delivered product aligns with the intended design.Candidates with experience using requirements management tools are highly desirable, as the role includes responsibility for specifying elements of the system and maintaining requirements traceability. As projects progress through later development stages, you will support design verification activities through the creation of test specifications and review of verification results.A strong background in cybersecurity principles and practical experience applying ISO 21434 is essential for this position.Essential Skills & ExperienceThe successful candidate will have: Proven experience working in a Systems Engineering role Practical experience applying Functional Safety principles (ISO 26262 or equivalent) Practical experience applying cybersecurity standards (ISO 21434 or equivalent) Experience in requirements definition, analysis, and management* Experience developing system architectures and conducting engineering trade-off studiesApplyFor more information on this contract please email your CVTPBN1_UKTJ

Software Manager Are you an experienced Software Manager who enjoys combining hands-on development with technical leadership? Do you have a background in embedded software, control systems and leading engineering teams within a highly regulated environment?We're working with an innovative engineering manufacturer that develops complex electronic systems used in safety-critical industrial applications. Due to continued growth, they're looking for a Software Manager to lead the software function, shape the technical roadmap, and oversee the successful delivery of software projects from concept through to deployment.The Role Reporting to the Engineering Manager, you'll lead a small team of Software Engineers while managing external development partners to deliver high-quality software solutions on time and to specification.This is a varied role where you'll remain technically involved while driving software strategy, supporting new product development, maintaining existing platforms, and ensuring all solutions meet stringent safety and regulatory standards.Key Responsibilities as a Software Manager: Lead the software team, providing technical direction, mentoring and performance development.Develop and maintain embedded software for complex electronic control systems.Define the long-term software architecture and technical roadmap.Establish coding standards, software development best practice and robust engineering processes.Oversee the full software development lifecycle, from requirements gathering through to deployment and commissioning.Work closely with Hardware, Product and Engineering teams to ensure seamless system integration.Develop intuitive human-machine interfaces (HMIs) and robust control software.Maintain and enhance existing software platforms while supporting future product development.Investigate and resolve software issues, ensuring safe and reliable solutions for customers.Support production, service and manufacturing teams with software-related issues.Manage project plans, resources, budgets and delivery milestones.Identify technical risks and implement effective mitigation strategies.Drive continuous improvement across software development processes and team capability.About You as a Software Manager: You'll be an experienced technical leader with a passion for delivering robust, high-quality software within an engineering or manufacturing environment.You'll ideally have:A degree in Computer Science, Electronic Engineering, Electrical Engineering or a related discipline.Proven experience leading software development teams and delivering complex technical projects.Strong embedded software development experience.Excellent knowledge of C, C and C#.Experience developing software for embedded control systems.A solid understanding of software architecture, system integration and HMI development.Experience working with Agile or Scrum methodologies.Strong requirements capture, documentation and test specification experience.Excellent communication and stakeholder management skills.The ability to balance strategic leadership with hands-on technical delivery.Experience working within safety-critical, industrial automation, electronics manufacturing, instrumentation, power electronics or other regulated engineering environments would be highly advantageous. Knowledge of digital electronics would also be beneficial.What's on Offer? This is a fantastic opportunity to join a market-leading engineering business developing advanced technology used across demanding industrial sectors.You'll have the opportunity to influence technical strategy, lead a talented software team, remain hands-on with development, and play a key role in delivering innovative products that make a real difference.If you're looking for a role where you can combine leadership, software engineering and technical innovation, we'd love to hear from you.TPBN1_UKTJ

Applications EngineerLocation: Near Woking, SurreyWorking Pattern: Primarily office-based, with UK and occasional international travelSalary: From £40,000, dependent on experienceHours: Monday to Friday, typically 9:00am to 5:15pm, with flexible start and finish timesBenefits for Senior Metrology EngineerCompetitive salaryCompany-wide commission scheme24 days annual leave plus bank holidaysWorkplace pension schemeFree on-site parkingOn-site gym and wellbeing activitiesUK and occasional international travelLong-term role within a specialist measurement technology businessIntroduction for Senior Metrology EngineerIndustrial Connected Talent is supporting a specialist measurement technology business in the search for an experienced Senior Metrology Engineer.This is a senior technical role focused on dimensional measurement, vision-based metrology systems and customer application support. You will act as a key technical resource for customers, sales teams and internal product development.Responsibilities for Senior Metrology EngineerAs Senior Metrology Engineer, you will provide technical expertise across measurement applications, system setup, calibration and product development. You will work with both hardware and software, helping customers achieve accurate and repeatable results.Provide expert support on dimensional measurement and vision-based metrologySet up, test and calibrate optical and vision measurement systemsAdvise customers on measurement methods, tolerances and accuracySupport demonstrations, training and technical problem-solvingWork with design teams to support new product developmentMentor less experienced engineers within the metrology teamTravel to customer sites in the UK and occasionally overseasRequirements for Senior Metrology EngineerThe ideal candidate will have at least five years experience within metrology, dimensional inspection or measurement applications. You should understand the principles behind measurement accuracy, tolerances and repeatability, rather than simply operating equipment.At least five years experience in metrology or dimensional inspectionStrong understanding of measurement principles, tolerances and accuracyExperience with optical, vision-based or non-contact measurement systemsAbility to interpret engineering drawings and advise on measurement methodsPractical experience setting up or calibrating measurement equipmentStrong customer-facing communication and technical problem-solving skillsWillingness to work primarily on-site near Woking and travel when requiredDesirable Experience for Senior Metrology EngineerExperience using MetLogix M3 softwareBackground with vision systems, optical comparators or CMM equipmentExperience in an Applications Engineer, Metrology Engineer or technical Service Engineer roleProduct development or design engineering support experienceTPBN1_UKTJ

An established, technology-driven engineering organisation operating in the advanced imaging and detection sector is seeking a highly capable FPGA Engineer with strong VHDL development experience to join their growing engineering team.You will play a key role in designing and developing high-speed FPGA-based systems, working across the full product lifecycle-from concept through to production. This is an exciting opportunity to work on cutting-edge embedded systems, signal processing, and high-speed digital design, collaborating with multidisciplinary teams in a dynamic environment.Key responsibilities for the FPGA Engineer role based in EghamDesign and develop FPGA firmware using VHDL for high-performance applicationsImplement high-speed digital signal processing systems using ADCs, DACs, and memory interfacesManage the full firmware development lifecycle (design, implementation, verification, and production release)Debug and troubleshoot hardware and firmware issues using lab equipment (oscilloscopes, logic analysers)Develop and execute verification & validation plansCollaborate with hardware, software, and production teams to ensure seamless system integrationProduce and maintain technical documentation, including specifications, test reports, and production documentationSupport manufacturing and production teams with technical expertiseContribute to continuous improvement and innovation in FPGA and embedded technologiesRequired Skills & Experience for the FPGA Engineer role in EghamDegree in Electrical & Electronic Engineering or related fieldMinimum 2+ years of FPGA/VHDL development experienceStrong knowledge of FPGA design (Xilinx, Lattice or similar toolchains)Experience with serial communication protocols (SPI, I2C, UART, RS232/485, CAN)Knowledge of high-speed interfaces (Ethernet, USB, TCP/IP, UDP, Aurora, etc.)Experience with hardware debugging and lab instrumentationUnderstanding of embedded systems and digital design principlesFamiliarity with schematic capture and simulation tools (e.G., Altium, pSPICE)Basic programming skills (e.G., Python)The position can be a mid or senior level FPGA Engineer to work on innovative, high-speed FPGA projectsAPPLY NOW! To apply for the FPGA Engineer role based in Egham, please send your CV to , or for more information contact Mike Belmar on 01582 878807.TPBN1_UKTJ

System Integration Engineercandidates require an SC clearance or must be willing to undergo clearanceStart: ASAPDuration: 6-12 monthsLocation: onsite in SurreyWe're looking for an AIT (Assembly, Integration & Test) Engineer to support the integration, testing and verification of complex aerospace systems. You'll work across the full engineering lifecycle, from integration and functional testing through to environmental and end-to-end system testing.Key Responsibilities- Support assembly, integration and functional testing of aerospace equipment and systems.- Develop and execute test procedures, analysing results to identify issues and improvements.- Diagnose and resolve technical faults during integration and test activities.- Produce and maintain accurate technical documentation and test records.- Collaborate with cross-functional engineering teams to ensure successful delivery.- Adhere to cleanroom and ESD procedures, maintaining full product traceability.Skills & Experience- Degree in Engineering or a STEM-related discipline.- Understanding of assembly, integration and test (AIT) principles.- Experience with hardware and software testing.- Knowledge of cleanroom and ESD processes.- Strong analytical, troubleshooting and documentation skills.- Familiarity with spacecraft systems or high-reliability engineering environments is advantageous.- Exposure to scripting or programming (Python, Shell, Java or C/C++) is beneficial.TPBN1_UKTJ

Facilities By ADF plc have an exciting opportunity for HGV Class C and E Waste Tanker Operative to join their team based in Longcross, Surrey. \n \n Location: Surrey, KT16 0EF \n Salary: £189 per day, Overtime available after 10 hours \n Job Type: Full Time, Permanent \n Hours of Work: 40 hour shift pattern \n \n About Us: \n \n Facilities by ADF plc provides serviced vehicle hire for television and film productions in the UK and Europe, specialising in on-location support for dramas and major features. The group includes Location One (Integrated end to end shoot support) and Autotrak Portable Roadways (temporary access equipment hire) and the role would be working across all three companies to ensure an aligned approach. \n \n HGV Class C and E Waste Tanker Operative - The Role: \n \n • To operate our vacuum tanker, removing waste from our trailers on production sites across the UK \n • You will be part of a dedicated team undertaking these duties \n • Working as part of a team and communicating with the relevant crew to ensure that all tasks are completed in a timely manner \n • Assist the Base Staff with the setting up of equipment on set \n • Demonstrate good awareness of Health & Safety protocols \n \n HGV Class C and E Waste Tanker Operative - Essential Requirements: \n \n • Have a full UK Driving License (or equivalent) with 6 or less points \n • Current DQC and Driver Digi-Card \n • Knowledge of Drivers hours and WTD hours \n • Adherence to Health and Safety guidance/rules \n • Demonstration of a “Can Do” attitude \n • Flexibility \n • Be able to work as part of a professional, dedicated team \n • Punctual \n • Excellent Communication Skills \n \n HGV Class C and E Waste Tanker Operative - Benefits: \n \n • 29 days holiday per annum (including Bank Holidays) increasing to max 33 with each year of service \n • Full PPE & Uniform \n • Access to Employee Assistance Program \n • Company Pension Scheme \n • Free Eye Test \n • Refer a Friend Scheme \n • Informal Recognition Rewards \n • Career progression (for the right candidate): Lead Driver, Driver Trainer \n \n To submit your CV for this HGV Class C and E Waste Tanker Operative opportunity click ‘Apply’ now!

Experienced Plumber / PipefitterSalary: £40,000£43,000 Location: South East England Type: Full Time, PermanentAbout Heat SyncHeat Sync is a detail-driven heating and air conditioning specialist trusted by some of the South Easts most discerning clients from newly built mansions on the Wentworth Estate to landmark listed buildings in Chelsea and Hyde Park. Our work is defined by precision, discretion, and a genuine commitment to doing things right the first time.Our Managing Director, David Foster, brings over 25 years of expertise in domestic and commercial HVAC, and that same standard runs through everything we do. Were a tight-knit team, and wed like to keep it that way which is why this appointment matters.The RoleNo two days are the same at Heat Sync and thats exactly how our people like it. As an experienced Plumber/Pipefitter, youll be working across some of the most impressive properties in the South East: grand new builds on gated estates, prestigious listed buildings, high-end commercial refurbishments, and everything in between.This isnt a job for someone who wants to cut corners. Our clients expect excellence, and so do we. If you take real pride in a clean installation, a well-run pressure test, and pipework that looks as good as it performs youll fit right in.Day to day, youll be:Installing plumbing and heating systems, pipework and bathrooms across residential and commercial sitesWorking with underfloor heating, hot and cold water distribution, and sanitary ware installationReading and interpreting technical drawings and specificationsCarrying out first and second fix plumbing to the highest standardCollaborating with our engineers and site teams on complex, multi-trade projectsRepresenting Heat Sync with the care and professionalism our clients expectWhat Were Looking ForWere after someone with solid, proven experience in plumbing and heating someone who has worked on varied projects and knows what a high standards looks like. Qualifications matter, but the quality of your work matters more.Essential:Proven hands-on experience in plumbing and heating across residential and/or commercial projectsFull UK driving licence clean preferredDesirable (but not essential):NVQ Level 2 in Plumbing (or working towards)CSCS cardThe technical ability gets you through the door. What keeps you here is everything else. Youll be on site in some exceptional properties often working directly around our clients so professionalism, reliability, and a quiet confidence in your craft are just as important as your pipe runs.You set your own bar high and it shows in your finished workYoure organised, dependable, and people know they can count on youYou communicate clearly with clients, colleagues, and site teamsYou solve problems calmly, without dramaYou take ownership if somethings not right, you fix itYoure proud of what you do and it showsWhat We OfferWe look after our people properly. In return for your skill, reliability, and commitment to our standard, heres what youll get:£40,000£43,000 per annum (dependent on experience)Optional company van benefit20 days holiday plus bank holidaysNEST pension scheme with employer contributionsVaried, rewarding work on premium South East projectsA team that takes pride in what it does and treats you accordinglyHow to ApplyIf this sounds like the kind of work youve been looking for, wed love to hear from you. Send a brief introduction and your CVTPBN1_UKTJ

Entity: Technology Job Family Group: IT&S Group Job Description: We are seeking a Senior Business Analyst who combines deep technical expertise with strong business analysis and business partner engagement skills. This role is ideal for someone who has a background in software development, database engineering, data analysis, or systems integration and is passionate about working directly with users to solve business problems. The successful candidate will act as the bridge between business teams and technical delivery teams, translating business needs into practical, scalable solutions while bringing hands-on technical insight to the design, analysis, validation, and delivery of digital products and services. This role requires the ability to independently analyse data, write queries, investigate system behaviour, validate technical designs, and support delivery teams with a detailed understanding of applications, integrations, APIs and databases. About bp Shipping Assurance: The Shipping Assurance function within BP Supply, Trading & Shipping (ST&S) is responsible for helping ensure that vessels, marine operations and associated marine entities meet BP's safety, risk management and operational standards before being approved to support BP business activities. The function operates as a key component of BP's marine assurance and licence-to-operate framework. Role Responsibilities: Business Analysis and User Engagement Lead business discovery activities to understand business objectives, user needs and operational challenges. Facilitate workshops and requirements gathering sessions with business and technical partners. Build strong relationships with users, product teams and technical delivery teams. Translate business needs into clear, structured and testable requirements. Facilitate requirements prioritisation, scope management and solution alignment. Identify assumptions, dependencies, risks and constraints early in the delivery process. Influence senior partners through evidence-based recommendations and structured decision-making. Technical Analysis & Solution Design Analyse existing applications, data flows, databases and system integrations. Collaborate with architects, engineers and product teams to design fit-for-purpose solutions. Support API and integration design discussions. Produce process maps, data models, workflow diagrams and solution documentation. Assess technical feasibility, dependencies, risks and implementation options. Act as a trusted advisor to both business and technical partners. Data & Database Analysis Perform sophisticated data analysis using SQL and other analytical tools. Investigate data quality issues and identify root causes of business problems. Validate data migrations, transformations and integrations. Create queries, reports and analytical outputs to support decision-making. Understand relational database design, data models and data governance principles. Work directly with development and data engineering teams to solve issues. Agile Delivery and Solution Support Partner with Product Managers, Architects and Engineers to shape and refine solutions. Support backlog management, prioritisation and sprint planning activities. Review technical solutions and challenge assumptions where required. Support testing strategy, UAT planning and defect triage. Facilitate solution demonstrations and customer reviews. Support business readiness, deployment planning and adoption activities. Testing and Validation Define business test scenarios and acceptance criteria. Support User Acceptance Testing (UAT) activities. Validate delivered solutions against business requirements and intended outcomes. Support defect management and resolution activities. Data and Insight Use business and operational data to support analysis and decision-making. Define and monitor key performance indicators. Identify trends, opportunities and areas for improvement through data analysis. Present findings in clear and actionable formats for interested parties. Continuous Improvement & Innovation Find opportunities for automation and process optimisation. Leverage technical knowledge to simplify workflows and reduce manual effort. Support adoption of AI, analytics and digital technologies. Promote best practices in business analysis, requirements management and solution delivery. Essential Experience and Qualifications: Business Analysis Significant experience working as a Business Analyst or Technical Business Analyst in complex technology environments. Strong requirements elicitation, documentation and business partner management skills. Experience working within Agile delivery frameworks. Strong workshop facilitation and communication capabilities. Ability to influence business partners at all levels of an organisation. Technical Capability Hands-on experience with SQL and relational databases. Practical coding or scripting experience (e.g., Python, JavaScript, C# or similar). Experience analysing APIs, integrations and system interfaces. Understanding of software development lifecycle and engineering practices. Experience working with Azure DevOps, Jira or equivalent delivery tools. Ability to solve technical issues through data and system analysis. Analytical Skills Strong problem-solving and root-cause analysis abilities. Ability to work with large datasets and draw meaningful business insights. Experience producing process documentation, data models and solution diagrams. Solid attention to detail combined with the ability to see the wider business context. Desirable Experience: Experience working within digital product or platform delivery teams. Experience supporting business transformation, organisational change or operational improvement initiatives. Experience using data analysis and reporting tools, such as Power BI. Knowledge of enterprise architecture, integration and system delivery principles. Professional Business Analysis qualification (e.g. BCS, IIBA, ISEB or equivalent). Prior experience in the shipping or energy industry would be highly beneficial. Why Join Us? At BP, we support our people to grow in a diverse and exciting environment. We believe that our team is strengthened by diversity. There are many aspects of our employees’ lives that are significant, so we offer benefits to enable your work to fit with your life. These benefits can include flexible working options, a generous paid parental leave policy, excellent retirement benefits, among others. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Reinvent your career as you help our business meet the challenges of the future. Apply now! Please note that roles based out of SJS or Sunbury will move to Timber Square, Southwark, from Q4 2027 Travel Requirement Up to 10% travel should be expected with this role Relocation Assistance: This role is not eligible for relocation Remote Type: This position is not available for remote working Skills: Commercial Acumen, Communication, Data Analysis, Data cleansing and transformation, Data domain knowledge, Data Integration, Data Management, Data Manipulation, Data Sourcing, Data strategy and governance, Data Structures and Algorithms (Inactive), Data visualization and interpretation, Digital Security, Extract, transform and load, Group Problem Solving . Future Location Notice: This role will start in Sunbury, London. bp has announced a planned office move to Timber Square, London, with all positions currently advertised in Sunbury, including this one, expected to relocate around Q4 2027-Q1 2028. This presents an exciting opportunity for all employees and leaders to come together in one London location. The specific date of the move will be confirmed closer to the time. Legal Disclaimer: We are an equal opportunity employer. We do not discriminate on the basis of protected characteristics like race, religion, color, sex, national origin, sexual orientation, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please _. If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Data Architect Based at client locations, working remotely, or based in our Godalming or Milton Keynes offices. Salary up to £80,000, plus excellent company benefits. About Us Triad Group Plc is an award-winning digital, data, and solutions consultancy with over 35 years' experience primarily serving the UK public sector and central government. We deliver high-quality solutions that make a real difference to users, citizens and consumers. At Triad, collaboration thrives, knowledge is shared, and every voice matters. Our close-knit, supportive culture ensures you're valued from day one. Whether working with cutting-edge tech or shaping strategy for national-scale projects, you'll be trusted, challenged, and empowered to grow. We nurture learning through communities of practice and encourage creativity, autonomy, and innovation. If you're passionate about solving meaningful problems with smart and passionate people, Triad could be the place for you. Glassdoor score of 4.7 96% of our staff would recommend Triad to a friend 100% CEO approval See for yourself some of the work that makes us all so proud: Helping law enforcement with secure intelligence systems that keep the UK safe Supporting the UK's national meteorological service in leveraging supercomputers for next-level weather forecasting Assisting the British government department that is responsible for the safety of consumer products, with systems to track unsafe products Powering systems that help the government monitor and reduce greenhouse gas emissions from commercial transport Role Summary As a Data Architect, you will play a pivotal role in shaping the data strategy and architecture of the organisation. You'll work across various business domains, providing expert guidance to ensure data solutions align with enterprise standards and support strategic goals. This role involves close collaboration with technical architects, agile teams, and stakeholders to deliver robust, scalable, and compliant data architectures. Key Responsibilities: Collaborate with chief data architects to interpret organisational data needs and translate them into practical solutions. Provide oversight and guidance to data architects in the design and production of data artefacts. Design and maintain logical and physical data models, metadata systems, and data dictionaries. Ensure adherence to organisational data architecture standards across teams. Support agile delivery teams using Scrum methodology, contributing to iterative and collaborative development. Partner with technical architects to align system architecture with data architecture best practices. Foster knowledge sharing and maintain high standards within the data architecture community. Skills and Experience: Proven experience working across diverse business domains in a data architecture capacity. Strong 'can-do' attitude with a proactive and solution-oriented mindset. Solid experience with agile delivery practices, particularly Scrum. Ability to design data models and metadata systems that support business objectives. Competence in developing and managing data dictionaries. Experience providing technical oversight and ensuring compliance with architectural standards. Collaborative approach to working with both data and technical architecture teams. Nice to have Experience working in the UK Public Sector, with familiarity in applying the Service Manual and Service Standard. Active contributor to data communities of practice or professional networks. Qualifications & Certifications Bachelor's degree in Computer Science, Engineering, or a related field, or equivalent professional experience. Triad's Commitment to You As a growing and ambitious company, Triad prioritises your development and well-being: Continuous Training & Development: Access to top-rated Udemy Business courses. Work Environment: Collaborative, creative, and free from discrimination. Benefits: 25 days of annual leave, plus bank holidays. Matched pension contributions (5%). Private healthcare with Bupa Gym membership support or Lakeshore Fitness access. Perkbox membership. Cycle-to-work scheme. What Our Colleagues Have to Say Please see for yourself on Glass Door and our 'Day in the Life' videos at the bottom of our Careers Page. Our Selection Process After applying for the role, our in-house talent team will contact you to discuss Triad and the position. If shortlisted, you will be invited for: A Technical online test - circa 30 minutes A Technical interview session with our senior team members An interview with our CTO, including a career review and cultural fit assessment. We aim to complete interviews and progress candidates to offer stage within 2-3 weeks of the initial conversation. Other information If this role is of interest to you or you would like further information, please contact Ben Fowler and submit your application now! Triad is an equal opportunities employer and welcomes applications from all suitably qualified people regardless of sex, race, disability, age, sexual orientation, gender reassignment, religion, or belief. We are proud that our recruitment process has been recognised as inclusive and accessible to disabled people who meet the minimum criteria for any role. We are a signatory on the Tech Talent Charter that aims to bring industries and organisations together to drive greater inclusion and diversity in technology roles, in addition, as a Disability Confident Leader. TPBN1_UKTJ

Test Operator Location: Sunbury-on-Thames, Surrey Put Products to the Test We’re looking for a Test Operator to join our engineering and manufacturing team, helping ensure electro-mechanical products perform exactly as they should.

Hydraulic Project Engineer Egham-based | Hands-on engineering | Customer-site commissioning | Varied, high-value projects We’re looking for a practical, confident Hydraulic Project Engineer to take ownership of varied customer projects from build and test through to installation, commission

As an Electrician, you will be: Electrical test and inspection Reactive repairs and fault finding Full domestic electrical rewiring Electrical installation to kitchens and bathrooms Electrical installation of domestic heating system I’d love to speak to Electrician who has: A minimum of 2 ye

Do you want to play a key role in delivering world-class quality standards within the automotive industry? Benefits include: £16.00 per hour Weekend overtime available during peak periods starting from 25%+ 28 days holiday inclusive of Bank Holidays Employer pension contribution Training and development opportunities Permanent position with opportunities for progression We are seeking a Operations Supervisor to join our dedicated Quality Management team at G&P. This role supports a prestigious British high-performance automotive manufacturer and is based on-site in Woking. Reporting to the Plant Manager, you will lead a team of 5-10 Inspectors while supporting quality activities across the site. This is a hands-on role, with a strong focus on writing and maintaining Work Instructions/SOPs/Test Plans, alongside driving quality, compliance, and continuous improvement. Working hours: Monday - Friday: 06:00am - 14:00pm Flexibility may occasionally be required to support overtime at the end of shifts. Responsibilities include but are not limited to: Writing and maintaining Work Instructions, SOPs, and Test Plans. Leading and supporting a team of 5-10 Quality Inspectors. Conducting Level Zero investigations and root cause analysis. Planning and coordinating inspection activities. Carrying out layered audits and process conformance checks. Driving corrective actions and continuous improvement activities. Ensuring teams have the correct tools, PPE, and documentation. Supporting hands-on inspection activities where required. The ideal Operations Supervisor will have: Supervisory or team leadership experience within quality, manufacturing, or automotive environments. Experience writing Work Instructions, SOPs, Test Plans, or similar documentation. Experience investigating quality issues and implementing corrective actions. Experience managing teams in a fast-paced operational environment. Knowledge of layered audits and process compliance. Strong communication and problem-solving skills. Good Microsoft Office skills. Excellent communication skills Nice to have, but not essential: Quality inspection experience. SAP knowledge. Relevant quality or manufacturing qualifications. This is a permanent position with opportunities for progression. Please note, candidates must have the independent right to work in the UK; sponsorship is not available. G&P is a world-leading quality management services provider, supporting manufacturers in the automotive, defence, aerospace and industrial sectors, and their associated supply chains, to transform quality and efficiency levels. With over 30 years of experience, we provide tailored solutions through senior management support and expert personnel from our dedicated talent division. Through our award-winning engineering, technical, inspection and talent services, we help businesses minimise risk, maximise performance and achieve operational excellence. Operating from strategic hubs in six countries, we continue to grow across new sectors, always focused on eliminating disruptions and supporting our clients drive to zero defects. G&P is an equal opportunities employer and do not discriminate on the grounds of gender, sexual orientation, marital or civil partner status, pregnancy or maternity, gender reassignment, race, colour, nationality, ethnic or national origin, religion or belief, disability or age. TPBN1_UKTJ

SENIOR REMEDIALS ELECTRICIAN Full Time, Hours of Work - 45 COMPANY OVERVIEW Our client is one of the UK's leading providers of electrical safety services, specifically inspection and testing of fixed installations. Due to continued growth, they are now looking for a Senior Remedial Electrician in the Guildford Area. COMPANY USP'S Collectively 120 years management experience in advising on Safe Places at work, Safe Systems at work & Safe People at work' Industry Authority - authors of practical guidance to assist Duty Holders on meeting the demands of EaWR1989 Technological Pioneers - Development of on-site & on-line technology to enable immediate client access & update of records, regardless of location 93% client retention Blue Chip Client base - Industrial, Manufacturing, Pharmaceutical, Healthcare, Aerospace, Food & Drink, Sports & Leisure, Education. No High St retail or domestic JOB PURPOSE • Due to several large projects wins they are looking to expand the business and they are now looking for a Remedial Electrician to join their expanding team, • You will have the ability to work as part of a team to carry out Electrical Remedial Works for a range of clients., • You should possess a good working knowledge of current electrical legislation, regulations and standards and have a proven track record of working in 24-hour operational environments., • The role requires a person with excellent communication and interpersonal skills. Good IT skills would be advantageous but not essential as training will be provided to produce legible, accurate and concise reports. KEY RESPONSIBILITIES • Extensive knowledge of single and three phase fault finding and 1st time fixes., • Good sound electrical knowledge, for testing and installation works, • To carry out electrical repairs / minor works on variety types of LV installations, • To assess and order parts and equipment necessary for individual tasks, • To liaise with the Remedials/Operations Supervisor for planned and routine maintenance programme and reporting procedures, • To maintain records of all work, and that required paperwork is completed and sent in within the defined timescales QUALIFICATIONS/EXPERIENCE • Electrical Installation (NVQ Level 3 / 236), • Commercial/Industrial Experience, • C&G Qualifications, • AM2,IPAF,PASMA (desirable), • 18th Edition, • Test and Inspection 2391 (desirable), • Full UK driving licence SALARY & BENEFITS • Our client are offering a salary of up to £49,000 + Overtime (£55k + OTE), • Door to Door Travel, • 30 days Holiday including Bank holidays, • 45 hours a week., • A company van and fuel card is supplied., • Enrolled on the pension scheme from day one., • Following successful completion of the 6 month probationary period the person will be invited to join the company health scheme., • Sickness and absence: Paid from day one SSP JBRP1_UKTJ

Trainee Surveyor (No Experience Needed) United Kingdom From £27,282 a year - Full-time Be at the heart of building projects across the world. As a full-time soldier, entry-level Surveyor in the British Army, youll: • Help on building projects such as new bases, runways and more, • Use the latest technology to map out the construction sites and create designs, • Get first-class training in technical drawing, surveying, IT and more, • Work all over the world on projects from combat to disaster relief, • Study civil and site engineering and qualify as a Surveyor (Level 3 Diploma in Engineering Survey) To qualify, you must be between 16 years 6 months and 35 years 6 months and pass a basic fitness test. Set yourself up for life. From the start of your training, youll earn £27,282 a year which will go up as you progress in your career. Youll also receive 30 days annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. From your very first day of training with us, youll be gaining transferrable skills skills that could set you up for life. You dont need to know how to do the job before you get here, because well give you all the training you need. Youll even get to travel the world, taking part in the Armys adventurous training, and spending dedicated time playing the sports you love. Get skills, get qualified, get confident. You Belong Here. JBRP1_UKTJ

Bricklayer (No Experience Needed) United Kingdom From £27,282 a year-Full-time Build bridges, buildings, runways and more across the world. As a full-time soldier, entry-level Bricklayer in the British Army, youll: • Become a qualified bricklayer and concreter ready to work on infrastructure projects, • Learn general construction, scaffolding, concreting, block laying and task planning, • Learn to work under tough conditions across the world, • Study for qualifications including a NVQ Level 2 and 3 in Bricklaying and Concreting (Military Engineering) To qualify, you must: • Be between 16 years 6 months and 35 years 6 months, • Have a GCSE Grade A-C/9-5 or Scottish National 5 in Maths, English Language and one other subject, • Be able to pass a basic fitness test. Set yourself up for life. From the start of your training, youll earn £27,282 a year which will go up as you progress in your career. From your first day of training, youll be gaining transferrable skills skills that could set you up for life. You dont need to know how to do the job before you get here, because well give you all the training you need. Step 1 is your initial military training teaching you how to be a soldier which will be basic military training if youre a Junior Soldier and adult basic training if youre a Regular Soldier. Step 2 will be 12 weeks at the Royal School of Military Engineering where youll learn military engineering skills including demolition and bridge building. Step 3 will be 33 weeks of technical training at the Royal School of Engineering learning about brickwork, scaffolding and concreting. Youll also receive 30 days annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. Youll even get to travel the world, taking part in the Armys adventurous training, and spending dedicated time playing the sports you love. Get skills, get qualified, get confident. You Belong Here. JBRP1_UKTJ

Key Responsibilities \ Assist in designing, developing, and maintaining backend services and APIs Write clean, efficient, and well -documented code Work with databases to store, retrieve, and manage application data Collaborate with frontend developers, QA, and product teams Debug, test, an

About Us: MyFirst is one of the fastest-growing companies in the UK and a leading car insurance brand for young drivers. With big expansion plans ahead, this is a unique opportunity to join at a pivotal stage of our journey! Due to the location of our office being on a rural farm location you do need to be a car driver to reach our HQ. We’re looking for a Digital Marketing Specialist to join our founding marketing team. This is a hands-on role for someone who thrives on execution, optimisation, and ownership of the entire customer journey…from marketing campaign through to a completed sale. What You’ll Do • Paid Media Ownership: Run and optimise campaigns across Google Ads, Meta Ads, TikTok Ads, and other emerging channels., • SEO & AI Search: Build organic visibility and prepare for the rise of AI-driven search., • Click-Through & Conversion Optimisation: Improve CTRs, landing page performance, and funnel conversion rates., • Full-Funnel Ownership: Manage the journey end-to-end, from campaign to sale, ensuring accurate tracking and attribution., • Hands-On Execution: This is a doer’s role, you’ll set up, manage, and optimise campaigns yourself., • Data-Driven Growth: Analyse performance, test new ideas, and scale what works., • Future Team Growth: As MyFirst expands, take the opportunity to build and lead your own performance marketing team, shaping its direction and strategy team, shaping its direction and strategy. What We’re Looking For Demonstrated experience in multi-channel performance marketing, including: • Google & YouTube Ads (Essential), • Microsoft Advertising (Essential), • Social Campaigns – Meta, TikTok (Preferred), • Understanding of SEO fundamentals and enthusiasm for AI search evolution., • Background in CRO and improving ROI across funnels., • Analytical mindset with strong reporting skills., • A self-starter who thrives on execution., • Ambitious, entrepreneurial, and eager to grow with a high-growth startup. Why Join Us? • Salary £35,000 – £50,000, with a bonus structure available after a few months., • Be part of the founding marketing team at one of the UK’s most exciting insurance brands., • Clear career growth potential as the business scales., • Work in a fast-moving environment where your output has direct impact., • Work with an energetic team in a modern office with a great vibe - custom built gym onsite for all staff to use

What you will be doing (role duties and responsibilities) The Product Assurance (PA) Engineer will be responsible for reducing technical risk on our space programme by ensuring that materials, parts, assemblies, software and processes are fit for purpose over the lifetime of the mission. They will act as an independent technical reviewer, providing support to all engineering activities - verifying compliance to the processes outlined in the engineering management plan. Activities include: • Define (in conjunction with the Engineering Manager) product assurance and quality requirements for the programme., • Translate the requirements into a specific, pragmatic approach for the programme., • Monitor the implementation of this approach during the design, manufacturing, integration, test and trials phases of the programme., • Audit the quality management approach of key suppliers., • Support the component & material procurement / selection process against the space environment requirements., • Support the identification of the qualification requirements and the qualification plan authoring for the hardware design., • Chair non-conformance investigations., • Ensure that technical analyses are reviewed for engineering quality., • Provide support to test campaigns., • Report on activities to the project manager and engineering manager - in support of monitoring engineering performance metrics., • Monitor ESA alerts for relevant issues., • Ensure that key engineering reviews (e.g. manufacturing readiness reviews, test review boards) are effective., • Perform key inspections of components, assemblies and facilities., • Delegate to/mentor engineers in PA/QA tasks where required. Provide training to staff inexperienced in working within the Space domain. What we are looking for (skills and experience) We are looking for ambitious, high-calibre people with the following characteristics: Essential: • Product assurance experience to ECSS and/or NASA standards., • Experience in production and test of flight electronics payloads and software., • Good communication skills at all levels. Desirable: • Demonstrated experience in tailoring institutional Space standards for commercial programmes., • Quality inspection certification (ESA/other)., • Experience in safety management. If you are interested, please apply or contact Lewis Snell via Reasonable Adjustments: Respect and equality are core values to us. We are proud of the diverse and inclusive community we have built, and we welcome applications from people of all backgrounds and perspectives. Our success is driven by our people, united by the spirit of partnership to deliver the best resourcing solutions for our clients. If you need any help or adjustments during the recruitment process for any reason, please let us know when you apply or talk to the recruiters directly so we can support you. JBRP1_UKTJ

Plasterer The Army United Kingdom £27,282 a year (after training) Work on building projects around the world. As a full-time soldier, entry-level Plasterer in the British Army, youll: • Add finishing touches to buildings including headquarters, hospitals and military bases, • Master trades including plaster boarding, painting and tiling, • Become an expert in skills like glazing and scaffolding, • Carry out work on a variety of military and civilian projects, • Study for qualifications including a NVQ Level 2 and 3 in Building and Structural Finishing (Military Engineering) To qualify, you must: • Be between 16 years 6 months and 35 years 6 months, • Have a GCSE Grade A-C/9-5 or Scottish National 5 in Maths, English Language and one other subject, • Be able to pass a basic fitness test. Set yourself up for life. From the start of your training, youll earn £27,282 a year which will go up as you progress in your career. From your first day of training, youll be gaining transferrable skills skills that could set you up for life. You dont need to know how to do the job before you get here, because well give you all the training you need. Step 1is your initial military training teaching you how to be a soldier which will be basic military training if youre a Junior Soldier and adult basic training if youre a Regular Soldier. Step 2 will be 12 weeks at the Royal School of Military Engineering where youll learn military engineering skills including demolition and bridge building. Step 3 will be 24 weeks of technical training at the Royal School of Engineering learning about dry lining, painting, wall and floor tiling, planning and site safety. Youll also receive 30 days annual leave every year (plus bank holidays and extra leave after operations), free medical and dental care, cheaper living costs, and free gym and sports facilities. And unless you're away on operations or training exercises, you'll normally work 8.30am to 5pm, Monday to Friday. Youll even get to travel the world, taking part in the Armys adventurous training, and spending dedicated time playing the sports you love. Get skills, get qualified, get confident. You Belong Here. JBRP1_UKTJ

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. £365+ Avg Monthly Pay 5-10 Hours/Week 100% Remote This opportunity is open to users in the UK • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. £365+ Avg Monthly Pay 5-10 Hours/Week 100% Remote This opportunity is open to users in the UK • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. £365+ Avg Monthly Pay 5-10 Hours/Week 100% Remote This opportunity is open to users in the UK • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. £365+ Avg Monthly Pay 5-10 Hours/Week 100% Remote This opportunity is open to users in the UK • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. £365+ Avg Monthly Pay 5-10 Hours/Week 100% Remote This opportunity is open to users in the UK • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. £365+ Avg Monthly Pay 5-10 Hours/Week 100% Remote This opportunity is open to users in the UK • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. £365+ Avg Monthly Pay 5-10 Hours/Week 100% Remote This opportunity is open to users in the UK • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. £365+ Avg Monthly Pay 5-10 Hours/Week 100% Remote This opportunity is open to users in the UK • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. £365+ Avg Monthly Pay 5-10 Hours/Week 100% Remote This opportunity is open to users in the UK • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. £365+ Avg Monthly Pay 5-10 Hours/Week 100% Remote This opportunity is open to users in the UK • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

We're looking for passionate gamers to join our elite team of mobile game testers. Get paid to play and test the latest games before they launch. £365+ Avg Monthly Pay 5-10 Hours/Week 100% Remote This opportunity is open to users in the UK • Must be 18 years or older, • Own a smartphone or tablet, • Able to commit 5-10 hours per week, • Strong attention to detail, • Reliable internet connection

Read and strictly follow the In-Home Usage Test Daily Schedule provided with each product testing project (may include tasks such as unpacking, reading instructions, journal entries, online or mobile feedback, usage of product for a c.

Designs and maintains automated tests, collaborates with developers, and ensures software quality.