Trabajos entry level production en Westbury, New YorkCrear alertas

Manheim Mobile Vehicle Condition Inspector Candidates may be hired at one of the following levels depending on experience, qualifications, and business need: Mobile Inspector - Level 1 Hourly Pay Range: $18.17 - $22.69 - $27.21 per hour Mobile Inspector - Level 2 Hourly Pay Range: $19.90 - $24.86 - $29.81 per hour Mobile Inspector - Senior Level Hourly Pay Range: $21.83 - $27.31 - $32.79 per hour Additional Compensation: • Monthly performance incentive based on inspection volume. Inspectors who achieve target production levels can earn approximately $750 per month, while top performers can earn $1,000+ per month., • Guaranteed incentive during the first three full months, • Month of Hire: Prorated guarantee up to $750, • First Full Month: Guaranteed $750, • Second Full Month: Guaranteed $500, • Third Full Month: Guaranteed $500, • Reimbursement provided for business use of a personal vehicle We are currently accepting applicants at all levels. Please see the minimum requirements for each level of the role below. Job Description (Applies to All Levels) The Mobile Inspector functions as a key member of the Manheim Mobile Inspections team, responsible for conducting on-site vehicle condition inspections for dealer clients within an assigned territory. This role provides accurate, detailed, and timely documentation of vehicle condition in accordance with Manheim inspection standards, supporting client trust, marketplace transparency, and inventory flow. Mobile Inspectors build strong relationships with dealer clients by delivering consistent, high-quality inspections, acting as brand ambassadors for Cox Automotive, and actively engaging dealers to grow participation in Manheim's mobile inspection services. This role requires the ability to work with minimal supervision while demonstrating increasing independence, sound judgment, and problem-solving skills. Primary Responsibilities & Essential Functions Vehicle Inspection & Documentation Conduct thorough vehicle inspections in accordance with Manheim inspection standards. Locate, start, move, inspect, and return vehicles safely on dealer client lots. Verify vehicle identification, VINs, mileage, sub-series, and options; ensure accurate system entry. Inspect and document vehicle exterior condition, including tires, frame, glass, panels, and mechanical components. Inspect and document interior condition, including seating, dashboard, and installed options. Perform basic mechanical checks across powertrain, drivetrain, and electrical components. Identify and document damage, missing components, or inoperable features. Client Engagement & Territory Management Build trust with dealer clients through consistent quality, professionalism, and responsiveness. Educate clients on the value of Manheim Marketplace and mobile inspection services. Proactively engage with dealers to increase inspection volume and maintain active participation. Leverage data, insights, and partner input to maximize inspection efficiency and territory productivity. Adapt to changes in daily appointments and schedules to ensure effective dealer coverage. Reporting, Tools & Collaboration Prepare and submit daily activity and production reports. Utilize Salesforce.com for reporting, lead management, and customer performance tracking. Collaborate closely with Wholesale Specialists, peers, and other Manheim teams to support client success. Work effectively within a continuous improvement and Lean environment, contributing to process enhancement. Safety, Compliance & Standards Maintain production expectations as established by leadership. Demonstrate a visible commitment to safety by following all safety and health procedures. Participate actively in Safety Excellence initiatives. Comply with Manheim inspection standards, including the NAAA Frame/Structure Damage Policy. Perform other duties as assigned. Role-Specific Requirements Mobile Inspector - Level 1 Summary Entry-level role responsible for conducting vehicle inspections under established processes while learning Manheim inspection standards, tools, and client engagement practices. Minimum Qualifications High School Diploma or GED required Minimal automotive knowledge preferred (body and mechanical) 0-1 years of automotive-related experience preferred Valid driver's license with a safe driving record required Ability to meet physical and mental demands of the role within required timeframes Key Responsibilities Conduct basic vehicle inspections with accuracy and attention to detail Safely move and handle vehicles on dealer lots Accurately document vehicle condition and data in inspection systems Develop working knowledge of inspection standards and client expectations Mobile Inspector - Level 2 Summary Intermediate role responsible for independently managing assigned inspection activity, delivering high-quality inspections, and supporting growth within the assigned territory. Minimum Qualifications High School Diploma or GED plus 3+ years of experience in a related field. The right candidate could also have a different combination, such as any level degree/certification beyond a HS diploma/GED; or 5 years' experience in a related field. 1-2 years of automotive-related experience preferred Valid driver's license with a safe driving record required Ability to meet physical and mental demands of the role within required timeframes Key Responsibilities Independently conduct detailed and complex vehicle inspections Manage daily inspection schedules efficiently across dealer locations Build strong working relationships with dealer clients Utilize data and insights to expand inspection volume and efficiency Support continuous improvement initiatives and team collaboration Mobile Inspector - Senior Level Summary Senior role responsible for advanced vehicle inspections, mentoring peers, and serving as a trusted inspection professional within the assigned territory. Minimum Qualifications High School Diploma/GED plus 5 years' experience in a related field. The right candidate could also have a different combination, such as any level degree/certification beyond a HS diploma/GED and 3 years' experience; or 7 years' experience in related field. Previous vehicle inspection experience required Strong automotive knowledge (body and mechanical) required 2-3 years of automotive-related experience strongly preferred 1 year of service with Manheim Inspections recommended Valid driver's license with a safe driving record required Ability to meet physical and mental demands of the role within required timeframes Key Responsibilities Perform advanced and high-complexity vehicle inspections Serve as a subject matter resource for inspection standards and best practices Support onboarding and development of less experienced Mobile Inspectors Maintain strong dealer relationships and inspection quality standards Model safety, professionalism, and operational excellence USD 19.90 - 29.81 per hour Compensation: Hourly pay rate is in the range of $19.90 - $29.81/hour. The hourly base rate may vary within the anticipated range based on factors such as the ultimate location of the position and the selected candidate's knowledge, skills, and abilities. Position may be eligible for additional compensation that may include commission (annual, monthly, etc.) and/or an incentive program. Benefits: Employees are eligible to receive a minimum of sixteen hours of paid time off every month and seven paid holidays throughout the calendar year. Employees are also eligible for additional paid time off in the form of bereavement leave, time off to vote, jury duty leave, volunteer time off, military leave, and parental leave. Applicants must currently be authorized to work in the United States for any employer without current or future sponsorship. EOE, including disability/vets

Job DescriptionPosition Summary When surgical instruments are sharpened and working properly, surgeons can focus on providing the best care for their patients. STERIS offers a variety of repair solutions to meet the needs of the Customer including onsite mobile repair services, in house repair lab services, or one of five national repair centers. You do not have to have previous instrument repair experience to be considered. This is an entry level job - we will train you! In this position, you will perform surgical instrument inspection, repair, and refurbishment. This role requires occasional travel by driving a company vehicle. If offered this position, STERIS will run a 7 year driving record check, as part of our onboarding process. What You Will Do As a Repair Technician Perform basic to intermediate inspection and repairs on surgical instrumentation using grinding wheels, buffing wheels, various hand and power tools, soldering, etc. Complexity of repairs and level of intricacy will vary. You will work in the field on a mobile repair truck, inside a repair lab or inside a hospital, based on the needs of the Customer within the assigned territory. Provide invoicing and documentation based on business need. Provide support various locations within assigned territory depending on the service agreements, Customer needs, and staffing levels. The Experience, Skills, and Abilities Needed High school diploma or GED required. At least 1 year of relevant experience*, or 1 year of experience at STERIS. All experience must be verifiable. Must be able to meet flexible schedules with early/late hours and occasional overnight/out of state travel, based on Customer and business needs. Must be able to pass a DOT medical/ physical exam and comply with all DOT regulations. Must have a valid driver’s license with an acceptable driving record (CDL not required) and maintain required vaccines. Ability to drive DOT regulated vehicle and conduct basic box truck safety checks. Must be at least 21 years old to meet the FMCSA age requirement for commercial interstate driving. Must be able to lift up to 25 pounds at times and push instrument carts ranging from 10-150 pounds at times. Must be able to be compliant with hospital/customer credentialing requirements. *What is relevant work experience? Hands-on repair, assembly, or product testing and use of small hand tools is a plus. Examples are small engine repair, cell phone and electronics repair, testing, or re-builds, carpentry, circuit board assembly and repair, sterile processing, industrial sewing, and jewelry repair. Maintenance, construction, welding, fabrication, and automotive repair can also be relevant. What STERIS Offers We value our employees and are committed to providing a comprehensive benefits package that supports your health, well-being and financial future. Here is a brief overview of what we offer: Extensive hands-on training and development Career progression path with STERIS Instrument Management Services and growth opportunities in other parts of STERIS Competitive pay + quarterly incentive plan Overtime opportunity Annual merit review Medical, vision, prescription, dental and life insurance 401(k) with a company match Paid time off that accrues from day one and paid holidays Tuition assistance Uniforms and all necessary tools provided Business travel and all related expenses paid You should be proficient in: • Soldering, • Welding Setups for Production, • Maintenance and Repair Skills, • Vehicle & Fleet Welding, • Equipment Repair & Maintenance, • Tool/Die/Mold Repair Skills

Job Description Kickstart Your Career in Production with Auto-Chlor! Location: 1530 Old Country Rd, Plainview, NY, 11803 Schedule: M-F, 7:00am-3:30pm Position: Warehouse Associate (Entry-Level) Are you ready to start a hands-on career where you can learn valuable skills, work as part of a great team, and take pride in what you create each day? Auto-Chlor is looking for motivated, reliable individuals to join our Production team — no prior experience required, just a great attitude and a willingness to learn! What's In It For You? • Competitive hourly pay of $22-$23/hr. Estimated yearly between $47,000-$52,000., • Full medical, dental, and vision benefits, • 401k, profit sharing, 2 weeks vacation days annually, 40+ hours of sick leave annually, and 7 paid holidays, • Career growth opportunities to move up in the company, • Ongoing paid training What You’ll Do: As a Warehouse Associate on our production team, you’ll play a key role in supporting branch operations by mixing, preparing, and packaging cleaning products used by our customers every day. You’ll receive training on all procedures and safety practices. Your responsibilities will include: • Mixing raw chemicals following Auto-Chlor’s formulas and safety procedures, • Filling, labeling, and sealing containers, • Preparing containers and keeping the production area clean and organized, • Safely operating equipment and wearing PPE when required, • Taking ownership of your tasks and ensuring products meet our high-quality standards What We’re Looking For: • Reliability, good communication skills, and teamwork mindset, • Positive attitude and willingness to learn, • Ability to lift up to 70 lbs and work in a fast-paced, hands-on environment, • Comfortable wearing all required PPE Why Join Auto-Chlor? At Auto-Chlor, we believe in growing our people. Many of our leaders started in this very role! If you’re ready to start your career, learn new skills, and be part of a company that values safety, teamwork, and a positive attitude - apply today and take the first step toward a rewarding career with Auto-Chlor! This is a safety sensitive position for which requires the safe operation of motor vehicles and/or heavy equipment and/or handling of industrial chemicals. Employment is contingent upon successfully passing a background check and drug screening after a conditional offer of employment.

Job DescriptionDescription: The Sushi Prep Cook prepares sushi rice, ingredients, and the core sushi assortment in the kiosk, working to company recipes and specifications and to company standards for quality, portion size, presentation, and food safety. Reporting to the Sushi Team Leader, this is a hands-on production role worked alongside experienced cooks. This is an entry-level position and the company’s primary training role. The Sushi Prep Cook develops knife technique, sushi fundamentals, and food safety knowledge on the job while contributing to daily production. All seafood arrives pre-portioned as fillets or saku blocks. There is no whole-fish butchery in the kiosks. Key Competencies Willingness to learn knife technique and sushi fundamentals, working knowledge of food safety and sanitation standards, attention to recipe and presentation detail, reliability and organization in a fast-paced production environment, and a professional, service-minded approach with customers, teammates, and store partners. Duties & Responsibilities • Prepare sushi rice and other ingredients according to company recipes and specifications., • Slice and portion fish from pre-portioned fillets and saku blocks, and prep vegetables for rolls and garnishes., • Produce the core sushi assortment to company standards for quality, portion size, presentation, and food safety., • Follow production guides, recipes, labeling requirements, and food safety procedures., • Inspect ingredients before use and report quality concerns to the Sushi Team Leader., • Clean and sanitize utensils, equipment, workstations, and food-contact surfaces, and keep the kiosk clean, organized, stocked, and customer-ready., • Report equipment, product quality, or safety concerns to the Sushi Team Leader or manager on duty., • Greet customers, answer product questions, and provide friendly, professional service. This job description outlines the general duties and responsibilities for the position. Other duties may be assigned as needed. Requirements: • At least 6 months of food handling experience in a kitchen, deli, prepared foods department, or similar setting., • Willingness to learn knife skills and sushi technique; training is provided., • Ability to understand recipes, product labels, production guides, food safety instructions, and workplace communications in English., • Current food handler certification, or the ability to obtain one within the required timeframe., • Reliable, organized, and able to work well with others in a fast-paced environment., • A professional and respectful approach with customers, coworkers, and store leadership., • Any sushi rolling or Japanese cuisine experience preferred., • Experience in a deli, prepared foods, or high-volume prep environment preferred., • Experience working directly with customers preferred., • Commitment to company mission, values, and professional customer interactions. Physical Requirements: • Ability to stand and walk for extended periods of time while working in a retail sushi kiosk., • Ability to lift, carry, push, or pull materials weighing up to 40 pounds, with or without reasonable accommodation., • Ability to bend, reach, squat, and use hands and arms to handle food, tools, materials, and equipment., • Ability to perform repetitive hand and arm motions associated with food preparation., • Ability to work around temperature changes, noise, water, and food production equipment., • Ability to maintain the physical stamina required to complete food preparation, stocking, cleaning, and customer service responsibilities throughout the shift. Hana Brands is an Equal Opportunity Employer

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries is currently seeking Bench Technicians/Electronic Assemblers. The suitable candidate should have some experience with mechanical, electrical assemblies, some soldering experience and should be familiar with basic test equipment. This position focuses on assembling electronic equipment such soldering wires onto switches and integrating the switches into metal housings as well as packaging the finished product. You will also be integrating circuit boards into enclosures, wiring them and final testing the equipment once completed the data must be entered into a data base so basic computer skills are required. Essential Requirements: • Strong work ethic, • Minimal soldering experience, • Basic knowledge of hand tools, • Mechanically inclined, • Follow assembly & test procedures, • Maintain a safe and organized work area, • Must be able to read a wiring diagram, • Document and submit all failures of equipment to engineering QA Department, • Maintain quality control on the production of all equipment assembled, • Ensure all company equipment and tools are in proper working condition, • Maintain manufacturing records of all products Education / Experience Requirements: Qualified candidates must have some education in digital electronics and can be entry level but 1+ year of electronics assembly work is preferred as well as basic soldering skills and the knowledge of electronic test equipment such as DVM's is required. Experience with Microsoft Office and Outlook is a plus. Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to Recruiting@Parabit.com. All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job DescriptionSMT / Hi-Rel Solder Assembler Salary: $45,000-$58,000 based on experience | Entry-Level & Experienced Opportunities Join a growing electronics manufacturing team where you can build valuable technical skills and advance your career. Our client offers opportunities for both entry-level SMT assemblers and experienced Hi-Rel solder professionals, with training and advancement opportunities available. Job Duties & Responsibilities -Assemble, inspect, and solder high-reliability printed circuit boards (PCBAs) and sub-assemblies using surface-mount and through-hole components. -Operate and work with SMT production equipment including stencil printers, pick-and-place machines, reflow ovens, PCBA cleaning equipment, soldering equipment, microscopes, and other assembly tools. -Perform precision hand soldering and component assembly in accordance with applicable IPC standards, engineering drawings, and assembly documentation. -Maintain a clean, organized, and ESD-controlled work environment while following established quality, safety, and production procedures. Required Skills & Experience -Entry-Level SMT: High school diploma or equivalent, strong attention to detail, good hand-eye coordination/manual dexterity, and willingness to learn electronics manufacturing. -Hi-Rel Solder: 2+ years of PCB/electronics assembly experience with hands-on precision soldering of surface-mount and through-hole components. -Ability to read and understand technical documents, assembly instructions, and engineering drawings, and work effectively both independently and as part of a team. -Ability to work with small electronic components and sit or stand for extended periods; ability to lift up to 25 pounds. Preferred Skills & Experience -Experience soldering to IPC J-STD-001 and/or IPC-A-610 Class 3 standards, with IPC certification preferred. -Familiarity with ESD procedures, fine-pitch components, microscope/magnification work, SMT equipment, or basic soldering is a plus. Compensation & Benefits -Entry-Level SMT Assembler: $45,000-$50,000 -Hi-Rel Solder Assembler: $54,000-$58,000 based on experience -Comprehensive benefits including health, dental, vision, life insurance, short- and long-term disability, flexible spending options, 401(k), PTO, and 11 paid holidays. Ready to start or advance your career in electronics manufacturing? Apply today! EOE/Disability/Veteran By applying for this job, you agree to receive calls, Al-generated calls, text messages, or emails from Synerfac Technical Staffing and our contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undeliverable messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy at www.synerfac.com/privacy/ Sam Twilley stwilley@synerfac.com Synerfac Technical Staffing 732-271-9333

Job Description Job Summary: Parabit is seeking a dependable and detail oriented Powder Coater to support the preparation, coating, curing, and inspection of metal parts and custom fabricated products. This role is intended for candidates with entry level to three (3) years of powder coating, paint shop, manufacturing, automotive painting, or finishing experience. The Powder Coater will work with the Paint Shop and Production teams to produce consistent, high quality finishes while following work instructions, safety procedures, and production schedules. Essential Duties and Responsibilities: • Prepare metal parts for powder coating by cleaning, sanding, deburring, masking, plugging, hanging, staging, and performing other surface preparation steps as required., • Apply powder coating to parts and custom products according to work orders, shop instructions, approved finishes, and quality standards., • Operate powder coating spray equipment, booths, curing ovens, racks, hooks, and related shop equipment in a safe and proper manner., • Assist with setup and changeover of colors, powders, parts, racks, and masking requirements for different jobs., • Monitor coverage, texture, color, cure time, oven temperature, and overall finish quality throughout the coating process., • Inspect finished parts for defects such as thin coverage, contamination, orange peel, pinholes, scratches, chips, inconsistent texture, or color variation., • Perform basic touch up, rework, and corrective preparation when needed, or escalate finish concerns to the supervisor or quality team., • Read and follow basic work orders, fabrication drawings, specifications, production travelers, labels, and verbal instructions., • Handle finished and unfinished parts carefully to prevent damage, contamination, and rework., • Maintain a clean, organized, and safe work area, including routine cleaning of equipment, booths, tools, floors, racks, and surrounding areas., • Track materials, powders, masking supplies, hooks, racks, and related shop consumables as directed., • Follow all company procedures, safety rules, personal protective equipment requirements, and environmental handling requirements for powders, chemicals, and shop equipment., • Work with fabrication, assembly, quality, and production personnel to support schedule requirements and timely completion of customer orders. Qualifications and Experience: • Entry level to three (3) years of powder coating, paint shop, manufacturing, automotive painting, metal finishing, or related hands-on production experience preferred., • Prior experience with powder coating equipment, spray application, curing ovens, masking, sanding, or surface preparation is helpful but not required for candidates who are willing to learn., • Ability to follow written and verbal instructions, work orders, basic drawings, specifications, and established procedures., • Strong attention to detail and ability to recognize visible finish defects or quality issues., • Ability to work efficiently while maintaining quality, safety, and care in handling parts., • Dependable, punctual, self motivated, and able to work independently or as part of a team., • High school diploma or equivalent preferred. About Parabit Parabit Systems, headquartered on the south shore of Long Island, is a well-established company that continues to expand into key markets. Since 1995, Parabit has grown into a leading manufacturer and provider of ATM Card Access Control, kiosks, vandal-resistant hot dial, autodial, and speed dial telephones, CCTV/IP camera systems, DVR and NVR equipment, and digital signage. Parabit also designs, fabricates, and installs a wide range of displays and enclosures with integrated technology. Parabit Systems is focused on growth, innovation, and developing strong leaders. Parabit Systems is an equal opportunity employer that offers a positive work environment and challenging career opportunities. Please email your resume to Recruiting@Parabit.com. Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Job Summary: The Custom Project Manager is an integral part of the Sales Support Team. This self-driven individual leads in Project Management for custom products; defines project objectives for the product, creates and maintains project timelines, creates and maintains sales support deliverables as well as reports on status to meet delivery goals while providing high level customer support. The Custom Project Manager executes the process through swift, sound and complex decision making; following standards and recommending improved policy and procedure while leading projects of Custom Product and escalated standard projects. This role coordinates cross functionally with Inside Sales, Purchasing, R&D, our global manufacturing offices and Order Processing as well as works externally with Outside Sales Reps, Customers, Specifiers, and Contractors. Major Duties and Responsibilities: • Manage projects for Custom Product and escalated orders from order entry through shipping to meet on time delivery performance., • Maintain the Custom Product project schedule via Monday as well as our internal project task platforms with accurate data., • Create sales support documentation including, deposits, waivers, quotation revisions and release of production information to maintain the project schedule. Ensure accurate documentation., • Able to create, update and maintain quotations within SAP and our HubSpot CRM., • Process Quote Reviews in a timely and accurate manner., • Ensure the accuracy of Rep Sales and Commission credits., • Answer elevated Customer and Rep inquires in an accurate, timely, efficient and courteous manner., • Supply air freight quotations to customers as needed., • Work closely with our global factories to maintain bills of materials and routing schedules and resolve technical issues with our overseas engineering group., • Work cross functionally to review and resolve engineering issues during product development., • Review and redline technical engineering drawings to reflect updates prior to sending to the customer., • Allocate and optimize resources in coordination with global factories and budget to meet project goals. Facilitate communication, resolve conflicts and motivate team members. Identify potential risks, develop mitigation strategies and implement contingency plans., • Execute swift judgement and decision-making practices based on the best available information., • Continuously maintain a high level of product knowledge to proactively recognize and avoid project issues., • Work across departments in order to resolve rep or customer issues concerning project lead times, pricing, and competition., • Perform root cause analysis of complications on projects or company procedures and suggest short and long-term resolution with implementation. Critical Success Factors: • Maintaining on time delivery of accurate delivery of product., • Provide prompt updates to external and internal users based on customer need., • Support and implement initiatives to reduce lead time of deliverables to clients. Requirements: • 5-10+ Years of experience in the management of projects or products of manufactured items., • Bachelor’s degree in business management or related field related to manufacturing., • Excellent communication both verbal and written, time management, managing projects, reporting and organizational skills., • Proficient in project management software., • Attention to detail in composing materials, establishing priorities and meeting deadlines., • Ability to work in a fast-paced environment with demonstrated ability to manage multiple competing tasks/demands and get results., • Must have the ability to learn new skills and facilitate training., • Must be capable of problem solving and independently making decisions based on financial and technical requirements., • Must be capable of managing relationships with a focus on long term partnerships., • Must be a team player capable of coordinating and communicating with multiple departments., • Proficient with Microsoft Suite (particularly Excel, Word, PowerPoint and Teams)., • Ability and willingness for U.S and international travel based on business need., • Knowledge of SAP, HubSpot, ZenDesk, Monday a plus., • Basic electrical knowledge with knowledge of manufacturing/industrial design a plus., • Mandarin speaking a must. We recognize people as our most valuable asset. Our competitive salary and benefits package includes: paid time off; medical & dental coverage (including family coverage), vision, life, 401(k); tuition assistance; and continuous training and development. For immediate consideration, submit your resume as directed. Given the high volume of responses, only qualified candidates will be contacted. WAC is an equal opportunity employer and provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, gender, gender identity, sexual orientation, national origin, age, disability, genetics, or any other protected characteristic. In addition to federal law requirements, WAC complies with applicable state and local laws governing non-discrimination in employment in all its locations. This policy applies to all terms and conditions of employment, including, but not limited to, recruiting, hiring, placement, promotion, termination, recall, transfer, leaves of absence, compensation, and training. Please note, all responsibilities outlined in the above job description are subject to change as needed. All efforts will be made to ensure proper notice is given for changes in responsibilities.

Job Description This is an entry-level role where you will be managing our warehouse and chemicals production. You will be overseeing our warehouse operations which includes shipping and receiving, inventory management, and preparing our environmentally safe cleaners and sanitizers. We provide extensive training! The Benefits: • Competitive hourly pay of $22-$23/hr. Estimated yearly between $47,000-$52,000., • Consistent schedule of Monday-Friday, 7:00am-3:30pm, • Full health benefits after 30 days, medical, dental, vision, 401k, profit sharing, and paid time off including holidays., • Stability, longevity, standard working hours, and promotion opportunities for multiple career paths. The Requirements: • Ability to use hand tools and lift up to 70lbs., • The willingness to learn and grow your skill set. Our Story: We are a national leader serving the restaurant and hospitality industries providing the latest in dishwashers, sanitizing equipment, and cleaning products to our customers. Location: 1530 Old Country Rd, Plainview, NY, 11803

SNIPES Manager in Training (MIT) Full Time Hourly Salary $17.21-$20.65 per hour We live sneakers, streetwear, and neighborhood culture! All Day! Every Day! With more than 750 stores in Europe and the USA, SNIPES is one of the leading sneaker and streetwear retailers worldwide. Since opening its first store in Essen, Germany in 1998, SNIPES has been an integral part of street culture and is constantly growing thanks to its proximity to the community and regular openings worldwide. At SNIPES, everything revolves around youth culture. In stores and online at snipes.com and snipesusa.com, our community finds a wide range of internationally renowned sneakers and apparel brands for the latest fits from head to toe. We dive deep into subcultures, sponsor some of the biggest hip-hop festivals, events, and sports teams throughout the world to stay close to our community and keep our deep roots in the global street culture community. Therefore, we work closely with key figures from the scene like DJ Khaled, our Chief Creative Officer. But whether it's sponsorships or developing grassroots projects we prioritize giving back to the community in everything we do. SNIPES has always kept an ear to the streets to create a meaningful impact in the communities we serve. Through our community program "SNIPES serves" and its localized approach we support the needs of our communities, empower, and celebrate our dynamic culture. Overview: The Manager in Training will fully manage the store's staff and operations in absence of Store Manager and Assistant Manager. This is an entry level management role within the store level. Responsibilities • Demonstrate leadership in driving sales and profitability by achieving or exceeding all established store and individual goals. Personally, demonstrate high level of customer service, • Assist Store Manager/Assistant Manager with communicating the store's operational goals and directives to maximize the store teams' contributions towards meeting the sales plan, • Assist Store Manager in monitoring and evaluating individual performance in the following areas: sales volume, hourly production, unit per transaction (UPTs), charge accounts and loss prevention, • Demonstrate proper leadership skills to assist Store Manager in managing the store's staff, as necessary, • Ability to demonstrate timely execution and compliance of floor set guides and promotions, • Assist Store Manager/Assistant Manager in directing and maintaining merchandise presentation according to Visual Merchandising standards and current floor set, • Recognize, understand and communicate customer merchandise needs and recognize when the store's merchandise assortment meets, and fails to meet, these needs, • Work with the Store Manager to ensure markdowns and transfers are completed correctly and in a timely manner, • Assist Store/Assistant Manager in ensuring store meets Company standards for cleanliness, both on the sales floor and in the stockroom Key Partners • Store Management, • Human Resources, • District Manager, • Asset Protection Qualifications • Must be at least 18 years of age, • At least 2+ years' experience in retail preferred, • High School Diploma or equivalent; college degree a plus but not required, • Able to respond to store alarm problems as needed, • Communication and organizational skills, • Strong drive to achieve results, • Takes initiative and has problem solving skills, • Candidate will be required to stand for long periods of time throughout their shift., • Lifting between 15-30 pounds. Skills & Cultural Success Factors • Enthusiasm for the brand, • Strong customer service skills, • Excellent communication skills, • Strong problem solving skills, • Team player with the ability to lead a team, • Disciplined and self-motivated, • Goal oriented, • Adaptable and flexible, • Fast learner Benefits with SNIPES • Generous Employee Discount, • Paid Holidays, • PTO (Paid Time Off), • Bonus Plan, • Affordable Health Insurance, • Retirement Contributions Note: Job descriptions are used for informational purposes only, are not to be considered all-inclusive of responsibilities within a position and may change periodically with or without notice. In addition, we reserve the right to add, delete, change duties, formally or informally, verbally or in writing, at any time for any position. Job descriptions do not alter the at-will policy of the Company, meaning that the employee or employer can terminate employment at any time, for any reason, with or without cause. Snipes USA and all its subsidiary Companies are equal opportunity employers. We will not discriminate or make hiring decisions based on race, religion, creed, color, national origin, sex, political affiliation, sexual orientation, or any other criteria that would violate any Federal or State laws.

As a Warehouse Associate on our production team, you’ll play a key role in supporting branch operations by mixing, preparing, and packaging cleaning products used by our customers every day. Kickstart Your Career in Production with Auto-Chlor!. Warehouse Associate (Entry-Level).

Packaging Line Worker (Packaging Operator)ENTRY LEVEL JOB; ANY WAREHOUSE, ASSEMBLY, PACKAGING, MANUFACTURING, OR PRODUCTION EXPERIENCE!The Packaging Line Worker (Packaging Operator) is responsible for packaging, labeling, inspecting, and preparing medical devices for distribution.This role plays a c

Warehouse and Production Full-Time Requisition #: PRODU003801 Description This is an entry-level role where you will be managing our warehouse and chemicals production.

Job Description About The Damadeo Agency: We're a premier Allstate Agency specializing in Auto and Home insurance. Our dedicated staff work incredibly hard to ensure that our clients are completely satisfied! We only hire the best and most dedicated employees to our team. As an Entry Level Sales Representative you will work with a dynamic team of producers that share your desire to win. All sales reps are provided warm leads EVERY DAY. Position pays a competitive base with a generous commission structure that works well for those who are disciplined and follow our proven sales process. In addition, lucrative bonuses are available for the taking for those who exceed their sales goals! This position is based in Seaford, NY. All who apply MUST complete a self-assessment to be considered for this position. Responsibilities: • Work hard every day and meet new business production goals, • Prospect using warm leads provided, develop insurance quotes, make sales presentations, and close deals, • Have an awesome attitude, • Use professional phone etiquette Requirements: • Minimum of 1-year experience in a sales environment, • Currently have a Property & Casualty license or willingness to obtain one, • Ability to problem solve and explain solutions in a simplistic manner, • Must be a team-player and have the desire to WIN Job Type: Full-time Salary: $60,000.00 - $90,000.00 per year Benefits: • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Schedule: • 8 hour shift, • Monday to Friday Supplemental Pay: • Bonus pay, • Commission pay COVID-19 considerations: To keep our employees as safe as possible, we’ve installed clear plastic barriers, and provided masks, gloves, and hand sanitizers. Any customers or prospects who walk into the office are required to wear a mask. Work Location: One location