Entry level production jobs in Rochester, New YorkCreate job alerts

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit http://www.pearce-services.com. Your Impact Pearce is seeking Entry Level HVAC Technicians to join our team for servicing and repairing commercial HVAC equipment on telecom shelters located on Cell Tower sites. This is a fast-paced and rewarding job that is best suited for individuals who are responsible, self-directed, highly motivated, willing to travel, and looking to learn and grow in the Telecom industry. This is a regional position. Candidates should reside within 60 miles of Kingston, New York area. Core Responsibilities • Maintaining cooling systems – diagnosing, troubleshooting, repairing, or installing and replacing components of entire systems., • Conducting performance checks and regular maintenance on HVAC equipment., • Performing additional maintenance or upgrades to out-of-season HVAC equipment., • Responding to service calls in a timely manner, including emergency call out services., • Timely and accurate completion of daily work reports., • Operate and maintain a motor vehicle safely and legally per the PEARCE Employee Handbook and insurance requirements. Specific duties may vary or evolve over time based on business and client needs. Core Experience • Must be Universal EPA Certified (Required)., • Basic knowledge of electronic, mechanical, and electrical components including refrigeration systems is preferred., • Must be able to communicate effectively both verbally and by email. Physical/Work Environment At Pearce safety is our number one concern. Candidates must be able to comply with OSHAFCC/FAA/EPA Standards. • Candidates should reside within 60 miles of Kingston, New York area., • Must be available for after-hours and weekend call outs on occasion., • Extensive daily travel in an independent work structure., • Occasional overnights required-company pays all travel costs and provides per diem., • Driving to remote work sites as needed., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds)., • Will be required to pass a Department of Transportation (DOT) physical. Compensation: $49,920 - $56,160 salary/DOE At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range $24—$26 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at www.Pearce-Services.com!

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol-free working environment. General Job Description: Performs duties of an expediting nature, including close follow-up in operational details to assure timely processing and shipment of parts and production with established schedules and priorities. Keeps supervision informed at all times of work in process, status. Contacts clerical engineering and supervisory personnel as required or as assigned to provide assistance in resolving problems and ensuring timely action with respect to such things as material procurement, parts scheduling, dispatching, assembly, inspection and shipment of products. Minimum Qualifications: • Entry level, high school diploma or equivalent, • Minimum 1-year manufacturing knowledge and/or production control experience, • QA inspection experience helpful, • Fluent in verbal and written English, • Must be Forklift Certified Specific Duties: • Provide material support to work center, • Pull kits of raw materials for work orders and issue them to work centers, • Stage job materials to be shipped for outside operation, • Move in-process materials between work centers, QA and shipping/receiving to efficiently facilitate production and finished goods availability, • Assure conformance to all materials handling, identification and storage policies, • Assist in maintaining accurate inventory records, • Assist in performing all inventory transactions on the computer system, • Assist in performing shipping and receiving activities and preparation of related paperwork, • Recommend continuous improvement actions for improving work processes

Job Description We are seeking an entry-apprentice level Tool and R.F. Die Maker to join our manufacturing team. Little to no experience necessary. This role will learn to be responsible for designing, fabricating, manufacturing, repairing, and maintaining precision tools and dies, fixtures and related equipment used in production operations. This role requires selecting appropriate materials, setting up and operating a variety of machine tools and ensuring that tools and dies meet dimensional and quality specifications to support efficient, safe and reliable production. The ideal candidate will have basic skills working with tools. Most importantly, must be hardworking, have a willingness to learn, good attitude, and be punctual. We will teach how to build our dies. At least a limited understanding of the English language is preferred. Any experience in manual milling, setup operations, or metalworking is a plus, but not required. The ideal candidate will have basic skills working with tools. Most importantly, must be hardworking, have a willingness to learn, good attitude, and be punctual. We will teach how to build our dies. All employees must show up on time and communicate with their manager with any changes to their work schedule. All employees are required to treat coworkers and managers with dignity and respect and adhere to company policies regarding workplace conduct and professionalism.. We have a zero-tolerance policy regarding bullying and harassment of any kind. Violations of this policy will result in immediate disciplinary action. Follow all company safety policies and procedures, including proper use of personal protective equipment (PPE), machine guarding, and lockout/tagout procedures. Work Schedule: Typical schedule: full-time, 40 hours/week + Overtime and/or weekend, may be available or required based on production needs, consistent with applicable wage and hour laws. Compensation and Benefits: Hourly Range: $17–$19 per hour, depending on experience and qualifications. Benefits: [e.g., health insurance, dental, vision, 401(k), paid time off, holidays, company specific events, etc.] EEO / At-Will Disclaimer (U.S.) Rochester 100 Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, sex, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, veteran status, or any other status protected by applicable federal, state, or local law. This job description is intended to describe the general content of and requirements for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities, or requirements. Rochester 100 Inc. reserves the right to modify this job description at any time, subject to applicable law. Employment with Rochester 100 Inc. is at-will where permitted by law and is not intended to create a contract of employment, express or implied. Please note, all applicants for employment will be considered as applying for all departments at Rochester 100 Inc. Our company operates on a rotational work schedule, which requires employees to be able to work in all departments at any time. All employees are considered temporary employees for the first 30 days of employment probationary period. At any time during the probationary period, temporary employees may be evaluated and employment may be terminated. After the probationary period, your performance will be evaluated and, if appropriate, you will be offered a permanent employment position. This position offers an opportunity to work in a dynamic manufacturing environment where precision and craftsmanship are highly valued. If you have the expertise and experience required, we encourage you to apply! Please visit our website www.Rochester100.com to see all the products we produce in our factory.

Job Description Join the plating team of a fast-paced high-tech manufacturing company (www.nicoform.com). Mask, mount in fixtures and plate (electroform) precision machined parts. Use power supplies, micrometers, calipers, and other instruments to set process parameters and check finished parts. An excellent entry- to mid-level position for a handy, meticulous, well-organized individual with strong attention to detail and good computer skills. High school diploma or equivalent. 2-3 years of plating, maintenance, machining, or production experience a plus. Will train the right individual. Great opportunity for a motivated, conscientious person. Full time position with benefits (vacation, medical, retirement plan, profit sharing). Day shift only. Starting pay $18-$25/h with fast growth potential. Position open to US Citizens and Permanent Residents only. E-mail resume to inform@nicoform.com or fax to 585-454-5167. \nCompany Description About NiCoForm NiCoForm is the world leader in Nickel-Cobalt electroforming, a cutting-edge technology with applications across multiple industries. Since 1999, we’ve been pioneering solutions with our proprietary alloy NiColoy®, used in everything from: -\tAerospace components -\tHigh-performance electroformed bellows -\tCatheter tip-forming dies -\tOptical and microfluidic mold inserts At NiCoForm, you won’t just be part of a company — you’ll be part of a team that thrives on solving unique, high-value engineering problems. If you’re looking for a career where you can innovate, take ownership, and grow with a world-class technology leader, this is it. About NiCoForm\r\nNiCoForm is the world leader in Nickel-Cobalt electroforming, a cutting-edge technology with applications across multiple industries. Since 1999, we’ve been pioneering solutions with our proprietary alloy NiColoy®, used in everything from:\r\n•\tAerospace components\r\n•\tHigh-performance electroformed bellows\r\n•\tCatheter tip-forming dies\r\n•\tOptical and microfluidic mold inserts\r\n\r\nAt NiCoForm, you won’t just be part of a company — you’ll be part of a team that thrives on solving unique, high-value engineering problems. If you’re looking for a career where you can innovate, take ownership, and grow with a world-class technology leader, this is it.

Job Description Flexographic Press Operator (Narrow Web) Location: Rochester, NY Employment Type: Full-Time Shift: 2nd Shift (Training on 1st Shift) About the Role We are seeking motivated, detail-oriented individuals to join our print production team in Rochester as Flexographic Press Operators. Our Narrow Web Printing department manufactures custom, high-quality printed labels operating multi-color flexo presses ranging from 6-color to 10-color (10" width). Whether you are looking to start a technical trade with strong mechanical aptitude or are an experienced print operator looking for a competitive rate and room to grow, we have an open position for you. Pay & Progression Structure We offer competitive starting pay matched to your level of experience, along with shift differentials and scheduled performance reviews: • Entry-Level / Trainee (No Press Experience):, • Starting Rate: $20.00 / hour + Shift Differential, • Growth: Performance review and rate increase after 90 days., • Requires general mechanical ability or hands-on trade experience., • Intermediate (Some Press Experience):, • Starting Rate: $22.00 / hour + Shift Differential, • Growth: Performance review and rate increase within 90–120 days., • Experienced (Flexographic Press Experience):, • Starting Rate: $24.00+ / hour (Negotiable based on depth of experience) + Shift Differential, • Growth: Performance review and rate increase within 90–120 days. Key Responsibilities • Operate and maintain 6-color to 10-color narrow web flexographic presses (10" width)., • Mount printing plates accurately onto cylinders., • Mix and match inks to meet precise customer color specs., • Perform continuous monitoring and critical machine adjustments during runs to maintain strict quality standards., • Maintain clean, organized, and safe work areas during production runs. Schedule & Training • Primary Shift: 2nd Shift (Shift differential paid on top of base rate)., • Training Period: All new hires complete paid training on 1st Shift until cleared for independent press operation. Qualifications & Requirements • Mechanical Aptitude: Strong hands-on mechanical ability or background in machine operation/manufacturing., • Basic Math Skills: Ability to make production calculations using a calculator., • Reliability: Dependable transportation and a strong work ethic with consistent attendance., • Communication: Clear verbal and written communication skills to collaborate with production teams.\nCompany Description Adflex Corporation is New York’s trade shop for exceptional versatility and competitive prices. Since 1978, we have continued to build on our reputation for outstanding work in photopolymer plating, pressure-sensitive product labels, digital prepress and mounting services. Our technical consultants are skilled in all areas of fabrications. For your next project, please contact us for a free quote, estimate or consultation. Adflex Corporation is New York’s trade shop for exceptional versatility and competitive prices. Since 1978, we have continued to build on our reputation for outstanding work in photopolymer plating, pressure-sensitive product labels, digital prepress and mounting services. Our technical consultants are skilled in all areas of fabrications. For your next project, please contact us for a free quote, estimate or consultation.

Job Description Finishing & Inspection Technician (Entry-Level) Company: Adflex Job Type: Full-Time Pay: $18.00 per hour Shift: 2nd or 3rd Shift (Shift Differential Included) Position Overview Adflex is currently hiring for our Finishing & Inspection Department, a critical part of our label production process. In this role, you will take printed label rolls from our Press Department and convert them into finished products based on customer specifications. This position is ideal for someone who takes pride in accuracy, consistency, and attention to detail. Even small errors can impact the final product, so a careful and focused approach is essential. This is an excellent entry-level opportunity for individuals looking to build a career in manufacturing. We provide hands-on training and promote from within for employees who demonstrate reliability and strong performance. Key Responsibilities • Carefully read and follow work orders to meet exact customer specifications, • Inspect printed label rolls for quality, defects, and consistency, • Operate finishing equipment with attention to precision (training provided), • Convert large rolls into finished quantities with accurate counts and measurements, • Use a calculator to verify counts and ensure order accuracy, • Maintain a clean and organized workspace Training & Advancement • All training is conducted on 1st shift, • Transition to assigned shift after training is complete, • Ongoing opportunities for advancement within Adflex Qualifications • Reliable transportation, • Strong work ethic and dependable attendance, • Strong attention to detail and ability to stay focused on repetitive tasks, • Basic math skills (calculator use required), • Good communication skills Compensation & Benefits • Starting pay: $18.00/hour, • Shift differential for 2nd and 3rd shifts, • Raises and benefits available after a 90–180 day evaluation period, • Long-term growth opportunities within the company #hc232877

Job DescriptionPest & Wildlife Management Specialist (Experienced or Will Train) Job Summary Bugman Pest Control & Wildlife is hiring a Pest & Wildlife Management Specialist to join our growing team. This is a hands-on, field-based role focused on solving real pest problems, building customer relationships, and delivering high-level service across residential, commercial, and industrial accounts. We are actively seeking experienced pest control professionals who want more autonomy, better earning potential, and the opportunity to expand into advanced services like wildlife control and exclusion. No experience? We will train the right person with the work ethic and mindset to succeed in a performance-driven environment. This is not a “spray and go” job—this is a skilled trade with real upside. What You’ll Do • Perform detailed inspections and develop treatment plans for insects, rodents, and wildlife, • Deliver services across residential, commercial, and industrial properties, • Execute pest control treatments using industry best practices and IPM principles, • Identify entry points and contribute to exclusion and long-term prevention strategies, • Operate and maintain company vehicle, equipment, and materials professionally, • Communicate clearly with customers, explaining findings, treatments, and recommendations, • Document all services accurately, including materials used and conditions found, • Work independently, managing your route and schedule with minimal supervision, • Continuously improve through training in advanced pest control and wildlife techniquesWhat We’re Looking For, • Pest control experience preferred (but not required), • Strong problem-solving and critical thinking skills, • High level of accountability and reliability, • Ability to work independently and manage a daily route, • Comfortable working in attics, crawlspaces, heights, and less-than-ideal conditions, • Customer-first mindset with strong communication skills, • Safety-focused approach at all times, • Valid driver’s license with a clean driving record, • Ability to lift and carry up to 50 lbs, • High school diploma or equivalentCompensation & Benefits, • Competitive hourly pay + production incentives, • First-year earning potential: $50,000+ (higher for experienced technicians), • Medical Insurance, • Company-provided truck, equipment, and materials, • Paid training and certification support, • Opportunities to grow into advanced services (wildlife, exclusion, commercial accounts), • Clear path for advancement within a growing companyWhy Bugman Pest Control & Wildlife? We’re not a corporate operation—we’re a family-owned company backed by a larger organization with real resources, systems, and growth plans. You’ll have the opportunity to: • Build a route you own, • Increase your income through performance, • Learn higher-value services most companies don’t offer, • Be part of a team that is actively growing through expansion and acquisition

Job Description The Louis S. Wolk Jewish Community Center of Greater Rochester is located alongside the Erie Canal in Brighton and is a 200,000 square foot facility that houses our state-of-the-art fitness, wellness and recreation programming, an aquatics center, a Professional Theatre, Children’s Center and our Camping Program. We pride ourselves on providing our members with quality educational, cultural arts and social programming, and we are an inclusive community center that welcomes people of all faiths, backgrounds, and ages. The Campaign Manager is a key member of the Development team, responsible for managing donor data systems, implementing annual campaign strategies, tracking campaign performance, and generating reports that inform strategic decision-making. This role also supports stewardship activities, coordinates fundraising event logistics, sends mass donor communications, and responds to general donor inquiries. The ideal candidate is proactive, analytical, and equally comfortable behind a spreadsheet or engaging with donors, volunteers, and senior staff. They bring care, discretion, and strong communication skills to this critical role, helping to strengthen community impact through effective and efficient development operations. Essential Duties and Responsibilities: Donor Data & Reporting • Manage and optimize the Raiser’s Edge donor database to ensure accurate and timely gift entry, record maintenance, and overall data integrity., • Leverage advanced features in Raiser’s Edge, including dashboards and segmentation tools, to monitor campaign performance and donor engagement., • Generate and maintain detailed reports on fundraising activity, donor trends, and development metrics to inform strategy and decision-making., • Partner with the finance team to reconcile donations and ensure accurate monthly and annual revenue reporting., • Serve as the primary point of accountability for donor data accuracy and the creation of reports that support development planning, stewardship, and organizational impact. Donor Cultivation, Stewardship & Engagement • Maintain & build strong, ongoing relationships with donors through personalized cultivation and stewardship strategies to ensure high donor retention and appreciation., • Support a portfolio of 100–250 mid-level donors (gifts ranging from $250–$2,500), including tracking touchpoints, ensuring timely follow-ups, and identifying upgrade opportunities., • Collaborate with the Director of Development to identify donors with major gift potential and coordinate cultivation strategies., • Execute donor recognition activities, including thank-you letters, public recognition, naming opportunities, and impact reports., • Assist in identifying and cultivating planned giving prospects to help build long-term sustainability. Communications & Content Creation • Manage department email communications using platforms such as Constant Contact & Raiser’s Edge; design, execute, and analyze email campaigns., • Create compelling fundraising content for appeals, newsletters, social media, and stewardship materials., • Support production of development letters, reports, and documents (e.g., mail merges, labels, spreadsheets). Fundraising Campaigns & Events • Plan, manage, and execute all annual fundraising campaigns, including direct mail, email, and digital giving efforts, in alignment with strategic goals., • Coordinate logistics for development events, including invitations, RSVP tracking, vendor communication, setup, and post-event follow-up., • Develop and manage sponsorship opportunities; cultivate relationships with local businesses for event partnerships and matching gifts. Administrative & Departmental Support • Respond to donor and community inquiries with professionalism and timely follow-up., • Maintain organized digital and physical development records., • Provide cross-functional support for development initiatives, events, and general office functions. Education and Experience • Bachelor’s degree required; relevant fields include communications, nonprofit management, marketing, or related discipline, • 1–3 years of experience in nonprofit development, fundraising operations, or donor engagement, • Proficiency with donor databases (Raiser’s Edge or similar CRM required), including queries, reports, and data segmentation, • Strong written and verbal communication skills; experience creating donor-centric content is a plus, • Proven ability to manage multiple priorities, meet deadlines, and pay close attention to detail, • Demonstrated experience planning and coordinating fundraising campaigns or events, • Strong analytical skills; ability to interpret data and apply insights to campaign strategies, • Familiarity with email marketing tools (e.g., Constant Contact) and Microsoft Office Suite, • Ability to work independently and collaboratively in a fast-paced, mission-driven environment, • Comfort interacting with donors and community members with professionalism and discretion Benefits • Health, Dental and Vision, • Retirement Plan, Life and Disability Insurance, • Employee Assistance Program, • Free membership to our Fitness and Aquatics Center

Job Description Applications Engineer - Innovations Team Brinkman Products Brinkman Products is looking for an Applications Engineer to join our Innovations Team. This role is open to entry-level and mid-level engineers who are excited to work hands-on with manufacturing equipment and help deliver complete, turnkey manufacturing solutions for our customers. Whether you're early in your career and eager to learn, or you already have experience and are ready to take on more ownership, this role offers the opportunity to work on real projects that move from concept to production. What You'll Do As part of the Innovations Team, you'll help turn ideas into working manufacturing solutions: • Support the development, testing, and implementation of turnkey manufacturing solutions, • Work hands-on with manufacturing equipment, tooling, fixtures, and processes, • Assist with application development from concept through validation and production handoff, • Collaborate with customers to understand application needs and performance requirements, • Work closely with internal engineering, manufacturing, and sales teams, • Troubleshoot and improve processes to enhance quality, efficiency, and reliability, • Support new product introductions, customer trials, and demonstrations, • Travel to customer facilities as needed to support training, implementation, and startup of manufacturing solutions, • Help document processes, test results, and best practices Responsibilities and level of ownership will be aligned with experience, with room to grow. What We're Looking For • Entry-level: Strong interest in manufacturing, process development, and hands-on engineering, • Mid-level: 3-7 years of experience in manufacturing, applications engineering, process engineering, or similar roles, • Mechanical aptitude and comfort working in a shop or manufacturing environment, • Proficiency with SolidWorks is desired (experience creating or modifying models, fixtures, or tooling), • Lathe/Machining Experience is desired, • Curiosity, problem-solving mindset, and willingness to learn, • Ability to work collaboratively and communicate clearly with customers and teammates Why This Role Appeals to Today's Engineers • Hands-on work: This is not a desk-only engineering role, • Real impact: You'll work on solutions that go into production and directly support customers, • Growth path: Entry-level engineers receive mentorship and training; mid-level engineers gain increased ownership, • Respect for balance: We value sustainable workloads and clear expectations, • Variety: Exposure to different applications, equipment, and customer challenges What We Offer • Competitive salary based on experience, • Comprehensive medical, dental, and vision benefits, • 401(k) with company match, • Paid time off and paid holidays, • Salary Range: $70,000 to $125,000/yr. If you enjoy solving real manufacturing problems, working hands-on with equipment, and seeing your ideas become working solutions, we encourage you to apply-even if you don't meet every qualification. Job Posted by ApplicantPro

Job Description PLEASE STATE WHICH OF THE FOLLOWING TWO JOBS YOU ARE INTERESTED IN WHEN YOU SEND YOUR RESUME. Assembly Technician 1.0 Executive Summary Torion USA is seeking a motivated and detail-oriented entry level assembler to join our manufacturing team. In this role, you will support the assembly, fabrication, installation, commissioning, and testing of fusion fuel cycle process piping systems. The position will report to the Torion USA Manufacturing Manager. The ideal candidate is mechanically inclined, eager to learn, comfortable working with hand and power tools, self-starting and committed to producing high-quality work in a manufacturing environment. Previous experience with welding, pipe fitting, electrical installation, or industrial equipment is beneficial but not required. 2.0 Key Responsibilities • Perform automatic orbital welding of process piping systems in accordance with approved design drawings, manufacturing documents, procedures, and quality requirements., • Assemble and install piping, instruments and equipment., • Install, route, and field dress electrical cables in accordance with electrical drawings and manufacturing documentation., • Read and interpret engineering drawings, schematics, bills of materials, work instructions, and manufacturing documents., • Ability to use hand tools, power tools, measuring equipment, and fabrication equipment safely and effectively., • Assist with system integration and commissioning activities., • Support the operation and troubleshooting of systems during testing and startup., • Support the factory acceptance testing (FAT) to verify that completed systems meet design, performance, and customer specifications., • Identify and communicate issues to the manufacturing manager and engineering personnel., • Maintain accurate documentation and records related to assembly, testing, and modifications., • Maintain a clean, organized, and safe work environment., • Follow all company safety procedures, quality standards, and manufacturing processes., • Support other related duties as assigned. 3.0 Qualifications • Bachelor’s degree in engineering, science or other relevant fields., • OR minimum of five years of relevant work experience and a High School diploma /GED., • Ability to read and understand basic drawings, diagrams, and written instructions., • Ability to use basic hand and power tools., • Strong attention to detail and commitment to our quality control program., • Ability to work independently as well as effectively within a team., • Good communication and problem-solving skills., • Mechanical aptitude and ability to work in a hands-on manufacturing environment and stand for extended periods. 3.1 Preferred Qualifications • Experience with TIG/orbital welding or stainless-steel process piping., • Experience with electrical cable installation or wiring., • Experience reading mechanical or electrical schematics., • Previous manufacturing, assembly, fabrication, or industrial experience. Manufacturing Operations Assistant 1.0 Executive Summary Torion USA is seeking a motivated and detail-oriented manufacturing operations assistant. In this role, you will support the manufacturing and delivery of complex fusion fuel cycle systems by supporting the purchase of materials and components, receiving orders and tracking inventory, and the shipment of systems and components to our customers. These roles support our growth as a leader in fusion fuel cycle systems and components. The ideal candidate is self-starting, eager to learn, comfortable working with hand and power tools, and committed to producing high-quality work in a manufacturing environment. Previous experience with industrial manufacturing is beneficial but not required. 2.0 Key Responsibilities The sections below will outline the qualification requirements of each job function. The position will report to the President of the company and work closely with the Manufacturing Manager. 2.1 Purchasing • Create and process purchase orders (POs) based on inventory levels, production needs, and customer requirements., • Obtain pricing, availability, and delivery information from suppliers., • Communicate with vendors regarding orders, backorders, pricing, and delivery schedules., • Monitor open purchase orders and follow up on delayed or missing shipments., • Maintain accurate purchasing records and vendor information., • Assist with identifying cost-saving opportunities., • Maintain accurate financials for spend reporting and budget tracking., • Maintain documentation consistent with the Torion USA ISO 9001:2015 Quality System. 2.2 Receiving · Receive incoming materials, products, and supplies and verify quantities against POs and packing slips. · Inspect shipments for damage, shortages, or discrepancies. · Maintain inventory management system. · Enter received items accurately into the inventory management system. · Label, organize, and properly store incoming materials. · Inspect and certify certified material test reports (CMTRs) against the code allowances. · File CMTRs and work with Quality Assurance (QA) manager to ensure acceptance. · Report damaged, incorrect, or missing items to vendors and management. · Initiate Non-Conformance Reports (NCRs) consistent with the Torion USA ISO 9001:2015 Quality System. · Maintain accurate receiving documentation and inventory records. 2.3 Shipping • Prepare orders for shipment and verify items, quantities, and shipping information., • Inspect and ensure packaging/crating is adequate for safe transport of items., • Prepare bills of lading, packing slips, shipping labels, and other required documentation in accordance with the PO., • Schedule shipments and coordinate with freight carriers, FedEx, or other transportation providers., • Maintain accounts with freight carriers, or other transportation providers., • Track shipments and communicate delivery updates or issues., • Process returns, exchanges, and shipping discrepancies as needed. 2.4 Additional Responsibilities • Maintain organized warehouse and shipping/receiving areas., • Perform physical inventory as needed., • Investigate inventory discrepancies and make appropriate adjustments., • Follow company safety procedures and maintain a clean, organized work environment., • Provide excellent customer service., • Perform other purchasing, receiving, inventory, and shipping duties as assigned. 3.0 Qualifications • Minimum High school diploma or GED required., • Strong organizational and time-management skills., • Previous experience in purchasing, receiving, shipping, inventory, warehouse, or logistics., • Ability to communicate effectively with vendors, customers, carriers, and co-workers., • Basic computer skills and experience with Microsoft Office (Excel, Word), • Ability to prioritize multiple tasks and meet deadlines., • Ability to lift and move packages/materials as required by the position.

Job DescriptionDescription: About Us: Founded in 1997, Vuzix (NASDAQ: VUZI) is a growing, dynamic company that specializes in the design, manufacturing and sale of smart glasses and augmented reality (AR) technologies and products for the enterprise and consumer markets. Company products include wearable displays and computing devices that offer portable, high-quality viewing experience for applications in augmented reality, digital information, utility, and entertainment. Position Summary: The Mechanical & Manufacturing Engineering Co-op [Winter-2026] will be involved in the design and engineering of new wearable augmented reality devices, smart glasses, and their accessories and systems as well as working with manufacturing engineers to transition from prototype to volume manufacturing at our facility. The Coop will take part in various aspects of design and engineering of electro/mechanical/optical devices and their supporting systems, including concept work and prototyping, CAD design, testing, and general Mfg. Eng support. This position will also support the functions of the R&D – Mechanical Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties & Responsibilities: • Under the direction and guidance of a Mechanical & Manufacturing Engineering Manager and Director of Product Development, learn to provide Mechanical Engineering support for various new and existing products and accessories as well as supporting the Manufacturing Engineering efforts., • Design and modify mechanical portions of existing and future products and fixtures using SolidWorks CAD software., • Create bills of materials, drawings, supporting documentation, and manufacturing work instructions., • Collaborate with various R&D teams; Electrical, Optical, and Quality Engineering to develop robust, accurate assemblies and systems that are optimized for size, performance, and DFMA., • Analyze the tolerance stack up of complicated miniature assemblies and incorporate findings into design., • Provide Engineering support to production groups in the form of collaboration on fixture design, testing, and assembly pilots., • Design, assemble, and test prototypes and mock-ups using 3D printing and other rapid prototyping techniques., • Support manufacturing engineering by troubleshooting processes and equipment, writing work instructions, process flow improvements, and occasionally operating equipment/machinery., • Design, complete, and document assembly and product level testing using molded prototypes and early production products., • Support or conduct investigative and reliability testing to mechanical and/or thermal parts/assemblies., • Help maintain and operate equipment used in engineering such as 3D printers, tools, and test equipment., • Meets required ISO 9001:2015 standards and necessary training based on the relevant Quality Objectives. Competencies: To perform this job successfully, an individual should demonstrate the following competencies: Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences. Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations. Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals. Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position. Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment. Respect & Integrity – Treat people with respect, work ethically and with honesty and integrity, inspire the trust of others, demonstrate appreciation and sensitivity for cultural differences, help promote inclusion and understanding of the value of diversity, embrace differences and support a harassment-free environment. Requirements: Minimum Qualifications: • Actively enrolled in a degreed program preferably in Mechanical or Manufacturing Engineering, or related field., • Self-motivated and driven to learn about new tools and concepts., • Proficient in Parametric 3D CAD software such as SolidWorks., • Experience with 3D printers., • Basic hands-on mechanical proficiency. Preferred Qualifications: • Junior or Senior in degree program., • Prior related work experience or co-op/internship., • Experience in AR, VR, or MR systems., • Experience with electronic and/or optical systems. Supervisory Responsibilities: None. Travel: Negligible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable. Vuzix Corporation is an Equal Employment Opportunity (EEO) Employer. We consider applicants without regard to race, color, religion, creed, gender, national origin, age, disability, marital or veteran status, or any other legally protected status. We are committed to recruiting and employing the best talent available.

Gorbel's mission is simple: We improve people's lives. That mission guides everything we do, from the products and service we provide to our outside customers to the work environment we foster for our employees. We are a manufacturer of material handling and fall protection products for the production and warehouse/distribution sectors. We're on the cutting edge of manufacturing and distribution; a thriving, growing company that is constantly seeking out new ways to innovate and elevate our products and our processes and we're looking for people like you to join us in that mission. The Receiver/Shipper is responsible for the efficient flow of incoming materials, and the efficient preparation of outgoing materials. Through the use of various material handling equipment, ERP (Enterprise Resource Planning) systems, critical thinking, and problem solving skills. This position requires a high level of attention to detail, critical thinking, problem solving skills, and the ability to work in a fast-paced, multi-tasking environment. • Load/unload trucks of raw steel beams, non standardized and palletized loads ranging in size up to 60 foot lengths., • Utilize forklifts, cranes and hoist systems to maneuver unbalanced loads weighing in excess of 1,000 pounds and 30 feet in length throughout the facility, • Build custom skids and custom packaging as required, • Use problem solving skills to stage and palletized loads in an efficient and cost-effective manner on outbound trailers. This includes skidding, banding, wrapping and crating product in a way that saves space and time, and ensures loads are protected during transport., • Obtain, Read, Interpret, and Process Purchase Orders to ensure accuracy and prioritize resources as necessary., • Create and distribute up to date and accurate shipping logs to floor supervisors and upper management as required., • Communicate effectively with logistics and purchasing agents to ensure accuracy of invoices and to seek resolution of issues as they arise., • Inspect incoming/outgoing material for quality, dimensional accuracy, and correct quantities., • All other duties as assigned by management, • High School Diploma or equivalent required, • Must be able to pass truck and crane certification with training upon hire, • Computer knowledge of Microsoft Windows, Word, Excel, and other computer programs, • Ability to participate in minor data entry, • Ability to read tape measure, • Ability to read a blue print, • Ability to use hand tools requiring dexterity, • Must be able to communicate effectively with factory supervision, • Able to lift and/or move up to 50 pounds., • Able to stand (75%); walk (20%); stoop, kneel or crouch (5%), as required., • Ability to climb portable ladder., • Able to wear safety glasses and foot protection throughout shift., • Able to wear hearing protectors (ear plugs) throughout the shift while working in an environment with moderate noise levels. Gorbel is an Equal Opportunity Employer that does not discriminate on the basis of actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, gender, marital status, veteran status, sexual orientation, genetic information, arrest record, or any other characteristic protected by applicable federal, state or local laws. Gorbel is also committed to providing reasonable accommodations to qualified individuals so that an individual can perform their job related duties. If you are interested in applying for an employment opportunity and require special assistance or an accommodation to apply due to a disability, please contact us at 585-924-6204. The wage range for this role takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. At Gorbel, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on the facts and circumstances of each case. A reasonable estimate of the current range is: Receiver/Shipper I: Min $17.00 - Max $23.63 Receiver/Shipper II: Min $17.59 - Max $26.39 Receiver/Shipper III: Min $19.74 - Max $29.62

Job Description Elmira Stamping North is looking for a Manufacturing Associate to join our production team in Rochester, NY!This is a hands-on, entry-level manufacturing position that supports our production team in a variety of areas. The manufacturing Associate will assist machine operators, handle and sort parts, help with material movement, and perform other tasks as needed to keep production running efficiently. What You'll Do:Assist machine operators and production employees with daily manufacturing activities.Remove, shake, separate, and organize parts as they come off production equipment, including laser-cut parts.Assist with loading, unloading, sorting, and handling parts and materials.Inspect parts for obvious defects and notify the appropriate team member of any quality concerns.Count and organize completed parts.Package and prepare parts for the next stage of production or shipment.Move materials, parts, totes, and other items throughout the production area as needed.Keep work areas clean, organized, and free of debris.Assist with setup, changeovers, and other production activities as directed.Follow work instructions and established quality and safety procedures.Support different areas of production as business needs change.Perform other general manufacturing duties as assigned. What We're Looking ForManufacturing experience is helpful but not required.Willingness to learn new processes and equipment.Ability to follow instructions and work as part of a team.Good attention to detail.Ability to work at a fast pace in a production environment.Ability to communicate effectively with coworkers and supervisors.Comfortable performing repetitive tasks and working on your feet.Positive attitude and willingness to help wherever needed. Compensation & BenefitsPay: $22.00-$25.00 per hour, based on experience. Eligible employees may participate in a comprehensive benefits package that includes:Paid HolidaysPaid Time Off401(k) Retirement Plan with Company MatchMedical, Dental & Vision InsuranceEmployee Assistance Program (EAP)Company-Paid Life Insurance& More!

Job DescriptionUV Machine Operator – Temp-to-Hire Location: Rochester, NY Pay: $17.00–$18.00/hr, based on experience and shift Job Type: Full-Time, Temp-to-Hire Interview: On-site interview required Kelly Services is hiring UV Machine Operators for a busy printing production facility in Rochester. This is an entry-level opportunity with training and potential for permanent employment. Shift Options A Shift: • Monday–Friday: 5:30 AM–2:00 PM, • Peak season mandatory Overtime -Sunday-7:00 AM–3:30 PM B Shift: • Monday–Tuesday: 10:00 AM–8:30 PM and Wednesday–Friday: 10:00 AM–6:30 PM, • Peak season mandatory Overtime -Sunday-7:00 AM–3:30 PM What You'll Do • Assist with UV machine and production operations, • Follow written and verbal work instructions, • Perform quality checks and verify materials, • Assist with labeling, collation, binning, QC and shipping as needed, • Maintain a clean and safe work area, • Report production issues to supervisors, • Follow safety and production proceduresWhat We're Looking For, • High school diploma or equivalent, • Strong attention to detail, • Reliable and punctual, • Able to work in a fast-paced environment, • Willingness to learn and work as part of a team, • Manufacturing, printing or production experience preferred, but not required, • Ability to lift, push and pull up to 50 lbs., • Must be available for overtime, weekends and holidays during peak season Why Apply? • Temp-to-Hire opportunity, • Weekly pay through Kelly Services, • Training provided, • Opportunity for permanent employment, • Gain valuable production experience Ready to get started? Apply now! Qualified candidates will be contacted to discuss the opportunity and next steps. As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Please note: The following benefits reflect Kelly's general offerings. Eligibility may vary by assignment, location, and job type. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job DescriptionProduction Machine Operator – Cutter Location: Rochester, NY Pay: $17.00–$18.00/hr, based on experience and shift Job Type: Full-Time | Temp-to-Hire No Previous Printing Experience Required! Kelly Services is hiring Production Machine Operators – Cutters for a busy printing production facility in Rochester. This is an entry-level opportunity with training provided, making it a great opportunity for candidates looking to build manufacturing and machine operation experience. Previous manufacturing, production, warehouse, packaging, or machine operation experience is helpful but not required. B Shift Schedule • Monday–Tuesday: 10:00 AM–8:30 PM, • Wednesday–Friday: 10:00 AM–6:30 PM, • Mandatory Peak Season Overtime: Sunday, 7:00 AM–3:30 PMImportant: During peak season, the schedule may change to a standard 3:00 PM–11:30 PM, Sunday–Thursday schedule. Additional overtime, weekends, and holidays may be required during peak production periods. Great ways to earn extra cash! What You'll Do • Operate cutting equipment to trim printed materials according to specifications, • Set up cutting programs based on job requirements, • Inspect materials for accurate measurements, alignment, and cut quality, • Monitor equipment and report production issues, • Maintain a clean, organized, and safe work area, • Assist with other production tasks as needed, • Follow safety and production proceduresWhat We're Looking For:, • Reliable attendance and transportation, • Strong attention to detail and accuracy, • Ability to follow written and verbal instructions, • Comfortable working in a fast-paced production environment, • Willingness to learn new equipment and processes, • Previous manufacturing, printing, production, warehouse, or machine operation experience is a plus, but not required, • Ability to lift, push, and pull up to 50 lbs., • Must be available for mandatory peak-season overtime, including Sundays, weekends, and holidays as requiredWhy Apply?, • $17.00–$18.00/hr, • Weekly pay through Kelly Services, • Training provided, • No previous printing experience required, • Temp-to-hire opportunity, • Opportunity for permanent employment, • Learn valuable machine operation and production skills Ready to get started? Apply today! Qualified candidates will be contacted to discuss the opportunity, schedule, and next steps. Hablamos Español. As part of our promise to talent, Kelly supports those who work with us through a variety of benefits, perks, and work-related resources. Please note: The following benefits reflect Kelly's general offerings. Eligibility may vary by assignment, location, and job type. Kelly offers eligible employees voluntary benefit plans including medical, dental, vision, telemedicine, term life, whole life, accident insurance, critical illness, a legal plan, and short-term disability. As a Kelly employee, you will have access to a retirement savings plan, service bonus and holiday pay plans (earn up to eight paid holidays per benefit year), and a transit spending account. In addition, employees are entitled to earn paid sick leave under the applicable state or local plan. Click here for more information on benefits and perks that may be available to you as a member of the Kelly Talent Community. Get a complete career fit with Kelly®. You’re looking to keep your career moving onward and upward, and we’re here to help you do just that. Our staffing experts connect you with top companies for opportunities where you can learn, grow, and thrive. Jobs that fit your skills and experience, and most importantly, fit right on your path of where you want to go in your career. About Kelly Work changes everything. And at Kelly, we’re obsessed with where it can take you. To us, it’s about more than simply accepting your next job opportunity. It’s the fuel that powers every next step of your life. It’s the ripple effect that changes and improves everything for your family, your community, and the world. Which is why, here at Kelly, we are dedicated to providing you with limitless opportunities to enrich your life-just ask the 300,000 people we employ each year. Kelly is committed to providing equal employment opportunities to all qualified employees and applicants regardless of race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or any other legally protected status, and we take affirmative action to recruit, employ, and advance qualified individuals with disabilities and protected veterans in the workforce. Requests for accommodation related to our application process can be directed to the Kelly Human Resource Knowledge Center. Kelly complies with the requirements of California’s state and local Fair Chance laws. A conviction does not automatically bar individuals from employment. Kelly participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Kelly may use AI-powered tools during the recruitment and hiring process. For full details, including how Kelly uses AI, your rights, and how to request a reasonable accommodation, visit the Recruitment Artificial Intelligence Notice.

Job Description Sales & Customer Support Specialist - Thread Rolling Solutions Team Brinkman Products - CJWinter Division Location: Rochester, NY Job Type: Full-Time Salary Range: $55,000 - $85,000 annually, based on experience About Brinkman Products Brinkman Products, Inc. is an industrial manufacturing company encompassing two specialized divisions: Davenport Machine and CJWinter. Together, we manufacture proprietary product lines including Davenport multi-spindle screw machines, thread rolling attachments, thread rolls, and precision tooling solutions serving manufacturers worldwide. We are seeking a motivated and detail-oriented Sales & Customer Support Specialist to join our CJWinter Thread Rolling Solutions Team. This position is ideal for an individual with strong technical aptitude and a customer-focused mindset who enjoys working with manufacturing products, supporting customers, processing orders, and helping deliver practical solutions to real-world production challenges. This role serves as a key link between customers, sales engineers, engineering, manufacturing, and shipping teams to ensure accurate quoting, efficient order processing, timely delivery, and exceptional customer support. What You'll Do As part of the Thread Rolling Solutions Team, you will help customers receive the right products, technical support, and timely service while supporting the sales and operational functions of the business. Key Responsibilities • Prepare quotations and process orders for thread rolling attachments, thread rolls, tooling, spare parts, and related products., • Review customer drawings, specifications, and application information to ensure accurate quotations, order entry, and product selection., • Serve as a primary customer contact for quotations, order status, lead times, shipping schedules, product availability, and basic technical inquiries., • Coordinate closely with engineering, manufacturing, sales, and purchasing teams to ensure customer requirements, delivery dates, and product specifications are clearly understood and executed., • Work with shipping personnel and freight providers to coordinate domestic and international shipments, prepare required documentation, and ensure on-time delivery of customer orders., • Support outside sales engineers by preparing quotations, technical documentation, proposals, and customer follow-up activities., • Maintain accurate customer, quotation, and order information within CRM and ERP systems while tracking open quotes and supporting sales growth initiatives., • Assist in resolving customer issues related to orders, shipments, delivery schedules, product specifications, and returns while maintaining a high level of customer satisfaction., • Support trade shows, customer visits, sales initiatives, and continuous improvement efforts that enhance customer service and operational efficiency. What We're Looking For Education & Experience • Associate degree, technical certification, business degree, or equivalent work experience preferred., • 2-5 years of experience in customer service, inside sales, order entry, sales support, manufacturing, industrial distribution, or a related environment., • Experience supporting technical products and manufacturing customers is preferred. Technical Qualifications • Strong mechanical aptitude and interest in manufacturing products and processes., • Ability to read and interpret basic engineering drawings and specifications preferred., • Familiarity with machining, tooling, industrial equipment, fasteners, or manufacturing environments is a plus., • Experience with ERP systems, CRM software, and Microsoft Office applications., • Strong attention to detail and accuracy when preparing quotations, entering orders, and coordinating shipments. Professional Skills • Excellent communication and customer service skills., • Strong organizational, multitasking, and time-management abilities., • Ability to manage multiple priorities in a fast-paced environment., • Problem-solving mindset with a willingness to learn technical products and applications., • Ability to work effectively with customers, freight providers, and cross-functional teams., • Positive attitude and commitment to delivering an exceptional customer experience. Why This Role Appeals to Candidates Customer Impact Play a direct role in supporting customers and ensuring a positive experience from quotation through delivery. Technical Exposure Learn about advanced manufacturing processes, precision tooling, and thread rolling technology without requiring an engineering degree. Career Growth Develop expertise in industrial products, inside sales, customer support, manufacturing operations, and international business. Variety Work with customers, products, and applications across a wide range of industries while coordinating sales, operations, and logistics activities. Team Environment Collaborate with experienced sales, engineering, manufacturing, and customer support professionals in a highly supportive environment. Stability Join a well-established manufacturing company with proprietary products and a strong reputation in the industry. Benefits & Compensation • Competitive salary based on experience, • Industry-leading medical, dental, and vision insurance, • Employer-funded Health Savings Account (HSA), • 401(k) retirement plan with company matching contributions, • Generous paid time off plus 10 paid holidays annually, • Professional development and training opportunities, • Collaborative, team-oriented culture that promotes continuous learning and growth Join Our Team If you enjoy working with customers, supporting technical products, coordinating orders, shipments, and logistics, and helping ensure a smooth customer experience from quotation through delivery, we'd like to hear from you. Join Brinkman Products and become an important part of our growing Thread Rolling Solutions Team. EOE, including disability/vets. Job Posted by ApplicantPro

Job Description Job Type: Full-time Job Location: Rochester, NY Pay: $25.00 - $35.00 per hour based on experience Supplemental Pay: • Overtime pay, • Performance bonus Schedule: • Extended hours, • Monday to Friday, • On call ACT Power Services was created to provide industry leading services for our clients. As an independent service provider, we avoid conflicts of interest and maintain a complete focus on our clients' needs. We have taken a no-frills approach to developing our organization to ensure our clients are only paying for services that add value. ACT then leverages a world-class team, state of the art technology, and best-in-class operating practices to ensure every facility is operated in a manner that maximizes production, preserves compliance, and ensures the safety of our personnel and communities. Our vision is to reshape the industry's benchmark for renewable operations and create the next generation of O&M provider. The Field Service Technician is and entry-level position responsible for the safe, productive repairs and maintenance of Commercial and Utility Scale Solar PV plants. From performing preventative maintenance and inspections, to troubleshooting and making repairs to maximize production, the Solar Maintenance Technician gets to exercise a verity of skill sets and has constant opportunities to learn more. All while making an impact on our safe, reliable, clean energy future. This role will encompass performing the preventative and corrective maintenance on the solar modules, strings, trackers, and inverters. Responsibilities • Uphold a high level of safety standards in everything that you do, • Conducting routine preventive maintenance, service, troubleshooting and repair of solar photovoltaic facilities, • Willingness to learn the NEC code, electrical theory, and industry best practices, • DC and AC testing included but not limited to polarity, open circuit voltage, grounding continuity, communication, insulation resistance testing, I-V curve tracing, • Interpret schematics to understand system layouts and connections, • Maintain a schedule for routine maintenance, service, trouble shooting and repair of equipment at solar photovoltaic facilities including but not limited to: Single Axis trackers, Central or String Inverters, Transformers, AC and DC disconnects, Substation equipment, • Maintaining company property such as vehicle, tools, meters and plant stock, • Maintaining service reports, inspection documentation, safety paperwork, and spare parts inventory, • Provide maintenance and troubleshooting training to technicians and others as needed, • Identify safety hazards and take appropriate action to remove or eliminate hazards Qualification Requirements • Familiarity with electrical systems and components, • Proficiency in using power tools for repair tasks, • Ability to read and interpret schematics accurately, • Proficiency with MS Office suite, • Ability to take direction and complete tasks with minimal oversight, • Valid Driver's License, • Working knowledge and experience operating under OSHA 1910, NFPA 70E, and 70B, • OSHA 10 General Industry certificate, • Must have the ability to travel, work on-call during off-shift hours and weekends Physical Requirements/Work Environment: • Work is to be performed outdoors at various job sites., • Must be able to comply with all safety standards and procedures. PPE personal protective equipment is required., • Must have the ability to sit, stoop, kneel, bend, stand, or walk for 8-10 hours a day., • Must be able to lift, push, or pull up to 50 pounds on an occasional basis Benefits: • 401(k) with employer match, • Health Insurance, • Dental Insurance, • Vision Insurance, • Flexible Spending Account, • Health Savings Account, • Short-term and Long-term disability, • Critical illness, • Paid Time Off, • Parental Leave, • Paid Holidays, • Employee assistance program, • Life insurance, • Opportunities for advancement, • Training and Development, • Legal and Identity Theft, • Company vehicle opportunities, • Pet Insurance Act Power Services does not accept any unsolicited resumes or referrals from any third-party recruiting firms or agencies.

Job Description Job Summary: Create, deliver, and maintain the production schedule and distribute plans to Operations Management. Execute, track and maintain advanced resource planning (ARP) process to ensure all scheduled jobs are ready to hit the floor and be completed per the prescribed time constraints cited within the production schedule. Maintain job progress accuracy and identify gaps between the production schedule and the reality of the shop floor - update schedule in real time. Ensure orders are through the operations area and “on-time” to meet customer delivery dates. Using feedback from past performance, improve project scheduling and planning to increase accuracy and OTD. Essential Duties and Responsibilities: SCHEDULING · Provide Sales & Customer Service with firm delivery dates from production schedule. · In Conjunction with Sales & Customer service, monitor scheduled start and progress of all jobs using the ERP system. · In conjunction with Sales & Customer service and Customer Service, monitor the flow of blanket orders (stock jobs) through the shop. · Continually update schedule to reflect possible re-routing or change in flow. · In Conjunction with Sales & Customer service, expedite orders as needed to meet customer deliveries. · Work with purchasing department as production schedule is updated – ensure expected dates for incoming goods are adjusted to properly coincide with the production schedule. · Review outsourced operations within jobs and ensure that PO timing for these services align with successful project delivery. · Serve as liaison between sales demand and operational capacity, ensuring optimization of resources while meeting customer expectations. PLANNING · Ensure all steps in ARP process are completed before job is released to operations. · Plan larger projects (blanket orders) to achieve increased efficiency and lower costs. · Determine when/if OT needed to recover or maintain production workload notify operations manager and general manager in advance. · Monitor scheduled start and end dates of all jobs utilizing the ERP scheduling module and provide weekly status updates on monthly progress. · Review quotes for incoming jobs as needed. Check for alignment on lead times to assist in setting proper customer expectations. · Recommend outsourcing jobs as needed to optimize shop floor activities and overall company output in a cost-effective manner. Additional Responsibilities: · Uses ERP system to retrieve customer information, stock status information, the status of purchase orders’ and recommend changes on customer purchase orders. · Perform cycle counts of raw materials, WIP and finished goods as needed to successfully monitor needs of each scheduled job. · Adjust time tickets to reflect discrepancies discovered in the course of monitoring jobs & the scheduling module. · Assist in annual physical inventory. · Complete special projects as requested. Physical Demands and Work Environment The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee must also occasionally lift and/or move up to 50 pounds. Employee must have the ability to solve practical problems, and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: · Bachelor’s degree in supply chain management, business administration, or a related field is preferred. · 1-5 years of experience in production scheduling, planning, or a related role in a manufacturing environment required. · Basic arithmetic skills and attention to details is required. · Ability to use Excel, Word, Outlook and Power Point. · Solid knowledge of manufacturing process from receipt of material to shipment of parts. · Familiar with MRP or ERP Order Entry, Shipping, Purchasing and Receiving (JobBoss2 preferred). · Good communication skills. · Must be a good team player.

Job Description Title Inspector Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in Rochester, RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Position Overview: The Coating Inspector is responsible for inspecting and verifying optical coatings on precision components to ensure compliance with performance, durability, and visual standards. This role supports production by identifying defects, confirming coating quality, and ensuring products meet customer and internal requirements before release. Work involves handling sensitive optical components, performing visual and measurement-based inspections, and following established processes. The position is designed as an entry-level role with structured, on-the-job training in optical handling, cleaning, inspection methods, and coating processes. Success in this role requires strong attention to detail, the ability to follow defined procedures, and consistent focus during visual inspection tasks. Key Responsibilities: • Inspect coated optical components for defects such as scratches, pinholes, coating irregularities, and contamination using microscopes and visual inspection methods., • Perform basic measurements and verification of coating characteristics (e.g., thickness, reflectance, transmittance) using standard equipment., • Compare inspection results against established specifications and identify nonconforming conditions., • Accurately document inspection results and maintain quality records in accordance with internal procedures., • Handle and clean optical components in accordance with established processes to prevent contamination or damage., • Communicate inspection findings and escalate quality concerns to management or engineering as needed. Required Skills & Qualifications: • High school diploma or GED required; Associate degree or technical training in a related field is beneficial., • 1–3 years of experience in a manufacturing or production environment, with exposure to inspection, quality checks, or other detail-oriented processes., • Ability to follow detailed work instructions and accurately document results., • Strong attention to detail and ability to perform repetitive inspection tasks with consistency., • Ability to communicate clearly with team members and supervisors regarding quality issues., • Experience in optical inspection, thin film coating or working with precision components is beneficial. Core Competencies: • Results-Oriented: Motivated, hard-working and ready to level-up., • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge., • Process Oriented: Well organized, demonstrating attention to detail., • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude., • Accountable: Demanding the highest quality from yourself and team members., • Detail-Oriented: Have excellent time management and organizational skills., • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. Additional Requirements: Pursuant to ITAR, EAR, and other export compliance laws and regulations, applicants for this position must be U.S. Persons as defined by U.S. law, i.e., U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty. Compensation & Benefits: • Competitive compensation package linked to your experience and performance., • 401(k) with company match and Tuition Reimbursement opportunities., • Health, dental, vision, HSA, & life insurance., • Paid time off including vacation, sick time, and 11 paid company holidays Environment & Physical Demands: • Work is performed in a controlled manufacturing environment requiring adherence to contamination control practices, including the use of protective garments such as frocks and hair coverings., • Requires use of appropriate personal protective equipment, including safety glasses and cleanroom garments., • Position involves a combination of standing, walking, and sitting for extended periods, along with occasional stooping, kneeling, and reaching., • Frequent use of hands for handling and inspecting small components requiring fine motor coordination and dexterity., • Sustained visual focus is required, including close-up and magnified work, with the ability to identify fine details and adjust as needed., • Regular use of computers and standard assembly or inspection tools, • Ability to lift up to 50 lbs. as needed., • Work may shift between stations and may require schedule flexibility, including overtime or weekend work based on production needs. Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Race/Gender/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. This role offers scheduling options on B Shift (Monday–Friday, 2:00 PM–10:30 PM) Before moving to either off‑shift, new hires will complete 2–4 weeks of onboarding and training on A Shift to ensure full readiness.