Trabajos Engineering en Rochester, New YorkCrear alertas

Job DescriptionDescription: General Job Summary: • Develops welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred., • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification., • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding., • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements., • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Is authorized to interrupt any welding process found out of compliance with established WPS., • Will immediately inform the area supervisor of the non-conformance and production interruption., • Production will resume after the Welding Coordinator approves the corrected process., • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organization’s safety, quality, operational performance, customer satisfaction, and overall financial health of the company. Supervisory Responsibilities: None Requirements: Education Associate’s degree (A.A.) Bachelor’s degree (B.A.) preferred or equivalent combination of education and experience. Experience 3-5 years metal fabrication experience Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, Internet Explorer, Design software, and CAD software including: solidworks, Autocad, ProE and others. Other Requirements: • Good communication skills with the ability to develop reports and verbally communicate with different, • levels inside and outside the organization., • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point. High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to stand, walk, sit, maneuver through the office and factory, talk or hear, and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. While performing the duties of this job the noise level in the work environment is usually moderate.

Job DescriptionJob Overview: We are seeking a highly motivated and skilled Welding Engineer to join our team. We are looking for individuals that will be responsible for developing welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals, utilizing knowledge of production specifications, properties and characteristics of metals and metal alloys, and engineering principles: Conducts research and development investigations to develop and test new fabrication processes and procedures, improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures. Key Responsibilities: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Develop weld profiles and processes that are appropriate for the materials and application of the product., • Design fixtures required for welding and fabrication using Solidworks models and drawings., • Develops and monitors processes to meet ASME Codes including analyzing weld coupons and creating reports. CWI certification preferred. • Write and maintain Welding Procedure Standards (WPS) for general and specific welding applications., • Direct and coordinate technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with code requirements; or testing welding personnel for certification. • Proficient in implementing MIG, TIG and Resistance Welding processes, and is familiar with welding equipment and consumables used in production welding. • The Welding Engineer is responsible for supporting and troubleshooting welding manufacturing processes, optimizing production capabilities and driving welding improvements. • Observe and monitor weld processes for conformance to established WPS as Welding Coordinator, • Possess a general knowledge of Metal fabrication processes, techniques, and engineering including but not limited to CNC blanking, press brakes, stamping, machining, and finishing processes., • Collaborate and communicate across cross functional departments while applying knowledge and experience to innovate and improve welding processes used to manufacture products., • Explore new welding technologies that can be applied to improve Productivity and Quality and facilitate entry into new markets or provides a competitive advantage., • Apply problem-solving skills with an analytical approach and attention to detail. Directs data collection for analysis of weld processes., • Promote and adopt the continuous improvement culture by focusing on problem solving to drive improvements in the organizations safety, quality, operational performance, customer satisfaction, and overall financial health of the company.Qualifications:, • Experience in welding process development, • Experience in use of robotics. Computer Skills: To perform this job successfully, an individual should have knowledge and proficiency in the use of Microsoft Word, Microsoft Excel, Outlook, and Solidworks. Experience with robotic programming. * Other Requirements: To perform this job successfully, an individual must have the ability to read blueprints, knowledge of business practices/protocols, and be able to maintain confidential information. * Good communication skills with the ability to develop reports and verbally communicate with different levels inside and outside the organization. * • Ability to work effectively and efficiently independently, cross functionally, or part of a team., • Ability to be effective working with shop floor employees and to adjust work schedule at times if needed., • Ability to handle a variety of assignments and changing priorities., • Good computer skills with proficiency in Microsoft Excel, Word, and Power Point., • Experience with MRP software, PLEX preferred. Language Skills: High Skills: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. * Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. * Reasoning Ability: High Skills: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. * Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the Associate is regularly required to walk, sit, use of computer keyboard, maneuver through the office and factory, use a 10-key calculator, and communicate with customer and management in person, by email or via telephone, and the Associate is occasionally required to lift and/or move up to 50 pounds. * PPE: Must wear safety glasses with side shields and steel toe/composite shoes while on the production floor. Gloves may be required if handling parts. * Work Environment: The work environment characteristics described here are representative of those an Associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. Hours: • Full Time - 40 hours per week, • Monday - FridayBenefits:, • Competitive salary and benefits package., • Opportunity to work in a dynamic and innovative environment., • Professional growth and development opportunities., • Collaborative and supportive work culture.Contact Us:

Key Responsibilities: Lead bridge design efforts, including load rating, structural analysis, and foundation design Prepare comprehensive design plans, technical specifications, reports, and cost estimates Provide technical guidance during construction, including responding to contractor questions a

Key Responsibilities: Develop preliminary and final engineering plans for highway construction and improvement projects Design roadway elements including alignments, grading, drainage systems, and traffic-related features Provide technical guidance to junior team members and review design work for a

A client of Innova Solutions is immediately hiring an Engineering Technician. Position Type: Full time, Contract to Hire Duration: 12months Location: Rochester, NY 14606 (Onsite/1st Shift) As an Engineering technician you will Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Assists in the design, construction, test and check-out of test equipment. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems. Works from schematics, operating or repair manuals, engineering drawings and written or verbal instructions. May work with complex machines or computer systems. Operates related equipment; conducts tests and reports data in prescribed format. Performs calibration and alignment checks; makes adjustments, modifications, and replacements as directed; prepares prescribed compounds and solutions. Overall Summary: Developing support individual contributor. Works under general supervision. Work is less structured within identified boundaries and procedures. Identifies problems and issues in straightforward situations. Education & Experience: High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates Degree with 0 to 2 years of prior related experience. Thanks & Regards Qualified candidates should APPLY NOW for immediate consideration! Please hit APPLY to provide the required information, and we will be back in touch as soon as possible. We are currently interviewing to fill this and other similar positions. If this role is not a fit for you, we do offer a referral bonus program for referrals that we successfully place with our clients, subject to program guidelines. ASK ME HOW. Thank you! Ankur Mishra (+1) 213-929-5189 PAY RANGE AND BENEFITS: Pay Range*: $25-$30 per hour. *Pay range offered to a successful candidate will be based on several factors, including the candidate's education, work experience, work location, specific job duties, certifications, etc. Benefits: Innova Solutions offers benefits( based on eligibility) that include the following: Medical & pharmacy coverage, Dental/vision insurance, 401(k), Health saving account (HSA) and Flexible spending account (FSA), Life Insurance, Pet Insurance, Short term and Long term Disability, Accident & Critical illness coverage, Pre-paid legal & ID theft protection, Sick time, and other types of paid leaves (as required by law), Employee Assistance Program (EAP). ABOUT INNOVA SOLUTIONS: Founded in 1998 and headquartered in Atlanta, Georgia, Innova Solutions employs approximately 50,000 professionals worldwide and reports an annual revenue approaching $3 Billion. Through our global delivery centers across North America, Asia, and Europe, we deliver strategic technology and business transformation solutions to our clients, enabling them to operate as leaders within their fields. Recent Recognitions: Named One of America’s Best Employers for New Grads by Forbes (2024 Named One of the Best Companies to Work for by U.S. News & World Report (Private Companies List, 2024-2025) One of the Largest IT Staffing Firms in the US – Ranked #3 by Staffing Industry Analysts (SIA, 2024) One of the Largest Staffing Firms in the US – Ranked #13 by Staffing Industry Analysts (SIA, 2024; includes Innova Solutions, Volt, & HireGenics) Named One of the Top Ten Private Companies in Atlanta by the Atlanta Business Chronicle (2023) One of the Largest Certified Minority Business Enterprises (MBEs) in the United States (NMSDC, 2024) AWS Advanced Tier Services Partner with 100+ certifications Website: Innova Solutions offers a referral bonus for qualified Ambassadors who refer eligible referrals. Submit referrals at and earn $250-$1,000 per referral. Innova Solutions is an Equal Opportunity Employer and prohibits any kind of unlawful discrimination and harassment. Innova Solutions is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment on the basis of race, color, religion or belief, national origin, citizenship, social or ethnic origin, sex, age, physical or mental disability, veteran status, marital status, domestic partner status, sexual orientation, or any other status protected by the statutes, rules, and regulations in the locations where it operates. If you are an individual with a disability and need a reasonable accommodation to assist with your job search or application for employment, please contact us at or (770) 493-5588. Please indicate the specifics of the assistance needed. Innova Solutions encourages all interested and qualified candidates to apply for employment opportunities. Innova Solutions (HireGenics/Volt) does not discriminate against applicants based on citizenship status, immigration status, or national origin, in accordance with 8 U.S.C. § 1324b. The company will consider for employment qualified applicants with arrest and conviction records in a manner that complies with the San Francisco Fair Chance Ordinance, the Los Angeles Fair Chance Initiative for Hiring Ordinance, and other applicable laws

Job Description We are currently hiring a Project Architect in our Architectural division at our Rochester, NY office. The Architectural Division at LaBella provides comprehensive planning and design services for a wide variety of markets, including State Corrections, Healthcare, K-12 and Higher Education, Residential, Commercial, and Municipal. The overall expectations of the Project Architect position are to work with large project teams, including outside subconsultants, to ensure that all aspects of the project are being met and completed. An individual in this position needs to be capable of delegating aspects of work to the Project Technician and coordinating with all other disciplines. The Project Architect will assist the Project Manager with client meetings, design team meetings, and construction administration. In addition, the Project Architect must be motivated and capable of performing all duties with minimal guidance. A successful candidate will be self-motivated with the ability to lead, communicate, coordinate, and motivate. A successful candidate will also possess strong interpersonal, collaboration, and organizational skills, as well as contribute to a positive work environment. Requirements • Bachelor’s or Master’s degree in Architecture, • Registered Architect in the state of New York (desirable but not required), • 6-10+ years of experience, • Prior experience working with NYS OGS and/or other government agencies (desirable but not required), • Have thorough knowledge and understanding of New York State building codes, • Strong technical design and construction document skills, • Well-developed project design and planning skills, • Excellent graphic presentation skills, • CAD experience. (AutoCAD and Revit), • Microsoft Office (Word, Excel, Outlook, MS Project) Salary Range: $70,000 - $90,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events LaBella is committed to facilitating a culture where diversity, equity, and inclusion are respected, valued, and celebrated by implementing thoughtful, practical, and innovative strategies that support our employees and serve the communities in which we reside. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. LaBella Associates does not accept unsolicited resumes from recruiting professionals or agencies, nor do we accept resumes from any source that does not reference a specific, open position. LaBella Associates will not be responsible for any fees arising from the use of resume submitted by recruiting professionals or agencies that do not have a current placement fee agreement with LaBella Associates. All initial communication with recruiting professionals or agencies must go through human resources.

Job Description Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: • Paid Time Off & Holidays, • 401(k) with employer match, • Medical/Dental/Vision insurance, • Health Savings Account (HSA) and Flexible Spending Account (FSA), • HSA employer contribution, • Life and Disability insurance, • Wellness Program (participation incentives), • Employee Assistance Program, • Competitive pay The ideal candidate will have the ability to review specifications and contract drawings for assigned projects, ensuring alignment with project requirements. They will create accurate drawings for HVAC control systems and schematics using AutoCAD or Visio/Smartware. Responsibilities include sizing control valves, dampers, and airflow stations for HVAC systems, as applicable, and writing and interpreting sequences of operations for these systems. The role also involves performing voltage calculations for fire alarm systems and understanding system operations for protective systems, as required. Attention to detail and technical accuracy are critical for ensuring successful project outcomes. What are we looking for • Associate degree in Mechanical Engineering/Mechanical Engineering Technology or equivalent experience., • Three (3) years of related experience required., • Experience with AutoCAD, Microsoft Office suite, Adobe., • Technical background in electrical circuits, HVAC and controls required., • Ability to work independently and as part of a team., • Ability to organize work and pay close attention to details., • Bachelor's degree. Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us. The advertised compensation range for this position represents what we believe, at the time of posting, to be competitive and acceptable by reviewing comprehensive market data to include industry, and roles of similar responsibility and level. Within the range, wage will be determined by several factors including candidate knowledge, job-related skills, experience, and relevant education or training. Job Posted by ApplicantPro

Job Description We are currently looking for a Protection and Control Engineer with a minimum of 5 years of experience in protection and control system design, cost estimating, and bidding document preparation for commercial, industrial, generation and renewables. Typical system voltage levels range from 138 kV to 2.4kV. This position can be filled in any of our New York offices. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. This role can accelerate your career goals through immediate opportunities to lead, and comes with a competitive starting salary, incentive compensation, a comprehensive benefit package, and opportunities to become a LaBella shareholder. Duties • Design projects working directly with clients to develop project scope, identify problems, and propose solutions., • Typical requirements include Protection and Control drawings and documentations (relay one-lines, three-lines, AC/DC schematics, I/O lists, and relay settings, configuration files and etc), panel construction specifications (panel and interconnect wiring as well as panel layouts and elevations), and other supporting documentation., • Comfortable evaluating the interoperability, control features, and communication/protocol aspects of protective relays, RTU’s, LTC Controllers, and other equipment as well as perform power system load flow studies, fault studies, relay setting coordination., • Aid in commissioning as needed pertaining to system startups and functional checks. Salary Range: $90,000 - $135,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • A BS in Electrical Engineering or Electrical Engineering Technology., • 5 or more years of experience in protection and control system design, cost estimating, and bidding document preparation for electrical transmission and distribution substations projects., • A PE license from a US State is desired but not required., • Successful track record designing Protection and Control Systems., • Knowledge of Institute of Electrical and Electronic Engineers (IEEE), NERC, NEC, NESC, NEMA, and ANSI standards are used in designing substation is critical., • Experience with telecommunications, protective relaying, and automation (SCADA) is required., • Interest in low voltage coordination and arc flash studies. Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description At the C&S Companies, we believe work environment, culture, and the opportunity to learn and grow are key elements when considering a new job. We are just the right size to provide the resources and support you need without the burdensome bureaucracy of a large corporate environment. To that end, we foster a family-friendly and supportive workplace; collaborative and employee-focused with an emphasis on quality, integrity, trust, fun, and accountability. Diversity, equity, inclusion, and belonging are a top priority at C&S. We promote personal and professional growth by cultivating and sustaining a safe, inclusive atmosphere where everyone feels a sense of belonging. By encouraging employees to bring their whole selves to work, we create a diverse and equitable environment where all our voices are heard. Position Overview C&S is seeking an Electrical Project Engineer to join our Infrastructure Team as part of our Education, Healthcare and Public Facilities Group. The successful candidate will have experience in the design of medium and low voltage electrical systems for buildings, utilities, industrial, campus and facilities. The position will require working on and leading teams for designs of various projects. Candidate will have the opportunity to lead in the growth of the MEP development of staff and provide business opportunities for future projects. This position can be based in our Syracuse, Rochester, Buffalo or Albany office. Relocation assistance available to qualified candidates. Minimal travel estimated under 15%. Position Responsibilities • Ability to motivate and mentor junior staff., • Project management, communication and multi-tasking skills., • Ability to work with internal and external staff on an individual and team basis., • Ability to challenge one’s self and broaden knowledge base., • Bachelor's of Science or Technology in Electrical Engineering, • 5-10 years of related experience, • PE preferred, FE required, • Experience with the National Electric Code., • Experience with Power Systems Analysis, including Short Circuit, Coordination and Arc Flash., • Experience with the layout and design of low voltage building distribution systems. *Actual compensation may vary based on related work experience, geographical location and market conditions, education/training, certifications, and other credentials, as well as applicable knowledge and skills. Learn about our comprehensive Benefits WHO WE ARE: C&S Companies is a national planning, design, and construction firm with more than 600 employees and growing. For more than 50 years we have been delivering critical infrastructure design, planning and construction services in aviation, civil/site infrastructure, construction and program management, construction/design-build, energy, environmental, facilities, architecture, planning, sustainability, and transportation. We have offices throughout New York State, California, Florida, Michigan, Arizona, Pennsylvania, Ohio, Washington, and Kentucky.

Job Description Quality Engineer Contract 100% On Site 3-6+ Months Hours are 7am-4pm M-F The Quality Engineer (QE) will support Engineering Validation Testing (EVT) for spacecraft involving Thermal Vacuum, Dynamic, Propulsion, and EMI testing. This role includes off-shift, weekend, and potential overtime work to accommodate 24/7 test operations. Key Responsibilities: Ensure adherence to applicable procedures and Customer contract requirements during the EVT campaign. Support pre-test meetings by verifying test setup configuration, test equipment calibration is current, and flight software versions are current. Support post-test meetings by verifying all signoffs are complete, all requirements have been met, and all test flags or nonconformances dispositioned appropriately. Document and facilitate timely disposition of nonconformances (NCs) and test flags through TIPQA/JIRA systems. Support operational tasks including solar array integration and testing, installations, bus movements, and other activities. Participate in daily planning and update meetings with Customer for communication of quality issues and resource needs. Collaborate with Test Engineering, Systems Engineering, and QE team to resolve issues and ensure smooth test execution. Facilitate cross-functional Root Cause Corrective Actions (RCCA) as needed. Requirements: Bachelor’s Degree in Engineering and three years’ experience in Quality Engineering, preferably in Aerospace. Experience with industry quality standards (AS9100/ISO9001 preferred), Quality Management System (QMS) Procedures, and Customer contract requirements. • Strong RCCA facilitation experience., • Strong written and verbal communication skills including technical presentation skills., • Experience with Engineering Validation Testing strongly preferred.

Job Description Job summary: To provide engineering and development support to ensure the most economical and feasible methods are utilized for each project. Responsible for collaborating with manufacturing, quality and engineering departments in developing appropriate quality and manufacturing practices and documentation to meet and exceed customer expectations. Essential Duties and Responsibilities: • Consults with Process Engineer and Chief Manufacturing Engineer regarding part quality requirements., • Assists with work instructions, quality plans and appropriate training documents for manufacturing and quality departments., • May consult with customer’s technical personnel regarding current and upcoming projects or concepts., • Assists with preparation of accurate cost analysis of projects and forecasts accurate delivery times for quotation process., • Able to make decisions on new production quotes and expansion of product lines for customers., • Consult with Chief Manufacturing Engineer to improve throughput, profit margins, and efficiency in manufacturing., • Works with manufacturing, quality, and engineering to reduce non-conforming material., • Provide engineering support and input to departments within company., • Assists manufacturing department in development of processes for production., • Authority to cease or allow production on parts that do not meet specs., • Performs product/process analysis for cost reduction, quality improvement, and improved efficiency, and makes recommendations., • May represent Manufacturing/Management Department on cross-function teams., • When requested, may work on special projects and various related assignments. While performing the duties of this job, the employee is regularly required to sit, talk and/or hear. The employee is frequently required to use hands to finger, handle or feel. Must be able to stand for long periods of time. The employee is occasionally required to reach with hands and arms. The employee is required to climb or balance, stoop, kneel, crouch and/or crawl. The employee must also occasionally lift and/or move up to 25 pounds. Specific vision abilities include close vision and color vision. Ability to solve practical problems and deal with a variety of concrete and abstract variables in situations where only limited standardization exists. The noise level in the work environment may range from moderate to loud. Education, Skills and Experience: • Bachelors’ of Engineering Degree from a four-year college or 5 years related experience and/or training; or equivalent combination of education and experience., • The Manufacturing Engineer is expected to know customer and company requirements by reading, interpreting and understanding the necessary specifications and procedures., • Excellent written and oral communication skills. Must have the ability to translate technical data into a format and language suitable for shop floor personnel., • Strong computer skills used to create elaborate work instructions (CAD, Microsoft Office), • Ability to provide feedback to drive behaviors of employees., • Able to deal with a variety of abstract and concrete variables.

Job Description LaBella is currently looking to hire an Environmental Engineer with air permitting experience in our growing, multi-disciplinary, Environmental Division. LaBella has over 1,800 employees in over 30 offices throughout 13 states. This is an opportunity for a smart and talented professional with enormous upside potential as part of a growing company. We are seeking a highly motivated individual with an entrepreneurial spirit to join a dynamic team working on exciting, multi-phase, technically engaging, and impactful projects. The successful candidate will be responsible for managing air permitting and air compliance projects for industrial, municipal and state agencies. The successful candidate will have a working knowledge of NYSDEC air regulations, air dispersion modeling and emission calculations (potential-to-emit and actual). The successful candidate will assist project managers with developing proposals with scope of work and cost for client review and conduct necessary site visits/field inspections for new air permits/registrations and assessing compliance with existing permits. LaBella offers excellent training and career advancement opportunities and outstanding benefits. Duties • Experience with Title V air permits, state facility permits and air registrations, • Familiarity with NYSDEC air regs and Fed NSPS and NESHAP, • Knowledge of regulations concerning criteria, non-criteria, HTAC, HAPs and their respective state/fed thresholds, • Familiarity with NYCRR Parts 621 & 617, • Familiarity with NYCRR Part 212 analysis (including DAR-1/SGC & AGC & DAR-10/modeling guidelines), • Familiarity with surface coating (e.g., paint booths and NYCRR Part 228), • Some familiarity with air dispersion modeling (e.g., AERSCREEN, AERMOD), • Familiarity with PTE and actual emissions calc (using AP-42 EFs, Engineering calculations, mass balances, etc.), • Methos 9 certified (for plume/opacity observation), a plus!, • Familiarity with EPA Reference Methods for air pollutant measurements (40CFR60 Appendix A) & NIOSH Methods for indoors and personnel testing/measurements, • B.S. degree in Engineering (Chemical or Environmental), • NY State Licensed Professional Engineer, • 7-15 years of experience in a related local environmental position, • Ability to work independently and as part of a team, • Ability to work in a fast-paced environmental consulting team environment., • Ability to work within a multi-disciplined group of professionals., • Strong communication skills (active listening, written, and verbal), • Organized with strong attention to detail, • Highly motivated, with excellent client service skills and a positive attitude, • Strong problem-solving skills, • Valid NYS driver’s license, lean driving record, and reliable transportation Salary Range: $75,000 - $100,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Research Engineer Founded in 2017 and headquartered in Rochester, NY, REMADE℠ is a 170+ member public-private partnership funded in part by the U.S. Department of Energy’s Office of Advanced Materials and Manufacturing Technologies (AMMTO) with an initial investment of $140 million. REMADE is the only national institute focused entirely on developing innovative technologies to accelerate the U.S.’s transition to a Circular Economy. In partnership with industry, academia, trade organizations, and national laboratories, REMADE enables early-stage applied research and development that will create jobs, dramatically reduce embodied energy and greenhouse gas emissions, and increase the supply and use of recycled materials. For more information about REMADE (Reducing EMbodied Energy And Decreasing Emissions), visit . Position Summary The primary responsibility of this position is to support the development and administration of state grant programs that support the creation of technologies to expand the waste tire market and fund demonstration projects aimed at increasing the use of waste tires. This role is vital for driving innovation and fostering sustainable solutions for waste tire management throughout New York State and beyond. The successful candidate will play a major role in managing these grant programs, collaborate with stakeholders, and guide the development of both technology initiatives and demonstration projects focused on expanding the use of waste tires. In addition to managing the tire recycling program, the research engineer will support the broader mission of the Institute by fostering relationships with stakeholders in industry, academia, and government, conducting research on market trends, opportunities, and barriers to new technologies, assisting in the preparation of proposals for securing government or private funding, and contributing to other Institute initiatives as needed. This job is based in the Rochester, NY office. Salary Range: $75k to $90k Primary Responsibilities • Support the development and oversight of a state-funded grant program for waste tire management and the expansion of recycling markets. This includes designing and administering the grant application process, establishing criteria and evaluating proposals, and overseeing the selection and contracting of recipients., • Establish clear objectives, timelines, and milestones for grant recipients. Monitor progress and ensure that projects remain within scope, budget, and timeframe. Conduct site visits and inspections as necessary to evaluate project outcomes and compliance., • Provide technical expertise and guidance to applicants and stakeholders, ensuring that the proposed technologies or solutions meet industry needs and demonstrate feasibility, scalability, and sustainability., • Submit all necessary reporting to state and regulatory bodies. Ensure all activities comply with state laws, regulations, and grant guidelines., • Build strong relationships and promote engagement with stakeholders from industry, academia, and government agencies., • Promote knowledge sharing and best practices in the rubber and tire recycling industry., • Conduct online research to identify market trends, evaluate market opportunities and identify technical, economic, environmental and institutional barriers to the implementation and deployment of new technologies relevant to building a circular economy, • Assist in the preparation of proposals to obtain government and/or private funding of new projects or initiatives, • Experience in one of the following areas:, • Markets for recycled products, preferably rubber, • Technologies for tire recycling, • Rubber compound formulations and manufacturing processes, • Regulations governing waste tire disposal, • Familiarity with New York State businesses involved in tire disposal, recycling, and related activities, • Experience working with federal and/or state agencies, with a preference for candidates who have managed government-funded grant programs, • Project management experience with technical projects in a research environment preferred, • Capable of conducting technology assessments for new and emerging technologies using tools such as technoeconomic analysis, net energy analysis, Lifecyle analysis, and market opportunity analysis., • Benchmarking of new or emerging technology relative to the state-of-the-art, • Ability to systematically analyze complex, technology centric problems, identify technical, economic, market, and institutional barriers to the adoption of emerging technologies, and develop and implement effective solutions., • Strong verbal and written communication skills, and ability to convey complex information in a way that others can readily understand, • Strong attention to detail, ability to multi-task and work effectively in a fast-paced environment, • Grant/proposal writing experience a plus, • Bachelor’s Degree required in engineering or other technical related fieldThe REMADE Institute does not discriminate in the screening or submission of candidates on the basis of race, color, religion, sex, age, national origin, marital status, disability, or other protected status. All applicants must be U.S. citizens or lawful permanent residents Powered by JazzHR pIoDypAmPf

Job DescriptionSalary: $18-$22 We're looking for talented Interns to join our team for the Spring/Summer 2025 Semester! As an Engineering Intern, you will be working with our global R&D team on our Timing and Synchronization Products. We're looking for Interns enrolled in a four-year or post-graduate degree program in the following or related fields: Electrical Engineering Computer Engineering Software Engineering Computer Science Mechanical Engineering Signal Processing Radio Communications What youll be doing: • Working closely with our Engineering Team, you will be designing, developing, and enhancing product features on the latest GPS-based and alternative PNT time synchronization equipment and software., • Coding software (embedded Linux, APIs, microservices, UX/UI, backend services, database integrations) in our embedded Linux stack using languages such as C, PHP, python, HDL, golang, JavaScript, React (per your experience), • Testing new products, new features and software releases to ensure our products meet the highest standards and specifications., • Prototyping and validating new technologies, • Devising test procedures, experiments, test fixtures and software; performing those tests, analyzing the results and generating comprehensive test reports and recommendations., • Analyzing and debugging problem reports and designing fixes, • Working in a global multi-discipline, multi-cultural environment with cross-functional teams toward a common design goal., • Specific project and tasking may vary. Safran Trusted 4D, Inc is an equal opportunity employer who does not discriminate based on race, color, citizenship, religion, gender, sexual orientation, national origin, age, disability, veterans status or any protected category. We encourage veterans and people with disabilities to apply.

Job Description We are currently hiring a Mechanical Engineer in our Building Engineering Division at our Rochester office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Mechanical Engineer will work with engineers as part of a project team to provide HVAC, plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team to develop concepts, strategies, designs, drawings, specifications and reports for Building and Renovation projects. Duties • System selection and calculations for design purposes, • Conduct field work to document existing conditions, • Work with Jr Engineers to develop drawings with building modeling software, • Work independently and as part of a team to complete project designs, • Construction phase services such as submittal review and site visits to monitor project progress Salary Range: $70,000 - $90,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • 4 – 6 years of experience working at an A/E consulting firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Well rounded experience in HVAC, plumbing, and fire protection, • Experience with Revit or AutoCAD is preferred, • Field experience is preferred, • New York State Professional Engineer’s license is a plus Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Insero Talent Solutions is recruiting a Senior Quality/Industrial Engineer for an electronics manufacturing company in Rochester, NY. GENERAL RESPONSIBILITIES: Responsible for documentation control and with analyzing, designing, and improving processes and systems to enhance efficiency and quality in electronics manufacturing operations. This role will also be responsible for manufacturing support and quality initiatives, including creating and maintaining product and component data within the SAP System, and change control for both production and R&D. SPECIFIC RESPONSIBILITIES: Responsible for site management of SAP master data such as the generation of part numbers, BOMs, and routings. • Collaborate with engineering, manufacturing, and supply chain personnel to implement product changes for current and next generation products. Maintain documents at various product stages ranging from the creation of part numbers to the release for manufacturing., • Lead quality assurance initiatives to ensure compliance with industry standards and regulations., • Develop and maintain documentation of processes, standard operating procedures (SOPs), engineering/manufacturing changes and training materials in accordance with ISO 9001:2015 and industry standards., • Review and coordinate with Engineering, Sales, and Safety Agencies on product manuals and labeling, • Bachelor’s degree in Industrial Engineering, Quality Engineering, Manufacturing Engineering, or a related field., • Relevant certifications (e.g., Six Sigma, ASQ Certified Quality Engineer) would be beneficial., • Strong knowledge of general manufacturing, quality control, and lean principles., • Skilled in MS Word and Excel; experience with SAP preferred., • Must be detail oriented and organized in reviewing information, identifying issues, evaluating options and proposing solutions., • Effective written and verbal communication.

Job DescriptionDescription: Join our team as a Highway Project Engineer and take the lead in designing, constructing, and maintaining vital transportation infrastructure! In this dynamic role, you'll combine engineering expertise with project management skills to ensure safe, efficient roads and highways. You'll tackle specialized design tasks and oversee small projects from start to finish, all while ensuring compliance with industry standards and codes. If you're ready to drive impactful projects and shape the future of transportation, we want to hear from you! Why Fisher Associates? At Fisher Associates, we believe in cultivating our gifts to create a legacy of infrastructure that improves the quality of life. Our work shapes communities, enhances sustainability, and creates meaningful connections that last for generations. • Be Heard, Be Valued – We foster an inclusive culture where leadership welcomes your ideas and feedback., • Collaborate & Innovate – Work with a highly skilled, multidisciplinary team on diverse and impactful projects., • Career Growth – Advance with clearly defined career paths, tuition assistance, and ongoing training., • Work-Life Balance – Enjoy a flexible hybrid schedule, optional half-day Fridays, and generous PTO., • Competitive Benefits – We offer a robust benefits package including immediate 401(k) enrollment with annual company contributions, comprehensive health insurance options and company-paid life and long-term disability insurance. Who We Are: Fisher Associates, P.E., L.S., L.A., D.P.C, is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. All services are delivered through the firm’s signature “Clientship” philosophy, which emphasizes not only customized, innovative quality solutions but also an exceptional client experience driven by clear communication, deep expertise, and proactive client advocacy. Salary Range: $48.08-$62.50 Hourly Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Essential Functions • Effectively complete work assignments related to highway design, drainage design, alignments, and other duties applicable to these projects., • Develop preliminary and detailed final design plans and cost analysis for new highway projects or improvements to existing infrastructure that meet client’s goals., • Ensure designs adhere to safety standards, local regulations, and best practices., • Maintain accurate records of project details, including design documents, progress reports, and budget information., • Collaborate and communicate effectively with clients, subconsultants and regulatory approving agencies., • Coordinate with reviewers and other disciplines to ensure accuracy and quality of work., • Attend routine project design meetings and coordinate regularly with the technical staff, to complete the project within the assigned project budget and on schedule., • Provide mentoring, direction and oversight to internal design staff., • Assist Project Manager with project presentations, proposed project schedules and development tasks assigned by the Project Manager. #LI-Hybrid Requirements: Education & Experience • B.S. degree in Civil Engineering or related field (MS preferred), • 10-15 years minimum of transportation experience, highway engineering experience preferred., • Professional Engineering License required., • Uphold professional performance standards aligned with the company’s Mission, Vision, and Core Values., • Build and maintain strong client relationships in adherence to the Fisher Clientship philosophy., • Demonstrate high-quality work and a commitment to continuous improvement., • Collaborate effectively across all levels, fostering respect, trust, and active listening in all interactions., • Take ownership of responsibilities and outcomes with integrity, honesty, and transparency., • Exhibit a proactive, self-motivated attitude with a strong desire to learn and grow., • Apply critical thinking and problem-solving skills while demonstrating sound judgment., • Communicate professionally and effectively in both written and verbal formats., • Manage projects, time, and tasks efficiently in a fast-paced environment., • Maintain strong attention to detail while adapting to changing priorities., • Accept and respond positively to feedback. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job DescriptionDescription: Lead Innovative Bridge Design and Engineering Projects with Fisher Associates Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaningful impact on public infrastructure with a firm known for its technical excellence and innovative approach. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you're a licensed PE with hands-on experience in bridge design, transportation structures, and a passion for building safe, sustainable infrastructure — we want to hear from you. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Participate in project planning meetings and align tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations as needed., • Ensure designs adhere to state and local standards, regulations and safety codes., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design, • Provide technical support during construction, respond to RFIs and attend site visits., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge engineering design projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Remote Requirements: What You Bring, Your Expertise as a Bridge Project Engineer • B.S. degree in Civil Engineering or a related field, with a Master’s preferred., • Over 10 years of transportation experience, structures/bridge design experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it., • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Experience with MicroStation, STAAD, Bridge Design Software programs preferred., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Protection & Controls Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 7 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Lead Protection & Control Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Lead overall protection design for all capital projects and define relay protection functionality/scheme in accordance with Avangrid TM standards, • Perform detailed review of all existing protection schemes present in the subject area to incorporate into new design. Special areas of focus are anti-islanding schemes, generator intertie settings, SPS schemes, etc. (anything outside of normal). Basically, the goal is to ensure that we don’t remove required protections already in place or at least be aware of how things work today before we modify existing schemes., • Review contractor provided relay settings, logic diagrams (including Goose messaging diagrams), and operational descriptions for all capital projects, • Review/perform area relay coordination and determine what level of area coordination is required/needed (based on changes in fault duty and overall system performance due to the project changes), • Review contractor provided relay settings for all temporary builds and construction sequence steps including mobile settings, • Review/provide input to Customer’s Aspen model changes as required for individual capital projects, • Provide design support during implementation/testing and commissioning of the above the items, • Provide feedback to Customer on existing TM standards and help refine the Customer’s design practices, • Ensure all as-built documentation gets filed appropriately in the plant filing location at Customer, • Lead overall automation and integration design for all capital projects, • Review/design SCADA point indexes, • Review contractor provided HMI screens/settings for all capital projects, • Review/design Protection settings and settings basis, • Review/design IED Data Maps, • Review/create substation level operational descriptions (HMI operation, relay front panel operation, etc.), • Review automated maintenance data gathering (Digital Substation Data) point lists, • Track all required licenses/firewalls and key automation and integration deliverables needed for project implementation, • Provide design support during implementation/testing and commissioning of the above items, • Bachelor’s Degree in Electrical Engineering (BSEE) with a strong background and knowledge of all utilities engineering disciplines, • 10 years or more of relay/protection settings engineering experience, • Proficient in Microsoft Project, Excel, PowerPoint, and Word, • Proven experience in Substation Design should include general arrangement, electrical equipment plans, elevation and section views, Equipment cable trays, cable design, conduit fill calcs, rigid bus calcs, • Professional level skills in MicroStation, AutoCAD, • IEC 61850/Goose experience required Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9001, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical leader for the organization, with the responsibility of expediting the process flow of jobs through the factory from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Requirements Minimum Qualifications: Position is located in Rochester, NY • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word, Excel and MRP Systems, • Solid understanding and application of Geometric Dimensioning & Tolerancing (GD&T), • Ability to read and understand blueprints at an advanced level, • Experience in the utilization of lean manufacturing practices and ISO Quality Systems, • Three years or more of manufacturing/sheet metal with welding fabrication knowledge, • CNC machining / programming background is a plus, • Ability to design & model in 3D CAD Software, Solidworks Preferred Production Specific Duties: • Voices all concerns while working with other production staff, Quality Assurance, Engineering and Vice President of Operations to resolve any and all current or potential problems affecting the production schedule, • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures, • Recommend continuous improvement actions for improving work processes Departmental Specific Duties: • Responsible for all phases of the CNC Programming Process, review Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual time and material standards vs. quoted time and material standards, • Drive process improvement to generate cost reduction, • Help write the process sheets (travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed, • Design tooling and gauges as needed to ensure customers quality requirements are achievable, • Control proper revision levels for all programs in the company database Measurement Tools: • On time delivery to customers, • Quality performance recognized in scrap reduction and minimized process variation, • Decrease in job setup time on all equipment, • Cost savings for production; including tooling, • Project management and document control organization skills

Job Description We are currently hiring a Senior Plumbing and Fire Protection Engineer in our Building Engineering division at our Rochester, NY office. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of clients. The Senior Plumbing and Fire Protection Engineer will work with clients to provide plumbing, and fire protection designs, studies and technical support as required to fulfill project requirements. Typical projects will involve field work, design, and construction administration services. A successful candidate will be able to work well in a team, provide leadership to Jr Engineers, and be capable of developing new business. This position offers the opportunity to transition into a leadership role for the office. Duties • Supervise plumbing and fire protection engineering staff to develop concepts, strategies, construction documents and engineering reports for new buildings and renovation projects., • Ability to provide mechanical leadership for both large multi-discipline design projects including plumbing, process piping systems, and fire protection design., • Responsible for code review of plumbing and fire protection systems., • Responsible for plumbing and fire protection design related to corrections, higher education, laboratory, medical, and other typical market sectors., • Ability to complete fire protection hydraulic calculations using industry software programs., • Interact directly with clients technically by completing analysis of design options, cost benefit comparisons, and communicating results to assist owner in decision making process., • Responsible for directing plumbing and fire protection project team to meet project goals and maintain quality work product., • Manage the mechanical project financial performance and schedule., • Client and Business Development., • Proposal writing to initiate new business., • Maintain client relationships. Salary Range: $90,000 - $120,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Minimum of 10 years of experience with a professional A/E services firm is preferred, • Bachelor’s degree in Mechanical Engineering is preferred, • Strong writing, organizational and communications skills, • Ability to work under pressure, and multi-task efficiently Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future. LOCATION: Rochester, NY SUMMARY: This position plays a crucial role in the manufacturing operation, ensuring that production processes run smoothly and efficiently. They are responsible for designing, implementing, and improving production processes, ensuring that products are manufactured to the highest quality standards while minimizing waste and costs. The Production Engineer is accountable for manufacturing costs, quality and quantity of production, schedule attainment, methods used and effective use of production hours, skills, machines and equipment. Participate in planning production schedule, and manufacturing controls as related to manufacturing operations. Expedite scheduled production, investigate delays and initiate corrective action to assure economical production through efficient procedures. Administer company rules, regulations and policies governing employment. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. • Monitor and measure daily production output as compared to standards in the areas of run times, waste, down time and have ready dates. Anticipate and prepare for short term and long-term production needs., • Establish action plans and timelines for quality, safety and service improvements., • Heavily involved in technical improvements. Improvements include refining internal operation methods or sequences as well as improving efficiency., • Provide internal and external root cause / corrective action analysis for the Department, • Lead teams to debottleneck operations to drive overall production performance improvements., • Develops and implements changes to production processes and collaborating with other departments such as Quality Control and Maintenance., • Analyzing production data, product margins, identifying opportunities for improvement., • Utilize data to recommend design changes to correct/resolve problems and contribute to the optimization of products to the required technological specifications or end uses., • Lead teams to debottleneck operations to drive overall production performance improvements., • Training operators and technicians on new processes and developing and maintaining documentation related to production processes., • Active team leader for various teams including but not limited to safety, uptime, waste and SMED., • Responsible for continually improving safety procedures in assigned department, • Responsible for manufacturing's segment of new product development. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE Bachelor's degree (BS.) or equivalent from a four-year college; and five to seven years related experience and/or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand, walk, and sit. The employee is occasionally required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and risk of electrical shock. The noise level in the work environment is usually loud. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: .

Job DescriptionDescription: Lead Innovative Bridge Design and Engineering Projects with Fisher Associates Fisher Associates is actively seeking a Bridge Project Engineer with a Professional Engineer (PE) license to lead bridge design, structural analysis, inspection, and load rating of transportation infrastructure projects. This role is ideal for a Civil or Structural Engineer looking to make a meaningful impact on public infrastructure with a firm known for its technical excellence and innovative approach. As a key member of our civil/structural engineering team, you’ll collaborate on multidisciplinary projects, applying your bridge engineering expertise in a supportive, growth-oriented environment. If you're a licensed PE with hands-on experience in bridge design, transportation structures, and a passion for building safe, sustainable infrastructure — we want to hear from you. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Lead bridge design, including load rating, structural analysis, and foundation design., • Develop design plans, specifications, and cost estimates for bridge and transportation structures., • Maintain accurate records of project details, including design documents, progress reports, and budget information., • Participate in project planning meetings, coordinating tasks to meet scope, schedule, and budget requirements., • Support project managers with schedules, documentation, and presentations as needed., • Ensure compliance with safety codes, design standards, and regulatory requirements., • Conduct field inspections and prepare detailed bridge and culvert inspection reports., • Provide technical support during construction: respond to RFIs, conduct site visits, and ensure design integrity., • Collaborate with internal teams, subconsultants, regulatory agencies, and clients to ensure seamless project delivery. Your Impact Matters, Your Career Thrives. Work on engaging bridge engineering design projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Health insurance-Medical, Dental & Vision, • 401(k) plan, • Company-paid life and disability insurance, • Hybrid work schedule, • Generous PTO, • Strong work-life balance, • Shareholders program, • A comprehensive range of benefit options to support your well-being, financial security, and peace of mind. Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise • B.S. degree in Civil Engineering or a related field, with a Master’s preferred., • Over 10 years of transportation experience, structures/bridge design experience preferred, • Professional Engineering License (PE) or ability to obtain it., • Experience with MicroStation, STAAD, Bridge Design Software programs preferred., • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values., • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges., • Driven to take ownership of your projects, prioritize your tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth., • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships., • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset.

Job DescriptionDescription: Advance Your Career | Shape the Infrastructure of Tomorrow Fisher Associates is seeking a Bridge Design Engineer (Civil/Structural) with 5–10 years of experience to join our growing Bridge and Transportation Engineering team. Whether you're already licensed or on the path to PE certification, you'll gain mentorship and work on meaningful bridge and transportation infrastructure projects that enhance safety, sustainability, and connectivity in the communities we serve. About Fisher Associates: Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Support bridge design engineering, including load rating, structural analysis, and foundation design., • Develop design plans, construction documents, specifications, and cost estimates for bridge and transportation structures., • Maintain detailed records of bridge design documents, reports, and budgets., • Support project managers with schedules, documentation, and presentations., • Ensure designs adhere to state and local standards, regulations and safety codes., • Promote, utilize and support QA/QC processes to guarantee quality deliverables., • Conduct field inspections and prepare detailed bridge inspection reports and analyze foundation design., • Provide technical support during construction, respond to RFIs and attend site visits. Your Impact Matters, Your Career Thrives. Work on engaging bridge design engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Bridge Design Engineer • B.S. degree in Civil Engineering or a related field, Master’s preferred, • 5-10 years of transportation experience, structures/bridge design engineering experience preferred, • Professional Engineering License (PE) preferred or ability to obtain it, • Proficiency in MicroStation, STAAD and Bridge Design Software, • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset

Job Description Title Quality Engineer Department Quality Reports to Quality Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. RPO offers exciting career paths and work on market-leading programs. See below one of many career opportunities to join the RPO team! Job Summary: The Quality Engineer will be responsible for providing high level technical support for RPO’s QC Inspection area. Performs and trains others in QC test and inspection processes and makes decisions on product and process acceptability. Recommends appropriate test and measurement equipment and arranges for equipment calibration. May work in a cleanroom environment and low-light areas. Provides Quality Assurance technical support for all aspects of the RPO ISO 9001 quality management system, including evaluation of requests for quotation, setting up the QA support for new jobs, supporting existing jobs, records management, and document writing. Participates in internal quality audits, interacts with suppliers, customers, external auditors, and co-workers to provide support as needed. You will: · Explain and interpret ISO 9001 QMS requirements as they pertain to RPO and its products, processes and services · Explain and interpret optical and mechanical drawings, specifications, standards, purchase orders and contracts extracting the essential information for QA support and risk analysis · Cleaning, inspection and evaluation of product to specifications and requirements · Lead and participate in internal audits · Functions as auditor escort during external audits · Provide QA Engineering support for production, prototype and engineering activities including risk analysis, quoting, quality and test plans, inspection and testing, data gathering and analysis, sample submissions, performance reporting, project close-out, etc. · Selection and calibration of inspection and test equipment, working with equipment and calibration suppliers · Assess gage system status and adequacy · Make final decisions on product acceptability · Review, disposition and process RMAs. · Lead and participate in DOEs, FMEAs, DFMs, DVT, DFM, Lesson’s Learned and other activities · Train others in the use of inspection and measuring equipment, testing, SPC and other subjects · Write inspection instructions and quality / test plans including test and measuring equipment usage procedures and procedures requiring customer approval · Perform / coordinate environmental, durability, reliability and other testing as needed · Assemble and submit FAI and other sample packages · Review and approve Supplier FAI and other sample Packages · Work with Supply Chain to improve and control RPO supply base · Issue, manage, validate and close CAPAs · Create, manage and participate in ECOs · Implement and manage RPO document control system · Interact professionally with Manufacturing, Sales, Purchasing, Engineering, customers, suppliers, and all other individuals as required · Identifies and recommends improvement opportunities · Other duties as assigned You have: · Familiarity with QC inspection equipment and techniques · Computer skills, including Microsoft Office. Minitab preferred · Ability to interpret optical and mechanical drawings, standards and specifications. · Familiarity with ISO 9001, AS-9100, AS9102, MIL-STD-810, MIL-PRF-13830, ISO 10-110 and other standards preferred. · Familiarity with control of government property preferred · Ability to use test equipment such as thermal, salt and humidity chambers and other test equipment preferred. · Understanding of APQP, PPAP, FMEA, DVT, DFM, DOE, Gage R&R, Measurement Analysis, SPC, Six Sigma, Lean Manufacturing, 5S, DMAIC, PDCA, FAI, etc. · Ability to work well with people · Self-starter, capable of working with very little direction · Good oral and written communication skills · Good Multi-Tasking skills · Ability to read, analyze and interpret complex documents. Ability to communicate effectively to team members and management. · Ability to apply advanced mathematical concepts. · 5 years’ experience in quality, manufacturing, optical or engineering fields. · A.A.S. in Quality, Engineering, Technology or Business discipline · B.S. Preferred · ASQ Certifications favorable You Are: · Results-Oriented: Motivated, hard-working and ready to level-up. · Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge. · Process Oriented: Well organized, demonstrating attention to detail. · Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude. · Accountable: Demanding the highest quality from yourself and team members. · Detail-Oriented: Have excellent time management and organizational skills. · A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude. · A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” Work environment & Physical Demands: · Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus and see colors. May involve prolonged periods of magnified inspection (eye strain) • Requires good hand-eye coordination, arm, hand and finger dexterity, including ability to grasp. · Subject to some soilage and irritation from cleaning solutions. (Lab Coats provided) · Generally works in a clean environment and works to maintain the environment as such. · Safety Glasses are required · May require area specific safety training • This position works in a manufacturing environment. The noise level in the work environment is usually moderate-loud., • The employee is regularly exposed to moving mechanical parts and fumes or airborne paper particles., • May work at different workstations as production needs require, or shifts from one station to another, during the production process. You Will Enjoy: · Growth: The opportunity to learn and advance your career, internal training and advancement opportunities, Tuition Reimbursement Program. · Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match, company contributions to medical savings plans. · Wellness: Health, Dental, Vision Insurance. Company provided Life Insurance and Disability Insurance. · Balance: 11 paid holidays, generous paid vacation and sick time · Culture: an energetic, value-driven team where you will experience the reward of meaningful work! Disclaimer: This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire. Monday-Friday 7am - 3:30pm

Job DescriptionDescription: The Senior Quality Engineer will lead and facilitate the implementation of quality initiatives and their continual improvement. Responsibilities include lead, coach, and facilitate problem solving, analysis of data and continual improvement activities. Review and understand customer prints and specifications. Ensure the quality of the parts produced meets all expectations. Quickly and effectively take action when external or internal non-conformances are found. Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions. • Follows all safety process and procedures in accordance with the job and Company policy, • Be the Quality liaison between the customer and site manufacturing process for understanding quality requirements and working through quality issues., • Facilitate and promote use of appropriate problem-solving techniques (8D, 5-Why) for effective root cause analysis and successful corrective action. Interfaces with engineering and manufacturing to ascertain and implement corrective actions., • Provide technical support to operations ensuring consistent adherence to quality requirements., • Determine when process stability and capability studies should be performed on existing processes. Review and analyze results. Recommend changes to processes based upon findings and perform follow up to verify effectiveness., • Participate in the Advanced Product Quality Planning activities (NORP) to determine appropriate use of existing and new measurement systems during new tool or process design and startup., • Participate in the PT lot process to ensure that all quality checks as outlined in the MPCD (operation work instructions) are in place and will ensure that customer requirements will be achieved., • Coordinate, develop, and submit PPAP documents (including Control Plan, FMEA, Process Flow Diagram) for new product launches to meet customer requirements., • Generate efforts to achieve and surpass the company’s quality key metrics through the execution of QMS processes and by proposing new or modified approaches., • Understand and promote overall compliance with ISO 9001 specifications., • Manage priorities for inspection workload and support inspectors with the means to complete inspection tasks., • Interpret and explain GD&T callouts on customer prints for inspectors to follow., • Maintain performance evaluations of associates with evidence of their embodiment of the company’s core values and data on their achievement towards S.M.A.R.T. goals., • Demonstrate a productive work ethic and commitment to quality that sets the standard for the Quality Engineer role. May Supervise 4-6 inspectors across first and second shifts. Education Experience Bachelor’s degree (B.A.) in engineering or technical field or equivalent combination of education and experience. 7+ years related experience or training 2+ years experience with supervising Computer Skills: To perform this job successfully, an individual should have knowledge of Microsoft Outlook, Microsoft Word, Microsoft Excel, and Microsoft PowerPoint. Other Requirements: Knowledge and experience in metal fabrication, stamping and forming. Ability to use standard manufacturing measurement tools and equipment. SPC, GD&T, DOE, Gage R&R, statistical analysis. Basic understanding of mechanical processes, materials and machinery. Strong problem solving skills. Ability to travel (15%) to customers and suppliers. ASQ certification a plus. PC-DMIS experience a plus. Language Skills: Very High Skills: Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to effectively present information to top management, public groups, and/or boards of directors. Mathematical Skills: High Skills: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Reasoning Ability: Very High Skills: Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to stand; walk; sit; maneuver through the office and factory and lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform within the described work environment. The work environment is regularly humid with extreme heat or cold. While performing the duties of this job the noise level in the work environment is usually loud

Job Description fairlife, LLC is a Chicago-based nutrition company that creates great-tasting, nutrition-rich and dairy products to nourish consumers. With over $3B in annual retail sales, fairlife's portfolio of delicious, lactose-free, real dairy products includes: fairlife® ultra-filtered milk; Core Power® High Protein Shakes, a sports nutrition drink to support post-workout recovery; fairlife® nutrition plan™, a nutrition shake to support the journey to better health. A wholly owned subsidiary of The Coca-Cola company, fairlife, LLC has been recognized by both Fast Company and Nielsen for its industry leading innovation. To learn more about fairlife and its complete line of products, please visit fairlife.com. job purpose: The Mechanical Engineer Packaging is a critical role in the commissioning, start-up of fairlife's state of the art, greenfield facility in Webster, NY. The Mechanical Engineer Packaging continuously evaluates the packaging machines for reliability and effectiveness. Working closely with OEM's the mechanical engineer will be heavily involved in ensuring packaging machines are installed, commissioned and validated effectively. In fulfilling this role, the Mechanical Engineer Packaging works closely with engineering team department members, maintenance, and operations to solve complex problems while building the knowledge and capabilities of the larger team. They provide day-to-day technical support on all aspects of plant machine center operations. The Mechanical Engineer Packaging works with maintenance planning and operations to plan and schedule all preventative and predictive maintenance for machines as needed. They will act as the subject matter expert for new system start up and commissioning for OEM's, installation teams, and system integrators to ensure proper transfer of documented engineering and program changes, manuals, and adequate training on the installation/changes that have been completed. Responsibilities: • Provide technical direction and leadership for plant packaging subject matter experts of blow molders, fillers, case packers, sleeve applicators and palletizers., • Determine root cause of reliability failures and implement measures to prevent future events., • Analyze machine efficiency and reliability data to identify opportunities for improving performance and to reduce downtime & costs., • Design and implement packaging equipment improvement projects and upgrades. Reverse engineer and improve OEM part designs., • Provide technical support on machine reliability issues., • Troubleshoot a wide range of issues related to the operation of packaging equipment., • Work closely with OEM technicians and leverage all available resources to minimize downtime., • Maintain and update all relevant documentation for machine centers, such as schematics and manuals., • Make data-driven recommendations for critical spare parts to be maintained in internal inventory., • Validate and characterize new processes, equipment, and fixtures for production implementation, prioritizing damage-free performance., • Bachelor's degree in engineering (mechanical, industrial, or manufacturing) or equivalent experience., • 6+ years of related engineering and high-speed manufacturing experience., • Mechanical design and reverse engineering experience (SolidWorks, Creo, FARO, Geomagic)., • Solid technical understanding of automated equipment (PLCs, instrumentation, actuators, valves, pumps, motors, and mechanisms)., • Proven ability to troubleshoot Programmable Logic Controllers (PLCs), with a strong preference for Studio 5000., • Proven ability to lead teams and drive improvement in technical disciplines., • Sitting/Standing/Walking: Stands, walks, and sits during completion of job responsibilities., • Lifting/Carrying: Occasional lifting requirements as job demands. Must be able to lift a minimum of 50 lbs. on an occasional basis., • Notify supervision of any repairs or adjustments that are required that may affect product quality or food safety., • Understand, observe, and comply with the handling and usage of the color-coded container policy while in the Production Areas., • Perform all duties necessary to meet Company, Customer and/or Government requirements/standards as prioritized by the Company., • Ability to initiate action to prevent the occurrence of nonconformities relating to Food Safety and the Quality of the product, processes, quality system, or safety system., • Identify and record any problems relating to Food Safety and the Quality of the ingredients, processes, quality system, or safety system., • Control further processing or delivery of nonconforming product in terms of Food Safety and Quality issues until the deficiency or unsatisfactory condition has been corrected. reports to: Engineering & Reliability Manager Packaging exempt/nonexempt: Exempt *Base pay offered may vary depending on geography, job-related knowledge, skills, and experience. A full range of medical, financial, and/or other benefits, dependent on the position, is offered. Base pay range:$110,000—$120,000 USD fairlife, LLC is an equal opportunity employer. We do not discriminate on the basis of race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. All qualified applicants and employees will be given equal opportunity. Selection decisions are based on job-related factors. In addition to its nondiscrimination commitment, the Company will also provide reasonable accommodation of qualified individuals with known disabilities unless doing so would impose an undue hardship on the Company. If you have a disability and would like to request accommodation in order to apply for a position with us, please email . For Recruitment Agencies At fairlife, we manage the majority of our hiring internally through our dedicated Talent Acquisition team, which is actively engaged in direct candidate sourcing. Most of our roles are filled through applications submitted via our careers site or through direct outreach by our team. As our recruitment is primarily handled in-house, we work only occasionally with external agencies, and only those on our existing, pre-approved vendor list. At this time, we are not reviewing or expanding that list. Unsolicited resumes or submissions from external agencies not authorized by our Talent Acquisition team will be considered direct candidate applications. As such, fairlife will not assume responsibility for any placement fees associated with these submissions.

Job DescriptionPEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Electrical Engineer Your Role: The Electrical Engineer is responsible for machine control hardware and software design, procurement of components, startup, debugging, calibration and verification. This individual will assist with the designing of electrical power and control systems for industrial and commercial equipment used in medical, pharmaceutical, alternative energy, semi-conductor and other industries. They will be supporting the NPI (New Product Introduction) group in the development of new product design and introduction, functional specifications, technical design, automated assembly, development and testing within PEKO and for our customers. Essential Functions: • Create and review electrical schematics, wiring diagrams, and other technical documentation., • Develop and maintain PLC software for various applications, including automation, process control, and robotics., • Assist in creating specifications, critical parameters and statement of work., • Apply knowledge in electrical power transmission, controls systems, programing, wiring/panel design, automation for design and development., • Conduct thorough electrical testing and troubleshooting to ensure system functionality and reliability., • Utilize problem solving and creative thinking skills to develop solutions and implement design options with customers, suppliers and manufacturing, while working collaboratively within a team environment., • Collaborate with mechanical engineers, software engineers, and technicians to integrate electrical systems into complete electromechanical assemblies., • Bachelor's degree in Electrical Engineering or a related field., • 3 years of experience in electromechanical hardware and software design and development., • Understanding of PLC programming (e.g., Allen-Bradley, Siemens, Rockwell)., • Familiarity with electrical schematic design and drafting software (e.g., AutoCAD Electrical, EPLAN)., • Experience with electrical testing equipment and procedures., • Excellent analytical, problem-solving, and troubleshooting skills., • Strong communication, interpersonal, and teamwork skills., • Ability to work independently and as part of a team., • Proficiency with component selection and sizing for electrical systems (e.g.relays, circuit breakers, wire sizing, power supply sizing)., • Knowledge of text-based languages; C, Java, Python a plus., • Knowledge of best practices for industrial controls, working knowledge of NFPA/NEC code for electrical system design. Reports To: NPI Engineering Manager Work Authorization: US Persons PEKO Perks: • Competitive Compensation, • Tuition Reimbursement (IRS Allowable pre-tax Max), • 401K, Medical, Dental, Vision, • Flexible Spending & Health Savings Accounts, • Life, Short and Long-Term Disability, • We care about our talented and loyal PEKO family., • We are committed to providing a safe, clean, and positive workplace., • We believe in transparency, honesty, and respect for all stakeholders., • We are dedicated to maintaining an agile and financially prudent organization., • We foster the belief that PEKO people are resilient problem-solvers impacting the future., • This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice., • For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $75,000 - $85,000 per year. The wage range for this role considers a wide range of factors when making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training. Powered by JazzHR FRVKwUedJI

Job Description The Sr. Water/Wastewater Engineer will work on water and wastewater treatment as well as distribution and collection of related projects. This individual will provide leadership and work closely with the water/wastewater design team and other discipline team members. The chosen candidate will be responsible for oversight of all technical aspects of a project, as well as administrative and management duties. The Engineer will be involved in business development activities such as responding to proposals and client outreach. Duties • Provide daily oversight and guidance to water/wastewater team, • Provide weekly scheduling of time for team members as well as review of weekly time sheets, • Prepare scopes of work, budget and monitor budgets throughout the entire project, • Seek out and pursue business development opportunities to further expand the group in targeted geographical regions of New York, • Establish relationships and teaming opportunities with W/MBE companies for given projects, • Provide assistance on developing design concepts and potential alternatives, • Provide QA/QC to produce effective and high-quality project documents (including reports, design drawings, and specifications), • Assist clients with construction procurement, • Support projects in construction, including office administration and field observation oversight, • Assist with water and wastewater operations and research, hydraulic/process modeling, environmental review, permitting, and project financing, • Become actively involved with local, state or national professional associations Salary Range: $100,000 - $130,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor’s Degree in Civil and/or Environmental Engineering, • Minimum of 10 years’ experience, • Professional Engineer license in New York State, • Track record of developing good working relationships with municipal, industrial, and/or institutional clients, • Project management and leadership experience on various sized projects, • Effective communication skills using oral, graphic and written forms, • Ability to travel to project sites and meet with operators to discuss technical matters, • Ability to manage multiple workloads and budgets Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description Cannon Industries, Inc. A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning QS:9000, ISO:9002, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: This individual must function as a technical project leader for the organization with the responsibility of expediting the process flow of jobs through the shop from post order entry to the shipment of the product to the customer. All work must be performed in a timely and cost-effective manner. In this role, the engineer is required to perform complex engineering and/or design tasks that require the development of new and improved techniques and procedures. Minimum Qualifications: • Intermediate level professional, • Two years or more of professional experience in a manufacturing business environment, • Five years or more of manufacturing/sheet metal/welding fabrication knowledge, • CNC machining / programming background is a plus, • A.S. Degree in Engineering required; Manufacturing, Mechanical or Industrial Degree (B.S. preferred) Specific Duties: • Responsible for all phases of the quoting process including; developing a Bill of Materials for purchasing to facilitate pricing inquiries, calculating material usage’s, etc., • Perform all phases of Project Management duties including cost estimating, manufacturing engineering, and working to ensure quality production and on time shipping of customer orders, • Create detailed drawings for flat blank layouts using CAD system, • Monitor actual job cost vs. quoted job cost, • Drive process improvements to generate cost reduction, • Help write the process sheets (Travelers) for the jobs, • Ensure all programs are updated with any modifications from the previous run, • Design machining, inspection and assembly fixtures, • Provide technical direction to operators as needed Measurement Tools: • On time delivery to customers, • Quality performance, • Decrease in job setup time on turret, mills and lathes, • Cost savings for production; including tooling, • Project management and document control organization skills, • Have a “Team player attitude”, promote commitment and follow through This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job Description Job Summary: The Sr Manufacturing Engineer is responsible for driving improvements in the performance and capabilities of our precision machining operations that include CNC Milling and Turning equipment. They will lead focused projects to optimize cycle times, improve yields, increase machine efficiencies, and introduce new products into the factory. They will also support the manufacturing operations to deliver quality products on-time to customers. Essential Duties and Responsibilities: • Process development, machine programming, and prototype development work., • Provide technical support to machinists and operators to ensure smooth production runs., • Troubleshooting of equipment issues and resolution of problems related to tooling, setup, and machine performance., • Use CAD and CAM software to create part models, toolpaths, and detailed machining instructions for CNC machines., • Consulting with Chief Manufacturing Engineer, Program Management, Quality, and Engineering regarding part quality requirements and to ensure that designs are manufacturable and meet tolerance requirements., • Consulting with customers and internal applications engineering regarding current projects and upcoming projects., • Participate in strategic improvement events focused on improving throughput, profit margins, and overall manufacturing efficiency., • Lead Quality improvement efforts for assigned work areas / programs., • While performing the duties of this job, the employee is regularly required to stand, walk, and use hands to operate machinery and tools., • The employee may be required to lift up to 50 pounds occasionally., • The work environment includes exposure to noise from machinery and a variety of physical demands, including the use of precision instruments., • Protective equipment such as safety goggles, hearing protection and other safety equipment required to perform the job effectively and in a safe manor., • Bachelor’s of Engineering Degree from a four year college or >5 years related work experience., • Relevant certifications (i.e. MasterCam programming) are highly desired., • Hands-on experience with CNC machines, milling machines, lathes, grinders, and other precision machining equipment. Expertise with horizontal and vertical 5 axis milling as well as multi axis turning and mill turn is a must., • Experience using precision measurement instruments (e.g. micrometers, calipers, height gauges, CMM machines), • Solid knowledge of manufacturing quality control processes and standards., • Ability to work independently and in teams in a fast-paced, high-tech environment., • Excellent communication and interpersonal skills aligned with our Mission-Vision-Values., • Proficient in Microsoft Office Suite (Excel, Word, Outlook) and other relevant software for managing production and performance metrics.

Job Description K&A Engineering Consulting – is a privately held company, providing comprehensive consulting, engineering and design, program/project management, construction management, and support services to power utility and industrial clients. Specializing in substation, transmission, distribution, distributed energy resources, and EPC services, we excel in solving complex challenges with precision-driven solutions. We pride ourselves on employing top talent, fostering a culture of excellence, and building meaningful relationships with clients and employees. Powered By Innovation, Passion, And Purpose. Start your K&A Career: We are seeking a highly motivated and skilled Transmission Engineer to join our team at K&A Engineering in Rochester, New York. In this role, you will have the opportunity to work on exciting and challenging projects that make a real impact in the energy and utility sectors. You’ll be part of a dynamic, people-focused team where your expertise, ideas, and contributions will be valued and celebrated. Role Expectations: • Conductor Selection, • Structure recommendations, • Insulation, A/C interference, static wire, grounding studies, • Line Design: Plans and Profiles, Cross section details, • LiDAR and aerial photo data, • Utilization of wetlands, vernal pool and sensitive resource data in line and structure design and placement, • Detailed estimate and probability modeling, • Other studies as required to complete the projects, • Lead overall transmission line design for all capital projects, • Review/Design transmission line plan and profile drawings using PLSCAD to ensure compliance with Avangrid TM standards and NESC/other standards, • Drive the project plan for transmission line routing and strategy, specifically:, • Decide whether to rebuild existing lines or obtain additional right of way based on area congestion and local politics/permitting issues, • Determine required structure designs based on design constraints, • Bachelor of Science in Electrical Engineering or related degree from an ABET accredited program., • 5+ years of electrical engineering experience within transmission lines, • Perform engineering responsibilities without assistance and minimal supervision, • Strong knowledge in standard engineering techniques and procedures Why Join K&A? People-First Culture: We put our people at the center of everything we do, creating an environment where your professional and personal growth is a top priority. Innovation & Learning: We encourage continuous learning and invest in your development through training, mentorship, and hands-on experience. Collaborative Team Environment: We believe in the power of collaboration and working together to achieve the best outcomes for our clients and employees. Recognition & Growth: We’ve earned our reputation through uncompromising precision and a commitment to excellence. As an agile and fast-growing company, we offer plenty of opportunities for your career advancement and growth. Competitive Compensation & Benefits: We offer a comprehensive benefits package for eligible classified employees, including but not limited to: • Medical, Dental, and Vision Insurance, • FSA, HSA, and Dependent Care Spending Account, • 401K (Traditional and Roth with Company Match), • Lifestyle Spending Account (LSA), • Paid Parental Leave, • Paid Holidays and Flexible PTO, • Tuition Reimbursement, Parking and Transit Reimbursement, and Pet Insurance, • Long-Term Disability, Short-Term Disability, and Life Insurance The salary range for this role considers a wide range of factors that are considered in making compensation decisions, including but not limited to technical ability, experience and training, licenses and certifications, and other related skillsets. The disclosed range is an estimate and has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled.

Job Description * • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Principal, Associate or Project Manager to finalize Project Scope and Schedule of deliverables and understands priorities identified., • In addition to duties of project engineer/project designer, applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies and follows projects through program, schematic, design development, construction document, bidding and construction phases., • Supervises, coordinates and reviews work, schedules and assigns work to meet completion dates., • Develops reports, studies, and system analysis., • Works in an efficient an effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts client directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs and schedules and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR ywDT1q6P7M

Job DescriptionWe are seeking a Data Support Engineer with experience in both SQL and NoSQL based architectures to join our team. This position will be responsible for the creation, maintenance and troubleshooting of data analysis tools and queries. Duties and Responsibilities: • Generate, maintain, and troubleshoot report queries, • Provide training to users on interpretation of report data, • Research and evaluate new technologies, • Create and maintain documentation of system schema, design, and components, • Develop scripts to automate tasks and elements of workflows Minimum Requirements: • Bachelor’s degree in Computer Science, Information Technology, or related field, • 3+ years professional experience in Information Technology, Data Analysis, or related field, • Experience in Windows desktop and Linux environments Desired Knowledge and Experience: • Hadoop/HDFS/MapReduce environment, • Hive query environment, • PostgreSQL, MySQL, OracleSQL environments, • Redis, • Data interchange formats, especially JSON and XML, • Scripting writing in languages such as Bash, Perl, or Python We are a Hybrid Office - 2 days in office and 3 days remote Powered by JazzHR ZIyFTDcUrw

Job Description M/E Engineering is interviewing for a Senior Mechanical Engineer in our Rochester, NY office. We are a full-service MEP engineering firm providing design and technology services to our clients. Our team of nearly 200 engineers and design professionals work to create built environments that support a sustainable future for the communities we live in, work in, and care deeply about. M/E Engineering is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. Responsibilities • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption, and modifications of standard techniques and procedures., • Works with the Principal, Associate, or Project Manager to finalize project scope and schedule of deliverables and understands priorities identified., • Applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies, and follows projects through program, schematic, design development, construction document, bidding, and construction phases., • Supervises, coordinates, and reviews work., • Schedules and assigns work to meet completion dates., • Develop reports, studies, and system analysis., • Works in an efficient and effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts clients directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs, schedules, and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR f3QcT8eEEN

Job Description * • Possesses a professional attitude showing interest in M/E's reputation and growth., • A fully competent engineer in all conventional aspects of the area of their assignment., • Plans and conducts work requiring judgment in independent evaluation, selection, adoption and modifications of standard techniques and procedures., • Works with the Principal, Associate or Project Manager to finalize Project Scope and Schedule of deliverables and understands priorities identified., • In addition to duties of project engineer/project designer, applies advanced practices and techniques, adjusts and correlates data, recognizes discrepancies and follows projects through program, schematic, design development, construction document, bidding and construction phases., • Supervises, coordinates and reviews work, schedules and assigns work to meet completion dates., • Develops reports, studies, and system analysis., • Works in an efficient an effective manner and makes good decisions., • Evaluates application of substitute equipment., • Reviews final adjustment of equipment and systems after installation., • Writes or contacts client directly except in controversial matters., • Ability to represent the firm at meetings and cover all trades, which may require further follow through., • Is assisted on projects by other engineers and/or designers., • Estimates workforce needs and schedules and assigns work to meet completion date and updates the project manager as to status and resources available., • Mentors and trains younger engineers and designers., • Preferably has a Professional Engineering License (P.E.) or Engineer-in-Training (E.I.T.) working toward P.E. Licensing., • Bachelor of Science or equivalent. Powered by JazzHR 1g9V9PMYEQ

Job DescriptionResponsibilities: • Must be able to read engineering technical drawings and use basic hand tools like digital calipers, etc., • Conduct quality control inspections throughout the production process, including first-article, in-process, and final pre-shipment inspections, • Perform visual (workmanship) evaluations and functional testing as applicable (measurements, assembly, etc.), • Verify packaging and labeling for accuracy and compliance, • Serve as an on-site third-party Quality Engineering Inspector, • Visually inspect and record all weld components of each product, • Manage and oversee additional inspectors assigned to your site, • Conduct technical sorts and/or rework as required by client specifications, • Provide timely, detailed inspection reports with photographic evidence of products, packaging, labeling, and any defects found, • Submit daily and weekly reports using Microsoft Word or Excel Skills & Experience Requirements: • Minimum of 3 years of experience in a quality-related position, • QC Engineer with an Electrical Inspection background is preferred, • Strong visual inspection skills, especially for weld components, • Ability to work independently with minimal supervision, • Familiarity with and adherence to ProQC and client site safety and operational guidelines, • Strong communication skills

Job Description PROCESS ENGINEER Celebrating over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses over 160 state-of-the-art CNC machines. With 50 high-speed 4-axis horizontal machines, we deliver exceptional efficiency and accuracy for intricate, multi-sided machining, allowing us to meet the most demanding production requirements with speed and precision. We are a trusted supplier across industries such as aerospace, defense, medical, energy, and power generation, recognized for our dedication to quality, safety, and innovation. At Precise Tool, we foster a collaborative work environment where employees are valued and supported. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join our team and be part of a company that combines cutting-edge technology with a commitment to excellence and employee success. JOB SUMMARY Under the direct supervision of the Engineering Manager, the Process Engineer is responsible for performing a variety of manufacturing processes and engineering functions. ESSENTIAL FUNCTIONS: • Write manufacturing processes and enter in Epicor software. Work with the engineering group on machine processes and tooling., • Interface with department supervisors and machinists on a regular basis., • Utilize customer supplied CAD files when available to process manufacturing plan., • Utilize CAD to create work holding and fixturing layouts., • Interface with CNC programmers., • Notify Tool Crib of upcoming jobs., • Develop queuing system for kits ready to set up., • Verify tooling is available for jobs and ensure back-ups are available., • Coordinate all projects as they progress through the shop., • Monitor profitability as jobs are running., • Expedite any materials and components for jobs to ensure jobs stay on schedule., • Complete routing for customer jobs., • Work with engineering group and manufacturing to develop tooling and fixturing concepts for all new work., • Update all processes during and after production., • Work with manufacturing to ensure processes are being followed, and to incorporate time saving methods when suggested., • Investigate and provide disposition on discrepant/quality issues for jobs assigned., • Review assigned jobs with department manager at hand-off and when ready to move to the floor., • With a quality work ethic, functions as a member of a customer-driven quality team whose goal is to ensure that product quality requirements established by the customer have been achieved., • Holds oneself accountable for doing whatever is needed to meet the commitments made around project outcomes., • Excellent written and oral communication skills., • Ability to work well under pressure, to adhere to deadlines and the ability to be flexible., • Familiarity with all aspects of manufacturing including material specifications, turning, milling, heat treat, welding, plating and painting., • Attention to detail., • Customer focus., • Analytical and reasoning skills., • Proficiency with 3-D modeling software packages, Autodesk Inventor., • High School Diploma or equivalent required, • College degree preferred, but not required, • 10 years of machining or manufacturing experience required, • Vacation, • Sick Days, • Paid Holidays, • Health Insurance, one plan is 100% employer paid!, • Dental Insurance, • Vision Insurance, • Life Insurance, also 100% employer paid!, • 401(k) Plan According to the New York Pay Transparency law, pay range for this job is $29.00 - $43.00 / hour. The actual compensation will be determined based on experience and other factors permitted by law. Precise Tool & Manufacturing Inc. is a Drug-Free Workplace. Employment is contingent upon the successful completion of a pre-employment drug screen. ITAR Restricted: This position is restricted to US Citizens, Permanent Residents or Green Card Holders EOE/AA Race/Color/Sex/Religion/National Origin/Disability/Veteran Precise Tool & Manufacturing Inc. is committed to providing a work environment that is free from unlawful discrimination and harassment in any form and will make reasonable accommodations for qualified individuals with disabilities unless doing so would result in an undue hardship. If you are interested in applying for employment and feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact Human Resources at (585) 247-0700 Ext. 203.

Job Description We are seeking a hands-on and technically driven Quality Engineer to support and strengthen our Quality and Engineering team within a precision CNC machining environment serving the aerospace and defense industries. This role requires strong analytical and problem-solving skills, a proactive floor presence, and the ability to bridge theoretical quality principles with real-time production support. The successful candidate will play a key role in driving continuous improvement, ensuring compliance with industry standards (AS9100, ISO9001, NADCAP), and mentoring quality personnel. Key Responsibilities: • Maintain a strong presence on the production floor to support real-time resolution of quality issues., • Guide operators through inspection procedures and troubleshooting quality concerns on the spot., • Conduct and support various inspection types, including:, • First-Piece, In-Process, Final, and Open Plate Inspections, • Source Inspections and First Article Inspections (FAI), • Oversee CMM operations and programming using Zeiss Calypso (required)., • Utilize precision measuring tools (micrometers, calipers, height gauges, comparators) to validate dimensional tolerances, finishes, and part conformity per GD&T., • Lead and document non-conformances (NCR/INCR), perform root cause analyses (RCA) using tools like 5 Whys, Fishbone Diagrams, FMEA, and develop CAPAs., • Assist with preparing and maintaining PPAP, FAIR, and other aerospace quality documentation., • Audit and ensure adherence to company procedures, quality systems, and regulatory compliance., • Support process control development and collaborate with operations to improve quality at the source., • Specify and order inspection gauges and oversee calibration and gauge control requirements., • Create user-friendly visual aids and inspection documentation for operator use., • Education:, • Bachelor’s degree in engineering, manufacturing, or related field with 3–6 years of quality engineering experience, • OR associate degree with 5+ years of progressive quality experience and strong understanding of quality principles. (Must Have)Required Technical Skills & Experience: * • Expertise in AS9100 (or AS9100D), aerospace quality compliance standards, is required, NADCAP is preferred, and ISO 9001 compliance is required., • Prior experience in aerospace precision CNC machining environments, required., • Proficiency in GD&T interpretation and aerospace blueprint reading, required., • Zeiss Calypso CMM programming experience (required), • Experience with ERP/MRP systems (Epicor preferred), • Familiarity with CAD/CAM models and software like Mastercam or PartMaker, required., • Experience conducting and documenting First Article Inspections (FAI), PPAP, and FAIR, required.

Job Description Position:Manufacturing/Production Engineer Reports to:Plant Manager Cannon Industries A global company with headquarters in Rochester, New York, Cannon Industries has grown to become one of the leading sheet metal and custom weld fabricators in the contract manufacturing industry. Our quality standards are unsurpassed in the industry because we know that our customers’ standards grow with each passing year. Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001, and TS:16949 certifications. Cannon Industries, Inc. is a drug, smoke and alcohol free working environment. General Job Description: Manage engineering and project management effort for the company. This includes scheduling and completing engineering tasks on time and within budget. Administer Engineering document control. Supervise, mentor and train subordinates. Communicate with customers and production to ensure conforming product. Plan and allocate jobs. Resolve conflicts to meet deadlines. Minimum Qualifications: • Excellent verbal and written communication skills, • Have a team player attitude that promotes commitment, reliability and follow through, • Detail oriented with strong organizational skills, • Proven record of strong leadership and motivational skills coupled with sound decision making capabilities, • Ability to resolve problems using logical, systematic and sequential approaches, • Good computer skills with a proficiency in Microsoft Word and Excel, • Strong knowledge of best practices, methods and techniques pertaining to building, facilities and equipment maintenance and repair, • A minimum of five years relevant experience, • Degree in Mechanical Engineering or other related field required Supervisory Specific Duties: • Voice all concerns while working with production staff, Quality Assurance, Engineering and Operations any and all current or potential problems affecting production., • Review all new project release packages to verify that customers’ specifications are achievable., • Participate in new product launch meetings, • Assist Quality Assurance with establishing inspection documents and procedures., • Recommend continuous improvements actions for improving work processes. Departmental Specific Duties: • Quoting/Cost Estimating including; developing a Bill of Materials (BOM) for purchasing to facilitate pricing inquiries, calculating material usages, etc., • Review all new project release packages to verify that customer’s specifications are achievable. Participate in new-product-launch meetings, • Responsible for developing the manufacturing process for all parts. Assist operators with questions and provide technical advice., • Work with Production to improve efficiency on new and existing jobs, • Drive process improvements to generate cost reduction ideas., • Monitor actual job cost vs quoted job cost, • Help write the process sheets (travelers) for each job, • Analyze and improve processes for time/cost efficiencies, • Establish and maintain “machine utilization status”, • Help to create new travelers and/or modify existing travelers as per post program evaluation meetings, • Design machining, welding, inspection and assembly fixtures, • Help provide technical direction to operators as needed, • Supervise tools, fixtures, etc. if need, • Maintain engineering drawing and program files, • Must collaborate with customers to achieve desired results, • Provide engineering support to meet production schedules This list of duties and responsibilities is not intended to be all-inclusive and may be expanded to include other duties and responsibilities as it may be deemed necessary.

Job DescriptionDescription: Job Title: Principal Optical Engineer Department: R&D – Optical Reports To: VP of Advanced Optics Work Location: Onsite-Hybrid Salary Range: $100,000 - $140,000 FLSA Status: Exempt Featured Benefits: Medical, Dental, Vision, 401(k), FSA/HSA, Patent Incentives, Tuition Assistance, PTO, Life & Long-Term Disability Insurance, and more. About Us: Founded in 1997, Vuzix (NASDAQ: VUZI) is a growing, dynamic company that specializes in the design, manufacture and sale of smart glasses and augmented reality (AR) technologies and products for the enterprise and consumer markets. Company products include wearable displays and computing devices that offer a portable, high-quality viewing experience for applications in augmented reality, digital information, utility, and entertainment. Position Summary: The Principal Optical Engineer will support R&D, new product development and production while directly reporting to the R&D/Optics group. It will be their responsibility to work within multidisciplinary teams to design, build and test optical mounting structures, alignment mechanisms and housings. They will be solely responsible for all reliability modelling and testing with respect to optical components and assemblies. This position will also support the functions of the R&D – Optical Department to meet the requirements of the relevant ISO 9001:2015 standards based on the quality objectives established by Top Management. Essential Duties and Responsibilities: • Oversee test lab and provide optical engineering expertise., • Establish test procedures, processes, and documentation., • Review and organize test data., • Subject expert for geometric optics, LED illuminators, backlights, conventional micro-displays, collimators and concentrators, holographic systems, optical interference coatings, injection molding, lens design, and high precision optics design, fabrication and assembly., • Research and understand human factors and implement intelligent design choices for head mounted display systems., • Generate complete system documentation and provide input to technical proposals to effectively communicate designs and/or approaches to internal and external customers., • Validate system performance to prove the technical design through analysis, simulation, and laboratory testing., • Ensure proper procedures and methods are used by other members of the design team by providing a value-added quality review., • Independently develop and implement corrective action to product and procedural problems., • Communicate with the customer suppliers, and internal management as the technical expert on projects to effectively interface with all facets of decision-making personnel and customer management. To perform this job successfully, an individual should demonstrate the following competencies: • Written Communication – Read and interpret written information effectively, write clearly and concisely, adapt writing style for different audiences., • Verbal Communication – Give focused attention to what others are saying, take time to understand what and respond when appropriate without interrupting, speak clearly and effectively express ideas and opinions, adapt and react professionally in both positive and negative situations., • Teamwork & Collaboration – Balance team and individual responsibilities, consider others’ views objectively and with openness to changing your own, give and encourage feedback, contribute to a positive team dynamic, prioritize team success over personal interests, work effectively across departments toward company goals., • Professionalism – Interact with others in a considerate manner, follow through on commitments, react well under pressure and preserve confidentiality, control emotions, and accept responsibility, maintain focus on solutions and treat others with respect and consideration regardless of their status or position., • Motivation & Initiative – Demonstrate persistence and ability to adapt to changes in daily workflow and overcome obstacles, ask for and offer help when needed, work independently when required, volunteer readily and look for ways to improve and create successful outcomes, positively contribute to overall work environment., • Minimum of 8 years of detailed experience working in a product design environment., • Strong organizational, time management, and leadership skills; and the ability to successfully manage multiple tasks in a dynamic environment., • Familiarity with MS Project., • Familiarity with optical measurement techniques., • Must be able to demonstrate out-of-box thinking for unique problems and develop concepts into products., • Master’s degree in Optical Engineering, Physics or equivalent., • Familiarity with sequential and non-sequential programs like Zemax, Code V, etc. Travel: Travel including international travel up to 25%, if possible. Physical Demands: Frequently required to sit, speak, hear, see, and perform repetitive motion (data entry). Occasionally required to lift or carry (10 lb. minimum). Reasonable accommodations will be made available if applicable.

Job Description Title Senior Thin Film Coating Engineer Department Coating Reports to Coating Manager SEE YOUR CAREER THROUGH A NEW LENS WITH RPO! RPO is a global leader in precision optics, optical components, and optical assemblies. We specialize in a full spectrum of products & services including – Design and Engineering, Systems Integration, Lens Assembly, Visible and Infrared Components, Glass and Plastic Molded Aspheres, and Thin Film Coating. As one of the fastest growing companies in the Rochester area, RPO offers exciting career paths to work on market-leading programs across a variety of industries. Job Summary: We are seeking a highly experienced and innovative Senior Thin Film Coating Engineer to lead the design, development, and optimization of advanced optical coatings for precision optics applications. This role is pivotal in supporting high-performance imaging systems, spectroscopy, aerospace, defense, and semiconductor technologies. This is an excellent opportunity for an energetic, forward-thinking individual to work in a fun, fast-paced environment. You Will: * Design and optimize complex thin film coatings (e.g., AR, beam splitters, bandpass filters) using industry-standard software (TFCalc, Macleod, FilmStar). * Lead development of coating processes using PVD technologies including magnetron sputtering, ion beam sputtering, and electron beam evaporation. * Collaborate with cross-functional teams to translate customer specifications into manufacturable coating solutions. * Perform spectral and interferometric measurements using spectrophotometers and other metrology tools. * Develop and maintain process documentation including FMEA, control plans, and PPAPs. * Troubleshoot coating defects and implement root cause corrective actions. * Mentor junior engineers and technicians; provide technical leadership across coating operations. * Support continuous improvement initiatives using Six Sigma, SPC, and Lean methodologies. * Interface with customers to present technical solutions and ensure product compliance. * Participate in Material Review Board (MRB) activities and disposition of discrepant materials. You Have: • Bachelor of Science in Optical, Electrical, or Mechanical Engineering, or alternatively a Bachelor of Science in Physics. 8–10 years of experience in optical thin film coating design and manufacturing. * Deep understanding of high vacuum systems, deposition physics, and thin film characterization. * Proficiency in coating design software and optical simulation tools. * Strong analytical and problem-solving skills; ability to manage multiple complex projects. * Excellent communication skills, both written and verbal. * Experience in low-volume, high-mix production environments is a plus. • Familiar with optical testing such as spectrophotometry, stress measurements, environmental testing and laser damage., • Excellent computer skills – Email, MS Word, MS Excel, ERP system, • Experience reading and interpreting technical drawings and engineering specs, • Proficiency in optical thin film deposition, optical monitoring, high vacuum technology, optical measurements, process controls and management., • Familiarity with most optical coating materials and their domain of application You Are: • Results-Oriented: Motivated, hard-working and ready to level-up;, • Curious: You never stop learning and have an insatiable desire to gain new skills and knowledge;, • Process Oriented: Well organized, demonstrating attention to detail;, • Analytical: Possess a “If there’s a problem, I’ll find a solution” attitude;, • Accountable: Demanding the highest quality from yourself and team members;, • Detail-Oriented: Have excellent time management and organizational skills;, • A Team Player: Reliable, collaborative, flexible with a positive ‘get things done’ attitude;, • A U.S. Person: Compliant with ITAR, EAR and other laws and regulations as defined: “U.S. citizens, lawful permanent residents ("Green Card" holders), persons granted refugee status or asylum status in the United States, or temporary residents granted amnesty.” You Will Enjoy: • Growth: The opportunity to learn and advance your career;, • Wealth: Competitive compensation package linked to your experience and performance, a 401(k) with company match;, • Wellness: Health, dental, vision & life insurance;, • Balance: 11 paid holidays, generous paid vacation and sick -time;, • Culture: an energetic, caring, fun, value-driven team. Environment & Physical Demands: • Professional office environment with routine use of standard office equipment such as computers, phones, copiers, filing cabinets and fax machine; noise level typical of a standard office environment, • Prolonged sitting, computer and telephone use, as well as standing, filing, bending, reaching and lifting and carrying up to 15 pounds, • Occasional exposure to manufacturing plant floor requiring the use of personal protective equipment (ear plugs, safety glasses, etc.) This job description reflects management’s assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned. The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Rochester Precision Optics is committed to leveraging the talent of a diverse workforce to create great opportunities for our business and our people. EOE/AA/Minority/Female/Disability/Veteran In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States, and to complete the required employment eligibility verification form upon hire.

Job Description Onsite Senior Mechanical Engineer needed for an 18-month contract to hire opportunity with Yoh’s client located in Rochester, New York. Pay Rate: $100- $120 per hour The Big Picture – Top Skills You Should Possess: • Solid interpersonal skills, • Strong analytical skills, • Responsible for mechanical design/packaging electronics, • Required to meet with project stake holders on a regular basis to understand technical issues and develop solutions, • Independently, develops and implements concepts for range of significantly complex product issues and engineering solutions, • Technically lead and/or execute engineering projects and spearhead research and development of new technologies, as appropriate, • Problem identification and troubleshooting a wide range of significantly complex engineering problems, • Specify or perform significantly complex engineering analysis, • Interface with internal and external customers regarding significantly complex engineering issues to address customers High Value Problems (HVP) for a range of products, • Generate product specifications, • Define, coordinate, perform, and document engineering tests, • Specify and review engineering documentation and engineering processes What You Need to Bring to the Table: • 10+ years of experience with a Bachelor of Engineering degree in Mechanical Engineering or related field, • A minimum of 7 years’ experience in mechanical engineering and design, • Experienced in 3D CAD systems (NX or Solidworks) and Teamcenter is preferred, • Hands-on experience with mechanical development and design of high voltage products, • Experience in analysis, testing, troubleshooting, diagnosing, and root-causing electro-mechanical systems Bonus Points! Otherwise Known As Preferred Qualifications: • Proficient in the use of MS Excel, Word, PowerPoint, and related software, • Good analytical and problem-solving skills with high attention to detail, • Be a team player and have the ability and self-motivation to learn quickly and independently, • Demonstrate strong technical leadership skills and a commitment to delivering high quality products while adhering to strict deadlines, • Foster an environment that welcomes and encourages new and innovative design concepts, inventions, patents, and product opportunities What’s In It For You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. • Medical, Dental & Vision Benefits, • 401K Retirement Saving Plan, • Life & Disability Insurance, • Direct Deposit & weekly e-payroll, • Employee Discount Programs, • Referral Bonus Programs What are you waiting for? Apply Now! Estimated Min Rate: $100.00 Estimated Max Rate: $120.00 What’s In It for You? We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include: • Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week), • Health Savings Account (HSA) (for employees working 20+ hours per week), • Life & Disability Insurance (for employees working 20+ hours per week), • MetLife Voluntary Benefits, • Employee Assistance Program (EAP), • 401K Retirement Savings Plan, • Direct Deposit & weekly epayroll, • Referral Bonus Programs Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Visit to contact us if you are an individual with a disability and require accommodation in the application process. For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment. Company DescriptionFounded in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations. Company Website: in 1940, Yoh operates from 75 locations throughout North America and is headquartered in Philadelphia, PA. Yoh was the nation’s first technology staffing firm. As a business unit of Day & Zimmermann, Yoh has a flourishing global footprint, as our parent company operates from more than 150 worldwide locations.\r\nCompany Website:

Job Description LaBella Associates is currently seeking an Electrical Engineer in our Rochester, NY office. Duties • Preparation of electrical design drawings, specifications, and reports, • Responsible for project construction (submittal review, construction observation, and punch lists), • Interact closely with mechanical, civil, structural engineers and project architects, • Prepare electrical design drawings using Revit and AutoCAD., • Perform lighting calculations and arc flash studies., • Perform field investigations to document existing conditions. Requirements • Building system design experience focused on power distribution, lighting, fire alarm, security systems & telecommunication, • Proficiency in Revit, AutoCAD, MS Excel and Word, • Familiarity with electrical modeling programs – Lighting software AGi32, Power software SKM, • Familiarity with Arc-Flash Evaluation, • Bachelor’s degree in electrical engineering, • Minimum 5 years engineering experience involving building systems projects, • Strong writing, organizational and communications skills, • Ability to work on several projects simultaneously, • On path towards New York PE license preferred, not required Salary Range: $75,000 - $105,000 The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Benefits Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job Description We are in search of a capable candidate to play a key role in a broad spectrum of projects, encompassing everything from large utility infrastructure projects and athletic fields to land development work and higher education facilities. This dynamic position involves direct engagement with clients in the public sector, offering the candidate a valuable opportunity to interact directly with them. The role requires versatility, as the candidate will contribute to projects with diverse scopes, showcasing their ability to navigate challenges across various disciplines. Duties • Plan and design large scale infrastructure, land development and athletic field projects., • Oversee and guide projects from initial concept through construction closeout., • Mentor and lead project team and direct reports, • Perform and review detailed hydraulic calculations., • Produce effective and high-quality project documents (including reports, drawings, and specifications), • Provide bidding and construction administration services., • Assist in the preparation of project proposals., • Communicate directly with and maintain client relationships. Salary Range: $65,000 - $90,000 per year The specific salary offered may be influenced by a variety of factors including but not limited to the candidate's relevant experience, education, and work location. Requirements • Bachelor’s Degree in Civil and/or Environmental Engineering, • 5+- years’ experience, • Registered as a Professional Engineer or ability to obtain license within 1-yr, • Track record of developing good working relationships with municipal, industrial, and/or institutional clients, • Effective communication skills using oral, graphic and written forms, • Ability to perform assigned tasks with minimal supervision, • Ability to travel to project sites and work remotely as needed, • Ability to manage workload and budgets as allocated Body, mind, and wallet—LaBella’s benefits support a holistic approach to your health and wellness, creating the foundation for physical, mental, and financial well-being. Our benefit offerings cover the must-haves (healthcare and retirement), the just-in-cases (insurances and employee assistance programs), and the cherry-on-tops (fitness reimbursements, year-end incentive pay, and tuition assistance). Visit our website for more details on benefits listed below. • Flexible Work Schedule, • Health/Dental Insurance, • 401k Plan with Employer Match, • Short & Long Term Disability, • Profit Sharing, • Paid Time Off, • Leadership Development Program, • Fitness Reimbursement, • Tuition Reimbursement, • Referral Bonus Program, • Wellness Program, • Team Building Events, • Community Service Events

Job DescriptionDescription: Fisher Associates, P.E., L.S., L.A., D.P.C. has created an internship program to engage college students that are ready to get their foot in the door and gain hands on experience! By using the skills and knowledge gained from academic study and combining with an internship, the student's transition from student to professional is enhanced. Students must be organized, self-motivated, and dependable. We have multiple sectors/service lines in which an internship can be completed as selected by the student. Under direct supervision, the student will perform routine tasks and work on a wide variety of projects gaining a well-rounded learning experience. Who: Students currently enrolled in a Civil Engineering degree program (or related field) What: Obtain hands-on professional work experience with our Transportation, Land Development or Energy groups in various tasks related to design, analysis, and implementation of projects. Where: At any of our office locations! When: Fisher Associates accepts internship applications year-round. Internship timeline is dependent on manager needs and student schedule. The primary function of this role is responsible for, but not limited to, the following: • Exhibit behaviors that align with the Fisher Values: Aspire to Excellence, Teamwork and Respect, Owning our Results and Empowered Employees., • Establish and maintain strong client relationships adhering to the Fisher Clientship philosophy., • Perform engineering analysis and design., • Prepare cohesive and organized engineering calculations., • Assist technical staff with day-to-day design tasks for several types of projects., • Conduct basic engineering functions including design calculations and cost estimating under supervision., • Collaborate as a member of the team to realize project deliverables and deadlines., • Prepare construction specifications under direct supervision., • Assist senior engineers or designers with organizing/preparing reports, studies, or bid packages., • Participate in site visits and field inspections to gather data and assess project conditions, as needed. Fisher Associates, P.E., L.S., L.A., D.P.C. is a consulting engineering and professional services firm serving the Transportation, Land Development and Energy market sectors. Our comprehensive services include landscape architecture, planning, engineering, environmental, survey, GIS and construction representation. Fisher Associates, P.E., L.S., L.A., D.P.C. is headquartered in Rochester NY, with eight offices throughout NY, PA and TX. The culture at Fisher is friendly, respectful, and a true team environment. We own our responsibilities and results, continuously seeking to improve and empower our employees. Requirements: Education & Experience • Currently pursuing a bachelor’s degree in Civil Engineering, Civil Engineering Technology or related field., • Strong academic performance in relevant coursework., • Aspire to excellence, consistently seek to improve, and demonstrate high quality work at all levels., • Team player: collaborate effectively at all levels; treat coworkers, clients and vendors with respect in all interactions; seek to listen effectively, understand others, and build trust., • Own and accept responsibility for results., • Honest, transparent, and trustworthy., • Proactive, self-motivated, and eager to learn., • Strong critical thinking and problem-solving skills., • Ability to consistently demonstrate sound judgement., • Excellent and professional communication skills both written and verbal., • Excellent organizational, project management and time management skills., • Ability to work in a fast-paced environment and manage multiple tasks simultaneously., • Strong attention to detail., • Exhibit flexibility with assignments, workflow, or project changes., • Listen and respond to feedback in a positive manner. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Prolonged periods sitting at a desk and working on a computer., • Must be able to lift to 15 pounds at a time., • Must be able to travel to various project sites., • Must be able to access and navigate construction sites and job areas., • Ability to transverse uneven grounds. Salary Range: $23/hour Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. Fisher Associates embraces a family-feel culture and welcomes all newcomers with open arms. Fisher Associates does not discriminate in hiring or employment on the basis of age, race, creed, color, national origin (including ancestry), religion, gender or sex, sexual orientation (including transgender status, gender identity or expression), pregnancy (including childbirth, lactation, and related medical conditions), disability, reproductive health decision making (including, but not limited to, the decision to use or access a particular drug, device, or medical service), marital status, partnership status, caregiver status, domestic violence victim status, familial status, military status, unemployment status, genetic information (including genetic characteristics), citizenship or immigration status, or any other protected status under federal, state, or local laws.

Job DescriptionDescription: Are you ready to take the next step in your project management career? Fisher Associates is seeking a motivated Transportation Project Manager with a strong foundation in civil engineering, infrastructure design, and quality control to join our growing team. In this role, you’ll play a key part in ensuring the technical accuracy, functional quality, and creative problem-solving that define our project success. You’ll work collaboratively with internal teams and directly with clients—managing deliverables, maintaining client satisfaction, and driving projects forward from concept through completion. If you're passionate about project delivery, client service, and continuous improvement, we want to hear from you. Join a firm where your voice matters and your growth is a priority. Ready to join us? Apply today and start leading projects that shape your community. About Fisher Associates Fisher Associates is a multidisciplinary design services firm headquartered in Rochester, NY, with eight locations nationwide. The firm provides civil/site engineering, transportation engineering, electrical engineering, landscape architecture, architecture, planning, environmental, surveying, GIS, construction inspection, precast engineering and construction engineering services to public and private sector clients across numerous markets. Why You’ll Love Working at Fisher • You are empowered to achieve exceptional results through collaboration and ownership., • Your voice matters in our inclusive and transparent culture, where accessible leadership genuinely welcomes ideas and feedback., • Your growth is our priority. We offer clear career paths, tuition assistance, and ongoing learning opportunities to support your development., • You thrive in a culture that celebrates fun and fosters a relaxed, easy-going atmosphere, so you can bring the best of yourself to work every day., • Your journey is shaped by a culture of mentorship, where experienced colleagues guide your growth and you, in turn, inspire others., • Collaborate with internal teams, clients, subconsultants and agencies to ensure seamless project delivery., • Successfully lead projects from initial setup through planning, safety analysis, and project kick-off., • Manage project budgets, scope, schedule, and staffing to stay on plan., • Oversee project billing, client updates, QA/QC of deliverables, and project closeout., • Lead transportation design projects, ensuring compliance with industry, regulation, and safety standards., • Support the preparation of project proposals by collaborating with senior staff and technical teams., • Coordinate with design teams to develop detailed plans, specifications, drawings and bid packages., • Perform technical reviews and provide guidance to resolve design challenges., • Manage a project team, fostering a collaborative and productive work environment., • Assign tasks, monitor progress, and provide guidance to ensure project milestones are met. Your Impact Matters, Your Career Thrives. Work on engaging transportation engineering projects and experience first-hand the positive changes you create in your own community. Engage in diverse and challenging project opportunities that will help you grow and advance your career. We offer competitive salaries and benefits, including: • Medical, Dental & Vision Insurance, • 401(k) Plan, • Company-paid Life and Disability Insurance, • Hybrid Work Schedule, • Generous PTO and Paid Holidays, • Strong Work-life Balance, • Shareholders Program, • Professional Development Opportunities and Reimbursement, • Supplemental Benefits Designed for Total Well-being and Financial Security Actual compensation may vary based on relevant experience, qualifications/education, and other factors. The salary range is not necessarily reflective of the actual total compensation that may be earned nor promises any specific pay for any specific employee. Salary range excludes monetary value of benefits. #LI-Hybrid Requirements: What You Bring, Your Expertise as a Transportation Project Manager • B.S. degree in Civil Engineering, Master’s preferred, • 10+ years transportation design engineering and project management experience, • Ability to manage transportation projects including highways, structures and traffic., • Professional Engineering License (PE) preferred or ability to obtain it, • Proven Client relationship and business development experience, • Proficiency in MS Office programs and MicroStation (preferred), • Familiarity with state DOT design standards (NYSDOT or PennDOT preferred), • Professional performance standards aligned with Fisher’s Mission, Vision, and Core Values, • Demonstrated high-quality work and ability to problem solve applying critical thinking, and sound judgment to challenges, • Driven to take ownership of projects, prioritize tasks effectively, and thrive in a dynamic, fast-paced environment that fosters personal and professional growth, • Highly adaptable and proactive in meeting deliverables and deadlines, • Dedicated to fostering trust and collaboration through integrity, respect, and active listening in client and team relationships, • Have a sense of curiosity, always looking for a better way, and a continuous improvement mindset