Engineering jobs in Houston, TexasCreate job alerts

Job Description Job Description: This position is responsible for performing tests and troubleshooting products to ensure production and quality standards are met. Duties and Responsibilities: • Perform testing and final level debugging for production., • Troubleshoot and repair failures; diagnose root cause and recommend corrective action., • Responsible for the procurement, maintenance, troubleshooting, and improvement of test equipment., • Assist Test Engineers with NPI (new product introduction) test station setup and other processes including modeling, pre-pilot, and pilot runs., • Train Repair Technicians and Testers on new and existing testing procedures and product troubleshooting., • Analyze test correlation of RMA (return merchandise authorization) fallout and work with vendors to follow up with FA (failure analysis) results., • Report ORT (on-going reliability tests) and RDT (reliability demonstration tests) and escalate issues to Test Engineers., • Monitor and maintain testing station performance., • May rework products as a result of testing issues., • Must have hands-on experience in computer hardware repair, troubleshooting, and installation, • Excellent communication (written and verbal) skills, • Knowledge of general programming languages, such as C/C++, Pearl, Java, and Labview, preferred, • Must have a strong customer service/satisfaction attitude, • Must have the ability to work in a fast-paced, high-pressure manufacturing environment, • Bachelor’s degree in Computer Engineering, Electrical Engineering or Computer Science preferred. Associate’s degree with 2 years of manufacturing test experience will be considered., • 2 years of manufacturing test experience preferred., • 3+ years of software/test development experience preferred., • Experience with network product installation (routers, switches) is a plus. Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR ptLYdzgHC9

Job DescriptionPurpose of the position1, Yield improvement for critical process, include SMT and UF process; 2, Development and optimization of production management system; 3, Creation and validation of standardized operating procedures; 4, Process development and troubleshooting;Duties and Responsibilities • Develop and validate SMT stencil base on customer documents;, • Establish operation standards for each workstation,Improve training documents, analyze SMT defects through big data stratification,, • Analysis of SMT process defect, identify root causes of issues, develop effective corrective actions, and timely report results to senior management and customers;, • Verify that the device parameters are defined to meet the customer requirements, • Trained operators to standardize processes;, • Propose new design concept solution and provide technical support for the MP issue fix;Education and work experience :4-years of high school or Associate degree or higher academic qualifications, • Possess one of the following experiences preferred, • More than 3 years of process improvement experience, • Experience in SMT technology development and new product introduction within the industry, • Join a high-growth, innovation-driven team shaping next-gen consumer electronics., • Be part of diverse, bilingual team with strong cross-Pacific collaboration. Skills:, • Flexible application of Cam350 & CAD software;, • Familiar with SMT technology or UF technology, have SMT DFM capability, rQL4JWxqN3

Additional Information Job Number26015947 Job CategoryEngineering & Facilities LocationThe Westin Galleria Houston, 5060 W Alabama St, Houston, Texas, United States, 77056 ___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing globalteam, and become the best version of you.

Additional Information Job Number26015947 Job CategoryEngineering & Facilities LocationThe Westin Galleria Houston, 5060 W Alabama St, Houston, Texas, United States, 77056 ___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing globalteam, and become the best version of you.

Additional Information Job Number26015947 Job CategoryEngineering & Facilities LocationThe Westin Galleria Houston, 5060 W Alabama St, Houston, Texas, United States, 77056 ___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing globalteam, and become the best version of you.

Additional Information Job Number26002320 Job CategoryEngineering & Facilities LocationThe Westin Galleria Houston, 5060 W Alabama St, Houston, Texas, United States, 77056 ___ SchedulePart Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Monitor and inspect boiler equipment, computer terminals, switches, valves, gauges, alarms, safety devices, and meters. Maintain water, chemical, and fuel levels in boilers, adjust supplies of combustion air, and control the flow of fuel. Fire gas- or oil-fed boilers using automatic gas feeds or oil pumps. Test, record, and take corrective action for water quality. Install, maintain, and perform preventative maintenance on appliances, electronics, and equipment. Maintain daily logs of operation, maintenance, and safety activities, including test results, instrument readings, and details of equipment malfunctions. Report serious maintenance problems, accidents, or safety hazards to manager/supervisor. Maintain and conduct daily inspections of the mechanical plant. Assist local authorities with emergency and natural disaster situations. Follow all company and safety and security policies and procedures, and complete safety training and certifications. Protect company assets. Anticipate and address guests’ service needs and assist individuals with disabilities. Speak with others using clear and professional language. Develop and maintain positive working relationships with others. Ensure adherence to quality expectations and standards, and identify, recommend, develop, and implement new ways to increase organizational efficiency, productivity, quality, safety, and/or cost-savings. Move, lift, carry, push, pull, and place objects weighing less than or equal to 75 pounds without assistance. Move through narrow, confined, or elevated spaces; up and down a ladder; down stairs and/or service ramps. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Perform other reasonable job duties as requested by Supervisors. PREFERRED QUALIFICATIONS Education: Technical, Trade, or Vocational School Degree. Related Work Experience: At least 1 year of related work experience. Supervisory Experience: No supervisory experience. REQUIRED QUALIFICATIONS License or Certification: Stationary Engineer/Boiler Operator License Driver's License At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing globalteam, and become the best version of you.

Additional Information Job Number26015947 Job CategoryEngineering & Facilities LocationThe Westin Galleria Houston, 5060 W Alabama St, Houston, Texas, United States, 77056 ___ ScheduleFull Time Located Remotely?N Position Type Non-Management POSITION SUMMARY Respond and attend to guest repair requests. Communicate with guests/customers to resolve maintenance issues with little to no supervision. Perform preventive maintenance on tools and equipment, including cleaning and lubrication. Visually inspect tools, equipment, or machines. Carry equipment (e.g., tools, radio). Identify, locate, and operate all shut-off valves for equipment. Maintain maintenance inventory and requisition parts and supplies as needed. Assure each day’s activities and problems that occur are communicated to the other shifts using approved communication programs and standards. Display advanced ability to read standard blue prints and electrical schematics concerning plumbing and HVAC. Display above average engineering operations skills and strong general mechanical ability. Display proficiency in at least three of the following categories, above average skills in three more of the following categories and basic skills in the remaining categories: air conditioning and refrigeration, electrical, mechanical, plumbing, pneumatic/electronic systems and controls, carpentry and finish skills, kitchen equipment, vehicles, energy conservation, and/or general building management. Display solid knowledge and skill in the safe use of hand and power tools and other materials required to perform repair and maintenance tasks. Safely perform highly complex repairs of the physical property, electrical, plumbing and mechanical equipment, air conditioners, refrigeration and pool heaters - ensuring all methods, materials and practices meet company standards and Local and National codes - with little or no supervision. Troubleshoot and perform repairs on all types of equipment (e.g., pump and motor replacement), plumbing (e.g., plunge toilets and unclog drains), electrical equipment including lamps, air conditioners, HVAC equipment, cosmetic items, extension cords, vacuum cleaners, internet devices, replace electrical switches and outlets, and program TV's. Use the Lockout/Tagout system before performing any maintenance work. Display advanced knowledge of all engineering computer programs related to preventative maintenance, energy management, and other systems, including devices that interact with such programs. Perform advanced troubleshooting of hotel Mechanical, Electrical, and Plumbing (MEP) systems. Display the ability to train and mentor other engineers as necessary. Display ability to perform Engineer on Duty responsibilities, including readings and rounds. Follow all company and safety and security policies and procedures; report any maintenance problems, safety hazards, accidents, or injuries; complete safety training and certifications; and properly store flammable materials. Ensure uniform and personal appearances are clean and professional, maintain confidentiality of proprietary information, and protect company assets. Welcome and acknowledge all guests according to company standards, anticipate and address guests’ service needs, assist individuals with disabilities, and thank guests with genuine appreciation. Adhere to quality expectations and standards. Develop and maintain positive working relationships with others, support team to reach common goals, and listen and respond appropriately to the concerns of other employees. Speak with others using clear and professional language. Move, lift, carry, push, pull, and place objects weighing less than or equal to 50 pounds without assistance and heavier lifting or movement tasks with assistance. Move up and down stairs, service ramps, and/or ladders. Reach overhead and below the knees, including bending, twisting, pulling, and stooping. Enter and locate work-related information using computers. Perform other reasonable job duties as requested. PREFERRED QUALIFICATIONS Education: High school diploma or G.E.D. equivalent and vocational or technical background. Related Work Experience: Extensive experience and training in general maintenance, electrical or refrigeration, parts inventory and requisition, exterior and interior surface preparation and painting. At least 2 years of hotel engineering/maintenance experience. Supervisory Experience: No supervisory experience. License or Certification: Valid Driver’s License REQUIRED QUALIFICATIONS Universal Chlorofluorocarbon (CFC) Certification Must meet applicable state and federal certification and/or licensing requirements. At Marriott International, we are dedicated to being an equal opportunity employer, welcoming all and providing access to opportunity. We actively foster an environment where the unique backgrounds of our associates are valued and celebrated. Our greatest strength lies in the rich blend of culture, talent, and experiences of our associates. We are committed to non-discrimination on any protected basis, including disability, veteran status, or other basis protected by applicable law. At Westin, we are committed to empowering guests to regain control and enhance their well-being when they need it most while traveling, ensuring they can be the best version of themselves. To achieve the brand mission of becoming the preeminent wellness brand in hospitality, we need passionate and engaged associates to bring the brand’s unique programming to life. We want our associates to embrace their own well-being practices both on and off property. You are the ideal Westin candidate if you are passionate; you are active and take pride in how you maintain your well-being; you are optimistic; you are adventurous. Be where you can do your best work, begin your purpose, belong to an amazing globalteam, and become the best version of you.

Powell is a dynamic and innovative company that values collaboration, technical excellence, and professional growth. As an Electrical Engineer, you will elevate your career and make a significant impact by leading projects that craft cutting-edge solutions for diverse clients. At Powell, an Electrical Engineer holding a minimum of a bachelor’s degree in electrical engineering, or a related engineering discipline with a focus on power and or control systems, will be the “technical face” on projects from concept to completion. You will be working with clients to design custom PLC, SCADA, HMI, RTU, and relay control panels to meet their technical specifications and quality standards within the constraints of the budget and the schedule. Additionally, an Electrical Engineer will learn industry standards and trends. Finally, you will join a team that fosters a supportive environment, continuous learning and development where your expertise will not only be appreciated but recognized and rewarded. Essential Responsibilities • Design standard jobs with guidance to match client specifications and requirements, • Draft electrical construction drawings using AutoCAD in conjunction with our wiring teams, • Gain design knowledge to engineer various control and relay panels, • Work with your Supervisor and the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project, • Create and validate Bills of Materials for client submittal and approval per Powell Standards, • Complete self-design reviews to verify accuracy and completeness of designs before issuing projects to Powell’s manufacturing floor for construction, • Gain the ability to provide technical support in client meetings, • Coordinate with purchasing and suppliers to specify & approve component parts and assemblies, • Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule, • Coordinate with the electrical design team for the final design and construction package to include schematics and wiring diagrams of the project, • Create AC and DC schematics, door component layouts, wiring diagrams, and communication drawings for project approval, construction and As-Built’s drawing submittals, • Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project, • Assist fellow production engineers in solving problems on a daily basis, • Adhere to Powell’s policies and procedures, work instructions, ISO policies, Safety Rules and Regulations, • Meet regularly with clients, suppliers and OEMs Required Experience Is Proportionate With the Selected Job Level • The Engineer level requires a Bachelor’s degree in an engineering discipline and 0-3 years of relevant job related experience, • The Senior Engineer level requires a Bachelor’s degree in an engineering discipline and 4-8 years of relevant job related experience, • BS Degree in Electrical Engineering, Electrical Technology or related area, • Minimum 1-3 years of experience in an Engineering role, • Ability to draft in AutoCAD, • Proficient with electrical design in PLC, SCADA, and relay control panels, • Previous experience with control panels Skills, Abilities & Other Requirements • Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment, • Solid organization, communication, presentation and planning skills, • Ability to carry out engineering development types of tasks and address production issues, • Demonstrated ability to work collaboratively with others in a cross-functional team environment, • Strong problem-solving skills, and the ability to troubleshoot system-level problems, • Basic understanding of communication drawings and point to point wiring diagrams, • Basic understanding to being very proficient with power distribution equipment (switchgear relays, PCR, E-Houses, etc.), • Able to apply applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL in day-to-day activities, • Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product, • Possess a strong customer service commitment, • The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally there may be some work performed in the field with exposure to construction sites or active customer facilities., • It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

A Senior Electrical Engineer is responsible for designing, developing, and testing electrical systems and equipment. They oversee projects, provide technical expertise, and ensure compliance with industry standards and regulations. They may also collaborate with other engineers and professionals to solve complex electrical problems, conduct research, and implement innovative solutions. A Senior Electrical Engineer typically has extensive experience in electrical engineering and may supervise and mentor junior engineers in their team. Essential Responsibilities • Independently complete standard projects to match client specifications and requirements, • Draft electrical construction drawings using AutoCAD in conjunction with our in-house mechanical and wiring teams, • Apply design knowledge to engineer 480V through 5kv Motor Control, and 480V through 38kV Switchgear along with other miscellaneous equipment, • Work with the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project, • Create and validate Bills of Materials for client submittal and approval, • Complete self and peer design reviews to verify accuracy and completeness of designs before issuing projects to Powell’s manufacturing floor for construction, • Mentor junior engineers in their team, • Provide technical support in client meetings, • Coordinate with purchasing and suppliers to specify & approve component parts and assemblies, • Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule, • Coordinate with the electrical design team, and the mechanical engineering team for the final design and construction package to include wiring diagrams, one-line diagrams, three-line diagrams, control schemes, and mechanical layouts of the project, • Create AC and DC schematics, door component layouts, wiring diagrams, and one-line diagrams for project approval, construction and As-Built’s drawing submittals, • Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project, • Assist fellow production engineers in solving problems on a daily basis, • Adhere to Powell’s policies and procedures, work instructions, ISO policies, Safety Rules and Regulations, • The Engineer level requires a Bachelor’s degree in an engineering discipline and 0-3 years of relevant job related experience, • The Senior Engineer level requires a Bachelor’s degree in an engineering discipline and 4-8 years of relevant job related experience BS Degree in Electrical Engineering, Electrical Technology or related area Minimum 4-8 years of experience in an Engineering role Advanced drafting/ACAD skills Proficient in electrical SWGR design and control schemes. Proficient in understanding power systems and relay applications as applied to switchgear products Skills, Abilities & Other Requirements • Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment, • Solid organization, communication, presentation and planning skills, • Experience in carrying out engineering development types of tasks and addressing production issues, • Demonstrated ability to work collaboratively with others in a cross-functional team environment, • Highly self-motivated in working on “first-of-its-kind” projects that require resilience and tenacity, • Strong problem-solving skills, and the ability to troubleshoot complex system-level problems, • Solid understanding of one-line and three-line drawings, control schematics, and point to point wiring diagrams, • Familiarity with power distribution equipment (three phase systems, relays, transformers, control switches, etc.), • Good understanding of 480V through 38kV electrical distribution and switchgear operation, • Familiar with applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL, • Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product, • Possess a strong customer service commitment, • The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities., • It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

We are currently seeking a motivated individual to be a part of our growing Powell Automation Division (PAD). This exciting position allows the ability to not only grow professionally but also fuel the future presence of PAD in the automation space! As a member of PAD you will work and collaborate with diverse professionals to apply innovative and creative solutions to solve problems for our clients. Key responsibilities include engineering, testing, maintaining and supporting automation solutions as well as intelligent products in MV/LV switchgear applications. Essential Responsibilities • Become proficient in PAD solutions and offerings, • Review and interpret client specifications to produce project Functional Design, drawings and test documentation in accordance with the project requirements and Powell standard procedures., • Develop relay configuration files using various manufactures such as SEL, GE, Siemens and Beckwith., • Design and configure SCADA systems using WonderWare InTouch, Allen Bradley Factory Talk, Copa-Data Zenon, Siemens WinCC, and/or SEL RTAC AcSELerator Diagram Builder, • Use common industrial communication protocols such as Modbus (RTU and TCP/IP), IEC61850, DNP 3.0, etc., • Develop PLC based electrical system monitoring and controls solutions., • Participate in and develop documentation for factory and on-site acceptance testing (FAT and SAT respectively), as well as perform start-up and commissioning activities as required, • Ensure that the company’s Health, Safety & Environmental policies and procedures are constantly adhered to all aspects of Site Services., • BS in a technical discipline, preferably an Electrical Engineer, from an accredited institution with a minimum of four (4) + years of relevant work experience, • Expertise and experience in at least one of the following is required:, • Automation and Control systems, • Protective Relay programming and commissioning, • PLC applications for Switchgear, • Experience developing, integrating, installing, and commissioning industrial control systems using PLC and HMI solutions., • Experience with PLC logic programming and HMI programming. Experience with Rockwell, Schneider, Siemens, and ABB software a plus, • Experience with common industrial protocols such as Modbus (RTU and TCP/IP), IEC61850, DNP3, Profibus, etc., • Knowledge of 3 phase power is required, • Excellent customer relation, verbal, and written communication skills, • Strong analytical and trouble shooting skills, • Able to work effectively in a team setting or independently, able to adapt to change, self-starter, innovative, and willing to make a difference, • Able to mentor less experienced engineers This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

A Senior Electrical Engineer is responsible for designing, developing, and testing electrical systems and equipment. They oversee projects, provide technical expertise, and ensure compliance with industry standards and regulations. They may also collaborate with other engineers and professionals to solve complex electrical problems, conduct research, and implement innovative solutions. A Senior Electrical Engineer typically has extensive experience in electrical engineering and may supervise and mentor junior engineers in their team. Essential Responsibilities • Independently complete standard projects to match client specifications and requirements, • Draft electrical construction drawings using AutoCAD in conjunction with our in-house mechanical and wiring teams, • Apply design knowledge to engineer 480V through 5kv Motor Control, and 480V through 38kV Switchgear along with other miscellaneous equipment, • Work with the Project Management team to help interpret project write-ups, client specifications, drawings, and other correspondence during the life of the project, • Create and validate Bills of Materials for client submittal and approval, • Complete self and peer design reviews to verify accuracy and completeness of designs before issuing projects to Powell’s manufacturing floor for construction, • Mentor junior engineers in their team, • Provide technical support in client meetings, • Coordinate with purchasing and suppliers to specify & approve component parts and assemblies, • Provide prompt notification to supervisor and project management for issues that impact scope, budget, and schedule, • Coordinate with the electrical design team, and the mechanical engineering team for the final design and construction package to include wiring diagrams, one-line diagrams, three-line diagrams, control schemes, and mechanical layouts of the project, • Create AC and DC schematics, door component layouts, wiring diagrams, and one-line diagrams for project approval, construction and As-Built’s drawing submittals, • Provide technical support as necessary for sales, application engineering, and inspection teams throughout the life of the project, • Assist fellow production engineers in solving problems on a daily basis, • Adhere to Powell’s policies and procedures, work instructions, ISO policies, Safety Rules and Regulations, • The Engineer level requires a Bachelor’s degree in an engineering discipline and 0-3 years of relevant job related experience, • The Senior Engineer level requires a Bachelor’s degree in an engineering discipline and 4-8 years of relevant job related experience BS Degree in Electrical Engineering, Electrical Technology or related area Minimum 4-8 years of experience in an Engineering role Advanced drafting/ACAD skills Proficient in electrical SWGR design and control schemes. Proficient in understanding power systems and relay applications as applied to switchgear products Skills, Abilities & Other Requirements • Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment, • Solid organization, communication, presentation and planning skills, • Experience in carrying out engineering development types of tasks and addressing production issues, • Demonstrated ability to work collaboratively with others in a cross-functional team environment, • Highly self-motivated in working on “first-of-its-kind” projects that require resilience and tenacity, • Strong problem-solving skills, and the ability to troubleshoot complex system-level problems, • Solid understanding of one-line and three-line drawings, control schematics, and point to point wiring diagrams, • Familiarity with power distribution equipment (three phase systems, relays, transformers, control switches, etc.), • Good understanding of 480V through 38kV electrical distribution and switchgear operation, • Familiar with applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL, • Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product, • Possess a strong customer service commitment, • The employee typically performs duties in a normal office environment. There will be some work in a shop environment and exposure to the elements of our shop. Additionally, there may be some work performed in the field with exposure to construction sites or active customer facilities., • It is the policy of Powell Industries to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents. This job description outlines the essential functions of the job and does not contain a comprehensive list of all possible responsibilities, tasks, and duties #LI-BH3 In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

Lead development and validation of new product designs from concept to full production, as well as continuation engineering on existing product lines. • Proposes new concepts for new product lines., • Investigates patentable concepts., • Proposes new complex level designs., • Directs and may assist in the assembly of initial prototype products., • Determines and specifies design parameters, validates according to standards, prepares required documentation., • Develops test programs for inside and outside labs., • Successfully plans, implements, completes, and documents projects., • Directs lab testing, analysis of data, creates corrective action plan., • Active participation and facilitation in Product Development Process., • Interfaces with outside vendors, consultants, and customers., • Understands and enforces regulatory document requirements., • Actively collaborates with other departments as required by project tasks. Job Requirements • BS Degree in Engineering or related area., • Minimum 0-4 years of experience in an Engineering role., • 10 yrs with degree., • 20 yrs without degree., • PE License preferred., • Advanced degree (MS, PhD) preferred., • Awarded Patents or Patent Applications preferred., • Published Trade, Peer reviewed, white paper preferred., • Advanced complex computer skills using Oracle, MS Office and MS Project., • Demonstrated knowledge of switchgear and controlgear., • Advanced knowledge of drafting/CAD skills and analysis tools., • Advanced knowledge of ANSI Y 14.5., • Advanced knowledge of materials science., • Advanced knowledge of metal forming, machining and finishing., • Advanced knowledge of casting and molding., • Advanced project management and organizational skills on multiple projects., • Advanced knowledge of regulatory standards (ANSI, IEEE, IEC), • Demonstrated verbal and written communication skills., • Demonstrated complex analytical and problem solving ability., • Create unique designs and solutions., • Able to lead change and respond to strategic and tactical changes., • Able to prioritize and manage time effectively. (self-motivated and self-managing)., • Advanced participation in a professional society preferred., • Attend in house and outside training sessions., • Learn policies and procedures, work instruction, ISO policies, Safety Rules and Regulations, and vendor products., • Perform other related duties as assigned. In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

Powell is hiring a Senior Manufacturing Engineer in Southeast Houston! Our Manufacturing Engineers are the process owners that design and improve processes and procedures used for the manufacturing of Powell engineered to order products. This position is required to identify and implement processes that improve the safety, quality, and operating efficiency in a manner that supports the objectives of the Business Unit. Posted position does not allow for sponsorship or relocation assistance. Position Summary • Evaluates manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials; conferring with equipment vendors; soliciting observations from operators., • Develops manufacturing processes by studying product requirements; researching, designing, modifying, and testing manufacturing methods and equipment; conferring with equipment vendors., • Improves manufacturing efficiency by analyzing and planning workflow, space requirements, and equipment layout., • Assures product and process quality by designing testing methods; testing finished- product and process capabilities; establishing standards; confirming manufacturing processes., • Provides manufacturing decision-making information by calculating production, labor, and material costs; reviewing production schedules; estimating future requirements., • Prepares product and process reports by collecting, analyzing, and summarizing information and trends., • Provides manufacturing engineering information by answering questions and requests., • Maintains product and company reputation by complying with government regulations., • Keeps equipment operational by coordinating maintenance and repair services; following manufacturer's instructions and established procedures; requesting special service., • Maintains product and process data base by writing computer programs, entering data., • Completes design and development projects by training and guiding technicians., • Maintains professional and technical knowledge by attending educational workshops; reviewing professional publications; establishing personal networks; participating in professional societies., • Contributes to team effort by accomplishing related results as needed. Job Requirements • BS Degree in Manufacturing or Industrial Engineering., • Minimum 3-5 years of experience in a Manufacturing Engineer role., • Demonstrated proficiency with computer skills using Oracle and MS Office Suite., • Demonstrated success with specifying, implementing, and manufacturing equipment., • Demonstrated mechanical aptitude., • Advanced knowledge using drafting/CAD skills with the ability to create and modify Factory Layouts., • Knowledge of ISO 9001 Quality System., • Experience with either the Toyota Production System or Lean Manufacturing., • Project Management experience, leading multi-disciplined teams., • Proven track record of completing process improvements from conception through final implementation and ramp-up., • Familiar with statistical test procedures and corrective action techniques., • Excellent mechanical and electrical systems aptitude. Understanding of pneumatic, hydraulic, and servo positioning systems, as well as, and machine controls., • Project involvement and organizational skills to handle multiple priorities., • Demonstrated written and verbal communication skills., • Demonstrated simple analytical and problem-solving ability., • Ability to implementing designs and solutions., • Able to follow directed instruction., • Able to lead change and respond to tactical changes., • Able to prioritize and manage time effectively. (Self-motivated and self-managing)., • Attend in house and outside training sessions., • Learn policies and procedures, work instruction, ISO policies, Safety Rules and Regulations, and vendor products. #LI-CAB In our 75+ year history, Powell has always known that our employees are at the heart of our success. Without question, we have the most talented people in all parts of our organization. As a manufacturer, we recruit and hire experienced and knowledgeable applicants to ensure our product is engineered, fabricated, and assembled to customer specifications! Powell’s culture has and will always be founded in our "can do" attitude. If we can imagine it, we can do it. Become a part of our story and let us help you write yours. Hard work pays off in all our teams, with opportunity for advancement and promotion without sacrificing work-life balance. Successful candidates must have a legal authorization to work in the United States on a full-time basis, with only those candidates selected for interview contacted. Powell offers comprehensive health insurance for you and your family, 401k savings, annual bonus potential, generous paid time off, professional development opportunities, company-sponsored wellness programs, and a collaborative work environment. EOE Protected Veterans/Disability If you need an accommodation in the hiring process, you may contact 713.378.2685. Application status inquiries will not be accepted in this manner.

Job Description Looking for Houston as well as Dallas/Ft Worth area Methods Machine Tools, Inc. supplies high-quality, high-precision machine tools and automation solutions, and designs integrated custom machining processes and systems. Headquartered in Sudbury, Mass., and in operation since 1958, Methods provides an end-to-end portfolio of best-in-class products, engineering, service, parts, training, and integration. Methods has more than 300 employees, nine technology centers, one high precision machining center, and has installed in excess of 45,000 machines throughout North America. We currently have the following career opportunity available reporting into our Houston, TX office. More about this location. POSITION OVERVIEW We are seeking an experienced Field Service Technician to diagnose, repair, and maintain CNC milling and turning machines at customer facilities. This role involves both mechanical and electrical troubleshooting, requiring a solid understanding of mechanical systems, CNC controls, and electro-mechanical assemblies. The ideal candidate is self-motivated, customer-focused, and has a proven ability to work independently while delivering exceptional service. Benefits: • A long history of stability and growth, • Excellent compensation, • Diagnose and repair CNC milling and turning machines at customer locations., • Troubleshoot and repair automatic tool changers, pallet systems, spindles, and turret mechanisms., • Perform ball screw and axis support bearing replacements and alignments., • Repair and align hydraulic and pneumatic systems., • Troubleshoot electrical and electronic systems, including CNC controls and electro-mechanical assemblies., • Read and follow ladder and wiring diagrams to diagnose issues., • Utilize tools such as digital multimeters, ohmmeters, and phase checkers for troubleshooting., • Ability to lift up to 50 lbs., • Perform physical tasks such as bending, twisting, and crawling., • Climb step ladders up to 8 feet. Applicant should have a minimum of 5 years of experience in CNC field service and knowledge of Fanuc controls. CNC programming experience is a plus. • Strong verbal and written communication skills., • Proficiency in Microsoft Office Suite., • Ability to stay calm and professional during stressful situations., • Self-motivated with the ability to work independently., • Strong mechanical aptitude, with experience in CNC repair., • Proficient in reading mechanical drawings, part prints, ladder diagrams, and wiring schematics. This job description is designed to provide an overview of basic skills, experiences and education required to perform the job and is not designed to cover or contain a comprehensive listing of all activities, duties, or responsibilities required of the employee to perform the essential functions of the job. In instances where educational degrees are required, the company will take into consideration factors such as additional experience, training, or certifications in lieu of specific educational requirements. #ZR

Job Description Also need for Houston, TX Sodick Corporation, leading manufacturer of CNC EDM machinery, is looking for Field Service Engineers. The Field Service Engineer reports to the National Service Manager and is responsible for traveling to customer and dealer facilities to service and install company machinery. Responsibilities: 1. Travel to customers' facilities to install, service and perform basic training on all company machinery., 2. Troubleshoot both electronic and mechanical problems that can occur on-site by using proper basic testing equipment (i.e. multimeter or oscilloscope)., 3. Examine customers' complaints regarding equipment malfunction and service issues, and communicate with customer and internal management regarding the technical analysis and determination., 4. Document all work done in a legible and technically sound manner., 5. Submit both service and expense reports for reimbursement. Qualifications and Skills Required: 1. Minimum Associate's Degree in Electronics required., 2. Machine shop experience preferred., 3. Excellent customer service skills, including ability to maintain integrity and ethics in all conversations and actions with customers., 4. Self-motivated, able to work with little or no supervision and to calmly handle stressful situations when customers complain of equipment malfunctions., 5. Possess technical curiosity and ability to diagnose and solve production issues., 6. Detail-oriented and able to get work completed in a manufacturing environment., 7. Must be able to travel up to 80% of the time. #ZR

Job Description We have a great opportunity for a Mechanical Engineer experienced in the water or wastewater field or in liquid processing to join our growing business. As Mechanical Engineer you will support Project Managers in the overall execution of a Capital Project and be responsible for the engineering support and deliverables required for a given project. We offer the opportunity to work on diverse engineering challenges with a supportive team and a flat structure where you will be able to add real value. About the role: • Support Project Managers with execution of Capital Projects within budget, schedule and to customer’s satisfaction., • Review and approve various drawings including P&ID, fabrication, single line, schematics, and other project related drawings., • Reviews Bill of Materials (BOM) for equipment / component design for compliance with engineering principles, contract requirements, and applicable standards., • Perform pump design & selection, hydraulic calculations, valve selections, instrumentation selection, and other equipment selection that meet contractual requirements and applicable standards., • Assemble, review, and / or approve specifications, data sheets, or other detailed information for specific components related to the project., • Specifying materials for purchasing including identifying vendors, initiating requests for quotation, making best price/best value purchasing determinations, specification compliance and tracking delivery of material., • Attend customer meetings / vendor meetings and offer meaningful input as it relates to the project., • Assist in the gathering of costs for equipment, labor estimates, subcontractor estimates, and other costs in preparation of proposals and commercial quotes. Requirements About you: • Bachelor of Science in Engineering (ME, ChE,) from an accredited, four-year university – ME preferred, • Demonstrated engineering experience in the water or wastewater field or fluid process engineering, • Experience with AutoCAD and applications is a plus, • Excellent customer service, communication, interpersonal, analytical, and problem-solving skills, • Strong time management and organizational skills, • Team oriented and Customer Focused, • Health Care Plan, • Retirement Plan, • Life Insurance, • Paid Time Off

Job Description Job Title: Distribution Design Engineer Job Description We are seeking an experienced Distribution Design Engineer to support active QA/QC efforts across distribution projects. This role is crucial in ensuring design accuracy, compliance with standards, and consistency across large-scale distribution and resiliency programs. The ideal candidate will have significant experience, strong technical judgment, and be actively involved in reviewing and validating distribution designs. Responsibilities • Perform active QA/QC reviews of distribution engineering design packages., • Review designs for compliance with standards, specifications, and construction practices., • Support overhead and underground distribution designs, including line extensions, rebuilds, and resiliency-related scopes., • Identify design discrepancies, provide corrective guidance, and ensure quality issues are resolved prior to client submission., • Collaborate with designers, engineers, and project managers to maintain quality and schedule adherence., • Support resiliency programs, ensuring designs align with storm hardening, reliability, and modernization initiatives., • Assist with mentoring junior designers and engineers on specific requirements and QA/QC best practices., • QA/QC experience supporting projects., • 5+ years of direct experience supporting distribution projects., • 5+ years of DDS (Distribution Design Studio) experience., • Bachelor’s degree in Electrical Engineering or a related discipline (or equivalent utility experience)., • Strong working knowledge of distribution standards, construction units, and design workflows., • Experience supporting multiple client projects simultaneously., • Excellent attention to detail and ability to identify risks in design packages. This is a Contract to Hire position based out of Houston, TX. Pay and Benefits The pay range for this position is $32.00 - $48.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Houston,TX. Application Deadline This position is anticipated to close on Mar 2, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job Description Job Title: Electromechanical Technician Job Description We are seeking a dedicated Electromechanical Technician to join our team, focusing on the assembly, integration, and testing of advanced tools. This hands-on R&D position is integral to the complete tool build-up from sections and subassemblies. Your role will involve connector and harness integration, executing functional tests with standard benchtop instruments, supporting thermal and oven testing, and structured troubleshooting. Clear documentation of builds and test results is essential to support our engineering teams. Responsibilities • Assemble small electromechanical units according to work instructions, schematics, and BOMs., • Integrate connectors and harnesses into systems., • Execute functional tests using standard benchtop instruments including DMM, DC power supply, and oscilloscope., • Conduct thermal and oven testing to ensure product reliability., • Troubleshoot and document build and test results clearly., • 2+ years of experience as an Electromechanical Technician., • Proficiency in troubleshooting mechanical and electrical systems., • Experience with assembly of electromechanical units., • Knowledge of preventive maintenance, hand tools, and schematics., • Experience soldering large mechanical complex tools and downhole tools., • Experience in military maintenance, particularly avionics, radar, or electronic systems, is a plus., • Proficiency with inspection tools such as micrometers, calipers, and pin gauges., • Familiarity with electrical test equipment including DMM and hipot/continuity., • Competence in defect identification related to solder joints, component orientation, and wiring/cable routing. The candidate will work in a dynamic environment, spending approximately 30% of the time in an office setting and 70% in a shop environment. This role offers hands-on experience with large mechanical tools, contributing to R&D efforts. The company values growth and development, providing opportunities for collaboration with experienced engineers and technicians. Candidates will initially rotate through various teams before being assigned to a permanent team, fostering a strong pipeline for early career development. Job Type & Location This is a Contract to Hire position based out of Houston, TX. Pay and Benefits The pay range for this position is $30.00 - $35.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Houston,TX. Application Deadline This position is anticipated to close on Feb 26, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email for other accommodation options.

Job DescriptionJob Description:As an Electrical Engineer, you’ll lead the design and optimization of electrical systems that power essential infrastructure—pipelines, compressor stations, and storage facilities. You’ll apply your technical expertise to integrate advanced technologies like automation, real-time monitoring, and energy storage, driving efficiency and innovation across operations. A key part of your role is ensuring safety through the implementation of arc flash mitigation, fault detection systems, and rigorous compliance with regulatory and environmental standards. You’ll also manage complex projects from concept to completion, aligning engineering solutions with business goals and timelines. This is a high-impact role where your leadership and problem-solving skills will directly contribute to operational reliability, safety, and strategic growth. Your work will challenge you, and with our Core Values to guide you, you’ll quickly learn and grow with us. Responsibilities/Expectations: Leads the design, implementation, and optimization of electrical systems and power distribution networks supporting critical infrastructure such as pipelines, compressor stations, and storage facilities Champions the integration of advanced technologies including automation, real-time monitoring, and energy storage to enhance system performance and reduce operational costs Implements robust safety measures such as arc flash mitigation and fault detection systems to protect personnel and ensure infrastructure reliability Provides technical expertise in power distribution, electrical schematics, and system layouts for both new construction and upgrades to existing facilities Manages complex engineering projects from concept to completion ensuring alignment with business goals timelines and budget constraints Ensures compliance with all relevant safety, environmental and regulatory standards across electrical systems and project execution Collaborates with cross-functional teams to deliver engineering solutions that meet internal and external customer needs Mentors and supports the development of junior engineers fostering technical growth knowledge sharing and a culture of continuous improvement Other duties as assigned Education/Years of Experience: Required: Bachelor’s degree in electrical engineering and eight (8) years engineering experience in natural gas, data centers or related industry Preferred: PE License Preferred: Master’s degree in electrical engineering Job Requirements: Demonstrates excellent organizational/interpersonal skills and safety as a main priority Proficiency in Microsoft Office Application and PC skills Power Generation and Controls experience Proficiency in reviewing arc flash studies and implementing improvements Working knowledge of electrical design codes (NEC, NEMA, API, IEEE, etc.) Preferred: Experience with PLCs Preferred: Project Management experience? Preferred: Experience working in Preliminary-Front End Engineering and Design (Pre-FEED), Front End Engineering Design (FEED), or Engineering, Procurement, Construction (EPC) of small to medium facility projects Preferred: Proficiency in designing, and implementing, Instrumentation systems, including Programmable Logic Controllers (PLC) and Human Machine Interface (HMI) systems

Job Description EnerMech is seeking an Umbilical Engineer to support offshore and onshore subsea projects, with a focus on umbilical testing, commissioning, and subsea control systems. This role combines project engineering with hands-on field execution. You will support umbilical and well commissioning activities from engineering through execution, including testing, installation, commissioning, and client delivery. Job Description: • Engineering and execution of umbilical hydraulic, electrical, and fiber optic testing Support umbilical commissioning, flushing, and fluid displacement., • Perform subsea control system installation, integration, testing, and commissioning., • Prepare and review procedures, drawings, calculations, and reports., • Lead or support FAT/SIT activities., • Mobilize/demobilize equipment and execute work onshore and offshore., • Interface directly with clients and project teams., • Ensure work is completed safely, to spec, and on schedule., • Bachelor’s degree in Engineering or equivalent industry experience., • 5+ years of offshore or subsea industry experience., • Strong experience with umbilicals and subsea control systems., • Knowledge of electrical and hydraulic systems., • Experience with SUTA, TUTA, pull-in heads, HPUs, EPUs, and distribution equipment., • Ability to read and interpret electrical and hydraulic schematics and test procedures., • Comfortable working in field and offshore environments., • Strong problem-solving and communication skills., • Competitive biweekly pay providing steady, predictable income, • Comprehensive PTO program with a strong balance for vacation and personal time, • Paid sick leave designed to support your health and well-being, • Ten paid holidays observed annually, • 401(k) with company matching to support long-term financial security, • Short-term and long-term disability coverage for added protection, • Company-paid life insurance coverage exceeding $45,000, • Supportive leadership team and a collaborative culture that encourages growth and development, • Convenient location near the 290 Northwest Freeway, making for an easy and efficient commute

Job Description Drilling and Completion Engineer, Offshore position: Job Title: Drilling and Completion Engineer (Offshore) Job Summary: We are seeking an experienced Drilling and Completion Engineer to join our offshore team. The successful candidate will be responsible for planning, executing, and optimizing drilling and completion operations on our offshore platforms. Key Responsibilities: • Design and implement drilling and completion programs for offshore wells., • Collaborate with drilling and production teams to ensure efficient and safe operations., • Analyze well data to optimize drilling and completion techniques., • Ensure compliance with safety and environmental regulations., • Manage and monitor drilling and completion costs., • Supervise and mentor junior engineers and field personnel., • Stay up-to-date with industry trends and best practices, • Requirements:, • Bachelors degree in petroleum engineering or related field, • Minimum 5 years of experience in drilling and completion engineering, preferably in an offshore setting, • Strong knowledge of drilling and completion techniques, including hydraulic fracturing and well intervention, • Experience with drilling and completion software, such as Well-View and Prosper, • Excellent problem-solving and analytical skills, • Strong communication and leadership skills, • Ability to work in a fast-paced, dynamic environment., • Offshore survival and emergency training certificates (such as HUET and BOSIET) We offer a competitive salary and benefits package, as well as opportunities for professional growth and development in a dynamic and innovative. for professional growth and development in a dynamic and innovative company.

Job Description Avionics Intern - Aerospace Engineering Location: Houston, TX Summer 2026: Late May - Early August About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With the first commercial lunar landing in history, multiple NASA lunar missions in development, and additional private missions on our manifest, we pride ourselves in supporting our customers and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. Internship Overview: Intuitive Machines is seeking a dynamic and detail-oriented individual to join our team as an Avionics Intern. This internship is designed for students pursuing degrees in electrical engineering, aerospace engineering, or a related field. As an Avionics Intern, you will play a role in the development and integration of avionics systems for aerospace applications. Key Responsibilities: • Assist in the setup and execution of tests for avionics systems, including functional, environmental, and reliability testing., • Contribute to the design and layout of PCBs for avionics applications, ensuring adherence to industry standards and project specifications., • Work on the design and testing of wiring harnesses, ensuring proper functionality and durability in aerospace environments., • Collaborate with experienced engineers to integrate avionics components into larger aerospace systems, ensuring seamless functionality., • Identify and resolve issues in avionics systems, utilizing problem-solving skills to ensure optimal performance., • Maintain accurate and detailed records of design, testing, and integration activities to ensure comprehensive documentation., • Adhere to safety protocols and guidelines during testing and integration activities to maintain a secure working environment. Qualifications: • Currently enrolled in a associates, bachelor's or master's degree program in electrical engineering, aerospace engineering, or a related field. Certifications & related coursework/background also welcome., • Strong interest in avionics systems, electrical design, and aerospace technology., • Familiarity or interest with PCB design tools and software or related coursework experience., • Understanding of wiring harness design principles and testing procedures or related coursework experience., • Hands-on experience with electrical testing equipment., • Effective communication and teamwork abilities. Benefits: • Hands-On Experience: Gain practical experience in avionics design, testing, and integration for aerospace applications., • Professional Development: Learn from experienced professionals in the aerospace industry, expanding your knowledge and skillset., • Networking Opportunities: Build valuable connections within the aerospace community and participate in company events., • Career Guidance: Receive mentorship and guidance from seasoned professionals, helping shape your future career path. US EEO Statement Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job Description Job Title: CMT Engineering Technician Location: Houston, Texas Company Overview: Join [Your Company Name], a leader in geotechnical engineering and materials testing services. We are committed to delivering the highest standards of quality and precision for our clients. Our team of experts works collaboratively to ensure successful project executions and innovations in construction and materials technology. Position Overview: We are seeking a skilled and detail-oriented CMT (Construction Materials Testing) Engineering Technician to join our dynamic team. The successful candidate will be responsible for performing field and laboratory testing of construction materials to ensure compliance with project specifications and standards. This role offers an excellent opportunity to grow technically and professionally in a supportive and collaborative environment. Key Responsibilities: • Conduct field and laboratory tests on construction materials including soil, concrete, asphalt, and aggregates., • Interpret and document test results accurately, providing insights and recommendations as needed., • Utilize testing equipment and tools effectively, maintaining their calibration and ensuring they meet industry standards., • Prepare detailed reports on findings and present data to engineers and project managers., • Collaborate with project teams to assist in quality control and compliance with regulatory requirements., • Communicate with construction teams and clients to ensure understanding of testing processes and results., • Adhere to safety protocols and contribute to a safe working environment. Qualifications: • High school diploma or equivalent; post-secondary diploma or certification in construction technology, engineering technology, or a related field is preferred (ACI, NICET, TxDOT)., • Experience in construction materials testing or a related field is highly desirable., • Proficient in understanding and interpreting engineering drawings and specifications., • Strong analytical and problem-solving skills., • Excellent attention to detail and organizational skills., • Ability to work independently and within a team environment., • Valid driver’s license and ability to travel to various job sites as needed. Working Conditions: • The role requires both office and fieldwork, with the potential for exposure to various weather conditions and construction environments., • Ability to lift and carry equipment and tools up to 50 Lbs. as part of daily duties. Benefits: • Competitive salary and performance incentives., • Comprehensive health, dental, vision insurance, and 401K., • Opportunities for professional development and advancement., • Supportive work environment with a focus on work-life balance. Application Process: If you are a motivated and skilled technician looking to advance your career in the field of construction materials testing, we encourage you to apply. Please submit your resume and a cover letter outlining your qualifications and experience to . Geoscience Engineering & Testing, Inc. is proud to be an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or any other applicable legally protected characteristics. Join us and contribute to building the future with precision and integrity!

Job Description Who We Are Uson is the premiere global provider of leak testing equipment and solutions, serving the medical device, automotive, electric vehicle, industrial, and packaging industries. Since 1963, we’ve transformed the leak testing technology originally developed for NASA into cutting-edge solutions for automated industrial assembly applications worldwide. Summary Summary of Position: The Applications Engineering Specialist is a key contributor within the Sales department, responsible for ensuring technical excellence and operational support across quoting, customer specification interpretation, and equipment selection. This role serves as a technical resource for both internal and external stakeholders. Duties and Responsibilities: • Interpret customer Test Specification requirements., • Select equipment to fit test applications and verify with feasibility, and/or studies., • Translate requirements to optimum solutions., • Provide applications and operational support as needed to Internal and external customers., • Act as a technical resource for customer applications issues., • Perform maintenance assistance and trouble shooting for internal and external support., • Escalate feedback regarding changes, enhancements or challenges to existing products., • Support product development in new product specifications and testing requirements., • Perform Proof of Concept/Application Studies using customer parts., • Manage instrument demo fleet., • Provide online and onsite instrument training for customers and channel partners, • Monitor performance, identify problems and implement solutions to ensure optimal performance., • Ensure quotes/proposals meet customer specifications., • Drive customer satisfaction, advocacy and loyalty, • Ability to work in a team but maintain independent work skills; be a self-starter/self-learner and possess a strong work ethic., • Proficient in Microsoft Applications to include but not limited to; Word, Excel, Outlook, Power Point and Teams., • Ability to organize, multi-task and prioritize detailed work on multiple, concurrent tasks, with competing priorities., • Great level of reliability and accountability as many functions of the role are subject to stringent or changing deadlines., • Excellent problem solving/troubleshooting and analytical skills., • Excellent project management skills., • Bachelor’s degree or equivalent education and experience in engineering, or related technical field commensurate experience., • A proven track record of successful work experience., • Minimum 3 years in, interfacing with customers on software and hardware usage., • 1-2 years of experience working with HubSpot CRM or similar., • Ability to hear and verbally exchange ideas and information with the public, staff and others on the phone and in the office., • This position will frequently be required to sit, stand, and walk (Below based on work time):, • Sitting 50%, • Standing 30%, • Walking 20%, • This position must frequently lift and/or move up to 50 pounds., • Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus., • Use finger dexterity to operate a computer and other office equipment and hand strength to grasp files and other objects. Essential duties of this classification are performed in an office environment as well as offsite locations with moderate travel via car or plane. These work environments may include frequent interruptions and a high level of contact with staff, other members of management, customers, vendors, and off-site employees/locations. Travel: Domestic: 20% Compensation and Benefits: Company offers competitive salary. We offer comprehensive benefit packages to include Medical, Dental, Vision, Life Insurance, and 401(k). Job description statements are intended to describe the general nature and level of work being performed by employees assigned to this job title. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required. Uson is an equal opportunity employer inclusive of female, minority, disability and veterans, (M/F/D/V). Hiring, promotion, transfer, compensation, benefits, discipline, termination and all other employment decisions are made without regard to race, color, religion, sex, sexual orientation, gender identity, age, disability, national origin, citizenship/immigration status, veteran status or any other protected status. We are committed to the protection and promotion of your privacy. In connection with your application for employment with us at PAC, please click on this link to view our Applicant Privacy Notice. PAC is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

Job Description Zone IT Solutions is seeking an experienced SCCM Engineer to join our dynamic team. In this role, you will be responsible for deploying and managing Microsoft System Center Configuration Manager (SCCM) environments, ensuring efficient software distribution, patch management, and system monitoring to support our global IT service clients. Requirements • Minimum of 4 years of experience with SCCM (2012 or Current Branch), • Strong expertise in infrastructure design and deployment within SCCM, • Experience troubleshooting SCCM-related issues and conducting root cause analysis, • Ability to develop, manage, and support software packaging and deployment processes, • Solid knowledge in patch management including Windows Update Services (WSUS), • Understanding of Microsoft Windows operating systems (workstation and server), • Experience with scripting languages such as PowerShell, VBS, or similar, • Strong problem-solving and analytical skills, • Excellent communication and collaboration abilities in a multinational environment About Us We specialize in Digital, ERP, and larger IT Services. We offer flexible, efficient and collaborative solutions to any organization that requires IT, experts. Our agile, agnostic, and flexible solutions will help you source the IT Expertise you need. If you are looking for new opportunities, send your profile at . Also follow our LinkedIn page for new job opportunities and more. Zone IT Solutions is an equal opportunity employer and our recruitment process focuses on essential skills and abilities. We encourage applications from a diverse array of backgrounds, including individuals of various ethnicities, cultures, and linguistic backgrounds, as well as those with disabilities.

Job DescriptionJob Description: This position is responsible for maintaining and improving the manufacturing quality process in order to meet (and exceed) internal and external customer requirements. Duties and Responsibilities: • Prepare and maintain quality-related documents such as procedures, records of inspections, and SOPs (Standard operating procedures)., • Interface with customers, suppliers, and internal departments to solve all quality-related issues., • Prepare, analyze and present Quality reports at DRT meeting as per cadence set by Customer., • Participate and support Quality improvement processes as part of the DRT (defect reduction team) or QIT (quality improvement team)., • Provide guidance, direction, and review to Quality Inspectors and OBAs (out of box auditors)., • Prioritize and lead corrective actions for EQIRs/QNARs raised by customer for failed materials and other quality issues reported from the field and/or in process., • Perform FAI (first article inspection) on NPI (new product introduction), FCS (first customer shipment), and ECN (engineering change notification) products. Work towards developing associated SOPs for applicable quality stations., • Review and disposition Non-conforming material and work towards solutions to reduce scrap., • Review planning readiness for NPI, ECO (engineering change order), and deviation implementation., • Coordinate and support all purge and rework, provide timely feedback to customer for all Purge related activities via email and/or customer Portal., • Participate in internal and external quality audits as required., • Must be able to exercise independent judgment and problem solving skills, • Working knowledge of Quality improvement processes and systems required., • Must be able to manage multiple projects/requirements in a fast-paced environment, • Excellent communication (written and verbal) skills, • Proficiency with Microsoft Office applications required, • SAP, Six Sigma, and ISO knowledge preferred, • Strong organizational skills, attention to detail, and sense of urgency, • Must have ability to remain flexible in a dynamic work environment, • Bachelor’s degree in a related field or 4 years of direct quality experience., • Associate’s degree in a related field with 2 years of direct quality experience will be considered., • Minimum 1 year related quality experience required, 3 years preferred.Manufacturing experience is a plus. Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR pUc9eePQrP

Job Description Electrical Engineering Internship Description Dresser Utility Solutions in Houston, TX is seeking an Electrical Engineering Intern responsible to support our new MC3 product. This internship provides a unique opportunity to apply theoretical knowledge to real-world projects, collaborate with seasoned professionals, and contribute to the development of groundbreaking solutions in the field of electrical engineering. Join our dynamic and innovative team as an Electrical Engineering Intern and embark on a hands-on learning experience in a cutting-edge technological environment. Responsibilities • Collaborate with senior engineers to contribute to the design and development of electrical systems and components., • Participate in brainstorming sessions and provide innovative ideas for solving engineering challenges., • Support the testing and validation processes for electrical systems., • Assist in creating and executing test plans to ensure their reliability and performance of meters., • Utilize CAD tools and other software for schematic design and layout., • Maintain accurate and detailed documentation of designs, test results, and project process., • Create reports and presentations to communicate findings and recommendations., • Collaborate with cross functional teams, including Mechanical Engineers and other Interns., • Participate in team meetings to discuss project goals, timelines, and challenges., • Conduct research to support engineer decision making and improve project outcomes., • Assistant identifying and resolving technical issues during the development and testing phases., • Must be a currently enrolled student majoring in Electrical Engineering and having completed at least the freshman year., • Minimum GPA requirement of 3.2., • Must be able to communicate effectively both orally and in written form., • Will be interacting with production, maintenance, vendors, contractors, management, and engineering., • Experience with PCB design and layout., • Experience with OrCAD software a plus., • Programming skills (e.g., C, Python) for embedded systems., • Knowledge of analog and digital circuit design., • Occasionally involved in presentations and providing training for plant personnel. Electrical Engineering. Dresser Utility Solutions is an Equal Opportunity Employer. We respect and seek to empower each individual and support the diverse cultures, perspectives, skills and experiences within our workforce. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job DescriptionCompany Description Indotronix International Corporation, a 25 + years old organization providing Contract Staff Augmentation to direct clients like ATOS, Xerox, Accenture, Cap Gemini, Verizon to list a few. Job Description Job Title: Sr Engineering Specialist High Voltage & Interconnection Location: Houston, TX 77079 Job type: Fulltime - Direct Hire We are seeking an experienced professional to lead and deliver technical expertise for utility-scale power generation projects—including solar, wind, and battery storage. In this senior role, you will manage critical project sub-components such as transmission lines and oversee all aspects of high-voltage (HV) electrical systems, ensuring seamless interconnection of power generation facilities to utility power grids. Your leadership will drive innovation, reliability, and compliance in the development of innovative renewable energy infrastructure. What you will do: • Lead the execution aspects of design, construction, and commissioning and support the development of Generator Interconnection Agreement (GIA) for the interconnection(s) process with utilities, Independent System Operators (ISOs), and Regional Transmission Organizations (RTOs)., • Review and optimize HV/MV substation, collection, transmission line, and equipment specifications (transformers, circuit breakers, switchgear, battery storage (BESS), etc.)., • Conduct or review power system studies (e.g., power flow, short-circuit, arc-flash, protection coordination, grounding) and ensure all designs align with applicable codes, standards and company specifications., • Act as technical interface for the project between internal teams (Power Business Development, Technical Services, Power Operations, Supply Chain Management, Legal, Safety, Land, Environment, Projects Supporting Groups, etc.), external consultants, EPC contractors, equipment suppliers and equipment vendors., • Aid in the procurement process for HV equipment by developing/supporting technical bid packages, optimizing design and equipment, reviewing/approving vendor submittals and working collaboratively with the broader project team in bringing domain expertise to equipment sourcing., • Provide expert technical support during the construction and commissioning phases, including office and project site-based oversight & quality control through design and construction, participating in acceptance tests as required and taking a leadership role in commissioning and integration, working collaboratively across internal & external teams., • Actively contribute to the project reporting & key achievements tracking to partners and management, proactively bringing up issues as needed. Who you are: • University degree in Engineering, registered as a PE (US) or P.Eng. (Canada), strong preference for Electrical Engineering., • Minimum 8 years, preferred 10-15+ years of progressively increasing technical and informal/functional leadership experience., • Directly related experience in utility scale power systems electrical design, integration and interconnection is a variety of North American ISOs., • Broad experience, ideally with a site/field and office background., • Collaborative value-based attitude, balancing technical with cost, schedule, and full lifecycle asset considerations., • Effective communication skills to lead meetings with internal and external partners., • Role requires a valid drivers' license, which will be verified with a motor vehicle check prior to hire. Working Conditions: • Office environment with some field work required. All your information will be kept confidential according to EEO guidelines.

Job DescriptionPurpose of the positionFoxconn Technology Group is a globally leading electronics manufacturing company currently hiring two Asset Warehouse Managers to be responsible for the daily management of the asset department. Upon joining the team, you will lead the entire team, responsible for capital expenditure customer service, asset procurement and receiving inspection management, asset inventory, daily inventory monitoring, and ensuring the normal operation of production lines Duties and Responsibilities1 Familiar with warehouse management and planning 2 Experience in asset purchase, import, storage, allocate, and exit of district processes 3 Asset accounting management (in, stock, out Education and work experience • Bachelor's degree or above, major in Business Administration and Accounting, • Modern office position, equipped with office facilities, team collaboration, • This position requires the ability to handle emergencies, coordinate solutions, lead the team to innovate, and ensure normal production operationsSkills: 1. Proficient in using Excel/PPT, with strong reporting skills 2. Experience in procurement and supply chain work, 3. Proficient in English communication; working knowledge of Chinese is preferred but not required. cLG69paW6J

Job DescriptionJob Description: This position is responsible for maintaining and improving the manufacturing quality process in order to meet (and exceed) internal and external customer requirements. Duties and Responsibilities: • Prepare and maintain quality-related documents such as procedures, records of inspections, and SOPs (Standard operating procedures)., • Interface with customers, suppliers, and internal departments to solve all quality-related issues., • Prepare, analyze and present Quality reports at DRT meeting as per cadence set by Customer., • Participate and support Quality improvement processes as part of the DRT (defect reduction team) or QIT (quality improvement team)., • Provide guidance, direction, and review to Quality Inspectors and OBAs (out of box auditors)., • Prioritize and lead corrective actions for EQIRs/QNARs raised by customer for failed materials and other quality issues reported from the field and/or in process., • Perform FAI (first article inspection) on NPI (new product introduction), FCS (first customer shipment), and ECN (engineering change notification) products. Work towards developing associated SOPs for applicable quality stations., • Review and disposition Non-conforming material and work towards solutions to reduce scrap., • Review planning readiness for NPI, ECO (engineering change order), and deviation implementation., • Coordinate and support all purge and rework, provide timely feedback to customer for all Purge related activities via email and/or customer Portal., • Participate in internal and external quality audits as required., • Must be able to exercise independent judgment and problem solving skills, • Working knowledge of Quality improvement processes and systems required., • Must be able to manage multiple projects/requirements in a fast-paced environment, • Excellent communication (written and verbal) skills, • Proficiency with Microsoft Office applications required, • SAP, Six Sigma, and ISO knowledge preferred, • Strong organizational skills, attention to detail, and sense of urgency, • Must have ability to remain flexible in a dynamic work environment, • Bachelor’s degree in a related field or 4 years of direct quality experience., • Associate’s degree in a related field with 2 years of direct quality experience will be considered., • Minimum 1 year related quality experience required, 3 years preferred.Manufacturing experience is a plus. Foxconn Assembly, LLC is an Equal Opportunity Employer (EOE). All qualified candidates will receive consideration without regard to race, color, religion, gender, sexual orientation, national origin, age, disability, or marital status in accordance with applicable federal, state and local laws. Foxconn Assembly, LLC participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Powered by JazzHR A7QFKrmiOY

Job DescriptionPurpose of the position Supplier Quality Development & Auditing Supplier Corrective Actions & Issue Resolution Incoming Material Quality Control Duties and Responsibilities 1. Supplier Quality Development & Auditing, 2. Supplier Corrective Actions & Issue Resolution, 3. New Product Introduction Support, 4. Incoming Material Quality Control, 5. Supplier Performance Monitoring & Improvement, 6. Compliance & Risk Mitigation Education and work experience Successful completion of 4 years of high school, or equivalent, plus completion of 4 years of college with a bachelor’s degree. Major in Industrial Engineering, Mechanical Engineering, or other related subjects. Over 2 years of experience in manufacturing process quality. Supervision QA Manager Working conditions • Office-based role, fast-paced work environment, • This position must be able to respond to after-hour emergencies and be available to work non-core hours or overtime to complete various projects without interruption to operations. Updated: July 2025 Skills: Knowledge of ISO 9001, Cross-Functional Collaboration and Communication, More than 2 years of QA management experience Fluency in Mandarin Chinese is preferred due to frequent interactions with suppliers and internal teams in Taiwan/China. Powered by JazzHR A22AhJjvL2

Job Description Electrical Engineer Location: Houston Salary Range: $117,000–$194,000 (based on experience) About the Role We are seeking a talented and experienced Electrical Engineer to join our team. This position requires a PE license and offers the opportunity to lead and manage the design of electrical systems for diverse client projects, with a primary focus on the education market. This is an excellent opportunity to contribute to innovative projects, mentor team members, and grow your career with a forward-thinking company. Key Responsibilities Design and Documentation • Perform engineering calculations and create electrical AutoCAD and Revit drawings independently., • Write, edit, and produce project specifications with no supervision., • Review and approve shop drawings, RFIs, submittals, addendums, and other construction documents for electrical-related items.Field Work and Compliance, • Conduct fieldwork and generate field reports to verify design accuracy., • Maintain expert knowledge of building codes, company design standards, and client-specific requirements.Systems Expertise, • Design and manage systems for:, • Lighting and lighting controls, • Fire alarm systems, • Power distribution systems, including emergency power, • Technology systemsTeam Leadership, • Supervise and mentor interns, designers, and EITs in electrical systems development., • Seal final contract documents as required.Client and Business Development, • Participate in client meetings and events like golf tournaments, receptions, and galas., • Translate technical expertise and soft skills into business development goals., • Maintain excellent knowledge of our mission, vision, and client goals.Continuous Learning and Adaptability, • Stay updated on new technologies and methodologies in electrical engineering., • EIT/PE license required., • Proven ability to manage multiple projects independently., • Proficient in AutoCAD, Revit, and relevant engineering software., • Expertise in electrical engineering principles, building codes, and project management., • Strong communication and leadership skills., • Experience with education market projects is highly preferred., • Salary Range: $117,000–$194,000, depending on years of experience and role responsibilities., • Generous PTO to ensure work-life balance., • Paid Holidays, including company-designated holidays and personal days., • Comprehensive health, dental, and vision insurance., • 401(k) retirement plan with company match., • Professional development opportunities and mentorship programs., • Collaborative and supportive work environment.

Job DescriptionSalary: $90,000 - $130,000 Are you passionate about shaping the future of humanity's presence in space? Lunar Outpost, a trailblazer in space robotics and planetary mobility, invites you to join our team! Lunar Outpost is dedicated to creating a sustainable presence in space, while also driving a positive impact here on Earth. We are seeking a Mission Operations Engineer to help us create the future of lunar surface mobility in a fast-paced startup environment. As a Mission Operations Engineer, you will support the operations of spacecraft by developing mission plans, managing ground systems, and executing real-time flight operations. You will be focused on the LTV (Lunar Terrain Vehicle). This cutting-edge crewed and autonomous mobility platform will drive NASA astronauts, carry payloads, and build key infrastructure on the lunar surface. Youll play a critical role in ensuring mission success by carefully planning, monitoring, and collaborating with cross-functional teams. Key Responsibilities: • Develop and refine mission plans, including science objectives, operational strategies, and contingencies, including collaboration with system design and test teams to integrate full life cycle considerations into the vehicle and its operations, • Oversee and maintain ground systems supporting spacecraft operations, • Execute spaceflight missions, including monitoring spacecraft health, executing commands, and responding to anomalies in real time, • Plan and coordinate spacecraft maintenance, including hardware/software updates, • Manage mission data flow, from collection and processing to archiving and analysis, • Train flight controllers and provide technical support during operations, • Identify and mitigate operational risks to ensure mission safety and reliability, • Collaborate with internal and external scientists, engineers, and mission control teams to achieve objectives Required Qualifications: • Bachelors degree in Aerospace Engineering, Systems Engineering, or a related field, • 3+ years of experience in mission operations, flight control, or spacecraft systems, • Team-oriented, with excellent verbal and written communication skills, • Excellent organization and time management skills and attention to detail, • Ability to multitask and prioritize tasks effectively, • U.S. Persons Preferred Qualifications: • Masters degree in a related field, • Experience supporting NASA or other spaceflight missions, • Familiarity with ground control systems and data management tools, • Knowledge of spacecraft design, orbital mechanics, or risk management practices Any offer of employment for this position is conditional upon Lunar Outpost receiving the LTVS Phase II contract from NASA. If the contract is not awarded to Lunar Outpost, this offer will be considered null and void, without further obligation to Lunar Outpost. Lunar Outpost is an equal opportunity employer. We do not discriminate against protected characteristics (gender, age, sexual orientation, race, nationality, ethnicity, religion, disability, veteran status). We want all employees (including executives and HR) to treat others with respect and professionalism.

Job DescriptionThis individual will provide project management and mechanical (HVAC) design services on a variety of building projects. Specific position responsibilities include, but are not limited to: • Project and team management, as well as technical design on assigned projects., • Assist in the production of construction documents (drawings and specifications) for new buildings, renovations, and additions to existing facilities., • Create and maintain project schedules., • Provide coordination of project designs with other disciplines., • Maintain positive client relationships.Our ideal candidate will have a degree in Architectural or Mechanical Engineering, Professional Registration, and at least 2 or more years of related MEP experience, including some project management experience. The ideal candidate will also demonstrate success in the following skills and abilities:, • Knowledge of building mechanical codes and the ability to perform accurate load calculations., • Strong mechanical/HVAC design capability in retail, commercial, central plants, boilers, cooling towers, and related markets., • Knowledge of sustainable design practices., • Successful verbal and written communication skills., • Highly proficient in the use of AutoCAD and learning Revit MEP engineering modeling tools.We are committed to the support and growth of our employees by providing several key benefits, which include:, • Competitive compensation and high bonus potential., • Business Casual attire workplace Flexible hours, • Family-friendly working environment., • 401(k) with industry-leading match and generous profit sharing., • Diverse portfolio of exciting and innovative design projects., • Commitment to sustainable design., • Tremendous opportunities for professional growth and advancement.

Job Description Propulsion Intern - Aerospace Engineering Location: Houston, TX Summer 2026: Late May - Early August About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. We believe our mission is to further research, communications, and exploration beyond low lunar orbit. With multiple NASA lunar missions in the making and additional private missions on our manifest, we pride ourselves in supporting NASA, our customers and the nation in paving the way to return humans to the surface of the moon. Our world-class team includes experts in all spacecraft subsystems design, development, and test, on-orbit operations, and safety. Internship Overview: Intuitive Machines is seeking a dynamic and ambitious individual to join our team as a Propulsion Intern. This internship is designed for students pursuing degrees in aerospace engineering, mechanical engineering, or a related field. As a Propulsion Intern, you will have the opportunity to work on real-world projects, gaining hands-on experience in the design, testing, and optimization of propulsion systems. Key Responsibilities: • Contribute to the design and analysis of propulsion systems, including engines and thrusters, for various aerospace applications., • Assist in the setup and execution of propulsion system tests, collecting and analyzing data to evaluate performance and identify areas for improvement., • Use software tools to simulate and model propulsion system behavior, aiding in the optimization and refinement of design concepts., • Work closely with experienced engineers and researchers to contribute to ongoing propulsion projects, providing valuable insights and support., • Maintain detailed records of design iterations, test results, and analysis findings, ensuring accurate and comprehensive documentation., • Adhere to safety protocols and guidelines during testing and research activities to maintain a secure working environment. Qualifications: • Currently enrolled in a bachelor's or master's degree program in aerospace engineering, mechanical engineering, or a related field., • Strong interest in propulsion systems and aerospace technology., • Familiarity with propulsion system design principles and fundamentals, heat transfer,, • Proficiency in engineering software tools for simulation and analysis., • Strong analytical and problem-solving skills., • Effective communication and teamwork abilities. Benefits: • Hands-On Experience: Gain practical experience in the design and testing of propulsion systems for aerospace applications., • Professional Development: Learn from experienced professionals in the aerospace industry, expanding your knowledge and skillset., • Networking Opportunities: Build valuable connections within the aerospace community and participate in company events., • Career Guidance: Receive mentorship and guidance from seasoned professionals, helping shape your future career path. US EEO Statement Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job DescriptionPurpose of the position Responsible for maintain, optimize, and troubleshoot fixtures of SMT (Surface Mount Technology, consumer electronics industry) fixtures(tools to support PCB or pressing PCB, such as: SMT Holder/Carrier/JIG). Collaborate closely with production, engineering, and quality teams to ensure fixture Reliability, improve yield, and improve fixture usage efficiency. Duties and Responsibilities • Fixture design: analyze and design fixture designs using CAD software and propose improvements., • Fixture purachse: Work cross-functionally (production,asset department) to enhance fixture arrived before built start., • New fixture/tools IQC(incoming quality control)：follow IQC inspection procedures to check the samples meet the specification requirement or not;, • Fixture/tools diagnose, repair: to ensure fixture performance and reduce maintenance costs. Work Experience: 1-3 years of experience in Fixture/JIG maintenance, tooling design, or precision equipment repair (electronics/smartphone manufacturing preferred). Working conditions 1.Join a high-growth, innovation-driven team shaping next-gen consumer electronics. 2.Work at the intersection of engineering, automation, and global operations. 3.Modern, collaborative offices or labs with flexible setups emphasizing innovation and teamwork. Skills: Understand SMT process flow, proficient in using CAD drawing software, possess mechanical troubleshooting skills Capability: Possess good problem-solving ability, team collaboration spirit, meticulous and careful work Powered by JazzHR H5yEwGUyzD

Job DescriptionElectrical Engineer (Level III+) Houston, TX Oil & Energy | Critical Infrastructure Full-Time | Relocation Assistance Available About the Role We are seeking a highly skilled Electrical Engineer (Level III or higher) to join our team in Houston, TX. In this role, you will lead the design and optimization of electrical systems that power critical infrastructure including pipelines, compressor stations, and storage facilities. This is a senior-level opportunity requiring strong technical expertise, project leadership capability, and a deep understanding of power distribution systems within industrial or energy environments. Your work will directly impact operational reliability, safety performance, and long-term infrastructure efficiency. Key Responsibilities * Lead the design, implementation, and optimization of electrical systems and power distribution networks * Support infrastructure including pipelines, compressor stations, and storage facilities * Integrate advanced technologies such as automation, real-time monitoring, and energy storage systems * Implement arc flash mitigation strategies and fault detection systems to ensure personnel and equipment safety * Provide technical expertise in power distribution, electrical schematics, and system layouts * Manage complex engineering projects from concept through completion, ensuring alignment with business objectives, budget, and timelines * Ensure compliance with NEC, NEMA, API, IEEE, and all applicable safety and regulatory standards * Collaborate with cross-functional teams including operations, project management, and leadership * Mentor junior engineers and contribute to technical development initiatives Required Qualifications * Bachelor’s degree in Electrical Engineering * Level III experience (mid-senior level) required * Minimum 4+ years of engineering experience in natural gas, oil & energy, data centers, or related industrial environments * Strong experience in power distribution systems * Proficiency reviewing arc flash studies and implementing improvements * Working knowledge of electrical design codes (NEC, NEMA, API, IEEE, etc.) * Strong organizational and interpersonal skills * Demonstrated safety-first mindset * Proficiency in Microsoft Office and general PC applications Preferred Qualifications * Professional Engineer (PE) license * Master’s degree in Electrical Engineering * Power generation and controls experience * PLC and HMI system design and implementation experience * Project management experience * Experience in Pre-FEED, FEED, or EPC project environments * Instrumentation system design experience Powered by JazzHR nbr1JoanFB

Job DescriptionRole Overview We’re looking for a Senior Power Electronics Engineer with project-based engineering experience to lead the AI UPS electrical-related hardware product design, documentation, project-specific technical compliance and support the development activities related to these products. This is a product focused role—we need someone who can speak fluently about both power electronics and BESS systems, ideally have experience with UPS systems in mission critical applications, and interface with project, commissioning and O&M engineering teams. Location Hybrid (4 days in office) in Houston, TX What You’ll Do • Support the business development team by providing technical proposals e.g. SLDs and GAs that meet the customer’s needs., • Compile product technical information packages for the project engineering team., • Co-lead review and validation of the AI UPS electrical-related product during the project execution phase., • Maintain technical documentation including as-built drawings., • Support product development of the AI UPS by capturing design improvement feedback from the different project phases: design, commissioning and O&M., • Support product development by recommending design approaches and vendors of the main equipment., • Participate in product design sprints with the development team., • Participate in project design engineering meetings with customer and project engineering team., • Participate in the product’s commissioning phase.Required Qualification, • Bachelor’s degree in Electrical Engineering, Power Electronics Engineering, or similar technical field., • 8+ years of hands-on power electronics engineering experience in project-based or industrial settings., • Proven system-level design experience of MW scale power electronics equipment., • Understanding of BESS systems integration with power electronics equipment., • Project management skills., • Excellent communication skills across technical and non-technical teams., • Willing to travel up to 20% for product FAT inspection and site commissioning witnessing.Preferred Plus, • Competitive salary + annual performance-based bonus eligibility, • Medical, dental, and vision insurance, • 401(k) with company match, • Competitive salary + annual performance bonus eligibility, • Christmas Bonus (Aguinaldo): 30 days, • Major medical expenses and life insurance YCWwyVt8Gd

Job Description About the Role: As an Engineer in the Information industry, you will play a pivotal role in designing and implementing advanced systems that leverage Artificial Neural Networks to solve complex problems. Your work will directly contribute to the development of innovative solutions that enhance operational efficiency and drive technological advancements. You will collaborate with cross-functional teams to ensure that systems are robust, scalable, and meet the highest standards of quality. This position requires a deep understanding of C++ programming to develop and optimize algorithms that power our neural network models. Ultimately, your contributions will help shape the future of our technology offerings and improve user experiences across various applications. Minimum Qualifications: • Bachelor's degree in Engineering, Computer Science, or a related field., • Proven experience in developing applications using C++., • Master's degree in a relevant field., • Experience with machine learning frameworks such as TensorFlow or PyTorch., • Design, develop, and implement algorithms using Artificial Neural Networks to address specific engineering challenges., • Write and maintain high-quality C++ code to support system functionalities and performance optimization., • Collaborate with software developers, data scientists, and other engineers to integrate neural network solutions into existing systems., • Conduct system testing and validation to ensure reliability and accuracy of the implemented solutions. The required skills in Artificial Neural Networks will be utilized daily to create models that can learn from data and improve over time, ensuring that our systems remain cutting-edge. Proficiency in C++ is essential for writing efficient code that can handle complex computations and large datasets, which is a core part of our engineering processes. Systems engineering skills will be applied to integrate various components of our technology stack, ensuring seamless operation and performance. Additionally, preferred skills such as experience with machine learning frameworks will enhance your ability to implement state-of-the-art solutions. Overall, these skills will enable you to contribute effectively to projects that require innovative thinking and technical expertise.

Job DescriptionPurpose of the position Supplier quality management & issue handling & customer service Duties and Responsibilities • Supplier Development & Qualification- Conduct supplier audits and assessments to ensure compliance with quality standards • Develop and maintain supplier quality agreements to align with regulatory and corporate requirements • Quality Issue Resolution & Corrective Actions- Investigate supplier-related defects using structured problem-solving methods (8D, 5Why, CAPA) • Drive root cause analysis and verify corrective/preventive actions to prevent recurrence, • Manage non-conformance reports (NCRs) and ensure timely supplier responses • Supplier Quality Performance Monitoring & Improvement- Define and track supplier Key Quality Performance Indicators (KPIs) such as PPM (Parts Per Million), defect rates • Conduct periodic supplier scorecard reviews and implement improvement plans, • Support internal and external audits (e.g., ISO, customer-specific requirements) • Cross-functional Collaboration & Customer Support- Work with internal teams to align supplier quality with product design (DFM/DFQ) . • Address customer complaints related to supplier quality and ensure resolution promptly., • Participate in New Product Development phases to mitigate quality risks early Education and work experience • Bachelor’s degree in Engineering (Mechanical, Electrical, Material, or related field)., • 2+ years of supplier quality experience in consumer electronics manufacturing and product analysis., • Proficiency in quality tools (SPC, FMEA, MSA, Six Sigma, 8D), • Office-based role, fast-paced work environmentSkills:, • SQE working experience in SMT/Test/Assembly factory required., • Strong ability for continuous learning., • Proactive in work and strong resilience., • Capability to manage a team and planning. 3CqOgzsOjd

Job DescriptionGround Stations Engineering Intern – Aerospace Engineering Houston, Texas Summer 2026: Late May - Early August About Intuitive Machines: Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. Our mission is to further science and exploration, communications, and economic progress from the Earth to the Moon and beyond. With the first commercial lunar landing in history, multiple NASA lunar missions in development, and additional private missions on our manifest, we pride ourselves in supporting our customers and the nation in paving the way to return humans to the surface of the Moon. Our world-class team includes experts in all aspects of spacecraft subsystems design, development, and test, on-orbit operations, and safety. Internship Overview: We are seeking a Ground Stations Engineering Intern to join our technical team. This position will support ongoing operations, along with development and testing of a commercial Telemetry, Tracking and Control (TT&C) network of ground stations. Under the supervision of senior engineers the will work in a cross-functional team on the design, development, test, and operation of flight and ground support hardware, including associated software. This is a paid, full time internship in Houston Texas. Responsibilities Or Areas of Support • Assist in development and execution of test plans for ground station hardware, • Assist in the development of real-time operations products, including procedures, asset schedules, troubleshooting documentation and Interface Control Documents (ICDs), • Work with internal and external stakeholders to integrate ground software and network automation, • Participate in Integration & Verification activities Qualifications: • Currently pursuing a degree in Electrical Engineering, Computer Science, Aerospace Engineering, Physics, or a related field., • Basic understanding of ground stations, satellite communication, or networking protocols is a plus., • Analytical and troubleshooting skills., • Strong enthusiasm for space exploration and communication systems., • Excellent problem-solving and critical-thinking abilities., • Effective communication and teamwork skills., • Willingness to learn and adapt in a fast-paced, collaborative environment. Preferred Qualifications • Program or coursework around ground stations in university or in another setting., • Programming skills or familiarity with some of the cross functional disciplines such as avionics, radio frequency, etc. US EEO Statement Intuitive Machines is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

Job DescriptionJob Overview: This position is responsible for developing, modifying, and maintaining all test software/hardware tasks and resources to support production manufacturing. Office located in Houston Duties and Responsibilities: Work with Test Development Engineer to develop test scripts, implement test plan, and smoothly carry out new production testing for mass production. Sustaining test related issues for production and work with internal team and customer for rootcause analysis as well as improvement. Monitor test failure trends in production and provide corrective actions to improve production test yields. Setup and maintain production test equipment such as UCS Servers, Terminal Servers, Switches, Power cycle boxes, Hipot machines, etc. Interface with customers and internal cross-functional teams to solve all testing-related issues. Come up with testing related improvement projects and be able to carry out the project for good execution and drive end result. Train Technicians and Testers on new and existing testing procedures and product troubleshooting. Perform other duties as assigned. Required Knowledge, Skills and Abilities: Manufacturing/Production Testing experiences is must. Hands on Python Programming experiences is must. Experience in troubleshooting hardware and software issues within a Linux/Unix/Windows environment is must. Other industrial test scripting & programming experiences is preferred. Experience in RESTFUL web services is a plus. An excellent communication (written and verbal) skill is must. Must have a strong customer service/satisfaction attitude Must have the ability and flexibility to work in a fast-paced, high-pressure manufacturing environment. Education and Experience: Bachelor's in computer related field Powered by JazzHR l0aGIuxgRX

Job Description Responsibilities/Expectations: • Leads the design, implementation, and optimization of electrical systems and power distribution networks supporting critical infrastructure such as pipelines, compressor stations, and storage facilities, • Champions the integration of advanced technologies including automation, real-time monitoring, and energy storage to enhance system performance and reduce operational costs, • Implements robust safety measures such as arc flash mitigation and fault detection systems to protect personnel and ensure infrastructure reliability, • Provides technical expertise in power distribution, electrical schematics, and system layouts for both new construction and upgrades to existing facilities, • Manages complex engineering projects from concept to completion ensuring alignment with business goals timelines and budget constraints, • Ensures compliance with all relevant safety, environmental and regulatory standards across electrical systems and project execution, • Collaborates with cross-functional teams to deliver engineering solutions that meet internal and external customer needs, • Required: Bachelors degree in electrical engineering and eight (4) years engineering experience in natural gas, data centers or related industry, • Preferred: PE License, • Demonstrates excellent organizational/interpersonal skills and safety as a main priority, • Proficiency in Microsoft Office Application and PC skills?, • Power Generation and Controls experience, • Proficiency in reviewing arc flash studies and implementing improvements, • Working knowledge of electrical design codes (NEC, NEMA, API, IEEE, etc.)?, • Preferred: Experience with PLCs?, • Preferred: Project Management experience?, • Preferred: Experience working in Preliminary-Front End Engineering and Design (Pre-FEED), Front End Engineering Design (FEED), or Engineering, Procurement, Construction (EPC) of small to medium facility projects, • Preferred: Proficiency in designing, and implementing, Instrumentation systems, including Programmable Logic Controllers (PLC) and Human Machine Interface (HMI) systems

Job DescriptionPurpose of the position Supplier management & issue handling & customer service Duties and Responsibilities：： • Supplier Development & Qualification, • Conduct supplier audits and assessments to ensure compliance with quality standards, • Develop and maintain supplier quality agreements to align with regulatory and corporate requirements, • Quality Issue Resolution & Corrective Actions, • Investigate supplier-related defects using structured problem-solving methods (8D, 5Why, CAPA), • Drive root cause analysis and verify corrective/preventive actions to prevent recurrenc, • Manage non-conformance reports (NCRs) and ensure timely supplier response, • Supplier Performance Monitoring & Improvement, • Define and track supplier Key Performance Indicators (KPIs) such as PPM (Parts Per Million), defect rates, and on-time delivery, • Conduct periodic supplier scorecard reviews and implement improvement plans, • Facilitate supplier training on quality standards, statistical process control (SPC), and measurement system analysis (MSA), • Quality System & Process Compliance, • Ensure suppliers adhere to APQP (Advanced Product Quality Planning), PPAP (Production Part Approval Process), and FMEA (Failure Mode and Effects Analysis), • Validate supplier manufacturing processes (e.g., GR&R, DOE, process capability studies), • Support internal and external audits (e.g., ISO, customer-specific requirements), • Cross-functional Collaboration & Customer Support, • Work with internal teams to align supplier quality with product design (DFM/DFQ) ., • Address customer complaints related to supplier quality and ensure timely resolution ., • Participate in New Product Development phases to mitigate quality risks earlyEducation and work experience, • Bachelor’s degree in Engineering (Mechanical, Electrical, Material, or related field)., • 2+ years of supplier quality experience in consumer electronics manufacturing and product analysis., • Proficiency in quality tools (SPC, FMEA, MSA, Six Sigma), • Strong communication skills for global supplier interactions (fluency in English required; additional languages a plus)Working conditions, • Office-based role, fast-paced work environment, • This position must be able to respond to after-hour emergencies and be available to work non-core hours or overtime to complete various projects without interruption to operations.Skills:, • SQE working experience in SMT/Test/Assembly factory required., • Proficient in reading, writing and speaking English., • Proactive in work and strong resilience., • PMP certificate are preferred. g6PDq0b3jD

Job Description Jungheinrich is a family-owned company based out of Hamburg, Germany with more than 21,000 employees in 42 countries. Jungheinrich ranks permanently among the world's leading material handling solution providers. Together with our partner Mitsubishi Logisnext Americas Inc. (MLA) we are successfully expanding our activities in the North American market. Position Summary The Electrical Design Engineer will be based in Houston and play a key role within the Product Development and Construction team. This international, permanent position is available immediately and offers the opportunity to work on innovative mobile machinery projects. The engineer will collaborate closely with mechanical, hydraulic, and test engineers to meet project goals, while also engaging with external suppliers and internal manufacturing teams to bring products into production. The role involves troubleshooting and resolving issues for both new and existing products, ensuring smooth transitions from design to deployment. Occasional travel is required for this position. Responsibilities This role includes the design of parts and simple assemblies within defined boundary conditions, as well as the creation of electrical schematics and harnesses. The engineer will be responsible for specifying hardware and software to control trucks, incorporating all safety features and accessories. Additional duties include creating drawings and bills of materials (BOMs) in accordance with company standards, supporting prototype and field test equipment during construction and commissioning, and coordinating development tasks with suppliers. The engineer is expected to contribute to continuous improvement efforts and support cross-functional collaboration throughout the product lifecycle. Qualifications and Experience • Bachelor's degree in electrical engineering, • Hands-on experience with cradle-to-production design and testing of electrical systems (0–3 years preferred), • Experience in mobile machine design is a plus, • Hands-on experience with electronic testing equipment (oscilloscopes, signal generators, programmable load, etc.)., • Proficiency with SAP, E3 Series 2014, and DOORS, • Familiarity in 3D CAD, ideally CATIA V5, • Knowledge of CAN/CAN open protocols and tools such as CANalyzer or CANoe, • Strong command of Microsoft Office tools, • Self-motivated and proactive in learning, • Flexible and adaptable to shifting priorities, • Strong team player with a collaborative mindset, • Excellent communication and documentation skills, • Capable of working independently and managing multiple tasks, • Analytical thinker with structured problem-solving abilities, • Comfortable in a dynamic, multicultural environment Job Posted by ApplicantPro

Job DescriptionDescription: We are ERock! Enchanted Rock is a leader and innovator in distributed energy. Enchanted Rock has responded to long-term trends in electricity by becoming the first smart-grid supplier to US energy consumers. The company installs, operates, and integrates its highly flexible, low-cost, and quick-response distributed generation to increase reliability and stability, reduce costs and decrease carbon footprint. At Enchanted Rock, our backup generators ensure that customers will never be without power, allowing their business to operate normally when there is an outage in the area. Our innovative approach provides customers with highly reliable, ultra-clean backup generation at a fraction of the cost of traditional backup solutions. We seek those who share our commitment to customer service, innovation, and ingenuity. We are actively recruiting candidates to participate in our 2026 Summer Internship program. This program is roughly 12 weeks in length and will immerse you into the culture and operations of Enchanted Rock. Key Responsibilities: • Supporting the design of microgrid and power system concepts for customer proposals, • Assisting with electrical system layouts, block diagrams, and single-line diagrams, • Learning how engineers size equipment and evaluate system reliability and availability, • Helping prepare technical content for proposals and presentations, • Participating in conceptual design discussions with engineers, sales teams, and project teams, • Shadowing engineers during design reviews and internal presentations, • Pursuing a bachelor’s degree in electrical engineering, power engineering, mechanical engineering, or engineering technology, • Have completed at least sophomore-level coursework (junior/senior preferred), • Are curious, detail-oriented, and willing to ask questions, • Enjoy solving problems and learning how things work, • Introductory knowledge of power systems, • Exposure to AutoCAD, MS Office, or similar tools, • Collaborative, open-office environment, • Mentorship from experienced engineers, • Work on mission-critical infrastructure, • Get exposure to large-scale, real-world engineering, • Learn how engineering connects to business, cost, and execution, • Build experience that stands out on your resume This position will report to the Solutions Engineering Director and will last for the duration of June-August 2026. Interns are required to be eligible to work full-time (40 hours). This internship is based out of our headquarters in Houston, Texas. Do you have what it takes to join the Enchanted Rock team? Send us your cover letter and resume today. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education — to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values specifically our value of “The Team” which includes “Mutual Respect, Openness, and Honesty.”

Job DescriptionPurpose of the positionManage the full lifecycle of company assets, including equipment/fixture procurement, customs clearance/importation, and ongoing asset tracking. This role ensures cost-effective sourcing, compliance with import regulations, and optimal utilization of physical assets. Duties and Responsibilities • Procurement & Budgeting: Monthly collect spare parts/consumable demands, develop procurement budgets, create PN in systems, write PR and track ETA, • Prepare and submit accurate customs documentation (e.g., commercial invoices, packing lists) for imported equipment/jigs. Address customs audits, disputes, or duty refund claims proactively., • Inventory Management: Monitor spare parts and consumable stock levels, set reorder points, and conduct regular inventory counts/reconciliations. Optimize inventory turnover and minimize obsolescence/carrying costs., • Conduct regular physical audits, reconcile discrepancies, and generate reports on asset utilization, costs, and lifecycle status., • Manage end-of-life processes, including resale, recycling, or disposal of obsolete assets in compliance with environmental/safety standards., • Collaboration & Documentation: Partner with engineering, production, procurement, and finance teams; maintain SOPs and asset reports.Education and work experience, • Bachelor’s degree in Mechanical/Electrical/Industrial Engineering, Supply Chain Management, or related field. Master’s degree is a plus., • 2+ years of equipment/asset management, procurement, or inventory control experience (manufacturing/industrial preferred)., • Proficiency in ERP systems (SAP/Oracle/NetSuite) and U.S. import/CBP compliance knowledge., • On-site work in a temperature-controlled manufacturing facility with designated cleanroom areas for precision equipment; compliance with ESD (Electrostatic Discharge) protection standards., • May require occasional weekend hours to support production plan, emergency repairs, or project implementation. Skills:, • Proficiency in procurement tools and MS Office., • Strong analytical, negotiation, and problem-solving abilities. W34sGUotJL

Job Description Propulsion Engineer – Fluid Systems (LDN Satellite Fleet) Houston, TX About Intuitive Machines Intuitive Machines is an innovative and cutting-edge space company making cislunar space accessible to both public and private customers. We believe our mission is to further research, communications, and exploration beyond low lunar orbit. With multiple NASA lunar missions in the making and additional private missions on our manifest, we pride ourselves in supporting NASA, our customers, and the nation in paving the way to return humans to the surface of the moon. Our world-class team includes experts in all spacecraft subsystems design, development, and test, on-orbit operations, and safety. About the Role We are seeking a Propulsion Engineer to support propulsion system development and verification for the Lunar Data Network (LDN) program. In this role, the engineer will design, build, and operate a flight-representative water flow test stand used to verify propulsion system fluid behavior and validate analytical models that inform flight hardware design. The LDN satellite constellation supports NASA’s Artemis program and future commercial missions by providing navigation, communications, and data services around the Moon, enabling sustained human and robotic exploration. Beyond this initial focus, the role contributes to propulsion system development across the full lifecycle, including requirements definition, conceptual design, analysis, hardware build, test, verification, and mission operations support. Scope and ownership scale with experience and program needs. Depending on experience, the position may be filled at the junior engineer or engineer level. The role operates within the propulsion engineering organization and contributes to the broader propulsion engineering team, supporting design, analysis, test, and operations activities across Intuitive Machines’ propulsion system portfolio, including lunar landers, orbital spacecraft, and tugs. Key Responsibilities • Support the design, analysis, and development of propulsion systems and components for space flight across monopropellant, bipropellant, cryogenic, and cold gas architectures., • Contribute to propulsion system requirements development, verification planning, and lifecycle traceability from concept through flight., • Design, build, and operate propulsion system test equipment in support of development, qualification, and acceptance testing, with a strong emphasis on safety and data quality., • Validate analytical and system-level fluid models using test data and support verification closure., • Participate in propulsion hardware integration, anomaly resolution, test readiness reviews, and flight preparation activities., • Document test configurations, procedures, results, and conclusions for program reviews and verification artifacts., • Contribute to broader propulsion engineering activities, including fabrication support, supplier interaction, procurement support, procedure development, and on-console mission operations support.Required Education / Experience / Skills, • Bachelor’s degree in Mechanical, Aerospace, or related Engineering discipline, • Junior Engineer level: Bachelor’s degree (0–1 years of relevant experience), • Engineer level: Minimum of a Bachelor’s degree with 2+ years of relevant experience, or Master’s degree, • Strong fundamentals in fluid mechanics and engineering test methods., • Experience designing, building, or operating laboratory or test hardware., • Ability to develop test procedures and technical documentation., • Experience reducing and interpreting test data., • Proficiency with CAD and engineering analysis tools., • Strong written and verbal communication skills.Preferred / Differentiating Experience, • Background in fluid systems or propulsion testing., • Familiarity with hydrazine propellant systems, including design considerations, handling constraints, or test environments., • Hands-on use of instrumentation and data acquisition systems for test execution and data capture., • Exposure to welding processes, procedures, or inspection., • Experience developing or operating LabVIEW / National Instruments–based test and control systems., • Proficiency in engineering data analysis using MATLAB, Python, or similar tools.