Offres Engineering à Jacksonville, FloridaCréer des alertes d'emploi

Overview: The Field Engineer will oversee and execute the project controls and management of a multiple disciplines. The main functions of the Field Engineer will include (but not limited to) responsibility for a specific area of the project such as direct support to a Craft Superintendent, quantity collection, scheduling, contract administration, project planning and scheduling, procurement, and project reporting. The Field Engineer role requires interfacing with all areas affected by the project including the client(s), engineering/design, subcontractors, distributors, vendors, and the ongoing strategic communication with project management regarding the status of the project. Location & Travel Details: You can be based in any city or state in the U.S.. This is a traveling, project based position, up to 100% of the time. You have the potential to be placed on a project site located in any state throughout the US. You’ll spend 8-18 months on average per project. We offer designated per diem in addition to an excellent base salary to support and help you cover living expenses. This position is eligible for mobilization support (may include mileage reimbursement), and includes one longer weekend every four weeks for additional time at home. COMPANY OVERVIEW: MasTec Industrial, alongside its sister companies Casey Industrial and Phoenix Industrial, has been in operation since 1947. We serve a diverse clientele, including utilities, independent power producers, developers, and municipal utilities. Specializing in projects using natural gas, oil, biomass, and other combustible fuels, our team boasts over 30 years of expertise in the power industry. We provide EPC (Engineering, Procurement, and Construction) services and assist in project development. Our experience spans various systems for utility and industrial facilities, including simple and combined cycle plants, reciprocating engines, and waste-to-energy projects. MasTec Industrial delivers value throughout all project phases, from conceptual design to operations and maintenance. At MasTec Industrial, we are dedicated to delivering the highest quality, safety, and value in every project. We focus on attracting, developing, and retaining top talent within our organization. Our goal is to foster a respectful work environment where all employees feel valued, included, and empowered to become innovative leaders in the industry. The MasTec Industrial market sector is part of the MasTec Clean Energy & Infrastructure business segment. MasTec’s Clean Energy & Infrastructure (CE&I) segment generates over $4 billion in annual revenue, providing construction services across industrial, renewables and infrastructure sectors. In addition to our industrial market sector; In infrastructure, we specialize in general heavy civil construction, underground utilities, structures, electrical work, material production, roadways, bridges, specialty pavement overlays, environmental projects and commercial buildings. Our renewables sector focuses on solar, wind and battery storage. Sustainability and safety are foundational to our culture and influence everything we do. MasTec, a minority-owned Fortune 500 company, has shaped the construction industry for more than 90 years. With over 35,000 employees and 400 offices nationwide, we provide flexibility and career growth in dynamic work environments. Responsibilities: ESSENTIAL JOB FUNCTIONS: • Represent in a professional manner in all client interaction activities., • Provide the client with contract required reports (weekly, monthly, schedule.), • Understand and follow Corporate Safety Plan and site-specific safety plan., • Perform quantity calculations by taking measurements and determining percentage of completed/installed materials and work., • Develop a process for the creation and review of work plans and work packages., • Provide support to ensure the site quality plan is communicated and all inspections and quality documentation is being completed on time and assembled for final turn over., • Manage the compilation, processing, and customer approval of daily labor timesheets., • Compile and distribute weekly the Average Labor Rate to the front-line supervision., • Train craft and staff employees how to complete Job Safety Analysis (JSA’s), • Participate in or lead jobsite safety reviews, toolbox meetings, mass safety meetings, and safety training., • Order, schedule material deliveries and develop procurement status report., • Plan, schedule, and coordinate work groups on the jobsite., • Perform material takeoffs from drawings, specifications, and other contract documents., • Perform basic engineering calculations and technical drafting to support field operations., • Assist Engineers to gather and prepare data for submittal or transmittal to the customer, vendors, subcontractors, governmental agencies, and internal use., • Prepare field issued purchase orders and subcontracts, prepare material buyout take offs from issued for construction drawings., • Direct home office performed procurement and subcontract administration functions., • Provide field support and supervise subcontractor operations., • Manage all project recordkeeping and correspondence functions including daily reports, photographs, requests for information (RFIs), submittal, transmittal, memorandums, and other contract required correspondence., • Create and closely monitor project controls such as productivity tracking including Average labor rate, indirect scheduling, equipment schedule and log, risk, and opportunity log, etc., • Create and maintain master project schedule., • Generate change orders and as-built data to be reviewed by the Project Manager., • Drive the planning process through the master schedule, 6-week, 3-week, 1-week, and manpower curves., • Administering Accounting/Job Costs/Work in Progress (WIP) Updates: Learn and Assist the Project Manager with these activities., • Lead the budgeting process of taking the Estimate and converting it to the Standard Phase codes., • Alert Project Manager and Home Office of trends regarding labor, material, subcontractor and equipment costs., • Accurately manage the cost forecasting process for entire project (labor, materials, subcontractors, equipment.), • Establish the cashflow forecast and curve to ensure positive cashflow for the project., • Act as primary company representative in the absence of or as directed by Project Manager or Project Engineer., • Know the provisions, terms and scope of the Prime contract., • Support a crew of up to 50 people for short periods if needed., • Lead 1-2 Field Engineers., • Bachelor’s degree in engineering, construction management, or related., • Be knowledgeable of MIC Health and Safety programs and project specific regulations., • When on-site, actively participate in daily toolbox meetings with crews and subcontractors., • Set a personal example of safe behavior., • Ability to read, analyze and identify discrepancies on engineering plans, specifications, and contract documents., • Ability to freely access all points of a construction site in wide-ranging climates and environment., • Highly motivated, with a demonstrated passion for excellence and taking initiative., • Strong work ethic, willing to do what it takes to get the job done right the first time., • Demonstrated commitment to ethics and integrity., • Passion for safety, with the ability to help us ensure that nobody gets hurt., • Team player with the ability to work independently to meet deadlines, goals, and objectives., • Willing to travel extensively and relocate to the next project location for an extended period (typically 6-12 months.), • Other may duties may be assigned, • Work up to a 12-hour shift doing hard physical work in varying temperatures and outside conditions., • May need to maintain physical strength and stamina; Use arms, hands, and legs fully; Push, pull, and frequently lift and carry objects weighing up to 50 pounds; and stoop, kneel, balance, crouch, crawl, and climb to perform job tasks., • Stamina to perform this task repetitively and continuously for several hour intervals., • Uncontrolled environmental conditions: Constant change in weather and site conditions., • This work environment may involve moderate exposure to unusual elements, such as extreme temperatures, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises., • Ability to wear personal protective equipment is required (including but not limited to- safety toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.)., • Move in and around confined, cluttered, and uneven areas., • May need to work at heights and must be able to abide by all safety and fall-protection requirements; must be able to wear and utilize all safety equipment required for work at heights., • Evaluate information based on measurable standards; and see details in objects or drawings and recognize slight differences in shapes and shadings., • Visualize objects in three dimensions from drawings., • Keep good balance and work at heights., • See well (either naturally or with correction)., • Hear well (either naturally or with correction.) This position is a Full-Time position scheduled to work typically 50 hours per week. Schedule is subject to projects requirements. TRAVEL: Travel required up to 90%. Position requires presence directly on the Project Site location with intermittent travel to residence of record. What's in it for you: Financial Wellbeing • Competitive pay of $80,000 - $110,000 per year with ongoing performance review, project completion bonus opportunity and merit increases., • 401(k) with company match & Employee Stock Purchase Plan (ESPP), • Medical, Dental, and Vision insurance (plan choice) - coverage for spouse, domestic partner, and children, • Paid Time Off, Paid Holidays, Bereavement Leave, • Military Leave, including Differential Pay and Benefits Continuation, • Short and long-term disability, life insurance, and accidental death & dismemberment, • Voluntary life insurance, accident, critical illness, hospital indemnity coverage, • Emergency Travel Assistance Program, • Group legal plan Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact . Due to the high volume of applications received, we are unable to respond to individual requests regarding application status. Please log into your candidate profile for up-to-date information. MasTec, Inc. is an Equal Employment Opportunity Employer/Disability/Veteran. The Company's policy is not to unlawfully discriminate against any applicant or employee on the basis of race, color, sex, sexual orientation, gender identity, religion, national origin, age, disability, genetic information, military status, or any other consideration made unlawful by applicable federal, state, or local laws. The Company also prohibits harassment of applicants and employees based on any of these protected categories. It is also MasTec's policy to comply with all applicable state, federal and local laws respecting consideration of unemployment status in making hiring decisions. Disclaimer: MasTec and our Subsidiaries will never ask prospective employees for any form of payment or money transfer as part of job application or onboarding. We do not ask prospective employees for information about credit cards or personal passwords, and it does not require applicants to purchase equipment or software. Ensure that all recruiter email addresses end in @mastec.com or @talent.icims.com. If you suspect you are the target of a scam, we advise you to contact your local law enforcement agency and report fraud at ___. MasTec Clean Energy & Infrastructure and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. #LI-MH1 #LI-Onsite Appcast (For Export): #appflash

Description Southern New Hampshire University is a team of innovators. World changers. Individuals who believe in progress with purpose. Since 1932, our people-centered strategy has defined us - and helped us grow a team that now serves over 180,000 learners worldwide. Our mission to transform lives is made possible by talented people who bring diverse industry experience, backgrounds and skills to the university. And today, we're ready to expand our reach. All we need is you. Make an impact - from near or far At SNHU, you'll have the option to work remotely in the following states: Alabama, Arizona, Arkansas, Delaware, Florida, Georgia, Hawaii, Idaho, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Mississippi, Missouri, Nebraska, New Hampshire, New Mexico, North Carolina, North Dakota, Ohio, Oklahoma, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, West Virginia, Wisconsin and Wyoming. We ask that our remote employees have access to a reliable internet connection and a dedicated, properly equipped workspace that is free of distractions. Employees must reside in, and work from, one of the above approved states. The opportunity Southern New Hampshire University (SNHU) is looking for an experienced Senior Python Backend Engineer. You will report directly to the Vice President of AI Engineering and you will engineer the backend systems that power our agentic AI learning platform, empowering human-centered learning for the age of AI. As a backend and platform engineer with data engineering skills, you'll build the infrastructure that powers our AI learning platform. You'll also ensure our Data Science team has the systems they need to measure the effectiveness and guide personalization. You will work remotely from any of our approved States #LI-Remote What you'll do: Agentic backend and data platform** You will design and implement scalable APIs for agent orchestration and learner interaction You will build data pipelines that feed agent evaluation and continuous improvement cycles You will create event streaming infrastructure for real-time learner interaction analysis You will ensure data quality and accessibility for training and evaluating learning agents You will improve data infrastructure for cost and performance in close coordination with Data and ML teams This is a remote position Design and implement rigorous evaluation frameworks to measure agent performance and improve cycles Develop LLM evaluation processes and perform error analysis to identify systemic improvements for agentic learning systems Support instrumentation that makes evaluation relevant (metrics, traces/logs, and analysis workflows) Participate in on-call rotation and incident response for learning platform reliability Contribute to runbooks, postmortems, and reliability improvements as we evolve our operating model What we're looking for: 5+ years production Python experience at scale AWS expertise (Lambda, DynamoDB, S3, Glue, and Athena) Experience with a relational database such as MySQL, PostgreSQL, or Oracle Experience with agentic AI architectures and evaluation frameworks Data pipeline development (streaming and batch) Infrastructure as Code experience (CDK, Terraform) Production SaaS experience, including participation in on-call / incident response Experience in GitHub Actions or similar CI/CD platforms Experience communicating updates and resolutions to customers and other partners) AI-Augmented Development: Active user of AI development tools (GitHub Copilot, Cursor, Claude Code, Codex) with personal projects and evolution over the past 12 months Demonstrated examples of AI-augmented productivity gains Enthusiasm for pushing boundaries of AI-assisted engineering We believe real innovation comes from inclusion - where different experiences, perspectives and talents are celebrated. So if you're wondering whether SNHU is right for you, take the leap and apply. You might be just the person we're looking for. Compensation The annual pay range for this position is $113,908.00 - $182,287.00. Actual offer will be based on skills, qualifications, experience and internal equity, in addition to relevant business considerations. We expect this position to be hired in the following target hiring range $125,868.00 - $170,293.00. Exceptional benefits (because you're exceptional) You're the whole package. Your benefits should be, too. As a full-time employee at SNHU, you'll get: High-quality, low-deductible medical insurance Low to no-cost dental and vision plans 5 weeks of paid time off (plus almost a dozen paid holidays) Employer-funded retirement Free tuition program Parental leave Mental health and wellbeing resources

Description Southern New Hampshire University is a team of innovators. World changers. Individuals who believe in progress with purpose. Since 1932, our people-centered strategy has defined us - and helped us grow a team that now serves over 180,000 learners worldwide. Our mission to transform lives is made possible by talented people who bring diverse industry experience, backgrounds and skills to the university. And today, we're ready to expand our reach. All we need is you. Make an impact - from near or far At SNHU, you'll have the option to work remotely in the following states: Alabama, Arizona, Arkansas, Delaware, Florida, Georgia, Hawaii, Idaho, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Mississippi, Missouri, Nebraska, New Hampshire, New Mexico, North Carolina, North Dakota, Ohio, Oklahoma, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, West Virginia, Wisconsin and Wyoming. We ask that our remote employees have access to a reliable internet connection and a dedicated, properly equipped workspace that is free of distractions. Employees must reside in, and work from, one of the above approved states. The opportunity The Principal ServiceNow Engineer will report directly to the Senior Platform Manager - ServiceNow. You will play a critical role in the growth, stability, and modernization of SNHU's enterprise ServiceNow platform, ensuring the continued best practice of institutional practices it supports. You will be a senior technical leader who balances hands-on engineering with platform level strategy, ensuring that solutions are secure, scalable, reliable, and aligned with long-term platform health. As a steward of the platform, the Principal Engineer leads modernization projects, including technical debt reduction and deprecation replacements, guiding work from discovery through delivery to improve operability, upgrade readiness, and sustainability. You will be a technical bridge between product owners, engineering teams, architects, and vendor partners, the Principal ServiceNow Engineer provides architectural leadership and sets engineering standards across the ServiceNow ecosystem. You will work with partners to deliver new capabilities while maintaining governance, consistency, and platform agreement. You will support any application installed on the platform as the footprint evolves. The Principal Engineer drives shared automation through mentorship, design guidance, and senior level escalation support. This support aligns integration and orchestration patterns, reduces manual operations, and enables secure, reliable outcomes. These outcomes connect platform capabilities to institutional goals and value. You will work 100% remotely from any of our approved states. #LI-Remote What You'll Do: Be a chief technical designer for ServiceNow architecture and solutions, responsible for overall code quality, maintainability, and platform understanding. Establish and enforce engineering standards (patterns, reusable components, security guardrails, logging/telemetry expectations, review practices). Provide design and architecture leadership across evolving products, integrations, and core platform capabilities, ensuring solutions scale and remain upgradable. Lead platform modernization programs end-to-end, including deprecation replacements and removal of legacy patterns/customizations. Document, manage, and govern customizations across the platform; customization risk, tradeoffs, and supportability impacts; and support steering partners in making informed decisions. Carry this forward into roadmap advisory, upgrade planning, and ongoing platform health work. Represent the business capabilities enabled by the platform and connect those capabilities to institutional goals, value, and strategy to guide prioritization and solution design. Provide architectural controls to ensure the correct technical solutions are used when delivering business outcomes, including reviewing developer designs and approaches, recommending platform-aligned patterns, and enforcing guardrails that keep solutions secure, scalable, and upgradeable. Proactively identify upcoming platform changes (deprecated APIs/features, new platform behaviors), assess impact, and create a sequenced remediation plan Own deprecations and migrations from inception to maintenance: introduce upcoming change to product owners, identify impacted groups, coordinate change management activities, update/run testing, ensure inclusion in upgrade preview, and validate post-release outcomes. Operate a platform health program: monitor, report, and improve platform health, performance, usage, and compliance using platform tooling and analytics. Ensure upgrades are predictable and low risk by maintaining remediation quality standards: regression strategy, upgrade preview readiness, automated test coverage, and mitigation planning. Provide advanced troubleshooting, bug fixes, and root cause analysis; guide preventative automation to reduce recurrence and operational toil. Evaluate and promote the value proposition of both adopted and latest ServiceNow products/capabilities, translating platform options into outcomes, tradeoffs, and investment recommendations. Partner with ServiceNow and other vendor/implementation partners to plan and execute discovery efforts (workshops, requirements discovery, solution shaping, and proof-of-concept validation), ensuring outcomes are actionable and aligned to SNHU standards, roadmap, and operability expectations. Document and maintain policies, procedures, and controls for operating the ServiceNow platform and its SDLC. Design, prototype, implement, test, and deploy technical solutions (business rules, client/server scripting, UI policies/actions/pages, scheduled jobs, import/transform, ACLs, notifications, flows as appropriate). Improve delivery reliability through repeatable automation, standardized release practices, and clear "definition of done" expectations (including testing and documentation). Design and support integrations (SSO, CMDB/data sources, SaaS connectors) and integrate legacy systems with ServiceNow using MID Server, APIs, web services, email, chat, and other relevant technologies. Support existing and custom applications within ServiceNow, including integration lifecycle ownership (monitoring, error handling, retry logic, and operational support). Partner with process owners to translate our needs into solutions while reducing variation, eliminating waste, and promoting platform-patterns. Mentor fellow technical resources and ecosystem partners; provide informal coaching and direction while raising overall engineering maturity. Advise on vendor/consulting work (technical direction, quality gates, acceptance criteria, and operational readiness). Be a senior escalation point for incident/ticket resolution and problem remediation and participate in on-call rotation as an escalation point. Use AI-assisted tooling responsibly to accelerate analysis, documentation, and development while observing SNHU's evolving guidance and maintaining rigorous security, privacy, and human review standards. Other responsibilities as assigned or required. What We're Looking For: 10+ years' experience configuring the ServiceNow Platform in an enterprise environment. 7+ years of experience of ServiceNow development. Demonstrated experience leading platform modernization and cleanup programs (technical debt reduction, removal of legacy patterns, or large-scale refactors) Experience leading deprecation replacements/migrations end-to-end, including partner agreement, change management coordination, testing updates, rollout planning, and post-release validation. Experience supporting core ITSM processes: Incident, Problem, Change, Service Catalog/Request, CMDB, and Knowledge. Experience with Integration experience using ServiceNow APIs and common enterprise technologies (SSO/SAML, LDAP, REST/SOAP, JDBC/ODBC, SSL/TLS, file transfer patterns as applicable). Experience building and sustaining a platform health and technical debt reduction program (health scans, remediation backlog creation, prioritization, measurable improvements). Integration architecture skills, including error handling patterns, observability, and operational readiness for enterprise integrations. ITIL Foundation certification (or equivalent ITSM certification). ServiceNow Certified System Administrator (CSA). ServiceNow Certified Application Developer (CAD). ServiceNow Certified Implementation Specialist (CIS). ServiceNow Certified Technical Architect (CTA). We believe real innovation comes from inclusion - where different experiences, perspectives and talents are celebrated. So if you're wondering whether SNHU is right for you, take the leap and apply. You might be just the person we're looking for. Compensation The annual pay range for this position is $125,298.00 - $200,516.00. Actual offer will be based on skills, qualifications, experience and internal equity, in addition to relevant business considerations. We expect this position to be hired in the following target hiring range $138,456.00 - $187,323.00. Exceptional benefits (because you're exceptional) You're the whole package. Your benefits should be, too. As a full-time employee at SNHU, you'll get: High-quality, low-deductible medical insurance Low to no-cost dental and vision plans 5 weeks of paid time off (plus almost a dozen paid holidays) Employer-funded retirement Free tuition program Parental leave Mental health and wellbeing resources

Job DescriptionJoin our team, where you'll be responsible for diagnosing and repairing a variety of small engines in commercial, residential, and handheld equipment. Responsibilities: • Diagnose and repair small engines efficiently., • Perform routine maintenance tasks to prevent breakdowns., • Replace faulty parts and ensure quality components., • Test and inspect equipment for safety and performance., • Maintain accurate records and provide excellent customer service. Qualifications: • Previous small engine repair experience., • Knowledge of diagnostic and maintenance procedures., • Strong problem-solving skills and attention to detail., • Excellent communication and customer service skills. Benefits: • Competitive salary., • 401(k) and health benefits., • Paid time off., • Opportunity for professional development.

RQ is a privately held, full-service design-build firm, specializing in fast-track commercial construction for the Department of Defense, and offering comprehensive solutions that integrate design, engineering, and construction under one roof. Twenty (20) or more years' experience in civil design, p

6-month contract to hire opportunity. Medical, Dental and Vision benefits are made available after 90 days. There are no additional benefits provided during the contract period (no PTO, no Paid Holidays, etc.) Onsite in Jacksonville, FL. This opportunity offers the chance to collaborate with multidisciplinary project teams within the Technology, Commercial & Industrial Market Sector, supporting Distributed Network projects such as Battery Energy Storage Systems (BESS), while building critical civil infrastructure for today’s and tomorrow’s challenges. Civil Engineering Technicians contribute to the planning, design, and implementation of site development, including grading and drainage, erosion control, roadways, fencing, and underground utilities for these advanced industrial and commercial facilities. The Virtual Design & Data Solutions (VDDS) Assistant Civil Engineering Technician plays a key role in supporting the development of high-quality engineering deliverables for these complex infrastructure projects. Under close supervision, this position performs technical tasks requiring advanced knowledge of civil engineering principles and practices, with a focus on creating and modifying site plans, grading designs, and utility layouts using advanced techniques in industry-standard design tools such as Autodesk Civil 3D and Bentley MicroStation. Job Summary • Provides technical support to engineering teams under close supervision, • Performs tasks requiring a basic understanding of engineering principles and practices, • Uses digital tools and design software (e.g., CAD, BIM, 3D modeling) to assist with the creation, modification, and maintenance of technical documents and drawings and project deliverables, • Participates in the evaluation of methods used in the development of deliverables and design activities to support continuous improvement and efficiency Key Responsibilities • Continuously learns and applies established standards, systems, document control practices, departmental guidelines, and BV policies and procedures., • Ensures deliverables are accurate and compliant by developing knowledge of the BV Quality Program., • Demonstrates strong personal accuracy and supports continuous improvement and change management initiatives., • Expands technical knowledge to modify and develop less complex deliverables using various design inputs., • May assist with minor technical tasks, such as material quantity estimates and dimensional checks., • May assist with coordination of deliverables with other project disciplines to reduce errors and interferences., • Prioritizes internal client needs while developing a basic understanding of external client drivers and expectations., • Proactively seeks out and shares knowledge of emerging technologies and processes Preferred Qualifications Diploma or Certificate required. Associate Degree in Drafting or an Engineering Design Related Technology preferred. Minimum Qualifications • Typically a minimum of 1 year related work experience.

Civil Designer About our client... Our client is a respected structural and civil engineering firm based in Jacksonville, FL, known for delivering practical, efficient, and buildable engineering solutions. The team partners closely with architects, contractors, and developers across Florida and the Southeast, providing high‑quality engineering design with a strong emphasis on responsiveness, accuracy, and client service. Position Overview We are seeking a detail‑oriented CAD Designer to support structural and civil engineering projects. This role is ideal for someone who enjoys producing clean, accurate drawings, collaborating with engineers, and contributing to projects ranging from commercial buildings to residential structures and site‑related civil work. The CAD Designer will work directly with the engineering team to prepare plans, details, and construction documents using AutoCAD Civil 3D (and potentially Revit, if applicable). Key Responsibilities • Produce high‑quality structural and civil engineering drawings, including plans, sections, elevations, and construction details., • Convert engineering sketches, markups, and design concepts into accurate Civil 3D CAD models and drawings., • Maintain drawing standards, file organization, and project documentation., • Coordinate with engineers to ensure drawings reflect design intent and meet project requirements., • Assist with revisions, redlines, and updates throughout the project lifecycle., • Support the preparation of permit sets, construction documents, and client deliverables., • Communicate proactively with the engineering team to resolve design or drafting issues., • Ensure all work complies with company standards and applicable codes. Qualifications Required: • 3+ years of experience as a CAD Designer, Drafter, or similar role in engineering or architecture., • Proficiency in AutoCAD Civil 3D (Civil 3D or Revit experience is a plus)., • Strong understanding of drafting standards, layers, line weights, and drawing organization., • Ability to read and interpret engineering drawings and specifications., • High attention to detail and commitment to producing accurate work., • Strong communication and teamwork skills. Preferred: • Experience in structural or civil engineering environments., • Familiarity with construction methods, building materials, and engineering terminology., • Experience preparing permit‑ready drawing sets. Why Join Our Team... • Opportunity to work closely with experienced structural and civil engineers., • A collaborative, small‑team environment where your work has real impact., • Newly remodeled office in Southside Jacksonville, FL, • Exposure to a wide variety of project types across Florida and the Southeast., • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Vision insurance Work Location: In person

Job Description: Key Responsibilities • Aid in development and execution of qualification documentation, including IQ, OQ, and PQ protocols for lidstock and heat-seal processes., • Lead and support the implementation, qualification, and validation of new raw materials for the production lines under the direct supervision of J&J stakeholders., • Review and maintain controlled documentation (e.g., quality procedures, test methods, and specifications) in support of process and product validation., • Support process characterization and qualifications by assisting in preparing and executing protocols, test suites, and supporting documentation., • Manage and support change control activities for lidstock and heat-seal processes, ensuring appropriate risk assessment and documentation updates., • As needed, perform and document risk assessments and provide technical input to investigations, deviations, CAPAs, nonconformances, and qualification activities; support root cause analysis for manufacturing equipment, processes, and systems., • Ensure adherence to the Quality Management System (QMS), maintaining compliance with FDA 21 CFR 820, ISO 13485, GxP, and other applicable regulatory and internal requirements., • Provide support for issue resolution, including investigations, bounding/containment, action tracking, and review/approval of nonconformances, CAPAs, and audit responses. Responsibilities:\ • The Quality Validation Engineer will lead and support validation and qualification activities for lidstock and heat-seal processes and related raw materials, ensuring compliant execution of IQ/OQ/PQ documentation, robust change control, and alignment with the Quality Management System (QMS)., • Author, review, and execute qualification documentation (IQ/OQ/PQ protocols and reports) for lidstock and heat-seal processes, ensuring traceability to requirements and acceptance criteria., • Lead and support implementation, qualification, and validation of new raw materials and process changes for production lines under the direct supervision of J&J stakeholders., • Support process characterization activities by preparing test strategies, data collection tools, and executed test records; compile, analyze, and summarize results to support qualification conclusions., • Manage and support change control activities (change requests/records), including impact assessment, risk assessment (e.g., FMEA), implementation actions, and required documentation updates., • Review, maintain, and improve controlled documents (quality procedures, test methods, and specifications) in support of process and product validation., • Ensure qualification/validation packages are complete and compliant, including executed protocols, deviation documentation, investigations, final reports, and approvals per the QMS., • Provide technical input to investigations, deviations, nonconformances, and CAPAs, including containment/bounding, root cause analysis, action effectiveness, and timely closure., • Ensure day-to-day activities align with applicable requirements (FDA 21 CFR 820, ISO 13485, GxP) and support internal/external audits through documentation readiness and response support. Required Experience: • Hands-on experience supporting validation deliverables and technical documentation (DOE, IQ/OQ/PQ protocols and reports)., • Experience submitting test documentation and managing change requests/change control in a regulated quality system., • Experience conducting nonconformance investigations, root-cause analysis, and CAPA support., • Experience in a regulated industry (medical device preferred) with familiarity with FDA expectations., • Working knowledge of statistics and Design of Experiments (DOE), including basic data analysis and interpretation., • Six Sigma certification (Green Belt/Black Belt) is a plus., • Strong analytical skills, including risk assessment and attention to detail in technical documentation., • Ability to work independently, communicate effectively with stakeholders, and manage priorities; project management experience is preferred., • Proven ability to work in a cross-functional matrix environment, build strong relationships, and serve as a subject matter expert when needed., • Flexible and able to manage multiple priorities; willing to adjust schedule as required by business needs. Required Qualifications : Bachelor’s in engineering Primary focus areas: Materials, Mechanical, Industrial, Chemical Engineering or Equivalent Minimum 2-5 years of significant engineering and/or operational experience is required. Experience with successfully performing IQ/OQ/PQ Qualifications and Change Request Management highly preferred.

The Manager plans and directs all mechanical engineering work from product development to production, and ensures all mechanical engineering work, initiatives, and processes meet the requirements set by customers and our internal standards. The manager also assists in proposal, quality assurance, procurement, and manufacturing. The Mechanical Engineering Manager also provides technical guidance to lower-level engineers and drafters. About the Role Essential Job Functions Oversee all mechanical engineering efforts from product development to successful delivery. Responsibilities • Manage workload, analyze, and anticipate staffing requirements., • Provide recommendations regarding employment, perform employee evaluations, and if necessary, performance counseling., • Works with program management to develop cost and schedule baselines and targets., • Develop and implement processes that improve efficiency and enhance productivity., • Assist in improving the workflows in Product Data Management (PDM)., • Assist in improving the Configuration Management Plan (CM)., • Participate in Change Control Boards (CCB)., • Support proposal development, quality assurance, procurement, and manufacturing., • Provide routine status updates/reports to the Director of Engineering, Vice President of Engineering, and Program Managers., • Manage customer communication as necessary., • Ensure all designs meet internal and external customers' requirements and design standards., • Evaluate final product's overall performance, reliability, and safety., • Assists in creating production drawings and preparing files for machined parts, sheet metal fabrication, and assemblies., • Provides mentoring, leadership, and technical guidance to mechanics and technicians., • Routinely communicate with production and manufacturing personnel to improve design and assembly., • Participate in equipment and tooling selection and purchasing., • Must be capable of safely handling government-furnished equipment and materials., • Must be available to work a standard weekly schedule with overtime as required., • Performs other duties as required. Qualifications • Bachelors' degree or higher in Engineering, Business Administration, or Mechanical Engineering is preferred., • Six (6) years of applicable mechanical engineering design experience., • Three (3) years of experience in direct management is preferred., • Manufacturing experience in machining, sheet metal fabrication, welding, and assembly is preferred., • Fixed wing and/or rotary wing airframe structural and hydraulic systems experience is a plus., • Prior military with aviation maintenance experience is a plus., • Working knowledge of 3D scanning equipment and 3D printing is a plus. Required Skills • Experience in managing a diverse group of employees., • Knowledge of engineering development processes., • Must have a working knowledge of AutoCAD and SolidWorks., • Must have knowledge of GD&T, ASME Y14.100, Y14.5, and MIL-STD-100G standards or current equivalent., • Knowledge of military land, air, sea, structural, and hydraulic systems., • Ability to communicate and interact effectively at all levels in the organization and with customers., • Ability to manage multiple projects., • Working experience with product Data Management (PDM), product lifecycle management (PLM), and finite element analysis (FEA)., • Understanding of core concepts, including mechanics, kinematics, thermodynamics, materials science, etc., • Must have knowledge of various fabrication and assembly, including metal machining, sheet metal fabrication, and welding., • Knowledge of industry and military specifications for materials, parts, and processes preferred., • Must have creativity, innovation, and commitment to excellence with the ability to work in a diverse and fast-paced environment., • Must work well in a team environment., • Must be eligible to obtain security clearance when required., • Must be able to travel. Preferred Skills • Prior military with aviation maintenance experience is a plus., • Working knowledge of 3D scanning equipment and 3D printing is a plus.

Job Title: Quality Engineer Location: Jacksonville, FL Type: Contract-to-Hire / Direct Hire Overview: Responsible for developing and maintaining quality standards, driving process improvements, and ensuring product and manufacturing quality. Works closely with manufacturing, customers, and suppliers to resolve issues and support continuous improvement. Key Responsibilities: • Develop and maintain quality systems, inspection plans, and standards, • Perform root cause analysis and corrective actions (8D methodology), • Monitor quality performance using statistical analysis and SPC tools, • Handle non-conformances, MRB activities, and failure investigations, • Collaborate with manufacturing and represent Quality in daily production meetings, • Interface with customers and suppliers; manage quality issues and audits, • Support product development, process improvements, and compliance requirements, • Bachelor’s degree in Engineering or related field, • 3+ years of quality engineering experience (manufacturing exposure required), • Experience in customer-facing roles and handling escalations, • Strong analytical, problem-solving, and communication skills, • Experience with statistical tools, inspection methods, and quality systems, • Aerospace industry experience, • ASQ certification Proactive, detail-oriented, strong communicator, and confident in challenging processes for improvement

Job Overview: Toyota Automated Logistics is seeking Regional Project Engineer to support customer projects in Florida. Project Engineers work closely with Field Application Engineers to create proposals, design material handling systems and manage projects. Project Engineers at Toyota Automated Logistics are given a high level of responsibility and autonomy to make decisions. This role allows you to work with some of the latest technologies in the ever-changing material handling field including robotics, mobile robotics, autonomous vehicles, AGV’s, and more. If you are looking for a challenging career in a field that will never stop evolving, we want to talk to you! Travel Requirements: • 25-30% overnight travel (Travel expenses paid by Toyota Automated Logistics), • Must maintain a valid drivers license Job Functions: • Time will be spent in system design, site supervision, troubleshooting and project management., • Maintain budget, schedule, and implementation plan of projects, • Assist with AutoCAD drawings, quotes, spare parts orders, and other general design responsibilities, • Improve project execution processes (Gantts, continuous improvement), • Timely resolution of issues and customer satisfaction with Support, • Assist with site installation to include material inventory, schedule tracking, and supervising subcontractors, • Work directly with Field Application Engineers to ensure a smooth transition of projects, • Develop in depth understanding of all facets of material handling to include equipment, suppliers, and applications, • Inform all stakeholders and subcontractors of any project/schedule changes, • Provide Customer support for ongoing and warranty projects Preferred Skills and Required Qualifications: • Must be eligible to work in the USA long term without sponsorship., • Bachelor’s degree in engineering required. Mechanical, Industrial, Systems disciplines preferred., • 3-5 years’ experience; automated material handling sector preferred, • Experience with AutoCAD or similar software, • Experience interacting with customers, external contractors, • Project tracking (MS Project or similar software is a strong plus), • Demonstrated leadership skills, • Excellent technical problem-solving capability (hardware, controls), • Strong scheduling and organizational skills, • Willing and transparent communicator, • Team player, customer-focused mindset, • Employees must follow all information security policies, protect confidential data, complete required training, and report any suspected security incidents to support our information security controls. About Toyota Automated Logistics: Toyota Automated Logistics is your global partner for integrated warehouse automation. Our team combines the talents of Bastian Solutions, Vanderlande’s warehousing business and viastore under one brand to deliver scalable systems, intelligent software and life-cycle services. In addition to exciting work at a growing company, we offer the following benefits: • Health, Dental, and Vision Insurance, • 401(k) Retirement Plan with a company match, • Vacation / Holiday Pay, • Paid Volunteer time off, • Tuition Reimbursement, • Professional Associations, Conferences and Subscriptions, • Company Meetings & Events Toyota Automated Logistics does not work with outside recruiting agencies. No solicitation phone calls please.

We are Problem Solvers. Innovators. Together, always looking for a better solution for our clients. H2Engineering is focused on being a collaborative organization consisting of engineers who are ready to take on some of architectural engineering’s greatest challenges and make an impact on the built environment. At H2Engineering, we tackle complex building challenges through collaboration, creativity, and smart engineering. We’re seeking an experienced Fire Protection Engineer (PE) to join our team in a remote role supporting projects across North Florida. This position is remote, with candidates required to reside in Florida, within the Panhandle to Jacksonville to Gainesville region, to support coordination and occasional site visits. As a member of this fast-paced and highly motivated team, you will use your creativity and diverse range of engineering training to explore solutions to a variety of building system problems. The Fire Protection Engineer will participate in the production, design, and construction phases of the project on a diverse range of building types. The candidate will work cross-functionally with other disciplines and multiple project teams. If you get excited about problem-solving and innovative thinking, then H2Engineering is for you. What you’ll do: • Design and support fire protection and life safety systems, • Prepare and seal calculations, drawings, and technical reports, • Apply NFPA, IBC, and Florida Building Code requirements, • Collaborate with architects, MEP teams, clients, • Support projects from design through construction What we are looking for: • Active Professional Engineer (PE) license in Florida, • Active Fire Protection Engineer license in Florida, • 5–10 years of fire protection engineering experience, • Strong knowledge of NFPA and building codes, • Experience with fire sprinkler and fire alarm systems, • Revit experience preferred, • Bachelor’s degree in engineering, • H1B sponsorship not available Project Types K-12 Schools | Higher Education | Commissioning | Correctional | Historical Remote – Must live in North Florida (Panhandle → Jacksonville → Gainesville) If you’re a licensed Fire Protection Engineer who enjoys solving real-world problems and working on impactful projects, we’d love to connect.

Job Description Join Our Team as a Maintenance Technician – Jacksonville, Florida. We are looking for a skilled and dependable Maintenance Technician to join our hospitality team in Phoenix, Arizona. This role is essential to keeping our property safe, functional, and welcoming for all guests and staff. If you have strong technical skills and enjoy problem-solving, this is the right opportunity for you. Position: Maintenance Technician Location: Jacksonville, Florida. Responsibilities: * Perform routine maintenance and repairs on hotel equipment, systems, and facilities. * Troubleshoot and resolve issues with electrical, plumbing, HVAC, and mechanical systems. * Conduct preventive maintenance to minimize downtime and extend equipment life. * Respond promptly to guest service requests and maintenance calls. * Maintain tools, supplies, and work areas in a safe and organized manner. * Follow all safety guidelines and report hazards as needed. Requirements: * Previous experience in general maintenance, facilities, or a similar role. * Knowledge of basic electrical, plumbing, HVAC, and carpentry. * Strong problem-solving skills and attention to detail. * Ability to work independently and as part of a team. * Flexibility to work different shifts, including weekends if required. * Physical ability to lift, bend, and stand for extended periods. What We Offer: * Competitive pay * Supportive and professional work environment * Opportunities for growth within the hospitality industry * Recognition for hard work and dedication If you take pride in your technical skills and enjoy contributing to a safe and well-maintained environment, apply today to join our team in Jacksonville, Florida.

Join Brooksource – Where Relationships Drive Success June 2026 Start Date At Brooksource, the flagship brand of Eight Eleven Group, we’re changing the game in human capital solutions for the IT industry. As a trusted partner to Fortune 500 companies, we focus on building strong relationships, solving complex challenges, and delivering lasting results. If you’re motivated by growth, impact, and building meaningful connections, this is your opportunity to thrive. What You’ll Do: As an Associate Account Executive, you’ll enter our comprehensive B2B Sales Training Program, designed to set you up for success in selling consulting and professional services. • Target Key Accounts: Strategically pursue opportunities within 3-5 designated accounts., • Build Relationships: Develop long-term partnerships through client meetings, presentations, and social engagements., • Consult & Deliver Solutions: Create tailored strategies that drive positive client outcomes., • Executive Engagement: Present to C-suite leaders, advocating for impactful solutions., • Achieve Results: Meet and exceed sales targets, setting goals alongside your manager and team. Training & Development: Our multi-phase training program is designed to set you up for success: • Sales Foundations & Readiness: Learn core sales skills and strategies., • Role-Playing & Mentorship: Gain hands-on experience through role-playing and shadowing Senior Executives., • Client Portfolio Development: Build lasting executive relationships and grow your portfolio., • Continued Education: Ongoing training as you progress in your career. Perks & Benefits: • Compensation: Base salary plus uncapped commission., • Stipends: Monthly smartphone and car allowance., • Health & Wellness: Full benefits (medical, dental, vision, HSA) and 401k match., • Paid Time Off: Generous vacation, sick, and personal days; 1 PTO day per quarter for volunteering., • Recognition & Rewards: All-expenses-paid trip for top performers, plus an expense budget for client entertainment., • Development: Access to Eight Eleven University and a personal financial concierge. What You’ll Need to Succeed: • Competitive drive with a results-oriented mindset., • Excellent communication and relationship-building skills., • Entrepreneurial spirit and eagerness to learn., • Ability to thrive in a fast-paced, team-focused environment., • Bachelor’s degree. Ready to Make an Impact? Apply today to join a dynamic, high-performance team that’s committed to driving results and fostering your growth. EEO Statement: Eight Eleven Group provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, national origin, age, sex, citizenship, disability, genetic information, gender, sexual orientation, gender identity, marital status, amnesty or status as a covered veteran in accordance with applicable federal, state, and local laws. Pay Disclaimer: The pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Kelly Services is currently seeking a Quality Validation Engineer position for one of our top clients in Jacksonville, FL. Quality Validation Engineer Jacksonville, Florida Pay starts at $45/hr +/- DOE Benefits (medical, dental, vision) + paid time off The Quality Validation Engineer will lead and support validation and qualification activities for lidstock and heat-seal processes and related raw materials, ensuring compliant execution of IQ/OQ/PQ documentation, robust change control, and alignment with the Quality Management System (QMS). • Author, review, and execute qualification documentation (IQ/OQ/PQ protocols and reports) for lidstock and heat-seal processes, ensuring traceability to requirements and acceptance criteria., • Lead and support implementation, qualification, and validation of new raw materials and process changes for production lines under the direct supervision of Client stakeholders., • Support process characterization activities by preparing test strategies, data collection tools, and executed test records; compile, analyze, and summarize results to support qualification conclusions., • Manage and support change control activities (change requests/records), including impact assessment, risk assessment (e.g., FMEA), implementation actions, and required documentation updates., • Review, maintain, and improve controlled documents (quality procedures, test methods, and specifications) in support of process and product validation., • Ensure qualification/validation packages are complete and compliant, including executed protocols, deviation documentation, investigations, final reports, and approvals per the QMS., • Provide technical input to investigations, deviations, nonconformances, and CAPAs, including containment/bounding, root cause analysis, action effectiveness, and timely closure., • Ensure day-to-day activities align with applicable requirements (FDA 21 CFR 820, ISO 13485, GxP) and support internal/external audits through documentation readiness and response support. Experience: • Hands-on experience supporting validation deliverables and technical documentation (DOE, IQ/OQ/PQ protocols and reports)., • Experience submitting test documentation and managing change requests/change control in a regulated quality system., • Experience conducting nonconformance investigations, root-cause analysis, and CAPA support., • Experience in a regulated industry (medical device preferred) with familiarity with FDA expectations., • Working knowledge of statistics and Design of Experiments (DOE), including basic data analysis and interpretation., • Six Sigma certification (Green Belt/Black Belt) is a plus., • Strong analytical skills, including risk assessment and attention to detail in technical documentation., • Ability to work independently, communicate effectively with stakeholders, and manage priorities; project management experience is preferred., • Proven ability to work in a cross-functional matrix environment, build strong relationships, and serve as a subject matter expert when needed.

Job Description Location: Columbus, Ohio and Jacksonville, Florida areas are preferred. Compensation Range: $108,000 – $116,000, commensurate with experience and qualifications We’re seeking a highly skilled Data Architect to lead the design, implementation, and support of data solutions that power our Artificial Intelligence, Machine Learning, and enterprise database environments. You’ll collaborate with business stakeholders to ensure data solutions meet both technical and organizational objectives. What You’ll Do • Work with the Manager, Data Science to partner with various business verticals to define analytical needs and to identify the relevant data to build models for BI, AI and ML provided inferences., • Design, develop, test, document, and implement scripts to automate data importing, exporting, reporting, and analysis to ensure data availability and integrity to support the digital efforts including AI/ML., • Research and evaluate technologies to support data needs for AI and ML solutions., • Identify opportunities to expand the Corporate One database architecture. Apply innovation and creative thinking to identify new potential database tools and technologies for the Corporate One database architecture that will improve services to the organization and/or its customers., • Work closely with Corporate One teams to curate and prepare data for training the AI/ML models. Provide guidance on appropriate algorithms and to maximize the transaction costs to the AI/ML data interfaces., • Proactively keep up with the new and trending technologies related to AI, ML, Data Lakes and databases., • Support Software Engineers to create and provide API to the created BI, AI or ML. What You Bring • Bachelor’s degree in Computer Science, Engineering, or related field (or equivalent experience)., • 7 years of related progressive experience with database management, optimization, backup and recovery., • 5 years of experience in a leadership role providing database solution recommendations., • 1 year of experience with data clean up and preparation for AI or ML., • Hands on experience with Azure Data Factory/Fabric, App Insights, Microsoft SQL, Oracle, Cosmos DB, Power BI, Power Apps, Power Automate., • Hands on experience in database design, including permissions, triggers, stored procedures, indexing, security, log shipping or replication, data integration and data transformation solutions. About Corporate One: We are a leading wholesale financial services provider to more than 700 credit unions nationwide. For over 70 years, we’ve delivered innovative investment, funding, and payment solutions to help credit unions and their communities thrive. Alongside our CUSOs – Lucro Commercial Solutions and Accolade Investment Advisory – we’re committed to empowering our members’ success. Why Join Us? • Organizational Strengths: Corporate One is one of the nation’s largest and most progressive corporate credit unions with more than $7 billion in assets and an average staff tenure of 10+ years, • Compensation & Benefits: Corporate One offers competitive compensation, a generous 401(k) matching, and quality health and ancillary benefits, • Work-Life Balance: Generous PTO (Paid Time Off) starting with 4 weeks/year, 11 paid holidays, and paid parental leave, • Learning and Development: We provide a full library of online training as well as group and individual training, a mentoring program, and business coaching, all focused toward helping you grow and be successful., • Extra Perks: Tuition reimbursement, wellness program, pet insurance, flexible dress code, and more! Ready to take the next step? Apply now or share with someone who’d be a great fit! Corporate One Federal Credit Union is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, disability, age, or veteran status.

Job Description Pharma-Bio Serv, a global consulting firm headquartered in Puerto Rico, has been dedicated exclusively to providing services to the largest biotechnology & bio-engineering companies within the regulated industry for over 30 years. Since our inception, our services have resulted in project experience level and personnel resource base ranking among the highest worldwide. Currently, one of our clients in the Medical Device sector is looking to hire a Computer System Validation (CSV) Consultant position in Jacksonville, Florida. Job Description and Qualification: • 5 -10+ years of Computer systems validation (CSV) experience in computerized equipment within manufacturing systems., • Author, review and approve GxP computer system lifecycle documentation such as URS, FRS, CS/DS, risk assessments, validation plan, test protocol, summary reports and RTM., • Development of Periodic Review assessments, including gathering required data, evaluation of data and write and approve the periodic review report., • Develop and execute test protocols and test scripts (IQ/OQ/PQ) for computerized systems., • Knowledge of regulatory requirements and standard best practices, (e.g. GLP/GMP, 21 CFR Part 11, Annex 11, GAMP5) with respect to computerized systems and data integrity., • Write and provide support for all CSV related deviations, discrepancies and change control documentation.

Job Description Onsite 5 days/week – Overland Park, KS (local candidates only) Temp-to-perm opportunity Associate Engineering Technician (Virtual Design & Data Solutions – 5174) This opportunity supports distributed infrastructure (grid) projects, with a focus on underground transmission systems. The role involves working with engineering teams to develop and modify technical deliverables for complex utility projects, including plan and profile drawings using industry-standard design tools such as Autodesk Civil 3D and Bentley MicroStation. Under general supervision, the Associate Engineering Technician performs technical tasks requiring intermediate knowledge of civil engineering principles and practices. This position plays a key role in supporting the design and development of underground transmission line projects, with an emphasis on alignments, plan/profile, and section development. Job Summary • Support engineering teams under general supervision, • Perform technical tasks requiring intermediate knowledge of engineering principles and practices, • Utilize digital tools and design software (CAD, BIM, 3D modeling), • Create, update, and maintain technical drawings, documentation, and project deliverables, • Begin providing technical guidance and mentorship to junior team members Key Responsibilities • Maintain current knowledge of applicable standards, systems, document control practices, and departmental procedures, • Apply quality program standards to ensure accurate, compliant deliverables, • Demonstrate strong attention to detail while supporting continuous improvement initiatives, • Utilize design tools and applications to evaluate and improve workflows and processes, • Develop project deliverables based on multiple design inputs, • Perform basic calculations, including material quantity takeoffs and dimensional checks, • Coordinate with cross-functional teams to reduce design conflicts and improve efficiency, • Support internal stakeholders while gaining exposure to external client requirements, • Stay current with emerging technologies and evolving engineering practicesCompany DescriptionSystem One is a leading provider of specialized, highly technical services and solutions to critical infrastructure, technology, life sciences, and government sectors. We partner with large private and public organizations who trust us to execute their complex, mission-critical initiatives through our outsourced services and workforce solutions.System One is a leading provider of specialized, highly technical services and solutions to critical infrastructure, technology, life sciences, and government sectors. We partner with large private and public organizations who trust us to execute their complex, mission-critical initiatives through our outsourced services and workforce solutions.

Job Description Crawford, Murphy & Tilly is seeking a Civil Engineer Project Manager to join our emerging Aviation team in Jacksonville, FL. This is not a remote position. We are a fast-growing firm with 500+ employees across 25 offices in 10 states, serving clients through our four primary business groups: • Aviation, • Surface Transportation, • Water Resources, • Building & Site Services As a Civil Engineer Project Manager, you'll play a key role in supporting the Florida Aviation team while providing the opportunity to experience new challenges in a dynamic environment. Join us and help shape the future of engineering and consulting. Here’s what you’ll do: • Planning, design, and construction of civil & transportation projects focused on Aviation development, • Perform and lead design tasks or projects, including the supervising and directing of junior staff, • Typical projects require preparation of bidding documents (plans & specifications), including horizontal and vertical layout, site development, grading, drainage, pavement design, marking, signage, erosion control, coordination with other disciplines, water & sanitary utilities, quantity takeoffs, cost estimates, and construction scheduling, • Support the client manager in providing service to and developing relationships with existing aviation clients, • Perform project management and coordination of multi-disciplined tasks necessary to implement projects for clients in our aviation group, • Perform, assist, or oversee construction-related tasks, including on-site construction observation and project engineering, • Assist in business development activities, including prospective client outreach, submittal preparation, and community engagement Here is what you’ll need: • Bachelor’s degree in civil engineering, or related field., • 8 years' experience with an emphasis in Aviation transportation., • Transportation, site development, and infrastructure design, • Geometric design, grading, drainage, pavements, utilities, and specifications, • Licensed Professional Engineer (PE). (Florida preferred)., • Proficient knowledge in AutoCAD; Civil 3D, and Microsoft Office., • Strong verbal and written communication skills, • Strong interpersonal and active listening skills, • Strong attention to detail and thoroughness in completing tasks, • Strong organizational skills and ability to manage deadlines and multiple concurrent tasks., • Strong problem-solving and critical thinking skills to identify issues, evaluate options, and implement solutions, • Demonstrated responsiveness, professionalism, and teamwork Ideally, you will also have: • Experience in business development and staff supervision, • Willingness to travel as needed, • Valid driver’s license and acceptable driving record Physical Requirements: • Physical demands vary depending on the specific nature of assigned projects., • Office tasks: physical requirements are minimal and include prolonged periods sitting or standing at a desk and working on a computer Elevating infrastructure, together. Crawford, Murphy & Tilly (CMT) is a civil infrastructure professional services firm working with clients and their communities to shape the future, together. Our mission is to provide superior infrastructure solutions, responsive to clients’ needs and expectations, while fostering growth and development for employees. Our dedicated team of engineers, planners, scientists, and consultants work together with clients and their communities to plan, advance, deliver, and manage civil infrastructure. At CMT, we are looking for individuals who come to us with varied perspectives, backgrounds and worldviews. Benefits at CMT CMT offers a generous benefits program, focused on four pillars: Health & Wellness, Work + Life Balance, Financial Heath & Retirement, and Career Development. To learn more about the CMT benefit programs, review the information on our website, Careers - CMT Infrastructure Professionals. The expected compensation range for this position is $100,000 - $150,000 annually. The final agreed-upon compensation is based on numerous factors, including but not limited to individual education, qualifications, prior work experience, and geographic location. EQUAL OPPORTUNITY EMPLOYMENT (EEO) POLICY Crawford, Murphy & Tilly (CMT) is an Equal Opportunity Employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, as well as other protected groups. ACCOMMODATIONS FOR APPLICANTS Applicants wishing to apply for an open position with CMT who require a reasonable accommodation in order to complete the application process may contact CMT’s Human Resources Department at to request assistance. CMT is an Equal Opportunity Employer. UNSOLICITED APPLICATIONS CMT does not accept unsolicited resumes or applications. Staffing and recruiting agencies, and individuals being represented by an agency, are not authorized to use this site or to submit applications or resumes, and any such submissions will be considered unsolicited. CMT is not responsible for any fees related to unsolicited resumes/applications.

Job Description Cummins | Cederberg is seeking a coastal engineer with minimum 10 years of experience in coastal engineering analyses and design of waterfront, project management and business development. Marine structural engineering experience is a plus. The preferred candidate should be licensed in Florida or have the ability to be licensed within 6 months. The position will be in our Jacksonville office providing excellent opportunities for growth. We provide outstanding benefits and a superb work environment with focus on collaboration, personal growth and interesting projects. This individual will be involved in interesting, complex waterfront projects in Florida and the Caribbean. Cummins | Cederberg is a prominent Florida coastal and marine engineering firm with projects throughout Florida and the Caribbean, serving both private and public clients. Company DescriptionCummins | Cederberg is Florida’s largest coastal and marine engineering firm with projects throughout Florida and the Caribbean, serving both private and public clients. Cummins | Cederberg offers a very generous benefit package paid 100% by company with significant flexibility and proactive work environment for good work/life balance.Cummins | Cederberg is Florida’s largest coastal and marine engineering firm with projects throughout Florida and the Caribbean, serving both private and public clients. Cummins | Cederberg offers a very generous benefit package paid 100% by company with significant flexibility and proactive work environment for good work/life balance.

Bachelor’s degree or higher in Electrical Engineering, Wireless Engineering, Electronics Engineering, or Mechatronics Engineering from an ABET-accredited program. Execute research and development programs related to RF systems and Electronic Countermeasures by applying established engineering prin

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE REQUIRED FOR START: Yes CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. NG- Military Internship Program Description: As one of the largest global security companies in the world, Northrop Grumman is proud to help our nation’s military personnel make the transition to civilian careers. Approximately 1/4th of Northrop Grumman’s 90,000 employees self-identify as veterans, and more than 1,600 are reservists. The Northrop Grumman Military Internship Program (NG-MIP) is an approved SkillBridge Program under Dept. of Defense Instruction 1322.29 .The NG-MIP program is an opportunity for transitioning service members to gain valuable civilian work experience through an individual internship during their last 6 months of service, for up to 180 days. The Northrop Grumman Military internship Program is open to all ranks and experience levels. SkillBridge participants are not eligible for compensation from Northrop Grumman, as they continue to receive military compensation and benefits as active-duty service members. Responsibilities for this internship position are: Northrop Grumman Corporation (NGC) has developed the Northrop Grumman – Military Internship Program (DoD SkillBridge) utilizing the DoDI guidance for SkillBridge. During this program the service member will be on-site at his or her host company performing an individual internship in an entry to mid-level career type role. The service member will be on the job training supporting a work schedule equivalent to 40hrs per week. Outlined below are the Goals, Objectives, and Outcomes for the program. Goals – Provide transitioning service members fellowship-style job skills training during the last portion(s) of their military commitment. This program is specifically designed to offer internships that result in the potential to transition to a full-time opportunity as the conclusion of the training. Interns will serve as a pipeline for high-speed, motivated military candidates into NGC. Objectives - Service Members who complete the Intern program will be highly-trained, capable, future employees that align to the specific needs of the organization and are prepared to meet the NG mission “Defining Possible” on Day 1. This program provides a comprehensive internship experience including professional development, networking with leadership, and training specifically focused on NG leadership principles, company history, customer/stakeholder engagement, product and service overview, and core job responsibilities. Outcome – Offer transitioning service member a rewarding opportunity to join the Northrop Grumman team. DoD SkillBridge Eligibility: * Has served at least 180 days on active duty * Is within 12 months of separation or retirement * Will receive an honorable discharge * Has taken any service TAPS/TGPS * Has attended or participated in an ethics brief within the last 12 months * Received Unit Commander (first O-4/Field Grade commander in chain of command) written authorization and approval to participate in DoD SkillBridge Program prior to start of internship Northrop Grumman Aeronautics Systems is looking to add a Principal OR Senior Principal Payloads Field Service Engineer to our Mayport Field Service Engineer team. This position will be in our Avionics Integration Organization supporting MQ-4C Triton Program. This position reports to the Operations team lead within the Mission Systems Integrated Product Team (MS IPT) and will receive daily tasking and prioritization from their site lead. The selected candidate will be responsible for operations and maintenance support of the MQ-4C Triton sensors and communications systems at a Forward Operating Base (FOB). Duties and Responsibilities include, but are not limited to: • Provide real time support to flight operations and maintenance, addressing any issues related to communications and/or payloads to include MFAS Radar, EO/IR, airborne recorder, and link16 to include fault isolation, remediation, and resolution, • Coordinate work with site leadership and confirming that Maintenance Action Forms (MAFs) are in place for all required work, • Adhere to checklists and procedures to ensure repeated success and providing redlines to procedures when necessary, • Communicate complex technical issues to local support, the Degrader Action Cell (DAC), Main Operation Bases (MOBs), and Responsible Engineers (REs), • Support and lead air crew engagement for proper techniques in solving complex analysis of technical problems that arise during operations, • Assist with trend analysis as needed for Responsible Engineers (REs), • Assist AVO with Main Operating Base comms (voice), networks, and other AVO interfaces, • Attain and employ expertise across all supported sensor and communications systems This position requires 6+ months of training on a Domestic Assignment to San Diego (Rancho Bernardo), CA with some travel to other US locations such as Baltimore, MD and Jacksonville, FL. Final assignment location in Mayport, Florida. Initially, this position will work a 9/80 shift. As the program matures, the shifts may become 12-hour shifts that could include nights, weekends, and/or holidays. The selected candidate will be required to work full-time, on-site at the designated facility. There is no remote work available for this role. Outside of traveling for initial training, this position requires the ability to travel up to 10% of the time. This position can be filled at either the Principal Payloads Field Service Engineer OR Senior Principal Payloads Field Service Engineer, depending upon the qualifications below. #MPR Basic Qualifications for Principal Payloads Field Service Engineer: • Bachelor’s Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline and 5 years of related engineering experience; OR a Master’s degree in a STEM discipline and 3 years of related engineering experience; OR a PhD in a STEM discipline with 1 year of related engineering experience., • Willingness and ability to successfully complete required training in San Diego (Rancho Bernardo), CA with some travel to other US locations such as Baltimore, MD and Jacksonville, FL., • Ability to obtain and maintain DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: CCNA Security, Security+CE, CCNP, and CISSP. This certificate must be obtained within a reasonable amount of time as determined by the company to meet its business needs., • Competence in Linux, troubleshooting, engineering documents, tools, and equipment, • Familiarity with payloads operations and/or comms/networking operations, • Must have a DoD Secret clearance that is in-scope or currently enrolled in Continuous Evaluation (CE), with the ability to obtain a Top-Secret/SCI clearance within a reasonable amount of time to meet business needs, • Ability to obtain and maintain program access (SAP/PAR). Basic Qualifications for Senior Principal Payloads Field Service Engineer: • Bachelor’s Degree in a STEM (Science, Technology, Engineering or Mathematics) discipline and 8 years of related engineering experience; OR a Master’s degree in a STEM discipline and 6 years of related engineering experience; OR a PhD in a STEM discipline with 3 years of related engineering experience., • Willingness and ability to successfully complete required training in San Diego (Rancho Bernardo), CA with some travel to other US locations such as Baltimore, MD and Jacksonville, FL., • Ability to obtain and maintain DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: CCNA Security, Security+CE, CCNP, and CISSP. This certificate must be obtained within a reasonable amount of time as determined by the company to meet its business needs., • Competence in Linux, troubleshooting, engineering documents, tools, and equipment, • Familiarity with payloads operations and/or comms/networking operations, • Must have a DoD Secret clearance that is in-scope or currently enrolled in Continuous Evaluation (CE), with the ability to obtain a Top-Secret/SCI clearance within a reasonable amount of time to meet business needs, • Ability to obtain and maintain program access (SAP/PAR). Preferred Qualifications for both levels: • Active DoD Top Secret clearance (with a background investigation within the past 6 years or enrolled into Continuous Evaluation)., • Active DoD 8140 approved IAT Level II (or higher) compliant certification. Examples include: CCNA Security, Security+CE, CCNP, and CISSP., • Demonstrated understanding of MQ-4C sensors and communications payloads, • Experience with test equipment: network analyzers, spectrum analyzers, signal generators, • MPO/TC operator system knowledge, • System Administrator experience, • Operations and Maintenance experience at a field site Primary Level Salary Range: $78,700.00 - $118,100.00 Secondary Level Salary Range: $98,100.00 - $147,100.00 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit . U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

Description The NMCI Service Management Integration and Transport (SMIT) group at Leidos has an opening for a Site Reliability Engineer to focus on the reliability, performance, and scalability of complex distributed systems. Under the SMIT Contract, the Leidos team is responsible for the core backbone for the Navy-Marine Corps Intranet, including cybersecurity services, network operations, network engineering, service desk, seat support services, and data transport. The SRE will also develop and execute tests focused on system resilience, performance under load, and failure scenarios. They will work in tandem with other Site Reliability Engineers (SREs) and development teams to create automated testing frameworks that simulate real-world conditions that validate system behavior under normal and stress conditions, ensuring our services are resilient and meet established service level objectives (SLOs). Your work will contribute to the development of robust and scalable services that operate reliably in production. Your responsibilities will include maintaining complex computer systems by writing code to automate software releases, monitor systems, and detect and fix problems before users even know there is an issue. You will use these skills to improve site performance and overall reliability. The SRE Engineer role is responsible for supporting, migrating, automation and optimization of software development and deployment process, infrastructure as code, and contribute to the overall maturity of the Site Reliability Engineering program. Primary Responsibilities • Work alongside the development and operations teams to ensure speedy and reliable software deployments, monitor systems, and improve overall reliability of the platform. In addition, as you discover and document system bugs, you have the motivation to go off and fix them yourself., • Develop features utilize the AI coding tool and repository of scripts to automate, scale, test, and secure the cloud infrastructure and the pipelines., • Enhance performance monitoring of the various systems via Splunk or other dashboard reporting tools., • Identify performance bottlenecks and optimize the performance of cloud infrastructure., • Contribute to continuing our SRE journey by suggesting ways to improve engineering build, maintenance, automation and reliability across the platform with SRE/DevOps tools and Infrastructure-as-Code., • Develop and code high-quality pipeline automation workflows to support inside and outside the cloud platform that are appropriate for business and technology strategies., • Develop and execute test strategies that simulate real-world failure scenarios, including network disruptions, hardware failures, and system overloads., • Create, script, and run performance tests to measure system behavior under varying levels of load and traffic. Identify bottlenecks, performance degradation, and areas for optimization., • Design, implement, and maintain automated test suites for infrastructure and application components. Ensure that testing is integrated into the CI/CD pipeline to validate system reliability with every release., • Build automated systems for continuous performance testing, stress testing, and load testing., • Work closely with SREs, developers, and operations teams to define reliability goals and develop appropriate testing strategies to validate those goals., • Ensure that new services and features undergo thorough testing for performance, reliability, and failure recovery before deployment to production., • Validate that monitoring, logging, and alerting mechanisms are functioning correctly by testing systems under failure conditions., • Ensure that Service Level Indicators (SLIs) and Service Level Objectives (SLOs) are accurately measured and tracked through automated testing frameworks., • Resolve most conflicts between timeline, budget, and scope independently but intuitively raise sophisticated or consequential issues to senior management. Basic Qualifications • Typically requires Bachelor’s however 4 – 8 years of prior relevant experience may be considered in lieu of degree., • Must have an active DoD Secret security clearance and be able to maintain., • Minimum of DoD 8570.01 IAT Level II Certification required prior to onboarding and must maintain certification while supporting the SMIT Contract., • Must be able to support program execution in classified environments and access SIPRNet from an NMCI location on short notice (local travel.), • 5+ years’ experience configuring Cisco routers, switches, and network appliances., • 5+ years’ experience with routing protocols (i.e., OSPF/EIGRP/BGP.), • 5+ years’ experience with L2 switching, (i.e., Vlans, spanning tree, VTP etc.), • 5+ years’ experience troubleshooting complex routing and switching issues., • Experience with multiple vendor routing, switching or wireless product lines., • Strong understanding and in-depth knowledge of TCP/IP network/subnet addressing., • Supports network configuration/asset management activities, manages configuration drift, and accurately creates or modifies network documentation to reflect the as-is and/or to-be environment., • Ability to work independently or in a team environment to resolve technical issues in a dynamic environment., • Experience with automated script design, coding, debugging, and maintenance skills (using bash, python, etc.) preferred., • Experience in CI/CD toolsets (e.g. Jenkins, GitLab, etc.), • Experience with Containerization (Docker) and Container Orchestration (Kubernetes.), • Good command of Linux/Unix and command line knowledge., • Experience in application administration, configuration, and integration., • Familiarity with agile development methodologies., • Skilled and disciplined to work with a distributed team., • Ability to work in a highly collaborative, forward thinking, and innovation-driven environment., • Knowledge of Agile and DevSecOps/SRE concepts and best practices, with a desire to grow that knowledge., • Hand-on experience with Atlassian products (Jira, Confluence, Bitbucket, etc.), • Experience creating JIRA and/or Azure DevOps workflows, projects, custom configurations., • Experience administrating/maintaining SRE platform via Ansible playbooks (e.g. upgrading Jenkins.), • Experience in automating tasks with scripting languages like PowerShell, or Python., • Integrating/maintaining with various 3rd party CI/CD tools like Jenkins and Gitlab., • Experience with PaaS using Red Hat OpenShift/Kubernetes and Docker containers., • Experience with commercial cloud infrastructure deployment environments such as AWS and Azure., • Experience with automated provisioning and configuration tools like Terraform, Cloud Formation, Chef, Puppet, Ansible, or similar technologies., • Working knowledge of the Risk Management Framework (RMF), DISA STIGs. Preferred Qualifications: • Previous work experience providing support to the NGEN-NMCI program., • Experience with Infrastructure as Code (IaC) tools such as Terraform, Ansible, or CloudFormation for automating test environments. AppMod If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. March 10, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $87,100.00 - $157,450.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws.

Familiarity with Microsoft Office, email clients, and remote support tools. Ensure compliance with IT policies and standards. Required Skills: Experience in Desktop/IT Support.

Navy’s Service Management, Integration, and Transport (SMIT) program has an opening for a Site Reliability Automation and Orchestration Engineer on a high-visibility DoD program that provides engineering support to the Navy Marine Corps Intranet (NMCI), the largest information technology (IT) netw

Job Description: Mechatronics Engineer – Cell Therapy Processing We are seeking a hands‑on, technically strong engineer to lead vendor‑led development of cell therapy processing equipment for GMP manufacturing. This role serves as the primary technical owner and interface between internal cross‑functional teams and external equipment suppliers to deliver robust, compliant, and scalable solutions. The successful candidate will translate process needs into clear requirements, guide design decisions, manage technical risk, and drive execution through design, build, FAT/SAT, qualification, and handoff to operations. A strong focus on documentation quality, data integrity, and inspection readiness is essential. Key responsibilities include: · Technical ownership of vendor‑led equipment development, including scope alignment, interfaces, and acceptance criteria · Leadership of design reviews, technical governance, issue resolution, and change control · Authoring and owning URS/FRS inputs with full traceability to verification and validation · Oversight of FAT/SAT, commissioning, and qualification readiness in partnership with Quality and CQV · Ensuring GMP compliance, data integrity, and controlled documentation across vendor deliverables · Driving cross‑functional alignment and proactive risk management Qualifications/Skills: · Bachelor’s degree in engineering (Mechanical, Electrical, Automation, Mechatronics, or related) · 10+ years delivering complex equipment in regulated manufacturing environments · Proven experience managing external vendors or system integrators · Strong understanding of GMP, design control, and equipment qualification · Demonstrate experience working with bespoke, non-standard automation equipment, ideally in medical device and/or pharma environment. · Strong focus on teamwork, collaboration, and co-ordination · Confident with decision-making, leadership, and delegation · Driven to deliver, execute and get work done · Well structured, logical, and clear with communications · Structured with planning and organization · Flexible, adaptable, and comfortable managing with uncertainty Preferred Experience: · Cell therapy processing · automation/controls integration and robotics · startup/stabilization support · Working for 3rd party automation, CDMO, equipment or technology vendors in a design/automation industries · Design for Manufacture and Design for automation DFM/DFA experience highly desirable

In-depth understanding of the services Marine Corps Prepositioning Program provides to the customer and the processes and techniques used to deliver these services. The MCPP-PHIL Engineering Process Control Analyst will report directly to the MCPP-PHIL Quality Supervisor. Monitor the activities of a

Working knowledge of software validation requirements for software used in the production of medical devices and software used to support the Quality System. Subject to the terms of their respective policies and date of hire, employees are eligible for the following time off benefits:. Through our e

We are currently recruiting for Principal ML Ops Engineer based in Jacksonville FL, Raritan NJ, Spring House PA or any other J&J East Coast and Central US locations. We are seeking an experienced ML Ops Engineer to oversee and enhance our machine learning operations and AI platform ecosystem. The Pr

Requirements: Bachelor’s degree in civil engineering, mechanical engineering, or related field. Active involvement in professional organizations related to water/wastewater engineering. This is your chance to join our team - help us to design the water/wastewater projects that improve the world! W

Job Description Crawford, Murphy & Tilly is seeking a Sr. Transportation Engineer to join the Jacksonville, FL Surface Transportation team. This is not a remote position. We are a fast-growing firm with 500+ employees across 25 offices in 10 states, serving clients through our four primary business groups: • Aviation, • Surface Transportation, • Water Resources, • Building & Site Services As a Sr. Transportation Engineer, you'll play a key role in supporting the Jacksonville, FL team while providing the opportunity to experience new challenges in a dynamic environment. Join us and help shape the future of engineering and consulting. Here’s what you’ll do: • Planning, design, and project management of moderate to complex transportation projects on primarily FDOT-focused projects, • Collaborate effectively with multi-disciplinary teams to ensure successful project delivery, • Provide leadership in staff development and growth in our Jacksonville, FL operations, • Drive project development and pursue surface transportation-related work, • Engage clients, agencies and other professionals within the transportation engineering industry Here is what you’ll need: • Bachelor’s degree in civil engineering, or related field, • 5 - 10 years' experience with an emphasis in roadway/highway geometric design, • Registered Professional Engineer in Florida, or the ability to gain licensure in the state, • Strong preference will be given to those with not only a technical understanding of delivering highway engineering projects but those that possess a complete understanding of delivering a quality and comprehensive product, program, or solution for our surface transportation clients, • Proficient knowledge in OpenRoads, AutoCAD, Civil3D software packages, • Strong technical, written, and oral communication skills, • Strong interpersonal and active listening skills, • Strong attention to detail and thoroughness in completing tasks, • Ability to work and lead in a team environment while mentoring staff, • Ability to manage multiple assignments on a variety of projects, work in an environment to learn quickly, take initiative and interact with a variety of people located in Florida and other CMT offices, • Strong problem-solving and critical thinking skills to identify issues, evaluate options, and implement solutions, • Demonstrated responsiveness, professionalism, and teamwork Ideally, you will also have: • Geometric design, drainage, transportation planning, traffic engineering/corridor studies, project management with FDOT is desired, • Experience in business development and staff supervision, • Willingness to travel as needed, • Valid driver’s license and acceptable driving record Physical Requirements: • Physical demands vary depending on the specific nature of assigned projects., • Office tasks: physical requirements are minimal and include prolonged periods sitting or standing at a desk and working on a computer Elevating infrastructure, together. Crawford, Murphy & Tilly (CMT) is a civil infrastructure professional services firm working with clients and their communities to shape the future, together. Our mission is to provide superior infrastructure solutions, responsive to clients’ needs and expectations, while fostering growth and development for employees. Our dedicated team of engineers, planners, scientists, and consultants work together with clients and their communities to plan, advance, deliver, and manage civil infrastructure. At CMT, we are looking for individuals who come to us with varied perspectives, backgrounds and worldviews. Benefits at CMT CMT offers a generous benefits program, focused on four pillars: Health & Wellness, Work + Life Balance, Financial Heath & Retirement, and Career Development. To learn more about the CMT benefit programs, review the information on our website, Careers - CMT Infrastructure Professionals. The expected compensation range for this position is $85,000 - $125,000 annually. The final agreed-upon compensation is based on numerous factors, including but not limited to individual education, qualifications, prior work experience, and geographic location. EQUAL OPPORTUNITY EMPLOYMENT (EEO) POLICY Crawford, Murphy & Tilly (CMT) is an Equal Opportunity Employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, as well as other protected groups. ACCOMMODATIONS FOR APPLICANTS Applicants wishing to apply for an open position with CMT who require a reasonable accommodation in order to complete the application process may contact CMT’s Human Resources Department at to request assistance. CMT is an Equal Opportunity Employer. UNSOLICITED APPLICATIONS CMT does not accept unsolicited resumes or applications. Staffing and recruiting agencies, and individuals being represented by an agency, are not authorized to use this site or to submit applications or resumes, and any such submissions will be considered unsolicited. CMT is not responsible for any fees related to unsolicited resumes/applications.

Job Description At Whitman, Requardt & Associates, LLP, we are "People Focused and Project Driven". We have been in business for 110 years and we are known for our quality work and quality employees. This is your chance to join our dynamic team and help us to design the critical infrastructure that improves our world! We are looking for an experienced Transportation - Highway Engineer to join our team in our Jacksonville, FL office. We are a rapidly growing company with a strong industry reputation and an expanding presence in the Florida market. Our highway contracts range from small-scale intersection improvements to complex interchanges and new corridor designs to statewide and districtwide continuing services contracts. We also provide a full range of design-build and owner’s representative services. Responsibilities: As a Highway Engineer, you’ll play a key role in the planning and design of transportation infrastructure. Your responsibilities will include: • Developing roadway designs and producing construction plans for FDOT and local agency projects, • Designing horizontal and vertical alignments, roadside features, and maintenance of traffic (MOT) plans, • Coordinating utilities, preparing specifications, cost estimates, and technical reports, • Supporting design-build and alternative delivery projects, including P3 initiatives, • 5–10 years of experience in highway/roadway design, • Bachelor’s degree in Civil Engineering, • Professional Engineer (P.E.) license in Florida, or ability to obtain within 6 months, • Strong knowledge of FDOT standards, specifications, and procedures, • Proficiency in MicroStation, Geopak, InRoads, OpenRoads, and/or AutoCAD, • Experience with 3D design and alternative delivery methods (Design-Build, P3) is a plus, • Excellent written and verbal communication skills, • A collaborative mindset and a desire to grow professionally, • Willingness to travel to project sites, client meetings, and other WRA offices as neededWhy Join WRA?, • Be part of a growing Florida team with access to exciting, high-impact projects, • Work in a supportive, people-first culture that values your contributions, • Access to cutting-edge tools and technologies WRA recognizes that employees play an important role in its success. Our commitment to full-time employees is reflected in the comprehensive benefits package we offer: • Flexible work schedule options, • Competitive salary, • Leave accrual and paid holidays, • Healthcare benefits, • Group Life Insurance, as well as additional optional life Insurance, short and long term disability insurance, • Flexible spending accounts for medical and dependent care reimbursement, • 401(k) Retirement Plan, • Tuition Reimbursement, • Employee Assistance Program Applicants must be currently authorized to work in the United States on a full-time basis without the need for employment-based visa sponsorship now or in the future. WRA will not sponsor applicants for U.S. work visa status for this opportunity. (no sponsorship is available for H-1B, L-1, TN, O-1, E-3, H-1B1, F-1, J-1, OPT, CPT or any other employment-based visa) * Not accepting resumes from 3rd party recruiters for this position * Position # 2812 #LI - Onsite #LI - Mid Level

Job DescriptionDesign Engineer I Job Description Design Engineer I is a technical staff position for individuals that typically possess between zero and three years of experience within a consulting structural engineering firm or similar. This is primarily a task-oriented position. Tasks are administered individually by a Supervisor, typically by Project Managers and occasionally by Project Engineers. Tasks are reviewed by a Supervisor while the task is both in-progress and complete. A Design Engineer’s performance is judged primarily on the accuracy and consistency of results as well as the level of independence with which those results were achieved. Duties and Responsibilities • Tasks, • Generation of 3-D Building Information Models (BIM) and 3-D Structural Analysis and Design Models utilizing advanced software programs, • Computer-aided and hand-calculated structural analysis, design, and detailing of steel, concrete, masonry, and timber systems, • Introductory structural design coordination with other design professionals including Architects and Engineers of various disciplines, • Introductory preparation of Construction Documents within the Autodesk REVIT environment, • Review of structural submittals and basic RFI’s, • Construction Observation and Special Inspections on Jezerinac Group and other projects, • Deliverables, • Production of complete and accurately modeled BIM and structural analysis and design models, • Production of accurate and orderly-kept calculations, • Production of accurately extracted structural plans and details per JG drawing presentation standards for review supervisor., • Production of Field Observation, Inspection, and Investigative Reports per JG reporting standards for review by supervisor., • Project Management, • Regularly discuss allotted time per task with Project ManagerKnowledge Required, • Technical, • Model Building Codes, i.e., FBC and IBC, • Design Standards, i.e., ASCE-7, • Material Codes and Design Standards, i.e., ACI-318 and AISC Manuals of Steel Construction, • JG design, BIM modeling, and drawing presentation standards, where applicable, • Software user manuals, i.e., Autodesk REVIT, RAM SS, RAM Concept, Enercalc, • Understanding of statics, mechanics of materials, and traditional and matrix structural analysis – exercise general critical thinking skills consistent with such understanding, • Understanding of steel, concrete, masonry, and timber design methodology, • Field observation and inspection techniquesWork Quality, • Produces logical and accurate results backed by organized and clearly presented structural calculations that are easy for supervisors to understand, • Follows JG design, BIM modeling, and drawing presentation standards, where applicable, • Uses proper grammar within written and verbal communication, • Production of neat, accurate, and graphically pleasing documentation including reports, • Schedules timely in-house task/project quality reviews of his/her work and follows through on review commentsTime Management / Efficiency / Self-Motivation, • Sets goals throughout day for the completion of individual tasks, • Seeks collaboration with supervisor in determination of allotted time per task and produces work in allotted time period, • Works to simplify analysis, design, and drawing presentation, • Completes tasks on time and only once. Spends little time correcting design errors or incomplete or erroneous documents, • Logs time accurately on a daily basis per Project Manager’s contractual agreements, • Voluntarily seeks job knowledge outside of office hours including reading of textbooks, codes, material specifications, software manuals, and industry trade publications. Communication and Teamwork, • Speaks clearly and efficiently to colleagues, supervisors, clients, and other industry professionals using accurate technical terminology, • Writes grammatically correct, efficient, and technically accurate reports, emails, or other inquiries, • Works collaboratively with others, openly and thoroughly sharing information with othersLeadership and Culture, • Reaches out to instruct others when their technical acumen on a subject is greater than his/her colleague’s, • Displays an enthusiastic and positive attitude, treats co-workers with respect, works to resolve disputes - not promote them, and arouses enthusiasm in others and promotes their development, • Is an internal champion of JG by setting positive examples for other employees; and, • Provides management with constructive suggestions on ways to make JG a better company and a better place to workFirm Promotion, • Conducts his or herself in a professional manner with all industry contacts, • Provides helpful consultation and recommendations to project team members, • Communicates accurately through verbal, electronic, and written channels, • Always Promotes JG and their services, • Responds to client and project concerns and needs in a professional and timely manner, • Seeks and presents additional opportunities for JG through current and past industry contacts

Job DescriptionTECHNICAL SOLUTIONS ARCHITECT (REMOTE US BASED) ARC Group has an immediate opportunity for a Technical Solutions Architect for a US-based remote position to help with the technical implementation of Ivalua, ensuring successful integration with existing systems, including ERP, 3rd Party Risk Management, and catalog systems. W2 Contract Only No 1099/No C2C 100% REMOTE! Reference # 16889-1 Candidates must have permanent work authorization and work for any employer without sponsorship now or in the future. Third party candidates are not eligible for this role. Job Description • Lead the technical implementation of Ivalua, ensuring successful integration with existing systems, including ERP, 3rd Party Risk Management, and catalog systems., • Collaborate with business stakeholders to gather requirements, design, and develop solutions that meet business needs., • Collaborate with PM to develop and execute a detailed project plan, including timelines, milestones, and resource allocation., • Manage a team of IT professionals, including developers, analysts, and testers, to ensure successful project delivery., • Ensure data migration, data quality, and data governance are properly addressed during the implementation., • Develop and maintain technical documentation, including system design, architecture, and configuration., • Collaborate with the Ivalua vendor team to ensure successful implementation, including coordination of vendor resources, and resolution of technical issues., • Develop and execute testing plans, including unit testing, integration testing, and user acceptance testing (UAT)., • Ensure compliance with enterprise IT standards, security policies, and regulatory requirements., • Provide technical support and training to end-users, including procurement teams, and other stakeholders., • Develop and manage project budgets, resource allocation, and vendor contracts., • Bachelor's degree in Computer Science, Information Technology, or a related field., • At least 8 years of experience in IT, with a minimum of 5 years in a leadership role, leading large-scale IT projects., • Proven experience with implementing cloud-based procurement or spend management systems, preferably Ivalua., • Strong technical knowledge of ERP systems (Peoplesoft, Oracle, and SAP), 3rd Party Risk Management systems (Archer), and catalog systems., • Excellent project management skills, with experience in Agile methodologies and IT service management frameworks (e.g., ITIL)., • Strong leadership and team management skills, with experience in managing cross-functional teams., • Excellent communication and interpersonal skills, with ability to communicate technical information to non-technical stakeholders., • Strong analytical and problem-solving skills, with ability to troubleshoot complex technical issues., • Experience with data migration, data quality, and data governance., • Experience in analytics, including data visualization, reporting, and business intelligence, using Microsoft tools such as Power BI, SSRS, and SSAS., • Experience with Ivalua implementation and configuration., • Knowledge of procurement processes and spend management best practices., • Experience with DevOps practices and tools (e.g., Jenkins, Docker)., • Certification in cloud security (e.g., CCSK) or compliance (e.g., CISA). Required Education: Related Bachelor's degree in an IT related field or relevant work experience Would you like to know more about our new opportunity? For immediate consideration, please apply online and view all our open positions at . ARC Group is a Forbes-ranked a top 20 recruiting and executive search firm working with clients nationwide to recruit the highest quality technical resources. We have achieved this by understanding both our candidate's and client's needs and goals and serving both with integrity and a shared desire to succeed. ARC Group is proud to be an equal opportunity workplace dedicated to pursuing and hiring a diverse workforce. Position offered by No Fee agency.

Job DescriptionHazen and Sawyer is seeking a Water/Wastewater Engineer for our Jacksonville office. As part of our design and process teams, you will be involved with a wide range of wastewater infrastructure projects. This will encompass all phases of design, including conceptual/feasibility evaluations, project management, preparation of design reports, permitting, development of construction drawings and specifications, and support of construction services. Why Hazen and Sawyer: • Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water.", • Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater, and stormwater management., • We foster a work environment low on bureaucracy and high in creativity., • We recruit talented professionals, provide them with challenging, interesting, and creative assignments, and furnish them with the tools they need to succeed., • We currently have over 2,000 employees in 70+ offices throughout the United States, Latin America, Canada, and the UK., • Support the development of technical treatment strategies, selection of treatment processes, developing process design criteria, and delivering projects, • Support coordination and collaboration with clients, • Coordination with internal technical specialists in all practice areas and discipline design professionals for project delivery., • Support planning, design, permitting, and construction of water/wastewater-related projects., • Experience working with interdisciplinary teams to effectively meet the client’s needs, • Candidate shall also be able to support preparation of proposals and presentations, • Bachelor's degree in Civil or Environmental Engineering, • PE license in Florida (or ability to obtain within first year), • 5-12 years of experience in the field of wastewater-related infrastructure, including project engineering/management (planning, design, and construction), • Experience in successfully delivering supporting projects spanning multiple years in collaborative, multi-disciplinary teams, • Proficient in all MS Office based computer software, • Excellent communication and interpersonal skills, and capable of interacting effectively with staff, clients, and regulatory agencies, • Self-starter with attention to detail, • Strong organizational skills, • Must be capable of presenting complex issues to nontechnical people, • Comprehensive health benefits (medical, dental, vision, and prescription plans), • Pre-tax flexible spending plans for medical, dependent care, and transportation, • Short and long-term disability, and employer paid life insurance, • Paid holidays, floating holidays, and paid time off (PTO), • Employer-contributed 401(k) plan and additional financial planning support, • Professional growth opportunities, including tuition reimbursement, in-house training, and incentives for professional registration and professional organization memberships, • Starting pay range for this position depends on skills, experience, education and geographical location

Job Description Nymbus () isn't just a leader in fintech; we're a community of innovators passionate about reimagining banking. Our award-winning modern core platform and cloud-based technology serve as the backbone for financial institutions eager to modernize and excel. Here, you won't just be part of a tech revolution; you'll be at the helm, driving change. You'll fit right in if you're a creative thinker eager to lessen technical debt and elevate agility for banks and credit unions. Our culture thrives on collaboration, integrity, and a client-first approach. We operate with an AI-first mindset across all aspects of our business, continuously improving our efficiency and increasing the value we deliver to clients. We're looking for individuals who are intensely curious about emerging technologies and passionate about innovation. Your journey with us won't simply advance your career; it will offer the chance to shape an industry alongside like-minded professionals. We're excited to consider you a key player in this transformative chapter. Thank you for contemplating a role with Nymbus. WORK ENVIRONMENT: We are a remote first company with the exception of a few positions being onsite in our designated locations. The positions which are remote you will need to be able to travel a few times a year. You may be required at times to visit client sites or attend meetings at designated locations with your team members. Nymbus helps banks and global financial services organizations transform their capabilities and drive value in today's digital marketplace. At Nymbus, we believe when you set off on the path to innovation you should feel excitement and confidence, not fear and dread. With Nymbus we are bringing delight back into the banking process. We want our partners to be thrilled about the possibilities we are creating together and the lasting impact our collaboration will bring to the industry and consumers. The journey to growth begins with doing something different. And that journey starts with the great people that make Nymbus. Thank you for considering and entrusting Nymbus to be the catalyst that helps take your career through your next chapter. POSITION SUMMARY: As a Senior Engineer at Nymbus you will leverage your deep technical abilities to plan and deliver functionality start to finish, using an AI-first approach, while also contributing to the architectural vision of our products. Additionally you will build up the team's abilities by mentoring other software engineers to improve code quality, leverage AI for development and also working with them to organize their work. We use Kiro (kiro.dev) as our standard AI-powered IDE, leveraging the latest Claude models from Anthropic to support design, development, and testing. In this role, engineers are expected to take an AI-first approach to their work and have experience crafting effective prompts, iterating with AI on design and specifications, managing context files, integrating with MCP servers, and reviewing AI-generated code and selected libraries. ESSENTIAL JOB FUNCTIONS/RESPONSIBILITIES: • Develop highly complex and integrated enterprise applications that meet the highest security and legal compliance standards. This includes all non-functional requirements such as scalability, resilience, configurability, and upgradeability., • Embrace an AI-first approach to engineering and demonstrate ownership of learning and leveraging new technologies throughout our service delivery lifecycle., • Be a resource for your team for architectural and code related questions and decisions., • Create and review software architecture designs and architectural standards including visual representations., • Identify and drive potential areas of improvement for your team and applications., • Work with other teams to align project plans and deliverables that span multiple teams with the goal of ensuring the highest quality deliverable., • Define the usage of 3rd party libraries and drive the adoption of shared code across teams., • Support developers in translating business requirements into technical specifications and provide effort estimates, • Drive fast root cause analysis of mission-critical issues with time constraints and provide rapid mitigations. QUALIFICATIONS: • Bachelor's Degree in computer science or a related field, or equivalent practical experience., • Experience as a full stack developer using Java 11 or newer, Java frameworks (Spring Boot, Spring MVC, etc), and Javascript (Angular or React experience preferred), • Experience in developing large, complex enterprise applications., • Familiarity with relational databases (e.g., MySQL, PostgreSQL) and proficiency in writing SQL., • In-depth knowledge of RESTful API design principles, Swagger/OpenAPI specifications, and handling of data formats like JSON/XML., • Knowledge of CI/CD pipelines (GitLab CI, Jenkins, etc.) and version control (Git)., • Familiarity with automated testing frameworks (JUnit, Mockito)., • Proven expertise in caching strategies and in-memory data stores (especially Redis) to improve latency, scalability, and fault tolerance., • Experience working with messaging systems such as Kafka Streams, • Ability to communicate complex technical concepts clearly to diverse audiences., • Experience with AI-assisted development, including using AI to create design specifications and implementation plans prior to code generation. NICE TO HAVE: • Experience in financial technology, banking, or payment systems., • Exposure to observability tools like Grafana, Logz.io, Splunk., • Familiarity with AWS services., • Experience implementing scalable caching architectures. INTERVIEW PROCESS: • Candidates will typically progress through up to four interviews, each lasting 30 to 60 minutes, with various members of our team., • One technical interview will require a demonstration of development using your preferred IDE. It will focus on how you've incorporated AI into your development activities, including the services you've used, the features you like and dislike, and how AI has supported your debugging, feature design, code review, and code generation. SALARY & BENEFITS: • $100,000 - $120,000 Annual Salary, • Annual Cash Bonus and Equity Options commensurate with the role level and experience, • 100% Remote, • 401(k) plan, • Insurance - Health, Dental and Vision Let's Go!

Job Description We are seeking a hands-on ServiceNow Claims Lead Engineer to serve as the technical subject matter expert (SME) for a highly customized specialty claims platform built on ServiceNow. This role is focused on architecture, design, and hands-on development, working closely with engineering leadership, product stakeholders, and a Software Integrator (SI) to deliver scalable, high-quality solutions. The platform leverages ServiceNow Customer Service Management (CSM), App Engine, and Integration Hub with extensive scripted customizations and complex integrations across policy administration, financial systems, and enterprise data platforms. This role is ideal for someone who enjoys building and evolving complex platforms, staying close to the code, and acting as the go-to technical authority for ServiceNow architecture and implementation. Key Responsibilities: Platform Architecture & Technical Ownership • Serve as the ServiceNow technical authority (SME) for the claims platform., • Design and evolve claims data models, workflows, case structures, and automation to support complex business processes., • Architect solutions using CSM and App Engine to enable highly customized, non–out-of-the-box functionality., • Define and maintain technical standards, patterns, and best practices for the platform., • Actively contribute to development, including ServiceNow scripting (JavaScript, Script Includes, Business Rules, UI logic)., • Build prototypes, reference implementations, and reusable components., • Review and guide implementation work delivered by internal engineers and the SI., • Lead technical design sessions and provide clear direction on solution approaches., • Design and implement integrations using ServiceNow Integration Hub, including custom actions and orchestration., • Build and support both:, • Real-time transactional integrations, • Batch-based data pipelines, • Integrate with:, • Policy administration systems, • Financial and accounting platforms, • Enterprise data warehouse / analytics systems, • Apply strong understanding of:, • Synchronous vs. asynchronous processing, • Contribute to and help enforce SDLC practices, including design standards, code quality, and release processes., • Support platform stability through involvement in production support, troubleshooting, and root cause analysis., • Ensure solutions are built with operational readiness, observability, and performance in mind., • Partner closely with engineering leadership, product teams, and the SI to translate business needs into technical solutions., • Act as a trusted technical advisor across engineering and business stakeholders. Required Qualifications • 8+ years of software engineering experience with strong hands-on ServiceNow development., • Deep experience with:, • ServiceNow CSM, • App Engine (custom applications), • Integration Hub (custom actions and orchestration), • Proven experience working in heavily customized ServiceNow environments with significant scripted logic., • Strong experience designing and implementing enterprise integrations and data pipelines., • Solid understanding of:, • Event-driven architecture, • Sync vs. async integration patterns, • Distributed data consistency, • Ability to contribute directly to code and guide implementation teams., • Strong communication skills and ability to influence technical decisions. Preferred Qualifications • Experience building or supporting financial or insurance domains, • ServiceNow certifications (CSA, CAD, CIS-CSM) preferred but not required., • Experience operating in regulated or compliance-driven environments. The anticipated salary for this position is $120,000 - $180,000 per year, based on qualifications and experience. Recruitment Updates Fortegra has recently been made aware of unauthorized communications regarding career opportunities by individuals not associated with Fortegra or our recruitment team. Fortegra will only contact you from the Fortegra domain address (@fortegra.com). If you receive a message from someone posing as a Fortegra recruiter via text message, WhatsApp, Telegram or other messaging platform, please report it as phishing and block the sender. Fortegra is not accepting unsolicited resumes from search firms for this position. #LI-Onsite

Job DescriptionSalary: Recently named as one of Northeast Florida's Top Places to Work, Alliant Engineering, an employee-owned company, is a growing engineering, planning, landscape architecture, and surveying firm with a strong culture of quality, delivery, and innovation. Our employee owners are driven by a commitment to build better communities with excellence and passion. At Alliant we work hard; we have fun; and we love it. Within our Minnesota and Florida offices, we blend collaboration with integrity and forward-thinking to develop design solutions that address current needs and future aspirations. Internally, we strive to provide a diverse and equitable culture of support and opportunities. Then, it extends outwardly by giving back to charitable organizations in our communities. Alliant Engineering seeks straightforward people who value smart solutions, intelligent discussion, and a collaborative approach to achieving great things. Always humbly confident, we believe in creating work that speaks for itself. About the Role: Alliant Engineering has an opening for aSurvey Office CAD Technician. This position will support Professional Land Surveyors or the survey department during the preparation of typical survey projects such as boundary surveys, existing conditions surveys, subdivision plats, common interest community plats, registered land surveys and survey exhibits. Responsibilities: • Provides non-technical routine and basic support for assigned projects, using a computer as an aid to drafting at the entry-level, • Completes detailed drawings from sketches, plans, specification, and written and verbal instructions using computer-aided drafting programs., • Reviews all work for completeness and accuracy prior to submitting to Project Surveyor or Project Manager for review., • Revises or changes drawings, traces and/or copies existing drawings and completes simple calculations with specific instructions., • Relies on instructions and pre-established guidelines to perform the functions of the job; requires some supervision, however, can work independently, • Maintains neat and orderly work area, which allows access to project information to other team members. Qualifications: • Two-year technical education in survey technology, or equivalent CAD drafting experience., • Must have platting experience, 2 or more years preferred., • Knowledge in Autodesk Civil 3D or higher, • Experience with MicroStation is preferred but not required., • Must be proficient with Basic Computer Skills (Microsoft Office, etc.) Benefits: At Alliant, we take care of our employees by offering a world class benefit package including: • Competitive Salary with Bonus Opportunities, • Market-Leading Profit Sharing, ESOP and 401k Contribution Programs, • Medical (with HSA Contribution), Dental, and Vision Plans, • Company Paid Life Insurance, Short-Term Disability and Long-Term Disability, • Flexible Spending Accounts for Medical and Dependent Care, • Wellness Programs and Competitions, • Generous Annual Leave and Compensatory Time Off Programs, • Flexible Schedules, • Casual Work Environment, • Paid Professional Development and Training, • Community Involvement/Charity Events, • Numerous Employee Focused Events (Lunch & Learns, Office Recreation Room, Off-Site Socials, Etc.) The Alliant team is a group of enthusiastic, self-motivated professionals that live the mission of building better communities with excellence and passion. Come and be an employee-owner in an organization that offers an inclusive workplace culture that is uplifting and positive along with an outstanding salary and benefits package.

Job DescriptionA Structural Engineer plays a pivotal role in the design of buildings and infrastructure responsible for analyzing, and ensuring the structural integrity and documenting the scope of work .They collaborate with architects, contractors, and other engineers to create safe, functional, and aesthetically pleasing structures. Duties/Responsibilities: • Develop detailed plans and specifications for structures, ensuring they meet project criteria and scope, safety standards and regulatory requirements., • Perform complex calculations, oversee drawing development and prepare specifications for assigned projects., • Ensure compliance with codes, standards and regulations., • Coordinate with architects, engineers, contractors, and other stakeholders to ensure project objectives are achieved, • Conduct site inspections and assess existing structures for potential problems or necessary renovations., • Work closely with architects, civil engineers, and construction managers to integrate structural solutions into the overall project design., • Prepare comprehensive reports and documentation, review and approve submittals, and participate in owner and project meetings., • Other duties as assignedRequired Skills/Abilities:, • Exceptional problem-solving and critical-thinking abilities., • Effective communication and teamwork skills., • Detail-oriented with a strong focus on accuracy and safety., • Ability to adapt to changing project requirements and timelines. Education/Experience:, • Bachelor of science degree in Civil Engineering, Structural Engineering or Architectural Engineering. a master’s degree is preferred., • Professional Engineer (PE) licensure or ability to obtain., • Strong proficiency in structural analysis software (e.g. RAM, FEM, Enercalc, Revit, or similiar)., • 5+ years of experience in structural engineering., • Experience with a variety of structural materials steel, concrete, masonry and precast concrete., • Proven track record of managing multiple projects simultaneously. Travel Requirements:, • Flexibility to travel on short notice for urgent business needs, to attend meetings, trainings, and events., • Maintain a professional demeanor and appearance during business trips., • Compliance with company travel policies and procedures. Physical Requirements:, • Ability to sit, stand, and walk for long periods of time., • Ability to use a computer, phone, printer, scanner, and other office equipment., • Visual acuity for detailed work and computer use, • Ability to lift, carry, and move up to 25 pounds of files, documents, and materials. About Stellar Stellar offers a comprehensive package which includes: • Competitive pay based on experience, • Remote & hybrid work options for many positions, • Paid Time Off – accrue 15 days (120 hours) within first year of service, • Paid holidays, • Medical, dental, and vision insurance options, • Tax-advantaged accounts (HSA, FSA, Dependent Care FSA), • Company-paid life and disability insurance, • 401(k) – company match with immediate vesting Stellar, headquartered in Jacksonville, FL, is a fully integrated firm focusing on design, construction, architecture, engineering, and mechanical services worldwide for over 30 years. Stellar combines a multitude of capabilities to create buildings and systems of exceptional long-term quality, value and efficiency. From food processing plants and healthcare facilities to refrigerated warehouses, automated production lines and beyond, we offer an integrated approach to meet all our clients’ needs. Stellar is an Equal Opportunity Employer and does not discriminate against any applicants for employment based on their race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, physical or mental disability, genetic information, veteran status, uniformed servicemember status, or any other status protected by law.

Job Description We are currently hiring a Director of Civil Engineering to lead our civil practice from our Jacksonville, Florida office (relocation assistance available for qualified candidates). In this leadership role, you will guide both the technical execution and long-term strategy of civil engineering efforts tied to DoD projects. The position requires strong expertise in military design standards, cross-discipline coordination, and the ability to mentor and grow a high-performing team serving U.S. military clients, all while aligning with the company's Mission, Vision, and Values. At RQC, LLC, our work goes beyond delivering buildings, we focus on developing careers and executing projects that make a lasting impact. Headquartered in Carlsbad, with offices and active job sites across the country, our organization includes a rapidly expanding Engineering team in Jacksonville. As a privately owned, full-service design-build firm, we specialize in accelerated commercial construction projects for the Department of Defense, offering a fully integrated approach that brings design, engineering, and construction together. Why Join RQ? Joining RQ means becoming part of a collaborative, multidisciplinary environment where innovation and continuous learning are encouraged. Our engineers contribute to a wide variety of impactful projects across the U.S. and internationally, working alongside dedicated professionals who are committed to quality and excellence. As our engineering group continues to expand, you'll have the opportunity to influence processes, help shape organizational direction, and work with advanced tools and technologies. We offer a competitive compensation package, comprehensive benefits, and a flexible hybrid work schedule to support your professional growth. Education & Experience Requirements • Bachelor's degree in Civil Engineering (Master's preferred), • Active Professional Engineer (P.E.) license, • Minimum of 15 years of experience in civil/site design, with exposure to military or DoD infrastructure projects preferred, • Proficiency with design tools such as AutoCAD Civil 3D, StormCAD, HEC-RAS, InfoDrainage, or similar, • Working knowledge of federal contracting approaches, including Design-Bid-Build (DBB), Design-Build (DB), and Early Contractor Involvement (ECI) in accordance with FAR guidelines, • Strong familiarity with applicable federal, state, and local regulations, permitting processes, and codes We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for). Job Posted by ApplicantPro

Job Description Job Summary The Engineer I is part of a unit designing excavation shoring projects, working under a Professional Engineer. Ensures that engineering design, complies with the project objective and contractual requirements i.e. project schedule, company standards, and procedures. Key Responsibilities • Design excavation shoring plans., • Provide advice and assistance to personnel on all matters about engineering., • Solve customer needs with equipment rented and designed by NTS., • Communicate with Sales on the best solution for the customer’s needs., • Plan, schedule, and provide work direction when required for preparation of designs, processes, and related data., • Bring elements of a project together, makes certain that all elements proceed satisfactorily on schedule and initiates corrective action as required., • Knowledge of AutoCAD and Revit., • Knowledge of Microsoft Office., • Knowledge of statics and mechanics of materials, • Analytical problem-solving and presentation skills, • A bachelor's degree in Civil/Structural/Geotechnical Engineering, • Associated classes: Statics, Steel Design, Concrete Design, Foundations, or Geotechnical Design Why work for NTS? We offer a competitive salary with a generous and comprehensive benefit package, including: • Excellent medical, dental, and vision plans, • 401(k) retirement plan with company match and immediate vesting, • Team Ownership Program (TOP) grants an annual stock award to every active full-time employee. TOP is unique for a privately held company but is offered to show how much we value our employees!, • Flexible spending and health savings accounts, • Basic and Voluntary life and disability insurance, • Paid Time Off that is either awarded or begins to accrue on the first pay period, • 8 paid holidays, • Birthday and Work Anniversary holidays after one year of service, • Incentive bonus plans About our Team: At National Trench Safety (NTS), our team of employees is our most valuable asset and one of our customers’ greatest resources. NTS was built around a team of experienced industry professionals, and as NTS continues to grow we continue to attract talented individuals. The NTS team contains some of the industry’s most respected and recognized trench safety veterans. NTS is a customer service-focused organization, which can be reflected in the company’s culture and commitment to its customers. NTS is an equal opportunity employer M/F/D/V. Qualified candidates will receive consideration for employment regardless of race, color, religion, sex, nation origin, sexual orientation, gender identity, disability, or protected veteran status.

Job DescriptionWe are seeking a highly skilled Structural Engineer III to join our dynamic team. This role involves significant responsibility, offers the opportunity to work on a variety of challenging projects, and provides upward mobility. If you are a dedicated professional with a passion for structural engineering, we want to hear from you! Key Responsibilities • Perform Structural Analysis and Design: Utilize applicable codes and standards to conduct structural analysis and design., • Develop Technical Documents: Create layouts, calculations, drawings, and specifications., • Lead Design Phases: Lead or support schematic and conceptual design phases., • Review and Coordinate: Review shop drawings and coordinate with other disciplines., • Project Leadership: Serve as lead or project engineer on assigned projects., • Supervise Team Members: Supervise and guide Designers/Drafters as needed., • Conduct Field Visits: Verify site conditions and measurements through field visits., • Use Engineering Software: Employ software such as AutoCAD, Revit, RAM, etc., to produce design documents., • Client Interaction: Participate in client meetings, proposals, and business development., • Coordinate with Construction Teams: Work closely with construction teams on design-build projects., • Prepare Technical Documentation: Organize and prepare technical documentation.Qualifications, • Education: B.S. in Civil Engineering (required); M.S. preferred., • License: Registered Professional Engineer in Florida (required)., • Experience: 10+ years in structural engineering; federal project experience preferred., • Certifications: LEED AP BD+C is a plus., • Software Proficiency: Proficient in AutoCAD, Revit, RAM, Mathcad, Enercalc, Microsoft Office.Skills and Competencies, • Technical Knowledge: Strong technical knowledge and problem-solving skills., • Communication: Excellent verbal and written communication skills., • Project Management: Ability to manage multiple projects and meet deadlines., • Leadership: Leadership and mentoring capabilities., • Collaboration: Collaborative and client-focused mindset. Qualified applicants at GMHILL must be U.S. citizens or lawful permanent residents and must meet client security requirements. Positions requiring security clearance are open to U.S. citizens only. Disclaimer: This is not to be an exclusive list of all responsibilities, duties, and skills required of the person in this job. G.M. Hill Engineering, Inc. (GMHILL) is an Equal Opportunity Employer. GMHILL considers all applicants for employment without regard to race, color, sex, national origin, religion, age, physical or mental disability, family responsibility, marital status, sexual orientation, political affiliation, veteran's status or any other legal protected status. Candidates selected must pass a thorough background check (including E-Verify) and comply with GMHILL’s Drug and Alcohol policy adhering to pre-employment, random, post-accident and for cause testing. Powered by JazzHR O7KsVlZheK

Job DescriptionDescriptionCPH is looking for a talented Water/Wastewater Engineer to join our growing team in Jacksonville, FL. Hiring Bonus of up to $5,000 for selected candidate! This role offers an exciting opportunity to work on impactful municipal infrastructure projects from initial planning and design through permitting, construction, and project close-out. Our projects span from small wastewater collection or water distribution projects to multi-MGD water and wastewater treatment facilities. Duties Include • Assist in the planning, design, and construction administration of water and wastewater treatment facilities, pump stations, pipelines, and utility systems., • Prepare construction drawings, technical specifications, design calculations, permitting documents, and cost estimates., • Perform technical analysis and research, hydraulic modeling, and report preparation., • Engage directly with municipal clients, regulatory agencies, and project stakeholders., • Participate in field investigations, site visits, and construction oversight., • Bachelor’s Degree in Environmental or Civil Engineering, • Must have passed their FE Exam, • 3+ years of relevant experience in water/wastewater engineering, • Proficiency in MS Office, including Word, Excel, and Outlook, • Proficiency in AutoCAD, Civil 3D, WaterCAD, or similar design software is a plus, • Dependent upon experience., • CPH offers Medical, Dental and Vision and Long-Term Disability with a quality insurance company., • Company Paid Life Insurance and Short-Term Disability., • 401K, Paid Personal Time Off, Paid Holidays, and Paid Paternal Leave.CPH is an Equal Opportunity/Affirmative Action/Drug Free Work Environment Employer.

Job DescriptionJob Title: Application Engineer Job Location: Jacksonville FL Operating Company: Stan Weaver & Company, Inc. FLSA Status: Exempt About: Stan Weaver & Company, Inc. - A member of the AIR Control Concepts family. Stan Weaver & Company, Inc. is a leading manufacturer’s representative with offices in Tampa, Orlando, Jacksonville, Miami, and West Palm Beach. The company represents the leading manufacturers in the air distribution industry. Products are promoted to engineers and owners through our staff of engineers and sold to contractors through our experienced sales team. Our company provides support to engineers that design heating, ventilating and air conditioning systems on products ranging from air distribution, fans, energy-recovery ventilators, packaged ventilation, make-up air units, dampers, louvers, kitchen ventilation systems, laboratory exhaust systems, and more. You will find our flagship ventilation products behind walls, in ductwork, and on the roofs of hospitals, office buildings, hotels, shopping malls, restaurants, schools, industrial plants, warehouses, data centers, and other commercial buildings. The support we provide is for the selection of equipment used in these systems with the knowledge and impact of both state and federal codes. Check out our website: Stanweaver.com | Partner for HVAC Solutions Job Description: An excellent career opportunity is currently available for an Application Engineer within Stan Weaver and Company. This position will primarily focus on developing relationships with consulting engineers and owners. While also providing technical expertise to the Stan Weaver sales team. Your role will include assisting engineers, architects and owners lay out products as effectively as possible with a solution focused approach. Your role will include supporting our sales staff with technical knowledge of the engineered products that we represent. This will include pricing of complex systems and a thorough understanding of those systems. The role will provide technical sales support to our sales team and customers with our product lines to ensure that effective proposals and project support are provided. The Application Engineer will also work closely with manufacturers with market guided knowledge of the products that we represent. Essential Duties and Responsibilities: • Develop technically innovative product solutions to sales opportunities for both retrofits and new projects., • Ability to prioritize and execute tasks quickly while maintaining stated objective., • Become proficient in the company’s software system used to do product selections, pricing, and quotations., • Detail-oriented skills to ensure all parts of an application come together and work as intended., • Prepare and maintain engineering support material to be used by engineering and sales including technology presentations., • Coordinate with Sales on how to respond to client requests with appropriate responses that meet customer requirements through the various stages of the sales process., • Participate in setting and implementing product sales marketing tools based on company driven priorities., • Work with Engineering and Sales to develop technical proposals and presentations., • Seek prioritization of projects from management when unable to meet all commitments., • Bachelor’s Degree in Mechanical Engineering or Construction Management, • 3+ years of HVAC Engineering related experience, • Outgoing personality with experience in sales and working with customers, • The ability to effectively interface with sales, contractors and engineers is strongly preferred., • Strong verbal and written communication skills., • Strong interpersonal and presentation skills., • Technical understanding and experience with HVAC technologies is considered ideal., • Capable of working independently, • Ability to work effectively in a rapid pace work environment., • Ability to understand and apply business considerations to project support., • Comprehensive Benefits Coverage – Access to medical, dental, vision, voluntary life, supplemental insurance, and more effective the first of the month following date of hire., • Retirement Savings Plan – 401(k) with company match available beginning the first of the month following date of hire., • Paid Time Off & Holidays – Enjoy paid time off along with paid company-recognized holidays., • Paid Parental Leave – Support for growing families with paid parental leave benefits., • Company-Paid Disability Coverage – Short-term disability coverage provided at no cost to employees. AxPJeBzB1V

Job Description RQ Construction is currently looking for a Structural Engineer to join our Jacksonville, FL Engineering team. In this role, you will primarily focus on developing structural models and producing design drawings while collaborating with a multidisciplinary group of engineers and designers across several concurrent projects. At RQC, we do more than construct buildings, we develop careers and deliver high-value projects that make a lasting impact. Headquartered in Carlsbad, CA, with regional offices and project sites across the country, we also have an expanding Engineering team based in our Jacksonville, FL office. RQ is a privately owned, full-service design-build firm focused on fast-track commercial projects for the Department of Defense, delivering fully integrated design, engineering, and construction services under one roof. Why Work at RQ? Joining RQ means becoming part of a collaborative and forward-thinking engineering environment where innovation and continuous learning are valued. Our engineers contribute to a wide range of meaningful projects throughout the U.S. and internationally, working alongside dedicated professionals in engineering, design, and construction. As our engineering department continues to grow, you will have opportunities to help shape internal processes, influence technical direction, and work with advanced tools and technologies. RQC offers strong career development potential, competitive compensation, comprehensive benefits, and a flexible hybrid work arrangement. Qualifications: • Bachelor's degree in Civil or Structural Engineering required, • Professional Engineer (P.E.) license required, • 3-5 years of experience in structural engineering design, • Proficiency with relevant software, including Revit/Autodesk, RISA Floor, RISA 3D, RISA Foundation, TEDDS, Microsoft Word, and Microsoft Excel We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, creed, gender (including gender identity and gender expression), religion (all aspects of religious beliefs, observance or practice, including religious dress or grooming practices) marital status, registered domestic partner status, age, national origin or ancestry, physical or mental disability, medical condition (including cancer or a record or history of cancer, and genetic characteristics), sex (including pregnancy, childbirth, breastfeeding or related medical condition), genetic information, sexual orientation, veteran status, or any other basis or status protected by federal, state, or local law or ordinance or regulation. All candidates considered for hire must provide evidence of identity and U.S. work authorization at the time of hire. Additionally, all candidates must successfully pass a drug screening and commercial criminal background check, including a stricter Department of Defense background check, for access to job site at military base (if applicable for position being hired for). Job Posted by ApplicantPro

Job Description An industry leading multi-disciplinary team is looking for a Senior Structural Engineer for their Jacksonville team! Responsibilities: • Project/Client management, • Business development (prepare proposals/administer project contracts), • Plan/manage design process, • Use technical expertise regarding local/national building codes/design practices, • Supervise staff, • Design new building structures, structural alterations, renovations and additions to existing buildings, • Prepare structural assessment reports, • Design/detailing of structure (calculations/computer modeling for steel, concrete, masonry and timber structures), • Manage/coordinate projects, • Perform site reviews/construction administration services during the construction phase, • Ensure designs adhere to QA/QC standards, • Attend client meetings Requirements: • Bachelor’s Degree in Structural or Civil Engineering, • Master’s degree preferred, • 8+ years of Structural Design Experience, • PE License preferred, • Working knowledge of structural analysis/design software (REVIT, RISA 3D, RISA Floor, ADAPT) Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! 517-906-6926

Job DescriptionEmbassy Suites is currently seeking a Chief Engineer The Chief Engineer is responsible for operating and maintaining the property's exterior and interior facilities including HVAC, plumbing, electrical systems, general equipment, and grounds. Benefits • Health, vision and dental insurance, • 401(k), • Vacation and Sick Pay, • Paid Holidays, • Employee Referral Program, • Opportunities for Advancement, • Hotel Discounts for you, your friends and family, • Access to our Talent team to help you reach your career growth goalsResponsibilities, • Responsible for maintaining the entire hotel facility including physical building structure, grounds, all mechanical, electrical, HVAC systems and related equipment, • Preventative maintenance and repair of the hotel's mechanical/electrical systems and equipment, and for the general maintenance and upkeep of the facility, FF&E, grounds, swimming pool, etc., • Monitor life safety systems and utilities and administer the department on compliance with all corporate/franchise standards and local, state and national codes and regulations to protect assets, guests and associates., • Other duties as assignedQualifications, • High School Diploma/GED required OR 5 years related experience and or training, • Hospitality experience preferred, • Knowledgable of basic repair and maintenance skills including carpentry skills, grouting, painting, caulking, and blueprint reading, • Must be highly motivated and able to work independentlyEEO Statement We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job DescriptionSalary: $85,000.00 - $115,000.00 Job Summary: CORYS Inc. seeks an Electrical Engineer to join our team in Jacksonville, FL. This full-time role supports our nuclear power simulation group, focusing on developing and maintaining electrical modeling software. The ideal candidate will bring experience in embedded systems and electrical simulation technologies, contributing directly to advanced modeling projects. Job Duties: • Develop, analyze, and maintain software models of electrical distribution systems using CORYS proprietary model development environment., • Support projects specifically involving electrical modeling software, working closely with other electrical and software engineers., • Apply knowledge of embedded systems to support the integration of hardware and low-level software into simulation platforms., • Collaborate with multidisciplinary teams to design and validate simulation models aligned with customer requirements., • Conduct short-term on-site missions for meetings, data collection, or customer acceptance., • S. in Electrical Engineering, Physics, Mathematics, or a related discipline., • 3 to 5 years of experience with electrical theory and embedded systems development., • Strong background in C++ and FORTRAN programming languages., • Experience with embedded software or firmware integration in real-time systems is highly desirable., • Proficiency with Windows-based development tools., • Solid organizational and time management skills to meet project deadlines., • Excellent interpersonal and communication skillsverbal and written., • Demonstrated ability to work effectively in a diverse, collaborative team environment., • Must be a US Citizen. About CORYS Inc.: CORYS Inc. is a global leader in simulation solutions for the power, rail, and hydrocarbon industries. As a subsidiary of CORYS SAS in France, we bring over two decades of industry leadership and innovation in full-scope training and engineering simulation technologies. With over 250 employees worldwide, CORYS supports more than 850 operational systems across the globe. We offer an exciting work environment, career advancement opportunities, competitive pay and benefits, a generous bonus program, relocation assistance, and have a pet-friendly office environment.