Electrical distribution jobs in Merrick, New YorkCreate job alerts

Job Description The Building People, LLC, has a position open for a full-time HVAC/R Technician for the facilities engineering program to support a federal Agency. The HVAC Technician will have a strong focus on operating, maintaining, troubleshooting and repairing facility equipment on all systems. Individuals are expected to demonstrate technical expertise in HVAC trade and be multi-skilled in others (Electrical, Piping/Plumbing, Central Utility Plant Operations) in order to successfully complete daily/weekly work assignments. Responsibilities will include, but not be limited to: • Perform maintenance, monitoring repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep facility and building systems up to applicable standards as assigned, • Maintains responsibility for facility services, corrective maintenance, inventory control, general maintenance and technical proficiency., • Maintenance of the equipment will include cleaning, inspecting, calibrating and changing parts to maintain the HVAC systems and associated equipment at optimum performance levels, • Maintain heating equipment, chillers (air and/ or water cooled), DX units, pumps, cooling towers, fan coil units, VAV, and air distribution systems, etc., • Knowledge of the tools, materials, and test equipment used in the installation,, • Maintenance and repair of air conditioning/refrigeration HVAC control systems., • Install, maintain, and repair HVAC controls, including DDC, pneumatic, electric, and electronic controls., • Troubleshoots and repairs HVAC/BAS control problems, including dampers, coils, HVAC steam related controls, air handling equipment, and all types of valves., • Adjusts and calibrates pneumatic/electronic devices to balance all HVAC systems., • Inspects and services controls on a scheduled basis., • Responds to service calls and troubleshoots problems., • Prepares estimates for the repair and/or installation of new Mechanical, Electrical and Plumping systems and makes recommendations for such repairs and services., • Troubleshoots and tests controls using test gauges, amp meters, hydro thermographs, and computers., • Repair equipment and perform corrective maintenance in assigned programmatic area(s)., • Inspect and test equipment / systems to ensure that technical integrity is maintained and if necessary, proposes appropriate corrective action., • Review pertinent technical manuals to remain current with technology and electrical safety codes., • Work indoors & outdoors in the installation and maintenance of a wide - array of technical equipment; use of ladders, safety equipment and ability to navigate rooftops and tight spaces may be required, • Applies technical knowledge to perform simple or routine tasks following detailed instructions., • Receives technical guidance, as required, from supervisor or higher-level technician., • Five (5) years of commercial HVAC/R journeyman level experience., • Communication skills required to interface and coordinate with other technicians., • Must hold EPA Universal level certification per Section 608 of the Clean Air Act., • Must hold NATE, HVAC Excellence Professional/Industry, or UA Star Mastery certification., • Experience setting up and managing BAS schedules, set points, and alarms., • Experience with general RCM practices and procedures., • Capable of performing physical labor including, walking, standing, lift up to 40lbs, pulling, climbing up and down ladders and agility/dexterity to perform duties assigned., • Must be able to successfully pass a government background investigation Preferred Experience & Skills • Familiarity with Niagara, • Skills in Maximo or CMMS Required Education • High School Diploma of GED Equivalent

This Jobot Job is hosted by: Kelly Breen Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $120,000 per year A bit about us: We are a trusted Illinois-based engineering firm providing innovative solutions across infrastructure, buildings, transportation, and energy. With a focus on quality, sustainability, and community impact, we bring technical expertise and creative problem-solving to every project. Why join us? Work on diverse, high-profile projects that shape communities Competitive compensation and comprehensive benefits Strong commitment to professional growth and mentorship Collaborative, inclusive team environment Opportunities to make a lasting impact through meaningful work Job Details Job Details: Our company is seeking a talented and experienced Senior Distribution Electrical Engineer to join our Utilities team in the Engineering industry. This role is perfect for a seasoned professional who is passionate about designing and implementing electrical systems, and has a deep understanding of underground power installation. The successful candidate will be responsible for creating high-quality designs and plans, using software like AutoCAD and MicroStation, and managing electrical assets using Asset Suite. This is a permanent position, requiring a minimum of 5+ years of experience in a similar role. Responsibilities: • Design and develop electrical distribution systems for utility projects using AutoCAD and MicroStation software., • Oversee and manage the installation, maintenance, and operation of underground power systems., • Utilize Asset Suite to effectively manage and track electrical assets., • Perform complex calculations to determine the functionality and efficiency of electrical systems., • Collaborate with project managers and other engineers to ensure projects are completed on time and within budget., • Prepare and present technical reports detailing the status and outcomes of projects., • Ensure all designs and installations comply with industry safety standards and regulations., • Troubleshoot and resolve any issues that arise during the design, installation, or operation phases., • Bachelor’s Degree in Electrical Engineering or a related field. A Master's degree or Professional Engineer (PE) certification will be an added advantage., • A minimum of 5+ years of experience in electrical distribution design and underground power installation., • Proficient in AutoCAD, MicroStation, and Asset Suite., • Strong knowledge of electrical systems, safety standards, and regulations., • Excellent problem-solving abilities and attention to detail., • Strong leadership skills with a dedication to driving and achieving results., • Excellent interpersonal and communication skills, with the ability to explain complex concepts in a clear, concise manner., • Ability to handle multiple projects concurrently and meet tight deadlines., • Self-motivated with a results-driven approach., • Ability to work in a team and foster a collaborative environment. Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job Description Power-Flo Technologies is the premiere provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are looking for an experienced Inside Sales Representative (electrical and industrial products) to join our New Hyde Park location. The Inside Sales Representative is responsible for maintaining and growing existing accounts, making proactive inside telephone sales calls to potential new customers and supporting the outside sales team. Daily Tasks: • Responsible for supporting customers, outside sales, internal operations, and suppliers in all aspects of the pre-sale and post-sale processes, • Create sales quotes and follow up with customers to close orders, • Receive and process purchase orders, • Develop relationships with existing customers and new sales leads, • Reaching out to customers on an as needed basis to inquire about potential future needs, • Increase sales by generating new customers and selling additional products to existing customers, • Provide best in class customer service to our customers at all times, • Continued education - vendor training and product knowledge, • Well versed in product offerings PFT has to offer Qualifications: • 2+ Years of electrical, lighting, industrial or power distribution sales experience required, • Ability to multi-task must be strong with details and possess strong organizational skills, • Exceptional interpersonal and customer service skills, • Experience with Microsoft Office software, including Word and Excel (basic knowledge), • Epicor Solar Eclipse experience is a plus, • Ability to work well both independently and in a team setting, • Excellent written and verbal communication skills, • Problem solving and reconciliation skills necessary, • Valid and clean NYS driver's license Physical Ability Requirements (with or without reasonable accommodation) • Ability to sit for prolonged periods of time, • Ability to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time Salary Range: $25.00 - $43.00/hour (depending on direct industry and product experience) Full-time, on-site. Monday-Friday Competitive Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • EAP, • 401K, • ESOP (Employee Stock Ownership Plan) Learn more about us here: Follow us on LinkedIn: Our Core Values • Our People, • Relationships, • Innovation, • Sustainability, • Growth, • Determination About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

The Territory Manager, Protection and Controls, is responsible for achieving overall sales goals and growing the installed base of Hubbell's technology products and services designed to secure, operate, and optimize the electrical distribution grid within the assigned territory.

The Sales Director, Protection and Controls, is responsible for achieving overall sales goals and growing the installed base of Hubbell's technology products and services designed to secure, operate, and optimize the electrical distribution grid within the assigned territory. Utilizing both direct a

As a live entertainment venue operating year-round, this role supports concerts, sporting events, and building oper Electrician, Operations, Electrical, Motors, Journeyman Electrician, Distribution, Skilled Trades.

Job Description Job Title: Lead AV Installation Tech TechPro Home Automation is a premier provider of smart home technology, custom audio‐video systems, and integrated home solutions. We design, install, and support high‐performance systems that elevate the way clients live, work, and entertain. Our team is known for its craftsmanship, professionalism, and commitment to delivering exceptional client experiences. As we continue to grow, we’re looking for talented individuals who take pride in their work and want to be part of a collaborative, forward‐thinking environment. We are currently seeking an experienced Lead AV Installation Technician to join our team. The ideal candidate will have 4+ years of AV installation and integration experience, strong leadership skills, and the ability to guide technicians through complex residential technology projects. This role is hands‐on, client‐facing, and essential to ensuring our installations meet the highest standards of quality and performance. Key Responsibilities: Leadership & Mentorship • Teach, mentor, and guide field technicians and junior technicians through installation and commissioning of AV and home integration systems., • Lead installations for AV control systems including wire ring‐out, system commissioning, and device configuration., • Perform wire management, trimming, labeling, and termination (RG6, Fiber, Cat6/Cat6A, RJ‐45 compression, soldering, etc.)., • Install lighting keypads, touch panels, and other control interfaces., • Program URC remotes and control system configuration., • Install TV brackets, lifts, and mechanical display support devices., • Document status reports, procedures, and project updates within company project‐management software., • Provide daily updates to the project team through the applicable platform., • Review and complete daily task list items/work orders in alignment with project timelines., • Collaborate with project team members to set up and test AV signal flows, equipment functionality, and system programming., • Communicate proactively with project managers and stakeholders regarding construction constraints, design changes, or installation challenges., • Perform diagnostics, troubleshooting, and system testing during installation phases., • Document and resolve issues as they arise., • Load programming and provide client training at project completion. Required Skills & Knowledge • High school diploma or equivalent preferred., • Expert understanding of:, • Audio & video distribution (HDMI, IP‐based AV, matrixing concepts), • IR, RS‐232, and network‐based control protocols, • Networking fundamentals including VPNs and port forwarding, • Savant, Josh.ai, and/or Control4 ecosystems, • Lutron lighting and shading systems, • HVAC and thermostat integration, • Comfortable working with VIP clientele in fast‐paced environments., • Familiarity with product lines including Savant, Josh.ai, Control4, Sonos, Lutron, SnapOne, Access Networks, Sonance, Future Automation, and Coastal Source., • Ability to lift, move, and push up to 50 lbs., • Ability to stand, walk, climb, sit, and use hands/fingers for extended periods., • OSHA 40 and applicable SST certifications required (or ability to obtain prior to start date)., • Competitive salary based on experience, • Medical insurance benefits, • 401(k) retirement plan, • Generous PTO policy, • Access to employee purchase opportunities, • Casual work environment with strong commitment to work/life balance. If you are enthusiastic about technology and possess the skills to thrive as a Lead AV Install Technician, we invite you to apply. Become a part of our mission to deliver outstanding AV solutions and experiences for our clients! Application Instructions: To apply, please submit your resume along with a cover letter highlighting your relevant experience and qualifications. We look forward to your application! Company DescriptionTechPro Home Automation is a premier provider of smart home technology, custom audio‐video systems, and integrated home solutions. We design, install, and support high‐performance systems that elevate the way clients live, work, and entertain. Our team is known for its craftsmanship, professionalism, and commitment to delivering exceptional client experiences. As we continue to grow, we’re looking for talented individuals who take pride in their work and want to be part of a collaborative, forward‐thinking environment.TechPro Home Automation is a premier provider of smart home technology, custom audio‐video systems, and integrated home solutions. We design, install, and support high‐performance systems that elevate the way clients live, work, and entertain. Our team is known for its craftsmanship, professionalism, and commitment to delivering exceptional client experiences.\r\n\r\nAs we continue to grow, we’re looking for talented individuals who take pride in their work and want to be part of a collaborative, forward‐thinking environment.

Job DescriptionFST Technical Services Commissioning (Cx) division is one of the leading Cx firms in the country. We partner with clients for quality assurance in the design, construction, and post-acceptance phases of building projects. We ensure that equipment in mechanical, electrical, plumbing, and associated systems are designed, installed, and functionally tested to meet the clients requirements and design intent. We have extensive experience working on healthcare facility projects, ensuring that critical systems operate reliably and efficiently to support patient care and safety. For this position of Commissioning Field Engineer II on offer includes an excellent salary and benefits package. About the Job: A Field Engineer II reports directly to his or her Team Leader and to the team’s Project Engineers, and is directly responsible for the execution of field and office assignments as directed. Essential Functions Field Engineer must have general knowledge of the following topics: Refrigeration, HVAC, Steam management and distribution systems, pumps, fans, motors, chillers, boilers, air ventilation balancing systems, BMS systems and VAV. Field Engineer holds the following responsibilities: • Site Inspections and reports., • Equipment Testing., • Submittal Review and preparation of comments, • Document and Specification reviews and updates, • Create and execute commissioning checklists for the respective equipment and systems as directed by the team leader, • Collection and tabulation of field data using FST testing equipment, • Preparation and writing of reports., • Proper use of FST test equipment including maintenance, cleaning and reporting damages to their respective Team Leader, • Assist in executing performance test requirements., • Individual Time and Expense management., • Any special projects as requiredRequirements: • Bachelor’s Degree in Mechanical/ Electrical Engineering, minimum 1-3 years of experience., • Must be a self-starter and capable of working independently or in a team environment., • Must possess a strong desire to learn and participate in the company developmental training program, • Trade Professional affiliation, a plus., • Proficiency with Microsoft products (Word, Excel, Power Point, etc.)Technical writing skills a plus, • Strong ability to work in changing environment and adapt to varying working environments., • Must be able to lift at least 30 pounds and climbing ladders Pay range $75k-$85k based on experience. FST Technical does not offer employment-based visa sponsorship for this position. Applicants must be legally authorized to work in the United States without the need for employer sponsorship now or in the future. Powered by JazzHR Kbs1DJDIMm

Job Description Who We Are South Oxford Management (SOM) is a leading full-service property management company with a presence in Texas, Georgia, Virginia, New Jersey, Florida, and Connecticut. We are committed to delivering exceptional experiences for both our residents and team members. Our owners and leadership team bring extensive industry experience, ensuring that quality and excellence are woven into every facet of our operations—from asset management to leasing. We are passionate about creating positive experiences and believe in putting people first. When you become a part of South Oxford Management, you join a supportive team that values learning, encourages idea sharing, and actively engages in team building and community service activities. How You Will Contribute The Maintenance Supervisor is responsible for maintaining the physical integrity of the community, ensuring a safe and secure environment for residents, future residents, visitors, and team members. The Maintenance Supervisor collaborates closely with the Community Manager and Maintenance Technicians to ensure that all aspects of the community are well-maintained. The Maintenance Supervisor anticipates, identifies, and corrects problems affecting the community, and implements procedures to prevent such issues. The Maintenance Supervisor works diligently to cultivate resident satisfaction. The start date is anticipated between May 01, 2026. Things You Will Do Leadership • Assist in the hiring, training, and supervising of all maintenance team members through a positive mentoring approach, • Lead service staff, delegate work orders, and inspect completed jobs, • Perform routine maintenance work orders at the community, which may include completing emergency and on-call tickets, • Schedule team members so that maintenance is available for emergency purposes around the clock, • Ensure OSHA and safety standards are followed, • Maintain accurate records regarding preventive maintenance, maintenance requests (received and completed), expenditures, apartment make-ready status, work-in-progress, etc, • Schedule and ensure all make-ready repairs and services are completed correctly and on schedule according to company policy, • Maintain an adequate inventory of spare parts and maintenance materials to handle the most common repairs and situations, • Keeping the Maintenance Shop stocked, organized, and clean, • Diagnose and perform maintenance/repairs, including but not limited to HVAC, plumbing, electrical, and pool maintenance, • Interface with contractors and vendors; depending on the property needs and secure bids for services, • Think safety first and ensure that unsafe conditions are corrected promptly, • Be mindful of the condition of the community and initiate action to correct unsafe conditions, i.e., broken gates leading to the pool, broken steps, open holes, broken/burned-out exterior lights, • Always bring “service with a smile”, partnered with a "can-do" attitude, • Act as the gatekeeper of maintenance information — tracking and assigning everything from resident service requests to preventive maintenance records., • Take pride in the apartment community; visually inspect and address areas of concern, keep the community clean, and make note of service needs, • Communicate effectively with residents, future residents, visitors, vendors, and team members while presenting a positive, professional image, • You must have a valid driving license., • High School diploma or equivalent, • Three or more years of experience in property maintenance or an equivalent field., • Must be available to work a flexible schedule, including weekends, holidays, overtime, and on-call hours., • Must be able to walk the property, which includes climbing stairs., • Must be able to bend, stoop, squat, kneel, climb stairs, push, pull, reach, and carry supplies., • Stand for extended periods of time., • Experience leading and managing others., • General knowledge of all things pertaining to property maintenance., • Proficient and comfortable using computers and various software programs., • Skilled in the safe use and maintenance of hand and power tools., • Knowledgeable of pertinent laws, including EPA and OSHA regulations., • Certified Pool Operator, Universal Freon License, including R410A preferable., • Attention to detail., • $45.67 hr., • Medical/Rx, • Dental, • Vision, • Employer Paid Life/AD&D, • Voluntary Life/AD&D, • Short Term Disability, • Long Term Disability, • Employee Assistance Program, • Accident Plan, • Hospital Indemnity Plan, • Critical Illness Plan, • Legal/ID Theft Protection, • Pet Insurance, • 401(k) Retirement w/ Match + Immediate Vesting, • Paid Holidays and Time Off (3+ weeks), • Rent Discount (30%), • Tuition Reimbursement($2,000/year), • Paid Parental Leave (4 weeks), • Employee Referral Bonus South Oxford Management LLC is committed to providing a workplace that is free from the use, sale, possession, or distribution of illegal drugs and alcohol, as well as free from the abusive use of legal drugs or alcohol. All job applicants are required to take and successfully complete a drug and/or alcohol test before they will be permitted to begin employment. Applicants who refuse to take a test or do not cooperate with the test representatives will not be permitted to begin employment. If a test yields a positive result for drugs or alcohol, the Company may withdraw the offer of employment to an applicant where permitted by state law.

Job Description Power-Flo Technologies is the premiere provider of supplies, services, and solutions to the electrical, industrial, mechanical, and automation industries. We are now hiring an Electrical and Lighting Sales Manager to lead our New Hyde Park team. As the Electrical and Lighting Sales Manager, you will lead and grow electrical and industrial sales across the Long Island and NYC region by building strong customer relationships, developing high-performing sales teams, and driving strategic growth. Essential Responsibilities • Own regional electrical, lighting, and industrial sales performance, with accountability for revenue growth and profitability, • Lead a high-performing inside sales team through coaching, performance management, and professional growth, • Build and maintain relationships with key customers and strategic accounts across the region, • Develop and maintain vendor relationships, • Collaborate with branch leadership, operations, and marketing to ensure alignment across sales execution, messaging, and customer experience, • Analyze performance metrics, pipeline health, and market trends to forecast results and adjust strategy as needed, • Represent the company at industry events and customer meetings To be considered for this role, you must possess: • Proven experience leading sales teams in the electrical, lighting, industrial, and/or power distribution industry, • Track record of driving revenue growth and leading high-performing sales teams, • Proficiency with Microsoft Office, • Experience with ERP system Epicor Solar Eclipse a plus, • Excellent verbal and written communication skills, • Valid and clean driver’s license Expected salary range: $120,000 - $150,000 base plus bonus eligibility Benefits include: • Medical, dental, and vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) Learn more about us: Follow us on LinkedIn: We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionAbout E-J The E-J Group is active in all facets of electrical contracting, bringing experience, expertise, and a national reputation to projects that range in size up to more than $300 million. With over 4,000 employees across 31 offices, E-J delivers full-service electrical solutions for rail systems, transit facilities, office buildings, hospitals, power, renewable energy, clean energy, co-generation facilities, roadway and outdoor specialty work, airports, industrial facilities, data centers, chip plants, universities, sports stadiums, extra high voltage distribution, utility, and gas infrastructure. At E-J, three generations of family expertise have built an organization that combines practical knowledge with modern technological innovation, providing rapid and efficient solutions for today’s lighting, power, energy, and communication needs. E-J has over a 125-year reputation for integrity, quality, and exceptional service in the electrical field. To learn more, visit . Title/Role: Jr. Estimator Division: Major Projects – Long Island Location: Bethpage, NY Reporting to: Divisional Chief Estimator Position Summary E-J’s Junior Estimators are crucial in the pre-construction phase, providing accurate and competitive cost estimates for electrical projects across various industries. Your experience in estimating and pricing will help drive successful project bids to ensure the company’s continued growth and success in the dynamic Long Island market. Roles and Responsibilities • Review and analyze project plans & drawings, specifications, and other relevant documents to comprehensively understand the scope of work and project requirements, • Assist in preparing detailed and accurate cost estimates for electrical projects, encompassing labor, materials, equipment, subcontractor services, and other associated expenses, • Utilize industry-standard software and tools (McCormick, Bluebeam) to generate estimates, ensuring precision and consistency in the estimation process, • Account for factors such as market conditions, labor rates, and material costs, • Collaborate with the bid team to develop comprehensive bid proposals, ensuring compliance with client requirements and specifications, • Participate in bid meetings/leveling meetings and presentations, providing insights into the estimation process and the rationale behind pricing decisions, • Solicit and evaluate quotes from suppliers and subcontractors to secure competitive pricing for materials and services, • Develop and maintain strong relationships with vendors and subcontractors to get pricing and information back quicker and quality resources, • Stay updated with industry trends, advancements, and regulatory changes that may impact project costs or estimating techniques, • Share insights and best practices with the team to enhance overall estimating capabilitiesQualifications, • Bachelor’s degree in electrical engineering, construction management, or a related field preferred, • 1-3 years experience preferred, • Knowledge of electrical construction practices, materials, and methodologies, • Familiarity with industry-standard estimating software and tools (McCormick, Bluebeam), • Excellent analytical and mathematical skills with keen attention to detail, • Effective communication and interpersonal abilities to collaborate with internal teams, clients, vendors, and subcontractors, • Highly motivated team player, • Excellent communication skills, • Proficient in MS Office Suite and Outlook softwareAdvantages of Working at E-J, • Leading Electrical Contracting Organization Nationwide, • Oldest Family-Owned and Operated Electric Contractor since 1899, • Job training and mentorship, • Competitive compensation packages, • Comprehensive benefits, including medical, dental, and 401K plan, • Paid holidays and vacation, • Merit-Based Bonus, • Tuition Reimbursement ProgramSalary Range: $60k-$80k/year The E-J Group is an Equal Employment Opportunity Employer and ensures equal employment opportunity for all persons without discrimination on the basis of race, color, religion, sex, sexual orientation, national origin, age, disability, marital status, citizenship, or any other characteristic protected by law. #LI-PIN Powered by JazzHR PQNJch6u7d

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking a Estimator who will work directly with all department Staff, Supervisors & Managers to setup, reconcile and report on the progress and material/labor costs on all products, jobs and projects. The ideal candidate will have strong organizational, Microsoft Office and CAD drawing review skills, familiar with PC peripherals, basic knowledge of electronics, detail oriented, always willing to ask questions to resolve all concerns and possess an exceptional work ethic. Duties and Tasks: • Identify factors affecting costs, such as product development (NRE's) production time, materials, and labor., • Ability to analyze drawings and other documentation to prepare time, cost, materials, and labor estimates., • Calculate, analyze, and adjust estimates., • Recommend ways to reduce costs without sacrificing quality., • Work with sales teams to review RFP's and new product requests and prepare estimates and bids for clients., • Maintain records of estimated and actual costs., • Provide cost management support and insight for Manufacturing and Product Assembly BOM activities., • Prepare required reports on ongoing jobs/projects, summarizing job/project to-date material and labor costs over/underestimated figures and verify latest BOM costs and report on BOM changes., • Participate in all BOM related support for Design, Engineering, Production and Sales Departments., • Recognize, identify, and correct data errors and process errors, ensure errors are corrected, identified, and reported., • Establish List, Reseller and Distribution channel pricing per predefined markups and discounts., • Work on fixed deadlines, plan work in advance and work efficiently and accurately., • Ownership of the Product Inventory System and content, product/hierarchy numbering, dims, weight, pictures, production drawings and descriptions., • Other duties as deemed essential for the position. Skills/Experience/ Education: • Bachelor's degree or higher., • Reads manufacturing drawings (CAD/CAM) and technical documents to prepare estimates., • Advanced proficiency in Excel., • Familiarity with metal fabrication, • Basic knowledge of electrical components or technical background., • Vendor Management experience, • Experienced with tracking and managing BOM costing revisions., • Experience in Supply Chain Cost Analysis., • Understanding of planning, sourcing, and procurement., • Attention to detail and effective time management skills., • Self-motivated, ability to initiate and follow tasks through to completion and can work independently., • Ability to work in a fast paced, cross functional environment while maintaining composure, focus and a positive attitude., • Proficient and transparent communication skills (verbal, written, listening)., • Good Computer skills (Microsoft Office) 40 WPM typing., • Strong math and excel skills., • Must be able to Multi-task., • Exceptional interpersonal skills., • Strong organizational skills., • Knowledge of Fishbowl is a plus., • Ability to collaborate with cross-functional teams in a rapidly shifting work environment, to deliver value-added results. Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to , or fax resume to 516-253-0209. All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job DescriptionJoin LaundryLux DistributionService Technician What we are looking for: A Service technician who installs, services and repairs commercial laundry equipment including washers, dryers, ironers and other related machinery. Before we continue to dive into the requirements for the role let’s talk about Why you should join LaundryLux Distribution? Career Advancement: We offer a career, not just a job. We invest in the personal and professional growth of every employee because we believe growth leads to both business impact and personal fulfillment. Learning and Development: We foster a culture that encourages and promotes professional growth and development, with continuous learning Diversity Initiatives: We are proud to have launched the Women’s Initiative focused on building a better workplace for women, providing support, and recognizing the talented women within our company. LaundryLux Distribution Benefits: • Health benefits package including medical, dental & vision plans, • Life Insurance, • 401(k) with company matching, • Paid Time Off, • Paid Holidays, • Employee Referral Program, • Mentorship Program, • Service, install, and repair equipment in businesses in accordance with established standards and procedures., • Maintain safety and professionalism at all times., • Promote service, preventative maintenance plans and communicate leads to sales team., • Perform routine maintenance and inspections to ensure equipment is operating efficiently and safely, • Provide a thorough explanation of equipment, its capabilities and operation to the customer; responds to all questions in a courteous and knowledgeable manner., • Diagnose and troubleshoot mechanical and electrical issues in equipment., • Accurately complete all necessary paperwork including but not limited to work orders, service orders, time logs, and emergency information schedules., • Replace or repair defective parts such as belts, valves, motors, and computer boards., • Maintain inventory control of assigned equipment to ensure adequate stock levels;, • Participate in inventory process on a regularly scheduled basis., • Maintain control of all assigned company property and ensures that equipment is always maintained in safe operating condition., • Safely operate assigned company vehicle and ensures that it is maintained according to manufacturer’s specifications., • Exhibit appearance and conduct in accordance with established company standards to present a professional image to customers and the public;, • Maintain the highest degree of decency, honesty, and integrity as a guest in a customer’s business., • Perform other related duties as assigned by management. What you should have:, • Commitment to excellence and high standards., • Strong understanding of electrical and mechanical systems., • Ability to interpret technical manuals, drawings, and schematics., • Proficient in using hand and power tools, • Troubleshooting and problem solving., • Excellent written and oral communication skills, • Ability to effectively present information and respond to questions., • Ability to effectively communicate with people at all levels and from various backgrounds, • Ability to manage priorities and workflow., • Versatility, flexibility, and a willingness to work within constantly changing priorities with enthusiasm., • Ability to work independently with minimal supervision., • Excellent customer service skills., • Proven ability to manage multiple projects and meet deadlines., • Ability to understand and follow written and verbal instructions., • Ability to understand all safety requirements and cautions., • Ability to perform the physical labor necessary., • Valid Driver’s License, • Bilingual skills a plus., • Professional appearance and demeanor Education and Experience:, • High school diploma or GED required., • Minimum of three (3) years’ experience in the residential/ commercial Laundry Industry a plus., • Any combination of education, training, or experience that provides the required knowledge, skills, and abilities. Physical Requirements:, • Must be able to complete various activities in the parts room that may require moving items that weigh 75 lbs., • Ability to operate equipment, i.e., forklift, pallet jack, lift gate. Travel Required:, • Frequent travel to customer locations. People, Share Responsibility, Integrity, Excellence, Customer Focused, Meaningfulness and Fun If you are looking for your next challenge, then this is your chance to join our team of exceptionally talented, creative and innovative professionals. We want you! We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Our company participates in E-Verify.

Job DescriptionCompany Description Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description We are looking for a High School Co-op to join our Schwing Electrical Supply team in West Springfield, MA! Summary: The High School Co-op position is an opportunity for a High School Senior to learn and apply skills mastered in the classroom. This position provides students with supervised on-the-job training. What You'll Do: • Expedite and update purchase orders via ERP system, • Check and respond to e-mail, • Accumulate, prepare, and distribute product spec sheets, • Assist in maintaining product database integrity, • Assist with projects as assigned Qualifications What You'll Need • Enrolled in work study program, • Less Than High School - Preferred, • Reliable, prompt, and willingness to listen and learn, • Good communication and presentation skills, • Organized and efficient, • Knowledge of Microsoft Office Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Constantly – at least 51%, • Walk: Must be able to move about inside/outside office or work location - Occasionally – up to 20%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51% For the state of Massachusetts only, the pay range is $17.00, depending upon qualifications, experience and other considerations permitted by law. Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.