Electrical distribution jobs in Wayne, New JerseyCreate job alerts

Job DescriptionCompany Description Sea Breeze manufactures and distributes premium beverages on tap in the Metro New York—New Jersey area. Since 1925, we provide customized design, installation, and repair of bar guns and beverage dispensing systems to hospitality, educational, and healthcare facilities. We also manufacture a variety of chocolate syrups, pancake syrups, cocktail mixers, and other flavored syrups for retail distribution in the US and globally. Job Description Facility maintenance with mechanical aptitude, building skills, plumbing, electrical, pumps, and related. Experience with maintaining and repairing packaging and processing equipment, including electronic controls, sensors, computer skills, etc. HOURS: Monday – Friday approx. 7:00am-4:30pm Pay/Benefits: * $36.00/hr * Medical/Dental/Life Insurance (after three months) - **100% free medical insurance (extra cost for +spouse, +child or + family) * Generous roll-over vacation and sick time (after three months) with Health Pay Bonus * Bonuses for recruiting new accounts * Consistent year-round work Qualifications -- Experience operating food packaging equipment is strongly preferred – Strong mechanical skills – Strong technology skills – Understanding of electronics, controls, electricity, and pneumatics is an asset – Good work ethic & positive attitude are required -- Pass drug test -- Ability to “take charge” and think outside the box -- Ability to lift up to 50 pounds Additional Information All your information will be kept confidential according to EEO guidelines.

Job DescriptionCompany Description Sea Breeze manufactures and distributes premium beverages on tap in the Metro New York—New Jersey area. Since 1925, we have provided customized design, installation, and repair of bar guns and beverage dispensing systems to hospitality, educational, and healthcare facilities. We also manufacture a variety of chocolate syrups, pancake syrups, cocktail mixers, and other flavored syrups for retail distribution in the US and globally. Job Description Sea Breeze is seeking a hardworking, self-motivated Facility Maintenance Technician to perform general maintenance and repair tasks throughout our facility. This role is ideal for someone with strong mechanical aptitude, solid handyman skills, and the ability to work independently. There is an opportunity for growth within the position for the right individual. Key Responsibilities * Perform general building maintenance and repairs * Troubleshoot and repair basic plumbing issues * Perform minor electrical work and fixture repairs * Complete carpentry repairs and facility improvements * Perform painting and general upkeep projects * Perform Sanitation duties * Lubricate and maintain equipment as needed * Assist with preventative maintenance tasks * Maintain a clean and safe working environment Document maintenance work using a basic computer system Qualifications * Experience in maintenance * Strong mechanical aptitude * Basic skills in plumbing, electrical, carpentry, and painting Comfortable using hand and power tools * Ability to use a computer for basic documentation and communication Self-motivated with the ability to work independently Dependable with a strong work ethic Additional Information Schedule * Monday – Friday: 6:30 AM – 3:00 PM * Some Saturday overtime may be required * Flexibility to adjust work schedule when needed is an asset Compensation & Benefits * $25.00 per hour * Medical, Dental & Life Insurance (after 3 months) 100% employer-paid medical coverage Additional cost for spouse/child/family coverage All your information will be kept confidential according to EEO guidelines.

Job DescriptionCompany Description Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description We are looking for a Quotations Specialist - Gear to join our Warshauer Electric Supply team in Parsippany, NJ! Summary: Employee’s level and pay will be dependent on their level of experience, knowledge, and capabilities. The Quotations Specialist is responsible for establishing relationships with customers and vendors to secure pricing positions for bids. Responsible for reviewing bid packages, formulating project quotations, and providing product knowledge. What You'll Do: • Quote low to moderate profile/complex projects, • Review bid package and all the requirements surrounding the package including technical requirements, approved manufacturers list, commercial requirements, and documentation requirements, • Work closely with Outside Sales or the branch(es) to discuss the strategy and approach for each proposal request, • Format customer request into a standardized spreadsheet for bid review, • Break down bid package and issue Request for Quotation (RFQ) to vendors for project quotation levels while communicating deadline, project information, and any additional pertinent information available, • Receive pricing and put a bid tabulation together for review, • Prepare and submit final proposal with all required documentation, • May negotiate pricing with supplier and offer substitute products where appropriate, • Participate in product meetings, seminars, and training schools to enhance and maintain personal product knowledge, • Meet with the team to discuss vendor strategy and margin levels, • Establish and maintain relationships with customers and suppliers, • In addition to processing bids, increase business by utilizing company digital tools to sell, promote, or demonstrate product knowledge to new and existing customers Qualifications What You'll Need • 2+ years of customer service, project management, or related experience preferred, • Experience with electrical distribution, lighting, and controls, or adjacent industry preferred, • Ability to prioritize and manage multiple tasks and deadlines, • Strong organizational skills, • Product and application knowledge being developed, • Customer oriented and motivated with excellent communication, interpersonal skills, customer service, time management, and problem-solving skills, • Knowledge of computer skills, specifically with Excel/Outlook/Word, PDF editor (Blue Beam or Adobe) and appropriate quoting tools, • Ability to establish good relationships and credibility with all project stakeholders, • Ability to collaborate with sales team, customers, and vendors, • Must possess an entrepreneurial spirit and be self-motivated and enthusiastic about business, • Desire and aptitude to learn quickly with a growth mindset/self-improvement and continuous learning Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Constantly – at least 51%, • Walk: Must be able to move about inside/outside office or work location - Frequently – 21% to 50%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Occasionally – up to 20%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally – up to 20%, • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Occasionally – up to 20% Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Job DescriptionBenefits: • 401(k) matching Our company is a world leader in manufacturing fuses for the global market from Electronic Range fuses to High Voltage AC and DC fuses. Experience in the Electrical Power industry, with an understanding of circuit protection requirements a plus. Requirements/Responsibilities: Bachelor of Degree, Business or Project Management, and Electrical Engineering. Minimum of 5 years experience in Sales required. Minimum of 5 years' experience in Project Management. Experience in power electronics and power systems. Hands-on individual, capable of offering proposals, commercial and technical assistance to Engineers and Representatives. Attention to detail, with the ability to simplify complex issues, and relate technical explanations back to the commercial value of the product. Dynamic personality with excellent interpersonal, supervisory, and presentation skills. Must have stellar communication skills on multiple platforms, including verbal, written, face-to-face, and via telephone. Experience managing direct sales and manufacturers reps. • Excellent organizational skills and the ability to prioritize and manage multiple tasks with changing deadlines., • The ability to meet tight deadlines and follow projects through to completion., • Ability to conduct product, customer and market research., • Prepare and give technical presentation., • Analyze customers needs and propose technical solutions., • Must be willing to travel (light) within North America., • Well-rounded individual able to support our Field Sales force., • Bilingual (Spanish) a plus, but not a must.

Job Description JOB SUMMARY: The HR Generalist maintains and enhances the organization’s human resources by administering employee relations and human resources policies for all plant employees. ESSENTIAL DUTIES AND RESPONSIBILITIES: · Communicate and administer hourly and salaried HR policies, programs and procedures in accordance with state and federal law. · Be aware of employee concerns and problems, and the “pulse” of the organization. · Administer training programs. · Administer benefits: BCBS, MetLife (life, dental, and short-term disability), 401(K), and COBRA. · Actively work toward a safer organization and ensure compliance with all OSHA requirements. Direct safety program within the plant. · Maintain hourly and salaried employee records and files. · Ensure counseling and discipline are handled consistently. Ensure managers know how to administer counseling/discipline and maintain records. · Work with plant supervisors on the administration of performance evaluations. · Manage recruitment, interviewing, hiring and onboarding of new employees. · Oversee the handling of grievances filed by the union through the proper steps. · Interpret and administer union contract language consistently. · Act as a liaison between management and the union. · Prepare and process new employee paperwork. · Responsible for benefits orientation with new employees. · Administer plant absenteeism policy to include calculating monthly percentage. · Prepare the following reports: force, organizational chart, turnover, medical leave/light duty, and any other report requested. · Administer Uniform and Safety Shoe Program. · Collect and issue monthly activity reports and overtime cards. · Order all office supplies and maintain small inventory. KNOWLEDGE, SKILLS AND ABILITIES: · Basic knowledge of state and federal employment and labor laws. · Excellent communication and public speaking skills. · Must be knowledgeable in Excel, Word and Windows. · Ability to interact with all levels of management and plant personnel. EDUCATION AND WORK EXPERIENCE: · College degree · Three (3) to five (5) years of HR Generalist experience preferred · Experience in a labor union, manufacturing environment preferred Company DescriptionThe Okonite Company was founded in 1878, making it one of the original insulators of electrical wire and cable in the United States. Earliest customers included Samuel F.B. Morse for his telegraph network and Thomas A. Edison for the Pearl Street Generating Station, the nation's first, built in New York City in 1882. In June 1976, Okonite became the largest company in the United States to be owned by its employees through an Employees' Stock Ownership Trust. As such, Okonite employees have a unique vested interest in the quality and service we provide. Today, Okonite is headquartered in Ramsey NJ, approximately 30 miles northwest of New York City. At our six (6) manufacturing facilities, we make cables that range from 300V to 345kV insulated products that include Instrumentation, Power and Control, Medium Voltage, and High Voltage cables. Okonite serves a multitude of markets including Electric Utility (Distribution, Transmission, and Generation including fossil and nuclear), Oil & Gas (refineries and production platforms), Chemical, Military bases, Railroad, Transit and Pulp & Paper. In addition, we provide cables to various other industrial customers in areas of Hospitals, Colleges & Universities, Water Treatment Plants and Data Centers. With today's focus on renewable energy, Okonite cables can be found at Wind Farms, Solar Farms, and Biofuel generating facilities.The Okonite Company was founded in 1878, making it one of the original insulators of electrical wire and cable in the United States. Earliest customers included Samuel F.B. Morse for his telegraph network and Thomas A. Edison for the Pearl Street Generating Station, the nation's first, built in New York City in 1882. \r\n\r\nIn June 1976, Okonite became the largest company in the United States to be owned by its employees through an Employees' Stock Ownership Trust. As such, Okonite employees have a unique vested interest in the quality and service we provide. \r\n\r\nToday, Okonite is headquartered in Ramsey NJ, approximately 30 miles northwest of New York City. At our six (6) manufacturing facilities, we make cables that range from 300V to 345kV insulated products that include Instrumentation, Power and Control, Medium Voltage, and High Voltage cables. \r\n\r\nOkonite serves a multitude of markets including Electric Utility (Distribution, Transmission, and Generation including fossil and nuclear), Oil & Gas (refineries and production platforms), Chemical, Military bases, Railroad, Transit and Pulp & Paper. In addition, we provide cables to various other industrial customers in areas of Hospitals, Colleges & Universities, Water Treatment Plants and Data Centers. With today's focus on renewable energy, Okonite cables can be found at Wind Farms, Solar Farms, and Biofuel generating facilities.

Job DescriptionCompany Description Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description We are looking for an Outside Sales Representative to join our Warshauer Electric Supply team in Parsippany, NJ! Summary: The Outside Sales Representative is responsible for the sales and marketing efforts with the objective of increased profitable sales through creating, building, and maintaining high quality relationships with new and existing customers. Utilize company digital tools and company products and services to connect with consumers, develop creative solutions, generate sales volume, and provide the highest level of customer service. What You'll Do: • Responsible for selling, marketing, promoting, and demonstrating products. Effectively communicate the features and benefits of our product offering, • Increase business by generating sales to new customers and by selling additional products to existing customers, • Collaborate with leadership, team members, and suppliers in planning, tracking, and implementing sales strategies and developing new markets, • Assist customers with product selection and application utilizing knowledge, internal specialists, as well as supplier representatives, • Establish and maintain customer relationships, • Learn and evaluate customer operations to aid in identifying customer objectives, requirements, and preferences in order to present a unique solution to each customer tailored to their business objectives and needs, • Collaborate with customers and team members for product quotations and provide on-going communication throughout the customer's purchasing lifecycle, • Work with management, credit, and customers to resolve payment issues promptly, • Gather and report to management information regarding the company, competitors, pricing, products, and current and future market trends, • Actively participate in professional development to improve professional selling skills and maintain technical capabilities. Participate in company training/development, special promotions, sales meetings, supplier seminars, and training schools to enhance and maintain personal and product knowledge, • Maintain accurate and timely records including sales call schedules and expense reports, • Coordinate sales calls with vendors to introduce and demonstrate products, identify customer needs, and promote product and service solutions, • Utilize and champion digital tools, customer solutions and services to gain a competitive advantage Qualifications What You'll Need • 3+ years of sales or electrical industry experience, • Valid Driver’s License, • Ability to exhibit a positive, friendly, and helpful attitude with customers and to be sensitive to their needs, • Customer oriented and motivated with excellent communication, presentation, organization, and problem-solving skills, • Ability to prioritize and manage multiple tasks and deadlines, • Excellent negotiation skills, interpersonal skills, and ability to drive decisions with influence, • Product and application knowledge essential, • Highly self-motivated, • Familiar with Microsoft Office as well as relevant ERP systems and Customer Relation Management Tools (CRM) Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Frequently – 21% to 50%, • Walk: Must be able to move about inside/outside office or work location - Constantly – at least 51%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Occasionally – up to 20%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally – up to 20%, • Up to 10 pounds - Occasionally – up to 20%, • Up to 25 pounds - Occasionally – up to 20%, • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Occasionally – up to 20%, • Exposed to electrical hazards; risk of electrical shock - Occasionally – up to 20%, • Handles or works with potentially dangerous equipment - Occasionally – up to 20% Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Job Description Holiday Lighting Installation Technician Location: Northern NJ (Morristown–Montclair–Secaucus area) Company: Sparkle Squad of Morristown–Montclair–Secaucus About Us Sparkle Squad is Northern New Jersey’s trusted partner for spotless exteriors and dazzling holiday displays. We specialize in commercial and residential services including window cleaning, pressure washing, gutter cleaning, soft washing, and custom holiday lighting installations. Our team delivers high-quality work, unmatched safety, and outstanding customer service. Position Overview We are hiring experienced Holiday Lighting Installation Technicians to join our growing seasonal team. Technicians will be responsible for installing, maintaining, and removing premium holiday lighting displays for both residential and commercial properties. This role requires previous hands-on experience with professional holiday lighting installations. Key Responsibilities * Install, maintain, and remove holiday lighting, wreaths, garlands, and décor to Sparkle Squad’s quality and design standards. * Work safely and efficiently on ladders, roofs, and lifts for roofline, tree, and landscape lighting. * Read and execute lighting design plans, ensuring accuracy and attention to detail. * Troubleshoot lighting and electrical issues, including bulb replacement and power distribution. * Manage materials on-site, including lights, clips, cords, timers, and other equipment. * Provide professional and courteous service to customers, maintaining Sparkle Squad’s reputation for excellence. * Ensure strict compliance with all safety policies and procedures. Qualifications * Required: Prior professional holiday lighting installation experience. * Strong working knowledge of clips, cords, timers, roofline lighting, and tree wrapping techniques. * Comfortable working at heights and outdoors in seasonal weather. * Physically able to lift 50+ lbs and work on ladders and lifts. * Valid driver’s license and reliable transportation required. * Team player with strong work ethic and attention to detail. Schedule & Compensation * Seasonal: September–January (with opportunities for continued year-round employment in exterior cleaning services). * Flexible schedule; evenings and weekends as needed. * Competitive hourly pay based on experience with overtime opportunities. * Performance bonuses available for efficiency, safety, and season completion. Why Join Sparkle Squad? * Work with a professional, fast-growing brand. * Be part of large, high-profile lighting projects in Northern NJ. * Opportunities for advancement into year-round technician and crew lead roles. * Bring holiday cheer to families, communities, and commercial properties while earning great seasonal pay. Company DescriptionSparkle Squad of Morristown-Montclair-Secaucus is a fast-growing commercial and residential exterior cleaning company serving Northern New Jersey. We specialize in window cleaning, pressure washing, soft washing, gutter cleaning, and holiday lighting services—delivering cleaner, safer, better results to homes and businesses. Built on core values like honesty, customer service, discipline, growth, and teamwork, Sparkle Squad is committed to providing exceptional service while creating meaningful career opportunities for hardworking, motivated individuals.Sparkle Squad of Morristown-Montclair-Secaucus is a fast-growing commercial and residential exterior cleaning company serving Northern New Jersey. We specialize in window cleaning, pressure washing, soft washing, gutter cleaning, and holiday lighting services—delivering cleaner, safer, better results to homes and businesses. Built on core values like honesty, customer service, discipline, growth, and teamwork, Sparkle Squad is committed to providing exceptional service while creating meaningful career opportunities for hardworking, motivated individuals.

Job Description About CP Engineers With over 40 years of industry leadership, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our diverse portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Join a fast-growing team dedicated to technical excellence, client satisfaction, and professional growth. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn Best Places to Work in NJ awards for three years straight and have driven strong employee retention. Position Overview: CP Engineers is seeking a highly skilled Senior Electrical Engineer to provide technical leadership and mentorship within our electrical engineering team. This role is responsible for developing project scopes, preparing budget estimates, and overseeing electrical design work to ensure the delivery of high quality, accurate, and consistent engineering outputs across the organization. The Senior Electrical Engineer will review, sign, and seal electrical drawings and will also contribute hands on design support as required. Project work may include electrical and control systems for commercial and industrial buildings, water and wastewater pump stations, treatment facilities, and various municipal infrastructure projects. Technical & Design Responsibilities: • Lead electrical engineering design for power distribution, lighting, energy, communications, fire alarm, and control systems across commercial, industrial, municipal, and infrastructure projects., • Prepare and seal engineering drawings, specifications, load calculations, fault current analyses, and arc‑flash studies in accordance with state PE requirements., • Oversee electrical system modeling using industry-standard software (e.g., SKM, ETAP, EasyPower, or equivalent)., • Review and approve design documents produced by EITs, junior engineers, and CAD/BIM staff., • Ensure all plans comply with IBC, NEC, IEEE standards, NFPA codes, local building codes, and utility service requirements., • Assist with P&ID development, • Develop process control schematics, • Must have experience working with HVAC equipment, generators and ATS, switchgears, transformers, and fire alarm systems, • SCADA and PLC development and programming a plus, • Panel design experience a plus, • Serve as the electrical discipline lead on multi‑disciplinary project teams, coordinating closely with mechanical, structural, civil, and water resources groups., • Develop complete plan sets, technical specifications, and bid/construction documents., • Support construction-phase services: respond to RFIs, review submittals, conduct field inspections, issue punch lists, and prepare site visit reports., • Maintain compliance with firm-wide QA/QC procedures., • Review design deliverables for technical accuracy, constructability, and regulatory compliance., • Verify that designs meet safety, reliability, maintainability, and operational requirements., • Meet with clients to define project scope, requirements, and technical expectations., • Provide technical guidance, recommendations, and solutions during planning and project execution., • Support proposal writing, project budgeting, and electrical scope development., • Provide technical mentorship to junior electrical engineers, EITs, and designers., • Support staff development through training on codes, design standards, and best practices., • Oversee workload distribution, task assignments, and schedule adherence for electrical discipline tasks. Compensation: $115,000-$145,000 Requirements • Degree in Electrical Engineering or equivalent from an accredited university., • Maintain active Professional Engineer (PE) license in NJ (or ability to obtain via reciprocity)., • Minimum 7-10 years of electrical engineering experience, with a track record of leading, mentoring, or supervising other engineers., • Represent the firm at industry events, technical conferences, or professional association meetings as needed, • Excellent ability to review and critique designs and provide constructive guidance., • Strong verbal and written communication skills, high attention to detail, and the ability to work collaboratively in a team environment., • Understanding of construction processes and field coordination, with the ability to support field engineers when necessary., • A valid driver’s license and dependable transportation., • Flexible Work Options: Hybrid/remote work arrangements, • Work/Life Balance: Flexible hours, 20 days paid time off, • Financial Security: 401(k) with 4% company match, • Professional Growth: Tuition reimbursement, professional license and association fee coverage, • Comprehensive Health: Medical, dental, and vision insurance, • Supportive Culture: Commitment to employee well-being and career development

Job DescriptionThe RoleWe are looking for a Director of Procurement to own commercial relationships with equipment vendors, contractors, and other service providers across the supply chain for our renewable energy projects. This includes identifying vendors, negotiating preferred terms and prices, developing and implementing our procurement strategy, ensuring supply availability, and supporting engineering efforts to standardize designs of distributed energy systems. This role will report to the Chief Operations Officer and be based in the Northeast US or California. Key responsibilities include: • Define and implement the overall procurement strategy, strategic sourcing, and supplier selection, aimed at optimizing costs and operational efficiencies., • Develop Procurement policies, supplier selection procedures, and implementation of sourcing strategies, and conduct supplier selection processes to identify the best sourcing options., • Collaborate with Scale’s engineering team to understand technical requirements for equipment and other components, including battery energy storage, solar PV, generators and generator components, inverters, switchgear, and other balance of system components, • Work with Scale’s project delivery team to understand construction and engineering requirements for projects, and with Scale’s asset management team to understand third-party operations and maintenance service requirements, • Identify suppliers with conforming equipment specifications and/or capabilities, appropriate quality controls, and bankable performance history, • Negotiate terms and pricing with suppliers and drive procurement activities utilizing standard framework agreements to facilitate purchasing activities, • Develop and execute sourcing strategies to ensure continuity of supply while managing risks across the supply chain, • Work with engineering to standardize system designs, implementation, and operations, considering supply chain risks, costs, etc., • Guide internal teams to resolve cross-functional issues related to equipment, construction, and operations, • Track and analyze vendor performance, establish and maintain relevant KPI’s, monitor and manage relevant metrics, including spend analytics, operational efficiencies, supplier performance, warranty recovery, and benefit capture from procurement activities., • Identify and execute initiatives to increase procurement process efficiency & effectiveness, including implementation of procurement software solutions The ideal candidate:, • 10+ years of supply chain development and/or strategic sourcing experience, • Deep working knowledge of the renewable energy market and vendor landscape, pricing, terms, and trends, • Experience vetting vendors for quality and experience, • Comfortable presenting to and negotiating with local distributors as well as high-level executives, • Solid knowledge and demonstrated understanding of sourcing and/or purchasing leadership, vendor relations, procurement, sourcing, distribution, and tracking program savings and supplier service KPIs, • Ability to influence internal and external teams, with strong negotiation skills, • Excellent problem-solving skills with the ability to identify and manage risks, • Ability to communicate with diverse stakeholders, including engineering, on technical subject matters, • Background in mechanical, electrical, or industrial engineering is helpful. MBA is a plus

Job Description With over 40 years of industry leadership, CP Engineers delivers innovative solutions in site/civil, water/wastewater, municipal, MEP, and environmental engineering. Our diverse portfolio spans private, municipal, county, and regional clients—many of whom have partnered with us for decades. Join a fast-growing team dedicated to technical excellence, client satisfaction, and professional growth. Remote work flexibility, competitive compensation and benefits, and a supportive culture have helped CP earn Best Places to Work in NJ awards for three years straight and have driven strong employee retention. Position Overview: CP Engineers is seeking a highly skilled Senior Mechanical Engineer to provide technical leadership and mentorship within our mechanical engineering team. This role is responsible for developing project scopes, preparing budget estimates, and overseeing mechanical design work to ensure the delivery of high‑quality, accurate, and consistent engineering outputs across the organization. The Senior Mechanical Engineer will review, sign, and seal mechanical drawings and will also contribute hands‑on design support as required. Project work may include mechanical systems for commercial and industrial buildings, water and wastewater pump stations, treatment facilities, and various municipal infrastructure projects. Technical & Design Responsibilities: • Lead mechanical engineering design for HVAC, plumbing, and mechanical systems across commercial, industrial, municipal, and infrastructure projects., • Perform mechanical calculations, equipment selections, system sizing, and detailed technical analyses., • Prepare and seal engineering drawings, specifications, and reports in accordance with state PE requirements., • Conduct system modeling (e.g., energy modeling, load calculations) to optimize system performance., • Review and approve design documents prepared by junior engineers and CAD staff., • Ensure all designs meet applicable codes (IMC, IPC, NFPA, ASHRAE, OSHA, local/state regs)., • Process design experience a plus., • Serve as the mechanical discipline lead on multi‑disciplinary project teams, coordinating closely with electrical, structural, civil, and water resources groups., • Develop complete plan sets, technical specifications, and bid/construction documents., • Support construction-phase services: respond to RFIs, review submittals, conduct field inspections, issue punch lists, and prepare site visit reports., • Maintain compliance with firm-wide QA/QC procedures., • Review design deliverables for technical accuracy, constructability, and regulatory compliance., • Verify that designs meet safety, reliability, maintainability, and operational requirements., • Meet with clients to define project scope, requirements, and technical expectations., • Provide technical guidance, recommendations, and solutions during planning and project execution., • Support proposal writing, project budgeting, and mechanical scope development., • Provide technical mentorship to junior mechanical engineers, EITs, and designers., • Support staff development through training on codes, design standards, and best practices., • Oversee workload distribution, task assignments, and schedule adherence for mechanical discipline tasks. Compensation: $115,000-$145,000 Requirements • Degree in Mechanical Engineering or equivalent from an accredited university., • Maintain active Professional Engineer (PE) license in NJ (or ability to obtain via reciprocity)., • Minimum 7-10 years of mechanical engineering experience, with a track record of leading, mentoring, or supervising other engineers., • Represent the firm at industry events, technical conferences, or professional association meetings as needed, • Excellent ability to review and critique designs and provide constructive guidance., • Strong verbal and written communication skills, high attention to detail, and the ability to work collaboratively in a team environment., • Understanding of construction processes and field coordination, with the ability to support field engineers when necessary., • A valid driver’s license and dependable transportation., • Flexible Work Options: Hybrid/remote work arrangements, • Work/Life Balance: Flexible hours, 20 days paid time off, • Financial Security: 401(k) with 4% company match, • Professional Growth: Tuition reimbursement, professional license and association fee coverage, • Comprehensive Health: Medical, dental, and vision insurance, • Supportive Culture: Commitment to employee well-being and career development

Job DescriptionCompany Description Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description We are looking for a Warehouse Route Driver to join our Warshauer Electric Supply team in Parisppany, NJ! Summary: Employee’s level and pay will be dependent on their level of experience, knowledge, and capabilities. The Truck Driver - Combined is responsible for delivering products to/from customers, company branch/warehouse locations, and company suppliers in a delivery van or box truck (No CDL required). Responsible for ensuring that deliveries are prepared to meet customer requirements in the most efficient manner and materials are correct and free of damage. What You'll Do: • Inspect company vehicle for visual and operating defects; responsible for completing a daily inspection report, • Keep company vehicle clean, serviced, and maintained; alert supervisor of repair and/or service needed, • Must follow Department of Transportation (DOT), local and state driving laws and regulations, • Load or unload vehicle and ensure all material for each order is correct (quantity and type of material) and that material is free of damage before departure, • May assist in preparing orders for delivery, • Ensure all appropriate documentation is thoroughly completed at the time of delivery, including delivery receipt is signed by the customer, packing list and branch/warehouse manifest, • Pick up material returns from customers; responsible for inspecting the condition of the material and verifies quantities and catalog numbers, • Pick up material from company suppliers, • Senior Truck Driver will participate in the training of entry level Truck Drivers; and provides mentorship and coaching, • May be required to support other Warehouse duties such as preparing and filling orders and/or receiving, stocking, staging, and shipping material Qualifications What You'll Need • In lieu of experience, must attend company driver training, • Must have a valid driver’s license, • Must be at least 21 years of age, • Must pass a pre-employment and annual review of the Motor Vehicle Record, • Must obtain verification of non-expired medical certificate as required by law within 60 days of hire, • Must not have had a suspended driver's license for a traffic accident/violation within the past 3 years, • Ability to handle loads with a combine weight not to exceed 26,000 GVW, • Ability to handle basic issues and problems, • Strong knowledge of safety regulations and be familiar with traffic and driver laws, • Willingness to adhere to assigned routes, schedules, safety procedures, and transportation laws, • Excellent organizational and time management skills; ability to meet deadlines, • Excellent customer service skills, • Good attention to detail, • Ability to meet deadlines, • Ability to work overtime as needed Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Constantly – at least 51%, • Walk: Must be able to move about inside/outside office or work location - Occasionally – up to 20%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Occasionally – up to 20%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally – up to 20%, • Up to 10 pounds - Constantly – at least 51%, • Up to 25 pounds - Constantly – at least 51%, • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Occasionally – up to 20%, • Exposed to electrical hazards; risk of electrical shock - Occasionally – up to 20%, • Handles or works with potentially dangerous equipment - Frequently – 21% to 50% Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Job Description Commissioning Engineer - Wayne, NJ Our client is a Engineering Design and Commissioning Company that is a leader in the data center space. They provide design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, sustainable design and LEED expertise when providing these consulting services for Enterprise, Colocation, and Hyperscale Data Center Projects. This career-growth minded opportunity offers exciting projects with leading-edge technology and innovation as well as competitive salaries and benefits. Execute onsite commissioning plans, provide and gather specifications, and execute assignments in a multidisciplinary engineering Commissioning role for large facility projects. The commissioning experts adhere to a thorough quality management - QM /QA / QC process and procedures that validate and document our client's systems. Commissioning methodology covers a wide range of procedures to verify the integrity and performance of their customer's mission critical support infrastructure. Responsibilities: • Participate in daily commissioning activity meetings which services include:, • Equipment pre-start-up and start-up procedures; Development of standard operating procedures (SOP's) and Methods of Procedures (MOPs); Comprehensive Commissioning documentation, • Prepare commissioning test procedures and reports; Develop and maintain commissioning logs, equipment checklist, and other tools to track commissioning projects; Write comprehensive reports which include the following sections: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals, • Review design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to commissioning, • Integrated system testing; Load Bank Testing; Compilation of all testing procedure results, • Develop and administer functional tests for various systems, such as: electrical distribution systems, UPS, standby generators, etc., • System Assembly; Commission plan preparation ; Follow company QC process and procedures, • Help lead and manage any external resources; Schedule and direct periodic commissioning meetings; Attend construction and coordination meetings if required for the project ;, • Interface with clients, contractors, equipment vendors and owners agents as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, etc., • 2-5+ years experience with Data Center Commissioning, • Bachelor's / Associates Degree as an Electrical Engineer a plus, • Experience commissioning enterprise data centers, colos, and hyperscale companies, • A/E experience working in complex facilities or mission critical projects a big plus, • Previous Data Center / Mission Critical experience a must, • Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction), • Equipment testing experience in a Critical Facilities / facility environment, • Previous experience conducting Level 1-5 Commissioning, • Possess basic knowledge of systems design for various projects, • Possess basic knowledge of systems design for various projects, • Experience using Microsoft Word, Excel, and Microsoft Project After applying, if you have further questions, you may call 973-895-5200 and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Job DescriptionCoreWeave is The Essential Cloud for AI™. Built for pioneers by pioneers, CoreWeave delivers a platform of technology, tools, and teams that enables innovators to build and scale AI with confidence. Trusted by leading AI labs, startups, and global enterprises, CoreWeave combines superior infrastructure performance with deep technical expertise to accelerate breakthroughs and turn compute into capability. Founded in 2017, CoreWeave became a publicly traded company (Nasdaq: CRWV) in March 2025. Learn more at . What You'll Do: We are seeking a highly skilled and experienced Data Center Design Manager to lead and manage the design process on behalf of CoreWeave, overseeing the design of our Data Center Fit Outs (White Space) and ensuring that designs meet and incorporate CoreWeave project requirements. About the role: This role will primarily focus on managing the execution of Architectural, MEP, and LV/IT infrastructure designs within our leased data center facilities. The Design Manager will ensure that all designs align with our project requirements and are executed to meet performance, efficiency, and scalability standards. The role will also provide ongoing support into the Fit Out construction phase to ensure the design is implemented accurately. Acting as the primary point of contact for design-related matters, on a per-project basis, this individual will collaborate with internal teams and external consultants to ensure designs are executed consistently and to the highest quality standards. Up to 30% travel required to various data center sites. Who You Are: • Project Leadership & Oversight: Manage the design and coordination of multiple data center fit out projects concurrently. Oversee the work of Professional Consultants (Architects, Engineers) and Equipment Suppliers during the design process., • Single Point of Contact for Design on Assigned Projects: Act as the primary point of contact for all design-related items for assigned projects, coordinating closely with Data Center Providers and their Contractors, Architects/Engineers (A/E firms), along with our internal stakeholders to ensure seamless communication and alignment throughout the design process., • Internal Coordination with SMEs: Coordinate with internal Subject Matter Experts (SMEs) across various disciplines, including electrical, mechanical, and LV/IT, to ensure project requirements, technical specifications, and solutions are properly aligned, integrating specialized expertise into the design process as needed., • Standards & Compliance: Apply CoreWeave Design & Engineering Guidelines and industry best practices to ensure alignment with company objectives and emphasize value-engineering for optimal cost and performance., • Managing Basis of Design Deviations: Track and document any deviations from the Basis of Design throughout the project lifecycle, coordinating with internal teams and external consultants., • Budget & Schedule Coordination: Work with the Technical Project Management team to prepare, review, and monitor project schedules, budgets, and forecasts for design and construction expenditures., • OFCI Equipment Management: Review and evaluate OFCI (Owner-Furnished, Contractor-Installed) equipment submittals, providing recommendations to the Construction Management team and Procurement teams., • Design Reviews: Participate in page-turn meetings with consultants, providing feedback on designs, Sequence of Operations, Basis of Design documents, commissioning plans, and testing scripts., • Vendor Management: Assist with RFPs for A/E consultants, evaluation of proposals, selection of vendors, and oversight on alignment with project budgets and schedules, while reviewing/approving consultant invoices., • Executive & Project Reporting: Prepare and deliver detailed project reports to both executive leadership and project teams, track project budgets, schedules, scope objectives, and progress, ensuring alignment with CoreWeave's gating process and smooth handoff to the Construction Management team for ongoing management., • Stakeholder Communication: Provide regular project updates to internal and external stakeholders, both informally and formally., • Design Coordination & Site Visits: Conduct site visits during construction to review design implementation, assess construction progress, and ensure adherence to design specifications, quality standards, and project requirements., • Collaboration Across Teams: Collaborate closely with cross-functional teams, including Capacity, Network Engineering, Construction, Operations, Supply Chain and Technical Project Management to ensure alignment with business objectives and project deliverables. Serve as a liaison between internal teams and external consultants or vendors, ensuring clear and effective communication., • Innovation & Design Enhancement: Contribute to internal design team meetings, proposing and exploring new technologies or design concepts to enhance project outcomes. Stay up to date with industry trends and integrate innovative solutions into project designs. Required Skills: • Bachelor's degree in Engineering (Mechanical, Electrical, Network, Low Voltage/Cabling or related field), Architecture, or a related discipline., • 5+ years of experience in data center engineering or design with a proven track record of successfully completing data center design projects., • Strong knowledge of data center white space, including cooling systems, power distribution, network architecture, and LV/IT design., • Experience with large-scale, high-density data centers and cloud infrastructure, including familiarity with power, cooling, and other critical infrastructure systems., • Proven ability to manage complex projects with strong project management and organizational skills, ensuring successful project delivery on time and within budget., • Excellent communication skills, with the ability to effectively communicate technical concepts to both technical and non-technical stakeholders., • Ability to thrive in a fast-paced, dynamic environment, managing multiple projects and competing priorities while maintaining a high level of attention to detail., • Strong problem-solving and analytical skills, with a focus on developing efficient, cost-effective solutions to complex design challenges., • You love to develop innovative solutions to complex problems., • You're curious about new technologies or design concepts. At CoreWeave, we work hard, have fun, and move fast! We're in an exciting stage of hyper-growth that you will not want to miss out on. We're not afraid of a little chaos, and we're constantly learning. Our team cares deeply about how we build our product and how we work together, which is represented through our core values: • Be Curious at Your Core, • Act Like an Owner, • Empower Employees, • Deliver Best-in-Class Client Experiences The base salary range for this role is $122,000 to $200,000. The starting salary will be determined by job-related knowledge, skills, experience, and the market location. We strive for both market alignment and internal equity when determining compensation. In addition to base salary, our total rewards package includes a discretionary bonus, equity awards, and a comprehensive benefits program (all based on eligibility). What We Offer The range we've posted represents the typical compensation range for this role. To determine actual compensation, we review the market rate for each candidate which can include a variety of factors. These include qualifications, experience, interview performance, and location. In addition to a competitive salary, we offer a variety of benefits to support your needs, including: • Medical, dental, and vision insurance - 100% paid for by CoreWeave, • Company-paid Life Insurance, • Voluntary supplemental life insurance, • Short and long-term disability insurance, • Flexible Spending Account, • Health Savings Account, • Tuition Reimbursement, • Ability to Participate in Employee Stock Purchase Program (ESPP), • Mental Wellness Benefits through Spring Health, • Family-Forming support provided by Carrot, • Paid Parental Leave, • Flexible, full-service childcare support with Kinside, • 401(k) with a generous employer match, • Flexible PTO, • Catered lunch each day in our office and data center locations, • A casual work environment While we prioritize a hybrid work environment, remote work may be considered for candidates located more than 30 miles from an office, based on role requirements for specialized skill sets. New hires will be invited to attend onboarding at one of our hubs within their first month. Teams also gather quarterly to support collaboration. California Consumer Privacy Act - California applicants only CoreWeave is an equal opportunity employer, committed to fostering an inclusive and supportive workplace. All qualified applicants and candidates will receive consideration for employment without regard to race, color, religion, sex, disability, age, sexual orientation, gender identity, national origin, veteran status, or genetic information. As part of this commitment and consistent with the Americans with Disabilities Act (ADA), CoreWeave will ensure that qualified applicants and candidates with disabilities are provided reasonable accommodations for the hiring process, unless such accommodation would cause an undue hardship. If reasonable accommodation is needed, please contact: . Export Control Compliance This position requires access to export controlled information. To conform to U.S. Government export regulations applicable to that information, applicant must either be (A) a U.S. person, defined as a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident (green card holder), (iii) refugee under 8 U.S.C. § 1157, or (iv) asylee under 8 U.S.C. § 1158, (B) eligible to access the export controlled information without a required export authorization, or (C) eligible and reasonably likely to obtain the required export authorization from the applicable U.S. government agency. CoreWeave may, for legitimate business reasons, decline to pursue any export licensing process.

Job Description Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufacturers of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Summary of Responsibility: A Field Service Technician is a key member of the Customer Support Department and is primarily responsible for the installation, preventive maintenance, solving and repair of Computer Numerically Controlled (CNC) Lathe, Milling and Multi-Functional Machining Centers. We are seeking customer focused professionals who have a positive attitude, a high interest in learning and great Customer service skills. This opportunity is an above average platform for technical advancement and compensation growth. What You Will Contribute: The CNC Field Service Technician must have or be willing to learn through training on the job and classroom an understanding of mechanical drawings, electrical/pneumatic/hydraulic schematics, PLC ladder diagrams and testing equipment required to effectively diagnose and resolve issues with electrical/mechanical components, as well as electro-mechanical and machine control systems. * Daily travel from home to Customer facilities with occasional overnight hotel stays required when servicing remote Customer locations within the designated coverage territory or when participating in remote training programs. * Demonstrating a willingness to help others and be a team member * Install, commission, calibrate, maintain, tackle, diagnose, and repair CNC equipment and accessory CNC equipment at customer facilities. Service calls also include operator training, networking between systems, software applications, preventive maintenance, major assembly replacements and alignments, overhauls/refurbishments, upgrades/retrofits, and un-installation services. * Provide a direct communication link between the Customer and the Service Group of the Robert E. Morris Company. * Provide voice of Customer feedback. * Through service and Customer relationships, build brand dedication. * Conduct travel and work in a safe manner, constantly learning new technology and soft skills. * Apply machine tool manuals, technical documents, as well as internal and external authorities to optimally diagnose and resolve CNC equipment issues. * Effectively understand and use the Salesforce Lightning Customer Support computer system. Qualifications & Competencies: * Proficient verbal and written communication and Customer relation skills. * Able to interact and effectively communicate in person and over the phone with customer and co-workers. * Present a professional image. * Must be adaptable to changes and able to deal with change, delays, or general work-related issues. * Basic digital literacy and shown understanding of MS Word, Excel, and Outlook. * Must have, and/or be willing/capable of being trained to develop, electro-mechanical skills (motors, drives, transformers etc.). * Knowledge of machine tool manufacture, installation, operation, maintenance & repair and/or a broad shop background – is a plus. * Basic mechanical and logical solving skills are a must. * Rational decision making and problem-solving skills. Work Environment * Exposure to manufacturing/machining environments which may present possible hazards such as noise, electricity, chemicals, heavy equipment, and other automated or manual machinery. General office and training environment experienced at the Robert E. Morris Company. Other Functions: * Perform related duties as required The duties listed above are intended only as illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. What’s in it for You: * We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: Competitive starting salary * Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance * 3+ Weeks’ Vacation to Start * 10 Company Paid Holidays * 401(k) retirement plan with company contribution Tuition reimbursement * Employee appreciation events and perks Employee Assistance Program Mental and Physical Requirements: The physical demands and characteristics of the work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Must be highly mobile, able to access all areas of the premises. * Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. * Ability to sit for prolonged period of times. * Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. * Ability to frequently use hands and arms. * Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. * Ability to work responsibly and professionally in dynamic job sites that may involve tight timelines, changing priorities, and interaction with customers and team members. Certain positions are designated as safety-sensitive due to the nature of the work performed. Employees in these roles may also be expected to: * Ability to stand, walk, bend, kneel, crouch, climb, and reach for extended periods while servicing equipment. * Ability to work in tight spaces or awkward positions, including accessing equipment interiors and elevated areas. * Strong hand–eye coordination and fine motor skills required for precise electrical, mechanical, and diagnostic work. * Ability to work in industrial environments, with exposure to noise, lubricants, coolants, metal chips, and other manufacturing conditions, while consistently wearing required personal protective equipment (PPE). Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #: 1439B, Wayne NJ

Job Description Preconstruction Project Manager (Commercial Solar) Location: Hawthorne, NJ About the Role: We are seeking a Preconstruction Project Manager with experience in C&I distributed generation solar EPCs to support our expanding portfolio of commercial renewable energy projects. The Preconstruction Project Manager (Precon PM) is responsible for managing the full preconstruction lifecycle. This position requires strong technical understanding of solar PV systems, excellent communication skills, and the ability to coordinate cross-functionally with Engineering, Construction, Procurement, and Finance. The Precon PM reports to the Director of Preconstruction and must be located near Hawthorne, NJ with hybrid flexibility and travel to job sites as needed. Key Responsibilities: RFP Management & Technical Review • Review and interpret drawings, specifications, geotechnical reports, surveys, and contract documents., • Develop a comprehensive understanding of project scope, contract requirements, risks, and deliverables., • Lead the full preconstruction lifecycle: kickoff, Q&A, clarifications, addenda review, and submission coordination., • Perform detailed quantity takeoffs, material counts, and system component validations., • Collaborate with Estimating to validate scope, phasing, and manpower projections., • Develop complete and normalized bid comparisons (bid-leveling) and perform subcontractor/vender descopes., • Build and maintain cost databases, benchmarking tools, and historical cost libraries., • Collaborate closely with Engineering and Procurement to analyze multiple design options and provide value-engineering recommendations (racking, modules, inverters, electrical topology, structural considerations, etc.) based on codes, AHJ requirements, equipment availability, and constructability., • Manage the entire subcontractor RFP process, including distribution of bid packages, NDAs, clarifications, evaluations, and award recommendations., • Prequalify subcontractors and maintain updated capability, cost, and performance records., • Coordinate with racking vendors and geotechnical/pull-testing providers to obtain required data prior to bid., • Coordinate with utilities to evaluate interconnection requirements, timeline, fees, and scope impacts., • Research permitting requirements, zoning constraints, and local code amendments for each jurisdiction., • Engage with AHJs to understand inspection sequences, fire code constraints, and design requirements affecting project cost., • Develop preliminary construction schedules in partnership with Engineering, Construction, and Project Management., • Identify permitting, interconnection, structural, geotechnical, supply-chain, and schedule-driven risks., • Create bid-level risk logs and mitigation plans., • Prepare early project budgets and establish financial control frameworks., • Set up preconstruction documentation in Procore, including bid packages, submittal logs, and scope definitions., • Lead internal page-turn and handoff meetings to ensure smooth transition from estimating to execution teams., • Lead lessons-learned sessions post-project and drive implementation of recommendations., • Review actual cost data from completed projects to refine estimating accuracy., • Track subcontractor field performance feedback and incorporate into future bid strategies., • Identify process inefficiencies and propose creative, practical solutions to improve organizational performance., • 3+ years of preconstruction, estimating, or project management experience at a Solar EPC (C&I DG preferred)., • Experience with subcontractor tendering, bid-leveling, and contract negotiation is required., • Experience developing or reviewing solar PV designs (electrical, structural, civil) is strongly preferred., • Bachelor’s degree in Construction Management, Engineering, or related field preferred., • Strong proficiency in Microsoft Excel (advanced functions), MS Office, and MS OneNote preferred., • Experience with Procore, Bluebeam, Smartsheet required., • Ability to prioritize and manage multiple concurrent deadlines., • Strong organizational, data-entry, and project management skills., • Clear written and verbal communication with strong technical documentation skills., • Exceptional note-taking, retention, and follow-through abilities., • Analytical mindset with strong mathematical and problem-solving skills., • Understanding of NEC solar PV requirements (Articles 690, 705, etc.) preferred., • Ability to perform basic structural and electrical design reviews., • Natural curiosity, ownership mentality, and a drive for continuous improvement., • Competitive Salary, • Performance-Based Bonuses, • Employee Referral Bonuses, • Matching 401(k), • Health, Dental, and Vision Insurance, • Health Reimbursement Account, • Life, AD&D, Accident, Disability, and Critical Illness Insurance, • Paid Time Off and Paid Holidays, • Employee Discount Program, • Paid Time Off and Paid Holidays Applicants must be authorized to work in the United States without the need for current or future employment sponsorship. Pfister Energy, Inc. is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace where all individuals feel valued and respected. We do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other legally protected status. Company DescriptionPfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law.Pfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals.\r\n\r\nWe are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law.