Electrical distribution jobs in Carteret, New JerseyCreate job alerts

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Operate utility construction equipment to dig and backfill excavations for installation, operation, maintenance and repair of water and wastewater utility facilities. Installs, maintains, repairs and operates water and wastewater utility facilities and grounds by performing responsibilities assigned. Primary Duties/Responsibilities: • Perform routine and preventative maintenance on excavation equipment and forklift, and maintain accurate records of such activities., • Install new or replacement water and wastewater system mains, services, meters, and fire hydrants with all associated appurtenances., • Repair, maintain and/or operate the wastewater collection system, water transmission and distribution system facilities, pump stations, bar screens, buildings, grounds, and associated equipment, i.e., mains services, meters, fire hydrants, valves, etc., • Use and maintain all work equipment in accordance with manufacturer’s recommendations, i.e. jack hammer, air compressor with related tools, tapping machines, portable ditch pumps and electrical generators, pipe locating and leak detection equipment, hand tools, etc., • Knows and abides by company’s safety policy and procedures., • Provides excellent customer service to all external and internal customers., • Use accepted practices and methods of water and wastewater facilities and appurtenances installation or replacement and their proper operation, maintenance and repair., • Perform excavations and restorations related to operation, maintenance and repair of water distribution and wastewater collection system., • Perform hydrant and blow-off flushing, flow tests, leak surveys, and water line locating functions., • Keep accurate daily records of work performed, time worked and materials used., • Ability to work in inclement weather conditions.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Basic computer skills and knowledge of MS Office Suite., • Ability to communicate effectively both orally and in writing., • Good mathematical skills, including ability to calculate volumes and pressures., • Ability to read and interpret maps., • Ability to understand policies and procedures relating to utility 1 duties., • Ability to drive to job site, walk for extended periods on flat and uneven terrain, climb bend and stoop., • Ability to lift 50 lbs. and on occasion up to 100 lbs. Additional Information Pay Range: $26.50 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description The Electrical Warehouse Manager oversees all operations within the electrical warehouse, ensuring efficient receipt, storage, inventory management, and distribution of electrical supplies, equipment, and materials. This role requires strong organizational skills, technical understanding of electrical products, and leadership to manage staff and maintain safety and compliance standards. MUST HAVE ELECTRICAL WAREHOUSE MANAGER EXPERIENCE!!! Key Responsibilities Warehouse Operations * Manage daily warehouse activities including receiving, storing, picking, packing, and dispatching of electrical materials and equipment. * Ensure all inventory transactions are accurately recorded in the warehouse management system (WMS). * Implement and maintain efficient layout and storage systems to optimize space and workflow. * Oversee stock control and conduct regular cycle counts and full inventory audits. • Proficiency in warehouse management systems (WMS) and ERP software., • Strong leadership, communication, and organizational skills., • Forklift certification (preferred)., • Ability to lift and move heavy items and operate warehouse equipment safely.

Job Description Job Posting: Electrical Estimator About Your Opportunity: The Electrical Estimator is responsible for preparing accurate and competitive estimates for electrical scopes of work on a wide range of projects, including commercial, healthcare, senior living, education, and industrial facilities. This role will collaborate with the preconstruction and project management teams to ensure timely, complete, and cost-effective estimates that align with Wohlsen’s standards of excellence.Responsibilities * Prepare detailed quantity take-offs, cost analyses, and estimates for electrical systems (power distribution, lighting, low-voltage, fire alarm, etc.) across various project types. * Review design documents, specifications, and drawings to determine electrical scope requirements. * Solicit and analyze subcontractor and supplier pricing, ensuring coverage of all electrical components. * Identify value engineering opportunities and evaluate alternative design solutions to optimize project costs. * Collaborate with preconstruction, MEP, and operations teams during budgeting, bidding, and project award phases. * Assist in the development of conceptual estimates and early-phase budgeting for clients. * Stay up to date on market trends, material pricing, and labor productivity to ensure accurate forecasting. * Participate in client presentations, proposal development, and project interviews when needed. * Maintain organized records of historical costs and completed estimates to support future projects. Qualifications: • Bachelor’s Degree required, preferably in Mechanical or Electrical Engineering, Construction Technology, Architecture, or a related field., • 3-10 years of construction experience with a solid understanding of construction management, architecture, or engineering., • Knowledge of MEP systems and controls, including various HVAC, plumbing, fire protection, and electrical systems., • Working knowledge of building codes, • Ability to read and understand MEP drawings and specifications., • Valid driver’s license and transportation for remote offices and job sitesSalary Range: $70k-$90k annually, depending on experience and qualifications Benefits: Comprehensive benefits package including health insurance, retirement plan, paid time off, and 100% ESOP! If you are a dynamic individual seeking a challenging role in MEP estimation with a company committed to excellence, we encourage you to apply! It is the policy of Wohlsen Construction to provide equal employment opportunities without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, gender, gender identity, genetic information, pregnancy or any other protected characteristic under applicable law. This policy relates to all phases of employment, including, but not limited to, recruiting, employment, placement, promotion, transfer, demotion, reduction of workforce and termination, rates of pay or other forms of compensation, selection for training, the use of all facilities, and participation in all company-sponsored employee activities. *Note to Recruiters, Placement Agencies, and Similar Organizations: Wohlsen does not accept unsolicited resumes from agencies. Please do not forward unsolicited agency resumes to our website, locations, or to any Wohlsen team member. Wohlsen will not pay fees to any third-party agency or firm and will not be responsible for any agency fees associated with unsolicited resumes. Unsolicited resumes received will be considered property of Wohlsen and will be processed accordingly. Powered by JazzHR u5BSc4NpvA

Job Description URGENTLY HIRING Electro Mechanical Maintenance Technician (All Shifts Available!) Send your resume to jpiacquadio @ aerotek.com for the fastest response! Pay: $36 - $39 per hour Shifts: 1st, 2nd, and 3rd (apply for shift times) Location: New Brunswick, NJ Responsibilities • Troubleshoot and repair processing and packaging equipment., • Perform routine preventive maintenance and maintain proper documentation., • Read and interpret electrical schematics and wiring diagrams., • Troubleshoot and repair control panels, motors, and power distribution systems., • Work with conveyors, gearboxes, pumps, and automated packaging equipment., • Perform mechanical alignments, bearing replacements, and belt tensioning., • Calibrate temperature sensors, flow meters, and pressure gauges., • Use multimeters, oscilloscopes, and other diagnostic tools., • Follow SOPs and maintain clean, safe workspaces., • Experience in industrial maintenance or electro-mechanics., • Strong knowledge of PLCs, VFDs, and industrial controls., • Ability to troubleshoot and work independently under pressure., • Familiarity with CMMS systems and Microsoft Office., • Electrical systems knowledge and ability to read electrical schematics., • Associate’s degree or technical certification in electromechanical technology, electrical engineering, or industrial maintenance., • High school diploma with extensive hands-on experience is acceptable for some roles., • Experience in a manufacturing or food production environment., • Prior work with automated or robotic systems is a plus. Join a fast-paced, team-oriented environment with a global impact. We offer a competitive hourly rate with a sign-on bonus, along with comprehensive benefits including medical, dental, vision, life insurance, 401(k), FSA, and STD/LTD. Enjoy paid time off and career development opportunities. Job Type & Location This is a Contract to Hire position based out of Westfield, NJ. Pay and Benefits The pay range for this position is $36.00 - $39.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Westfield,NJ. Application Deadline This position is anticipated to close on Dec 19, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! Turtle is recruiting for a Credit Manager. This position will have an in office presence 3-4 days per week. There is some opportunity for travel. The Credit Manager, while working independently, will support sales and profitability initiatives through the extension of customer credit and management of accounts receivable portfolios. The successful candidate will possess a thorough knowledge of finance and accounting procedures and have the ability to handle challenging situations. Essential Functions: • Evaluate creditworthiness of new and existing customers, authorize and monitor customer credit limits, and credit-approve sales orders in accordance with delegated limits of authority and overall Company credit policies., • Manage the accounts receivable portfolio of assigned profit center(s) through timely collection, follow-up with customers, resolution of disputes, and enhancement of cash flow within established days sales outstanding (DSO) and delinquency guidelines., • Establish and maintain customer relationships in support of both sales and credit management initiatives., • Coordinate with legal department or collection agencies as necessary, on asset recovery strategies and tactics., • Assist sales management in the review and negotiation of contract and purchase order terms and conditions., • Protect and enhance sales profitability through the administration of appropriate cash discount and service charge programs., • Establish and maintain procedures to maximize secondary job protection (Mechanic’s Liens, Payment Bonds, etc.)., • Keep leadership and sales management team informed on matters related to customer accounts and credit trends., • Bachelors of Science in Finance or Accounting is preferred, or 10 plus years of relevant experience, • 8 -10 years of credit department experience, • Experience in the electrical distribution market, • Working knowledge of liens and bonds and commercial legal principles, • Must be effective in working with customers, suppliers and support team, • Must be an effective verbal and written communicator with excellent negotiation skills, • High attention to detail and excellent analytical skills, • Sound independent judgment and decision making skills We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job DescriptionBenefits: • Dental insurance, • Health insurance Must have: Blue seal refrigeration toxic 2-x license and black seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. seeks a highly motivated and results-oriented Electrical Engineering Manager is responsible for overseeing and managing the compliance, development, and implementation of engineering standards, specifically focusing on UL (Underwriters Laboratories) testing and manufacturer test requirements. This role involves ensuring that products meet all necessary safety, regulatory, and industry standards, particularly for electrical and mechanical systems. The manager will work closely with engineering teams, product development, and quality assurance to guide the organization in meeting UL standards and regulatory requirements, ensuring products are certified and safe for use in the market. It is a full-time, exempt position, and the candidate will report directly to the Director of Engineering. Working Conditions: Office Environment What We Offer: • Competitive Salary: Paid on a weekly basis., • Comprehensive Benefits Package, Including Health, Dental, and Vision Plans., • Retirement Plan: 401(k), • Paid Time Off (PTO): For vacation and personal days. · · Oversee the development and implementation of engineering related to UL and manufacturer test requirements (MTR) for electrical and mechanical products. · Ensure all products are compliant with UL standards (e.g., UL 508A, UL 60947) and other regulatory standards applicable to the industry. · Work closely with internal and external stakeholders to stay updated on UL changes, revisions, and new industry standards. · Lead efforts in coordinating product testing and certification with UL or other regulatory bodies to ensure compliance with industry standards. · Manage and track testing schedules and product submissions for UL approvals. · Act as the primary point of contact for testing agencies, ensuring efficient and accurate communication regarding testing and certification requirements. · Collaborate with engineering and product development teams to integrate UL and manufacturer test requirements into the product design phase. · Provide technical guidance and expertise to engineering teams to ensure designs meet all applicable UL standards. · Assist in troubleshooting and resolving issues that arise during testing or certification processes. · Conduct regular audits of product designs, processes, and manufacturing practices to ensure continuous compliance with UL and other regulatory requirements. · Prepare and manage internal and external inspections, ensuring that all products meet safety standards and regulatory guidelines. · Ensure that all documentation related to UL testing, compliance, and certifications is complete, accurate, and maintained for audit purposes. · Work closely with the Quality Assurance, R&D, and Manufacturing teams to ensure product quality and safety across all stages of the product lifecycle. · Educate and train engineering teams on UL MTR requirements and the importance of compliance in the product development process. · Collaborate with the legal and regulatory affairs departments to stay informed about industry regulations and compliance changes. · Monitor industry trends and emerging technologies to ensure the company’s products stay ahead of regulatory changes and market demands. · Identify opportunities to improve internal processes, enhance product safety, and streamline certification procedures. · Implement corrective and preventive actions when issues related to compliance, testing, or certification arise. Requirements: Skills, Requirements, and Specifications · • 10+ years of experience in Electrical engineering, focusing on switchboards, switchgear, or electrical equipment., • 4+ years in a leadership or managerial role, • 4+ years of experience in engineering standards management, UL testing, and product compliance, particularly in the electrical or mechanical industries., • Experience with product safety and regulatory certifications (e.g., UL 508A, UL 60947, IEC)., • Proven track record of working with testing agencies and managing certification processes., • In-depth knowledge of UL standards, testing procedures, and other industry standards such as IEC, ANSI, and NEC., • Strong understanding of electrical and mechanical system design principles and how they relate to safety standards., • Excellent project management, organizational, and documentation skills., • Strong communication and interpersonal skills, with the ability to collaborate with cross-functional teams and external agencies., • Ability to interpret complex technical documentation and standards and translate that into actionable requirements. Experience with CAD tools, product design, and development., • Knowledge of risk assessment techniques and compliance risk management., • Familiarity with ISO standards and other international regulatory requirements., • Experience with electrical product testing (e.g., electrical enclosures, switchgear) and mechanical safety standards., • Primarily office-based with occasional visits to manufacturing facilities and testing laboratories., • Involves regular interaction with engineering teams, product managers, external testing agencies, and regulatory bodies., • May require occasional travel for product testing, certification activities, and industry conferences. Education: • Bachelor or Masters Electrical Engineering Degree, • Professional Engineer (PE) certification is an advantage.

Job DescriptionDescription: Primary duties include warehouse support by assisting in preparing goods for packaging, warehousing and distribution. Hours are Mon-Fri, 9:00AM-5:30PM (some flexibility required, occasional Saturdays). What We Offer: • Competitive starting salary, • Major Medical/Dental/Vision, • 401k Company Match, • Paid time off & Holiday Pay, • Company paid life insurance, • Company paid long term disability, • Uniforms and yearly work boot allowance Responsibilities: Include but are not limited to the following. The Company reserves the right to add to, delete, change, or modify the essential duties and responsibilities at any time. All work is to be completed with minimum supervision and in accordance with Company standards. Other duties may be assigned. • Receive and stock product (bulk and package); repackaging., • Perform tank readings, customer pick-ups, LTL shipments., • Restock warehouse/driver supplies., • Loads, fills and labels drums, kegs, pails and other containers from bulk according to assignment in an efficient and accurate manner., • Places containers on pallets for transport or stock., • Picks and stages products to be loaded in delivery trucks according to the delivery schedule., • Loads and properly secures products in delivery trucks according to manifest on a daily basis., • Unloads delivery trucks in an efficient manner and stores products in appropriate area., • Completes and submits accurate records of products received and/or filled on a daily basis., • Updates products that are loaded on all trucks and utilizes the load/unload slips., • Retrieves and submits packing slips for products received in a timely fashion., • Operates forklift, hand truck, pallet and electric jack as needed., • Assists in tracking returned drum inventory., • Maintains warehouse area in a clean, orderly and safe manner and reports any corrective or preventive maintenance issues; fire extinguisher checks., • Completes accurate inventory of products as needed., • Adheres to all company policies and procedures paying special attention to health and/or safety procedures., • Maintains a flexible work schedule to include irregular hours, weekend and holidays., • Must pass a pre-employment physical and drug., • Interacts positively with customers in all segments of Moove business. To perform the job successfully, an individual should demonstrate the following competencies: • Basic math skills including: addition, subtraction, multiplication and division., • Excellent interpersonal, communication and customer service skills., • Ability to read road maps. Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Must be able to perform with minimal or no supervision. High school diploma or general education degree (GED); or less than one year related experience or training; or equivalent combination of education and experience. Certificates and Licenses: Valid driver's license may be required based on facility, a CDL is a plus. Language Ability: Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to effectively present information and respond to questions from groups or managers, clients, customers, and the general public. Math Ability: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Computer Skills: Experience working in an ERP environment is desirable. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts. The employee is occasionally exposed to work in high, precarious places and risk of electrical shock. The noise level in the work environment is usually noisy. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stand; walk and reach with hands and arms. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. EOE

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. seeks a highly motivated and results-oriented Mechanical Engineer to join our growing team. In this role, you will play a pivotal role in developing and innovating our low-voltage switchboard products. It is a full-time, exempt position, and the candidate will report directly to the Engineering Group Leader. Working Conditions: Office Environment What We Offer: • Competitive Salary: Paid on a weekly basis., • Comprehensive Benefits Package, Including Health, Dental, and Vision Plans., • Retirement Plan: 401(k), • Paid Time Off (PTO): For vacation and personal days., • Develop comprehensive mechanical designs for switchboard enclosures, busbars, and structural components, utilizing advanced CAD software to create detailed 2D and 3D models., • Select appropriate materials and manufacturing processes for all components, considering cost-effectiveness, performance requirements, and industry best practices., • Employ simulation and analysis tools to optimize designs for superior performance, reliability, and thermal management., • Lead the mechanical design process to strictly comply with relevant industry standards and regulations (ANSI, IEEE, IEC, local codes)., • Ensure that switchboard design complies with relevant design practices, electrical codes, and safety standards such as UL891, UL67, UL508A, UL50, the National Electric Code (NEC), the New York City Electric Code (NYCEC), ANSI, IEEE, IEC, the Utility Standard, and local regulations., • National Electrical Code (NEC 2008-2020), NYNEC, UL 891, UL67, UL 50, UL 508a in product development, • Stay abreast of emerging standards, innovative materials, and cutting-edge design methodologies., • Collaborate closely with electrical engineers, design teams, and project managers to achieve project objectives seamlessly., • Verify switchboard designs meet stringent mechanical performance and safety standards (e.g., UL, NEC)., • Investigate and resolve any mechanical quality issues or non-conformities identified during production or in the field., • Generate comprehensive engineering documentation, including detailed mechanical specifications, bills of materials (BOMs), and user-friendly technical manuals., • Maintain accurate records of all design changes, revisions, and updates., • Actively monitor project budgets and identify cost-saving opportunities through design optimization without compromising quality or safety., • Provide technical support for maintenance and repair activities on deployed switchboard products., • Assist in troubleshooting and resolving mechanical issues that may arise in the field. Requirements: Skills, Requirements, and Specifications • Bachelor's degree in Mechanical Engineering (Master's degree a plus)., • Experience in sheet metal and fabrication design., • Proven experience in switchboard design., • Familiarity with major brands in the industry (Schneider, ABB, Eaton), • Proficiency in advanced CAD software or mechanical design AutoCAD, Autodesk Inventor., • In-depth understanding of mechanical standards., • Excellent communication, collaboration, and teamwork skills., • Ability to thrive in a fast-paced, results-oriented environment.

Job Description Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role The National Projects Manager will oversee and manage project managers as well as dedicated projects from inception to completion. The ideal candidate will have a strong background in management, project management, excellent leadership skills, and the ability to coordinate with various stakeholders to ensure projects are completed on time, within scope, and within budget. What You'll Do: • Defined the tools, processes, and technology needed to perform consistent project management execution across all Turtle’s National Solutions Group as well as each Branch., • Build operations, metrics, and strategies while deepening team knowledge of all processes and procedures., • Partner with cross-functional leaders to examine operations, uncover gaps, and ensure alignment between compliant processes and procedures., • Ensure consistent execution and training across all programs, develop tools to facilitate rapid onboarding of new employees developing them quickly to high levels of productivity., • Develop detailed project plans and timelines, ensuring all project goals are met., • Coordinate internal resources and third parties/vendors for the flawless execution of projects., • Ensure that all projects are delivered on time, within scope, and within budget., • Develop project scopes and objectives, involving all relevant stakeholders and ensuring technical feasibility., • Allocate resources efficiently and manage project budgets., • Monitor project progress and adjust as necessary to ensure projects are completed on time and within budget., • Perform risk management to minimize project risks., • Prepare and maintain accurate project documentation, including project plans, budgets, and reports., • Conduct regular project meetings and provide updates to stakeholders., • Ensure compliance with industry standards and regulations in all project activities., • Bachelor’s degree in business administration, Engineering, or a related field., • Minimum of 3-5 years of experience in project management., • Strong knowledge of project management methodologies and tools., • Excellent communication and leadership abilities., • Ability to manage multiple projects simultaneously., • Proficiency in project management software., • Strong problem-solving skills. We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job DescriptionBenefits: • Dental insurance, • Health insurance Position Overview A fast-paced, refrigerated food manufacturing and distribution facility is seeking an experienced Maintenance Supervisor to lead its maintenance team. This role is responsible for overseeing daily mechanical and electrical maintenance activities, ensuring minimal production downtime, and driving a culture of safety, preventive maintenance, and continuous improvement. Key Responsibilities • Supervise a team of maintenance technicians across multiple shifts, providing direction, training, and performance feedback, • Lead mechanical troubleshooting, repair, and preventive maintenance activities on conveyor systems, motors, gearboxes, pneumatics, VFDs, photoeyes, sensors, and other production equipment, • Coordinate and prioritize work orders to minimize production downtime and meet operational goals, • Oversee electrical diagnostics, including wiring, control panels, PLCs, and 3-phase systems (role split: ~70% mechanical, ~30% electrical), • Manage the preventive maintenance (PM) program, ensuring schedules are followed and maintenance records are accurately kept, • Collaborate closely with production, sanitation, and quality teams to ensure equipment operates safely and efficiently in compliance with GMP, OSHA, and food safety standards, • Assist in vendor coordination, spare parts inventory, and capital project support, • 5+ years of maintenance experience in a manufacturing or food production environment, with at least 2 years in a supervisory or lead role, • Strong mechanical troubleshooting and repair skills; solid electrical knowledge preferred, • Experience working with conveyors, motors, gearboxes, pneumatic systems, and production equipment, • Familiarity with PLC troubleshooting, VFDs, control systems, and basic electrical diagnostics, • Strong organizational and communication skills, with the ability to manage competing priorities in a high-pressure setting, • Experience using preventive maintenance systems (CMMS) and applying maintenance best practices, • Knowledge of GMP, OSHA, and food safety compliance standards, • Previous experience in refrigerated or food manufacturing environments, • Bilingual (English/Spanish) a plus, • Technical certifications in mechanical, electrical, or automation systems

Job Description Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role The Technology & Digital Sales Specialist plays a critical cross-functional role supporting Turtle’s Technology Services business, with a strong focus on Cisco and Meraki growth initiatives. This position acts as the sales operational and communication bridge between Distribution Sales, Turtle Technology Services, TSI Sales, Digital Operations, Marketing, and key customer/prospect interactions. The role combines sales operations, Salesforce support, digital business development, website and SEO optimization, and AI-driven content enablement under the direction of Digital Ops, Marketing, Channel Manager and Sales. This position is central to driving sales, Customer-obsessed experience, efficiency, accountability, and proactive engagement in Turtle’s technology sales ensuring that Cisco, Meraki, and broader technology, services and digital solution opportunities are captured, tracked, nurtured, and expanded. This position is based in Clark, NJ, with occasional travel required to customer sites, branches, meetings, and industry conferences. What You'll Do: 1. Sales Support & Operations for Distribution and TSI Sales • Serve as the operational bridge between Sales, TSI, customers, vendors, and internal teams., • Manage opportunity intake, updates, and progress through Salesforce, ensuring visibility and accuracy., • Support the full TSI sales process, including opportunity qualification, tracking, documentation, and follow-up., • Assist with quote preparation, opportunity research, and coordination with Sales, Cisco/Meraki representatives, and prospects., • Ensure seamless communication between Account Managers, inside sales, engineering resources, and Technology Services., • Support business development initiatives and lead management workflows for new technology opportunities., • Maintain dashboards, reports, and operational KPIs related to sales pipeline activity. 2. Digital Business Development Support • Support content, updates, and optimization for the new Cisco/Meraki digital storefronts and landing pages., • Coordinate with Marketing and Digital Operations to create, upload, and optimize product/service content., • Assisting in tracking digital leads and routing them into Salesforce., • Monitor website performance metrics relevant to technology sales growth., • Ensure brand-aligned, high-impact digital presence for Cisco, Meraki, technology services. 3. Additional Focus area: SEO, Social Media & AI-Driven Enablement Under direction of Marketing and Digital Sales, working in concert with Marketing: • Support ongoing SEO improvements across Cisco/Meraki and Technology Services pages., • Assist in creating or refining social media content aligned to technology business development goals., • Become a trained “trusted AI partner” to help the team leverage AI tools for:, • AI-Driven SEO with the goal of increasing Turtle recommendations, • Content creation, • Opportunity research, • Drafting sales enablement materials, • Data summarization, • Internal process automation, • Ensuring content generated aligns with Turtle brand standards and marketing strategy. 4. Cisco & Meraki Sales Support • Support Cisco Technology Services sales engagement, coordination, quoting workflows, and follow-ups., • Assist with partner portal navigation, certifications, deal registrations, and updates., • Maintain awareness of Cisco/Meraki programs, incentives, and marketing assets., • Coordinate with Cisco channel reps and ensure alignment with Turtle’s go-to-market strategy. What You'll Bring • Bachelor’s degree in Business, Finance, Supply Chain, or related field., • 3–5 years of experience in vendor management, rebate programs, channel operations, or procurement., • Strong knowledge of rebate structures, AD program requirements, and vendor performance metrics., • Proficiency with CRM and reporting systems; Salesforce and QlikView preferred., • Strong analytical and financial skills with ability to interpret data into actionable insights., • Excellent communication, negotiation, and relationship management skills., • Highly organized and able to manage recurring daily, monthly, and annual reporting cycles., • Ability to balance strategic program oversight with detailed operational execution., • Strong problem-solving skills with a focus on accuracy and continuous improvement. What We Offer We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description Electrical and Instrumentation Technician installs, services, troubleshoots and performs preventive and predictive maintenance functions on plant equipment. This equipment includes but is not limited to; plant lighting equipment, electrical circuits, motors, starters, motor control centers, programmable controllers, control panels, transformers, switches, transmitters, automatic valves, regulators, guide systems, distributed control systems, PLC's, overhead cranes etc. May perform additional duties as assigned. Minimum Requirements: Must have a high school diploma or general equivalency diploma (GED). Must have basic math skills. Must be mechanically inclined and a minimum of 2 years of electrical / instrumentation training and/or experience. Essential Job Functions: • Able to troubleshoot, repair and wire 120 volt and (3) phase 460 volt circuits and electrical equipment., • Basic understanding of Electricity and Instrumentation., • Able to troubleshoot, repair and install distribution systems up to 460 volts., • Able to troubleshoot, repair and install controls: coils contactors, relays, brakes etc. LANGUAGE SKILLS: Able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. MATHEMATICAL SKILLS: Able to read a tape measure with speed and accuracy. Able to calculate figures and amounts such as percentages, measurement, volume and rate. Able to apply concepts of high school math. REASONING ABILITY: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or graphic form. Ability to deal with problems involving several concrete variables in standardized situations. Leading root cause analysis and problem solving teams. Analytical and field troubleshooting skills. TECHNICAL SKILLS: Working knowledge of mechanical and electrical machinery, including conveyer systems, breakers, boilers, hydraulic and pneumatic systems, etc. Knowledge of computer systems and the ability to learn new complex applications. CERTIFICATES, LICENSES, REGISTRATIONS: May be required to maintain a current Lift Truck Operator License and/or other appropriate certification to work in certain areas or on certain equipment. PHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand, walk, and talk or hear. The employee frequently is required to use hands to finger, handle, or feel; reach with hands and arms; and stoop, kneel, crouch, or crawl. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to wet and/or humid conditions. The employee is occasionally exposed to high, precarious places; fumes or airborne particles; and vibration. The noise level in the work environment is usually loud. • Able to install transformers up to 460 volt, • Able to interpret wiring drawings / diagrams., • Able to wire motors single phase, 3 phase 460 volt and 3 phase 4160 volt as per NEC / OSHA codes and Pratt standard operating procedures., • Able to use and interpret a Megohm meter., • Able to use and interpret a multimeter; volts, amps and ohms, • Able to troubleshoot and install switches; proximity, speed, limit, pressure etc., • Able to run and bend conduit and pull wire., • Able to troubleshoot control valves and transmitters., • General knowledge of electrical and pneumatic systems in mill., • Understanding of pneumatic controls including controllers, actuators, positioners and valves.

Job Description Overview Hiring: Outside Sales Representative Company: Coastal Supply Group Location: Elizabeth, NJ Job Type: Full-Time, 7-5, M – F Pay Rate: $70k Salary, + Commission, + Mileage, Laptop, Cell, EZ Pass About Us Coastal Supply Group is a trusted leader in HVAC & Plumbing Supplies. We pride ourselves on delivering exceptional products, unmatched technical support, and outstanding customer service. We are seeking a dynamic Outside Sales Representative to join our team and help us grow our customer base while strengthening existing relationships. Summary The Outside Sales Representative will grow sales and increase profitability by cultivating relationships with current customers and recruiting new ones. This role promotes our products, provides technical support, conducts customer training, and drives sales initiatives within an assigned territory. What you will do • Actively sell and close business, always asking for the sale., • Understand and apply basic business analytics to customer needs., • Promote products, manage campaigns, and train customers with enthusiasm., • Present value propositions tailored to customers' business situations., • Assist customers in differentiating from competitors and improving their sales skills., • Build and maintain strong, long-term customer relationships., • Understand customer business models and help them develop marketing strategies., • Use company systems for planning, tracking history, and improving processes., • Prepare for meetings with clear objectives and follow a structured account planning process., • Serve as a trusted advisor and adapt the approach for different customer types., • Plan and prioritize daily, monthly, and annual sales activities., • Manage budgets and meet or exceed sales targets., • Leverage company resources to resolve issues and enhance customer satisfaction., • Collaborate with inside sales, management, and other departments to meet customer needs., • Share best practices and market insights with the team., • Demonstrate a positive, team-oriented attitude., • Develop deep knowledge of our product lines and industry., • Understand competitor products and market strategies., • Use Microsoft Office and related software proficiently. What you will need • Experienced in Product and application in [HVAC/plumbing/electrical/etc.], • Minimum 2 years in a sales-related role (3+ years preferred), • Wholesale distribution experience, • Valid driver’s license with a clean driving record, • High School Diploma or GED (bachelor’s degree preferred) What we offer • Competitive base salary, + Commission, + Mileage, Laptop, Cell, EZ Pass, • Health, Dental, Vision, Disability, Life, ADD,, • Profit Sharing, 401K with match, • Paid Time Off and 6 Paid Holidays, • Opportunities for professional growth and advancement

Job DescriptionElectrical Engineer - OCONUS Riyadh, Saudi Arabia Exp Federal is an established, collaborative, and growing full service architectural and engineering firm that provides a full range of design solutions, construction and mission support to the federal government. Our team of professionals operate in some of the most challenging environments to provide support services to a variety of governmental agencies globally. We enjoy what we do and are good at it. The Challenge: We are seeking an Electrical Engineer who can provide regional technical support for a potential project in Riyadh, Saudi Arabia. This position is contingent upon award of contract. Principle areas of responsibility are: • Responsible for developing inspection criteria, electrical designs; performing technical reviews of electrical designs developed by architectural-engineering firms (A-E) or government organizations and resolving electrical design related problems arising during construction and inspection by the inspection team., • Provide expertise on the electrical engineering aspects of the installation; modification; operation; and maintenance of facilities, mission systems, support systems, and power generation/distribution/grounding systems., • While there is not a design element in this contract, the Electrical Engineer will serve as a subject matter expert to review and inspect electrical installations to ensure code compliance for new construction that is in progress or completed., • There may be a need, from time to time, to prepare drawings, specifications, and procedures for the repair, installation, integration, and maintenance of electrical equipment and systems., • Employment is project-based and will take place in ., • A BSEE degree from an accredited college/university, • Experience with installation and maintenance of low voltage (<1,000 VAC RMS) 50/60 Hz single and multiple phase wiring, including grounding., • At least two years of experience demonstrating the ability to apply the standards of UFC 1-200-01, UFC 1-201-02 and UFC Series 3-500. Salary Range: This position has an annual range of $110,000.00 To $150,000.00. The actual hourly is based on several factors that are unique to each candidate, including but not limited to skill set, depth of experience, certifications, and specific work location. More About Us: Exp Federal delivers full-service Architectural & Engineering and Design-Build solutions. You will be part of an expanding team that works collaboratively across our wider exp Federal design studios. As part of a project team, you will have the opportunity to work on a variety of projects that keep you engaged and showcase your individual talents. We believe in identifying potential in people and then providing opportunities to achieve success. Our employees work on complex projects that require innovative, efficient solutions, and collaboration across various disciplines. Joining our team is a commitment to meaningful work supporting federal government clients across multiple sectors. Employees and clients alike will look to you for results that exceed their expectations. Our Values: Respect: We respect people, honor diversity, and treat each other fairly. These are the cornerstones of our culture and the key to our culture and the key to our ability to work successfully as a global team. Unquestioned Integrity: We operate with the highest standards of honesty and responsibility – as individuals and as a corporation. We’re people who meet routine, everyday obligations with honesty. Safety: We place the highest priority on the health and safety of our employees and protection of our assets and the environment. Our goal is zero work-related injuries. Customer Service: We listen and respond to the changing needs of our customers, the industry, and the environment, and draw upon lessons learned from our experiences around the world. Impeccable Quality: We recognize that quality is fundamental in all our operations — it is everyone’s responsibility. We have established procedures, assessments, and continuous improvement processes in place to ensure the quality of our work. Sustainability: We understand the impact of our work on the environment and that sustainability is a part of everything we do. We work with customers to provide responsible, efficient, healthy, and effective project solutions to reduce our overall environmental impact. Salary Range: This position has an annual range of $110,000.00 To $150,000.00. The actual hourly is based on several factors that are unique to each candidate, including but not limited to skill set, depth of experience, certifications, and specific work location. What We Offer: ⌚ Exponential full-time professional growth and development ⏩ Fast paced and professional work culture ???? 401(k) employer match ???? Learning & Development tuition reimbursement ????️ Generous PTO policy What Happens Next? Our Talent Engagement Team will contact you via email to let you know what next steps at exp Federal look like for you! Make sure to check your spam. Don’t worry, if you are not selected to move forward in the interview process, we will keep your resume on file for future opportunities you may be a better fit for. *Actual compensation packages are based on several factors that are unique to each candidate, including but not limited to skill set, depth of experience, certifications, and specific work location. This may be different in other locations due to differences in the cost of labor. Exp Federal is proud to be an Equal Opportunity Employer who fully and actively supports equal access for all people regardless of Race, Color, Religion, Gender, Age, National Origin, Veteran Status, Disability, and Family and Medical Leave. U.S. Citizenship is required for our positions in accordance with 8 U.S.C. 1324b.2c. Should you need any special accommodations, please feel free to contact us at and we will arrange for the most suitable accommodations based on your needs. Beware of Fraudulent Job Postings Please be aware of recruitment scams where people or entities are misusing the name of exp Federal/exp Federal Pacific to post fraudulent job postings. We will never charge a fee for joining our company or to vet the authenticity of an employee or applicant. Exp Federal | LinkedIn | ClearanceJobs | ADP Career Center

Job Description An Engineering, Procurement, and Construction contractor specializing in the installation of utility and industrial process infrastructure including substations, power generation, industrial process facilities, and renewable fuel projects is hiring a full-time Electrical Construction Coordinator. Responsibilities: • Lead, manage, and supervise all electrical field personnel and subcontractors on-site, • Ensure adherence to safety protocols, quality standards, and project schedules, • Serve as the primary on-site electrical expert and liaison between project management, engineering, and field crews, • Coordinate the installation of electrical systems including power distribution, instrumentation, control systems, lighting, grounding, and renewable energy systems, • Review construction drawings, specifications, and work packages to plan daily and weekly field activities, • Interface with other disciplines (civil, mechanical, instrumentation) to coordinate installations and resolve conflicts, • Oversee installation of electrical infrastructure such as substations, switchgear, MCCs, transformers, and cabling for both renewable and chemical refining systems, • Conduct routine inspections and ensure compliance with NEC, NFPA, and relevant local and federal codes, • Verify that all electrical work meets quality expectations and passes required inspections and testing., • Promote and enforce a strong safety culture on site in accordance with company and OSHA requirements, • Ensure compliance with environmental regulations related to electrical systems in renewable and chemical processing environments, • Maintain daily logs, progress reports, and support schedule updates, • Track material deliveries, manpower, and equipment usage, • Participate in progress meetings, punch lists, and close-out processes, • Performs any other duties assigned, • Adheres to internal standards, policies, and procedures Qualifications: • Broad knowledge of Electrical construction including equipment, labor, means and methods, codes, and standards, • 15+ years of related electrical construction experience in industrial, petrochemical processing plants, oil refining and power generation projects, • Refinery and chemical processing experience is a must, • 30 Hour OSHA Certification, • A degree in Electrical Engineering or Construction Management a plus, • Broad understanding of electrical construction and site logistics., • Knowledge and understanding Labor Regulations, • Strong and effective communication and problem-solving skills, • Excellent time management and organizational skills, • Strong leadership and management skills, • Function effectively within a team unit, • Broad understanding of construction documents and drawings, • Computer proficient with ability to adapt to new innovations and processes, • Technically proficient, • Motivate staff and trade contractors to perform at the highest level possible Company DescriptionWe are an engineering consulting groupWe are an engineering consulting group

Job Description Kickstart Your Career in Sales with Turtle’s Sales Development Program Join a Team that Moves and Builds What Matters Looking for more than just a job? Ready to build a career where your growth is accelerated, your ideas are valued, and your work powers the industries shaping the future? Welcome to Turtle — one of the nation’s largest independent electrical and industrial distributors, delivering smart, sustainable solutions across automation, electrification, and infrastructure. As the world rapidly shifts toward electrification and energy transformation, electrical distributors like Turtle are playing a vital role in modernizing the grid, supporting EV adoption, and enabling sustainable infrastructure projects. Our work directly supports cleaner cities, more efficient buildings, and greener industries — and our Sales Development Program puts you at the center of it all. This 12–18-month, full-time, paid program equips you with the technical knowledge, real-world experience, and hands-on training to build a long-term, impactful career in sales. You’ll be immersed in the front lines of sustainability-focused growth — learning how to help customers modernize, save energy, and meet evolving regulatory and environmental goals. Designed as a launchpad for your future, the program is intended to lead to full-time placement within our sales organization at Turtle — including commission-earning roles — upon successful completion. What You’ll Experience Over 12-18 months, you’ll rotate across departments and markets to gain a deep understanding of how we operate, sell, and lead in this fast-moving space. Rotations include: Why Join the Turtle Sales Trainee Program? • Learn from leaders — Gain mentorship from experienced sales professionals and executives., • Sharpen your skills — Build a powerful toolkit of sales techniques, business acumen, and technical knowledge., • Travel & explore — Visit vendor partners, explore different markets, and understand the industry at every level., • Join a community — Be part of a cohort-based program where you’ll build friendships, share experiences, and grow together., • Relocate with support — We’ll help you move to where your career is needed most., • Think like an entrepreneur — Develop a business-building mindset: take initiative, own your success, and thrive in a culture that rewards agility and drive., • Fuel the future — Help customers modernize through sustainable, electrified solutions that make a measurable impact., • Unlock your future — Launch your career in a high-growth market, with unlimited potential to grow, lead, and shape your own success. Culture at Turtle: Where Your Future Has Purpose As a fourth-generation, family-owned business, we’ve created a culture of innovation, mentorship, and career advancement that spans over a century. Our culture unites around a shared purpose: rethinking energy, advancing technology, and building sustainable solutions. Every role at Turtle contributes to something bigger. Here, your ideas matter, your growth is championed, and your voice is heard. You’ll be part of a culture where belonging is real, ambition is encouraged, and legacy is something we build together. Join a company where people come first, and the future is built by all of us. Our values drive how we show up for each other, our customers, and our communities every day. From collaboration to innovation, we lead with purpose — including a deep commitment to sustainability. We build lasting partnerships by putting people first, guided by care, trust, and responsibility. At Turtle, you’ll find a team that rises together, embraces change, and celebrates every win. This is where your career has meaning, and where your future is built alongside others who share your passion and drive. What You Bring • Bachelor’s degree (GPA 3.0+ preferred), • Strong interest in sales, business, engineering, or operations, • Confident communicator and natural relationship-builder, • Analytical thinker who’s ready to learn and take ownership, • Comfortable in fast-paced environments with real accountability, • Must be willing to relocate to one of Turtle’s growth markets after program graduation (relocation support provided) What We Offer • A competitive base salary to kick-start your career, • Company-matched 401(k) to help you build your financial future, • Comprehensive medical, dental, and vision coverage, • Generous paid time off including vacation, sick days, and holidays, • Hands-on training, dedicated mentorship, and real leadership development, • Relocation support to help you get where you need to grow, • A clear, personalized career path with advancement opportunities, • A supportive, team-oriented culture that puts people first, • A dynamic role built for self-starters who want to make an impact, • A mindset of endless potential — your success is in your hands Who We Are Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated division provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job DescriptionWhy Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role Turtle is seeking a talented professional in the Credit Associate role in Clark, NJ. What You’ll Do: • Contact customers regarding balances due, • Contact customers or salespeople regarding short paid or disputed invoices, • Contact delinquent customers to collect payments Review and address orders on credit hold, • Reduce delinquency and bad debt loss based on periodic credit reviews, • Meet with customers to build relationships and promote better customer service, • Use the lien and bond laws where applicable to help with collections, • Provide support and service for designated branches for credit and collection functions, • Responsible for contacting customers and requesting payment in a timely manner, • Become familiar with tax laws in the applicable states, • Review the aging reports on an ongoing basis, • Make recommendations to restrict accounts when needed, • Ensure credit limits assigned to existing customers are reasonable and supportable, • Plan and maintain a systematic follow up process What You’ll Bring • Associate’s degree preferred. Degree may be substituted for 3 years relevant experience in credit for the construction and industrial equipment industries., • Solid understanding of root cause analysis and process improvement concepts, • Good negotiation skills, • Strong Microsoft Excel skills, • Highly detail oriented, • Organized and excellent time management skills a must, • Ability to work in a fast paced environment and handle multiple priorities We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Job DescriptionBenefits: • Dental insurance, • Health insurance Must have: Blue seal Refrigeration Toxic License/Seal & Black Seal Steam License/Seal Job Description Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and any other supporting equipment as directed by management. Performs duties as assigned by the Facility Manager and/or Gold Seal Ensures continuous operation of all the facility utility systems and peripheral equipment to support the requirements of the production schedule and facility conditions. This requires proper coordination of all operations and maintenance utilities equipment. Coordinates both internal and external resources for maintenance of the facility. Assists in the record-keeping and training requirements for all components of the Process Safety Management/Risk (PSM/RMP management plans to achieve compliance with state and federal guidelines. Performs preventative maintenance on equipment to maintain in good working condition. Utilizes drawings, technical records, and vendor diagrams to complete Preventative Maintenance documents (PMs) related to machine overhauls and repairs. Performs other duties as assigned. WHAT'S ON THE MENU Provides technical analysis and services to provide real-time data on the status of refrigeration and operational equipment. Takes a leadership role on the emergency response team in the event of release of hazardous chemicals. Assures the ammonia compressors are operating safely and efficiently to reduce energy consumption. NECESSARY INGREDIENTS High school diploma or GED required. Knowledge of equipment set-up, functions, operating procedures, and preventative maintenance techniques. Basic knowledge in programmable logic controllers (PLCs) preferred. Demonstrated knowledge and application of best practices in maintenance and safety management. Knowledge of state and federal regulatory requirements as related to plant and utilities systems operations, safety, and environmental agencies. Knowledge of best available energy management practices and procedures. Ability to read and interpret work orders, operating manuals, and maintenance instructions in English. Ability to complete forms detailing maintenance work performed. Requires

A company is looking for an Electrical Instrumentation Engineer to support the design development of instrumentation and control systems for electrical distribution systems. Key Responsibilities Support instrumentation-related threat mitigation and incident management Ensure smooth operation of i

Job Description • We are hiring immediately for a full time MAINTENANCE ELECTRICIAN position., • Location: L'Oreal - 30 Terminal Avenue, Clark, New Jersey 07066. Note: online applications accepted only., • Schedule: Full time; Monday through Friday, hours may vary. Occasional Saturdays required. More details upon interview., • Requirement: Certified Electrician with high voltage experience and familiarity with CMMS is required., • Pay Range: $30.00 per hour to $43.00 per hour. ESFM is the corporate Integrated Facilities Management (IFM) division of Compass Group USA and a Keystone member of the International WELL Building Institute (IWBI). We Make Applying Easy! Want to apply to this job via text messaging? Text JOB to 75000 and search requisition ID number 1470767. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: Rooted in hospitality, ESFM elevates the workplace experience as the single source of innovative FM solutions that ensure a safe, healthy, and sustainable environment. ESFM’s clients include many household names from Life Science, Technology, Oil & Gas and Manufacturing markets. ESFM self-performs 80% of all IFM solutions provided to clients. Their portfolio of service categories includes Environment, Health & Safety, Facilities Maintenance & Engineering, Sustainability, Janitorial & Industrial Cleaning, Laboratory Support and Workplace solutions. This self-performance model creates a consistent hospitality experience for clients, resulting in higher engagement and productivity from their employees. In 2020, ESFM (formerly Eurest Services) won the George Graves Award for Facility Management Achievement from the International Facilities Management Association (IFMA). Job Summary Summary: Operates and maintains all equipment, guided by a general knowledge of building trades, carpentry, painting, minor electrical, plumbing, mechanical system repairs, plant maintenance and the use of tools and basic maintenance supplies. Essential Duties and Responsibilities: • Provides quality customer service by providing one-on-one attention to detail., • Responds to dispatch calls for machine repairs using company vehicle., • Calls on existing customers to determine adequacy of service; listens to and resolves service complaints., • Inspects and listens to machines to identify causes of malfunctions; dismantles machines to gain access to problem area., • Performs a variety of duties in maintaining, repairing, operating and renovating plant and facilities., • Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair., • Reads blueprints and diagrams, determines materials needed, estimates time and material costs on installations and requests supplies to assure timely and adequate availability., • Installs, tests and repairs electrical fixtures, power distribution circuits, utility equipment, internal communication and alarm systems and elements of heating and medical equipment., • Diagnoses and corrects trouble on electrical installations; recommends emergency courses of action to keep vital electrical equipment operational., • Recommends appropriate sources of electrical power for new installations or renovation projects., • Works on power lines, including 120 to 480 volts and on transformers, switch gears, cubicles, etc., • Performs corrective maintenance in accordance with the work order system., • Installs/repairs high and low-voltage electrical equipment including transformers, panels, feeders, motors, switches, fire alarms, intercoms, computers and other equipment in a timely manner., • Maintains clean and safe work environment; performs job safely., • Exhibits professionalism with customers, fellow employees and others., • Performs other duties as assigned. Qualifications: • Valid Non-CDL Class C driver's license., • Valid current state/local electrical license., • Two years of trade school or related experience., • Two years of experience as an electrician in a similar-sized institution in an engineering or maintenance occupation., • Working knowledge of local, state and the National Electric Code (NEC). Associates at ESFM are offered many fantastic benefits. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice and facility management industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. ESFM maintains a drug-free workplace. ESFM

Job Description Electrical Engineer – Iselin, NJ Direct Hire/ Permanent Placement $90k – $150k Base, 1st year onsite and then hybrid schedule, Full benefits, 401k THE CLIENT Multi-disciplinary Engineering Consultancy with their hands in numerous fields and building types: Residential, Commercial, Healthcare, Mission Critical, K-12, Higher Ed, Restaurant, Warehouse, etc. ROLE/ RESPONSIBILITIES/ SKILLS/ EXPERIENCE • Electrical design of power distribution, lighting, fire alarm in accordance to NEC codes and standards, • Electrical equipment calcs, selection, and layout of switchgear, transformers, electrical panels and emergency generators, • Large scale and Complex building projects, • Project Management, • Site visits, Site Surveys, respond to RFIs, and reviewing shop drawings, • Revit, AutoCAD, SKM, COMCheck, AGI 32, • Degreed BSEE BSAE or equivalent, • EIT, PE, LEED Preferred, • 3+ years of relevant experience • No Sponsorship available

Job DescriptionDescription: Position Summary We are seeking a detail-oriented and experienced Estimator with a strong background in electrical engineering, switchgear systems, and manufacturing. The ideal candidate will be responsible for preparing accurate cost estimates for custom switchgear and electrical equipment projects, supporting sales, engineering, and production teams to ensure competitive and profitable bids. Key Responsibilities • Analyze blueprints, specifications, proposals, and other documentation to prepare accurate estimates for time, cost, materials, and labor., • Collaborate with engineering and production teams to ensure feasibility and alignment with manufacturing capabilities., • Evaluate project scope and identify value engineering opportunities., • Communicate with suppliers and vendors to obtain current pricing and lead times., • Generate comprehensive proposals and quotations for clients, ensuring timely submission of bids., • Maintain a database of historical costs and assist with post-project analysis., • Support business development efforts with technical expertise and pricing strategies. Requirements: Required Qualifications • Bachelor’s degree in Electrical Engineering or related field., • 3+ years of experience in estimating within the electrical manufacturing industry., • In-depth knowledge of switchgear, control panels, and electrical distribution systems., • Familiarity with manufacturing processes, materials, and cost drivers., • Proficiency with estimation and CAD software; ERP/MRP system experience is a plus., • Experience working in a custom or build-to-order manufacturing environment., • Knowledge of UL standards and relevant electrical codes., • Excellent verbal and written communication skills.

Job Description Why Turtle? At Turtle, we’re redefining what it means to be an industry leader in electrical distribution, and we want you to be part of our exciting journey! For over 100 years, we’ve built a reputation for innovation, excellence, and exceptional customer service—and we’re just getting started. We are a diverse, passionate team spread across the US, Canada, Mexico, and Puerto Rico, committed to growth, learning, and creating opportunities for each other. At Turtle, every day is a chance to make a real difference, solve complex challenges, and push the boundaries of what’s possible. We believe in fostering an environment that inspires collaboration and sparks creativity, where employees are empowered to contribute to our mission and shape the future of the industry. If you're looking for a fast-paced, dynamic career where your ideas are valued and your growth is prioritized, Turtle is the place for you. Join us and be a part of a company that’s making waves and empowering its people to do extraordinary things every single day! About the Role The National Senior Sales Engineer is responsible for developing and executing the company's sales strategy to achieve revenue and growth targets. This role involves managing Turtle’s national customer’s expectations by working with the national account managers and the national project managers by providing quotes, bill of materials, and solutions while setting sales goals, driving revenue growth, and ensuring the sales team's alignment with the company's overall objectives. What You'll Do: • Sales Strategy and Planning:, • Develop and implement a comprehensive sales strategy in alignment with the company's business objectives., • Set clear and measurable sales targets, both short-term and long-term, and create actionable plans to achieve them., • Monitor market trends, competitor activities, and customer feedback to adapt the sales strategy as needed., • Review and understand the Project Engineering contract documents., • Read and interpret SLD, data sheet, specifications and other project-related documents such as building layout, equipment plan view, and electrical schematics., • Provide value engineered solutions tailored to the customers’ design intent., • Support all BESS projects nationally., • Team Leadership and Management:, • Foster a culture of accountability, collaboration, and continuous improvement within the sales department., • Mentors junior Engineers, switchgear specialists and project managers, • Revenue Generation:, • Drive revenue growth by identifying new business opportunities, expanding market reach, and maximizing sales to existing customers., • Develop and nurture relationships with key clients and partners to secure strategic accounts and partnerships., • Monitor sales performance and implement corrective actions when necessary to meet or exceed revenue targets., • Sales Operations:, • Oversee all aspects of sales operations, including forecasting, pipeline management, and sales reporting., • Collaborate with other departments, such as marketing and product development, to ensure product market fit and effective sales strategies., • Implement and manage sales technologies and tools to optimize sales processes and efficiency., • Budget Management:, • Develop and manage the project budget while allocating resources to effectively support sales objectives., • Bachelor’s degree in electrical engineering (Master's degree preferred)., • Professional Engineering membership, P. Eng or P.E, is preferred, • Proven track record of successful sales leadership with a minimum of [5] years of experience in sales management and [5] years in a senior leadership role., • Strong understanding of sales strategies, market dynamics, and industry trends., • Exceptional communication, negotiation, and presentation skills., • Proficiency in sales management software and CRM systems., • Ability to analyze data and make data-driven decisions., • Excellent leadership and team-building abilities., • Demonstrated ability to meet and exceed sales targets. We offer a competitive benefits package that includes: • 401(k) plan, • Health insurance, • Dental insurance, • Vision insurance, • Life insurance, • Paid holidays, • Vacation Founded in 1923, Turtle is a fourth-generation, family-owned, and three-generation women-owned business, and one of the nation’s largest independent electrical and industrial distributors. Headquartered in Clark, NJ, our Electrical Distribution division operates 14 branches spanning from coast to coast. It is a significant force in the engineering and procurement of power distribution, automation, lighting, and energy projects, offering integrated services for the industrial and construction markets. Turtle Integrated provides on-site MRO procurement, cost-saving, and spend analytics across the US and in Canada, Puerto Rico, and Mexico. What To Do Next You can begin by filling out our application online. If you want to learn more about Turtle, please visit our website or our LinkedIn: @Turtle. Turtle is proud to be is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, gender identity or expression, national origin, disability, genetic information, pregnancy, marital status, military or veteran status, or any other protected characteristic as outlined by federal, state, or local laws.

Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and

Maintains the following equipment: Ammonia refrigeration system, Freon packaged refrigeration units and building heating and air conditioning equipment, high pressure steam boiler systems, hot water generator, compressed air systems, electrical distribution equipment, building sprinkler systems, and

Job Description Great opportunity to join a winning team & professional company! The ideal candidate will be hardworking, loyal, self-motivated, and have a positive 'can-do' attitude! The Site Manager will oversee renovations and capital Improvement projects at multiple multi-family residential communities for the Company. Duties will include purchasing, receiving, storing, and distributing material. Regular field visits of projects ensuring scheduled progress and quality standards are met. Additional responsibilities will be to maintain and track inventory as well as managing tools, equipment, and vehicles for the company. This position will also research and identify products and material that are best suited for the company needs and budget. Assist the Renovations/Capital Management team in various field roles as needed. ESSENTIAL DUTIES AND RESPONSIBILITIES: Create comprehensive material lists to be used for renovation ordering according to property and floor plan. Purchases supplies, materials, and parts for the company. Maintains knowledge of trends, prices, buyers, and delivery conditions to anticipate future material availability; directs purchasing programs accordingly. Coordinate orders and deliveries to meet various schedules and project timelines. Negotiates with vendors for optimal cost and delivery times. Maintain a purchase order system and reasonable 'unit assignment' tracking for material purchases. Collaborates with sales, customer service, and logistics departments to maximize efficiency in the purchasing and inventory control department. Communicates with suppliers to resolve problems that may arise regarding delivery, quality, price, or conditions of sale. Verify that all deliveries match purchase orders and track/confirm relevant invoice accuracy. Develops and implements policies and procedures related to purchasing and inventory control with a goal to maximize efficiency and optimize workflow. Maintains material storage and equipment areas ensuring they are neat, clean, and professional at all times. Maintains master inventory database of tools, equipment, and vehicles owned by the company and manages appropriate maintenance schedules to ensure optimal benefit from investment. Preform quarterly audits at each property to ensure company owned tools, equipment, and vehicles, etc. are accounted for and are being properly maintained. Performs other duties as assigned. QUALIFICATIONS: Minimum 2 years' experience in renovation, maintenance or construction field or equivalent experience working with relevant material. Knowledge of general construction, mechanical, electrical, plumbing, tile, carpentry, building, etc. Knowledge of construction and maintenance material uses and costs. Proven negotiating skills. Excellent time management skills with a proven ability to meet deadlines. Strong analytical and problem-solving skills. Ability to multi-task, strong organizational skills, with attention to detail and quality. Ability to lift up to 50lbs and work outdoors for extended periods to handle material receiving and distribution. Possess excellent verbal and written communication skills and have a process improvement- oriented mindset. Ability to exercise tact, courtesy, and ethics when dealing with vendors, co-workers, and customers. Must be computer literate in Excel (or spreadsheet software), Word, and Windows. Assure job site safety standards are used which comply with all company, local, City, State and Federal guidelines.

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. we are seeking a proven Switchgear Project Manager to join its dynamic team and the growing organization. This role is available immediately and provides a great growth opportunity for the right candidate. It is a full-time, exempt position, and the candidate will report directly to the Project Manager-Supervisor. The successful candidate will be responsible for the initial design and project Management Of Electrical Distribution Equipment, including Panelboards, Switchboards, and Circuit breakers. At Lincoln Electric Products Co. Inc., Project Management begins at Stage 1, which is Engineering. This means the Project Manager is involved right from the start of the project lifecycle, leading the coordination of engineering activities, ensuring design specifications are met, and setting the foundation for successful execution. It's a hands-on role that combines technical understanding with cross-functional leadership. Job Responsibilities • Focus is switchgear projects for commercial construction, commercial facilities, and OEMs., • Collaborate with sales, engineering, and manufacturing teams., • Designing and drawing Switchboards/ Panelboards., • Reviewing outgoing engineering submittal drawings for technical and contractual accuracy., • Evaluating and interpreting customer specifications and drawings to create an accurate bill of materials., • Providing phone support and direct interaction with customers and employees to obtain sales, • Reviewing returned drawings and submittals of same, analyzing and processing mark-up/comments, and communicating changes to the internal and external stakeholders, • Review contract documents, interpret technical specifications to ensure product compliance, and prepare change order pricing and quotations if needed., • Coordinate and facilitate the completion of Short Circuit and Coordination Studies., • Releasing equipment for production and delivery to an in-house shop., • Coordinating deliveries with customers., • Enter orders into the company ERP software system., • Configure and order long lead time major materials/components for the project., • Perform visits to survey site layout and logistical challenges as needed., • Provide post-sales support for equipment. Requirements: Job Requirements • Bachelor’s degree in Electrical Engineering., • 3+ years within the industry., • Thorough knowledge of electrical power systems, • Good knowledge of Industry UL standards and NEC standards, • Proficiency with MS Excel., • Ability to collaborate with team members.