Engineer in training jobs in Levittown, New YorkCreate job alerts

Job Description \n Performs a variety of instrumentation decontamination, sterilization, packaging, inventory, and distribution tasks according to established department policies and procedures. \n Job Responsibility \n \n\n • Dissembles, cleans, sterilizes, reassembles and packages sterile supplies according to specifications and/or manufacturer instructions. \n \n, • Follows department procedures to use appropriate sterilization method for various types of instrumentation.\n, • Operates washers, sterilizers, ultrasonic machines, steam and ethylene oxide sterilizers, heat sealers, and additional equipment during sterilization procedures.\n, • Adheres to instrument count sheets for surgical sets and case carts.\n, • Covers and rotates trays and sets per sterile storage guidelines.\n, • Follows safety protocols to ensure no injury to self/others (proper body mechanics, protective apparel during decontamination procedures, etc.)\n \n, • Retrieves used trays, instruments and equipment from various surgical and clinical hospital areas for decontamination.\n, • Examines instruments and patient care equipment for cleanliness, proper assembly and functionality.\n, • *Identifies malfunctioning items, records related information, and promptly notifies supervisor or biomedical engineer.\n, • Receives and fills requisitions from hospital departments and nursing units.Communicates with perioperative staff regarding related instrument needs.\n, • Transports sterile supplies to assigned surgical and clinical locations.\n, • Assists in ordering, stocking and maintaining department inventory levels.\n, • Performs required duties to maintain a contaminant-free work environment.\n, • Documents and maintains records of daily activities according to department policies and procedures.\n, • Adheres to AORN, AAMI and Joint Commission standards (e.g biological, chemical and mechanical monitoring) in the performance of duties.\n, • Participates in department quality control programs and in-service training, as required.\n \n Job Qualification \n \n\n • High School Diploma or equivalent, required.\n, • Sterile processing certification (CRCST or CSPD) OR provisional certification (CRCST), required.\n, • Must complete minimum annual continuing education credits required by NY State AND additional continuing education credits required to maintain certification status.\n, • Prior experience processing surgical information, preferred.\n, • Ability to lift/carry 25 pounds, required. Manual dexterity, ability to stand, bend, lift and/or reach for extended periods of time, required.\n

Project Engineer We are looking for a Project Engineer to join our Target Rock team! You will direct all engineering aspects of projects related to design, development, and supply of high-pressure valves for nuclear power applications or industrial valve applications. Ensures valves supplied meet customer purchase order and specification requirements as well as all industry related codes. You will provide support to planning, purchasing, manufacturing, quality, contracts, programs, and assembly departments, as required, including proposals needing engineering inputs, engineering changes (ECOs), vendor support, quality audits and dispositioning of non-conforming hardware to resolve any in process issues and/or maintain product flow. Salary/hourly rate: $84,000 to $118,000 Please note that the salary range information provided is a general guideline only, reflecting a position based in New York. Criteria such as the candidate's qualifications and relevant experience, the scope of the specific position, as well as market and business considerations will be evaluated when extending an offer. We Take Care of Our People Paid Time Off I 401K with Employer Match and Profit Sharing I Health and Wellness Benefits I Learning and Development Opportunities I Referral Program I Competitive Pay I Recognition I Employee Stock Purchase Plan I Inclusive & Supportive Culture * Your Challenge: \n • Review of specifications for compliance with proposed design.\n, • Preparation and release of design drawings and procedures.\n, • Preparation and review of design and qualification reports.\n, • Direction of qualification test programs.\n, • Interpretation of applicable customer specifications and industry codes (ASME BPVC, ASTM, ANSI, AMS, IEEE, etc.)\n, • Disposition of non-complying equipment in a timely manner.\n, • Resolution of assembly and test problems.\n, • Supports Energy Products Sales bid and proposal activities.\n, • Provide technical support for customers as required\n, • Ensure all project technical requirements are captured on the project's bill of material\n, • Resolve technical issues during product flow from Engineering Release through product shipment\n, • Notify program manager of any potential issues that may affect progress of the project\n, • Monitor hardware through TR Operations and with our suppliers to ensure there are no technical issues stopping product flow\n, • Report component and valve status to the customer when requested\n, • Knowledge of valve products and industry requirements.\n, • Three (3) years of valve and/or power plant experience.\n, • Working knowledge of applicable ASME and other codes.\n, • Strong analytical and decision-making skills\n, • Knowledge of computer programs such as Microsoft Office Suite, Mathcad, , and ANSYS\n, • Four (4) year Bachelor of Science degree in Engineering (Mechanical or Nuclear)\n, • Professional Engineering Registration (preferred)\n, • Power Plant Systems training\n, • Product application\n#LI-NK No unsolicited agency submittals please. Agency partners must be invited to participate in a search by our Talent Acquisition Team and have signed terms in place prior to any submittal. Resumes submitted directly to any Curtiss-Wright employee or affiliate will not qualify for fee payment, and therefore become the property of Curtiss-Wright. Compliance Statement This position may require exposure to export-controlled information and subject to additional security screening. In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn. Curtiss-Wright is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, ethnicity, color, sexual orientation, gender identity, physical or mental disability, age, ancestry, legally protected medical condition, family care status, marital status, religion, veteran status, national origin, or any other legally protected status. If you require accommodation during the recruitment process, please contact Talent Acquisition. For US Applicants: EEO is The Law - click here for more information. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Talent Acquisition and we will make all reasonable efforts to accommodate your request.

Job Description RouteSmart Technologies, a leader in vehicle route optimization software technology, is seeking a Senior Software Engineer to join our development team. This role will report directly to the Lead Software Engineer and is responsible for designing, coding, and supporting a variety of web applications and services. These responsibilities include contributing to the development of a suite of cross-platform routing systems that integrate advanced GIS and mapping capabilities with intuitive design and seamless navigation. A deep understanding of RouteSmart products is essential to ensure features are implemented accurately and effectively. The ideal candidate will also offer valuable insights from the end-user perspective, helping to shape a user experience that is both functional and user-friendly. The typical base pay range for this position at the start of employment is expected to be between $115,000–$130,000 per year. RouteSmart Technologies, Inc. has different base pay ranges for different work locations within the U.S., and base pay will vary based on experience. This is a hybrid role; candidates must be able to commute to the office in Columbia, MD or Melville, NY. Candidates must reside within 50 miles and be available to work onsite several days per week. However, we will consider the right candidate for remote work if domiciled in one of the following states: Maryland, New York, Pennsylvania, DC, Virginia, Arizona, California, Colorado, Florida, Idaho, Illinois, Indiana, Minnesota, New Jersey, North Carolina, Oregon, South Carolina, Texas, Washington. Essential Duties & Responsibilities • Lead and mentor other members of the development staff in coordination with the Lead Software Engineer, including the assignment of and review of tasks, • Keep team up to date on the latest relevant development technologies and be able to recommend, prioritize, and integrate these technologies into all RouteSmart products, • Develop maintenance roadmaps for all development frameworks, libraries, and tools so we can remain current for all critical patches and major software updates, • Write both DDL and DML SQL commands, functions, and scripts, • Full stack development: both client and server-side development skills are required, • Write well designed, testable, and efficient code by using software development best practices, • Demonstrate the ability to identify and fix errors in code, • Write various back-end services that can be leveraged by web designers to create web products, • Research new industry coding standards that can be used to improve the team’s ability to create secure, high-quality, high-performance applications, • Working knowledge of relational databases (Postgres, MS SQL, etc.) and optimizing database queries, • Working knowledge of GIS and similar mapping services extremely useful, • Understanding of web application security, session management, and code development best practices Education & Experience • Bachelor’s Degree in Computer Science, Information Systems, Business Technology, or a related field, • Experience with C# and .NET Core development using Visual Studio and other Microsoft development tools, • 10+ years minimum experience as a programmer writing both client and server-side components RouteSmart offers its employees numerous opportunities for professional development. Our goal is to provide our employees with the chance to learn and grow as the company grows. We recognize that our employees are our most valuable asset. The work they do is key to our ability to provide high quality service to our clients. We also recognize that our employees are unique individuals with their own lifestyle and interests. RouteSmart Technologies pays a significant share of the cost of benefits for our employees. We believe our investment makes good business sense by helping to create a positive and productive work environment. Among the benefits we offer are: • Medical/Dental/Vision/STD & LTD Plans, • Employer paid Life Insurance Plan, • Employee Training & Development, • 401(k) Retirement Savings Plan w/ Employer Match, • Vacation/Sick/Holiday Leave, • Tuition Reimbursement, • Flex hours, • Casual Dress RouteSmart Technologies is proud to be an equal opportunity workplace. Individuals seeking employment at RouteSmart Technologies are considered without regards to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, or sexual orientation. We do not accept resumes from headhunters, placement agencies, or other suppliers that have not signed a formal agreement with us. All candidates must have legal authorization to permanently live and work in the United States. This position does not qualify for sponsorship.

Job Description Job Summary We are seeking a motivated and detail-oriented Junior Software Engineer to join our dynamic development team. In this role, you will assist in designing, developing, and maintaining software applications while collaborating with senior engineers to enhance our technology solutions. This position offers an excellent opportunity for growth and learning in a fast-paced environment. Duties • Collaborate with team members to design and implement web and application development projects., • Participate in the full software development lifecycle, including requirements gathering, coding, testing, and deployment., • Write clean, maintainable code using languages such as C#, Java, and Ruby on Rails., • Assist in troubleshooting and debugging applications to ensure optimal performance., • Contribute to Agile development processes by attending daily stand-ups and sprint planning meetings., • Utilize version control systems like SVN for code management., • Bachelor’s degree in Computer Science or a related field is preferred but not required., • Familiarity with web development principles and application development practices., • Basic understanding of Quantum engineering concepts is a plus., • Proficiency in programming languages such as C#, Java, or Ruby on Rails., • Experience with Agile methodologies and version control systems (SVN)., • Strong problem-solving skills and the ability to work collaboratively within a team environment. Job Type: Full-time Pay: $60,000.00 - $70,000.00 per year Benefits: • Green card sponsorship, • On-the-job training, • Hourly pay

Job Description Senior Manufacturing Engineer About the Role: The Senior Manufacturing Engineer will lead the development and optimization of advanced manufacturing processes within an ISO 13485-certified environment. This role focuses on continuous improvement, lean manufacturing, and precision CNC machining to enhance product quality, reduce costs, and streamline operations. The position requires strong technical expertise, hands-on process leadership, and experience mentoring junior engineers in a fast-paced, high-precision production setting. Responsibilities: * Develop, implement, and optimize manufacturing processes to meet quality, efficiency, and regulatory standards. * Lead process validation, documentation, and improvement efforts in compliance with ISO 13485 and related quality systems. * Utilize lean manufacturing, continuous improvement, and 5S principles to enhance operational performance and reduce waste. * Evaluate and refine CNC machining operations, tooling design, and process flow for precision manufacturing. * Conduct cost estimation, process analysis, and capacity planning to support new and existing product lines. * Oversee the installation, testing, and maintenance of manufacturing equipment and production systems. * Mentor and train junior engineers, providing technical guidance and professional development support. * Collaborate with cross-functional teams to resolve production challenges and implement process improvements. * Ensure manufacturing practices adhere to safety, quality, and environmental regulations. * Identify and integrate automation and digital manufacturing technologies to drive process innovation. Qualifications: * Bachelors degree in Mechanical Engineering, Manufacturing Engineering, or a related technical discipline. * Minimum of 10 years of manufacturing engineering experience, with at least 5 years of continuous tenure at one organization. * Proven experience working in an ISO 13485-certified or other regulated manufacturing environment. * Expertise in CNC machining processes, tool design, and process optimization. * Demonstrated application of lean manufacturing, continuous improvement, and 5S methodologies. * Strong knowledge of CAD software, project management tools, and data-driven process control. * Exceptional analytical, problem-solving, and communication skills. * Proven ability to manage complex projects and lead cross-functional teams. * Commitment to quality, safety, and compliance in all manufacturing operations. Desired Qualifications: * Six Sigma Green Belt certification or equivalent process improvement training. * Experience mentoring and developing engineering talent within a manufacturing organization. * Familiarity with automation, robotics, and advanced manufacturing technologies. * Background in medical device manufacturing or other precision, high-regulation industries. * Strong record of driving measurable cost reductions, efficiency gains, and quality improvements. This position offers a competitive salary, comprehensive benefits, and the opportunity to lead impactful process improvements in a world-class, ISO-certified manufacturing environment.

Job Description Civil Engineer I – Long Island & New York City Location: Long Island & New York City Employment Type: Full-time Salary: $70,000-$90,000 - Commensurate with experience About Us Our firm is a forward-thinking professional services organization with a strong legacy of delivering high-quality, innovative engineering solutions. Our expertise includes civil, structural, transportation, bridge, environmental, landscape architecture, electrical, and mechanical engineering, as well as construction inspection. We are driven by a commitment to excellence, collaboration, and continuous growth—shaping better outcomes for our clients, colleagues, and communities. Position Overview We're looking for a motivated Civil Engineer I to support a wide range of exciting civil design projects. This role offers opportunities to collaborate with experienced engineers and gain hands-on experience in developing plans, specifications, and technical solutions for infrastructure and site development projects. What You'll Do * Perform design calculations and ensure compliance with applicable codes and regulations. * Prepare and review design and construction plans, specifications, cost estimates, and permit applications. * Collaborate with engineers, CADD technicians, and other team members to deliver high-quality results. * Conduct site visits to evaluate project conditions and coordinate with stakeholders. * Draft technical reports, design documentation, and project correspondence. * Participate in client and agency meetings and professional development events. What You'll Bring * Bachelor's degree in Civil Engineering or a related field (required). * 2–4 years of experience in civil design (consulting or professional services preferred). * Engineer in Training (EIT) certification required; PE licensure preferred. * Proficiency in Civil 3D; experience with site layout, grading, and utilities design. * Familiarity with stormwater design software (HydroCAD, HEC-RAS, or SWMM) preferred. * Excellent communication, organization, and multitasking skills. * Ability to travel up to 10% (occasionally on short notice). Why You'll Love Working Here • Competitive base salary and discretionary bonus plan. Comprehensive benefits package, including multiple healthcare plan options, dental coverage, life insurance, short- and long-term disability insurance, and 401(k) with immediate match and vesting. * Paid time off: 15 vacation days, 64 hours of sick time, and 9.5 paid holidays. * Additional perks like Flexible Spending Account (FSA), Employee Assistance Program (EAP), and more. This company is an Equal Opportunity Employer. All qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Description The Senior Building Controls Technician will provide services related to the expansion, upgrade or replacement of building automation hardware and software for smart building infrastructure. The position will work independently to meet project requirements with limited supervision. The programmer will be responsible for programming, configuring, and testing of Direct Digital Control (DDC) building automation and control systems. Responsibilities/Duties: * Design and engineer control system hardware and software programming based on project plans, specifications, and other contract documents * Ability to program projects with various levels of complexity * Capable of performing network troubleshooting, database troubleshooting and repair programming * Collaborates with the engineering team on the system configuration, network and software requirements, graphics, programming, and sequences of operations * Develop and configure the sequence of operations, programming, graphics, database, network, and integrations into third party systems * Maintains accurate and thorough project documentation and redlines * Provides owner training as required by the project * Executes system commissioning and functional testing * Assist in installation of control hardware * Startup and commission new hardware installations * Provide project management assistance on projects as required, interfacing directly to customers * Supervise sub-contractors and suppliers as needed * Help educate lower-level technicians through on the job training as needed Required Skills * Excellent verbal and written communication skills * Proficient in Microsoft Office Suite or related software * Programming skills * Strong analytical skills * Strong interactive and communication skills * Strong troubleshooting skills * Experience with electronics and basic electrical circuits * Thorough understanding of and ability to use appropriate tools * Excellent customer service and ability to work well with others * Knowledge of DDC Control Theory and Applications as related to HVAC equipment * Strong knowledge of common DDC communications protocols such as but not limited to BACnet, LON, Modbus, etc. Required Experience/Education * At least 5-10 years of experience with programming, startup and commissioning of control systems * Niagara N4 certification * Experience with multiple manufacturers of controls a plus * Technical knowledge with installation of controls equipment and ancillary devices Physical Requirements * Physically able to climb overhead or crawl under spaces to complete jobs. * Must be willing to work at heights. * Must be able to lift up to 35 pounds at times. Salary Range: $80,000-$110,000

Job Description Ranked the overall #9 Best Civil Engineering Firm (of any size) to Work for in the Nation and residing on the list of the Engineering News Record (ENR)’s Top 500 Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate is an entry level candidate with up to 3 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities may include, but are not limited to: • Preparation of trip generation estimates, roadway volume development, parking estimates, and analyses for their projects within the team., • Assisting in the analysis of field data, reports, maps, drawings, blueprints, tests, and aerial photographs to plan projects., • Obtaining, analyzing, and interpreting demographic and other regional transportation planning data., • Use of computer-assisted engineering and design software and equipment to prepare engineering and planning documents., • Assisting in the preparation or modification of planning documents, including transportation impact studies, and traffic operational analyses, for projects., • Assisting in the collection of field data., • Serving as onsite project representative., • Use of planning software and equipment to prepare engineering, design, and planning documents., • Responsible for job-specific quality system tasks as defined in the quality manual or handbook., • Responsible for other general office duties as may be assigned., • Collaborate with engineering and design teams to develop conceptual layouts for transportation improvements, including roadway access, pedestrian and multimodal facilities., • Prepare high-level design sketches, diagrams, and visualizations to support proposals, stakeholder presentations, and client deliverables. Job Requirements: • Bachelor’s Degree in Engineering, • Engineer in Training Certification Preferred, • Experience utilizing any or all of the following: Synchro, SimTraffic, Excel, AutoCAD/MicroStation (preferred but not required), • Aptitude for detail-oriented work assignments, • Excellent oral and written communication skills, • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite, • Valid Driver’s License Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public, and are dedicated to Moving Forward Together®

Job Description RouteSmart Technologies, a leader in vehicle route optimization software technology, is seeking a Cloud Engineer to join our IT Infrastructure & Security Department. This role will report directly to the Sr. Infrastructure & Security Engineer and is responsible for implementing, maintaining, and improving our cloud IT infrastructure, systems, and AWS environments. The Cloud Engineer will work closely with the DevOps and Product Development teams to ensure secure, scalable, and efficient cloud operations across our production and development environments. The typical base pay range for this position at the start of employment is expected to be between $120,000–$130,000 per year. RouteSmart Technologies, Inc. has different base pay ranges for different work locations within the U.S., and base pay will vary based on experience. This is a hybrid role; candidates must be able to commute to the office in Melville, NY or Columbia, MD. Candidates must reside within 50 miles and be available to work onsite several days per week. However, we will consider the right candidate for remote work if domiciled in one of the following states: Maryland, New York, Pennsylvania, DC, Virginia, Arizona, California, Colorado, Florida, Idaho, Illinois, Indiana, Minnesota, New Jersey, North Carolina, Oregon, South Carolina, Texas, Washington. Essential Duties & Responsibilities • Assist in researching, designing, and implementing secure, scalable, and cost-effective IT infrastructure, systems, security components, standards, and services., • Maintain, troubleshoot, and resolve issues related to infrastructure, systems, services, security, and accounts., • Continuously monitor the health and performance of the AWS infrastructure, systems, and accounts, identifying issues and implementing solutions for improved efficiency., • Analyze components, logs, services, and specific tools as needed., • Implement, enforce, and configure security policies, controls, services, identity management, and other security measures to protect from unauthorized access and cyber threats., • Stay up-to-date on technology trends and best practices, adapting to evolving cloud IT technologies and management approaches., • Communicate effectively and create accurate documentation of designs, configurations, processes, and procedures., • Collaborate closely with other team members on projects and tasks, ensuring seamless integration and support for IT initiatives., • 5+ years of experience with cloud infrastructure, systems, and security., • Minimum of 3 years of hands-on experience with AWS services., • Strong communication and collaboration skills., • Highly organized with strong analytical and problem-solving abilities., • Ability to work independently and as part of a team., • Commitment to continuous learning and delivering high-quality service. Education & Experience • Bachelor’s degree in Computer Science, Information Systems, Business Technology, or a related field—or equivalent experience., • Proficiency in IT infrastructure, networking, system administration, and security., • Solid experience with AWS services and concepts., • Experience with Infrastructure as Code (IaC) tools such as AWS CloudFormation or Terraform. RouteSmart offers its employees numerous opportunities for professional development. Our goal is to provide our employees the chance to learn and grow as the company grows. We recognize that our employees are our most valuable asset. The work they do is key to our ability to provide high quality service to our clients. We also recognize that our employees are unique individuals with their own lifestyle and interests. RouteSmart Technologies pays a significant share of the cost of benefits for our employees. We believe our investment makes good business sense by helping to create a positive and productive work environment. Among the benefits we offer are: • Medical/Dental/Vision/STD & LTD Plans, • Employer paid Life Insurance Plan, • Employee Training & Development, • 401(k) Retirement Savings Plan w/ Employer Match, • Vacation/Sick/Holiday Leave, • Tuition Reimbursement, • Flex hours, • Casual Dress RouteSmart Technologies is proud to be an equal opportunity workplace. Individuals seeking employment at RouteSmart Technologies are considered without regards to race, color, religion, national origin, age, sex, marital status, ancestry, physical or mental disability, veteran status, or sexual orientation. We do not accept resumes from headhunters, placement agencies, or other suppliers that have not signed a formal agreement with us. All candidates must have legal authorization to permanently live and work in the United States. This position does not qualify for sponsorship.

Job Description JOB DESCRIPTION: SUMMARY ABOUT THE ROLE: Precipart, located in Farmingdale, NY, is seeking two Supplier Quality Engineers (Levels I–II) to support New Product Introduction (NPI) and manage supplier quality across our global supply base. These roles involve supplier qualification, auditing, and part validations, offering opportunities to apply your skills, take on increasing responsibility, and grow within a collaborative, innovative environment. Join Precipart, a global leader in precision components, where innovation, collaboration, and quality drive everything we do.This role offers a structured career progression path with opportunities to advance from entry-level (Level I) through increasing responsibility (Levels II and III), based on demonstrated skills, performance, and leadership. Advancement is determined by proficiency in supplier quality engineering competencies, scope of responsibility, and the ability to work independently and lead cross-functional initiative. ESSENTIAL FUNCTIONS: * Perform supplier quality process in compliance with Precipart standards and other applicable regulations (e.g., ISO 13485, AS9100 and ISO 9001). * Qualify new suppliers in alignment with the Supply Chain and Sourcing teams. * Conduct supplier risk assessments and implement mitigation actions. * Monitor incumbent supply base performance (on-time delivery, quality performance, certification status, etc.). * Drive completion of supplier related nonconformances and corrective actions. * Establish and maintain supplier records and corrective action system files. * Prepare and execute company-wide supplier quality audits (remote and on-site) in accordance with internal procedures. * Develop and approve supplier validations of new products ensuring on-time and quality deliverables. * Support Manufacturing NPI projects in alignment with Quality Engineering. * Partner with Quality Systems & Quality Engineering to ensure compliance across all quality functions. * Assist in quality investigations with customers when a supplier is involved, tracking complaints through to satisfactory completion. * Identify and implement appropriate corrective actions to resolve concerns in line with ISO/AS, company, and customer requirements. * Stay current with best practices, trends, standards and share knowledge with team members. * Support customer and notified body audits as required. * Responsible for conforming with the Company’s quality management system requirements, as well as contributing to its overall effectiveness, and the ultimate goals of customer satisfaction, product compliance and ethical practices/behavior. REQUIRED EXPERIENCE / SKILLS / EDUCATION: * Bachelor’s Degree in Mechanical Engineering or related field. * Relevant internship, co-op, or 2+ years of engineering or quality experience. * Familiarity with supplier quality processes, including qualification, auditing, and part validations. * Ability to read technical drawings and understand tolerances, special characteristics, etc. * Must have excellent verbal, written, and interpersonal skills. * Strong problem solving and analytical ability. * Highly organized, detail-oriented, able to manage multiple priorities. * A self-starter with ability to work independently and in a team environment. * Proficient in Microsoft Office (Outlook, Word, Excel, Access, and PowerPoint). * Professional demeanor, strong work ethic, and dependabilityFlexible and adaptable to change with a forward-thinking mindset. * Domestic and international travel up to 20%. * Values treating people well, has an empathetic approach and mindset, is ambitious and strives for personal and collective excellence, supports diversity and inclusion, and has a positive outlook and attitude. Note:While this position is primarily targeted at Levels I & II, highly qualified candidates with significant experience and proven success in supplier quality may be considered for Level III responsibilities. PREFERRED EXPERIENCE / SKILLS / EDUCATION: * Master’s Degree in Engineering, Business Administration or another related field. * Certified Quality AuditorKnowledge of validation processes (IQ, OQ, PQ, PPAP). * Knowledge of quality core tools such as FMEA, 8D, MSASpeaks German and/or French. Pay Range: $75,000 to $90,000 annual salary. We welcome candidates of all experience levels to apply. The compensation for this role will be determined through our assessment process, taking into account your qualifications. What We’ll Offer You in Return: Base salary plus incentive program Paid time off (TOB, holidays, parental leave) Medical, dental, vision insurance Flexible Spending Account Health Savings Plan Life insurance, enhanced short term and long-term disability insurance and other voluntary insurance plans 401k Profit sharing plan Tuition Reimbursement Employee Referral Bonus National Employee Assistance Program 529 College Savings Program Professional development and training Brand new, modern workspace and manufacturing facilities Company events and outings, from Employee Appreciation Day to professional sports games Stable organization with opportunities for future growth within the company About Precipart: Precipart engineers, designs and manufactures high precision custom solutions for the world’s leading companies in the Medical, Aerospace and Industrial markets. We act as a partner across your entire manufacturing process by engineering precision gears, mechanical components, assemblies and motion control solutions, as well as delivering end-to-end capabilities and more. With offices in Switzerland, the U.S. and U.K, we are here to help you“engineer possible”. You should be proficient in: • Bachelor's Degree, • Continuous Improvement, • ISO 13485, • Advanced Product Quality Planning (APQP), • Supplier Management, • ISO 22000, • AS9100, • AS9102, • ITAR Compliance, • Engineering Degree, • Supplier Negotiation Experience, • CNC Automation Solutions, • CNC Swiss Lathe $36.06 - $43.27 / hr

Job Description JOB DESCRIPTION: SUMMARY ABOUT THE ROLE: Precipart, located in Farmingdale, NY, is seeking two Supplier Quality Engineers (Levels I–II) to support New Product Introduction (NPI) and manage supplier quality across our global supply base. These roles involve supplier qualification, auditing, and part validations, offering opportunities to apply your skills, take on increasing responsibility, and grow within a collaborative, innovative environment. Join Precipart, a global leader in precision components, where innovation, collaboration, and quality drive everything we do.This role offers a structured career progression path with opportunities to advance from entry-level (Level I) through increasing responsibility (Levels II and III), based on demonstrated skills, performance, and leadership. Advancement is determined by proficiency in supplier quality engineering competencies, scope of responsibility, and the ability to work independently and lead cross-functional initiative. ESSENTIAL FUNCTIONS: * Perform supplier quality process in compliance with Precipart standards and other applicable regulations (e.g., ISO 13485, AS9100 and ISO 9001). * Qualify new suppliers in alignment with the Supply Chain and Sourcing teams. * Conduct supplier risk assessments and implement mitigation actions. * Monitor incumbent supply base performance (on-time delivery, quality performance, certification status, etc.). * Drive completion of supplier related nonconformances and corrective actions. * Establish and maintain supplier records and corrective action system files. * Prepare and execute company-wide supplier quality audits (remote and on-site) in accordance with internal procedures. * Develop and approve supplier validations of new products ensuring on-time and quality deliverables. * Support Manufacturing NPI projects in alignment with Quality Engineering. * Partner with Quality Systems & Quality Engineering to ensure compliance across all quality functions. * Assist in quality investigations with customers when a supplier is involved, tracking complaints through to satisfactory completion. * Identify and implement appropriate corrective actions to resolve concerns in line with ISO/AS, company, and customer requirements. * Stay current with best practices, trends, standards and share knowledge with team members. * Support customer and notified body audits as required. * Responsible for conforming with the Company’s quality management system requirements, as well as contributing to its overall effectiveness, and the ultimate goals of customer satisfaction, product compliance and ethical practices/behavior. REQUIRED EXPERIENCE / SKILLS / EDUCATION: * Bachelor’s Degree in Mechanical Engineering or related field. * Relevant internship, co-op, or 2+ years of engineering or quality experience. * Familiarity with supplier quality processes, including qualification, auditing, and part validations. * Ability to read technical drawings and understand tolerances, special characteristics, etc. * Must have excellent verbal, written, and interpersonal skills. * Strong problem solving and analytical ability. * Highly organized, detail-oriented, able to manage multiple priorities. * A self-starter with ability to work independently and in a team environment. * Proficient in Microsoft Office (Outlook, Word, Excel, Access, and PowerPoint). * Professional demeanor, strong work ethic, and dependabilityFlexible and adaptable to change with a forward-thinking mindset. * Domestic and international travel up to 20%. * Values treating people well, has an empathetic approach and mindset, is ambitious and strives for personal and collective excellence, supports diversity and inclusion, and has a positive outlook and attitude. Note: While this position is primarily targeted at Levels I & II, highly qualified candidates with significant experience and proven success in supplier quality may be considered for Level III responsibilities. PREFERRED EXPERIENCE / SKILLS / EDUCATION: * Master’s Degree in Engineering, Business Administration or another related field. * Certified Quality AuditorKnowledge of validation processes (IQ, OQ, PQ, PPAP). * Knowledge of quality core tools such as FMEA, 8D, MSASpeaks German and/or French. Pay Range: $75,000 to $90,000 annual salary. We welcome candidates of all experience levels to apply. The compensation for this role will be determined through our assessment process, taking into account your qualifications. What We’ll Offer You in Return: Base salary plus incentive program Paid time off (TOB, holidays, parental leave) Medical, dental, vision insurance Flexible Spending Account Health Savings Plan Life insurance, enhanced short term and long-term disability insurance and other voluntary insurance plans 401k Profit sharing plan Tuition Reimbursement Employee Referral Bonus National Employee Assistance Program 529 College Savings Program Professional development and training Brand new, modern workspace and manufacturing facilities Company events and outings, from Employee Appreciation Day to professional sports games Stable organization with opportunities for future growth within the company About Precipart: Precipart engineers, designs and manufactures high precision custom solutions for the world’s leading companies in the Medical, Aerospace and Industrial markets. We act as a partner across your entire manufacturing process by engineering precision gears, mechanical components, assemblies and motion control solutions, as well as delivering end-to-end capabilities and more. With offices in Switzerland, the U.S. and U.K, we are here to help you “engineer possible”. You should be proficient in: • Continuous Improvement, • ISO 13485, • Advanced Product Quality Planning (APQP), • Supplier Management, • ISO 22000, • AS9100, • AS9102, • CNC Mill (3-4 axis VMC) (Haas), • CNC Automation Solutions, • CNC Laser Cutter, • CNC Lathe (2-4 axis), • CNC Waterjet, • CNC Router, • CNC Swiss Lathe, • CNC Grinder, • CNC Wire Bending Machine, • CNC Plasma Cutter, • CAD Software, • CAM Software, • CNC Mill (5+ axis VMC), • CNC Lathe (5+ axis)

Job Description The Project Engineer, with the assistance of the Project Team, coordinates all project activities to ensure cost, schedule, document control and quality standards are met. Under the direction of upper Management, the Project Engineer is expected to take on any/all tasks in the quest to learn the Electrical Construction Industry and the Company’s processes. Job Responsibilities: • Assisting with Design Work: Support more experienced engineers in designing electrical systems, components, etc. This may involve using software tools to create schematics, drawings, or models., • Documentation: Keeping accurate records and documentation is crucial in engineering. Entry-level engineers may be responsible for documenting their work, writing reports, and maintaining records of design specifications and test results., • Collaboration: Entry-level engineers often collaborate with other engineers, and project personnel from different disciplines to complete projects and solve problems., • Learning and Professional Development: Entry-level engineers spend time learning about the company's products, processes, and industry standards. They may also participate in training programs to enhance their technical skills and knowledge., • Fieldwork: Depending on the nature of the projects, entry-level engineers may have opportunities to visit job sites, participate in field installations, or assist in commissioning electrical systems., • Adhering to Codes and Standards: Entry-level engineers must familiarize themselves with relevant codes, standards, and regulations governing electrical design and installation to ensure that their work complies with legal and safety requirements., • Ability to work with a team., • Having organizational skills., • Ability to perform different tasks at the same time., • Having technical knowledge, • Ability to follow precise instructions., • Having IT skills with emphasis on Microsoft Office., • Being able to solve different types of problems., • Having good communication skills., • Being familiar with regulatory standards pertaining to the power industry., • Over 15 Years Owned and Operated, • Job training and mentorship, • Supportive Management Team, • Emphasis on professional development, employee satisfaction and work-life balance, • Competitive compensation packages, • Comprehensive benefits, • Paid holidays and vacation, • 401(k) match, • Medical Insurance, • Vision insurance, • Dental Insurance, • Union shopCompany DescriptionRMD Electric Corp. is an electrical contractor with over 15 years of experience in meeting the needs of our customers and is fully committed to giving our diverse New York City and Long Island clienteles prompt, consistently top quality electrical work designed to meet and exceed industry standards for safety and efficiency, regardless of the size or scale of the electrical work you need done. RMD Electric has successfully created an organization that values a working environment that embraces learning, transparency, and strong ethical behavior. At RMD Electric we believe that our greatest asset is our people and we are committed to establishing a structure for professionals to advance their careers. If you are looking to be a part of an inspiring, energetic and entrepreneurial environment, you found the right place.RMD Electric Corp. is an electrical contractor with over 15 years of experience in meeting the needs of our customers and is fully committed to giving our diverse New York City and Long Island clienteles prompt, consistently top quality electrical work designed to meet and exceed industry standards for safety and efficiency, regardless of the size or scale of the electrical work you need done. RMD Electric has successfully created an organization that values a working environment that embraces learning, transparency, and strong ethical behavior. At RMD Electric we believe that our greatest asset is our people and we are committed to establishing a structure for professionals to advance their careers. If you are looking to be a part of an inspiring, energetic and entrepreneurial environment, you found the right place.

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Dental insurance, • Health insurance, • Paid time off Location: Long Island, New York Company: Harlequin Design New York Inc. About Us: Harlequin Design New York Inc. is a leading design and fabrication agency specializing in innovative solutions across various industries. We pride ourselves on our commitment to quality, creativity, and collaboration, creating exceptional designs that exceed client expectations. Job Description: We are seeking a talented SolidWorks Engineer to join our dynamic team. The ideal candidate will have a strong background in 3D modeling and engineering design, with a passion for creating precise and functional products. You will work closely with our design and fabrication teams to bring concepts to life and ensure the highest standards of quality and performance. Key Responsibilities: • Develop and modify 3D models and technical drawings using SolidWorks., • Collaborate with engineers and designers to translate concepts into detailed designs., • Conduct feasibility studies and simulations to optimize designs., • Prepare and maintain documentation related to design specifications and revisions., • Assist in prototyping and testing to validate designs and improve performance., • Provide technical support during the fabrication process and address any design-related issues., • Stay updated on industry trends and advancements in CAD technologies.Qualifications:, • Bachelors degree in Mechanical Engineering, Industrial Design, or a related field., • Proficiency in SolidWorks; additional CAD software knowledge is a plus., • Strong understanding of engineering principles, materials, and manufacturing processes., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team-oriented environment., • Effective communication skills, both written and verbal.What We Offer:, • Competitive salary and benefits package., • Opportunities for professional development and career growth., • A creative and collaborative work environment., • The chance to work on diverse projects that make an impact.

Job DescriptionDescription: About GenServe GenServe, LLC is the nation’s leading independent provider of scheduled and emergency power generator maintenance, repair, and sales. We serve commercial customers across various industries throughout the United States. Headquartered in Plainview, NY—with branch offices in New Jersey, Pennsylvania, Illinois, Florida, California, and Texas—GenServe continues to accelerate its growth through organic expansion and strategic acquisitions. Established in 1990, GenServe has the largest team of EGSA-certified technicians in the Northeast and is expanding rapidly into new markets. Our robust service platform provides a one-stop shop for all commercial generator maintenance needs. Position Summary The Switchgear Technician will work directly with the Senior Field Engineer to support field and manufacturing wiring projects. This role includes hands-on tasks such as interpreting drawings, performing field and shop wiring, and executing smaller retrofit projects with minimal supervision. Key Responsibilities • Provide wiring support for field and manufacturing operations., • Assist the Field Engineer with interpreting drawings, and performing field and shop wiring tasks., • Execute smaller retrofit projects independently, with minimal supervision., • 2+ years minimum Switchgear/ATS/Generator Controller Experience required, • Strong knowledge and understanding of electrical systems and groupings., • Proficient in reading and interpreting electrical drawings., • General understanding of ATS (Automatic Transfer Switch), generator, and switchgear operation., • Familiarity with machinery and equipment used in field projects., • Understanding of mechanical, electrical, and control systems and how to apply them., • Basic knowledge of instrumentation is a plus., • Team-oriented with excellent communication skills., • Detail-oriented, organized, and able to manage tasks independently., • Customer-focused with a positive, solutions-driven attitude. We offer a competitive benefits package which includes medical dental and visions, 401k, development and training opportunities. Are you ready? Requirements: