Trabajos engineer in training en Yonkers, New YorkCrear alertas

Job DescriptionDescription: As a Maintenance Technician, you are responsible for the inspection, repairs, and maintenance of a variety of hotel systems and equipment. Our Maintenance Technicians are thorough professionals with a practical mind and attention to detail. The ideal candidate will be able to work on a team or alone and observe all health and safety guidelines. The goal is to maintain the buildings and common areas in the best possible condition. This position may require flexible scheduling availability. Requirements: Job Requirements: • Recognize, report, and correct potential safety hazards (broken doors or railings, fire hazards, etc.) and notify supervisors of any damages, deficits, and disturbances, • Complete basic plumbing, electrical, HVAC, carpet and tile floor maintenance and repairs, • Complete painting, minor roof repairs, and other exterior projects, • Complete pool and exercise room equipment repairs if necessary, • Ongoing involvement in preventative maintenance programs, • Check stocking levels of all consumables and replace when appropriate, • Work with Chief Engineer and Management team to identify and accomplish all technical and skilled related projects, • Prepares all necessary reports during each shift for the management team, • When required, report to Hotel in bad weather conditions for maintenance of Hotel's exterior (snow shoveling, ice melting, etc.) Job Qualifications: • Highly motivated team player with strong initiative and desire for achievement, • Must be effective in handling problems in the workplace including anticipating, preventing, identifying, and solving problems as necessary, • Ability to work well in stressful situations, • Ability to complete work orders on a timely basis, • Readily available and approachable for all guests while providing excellent guest service, • Ability and willingness to respond to emergency situations on short notice, • Responsible for knowing Hotel emergency procedures The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to stand, sit or walk for an extended period of time. While performing the duties of this job, the employee is regularly required to lift and/or move up to 10 pounds and frequently lift and/or move up to 25 pounds. The number of hours you will be scheduled to work during the week is variable and is based on guest occupancy, season, staffing and other factors. Island Hospitality is unable to guarantee a specific number of work hours per week. Training: Island Hospitality is committed to employee development and displays that commitment with a formalized training and development program providing a clear path for any employee with a desire and aptitude to thrive in the hospitality business. As team members join Island Hospitality from other organizations they too can build on that prior experience and find further growth opportunities within our company by utilizing the tools and resources offered. Team Member Wellness Program: How We Thank You For All You Bring To The Team Rewarding Benefits Package: • Healthcare including Medical, Dental, and Vision Insurance, • HSA & FSA plans available!, • Dependent care FSA, • Identity Theft Protection Insurance, • Commuter benefits including transit & parking, • Pet Insurance, • PTO and Payroll Incentives for Annual Wellness Exams, • Employee Assistance Program, • Wellness Subscriptions including access to gyms, financial planning, counseling, and legal services, • Paid Sick and Vacation Time, • Family Leave, • 401(k) Retirement plan - IHM Matches 100% up to 3% of your salary and an extra 50% on the next 2% of your salary. 401(k) is fully vested upon the first contribution Rewarding Hard Work: • Incentive based bonus program, • Free room nights at our hotels and employee discounts within your hotel brand, • Discounts for friends and family within your hotel brand, • Team Member recognition and bonus, • Discounted tickets to theme parks, musicals, movies, and more through Tickets at Work, • Career Growth through our in-house training program with a path personalized to your desired goals, • Referral bonus program to ANY of our locations Equal Opportunity Employer Island Hospitality uses E-Verify to confirm work authorization in all municipalities where it is required by law.

Job Description Embedded Engineer (Microprocessors) We are seeking a seasoned Electrical Engineer, embedded engineer to design and program complex electrical systems. Responsibilities: • Engineered and designed microprocessor-based, mixed-signal circuit boards for specialized products, • Developed C language embedded software for servos, ensuring smooth interaction with external systems., • Led the construction and testing of prototype circuits, providing guidance to design and technical teams., • Authored comprehensive product documentation, including user instructions, project logs, test reports, and design evaluations., • Collaborated with Manufacturing to facilitate product commercialization, manage bills of materials, and develop documentation and test fixtures., • A minimum of 8+ years of experience in electro-mechanical applications, • Strong theoretical background, • Proficiency in circuit board design, schematic generation, and PCB layout tools, • Expertise in open/closed-loop servo mechanisms, motor design, and inverter development., • Experience in power supply development and industrial process control., • Ability to multitask in a hands-on environment., • Proven ability to work effectively in team settings and independently., • Provides project management assistance for control systems as needed., • Microsoft Office products to perform engineering and project management tasks., • Ability to write routine reports and correspondence., • Effectively present information to top management, customers, and employees., • Apply mathematical operations to such tasks as determination of test reliability and validity, analysis of variance, correlation techniques, and factor analysis., • Ability to define problems, collect data, establish facts, and draw valid conclusions., • Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables., • Close vision, and color vision ability required, • Safely and effectively lift, carry, and move objects of varying weights., • Bending, stooping, reaching, balancing, standing, and walking, for extended periods and maintain the necessary physical dexterity and coordination., • Close vision, and color vision ability required, • Safely and effectively lifting, carrying, and moving objects of varying weights, • Bending, stooping, reaching, balancing, standing, and walking for extended periods and maintaining the necessary physical dexterity and coordination, • A dynamic, flexible culture, that promotes collaboration and professional/ personal growth of each team member., • To be a part of a well-established team that values hard work, innovation & knows the value of its people., • Coaching, mentoring helping team members realize their potential, aiding in defining goals and executing them., • We have an aggressive growth strategy; Making way for ample advancement opportunities to transition into operations and/or direct management., • Competitive base & bonus plan, • We have continuous training, and are firm believers that a strong, knowledgeable, well-trained staff is the reason we are at the top of our field, having continued success. We are, and work with clients that are equal opportunity employers and considers all applicants for positions without regard to race, color, religion, gender, sexual orientation, age, national origin, disability, veteran status, or any other protected status.

Job Description Senior Mechanical Engineer Electromechanical Systems and Industrial Machinery Employment Type: Full-Time Industry Focus: Electromechanical Equipment I Automation Systems I Industrial Manufacturing I Robotics I Custom Machinery I Food and Beverage I Packaging I Water and Wastewater I Processing Equipment A privately owned, highly respected manufacturer with over 50+ years of success delivering complex, high-quality custom and benchmark electromechanical systems for critical infrastructure. Seeking to add to our engineering team a seasoned professional to help us build custom machinery used across the food and beverage, water treatment, packaging, energy, and automation sectors. Every system is designed, fabricated, and assembled on-site in their U.S.-based facilities. A financially stable, customer-trusted, and operates with speed, precision, and integrity. With low turnover, strong leadership, and a tight-knit, collaborative team, this is a rare opportunity for a senior-level engineer looking to make a real impact. Why Work Here • A privately-owned, financially secure, stable organization with a bold growth plan, your contributions matter here, • Recession-resistant with a strong, diverse client base, • All manufacturing and engineering done on-site in the U.S., • Short lead times and fully integrated workflow, • Diverse vertical markets including food processing, automated packaging, and industrial systems, • Long-tenured team with low turnover and deep technical experience, • Real mentorship from senior engineers and technical leadership, • A collaborative, team-first culture that values craftsmanship, integrity, and innovation, • Competitive salary + performance-based bonuses, • Clear pathways for career advancement into operations, technical leadership, or project management, • Access to ongoing technical training and development resources, • Opportunities to work on meaningful projects that impact essential industries, • Flexibility, autonomy, and a culture where good ideas get traction What You Will Do • Lead the design and development of mechanical and electromechanical systems, • Engineer custom industrial machinery, motion systems, and integration for real-world automation, • Create detailed 3D CAD models and drawings using Autodesk Inventor, SolidWorks, and AutoCAD, • Play a key role in the transition to Autodesk Inventor as the core design platform, • Collaborate with sales, drafting, production, service, and R&D teams to ensure design feasibility and performance, • Attend Factory Acceptance Tests, system demos, and customer meetings, • Conduct hands-on testing and root cause analysis to solve engineering challenges, • Recommend improvements to enhance reliability, manufacturability, and cost-efficiency, • Generate full technical documentation including BOMs, manuals, and assembly instructions, • Provide limited on-site support for commissioning and validation, travel is minimal (0 to 2 percent) What You Bring to the Role • Experience designing electromechanical equipment, custom machinery, and automated systems, • High-level proficiency in Autodesk Inventor preferred, along with SolidWorks and AutoCAD, • Solid understanding of GD&T, tolerance analysis, mechanical fasteners, motion control, and pneumatics, • Familiarity with PLM systems and NPI workflows, • Hands-on background and mechanical aptitude is strongly valued. Candidates who enjoy working on cars, engines, machines, or DIY projects often excel here, • Strong communication and collaboration skills with the ability to present technical information clearly to both internal teams and clients, • Associate or bachelor’s degree in Mechanical Engineering or a related discipline, or equivalent hands-on experience, • Proficiency in Microsoft Office and collaboration tools like SharePoint and Microsoft Teams Nice to Have ~But Not Required While not required, familiarity with the following codes and standards is considered a plus: • ASME Section VIII for pressure vessel design and inspection, • ASME B31.1 and B31.3 for power and process piping, • ASME Y14.5 for geometric dimensioning and tolerancing, • ASME B16.5, B36.10M for flanges, pipes, and fittings, • ASME PTC 4 and PTC 46 for boiler and plant performance testing Traits That Help Engineers Thrive Here • Curiosity and a hands-on mindset, • Creative approach to solving practical engineering problems, • Ability to see the big picture while staying detail-oriented, • Integrity, loyalty, and a team-first attitude, • Enjoys challenging workflow, with fresh projects, • Adaptability in a fast-paced manufacturing environment Let’s Build What’s Next – Together If you’re driven by precision, purpose, and the challenge of making great ideas real, we’d love to hear from you. Looking forward getting to know you… We are as well as our client are an equal opportunity employer and welcome all qualified applicants regardless of race, gender, age, disability, veteran status, or other protected classification.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: This position is responsible to develop, implement and manage capital projects related to water and wastewater facilities including treatment upgrades, pump stations, lift stations, storage tanks, pipelines, and other related facilities, with a focus in electrical improvements. While this candidate would serve as the electrical lead for Veolia’s capital upgrades, they will also be expected to manage small projects in other areas as needed to support the utility’s capital plan and operations. Candidate will participate in and actively contribute to short and long-term system planning as assigned. Effectively manages consultants and contractors for project delivery. The candidate works closely with Engineering and Operations personnel, managing and coordinating program activities utilizing a cross-functional team approach. The candidate works to ensure Asset Owner satisfaction by delivering projects in accordance with the success criteria defined in the project plan (i.e. operational performance, budget, schedule, regulatory compliance, etc.) Primary Duties/Responsibilities: • Responsible for $6-$8M in capital projects annually, including conceptual design/development, coordination of pilot testing, development of the project plans and internal funding approvals., • Manage the project development, design (either internal or external) and construction of large and small capital projects in accordance with engineering guidelines and procurement policies. Support the oversight of construction management personnel to ensure timely completion of assignments, budget compliance, asset management documentation and adherence to applicable standards., • Ensure corporate Technical and Environmental Health and Safety/Security standards are incorporated into the design specifications., • Manage and report on project expenditures to ensure they are aligned with budget and prioritize projects based on available funding and risk assessment, • Coordinate with the master planning department to assure the focus of capital project planning meets the medium and long-term system needs., • Assist with developing analysis and reports to be provided to regulators, internal or external customers as required. Provide support as needed for Rate Case Filings., • Drive efficiency into project delivery through the monitoring of delivery metrics and utilization of alternate procurement and delivery methods., • Manage environmental and governmental permitting in coordination with local business unit staff., • Support the oversight of construction management personnel to ensure timely completion of assignments, budget compliance and adherence to applicable standards., • Drive efficiency into project delivery through the monitoring of delivery metrics and utilization of alternate procurement and delivery methods., • Participate in master planning efforts of existing systems and new acquisitions (water and wastewater). Prepare short-term and long-term capital improvement plans for new acquisitions and prepare valuations of systems based on due diligence site visits and condition assessments to assist with the formulation of bids for acquisitions., • Participate in the development of engineering design and delivery processes and standards., • Provide technical expertise on engineering and operational issues and support facility condition assessments for our water/wastewater operations., • Successful candidates must be willing to travel to the various business unit sites as per job requirements., • Job sites generally located within a 30 mile radius of the local office with the occasional requirement for sites that are a longer distance.Qualifications Education/Experience/Background: • Bachelor’s Degree in Electrical Engineering or related field, commensurate experience may be considered, • Minimum 10 years of experience managing electrical design, MEP design, or construction projects and five (5) years of experience managing water/wastewater-specific projects including electrical upgrade projects for treatment plants, and pumping stations, • Strong project management skills (initiating, planning, executing, monitoring, controlling and closing)., • Thorough working knowledge of electrical equipment associated with water infrastructure, including but not limited to transformers, generators, motor control centers, variable frequency drives, substations, capacitors, transfer switches, and both high and low-voltage equipment. MEP experience a plus., • Working knowledge of water and wastewater process applications preferred, • Superior personal effectiveness skills, visible “leadership by example” utilizing participative management involving employees and teamwork whenever possible., • Strong communication, presentation and reporting skills., • Experience utilizing alternate project delivery methods (design-build, integrated project delivery) and contracting methods (guaranteed maximum price, reimbursable), • Computer skills (MS Project, Google Suite, Oracle PeopleSoft, Oracle Hyperion or other planning/performance/budgeting tools a plus)., • Professional Engineer License (PE). Additional Information Pay Range: $125000 to $135000 per hour. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 15% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description About Network Doctor Network Doctor is a premium IT Managed Services Provider delivering technology support and strategic guidance to clients across industries such as finance, healthcare, real estate, and professional services. We pride ourselves on a culture built on teamwork, curiosity, professionalism, and personal growth — all with the mission of making IT an enabler that helps businesses work smarter, faster, and happier. At Network Doctor, you’re not just a technician — you’re part of a team grounded in partnership, integrity, and continuous improvement. You’ll have a voice in a culture that values your curiosity and success, the satisfaction of representing a respected MSP onsite with high-profile clients, the support of a strong engineering network, and abundant opportunities for training and professional growth. About the Role We are seeking a smart, resourceful, and service-oriented L2 Support Engineer to provide advanced remote technical support for clients across the NYC Metro Area. This role is a key escalation point within our Help Desk, responsible for resolving complex issues, guiding L1 engineers, and ensuring an exceptional customer experience with every interaction. You’ll spend most of your time working from our Englewood Cliffs, NJ office delivering hands-on troubleshooting, system administration, and higher-level support across a wide range of technologies. While the role is primarily focused on escalations and remote service delivery, there may be occasional opportunities to assist with onsite visits when required, reflecting the collaborative nature of working within a Managed Services Provider environment. As a member of Network Doctor’s Help Desk team, you’ll be supported by a full group of engineers, system specialists, and senior escalation resources, ensuring you’re never on your own when tackling unfamiliar or challenging issues. This position requires professionalism, adaptability, and the ability to navigate complex technical environments with confidence and curiosity. You don’t need to know everything, but you do need to know how to investigate effectively, ask the right questions, and collaborate with your team to drive successful outcomes. Key Responsibilities: • Proficient at managing and maintaining:, • Enterprise networks and systems, including hardware, • Window Servers, Active Directory, GPOs, Hybrid Connectors, Conditional Access Polices, • Secure and redundant infrastructures, i.e. AV, firewalls, GPO, high-availability solutions, • Microsoft IaaS PaaS and SaaS offerings (Azure, 365, Entra/Intune, MDM/MAM), • Email security/filtering solutions, • Mac, • Some other technical facets, details or requirements of the position may include, but not limited to:, • Work in conjunction with Project Engineers to meet deadlines and client expectations., • Configure & manage Microsoft Server & Exchange Servers with PowerShell expertise., • Install, configure, and troubleshoot all network equipment, routers, firewall, switches, wireless access points, and SSL-VPN setups from various vendors, such as Cisco, Extreme, HP, Meraki, Netgear, SonicWALL, UniFi., • Manage Disaster Recovery and standard backup file restoration requests and support using Veeam, Azure Backup, SkyKick, Carbonite and others., • Diagnose and resolve unique, nonrecurring problems associated with application software and operating systems; determine the source of problems and classify their level, priority and nature., • Work with hardware and software vendors to verify timely product delivery and ensure that new equipment is installed and ready to operate on schedule., • Document procedures, standards, best practices configurations, settings, installation sequences and back-out instructions. Requirements: • Strong verbal and written communication skills, • Substantial experience with Windows Servers, • Strong understanding of fundamental networking concepts (switching/routing, DNS/DHCP, RADIUS authentication, WAP management, Email security protocols), • Strong experience managing and troubleshooting Microsoft Windows OS technology including AD Forests, Domains, Trusts, DNS, DHCP, Group Policy and Organizational Units, • Excellent interpersonal, customer service and problem-solving skills, • Strong time management and organizational skills with the ability to manage multiple tasks and changing priorities, • Ability to work collaboratively within a team A Plus to Have: • 2 + years technical experience relevant to the above, • A solid and well thought out diagnostic mindset, • Physical ability to lift and move heavy equipment (servers, computers, etc.), • Experience working with/at MSP’s, • Experience with RMM tools, • Familiarity with the ConnectWise Suite of products, • Proficiency in administering, configuring, maintaining and upgrading various VMware technologies, • Proficiency in administering, configuring, maintaining, and upgrading Citrix XenApp & XenDesktop environments, • Administering and configuring NAS and SAN technologies from various vendors, • A driver’s license and vehicle of your own and the ability to travel to client locations if needed

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of the Director of Engineering, the incumbent will be primarily responsible for the engineering work for Veolia Water. He/She will have the ability to design and manage a variety of projects that range from water main installation, tank design, well rehabilitation and pump design, but the primary focus will be on refurbishment or replacement of the underground infrastructure. He/She will manage design, construction, budget and schedule for approximately $8M of improvements per year. Primary Duties/Responsibilities: • The Engineer will oversee the design and management of a variety of capital projects in the Weschester office., • Generate technical specifications and contract documents., • Manage contractors, consultants, project tasks, schedule & budget., • Ensure accurate technical performance and timely completion of project engineering design, plans details, studies, specifications and contract documents., • Proactively explores, evaluates, and implements new technologies as needed to improve operations.Qualifications Education/Experience/Background: • Bachelor’s degree in Civil Engineering., • 4 plus years Engineering experience., • Excellent analytical, organizational, computer and interpersonal skills., • Experience in managing a variety of projects and adhering to schedules., • Proven record of managing increasingly complex projects., • Ability to manage projects and adhere to budgets., • Abilities to set daily priorities and work schedules., • Ability to interface with all levels of staff and management., • Exercise discretion and independent judgment., • Professional Engineering License in New York State preferred. Additional Information Pay Range: $110000 to $120000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off. Eligible for up to 10% Annual Performance Bonus. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job Description Job Title: System Application Engineer Job Description: Hanwha Vision America seeks a highly experienced System Application Engineer to join our support team. In this position, you’ll be responsible for post-sales incidents and problem escalation, focusing on identifying root causes and providing resolutions in complex environments. You’ll also ensure proper testing, documentation, and deployment of workarounds and fixes, in addition to training the support team on how to resolve related incidents in the future. Key Responsibilities: • Technical, • Reproduce, document, and report product issues escalated from technical support or Field Applications Team to Product Managers, • Writing Sample required, • Test, document, and deploy workarounds for fixes in development, • Update and manage the issue log, • Own complex support cases for business-critical customers, • Training, • Serve as Subject Matter Expert regarding the Hanwha Vision product line,, • Providing Product training to the Technical Support Team, focusing on best practices in troubleshooting and product configuration Requirements: • Previous Experience in customer/end-user-facing roles, • Korean Language required, • Ability to travel on short notice. Travel (15-25%), • Excellent understanding and troubleshooting capabilities of intricate network-based security systems, • Proven Aptitude in Root Cause Analysis, • Excellent ability to communicate complex ideas both verbally and in writing, • Certifications in, • CCNA/CCNE/Network +, • Linux +, • ASW or other Cloud Certification, • In-depth knowledge of Incident and Problem management, • Self-motivated and proven time management capabilities, • 3-5 years’ experience supporting IP-based security systems or a related industry preferred

Job Description Product Sales Engineer Engineered Equipment | Capital Machinery | Processing & Water Treatment Industries Drive Innovation. Empower Solutions. Engineer Growth. We are seeking a Product Sales Engineer to join our high-performance team supporting the sales and application of custom and benchmark electro-mechanical equipment across industries such as food & beverage, packaging, and water/wastewater treatment. This role bridges the gap between engineering and sales—combining technical expertise, client engagement, and commercial strategy to support field sales teams, drive customer satisfaction, and grow market share. Who You Are: You’re a technically savvy professional with a background in equipment manufacturing, Packaging, Food & Bev, process systems, or water treatment solutions—ready to leverage your knowledge into consultative sales support. You enjoy collaborating across departments, mentoring others, and solving problems creatively. Preferred Backgrounds: • Electro-mechanical systems, • Capital equipment (packaging, processing, filtration, or automation), • Water/Wastewater systems, • Process equipment for industrial or municipal markets Degree preferred: Mechanical, Electrical, Chemical, or Systems Engineering (Associate or Bachelor’s level), or equivalent technical experience. Key Responsibilities Technical Sales Support • Partner with Field Sales Representatives to analyze customer requirements, recommend solutions, and configure systems that align with performance and budget goals., • Serve as the subject matter expert for specialized equipment and develop competitive product positioning., • Assist in proposal development, quote generation, and pricing strategy for complex systems., • Mentor and train Field Sales Representatives in product capabilities, sales strategies, and competitive differentiators., • Analyze industry trends and competitive data to help identify market opportunities and enhance sales strategy., • Maintain accurate, professional documentation of sales activities, client communications, and engineering support., • Provide feedback to product development and marketing teams to drive continuous improvement. Qualifications • 3–5+ years of experience in technical sales, application engineering, or product management within a capital equipment or electro-mechanical manufacturing environment., • Strong understanding of custom machinery or engineered system design., • Familiarity with CAD platforms, CRM systems (e.g., Salesforce or HubSpot), and project tracking tools., • Demonstrated success supporting or leading complex sales engagements., • Excellent communication, problem-solving, and customer relationship-building skills., • Willingness to travel (up to 5%) and perform light hands-on tasks as needed for product demos or events. What We Offer • A collaborative culture where engineering and innovation are celebrated., • Competitive base compensation + performance bonuses., • Ongoing training and development programs to support your professional growth., • Mentorship opportunities and a path to advance into senior technical, sales, or operational leadership roles., • A team-first environment where your ideas and expertise are valued. Be Part of Something Bigger If you thrive in a solution-driven environment and are ready to contribute your technical talent to a company that builds world-class systems for critical industries—this is the opportunity for you. We are an equal opportunity employer and welcome applicants from all backgrounds and experiences.

Job Description At E Tech Group, joining our team means joining a group of passionate and forward-thinking experts. We're one of the largest engineering and system integration firms in the United States providing value for our clients through IT automation and control solutions for more than 30 years to the Life Sciences, Mission Critical, Metals & Mining, Warehousing & Distribution, and CPG/Food & Beverage industries. Our national scale allows us to help our clients develop and implement standardized solutions at any of their facilities regardless of physical location or the local resources available at that site. The Senior Controls / Automation Engineer role requires an individual have a diverse engineering skill set with the ability to work independently to perform all aspects of process automation engineering and system integration, including initial concepts, specifications, design engineering, documentation, project implementation, testing, startup, and training of operating and maintenance personnel. You will be a key member of a diverse team of professionals developing solutions for our client's most complex automation challenges. Location: Regional Southern CT / Tarrytown area travel to sites You will: • Lead or work on a project team responsible for the design, configuration, and testing of continuous and batch control applications., • Understand the project scope and financials and exercise good time management skills to plan & coordinate the work as part of a project team by developing project schedules and budgets in collaboration with project leadership and identify change orders and justify changes to Project Management ensuring completion of all project deliverables to the satisfaction of the client., • Anticipate and provide solutions to project leadership and/or customer giving high priority to customer satisfaction offering strong technical expertise and advisement as part of the project team., • Adapt to a flexible work schedule & travel, if necessary, to participate in the design, development, and start-up of control systems at the client's facility., • Act as an automation Subject Matter Expert, • Hands on experience executing automation projects for process plants, minimum of 3-5 years in industry, preferably in Life Sciences domain., • BS Engineering degree or equivalent educational background, • Detail oriented with strong technical aptitude and desire for learning new technologies, • Knowledge of industry and regulatory standards, design criteria and codes relevant to Instrumentation and Controls, • ISA S88 Batch standard, • ISA S95 Controls System Architecture standard, • GAMP 5 & cGMP, • 21 CFR Part 11, • Demonstrated ability to develop process control system applications, utilizing Programmable Logic Controllers (PLC), Human Machine Interfaces (HMI), and Supervisory Control and Data Acquisition (SCADA) Systems, configuration of thin client server applications, design, developing & maintaining databases for data collection, configuring process historians and using reporting tools to present process data to operations & management, tuning control loops, providing control system startup services, troubleshooting existing control systems and providing control system qualifications., • Solid understanding of object-oriented software development & delivery methodologies, • Expertise with the design, implementation, maintenance and troubleshooting of virtual server-based control system architectures, and understanding of control system network topology, i.e. Ethernet, Ethernet/IP, ControlNet, DeviceNet, etc., • Knowledge of process instrumentation specification, installation & troubleshooting, and control panel design, check-out, commissioning & troubleshooting, • Hands-on experience rapidly troubleshooting and solving equipment & instrument-related issues during start-up and commissioning and perform complex system testing, • Experience working at customer sites supporting the installation & commissioning of equipment and systems., • PLC Programming with Rockwell Studio5000, RSLogix5000, • Ability to program in RLL, SFC and ST, • Plant Pax module definition is required, • 401k + match + prompt enrollment. E Tech Group employees are 100% vested upon entry., • Prompt enrollment into Medical, Dental, and Vision benefits., • Generous paid time off that includes paid vacation, paid holidays, paid family leave and sick time off.

Job Description Job Title: MES Engineer Job Summary: Full-time position as a Manufacturing Systems (MES) engineer. Under the general supervision of the IT Director/Manager, provides technical assistance in the use of administrative computing systems including MS/Oracle SQL, Windows Server Systems, IT infrastructures, as well as various reports to multi-cultural groups in multi-language (Korean). The specialist will learn knowledge of manufacturing systems while also providing technical assistance as described. Characteristic Duties and Responsibilities: • Assist in writing reports to various groups in multi-language (English/Korean), writing supporting documentation through SQL queries/ system provided reports., • Assist project teams in providing systems analysis and coordination in support of major system implementation., • Provide clear and professional verbal, written, and electronic communications amongst IT members, IT systems vendors, multi-cultural groups, and the end-user community. This includes preparing routine status reports, procedural guides, technical advice, and recommendations., • Meet and exceed end-user service requirements for maximum performance, stability, and reliability by daily monitoring and tuning existing Enterprise systems., • Provide recommendations for hardware (IT/Manufacturing) and software as requested. This will be achieved by gathering end-user requirements, analyzing existing systems, researching vendor specifications, and then reporting and presenting to IT team members as appropriate for further review., • Provide training & technical supports to end users on use of new/existing global systems., • Work collaboratively with Automation (PLC Control Engineers) for troubleshooting/improvements between manufacturing related systems and related equipment., • Identify and troubleshoot in a timely manner when system issues occur through DB access/In-house Interface programs related/connected with manufacturing equipment, • Perform other related duties as required. Minimum Qualifications: • Related Bachelor's Degree; or 3 years related experience and / or training; or equivalent combination of education and experience, • Strong troubleshooting methodology is required, • Possess a broad knowledge of servers along with operating systems, • Good customer service skills, communication, work independently and have interpersonal skills. Preferred Qualifications: • Possess a broad knowledge of MES. - Microsoft Certification, • Understanding of MS Office and other standard software, • Understanding of Active Directory and Windows System Infrastructures, • Bilingual as English and Korean fluency a plus Travel Required < 10%

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of Manager of New Business, this person will develop, implement and manage capital improvement projects for transmission, distribution and treatment systems, including preliminary concept development, detailed engineering design, cost-estimations, bidding, construction supervision, start up process, as-built plans, refunds calculations, easement agreements and O&M manuals for all New Business Projects. Responsibilities will include capital project delivery from inception to completion, including preliminary conceptual development, detailed engineering design with support of external engineering consultants; construction cost estimation, procurement, construction administration, supervision and inspection, startup and commissioning, and project closeout documentation delivery, including as-built plans. The Project Manager will mainly manage all New Business projects for the Hackensack/Franklin Lakes system. Incumbent will also assist with New Business projects in the Highlands systems located in Passaic and Sussex Counties, in New Jersey as needed. This position will work on both water and wastewater networks; however, the majority of projects and responsibilities are in water. The most critical and unique aspect of this role involves managing complex coordination among diverse internal and external stakeholders and translating Veolia’s technical requirements to developers and contractors. Primary Duties/Responsibilities: • Manage complex coordination among diverse internal and external stakeholders., • Main point of contact for developer-funded main extensions and complicated service installations., • Translate Veolia’s technical requirements to external stakeholders - developers and contractors., • Prepare preliminary, engineering, and detailed cost estimates., • Project budget development and cost tracking and expenditure forecasting. Track and report on project expenditures to ensure they are aligned with budget and prioritize projects based on available funding and risk assessment., • Manage several projects simultaneously ranging in scope from small to very large., • Prepare bid documents and coordinate procurement with supply chain management (SCM) department., • Prepare material requisitions forms (MSRs)., • Prepare funding projects and updating asset data base for newly created assets., • Manage pipe condition assessment projects., • Provide engineering support (on and off-site) during emergencies and large main breaks and other emergencies., • Mainly manage New Business Department new extensions projects., • Communicate regularly in written form (email, memoranda, reports, status updates, etc.) and verbally (group meetings, virtual calls, internal presentations, external presentations)., • Prepare refund calculations for developer-funded water main extensions., • Track developments for annual master permit updates., • Review / approve all fire suppression calculation reports associated with any new or enlarged fire service., • Work independently to manage all capital programs and specific projects for the New Business Department. Work directly with the Operations and T&D group to understand their needs in meeting operational, compliance, and health & safety goals., • Manage the design (either internal or external) and construction of small and large New Business Engineering projects., • Provide support to the Director of Engineering & Manager of Network Engineering and the Rates Department as needed during the preparation of the rate case filling, DSIC filing as well as responding to the rate case and DSIC interrogatories., • Assist the Director of Engineering & Manager of Network Engineering in developing analysis and reports to be provided to regulators, internal or external customers as required.Qualifications Education/Experience/Background: • Bachelor’s Degree in Civil/Environmental Engineering., • Strong experience and expertise in Network Engineering utility projects and project management is required for this role., • Experience in managing Network Engineering utility projects projects., • Experience in managing and adhering to project budgets and schedules., • 6 years + of engineering experience in related field., • ESRI/GIS, PowerPlan, INFOR/Hexagon experience is a plus., • Hydraulic Modeling experience is a plus., • Possesses broad knowledge of multiple processes and/or engineering disciplines, augmented with good experience and seasoning, to the point where he/she can address complex projects or address complex challenges, such as leading a response to an emergency., • Must be able to propose capital projects, or identify other work that will benefit VEOLIA and/or its customers, based on their expertise in one or more areas., • Excellent analytical, organizational, computer and interpersonal skills., • Exercise discretion and independent judgment., • Professional Engineer (PE) License is a plus., • Project Management Professional (PMP) Certification is a plus. Additional Information Pay Range: $95000 to $105000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 10% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of Manager of New Business, this person will develop, implement and manage capital improvement projects for transmission, distribution and treatment systems, including preliminary concept development, detailed engineering design, cost-estimations, bidding, construction supervision, start up process, as-built plans, refunds calculations, easement agreements and O&M manuals for all New Business Projects. Responsibilities will include capital project delivery from inception to completion, including preliminary conceptual development, detailed engineering design with support of external engineering consultants; construction cost estimation, procurement, construction administration, supervision and inspection, startup and commissioning, and project closeout documentation delivery, including as-built plans. The Engineer will mainly manage all New Business projects for the Hackensack/Franklin Lakes system. Incumbent will also assist with New Business projects in the Highlands systems located in Passaic and Sussex Counties, in New Jersey as needed. This position will work on both water and wastewater networks; however, the majority of projects and responsibilities are in water. The most critical and unique aspect of this role involves managing complex coordination among diverse internal and external stakeholders and translating Veolia’s technical requirements to developers and contractors. Primary Duties/Responsibilities: • Manage complex coordination among diverse internal and external stakeholders., • Main point of contact for developer-funded main extensions and complicated service installations., • Translate Veolia’s technical requirements to external stakeholders - developers and contractors., • Prepare preliminary, engineering, and detailed cost estimates., • Project budget development and cost tracking and expenditure forecasting. Track and report on project expenditures to ensure they are aligned with budget and prioritize projects based on available funding and risk assessment., • Manage several projects simultaneously ranging in scope from small to very large., • Prepare bid documents and coordinate procurement with supply chain management (SCM) department., • Prepare material requisitions forms (MSRs)., • Prepare funding projects and updating asset data base for newly created assets., • Manage pipe condition assessment projects., • Provide engineering support (on and off-site) during emergencies and large main breaks and other emergencies., • Mainly manage New Business Department new extensions projects., • Communicate regularly in written form (email, memoranda, reports, status updates, etc.) and verbally (group meetings, virtual calls, internal presentations, external presentations)., • Prepare refund calculations for developer-funded water main extensions., • Track developments for annual master permit updates., • Review / approve all fire suppression calculation reports associated with any new or enlarged fire service., • Work independently to manage all capital programs and specific projects for the New Business Department. Work directly with the Operations and T&D group to understand their needs in meeting operational, compliance, and health & safety goals., • Manage the design (either internal or external) and construction of small and large New Business Engineering projects., • Provide support to the Director of Engineering & Manager of Network Engineering and the Rates Department as needed during the preparation of the rate case filling, DSIC filing as well as responding to the rate case and DSIC interrogatories., • Assist the Director of Engineering & Manager of Network Engineering in developing analysis and reports to be provided to regulators, internal or external customers as required.Qualifications Education/Experience/Background: • Bachelor’s Degree in Civil/Environmental Engineering., • Strong experience and expertise in Network Engineering utility projects and project management is required for this role., • Experience in managing Network Engineering utility projects projects., • Experience in managing and adhering to project budgets and schedules., • ESRI/GIS, PowerPlan, INFOR/Hexagon experience is a plus., • Hydraulic Modeling experience is a plus., • Strong experience and expertise in Network Engineering utility projects and project management is required for this role., • Possesses broad knowledge of multiple processes and/or engineering disciplines, augmented with good experience and seasoning, to the point where he/she can address complex projects or address complex challenges, such as leading a response to an emergency., • Must be able to propose capital projects, or identify other work that will benefit VEOLIA and/or its customers, based on their expertise in one or more areas., • Excellent analytical, organizational, computer and interpersonal skills., • Exercise discretion and independent judgment., • Engineer in Training certificate is a must., • Project Management Professional (PMP) Certification is a plus. Additional Information Pay Range: $70000 to $80000 per year. Benefits: Veolia’s comprehensive benefits package includes paid time off policies, as well as health, dental, vision, life insurance, savings accounts, tuition reimbursement, paid volunteering and more. In addition, employees are also entitled to participate in an employer sponsored 401(k) plan, to save for retirement. Pay and benefits for employees represented by a union are outlined in their collective bargaining agreement. Sick leave – 56 hours; Observed Holidays – 11 days; Vacation – Flexible Time Off Eligible for up to 5% Annual Performance Bonus We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

Job DescriptionSr. Azure DevSecOps Engg. Location - NJ Need 2-3 days onsite ( Hybrid ) . Need candidates only with 12 + years experience . No H1B Transfer Candidates OR OPT/CPT This is a DevSecOps Role and not DevOps. Strong Azure Services, SAST/DAST , GitHub, Kubernetes, AKS , Terraform and Python Scripting experience is required. Our client is seeking a highly skilled DevSecOps Engineer to design, build, and maintain secure and scalable CI/CD pipelines for application and database deployments. Key Responsibilities: Design and maintain CI/CD pipelines for applications and databases using tools such as Azure DevOps, Jenkins, Smart City, GitLab CI, or GitHub Actions. Automate infrastructure provisioning and configuration management using tools like Terraform, Ansible, or Helm. Integrate automated testing frameworks (junit, Slenium etc) and code coverage tools (e.g., SonarQube etc). Embed static and dynamic security scanning tools (SAST/DAST) into pipelines. Implement and monitor database CI/CD workflows for version-controlled schema migrations. Ensure secure secrets management using Azure Key Vault. Continuously monitor pipeline performance and enforce compliance, code quality, and security policies. Collaborate with application and database developers to optimize release strategies and rollback mechanisms. Conduct incident response drills, threat modeling, and vulnerability assessments within CI/CD contexts. Document DevSecOps processes and provide training to development teams on security and best practices. Required Skills & Experience: Proven experience with DevSecOps practices and tools. Proficiency in CI/CD platforms like Azure DevOps, Smart City, GitHub Actions, GitLab CI, or Jenkins. Solid understanding of cloud platforms (Azure, ). Experience with IaC tools like Terraform, CloudFormation. Strong background in code testing frameworks and code quality tooling (JUnit, SonarQube, etc.). Hands-on with database CI/CD, schema versioning, and database migration practices. Experience with containerization (Docker) and orchestration (Kubernetes, AKS). Familiarity with secure coding principles and compliance standards. Strong scripting skills in Python, Bash. Preferred Qualifications: Certifications: Azure DevOps Engineer. Experience with monitoring and observability tools. Experience in multi-cloud or hybrid-cloud DevSecOps pipelines. Familiarity with data masking, auditing, and encryption in the database CI/CD context. Flexible work from home options available.

Job Description BASIC FUNCTIONS Quality Engineer will provide support to the Sr. Director of Quality Compliance in maintaining a strong overall Quality Compliance Program including the Quality Management System. The core focus shall be technical reviews implemented and established for each Department. This individual has the responsibility and authority to carry out all assigned tasks. SPECIFIC DUTIES • Ensures customers’ technical requirements are met by reviewing process procedures, test procedures, and supplier / Internal quality manuals to understand the scope and testing requirements, • Ensures products meet the organizations and customers quality and product integrity requirements., • Supports process development or operations team by providing analysis and expertise throughout the inspection & testing process., • Counsel and advise Sales personnel on technical developments or nonconformances (drawings, capabilities, etc.), • Advise Sales and Operations leadership on capability/capacity for certain types of orders, products, etc., • Enforce CTG Quality Planning including product sampling., • Support RFP/RFQ/Contract reviews – quality and technical review, • Conduct routine Material Review Board & Counterfeit Review Board actions and provide resolution/disposition, • Responsible for reviewing and submitting CTG requests for designated Airworthiness Rep 8130’s, • Maintain and retain a working list of qualified ASA-100/FAA AC 00-56 trained Inspectors/Technicians., • Oversight of the DQR (Designated Quality Representative) program for Sikorski, Lockheed, GDLS, and UTC. Utilizing First Article / First Piece development per AS9102, • Conduct sampling reviews of contract to shipped product(s), such audits shall be documented, • Ensuring equipment Preventative Maintenance and Calibration requirements are established and followed., • Develop and implement HAZMAT protocols including handling and disposition, • Identifies root causes of problems in the inspection process; recommends and/or implements corrective measures., • Champions Lean-Six Sigma methodologies within the organization; responsible for organizations’ 5S program and identifies and leads projects focused on reducing waste and increasing quality, • Ensure Return Material Authorization process is reviewed and documented, authorize approval as required per process., • Identify requirements for product(s) reviewed at CTG for potential Reach/RoHS specifics, • Manage and Enforce ESD S20.20 requirements within critical zones., • Review all Return to Vendor items for adequacy prior to material leaving facility, process all requirements within EPDS., • Disposition all discrepant material, determine (based on RMA/RTV) scrap rates, rework rates and return to stock., • Serve as backup to Senior Director of Quality Compliance for conditional quality plan approvals and conditional supply-chain activation approvals., • Collect and Analyze quality information for the development of quality strategies and continuous improvement plans, • Performs other duties as assigned. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC – Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts – Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES • Audit Findings (Reference QMR outputs), • FAI completion rates (M/Y, Quantity and per customer) Avg. process time/capacity, • Conditional Quality plannings (M/Y – Type, product specific, processing time), • RMA & RTV Data, Including DM Rates (Scrap, Rework, etc.) EDUCATION / EXPERIENCE / COMPENTENCY Bachelor’s degree in industrial engineering or related discipline required. • Certified Quality Engineer or equivalent, • ESD Program Manager preferred, • Approximately 0-4 years of experience, • Excellent interpersonal skills with ability to serve as a liaison with developers, project managers, and customer support., • Strong analytical and problem-solving skills., • Proficient with Microsoft Office Suite or related software, • Excellent organizational skills and attention to detail Preferred • Lean Six-Sigma Training/Certification, • Operational experience within QMS in Aerospace, Medical or other highly regulated industry

Job DescriptionWHO WE ARE Consumer Reports is an independent, nonprofit organization dedicated to a fair and just marketplace for all. CR is known for our rigorous testing and trusted ratings on thousands of products and services. We report extensively on consumer trends and challenges, and survey millions of people in the U.S. each year. We leverage our evidence-based approach to advocate for consumer rights, working with policymakers and companies to find solutions for safer products and fair practices. Our mission starts with you. We offer medical benefits that start on your first day as a CR employee that include behavioral health coverage, family planning and a generous 401K match. Learn more about how CR advocates on behalf of our employees. OVERVIEW Data powers everything we do at CR—and it's the foundation for our AI and machine learning efforts that are transforming how we serve consumers. The Data Engineer ( AI/ML & Data Science) will play a critical role in building the data infrastructure that powers advanced AI applications, machine learning models, and analytics systems across CR. Reporting to the Associate Director, AI/M & Data Science, in this role, you will design and maintain robust data pipelines and services that support experimentation, model training, and AI application deployment. If you're passionate about solving complex data challenges, working with cutting-edge AI technologies, and enabling impactful, data-driven products that support CR's mission, this is the role for you. This is a hybrid position. This position is not eligible for sponsorship or relocation assistance. How You'll Make An Impact As a mission based organization, CR and our Software team are pursuing an AI strategy that will drive value for our customers, give our employees superpowers, and address AI harms in the digital marketplace. We're looking for an AI/ML engineer to help us execute on our multi-year roadmap around generative AI. As a Data Engineer ( AI/M & Data Science) you will: • Design, develop, and maintain ETL/ELT pipelines for structured and unstructured data to support AI/ML model and application development, evaluation, and monitoring., • Build and optimize data processing workflows in Databricks, AWS SageMaker, or similar cloud platforms., • Collaborate with AI/ML engineers to deliver clean, reliable datasets for model training and inference., • Implement data quality, observability, and lineage tracking within the ML lifecycle., • Develop Data APIs/microservices to power AI applications and reporting/analytics dashboards., • Support the deployment of AI/ML applications by building and maintaining feature stores and data pipelines optimized for production workloads., • Ensure adherence to CR's data governance, security, and compliance standards across all AI and data workflows., • Work with Product, Engineering and other stakeholders to define project requirements and deliverables. You'll Be Highly Rated If: • You have the experience. You have 3+ years of experience designing and developing data pipelines, data models/schemas, APIs, or services for analytics or ML workloads., • You have the education. You've earned a Bachelor's degree in Computer Science, Engineering, or a related field., • You have programming skills. You are skilled in Python, SQL, and have experience with PySpark on large-scale datasets., • You have experience with data orchestration tools such as Airflow, dbt and Prefect, plus CI/CD pipelines for data delivery., • You have experience with Data and AI/ML platforms such as Databricks, AWS SageMaker or similar., • You have experience working with Kubernetes on cloud platforms like - AWS, GCP, or Azure. You'll Be One of Our Top Picks If: • You are passionate about automation and continuous improvement., • You have excellent documentation and technical communication skills., • You are an analytical thinker with troubleshooting abilities., • You are self-driven and proactive in solving infrastructure bottlenecks. FAIR PAY AND A JUST WORKPLACE At Consumer Reports, we are committed to fair, transparent pay and we strive to provide competitive, market-informed compensation.The target salary range for this position is $100K-$120K. It is anticipated that most qualified candidates will fall near the middle of this range. Compensation for the successful candidate will be informed by the candidate's particular combination of knowledge, skills, competencies, and experience. We have three locations: Yonkers, NY, Washington, DC and Colchester, CT. We are registered to do business in and can only hire from the following states and federal district: Arizona, California, Connecticut, Illinois, Maryland, Massachusetts, Michigan, New Hampshire, New Jersey, New York, Texas, Vermont, Virginia and Washington, DC. Consumer Reports is an equal opportunity employer and does not discriminate in employment on the basis of actual or perceived race, color, creed, religion, age, national origin, ancestry, citizenship status, sex or gender (including pregnancy, childbirth, related medical conditions or lactation), gender identity and expression (including transgender status), sexual orientation, marital status, military service or veteran status, protected medical condition as defined by applicable state or local law, disability, genetic information, or any other basis protected by applicable federal, state or local laws. Consumer Reports will provide you with any reasonable assistance or accommodation for any part of the application and hiring process.

Job Description As a leader in the industry, En-Tech Infrastructure and Insituform Technologies USA, LLC, an Azuria Water Solutions company, is a global company that has been providing pipeline protection services for more than 45 years. Insituform values employee development and empowerment and are looking for innovative individuals to join their team and contribute to maintaining critical infrastructure worldwide. We are hiring a Superintendent - CIPP Immediately in the Closter, NJ area! The Superintendent is responsible for performing and leading training as well as directing the activities of the crew in the installation and repair of pipe rehab products. You’ll have the opportunity to provide leadership and supervision at project sites, ensuring compliance with policies and working rules. The starting salary is $120,000-$140,000 per year depending on experience. Why You’ll Love Working For Us: • Competitive salary, • Daily per diem while traveling plus 100% covered individual hotel room stays, • Benefits are available, • On-the-job training with 100% full pay, • Company paid PPE, boots, and safety gear, • Career growth opportunities, • Advance your career with a forward-thinking and innovative company that offers a variety of professional growth opportunities and a focus on helping achieve your goals, • Ensure quantities are verified; traffic plans and bypass plans properly completed; verifies site conditions and ensures critical site details are documented through project management system, • Ensure construction execution complies with plans and specifications., • Attend the pre-construction meetings, • Ensure materials and equipment for the project are planned for and delivered on time, • Critical documents, local rules and permits are complete, delivered and/or posted, • Ensure that utility locations are identified for crews and sub-contractors, • Ensure that work and quantities completed are verified with Foreman and Sub-contractors, • Monitor and communicate changes in the scope of a project and opportunities for additional revenue or cost savings to the Field Engineer, Project Manager, or General Manager, • In collaboration with the Project Manager, communicate the work schedule to the customer as required; supervise sub-contractors and vendors on the Project Site, • In collaboration with Superintendents, notify residents of work schedules, ensure all pre and post videos and samples are acquired and processed, and ensure the processing of crew and sub-contractor logs, safety documents, tap cutting documents, etc., • Work with customers, crews, and sub-contractors to resolve operational and technical issues and challenges, • Perform job surveys for estimating and sales as required, • High School diploma or equivalent required, • More than 4 years of related industry underground utilities experience; water or sewer and storm experience required, • Experience in emergency repair highly preferred, • Experience managing 5-6 direct reports and multiple crews, in multiple locations required, • Ability to operate heavy equipment, • Ability to be on call for 1-week each month (on-call compensation), • Valid driver’s license required with clean motor vehicle report, • Must possess a Class A or B CDL and be aligned with Insituform’s motor vehicle standards Or be willing to obtain one within 180 days of being hired, • Ability to travel 20%-40% of the time Azuria is an Equal Opportunity Employer. Equal opportunity is a sound and just concept to which Azuria is firmly bound. Azuria will not engage in discrimination against, or harassment of, any person employed or seeking employment with Azuria on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, non-disqualifying disability, status as a protected veteran or other characteristics protected by law. VEVRAA compliant – priority referral Protected Veterans requested. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation.

Job DescriptionVRX, Inc. is an award-winning woman owned civil engineering firm that has been in business since 2006. We offer a comprehensive benefit package including health, dental, vision and life insurance, as well as a Health Saving Account option and a 401k plan with company matching. Office Engineer Location: Rockland County, NYSDOT Region 8 Responsibilities: • Prepare reports on project status, issues encountered, and overall results., • Demonstrate knowledge of construction materials, methods, and procedures., • Exhibit strong written and oral communication skills., • Provide technical engineering information to project managers and other stakeholders., • Assist in the development of project schedules, budgets, and resource allocation plans., • Coordinate with subcontractors and vendors to ensure timely and quality delivery of goods and services., • Assist the Resident Engineer on reviewing and approve contractor’s submittals, RFIs, shop drawings, and other project documents., • Conduct site visits (As needed) to monitor project progress and identify potential issues., • Manage and maintain project files, records, and documentation., • Prepare and submit reports, including progress reports, project status reports, and financial reports., • Managed the official project correspondences per the state agency standards including emails, letters, and faxes., • Preparation of project closeout documents and final reports., • Conduct meetings, meetings., • Coordinate, and schedule various types of meetings such as, but not limited to Kick-off, progress, critical phase meeting and record, draft and distribute meeting minutes., • Communicate project information and updates to team members, management, and clients., • Manage and maintain project budgets, including tracking expenses and ensuring compliance with budget constraints., • Carefully Review various types of inspector reports to ensure use of appropriate pay items, calculations and sketches., • Maintain a detailed digital track record of various pay items and quantities including Time and Material records and prepare various types of invoices and payment Requisitions., • Maintain an organized field office folder structure to host all the project files, inspection reports, submittals, RFIs, Payments, photographs, etc. according to the state specifications., • Maintain accurate and up-to-date records of project activities, including hours worked, materials used, and equipment rented.Educational Requirements and Experience/ Professional Licenses/Registrations, • Experience as an office engineer on various city and state agencies such as NYCDDC, NYSDOT, NYCDOT, PANYNJ, or MTA is a must., • Bachelor's degree (B. S. or B.A.) in Civil Engineering or Structural / Construction Engineering., • Diploma or equivalent with 8+ years of experience as an Office Engineer., • A valid driver’s license and personal vehicle to travel to and from project sites for site inspections., • NYCDDC Water Main Training Inspection Certificate (Preferred)., • OSHA 10-hour certification., • ACI certification (Preferred), • 5 years of construction inspection experience in bridge or roadway work, preferred., • Strong technical and analytical skills, with proficiency in Microsoft Office, • Experience with Site Manager / AASHTOWare construction management software is a must, • Excellent communication, organizational, and problem-solving skills VRX, Inc. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Powered by JazzHR 2pHyYPONjh

Manufacturing Engineer Injection Molding - Eastchester, NY Plastics Engineer Process Engineer Manufacturing Engineer Project Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset _ . Seeking individual able to join a large-volume producer of automotive component parts and refine complex production activities into efficient, cost effective and quality focused processes. Shall: * Create Design Of Experiments. * Recommend new equipment to fit production needs based on cost, efficiency and quality requirements. * Develop, improve and document new procedures for injection molding operations. * Train process technicians, setup personnel and operators on production activities. Qualifications: * Knowledge of industrial automation as well as Six Sigma, Lean Manufacturing, or similar. * 5+ years experience process engineering for injection molding operations. *** Familiarity with RJG Process Control hardware setup and operation. Excellent opportunity with generous benefits potential total compensation package up to $160,000 including end of year bonus, excellent health, medical, dental and vision insurance packages, company matched 401(k) and paid time off for vacations, personal days and sick days, company paid training and paid holidays. For complete details contact Christopher Moreno at: (609) 584-9000 ext 264 Or submit resume online at: Or email to: Please reference #427201NY1242 when responding. Diedre Moire Corporation Education Requirements: Bachelor DegreeMinimum Experience Requirements: 5-10 yearsJob City Location: EastchesterJob State Location: NYJob Country Location: USASalary Range: $90,000 to $160,000 Diedre Moire Corporation, Inc. diedremoire.com WE ARE AN EQUAL OPPORTUNITY EMPLOYER and our employment decisions are made without regard to race, color, religion, age, sex, national origin, handicap, disability or marital status. We reasonably accommodate individuals with handicaps, disabilities and bona fide religious beliefs. Jobs Career Position Hiring. CONSIDERED EXPERIENCE INCLUDES: Plastics Engineer Process Engineer Manufacturing Engineer Project Engineer Plastic Molding Injection Mold Blow Extrusion Tooling Designer Moldmaking Lean Applications Thermoplastics Thermoset #DiedreMoire #PlasticMolding #JobSearch #JobHunt #JobOpening #Hiring #Job #Jobs #Careers #Employment #jobposting #manufacturingjobs #ProcessEngineerJobs DISCLAIMER: We will make every effort to consider applications for all available positions and shall use one or more of the contact methods and addresses indicated in resume or online application. Indicated location may be proximate or may be desirable point of embarkation for paid or unpaid relocation to another venue. Job descriptions may fit single or multiple presently available or anticipated positions and are NOT an offer of employment or contract implied or otherwise. Described compensation is not definite nor precise and may be estimated and approximate and is negotiable depending on market conditions and candidate availability and other factors and is solely at the discretion of employers. Linguistics used herein may use First Person Singular and First Person Plural grammatical person construction for and with the meaning of Third Person Singular and Third Person Plural references. We reserves the right to amend and change responsibilities to meet business and organizational needs as necessary. Response to a specific posting or advertisement may result in consideration for other opportunities and not necessarily the incentive or basis of the response. Nothing herein is or may be considered a promise, guarantee, offer, pledge, agreement, contract, or oath. If you submit an application or resume which contains your email address, we will use that email address to communicate with you about this and other positions. We use an email quality control service to maintain security and a remove and dead address filter. To cancel receiving email communications, simply send an email from your address with the word remove"" in the subject line to Or, visit the website at . If you have further concern regarding email received from us, call (609) 584-5499

Position: Construction QA/QC and Electrical Commissioning Engineer Location: U.S. (Travel up to 50%). Current need in Palisades, NY About the Role A Global Real Estate and Engineering firm is seeking a skilled Construction QA/QC and Electrical Commissioning Engineer to support mission-critical and data center projects. The role involves overseeing electrical quality assurance, system commissioning, and field testing across all project phases. The ideal candidate will possess strong technical acumen, excellent organizational skills, and the ability to work collaboratively with cross-functional teams in fast-paced environments. Key Responsibilities • Lead and execute QA/QC and electrical commissioning programs in alignment with ASHRAE guidelines., • Conduct system inspections, testing, and verification for electrical systems, including UPS, switchgear, generators, and EPMS., • Develop and implement commissioning plans, checklists, and test scripts (functional and integrated systems tests)., • Perform design reviews, submittal reviews, and field inspections for conformance with specifications., • Coordinate with contractors, engineers, and AHJs throughout project delivery., • Develop and maintain commissioning documentation, SOPs, MOPs, and Systems Manuals., • Utilize QA/QC and commissioning software such as BIM360, CxAlloy, and Facility Grid., • Perform electrical testing and analyze results using tools such as PQMs, thermography, and ground testing equipment., • Support the planning, scheduling, and reporting of commissioning progress and performance., • Provide vendor training evaluation and system performance verification. Qualifications • Bachelor’s degree in Electrical Engineering or related technical field (ABET-accredited preferred)., • Minimum 10 years of relevant electrical engineering or field-testing experience, including 5 years in commissioning or QA/QC., • Commissioning Professional certification preferred., • PE or PMP designation is an asset., • Proven expertise in testing and commissioning electrical power systems (UPS, ATS, STS, generators, PDUs, etc.)., • Strong analytical, communication, and leadership skills., • Proficiency in MS Project, Word, and Excel., • Demonstrated ability to consolidate and report project performance data., • Experience in consultancy or owner’s representative organizations is advantageous. Work Environment • Field-based role with travel up to 50% across the U.S., • Collaborative, high-performance team environment focused on mission-critical projects.

Job DescriptionSummaryOur client is a leading IT Solutions Company located in the Yonkers, NY (Manhattan, NY area) and they are in need of a Level III IT Engineer. A qualified candidate would have both proven experience with technology and outstanding personal communication skills. You should enjoy building solutions that leverage technology to meet a client’s business needs. Duties & Responsibilities • Work with sales to provide pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • Deploying and managing Windows Servers and Active Directory, • Designing Local Area Networks, • Implementing and monitoring network security, • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response., • New User On-boardingQualifications & Requirements, • Minimum of 5 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • Having worked in an MSP environment is a MUST., • Three years of experience in a client-facing environment such as sales engineering, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, such as Kaseya or Connectwise., • Experience with a PSA (ticketing system) tool a plus, such as Autotask or Connectwise., • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plusIdeal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plusOur client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.

Job DescriptionSummaryOur client is a leading IT Solutions Company located in the Yonkers, NY (Manhattan, NY area) and they are in need of a Level III IT Engineer. A qualified candidate would have both proven experience with technology and outstanding personal communication skills. You should enjoy building solutions that leverage technology to meet a clients business needs. Duties & Responsibilities • Workwith sales to provide pre- and post-sales support, including tasks such as discovery meetings, site visits, proposals and presentations, technical assessments, implementation, and ongoing technical account management., • Deploying and managing Windows Servers and Active Directory, • Designing Local Area Networks, • Implementing and monitoring network security, • Optimizing and maintaining network software and hardware, • Building and deploying file servers and cloud computing solutions, • Configuring and deploying VOIP solutions, • Performing network infrastructure troubleshooting, • Manage Microsoft Exchange Server, • Telephone solutions, • Monitors alert systems and take appropriate action as per guidelines., • Ability to use various messages in an event log to affect repairs., • Receive escalated service requests requiring an enhanced response., • New User On-boardingQualifications & Requirements, • Minimum of 5 years hands-on experience configuring, troubleshooting and repairing networking equipment, Windows servers and workstations, Exchange server and Active Directory, • Having worked in an MSP environment is a MUST., • Three years of experience in a client-facing environment such as sales engineering, • Excellent verbal and written communication skills and is comfortable working with clients at a business level to understand their current and historic issues regarding their business and technology, • Possesses strong organizational and time-management skills, • Experience writing proposals for and implementation of technical solutions to fulfill business needs, • Results-oriented, self-motivated, energetic, professional, reliable, and a team player, • Strong understanding of technology and business productivity systems, • Experience with RMM (remote monitoring and management) tool a plus, such as Kaseya or Connectwise., • Experience with a PSA (ticketing system) tool a plus, such as Autotask or Connectwise., • Ability to problem solve at a high level, extraordinary customer service skills, strong multi-tasking, and organizational skills, • Sales training experience is a plus Ideal Qualifications (not required), • CompTIA Net+ and/or CompTIA Security+, • MCSA (Microsoft Certified Systems Administrator/Solutions Associate) or MCSE (Microsoft Certified Systems Engineer) MCITP Microsoft Certified IT Professional, MCSE (Microsoft Certified Solutions Expert), • CCNA or CCIE-Cisco certifications a real plus Our client offers challenging work, career opportunities, a pleasant work environment, and ongoing training.Employment Type: Full time Location: Yonkers, NY