Medical equipment repair jobs in Hicksville, New YorkCreate job alerts

Job DescriptionPower-Flo Technologies is seeking a motivated individual to join our team as an HVAC Controls Technician. We are a two location temperature controls distributor specializing in providing engineering, materials, and startup assistance for temperature control systems. We are looking for someone to work independently in the field to startup, service, and support these systems in coordination with our in-house engineering team. What Will Make You Successful in This Role? • Experience and certification with programming either Johnson FX controllers (CCT) (preferred), Honeywell Spyder, and/or Niagara AX/N4 (any brand)., • Experience with ACAD, or similar CAD software., • Knowledge of industry-standard communication protocols such as BACnet MSTP, BACnet IP, Niagara, JCI N2, Modbus, Lon, Etc., • Niagara N4 certification., • 3 years of building automation experience required., • Strong understanding of commercial HVAC systems operations., • Ability to read mechanical prints and schematics., • Ability to work independently and in a team setting., • Basic knowledge regarding use of a PC (Microsoft Word, Excel, Outlook)., • Competent with the use of electrical test equipment, i.e., Multi meter, shop tools, hand tools, pneumatic tools., • Mechanical aptitude required., • The ability to troubleshoot basic electric and electronic circuitry including reading and interpreting electrical and electronic diagrams., • Valid and clean NYS Driver's License to operate company vehicles., • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching Salary Range: $60,000 – $100,000/year Benefits • Health Insurance (medical, dental, vision), • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Calling All Hardworking HVAC Pros: Join Our Industry Leading Crew! Are you ready to roll up your sleeves and join a team that's all about your growth and success? We're not just about the job—we're about building careers that last. We're proud to be a company that values good old-fashioned hard work and the satisfaction of a job well done. We work hard, but we have fun, too! You'll be a crucial part of our team as an HVAC Installer. You'll install and connect various HVAC systems, ensuring they operate efficiently and meet all safety and quality standards. We're looking for individuals who take pride in their work, have a strong work ethic, and are eager to learn and grow alongside our team. What Can We Do for You? • Competitive Compensation ranges between $25 - $32/hour!, • Stable work environment where your growth is encouraged and supported., • Continuous and extensive training and development opportunities., • Medical, dental, and vision insurance, • Long-term disability and company-paid life insurance., • 401K plan with company match., • PTO and paid holidays.Company-provided vehicle, phone, and tablet. Responsibilities for the HVAC Installer: • Install, maintain, and repair refrigeration, heating, and air conditioning systems., • Capable of independently performing the entire installation process to collaborate with team members to make sure the job is done efficiently with no callbacks., • Ensure efficient material usage and maintain sufficient equipment stock., • Collect payment or payment details from customers for services rendered., • Maintain company vehicle and equipment, ensuring cleanliness and proper functioning., • Prepare invoices, daily route sheets, and weekly reports as necessary., • Maintain accurate logs of all work performed., • Ensure our reputation for superior service is maintained during all interactions with customers., • Fulfill additional responsibilities as required, including cross-training in various roles. Requirements for the HVAC Installer: • Minimum of 3-5 years of Residential HVAC Installation experience., • EPA Universal Certification., • Heating/Boiling/AC experience required., • Exceptional customer communication skills., • A team player who thrives in both collaborative and independent settings., • An enthusiastic and positive individual eager to embrace challenges., • Physically able to work on HVAC units - Must be able to lift 50 pounds at a time., • Prolonged periods of standing, kneeling, crawling, or climbing ladders., • Ability to work outside; exposed to heat and cold. If you're passionate about being part of a dynamic team that's shaping the future of HVAC services, then we want to hear from you! Don't miss this opportunity to join an industry-leading legacy. Apply now and let's take your HVAC career to new heights together! Equal Opportunity Employer (EOE): We are an Equal Opportunity Employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by law. We encourage applications from all qualified individuals.

Job Description Calling All Hardworking HVAC Pros: Join Our Industry Leading Crew! Are you ready to roll up your sleeves and join a team that's all about your growth and success? We're not just about the job – we're about building careers that last. We're proud to be a company that values good old-fashioned hard work and the satisfaction of a job well done. We work hard but we have FUN too! As an HVAC Service Technician with us, you'll be in the thick of it, maintaining and fixing residential indoor air quality systems like a pro. From air conditioners to everything in between, you'll be the go-to expert for getting the job done right. Work for a company that is supportive, fun and wants to see you grow in your HVAC career. What Can We Do for You? * Competitive Compensation- $35-$45/hr DOE plus commission! * Stable work environment where your growth is encouraged and supported. * Continuous and extensive training and development opportunities. * Medical, dental, and vision insurance * Long-term disability, short-term disability, and company-paid life insurance. * 401K plan with company match. * PTO and paid holidays. * Company Provided – vehicle, gas card, uniform, phone and tablet. Responsibilities for the HVAC Service Technician: * Perform maintenance, and repair of residential HVAC systems, encompassing heating, cooling, and ventilation equipment. * Diagnose and troubleshoot issues with HVAC systems, pinpointing the root cause of malfunctions and proposing effective solutions. * Conduct regular inspections and preventive maintenance to uphold optimal system performance and prevent potential problems. * Install, repair, or replace various components, including compressors, motors, fans, thermostats, filters, and ductwork. * Interact with customers professionally and courteously, addressing their concerns, explaining repair options, and suggesting system improvements. * Maintain accurate documentation of service activities, detailing equipment status, repairs conducted, parts utilized, and time allocated for each job. * Remain informed about industry advancements, best practices, and emerging technologies to continually enhance technical expertise and knowledge. Requirements for the HVAC Service Technician: * Minimum of 3-5 years of hands-on experience in HVAC systems. * Oil Burner experience highly preferred. * A valid EPA certification is ideal. * OSHA, NATE or CFC certifications are a plus. * Proficient in diagnosing and repairing residential HVAC systems with strong technical skills. * Solid knowledge of HVAC codes, regulations, and safety standards. * Excellent communication and customer service skills. * Ability to work in various settings, including attics and crawl spaces. * Physically capable of lifting 50+ pounds * Ability to work on call. Join us in revolutionizing the way plumbing and HVAC businesses operate, where every interaction is a testament to our dedication to excellence. Apply today! Equal Opportunity Employer (EOE): We are an Equal Opportunity Employer and do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by law. We encourage applications from all qualified individuals.

Job Description We are Universe Home Services, a proud local business serving homeowners across Nassau and Suffolk counties with expert HVAC, Plumbing and Electrical solutions. Located in Farmingdale. Now Hiring: Full Time Residential HVAC Service Technician. All shifts: 8:00am - 4:00pm & 2:00pm - 10:00pm. Monday - Friday - Weekends and Nights available! You will take the lead in troubleshooting and repair efforts, identifying and diagnosing HVAC issues on residential units. Handles warranty services efficiently and responds promptly to perform emergency repairs. What you Will do: • Perform start-ups of newly installed HVAC Systems., • Troubleshoot system issues and diagnose problems., • Perform minor repairs and component replacements., • Handle warranty work and callbacks professionally and efficiently., • Ensure all systems operate safely and according to manufacturer specifications., • Maintain accurate service records and documentation., • Communicate findings and recommendations clearly to customers and management., • Diagnose and repair HVAC units., • Perform HVAC service, repairs, and maintenance for residential clients., • Provides on the best solution for the customer., • Collaborate with the team to ensure projects are completed efficiently., • Maintain communication with dispatch, your manager, parts, and installation teams., • 3-5 years of experience in related field., • High School Diploma or equivalent, • Valid Driver's license., • Knowledge of HVAC codes and proper application; knowledge of proper electrical and HVAC safety., • Must have strong math skills., • Knowledge of Gas systems and appliances., • Ability to work independently and as part of a team, • Ability to develop heating, ventilating, and air conditioning system modification plans., • Performs preventive maintenance on Gas heating systems, and associated equipment., • Ability to explain technical information to customers., • Ability to effectively communicate information and respond to customer questions., • Strong listening and communication skills., • Teamwork oriented., • Ability to thrive in a fast-paced, customer-focused work environment. We offer a competitive salary plus a great benefits package including: • Medical, Dental, and Vision., • 401(k) Match, • PTO and paid holidays, • STD, LTD, Life, and AD&D insurance., • Referral program Who We are: Universe Home Services has been in business for 70 years (and counting), helping homeowners with their HVAC, Plumbing and Electrical needs. We are consistently growing in terms of services, employees, and customers. Universe Home Services is an equal opportunity employer. We bring unique talents together to build something special.

Job Description We are Universe Home Services, a proud local business serving homeowners across Nassau and Suffolk counties with expert HVAC, Plumbing and Electrical solutions. Located in Farmingdale. Now Hiring: Full Time Residential HVAC Oil Heating Technician. You will play a key role in providing top-notch services to ensure that our customers' homes are safe, and energy efficient. Join us in making homes across Long Island better, safer, and more comfortable for everyone. You will take the lead in troubleshooting and repair efforts, identifying and diagnosing HVAC issues on oil heating systems for residential and commercial units. Handles warranty services efficiently and responds promptly to perform emergency repairs. What you Will do: • Diagnose, repair, and maintain oil heating systems., • Perform routine service, emergency repairs, and preventative maintenance for residential and commercial clients., • Recommend the best solutions for the customer's heating needs., • Collaborate with the team to ensure projects are completed efficiently., • Maintain communication with Dispatch, your Manager, Parts and Installation Teams., • Proven experience with OIL HEATING systems and related equipment., • Strong troubleshooting and diagnostic skills, • Excellent customer service and communication skills., • Ability to work independently as well as part of a team., • Valid Driver's license, • Ability to explain technical information to customers., • Strong listening and communication skills., • Teamwork oriented. We offer a competitive salary plus a great benefits package including: • Medical, Dental, and Vision., • 401(k) Match, • PTO and paid holidays, • STD, LTD, Life, and AD&D insurance., • Referral program Who We are: Universe Home Services has been in business for 70 years (and counting), helping homeowners with their HVAC, Plumbing and Electrical needs. We are consistently growing in terms of services, employees, and customers and with that growth we have maintained valued employees for over 20 years! Universe Home Services is an equal opportunity employer. We bring unique talents together to build something special.

Job Description Location: Farmingdale, NY Job Title: HVAC Service Oil Technician Are you ready to roll up your sleeves and join a team that's all about your growth and success? We're not just about the job – we're about building careers that last. We're proud to be a company that values good old-fashioned hard work and the satisfaction of a job well done. We work hard but we have FUN too! As an HVAC Service Oil Technician with us, you'll be the highly valued go-to expert for oil burner systems, maintaining and fixing residential indoor air quality systems like a pro. From air conditioners to complex oil-fired heating equipment, you'll be the go-to expert for getting the job done right. Work for a company that is supportive, fun, and wants to see you grow in your HVAC career. Responsibilities and Expectations: * Expertly diagnose, maintain, and repair oil burner systems, oil furnaces, and related components as a primary function of the role. * Perform maintenance and repair of all residential HVAC systems, encompassing heating, cooling, and ventilation equipment. * Diagnose and troubleshoot issues with HVAC systems, pinpointing the root cause of malfunctions and proposing effective solutions. * Conduct regular inspections and preventive maintenance to uphold optimal system performance and prevent potential problems. * Install, repair, or replace various components, including compressors, motors, fans, thermostats, filters, and ductwork. * Interact with customers professionally and courteously, addressing their concerns, explaining repair options, and suggesting system improvements. * Maintain accurate documentation of service activities, detailing equipment status, repairs conducted, parts utilized, and time allocated for each job. * Remain informed about industry advancements, best practices, and emerging technologies to continually enhance technical expertise and knowledge. Requirements: * 5+ years of hands-on experience in HVAC systems. * Oil Burner experience is required (deep knowledge and experience with servicing and troubleshooting oil-fired equipment is essential). * A valid EPA certification is ideal. * OSHA, NATE or CFC certifications are a plus. * Proficient in diagnosing and repairing residential HVAC systems with strong technical skills. * Solid knowledge of HVAC codes, regulations, and safety standards. * Excellent communication and customer service skills. * Ability to work in various settings, including attics and crawl spaces. * Physically capable of lifting 50+ pounds * Ability to work on call. What Can We Do for You? * Competitive Compensation- $33-$45/hr DOE plus commission! * Stable work environment where your growth is encouraged and supported. * Continuous and extensive training and development opportunities. * Medical, dental, and vision insurance * Long-term disability, short-term disability, and company-paid life insurance. * 401K plan with company match. * PTO and paid holidays. * Company Provided – vehicle, gas card, uniform, phone and tablet. The compensation for this position is expected to range between $33.00 - $45.00 per hour. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job Description Location: Farmingdale, NY Job Title: HVAC Service Helper We are looking for a motivated and reliable HVAC Service Helper to join our team in Farmingdale, NY. This entry-level position is perfect for someone eager to start a career in the skilled trades. You will work directly under experienced Service Technicians, gaining essential hands-on knowledge in residential and commercial HVAC maintenance, repair, and installation. If you are dependable, safety-conscious, and ready to learn, this is your chance to start a rewarding career path. Responsibilities and Expectations: * Work closely with and assist lead HVAC Service Technicians on job sites, helping with installation, maintenance, and troubleshooting of various HVAC systems. * Maintain organization of the company vehicle and ensure all necessary tools, equipment, and materials are prepared and loaded for each job. * Prepare job sites by setting up drop cloths and necessary safety equipment, and assist in cleanup after the work is complete. * Perform basic tasks as directed by the lead technician, such as retrieving parts, holding materials, fetching tools, and preparing piping or wiring. * Adhere strictly to all company safety policies and procedures, wearing appropriate personal protective equipment (PPE) at all times. * Maintain a professional and respectful demeanor when interacting with customers, acting as a positive representation of the company. * Actively observe and seek to learn technical skills, diagnostic processes, and best practices from experienced technicians. Requirements: * 2+ years of experience in an HVAC related field * Must be physically able to lift heavy equipment, climb ladders, and work in varying environments (attics, crawl spaces, etc.). * Valid driver's license with a clean driving record. * Strong work ethic, reliability, and punctuality are essential. * Eagerness to learn the HVAC trade and follow detailed instructions. * Must pass a pre-employment background check and drug screening. What Can We Do for You? * Competitive Compensation- $22-$28/hr DOE * Stable work environment where your growth is encouraged and supported. * Continuous and extensive training and development opportunities. * Medical, dental, and vision insurance * Long-term disability, short-term disability, and company-paid life insurance. * 401K plan with company match. * PTO and paid holidays. * Company Provided – vehicle, gas card, uniform, phone and tablet. The compensation for this position is expected to range between $22.00 - $28.00 per hour. This range is a good-faith estimate, based on the qualifications necessary for the position, including experience, training, and other considerations permitted by law. Factors that may be used when making an offer may include a candidate's skills, experience, the expected quality and quantity of work, and internal pay alignment, as needed. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, sexual orientation, gender identity or any other characteristic protected by law. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments.

Job Seekers can review the Job Applicant Privacy Policy by clicking here () . Job Description : BUILD ON YOUR CAREER WITH A COMPANY THAT HAS A FUTURE At Ryder, our most important competitive advantage is our people. CULTURE- INTEGRITY- FAMILY . As a Customer Service Coordinator, you’ll be part of a dynamic team, equipped to succeed and empowered to develop your transportation & logistics career. This is an essential industry and we’ve been in the game since 1933! The Senior Ops Manager II manages the operations and personnel for locations with approximately 601+ truck units comprised of one or more locations. Roles including Operations Managers, Technicians-In-Charge, and/or Customer Service Coordinators, as well as Technicians, Service Employees and/or a Parts Responsible Person report to you and are there to support the needs of the assigned location. The Senior Operations Manager must be able to accomplish results through the effective delegation of work and responsibilities, thus ensuring business objectives and labor requirements are met. Senior Ops Managers are responsible for ensuring that financial requirements are being met while balancing the needs of the customers against the requirements of the business. This position is responsible for the management of location(s) performance against comprehensive metrics to meet and/or exceed assigned objectives. This position is also responsible for ensuring that the location is in compliance with and properly executing all key company processes, Standard Operating Procedures and Standard Repair Practices. As with all Ryder FMS Shop positions, the Senior Ops Manager is responsible for adhering to all Ryder Maintenance Operations policies and procedures. This may also be a development position to prepare incumbents for the Senior Operations Manager II, Field Operations Manager, or Quality Assurance Manager roles. Shop Location: Farmingdale NY Hours: First Shift Schedule: Monday - Friday Salary | Bonus Eligible Here it from people who work here! This is Ryder: Ryder offers comprehensive health and welfare benefits, including medical, prescription, dental, vision, life insurance, and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. You thought that was it? Take a look at a few of these: Ryder's most recently been named "Top Company for Women to Work for in Transportation () " by Women in Trucking, one of Fortune Magazine ’s “World’s Most Admired Companies () ”, & one of “Reader's Choice Excellence Awards () ” by Inbound Logistics. What about our green initiative…? We have the largest EV footprint in the U.S. In addition to that, Verizon has recognized Ryder with their "Supplier Environmental Excellence Award () " Essential Functions • Operations Management:Responsible for the execution of work analysis, vehicle planning and scheduling, scheduling and assigning work to technicians, productivity tracking and optimization, shift and shop meetings, and RO review and approval.Directly involved in Labor Planning by evaluating incoming work and allocating resources, balancing shift schedules, and level loading work load to maximize efficiency and productivity.Responsible for optimizing labor at the shop, and ensuring the optimal mix of straight time, O/T and Outside Repair.Responsible for optimizing shift patterns to match supply of qualified tech hours versus the availability of equipment based upon customer operating hours.Oversee the execution of the Automated Planning System (APS)., • Labor Management:Provides management, training and development of all personnel assigned.Responsible for Performance Management of all assigned personnel.Responsible for successful development and execution of the Technical Training Plan in coordination with the Field Training Team. Ensure TOPS plan is prioritized based upon Breakdown, Rework and Running Cost trends.Makes recommendations for future staffing based on changes to the business environment.Responsible for Recruiting, Hiring, On-boarding, Payroll, and Succession Planning., • Customer Management:Directly responsible for customer relationship management to include issue resolutions, customer satisfaction, and retention, as well as ensuring uptime.Responsible for execution of customer communication protocol.Responsible for optimizing vehicle maintenance cycle time and ensuring that the shop meets or exceeds Delivered in Time Promised objectives based upon customer requirements.Collaborate with Sales Team to develop the service requirement section of the Customer Care Plan to ensure effective delivery of service.Conduct customer visits and annual reviews as required by the Customer Care Plan., • Financial Management:Responsible for implementing cost control measures related to maintenance operations budget and location P&L statement to meet short and long term financial goals.Directly responsible for successful execution of Maintenance Initiatives to attain or exceed specified financial targets.Responsible for the optimization of net maintenance cost per unit.Responsible for Customer Retention and Maintenance CSI through optimal execution of the Maintenance Promise.Work with vendor sourcing group to identify potential and preferred vendors for specific facilities and vehicle maintenance services. Responsible for ensuring accuracy of third party invoices and the quality of worked outsourced to vendors.Responsible for Payroll, Purchase Order approval and invoice reconciliation, and fuel reconciliation, all liquid inventories to include fuel, DEF and oil.Responsible for the successful execution of the customer bill back process to include identification, review and approval of bill back opportunities.Responsible for ensuring proper documentation and explanation/ reporting of re-billable activity.Responsible for the successful execution of the Warranty process and maximizing warranty recovery.Ensure data integrity in the Shop Management Online system., • Asset Management:Directs his/her subordinates in maintaining the appearance and maintenance of assigned locations, including sustaining 6S standards throughout the shop.Evaluates needs and makes recommendation for shop tooling and equipment requirements.Responsible for the execution of Asset Management initiatives at the shop level.Management and oversight of vehicle specifications and vehicle in-service/out-service process.Provide input during business unit asset management review.Ensure all vehicles have required specifications in SAM.Responsible for successful execution of Parts Inventory management, policies and procedures.Collaborate with Rental in scheduling PM’s, utilization of assets to be ready at all times, subs, VMI, and wash log., • Demonstrated success at performance managing teams while leading, training, and developing the workforce, including effective delegation and oversight of assigned work, • Understanding of labor, financial operating, quality, safety and asset processes and related metrics, • Strong sense of personal accountability and a proven track record of achieving desired results, • Ability to communicate effectively both verbally and in writing, • Proficient in basic computer skills and in a Microsoft Office environment, • Ability to work with reporting systems to pull data for analysis and decision making (preferred), • Demonstrated success to a safe work environment, quality execution, and customer service as evidenced by previous experience and performance track record, • Experience using Microsoft word and excel intermediate preferred, • Experience with Fleet Management Software preferred, • H.S. diploma/GED required., • Associate's degree preferred., • Bachelor's degree preferred., • Three (3) years or more experience in an operations environment or demonstrated success in a Ryder role required. Safety Sensitive Non-Regulated Tech DOT Regulated: No LI-JM INDexempt FB Job Category: Maintenance Compensation Information : The compensation offered to a candidate may be influenced by a variety of factors, including the candidate’s relevant experience; education, including relevant degrees or certifications; work location; market data/ranges; internal equity; internal salary ranges; etc. The position may also be eligible to receive an annual bonus, commission, and/or long-term incentive plan based on the level and/or type. Compensation ranges for the position are below: Pay Type : Salaried Minimum Pay Range: 85,000 Maximum Pay Range: 95,000 Benefits Information: For all Full-time positions only : Ryder offers comprehensive health and welfare benefits, to include medical, prescription, dental, vision, life insurance and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Important Note : Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Security Notice for Applicants: Ryder will only communicate with an applicant directly from a [@ryder.com] email address and will never conduct an interview online through a chat type forum, messaging app (such as WhatsApp or Telegram), or via an online questionnaire. During an interview, Ryder will never ask for any form of payment or banking details and will never solicit personal information outside of the formal submitted application through . Should you have any questions regarding the application process or to verify the legitimacy of an interview or Ryder representative, please contact Ryder at or 800-793-3754. Current Employees : If you are a current employee at Ryder, please click here () to log in to Workday to apply using the internal application process. Job Seekers can review the Job Applicant Privacy Policy by clicking here () . wd

Rexel USA is one of the largest distributors of electrical products, data communication, and related supplies in the United States. Rexel USA operates its electrical distribution business in the United States through eight Regions that go to market under various banner and trade names, including Rexel, Rexel Automation, Gexpro, Mayer, and Platt Electric Supply. In addition to an online store, Rexel USA has a distribution network of over 460 warehouse storefront locations throughout the U.S. Job Description We are looking for a Truck Driver Union to join our Schwing Electrical Supply team in Farmingdale, NY! Summary: The Union Truck Driver is responsible for delivering products to/from customers, company branch/warehouse locations, and company suppliers in a delivery van or box truck (No CDL required). Responsible for ensuring that deliveries are prepared to meet customer requirements in the most efficient manner, and materials are correct and free of damage. What You'll Do: • Inspect company vehicle for visual and operating defects. Responsible for completing a daily inspection report, • Keep company vehicle clean, serviced, and maintained. Alert supervisor of repair and/or service needed, • Must follow Department of Transportation (DOT), local and state driving laws and regulations, • Load or unload vehicle; and ensure all material for each order is correct (quantity and type of material), and that material is free of damage before departure, • May assist in preparing orders for delivery, • Ensure all appropriate documentation is thoroughly completed at the time of delivery, including delivery receipt is signed by the customer, packing list and branch/warehouse manifest, • May be required to pick up material returns from customers. Responsible for inspecting the condition of the material and verifying quantities and catalog numbers, • May be required to pick up material from company suppliers The information contained in this job description is intended to describe the essential job functions required of those assigned to this job. It is not intended to be an exhaustive list of all responsibilities, duties, knowledge, skills, and abilities needed to perform the job. Please note that management retains the right to assign or reassign duties and responsibilities to this job at any time. The ability to competently perform all the essential duties of the position, with or without reasonable accommodation, demonstrate commitment to effective customer service delivery, integrity, and the ability to work productively as a member of a team or work group are basic requirements of all positions at Rexel USA. Qualifications What You'll Need • In lieu of experience, must attend company driver training, • Must have a valid Driver’s License, • Must be at least 21 years of age, • Must pass a pre-employment and annual review of their Motor Vehicle Record, • Must obtain verification of non-expired medical certificate as required by law within 60 days of hire, • Must not have had a suspended driver's license for a traffic accident/violation within the past 3 years, • Ability to handle loads with a combine weight not to exceed 26,000 GVW, • Ability to handle basic issues and problems, • Strong knowledge of safety regulations, and be familiar with traffic and driver laws, • Willingness to adhere to assigned routes, schedules, safety procedures, and transportation laws, • Excellent organizational and time management skills. Ability to meet deadlines, • Excellent customer service skills, • Good attention to detail, • Ability to meet deadlines, • Ability to work overtime as needed Additional Information Physical Demands: • Sit: Must be able to remain in a stationary position - Occasionally – up to 20%, • Walk: Must be able to move about inside/outside office or work location - Occasionally – up to 20%, • Use hands to finger, handle, or feel: Operates a computer and other office machinery - Constantly – at least 51%, • Stoop, kneel, crouch, or crawl: Must be able to crouch down to stock shelves, pick up boxes, or position oneself to maintain computers in the lab/under desks/in server closet - Occasionally – up to 20%, • Climb or balance: Must be able to ascend/descend on a ladder, forklift, pallet jack, or other warehouse equipment - Occasionally – up to 20%, • Up to 10 pounds - Constantly – at least 51%, • Up to 25 pounds - Constantly – at least 51%, • Exposed to unpleasant or disagreeable physical environment such as high noise level and/or exposure to heat and cold - Occasionally – up to 20%, • Exposed to electrical hazards; risk of electrical shock - Constantly – at least 51%, • Handles or works with potentially dangerous equipment - Constantly – at least 51% For the state of New York only, the pay range is $20.00 to $24.00, depending upon qualifications, experience and other considerations permitted by law. Our Benefits Include: • Medical, Dental, and Vision Insurance, • Life Insurance, • Short-Term and Long-Term Disability Insurance, • 401K with Employer Match, • Paid vacation and sick time, • Paid company holidays plus flexible personal days per year, • Tuition Reimbursement, • Health & Wellness Programs, • Flexible Spending Accounts, • HSA Accounts, • Commuter Transit Benefits, • Additional Optional Insurance such as Pet Insurance, Legal Assistance, Critical Illness, Home and Auto Insurance to name a few., • Employee Discount Programs, • Professional Training & Development Programs, • Career Advancement Opportunities – We like to promote from within Our goal is to create a workplace where everyone feels respected, valued, and empowered to succeed as we understand that our success and innovation is enhanced by an inclusive and diverse workforce. Rexel USA (A VEVRAA Federal Contractor), and its affiliated companies, is an EEO/Disabled/Veterans employer. All qualified candidates will receive consideration for employment without regard to any characteristics protected by law.

Job Description LIC based Local 638 HVAC Service Company has an opening for highly skilled experienced Commercial HVAC/Refrigeration Technicians for hi-volume fast paced service department. Opportunities are available for Commercial Refrigeration and HVAC. WE ARE PROUD TO HIRE VETERANS! Responsibilities to include, but are not limited to: • Maintain service and repair HVAC/Refrigeration equipment and associated systems in commercial and industrial establishments., • Assess equipment and service needs of customer., • Identify revenue generating opportunities; make recommendations to customer that can be immediately performed., • Service and repair HVAC systems and refrigeration equipment., • Possess diagnostic and troubleshooting skills., • Prepare accurate daily reporting on work orders and quotes., • Communicate with Dispatcher and Service department personnel., • Utilize all applicable safety equipment and personal protective equipment (PPE)., • A valid clean driver's license and meet the company's motor vehicle policy., • FDNY Torch Certification, • OSHA 30 hour and 10 hour SST Certification, • Be proficient with Smart Phone Usage, Knowledge of IVR usage and Retail procedures is a plus, • Flexible to work stand by rotation and overtime as needed

Job Description Location: On-Site in Garden City Park & Field Work Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM with overtime opportunities. Pay: $26 - $45/hour (commensurate with direct experience) Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) Power-Flo Technologies' Pump and Motor Repair Shop in New Hyde Park, NY is seeking an experienced Pump Mechanic to join our team. Pump Mechanic Responsibilities Include : • Assess machinery to accurately diagnose and repair issues, • Liaise with clients to determine their requirements and communicate defects or problems, • Provide routine inspections of equipment and inform clients of any issues, • Keep an accurate log of all work performed, • Install replacement bearings, seals, shafts, and gaskets, • Replace and wire electric motors, • Adhere to company work safety policies, • Complete jobs both in our shop and at job sights, • Respond to work orders for troubleshooting, repair and feedback to Supervisor, • Mechanic will be responsible to make emergency repairs within area of knowledge and responsibility, • Familiarity with hand tools, power tools, disassembly, multimeter, etc. Pump Mechanic Qualifications : • 5+ years' experience in pump mechanics, • Knowledge of pump systems and electric motors, • Ability to work both with a team and independently, • A valid and clean driver's license to operate company vehicles We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Location: On-Site in Garden City Park & Field Work Pay: $26 - $45/hour (commensurate with direct experience) Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM with overtime opportunities. Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) Power-Flo Technologies' Pump and Motor Repair Shop in New Hyde Park, NY is seeking an experienced Pump and Motor Mechanic to join our team. Pump and Motor Mechanic Responsibilities Include : • Assess machinery to accurately diagnose and repair issues, • Liaise with clients to determine their requirements and communicate defects or problems, • Provide routine inspections of equipment and inform clients of any issues, • Keep an accurate log of all work performed, • Install replacement bearings, seals, shafts, and gaskets, • Replace and wire electric motors, • Adhere to company work safety policies, • Complete jobs both in our shop and at job sights, • Respond to work orders for troubleshooting, repair and feedback to Supervisor, • Mechanic will be responsible to make emergency repairs within area of knowledge and responsibility, • Familiarity with hand tools, power tools, disassembly, multimeter, etc. Pump and Motor Mechanic Qualifications : • 5+ years experience in pump mechanics, • Knowledge of pump systems and electric motors, • Ability to work both with a team and independently, • A valid and clean driver's license to operate company vehicles We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description • We are hiring immediately for a full time MAINTENANCE TECHNICIAN position., • Location: Coffee Distributing Corp - 200 Broadway, New Hyde Park, NY 11040. Note: online applications accepted only., • Schedule: Full time schedule. Monday through Friday, 7:00 am to 3:30 pm. Further details upon interview., • Requirement: Previous technical and mechanical experience required. This job may require you to lift up to 50 pounds., • Pay Range: $23.00 per hour to $24.00 per hour., • Additional Job Duties and Responsibilities:, • Repair and refurbish coffee equipment and water coolers., • Diagnose equipment issues through visual inspection and listening tests., • Disassemble machines to identify malfunctions and access problem areas., • Inspect parts for wear, misalignment, or defects; repair or replace components as needed., • Realign, adjust, and test equipment to ensure proper operation after repair., • Prepare machines for installation at customer locations., • Review inventory, order parts, and manage shipping and receiving of machines., • Maintain accurate equipment and parts inventory. About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Summary: Performs a variety of maintenance duties. Essential Duties and Responsibilities May Include: • Maintains, repairs, cleans and operates the plant, shops, mechanical areas, exterior grounds and campus facilities., • Performs basic maintenance duties and repairs as assigned; contacts supervisors, skilled trade vendors or on-call personnel as instructed., • Updates work statuses, timing, and costs of repairs using a variety of company tech systems., • Provides fleet maintenance support including but not limited to welding, plumbing, electrical, food truck kitchen maintenance, driving of vehicles, on campus fleet troubleshooting support, generator fixes, and general maintenance., • Assists in making decisions on all minor and routine repairs; reports major problems to the supervisor, foreman or journeyman., • Cleans sidewalks and parking areas; picks up and disposes of trash, debris, branches and similar items., • Operates electrical and gasoline-powered equipment., • Maintains equipment; performs minor equipment repairs using power and hand tools., • Performs a variety of other unskilled or semi-skilled tasks such as minor carpentry, plumbing, painting, minor electrical work, lamp changing and drywall maintenance., • Responds to emergency problems in the facility; performs emergency repairs as needed., • Maintains logs, performs rounds and completes maintenance work orders, tests and inspections., • Reads, comprehends and transmits complicated detailed instructions verbally and in writing., • Serves as a member of facility's emergency response team., • Performs other duties as assigned. Qualifications May Include: • One year of related experience as a maintenance worker/technician in a similar-sized institution or in a grounds maintenance occupation., • Valid driver's license. Working Conditions: Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Req ID:1517937 Canteen

Industrial Electrician This Jobot Job is hosted by: Cody Timm Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $26 - $36 per hour A bit about us: Our client is a nationwide leader of Fabricated Metal Products in the US. They are hiring for a 2nd-shift Electrician to join their Milwaukee office on a full-time basis! Why join us? • Competitive hourly pay, • Sign-on bonus, • Great medical insurance options, • 401K matching, • PTO and paid-holidays off, • Bonuses, • Life and Disability insurance, • Opportunities for promotions Job Details Responsibilities: As an Industrial Electrician, your responsibilities will include but are not limited to: 1. Installing, maintaining, and repairing electrical wiring, equipment, and fixtures in accordance with relevant codes., 2. Inspecting electrical systems, equipment, and components to identify hazards, defects, and the need for adjustment or repair., 3. Reading and interpreting electrical drawings, blueprints, schematics, and wiring diagrams., 4. Installing and maintaining power controls, panel boards, and power distribution systems., 5. Using a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment., 6. Performing routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, and the physical condition of buildings does not deteriorate., 7. Troubleshooting electrical problems, inspecting circuits and wiring for shielding and grounding, and testing electrical systems for continuity and proper voltage readings., 8. Following strict safety procedures and work methods while performing duties, and ensuring compliance with all applicable safety codes and regulations. Qualifications: To be considered for the Permanent Industrial Electrician role, candidates must meet the following qualifications: 1. Minimum of 3 years of experience as an Industrial Electrician, preferably in the manufacturing industry., 2. Proven experience with industrial and commercial electrical systems, including installing, troubleshooting, and repairing such systems., 3. Proficiency in using electrical instruments and equipment, reading wiring diagrams, and using test equipment and measuring devices., 4. Extensive knowledge of electrical systems, power controls, panel boards, and power distribution systems., 5. Ability to read and interpret technical documents and drawings., 6. Strong problem-solving skills and attention to detail., 7. Excellent communication and teamwork skills., 8. Must hold a valid electrician’s license., 9. High school diploma or equivalent required; further education in electrical engineering or a related field is a plus. If you are a skilled Industrial Electrician with a strong work ethic and a commitment to excellence, we encourage you to apply today. Join our team and help us continue to shape the future of the Fabricated Metals industry! Interested in hearing more? Easy Apply now by clicking the "Apply" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policy

Job DescriptionAt Power-Flo Technologies, you’ll be part of a team that designs and delivers complete switchgear solutions. We are looking for you to join our collaborative team as an Electrical Design Engineer. This is a full-time, on-site role. Primary Function: Responsible for design of electrical panels and schematics to meet customer requirements. Provide panel jobs quotes and estimates. Act as project management on panel jobs. Assist with customer technical support. Post-sales support on core products. Design Engineer Essential Responsibilities • Review engineered contract drawings and specifications for the design of electrical control panels, • Design and layout of electrical panels using AutoCAD Electrical, • Ensure that all panels are being designed and constructed to UL Standards, • Creating Bill of Materials for the sales engineer team, • Create testing procedures for specific projects to be used by shop personnel, • Determine parameters to program variable frequency drives and soft starters, • Provide technical support on the products we manufacture Design Engineer Necessary Qualifications • 3 years+ experience in the design of electrical systems required, • Ability to use AutoCAD for electrical design work., • Hold a degree in the engineering field., • Must have a valid and clean driver's license to travel to job sites and other branches as needed. Design Engineer Physical Requirements • Some Minor Lifting and Moving of Parts and Equipment Salary commensurate with experience in the design of electrical systems (Range from $70,000 - $145,000 annually) Benefits Package • Medical, Dental, Vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Power Your Career in Field IT Are you a hands-on IT professional who enjoys solving problems, working independently, and being on the move? At Pay-O-Matic, you’ll play a critical role in keeping our technology running across retail locations and corporate offices. This is not a desk job—this is a field-based role where your skills make an immediate impact every day. If you’re looking for variety, autonomy, and real-world technical experience, we want to hear from you. Why Join Pay-O-Matic? • Field-based role (not stuck behind a desk), • Hands-on technical experience across multiple locations, • Growth opportunities within IT and operations, • Competitive hourly pay + overtime eligibility, • Mileage reimbursement for travel, • Comprehensive benefits package POSITION SUMMARY The Field IT Technician provides technical support for Pay-O-Matic computer hardware, software and network systems across multiple retail locations and corporate headquarters. This position requires extensive travel to stores throughout the region to perform installation, maintenance, troubleshooting and repair of technology equipment and systems. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Technical Support and Maintenance • Install, modify, monitor, test and troubleshoot computer hardware, software and network problems at Pay-O-Matic retail locations and corporate headquarters, • Provide on-site technical support for maintaining, installing or replacing equipment in stores, • Perform software and hardware upgrades and rollouts as directed by IT Help Desk Manager, • Prepare and tag new equipment for deployment to field locations, • Enter troubleshooting calls into the help desk system (ServicePRO) Field Service Requirements • Travel regularly to retail store locations to perform repairs, installations and troubleshooting (majority of work time spent in the field), • Maintain a valid driver’s license and provide reliable transportation for travel to store locations, • Lift and transport electronic equipment including computers, monitors and related technology, • Complete special projects assigned by IT Help Desk Manager, • Perform other related duties as required QUALIFICATIONS Required Experience and Skills • Minimum one year of related IT support experience, • Valid New York State driver’s license, • Access to a reliable personal vehicle for business travel, • Ability to lift and carry electronic equipment weighing up to 50 pounds, • Strong technical knowledge of computer hardware, software and network systems, • Strong written and verbal communication skills, • Excellent customer service orientation with strong follow-up skills, • Ability to communicate technical information clearly to non-technical users, • Ability to interact effectively with individuals at all organizational levels, • Strong organizational, problem solving and analytical abilities, • Good judgment with ability to make timely and sound decisions, • Flexibility and adaptability to work within constantly changing priorities, • Commitment to excellence and high standards, • Team oriented approach with creative and innovative thinking, • Ability to coordinate multiple tasks simultaneously Language Requirements • Must be able to speak, read, write and understand English, • Bilingual skills (Spanish) are a plus but not required PHYSICAL REQUIREMENTS AND WORKING CONDITIONS • Drive to multiple locations throughout the workday, • Lift, carry and transport electronic equipment weighing up to 50 pounds, • Bend, stoop, kneel and reach to install or service equipment, • Stand or sit for extended periods while performing technical work, • Use hands and fingers to manipulate small components and tools The primary work site is the corporate office. However, this position requires frequent travel to retail locations throughout the region. Work may be performed in various store environments with varying conditions. Occasional evening or weekend work may be required to minimize disruption to store operations. COMPENSATION AND BENEFITS • Hourly Rate: $23.08 – $26.93, • Overtime eligible (non-exempt position), • Mileage reimbursement (IRS standard rate), • Medical, Dental, Vision, Life Insurance, • Sick Leave, • Vacation, • Short-term incentives LOCATION Corporate HQ – 160 Oak Drive, Syosset, NY 11791 (Field travel required) APPLICATION DEADLINE Estimated posting end date: May 1, 2026 This application window is a good-faith estimate of the time that this posting will remain open. This post will be promptly updated if the deadline is extended or the role is filled. Apply Today Take your IT skills beyond the desk—join Pay-O-Matic and make an impact in the field ABOUT PAY-O-MATIC Pay-O-Matic is New York City’s most accessible financial services company, serving communities through check cashing, bill payments, and more across 100+ locations. We are committed to helping both our customers and employees succeed. Learn more: . We are passionate about diversity. Our commitment is to provide an inclusive culture that celebrates the unique backgrounds and perspectives of our global teams while reflecting the communities we serve. We do not discriminate based on race, color, national origin, religion, political affiliation, sex (including pregnancy), sexual orientation, gender identity, age, disability, marital status, or veteran status. The company will provide accommodation to applicants, including those with disabilities, during the recruitment process, following applicable laws.

Job DescriptionJob Title: Machine Operator (Press Brakes, Shear Machine, CNC Turret Punch Press) Company: Power-Flo Technologies Location: New Hyde Park, NY Job Type: Full-Time Reports To: Shop Manager Power-Flo Technologies is seeking an experienced Machine Operator to operate and maintain our press brakes, shear machine, and CNC turret punch press. The ideal candidate will have a strong background in metal fabrication and the ability to produce precise and accurate parts while adhering to PFT’s safety and quality standards. Schedule: This is a full-time position. Monday – Friday, 7 AM – 3:30 PM. Salary Range: $18 - $27/hour Benefits: Health insurance (medical, dental, vision), 401K, EAP, ESOP (Employee Stock Ownership Plan), PTO Program and Paid Holidays Essential Responsibilities • Set up and operate the press brakes, shear, and CNC turret punch press to produce parts according to specifications, • Monitor machine operation making adjustments as needed to ensure quality and efficiency, • Adhere to safety protocols at all times, • Establish and follow maintenance schedules for shop equipment, • Provide technical expertise and troubleshoot machine issues as needed, • Maintain a neat and orderly work area at all times, • Organize and maintain shop tools and equipment, • Willing and able to work OT as required Necessary Qualifications • Previous machine operating experience in a manufacturing setting, • Ability to read mechanical prints and schematics, • Ability to work both independently and in a team setting, • Basic knowledge regarding use of a PC, • Mechanical aptitude, • Attention to detail and commitment to producing high quality work, • Valid and clean NYS driver's license to operate company vehicles as needed Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description • We are hiring immediately for full time SMARTSERVICE ROUTE DRIVER positions., • Location: Melville Canteen - 255 Pinelawn Road, Melville, NY 11747 Note: online applications accepted only., • Schedule: Full time schedule. Monday - Friday, hours may vary. More details upon interview., • Requirement: Experience operating delivery trucks, completing scheduled routes, and ensuring safe and timely deliveries., • Perks: Commission routes! All Canteen driving roles may include commission eligibility. About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Click HERE to see a day in the life of a Canteen Route Driver! Summary: Drives company vehicle over established route to deliver products and maintain inventory. Responsible for the delivery of top-notch service to clients and customers at all times. Essential Duties and Responsibilities: • Prior to beginning each day’s route, ensures that truck is properly loaded with all product required to properly service all scheduled machines following outlined operational procedures., • Maintains proper inventory levels and product distribution for vending machines., • Loads hand cart with totes of product, walks to the machines, and loads the machines. Returns to truck with hand truck of empty totes., • Performs product rotation to ensure freshness at designated client locations for vending machines., • Provides client and customer satisfaction in every aspect of job performance., • Performs routine cleaning and sanitation of vending machines and other related equipment., • Conducts minor service and adjustments on machines. When necessary, reports defective equipment to designated maintenance repair service operators or technician dispatcher., • Maintains accurate machine product and inventory data via a handheld computer., • Informs regular clients and customers of new products or services., • Listens to and resolves service complaints; reports all client and/or customer complaints to immediate supervisor in a timely manner., • Sets up merchandise and sales promotion displays, or issues sales promotion materials to customers., • Accountable for all receipt of goods, invoices, delivery tickets, cash received or collected, and product., • Conducts inventory reconciliation in accordance with established procedures., • Keeps company vehicle clean and organized at all times; performs pre- and post-trip vehicle inspections., • Performs other duties as assigned. Qualifications: • 3 years driving experience required., • Valid driver's license, ensuring safe operation of company vehicles in accordance with traffic laws and conditions., • Preferred 1-2 years’ experience in a customer service position, or a minimum of 1 year of related experience. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Req ID:1514900 Canteen

Job Description Summary: Parabit Systems, a well-established and rapidly expanding company in the security and self-service equipment industries, is currently seeking an experienced, motivated, innovative, problem solver with a comprehensive understanding of all facets of Metal Work and Finishing. Candidates must have a minimum of three (3) years' experience in the field. The applicant must be proficient in fabricating top quality finished products. Applicants must be able to read and review shop drawings. A strong work ethic and personal commitment to quality and service are essential for this position. Adhering to deadlines and time management skills are essential. We are looking for a candidate with excellent communication skills that is highly organized, reliable, trustworthily, and efficacy driven. Primary Responsibilities: • Job duties include grinding, sanding, and filling uneven surfaces, polishing and coating metal, and etching decorative details., • Removes dents, scratches, and defects from metal surfaces using stroke sanders, hand power tools and pneumatic tools., • Operate a variety of machines for metal finishing., • Follow safety instructions including P.P.E. Fill out paperwork to accurately track traceability on all parts., • Ability to read and review fabrication drawings and specifications., • Consistently work within tight tolerances., • Manufacture high quality products., • Very knowledgeable with sanding, preparation, finishing, application, polishing, repair and manual machining techniques., • Exceptionally knowledgeable in various millwork products such as laminates, solid surfacing, painted finishes, and stainless steel., • Must adhere to established procedures/processes/policies., • Self-Motivated, with a strong work ethic. Education/Experience: • High school diploma., • 3 years' experience in metalwork., • Painting or Powder-Coating knowledge a big plus., • Able to work as a team and motivate employees. Parabit Systems is focused on growth and growing leaders. Parabit Systems is an equal opportunity employer, offering a great work environment, and challenging career opportunities. Please email your resume to . Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Power-Flo Technologies is hiring an Entry Level Inside Sales Representative to write orders and guide our customers through product selection of our electrical supplies, electric motors, pumps, controls, power transmission equipment and HVAC controls. Salary Range: $18 - $28/hour (depending on direct industry experience) Benefits Package • Health insurance (medical, dental, vision), • PTO program and paid holidays, • EAP, • 401K, • ESOP (Employee Stock Ownership Plan) Responsibilities include but are not limited to the following: • Supporting outside sales staff by providing customers with proposals on their behalf., • Providing best in class customer service., • Providing product information and keeping regular vendor contact for various reasons i.e. expediting open orders., • Reaching out to customers on an as needed basis to inquire about potential future needs., • Will be up-selling customers who have called to place an order by suggesting additional products that could compliment their needs for the specific job that they are working on., • Working with credit department to inquire and help provide resolution to account financial status for customers. Requirements for the position include but are not limited to the following: • Must be able to handle a high call volume environment., • Must be committed to learning about our business and all the product lines, keeping up to date as well., • Excellent verbal and written communication skills., • Ability to remain professional and focused with customers on the phone and successfully conclude the call despite any challenges presented by the customer., • Must be a Self-motivated and sales driven individual., • Experience with our ERP System that is called Eclipse is a big plus., • Must be able to learn our Windows based and our text command-based ERP System., • 1 - 2 years of experience working with or for Electrical or HVAC contractors is highly preferred., • Valid and clean NYS driver's license to travel to training and to visit vendors (as needed). Physical Ability Requirements (with or without reasonable accommodation) • Ability to sit for prolonged periods of time, • Ability to utilize a computer keyboard, computer monitor, and telephone for prolonged periods of time Learn more about us here: Follow us on LinkedIn: About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Parabit Systems is a full-service engineering, design, integration, and manufacturing company located in the heart of Long Island, just 30 minutes from New York City. Our reach is nationwide, with satellite offices in Miami, Los Angeles, San Francisco, and Chicago. From total security solutions, to self-service kiosks and digital signage, Parabit's mission is to enhance and protect your business. Job Summary: Parabit is seeking a motivated, innovative, problem solver with a comprehensive understanding of all facets of Paint and Finishing Work. Candidates must have a minimum of three (3) years of automotive painting or millwork finishing experience. The applicant must be proficient in fabricating top quality finished products. Applicants must be able to read and review shop drawings. A strong work ethic and personal commitment to quality and service are essential for this position. The position will have direct oversight of the shop environment including employee supervision, production schedules and accountability. Adhering to deadlines and time management skills are essential. We are looking for a leader with excellent communication skills that is highly organized, reliable, trustworthily, and efficacy driven. Requirements: • 3 years' experience in paint/powder coating applications or millwork finishing, • Ability to read and review fabrication drawings and specifications, • Capacity to finish custom products in an efficient manner, • The talent to train employees for job related tasks, • Consistently match colors and finishes within high specifications, • Manufacture high quality products, • Very knowledgeable with sanding, preparation, finishing, application, polishing and repair techniques, • Well educated with paint booth equipment and operations, • Exceptionally knowledgeable in various paint finishes such as lacquers, enamels, urethanes, varnishes, dyes, and powder coating systems, • Knowledgeable in silk screen and vinyl graphic applications, • Must adhere to established procedures/processes/policies, • Self-Motivated, with a strong work ethic, • Able to work as a team and motivate employees Benefits: • Medical, • Dental, • Vision, • 401K, • Group Life, • PTO All employment candidates must pass: a NON-DOT Drug screening, Criminal and Credit Background Check and a Driver License Check prior to employment.

Job Description Job Title: Technician III, Facility Maintenance (1st shift) Department: Engineering Job Purpose: Performs trouble shooting, repair, preventive, and corrective maintenance of facility equipment and building systems in assigned area(s) (may include: Utilities, facilities, and HVAC); Maintains key building systems (sprinklers, BMS, etc.), site utilities (boilers, chillers, USP water, HVAC, etc.), and building fabric. Major Accountabilities: Ensures all work carried out and equipment installed is safe, effective and in compliance with the appropriate industry and regulatory (FDA, DEA, OSHA) standards Continuously improves and broadens skills by participating in or initiating training Support Projects Involving New Equipment: advise Project Manager on the quality and suit-ability of proposed equipment, review equipment layouts, work with vendors, assist with validation efforts, write appropriate PM procedures, advise on which spare parts to procure, train teammates, etc. Note: This position may require the labeling, packaging or movement of hazardous (flammable, corrosive, toxic, etc.) waste within the facility. If so, this employee would be trained under OSHAs Hazwoper standard, 29 CFR 1910.120 as an 8-Hour first responder, 24-Hour incident commander, or a 40-Hour incident commander. In lieu of HAZWOPER training, the employee will receive training on the requirements of the Resource Conservation and Recovery Act pursuant to 40 CFR 265.16. All employees that have received the above-mentioned training upon hire will receive annual re-fresher training that covers the Osha Hazwoper standard and the requirements of RCRA. Education: Associate degree in related field or technical equivalent required. Languages: Fluent in written and spoken English Experience: Minimum 6 years of work experience in manufacturing or maintenance environment is required. Experience in regulated environments such as pharmaceutical, medical device, food and beverage is preferred. Key Performance Indicators (Indicate how Performance for this Role will be Measured): Basic Microsoft Office Skills (Word, Excel and Visio) Fluent in English good communications skills both verbal and written, ability to read and understand SOPs and all forms of training materials. Must be available for overtime when needed, including evenings and weekends. Availability for emergency telephone support and call in rotation. Must be able to work in all areas of both Hicksville and Melville Facilities and follow gowning requirements where specified. Must be able to climb ladders and stairs, work in and through construction areas and lift 50 pounds.

Job Description ✨ Engineering Test Technician – Launch Your Career in Aerospace! ✨ Are you passionate about electronics, love solving complex problems, and want to work hands‑on with cutting‑edge aerospace technology? Join our team as an Engineering Test Technician and take your career to new heights—literally. In this role, you’ll be at the heart of aerospace innovation, performing component‑level troubleshooting, electrical testing, and repair on advanced equipment that supports aircraft such as Boeing, Airbus, and Apache Helicopters. If you're a graduate with strong electronics training or a technician eager to grow, this is your opportunity to step into a high‑impact role. 🔧 What You’ll Do • Perform component‑level troubleshooting and repair of electrical components., • Conduct military‑grade electronics testing using oscilloscopes, multimeters, power supplies, and more., • Troubleshoot and support temperature control and deicing systems used in major aircraft platforms., • Read and interpret electrical schematics and technical documentation., • Document test findings, complete accurate data sheets, and write up non‑conformances., • Work hands‑on in a fast‑paced, collaborative engineering environment., • Dedicate 50–75% of your workday to testing and troubleshooting activities.✅ What You Bring, • 3+ years of Electrical Technician experience in aerospace or a military environment, • OR, • A graduate with formal military electronics training or an associate/technology degree in electrical engineering who is ready to dive in and learn quickly., • Proficiency with standard test equipment:, • • Oscilloscopes, • • Digital multimeters, • • Power supplies, • Strong understanding of electrical circuits, testing fundamentals, and safety protocols., • Ability to read schematics, blueprints, and technical diagrams., • Strong communication skills for documenting test results, data sheets, and non‑conformances., • Must be able to work a full‑time, 40‑hour workweek.⭐ Preferred Qualifications, • BSEE or equivalent engineering degree., • Previous experience working with aerospace electronic systems, temperature controls, or deicing units. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Plainview,NY. Application Deadline This position is anticipated to close on Apr 4, 2026. Diversity, Equity & Inclusion At Actalent, diversity and inclusion are a bridge towards the equity and success of our people. DE&I is embedded into our culture through: • Hiring diverse talent, • Maintaining an inclusive environment through persistent self-reflection, • Building a culture of care, engagement, and recognition with clear outcomes Our Bangalore, Hyderabad, Pune, and Chennai delivery centers are hubs of engineering expertise, with core capabilities in mechanical and electrical engineering, systems and software, and manufacturing engineering. Our teams deliver work across multiple industries including transportation, consumer and industrial products, and life sciences. We serve more than 4,500 clients, including many Fortune 500 brands. Learn more about how we can work together at actalentservices.com.

Job DescriptionDescription: Who We Are United Ag & Turf NE is a John Deere Dealership with multiple locations across the Northeast. We service customers in a variety of industries such as commercial, construction, agricultural, as well as consumers. United Ag & Turf strives for exceptional customer service throughout all our locations and departments including parts, sales, and service. United sees an incredible opportunity in the Northeast to continue to expand the John Deere brand. We will continue to invest heavily in the region, building new facilities, updating and upgrading operations and empowering the business to continue to bring on talented, hardworking people to the team. United Ag & Turf is a sister company to United Construction & Forestry, so the opportunities for our employees to leverage career growth and advancement are endless. We invite you to join us now, as this is just the beginning. What You’ll Get • Bonus Program, • Training through John Deere University, • Tool Reimbursement, • A comprehensive employee benefits plan that includes medical, dental, vision, and 401K Match, • Referral Bonus, • Earned PTO, • Employee Assistance Program, • Paid Company holidays, • Company Paid Life Insurance, • Great Work/Life Balance, • Opportunities for advancement Schedule: Monday – Friday 1st shift – Saturdays as needed United Ag & Turf NE is looking for a Service Technician. This individual will be responsible for the effective diagnosis and repair of engine components including small engines, agricultural equipment, and other equipment sold in the market area. Their work must be completed safely, professionally, and in a timely manner. If you’re the kind of person who strives to do great work, excels in creative team environments, and lives for problem-solving this is the place for you. What You’ll Do • The successful candidate will perform complex diagnostics, service repairs, and maintenance work on customer and/or dealer-owned equipment., • Work must be completed at high levels of quality and safety., • Daily duties will include some customer contact, diagnosing, troubleshooting using diagnostic tools, and making repairs.Requirements:, • Must own and maintain their own tools (specialty tools provided by dealership), • Basic computer skills, • Ability to assemble and perform maintenance functions, • Able to work a varying work schedule/shift and be flexible to respond to after-hour calls, • Strong customer service skills, • Excellent oral communication and written skills, • A minimum of 2-3 years’ experience as a mechanic working on small engines, diesel and gas engines, and small handheld components The physical demands described here are representative of those that must be met by employees to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of the job, the employee is required to stand, sit, talk, hear and use hands and fingers to operate a computer keyboard and telephone, • Specific vision abilities required by this job include close vision requirements, • Hearing ability is sufficient to communicate with others in person or over the phone, • Light to moderate lifting may be required (up to 50 pounds), • Ability to reach, stoop, kneel, and bend as needed

Job DescriptionDescription: Who We Are United Ag & Turf NE is a John Deere Dealership with multiple locations across the Northeast. We service customers in a variety of industries such as commercial, construction, agricultural, as well as consumers. United Ag & Turf strives for exceptional customer service throughout all our locations and departments including parts, sales, and service. United sees an incredible opportunity in the Northeast to continue to expand the John Deere brand. We will continue to invest heavily in the region, building new facilities, updating and upgrading operations and empowering the business to continue to bring on talented, hardworking people to the team. United Ag & Turf is a sister company to United Construction & Forestry, so the opportunities for our employees to leverage career growth and advancement are endless. We invite you to join us now, as this is just the beginning. What You’ll Get • Bonus Program, • Training through John Deere University, • A comprehensive employee benefits plan that includes medical, dental, vision, and 401K Match, • Referral Bonus, • Earned PTO, • Employee Assistance Program, • Paid Company holidays, • Company Paid Life Insurance, • Great Work/Life Balance, • Opportunities for advancement Schedule: Monday – Friday 1st shift – Saturdays as needed United Ag & Turf NE is looking for a Service Manager who will be responsible for managing the operations of the Service Department at the branch to provide the highest level of external and internal customer satisfaction. You will work closely with other leaders and employees in the store to ensure building operations remain safe, secure, and well-maintained. What You’ll Do • Manage service repairs and assign jobs and work areas to employees in the Service Department according to their skills and knowledge, • Ensures timely completion & invoicing of all service repair orders to maximize department profits and customer satisfaction, • Resolves elevated customer issues as needed with a high level of customer service; escalating if needed, • Participate in regular team meetings between department managers to identify and implement ways to foster teamwork between departments at their branch location, • Assist in the development and execution of effective Service Department policies and processes, • Create annual branch Service Department forecast & goals, in alignment with financial & operational objectives, • Execute the Service Department’s strategic & marketing plans and regularly review progress to ensure achievement of goals, • Effectively communicates with the Corporate Service Manager, branch Parts Manager and branch personnel, • Responsible for hiring, training and development of service personnel, • Complete performance reviews of service personnel and deliver appropriate corrective action and discipline as needed, • Ensure all department tools, equipment and vehicles are in good working order, • Identifies and develops new customer and business opportunities to achieve department growth, • Excellent customer service skills and follow through ability, • Familiar with the equipment industry, John Deere and competitive products preferred, • General understanding of mechanical/technical terms, and knowledge of methods, materials, tools, and techniques used in the repair of customer and dealer owned equipment, • Ability to manage personnel and adhere to company policies and procedures, • Ability to use standard desktop load applications, email, internet functions and Service Advisor, • Ability to work varying shifts, weekends, and holidays or as needed for an on-call rotating basis, • Ability to write and speak effectively to individuals and groups, • High level of attention to detail and accuracy of information, • Solid understanding of financial principles relative to Service Department operations and company business systems, • Ability to create, analyze and interpret internal reports and provide feedback with areas of improvement, • Exhibits necessary skills to effectively manage a fast-paced environment, • Exhibits strong desire to expand personal development, • Ability to work within and promote a strong team environment across all departments, • Exhibits a willingness to accept additional assignments, • Achieves and maintains forklift certification, • Ability to travel for customer service and training as needed The physical demands described here are representative of those that must be met by employees to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Maneuver on/under heavy equipment and around construction/agricultural sites with loose-footing and irregular terrain., • Operate a motor vehicle both day and night., • While performing the duties of the job, the employee is required to stand, sit, talk, hear and use hands and fingers to operate a computer keyboard and telephone, • Specific vision abilities required by this job include close vision requirements, • Hearing ability is sufficient to communicate with others in person or over the phone, • Light to moderate lifting may be required (up to 50 pounds), • Ability to reach, stoop, kneel, and bend as needed

Job DescriptionAre you a highly motivated and reliable Assembly Technician? Are you looking for a collision repair company that values People and Processes while working alongside those with a Passion for auto repair? This is your opportunity! If you are tired of the mediocre shop, allow us to take you out of the average and put you into the future of the collision repair business. Each teammate is a valued part of the repair process. We support each team member with the tools and support needed to succeed: state-of-the-art collision repair equipment, tools and all the training you can handle. You will expand your skills while being paid! What’s in it for you? * Medical, Dental, and vision insurance for you and your family (including domestic partners) * $50,000 employer-paid life insurance policy * 401K plan with an employer match * Employee Assistance Program includes confidential assistance in the following areas * Counseling from relationships to stress and substance abuse * Work/Life benefits, including personal, financial, and legal issues * Self-Help benefits * Peak performance coaching * Lifestyle saving benefits for wellness, shopping, travel * Personal development and training * Heath savings account to assist with medical bills * Paid time off to promote work-life balance * 8 paid holidays, including Black Friday, and get your Birthday as a floating holiday! * Growth opportunities within our company * Paid training including industry certifications, I-Car & OEM The specific pay rate/salary offered to a candidate may be influenced by several factors including experience, education, specialized certifications from OEMs, and where the job is located. Technician Specific Benefits * Shop equipped with the newest technology and equipment * Uniforms provided * Work environment OSHA certified to current quality standards * Market competitive wages and pay structures The Disassembly & Reassembly Technician is responsible for disassembling, inspecting, and assessing vehicles for additional or hidden damage. Once the vehicle is ready, the technician will reassemble the vehicle. Job Requirements: * Follow the company blueprinting process and disassembly procedures (DFR) for all vehicle inspections * Disassemble vehicles after the initial estimate, inspect all vehicles for internal structure and parts from the initial inspection (estimate), and identify additional damage * Complete disassembly of the vehicle to assist estimators in assessing damage to prepare a 100% repair plan * Document and record additional damage and required parts on a damage report (including blend panels, small parts, on-time use fasteners, moldings, etc.). * Notify the production manager/estimator regarding supplements based on additional damage/parts discovered * Assist the metal technician with reassembly upon completion of the repair, as needed * Perform light non-structural repairs – light finishing, sanding, minor bumper repairs, etc. * Reassemble vehicle – replace final moldings, trim, and detail pieces * Perform assigned duties safely and responsibly that does not expose yourself or other employees to unnecessary risk of injury * Other duties as assigned Skills, Qualifications & Requirements: * At least one year of auto body repair experience * Must be at least 18 years of age * HS Diploma or GED, Auto Body Vo-Tech certification strongly preferred * Ability to effectively communicate with others * Ability to read and understand basic instructions, written estimates, and work orders * Multi-tasking; adapt easily to fast-paced environments Physical Requirements: * Ability to stoop, bend, squat, kneel and pull * Extended periods of kneeling, bending, squatting, and stooping to complete or inspect repairs * Carry and lift heavy objects (up to 80lbs) * Manual dexterity and eye/hand coordination to operate equipment * Performing repetitive motions We are an equal opportunity employer and consider all qualified applicants equally regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status.

Job Description If you know the sound of a spindle, the smell of cutting oil, and the satisfaction of fixing a machine that others cannot, you will fit right in at Schivo Medical. We keep the world’s most advanced CNC machining and precision manufacturing equipment running at peak performance. Our teams work with 5-axis mills, Swiss machines, EDM, lasers, and other high-end systems that produce critical components for medical and life science customers. We partner directly with leading OEMs and service providers, so every repair, calibration, and upgrade keep production moving and customers confident. Schivo is growing fast, with opportunities to build your skills across different technologies and move up or across into new roles. We are a team that values problem-solvers who can roll up their sleeves, think on their feet, and keep complex machines humming. Shift hours:4pm to 1:30am CNC Machine Operator Position Overview: Operate CNC Machine Operator and inspect finished parts. Essential Duties and Responsibilities: • Verify components are produced to print (dimensional and visual inspection), • Change tools., • Make offsets., • Load material and remove scrap., • Fill out various paperwork., • Simultaneous operation of multiple machines, • Minor troubleshooting, • 2/4 years’ experience with lathe/mill turning machines., • Experience using the Fanuc control preferred., • Must have the ability to read and interpret engineering drawings and blueprints (GD&T symbols)., • Working knowledge of various materials & tools (inserts, endmills, drills Etc.), • Ability to work independently with minimal supervision., • Good communication skills and positive can-do attitude, • Must be dependable and possess a willingness to learn new techniques., • mechanically inclined, • 401(k), • Dental insurance, • Health insurance, • Vision Insurance, • Generous Paid time off, • Life Insurance, • Short/Long disability, • Employee referral program, • EAP program, • Employee discounts, • Summer and holiday events Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status. "No sponsorship to work in the United States"

Job Description Rallye Mercedes, Long Island’s premier Mercedes-Benz dealership, is seeking an experience Sprinter Technician! Seeking motivated, reliable individuals looking to join a team whose values are based in teamwork and delivering the highest caliber of customer service. Responsibilities for this position include: • Perform work as described on repair order with efficiency and accuracy, in accordance with Mercedes Benz factory and Rallye Mercedes Benz standards., • Diagnose the cause of vehicle malfunctions, and recommend/ perform appropriate repairs, • Examine vehicles to identify necessary repair or maintenance items that may not be included on the repair order, and communicate to service advisors., • Communicate with the Parts Department to obtain needed parts., • Notify the foreman immediately if additional work is needed, if work outlined on repair order is not needed, or if repairs cannot be completed by the time promised., • Clearly and accurately document all work performed. Requirements • Diesel, Sprinter or Truck experience required., • 3-5 years of Mercedes Benz Sprinter experience strongly preferred., • Clean and valid NYS Driver's License., • Ability to read, and comprehend instructions and information., • Professional personal appearance., • Proficient in Netstar, Xentry & WIS., • 40 hour guarantee + aggressive production bonus plan!, • Dealer supplied toolbox!, • On & off site Mercedes Benz training & online training., • Climate controlled shop with updated, state-of-the-art equipment!, • Great benefits package including medical, dental and vision coverage for employee & family., • Company paid life insurance and additional optional coverage., • Additional voluntary benefits including Aflac and LegalShield., • Paid time off + holidays off!, • 401K plan., • Voluntary short-term and long-term disability coverage available., • Opportunities for growth., • Employee Assistance Program (EAP). Pay: $20 - $40 Hourly + Commission

Job Description Job Title: Machine Maintenance Engineer Manager 1st Shift Location: Garden City, NY, US, 11530 Position Summary: The Machine Maintenance Engineer Manager ensures safety is the top priority while supporting Production needs. This hands-on role oversees the installation, repair, and upkeep of facilities, equipment, and offices. The ideal candidate has detailed knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) and excels at designing maintenance procedures, tracking budgets, performing inspections, and executing repairs. Supervisory Responsibilities: • Supervise and mentor employees in the maintenance department., • Train team members in equipment maintenance, safety procedures, and operational efficiency.Duties and Responsibilities:, • Maintain a safe and compliant work environment while meeting production needs., • Work independently or collaboratively with the team to complete tasks efficiently., • Perform routine inspections and maintenance across the production floor., • Monitor, troubleshoot, and repair production and process equipment., • Coordinate with contractors to obtain repair information, parts, and procedures., • Design and implement maintenance procedures; track budgets and expenses., • Facilitate property insurance audits and implement corrective actions as needed., • Negotiate contracts with external vendors for maintenance services., • Ensure operational efficiency of electrical, mechanical, and HVAC systems., • Maintain company facilities in a clean and hygienic condition., • Maintain, troubleshoot, disassemble, and repair production equipment safely., • Perform alignments, lubrication, coolant changes, and other routine machine maintenance., • Demonstrate versatility across multiple systems and trades.Electrical, HVAC, & Plumbing:, • Basic knowledge of electrical systems (DC and AC, 24V–480V)., • Ability to read, interpret, and modify electrical schematics and prints., • Experience with ladder logic, PLCs, VFDs, and instrumentation/control devices., • Familiarity with gas/oil heating systems, air handlers, condensers, and evaporators.Safety:, • Promote and enforce a safety-first culture on the production floor., • Knowledge of Lockout/Tagout, Arc Flash, Machine Guarding, HazCom, DOT, RCRA, and material handling.Leadership:, • Strong problem-solving, analytical, and decision-making skills., • Ability to manage multiple priorities in a fast-paced environment., • Demonstrated success leading, motivating, and coaching diverse teams., • Excellent written and verbal communication; able to interact effectively at all levels.Education and Experience:, • Bachelor’s degree required., • 5–10 years of experience in manufacturing maintenance or equivalent training., • Background in general maintenance of manufacturing machines and process equipment (automated systems, chillers, air compressors, hydraulics, pneumatics)., • Proficiency with hand and power tools., • Experience with MS Office preferred.Physical Requirements:, • Ability to lift 50 lbs., • Active role requiring standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some tasks. Pay Details: $120,000.00 to $140,000.00 per year Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionNow Hiring – Be part of the future of electric vehicles! The LGES‐HONDA Joint Venture is bringing the power! A major transformation is happening in the auto industry, and we are leading the way. Established in 2023, we manufacture high‐quality lithium‐ion EV batteries and storage solutions—building tomorrow’s clean‐energy future, today. We’re committed to creating a workplace where every associate is valued, supported, and empowered. If you’re ready to help shape the next generation of electric vehicles, we want you on our team!Now Hiring – Be part of the future of electric vehicles!\r\nThe LGES‐HONDA Joint Venture is bringing the power! A major transformation is happening in the auto industry, and we are leading the way. Established in 2023, we manufacture high‐quality lithium‐ion EV batteries and storage solutions—building tomorrow’s clean‐energy future, today.\r\nWe’re committed to creating a workplace where every associate is valued, supported, and empowered. If you’re ready to help shape the next generation of electric vehicles, we want you on our team!

Job Description Schivo Medical, a contract manufacturer on Long Island, manufactures a diverse range of essential medical technology solutions and is seeking to hire a CNC Maintenance Mechanic. While working for Schivo Medical, you will be part of a company that is committed to keeping a clean working environment and that helps their employees build a fulfilling and rewarding career. Come build your skills and work with the top professionals in CNC Production today. CNC Maintenance Mechanic job overview: The Service Technician is responsible for repairing and maintaining complex CNC machinery and mechanical / electrical equipment for manufacturing medical and firearm components. He ensures maximum equipment efficiency and effectiveness. CNC Maintenance Mechanic Essential Duties and responsibilities: • Must be able to change ball screws, guide rails, and align spindles using indicators., • Trouble shoot issues & perform all repair, modifications, adjustments, and preventive/predictive and routine maintenance on production equipment- CNC machines (i.e., Tornos Deco2000), • Troubleshoot issues and repair failures of production equipment. Electrical Repairs and / or replacement of control devices, including circuit boards and memory devices Assist Operation with analyzing deviations and definition of machine related corrective actions., • Initiate repairs and modifications as a function of Continuous Improvement and process stability (e.g., 5S and Preventive Maintenance). High school diploma or GED required. Associate’s degree in industrial maintenance or similar 2-year technical degree in a related field preferred not required. 5+ years field knowledge as a multi-craft technician in the following fields: CNC Repair, Mechanics, Industrial Electrical systems, Electronics, Hydraulics, Pneumatics, and PLC. Strong repair background. Language Skills: Ability to read and interpret documents and drawings (e.g., blueprints, manuals, wiring diagrams etc.) Must be able to work in a team environment. Physical requirements: • Ability to stand for several hours., • 401(k), • Dental insurance, • Vision Insurance, • Health insurance, • Generous paid time off, • EAP program, • Employee referral program, • Life Insurance

Job Description Location: Field Work LI and NYC. Clock in and clock out in Garden City Park. Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM with overtime opportunities. Pay: $26 - $45/hour (commensurate with direct experience) Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) Power-Flo Technologies' Pump and Motor Repair Shop in New Hyde Park, NY is seeking an experienced Field Mechanic to join our team. Field Mechanic Responsibilities Include : • Assess machinery to accurately diagnose and repair issues, • Liaise with clients to determine their requirements and communicate defects or problems, • Provide routine inspections of equipment and inform clients of any issues, • Keep an accurate log of all work performed, • Install replacement bearings, seals, shafts, and gaskets, • Replace and wire electric motors, • Adhere to company work safety policies, • Complete jobs both in our shop and at job sights, • Respond to work orders for troubleshooting, repair and feedback to Supervisor, • Mechanic will be responsible to make emergency repairs within area of knowledge and responsibility, • Familiarity with hand tools, power tools, disassembly, multimeter, etc. Field Mechanic Qualifications : • 5+ years' experience in pump mechanics, • Knowledge of pump systems and electric motors, • Ability to work both with a team and independently, • A valid and clean driver's license to operate company vehicles We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionBuild a career keeping utility equipment mission-readyWhy this role • Work on specialized utility assets—boom trucks/cranes, bucket and dump trucks, digger derricks, and utility trucks—supporting essential infrastructure., • Hands-on exposure to leading chassis platforms: Freightliner, Peterbilt, International, Mack, Ford, Chevrolet, RAM., • Blend disciplines: hydraulics (cylinders, hoses, PTOs, blueprint reading) and electrical (wiring, schematics, multimeter, CANBus)., • Experience with diesel truck-mounted hydraulic utility equipment—such as aerial devices, digger derricks, and cranes—is a strong plus.What you’ll do, • Diagnose and correct hydraulic fluid power and pneumatic tool faults, • Troubleshoot diesel engines and aftertreatment systems using Quick Serve, DTNA, and related diagnostic platforms, • Inspect, assess, and repair equipment across multiple manufacturers, • Dismantle/reassemble heavy components with appropriate tools and procedures, • Functionally test and verify equipment to specification, • Perform DOT, ANSI, and dielectric testing, • Execute routine PMs and uphold work area and vehicle cleanliness, • Document parts usage, services performed, and labor for cost control, • Follow all safety procedures and attend monthly safety meetings, • Maintain CDL eligibility (CDL preferred)Schedule, pay, and growth, • Monday–Friday, 7:00 am–3:30 pm; overtime as needed, • Competitive compensation commensurate with experience, • Opportunities to broaden your skill set across hydraulic, mechanical, electrical, and testing disciplinesWho should apply, • All experience levels: journeyman techs, Vo-Tech graduates, veterans (wheeled/track, aircraft, generator, maintenance), and mechanics from construction/agricultural backgrounds, • Minimum of 3 years of related experience, • High school diploma or equivalent, • Personal tool set required, • Valid driver’s license; CDL a plusBenefits that support you, • 401(k) with employer match, • Comprehensive health care (medical, dental, vision, life), • Paid vacation, sick time, and holidays, • Short- and long-term disability (STD/LTD), • Employee Stock Purchase Plan, • Partner discounts, • Tuition reimbursementTechnical strengths we value, • Electrical systems diagnostics & repair; CANBus troubleshooting, • Engine performance & drivability; diesel engine systems, • Brake & suspension; transmission & drivetrain systems, • ASE Automobile and Light Truck Certification Tests, • Engine repair; automatic transmission/transaxle, • Suspension and steering; light vehicle diesel engines, • Advanced engine performance; oil changes, • Vehicle & fleet weldingEquipment & platforms you’ll touch, • Diesel engines and diesel vehicles, • Box trucks No work sponsorship available.

Job Description WHO WE ARE: How will transportation and mobility evolve? What will the vehicle of the future look like – and how will those vehicles be repaired? How can the next chapter of your career contribute to solving these transportation challenges and more? NexaMotion Group (NMG) is on a mission to simplify complex vehicle repair to keep the world moving. We are a leading automotive parts distributor represented across the U.S., Puerto Rico, and Canada, and through patent-winning software and technology, we are revolutionizing our industry. What has remained constant throughout our 50-year history of transformation is our dedication to our customers, our team members, and to the values on which NMG was founded: Commitment, Humility, Optimism, Integrity, and Respect. A career with NMG offers the opportunity to make an impact within a rapidly growing organization – the chance to learn, lead, collaborate, and connect with other solutions-oriented, forward-thinking professionals. We invest meaningfully in training and development, empowering you to build your future alongside ours and shape a career unique to your talents, interest, and purpose. THE OPPORTUNITY: General Warehouse associates are an essential part of MNG;s distribution network. They load and unload trucks, move material within the facility and from the loading platform by carrying, pushing, rolling or operating hand trucks, hoists, motorized conveyors, or other material handling equipment. Picking, pulling and filling orders is an essential part of our business and this position. This position also requires individuals to stock and maintain warehouse inventory and fill outgoing orders so products are accurately pulled from stock, labeled, boxed and wrapped. There are many physical demands for this position. Individuals will spend the majority of their time standing, lifting and carrying products and climbing ladders to stock shelves and fill orders. KEY FUNCTIONS & RESPONSIBILITIES: • Pull and fill stock orders for outgoing deliveries., • Separate, label and verify the count of incoming freight deliveries., • Package finished product for shipping (shrink wrapping, boxing, and labeling)., • Use the computer system to locate products and stock incoming deliveries., • Clean and maintain work area., • Turn off and lock out equipment when not in use., • Some overtime work may be scheduled and required., • High School Diploma, GED, or equivalent experience., • Prior work experience in a warehouse or distribution center is preferred., • Experience using a materials requirement planning system (MRP) such as AS400., • Strong Computer skills., • Must be able to lift up to 50 lbs., • Ability to effectively communicate with co-workers to aid in satisfying customer requirements., • Ability to perform basic mathematical calculations in order to accurately complete job tasks., • Benefits (Medical, Dental, Vision, 401k, etc.) available after 90 days., • Paid Time Off., • Tuition Reimbursement., • Clean, safe working environment., • Opportunities for career growth. WORK ENVIROMENT: The work environment characteristics described here are representative of those an associate encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an associate to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job the associate is regularly required to talk or hear. The associate is regularly required to sit, stand or walk. The associate is occasionally required to use hands to finger, grasp, handle or feel; climb; balance; stoop; kneel; crouch; push or pull; and reach with hands and arms. The associate must occasionally lift and/or move up to 50 pounds.

Job Description Job Description: We are seeking a mechanic to repair and maintain diesel engine industrial trucks according to dealership and factory specifications. Individual must have electrical troubleshooting skills and strong computerized electrical system diagnostic capabilities Responsibilities: • Performs work as outlined on repair order with efficiency and accuracy, in accordance with dealership and factory standards., • Diagnoses cause of any malfunction and performs repair., • Examines assigned vehicle to determine if further safety or service work is required or recommended., • Documents all work performed and recommended on the repair order., • Participates in manufacturer sponsored training programs, schools, and events., • Keeps abreast of manufacturer technical bulletins., • Maintains and is accountable for all dealership-owned tools and manuals. Returns them to the proper place and in the same condition as when they were received., • Understands, keeps abreast of, and complies with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc., • Operates all tools and equipment in a safe manner., • Computer skills, including, but not limited to: Microsoft Office, • CDL is a plus, • Must have own tools, • Be motivated, proactive, focused and well organized, • Maintain high level of professionalism, • At least 3 years of experience or more Gabrielli Truck Sales is an Equal Opportunity Employer. We value a diverse and inclusive working atmosphere. In furtherance of our culture, all qualified applicants will receive consideration for employment without regard to pregnancy, race, national origin, gender, age, religion, disability, sexual orientation, veteran status, marital status or any other characteristics protected by law. Gabrielli Truck Sales provides reasonable accommodations for employees and applicants with disabilities or pregnant consistent with applicable law. If you need a reasonable accommodation during the application process, please let us know. Benefits: • Medical and Dental plan, • Paid Holidays, • Paid vacation and sick/personal time, • 401k with an employer match, • EMPLOYER Paid Life insurance benefit, • Gym Reimbursement program

Job DescriptionDescription: Hiring Bonus - $2,500 paid on date of hire and $2,500 paid on 6-month anniversary. Who We Are United Ag & Turf NE is a John Deere Dealership with multiple locations across the Northeast. We service customers in a variety of industries such as commercial, construction, agricultural, as well as consumers. United Ag & Turf strives for exceptional customer service throughout all our locations and departments including parts, sales, and service. United sees an incredible opportunity in the Northeast to continue to expand the John Deere brand. We will continue to invest heavily in the region, building new facilities, updating and upgrading operations and empowering the business to continue to bring on talented, hardworking people to the team. United Ag & Turf is a sister company to United Construction & Forestry, so the opportunities for our employees to leverage career growth and advancement are endless. We invite you to join us now, as this is just the beginning. What You’ll Get • Bonus Program, • Training through John Deere University, • Tool Reimbursement, • A comprehensive employee benefits plan that includes medical, dental, vision, and 401K Match, • Referral Bonus, • Earned PTO, • Employee Assistance Program, • Paid Company holidays, • Company Paid Life Insurance, • Great Work/Life Balance, • Opportunities for advancement Schedule: Monday – Friday 1st shift – Saturdays as needed United Ag & Turf NE is looking for a Service Technician. This individual will be responsible for the effective diagnosis and repair of engine components including small engines, agricultural equipment, and other equipment sold in the market area. Their work must be completed safely, professionally, and in a timely manner. If you’re the kind of person who strives to do great work, excels in creative team environments, and lives for problem-solving this is the place for you. What You’ll Do • The successful candidate will perform complex diagnostics, service repairs, and maintenance work on customer and/or dealer-owned equipment., • Work must be completed at high levels of quality and safety., • Daily duties will include some customer contact, diagnosing, troubleshooting using diagnostic tools, and making repairs.Requirements:, • Must own and maintain their own tools (specialty tools provided by dealership), • Basic computer skills, • Ability to assemble and perform maintenance functions, • Able to work a varying work schedule/shift and be flexible to respond to after-hour calls, • Strong customer service skills, • Excellent oral communication and written skills, • A minimum of 2-3 years’ experience as a mechanic working on small engines, diesel and gas engines, and small handheld components The physical demands described here are representative of those that must be met by employees to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • While performing the duties of the job, the employee is required to stand, sit, talk, hear and use hands and fingers to operate a computer keyboard and telephone, • Specific vision abilities required by this job include close vision requirements, • Hearing ability is sufficient to communicate with others in person or over the phone, • Light to moderate lifting may be required (up to 50 pounds), • Ability to reach, stoop, kneel, and bend as needed

Job Description Location: On-Site in Garden City Park & Field Work Pay: $26 - $45/hour (commensurate with direct experience) Schedule: Full-Time. Monday - Friday, 7 AM - 3:30 PM with overtime opportunities. Benefits: Health insurance (medical, dental, vision), EAP, PTO, paid holidays, 401K, ESOP (Employee Stock Ownership Plan) Power-Flo Technologies' Pump and Motor Repair Shop in New Hyde Park, NY is seeking an experienced Mechanic to join our team. Mechanic Responsibilities Include : • Assess machinery to accurately diagnose and repair issues, • Liaise with clients to determine their requirements and communicate defects or problems, • Provide routine inspections of equipment and inform clients of any issues, • Keep an accurate log of all work performed, • Install replacement bearings, seals, shafts, and gaskets, • Replace and wire electric motors, • Adhere to company work safety policies, • Complete jobs both in our shop and at job sites, • Respond to work orders for troubleshooting, repair and feedback to Supervisor, • Mechanic will be responsible to make emergency repairs within area of knowledge and responsibility, • Familiarity with hand tools, power tools, disassembly, multimeter, etc. Mechanic Qualifications : • 5+ years experience in pump mechanics, • Knowledge of pump systems and electric motors, • Ability to work both with a team and independently, • A valid and clean driver's license to operate company vehicles We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Our New Hyde Park shop is looking for a Machinist (manual lathe) to join the team. You will perform typical duties of a traditional manual machinist working with horizontal lathes, vertical milling machine, general machine shop equipment: band saws, Bridgeport drill presses, grinders, as well as some welding. Monday - Friday, 7 AM - 3:30 PM. Machinist Essential Responsibilities • Set up and operate conventional lathes, mills, balancing equipment, and commutator profiler, • Ability to machine housings, shafts, keyways, and sleeves, • Must be familiar with common industry tolerances and fits for motor repair, • Fabricate products to meet established quality standards and the requirements of our customers, • Establish and follow maintenance schedules for shop equipment, • Provide technical expertise as needed, • Maintain a neat and orderly work area at all times, • Organize and maintain personal and shop tools and equipment, • Willing and able to work OT as required Machinist Necessary Qualifications • Manual Lathe experience required, • 5 years' mechanical assembly and disassembly experience, • Ability to read mechanical prints and schematics, • Ability to work independently and in a team setting, • Basic knowledge regarding use of a PC, • Competent with the use of electrical test equipment, i.e. Multi meter, shop tools, hand tools, pneumatic tools, hoists, etc., • Mechanical aptitude and basic understanding of electrical theory required, • Valid and clean NYS driver's license to operate company vehicles as needed Physical Requirements • Ability to Stand for 8 Hours, • Ability to lift 50 pounds, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions Salary Commensurate with Experience (Range between $22 - $38/hour) Benefits • Health insurance (medical, dental, vision), • 401K, • PTO Program and Paid Holidays, • EAP, • ESOP (Employee Stock Ownership Plan) We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS. The Power-Flo Technologies family of companies include United Electric Power, Aetna Electric, Long Island Electrical Distributors, Electric Switchboard Solutions, Misa Plumbing, Axis NJ LLC, Power-Flo Pumps and Systems, US Energy Group, Dittman and Greer, AAI, United-Richter, Twinco, Nassor Electric

Job Description Director, Manufacturing Engineering – Garden City, New York About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • Bachelor’s degree in engineering, Manufacturing Engineering preferred, or other technical related discipline is required; MBA or other relevant advanced degree is preferred., • Minimum 8 years experience in a manufacturing environment, including managing salaried and hourly staffs., • Minimum 5 years using continuous improvement methodologies, LEAN, Six Sigma, etc. is preferred. SUMMARY OF POSITION The Director, Manufacturing Engineering (ME Director) is responsible for supporting business goals including product cost and quality, schedule adherence and delivery on-time to customer demand. It is a hands-on position that is responsible for ensuring the manufacturing processes, tooling, equipment support the Safety, Quality, Delivery and Productivity goals of the business. This ME Director plays an integral part in plant operations, special projects, OPEX, and is responsible for developing and maintaining motivated team and for supporting budgetary and production targets. The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. SUPERVISORY RESPONSIBILITIES The position has direct reports but must be able to work in partnership with Engineering, Quality, Supply Chain and Production in support of the departmental objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • The Manufacturing Engineering team is responsible for developing the standard processes used to manufacture heat exchangers including selection and definition of all tooling, equipment, fixtures, and anything else related to the process. The team is responsible to ensure all production processes are defined using the standard work formats and templates as well as to create any training documents required to ensure production operators can perform the work in accordance with the documented standard., • Design and develop any tooling or fixtures needed to support the production processes., • Support the Operations team in the achievement of KPI’s related to shipping volume targets, on-time delivery, past due backlog, customer lead time, efficiency, utilization, and overtime premium expense., • Support and drive continuous improvements in manufacturing metrics including quality, yields, cycle time, productivity, and cost. Promote process improvement, and LEAN manufacturing methodologies and 5S processes., • Implement and drive continuous improvement activities through implementation of change management process and best practices., • Timely and thorough implementation of engineering changes. Actively partner in the creation and review of engineering changes when needed., • Establish and monitor overall performance for product and quality standards; recommend process improvements / quality control programs. Recommend changes in work practices to improve production standards and product quality., • Ensure the ME team is properly deployed to support the daily needs of the business, new product introduction, cost reduction projects, or other duties as needed., • Oversee the Operational Excellence (cost reduction) plans for the site. Coordinate and manage the projects at a tactical level and develop the project tracking tools to report out to senior management., • Coordinate, review, and present data for the purchase of capital equipment, tooling improvements to audiences at various levels of the company., • Provide technical support and recommendations to both internal and external customer technical/quality teams regarding process improvements, non-conforming parts, defects, and repair/rework., • Author annual performance reviews and develop continuing education and advancement paths for entire department., • Provide oversight for manufacturing activities in the Reynosa Mexico facility., • Minimal travel expected. Potential travel to facility in Reynosa, Mexico in support of overall business objectives. UALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Must possess solid analytical skills in forecasting and anticipating production needs and capabilities., • Must be able to prioritize workload in a multitasking environment, short-term tactical along with longer term strategic activities., • Must be able to work independently with minimum supervision and have the ability to interact positively and motivate others, • Excellent verbal and written communication skills; fluency in Spanish is preferred., • Experience with MRP systems; preferably Oracle., • Proficient in Microsoft Office programs to include Teams, Word, Excel, and PowerPoint., • Willingness to work a flexible schedule to get the job done., • Exceptional communication skills; promoting teamwork and a positive work environment., • Experience should include build-to-order manufacturing management experience in medium volume/high-mix production environments, preferably in the military or aerospace industries., • Demonstrated history of successful change management and implementation of operational excellence improvements such as lean manufacturing, demand flow, and six sigma., • Strong ability to communicate with all levels of the organization from the production floor to the executive office; strong interpersonal, leadership, & organizational skills., • Familiarity with assembly, welding, brazing, machining, and testing processes is desired., • Demonstrated knowledge of and familiarity with a variety of lean tools and methodologies including, but not limited to:, • VSM, Standard Work, Pull Systems & Kanban, Integrated Business Planning, Daily Management, 5S/Visual, • Management, 3P, SMED, TPM, Variation Reduction and Six Sigma. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $175,000 to $200,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information.

Job Description Power-Flo Technologies’ Hi-Tech HVAC division is looking for a Regional Sales Manager to manage and oversee our HVAC wholesale vertical in NY and NJ. Responsibilities will include but shall not be limited to driving wholesale sales of HVAC products and projects, growth of sales via outside sales recruitment, development and retention of top-line manufacturers and key accounts, and key account relationship management. Additional responsibilities shall be – identifying sales opportunities, leveraging existing client relationships to sell entire product offering, develop proactive go to market strategy, and streamline quoting projects. We are a value added wholesaler selling parts, equipment, and custom designed control systems. Responsibilities include but are not limited to the following: • Manage daily operations and plan effective utilization of available resources including talent, • Direct and coordinate activities involving sales of manufactured products, control system design, services, commodities, and project sales, • Lead and manage a team of employees providing training, guidance, and support while fostering a positive and collaborative team culture, • Facilitate communication between team members and upper management, • Identify opportunities for improved efficiency and effectiveness, • Encourage innovation and process improvement within the department, • Communicate organizational goals, policies, and changes to the team, • Plan and direct staffing, training, and performance evaluations to develop and control sales and service programs, • Provide the best class service to clients and lead team with an effective go to market strategy Necessary Qualifications: • 5+ years of HVAC sales experience, • Product and vendor knowledge (or the ability to quickly learn it), • Demonstrated ability to communicate clearly and concisely in written and verbal formats, • Strong customer service orientation, • Two-year technical degree, • Must have a valid and clean driver's license to travel to vendors and customers, • Must be able to lean out Windows based and out text command-based ERP System, • Must be committed to learning our business and keep up to date on industry developments, • Must be self-motivated and sales driven individual., • Experienced being responsible for maintaining and exceeding quota’s/sales goals, • 40+ Hours a week., • Work out of New Hyde Park Office with travel to NJ once a month. Pay & Benefits: • Wage Commensurate with experience ($75,000-$100,000 annually), • Medical, dental, and vision, • PTO Program and Paid Holidays, • 401K, • EAP, • ESOP (Employee Stock Ownership Plan), • Bonus potential About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job Description Power-Flo Technologies is seeking a highly organized Warehouse Team Lead to join our team. The Warehouse Team Lead will be responsible for supporting and coordinating the daily operations of the warehouse, ensuring efficient inventory control, materials management, shipping, and transportation planning. The ideal candidate will have strong leadership skills, a keen attention to detail, and a solid understanding of warehouse management principles. Reports to: Warehouse Manager Schedule: Monday – Friday, 9:30 AM - 6:30 PM Salary Range: $19 - $24/hour We offer a benefits package including, but not limited to: • Medical, Dental, Vision Plans, • PTO Program and Paid Holidays, • 401K plan, • EAP, • Employee Stock Ownership Plan (ESOP) WAREHOUSE TEAM LEAD ESSENTIAL RESPONSIBILITIES • Support the Warehouse Manager in supervising and coordinating warehouse resources to accomplish daily goals., • Communicate with internal teams, such as operations and sales staff, regarding warehouse activities., • Develop and manage the warehouse staff to achieve steady flow of materials through the warehouse, supporting manufacturing efficiencies., • Support production activities by coordinating efficient and timely material pulling., • Manage physical inventories, both regular cycle-counts and annual physical inventory., • Plan and execute warehouse reorganization projects, to improve efficiencies of space and resource utilization., • Review freight carrier performance, both inbound and outbound, and identify cost savings opportunities., • Manage logistic issues with freight carriers, including shipment tracking and billing., • Coordinate procurement of packaging materials/supplies with Purchasing team, and work to identify cost savings opportunities., • Enforce consistent adherence to all warehouse procedures throughout the department and take corrective actions where necessary., • Maintain a clean, organized, and safe work environment., • Develop and lead projects to improve inventory control, coordinating with other departments as needed., • Monitor warehouse equipment needs, and coordinate with management on acquiring or upgrading., • Accomplish special projects and other assignments/duties as required by management and support Shop floor for additional needs., • Other duties as assigned. WAREHOUSE TEAM LEAD NECESSARY QUALIFICATIONS • Experience in a warehousing leadership role, • Must be highly knowledgeable about warehousing principles, practices, and methods, • Must have strong leadership skills, able to develop and guide effective work teams, • Must have good communication skills and actively interact with associated departments on a regular basis, • Knowledge of and experience with electrical, HVAC, and plumbing products a plus, • Valid and Clean NYS Driver's License to operate company vehicles, • Ability to manage multiple projects and deadlines, • Self-motivated, organized and creative, • Excellent written and verbal communication skills, • Team player, professional with a “can-do” attitude, • Proficiency with ERP system and in MS Office/Windows products PHYSICAL REQUIREMENTS • Ability to stand for up to 8 Hours, • Ability to lift 50 pounds and push/pull 100+ lbs, • Ability to work on elevated platforms, • Ability to climb ladders, • This position may require standing, stooping, bending, kneeling, crouching and/or reaching, • You may be exposed to dust, loud noises, and hot and cold conditions We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa currently. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS. For this and other opportunities check out

Job DescriptionAppliance Repair Technician • Training, • Company Vehicle (Long distance drive times), • Gas Card, • Tools

Job DescriptionSr. Mechatronics and Robotics Technician (SMRT) Location In this key leadership role, you'll support the maintenance and reliable operation of building systems and advanced automation in a high-volume client facility. As a Sr. Mechatronics and Robotics Technician, you'll lead a shift, guide fellow technicians and controls partners, and drive continuous improvement for materials handling equipment (MHE) and robotic systems MAKE $120K+/YR! What You'll Do: • Prioritize safety by enforcing procedures and promoting a secure work environment., • Repair, maintain, and enhance MHE and robotic systems across the facility., • Lead and audit preventive maintenance programs for consistent performance., • Troubleshoot and resolve issues with relay logic, ladder diagrams, control components, photo-eyes, motor starters, limit switches, proximity sensors, solenoids, and related devices., • Direct emergency repairs on critical assets, develop training plans, and mentor maintenance technicians., • Manage work orders in the CMMS, ensuring accurate documentation and closure., • Build strong collaborative relationships with the client and operations teams., • Handle additional duties as required to support facility reliability.What You'll Need:, • Authorized to work in the U.S. without current or future visa sponsorship., • High school diploma or GED., • 4+ years of experience with automated conveyors and controls., • Proficiency with Microsoft Office Suite (Word, Excel, PowerPoint, Outlook)., • Knowledge of MHE safety standards per OEM and industry guidelines., • Understanding of electrical/electronic principles, NEC, and industrial electronics., • Experience reading blueprints, schematics, and PLC programs., • 3+ years managing work orders in a CMMS., • Ability to use statistical tools for metrics like OEE/uptime to guide priorities., • Strong problem-solving skills for routine, preventive, emergency, and compliance tasks., • Physical capability to lift up to 50 lbs, stoop, stand, walk, climb stairs/ladders (with or without reasonable accommodation).Preferred:, • Associates or higher degree in a mechanical or electrical field., • Prior leadership or vendor management experience., • Robotic maintenance background., • CMMS expertise., • Certifications in electronics, electrical, mechanical, PLCs, robotics, or power transmission.Benefits Offered:, • Comprehensive medical, dental, and vision coverage., • Disability benefit program., • 401(k) with company matching., • Paid time off and holidays., • Company-paid life insurance., • Pet insurance., • Paid parental leave.We focus on your growth through on-the-job experience, coaching, and formal trainingequipping you to excel today and advance tomorrow. If you're ready to lead in a dynamic automation environment and own equipment reliability, apply now.

Job Description • We are hiring immediately for full-time FIELD SERVICE TECHNICIAN positions., • Location: Coffee Distributing Co. - 200 Broadway, New Hyde Park, New York 11040. Note: online applications accepted only., • Schedule: Monday - Friday; shifts are from 6:30 am to 3:00 pm., • Requirement: Must have strong technical aptitude and be comfortable repairing small appliances. Experience with light plumbing or basic electrical work is a plus. Additional Responsibilities: SUMMARY: The Field Service Technician is responsible for the installation, maintenance, and repair of various coffee and water equipment. Our ideal candidate is technically proficient, able to troubleshoot issues efficiently, and has excellent customer service and time management skills. Essential Duties and Responsibilities: • Install, maintain, and repair coffee and water equipment., • Diagnose and troubleshoot equipment malfunctions., • Advise customers on preventive maintenance and configurations which may impact product performance., • Ensure all repairs and maintenance meet quality standards., • Provide excellent customer service, including answering questions and providing information on the proper use of equipment., • Keep updated records of performed tasks and customers., • Manage and address any customer complaints or issues., • Comply with safety and health regulations. The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: About Canteen: Canteen brings break time to everyone. We combine food, service, and experience backed by industry-leading technology to help companies create a better workplace and connect their employees. Canteen’s solutions include markets, office coffee and snacks, unattended retail, and culinary. Our people are at the heart of everything we do. Their dedication, collaboration, and passion fuel our growth. Interested in joining our team? You bring the enthusiasm, customer service, and commitment; we’ll supply the opportunity and innovation. Together, we’ll continue to transform our industry. Come for the job, stay for the career. We are Canteen. Job Summary Summary: Repairs, maintains and assists in the installation of vending machines and equipment. Essential Duties and Responsibilities: • Responds to dispatch calls for machine repairs using company-owned vehicle., • Calls on existing customers to determine adequacy of service; listens to and resolves service complaints., • Visually inspects and listens to machines to determine causes of malfunctions; dismantles machines to gain access to problem area., • Inspects parts to detect wear, misalignment or other problems; removes and replaces worn or defective parts; repairs broken parts; realigns and adjusts components; tests machine operation following repair., • Reviews inventory and orders parts; ships and receives machines; maintains equipment inventory., • Prepares machines for installation at accounts; assists in installations and removals., • Sets up and operates mechanical equipment and small hand tools, such as drills, grinders and welding torches, for machine repair. Full-time and part-time positions offer the following benefits to associates: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs). Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. About Compass Group: Achieving leadership in the foodservice industry Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Applications are accepted on an ongoing basis. Canteen maintains a drug-free workplace. We will consider for employment all qualified applicants, including those with a criminal history (including relevant driving history), in a manner consistent with all applicable federal, state, and local laws, including the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance, the San Francisco Fair Chance Ordinance, and the New York Fair Chance Act. Req ID:1498598 Canteen

Job DescriptionDescription: Join Our Team as a Field Service Technician at DOC Services! Are you a skilled technician looking to advance your career with a leading company that values your hard work and expertise? DOC Services Inc. is the perfect place for you! With over 35 years of experience and a reputation for excellence, we are committed to providing reliable maintenance solutions that keep our clients’ businesses running smoothly. Why DOC Services Inc.? • Year-Round Stability: Enjoy consistent work., • Growth and Development: Continuous training and opportunities to enhance your skills and advance your career., • Comprehensive Support: Be part of a company that sets you up for success, with robust resources and a dedicated support system., • Flexible Scheduling: Achieve work-life balance with schedules designed to fit your lifestyle., • Diagnosing and repairing mechanical and electrical failures on electromechanical equipment., • Performing preventive maintenance while adhering to OSHA safety standards., • Skillfully using hand and power tools for equipment assembly, disassembly, and repair., • Promptly responding to service calls to keep our clients’ equipment operating seamlessly., • A high school diploma or GED., • 2+ years of equipment repair experience or equivalent training., • Strong mechanical and electrical skills, with the ability to read schematics., • A valid driver's license with a clean driving record., • Excellent interpersonal skills and a professional attitude., • The ability to work independently, pay close attention to detail, and remain organized., • Tools of the Trade: Company vehicle, phone, laptop, and gas card provided., • Financial Security: Competitive pay and a 401(k) plan with company match., • Health and Wellness: Comprehensive medical, dental, and vision insurance options., • Career Advancement: Continuous training and professional development opportunities. DOC is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment based on race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, disability, or any other federal, state, or local protected class. Requirements:

Job Description Service Technician Caterpillar Natural Gas Engines Salary: $40.00 – $55.00/hr, based on experience and certifications Location: Garden City, New York OUR CLIENT On behalf of our client, we are seeking an experienced Service Technician for Caterpillar engines and commercial generator systems in Garden City, NY. This is an opportunity to work at the forefront of advanced energy solutions with a focus on Caterpillar (including G3508) and Waukesha natural gas generators, heavy-duty diesel/portable engines, and alternative fuel technology. This role offers hands-on technical challenges, career growth potential, and a chance to directly advance sustainable energy infrastructure. THE IDEAL CANDIDATE * Minimum 2 years of experience working with Caterpillar engines (with emphasis on G3508 series), Waukesha NG engines, portable diesel engines, power generators, and commercial generator systems. * Strong background in troubleshooting, maintaining, and repairing natural gas and diesel generators, including cooling, lubrication, and electrical subsystems. * Ability to read and interpret electrical and mechanical schematics, diagnose/resolve faults, and execute complex repairs and precision adjustments (high-pressure gas systems experience is an asset). * Electrical expertise: maintain/troubleshoot panels, wiring, motors, and controls for safe and efficient operation. * Mechanical expertise: repair compressors, pumps, piping, valves, actuators; oversight of heat exchangers and system optimization. * Experience with CNG, RNG, or hydrogen station inspections and general maintenance highly valued. * Familiarity with documentation and compliance in regulated environments, ability to log service data and adhere to all safety standards. * Valid driver's license required; must be able to travel between sites and support an on-call rotation. * Physically capable of frequently lifting up to 50 lbs and occasionally up to 75 lbs, and comfortable with frequent walking, climbing, and outdoor work. WHAT'S IN IT FOR YOU? * Competitive, experience-based hourly pay ($40–$55/hr), with comprehensive benefits (medical, dental, vision). * Tool and uniform allowance, company-provided equipment. * Innovative, safety-focused work environment surrounded by passionate professionals. * Training in alternative fuels (CNG, RNG, hydrogen) and cutting-edge Caterpillar/Waukesha engine systems. * Opportunities for advancement and skill development as part of a leader in sustainable energy solutions. WHAT TO DO NOW If you have the required qualifications and want to energize your career working on Caterpillar and Waukesha engines for critical green-energy infrastructure in New York—apply now. Please note: Only candidates selected for an interview will be contacted due to the volume of interest. Keywords: Caterpillar G3508, Waukesha NG engines, diesel generators, CNG station, RNG, heavy equipment, generator technician, Garden City jobs, service technician, alternative fuel systems, New York energy jobs.

Job DescriptionCompany Description Metro Physical & Aquatic Therapy is a comprehensive multidisciplinary company who offers Physical, Occupational, Speech Therapy, Massage and Acupuncture services. We take great pride in inspiring our team to create an everlasting bond with our patients, our doctors, and our community. But it’s not just what we do, it’s who we are. We are driven by our mission to continually invest in our people and offer the best workplace environment possible. Job Description Metro is looking for an experienced Facilities Specialist to play an important role in our company expansion. If you're a self-starter who enjoys working in a collaborative environment, where you'll have the opportunity to make an impact on a fast-growing company, we want to hear from you! The Facilities Specialist will be responsible for performing new and ongoing maintenance of facility related duties to support the clinic operations and assist in creating a top-notch experience within all Metro PT locations. The role will encompass our LI, Westchester and New England expansion facilities. Travel is required (local and non-local as necessary). This position will be based out of our HQ in Garden City, NY, with up to 75% local travel required. Must have a reliable mode of transportation to travel between locations! Essential Functions: * Assists with maintenance and repairs of clinics. * Makes periodic tours of the interior/exterior of the sites and equipment to ensure standards are being maintained. * Follow all assigned checklists and respond to facilities support requests in a timely manner. * Identify, troubleshoot and repair minor electrical problems, issues with HVAC, mechanical equipment, lighting, appliances and other applicable items relating to clinic maintenance * Perform minor repairs to structural surfaces including walls, ceiling, and floors; including light repainting of walls * Work closely with the IT team; assisting with overall IT needs and the installation of computers. * Perform administrative tasks as needed such as procurement, vendor coordination, scheduling, etc. Qualifications • High School Diploma or General Education Development (GED) required., • Trade school or relevant certifications and/or job experience., • Minimum 2 years of Facilities experience, • Prior multi-site facilities support experience is a plus, • Strong technical abilities required; experience installing computers is strongly preferred., • Exceptional customer service skills and attention to details., • Highly organized, strong attention to detail and a natural problem solver, • Excellent communication skills, both verbal and written., • Able to work independently and as part of a team., • Proficiency in Microsoft Office software., • Must be willing to work on the occasional Saturday as needed., • Must possess a valid and clean NY driver’s license, and reliable transportation to travel between Metro locations as needed. Additional Information What We Offer! • Competitive compensation package, • 401(k) plan with company matching options, • Generous Paid Time Off, • A rich benefits package, including medical, dental, life and long-term disability insurance, • Progressive Leadership Development Programs, • New York's 529 College Savings Program, • Employee Perks: discounted rates for entertainment, travel, fitness, insurance plans, etc. through our partnership with Plum Benefits, • FSA Plans- pre tax savings plans to pay for unreimbursed medical and dental expenses, travel to & from work, • Company Events- Annual Family Field Day, Leadership Retreats, and Holiday Awards Celebration

Job DescriptionBuild the environments where safe surgeries begin Before a surgical light turns on or a sterilizer runs its first cycle, someone ensures clearances are right, utilities are in spec, and every bolt is tightened. As a Medical Equipment Installer with STERIS, that someone is you. A day in the life You arrive on site—often at a major hospital in Manhattan or a community facility on Long Island—meet with the customer, and coordinate timing with the Installation Project Manager. You confirm rough-in dimensions, utility locations, and pathway clearances through doorways, elevators, and corridors. You uncrate and assemble STERIS equipment, set or lift units into place, level and anchor, connect plumbing and electrical utilities, then test and verify operation. You capture service documentation electronically, wipe down surfaces, remove packing materials, and walk the client through the install—answering questions before you leave. Territory and travel • Primary coverage: NYC, Manhattan, most of Long Island, and Northern New Jersey as needed., • Frequent day trips using a company vehicle, plus periodic Monday–Friday trips with likely overnight stays., • Some weekend work may occur (not to exceed two weekends per month); hours flex based on customer schedules. Overtime is common but not guaranteed., • Projects may also take you to other hospital systems and states for diverse installations.What you'll do, • Partner with the Installation Project Manager to align installation dates with deliveries, site readiness, and construction timelines., • Verify site readiness: rough-in dimensions, utilities, and transport paths meet equipment specifications., • Install a range of STERIS products: uncrate, assemble, position/lift, level, connect utilities, and execute functional testing., • Complete all service and installation records electronically., • Deliver a clean handoff: remove crating/packaging, wipe equipment, and resolve final questions to ensure customer satisfaction.What you bring, • High school diploma/GED plus 5+ years recent mechanical experience in construction or HVAC installation/repair; or Associate’s in Electronics/Mechanical (or related) plus 1+ year of related mechanical experience., • Hands-on plumbing and electrical background strongly preferred., • Demonstrated troubleshooting and technical aptitude; comfortable with Windows-based software., • Strong interpersonal skills and clear verbal/written communication with customers and teammates., • Ability to manage shifting priorities and work outside standard business hours as needed; extensive travel within territory., • Valid driver’s license and a clean driving record.Why STERIS, • Join a $5B global leader dedicated to quality and safety, with ~17,000 associates worldwide and 4,000+ field-based professionals., • Grow your career across the U.S. and globally—STERIS develops talent through training and advancement opportunities.Compensation, tools, and benefits, • Competitive base pay plus a 15% differential based on total hours worked in each pay period., • Overtime opportunities; annual merit review and incentive plans., • Company vehicle with fuel and maintenance covered., • Company-issued credit card, iPhone, and laptop; all business travel expenses paid., • Uniforms and the tools you need provided., • Comprehensive medical, vision, prescription, dental, and life insurance., • 401(k) with company match; paid vacation and paid holidays., • Extensive hands-on training and development; tuition assistance., • Parental leave/adoption assistance; clear pathways for advancement.Proficiencies that set you apart, • Commercial plumbing and pipefitting, • Reading electrical schematics and blueprints, • Machine building/assembly, • OSHA 10-Hour certification, • Excellent communication with customers and project teams