Quality control engineer jobs in Hicksville, New YorkCreate job alerts

The Technical Support Engineer provides The Technical Support Engineer provides advanced technical and product support to customers, ensuring timely resolution of complex product and application issues. This role focuses on troubleshooting, issue investigation, and customer communication, working closely with Field Service, Engineering, and Product teams. The Technical Support Engineer plays a key role in maintaining high customer satisfaction, improving response times, and providing critical product feedback to support continuous improvement. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $90,000-$125,000 annually and offers a competitive benefits package. #LI-KR Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Provide advanced technical and product support to customers via remote tools, phone, email, and onsite support as needed, • Troubleshoot and diagnose complex hardware, firmware, and application issues to minimize customer downtime, • Triage incoming support cases, prioritize issues, and ensure timely resolution or escalation, • Serve as a technical liaison between customers, Engineering, R&D, Product Management, and Field Service teams, • Support engineering investigations by reproducing issues, collecting data, and validating corrective actions, • Coordinate and manage RMAs, including failure analysis and customer communication, • Facilitate efficient startup and commissioning of new installations, including remote commissioning support, • Review and create technical documentation such as troubleshooting guides, FAQs, application notes, and procedures, • Provide structured feedback on product performance, defects, and enhancement opportunities, • Train customer personnel on equipment operation, maintenance, and safe work practices, • Participate in support case reviews and contribute to process and product improvement initiatives Skills / Qualifications • B.S. in Electrical Engineering or an Associate Degree in Electrical/Electronic Engineering., • Minimum 3 years of experience in related technical or engineering roles., • Working knowledge of industry communication protocols such as Modbus, IEC 61850, DNP, and BACnet., • Excellent customer service experience in related businesses and customers, • Experience with troubleshooting product and application issues, • Understanding power systems, metering applications, industry standards, and electrical equipment., • Excellent analytical, diagnostic, and troubleshooting abilities., • Strong verbal and written communication skills, with the ability to explain technical issues to nontechnical users. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

The Sustaining Engineer is responsible for leading and managing the design, development, and implementation of electronic and embedded systems. This role involves utilizing extensive expertise and leadership skills, driving innovation, ensuring compliance with industry standards, and providing mentorship to junior team members, contributing to the success and advancement of complex engineering projects within Hubbell. The Sustaining Engineer may also review vendor capability to support product development. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $130,000 - $140,000 annually and offers a competitive benefits package. #LI-KR1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Participating in the development of multiple products simultaneously. Taking on a lead role for selected development projects, managing the NPD process from design definition through design capture and verification to the hand-off to production., • Leading and participating in project reviews and in requirement gathering meetings with sales/marketing and systems engineering groups., • Being responsible for design flow from architecture through prototype testing and production documentation. This includes circuit design, component selection and evaluation, hardware verification and validation of new products., • Performing final design reviews on all circuits and board designs, including mechanical aspects, needed to be released for prototyping and for production., • Guiding creation of hardware bring-up and production test procedures and of plans to test/validate new designs. Assisting with the design verification and validation to ensure that the completed design meets the requirements., • Performing product sustaining activities for addressing hardware related field issues as needed. Bachelor of Science in Electrical or Computer Engineering, Computer Science, or equivalent degree (required) Proficiency with a proven track record in working with designs utilizing microprocessors, microcontrollers, digital signal processors, field-programmable gate arrays, high-speed A/D-D/A conversion, and power conversion (required) 6-10 years of embedded hardware design experience on industrial products Proficiency in CAD software and other relevant tools for electrical design, analysis, and simulation (required) Experience with test equipment and measurement methodologies for electrical systems Understanding design verification/validation and regulatory compliance testing (UL, CSA, FCC). Experience with C/C++ and Python preferred. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

The Manufacturing Engineer must have the ability to analyze problems and processes and offer solutions or work with senior engineers to implement solutions. Experience working with electronics, computers, automotive or robotics or similar technology field required. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000 - $120,000 annually and offers a competitive benefits package. #LI-KR1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Assists in planning and designing processes for an electronics manufacturing facility ., • Maximizes efficiency by analyzing layout of equipment, workflow, assembly methods, and work force utilization in an electronic environment., • Daily tasks will involve working hand in hand with production in an Electronic Metering Production Department, • Determines the parts, equipment, and tools needed to achieve manufacturing goals according to product specifications., • Generates, reviews and updates work instructions and procedures as necessary to improve cycle times, cost and quality., • Works on projects/matters of limited complexity in a support role with other departments to assist in cost reduction and cycle time improvement., • Assists engineering with Prototype builds and creates all necessary documentation to transition product to production., • Assist production with ERP system (Netsuite/SAP) as necessary to ensure inventory and work orders are properly processed., • Bachelor's degree in manufacturing engineering/Mechanical Engineering or similar technical area., • 3-5 years' Experience in an electronics manufacturing environment where electrical testing of Printed Circuit boards and/or finished goods is performed, • Lean Six Sigma/5s Tools a Plus., • Experience with wiring, cable assemblies, PCB's, soldering and mechanical assembly of electronics strongly recommended., • Netsuite experience a plus, or ability to learn new software to assist production Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Data Center Power & Control Team.The Manufacturing Engineer develops, implements, and maintains manufacturing processes to support existing and new products.The role supports team-based process improvement efforts to ensure manufacturing processes meet requirements for capability, safety, quality, c

Job Description The Process Engineer is responsible for developing, maintaining, and improving configuration processes and operational work instructions used in the provisioning and deployment of IoT devices. This role creates and manages device configuration workbooks, supports manufacturing and operations teams, and ensures quality standards are consistently met through process adherence, First Article Inspections (FAIs), audits, and continuous improvement initiatives. This position works cross-functionally with Operations, Engineering, Quality, Supply Chain, and Customer Support teams to ensure accurate, scalable, and compliant device configuration processes. CORE ACCOUNTABILITIES Process Engineering & Device Configuration • Develop, maintain, and optimize configuration workbooks, process documentation, and work instructions for IoT device provisioning and deployment • Translate technical product requirements into clear operational procedures and configuration workflows, • Support configuration activities including firmware loading, SIM provisioning, network setup, labeling, serialization, and customer-specific programming requirements • Collaborate with Engineering and Product teams to implement new product introductions (NPI) and process changes • Identify opportunities to improve configuration efficiency, reduce errors, and streamline workflows, • Assist in troubleshooting device configuration issues and support root cause analysis activities, • Maintain process version control and ensure documentation accuracy across manufacturing and operations environments Quality & Compliance • Ensure configuration workbooks and operational procedures are consistently followed by production and operations teams • Conduct process audits and monitor adherence to established quality standards and work instructions, • Support First Article Inspections (FAIs) for new products, configuration changes, or process updates, • Assist with internal, customer, and external audits by preparing documentation and supporting corrective actions, • Participate in CAPA, nonconformance investigations, and continuous improvement initiatives, • Monitor quality metrics and support implementation of corrective and preventive actions, • Help maintain compliance with ISO, customer, and regulatory requirements where applicable Cross-Functional Collaboration • Partner with Manufacturing, Supply Chain, Quality, and Technical Support teams to ensure successful device deployment and operational readiness • Provide training and guidance on configuration processes and documentation updates, • Support scaling of configuration operations for new customers, products, and global deployments QUALIFICATIONS Required Qualifications -Bachelor’s degree in Engineering, Manufacturing, Industrial Technology, Supply Chain, or related field preferred -2–5 years of experience in process engineering, manufacturing engineering, quality engineering, or technical operations -Experience working with IoT devices, electronics manufacturing, or technical configuration environments preferred -Knowledge of process documentation, work instructions, and manufacturing workflows -Familiarity with quality systems, audits, and First Article Inspection (FAI) processes -Strong analytical, troubleshooting, and organizational skills -Proficiency with Microsoft Excel and process documentation tools -Experience with ERP, MES, or quality management systems is a plus Preferred Qualifications -Experience supporting ISO 9001 or similar quality management systems -Knowledge of Lean Manufacturing and continuous improvement methodologies -Familiarity with cellular connectivity, firmware management, or embedded devices -Experience in high-mix, low-volume manufacturing or device provisioning environments Key Skills -Process improvement -Attention to detail -Technical documentation -Quality assurance -Root cause analysis -Cross-functional collaboration -Problem-solving -Time management OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. WORK ENVIRONMENT -Manufacturing, operations, or technical production environment -Combination of desk-based process documentation and hands-on operational support -Collaboration with internal teams, suppliers, and external auditors as needed WORKING CONDITIONS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to remain stationary; move; lift, push, pull and/or move up to 15 pounds. The employee must regularly sit; use hands to finger, handle, or feel; reach with hands and arms; communicate. Specific vision abilities required by this job include close vision. VISION To be the trusted global leader in IoT Connectivity Solutions for over 100,000,000+ connected devices, enabling a smarter, more connected world for all. MISSION To empower our customers to deliver transformative solutions that deliver impactful outcomes to the communities and customers they serve. KORE VALUES Customer Obsession We earn trust through deep understanding and relentless commitment. We earn the trust of our customers and aim to delight them through our solutions – we want to be loved by our customers. Be the Spark We lead with energy, creativity, and urgency. We don't wait for change – we ignite it. We listen, engage, and encourage others to participate. Own the Outcome We take accountability seriously – delivering on our promises to customers, teammates, and ourselves. We finish what we start. We think like owners and we’re frugal where it makes sense. Grit & Positivity We face challenges head-on – with resilience, optimism, and determination. We look at these situations as an opportunity to create a positive outcome. When we make a commitment, we deliver. We challenge those in a respectful way that do not meet their commitments. Challenge. Debate. But Be Human. We speak up, question assumptions, and challenge ideas – not people. We aim for the best outcomes through respectful, direct, and open dialogue, keeping in mind we’re all on the same team. KORE Wireless Group, Inc., is an Equal Opportunity Employer and Prohibits Discrimination and Harassment of any kind. KORE is committed to the principle of equal employment opportunity for all employees and to providing employees with a work environment free of discrimination and harassment. All employment decisions at KORE are based on business needs, job requirements and individual qualifications, without regard to race, color, religion, or belief, national, social, or ethnic origin, sex (including pregnancy), age physical, mental or sensory disability, HIV Status, sexual orientation, gender identify and/or expression, marital, civil union, or domestic partnership status, past or present military service, family medical history or genetic information, family or parental status, or any other status protected by the laws or regulations in the locations where we operate. KORE will not tolerate discrimination or harassment based on any of these characteristics.

Job DescriptionDescription This person will be responsible for overseeing the procurement of over 150 custom spun metal components we’ve designed over the years. We work closely with our trusted metal spinning and wood turning partners, and have sourced a network of US-based high-quality suppliers who are keeping their time-honored craft alive here in America! The Procurement Engineer will work closely with the Systems and Design Engineers to ensure part requirements are clearly and successfully communicated to our partners. Data for recommended order quantities and historical usage is all available on the company’s meticulously configured DDMRP (Demand Driven Materials Requirements Planning) system – Intiflow and Netsuite ERP. On top of analyzing data, sending emails and phone calls to partners, quoting parts, and submitting purchase orders – yxou will be a central point of contact for our design, engineering, scheduling, production, and receiving departments for all things related to the parts under your control. Key ResponsibilitiesYour responsibilities include: • Quote and Purchase parts – maintain all required inventory at “preferred stock levels”, • Maintain and improve vendor relationships, • Pursue new vendors, • Collaborate with Design and Engineering to understand part requirements, • Collaborate with Receiving department to assist with the quality control inspection process, • Collaborate with Scheduling and Production to communicate potential delivery delays or quality issues Ideal Candidate Our ideal candidate must: • Have knowledge about manufacturing practices relating to Metal Spinning and or Wood Turning, • Be excited about the entire production process, actively observing ways in which our systems can be improved to reduce error and increase efficiency, • Be a strong collaborator and organized multitasker, • Have great attention to detail while inspecting parts for defects as they are pulled for production, and able to comprehend what kinds of defects are not acceptable to the final product, • Have the ability to dive in and understand the construction of our fixtures, • Be comfortable in a role that flexes with our growing company, • Someone with attention to detail who can learn the large catalog of parts we stock, • Strong technical skills to navigate our software-based workflows Ideal CandidateOur ideal candidate must: • Have knowledge about manufacturing practices relating to Metal Spinning and or Wood Turning, • Be excited about the entire production process, actively observing ways in which our systems can be improved to reduce error and increase efficiency, • Be a strong collaborator and organized multitasker, • Have great attention to detail while inspecting parts for defects as they are pulled for production, and able to comprehend what kinds of defects are not acceptable to the final product, • Have the ability to dive in and understand the construction of our fixtures, • Be comfortable in a role that flexes with our growing company, • Someone with attention to detail who can learn the large catalog of parts we stock, • Strong technical skills to navigate our software-based workflows

Job Description Express Employment Professionals-Farmingdale, NY is seeking an experienced Senior Control Systems Engineer to lead and manage our in‑house Control Panel Shop. This role requires strong technical expertise in industrial control panel design and fabrication, as well as the leadership skills needed to guide a team of technicians and collaborate with sales staff to support business growth. Key Responsibilities • Manage daily operations within the Control Panel Shop, ensuring efficient and high‑quality panel fabrication., • Design and draft small industrial control systems using AutoCAD Electrical, including schematics, panel layouts, bills of materials, and special details., • Select, specify, and procure all components required for control panel builds., • Partner with Sales to develop opportunities and drive panel shop revenue., • Program and configure Programmable Logic Controllers (PLCs), HMI interfaces, and Variable Frequency Drives (VFDs) for various control applications., • Conduct factory testing of controls and finished panels to ensure compliance with applicable standards., • Ensure all control panels meet UL 508A requirements; maintain strong working knowledge of UL compliance standards., • Provide technical support to customers—primarily over the phone, with occasional on‑site service when necessary., • Supervise, mentor, and support Panel Shop Technicians, fostering a collaborative and positive team environment., • Use Microsoft Office Suite (Word, Excel) for documentation and reporting., • Utilize SAP for sales, procurement, production orders, and inventory management (training provided if needed).Qualifications, • Bachelor’s degree in Engineering or equivalent design and industrial control experience., • Strong proficiency in AutoCAD Electrical for control system design., • Hands‑on experience designing, assembling, and testing industrial control panels., • Demonstrated ability to program PLCs and HMIs; experience with VFD setup and testing., • Familiarity with UL 508A standards and certified panel shop processes., • Excellent communication and leadership skills; ability to guide technicians and interact effectively with cross‑functional teams., • Proficiency with Microsoft Word and Excel., • Experience with SAP is helpful but not required (training available). #2127ST

Job Description The Supplier Quality Engineer will be responsible for executing and expanding on key initiatives inside of the supplier quality organization. The Supplier Quality Engineer will be responsible for executing various supplier quality engineering related activities such as Compliance, Process, and Product Audits, MRB, FAI Witnessing, Review and Sign off, Problem Solving, Corrective and Preventive Actions, Supplier Performance Reporting and other Quality Improvement Activities. Job Responsibilities: • Assess suppliers manufacturing and quality processes through performing supplier audits following various standards depending on the type of audit. Audits may include but not limited to the following: AS9100 Compliance Audits, special processes, APQP audits, process, and product audits., • Lead and/or support MRB activities to achieve optimal disposition of non-conforming material and ensure that adequate corrective actions are implemented., • Perform on-site supplier visits for root cause analysis and verification of corrective actions of supplier quality issues, • Promote and facilitate the use of customer preferred techniques for continuous improvement such as Lean, Six-Sigma, Poka-Yoke, and Process Failure Mode and Effects Analysis (PFMEA), • Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers., • Support suppliers in the evaluation of existing manufacturing or business processes, identification of opportunities for improvement, and development of solutions to optimize supplier performance using various problem-solving techniques., • Provide technical guidance and assistance to suppliers to solve process and product quality issues and improve internal and outgoing quality performance., • Develop and maintain detailed and accurate reporting of supplier performance and quality improvement progress. Report weekly and monthly on supplier progress to meet customer expectations., • Undertake special projects as required, • Develop and maintain strong relationships with internal and external stakeholders to ensure optimal performance., • Communicate efficiently and effectively with all stakeholders to ensure timely and effective responsiveness to abnormalities. Required Skills • 8+ years of hands-on experience as a Quality Engineer in an Aerospace Manufacturing Environment, • 5-8 years of FAI experience with AS9102 (FAI) standards at a quality engineering level., • Strong understanding of various Engineering Processes, Standard Drawings Conventions, Interpreting Drawing, Specifications, and GD&T, • 5-8 years' experience hands-on experience with the ISO9001 and AS9100 Quality Management Systems Processes, especially in Production, Quality, and logistics, • Knowledge of, (or hands-on experience preferred), with FAA, EAR, and ITAR standards and regulations, • Experience leading customer audits, • Strong verbal, written and communication skills, • Project management, time management, problem solving and organization, • Ability to work as an effective team member and lead other team members Additional Desired Skills: • Prior practical experience and implementation of Quality Engineering tools and systems such as: DOE, FMEA, SPC, RCCA, APQP, PPAP, controls plans, material control, process control, systems performance, product evaluation, MSA, metrology, automated measurement, and software is preferred. General Requirements • Ability to pass background and drug screen, • Valid drivers license and auto insurance required., • Vision exam is required prior to hire. Requirements are as follows:, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist or other professionally recognized person. The following requirements shall apply., • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates, • US Citizenship Required: TRIGO ADR AMERICAS can restrict hiring to US Citizens when government contracts require us to do so. 8 U.S.C. § 1324b(a)(2)(C). Additional Qualifications (Preferred): • Bachelor's degree from an accredited college in a technical discipline, (i.e., Industrial Engineering, Mechanical Engineering, Quality Management, etc.), • ASQ or equivalent professional certifications such as CQE, CQT, CQA, CMQ, CSQP …etc., • Six Sigma Green Belt or Black Belt Certification. WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • Requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employment Pay Range $70,000-105,000 Annually. Please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . Powered by JazzHR bG0xIH5Pqj

Job Description The Quality Control Engineer owns incoming inspection and supplier quality for all parts, components, and sub-assemblies entering Allied Maker's production process. Working across materials including hand-blown glass, machined and spun metals, alabaster, and wood, this role defines quality standards, builds inspection systems, and partners with vendors to resolve issues at the root cause. This role is critical to maintaining the craft, consistency, and reliability expected from Allied Maker products. Key Responsibilities Incoming Inspection Across Materials • Develop inspection plans, sampling strategies, and acceptance standards for each material type, • Inspect glass for dimensional accuracy, clarity, inclusions, and color consistency, • Inspect machined/spun metals for dimensional conformance, wall thickness, and surface finish, • Evaluate alabaster for veining, translucency, and structural integrity, • Verify wood components for species, moisture content, joinery, and finish quality Supplier Quality & Vendor Development • Act as primary quality contact for vendors, • Lead root-cause analysis (8D, 5-Why, Fishbone) and corrective actions, • Qualify new suppliers and parts via First Article Inspection (FAI), • Track supplier performance (defects, responsiveness, quality consistency), • Conduct supplier audits and site visits Nonconformance & Continuous Improvement • Disposition nonconforming material (rework, RTV, scrap, use-as-is), • Lead cross-functional MRB decisions, • Analyze defect trends and cost of poor quality, • Drive improvements to reduce scrap, rework, and disruptions, • Partner with Assembly & Manufacturing Engineering on upstream improvements Standards & Documentation • Build and maintain inspection standards and boundary samples, • Create clear, repeatable inspection work instructions, • Maintain calibration of measurement tools and traceable records, • Ensure documentation is properly recorded in NetSuite and internal systems, • Support UL compliance by validating incoming componentsRequired Qualifications, • Bachelor's degree in Mechanical, Industrial, Materials, or Manufacturing Engineering (or equivalent experience), • 3–5 years of quality engineering experience in manufacturing or custom/luxury goods, • Strong ability to read engineering drawings and GD&T (ASME Y14.5), • Proficiency with precision measurement tools (calipers, micrometers, gauges, etc.), • Experience leading root-cause investigations and supplier corrective actions, • Ability to define and standardize subjective quality (visual / craftsmanship), • Strong communication skills with internal teams and external vendorsPreferred Qualifications, • Experience in lighting, luxury goods, architectural hardware, or custom furniture, • Familiarity with UL 1598 / UL 8750 standards, • ASQ certification (CQE, CQA) or Lean / Six Sigma, • Experience with natural materials (stone, glass, wood, alabaster), • Experience with NetSuite or similar systemsCompensation & Benefits, • Salary: $75,000 – $95,000 (based on experience), • Discretionary performance bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • PTO, paid holidays, parental leave, • Employer-paid life and disability insurance, • Safety shoe & eyewear allowance, • Employee product discountWork Environment & Physical Requirements, • On-site in Glen Cove workshop, • Split between the inspection area, production floor, and desk work, • Exposure to shop environment (dust, finishes, moving equipment), • PPE required in designated areas, • Must be able to stand/walk for extended periods, • Lift up to 35 lbs and handle fragile materials, • Occasional travel to vendorsAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$75,000—$95,000 USD

Job Description Why Epicured? Epicured is on a mission to combat and prevent chronic disease, translating scientific research into high-quality food products and healthcare services nationwide. Our evidence-based approach brings together the best of the clinical, culinary, and technology worlds to help people eat better, feel better, and live better one meal at a time. By joining Epicured’s Technology team, you’ll help power the data infrastructure that supports Medicaid programs, clinical services, life sciences initiatives, and direct-to-consumer operations — enabling better decisions, better outcomes, and scalable growth. Role Overview Epicured is seeking a Data Engineer I to support data ingestion, reporting, and analytics across multiple business lines. Reporting to the SVP of Software Engineering, this role will focus on building and maintaining reliable reporting pipelines, supporting business requests, and managing data from a growing ecosystem of healthcare, operational, and e-commerce systems. This position is ideal for a self-starter with strong SQL skills who is comfortable working with evolving requirements, healthcare-adjacent data, and modern data platforms such as Microsoft Fabric and Power BI. Key Responsibilities Build, maintain, and support reports across all Epicured business lines using Power BI, exports, and Microsoft Fabric. Ingest and integrate new data sources, including SQL Server, operational systems, and external data exchanges. Support reporting and analytics requests across Clinical & Life Sciences, Section 1115 Medicaid Waiver programs, Health Information Exchanges (e.g., Healthix), and Self-Pay e-commerce operations. Handle HIPAA-sensitive data, ensuring proper governance, access control, and compliance standards are maintained. Manage Shopify and other e-commerce data requests for Epicured’s Self-Pay division. Keep reporting environments organized, documented, and operational while prioritizing incoming requests. Operate and help scale Epicured’s Microsoft Fabric environment, contributing to platform strategy and best practices. Partner with stakeholders to clarify ambiguous requirements and translate business questions into data solutions. Qualifications 3+ years of experience in data engineering, analytics, or business intelligence roles. Strong SQL skills with experience working in relational databases. Experience with Azure, Microsoft Fabric, Power BI, or similar modern data platforms. Strong proficiency in Excel / Google Sheets. Ability to work independently and manage multiple priorities in a fast-growing environment. Experience working with healthcare or HIPAA-adjacent data, including exposure to health information exchanges. Familiarity with ETL / ELT pipelines and data modeling best practices. Experience integrating operational, financial, logistics, and clinical datasets. Preferred Qualifications Experience with C#. Python experience is a plus. Healthcare or life sciences background. Experience supporting analytics for Medicaid, payer, or regulated environments. Compensation & Benefits Salary Range: $115,000–$130,000 annually, commensurate with experience Benefits include: 401(k) Health, Dental, and Vision insurance Unlimited Paid Time Off (PTO) Opportunity to grow with Epicured’s expanding data and technology organization Equal Employment Opportunity Epicured is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of age, race, creed, color, national origin, religion, gender, sexual orientation, gender identity or expression, disability, veteran status, or any other protected status under federal, state, or local law.

Job Description The Assembly Engineer is dedicated to the Assembly department. This role designs and optimizes how Allied Maker fixtures are put together, ensures every assembler is trained to the right method, documents every meaningful change, and holds the line on UL compliance in both assembly and QC. The Assembly Engineer is the person who walks the bench every day, improves the work, and makes craft and consistency compatible at scale. Key Responsibilities Assembly Methods & Optimization • Study and optimize assembly methods across the fixture portfolio: sequence of operations, fixturing, tools, takt, and ergonomics., • Design and build bench fixtures, jigs, and tooling that make quality easier and throughput higher., • Drive continuous-improvement initiatives (Lean/Kaizen) to reduce cycle time, rework, and ergonomic risk without losing the hand-crafted feel. Documentation & Change Control • Own the library of assembly work instructions (clear, illustrated, and current) for every fixture., • Drive disciplined change control so that improvements and corrections are documented and rolled out cleanly. Training & Capability • Build and maintain a structured training program for assemblers, including onboarding, cross-training, and certification for critical operations., • Coach assemblers on new methods and verify competency when standards change., • Support new-product introductions with pilot builds and first-article training. UL Compliance in Assembly & QC • Maintain compliance with applicable UL standards (e.g., UL 1598, UL 8750) in assembly operations and in final QC inspection., • Serve as the primary internal point of contact for UL files, construction details, and field evaluations when required., • Partner with the Quality Control Engineer to ensure final inspection reliably catches anything that would compromise UL listing or customer quality.Required Qualifications, • Bachelor's degree in Mechanical, Industrial, or Manufacturing Engineering, or equivalent hands-on experience., • 3–5 years of manufacturing or assembly engineering experience in a discrete-manufacturing environment., • Proven experience authoring work instructions, building fixtures, and running structured training., • Working knowledge of UL standards for lighting (UL 1598 / UL 8750) or comparable safety-listed products., • Strong Lean/CI toolkit (5S, standard work, value-stream thinking, 5-Why/8D)., • A people-first posture: the ability to teach, coach, and earn trust with experienced assemblers.Preferred Qualifications, • Direct experience with UL lighting compliance, including maintenance of UL files., • CAD skills (Fusion or similar) for fixture design., • Prior work in lighting, luxury goods, or custom furniture manufacturing., • Lean / Six Sigma certification.Compensation & Benefits, • Base salary range: $85,000 – $110,000 annually, commensurate with experience., • Discretionary annual performance bonus., • Comprehensive medical, dental, and vision insurance., • 401(k) retirement plan with company match., • Paid time off, paid holidays, and paid parental leave., • Employer-paid life and disability insurance; employee assistance program., • Safety shoes and prescription safety eyewear allowance for shop-facing roles., • Employee discount on Allied Maker products.Work Environment & Physical Requirements, • On-site at the Glen Cove, NY workshop; significant daily time on the assembly floor with additional time at a desk for documentation and design., • Active shop-floor environment; safety glasses and closed-toe footwear required in designated areas., • Requires standing and walking for extended periods and occasional lifting up to 40 lbs when handling fixtures or tooling.About Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$85,000—$110,000 USD

Job Description Machine Maintenance Engineer Manager - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Facilities & Maintenance Engineer Manager will ensure that safety comes first in all efforts while directly supporting the needs of Production. This position will oversee the repairs, installations, and upkeep of facilities, equipment, and offices. This is a hands-on position where detailed knowledge of equipment and facilities is required. Their main duties include designing maintenance procedures, tracking budgets and expenses and performing inspections to find problems and make repairs. The position requires knowledge of manufacturing machines (CNC, Vacuum Braze Ovens, etc.) for installation, preventative maintenance, repairs, and upkeep. Candidates with these skills will be considered. SUPERVISORY RESPONSIBILITIES • Supervise employees of the maintenance department. Duties and Responsibilities: • Maintain a safe work environment while meeting the needs of production., • Ability to work independently or as a part of a team., • Perform routine work throughout the production floor., • Monitor, repair, and cite problems with process and production equipment., • Coordinate with various contractors to obtain the necessary repair information, required parts, and procedures to complete various projects and tasks., • Designing maintenance procedures, tracking budgets and expenses, and performing inspections to find problems and make repairs., • Train and supervise employees of the maintenance department., • Responsible for machine and facility maintenance., • Facilitates and assists Facility property insurance company by scheduling and participating in regular facility audits and follows up to address and implement corrective actions when deemed appropriate., • Negotiate contracts with outside vendors for execution of maintenance work., • Ensure operational efficiency of electrical equipment and mechanical systems through timely inspection and repair., • Ensure that company premises and facilities are kept in clean and hygienic condition., • Perform other duties and assignments as required. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Machine & and Equipment Repair, • Ability to maintain, troubleshoot, disassemble, and repair production equipment in a safe manner while minimizing downtime., • Execute machine repairs, alignments, lubrication, coolant changes, etc., • Demonstrate a willingness to learn various systems throughout the multiple trades., • Electrical, HVAC, & Plumbing:, • Basic understanding of electrical systems, including DC and AC voltage ranging from 24V to 480V., • Be able to read, interpret, and modify electrical prints and schematics., • Experience in ladder logic, PLC’s, VFD’s, instrumentation and control devices., • Familiarity with the operation of gas and oil heating systems., • Familiarity with the general operation of air handlers, condensers, and evaporators EDUCATION AND/OR EXPERIENCE • Bachelor’s degree required., • Minimum of five to ten years of experience and/or training., • Background in general maintenance of manufacturing machines, • General knowledge of process equipment (i.e. automated systems, chillers, air compressors, hydraulics, pneumatics, etc.), • Demonstrate proficiency in the safe use of an array of hand and power tools., • Experience with MS Office is preferred. SAFETY • Support a safety culture on the production floor., • Observance of guidelines of the safe use, handling, and disposal of various chemicals used., • Knowledge of safety topics (i.e. Lockout Tagout, Arc Flash, Machine Guarding, Hazcom, DOT, RCRA, Material Handling, etc.) LEADERSHIP • The individual must be a problem solver., • Sound analytic skills and decision-making capabilities, • Strong results orientation and execution capability; Excellent strategic and tactical thinking, • Proven ability to effectively manage multiple priorities in a fast-paced environment and consistently meet deadlines and achieve desired results., • Demonstrated ability to lead, motivate and coach people in varying disciplines to achieve performance goals; Solid team building skills., • Excellent written and verbal communication skills; able to communicate as effectively on the shop floor as in the executive suite. PHYSICAL DEMANDS • Ability to lift 50lbs., • This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing throughout the day., • Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $120,000 to $140,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job Description The Supplier Quality Engineer will be responsible for executing and expanding on key initiatives inside of the supplier quality organization. The Supplier Quality Engineer will be responsible for executing various supplier quality engineering related activities such as Compliance, Process, and Product Audits, MRB, FAI Witnessing, Review and Sign off, Problem Solving, Corrective and Preventive Actions, Supplier Performance Reporting and other Quality Improvement Activities. Job Responsibilities: • Assess suppliers manufacturing and quality processes through performing supplier audits following various standards depending on the type of audit. Audits may include but not limited to the following: AS9100 Compliance Audits, special processes, APQP audits, process, and product audits., • Lead and/or support MRB activities to achieve optimal disposition of non-conforming material and ensure that adequate corrective actions are implemented., • Perform on-site supplier visits for root cause analysis and verification of corrective actions of supplier quality issues, • Promote and facilitate the use of customer preferred techniques for continuous improvement such as Lean, Six-Sigma, Poka-Yoke, and Process Failure Mode and Effects Analysis (PFMEA), • Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers., • Support suppliers in the evaluation of existing manufacturing or business processes, identification of opportunities for improvement, and development of solutions to optimize supplier performance using various problem-solving techniques., • Provide technical guidance and assistance to suppliers to solve process and product quality issues and improve internal and outgoing quality performance., • Develop and maintain detailed and accurate reporting of supplier performance and quality improvement progress. Report weekly and monthly on supplier progress to meet customer expectations., • Undertake special projects as required, • Develop and maintain strong relationships with internal and external stakeholders to ensure optimal performance., • Communicate efficiently and effectively with all stakeholders to ensure timely and effective responsiveness to abnormalities. Required Skill: • 8+ years of hands-on experience as a Quality Engineer in an Aerospace Manufacturing Environment, • 5-8 years of FAI experience with AS9102 (FAI) standards at a quality engineering level., • Strong understanding of various Engineering Processes, Standard Drawings Conventions, Interpreting Drawing, Specifications, and GD&T, • 5-8 years' experience hands-on experience with the ISO9100 and AS9100 Quality Management Systems Processes, especially in Production, Quality, and logistics, • Knowledge of, (or hands-on experience preferred), with FAA, EAR, and ITAR standards and regulations, • Experience leading customer audits, • Strong verbal, written and communication skills, • Project management, time management, problem solving and organization, • Ability to work as an effective team member and lead other team members Additional Desired Skills: • Prior practical experience and implementation of Quality Engineering tools and systems such as: DOE, FMEA, SPC, RCCA, APQP, PPAP, controls plans, material control, process control, systems performance, product evaluation, MSA, metrology, automated measurement, and software is preferred. General Requirements: • Ability to pass background and drug screen, • Valid driver's license and auto insurance required., • Vision exam is required prior to hire. Requirements are as follows:, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist or other professionally recognized person. The following requirements shall apply., • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates, • US Citizenship Required: TRIGO ADR AMERICAS can restrict hiring to US Citizens when government contracts require us to do so. 8 U.S.C. § 1324b(a)(2)(C). Additional Qualifications: • Bachelor’s degree in Statistics, Mathematics, Computer Science, or a related field., • 4+ years of Microsoft Office products and applications experience, • Proven expertise in SQL, Tableau and Python, • Proven experience pulling and analyzing data for root cause analysis and drive process improvement initiatives., • Engineering/other technical positions: and a minimum of 2 years of prior relevant experience, • 4+ years of Expertise in SQL, Tableau and Python, • Proven experience as a Data Analyst or Quality Engineer, with a focus on data analysis and quality improvement WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • Federal rate mileage reimbursement (.67/mile 2024) when driving personal vehicles on company business, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Per diem reimbursements for meals and incidentals, • Overnight trips - Up to $75, • Leaving home after 4 pm $40, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employment Pay Range $70,000-$100,000, please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. Company DescriptionTRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Thank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications. TRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans. NOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,TRIGO Aerospace, Defense and Rail (ADR) AMERICAS’ team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results, providing a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain.\r\n\r\nThank you for visiting our Job Board. Please review our open positions and apply to the positions that match your qualifications.\r\n\r\nTRIGO ADR Americas, LLC is an Equal Opportunity Employer, including disabled and veterans.\r\n\r\nNOTICE OF AFFIRMATIVE ACTION PLAN FOR INDIVIDUALS WITH DISABILITIES,

Job DescriptionQuality Management Systems Supervisor Job Summary The Quality Management Systems Supervisor will oversee the development, implementation, and maintenance of the organization’s Quality Management System (QMS) to ensure compliance with industry regulations and standards (ISO 9001, ISO 13485, AS9100). Reporting to the Director of Quality Affairs, this individual will drive continuous improvement, support in leading in internal/external audits, manage CAPA processes, and provide cross-functional training to enhance quality awareness. Key Responsibilities • Manage the QMS structure, ensuring all policies, procedures, and Work Instructions (SOPs) are compliant with regulatory requirements and align with company strategic goals., • With guidance from the Quality Affairs Director, lead both internal and external audits (customer, registrar, regulatory), coordinate audit finding responses, and verify the effectiveness of corrective actions., • Lead root cause analysis (RCA) for non-conformances, customer complaints, and deviations, implementing effective Corrective and Preventive Actions (CAPA)., • Drive continuous improvement initiatives using lean methodologies, SPC (Statistical Process Control), and data analysis to enhance operational efficiency., • Manage the electronic Quality Management Systems (eQMS) and ensure Document Control processes are current, accurate, and compliant., • Confirms alignment of all Quality programs within the organization., • Monitor and ensure the organization’s commitment to quality meets or exceeds customer requirements and the relevant regulatory standards., • Develop, trend, and report key QMS performance metrics (KPIs) to senior management and provide solutions to guide data-driven decision-making., • Develop training materials and educate staff on QMS procedures, GMP (Good Manufacturing Practices), or regulatory compliance to cultivate a culture of quality., • Consistently review SOP and other services to improve quality and contain costs. Required Qualifications • Minimum of 5 years of experience in a leading role in Quality Management Systems or Quality Assurance in the medical device industry required (spine or neuro device companies a plus)., • Bachelor’s degree in Engineering, Life Sciences, Biomedical Engineering, Quality Management, or a related field. Master’s degree will be considered for 1 year work experience in related QMS field in medical device industry (preferably spine or neuro)., • Strong knowledge of ISO 9001, ISO 13485, or AS9100:2016 standards., • Leadership ability in root cause analysis tools, Failure Mode and Effects Analysis (FMEA), Statistical Process Control (SPC), and electronic QMS software., • Certified Internal Auditor (ISO 9001/13485) preferred., • Lean Six Sigma Certifications preferred (Black Belt and/or Green Belt)Required Skills & Competencies, • Excellent written and verbal communication skills for interfacing customers and regulators., • Proven ability to partner and influence cross-functional teams, lead/mentor through collaboration and influence without direct authority., • Strong analytical abilities to interpret data and implement effective, sustainable solutions., • Proficient in problem solving with independent thought and judgement while using resources both internally and externally., • Work efficiently and proactively cross functionally in a team setting while being sensitive to deadlines., • High level of accuracy in document review and compliance assessment., • Successful record of ability to work both independently and in a team environment., • Skilled in statistical quality methods, Lean principles, Six Sigma, and Root Cause Analysis for data-driven decision-making., • Determined and proactive mindset who is motivated to make a difference with a high standard of excellence.Preferred Qualifications, • ASQ Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)., • Experience in a heavily regulated industry (Medical Device or Pharma)., • Administration experience for document control. Salary Range: 95,000-105,000/annual An employment offer is based on the candidate's professional experience, specialty, skillset, education, geography, related licenses or certifications, and other business needs. The compensation range indicated does not include other forms of compensation or benefits. We value the diversity of our team and inspire creativity in our innovation. elliquence proudly provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any kind without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state and local laws. We are committed to working with and providing reasonable accommodation to individuals with disabilities. If you need any reasonable accommodation due to a disability for any part of the application process, please email hr@elliquence.com. Powered by JazzHR xLI3YJSudb

Job Description Allied Maker is hiring a Client Relations Manager to own the client relationship from first contact through close. This is a senior, client-facing sales and account management role for a polished professional who can speak the language of designers, architects, and discerning principals; carry meaningful accounts; and represent the brand at the highest standard with minimal ramp. The Client Relations Manager is the primary point of contact for inbound inquiries, active projects, and key trade accounts. They produce accurate quotes, move orders forward, and convert relationships into long-term specifying behavior. They are visible from day one, expected to operate confidently before fluency is complete, and to set the standard the rest of the client-facing team is measured against. Key Responsibilities Client Communication & Relationship Ownership • Serve as the primary point of contact for designers, architects, and high-end residential clients across email, phone, and in-person showroom interactions., • Speak and write with clarity, composure, and intention; represent Allied Maker in voice and tone the way a client would expect from a luxury studio., • Hold the room with experienced clients; respond confidently under partial information without guessing, over-explaining, or losing control of the interaction., • Build long-term trust with specifying accounts so Allied Maker becomes a default specification, not a one-off purchase. Sales, Quoting & Order Coordination • Generate accurate, clean quotes and revisions; manage the full lifecycle from inquiry to closed order without items falling through., • Recognize buying signals and move deals forward at the right moment without resorting to pressure tactics., • Discuss price, lead time, terms, and trade with confidence; protect the brand's standards while keeping the client moving., • Coordinate cross-functionally with production, design, and leadership to ensure commitments made to the client are commitments the business can keep. Account Development & Brand Representation • Own a book of trade accounts; deepen those relationships through follow-through, product expertise, and consistent presence., • Represent Allied Maker at showroom visits, trade events, and select client meetings; match the tone of designers and architects in the room., • Identify opportunities to grow specification within existing accounts and surface them to leadership., • Mentor junior client-facing staff; set the bar for showroom and email interactions and reinforce the standard by example. Process, Systems & Follow-Through • Keep client and project information accurately recorded in Allied Maker's CRM and internal systems with support from the Systems Engineer and Client Strategy leadership., • Close loops reliably; nothing slips, nothing requires reminder, and escalations happen at the right time for the right reasons., • Continuously absorb product, materials, pricing, and process information; apply it immediately in live client conversations without repetition., • Handle moments of client frustration with patience and emotional intelligence; protect internal information and understand the difference between what you know and what you should say.Required Qualifications, • 6+ years of client-facing experience in design, A&D, luxury retail, hospitality, gallery, or a comparable environment where standards were high and internalized., • Demonstrated track record managing high-value accounts, complex client relationships, or a quota-bearing book of business., • Professional polish that shows up by nature, not by instruction: voice, appearance, conduct, and written communication reflect the standard of the brand without prompting., • Real phone and in-person presence: warm, composed, articulate; able to hold a room with experienced clients and walk a discerning designer through a complex quote without losing control of the conversation., • Strong written communication with attention to tone, grammar, and clarity., • Sound judgment under partial information: knows when to answer, when to escalate, and when to slow a deal down; does not guess or overcommit., • Composure under pressure: remains calm when challenged on price, lead time, or specification; does not become flustered or hesitant., • Real-time learning style: retains information quickly, applies it immediately, does not require repetition., • Reliability without supervision: consistently on time, present for full hours, comfortable operating within structure rather than testing its edges., • Available 9:00 AM to 6:00 PM, Monday through Friday, on-site in Glen Cove, without scheduling conflicts., • Emotional intelligence and discretion; able to read a room, handle frustration calmly, and protect internal information appropriately., • Proficiency with standard office tools (email, calendar, Google Workspace or Microsoft 365, spreadsheets) and CRM systems.Preferred Qualifications, • Direct experience selling to or working alongside architects, interior designers, and lighting designers., • Background in lighting, furniture, luxury home, or another high-touch design category with experienced specifier audiences., • Experience carrying a quota, an account list, or full ownership of client outcomes in a luxury or trade-driven sales environment., • Familiarity with CRM or project management tools (NetSuite, Salesforce, HubSpot, Wrike, or similar)., • Experience mentoring or setting the standard for more junior client-facing staff., • Personal curiosity about materials, craft, and design — not just professional interest.Compensation & Benefits Allied Maker offers a competitive total-rewards package benchmarked to the Long Island / NYC metro market: • Base salary range: $95,000 – $120,000 annually, commensurate with experience., • Comprehensive medical, dental, and vision insurance., • 401(k) retirement plan with company match., • Paid time off, paid holidays, and paid parental leave., • Employer-paid life and disability insurance; employee assistance program., • Employee discount on Allied Maker products.Work Environment & Physical Requirements, • On-site at the Glen Cove, NY workshop and showroom, Monday through Friday, 9:00 AM to 6:00 PM., • Primarily a client-facing, office and showroom environment with regular presence in client meetings and occasional time on the production floor., • Occasional travel for trade events, key client visits, and showroom representation., • Requires sitting and standing throughout the day, moving between client areas and workstations, and occasional light lifting up to 25 lbs for samples and materials.About Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$95,000—$120,000 USD

Job Description Job Title: Civil Engineer (PE) – Field Inspections & Quality Control Overview This role offers an opportunity for an experienced Civil Engineer to lead field-based inspections and quality control efforts on construction projects throughout New York City. You will travel to job sites across all five boroughs, conduct detailed inspections, prepare clear and comprehensive reports, and collaborate closely with contractors, architects, and project teams. This position is well suited for a licensed Professional Engineer with a civil or structural background who enjoys working in the field, resolving on-site issues, and contributing directly to successful project delivery. Key Responsibilities • Travel regularly to active construction sites throughout all five boroughs of New York City., • Perform field inspections and complete accurate inspection reports remotely in a timely manner., • Prepare detailed field reports, inspection logs, and photographic documentation that clearly capture site conditions and findings., • Submit inspection results and supporting documentation to clients and internal teams, ensuring clarity and compliance with project requirements., • Perform TPP inspections, with full training and support provided by the company., • Monitor construction activities for quality control, including concrete testing, structural inspections, and verification of materials used on site., • Review permits, drawings, and specifications to confirm construction activities align with approved plans and field conditions., • Identify on-site issues or discrepancies and recommend appropriate corrective actions., • Coordinate with contractors, architects, and project managers to resolve field issues efficiently., • Collaborate with project stakeholders to support schedules, quality standards, and successful project execution., • Maintain organized records of inspections, test results, and communications for documentation and compliance purposes. Required Skills & Qualifications • Licensed Professional Engineer (PE)., • Civil or structural engineering background with a strong understanding of construction practices and building systems., • 5+ years of professional engineering experience, preferably in field inspections, construction oversight, or structural assessments., • Strong ability to perform detailed field inspections and accurately document conditions through written reports and photographs., • Excellent analytical and problem-solving skills with the ability to recommend practical, field-appropriate solutions., • Strong communication skills for interaction with clients, contractors, architects, and internal teams., • Ability to manage multiple site visits and reporting responsibilities while meeting deadlines., • Comfortable working independently in the field across multiple NYC locations. Preferred Qualifications • ACI certification., • NICET certification., • Experience with concrete testing, structural inspections, and materials verification., • Familiarity with permit reviews, engineering drawings, and technical specifications., • Ability to adapt to changing site conditions and project schedules., • Interest in long-term professional growth within a large national organization offering clear advancement opportunities. Work Environment This is a field-based position with typical hours from 7:00 AM to 3:30 PM, with flexibility as needed for field reporting. The role is capped at 40 hours per week and converts to a salaried position upon full placement. You will not work in a traditional office setting and will instead travel throughout New York City to active construction sites. Work includes on-site inspections, monitoring construction activities, and coordination with project stakeholders. Company-provided tools and systems are used for remote reporting and documentation. The organization is part of a large national firm (approximately 46,000 employees) offering four weeks of paid time off for new employees, increasing to six weeks with tenure, along with strong professional development and career advancement opportunities. Job Type & Location This is a Contract to Hire position based out of Farmingdale, NY. Pay and Benefits The pay range for this position is $62.50 - $76.92/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Farmingdale,NY. Application Deadline This position is anticipated to close on May 29, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing process due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Job DescriptionSenior Electrical Engineer - NYC - Engineering firms, MEP Contractors and Service-based industrial companies Overview We are currently supporting clients seeking Senior Electrical Engineers to support complex infrastructure projects across the NYC and Long Island market. This role focuses on leading the design and delivery of electrical systems for large-scale, multidisciplinary projects. The ideal candidate brings deep technical expertise, strong leadership capabilities, and experience working with public agencies and infrastructure clients. Key Responsibilities Technical Leadership & Design • Lead the design and specification of electrical systems for complex infrastructure projects, including:, • Medium and low voltage power distribution, • Lighting and control systems, • Traction power and substations (rail/transit), • Communications, SCADA, and control systems, • Fire life safety and emergency power systems, • ITS, signal power, and roadway electrical systems, • Prepare and review design drawings, calculations, reports, and technical specifications, • Perform system studies including load flow, short circuit, grounding, and protection coordination, • Ensure all designs meet applicable codes, standards, and agency requirements, • Evaluate and implement innovative and sustainable electrical design solutionsProject Leadership & Coordination, • Serve as discipline lead for electrical scope on complex, multi-disciplinary infrastructure projects, • Coordinate closely with civil, structural, mechanical, and systems engineering teams, • Support project planning including schedules, budgets, staffing, and risk mitigation, • Participate in design reviews, constructability reviews, and value engineering efforts, • Maintain high-quality control standards across all deliverablesClient & Stakeholder Engagement, • Interface with public agencies, utilities, contractors, and project stakeholders, • Present technical solutions and design concepts to both technical and non-technical audiences, • Support proposal development, including scope definition, fee development, and technical narrativesMentorship & Team Development, • Mentor and guide junior and mid-level engineers, • Perform technical reviews and provide feedback to ensure quality and consistency, • Contribute to internal standards, best practices, and continuous improvement initiativesTechnical Skills, • Power distribution and substation design (MV/LV systems), • Traction power and rail system electrical infrastructure, • Electrical system analysis (load flow, fault analysis, protection coordination), • SCADA, communications, and control systems, • Fire life safety and emergency power design, • Strong knowledge of industry codes and standards (NEC, NFPA, IEEE, AASHTO, etc.)Core Competencies, • Strong leadership and project ownership capabilities, • Excellent problem-solving and analytical skills, • Ability to manage multiple large-scale projects simultaneously, • Strong communication skills across technical teams and stakeholders, • Detail-oriented with a focus on safety, quality, and complianceQualifications, • Bachelor's degree in Electrical Engineering (required), • Professional Engineer (PE) license (required), • 15+ years of progressive experience in electrical engineering within transportation or infrastructure projects, • Demonstrated experience supporting large, complex projects such as:, • Transit and rail systems, • Highways, bridges, and tunnels, • Airports or major public infrastructureAdditional Details, • Hybrid office/field environment supporting major infrastructure projects, • Opportunity to work on high-impact public sector initiatives, • Competitive compensation and leadership growth opportunityIn accordance with New York salary transparency requirements, the anticipated annual base salary range for positions is: $175k-$225k annually. Actual compensation will be based on experience, qualifications, and demonstrated project leadership background. Search managed by: Danielle Morris - danielle.morris@ LHH.com Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply Pay Details: $175,000.00 to $225,000.00 per year Search managed by: Danielle Morris Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Ranked the #4 Large Employer to Work for in America and residing in the Top 400 on Engineering News Record (ENR)'s List of Top Design Firms in the nation, TPD is currently hiring dynamic Engineers at all levels. Our ideal candidate has minimum of 4-8 years of experience, a strong work ethic, a desire to learn, the willingness to work cohesively within a team, and the ability to work on multiple projects. Additionally, we offer a creative, flexible, supportive and fun environment! Duties and Responsibilities include, but are not limited to: • Manage projects, staff and clients., • Work with multi-disciplinary teams on tasks such as work zone traffic, intersection design, traffic signal design, roadway signing and pavement marking plans, DOT access permitting, control plans and traffic signal operations analysis., • Assist in the preparation specifications, plans, construction schedules, impact studies, permits, and designs for projects., • Assist with traffic/parking studies, corridor planning, feasibility studies, and safety audits., • Coordinate with field inspection staff and serve as an on-site project representative. Job Requirements • Bachelor’s Degree in Civil Engineering, • Professional Engineering (PE) license in NY required (or ability to obtain within first 6 months), • Professional Traffic Operations Engineer (PTOE) desirable, • Excellent oral and written communication skills, • Experience with design standards, NYSDOT/NYCDOT/CTDOT/NJDOT experience (desirable), • Knowledge of CADD Software (MicroStation or AutoCAD), • Strong work ethic and ability to work on multiple projects and ability to meet multiple deadlines, • Knowledge of Microsoft Office Suite, • Valid Driver’s License Salary Range: $90,000 - $120,000 Don't meet every qualification or skill in the description? That's ok! We are fully committed to expanding our staff and culture to best serve our clients and our communities. If you are interested in this position but don't completely align with every qualification listed, we encourage you to apply. You may be what we are looking for, for this role or maybe for another open position. At TPD we exist to improve the quality of life for the public and are dedicated to Moving Forward Together.

Job Description Location This position is 100% on-site and reports to our office in Syosset, NY and various client sites. You must be local or willing to relocate at your own expense. Job Summary We are seeking a highly motivated and skilled Security Systems Estimator to join our security consultancy company. In the role you will be responsible for providing technical expertise, accurate cost estimates, and preparing the necessary contracts for Security Alarm, Video Surveillance, Intercom, and Access Control system projects. You will play a crucial role in ensuring the successful execution of projects by collaborating with and taking directions from other engineering members, sales teams, and project managers. The ideal candidate should have a strong background in problem solving, excellent analytical skills, and the ability to manage working on multiple projects concurrently and ideally bring some industry experience to the table. Salary Range $22.00 per hour - $26.00 per hour Hours Monday – Friday, 08:00am – 05:00pm. Responsibilities 1. Project Estimation: • Analyze project requirements, specifications, and drawings to prepare accurate cost estimates for security system installations, upgrades, and integrations., • Collaborate with sales teams to review project scope, identify customer needs, and provide comprehensive cost breakdowns., • Research and source pricing information for security equipment, materials, labor, and subcontractors to ensure competitive and cost-effective estimates., • Prepare detailed proposals and contracts, including scope of work, pricing, and timelines, for client submission. 1. Project Engineering: • Assist project managers in the technical evaluation and selection of security system components and technologies to meet project requirements., • Collaborate with clients, architects, engineers, and other stakeholders to design and engineer effective security solutions., • Prepare and review system designs, engineering drawings, and technical specifications., • Provide technical support and guidance to field technicians during project implementation. 1. Project Coordination: • Assist in supporting communication with clients, subcontractors, suppliers, and internal teams to coordinate project activities, resolve issues, and provide regular updates., • Participate in project meetings, providing technical expertise and recommendations as needed., • Be able to contribute to the analysis of project progress, identify deviations, and implement corrective actions to maintain project schedule and quality standards. 1. General Office: • Maintaining Office areas, • Any and all other duties as assigned by the management team., • Ensuring compliance with requirements in terms of legality and liability., • Assisting with monitoring and ordering office supplies and project-related materials., • Coordinating meetings, site visits, and project timelines with internal teams and clients., • Supporting communication with suppliers to ensure timely delivery of equipment and materials. Basic Qualifications • Two (2) year Associate Degree or equivalent credits towards a four (4) year Bachelor’s Degree, • In depth knowledge of Microsoft Office Suite, including Microsoft Project, • Excellent analytical and problem-solving skills, with attention to detail., • Ability to read and interpret technical drawings, specifications, and blueprints., • Must be able to fluently communicate in English with a working knowledge of grammar and spelling required., • Effective communication and interpersonal skills to collaborate with clients & team members, both verbal and written., • Strong organizational and time management abilities to handle multiple projects simultaneously., • Valid Driver’s License and clean driving record. Preferred Qualifications • Degree in Stem Field or equivalent., • Proven experience as a Project Engineer, Estimator, or similar role., • Proficiency in AutoCAD., • Knowledge of security systems, including access control, CCTV, intrusion detection, and related technologies., • Knowledge of local building codes, regulations, and industry standards related to security systems is a plus. Working Conditions • The majority of work is performed in an office environment, with limited opportunities for on-site job visits. Employee may occasionally be required to lift up to 20 lbs. What awaits you at Intelli-Tec Security: • Benefits that include Medical, Dental, Vision, 401k, and PTO, • Joining our team offers an exciting opportunity to work on innovative security solutions while enjoying a competitive salary, comprehensive benefits, and a dynamic environment for professional growth. Employer’s Disclaimer: • All requirements are subject to possible modification to reasonably accommodate individuals with disabilities., • This job description in no way states or implies that these are the only duties to be performed by the employee occupying this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by their supervisor., • This document does not create an employment contract, implied or otherwise, other than an “at will” employment relationship. INDITNY

Job Description The Pre-Production Coordinator is the central nervous system for the parts that build every Allied Maker fixture. Servicing the entire company from our core catalog of components, this role owns the accurate interpretation of bills of materials, the skilled pulling of parts from inventory, and the smooth handoff of those parts to downstream departments - metal finishing, glass, wood, electrical, assembly, and custom. It takes technical know-how, an eye for detail, and genuine discernment about parts and materials to do this job well. Key Responsibilities BOM Interpretation & Kit Preparation • Read and interpret bills of materials (BOMs) for standard collection fixtures and custom orders; identify every part required and resolve ambiguities with Design and Pre-Production II., • Pull parts from the central inventory in the correct quantities, verifying part numbers, revisions, and finish variants before release., • Stage parts for delivery to the correct department at the correct stage of production (machining, finishing, glass, wood, electrical, assembly, custom). Inventory Management in WMS • Work fluently inside Allied Maker's warehouse management system (WMS): receiving transactions, location moves, cycle counts, and issue-to-job transactions., • Maintain part-location accuracy and flag discrepancies between physical stock and system counts for resolution., • Keep bin locations organized, labeled, and logical so any team member can locate a part quickly. Technical Judgment • Use material and finish knowledge to distinguish visually similar parts (e.g., brass finishes, sister-SKU hardware, glass shapes) and catch mis-picks before they reach the floor., • Escalate quality concerns on pulled parts to the Quality Control Engineer rather than passing suspect material downstream., • Suggest improvements to bin layout, labeling, and pick routes based on day-to-day experience. Cross-Functional Coordination • Communicate daily with Procurement, Manufacturing, Assembly, and Custom teams about incoming work and stock positions., • Support new product introductions by staging parts for prototypes and first production runs.Required Qualifications, • 1–3 years of experience in warehousing, inventory, kitting, or light manufacturing., • Strong attention to detail and a discerning eye; able to tell very similar parts apart., • Comfortable working with computer-based inventory systems, scanners, and structured transactions., • Ability to read and understand a bill of materials and simple mechanical drawings., • Physically able to stand, walk, climb a ladder, and lift up to 40 lbs throughout the day., • Reliable, organized, and team-oriented; willing to be flexible as priorities shift.Preferred Qualifications, • Prior experience in custom manufacturing, lighting, furniture, or luxury goods., • Familiarity with NetSuite, WMS, or ERP-based inventory tools., • Working knowledge of metal finishes (brass, aluminum, plating), glass, and wood species., • Forklift or order-picker certification.Compensation & Benefits, • Base salary range: $55,000 – $70,000 annually (based on experience), • Annual discretionary bonus, • Medical, dental, and vision insurance, • 401(k) with company match, • Paid time off, holidays, and parental leave, • Employer-paid life and disability insurance, • Employee assistance program, • Safety shoes and prescription eyewear allowance, • Employee discount on Allied Maker productsWork Environment & Physical Requirements, • On-site at the Glen Cove, NY workshop, • Active shop-floor environment; safety glasses and closed-toe footwear required, • Requires standing, walking, reaching, climbing, and lifting up to 40 lbs regularlyAbout Allied Maker Allied Maker is an American design and manufacturing studio creating luxury-crafted lighting fixtures. Based in New York, each piece is made to order by a dedicated team of craftspeople, with a focus on authentic materials, refined form, and enduring quality. The studio operates at the intersection of design, engineering, and manufacturing. Ryden Rizzo leads product design and form. Lanette Rizzo leads design direction, production, and client strategy. Together, they set a standard where design integrity, engineering, and performance are inseparable. Allied Maker is widely specified by leading architects and designers and continues to expand its capabilities while maintaining a singular focus: deliver artisan-crafted, highly engineered, sophisticated yet simple lighting design solutions. Salary Range Annually$55,000—$70,000 USD

Job DescriptionTech/Electronics company located in Plainview NY is looking for a Production Engineer to join their team. Full benefits including 26 days off the first year and bonus. Being the Production Engineer, you will help with the engineering and quality agenda with the overall goal to improve the customer satisfaction. You are the main contact towards the suppliers and work as part of the business team together with the supplier to develop and secure the production process, handling of quality deviations, and secure compliance to all company requirements. About the assignment: The Production Engineer is responsible for Quality Assurance including to secure process control for key processes in production. Among other things, you:• Develop new manufacturing processes, and equipment to ensure manufacturing is efficient and effective.• Investigate and analyze problems and derive solutions in the manufacturing process.• Transfer R&D prototypes into series production phase and document the manufacturing processes.• Perform and create First Article Inspection Documents. • Perform Product audits and production risk assessments at suppliers • Develops the recipe with suppliers to match desired taste profile quality and nutrition. • Lead the Supplier Development for quality and manufacturing with responsibility to identify and implement actions and execution of SDP projects. • Lead industrialization of minor news development and contribute with competence to other new developments. Knowledge about Total Quality Management - University degree in Engineering or correspondingPrevious experience as Process or Production Engineer in manufacturing PreferredExperience of industrial production conditions and Lean manufacturing Contact Michael Panter for more details: mpanter@bachrachgroup.com

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job DescriptionSalary: $70k-$80k Hybrid Local to NYC (ability to travel onsite to client locations as needed) Salary $70k-$80k Department Service Delivery Reports To Service Manager About the Company ADDA is partnering with a fast-growing, high-performing IT Managed Service Provider (MSP) serving clients across diverse industries. The organization is known for exceptional, communicative client service, a collaborative team culture, and a modern, non-tiered support model where team members are trusted to own problems end-to-end. Were looking for an IT Support Specialist who leads with outstanding customer service, thinks critically and holistically about systems, and deeply enjoys diagnosing and solving complex, technical problems while building strong, professional client relationships. The Role As an IT Support Specialist, youll be a primary, client-facing point of contact, responsible for expertly resolving advanced technical issues, driving long-term and systemic fixes, and continuously improving how support is delivered. This is not a call-center or ticket-churn roleit is a role for an engineer who excels at both technical mastery and client relationship management. Youll work across multiple client environments, communicate proactively and clearly with stakeholders, and take complete ownership from initial request through resolution and follow-up. Success in this role requires both advanced troubleshooting capability and excellent customer-facing judgment and empathy. What Youll Do • Serve as a trusted, client-facing technical authority for escalated and complex support needs, managing both the technical solution and the client's experience., • Expertly diagnose and resolve difficult, non-routine issues across Windows, macOS, Linux, Microsoft 365, Google Workspace, and mixed cloud/on-prem environments., • Own issues end-to-end including in-depth investigation, root cause resolution, meticulous documentation, and consistent client communication., • Provide advanced support for networking components such as firewalls, switches, VPNs, VLANs, DNS/DHCP, Wi-Fi, and routing, including complex troubleshooting and configuration., • Partner with teammates in a non-tiered support structure that values cross-functional collaboration and shared ownership., • Participate in client projects including migrations, deployments, security initiatives, and system upgrades., • Identify recurring issues and recommend automation, tooling improvements, or process changes., • Maintain clear, accurate documentation and contribute to internal knowledge resources., • Provide onsite support to NYC-area clients as needed. Technology Youll Work With Experience with all tools is not required. Exposure to several is strongly preferred. • Cloud & Productivity, • Microsoft 365, Azure AD, Intune, • Google Workspace, • Systems, • Windows Server, Active Directory, Group Policy, • macOS with MDM solutions such as Jamf, • Networking & Security, • Meraki, UnifiSonicWall, • VLANs, VPNs, Wi-Fi administration, • Endpoint security and EDR tools, • MSP Tooling, • RMM platforms such as NinjaOne, • PSA tools including HaloPSA, • Backup platforms like Datto or Acronis What Were Looking For • 25+ years of demonstrable experience in an MSP or fast-paced, multi-client, multi-site IT support environment., • Exceptional troubleshooting skills across systems, networking, cloud services, and security fundamentals. You must be able to diagnose problems beyond level 2 support., • Proven, customer-first mindset with outstanding interpersonal skills and the ability to communicate complex technical concepts clearly and calmly to non-technical users and C-level stakeholders., • High level of comfort diagnosing unfamiliar technologies through logic, research, and experimentation, not just rote knowledge., • High ownership mentality you dont pass problems along, you solve them and manage the client relationship through the entire process., • Proactive approach to improving processes, documentation, and tooling., • Desire to keep learning and expanding technical depth., • Certifications (Microsoft, Cisco, CompTIA, etc.) are a plus but not required. Why Youll Love Working Here • Elite Support Culture: Technical excellence paired with deep, consultative client relationships., • Non-tiered Team Structure: Autonomy to solve problems end-to-end, accountability, and direct control over the client's positive outcome., • Variety and Growth: Exposure to diverse environments that rapidly build expert-level troubleshooting skills., • Impact-Driven Work: Your ideas for efficiency, automation, and improvement are encouraged and implemented., • Supportive Culture: Curious, collaborative teammates who value quality work, mutual respect, and strong communication.

Quality Specialist (QA/QC – Inspection & Documentation). ISO and AS9100 quality systems. Analyze quality data and assist with.

H2M architects + engineersis seeking a dynamic, hands-on future-focused Innovation Project Manager to drive transformative initiatives that elevate our Learning & Development programs, operational processes, and firmwide innovation culture. Evaluate and recommend new learning technologies, digit

Civil Engineering Project Engineer and Project Manager – Land Development. In compliance with the Immigration Reform and Control Act of 1986, we will hire only U.

Ensure all fieldwork complies with project specifications, drawings, and quality control standards. Their primary function is to manage projects from pre-construction through closeout, ensuring they are completed on time, within budget, and in accordance with all quality and safety standards. Coordi

Develop and oversee change management plans and follow change control protocols to ensure smooth transitions for stakeholders.

Looking for an experienced Business Analyst/Project Manager who will be responsible for understanding and assessing the changing needs of the business.Frequently analyze the impacts of change, document and support communication between relevant groups and stakeholders, and capture requirements neede

Ensure all fieldwork complies with project specifications, drawings, and quality control standards. Construction Management or Engineering. Their primary function is to manage projects from pre-construction through closeout, ensuring they are completed on time, within budget, and in accordance with

Coordinate with architects, engineers, subcontractors, and vendors.

Sole practitioner role (no direct reports) expected to run projects cradle-to-grave with limited internal controls support. Supported by Global Procurement, Workplace Strategy & Planning (finishes/logistics), Security, IT, and Engineering. Advanced proficiency developing and managing schedules and c

Participates in preparation of Performance Improvement reports for care services presentation at committee meeting; reports to Hospital Quality Management for external benchmarking as needed. Participates in special projects related to quality issues; assists in recommendations and coordinating impl

Advanced proficiency developing and managing schedules and controls in Microsoft Project. Procurement, Workplace Strategy & Planning, Engineering, IT, Security, and Legal, while leading external consultants, contractors, and vendors to successful delivery. Establish and maintain practical project co

Strong knowledge of relocation planning, move sequencing, inventory control and asset tracking systems.

Lead change control and cost validation; provide clear financial reporting to stakeholders. Cross-collaborate with Legal, Global Procurement, Workplace Strategy & Planning, Engineering, IT/AV, Security, EH&S, Facilities Operations, and end users. Sole practitioner role (no direct reports) expected t

Architecture or engineering education or experience.

Assistant Project Manager (HVAC).We are seeking a motivated and detail-oriented.This hybrid role combines project coordination with job costing responsibilities, making it ideal for someone who understands both field operations and construction accounting.You’ll support multiple HVAC or constructi

Work closely with Superintendents, Project Engineers, and Assistant Project Managers to drive project execution. Promote a culture of safety, professionalism, quality, and operational excellence. Strong knowledge of construction operations, project controls, budgeting, forecasting, and contract admi

Partner with internal teams to ensure quality control throughout the build process and during installation. This role is responsible for managing project scope, timelines, deliverables, budgets, and most critically, ensuring on-time, high-quality delivery and client satisfaction.

Supported by Global Procurement, Workplace Strategy & Planning (finishes/logistics), Security, IT, and Engineering. Advanced proficiency developing and managing schedules and controls in Microsoft Project. Procurement, Workplace Strategy & Planning, Engineering, IT, Security, and Legal, while leadin

Civil Engineering Project Engineer and Project Manager – Land Development. In compliance with the Immigration Reform and Control Act of 1986, we will hire only U.