Trabajos school maintenance en New Brunswick, New Jersey - Page 2Crear alertas

Job DescriptionDescription: We are searching for Industrial Maintenance Technician to join our Maintenance Team! Our Associates enjoy full-time hours, job stability and job growth. We take care of you, as you help us take care of thousands of medical patients and providers. What You'll Do: Working under limited supervision, the Black Seal Operator has hands-on experience with high-pressure boilers, as well as a working knowledge of sump pumps and water heater installations. This position is responsible for performing skilled work in the following areas: mechanical, electrical, pneumatic, plumbing, boiler, wastewater and general maintenance of equipment/structures and resolving emergency situations by taking appropriate corrective action and completing the repairs needed to ensure that systems are operational and are functioning safely and efficiently. • Operate, maintain, and troubleshoot high-pressure steam and hot water boilers in compliance with state and local codes., • Conduct routine inspections, diagnostics, and preventive maintenance on boiler systems, burners, and associated controls., • Monitor boiler readings, maintain logs, and ensure optimal performance and energy efficiency., • Install, service, and repair water heaters (gas and electric) as needed., • Maintain, troubleshoot, and replace sump pumps, including float switches, check valves, and discharge piping., • Perform water treatment testing and adjust chemical feed systems to maintain proper water quality., • Respond promptly to emergency calls and troubleshoot mechanical, plumbing, and heating issues during on-call hours., • Ensure compliance with Black Seal high Pressure Boiler Operator licensing requirements and safety standards., • Assist with general facility maintenance as directed, including light plumbing, electrical, and HVAC support., • Valid Black Seal high Pressure Boiler Operator License in New Jersey, • Minimum 3 years of experience operating and maintaining low-pressure boilers, • Hands-on experience with sump pump systems and water heater installation/repair, • Ability to read and interpret technical manuals, blueprints, and schematics, • Strong understanding of safety regulations, codes, and emergency procedures, • Valid driver’s license and reliable transportation, • Ability to work independently and as part of a team, • Typically requires accreditation from a technical school or an applicable skilled trades program and 7 to 10 years of industrial maintenance experience or the equivalent., • Equipment Maintenance, Technical Understanding, Technical Zeal, Deals with Uncertainty, Basic Safety, Power Tools, Attention to Detail, Flexibility, Supervision, Job Knowledge, Productivity, • Must have a working knowledge of AC and DC circuits with the ability to work on voltages ranging from 5 Volt DC to 480 Volt AC. Must be able to fluently read mechanical and electrical blueprints, • Must possess the knowledge to operate basic computer software such as Word, Excel, and Outlook as well as work with a Computerized Maintenance Management System., • Required to provide own set of tools., • Must have a valid driver license. Why Work with Us? Competitive Starting Wage Comprehensive Benefits including: • Medical, Dental, and Vision Insurance, • 401k with Company Match, • Paid Time Off & Paid Holidays, • Quarterly Customer Service Bonus Program, • Company Paid Life Insurance, • Employee Assistance Program Nixon Medical is proud to partner with WorkStep, a cutting-edge text messaging-based associate feedback platform, to drive an amazing culture of associate engagement and continuous improvement. We believe to grow and create opportunities that enrich each other’s lives, opportunities must be available to all. Our commitment to having a diverse, equitable, and inclusive workforce will strengthen our progress to continue offering long-term career opportunities while providing best-in-class solutions for our customers. Nixon Medical is an equal opportunity employer #IND1

Job Description Position Overview: This position is responsible for performing a wide range of semi-skilled and skilled maintenance, repair, and restoration work across manufacturing, office, and support areas. This role supports the installation and relocation of production and office equipment, monitors and performs minor upkeep of major utility systems, and ensures general building, grounds, and facility operations are maintained in a safe and functional condition. Key systems supported include air compressors, furnaces, chillers, vacuum pumps, HVAC equipment, plumbing, and general building infrastructure. This position plays a critical role in maintaining production readiness and overall facility reliability. Key Responsibilities: • Support daily operations of manufacturing plants, buildings, and office areas under the direction of the Facilities Director and Facilities Supervisor, • Install, relocate, and remove production equipment using rigging, forklifts, pallet jacks, equipment skates, and similar tools, • Connect equipment to facility utilities including water, coolant, compressed air, vacuum, and wastewater drainage, • Maintain and repair building systems and components including doors, turnstiles, plumbing fixtures, leaks, locks, stairs, racking, guardrails, monitors/TVs, wastewater pumps, and related infrastructure, • Relocate office furniture and equipment; install or remove cubicles, signage, shelving, worktables, and filing cabinets as needed, • Serve as the first line of response to facility and production support issues prior to engaging external contractors for major system repairs (e.g., air compressors, vacuum pumps, furnaces, chillers, RODI systems, nitrogen systems), • Technician is not expected to perform major equipment repairs but must understand system operation and provide temporary solutions and guidance, • Conduct daily facility and property inspections to identify safety concerns and take immediate corrective action, • Perform a broad range of skilled maintenance tasks over extended periods, • Complete work in compliance with OSHA regulations and safety practices, including lockout/tagout procedures, • Read and interpret sketches, diagrams, and blueprints, • Fill in for janitor/custodial functions, when necessary., • Source parts for repairs and regular maintenance., • Coordinate with external service providers for equipment and facilities repair, when required., • Timely Corrective Action response and resolution to relevant situations., • Engage and support companywide Safety and Cleanliness Programs., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices., • A minimum of 7 years of Maintenance Experience. Including methods, practices and equipment used in facilities management and activities, including a variety of building trades work., • High School Graduate required. College or Trade School preferred., • Electrical, Mechanical, Welding, Electro-Mechanical and equipment training, a plus., • Knowledge of tools and equipment used in building maintenance, reconstruction and repair work., • Experience with a virtual work order and spare parts management system preferred., • Strong analytical skills., • Task oriented excellent organizational skills, ability to prioritize work load., • Versatile "jack-of-all-trades" maintenance skill set, • Plumbing experience required, primarily PVC socket weld and occasional threaded pipe, • HVAC experience strongly preferred, • General mechanical aptitude, • General construction knowledge (e.g., wall repair, painting), • Must be able to lift 70 lbs, • Must be able to sustain physical work for 8+ hours on a standard 3 shift operation or 12+ hours per day on 24/7 operation. Also includes the following:, • Standing, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended., • Sometimes subject to external weather conditions., • Short notice, overtime demand according to equipment or facility breakdowns., • Repair work on heavy equipment often in a seated or standing position., • Grease, oil, water exposure., • Majority of facilities are air-conditioned year-round About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description Position Overview: This position is responsible for ensuring the continuous functionality of all production equipment. Key Responsibilities: • Perform regularly scheduled preventive maintenance on all production equipment and machinery., • Perform emergency repairs on all production equipment and machinery., • Conform to all procedures regarding spare parts usage., • Perform repairs and maintenance according to any and all OSHA and other safety requirements, i.e.: lockout/tagout., • Perform all maintenance and repairs in an accurate, complete and timely manner., • Maintain mechanical availability of all production equipment., • Maintain mechanical availability of all facility equipment. Other Important Responsibilities: • Maintain a daily log of Preventive Maintenance and downtime through Computerized Maintenance Management System, Simplicity CMMS, • Maintain a daily work log and EOD/end of day email report to Upper management., • Assist the Parts Inventory Clerk with proper specs and info when sourcing parts for repairs and regular maintenance., • Work with outside contractors during routine maintenance and emergency repairs., • Timely Corrective Action response and resolution to relevant situations., • As required, will install new equipment, facility upgrades, perform repair work as needed and support production., • Engage and support companywide Safety and Cleanliness Programs., • As part of the EMS- Environment Management System, will meet compliance obligations and accountability by contributing but not limited to the company's recycling guidelines, proper waste and other environmental performance practices, • Will be required to perform other job functions, as assigned Qualifications: • A minimum 7-10 years (or more) of relevant experience., • Electrical, Mechanical, Welding, Electro-Mechanical and equipment training, a plus., • High School Graduate required. Vocational Degree Preferred., • Experience with a virtual work order and spare parts management system preferred., • Strong analytical skills., • Task oriented excellent organizational skills, ability to prioritize work load., • Enthusiastic attitude, cooperative team player, adaptable to new or changing circumstances, professional demeanor, self-motivated, creative and innovative. Physical requirements and work environment: • Must be able to lift 70 lbs., • Must be able to sustain physical work for 8+ hours on a standard 3 shift operation or 12+ hours per day on 24/7 operation. Also includes the following:, • Standing, • Reaching and pulling, • Sight, • Walking through shop, • Bending, climbing and crouching., • Office environment is of moderate noise level., • Shop noise levels are such that protective ear-coverings are recommended., • Sometimes subject to external weather conditions., • Short notice, overtime demand according to equipment or facility breakdowns., • Repair work on heavy equipment often in a seated or standing position., • Grease, oil, water exposure., • Mechanics must provide all industry required hand tools and tool box. Checklist will be provided. All specialty tools will be provided by CompoSecure. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description SunnyD is an orange drink with a unique, boldly original taste that’s unmatched. From our classic Tangy Original to our variety of other flavor blends, each has a one-of-a-kind flavor for a one-of-a-kind you! Benefits: • Competitive medical, dental, and vision, • Employer Paid Life Insurance, • 401k Match- From Day 1 of Employment, • 11 Paid Company Holidays, • Safety Shoe Reimbursement, • Prescription Safety Glasses Reimbursement, • Employee Discounts through LifeMart, Staples, Skechers, etc., • Employee Assistance Program, • Bring Home a Case of SunnyD! We are seeking a Forklift Operator for our Dayton, New Jersey plant. The Forklift Operator will be a key player in our plant operations. The ideal candidate will be passionate about our products, dedicated to excellence, and eager to contribute to our mission of providing delicious and refreshing beverages to consumers nationwide. Job Description: • Loading and unloading trucks in our warehouse., • Tracking inventory using our scanning system., • Removing pallets from the production line using a forklift., • Operate palletizers, troubleshoot photo eye sensors, proxies, machine controls, etc., • Perform stocking for palletizers according to standard procedures., • Additional task as assigned. Requirements: • Prefer individuals with at least 1 year experience in a manufacturing environment, • Must be 18 years of age or older, • Must be authorized to work in the U.S., • High school diploma or equivalent, • Pass a drug screen and physical, • Must possess a valid driver’s license Physical Requirements: • Stand on hard surfaces such as concrete for extended periods, up to 12 hours per shift, • Lift and carry materials weighing up to 60 pounds, • Climb stairs, ladders, platforms, and other structures on equipment or buildings to inspect, operate, maintain, or troubleshoot, • Bend at the knees, twist the back, and kneel as needed to access equipment for operation, maintenance, or troubleshooting, • Work indoors and outdoors in varying seasonal temperatures and humidity levels, • Function effectively in areas of high noise while using proper personal protective equipment (PPE) Salary: • $22.06 an hour with shift differential, • Learn to Earn environment, opportunity to earn $26 an hour within the first year of employment. Shift: • 3rd Shift: Monday-Friday 10:30pm-7:00am, • 4 Night Schedule: M-Th 8:30pm-7:00am

Job DescriptionDescription: We are searching for Industrial Maintenance Technician to join our Maintenance Team! Our Associates enjoy full-time hours, Monday - Friday, job stability, and job growth. We take care of you, as you help us take care of thousands of medical patients and providers. What You'll Do:Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on motors, pneumatic systems, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Electrical & Controls: • Troubleshoot, repair, and maintain industrial electrical systems up to and including 480 VAC, including motors, VFDs, motor starters, relays, sensors, and control panels., • Diagnose control circuit failures using schematics and electrical prints., • Perform advanced troubleshooting on PLC-controlled equipment, including I/O diagnostics and basic logic review (no programming required), • Perform advanced mechanical troubleshooting and repair on conveyors, gearboxes, bearings, shafts, couplings, pumps, dryers, presses, and other industrial production equipment., • Conduct precision alignment, tensioning, and adjustment of mechanical components to manufacturer specifications., • Troubleshoot and maintain steam distribution systems, including steam traps, valves, condensate return systems, heat exchangers, and piping., • Support safe operation of boiler and thermal systems in compliance with applicable codes and permits., • Diagnose and repair industrial plumbing systems, including water, wastewater, chemical dosing, and process piping., • Troubleshoot and maintain hydraulic and pneumatic systems, including pumps, cylinders, valves, regulators, and compressors., • Perform MIG/TIG/Stick welding to support equipment repair and improvements., • Maintenance Systems & Documentation, • Execute preventive and corrective maintenance tasks using the CMMS, including accurate work order documentation., • Maintain equipment history, parts usage, and maintenance records to support data-driven decision-making., • In-depth knowledge of industrial maintenance practices, reliability principles, and preventive maintenance strategies., • Working knowledge of industrial equipment, boilers, wastewater systems, and industrial utilities., • Medical, Dental, and Vision Insurance, • 401k with Company Match, • Paid Time Off & Paid Holidays, • Company Paid Life Insurance #IND1

Job DescriptionJob Type: Full-time Restoration Crew Chief/Supervisor About the Company SERVPRO of East Brunswick/Princeton Meadows is a trusted leader in the restoration industry, providing 24/7 emergency services for water damage, fire damage, mold remediation, and more. Locally owned and operated, we proudly serve our community with professionalism, speed, and compassion helping homes and businesses recover from unexpected disasters. As part of the nationally recognized SERVPRO network, we combine the strength of a national brand with the care and personal attention of a local business. Our team is highly trained, certified, and committed to delivering top-quality service using the latest equipment and industry best practices. If you're looking to build a rewarding career in a fast-paced environment where no two days are the same, join our team and help make a difference in peoples lives when they need it most. Benefits: • 401(k) matching, • Health insurance, • Paid time off, • Overtime Pay, • Bonus Pay, • Competitive compensation, • Paid training, • Career progression, • Personal and professional developmentKey Responsibilities:, • Perform and evaluate restoration activities including but not limited to, water, sewer, fire & mold cleanup, set-up of specialty equipment and demolition., • Load, inventory, and maintain work vehicles with tools, equipment, and all necessary supplies for each project, • Explain, monitor, communicate and respond to customer needs/concerns., • Communicate clear expectations to Production Technicians and supervise their activities., • Coordinate and perform restoration processes as scheduled and ensure quality control., • Manage electronic job file documentation to ensure complete and accurate job details., • Manage and control labor and consumable usage on assigned projects. Manage assets by protecting and using equipment and materials properly., • Identify safety hazards, communicate, and establish control measures to ensure the safety of occupants and workers., • Follow and oversee safe work practices and adherence to safety and risk management guidelines., • Coach and train Restoration technicians., • Communicate with Restoration manager and office staff on project progress and issues., • Perform daily, weekly, and monthly vehicle maintenance and equipment maintenance, as assigned., • Oversee facility and grounds maintenance, as assigned., • Continue development of Restoration expertise in services, cleaning products, and equipment., • Other tasks/duties as required by employer.Position Requirements:, • Effective written and oral communication., • IICRC certification preferred., • Valid drivers license a must., • Because we provide 24-hour emergency service, must be willing to be on call when needed., • Some night and weekend work is required. Flexibility is a necessity., • High school diploma/GED, • Minimum 1 year of experience in cleaning, restoration., • Experience in a supervisor role preferred.Skills/Physical Demands/Competencies:, • Ability to lift a minimum of 50 pounds regularly, occasionally up to 100 pounds with assistance, • Ability to climb ladders, work at ceiling heights, work in tight spaces (e.g., crawl spaces, attics), • Ability to repetitively push/pull/lift/carry objects, • Ability to work with/around cleaning agents

Job DescriptionPackaging Maintenance Mechanic Role & ResponsibilitiesThe following responsibilities are included but not limited to: • Responsible for the continuous functioning of various types of manufacturing packaging line systems and equipment within the Packaging and Manufacturing departments., • Perform the setup of manufacturing and packaging equipment, routine maintenance, repair, minor electrical troubleshooting, and partner with the engineering team to install and commission new manufacturing and process equipment., • Troubleshoot and repair all packaging line systems and equipment including liquid filling, powder filling, tablet filling, and all secondary packaging equipment., • Perform system modifications of existing lines as needed., • Conduct root cause analysis, problem identification, reference technical documentation, assess material requirements, place requisitions, and perform actual repairs., • Maintain inventory for spare parts and manage replacement of parts., • Perform preventive maintenance to ensure all packaging equipment functions properly, and follow and execute preventative maintenance schedules., • Provide accurate and timely documentation in equipment logbooks, and communicate effectively with coworkers during shift handoffs., • Train team members on equipment issues to eliminate future occurrences., • Maintain a solid understanding of cGMP practices and concepts, SOPs, Lock Out Tag Out (LOTO), and OSHA regulations.Education & QualificationsEducation, • High school diploma required; two-year advanced level preferred.Job Qualifications, • Able to work independently and complete work orders in a professional and timely manner., • Excellent understanding of packaging activities and document-described situations.Experience & SkillsExperience, • Minimum 5 years of relevant experience required.Skills, • Ability to work independently — Intermediate level., • Strong verbal and written communication skills — Advanced level.Specialized Knowledge, • Microsoft Office Suite (Word, Excel, Outlook)., • Strong general maintenance knowledge.Job-Specific Requirements, • Ability to read, comprehend, and follow SOPs written in English., • General mechanical and electrical troubleshooting skills necessary to diagnose, disassemble, repair, and reassemble packaging equipment., • Knowledge of packaging equipment setup, adjustments, and packaging documentation is preferred., • Must be able to wear personal protective equipment (PPE)., • Maintain a clean and orderly work area during all operations within the facility., • Flexible to work extended hours and on weekends as required.Physical Requirements, • Ability to lift up to 50 lbs. #ZIPNE

Job Description Glow Express Car Washes of Edison, Old Bridge, & Long Branch NJ Pay is weekly, with potential for daily tips, and weekly commissions (Offering Full-time and Part-time Positions with consistent and/or flexible hours) Glow Express Car Wash is a Central New Jersey-based company that is changing the game in the car washing industry! When it comes to hiring, we look for high-integrity employees with a desire to work in a fun, fast-paced environment in a rapidly growing local company. As a growing company, there is always potential for advancement. Our goal is to promote from within whenever possible. Come join our exciting team! Job Description of a Customer Service Representative at our sites: • Facilitate the speedy processing of customer vehicles by following correct procedures, • Possess a positive, friendly, and motivated attitude, • Be able to maintain eye contact and smile while interacting with guests, • Regularly clean and maintain facility and equipment, • Perform preventative maintenance on car wash equipment, • Make uncapped commission and bonuses through the sale of unlimited wash membershipsOther Notes:, • Part Time / Full Time & Consistent Scheduling / Flexible Hours Available, • Compensation is based on experience. Starting pay is $16/hour plus tips and daily opportunity for commission., • Required education: High school graduate or equivalent, • Monday to Friday, • Weekends as neededEducation:, • High school or equivalent (Required)License/Certification:, • Driver's License (Required)

The Corporate Counsel is responsible for managing various legal matters pertaining to Terumo Americas Holding, Inc. and certain of its subsidiaries and affiliates (collectively “TAH”), including clinical and medical affairs, commercial operations, contracting, healthcare compliance, employment law, corporate governance and intellectual property matters. Additionally, the Corporate Counsel will work with VP & Deputy General Counsel – Legal to develop long and short-term plans pertaining to legal matters to best manage TAH’s legal activities and minimize the risk to the business. Provide legal support and advice to TAH management and various internal business functions. Provides business with effective advice on company strategies and their implementation while ensuring adherence to state, federal, and international laws and regulations. Oversees reviewing, drafting, and negotiation of various commercial agreements. Will be responsible for protecting TAH against legal and compliance risks. Job Details: • Prepares, drafts, reviews, negotiates and modifies a wide variety of commercial contracts and other documents with legal significance, including but not limited to clinical trial agreements, sales agreements, GPOs, procurement agreements, consulting agreements, business development agreements, clinical affairs agreements, and confidentiality agreements., • Identifies, researches and provides advice on complex legal and commercial compliance issues and develops resolutions to those issues., • Exercises considerable judgment in identification of risks and proposals of alternative solutions to mitigate risks involved in potential transactions., • Assist in the identification, delivery of advice on and resolution of highly complex legal and commercial compliance issues., • Assists on strategic transactions and other mission critical initiatives., • Identifies the need for, initiates and develops language for the implementation of legal or commercial compliance policies., • Assists in the preparation and maintenance of corporate records for various TAH entities worldwide., • Stays current on developments in applicable laws, regulations and industry codes of ethics and practices., • Oversee the selection, management and evaluation of all outside counsel., • Interprets laws, rulings and regulations for the company and recommends appropriate changes or actions., • Maintain compliance with all Quality System requirements by maintaining a strong working knowledge of assigned training requirements. Fully adhere to all applicable government regulations, international guidelines and Terumo’s policies at all times. Establish and promote a work environment amongst co-workers that supports compliance with the Quality System and Terumo’s policies., • Perform other job-related duties as assigned. Position Requirements: • Knowledge, Skills and Abilities (KSAs), • Demonstrate understanding of market challenges, organizational scale requirements, and the legal processes needed to support a rapidly growing company., • Strong communication skills, including written communications, presentations, rapport building, negotiating and influencing skills., • Excellent team leadership and collaboration skills with internal clients, external collaborators or partners, and other stakeholders., • Adept at the leadership and management of change with the ability to diagnose and solve problems, articulate a plan, and implement solutions., • Basic understanding of FDA Regulations, the Sarbanes-Oxley Act, and knowledge of U.S. health care compliance and global anti-corruption and anti-bribery laws and regulations (e.g., FCPA, Stark and Anti-Kickback)., • Extensive knowledge and experience in clinical and medical affairs, contract law, health care law, intellectual property law including patent law and licensing, and employment law., • Broad knowledge of relevant laws and regulations, analytical ability, business savvy, and a balance of legal, compliance and operational experience. This team player must relate well to all levels of employees and external stakeholders., • Knowledge of Word Processing, Spreadsheet, Database, and Internet software., • Background Experiences, • Requires Juris Doctor from an accredited law school. Member of the bar in good standing; admission to New Jersey state bar preferred., • Minimum 6 years’ of legal experience in a relevant law firm or corporate setting., • Medical device, pharmaceutical, life science, or other healthcare related experience preferred., • Experience managing and dealing effectively with a broad range of legal matters across the spectrum of clinical and medical affairs, commercial contracting, employment law, compliance programs, intellectual property, mergers and acquisitions, product liability and any and all laws and statutes related to the healthcare industry., • Experience dealing with international organizations and the broad issues encountered while dealing with differences of opinion and approach to international business issues.

About Wakefern Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite, Price Rite Marketplace, The Fresh Grocer, Dearborn Market, Gourmet Garage, Fairway Market, and Di Bruno Bros. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best-in-class procurement practices. Summary The Corp Counsel provides legal advice, recommendations, oversight and guidance with respect to all legal issues and areas of law that impact the Company, with an emphasis in transactional, corporate finance, real estate, and M&A. The Corp Counsel regularly handles the negotiation of a wide array of agreements from all divisions within the Company, as well as the review and drafting of other legal documents, such as policies, guidelines, and presentations. This individual, under the direction of the Assistant General Counsel, will provide counsel to business partners and management within the Company, as well as to the Company’s cooperative membership, and will liaise and consult with outside legal counsel, as necessary. The Corp Counsel also advises and provides legal advice to the management of the Company’s subsidiaries on legal issues and risks impacting the subsidiary, to support the achievement of long-term business goals and ensure alignment with the Company. Using business acumen and legal skills, this individual will assist Assistant General Counsel in the efficient administration and management of all legal matters. The Corp Counsel’s perspective should always be the advancement of the Company’s interests through the understanding and knowledge of the business strategies and operations, while reducing legal risk to acceptable levels. Essential Functions Provide legal advice, recommendations, oversight and guidance with respect to all legal issues and all areas of law which impact the Company, including, but not limited to, the following: • Commercial Law, • Prepare, draft, and negotiate various contracts for the Company to ensure alignment with the business requirements and organizational policy, • Advise on advertising, intellectual property, trade and anti-trust matters, • Acquisitions / Divestitures / Transfers of wholesale and supermarket assets, • Finance, • Company and subsidiary secured and unsecured financing, • Company loans to member organizations, • Company intercreditor agreements with third party lenders, • Real Estate, • Site Development Committee liaison, • Lease Negotiation, • Lease Interpretation and Administration, • Advise and counsel senior management on material legal issues, • Collaborate with and manage outside counsel to ensure receipt of high-quality, on-budget, cost-effective, timely, practical and business-oriented legal advice, including hiring, budgeting, performance management, and strategic oversight, • Develop thorough understanding of Company's business, products, markets, facilities, customers, and competitors to identify trends and formulate strategies and processes accordingly, • Additional responsibilities as necessary and assigned Qualifications • Minimum 5 years of experience with a top tier law firm and/or in-house legal department, • Law Firm experience a plus, • JD Degree from an ABA accredited law school, • Licensed to practice in New Jersey, • Thrive in a fast-paced, changing environment; prioritize competing demands and consistently meet deadlines, • Apply strong business acumen, legal judgment, and sound problem-solving, • Build and maintain effective partnerships with internal clients and cross-functional stakeholders, • Communicate clearly and persuasively, including strong writing and presentation skills, • Demonstrate strong computer proficiency (Microsoft Office and related tools) Working Conditions & Physical Demands: The physical demands described here are representative of those that must be met by an Associate to successfully perform the essential functions of this job. • Associate will be required to work on-site during Company’s regular business hours for a minimum of four (4) days per week and must adhere to Company’s Hybrid Work Policy., • Associate will be occasionally required to lift and/or move up to 10 pounds., • Associate may occasionally be required to travel to other Company locations., • While performing the duties of this job, Associate will be frequently required to sit, walk and talk and hear. Core Competencies • Communicate Effectively: Communicates thoughts and ideas in a well-organized manner, encouraging two-way communication., • Build Relationships: Creates cross-functional partnerships through the development and maintenance of constructive and cooperative relationships., • Stay Competitive: Demonstrates a mindset of continuous improvement while exhibiting passion and enthusiasm for their work., • Embrace Change: Looks for new ways of working by supporting advancements in processes and technology., • Develop You: Identifies and capitalizes on opportunities for personal and professional career growth., • Drive for Results: Supports divisional and strategic objectives through achievement of work goals.

JOB DESCRIPTION: • Takes incoming phone calls as needed and completes service request forms., • Schedules service technicians to jobs., • Communicate with technicians to facilitate work., • Review service calls in D365 and prepare work orders for closing., • Manages resources in service department to complete work in a timely manner., • Communicates with customers to coordinate services and ensure customer satisfaction., • Manages technicians to meet department and company standards., • Adhere to COD Policy, Credit Approval Process, Engine Warranty Policy and Procedures. RECOMMENDED QUALIFICATIONS: • High School Diploma or equivalent required., • Minimum 3 years experience in the engine, truck or heavy equipment industry with progressive maintenance/repair supervisory experience and/or equivalent combination of training and experience which provides the required knowledge, skills and abilities., • Excellent communication and interpersonal skills; both verbal and written., • Strong time management skills, ability to work independently and multi-task effectively in a fast-paced environment., • Experience with Microsoft Office, Microsoft Excel, Microsoft Word, Microsoft Power Point and other related software. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veteran

SHIFT SCHEDULE: MONDAY-FRIDAY 3:30PM-12:00AM JOB DESCRIPTION: • Manage Shop Technicians and jobs in progress daily., • Establish clear documentation from shift to ensure smooth transition into following shift., • Communicate with CSR's and CSR Manager regarding the daily workload., • Review and work with Service Advisor to maintain daily customer updates in Cat Interact Program., • Review and monitor the daily productivity of the Technicians and weekly expense report., • Review and monitor weekly overtime report., • Model and reinforce safety practices, which are consistent with our mission to ensure employees and customer safety., • Check repair history and open service letters for all jobs prior to starting the job., • Close service calls daily., • Complete warranty checklist, be accountable for accuracy., • Perform weekly shop inspections for assigned areas. List all areas/items requiring attention in app and schedule to be addressed accordingly., • Assure that Technicians are completing their JHA forms, locking and tagging out the machines they are assigned to, wearing all proper PPE, and keeping a clean work area daily., • Perform daily safety observations. RECOMMENDED QUALIFICATIONS: • High School Diploma or equivalent is required., • Minimum 8 years experience in the heavy equipment industry with progressive maintenance/repair supervisory experience and/or equivalent combination of training and experience which provides the required knowledge, skills and abilities., • Excellent communication and interpersonal skills; both verbal and written., • Experience with Microsoft Office, Excel, Word. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

JOB DESCRIPTION: • Manage the day-to-day operations of the Transportation Department, including supervision of dispatching supervisors, drivers, and fleet assets (trucks and trailers)., • Coordinate and oversee all equipment moves supporting Foley Rents, construction division sales, service operations, and heavy rental needs., • Ensure accurate and timely invoicing of all internal and external transportation hauls., • Develop, track, and maintain centralized transportation and trucking KPIs to drive performance and cost control., • Enforce high standards of professionalism, safety, and conduct across all transportation department personnel., • Ensure full compliance with DOT regulations, including Hours of Service, Daily Vehicle Inspection Reports, permitting, and related requirements., • Oversee the ordering, maintenance, utilization, and disposal of the truck and trailer fleet to meet internal and external customer requirements., • Collaborate with internal stakeholders, outside sales representatives, and customers to communicate delivery schedules and transportation timelines., • Provide transportation quotes as needed to support sales efforts and customer inquiries., • Monitor and manage transportation costs, supporting departmental P&L responsibilities., • Perform additional duties as assigned to support evolving business needs and professional development. RECOMMENDED QUALIFICATIONS: • High School Diploma or equivalent required., • Minimum 5-10 years of experience in the service-related industry., • Excellent communication and interpersonal skills; both verbal and written., • Take initiative in problem-solving and continuous improvement, • Prioritizing tasks and meeting deadlines in a fast-paced environment., • Flexibility to adjust to changing priorities and business needs., • Experience with Microsoft Office, Excel, Word. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Job Description At SunnyD, we’re more than an iconic orange drink with a bold, one-of-a-kind taste — we’re a team of people who take pride in making it. Every bottle that rolls off the line at our Dayton, New Jersey plant represents teamwork, precision, and a shared commitment to quality. Here, you’ll find a fast-paced manufacturing environment where your ideas, skills, and reliability truly make a difference. If you’re driven, dependable, and ready to be part of a team that keeps one of America’s most beloved beverages flowing — SunnyD is the place for you. Perks of Being Part of Our Team • Competitive pay starting at $22.06/hour, • Training and Advancement Opportunities – Build your skills, grow your career and earn up to $26/hour as you gain experience, • Competitive medical, dental, and vision benefits, • Employer-paid life insurance, • 401(k) match from Day 1of employment, • 11 paid company holidays, • Safety shoe & prescription safety glasses reimbursement, • Employee discounts through LifeMart, Staples, Skechers, and more, • Employee Assistance Program (EAP) Free, confidential resources to support your personal and professional wellbeing. As a Machine Operator, you’ll play a key role in keeping our production lines running smoothly and efficiently. Your responsibilities will include: • Operating, maintaining, and troubleshooting high-speed filling and packaging equipment to ensure consistent performance., • Setting up and completing changeovers between product runs., • Performing basic preventive maintenance and promptly reporting any mechanical or quality concerns., • Monitoring product quality and line performance to achieve daily production and efficiency goals., • Following all safety procedures and Good Manufacturing Practices (GMPs) to maintain a safe and compliant work environment., • Performing other related tasks assigned to support plant operations. What We’re Looking For • At least one (1) year of experience in manufacturing, production, or similar hands-on work environment (preferred)., • Strong attention to detail and a consistent commitment to producing high-quality results., • A reliable, safety-focused, and team-oriented mindset, with a willingness to learn and support others., • The ability to pass a pre-employment drug screen and physical and be at least 18 years of age., • A high school diploma or equivalent education. Shift • 6:30 am- 5:00 pm Monday- Thursday, • 8:30 pm- 7:00 am Monday- Thursday, • 6:30pm-7:00am on a 2-2-3 schedule, • Ability to stand on hard surfaces such as concrete for extended periods, up to 12 hours per shift., • Lift, carry, and move materials weighing up to 60 pounds as part of daily tasks., • Climb stairs, ladders, and platforms to inspect, operate, maintain, or troubleshoot equipment., • Bend, twist, and kneel as needed to access machinery and perform maintenance or operational duties., • Work in indoor and outdoor environments with varying seasonal temperatures and humidity levels., • Perform effectively in areas with high noise levels while wearing proper personal protective equipment (PPE). Sunny Delight Beverages Company is an Equal Opportunity Employer. All applicants must be authorized to work in the US. Sunny Delight Beverages Company does not offer practical training positions nor sponsor foreign citizens to obtain work visas or permanent residency.

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ Title Operator, Compression & Encapsulation Department Standard Manufacturing Reports to Production Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Compression and Encapsulation Operator is responsible for the operation and set-up of tablet compression machines and set-up of automatic capsule filling machine in accordance with company standard operating procedures (SOPs) and cGMP regulations to ensure products meet applicable quality standards. This position includes set-up, operation, cleaning, and light mechanical adjustments. The Operator is accountable for overall production line performance including safety, quality, shrink, attainment, and line efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility Level 1 • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to identify and report to the team lead or supervisor troubleshoot product issues., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1. tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, 2. general issues such as machine set-up, machine performance, and documentation. • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Assists supervisor in completion of deviation reports that outline both short- and long-term corrective action steps., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1. tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, 2. general issues such as machine set-up, machine performance, and documentation. • Performs basic and routine maintenance activities., • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: Level 1 Pay Rate $19.00 - $23.00 • High school graduate or GED equivalent, • High school graduate or GED equivalent, • High school graduate or GED equivalent, • 5+ years of experience, • Operate all machines., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely to detail and accuracy with numbers., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift - 7:00am to 3:30 pm

Job Description About us! Paragon Staffing, LLC takes the stress and trouble away from finding each individual the right employment opportunity! Apply Today! Job description Shipping & Receiving/ Forklift Operator SUMMARY OF POSITION To keep accurate records to all materials received and inventoried. Inspect shipments, and reconcile packing slips or manifests with actual items, and verify that materials are delivered to correct departments or properly stored in warehouse. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.  Review all incoming items, inspecting them for quality, and ensuring proper paperwork is received.  Enter all raw materials into MAS 500 system, verify entry, and post transactions.  Locate and consolidate received materials to a bin location in the warehouse.  Work closely with other departments to ensure a steady flow of materials needed to meet customer demand.  Move materials, supplies, and finished goods to designated places in the facility, using hand trucks, forklifts, etc.  Use of a handheld scanner to track and locate all materials.  Maintains thorough knowledge of assigned processes and equipment.  Reports any process and equipment problems to the attention of upper management and/or the Maintenance Supervisor.  Responsible for all processes, equipment, employees, safety, and housekeeping of the area and meeting quality and quantity standards.  Recommends measures to improve production methods, equipment performance, and quality of product.  Recognize non-confirming goods and to inform Quality Assurance Manager.  Effective utilization of required systems, including HQMS, Sage 500 ERP/DSCS, and handheld scanners.  Ensures established safety protocol is followed. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. JOB REQUIREMENTS  The ability to maintain computerized inventory system promptly and accurately.  Ability to work effectively with all levels of employees and management. Have a good command of the English language.  Experience operating powered industrial trucks, including forklifts, Order Pickers, Walkies, Trans-Stackers, and Clamp Trucks. Certification is desirable.  Ability to read and interpret work orders for processing.  Ability to use simple math and basic hand help measuring tools.  Strong organizational and planning skills.  High school diploma or equivalency degree. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, light to moderate physical effort is required. Ability to lift or maneuver materials in excess of 45+lbs. Regularly required to stand, reach and move about the facility. WORK ENVIRONMENT This is a fast-paced work environment with consistent pressure to complete duties as outlined above which requires ability to manage multiple projects at a detailed level and provide support to many internal departments in a fast-changing environment. Many duties listed above are time-sensitive and have strict deadlines for completion. Work performed in a Warehouse Manufacturing/Distribution Plant environment. Exposed to any number of elements but with none present to the extent of being disagreeable. Job Type: Full-time Salary: - $20.00 per hour Schedule- First Shift Location : North Brunswick, NJ Language: • English (Required) Work Location: In person Powered by JazzHR B7D5KGWA7a

Job Description Position Overview: This is a hands-on individual contributor production role requiring expertise in multiple manufacturing disciplines, including CNC machining, manual tacking, lamination, engraving, and card finishing. The ideal candidate is a reliable team player who can adapt to different functions as needed to support production goal. Key Responsibilities: • Operate and maintain CNC machines, lamination systems, engraving systems, and/or card finishing equipment to produce high-quality components., • Perform tacking operations with precision and in accordance with production requirements., • Inspect and verify output quality at each stage, ensuring adherence to standards and specifications., • Maintain accurate documentation of production data, process parameters, and quality checks through our ERP input tools or manual documentation., • Flex between functions and workstations based on production demand or team capacity., • Rapidly adapt to changes in workflow, priorities, and scheduling to support production goals., • Collaborate with supervisors and planners to address bottlenecks or resource gaps in our Lead Daily Management solution., • Follow all safety protocols and procedures, maintaining a safe and organized workspace., • Conduct basic troubleshooting and preventative maintenance on equipment., • Report malfunctions or hazards promptly to minimize downtime and risk., • Independently can select program files and adjust offsets according to material thickness Skills & Qualifications • High School Diploma, GED or relevant experience required., • 3+ years of experience in a hands-on manufacturing environment, • Demonstrated expertise in at least one of the following areas: CNC, tacking, lamination, engraving, card finishing., • Strong mechanical aptitude and ability to read technical drawings, blueprints, or CAD files., • Excellent communication, coordination, and interpersonal skills., • Proven ability to adapt to changing priorities and support team flexibility., • Preferred: Familiarity with lean manufacturing and continuous improvement principles., • Preferred: Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking., • Basic knowledge of using measurement tools such as depth gauges, micrometers, and caliper Preferred: • Familiarity with lean manufacturing and continuous improvement principles., • Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description Location: Dayton, NJ Schedule: 6:30 AM – 7:00 PM (2-2-3 rotating schedule) Pay: $34–$36 per hour (starting rate to commensurate with experience) About SunnyD: SunnyD is an orange drink with a unique, boldly original taste that’s unmatched. From our classic Tangy Original to our variety of other flavor blends, each has a one-of-a-kind flavor for a one-of-a-kind you! Why Join Us? • Medical, dental, and vision coverage, • Employer-paid life insurance, • 401(k) with company match (starting Day 1!), • 11 paid company holidays, • Safety shoe and prescription safety glasses reimbursement, • Employee discounts (LifeMart, Staples, Skechers & more), • Employee Assistance Program We are seeking a skilled and motivated Industrial Electrician to support our plant operations. This role is responsible for maintaining and troubleshooting electrical systems, instrumentation, and controls across high-speed bottling and packaging equipment. Key Responsibilities: • Install, maintain, and troubleshoot 480VAC to 24VDC electrical systems and motor control centers, • Troubleshoot and repair process and packaging equipment (fillers, conveyors, packers, palletizers, etc.), • Work with PLCs, HMIs, VFDs, and servo drives to maintain electronic control systems, • Calibrate, inspect, and troubleshoot flow, pressure, level, and temperature instrumentation, • Lead and train other E&I technicians as needed, • Create worker orders in our maintenance system, • Troubleshoot, photo eyes and proximity sensors, • 3+ years of hands-on experience as an industrial electrician, • 1–2 years in a high-speed production environment (food/beverage or bottling preferred), • Formal E&I training from vocational school, military, or certification program preferred, • Understanding of 480VAC power distribution systems and NEC code, • Skilled in using electrical tools (megger, amp/volt meters, conduit benders, etc.), • Solid troubleshooting skills across electrical, mechanical, and instrumentation systems, • Experience with PLCs and industrial controls (Allen-Bradley, ControlLogix, SLC-500, DeviceNet, Ethernet/IP) (preferred), • Familiarity with VFDs and servo systems (PowerFlex, SEW, Pacific Scientific, Rockwell) The role requires the ability to: • Stand on hard surfaces such as concrete for extended periods, up to 12 hours per shift, • Lift and carry materials weighing up to 60 pounds, • Climb stairs, ladders, platforms, and other structures on equipment or buildings to inspect, operate, maintain, or troubleshoot, • Bend at the knees, twist the back, and kneel as needed to access equipment for operation, maintenance, or troubleshooting, • Work indoors and outdoors in varying seasonal temperatures and humidity levels

Job Description Position Overview: This is a hands-on individual contributor production role requiring expertise in multiple manufacturing disciplines, including CNC machining, manual tacking, lamination, engraving, and card finishing. The ideal candidate is a reliable team player who can adapt to different functions as needed to support production goal. Key Responsibilities: • Operate and maintain CNC machines, lamination systems, engraving systems, and/or card finishing equipment to produce high-quality components., • Perform tacking operations with precision and in accordance with production requirements., • Inspect and verify output quality at each stage, ensuring adherence to standards and specifications., • Maintain accurate documentation of production data, process parameters, and quality checks through our ERP input tools or manual documentation., • Flex between functions and workstations based on production demand or team capacity., • Rapidly adapt to changes in workflow, priorities, and scheduling to support production goals., • Collaborate with supervisors and planners to address bottlenecks or resource gaps in our Lead Daily Management solution., • Follow all safety protocols and procedures, maintaining a safe and organized workspace., • Conduct basic troubleshooting and preventative maintenance on equipment., • Report malfunctions or hazards promptly to minimize downtime and risk. Skills & Qualifications • High School Diploma, GED or relevant experience required., • 3+ years of experience in a hands-on manufacturing environment, • Demonstrated expertise in at least one of the following areas: CNC, tacking, lamination, engraving, card finishing., • Strong mechanical aptitude and ability to read technical drawings, blueprints, or CAD files., • Excellent communication, coordination, and interpersonal skills., • Proven ability to adapt to changing priorities and support team flexibility., • Preferred: Familiarity with lean manufacturing and continuous improvement principles., • Preferred: Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking. Preferred: • Familiarity with lean manufacturing and continuous improvement principles., • Understanding of ISO or other quality management systems., • Basic computer literacy for equipment interfaces, reporting, and tracking. About CompoSecure CompoSecure, a GPGI business (NYSE: GPGI), is the leading manufacturer of Premium Metal Payment Cards and also offers best-in-class Authentication and Digital Asset solutions. The Company's offerings combine elegance, simplicity, and security to deliver exceptional experiences and peace of mind, enabling trust for millions of people around the globe. For more information, please visit and . We offer a comprehensive benefits package designed to support your health, financial well-being, and work-life balance, including medical, prescription, dental, and vision coverage; FSA/HSA options; company-paid life and disability insurance; 401(k) with company match; paid time off (PTO) and holidays; annual bonus opportunities; an employee assistance program (EAP); and opportunities for career growth and advancement. Additional details will be provided during the hiring process. CompoSecure is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. We are also an equal opportunity employer of individuals with disabilities and protected veterans. Please note: CompoSecure does not accept unsolicited resumes from staffing agencies or third-party recruiters. Any unsolicited resumes sent to CompoSecure, including to our employees, will become the property of CompoSecure and may be used without any obligation to pay referral or placement fees. Any agency or recruiter seeking to work with CompoSecure's Talent Acquisition Team should contact our team directly by sending an email to .

Job Description Job Description Date 06/2025 Location 1300 Airport Road, North Brunswick NJ Title Operator, Granulation/ Blending Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Granulation/Blending Operator is responsible for the operation and set up of granulators, drying oven, blenders, screening equipment etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Train in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Rapid Mixer Granulator: 100L & 600L and planetary mixer, • Fluid bed dryer/processor, • Tray Drying Ovens, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screening/ sieving equipment, • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime. Education & Qualification: Level 1 Pay Rate $19.00 - $22.00 • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 6-12 months experience, • Operates blending, screening & milling machines., • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 1 years of experience, • Operates 5 machines (blending, milling, sifting, tray dryer and granulation)., • A clear understanding of the principal functions of the blending /granulation department. Certified forklift operator., • High school graduate or GED equivalent, • 3+ years of experience, • Operate all machines., • Must be highly skilled in the proper set up an operation of blenders and granulators., • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand the inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. 1st shift - 7:00am to 3:30 pm

Job Description Date 11/2020 Location 1300 Airport Road, North Brunswick NJ Title Operator, Granulation/ Blending Operator 1 Department Standard Manufacturing Reports to Production, Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Granulation/Blending Operator is responsible for the operation and set up of granulators, drying oven, blenders, screening equipment etc. in accordance with company standard operating procedures. The position includes set up, operation, cleaning, and preventative maintenance of all related equipment. The Operator is accountable for overall performance including safety, quality, shrink, attainment, and production efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Follow batch records, SOP’s, and cGMP's guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Complete all labeling and inventory movements to ensure accurate inventory control., • Dismantle and clean any accessories and equipment while also maintaining a clean work area., • Train in the operation, cleaning and set-up of the following pieces of equipment as well as new equipment:, • Rapid Mixer Granulator: 100L & 600L and planetary mixer, • Fluid bed dryer/processor, • Tray Drying Ovens, • Fitz mill/Multi mill, • Double cone/V- blenders: 6cu. ft. to 150 cu. ft., • Screening/ sieving equipment, • Fill in appropriate logbooks for equipment and rooms., • Perform all material handling of products and components., • Correctly document all steps on batch record., • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per company policies., • Works extended hours and occasional weekend overtime. Education & Qualification: • High school graduate or GED equivalent, • 3+ years Granulating/Blending Operator experience, • Minimum of one (1) year work experience in nutritionals, supplements, food, or pharmaceutical manufacturing industries, • 6-12 months experience, • Operates blending, screening & milling machines., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. 2nd sift - 3:00 pm to 11:30 pm

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description JOB DETAILS Base Pay $20.00 2nd Shift: 3pm-11:30pm Monday-Friday DUTIES AND RESPONSIBILITIES Under limited supervision, the Extruder Operator will be expected to operate extrusion machines in a work cell to produce required parts in accordance with customer requirements and the production schedule. Clearly understands and has demonstrated strong capability in setting up, starting, running, and tearing down any profile tooling in a safe and productive manner. Troubleshoot extrusion issues within a work cell. • Operates extrusion machines in a work cell to produce required parts as determined by customer requirements and the production schedule, • Analyze production data and make necessary adjustments to machine operations within the work cell., • Complete necessary documentation; process checks, quality checks, production reporting, etc., • Evaluate part conformance against documented engineering requirements., • Set up and start up any profile for any machine model in a work cell, • Troubleshot advanced problems against a defined process and escalates problems to appropriate support roles: ie, Technicians and Engineering, • Train new Extruder Operators, • Identify and communicate appropriately when electrical/mechanical/technical support is needed, • Participate and sustain 5S activities, • Work safely and follow safety and process policies., • Make sure co-workers are working safely and following safety policies, • Participate in & lead kaizen events and sustain improvements made from those events, • Lead work cell when needed, • Perform basic maintenance tasks as necessary, • Attend and participate in appropriate training and development programs., • Perform other duties across the plant as needed, directed by supervision or managementQualifications, • High School Diploma or equivalent preferred, • Basic computer skills – Windows & keyboarding, • Equipment operation experience, • Be able to lift at least 50 pounds, • Developing leadership skills, • Master all skills and knowledge while working as an Extruder Operator, • Developing strong process and equipment troubleshooting capabilities, • Ability to articulate problems and solutions verbally, • Ability to read and comprehend written instructions and process procedures, • Ability and skills to collaborate effectively in a team environment Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description While we may not have an immediate opening for this role, we welcome your interest and can contact you when a job is available. Hours/Shift: • Hours/Shift: 1st Shift from 6:00am – 2:30pm As a Machine Operator, you will perform skilled work in the setup, operation, basic maintenance and repair of manufacturing and/or packaging equipment to safely and effectively produce Temperature Control Packaging and related goods as per quality policy and manufacturing Procedures. • Setup and operate manufacturing and/or packaging equipment., • Load and feed machinery with specified raw materials and parts., • Perform basic repairs and maintenance as needed during production hours and coordinates with Maintenance Mechanic to perform advanced troubleshooting and preventive maintenance., • Refer to work order package and procedural instructions for each assignment before commencing work., • Assure all work assigned is performed in accordance with specifications, instructions, and requirements., • Assist in the performance of a variety of manual labor related to production including but not limited to handling, repeated handling, push, pull, lift, assembly, loading and unloading, packing, and palletization of goods., • Perform assignments in accordance with established safety policies and procedures., • Perform any specified quality assurance checks designated for each assignment adhering to quality policies., • Record specified production information thoroughly and accurately in work order package., • Meet production standards within a reasonable time depending on the degree of difficulty of the designated assignment., • High School Diploma or GED equivalent desired, • Bilingual (English & Spanish), • 1+ years’ experience in a manufacturing environment, • Ability to read and understand product specifications, • Forklift experience., • Ability to lift 50-75 lbs., • Ability to perform basic mathematical operations., • Ability to bend, reach, kneel, and stand for extended period of time., • Good multitasking and prioritization skills., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Ability to work in a team environment., • Good time management skills. We strive to offer a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Voluntary Accident, Critical Illness, and Hospital Indemnity Insurance, • Voluntary Life and AD&D, • Short-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is our policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job DescriptionIndustrial Maintenance ElectricianLocation: 1 Chris Court, Dayton, NJ 08810 Work Hours: 6:00 AM to 4:30 PM, Monday through Thursday Pay Range: $25 to $35 per hour Make the Right Connection—Build Your Career with Dixon! Richmond Foundry is looking for an Industrial Maintenance Electrician to be the backbone of our high-tech foundry in Dayton, NJ! This dual-threat role is critical for minimizing downtime and maximizing production. You will be responsible for the rapid diagnosis and repair of complex electrical systems (PLCs, VFDs, motors) and mechanical equipment (hydraulics, gearboxes, conveyors). Your proactive maintenance expertise is essential. We need a safety-minded professional committed to LOTO and operational excellence. If you thrive on technical challenge and want your skills to directly power success, apply now! Who We Are: Richmond Foundry, LLC, an affiliate of The Dixon Group is a leading producer of high-quality metal castings. We are committed to safety, excellence, and innovation. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation’s heroes. Veterans are strongly encouraged to apply. What You'll Do: • Install, troubleshoot, repair, and maintain electrical systems, motors, and control panels, • Perform mechanical repairs on plant equipment, conveyors, and machinery, • Conduct routine inspections and preventative maintenance, • Read and interpret electrical and mechanical diagrams and schematics, • Ensure compliance with safety regulations and company policies, • High school diploma required, • Technical training or additional education preferred, • Electrical troubleshooting and repair experience is a must., • Proven experience as an industrial electrician and mechanic, ideally in a foundry or manufacturing environment, • Strong knowledge of electrical codes, and mechanical systems, • Extensive understanding of three-phase electrical systems and control theory, • Ability to read blueprints, schematics, and technical manual, • Troubleshooting and problem-solving skills, • Ability to work independently and as part of a team, • Certification or licensing as an electrician is preferred, • Forklift Certification is preferred, • Ability to lift heavy equipment and parts, • Standing, bending, and climbing for extended periods, • Medical, dental, and vision insurance for you and your family, • Competitive salary, • Bonus programs, • 401K retirement plan, • Training opportunities, • Tuition reimbursement, • Paid vacation, PTO, and holidays The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.)

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description JOB DETAILS Base pay starts at $20 per hour 1st Shift: 7AM-3:30PM Monday-Friday DUTIES AND RESPONSIBILITIES Under limited supervision, the Extruder Operator will be expected to tend to and operate extrusion machines in a work cell to produce required parts as determined by customer requirements and the production schedule. Clearly understands and has demonstrated strong capability with set-ups, start-ups, running and tearing down any profile tooling in a safe and productive manner. Troubleshoot extrusion issues within a work cell. • Tend to and operate extrusion machines in a work cell to produce required parts as determined by customer requirements and the production schedule, • Analyze production data and make necessary adjustments to operation of machines within the work cell, • Move materials in and out of the line as needed; including packaging materials, raw materials, and finished product, • Complete necessary documentation; process checks, quality checks, production reporting, etc., • Create labels and wrap loads per standard work. Fill in for lead in signing off loads, • Evaluate part conformance against documented product requirements and stack profiles on load, • Set-up and start-up any profile for all machines in a work cell, • Trouble-shoot advanced problems against a defined process and refer complex problems to appropriate support functions; ie – Technicians and Engineering, • Train new Extruder Operators, • Identify and communicate appropriately when electrical/mechanical/technical support is needed, • Participate and sustain 5S activities, • Work in a safe manner and follow safety policies. Make sure co-workers are working safely and following safety policies, • Participate in & lead kaizen events and sustain improvements made from those events, • Lead work cell when needed, • Perform maintenance tasks as necessary, • Attend and participate in appropriate training and development programs., • Perform other duties across the plant as needed as directed by supervision or managementQualifications, • High School Diploma or equivalent preferred, • Basic computer skills – keyboarding, Windows, • Master all skills and knowledge while working as an Extruder Operator, • Developing strong process and equipment troubleshooting capabilities, • Equipment maintenance experience, • Developing leadership skills, • Ability to articulate problems and solutions verbally, • Ability to read and comprehend written instructions and process procedures, • Ability and skills to collaborate effectively in a team environment Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description Date 05/2018 Location 1300 Airport Road, North Brunswick NJ Title Operator, Compression & Encapsulation Department Standard Manufacturing Reports to Production Supervisor FLSA (Exempt or Non-Exempt Non-Exempt Role Overview The Compression and Encapsulation Operator is responsible for the operation and set-up of tablet compression machines and set-up of automatic capsule filling machine in accordance with company standard operating procedures (SOPs) and cGMP regulations to ensure products meet applicable quality standards. This position includes set-up, operation, cleaning, and light mechanical adjustments. The Operator is accountable for overall production line performance including safety, quality, shrink, attainment, and line efficiency. Operators must be capable of operating multiple like machines at one time and learning to operate a variety of equipment within the manufacturing area. Areas of Responsibility • Makes necessary machine adjustments to ensure the smooth operation of the lines for required quality and quantity., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOP’s at all times. Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Ensures that product meets applicable quality standards. This includes inspection for quality during operation and performing all required sampling and testing., • Assists supervisor in completion of deviation reports that outline both short- and long-term corrective action steps., • Utilizes problem-solving skills to investigate and troubleshoot product issues and recommend solutions for: 1. tableting issues such as sticking and picking, capping, chipping, compressibility, delamination, disintegration, and black spots on surface, 2. general issues such as machine set-up, machine performance, and documentation. • Performs basic and routine maintenance activities., • Cross-trains in other areas to be able to support the manufacturing process as needed., • Disassembles, cleans/ sanitizes, and reassembles all required equipment., • Meets all safety expectations and follows all safety practices., • Maintains proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Must be able to work extended work hours and weekend overtime., • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements. Education & Qualification: • High school graduate or GED equivalent, • 3+ years Compression & Encapsulation experience, • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely to detail and accuracy with numbers., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on the floor to clean under the equipment., • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents. 2nd shift - 3:00 pm to 11:30 pm

Job DescriptionOverview We are seeking a dedicated and skilled Forklift Driver to join our team in Dayton, NJ, 08810. In this role, you will play a crucial part in our operations by efficiently moving and managing materials within our facility. If you have a passion for safety and a knack for logistics, we want to hear from you! Responsibilities • Operate forklifts and other material handling equipment safely and efficiently., • Load and unload materials from trucks and storage areas., • Transport materials to designated areas within the facility., • Conduct routine inspections and maintenance on forklifts., • Adhere to safety protocols and guidelines at all times., • Maintain accurate records of inventory and materials handled., • Collaborate with team members to ensure smooth operations., • Assist in organizing and maintaining the warehouse layout. Qualifications, • High school diploma or equivalent., • Valid forklift operator certification., • Proven experience operating forklifts in a warehouse or industrial setting., • Strong attention to detail and commitment to safety., • Ability to lift heavy objects and perform physical tasks., • Good communication and teamwork skills., • OSHA 10-Hour Certification (OSHA 10), • Shipping/Receiving, • Warehouse Experience, • Material Handler Experience, • Distribution Experience, • Loading and Unloading Vehicles, • Packaging Experience, • Meets Physical Requirements, • High School / GED, • Shop Math Skills, • Experience in a Manufacturing Environment, • Sit-Down Forklift (Crown, Raymond), • Reach Forklift (Crown, Raymond), • Pacer (Stand-Up Counterbalance Forklift) (Crown), • Forklifts (Raymond, Crown)

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description Base Pay: $20.00 Shift: 3:00 PM - 11:30 PM Monday-Friday (Please apply with updated resume to considered) DUTIES AND RESPONSIBILITIES Operates forklift to receive, deliver, and otherwise move materials between and throughout our manufacturing plant in North Brunswick, New Jersey. The primary tasks are to receive orders from assembly lines and deliver requested materials, and to use a forklift to unload truckloads and move materials around the facility, including metal bins, cardboard gaylords, and scrap and waste generated in the 2nd shift. Also, must assist in setting our floor for proper motion, along with supporting the inventory periods of record • Load and unload incoming and outgoing shipments in accordance with safety protocols, • Verify and process incoming shipments against purchase orders and packing slips, • Prepare outbound shipments by properly packaging, labeling, and documenting materials, • Operate material-handling equipment, including forklifts, pallet jacks, and hand trucks., • Organize storage areas to ensure efficient space utilization., • Moves PVC scrap materials from the staging area into the grinder, • Moves full lineal bins from the fabrication to the warehouse staging area, • Supports production lines: from the start of the shift to the end of the shift (Handover)., • Receives order lists, incoming radio calls, or in-person requests for PVC materials, • Must prioritize orders and determine the sequence of delivery, • Must identify when to stop one task and begin another based on production needs, • Report any discrepancies or damages to the supervisor, • Assist with general warehouse maintenance, organization, and inventory, • Follow all safety procedures and maintain a clean, organized work environment, • Must be able to safely and effectively operate the forklift, using both hands and feet, as well as visual and auditory sensesQualifications Experience: 2-3 years of operating forklift experience Knowledge: • High School Diploma or General Educational Development (GED) certification is mandatory, • Ability to read, write, and speak simple English as appropriate to a manufacturing environment, • Ability to lift up to 50 pounds on a continual basis above shoulder height and below the waist, • Must be able to read production tags, production paperwork, safety warning labels, and signs, • Must be able to verbally communicate with coworkers, leads, and supervisor regarding the production process and safety-related information, • Ability to perform basic addition, subtraction, multiplication, and division calculations., • Apply commonsense understanding to carry out instructions in written, oral, physically demonstrated, or diagrammed form, • Ability to prioritize work tasks according to production requirements., • Knowledge of all safety practices and procedures established by OSHA, • Broad knowledge of production line mapping, products, and procedures. Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. You can also join one of our Employee Resource Groups which help support our commitment to providing a diverse and inclusive work environment. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description Continue our bakery legacy & tradition: Join Europastry! At Europastry, being part of our team means more than just having a job - it means becoming a Baker in spirit, someone who carries forward a legacy of craftsmanship while boldly shaping the future of food innovation. For nearly four decades, we've honored our origins while reinventing ourselves every day. With a presence in over 80 countries and nearly 5,000 Bakers worldwide, we lead the frozen bakery dough market by combining tradition, talent, and technology. We're #Brave #Agile #Keen #Engaged We are Bakers. And you?About the Role We're looking for a skilled and safety-conscious Forklift Operator to join our team! In this role, you'll operate up to three types of battery-powered equipment, each categorized by size and complexity (FLO1–FLO4). You'll receive comprehensive training and certification for each level, ensuring you're set up for success. This is a hands-on position ideal for someone who enjoys working in a fast-paced environment, values safety, and takes pride in keeping operations running smoothly. Key Responsibilities As a Forklift Operator, you'll play a critical role in our warehouse operations by: • Safely operate forklifts and other lifting equipment (e.g., fork grapple, lamps, elevating platforms) to move, stack, tier, and transport materials., • Load and unload trailers, supply route drivers, and transport stock from production areas to freezers., • Position lifting devices under/around pallets, skids, boxes, and other materials to move them to designated areas., • Recharge batteries and inspect equipment before and after use., • Report equipment issues to maintenance concerns to shift supervisors., • High school diploma or GED minimum, individuals with food manufacturing, logistics and industrial experience welcomed to apply., • 1–3 years of forklift experience (or equivalent combination of education and experience)., • Familiarity with GMP regulations, OSHA standards, and lock-out/tag-out procedures., • Working knowledge of SQF code and food safety practices (training provided)., • Comfortable working in cold environments and around mechanical equipment., • Valid driver's license., • People-first culture with a strong focus on safety and teamwork, • Growth opportunities and leadership development as a company we enjoy watching our bakers' growth., • Inclusive environment where your ideas matter At Europastry, we're committed to building a diverse and inclusive team. If you're a proactive, safety-minded technician who thrives in a fast-paced environment, we want to hear from you! Are you the new Baker joining the team? Click Apply Now to join our growing team.

YOUR ROLE Responsible for managing the CEVA physical security program in an assigned region. Reviews all physical security requests and evaluates requests based on CEVA security, customer, government, regulatory, and industry standards. Ensures physical security related expenditures remain within budgetary expectations. Provides leadership and oversight to physical security projects in coordination and collaboration with relevant business partners. WHAT ARE YOU GOING TO DO? • Lead the oversight, management and integration of CEVA physical security guidelines and procedures at all assigned regional locations to ensure effective maintenance of security standards and compliance with regulatory guidelines., • Provide leadership and guidance to assigned Regional Security Managers., • Ensure all CEVA guidelines for procurement are followed., • Receive all operational physical security requests, review requests based on requirements of CEVA, customer, government, regulatory, and industry standards., • Lead physical security projects within assigned region to ensure they are completed on schedule and within budget., • Review and audit guard coverage invoicing for assigned region. Identify, investigate, and resolve any billing discrepancies., • Establish and maintain cooperative working relationships with local, state and federal law enforcement and other related government agencies., • Review proposed customer security requirements and indicate any areas of non-compliance with appropriate CEVA business partners., • Engage with CEVA Business Development to ensure new awarded customer security requirements are implemented as directed by contractual obligations and meet CEVA Security Standards., • Engage with CEVA Security Investigations to ensure all investigative matters are coordinated with all relevant business partners., • Evaluate and implement new technology that improves the overall CEVA security infrastructure while reducing costs., • Conduct security audits as necessary and in compliance with the CEVA Security audit policy., • Perform on-site security assessments in coordination with site leadership to identify potential areas of vulnerability and mitigation actions., • Work collaboratively with operational site leadership to resolve issues and improve overall security effectiveness., • Establish and maintain a rapport with CEVA customer security departments., • Ensure surveillance systems, security systems and alarms in field locations are maintained and operational., • Familiarity with emerging technology changes and innovations through formal or informal research and/or participation in professional organizations., • Perform other duties as assigned. WHAT ARE WE LOOKING FOR? Education and Experience: • High School Degree or GED required., • Bachelor’s degree in Safety, Security, Criminal Justice, Project Management, Construction Management or a related field preferred; or, combination of education and work experience in a similar role., • Minimum of seven years' experience in corporate security or similar role., • Minimum of five years' experience in a management or leadership role., • Certifications and Licenses, • CPP (Certified Protection Professional) preferred. Skills: • Must be able to read, write and speak English fluently., • Ability to communicate and interact effectively with multi-functional and diverse backgrounds., • Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations., • Ability to write reports, business correspondence, and procedure manuals., • Ability to effectively present information and respond to questions from management, employees and vendors., • Intermediate proficiency in Microsoft Office, internet, web-based and job related specific software applications including security reporting database software., • Knowledgeable and experienced with physical security, security principals, investigative processes, report preparation and interviewing., • In-depth knowledge of supply chain security and the deployment of security policy across tiered partners., • Ability to effectively communicate security related concepts to a broad range of technical and non-technical staff., • Experience with, or ability to understand internal and external implications of solutions proposed, potential areas of risk and methods to limit liabilities., • Experienced in managing cooperative working relationships with local, state and federal law enforcement and other related government agencies., • Ability to establish and manage vendor relationships in collaboration with other CEVA business partners., • Excellent planning, time management, collaboration, decision making, organization, presentation and negotiating skills., • Knowledgeable in the principles of project management, quality assurance and contract service delivery., • Ability to handle sensitive and/or confidential documents and information., • Demonstrated success in leading, supervising, managing and developing individuals and high-performance teams., • Ability to manage the financial aspects of the department including purchasing, budget preparation and review, financial reporting and monitoring expenses. WHAT DO WE HAVE TO OFFER? With a genuine culture of recognition, we want our employees to grow, develop and be part of our journey. We offer a competitive benefits package We are a team in every sense, and we support each other and work collaboratively to achieve our goals together. It is our goal that you will be compensated for your hard work and commitment, so if you’d like to work for one of the top Logistics providers in the world then let’s work together to help you find your new role. ABOUT TOMORROW We value your professional and personal growth. That’s why we share plenty of career opportunities for you to thrive within CEVA. This role can be the first step on your career path with us. You can stay in the same job family, find a new family to grow in (an almost limitless number of options) or find your own path. Join CEVA for a challenging and rewarding career.

Job Description An international plant-based food manufacturing company is seeking an entry-level Maintenance Clerk. • $20 -23 /hr. plus full benefits, • Monday – Friday 08:00 a.m. – 05:00 p.m., • Somerset, NJ, • High school diploma or HVAC school training with at least 1 year of experience in a manufacturing environment required Requirements of the Entry-level Maintenance Clerk: • High school diploma or HVAC school training with at least 1 year of manufacturing experience, • Proficient with Microsoft Office and related software, • Strong verbal and written communication skills, • Basic maintenance knowledge and understanding of safety rules, • Mechanical aptitude with ability to troubleshoot equipment, • Able to lift up to 50 lbs Responsibilities of the Entry-level Maintenance Clerk: To support maintenance operations, including scheduling repairs, coordinating staff, communicating with vendors, and ensuring safety compliance. • Get quotes for parts/services and process POs and payments, • Keep accurate records of maintenance work and equipment history, • Verify and organize incoming parts and materials, • Monitor and restock maintenance inventory, • Maintain organized parts storage systems, • Do facility walkthroughs to collect basic operational data, • Enter and update maintenance data; prepare simple reports, • Support time and attendance tracking for maintenance staff, • Maintain inspection, service, and contract documents, • Coordinate with vendors and contractors for repairs, • Ensure maintenance activities follow safety rules, • Communicate effectively with technicians, managers, and vendors, • Identify and support process improvements, • Perform other assigned duties Employment Type: Direct Hire Schedule: Monday – Friday 08:00 a.m. – 05:00 p.m. Maintenance coordinator, Maintenance admin assistant, facility coordinator, facility admin assistant, Maintenance Clerk, Maintenance Planner, Maintenance Scheduler Company DescriptionTriCom Quest is a full-service employment agency serving the greater Los Angeles area. We partner with a wide range of industries, with a special focus on international companies, helping fill roles from entry level to executive leadership. Our mission is to connect employers with the right talent—and to help job seekers find positions where they can thrive and grow.TriCom Quest is a full-service employment agency serving the greater Los Angeles area. We partner with a wide range of industries, with a special focus on international companies, helping fill roles from entry level to executive leadership. Our mission is to connect employers with the right talent—and to help job seekers find positions where they can thrive and grow.

Job Description Overview Role: Laundry Worker Join Healthcare Services Group (HCSG) as a Laundry Worker, where you will play a crucial role in maintaining the cleanliness and availability of linens and garments in a long-term care facility. At HCSG, we are passionate about positively impacting the communities we serve. If you share our commitment to excellence and enhancing customer and resident experiences, join us and make a difference! Responsibilities • Collect, sort, wash, dry, fold, and distribute linens and personal clothing., • Operate laundry equipment safely and efficiently., • Maintain records of laundry activities and report any maintenance or safety issues to the supervisor., • Follow infection control and universal precautions policies to ensure a sanitary environment., • Interact positively with residents, staff, and guests, providing excellent customer service., • All other duties as assigned. Qualifications • High school diploma or equivalent preferred., • Previous laundry experience is preferred but not required., • Maintain a positive attitude and effectively communicate with building occupants, administration, and HCSG leadership to perform daily tasks., • Compliance with COVID-19 vaccination policies, • Must be able to lift/carry a maximum of 50 pounds, push/pull a maximum of 50 pounds, stand, sit, bend and walk for extended periods., • Must be able to work around cleaning products., • Able to follow oral and written instructions, and perform routine, repetitive tasks daily., • Residency within the service area required Ready to Join Us? If you're looking for a role where you can contribute to a clean and welcoming environment and be part of a supportive and dedicated team, apply now and start making a difference at HCSG!

Job DescriptionDescription: Summary: Looking for an experienced Electro – mechanic who is eager to learn and grow with Eastern Metal Framing’s fast paced environment. ESSENTIAL DUTIES AND RESPONSIBILITIES · Complete repairs to all machinery, facilities, and utilities per work order request · Prepare and coordinate completion of work orders for regular maintenance and PM of machines, facilities and utilities · Perform all work in a manner consistent with established safety procedures · Perform Preventative maintenance to Electrical / Mechanical functions. · Able to effectively troubleshoot electrical and mechanical failures · Make recommendations for spare parts and notify when items need to be restocked. Requirements: REQUIRMENTS · An in-depth knowledge of electrical, hydraulic, pneumatic, and mechanical processes. · Is familiar with AC-DC-PLC, Motors, Systems. · Ability to read and work from prints, both mechanical, and electrical. · Has the knowledge and skill to use a variety of hand tools and power tools as well as shop tools · Willing to work overtime for emergencies as needed. QUALIFICATIONS · High school diploma or equivalent trade school diploma · 5 years of experience in industrial Maintenance (steel industry preferred)

Recommended Experience: 1-3 Years Job Type: Full Time Hourly Rate: $40-$43 Job Description TMS International, the leading provider of on-site, industrial steel mill services for steelmakers around the world. At TMS, our people, services, technology and equipment provide invaluable resources that support and enhance our partners' entire manufacturing operations. Our services help lessen steelmakers' environmental impacts and contribute to a cleaner environment. The secret to our success is the expertise of our people and our commitment to unrivaled service. We hire the best people for the job, equip them with what they need, and empower them to do whatever it takes to get the job done right, including making decisions on the spot to create immediate value for our partners We are looking for a Heavy Equipment Mechanic at our Sayreville, NJ location. Heavy Equipment Mechanic Key Responsibilities: • Perform routine maintenance and inspections on heavy equipment to identify potential issues., • Diagnose mechanical, electrical, and hydraulic problems and propose effective solutions., • Conduct repairs and overhaul components as necessary to ensure equipment reliability., • Test machinery and equipment to ensure proper functionality and performance., • Maintain accurate records of maintenance and repair work completed., • Adhere to company safety protocols and procedures at all times., • Proven experience as a heavy equipment mechanic or similar role, preferably in the construction or heavy equipment industry., • Strong understanding of diesel engines, hydraulic systems, and electrical systems., • Proficiency in diagnostic tools and equipment preferred., • Ability to read and interpret equipment manuals, schematics, and technical drawings., • Excellent problem-solving skills and attention to detail., • Good communication and interpersonal skills., • Certification from a vocational school or completion of an apprenticeship program is an asset., • $40.00-$43.00 per hour based on experience, • Medical Insurance, • Paid Time Off and Holidays Job Type: Full-time Benefits: • 401(k), • Health insurance, • Dental, • Vision, • Life insurance, • Day shift Application Question(s):

Job Title Returns Lead Job Overview Responsibilities of the Returns Lead include: • Understand all inbound Returns Dock processes including but not limited to:, • REF Inspect process, • RTV Bedding process, • Yard Maintenance process, • Material Handling standards, • STO process, • Communicate with Yard Staff regarding trailer needs and movements and assess quality/safety of return trailer loading, • Maintain media file storage for follow-up, • Complete returns dock administrative duties:, • Enter and maintain trailer/trailer quality information in SharePoint; load bar/load strap inventory reporting; chair box return/condition of boxes; accuracy of depot reporting; transfer of information fromGuard Staff/Yard Staff to SharePoint, • Enter trailer status (Processed, Not Yet Arrived, To Be Unloaded), • Correct any trailer discrepancy information received from other sources, • Understand all staging areas and disposition codes to ensure that staff is following processes established for the staging of returning product, • Support and facilitate training (and cross training) of all employees, • Coordinate with other Operations Departments to identify and isolate special merchandise on trailers as needed for customer issue resolution, QC or reporting, • Communicate with Returns management staff to identify issues, recognize trends and patterns in Operations process, and work with Returns Management/Returns QC to develop improvements, • Coordinate with Returns Operations staff to ensure all merchandise is in clean condition and dock/floor space is utilized efficiently and safely, • Decision Making Responsibilities:, • All decision-making responsibilities are under the direct supervision of the Returns Supervisor. Work is performed within standard policies and procedures with some opportunity for un-reviewed decision making, • All other duties as assigned What You'll Bring to Bob's At Bob's Discount Furniture, we value the unique skills and experiences that each candidate brings. Success in this role is driven by a combination of technical expertise, problem-solving abilities, behavioral and leadership skills, and customer focus. If you thrive in a dynamic environment and enjoy leveraging your skills to make an impact, this is the perfect opportunity for you! Key Skills for Success To excel in this role, you will need to demonstrate strengths in the following skill areas: Core Competencies & Expertise • Knowledge and understanding of distribution center and warehouse operations., • Strong leadership skills and capabilities., • Skilled at multi-tasking and managing competing priorities., • Working knowledge of Word, Excel, SAP and Red Prairie., • Strong attention to detail and ability to recognize trends or patterns in productivity data., • Ability to communicate proactively and effectively including comprehending and communicating detailed instructions, reading and writing, and having knowledge of commonly used concepts, practices, and procedures as required by the position. Who We Are At Bob's, we have fun, we love what we do, and we're growing fast! As one of the leading omni-channel furniture retailers in the country with over 200 stores, we're committed to creating a workplace that values skills-based hiring, diverse perspectives, and an inclusive culture where everyone can thrive. How We Will Support Your Success We know you have many choices when it comes to your career. At Bob's, we invest in your growth, well-being, and career advancement. Compensation • Starting hourly pay at $21.00 - $24.00/hour (Based on experience) Benefits & Perks • Competitive Medical, Dental, and Vision Insurance, • Generous paid time off, including vacation, personal days, sick leave, holidays, and your birthday!, • 401(k) Profit Sharing Plan with a generous company match, • Pet Insurance and employer-paid Life Insurance options, • Professional Development: Tuition reimbursement, on-demand learning, and career progression pathways, • Employee Discount starting on Day 1, plus exclusive partner discounts, • And so much more! Our Culture & Core Values At Bob's, we believe in fostering a positive, inclusive, and skill-driven work environment. Our core values-Honesty, Integrity, Transparency, Community, Safety, Diversity, Accountability, and Fun-guide everything we do. We're not just a workplace; we're a team that supports and celebrates each other! Minimum Qualifications • High School diploma or equivalent work experience., • 3+ years of warehouse experience including leadership experience in a warehouse environment., • Skilled at multi-tasking and managing competing priorities., • Working knowledge of Word, Excel, SAP and Red Prairie., • Detail oriented and accurate., • Demonstrated ability to quickly recognize and diagnose trend and patterns in productivity data., • Must be able to work flexible hours determined by the needs of the department including weekends and evenings., • Ability to communicate proactively and effectively including comprehending and communicating detailed instructions, reading and writing, and having knowledge of commonly used concepts, practices, and procedures as required by the position., • Must be at least 18 years old to be considered for employment with Bob's Physical Demands • Able to sit, walk, stand, bend, stoop, kneel, reach, twist, push, pull, climb, balance, crouch, push and handle and move items weighing up to 50 lbs without assistance., • Ability to move throughout all areas of the distribution center., • Move objects up to 250 lbs. with or without reasonable accommodations, • Stand and walk continuously to perform job functions., • Standing, walking, lifting, and arranging product: 90%, • Sitting: 5%, • Desk or phone work: 5% Diversity is a Core Value at Bob's At Bob's Discount Furniture, we want you to feel at home. Whether you're shopping with us or a part of the Bob's team, we want you to know that you are valued, appreciated, and free to be who you are. We are committed to creating a place as diverse as the communities we serve. Expected Base Pay Not Including Potential Commissions, Incentive, Bonus, etc. Opportunities: $21.00 - $24.00/hour (Based on experience) It is policy of Bob's Discount Furniture, Inc., to provide equal employment opportunity to all employees and applicants for employment. No person shall be discriminated against or harassed because of race, religion, color, sex, age, national origin, disability, pregnancy, citizenship, veteran or military status, or any other protected status in accordance with federal, state or local law. If you would like to contact us regarding the accessibility of our website or need assistance completing the application process, please contact ___. This contact information is for accommodation requests only and cannot be used to inquire about the status of applications.

Job Description Work Hours: 8 hour minimum work day with opportunity for overtime/OT pay and double pay on Sundays (infrequent) as project needs arise. Travel roughly 70%. Location: Bridgewater, NJ Compensation: Starting at $20-22/hr, Overtime/OT pay available. Company Benefits: Work-Life Balance Benefits • Per Diem for out-of-town stays with hotels covered Health and Wellness Benefits: • Medical Insurance options including no deductible plan through Medical-Horizon Blue Cross Blue Shield, • Dental/Vision Insurance eligibility, • Boot Allowance for non-office staff after 90 day probationary period, • Personal Protective Equipment provided or reimbursed Time Off and Leave Benefits: • Weekend or Holiday Premium pay, • Personal Time Off accrual based on service, • Holidays: New Year's Day, Memorial Day, July 4th, Labor Day, Thanksgiving & day after, Christmas, • Bereavement Leave for close relatives Career and Financial Benefits: • CDL Bonus opportunities, • Bonus incentives, • Driller License Reimbursement (For NJ and out of state), • 401k Retirement Plan with matching contributions, • Employee Referral bonus program Training and Development Benefits: • CDL Training and Support program, • License Maintenance and Cost Assistance, • Employee Reviews for growth and development, • OSHA Training with compensation Job Summary: Join Summit Drilling as a Driller's Assistant, where you'll play a vital role in supporting daily operations, ensuring safety, efficiency, and client satisfaction. Reporting to the Driller, you'll assist in equipment maintenance, site preparation, and field tasks execution, contributing to a dynamic and supportive work environment. Driller Assistant Role Responsibilities: • Safety and Compliance:, • Adhere to all safety programs and policies., • Participate in daily safety briefings and drills., • Properly use and maintain personal protective equipment (PPE)., • Equipment Preparation and Maintenance:, • Conduct daily checks and routine maintenance of drilling equipment., • Report equipment malfunctions or repair needs., • Manage tool inventory and assist in equipment setup., • Operational Support:, • Assist in site setup, material handling, and waste management., • Support drilling process and data collection., • Maintain site cleanliness and orderliness., • Client Satisfaction and Communication:, • Interact professionally with clients., • Update clients on project progress., • Address client questions and concerns promptly., • Data Collection and Reporting:, • Assist in accurate data collection and reporting., • Maintain logs and reports of drilling activities., • Team Collaboration and Development:, • Work cooperatively with the drilling team., • Seek feedback and participate in training., • Quality Control and Environmental Protection:, • Monitor drilling operations for quality adherence., • Follow environmental protection policies., • Emergency Response:, • Understand and follow emergency protocols., • Act quickly and effectively in emergencies., • Professional Development:, • Participate in learning and development programs., • Seek relevant certifications and licenses. Driller Assistant Requirements: • Previous experience in drilling or related field such as construction, hardscaping, landscaping, farming., • High School Diploma or equivalent., • Safety-first mindset with commitment to quality., • Valid driver’s license with clean driving record., • Excellent physical condition., • Strong teamwork and communication skills. Driller Assistant Preferrences: • CDL or relevant certifications., • Additional training in environmental science or related field. About Summit Drilling: Summit Drilling combines family-owned values with private equity resources to invest in top-tier equipment and veteran leadership development. Led by veterans who prioritize innovation such as cutting-edge technology, Summit fosters a people-first culture focused on success and guided by industry-leading safety standards. As a a leader in Environmental Drilling and Remediation services we are committed to excellence, innovation, and growth. With operations across the East Coast, we prioritize exceptional service and a supportive work environment. Summit Drilling is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status.

Industrial Maintenance Electrician Location: 1 Chris Court, Dayton, NJ 08810 Work Hours: 6:00 AM to 4:30 PM, Monday through Thursday Pay Range: $25 to $35 per hour Make the Right Connection-Build Your Career with Dixon! Richmond Foundry is looking for an Industrial Maintenance Electrician to be the backbone of our high-tech foundry in Dayton, NJ! This dual-threat role is critical for minimizing downtime and maximizing production. You will be responsible for the rapid diagnosis and repair of complex electrical systems (PLCs, VFDs, motors) and mechanical equipment (hydraulics, gearboxes, conveyors). Your proactive maintenance expertise is essential. We need a safety-minded professional committed to LOTO and operational excellence. If you thrive on technical challenge and want your skills to directly power success, apply now! Who We Are: Richmond Foundry, LLC, an affiliate of The Dixon Group is a leading producer of high-quality metal castings. We are committed to safety, excellence, and innovation. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. What You'll Do: \n • Install, troubleshoot, repair, and maintain electrical systems, motors, and control panels\n, • Perform mechanical repairs on plant equipment, conveyors, and machinery\n, • Conduct routine inspections and preventative maintenance\n, • Read and interpret electrical and mechanical diagrams and schematics\n, • Ensure compliance with safety regulations and company policies\n, • High school diploma required\n, • Technical training or additional education preferred\n, • Electrical troubleshooting and repair experience is a must.\n, • Proven experience as an industrial electrician and mechanic, ideally in a foundry or manufacturing environment\n, • Strong knowledge of electrical codes, and mechanical systems\n, • Extensive understanding of three-phase electrical systems and control theory\n, • Ability to read blueprints, schematics, and technical manual\n, • Troubleshooting and problem-solving skills\n, • Ability to work independently and as part of a team\n, • Certification or licensing as an electrician is preferred\n, • Forklift Certification is preferred\n, • Ability to lift heavy equipment and parts\n, • Standing, bending, and climbing for extended periods\n, • Medical, dental, and vision insurance for you and your family\n, • Competitive salary\n, • Bonus programs\n, • 401K retirement plan\n, • Training opportunities\n, • Tuition reimbursement\n, • Paid vacation, PTO, and holidays\n The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Responsibilities include • Operate and maintain production-worthy bench-top lapping and polishing equipment for fabricating qualification samples of crystals and finished goods., • Process specialized finished goods requested by customers., • Provide Qualification samples to analyze the crystal-melts for chemical additions, Laser Test Setup system, other Lab Equipment results, and exterior company testing., • Follow Process Procedure Documentation and Process Travelers to meet precise final material fabrication target thicknesses., • Fabrication up to but not limited to:, • Dicing, • Inspection and testing, • Dimensional Measurements Education & Experience • High school diploma or equivalent required, • Minimum Six months' experience working in a high-volume production environment, • Some experience working with fixtures, hand tools, and microscopes, • Basic computer, reading, and math skills (add, subtract, multiply, divide), • Good manual dexterity, • Able to wear plastic/latex gloves or finger cots, • Must wear PPE for specific work tasks, • Ability to read engineering drawings and process procedures, • Ability to follow instructions and procedures closely while offering suggestions, • Speaks and reads the English language Physical Requirements • Good manual dexterity, • Ability to detect visual defects using a microscope., • Able to wear plastic/latex gloves or finger cots., • Able to wear a lab coat and safety glasses., • Ability to use tweezers., • Ability to control high Magnetism magnets., • Able to clean Optics using a microscope, alcohol, and cleanroom swabs. All employees are required to follow the site EHS procedures and Coherent Corp. Corporate EHS standards. Quality and Environmental Responsibilities Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System. Culture Commitment Ensure adherence to company's values (ICARE) in all aspects of your position at Coherent Corp.: Integrity - Create an Environment of Trust Collaboration - Innovate Through the Sharing of Ideas Accountability - Own the Process and the Outcome Respect - Recognize the Value in Everyone Enthusiasm - Find a Sense of Purpose in Work Coherent Corp. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. If you need assistance or an accommodation due to a disability, you may contact us at [email protected].About Us Coherent is a global leader in lasers, engineered materials and networking components. We are a vertically integrated manufacturing company that develops innovative products for diversified applications in the industrial, optical communications, military, life sciences, semiconductor equipment, and consumer markets. Coherent provides a comprehensive career development platform within an environment that challenges employees to perform at their best, while rewarding excellence and hard-work through a competitive compensation program. It's an exciting opportunity to work for a company that offers stability, longevity and growth. Come Join Us! Note to recruiters and employment agencies: We will not pay for unsolicited resumes from recruiters and employment agencies unless we have a signed agreement and have required assistance, in writing, for a specific opening.

Job Description As a Medical Laboratory Assistant at Aculabs, you will play a key role in ensuring safe handling and preparation of patient specimens. You will be responsible for preparing and handling patient specimens safely, maintaining and operating lab equipment under supervision, reporting critical values, and following laboratory protocols and adhering to all regulatory and HIPAA compliance standards. About the Company Aculabs, an industry leader servicing long-term care homes across the Mid-Atlantic, is currently seeking a qualified Medical Laboratory Assistant. Family-owned and operated since 1972, Aculabs takes pride in delivering high-quality diagnostic services with a commitment to excellence. Ideal candidates are self-motivated professionals eager to learn and grow alongside experienced laboratory staff. Benefits * Competitive pay * Paid Time Off * Opportunity for growth and advancement * Health insurance and retirement benefits Responsibilities * Disposes of out of date patient specimens. * Assist with inventory for reagents and disposable supplies etc. for refilling, stocking, and placing in their assigned place. * Performs daily maintenance and loads quality control for laboratory procedures as assigned. * Operates instrumentation (moderate complexity) as assigned. * Communicates with nursing personnel * Maintains appropriate documentation Requirements/ Education (Any one of the following will be taken into account) * Minimum of a high school diploma. * Excellent communication skills * Familiarity with Microsoft Office, Word, Excel, Etc. * Ability to stand for long periods of time Aculabs is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description We're looking for entry-level Lot Attendants to build an exciting career at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500! As a Lot Attendant, you will be focused on maintaining the cleanliness and appearance of the vehicles at our Market Hubs. As part of this role, you will be expected to coordinate with fellow employees to ensure timely deliveries and the highest level of customer satisfaction. Interested in joining the team? Check out more below: • This is a full-time position We offer a competitive starting hourly rate of $17/hr with significant growth opportunities based on performance. You can boost your earnings within a short timeframe: • Pay Range: $17-$18 hourly, • Starting Pay: $17/hr, • At 3 Months: $17.25/hr, • At 6 Months: $17.50/hr, • At 9 Months: $17.75/hr We're looking for enthusiastic, energetic, and self-motivated team players to: • Ensure each vehicle is inspected for mechanical, drivability or cosmetic concerns, • Wash and vacuum all inventory on a regular basis, • Complete multi-point inspection on arriving inventory to include fuel level, safety features, drivability test and proper display of all company and state disclosures, • Maintain positive relationships with coworkers and external vendors, • Interact and communicate with team members and management across all lines of the business., • High School Diploma or equivalent is desirable, • Must be 18 years of age and have a valid driver's license, • Must have a valid driver's license and clean driving record for the past 3 years, • Must be able to lift up to 60 pounds independently; majority of lifting from knee to shoulder heights; other lifting required from various levels., • Must be able to carry and transport up to 60 pounds up to 20 feet., • Requires standing for an extended period of time with frequent stretching, reaching, walking and stooping, pushing and/or pulling in an environment that may be cold, hot, noisy, and wet and may have fumes or odors due to vehicle maintenance., • Requires working outdoors in all weather conditions., • Requires excellent visual acuity and manual dexterity., • Requires use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment., • Requires frequent driving and some typing. At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. Being a brand ambassador of Carvana means having a passion for our vision and having a motor that never quits when it comes to representing our brand and values. Our Market Operations team members work as a team to deliver awesome customer experiences in their markets, while also remaining agile enough to keep up with the ever-changing beat and cadence of your daily activities. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Job Description JOB DESCRIPTION: • Takes incoming phone calls as needed and completes service request forms., • Schedules service technicians to jobs., • Communicate with technicians to facilitate work., • Review service calls in D365 and prepare work orders for closing., • Manages resources in service department to complete work in a timely manner., • Communicates with customers to coordinate services and ensure customer satisfaction., • Manages technicians to meet department and company standards., • Adhere to COD Policy, Credit Approval Process, Engine Warranty Policy and Procedures. RECOMMENDED QUALIFICATIONS: • High School Diploma or equivalent required., • Minimum 3 years experience in the engine, truck or heavy equipment industry with progressive maintenance/repair supervisory experience and/or equivalent combination of training and experience which provides the required knowledge, skills and abilities., • Excellent communication and interpersonal skills; both verbal and written., • Strong time management skills, ability to work independently and multi-task effectively in a fast-paced environment., • Experience with Microsoft Office, Microsoft Excel, Microsoft Word, Microsoft Power Point and other related software. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veteran

Industrial Maintenance Electrician Location: 1 Chris Court, Dayton, NJ 08810 Work Hours: 6:00 AM to 4:30 PM, Monday through Thursday Pay Range: $25 to $35 per hour Make the Right Connection-Build Your Career with Dixon! Richmond Foundry is looking for an Industrial Maintenance Electrician to be the backbone of our high-tech foundry in Dayton, NJ! This dual-threat role is critical for minimizing downtime and maximizing production. You will be responsible for the rapid diagnosis and repair of complex electrical systems (PLCs, VFDs, motors) and mechanical equipment (hydraulics, gearboxes, conveyors). Your proactive maintenance expertise is essential. We need a safety-minded professional committed to LOTO and operational excellence. If you thrive on technical challenge and want your skills to directly power success, apply now! Who We Are: Richmond Foundry, LLC, an affiliate of The Dixon Group is a leading producer of high-quality metal castings. We are committed to safety, excellence, and innovation. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. What You'll Do: \n • Install, troubleshoot, repair, and maintain electrical systems, motors, and control panels\n, • Perform mechanical repairs on plant equipment, conveyors, and machinery\n, • Conduct routine inspections and preventative maintenance\n, • Read and interpret electrical and mechanical diagrams and schematics\n, • Ensure compliance with safety regulations and company policies\n, • High school diploma required\n, • Technical training or additional education preferred\n, • Electrical troubleshooting and repair experience is a must.\n, • Proven experience as an industrial electrician and mechanic, ideally in a foundry or manufacturing environment\n, • Strong knowledge of electrical codes, and mechanical systems\n, • Extensive understanding of three-phase electrical systems and control theory\n, • Ability to read blueprints, schematics, and technical manual\n, • Troubleshooting and problem-solving skills\n, • Ability to work independently and as part of a team\n, • Certification or licensing as an electrician is preferred\n, • Forklift Certification is preferred\n, • Ability to lift heavy equipment and parts\n, • Standing, bending, and climbing for extended periods\n, • Medical, dental, and vision insurance for you and your family\n, • Competitive salary\n, • Bonus programs\n, • 401K retirement plan\n, • Training opportunities\n, • Tuition reimbursement\n, • Paid vacation, PTO, and holidays\n The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Industrial Maintenance Electrician Location: 1 Chris Court, Dayton, NJ 08810 Work Hours: 6:00 AM to 4:30 PM, Monday through Thursday Pay Range: $25 to $35 per hour Make the Right Connection-Build Your Career with Dixon! Richmond Foundry is looking for an Industrial Maintenance Electrician to be the backbone of our high-tech foundry in Dayton, NJ! This dual-threat role is critical for minimizing downtime and maximizing production. You will be responsible for the rapid diagnosis and repair of complex electrical systems (PLCs, VFDs, motors) and mechanical equipment (hydraulics, gearboxes, conveyors). Your proactive maintenance expertise is essential. We need a safety-minded professional committed to LOTO and operational excellence. If you thrive on technical challenge and want your skills to directly power success, apply now! Who We Are: Richmond Foundry, LLC, an affiliate of The Dixon Group is a leading producer of high-quality metal castings. We are committed to safety, excellence, and innovation. At The Dixon Group, we value the contributions of our Military Veterans and proudly employ our nation's heroes. Veterans are strongly encouraged to apply. What You'll Do: \n • Install, troubleshoot, repair, and maintain electrical systems, motors, and control panels\n, • Perform mechanical repairs on plant equipment, conveyors, and machinery\n, • Conduct routine inspections and preventative maintenance\n, • Read and interpret electrical and mechanical diagrams and schematics\n, • Ensure compliance with safety regulations and company policies\n, • High school diploma required\n, • Technical training or additional education preferred\n, • Electrical troubleshooting and repair experience is a must.\n, • Proven experience as an industrial electrician and mechanic, ideally in a foundry or manufacturing environment\n, • Strong knowledge of electrical codes, and mechanical systems\n, • Extensive understanding of three-phase electrical systems and control theory\n, • Ability to read blueprints, schematics, and technical manual\n, • Troubleshooting and problem-solving skills\n, • Ability to work independently and as part of a team\n, • Certification or licensing as an electrician is preferred\n, • Forklift Certification is preferred\n, • Ability to lift heavy equipment and parts\n, • Standing, bending, and climbing for extended periods\n, • Medical, dental, and vision insurance for you and your family\n, • Competitive salary\n, • Bonus programs\n, • 401K retirement plan\n, • Training opportunities\n, • Tuition reimbursement\n, • Paid vacation, PTO, and holidays\n The Dixon Group is committed to protecting the privacy rights of its employees and job applicants to the fullest extent required by applicable law. To that end, personal information will be collected solely for those legitimate business purposes recognized by law, and then maintained in a manner consistent with all applicable laws and regulations pertaining to document retention requirements. The Dixon Group does not sell personal information to third parties, and does not share such personal information with third parties except when authorized by law to do so (e.g., in response to a lawful subpoena; mandatory tax reporting; etc.) Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job Description Groundworks, is seeking talented Service Technician to join their team in the South Plainfield, NJ area! The Service Technician is an integral part of the customer journey post installation. They focus on partnering with customers to inspect and service preexisting company installed foundation repair and water management solutions. The Service Technician supports our customers with additional solutions options and needs. Why you should join our Service Team * $18/hr Base Pay + Commission with NO CAP on earnings * Average annual earnings $120,000 * Company Vehicle and Gas Card provided * Full-time nonseasonal work * Pre-qualified, high-quality appointments, no cold-calling required! * Advanced leadership training opportunities from a promote from within led culture * Benefits include Medical, Dental, Vision, Long/Short Term Disability, Life insurance, 401(k) with a company match, PTO after applicable waiting periods * Equity in North America’s Leading Foundation Repair and Water Management Company Job Responsibilities * Execute appointments scheduled with customers * Travel to customers' home based on assigned appointments * Build long-term relationships with customers and professionally represent the company * Recommend additional products and services to enhance or improve original installation or to remedy a potential issue through established processes and procedures * Perform annual customer maintenance visits, examining work previously completed * Perform reactive service appointments, diagnose, and fix any issues * Install additional products purchased by the customer as necessary * Adhere to safety regulations and procedures when carrying out responsibilities * Examine solutions installed by the company and determine potential warranty or non-warranty work * Communicate the status of each job (completions and complications) and submit all necessary documentation to the Service Manager and customer as required * Other duties as assigned Qualifications * 1 or more years of proven sales experience preferred but not required * Construction/Home Improvement experience preferred * Proven customer relations experience preferred * High school diploma or GED or equivalent experience * A valid, non-restrictive Driver's License is required Requirements * Full-time * Remote & Onsite: Reporting into and working remotely of Branch location * Servicing area within territory Groundworks® is the leading provider of Foundation Repair, Crawl Space Encapsulation, Basement Waterproofing, and Concrete Lifting & Stabilization. With locations across the USA and Canada, Groundworks is the leading foundation solutions and water management company in North America! Recognized as a Top Workplaces USA™ company and offering employee ownership for everyone, we're building something that just can't be replicated. And we're on a mission to change an industry like never before! We're unique here at Groundworks. We are all connected through the same vision, mission, and values, and we are stronger together. We're proud to be the Groundworks Tribe! Our highly trained teams have decades of experience delivering innovative solutions, unmatched quality, and industry-leading warranties, helping homeowners everywhere protect and repair their most valuable asset – their home. When customers choose a local Groundworks company, they can feel confident they’re hiring the trusted local experts who will ensure the job’s done right. When you choose Groundworks, you'll join thousands of Tribemates who are making history. Company DescriptionOur Tribe As the nation’s largest privately held foundation services company, we do things differently than the typical contractor. We live up to our word and the exceptional service our customers have come to expect from us. It’s the Groundworks difference. Our strength does not lie in our numbers, but in our people and their experience and expertise. We are a nationwide family of visionaries who put our customers first and set out to accomplish what no other foundation repair company has ever accomplished before. Today, with more than 5000 employees in 61 locations, Groundworks is the nation’s leading and fastest-growing foundation services company. The combined companies have helped over 1 million homeowners protect and repair their most valuable asset, their home.Our Tribe\r\n\r\nAs the nation’s largest privately held foundation services company, we do things differently than the typical contractor. We live up to our word and the exceptional service our customers have come to expect from us. It’s the Groundworks difference.\r\n\r\nOur strength does not lie in our numbers, but in our people and their experience and expertise. We are a nationwide family of visionaries who put our customers first and set out to accomplish what no other foundation repair company has ever accomplished before.\r\n\r\nToday, with more than 5000 employees in 61 locations, Groundworks is the nation’s leading and fastest-growing foundation services company. The combined companies have helped over 1 million homeowners protect and repair their most valuable asset, their home.

Job Description Job Overview: We are seeking a skilled and dedicated Automotive Mechanic to join our team. The ideal candidate will possess a strong mechanical knowledge and experience in various automotive repair tasks. This role involves diagnosing, repairing, and maintaining vehicles to ensure they operate safely and efficiently. The Automotive Mechanic will work with a diverse range of vehicles and systems, including diesel engines, auto body repairs, and advanced driver-assistance systems (ADAS). Job Responsibilities: • Diagnose, repair, and maintain diesel engines and associated vehicle systems, including transmissions, brakes, hydraulics, and electrical systems., • Perform scheduled maintenance and inspections to ensure vehicle safety and performance., • Troubleshoot engine and system failures using diagnostic tools and techniques., • Replace faulty parts or systems with efficiency and accuracy., • Adhere to safety standards and company protocols., • Maintain accurate records of all repairs, parts used, and labor times., • High school diploma or equivalent; trade school or technical training in diesel mechanics is preferred., • 3+ years of hands-on experience as a diesel mechanic., • In-depth knowledge of diesel engines, components, and repair techniques., • Ability to use diagnostic equipment and tools effectively., • Strong problem-solving skills and attention to detail., • Physical stamina to work with heavy parts and equipment., • Valid driver’s license (CDL preferred but not required)., • Strong work ethic and ability to work both independently and as part of a team.

Job Description New Job Opportunity! We are seeking a Bilingual Production Supervisors for a manufacturing facility! As a Bilingual Production Supervisor, you will oversee the manufacturing process to ensure it runs smoothly, efficiently, and safely. You will lead and guide production workers, enforce safety protocols and training, coordinate equipment maintenance, and identify opportunities for process improvements. For the right candidate, the position is a direct hire! Location: Piscataway, NJ Salary: Annual $55k-$80k Shifts: • Shift C - Wednesday 12pm - 6pm, then Thursday, Friday & Saturday 6am-6pm, • Shift D - Wednesday 12am midnight to 6am, then Thursday, Friday and Saturday 6pm - 6am Responsibilities: • Follow-up implementation of company standards for products and processes during shift responsibilities., • Be on the shift 15 minutes prior to your scheduled time to meet with the outgoing supervisor and meet and brief the incoming supervisor for a smooth transition and effective hand off between shifts., • Provide timely and accurate reports on production metrics, issues, and improvements to management., • Supervise the entire production operation, shifts, lines and other related functions., • Supervise the training of production line employees and spend time with new trainees., • Responsible for managing the scheduling of hourly production personnel., • Review Data in IFS Quick Reports and other production related documentation., • Assist in maintaining the standard in the timing of Resin Blends and line changes and operating procedures., • Guarantee all byproducts are correctly recorded in the IFS system prior to transporting them to the reprocessing department., • Validate/enforce safe operation, complying with corporate accident prevention program, and following safe work practices., • Conduct initial workplace accident investigations and report all injuries on the shift., • Assist with required safety meetings with shift employees., • Make sure that all equipment is maintained and operated according to GMP practices., • Collaborate with Cooperate with maintenance department in required maintenance of equipment and facilities. Qualifications: • High School degree or equivalent required., • Bilingual English-Spanish a must!, • Minimum one year of experience in blown film extrusion or similar manufacturing environment., • Understanding extrusion processes, materials and equipment, • Extrusion process knowledge., • Understanding of the blown film extrusion process, including machinery operation, polymer properties, and film characteristics., • Familiarity with extrusion machinery, including blowers, dies, and chillers., • Ability to troubleshoot and perform basic maintenance on extrusion equipment., • Experience with statistical process control (SPC) and data analysis., • Knowledge of Microsoft Office and ERP Systems., • Strong verbal and written skills Other • Ability to work 12 hour shifts, • Able to work in a non-controlled climate environment, • Pay is bi-weekly, • Annual incentive based on work performance, • Health insurance, • 401K

Job Description SERV, a well-established leader in behavioral healthcare in New Jersey, supports people with mental illness and/or intellectual/developmental disabilities as they achieve greater independence and life satisfaction through a wide range of services. JOB SUMMARY: The Residential Counselor - Mental Health, provides therapeutic residential support to adult clients with mental illness. The successful candidate will assist with daily living activities, medication management and crisis intervention in a group home setting. ESSENTIAL DUTIES & RESPONSIBILITIES: • Provides support to clients in daily living skills and personal care needs, • Provides direct supervision in a group home setting, • Assists with maintenance and upkeep of the group home with the assistance of resident clients, • Provides input into assessments, conferences and treatment planning, • Organizes and supervises recreational and social activities, • Provides support and assistance to clients in obtaining additional needed services, • Collects and records data, and completes all required documentation, • Follows policies and procedures for the monitoring of clients’ medications, • Intervenes appropriately with clients to prevent, avert or manage crisis situations, • Provides transportation as needed and accompanies clients to and from appointments, • High school diploma or equivalent with four (4) years of work or life experience, OR, • High school diploma or equivalent with two (2) years of work or life experience and a Licensed Practical Nurse (LPN) license, OR, • Bachelor’s degree from an accredited college or university in a mental health, health or other related human services discipline, or license as a Registered Nurse (RN) OR, • Bachelor’s degree from an accredited college or university in a non-mental health/health human services discipline and one or more years of related work or life experience together equaling four (4) years, • Valid and unrestricted driver's license with a clean driving record., • Excellent interpersonal and communications skills, • Ability to demonstrate respect for individuals with mental illness and their families.SALARY:, • $18.53 to $19.86 per hour based on experience and education.#INDPR2 EEO STATEMENT: We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, veteran status, or any other characteristic protected by law. Powered by JazzHR 2xF74oQEJZ

The Harvard Companies provide important building services to thousands of clients across the business community. Harvard Maintenance and Harvard Protection Services are two of the largest and fastest growing, privately owned providers of high quality janitorial and security services in the United States. We are an industry leader and are well known for our innovative thinking and entrepreneurial spirit. Our success over the last fifty years stems from Harvard's Inverted Pyramid, which recognizes that our front-line employees are the most important people in our organization. The Inverted Pyramid ensures that our employees feel valued, are given the tools to be successful, and are empowered to execute in their roles. People are also at the center of our Core Values. Our People First core value clearly states that "we are a family organization that promotes respect and embraces diversity". Job Summary: Basic cleaning, including cleaning of all common areas, restrooms, entrances, elevators, walkways, windows, furniture, fixtures, stairs, chairs, tables, telephones, drinking fountains, trashing, dusting polishing and other assigned items/areas. This is a part-time opportunity (6PM-10PM). • Responsible for all basic cleaning, • Cleaning of restrooms includes restocking toilet tissue and other dispensers, emptying trash, clean and sanitize fixtures, clean mirrors, spot clean partition doors and walls, sweep and mop tile floors, and clean toilets and urinals, • Move furniture, vacuum, reposition furniture, empty trash and replace liners, • Check all trash containers prior to moving it, • Cleaning includes dust mopping, damp mopping, sweeping, vacuuming, gum removal, dusting, picking up larger objects off the floor and spot cleaning glass, • Performs additional duties as required, including attending to flooded areas, incidental spills, and related clean-up work for trash and restroom concerns, • Restock carts and closets at the end of each shift, • High School Diploma, • Minimum of 1 year experience, • Strong communication skills An Equal Opportunity Employer --- M/F/D/V