Trabajos control systems engineer en New Brunswick, New JerseyCrear alertas

Role : Technical Delivery Leader — Cloud Location : Warren , NJ (Hybrid) Full Time End client: Over the call only. Experience - 15+ look for more strong technology exposure. Most are coming across as managers who know a little about technology. Engagement Type: Managed Services About the Role We are seeking a highly proactive and seasoned Senior Onshore Delivery Leader to drive complex cloud solutions at a strategic client engagement in New Jersey. This high-visibility, client-facing role demands exceptional leadership and communication skills to act as the single point of technical and strategic accountability. You will be a go-getter, navigating a challenging environment to architect innovative solutions, influence senior client stakeholders, and provide decisive technical direction to the delivery organization, ensuring superior quality and measurable business value. This role requires the ability to hold a deep architectural conversation, lead strategic governance, and personally drive technical excellence. This role is not a back-office coordination position — it requires someone who can hold a technical conversation in the morning, run a governance call at noon, and review an offshore deliverable in the afternoon. You will be the face of the delivery organisation at the client site, and the quality bar you set will define how the engagement is perceived. Key Responsibilities Architectural Strategy & Technical Excellence • Lead the definition of target-state cloud architecture, ensuring solutions are scalable, reliable, and aligned with the client's long-term business strategy., • Act as the hands-on technical authority, providing decisive guidance and deep technical conversation across Cloud Infrastructure, Observability, and DevOps workstreams., • Proactively identify architectural risks and technical debt, developing and championing solutions with a 'go-getter' attitude to drive continuous, value-add improvements., • Own the technical design review and approval process for all solution blueprints, runbooks, and operational procedures produced by the offshore team., • Serve as the key technical escalation point, utilizing deep expertise in AWS core services and cloud best practices to resolve complex architectural challenges. Strategic Communication & Client Leadership • Serve as the primary, high-impact onshore technical leader, managing strategic communication and building rapport with senior client stakeholders (Director / Senior Director level)., • Demonstrate strong communication skills to articulate complex architectural designs and technical roadmaps into clear, compelling business value propositions for executive review., • Lead strategic governance calls, steering meetings, and operational reviews, using excellent leadership skills to guide decision-making and proactively manage expectations with a solutions-first, 'no surprises' approach., • Translate client expectations, priorities, and strategic feedback into clear, actionable architectural requirements and delivery direction for the offshore team. Execution Drive & Accountability • Drive the execution of the solution roadmap, ensuring the offshore delivery team’s output consistently meets the defined architectural and quality standards (e.g., well-architected, secure, compliant)., • Establish and enforce rigorous quality gates for all architectural and technical deliverables before client submission, serving as the ultimate technical sign-off authority., • Be a go-getter in resolving complex delivery blockers and performance challenges quickly, holding teams accountable to committed timelines and quality standards., • Drive continuous improvement in delivery processes, focusing on automation and efficiency in collaboration with offshore engineering teams. Architectural Governance & Reporting • Own the creation and presentation of executive-level governance artifacts, focusing on architectural runway, technical debt reduction, and strategic roadmap progress., • Run structured governance cadences (daily, weekly, monthly) with discipline and consistency., • Ensure adherence to cloud governance frameworks (IAM, security, cost control) and established ITSM processes (incident, problem, change, and service request management)., • Maintain accurate and up-to-date documentation of open architectural actions, risks, and decisions. Required Qualifications • 20+ years of experience in cloud infrastructure, DevOps, or solution architecture, with at least 5+ years in a client-facing leadership or strategic advisory role., • Strong AWS expertise — deep, hands-on knowledge of core AWS services (EC2, VPC, S3, IAM, RDS, EKS, CloudWatch, etc.), cloud operations best practices, and AWS Well-Architected principles., • Proven experience in architecting and governing complex managed services engagements, including SLA adherence, incident management, and continuous service improvement., • Demonstrated ability to lead and mentor offshore delivery teams, setting clear architectural direction, managing time-zone coordination, and maintaining high quality standards. Professional Skills • Exceptional communication and stakeholder leadership skills, capable of influencing both highly technical teams and executive audiences., • A demonstrated "go-getter" attitude and execution-oriented mindset, with a proven track record of solving complex problems and driving outcomes in challenging client environments., • Strong architectural judgment and decisive decision-making ability., • Solid command of ITSM frameworks (ITIL preferred) and experience running structured operational governance processes., • Experience working directly with technically proficient senior client stakeholders (Director / Senior Director level)., • Must be based in New Jersey and willing to work from the client office 3 days per week. Preferred Qualifications • Multi-cloud experience (GCP, Azure) in addition to AWS., • AWS certification — Solutions Architect Professional or DevOps Engineer Professional., • Experience with DevOps toolchains — CI/CD pipelines, IaC (Terraform), container platforms (EKS, ECS), and GitOps practices., • Familiarity with FinOps principles and cloud cost optimization in an architecture context., • ITIL V3/V4 certification., • PMP or equivalent programme management certification., • Prior experience in technology consulting or systems integration environments managing complex client engagements. --

Summary The Security Engineer main role is to design, implement, and oversee our cybersecurity strategy, ensuring robust protection against evolving threats. The ideal candidate will have 7-10 years of experience in cybersecurity architecture, security operations, and risk management with a strong focus on enterprise security solutions, cloud security, identity & access management (IAM), and security best practices. The Security Architect must have hands-on experience with internet secure gateway, EDR, MDR, ITDR, secure email gateway, firewalls, MFA, scripting, policies, data classification, and cloud security controls. This role requires deep expertise in security frameworks, architecture principles, security automation, and compliance standards (NIST, CIS, ISO 27001, Zero Trust, etc.). Essential Functions • Develop and maintain a comprehensive security architecture covering on-premises, cloud, and hybrid environments., • Design security solutions that align with business objectives while mitigating risk., • Ensure Zero Trust principles, network segmentation, and security best practices are enforced across the enterprise., • Architect cloud security strategies, leveraging best practices for Azure and GCP., • Lead security investigations, conduct root cause analysis, and document incident response actions., • Provide threat intelligence and recommend proactive security measures to mitigate risk., • Implement and maintain cloud security controls in Azure and GCP., • Optimize cloud security solutions for web and network protection., • Ensure Active Directory (AD) and IAM policies align with best practices., • Support identity governance, access reviews, and privileged access management (PAM)., • Oversee the continuous best practice is leveraged for data classification policies and enforce data protection controls., • Conduct security assessments and ensure compliance with industry standards (PCI, NIST, CIS)., • Recommend, evaluate, and implement new security technologies based on business needs and threat landscape., • • Work with DevOps and IT teams to integrate security automation, security-as-code, and DevSecOps principles. Additional Functions • Threat Modeling & Risk Management:, • Conduct threat modeling, risk assessments, and security reviews for applications, infrastructure, and networks., • Provide technical leadership in responding to security incidents, forensic analysis, and root cause investigations., • Develop and maintain security policies, standards, and playbooks for security operations., • Collaborate with IT and business units to ensure security compliance with regulatory frameworks (PCI DSS, NIST, ISO 27001, SOC 2)., • Identity & Access Management (IAM) & Authentication:, • Design and enhance IAM policies, privileged access management (PAM), and role-based access control (RBAC)., • Enforce strong authentication and MFA strategies using Okta, Microsoft Authenticator, and AD., • Define identity threat detection and response (ITDR) strategies. Security Governance & Compliance: • Ensure security controls align with industry frameworks (NIST CSF, ISO 27001, CIS, Zero Trust, MITRE ATT&CK)., • Assist with audit, regulatory compliance, and security assessments., • Conduct penetration testing, red/blue teaming exercises, and vulnerability management programs., • Provide security guidance for third-party risk management and vendor security evaluations. Leadership & Collaboration: • Act as a subject matter expert (SME) in cybersecurity architecture and best practices., • Provide mentorship and training to security engineers and analysts., • Work cross-functionally with IT, DevOps, and executive leadership to align security strategy with business goals., • Develop security roadmaps and strategic initiatives for continuous security improvement., • Maintain and fine-tune security configurations across various security platforms., • Identify security gaps and recommend security enhancements and process improvements., • Develop playbooks and automation scripts to enhance security operations efficiency., • Conduct vulnerability assessments and penetration testing to identify security weaknesses in systems and applications., • Develop and implement security policies, procedures, and standards to ensure compliance with industry’s best practices and regulatory requirements., • Investigate security breaches and other security incidents to determine the root cause and implement corrective actions., • Stay up-to-date on the latest security threats and vulnerabilities and recommend appropriate security measures., • Collaborate with other IT teams to ensure that security is integrated into all aspects of the organization's IT infrastructure., • Participate in security audits and assessments to identify and address security gaps., • Develop and maintain incident response plans and procedures., • Evaluate and recommend security technologies and solutions to improve the organization's security posture. Qualifications • 7-10 years of experience in cybersecurity architecture, security operations, or cloud security., • Deep understanding of:, • Enterprise security architectures, security frameworks (NIST, CIS, Zero Trust, ISO 27001), and best practices, • Email secure gateway (Proofpoint, Mimecast), • Firewalls (Palo Alto, Cisco) and network security principles, • Cloud security (Azure, GCP) and security automation, • IAM, MFA, AD, Okta, Microsoft Authenticator, • Endpoint security, EDR, ITDR, and threat intelligence, • Data classification, DLP, and information protection, • Experience designing secure architectures for large-scale enterprises and cloud environments., • Strong knowledge of DevSecOps, security automation, and scripting (Python, PowerShell, Terraform)., • Excellent communication and leadership skills, capable of influencing security strategies across the organization., • CISSP Certifications (Required): CISM and CCSP is plus, • A bachelor's degree in computer science, information systems, or a related experience., • 7-10 years of experience in cybersecurity, security operations, or network security., • Hands-on expertise with:, • Zscaler, CrowdStrike, Microsoft Defender, Sophos, • Proofpoint (Email Security Gateway), • EDR & ITDR solutions, • Palo Alto & Cisco Firewalls, • Okta, Microsoft Authenticator (MFA), Active Directory (AD), IAM, • Cloud Security (Azure and GCP), • Data classification and protection strategies, • Strong knowledge of threat intelligence, SIEM, vulnerability management, and incident response., • Experience with security frameworks such as PCI, NIST, ISO 27001, CIS Benchmarks., • Strong analytical, problem-solving, and communication skills., • Ability to work independently and collaboratively in a fast-paced environment., • Excellent communication and interpersonal skills, capable of collaborating effectively with cross-functional teams. Working Conditions & Physical Demands This position requires in person office presence at least 4x a week.

Job DescriptionSummary: We are representing a well-established, multi-discipline civil engineering and land surveying firm seeking a Civil Engineer to support land development projects across the greater Central New Jersey region. This role focuses heavily on site development design using Civil 3D and is ideal for engineers who enjoy hands-on production work across grading, drainage, utilities, and permitting workflows. The position supports private-sector commercial, residential, and mixed-use developments and offers strong exposure to full-cycle civil design. This is a strong opportunity for a technically driven engineer looking to grow within a stable regional firm known for long-standing municipal relationships and steady project flow. Key Responsibilities: Prepare civil engineering plans and construction documents using AutoCAD Civil 3D Perform site grading, drainage, and stormwater management design Develop utility layouts including sanitary sewer, storm systems, and water mains Support engineering calculations, reports, and permitting submissions Coordinate with survey teams and internal disciplines to ensure accurate plan integration Address municipal review comments and revise plans as needed Implement redlines and assist with internal quality control processes Support project delivery from concept through construction documentation Qualifications: 5+ years of civil engineering experience with a strong focus on land development Advanced AutoCAD Civil 3D proficiency in a production environment Experience with grading, drainage, and site layout design Familiarity with municipal permitting and agency review processes Bachelor’s degree in Civil Engineering required EIT preferred or actively pursuing PE licensure Strong technical communication and organizational skills Ability to manage multiple design tasks in a collaborative team environment Compensation + Benefits: Competitive salary aligned with Central NJ market expectations ($85K–$115K typical range) Medical, dental, and vision insurance 401(k) plan Paid holidays and PTO Long-term growth within a stable, regionally established engineering firm Hands-on mentorship and strong Civil 3D technical development

Job DescriptionDescription: Job description: We are seeking a BIM Coordinator to join our organization. This position is to assist in the creation, evaluation, and distribution of 3D BIM and 2D drawings for use in estimating, purchasing, and construction operations.?The BIM Coordinator?will assist all project managers and field personnel to facilitate collaboration and communication throughout the project, and interact with subcontractors, vendors, and the design team during construction.?In addition to working in a fast-paced environment, the BIM Coordinator will have primary responsibility for assigned projects, as CAD Operator/Project Engineer. Candidates must be able to perform essential field Coordinating tasks and have strong capabilities with AutoCAD, AutoCAD MEP, Navisworks, and BIM 360, with working knowledge of Revit, and related programs. Requirements: General Responsibilities • Has knowledge of and/or takes initiative to learn modeling software; including but not limited to Navisworks, Revit, and AutoCAD, • Maintain integration of models including structure, interior, and exterior architectural elements and MEP systems, • Coordinate with BIM service providers and/or Subcontractors, • Update As-built and revised BIM logs and reports; maintain BIM server folders, • Assist with uploading, maintain, and distributing documents to the field and subcontractors, • Assist in set-up and maintain all control logs (RFI’s, shop drawings, as-built, drawing logs, etc.) and shop/fabrication-level models for approval, • Site inspection and liaising with trade contractors, • Participate in model coordination and model coordination meetings., • Compile contract BIM closeout documentation, • Works on complex assignments independently, with attention to detail, and a high degree of initiative to resolve issues; involves others in decisions when needed. Minimum Requirements • Associate degree in Civil, Electrical, Mechanical, Construction Management, Construction Technology, or equivalent experience., • Minimum 2-4 years of project Coordination experience – intern field Coordinator, entry-level field Coordinator, or equivalent., • Strong ability to read and understand plans and specifications., • Minimum 2 years consistent use, and be able to demonstrate experience in required software (Revit, AutoCAD, Navisworks )

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description General Responsibility This position is a hands-on role requiring strong technical, organizational, and communication skills, focused on supporting BEUMER’s installed systems within the Customer Support division. The Controls Engineer II applies professional programming knowledge to troubleshoot, optimize, and enhance machine control systems—primarily within baggage handling and sortation environments. This role plays a key part in ensuring system reliability, performance, and customer satisfaction by working closely with Service, Engineering, and Customer teams to support ongoing operations, upgrades, and modernization initiatives. Responsibilities: • Understand customer operational needs and translate them into effective control system solutions for existing installations., • Troubleshoot, maintain, and enhance machine control systems for BEUMER sorters using standard BEUMER control code., • Diagnose and resolve PLC, controls, and system-level issues in live operational environments., • Support service activities including corrective maintenance, preventive maintenance, and system optimization., • Interpret electrical design drawings and specifications to support troubleshooting and modifications., • Collaborate with Electrical Engineering to support I/O network troubleshooting, updates, and system improvements., • Partner with software developers and cross-functional teams to resolve system issues and implement enhancements., • Participate in system testing, validation, and updates both remotely and on-site., • Prepare and maintain accurate service documentation, including as-built updates and change logs., • Support on-site service activities, including commissioning support, retrofits, and system upgrades., • Assist in lifecycle support initiatives, including modernization and continuous improvement efforts., • Provide technical support and guidance to Field Service Technicians and customers as needed., • Contribute to root cause analysis efforts and implement corrective actions to prevent recurrence., • May be assigned to special projects or other duties as required. Compensation range: $110,000.00 - $120,000.00 Annually The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors Qualifications Requirements/Skills and Abilities: • Bachelor’s degree in Controls Engineering, Electrical Engineering, or related field (or equivalent experience)., • Minimum 5 years of relevant experience in controls engineering, preferably within service or support environments. Technical Knowledge: • Advanced machine control concepts and troubleshooting methodologies., • Strong understanding of PLC programming, especially Siemens (TIA Portal)., • Experience with Allen-Bradley PLCs is a plus., • Ability to read and interpret electrical schematics and system documentation. Core Competencies: • Ability to evaluate and resolve controls-related issues independently in time-sensitive environments., • Strong problem-solving skills with a focus on root cause analysis and long-term solutions., • Ability to quickly adapt to new control platforms and evolving technologies., • Experience using computer-based tools for diagnostics, programming, and service tracking., • Strong collaboration skills with cross-functional teams and customer stakeholders., • Ability to manage multiple priorities in a fast-paced, customer-focused environment. Professional Skills: • Excellent time management and attention to detail., • Strong verbal and written communication skills., • Customer-focused mindset with a commitment to service excellence., • Professional, positive, and proactive attitude., • • Willingness and ability to travel to customer sites as needed (typically up to 25%). Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential., • Per Diem Eligibility: Allowances in accordance with the IRS schedule for qualified travel expenses Equal Opportunity Statement: BEUMER is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, sex (including pregnancy and breastfeeding), gender, affectional or sexual orientation, gender identity or expression, transgender status, national origin, age, ancestry, disability (mental or physical), veteran status, genetic information, atypical hereditary cellular or blood trait, marital status, civil union status, domestic partner status, or any other status protected under local, state or federal laws - prohibits discrimination, harassment, and retaliation in all aspects of employment. This commitment applies to recruitment, hiring, training, promotion, compensation, benefits, discipline, termination, and all other terms and conditions of employment. By accepting an offer of employment with BEUMER, the employee agrees to abide by all policies and practices that promote a workplace free from discrimination and harassment and acknowledges BEUMER’S commitment to diversity and inclusion.

Job Description Attalon is a leading technology partner to the global aerospace and defense industry, specializing in the physics of light and heat. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Summary: Attalon is seeking an embedded software engineer to contribute to the development of advanced laser systems for defense applications. Primary Duties & Responsibilities: Software Architecture and Design: Works as a member of a cross-disciplinary team of systems engineers, optical engineers, electrical engineers, and FPGA engineers to conceptualize a system solution that meets customer requirements. Responsible for architecting, designing, and documenting software for assigned projects. Creates design documentation including Software Requirements Documents, block diagrams, Software Design Documents, and Interface Control Documents. May serve as the lead software engineer on assigned projects. Software Development and Test: Develops software (primarily embedded) to meet the requirements of the system under development. Writes software test plans and tests software at various levels of integration (unit tests, tests on target architecture, test with target electronics). Writes software scripts and tools to support software development and system test. System Integration and Test Support: Develops Software Test Plans and supports integration and test activities from initial board-level bring up through final system test. New Business Development: Participates in writing proposals and providing cost and schedule estimates in support of new business pursuits. Technical Expertise: Subject matter expert with extensive knowledge and expertise in embedded systems and software development. Works independently with general direction to achieve goals and objectives. Exercises judgment in selecting methods, techniques and evaluation criteria for obtaining results. Makes accurate detailed work plans for complex systems/projects; takes the lead in planning and executing software tasks. Education & Experience: • Typically requires a minimum of 9 years of related experience with a Bachelor’s degree; or 7 years and a Master’s degree; or a PhD with 4 years experience; or equivalent experience. Skills: • Must have significant demonstrated experience in architecting and designing software solutions in embedded systems. Must have deep understanding of tradeoffs involved in hardware/software functional partitioning., • Must have a strong understanding of embedded processor platforms and be familiar with microcontrollers, FPGAs and system-on-chip devices. Experience with AMD/Xilinx platforms is preferred., • Must have significant past experience developing software in C and C++, and a strong background in object-oriented programming. Must have strong debugging and troubleshooting skills. Experience developing in one or more of the following are also highly desirable: C#, Python, LabVIEW., • Must have significant experience developing software for real-time operating systems (RTOS) and/or embedded Linux., • Must have strong understanding of embedded hardware devices, chip-to-chip interfaces, and networking protocols., • Must have demonstrated experience working with cross-disciplinary engineering teams to develop and test highly-functional integrated systems., • Experience working with laser systems is desired but not required. Past experience on high-reliability systems for defense and/or space is desired but not required., • Must be able to obtain/maintain a US Government security clearance if one is required to perform the job responsibilities. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job Description The Quality Assurance Engineer II is responsible for conducting complex ongoing analysis of the production process inputs and outputs to ensure that customer quality requirements are being achieved. The Quality Engineer II is expected to: • Maintain SPC limit at or above the corporate target., • Keep customer complaints less than or equal to previous year, • Manage CAR containment and root cause investigation, corrective action plan and completions on time, • Maintain scrap below the maximum percent of sales identified Research & Analysis • Collects production data and applies standard scientific and statistical methods to analyze, document, and diagram production processes. Conducts FMEA, DOE, and SPC analysis, • Performs complex data analysis and uses six sigma tools to resolve complex quality issues., • Provides input to the production control systems and designs control activities, • Provides input for new product equipment selection, installation and maintenance, • Maintains expert level of understanding of GD&T, • Leads investigations to determine root cause, development of corrective action plans, verification and effectiveness activities., • Use appropriate statistical techniques to analyze data and make/recommend decisions, • Leads projects, teams and complex product transitions., • Provides mentorship and support to team members Customer Support • Develops quality standards and processes related to customer specifications and process improvement, • Communicates with customers, suppliers and other resources to achieve the objectives, • Works with customers to understand product specifications and satisfies any quality related issues or concerns. Quality Assurance • Evaluates process stability and capability, • Analyzes processes and procedures to ensure they fit the organization’s quality standards., • Ensures quality processes and procedures comply with internal SOPs, • Assists with regulatory audits, • Performs inspections and sets quality assurance testing models for analysis of raw materials, materials in process, and finished products., • Provides communication to Calibration Technicians of any additions, deletions, or changes to the process gages and equipment, • Writes detailed work instruction-level documents for Quality and related areas. Trains personnel in these instructions and other technical process controls, • Quarantines, documents and evaluates products and materials and generates Material Review Board (MRB) Case(s) as appropriate., • Ensures control plans and associated documentation are implemented effectively and maintained., • Monitors and reports on quality-related key performance indicators, • Ensures compliance and assists with adherence to quality management system, • Writes product test procedures and performs IQ/OQ/PQ protocol. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE • Bachelor’s degree in Engineering or a related field is required., • At least 4-7 years of quality experience in a manufacturing environment or equivalent combination of education and experience is required. LICENSE AND CERTIFICATION • ASQ certification is preferred TECHNICAL SKILLS • Blueprint reading and interpretation, • Gage design knowledge, • APQP, • MSA, • PPAP, • SPC, • GD & T, • Automated inspection software, • Lean, • Six Sigma, • MS Office Suite OTHER SKILLS • Manual dexterity, • Spatial dexterity, • Problem solving, • Root cause analysis, • Corrective Action, • Multitasking, • Written communication, • Verbal communication, • Organizational skills, • Time Management While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must frequently lift, push, pull, carry and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions and odors, dusts, mists, fumes and/or airborne particles. The noise level in the work environment is usually moderate.

Job DescriptionDescriptionCME Associates is seeking a Senior Mechanical Engineer to join our growing team in East Brunswick, NJ. In this role, you will oversee the design and implementation of mechanical systems, including HVAC, plumbing, and fire protection, across a wide range of projects such as county and municipal facilities, schools, water treatment plants, wastewater treatment plants, and other infrastructure developments. This is an opportunity to step into a high-impact leadership role, working closely with clients while mentoring a team of junior engineers and helping drive projects from design through construction. If you enjoy hands-on engineering work, solving complex infrastructure challenges, and guiding younger engineers, this role offers both technical depth and leadership opportunity. What You’ll Work On Projects span a range of public and institutional facilities, including HVAC system upgrades, fire protection and plumbing systems, and mechanical improvements for schools, municipal buildings, and infrastructure facilities. You’ll help bring several active projects across the finish line while also contributing to new designs and future initiatives, working closely with clients, contractors, and multidisciplinary engineering teams. ResponsibilitiesMechanical System Design • Conduct feasibility studies to evaluate project requirements, technical constraints, and cost implications., • Lead the design of HVAC, plumbing, and fire protection systems, • Perform system sizing, load calculations, and equipment selection, • Prepare drawings, specifications, and construction documentsProject Leadership, • Manage multiple projects at various stages of completion, • Coordinate closely with architects, civil engineers, and electrical engineers, • Serve as a key technical contact for clients and project partnersConstruction & Implementation, • Review shop drawings, equipment submittals, and contractor documentation, • Conduct site visits and inspections to evaluate system conditions, • Support commissioning, troubleshooting, and final system performanceTeam Mentorship, • Provide technical guidance to junior mechanical engineers, • Support quality control and knowledge sharing across the team Qualifications • Bachelor’s degree in Mechanical Engineering or related field, • 10+ years of mechanical engineering experience, • Strong experience designing HVAC systems, • Experience with plumbing and fire protection systems, • Experience working on municipal, institutional, or infrastructure projects, • Ability to manage multiple projects and coordinate with clients and contractorsPreferred, • Professional Engineer (PE) license (NJ preferred), • Experience with AutoCAD or Revit, • Knowledge of ASHRAE and NFPA codes, • Experience with facility upgrades, school renovations, or treatment facilities BenefitsCME offers a competitive compensation package including: medical, prescription, dental and vision coverage, 401(k) retirement plan with employer match, educational assistance program and paid time off.

Job Description Summary We are currently representing a well-established civil engineering and infrastructure design firm seeking a Senior Civil Engineer with a minimum of 7+ years of experience in highway design, infrastructure improvements, and DOT projects. Based out of their Edison, NJ office, this individual will play a key leadership role in the planning, design, and delivery of transportation projects across New Jersey and the greater Northeast region. This position is ideal for someone with strong technical capabilities in roadway/highway engineering, a deep understanding of DOT standards (NJDOT/NYSDOT), and the ability to lead and coordinate cross-functional design teams. Key Responsibilities Lead and manage highway and roadway design projects for public sector clients (NJDOT, counties, municipalities, etc.) Prepare and review design plans, specifications, and cost estimates for infrastructure improvements Oversee preparation of horizontal and vertical alignments, grading, drainage systems, and utility relocation plans Manage project schedules, budgets, and client communications to ensure on-time delivery Coordinate with internal teams and subconsultants including CAD designers, traffic engineers, and permitting specialists Provide quality control for engineering documents and ensure compliance with agency standards Mentor junior engineers and support staff, including assigning tasks and overseeing technical development Support proposal development and business development efforts for highway/infrastructure pursuits Attend project meetings, site visits, and coordinate with DOT and municipal reviewers as needed Project Types Include: Highway and roadway rehabilitation Intersection improvements and traffic flow enhancements Site planning and civil infrastructure for public sector developments Streetscape and ADA compliance upgrades Utility coordination and relocation Stormwater and drainage systems Occasional bridge approach work or coordination with structural teams Qualifications Bachelor’s degree in Civil Engineering (Master’s preferred) 7+ years of experience in civil engineering focused on highway, infrastructure, and transportation projects EIT or PE license preferred (New York or New Jersey preferred or ability to obtain) Extensive knowledge of NJDOT, NYSDOT, or similar DOT agency standards and processes Proficient with civil design software including MicroStation, InRoads, AutoCAD Civil 3D Familiarity with stormwater, permitting, and utility relocation Strong leadership, coordination, and communication skills Experience mentoring and managing junior staff is a plus Compensation & Benefits Competitive salary based on experience Medical, dental, and vision insurance 401(k) with company match Paid holidays, vacation, and sick time Hybrid work schedule Career advancement and continuing education opportunities

Job Description Job Summary: Karbon Engineering has an outstanding opportunity for a talented and motivated Mechanical or Electrical Commissioning Engineer. Candidates must have 2-6 years of experience in operation / testing of: Mechanical Candidate: HVAC systems including water-cooled or air-cooled chiller plants, primary-secondary pumping systems, variable-flow primary-only pumping systems, air handling units, fans and control systems or equivalent mechanical systems. Electrical Candidate: UPS Systems, Generators, Switchgear Controls Must have good communication skills, be computer literate and be able to travel. Experience with Facility Grid a plus. Bachelor’s degree is desirable; equivalent experience will be considered. Responsibilities: Responsibilities include preparation of commissioning plans, pre-functional checklists and test procedures; performing construction inspections, testing equipment and systems, report writing, running meetings and discrepancy resolution. Company DescriptionKarbon Engineering is a professional engineering firm that specializes in HVAC, Electrical Power, Fire Protection, Plumbing, Sustainable Design, and Commissioning of critical facilities and data centers. The position will be based out of the New Jersey/New York/Pennsylvania area. As an equal opportunity employer, Karbon Engineering invites resumes from all interested parties. Please submit your resumes to careers@karbonengineering.comKarbon Engineering is a professional engineering firm that specializes in HVAC, Electrical Power, Fire Protection, Plumbing, Sustainable Design, and Commissioning of critical facilities and data centers. The position will be based out of the New Jersey/New York/Pennsylvania area.\n \nAs an equal opportunity employer, Karbon Engineering invites resumes from all interested parties.\nPlease submit your resumes to careers@karbonengineering.com

Job DescriptionCompany Description BEUMER Group is an international leader in intralogistics, specializing in conveying, loading, palletising, packaging, sortation, and distribution technology across a wide range of industries, including airports, e-commerce, warehousing & distribution, and bulk material handling. We offer the right solution for nearly every logistics challenge. As a family-owned company, BEUMER combines tradition with innovation. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Electrical Project Engineer is a hands-on role responsible for supporting, maintaining, and enhancing BEUMER’s installed electrical systems across customer sites. This position applies professional electrical engineering knowledge to service-based projects, including system upgrades, retrofits, troubleshooting, and performance improvements for sorters, palletizers, stretch hoods, and conveyor systems. This role is critical in ensuring system reliability, safety, and long-term performance, working closely with Customer Support, Field Service, Engineering, and customers to deliver lifecycle value and technical excellence. Responsibilities: • Design and/or modify electrical systems for existing BEUMER equipment, including sorters, palletizers, stretch hoods, and conveyors, with a focus on upgrades and retrofits., • Review and interpret electrical design drawings and specifications for installed systems, including customer-provided and legacy documentation., • Evaluate and validate electrical designs and documentation from suppliers for service-related projects., • Support on-site personnel during installation, commissioning, troubleshooting, and system optimization activities., • Diagnose and resolve electrical issues in live operational environments, minimizing downtime and ensuring system performance., • Provide technical consultation and guidance on electrical challenges encountered in the field., • Prepare and maintain accurate service-related documentation, including as-built drawings, specifications, and change records., • Develop bid specifications and scopes of work for electrical upgrades, retrofits, and panel modifications., • Travel to customer sites to support and supervise electrical installation, modification, and validation activities., • Support Project Managers in planning and executing service projects, including schedule development and tracking., • Participate in project reviews and follow-up on action items related to service engineering initiatives., • Coordinate with procurement and planning teams to source materials and resources for service and retrofit projects., • Visit job sites to assess system conditions, validate field changes, and support engineering decisions., • Ensure compliance with applicable electrical codes, standards, and BEUMER engineering practices., • Identify and implement opportunities for cost optimization, reliability improvement, and service execution efficiency., • Support root cause analysis and implement corrective actions to prevent recurrence of system issues. Compensation range: $112,000.00 - $122,000.00 Annually The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications Skills and Abilities: • Bachelor’s or Master’s degree in Electrical Engineering (or equivalent experience)., • Relevant experience in electrical engineering within material handling, automation, or service/support environments preferred. • Minimum 5 years of relevant experience in controls engineering, preferably within service or support environments. Technical Knowledge: • Strong understanding of advanced electrical engineering concepts and system design., • Experience with power distribution, control panels, cabling, and industrial electrical systems., • Knowledge of applicable electrical codes, standards, and regulations., • Familiarity with automated systems such as conveyors, sortation, and related equipment., • Proficiency with computer-based engineering and design tools. Core Competencies: • Ability to evaluate and resolve electrical engineering issues independently in time-sensitive, operational environments., • Strong troubleshooting and analytical skills with a focus on root cause analysis and long-term solutions., • Ability to review and validate technical work to ensure compliance with standards and best practices., • Adaptability to evolving technologies and system platforms., • Ability to coordinate across engineering, service, and customer teams. Professional Skills: • Excellent time management and attention to detail., • Strong verbal and written communication skills, particularly in customer-facing situations., • Ability to manage multiple priorities and perform effectively under pressure., • Professional, proactive, and customer-focused mindset., • Collaborative team player with strong interpersonal skills., • Willingness and ability to travel to customer sites as needed (typically up to 25%). Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential., • Per Diem Eligibility: Allowances in accordance with the IRS schedule for qualified travel expenses Equal Opportunity Statement: BEUMER is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, sex (including pregnancy and breastfeeding), gender, affectional or sexual orientation, gender identity or expression, transgender status, national origin, age, ancestry, disability (mental or physical), veteran status, genetic information, atypical hereditary cellular or blood trait, marital status, civil union status, domestic partner status, or any other status protected under local, state or federal laws - prohibits discrimination, harassment, and retaliation in all aspects of employment. This commitment applies to recruitment, hiring, training, promotion, compensation, benefits, discipline, termination, and all other terms and conditions of employment. By accepting an offer of employment with BEUMER, the employee agrees to abide by all policies and practices that promote a workplace free from discrimination and harassment and acknowledges BEUMER’S commitment to diversity and inclusion.

Job DescriptionCompany Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of conveying, loading, palletising, packaging, sortation and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description BEUMER Group is an international manufacturing leader in intralogistics in the fields of material handling, conveying, loading, palletizing, packaging, sortation, and distribution technology. BEUMER Group offers the right solution for almost every logistic challenge. We are a family owned, intralogistics leader, where tradition and innovation go hand in hand. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Project Manager role in the Products line of business is a hands-on position requiring excellent project management, technical, organizational and communication skills. This position is responsible for the planning, management, and execution of the Products segment within North America in the applicable industries such as cement, building materials, alternative fuels and raw materials, consumer goods, and petrochemical industry. Primary Responsibilities • Early engagement with the Sales and engineering team during tendering / sales phase, • Execution of new sales projects from contract signed to handover to customer as well as BEUMER's Customer Support department., • Managing a portfolio of projects in different industries – ranging from $ 50,000 to approx. $ 5,000,000 within the Product Business CoC network. • Organizing the projects through the BEUMER Stage Gate model with planning, specifications, design, production, installation/commissioning planning and agreements to execute within the agreed time frame., • Proactive and effective communication with customers, stakeholders, and the project team to ensure transparency, clarity and commitment throughout the project., • Lead a multi-disciplined project team throughout the complete project life cycle in coordination with other entities across BEUMER Group., • Mange key project management processes such as Scope/requirements management, Supply chain management, change management, risk management, etc., • Being proactive, identify, and manage opportunities and risks continuously with the right engagement level of the project stakeholders, manage potential back charges and claims and create essential documentation., • Responsible for the overall project delivery, quality/capacity wise, technically, time frame and financially., • Develop and update project schedule, • Create financial reporting and control the project budget, • Technical clarification with the project engineering team and support to site during installation, commissioning, and final testing., • Compiling report, track project tasks, update monthly status reports, • Coordination and preparation for meetings with customers as well as for internal alignment / reporting, • Follow up on action points and expedite critical activities, • Keep project documents updated and manage changes with the project team, • Support the QSHE department to ensure project health, safety and environmental standards meet or exceed legislated requirements and company policy., • Efficiently close out projects incl. making sure all customer documentation is created and stored and the projects are completely closed in the system., • Visit construction site for progress meetings with the customer and suppliers if required. Salary range: $100,000.00 - $110,000.00 annually Qualifications • Min. Bachelor's degree in engineering; mechanical, electrical, software, construction management, or similar technical field. Alternatively, at least 5 years of relevant industrial PM experience., • Project management experience with delivering projects, preferably in the mechatronic/industrial automation industry., • Strong technical background (electrical, mechanical-, marine engineer or similar), • Strong contractual and commercial knowledge and experience to manage projects as per project´s contractual agreement and commercial terms and conditions, • Process oriented and able to implement project management processes based on PMO standards., • Skilled project manager with cross-cultural understanding and good interpersonal, communication and collaboration skills., • Hands-on approach, with the ability to motivate others toward success., • Excellent report writing and presentation skills., • Essential skills include planning and budgeting, project administration, and decision-making / creative problem-solving skills., • Work closely with team members and decision makers to identify, recommend, develop, implement, and support cost-effective project delivery., • Able to interface with all members of the organization in a professional, calm, helpful and courteous manner – including Senior Executive Management, Project Management, engineering, supply chain and external stakeholders., • Strong, independent decision-making ability. Self-starter and possess a strong work ethic with a self-imposed desire to exceed everyday expectations., • Participate in required on-going technical training to be a systems subject matter expert., • Must be willing to travel and work as part of a global team of professionals as required (up to 25 % of the time)., • PMP Certification is required or must obtain PMI/PMP Certification within one year of hire. Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential. BEUMER is an equal opportunity employer and affords equal opportunity to all applicants and employees for all positions without regard to race, color, religion, gender, national origin, age, disability, veteran status or any other status protected under local, state or federal laws.

Job Description Position Overview Harris Energy Solutions (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, and Building Retro-Commissioning. We pride ourselves in the work we perform and the services we provide. HES is hiring a Senior Energy Engineer with proven proficiency in Energy Audits & Commissioning work to join our team. Proficiency in Energy Audits & Commissioning work is a mandatory requirement for this role. Candidates without direct Energy Audits & Commissioning work experience will not be considered. Responsibilities • Energy Modeling, • Lead the development and implementation of advanced energy models to support forecasting, scenario analysis, and energy market strategies., • Oversee the modeling team, ensuring accuracy, efficiency, and alignment with company goals., • Collaborate with cross-functional teams to integrate modeling insights into broader company initiatives., • Perform drawing reviews to identify applicable building components, • Compile data for inputs into building energy modeling software, • Execute building modeling, • Perform ASHRAE Level I/II/III Energy Audits, • Analyze utility bills and drawings to identify building energy consumption, • Conduct onsite energy audits of complex building systems, • Identify Energy Conservation Measures, • Perform energy savings and cost analyses for projects, • Generate a technical report for deliverables to clients, • Supervise energy services personnel, which includes work allocation, training, promotion, and enforcement of internal procedures and control, and problem resolution; evaluate performance and make recommendations for personnel actions; motivate employees to achieve peak productivity and performance Requirements • Proficiency in Energy Audits & Commissioning work is required. Candidates without demonstrated experience in Energy Audits & Commissioning work will not be considered., • A valid Professional Engineer (PE) license, • Bachelor's degree in Engineering (Mechanical, Electrical, or Facilities), • 6 years of experience in the Energy Engineering field, • Experience with building energy modeling techniques, • Proficient in Microsoft Office, • Understanding of energy efficiency technologies, HVAC systems, and renewable systems, • Experience with large commercial and multi-family buildings, • Ability to travel throughout the United States Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and without a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time (40 hours per week) Pay: $100,000.00 - $120,000.00 per year Benefits: • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule: 8 hour shift Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job DescriptionSummary We are representing a well-established civil engineering firm focused on transportation infrastructure projects across the Northeast. Due to a growing backlog of roadway and bridge work, they are seeking a Senior / CAD Designer with 5+ years of experience supporting civil and transportation design teams. This role is ideal for a CAD professional with a strong background in highway, roadway, and bridge projects who can produce detailed construction drawings with minimal oversight and work closely with engineers on DOT and public infrastructure projects. Key Responsibilities Support civil, roadway, and bridge design teams in producing construction-ready CAD drawings Develop detailed plans, profiles, sections, and details using MicroStation, InRoads, and AutoCAD Assist with civil site design including roadway layout, grading, utilities, drainage, and stormwater systems Support structural and bridge drafting for new bridges, rehabilitations, culverts, and land rating Incorporate engineer redlines and ensure drawings meet agency and internal CAD standards Prepare traffic control plans, utility relocation layouts, and construction support documents Maintain drawing organization, version control, and submittal deadlines Collaborate with multidisciplinary teams and assist in mentoring junior CAD staff Contribute to 3D modeling or visualization efforts as needed Project Exposure May Include Roadway and highway design Civil site design and permitting Utility design and relocations Traffic control and streetscape plans Stormwater and hydraulic systems Bridge design, rehabilitation, and culverts Public infrastructure and DOT projects Qualifications 5+ years of professional CAD drafting/design experience in civil, transportation, or bridge projects Strong proficiency in MicroStation, InRoads, and AutoCAD Experience supporting DOT or public agency projects preferred Familiarity with NJDOT, NYSDOT, or similar agency standards a plus Ability to work independently and communicate effectively with engineers and project managers Strong attention to detail, organization, and time management Associate degree or technical certification in CAD or drafting preferred Compensation & Benefits Medical, dental, and vision insurance 401(k) with company match Paid vacation, sick time, and holidays Career development and training support Hybrid schedule: 3 days in office, 2 days remote

Job Description Attalon is a leading technology partner to the global aerospace and defense industry, specializing in the physics of light and heat. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Summary: Attalon is seeking a Principal Electrical Engineer to design complex system circuit boards required in challenging products for the Aerospace and Defense industry. Responsible for both system level and detailed circuit design, modeling, and simulation for laser-based products. Circuit designs will include laser diodes, photodetectors, modulator drivers, TIAs, temperature controllers, clock generators, matched RF signals and FPGA complexes. Primary Duties & Responsibilities: • Drive the electrical architecture of system circuit boards to meet customer specifications with minimal oversite., • Design high-density multi-layer PCBAs from initial concept to completion., • Execute circuit designs that utilize a high degree of E/O and O/E functions., • Create schematic drawings/BOMs., • Work with circuit layout and board assembly subcontractors., • Perform electrical simulations and power analysis., • Support customer reviews required to pass design development gates., • Execute the integration of electronics, FPGAs and software/firmware supporting all phases of testing., • Develop test specifications and bring up work instructions for designs, • Collaborate with cross-functional teams consisting of optical, mechanical and system engineers., • Participates in writing proposals, providing cost and schedule estimates in support of new business. Education & Experience: • Bachelor’s degree in electrical/electronic engineering with 9+ years of circuit design experience or Master’s degree with 7+ years’ experience, or Ph.D. with 4+ years’ experience Skills Required: • Proven expertise in designing high density multi-layer PCBAs., • Strong RF fundamentals and analog circuit design skills required., • Background in circuit theory, control loops, high-speed DACs/ADCs, and mixed-signal design., • Experience with programmable logic devices and control system circuit design., • Experience managing noise, jitter, crosstalk, signal integrity on PCB designs., • Use of schematic capture tools (Altium, Orcad) and simulators, • Familiar with PCB layout browsers (Altium, PADS, Xpedition)., • Self-motivated, responsible and team player. Desired: • Design experience with switching power supplies, TEC controllers, laser diode drivers and photodetectors strongly desired., • Background in RF signal processing and/or optical fiber system design., • Experience with RF circuit board design for isolation with high-speed small signals and decoupling of high-speed digital lines for A/D and D/A circuits., • Mixed Signal and matched 50/100 ohm microstrip and strip line design practice., • Knowledge of circuit board thermal and EMI management, and ESD protection, • Experience with government defense design processes. Equal Opportunity Employer Statement: Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance: This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job Description Electrical Engineer - Pharmaceutical Manufacturing The Opportunity We're looking for an experienced Electrical Engineer to support critical infrastructure within a pharmaceutical manufacturing environment. This is a hands-on role for someone who knows electrical systems deeply and thrives in a fast-paced, highly regulated setting where uptime and compliance aren't optional. What You'll Do Own maintenance and reliability of high voltage, low voltage, and power distribution systems including panels and sub-transformers Execute preventive maintenance, calibration, and validation programs on time and to GMP standards Lead electrical installation and retrofit projects from scope through commissioning Partner with cross-functional teams to specify, procure, and commission equipment Manage vendor relationships, service agreements, and spare parts inventory Support regulatory inspections, audits, and change control processes Respond to electrical and utility breakdowns with urgency What You Bring Bachelor's degree in Electrical Engineering 6+ years of experience in electrical engineering within pharma or regulated manufacturing Strong knowledge of high/low voltage systems, utilities, and power distribution Working knowledge of NEC (NFPA 70), NFPA standards, and OSHA electrical safety requirements Familiarity with 11kVA systems and high voltage operations Ability to read electrical schematics, P&IDs, and construction blueprints Experience with regulatory inspections and GMP compliance Proficiency in AutoCAD and Microsoft Office Self-starter with strong communication skills and calm under pressure

Job Description Who We Are… Since our founding in 1901, Limbach’s primary core value has always been: We Care. We are committed to creating a culture of belonging for our employees, our We Care culture, and our industry as a whole. Limbach Company LLC, a subsidiary of Limbach Holdings, Inc., (NASDAQ: LMB) is an integrated building systems solutions firm whose expertise is the design, installation, management, service, and maintenance of HVAC, mechanical, electrical, plumbing and control systems. We engineer, construct, and service the mechanical, plumbing, air conditioning, heating, building automation, electrical and control systems in both new and existing buildings and infrastructure. We work for building owners in the private, not-for-profit, and public/government sectors. Our vision is to create value for building owners targeting opportunities for long term relationships. Our purpose is to create great opportunities for people. We carry out our vision and purpose through a commitment to our four core values… • We Care, • We Act with Integrity, • We Are Innovative, • We Are Accountable The Benefits & Perks… (Available on 1st Day of Employment) • Base Salary - $125,000 - $145,000, • Full portfolio of medical, dental, and vision benefits., • Industry-leading 401K plan with company match., • HSA, FSA, and life insurance offerings., • Flexible work schedules with a focus on work/life balance., • Robust learning & development program., • Career pathing flexibility. Who You Are… As Special Projects Manager, you will be responsible for managing and operating the Special Projects in accordance with annual operating and growth objectives. This Position… Some examples of the work you might do includes: • Assumes responsibility for achievement of the department’s annual sales and operating income goals., • Prospects and establishes new customers by promoting the key capabilities of the Company., • Partners with Limbach Collaborative Services (LCS) to perform reviews for value engineering opportunities and develop complete scopes for design-assist or design-build opportunities., • Provides input on prospective new work and collaborates on cost estimates for selected projects., • Writes bid scope proposals, obtains bid bonds/insurance certificates, and completes customer bid forms., • Reviews bid documents, performs material, labor, and equipment take-offs for trades as required., • Attends pre-bid meetings and project walk throughs to gather information pertinent to site conditions., • Contacts customers/contractors during the bid process to obtain a commitment to perform proposed work., • Executes new contract implementation with customers with the goal of securing repeat, future business., • Tracks and analyzes the department’s accurate job cost, monthly forecasts, billings, and cash collections., • Assembles all necessary documents, estimated information, and calculations into final bids., • Conducts a thorough bid review with peers/management prior to the submission of the project proposal., • Submits project proposals and participates in proposal presentations on an as-needed basis., • Attends scope review meetings, and offers value engineering and breakout pricing, as needed., • Breaks down cost estimates into manageable, measurable segments that allow for accurate cost projections for the lifecycle of a given project., • Trains, develops, and provides feedback to direct reports to facilitate successful attainment of team objectives and adherence to the Required Project Standards (RPS) of the Company., • Executes HR-related decisions (promotions, salary adjustments, corrective actions, etc.) for direct reports., • All other duties as assigned. What You Need… • 5-10 years of hands-on, industry-specific experience required., • Demonstrated ability to engage in effective collaboration and communication (both written and verbal)., • Strong computer skills, including proficiency with Microsoft Office (Excel in particular)., • Capacity to leverage interpersonal skills to develop and enhance business relationships., • Ability to travel locally up to 50% of the time to meet customers, attend meetings, entertain, etc. Preferred Qualifications: • Bachelor’s degree [in a construction-related field] or equivalent preferred., • Extensive HVAC or plumbing background preferred., • Previous experience with CAD and/or project management software preferred. Conduct Standards: • Maintains appropriate Company confidentiality at all times., • Protects the assets of the Company and ethically upholds the Code of Conduct & Ethics in all situations., • Cultivates and promotes the “Hearts & Minds” safety culture., • Consistently exemplifies the Core Values of the Company (we CARE, we act with INTEGRITY, we are INNOVATIVE, and we are ACCOUNTABLE). Work Environment: • This position operates primarily in a professional office environment, and routinely utilizes standard office equipment, such as computers, phones, copiers, and filing cabinets., • Work tasks may occasionally necessitate travel to local job sites, which means intermittent exposure to the conditions typically associated with a construction site. Physical Demands: • In performing the duties of this job, the incumbent is regularly required to walk, talk, stand, hear, perform repetitive motion, and possess an appropriate degree of both visual acuity and manual dexterity., • This is considered a sedentary work position, which means possible exertion up to ten (10) pounds of force occasionally, and/or negligible amount of force frequently or constantly to lift, carry, push, pull, or otherwise move objects. This job description is intended to describe the general nature of work being performed by the individual who assumes this role, not an exhaustive list of responsibilities. Duties, responsibilities, and activities may change at any time, with or without notice, as business needs dictate. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position. Limbach Facility Services LLC is an Equal Opportunity Employer.

Job DescriptionCompany Description BEUMER Group is an international leader in intralogistics, specializing in conveying, loading, palletising, packaging, sortation, and distribution technology across a wide range of industries, including airports, e-commerce, warehousing & distribution, and bulk material handling. We offer the right solution for nearly every logistics challenge. As a family-owned company, BEUMER combines tradition with innovation. We are proud of what our employees create each day. Integrity, Inspiration, Quality and Teamwork! Job Description The Mechanical Project Engineer is a hands-on individual with the maturity and experience to drive engineering projects from start to finish. This position requires good technical, organizational and communication skills to develop material handling systems. An ideal candidate will have previous mechanical design experience broadened by recent system projects in the material handling industry. The Mechanical Project Engineer reports directly to the Mechanical Engineering Manager. In addition, he/she will work closely with Sales, Project Management, Purchasing and installation personnel on a daily basis. Primary Responsibilities: • Assist Sales in the creation of equipment proposals by providing engineering analysis and design expertise., • Assist Project Managers with system commissioning and field support., • Evaluate and understands project requirements to plan execution of components design and select system components., • Evaluate manufacturing feasibility, estimate cost, and assess maintenance requirements of a variety of material handling systems., • Design systems layout and specific components on 2D and 3D CAD equipment and software Our products could include steel structures, sheet metal parts, mechanisms and other Beumer products. Optimize for cost, functionality and manufacturability, • Write specifications, user’s manuals, and enter other data to fully document engineering designs., • Coordinate, and monitor all aspects of production, including selection of manufacturing methods, fabrication. Assist procurement with parts ordering and supplier selection., • Ability to coordinate the efforts between different fields of engineering, purchasing, project management and site integration, • Maintain accurate records and prepare a variety of meeting notes, letters and technical reports that are clear and concise, • Ability to successfully define technical scope of work for the purchase of sub-systems or components, • Ability to make technical decisions for optimum end results, • Ability to present technical solutions for both internal and external stake holders, • Be able to take lead on multiple logistic projects at the same time., • Be able to lead project worth up to 30 mil. USD Compensation Range: 102,000-112,000 Annually The posted salary range reflects the compensation the company reasonably expects to offer for this position. Actual compensation will not be less than the posted minimum and will be based on multiple factors. Qualifications Requirements / Skills / Abilities: • A Bachelor Degree in Mechanical Engineering and related field or equivalent experience, • 6 to 10 years of hands-on experience in a manufacturing and project engineering settings. Preferred experience in design of automated machines and material handling capital equipment, • Prefers a broad background in various machine technologies (control, pneumatic, hydraulic), • Proficient in 2D and 3D modeling CAD design programs, • Ability to analyze and design basic mechanical components by applying knowledge of mechanical engineering, • Ability to specify mechanical, pneumatic and hydraulic components, • Good knowledge of drafting, dimensioning, tolerancing and manufacturing processes, • Excellence in time management; attention to detail and the ability to learn quickly, • Excellence in communication (both verbal and written), • Professional, positive, and have an energetic attitude-excellent interpersonal skills. Self-motivated, trustworthy, and respectful of others, • Ability to travel both domestically and internationally as needed, up to 20%., • Excellent listening skills, • Be able to apply engineering principles and practices to the solution of advanced mechanical engineering problems, • Good Understanding of IBC and OSHA requirements for Material Handling Equipment, • Effective use of project engineering tools, • Expertise of electrical motors, pneumatics, hydraulics and power transmission techniques, • Ability to lead prototype testing efforts of various Material Handling Equipment components and come up with technical solutions Additional Information BEUMER is an innovative company, where every employee is part of the "family". Because our employees are our most important asset, here are some of benefits we currently offer full-time employees. • Medical & Dental Premiums: We cover 100% of the premiums for you and your eligible dependents., • 401(k) with Generous Match: Secure your financial future with our competitive retirement plan., • Life Insurance / Long Term Disability: Peace of mind for you and your loved ones. Yes, we cover that too!, • Ancillary Insurances: Including vision, accident, and critical illness insurance., • Generous Paid Time Off: Achieve the optimal work-life balance., • Company Holidays: Enjoy paid time off on designated company holidays including additional flex days for times that matter most!, • Performance-Based Bonus: Eligibility to participate in our Target Agreement Plan for bonus potential., • Per Diem Eligibility: Allowances in accordance with the IRS schedule for qualified travel expenses. BEUMER is committed to providing equal employment opportunities to all employees and applicants for employment without regard to race, color, creed, religion, sex (including pregnancy and breastfeeding), gender, affectional or sexual orientation, gender identity or expression, transgender status, national origin, age, ancestry, disability (mental or physical), veteran status, genetic information, atypical hereditary cellular or blood trait, marital status, civil union status, domestic partner status, or any other status protected under local, state or federal laws. prohibits discrimination, harassment, and retaliation in all aspects of employment. This commitment applies to recruitment, hiring, training, promotion, compensation, benefits, discipline, termination, and all other terms and conditions of employment. By accepting an offer of employment with BEUMER, the employee agrees to abide by all policies and practices that promote a workplace free from discrimination and harassment, and acknowledges BEUMER’S commitment to diversity and inclusion. All your information will be kept confidential according to EEO guidelines.

Job Description The Process Engineer ensures manufacturing processes are efficient, cost-effective, compliant with MICRO’s quality standards, and capable of consistently producing products that meet customer specifications. JOB OUTCOMES The Process Engineer will: · Lead projects that deliver measurable improvements in process efficiency, product quality, and cost reduction across assigned manufacturing areas. · Act as a Subject Matter Expert (SME) to resolve complex technical challenges, optimize process performance, and support cross-functional teams. · Drive sustainable process improvements through data-driven decision-making, root cause analysis, and the implementation of corrective and preventive actions. · Ensure that manufacturing processes consistently meet internal quality standards and customer specifications while remaining scalable and cost-effective. ESSENTIAL DUTIES AND RESPONSIBILITIES Process Improvement – 60% • Lead or actively contribute to cross-functional project teams focused on improving process efficiency, product quality, and cost performance., • Recommend and implement improvements to equipment, tooling, and work methods to increase throughput and optimize resource utilization., • Collaborate in the design and specification of new equipment and tooling to meet production and quality requirements., • Support the installation, testing, and optimization of new or modified equipment to ensure successful integration into manufacturing operations., • Assist in developing and refining manufacturing processes to improve repeatability, yield, and operational reliability., • Conduct root cause analyses of process issues and partner with Quality Engineers to implement sustainable corrective and preventive actions. Process Analysis & Documentation – 40% • Collect and analyze production and process data to identify trends, deviations, and improvement opportunities., • Create clear, accurate process documentation including diagrams, workflows, and written instructions., • Draft and revise detailed work instructions and standard operating procedures (SOPs) with input from senior engineers., • Contribute to the development of validation documentation for new parts, design changes, and process updates., • Assist in managing nonconforming material by documenting issues, coordinating evaluations, and supporting disposition activities., • Interpret and apply tools such as Process Flow Diagrams (PFDs), Failure Mode and Effects Analyses (FMEAs), and Process Control Plans (PCPs) to ensure process control and risk mitigation. TALENT MANAGEMENT This position has no talent management responsibilities. QUALIFICATIONS EDUCATION AND EXPERIENCE · Bachelor’s degree in Engineering or a related field is required. · At least 4-6 years of engineering experience is required. LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · Blueprint reading · Geometric Dimensioning and Tolerancing (GD&T) · Statistical Process Control (SPC) · Measurement Systems Analysis (MSA, GR&R) · Design of Experiments (DOE) · Statistical software systems · ERP · Minitab Statistical Software · Metal fabrication · Medical device manufacturing · MS Office Suite OTHER SKILLS · Verbal communication · Written communication · Organizational skills · Problem solving While performing the duties of this Job, the employee is regularly required to sit; and talk and hear. The employee is frequently required to stand; walk; use hands to touch, handle, or feel and reach with hands and arms. The employee must lift, push, pull, carry and/or move up to 10 pounds frequently, and between 10 and 25 pounds occasionally. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to vibration. The employee is occasionally exposed to wet and/or humid conditions; risk of electrical shock; and odors, dusts, mists, fumes and/or airborne particles. The noise level in the work environment varies from moderate to loud, based on the department/ work area.

Job DescriptionEG&R Engineering PC is a fast-growing multi-disciplinary engineering firm located in Cranbury, NJ. EG&R provides electrical, mechanical, environmental and geotechnical engineering services for a variety of markets including government, utilities/power, waste to energy companies, transit agencies, manufacturing industries, pharmaceuticals, A-E firms/Architects, contractors and various types of commercial clients. EG&R is seeking a Lead Electrical Engineer who is self-motivated and ready to contribute to the future success of EG&R Engineering PC. If you are interested in becoming an integral part of our team, please forward your resume to careers@egrengineering.com. Responsibilities: Main responsibilities include creating electrical protection & control and/or physical layout design deliverables for Power Plants and Substations. • Prepare electrical schematics, single lines, calculations, and specifications for the design of electrical distribution systems for Power Plants and Substations., • Supervise and Coordinate Electrical Engineers and Designers in day to day tasks to support project needs., • Review and support the preparation of physical substation design, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material is required., • Develop protection and control designs including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring as required., • Prepare calculations for studies and reports (grounding, lighting protection, AC/DC load studies, etc.), • Prepare equipment specifications for procurement, • Provide short term field support during construction Qualifications: • Must be authorized to Work in the United States. We do not provide Visa sponsorship., • 4 to 8 years of experience in Engineering and Design for Substations and/or Power Plants, • Bachelor of Science/Master’s degree in electrical engineering (Power Distribution/Power Systems) from an accredited institution., • Desire to obtain Engineer-in-Training (EIT) certification and ultimately Professional Engineer (PE) license, • AutoCAD and/or Microstation experience, • Proficiency with National Electrical Safety Code and IEEE / ANSI Standards, • Strong problem solving, organizational, and interpersonal skills., • Aptitude to work in a team environment, • Excellent written & verbal communication skills, • Strong management skills and a desire to grow professionally, • Capability of solving difficult problems that require adaptation and modification of standard approaches, techniques, procedures and criteria

Job Description Join Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees. Responsibilities Priorities can often change in a fast-paced environment like ours, so this role includes, but is not limited to, the following responsibilities: • Support major projects involving the planning, design, and startup of water and wastewater treatment systems with a focus on process, pump stations, large diameter pipelines, biosolids, and odor control systems., • Work within project teams to complete projects to exceed client expectations for approach, scope, budget and schedule., • Demonstrate technical excellence in the performance of project assignments including planning, design and preparation of bid documents, project management, regulatory coordination, and construction services., • Assemble and present written recommendations on technical matters and prepare reports., • Inspect, test and evaluate collection, conveyance, distribution, and treatment systems and processes. Requirements Essential Skills and Experience: • Bachelor’s Degree in Civil, Environmental, Chemical, Mechanical, or Civil Engineering, • 1-5 years of experience in water and wastewater consulting field, • Registration as licensed Engineer-in-Training or ability to obtain within 18 months of hire, • Prior experience in water and wastewater pipeline, pump station, and treatment facility design, rehabilitation, and construction, • Prior experience in process equipment selection, design and startup for pump stations, treatment plants and biosolids processing facilities., • Ability to prepare reports; evaluate pipelines, pump stations and/or treatment plants; and prepare design documents, • Familiar with environmental rules and regulations in the water and wastewater field, • Proficiency with AutoCAD and computer modeling for water systems, open channel flow, and sanitary/storm water systems and other computer applications, • Excellent oral and written communication skills, • Curiosity and interest in continuous learning in AI and comfort experimenting and iterating quickly; uses data to validate ideas and measure impact., • Commitment to ethical and responsible AI adoption, including privacy-by-design and safe use of tools.Company DescriptionJoin Our Growing Team CSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume. Our Success For more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact. Social Commitments One of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.Join Our Growing Team\r\n\r\nCSA provides the ideal place for you to develop or start your career in a fast-paced, diverse environment. At CSA Group, one of our guiding principles is to treat people with respect, and we appreciate diversity in their backgrounds, experiences and opinions. If you think you have what it takes to be an industry leader, send us your resume.\r\n\r\n\r\n\r\nOur Success\r\n\r\nFor more than 65 years, CSA Group has contributed to developing stronger, more resilient facility and infrastructure solutions. Our experience brings plenty of opportunities for you to expand your skill set, challenge yourself, and make an impact.\r\n\r\n\r\n\r\nSocial Commitments\r\n\r\nOne of CSA Group’s most important Guiding Principles is our commitment to contribute to the industries we serve and the communities we live in. This translates into active involvement in a variety of activities and organizations, which provide many opportunities for education and growth for our employees.

Job DescriptionSeeking experienced Engineer with extensive hands-on skills in implementing electrical and automation projects. Position will include developing and managing capital expense projects (CAPEX) from inception to completion. The candidate will support process optimization efforts throughout the facility. Ideal candidates should have hands-on experience troubleshooting technical issues related to industrial and manufacturing equipment. This position requires a strong understanding of safety policies and standards that are applicable for industrial operations. The Engineer will be leading and participating in many team orientated work groups. DUTIES / RESPONSIBILITIES • Provide technical coordination and support in the operating and capital expense management processes by initiating and running projects using the capital expense (CAPEX) project, equipment monitoring, stabilization, and improvements., • Responsible for detailed engineering work in the areas of instrumentation, PLC, power distribution, and equipment integration which includes electrical design, power distribution design, and automation system design., • Provide Technical Support for Operations working closely with leaders on Operational Improvements., • Trouble Shooting of Existing Equipment and Processes., • Develop and refine engineering procedures., • Process sample and data collection and interpretation. REQUIREMENTS / QUALIFICATIONS • Bachelor of Science Degree in Electrical Engineering, • 3-8 Years of Industrial, Hands-On Experience planning and installing electrical equipment and automation controls., • ISA Certified Automation Professional Certification (Preferred), • Demonstrated project management experience which includes planning, budgeting, design, execution, scheduling, procurement, installation and startup of electrical controls equipment and instrumentation., • Experience in troubleshooting and optimizing the performance of electrical control systems on production machines and equipment., • Knowledgeable in Industrial Safety and Construction Methods., • Demonstrated advanced skills in all Microsoft software such as Project, Word, Excel, PowerPoint, etc. and advanced drawing skills with Auto-Cad., • Knowledge of equipment, machine design standards and specifications and machine safety design, including ANSI, ASTM, FM, NFPA, and IEC., • Knowledge of NFPA-70 and NFPA-70E., • Knowledge of database systems for process control applications., • Installation and strong programming capability with Rockwell Automation PLC systems., • Working knowledge of automation communication systems., • Installation set up and troubleshooting abilities with AC and DC drives and motors. E04JI800n8pv40942j5

Job Description Job Title: Junior and Senior Electrical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (This is not a remote or hybrid job) Company Overview: BRUNS-PAK, an Information Technology/Data Center Facilities (A/MEP) firm, helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure that support operations in an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices. Artificial Intelligence and High-Performance Compute included. Job Description: BRUNS-PAK is seeking an experienced and highly skilled Senior Electrical Engineer specializing in the design of electrical systems for Data Centers and Mission Critical Facilities. The ideal candidate should possess a solid background in designing appropriately sized Electrical Service, Generators, Switchgear, UPS Systems, transformers, PDU’s, and other Mission Critical equipment, incorporating reliability and redundancy into their designs. Key Responsibilities: • · Design and develop electrical systems for Data Center Facilities, ensuring reliability, redundancy, and efficiency., • · Utilize AutoCAD and potentially Revit for effective design and documentation., • · Apply diversified knowledge of engineering principles and practices to a variety of assignments in related fields., • · Make informed and independent decisions regarding engineering methods and techniques., • · Consult with supervisor on critical issues, new concepts, and policy matters, seeking guidance as needed., • · Develop test procedures and provide support during the commissioning of electrical equipment., • · Develop comprehensive specifications. Qualifications: • · Minimum of 10-15 years of relevant experience in electrical engineering, preferably in the field of Data Center Facilities., • · Junior Electrical Engineer – 10-15 years experience., • · Senior Electrical Engineer – 15+ years experience., • · Proficiency in AutoCAD 2D design is essential, and experience with Revit design is a plus., • · Registration as a licensed Professional Engineer (PE) is usually required for this position (Senior). Requirements: • · Extensive experience in designing electrical systems for Data Center Facilities., • · Strong knowledge of Generators, Switchgear, UPS Systems, Transformers, PDU’s, and other Mission Critical equipment., • · Ability to integrate reliability and redundancy into electrical system designs., • · Excellent problem-solving skills and ability to apply engineering principles to diverse assignments., • · Ability to effectively communicate technical solutions to diverse audiences both orally and in writing. Work Schedule: Normal business hours are Monday thru Friday 8-5pm. This role requires project travel. Benefits: • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · Salary is based on skill and experience., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description Attalon / Location Overview Attalon is a leading technology partner to the global aerospace and defense industry, specializing in lasers and precision optics. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Details Attalon is seeking a Principal Laser Systems Engineer to lead the development of advanced lasers for aerospace applications. This engineer will take a lead role in laser systems engineering and system integration and test, including serving as a chief engineer, directing a team of laser experts, supporting program development and capture and serving as a customer-facing expert. Responsibilities • Laser Systems Engineering: Define and ensure compliance with system requirements, playing a key role in the structured decomposition of system-level specifications into sub-system and component specifications. Lead laser architecture development collaboratively with laser team across engineering disciplines and in collaboration with program management. Lead team to ensure that design concepts comply with customer specifications and are technically feasible and implementable., • Technical Leadership: Lead a group of highly skilled optical engineers, coordinating engineering activities within the team and across engineering disciplines. Exhibit a deep understanding of laser physics and engineering, especially for high-power diode-pumped solid-state and fiber lasers. Exhibits strong degree of ingenuity, creativity, and resourcefulness to develop highly advanced technologies, processes, and concepts related to the design, test, and evaluation of high energy laser optical systems. Assist planning of R&D projects, troubleshooting critical processes, solving unusually complex problems, and providing technical expertise and guidance to the organization., • Business Development: Serve as a spokesperson on new business opportunities and specialized projects. Serves as customer interface in meetings and other industry events as required. Lead and write technical proposals for the development of new business and assist in evaluating technical requirements, identifying exceptions, and preparing cost estimates for customer quotes., • Management and personnel development: Serve as a manager and mentor of small team of talented laser engineers whose experiences range from senior chief engineers to new graduates. Minimum Qualifications • B.S. in engineering field and 10-12 years of relevant experience, • Strong demonstrated technical background in lasers and laser technology, especially in high power fiber and diode-pumped solid-state lasers. Expert in laser physics and design. Demonstrated successful development of new, practical, challenging laser designs., • Structured engineering background including familiarity and experience with systems engineering practices for the new product design and development lifecycle, including mission analysis, requirements definition and derivation, establishing error budgets / engineering constraint budgets, interface definition, and tracking compliance progress throughout the development lifecycle., • Familiarity and experience with integration and test of complex laser systems including integration planning and sequencing, diagnostics and troubleshooting, formal verification planning and test design, and development of formal verification and qualification procedures. Preferred Qualifications • M.S. or Ph.D. in optics, applied physics or electrical engineering preferred with 8-10 years of relevant experience. 7+ years managerial and leadership experience., • Familiarity with executing to Department of Defense Contracts as Prime contractor or major Subcontractor is a plus. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job Description Job Title: Senior Mechanical Engineer - Data Center Facilities Job Type: Full-time Job Location: On-Site Edison, NJ (this is not a remote or hybrid job). Company Information: Growing NJ Data Center Information Technology/Design/Engineer Firm that delivers an industry-leading portfolio of consulting, design/build, and commissioning services for organizations seeking to plan and deploy an agile IT infrastructure. Mobile. Social. Big Data. Analytics. Artificial Intelligence/High Performance Compute included. These are the business trends we help clients address. Description of Role: We are seeking a skilled Sr. Mechanical Engineer PE with 7+ year design experience for data center/mission critical project experience working with a team on ongoing and new projects. Individuals must have clear written and oral communication skills, detail oriented and up-to-speed software systems utilized in this field. Working alone or with additional team members with the ability to multi task and work successfully under pressure to achieve client deliverables. Knowledge of Cooling Towers, Glycol Systems, Air Cooling Systems, In Row Cooling, Rear Door Heat Exchange, BMS Control, Plumbing, Fire Protection, AutoCAD. Tasks include but not limited to: • · Professional Engineering design of the mechanical engineering discipline, including HVAC, Plumbing and Fire Suppression., • · Development of design solutions for discipline, using sound engineering principles and practices., • · Providing calculations and related documentation for designs developed and implemented and maintenance of documentation for future reference., • · Evaluation of existing facilities and systems respective to the as-built conditions which affect the design., • · Providing written reports documenting design criteria and other aspects of the design., • · Suggesting alternate solutions based upon life cycle and/or first cost basis with associated budget impacts., • · Coordination of consultant and in-house design and CADD personnel to accurately document the design intent on the construction and bid documents., • · Sealing of permit documents as Engineer of Record. (The company will furnish E & O and liability insurance). Company Insurance coverage will not cover any design for an outside project not related to the Company., • · Other responsibilities normally performed in the execution of mechanical design on a professional level, according to standard industry practices., • · Travel to project job sites will be expected. Skill Requirements: Bachelor’s degree in Mechanical Engineering and Licensed/Registered. Have the ability to interact with the comprehensive multi discipline team on consulting reports, design projects, and construction/commissioning projects. Work Schedule: • This is a full-time job position. In office, not remote or virtual., • Normal business hours are Monday thru Friday 8-5pm., • This role requires project related travel. Benefits: • · Salary is based on skill and experience., • · Comprehensive Benefits which include Medical, Dental, Vision, Life Insurance and paid time off., • · 401K Match to $3,500, • · Performance Awards, • · Longevity Plan, • · Year End Bonuses Subject to Corporate ProfitabilityCompany DescriptionBRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments. We engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.BRUNS-PAK is a New Jersey based data center engineering firm that helps clients strategize, implement, and provision innovative, resilient solutions for mission-critical data center infrastructure. In an always-on world flooded by data and demanding information connectivity through an ever-expanding array of devices, we deliver robust design/build solutions for cloud, colo, datacenter, and edge environments.\r\n\r\nWe engineer solutions that balance ultra-reliability with Quality of Service (QoS) demands, storage challenges, environmental responsibility, energy efficiency, capital expenditure (capex) control, and operational expenditure (OPEX) options. With a legacy of over 6,000 successful data center projects across the United States, Canada, and Europe, BRUNS-PAK’s engineering expertise spans cloud, colocation, on-premises, edge, and hybrid infrastructures.

Job Description The Automation Engineer is responsible for designing, implementing, and sustaining automated manufacturing systems that improve production efficiency, consistency, and cost performance. This role drives automation strategy by identifying capable vendors, developing system concepts, and ensuring successful integration of automation into manufacturing operations. JOB OUTCOMES The Automation Engineer is expected to deliver measurable improvements in manufacturing performance through the successful design, implementation, and support of automation systems. Performance is demonstrated by: • Reducing production costs and labor content through effective automation solutions, • Improving uptime, reliability, and efficiency of new and existing automated systems, • Successfully launching automation projects on time, within budget, and meeting defined performance targets, • Expanding automation capability by identifying and qualifying new vendors and technologies, • Minimizing downtime through effective troubleshooting, system support, and error recovery improvements ESSENTIAL DUTIES AND RESPONSIBILITIES Automation and Controls — 50% • Designs and implements automated manufacturing systems that increase capacity, improve uptime, and ensure repeatable performance, • Develops and integrates control systems (PLC, HMI, robotics, vision) to ensure safe, error-proof, and efficient operation, • Programs, debugs, and optimizes robotic and automated systems on the shop floor, • Interfaces automation with manufacturing equipment including welding, cutting, stamping, forming, inspection, and assembly systems, • Identifies, evaluates, and collaborates with automation vendors to deliver high-quality system builds, • Reviews and approves system designs, assembly drawings, and tooling components to ensure functionality and manufacturability, • Supports development and execution of IQ/OQ/PQ validation activities to ensure systems meet regulatory and performance requirements Project Management — 30% • Leads automation projects from concept through full production implementation, ensuring alignment with technical, cost, and timeline objectives, • Develops and evaluates cost estimates, production rates, and design feasibility to support decision-making, • Drives cross-functional collaboration to ensure successful system integration and project execution, • Identifies and executes continuous improvement initiatives that enhance manufacturing performance, • Develops robust, repeatable manufacturing processes that meet defined run rates, scrap targets, and process capability requirements Systems Support — 20% • Provides technical support and troubleshooting for automated and robotic systems to minimize downtime and sustain performance, • Develops preventative maintenance strategies and standard work instructions to ensure long-term system reliability, • Creates and maintains bills of material to support system builds, maintenance, and spare parts management Continuously improves system performance through monitoring, root cause analysis, and corrective actions QUALIFICATIONS • Bachelor’s degree in Engineering or related field required, • 3–7 years of experience in automation, process improvement, or manufacturing engineering, • Experience with IQ, OQ, PQ validation processes and protocols required, • Demonstrated ability to synthesize complex information and develop effective solutions, • Experience in high-volume manufacturing environments (injection molding, metal stamping, etc.) strongly preferred, • Proven ability to independently design cost-effective, functional automation systems meeting complex requirements LICENSE AND CERTIFICATION · None TECHNICAL SKILLS • Programming and debugging PLCs, HMIs, robotics, and vision systems, • Allen Bradley (RSLogix 5000), FactoryTalk, RSLinx, • MS Office Suite; Minitab or similar statistical tools, • Blueprint reading and Geometric Dimensioning & Tolerancing (GD&T), • Statistical Process Control (SPC), Measurement Systems Analysis (MSA / GR&R), • Design of Experiments (DOE)

Job Description Traffic Systems Sales Estimator Company: Intelligent Traffic Supply Products, LLC (ITS) Location: South Plainfield, NJ Industry: Intelligent Transportation Systems (ITS) & Infrastructure We are currently seeking a Traffic Systems Sales Estimator to join our team. In this role, you will analyze intersection construction plans and respond to RFQs to secure the sale of products. Utilize your skills in plan/schematics interpretation, mathematical calculations and data management to define job scopes, detail job requirements, and delivery results to customers. Our team will provide comprehensive training on transportation systems and signal equipment. If you thrive in a collaborative environment, have a keen eye for detail, and are excited to learn and grow within a new industry, this is the role for you! Apply today to be part of a company where your estimating expertise makes a real impact! Key Responsibilities: • Research and respond to public bid opportunities for upcoming government jobs, • Receive and respond to requests for quotes from contractors and municipalities, • Research contracts, job specifications and schematic drawings; prepare quantity and pricing take-offs of material and labor needed for job/order delivery, • Document all calculations and analysis used in estimates, • Work with Purchasing to secure material pricing and ensure material compliance, • Revise/requote documentation to reflect changes in plans and scope of work, • Obtain material approvals from municipal project owners, • Monitor overall sales results to evaluate ROI for orders delivered, • Understand customers’ business and technical requirements; establish relationships with direct decision-makers and their staff, • Work with internal Project Coordinator, Production, Purchasing and Technical staff to support pre- and post-production activities Qualifications • Bachelor’s Degree in Manufacturing, Construction Management, Accounting, Engineering or a related field, • 3+ years estimating or engineering experience in construction or manufacturing, • 2+ years successful experience in a business-to-business or business-to-government sales model, • Proficient knowledge of sales estimation and pricing strategies, • Ability to read and interpret specifications and trade drawings, • Expert knowledge Microsoft Excel and electronic file management, • Superb math skills, • Strong customer relationship management, • Ability to organize and utilize large amounts of data, • Ethical judgement and decision-making Company DescriptionIntelligent Traffic Supply Products, LLC Intelligent Traffic Supply Products, LLC (ITSP) is the leading specialized provider for modernizing New Jersey's roadways. We don't just supply traffic equipment—we engineer and deliver the precision components that form the backbone of Intelligent Transportation Systems (ITS) across the state. We specialize in the expert assembly and distribution of custom-built, high-specification traffic control solutions for a rapidly expanding base of municipal clients. Our comprehensive suite of products is crucial for building safer, smarter, and more efficient urban environments. It includes: Advanced Control Systems: Cubic ITS signal controllers and sophisticated system communications equipment. Infrastructure Components: Traffic signal assemblies, durable traffic poles, and assorted hardware and software. Detection & Safety: Cutting-edge pedestrian and vehicle detection technology, and complete pedestrian crosswalk systems. At ITSP, we are dedicated to building the future of New Jersey's traffic flow, one smart solution at a time.Intelligent Traffic Supply Products, LLC\r\n\r\nIntelligent Traffic Supply Products, LLC (ITSP) is the leading specialized provider for modernizing New Jersey's roadways.\r\n\r\nWe don't just supply traffic equipment—we engineer and deliver the precision components that form the backbone of Intelligent Transportation Systems (ITS) across the state. We specialize in the expert assembly and distribution of custom-built, high-specification traffic control solutions for a rapidly expanding base of municipal clients.\r\n\r\nOur comprehensive suite of products is crucial for building safer, smarter, and more efficient urban environments. It includes:\r\n\r\nAdvanced Control Systems: Cubic ITS signal controllers and sophisticated system communications equipment.\r\nInfrastructure Components: Traffic signal assemblies, durable traffic poles, and assorted hardware and software.\r\nDetection & Safety: Cutting-edge pedestrian and vehicle detection technology, and complete pedestrian crosswalk systems.\r\n\r\nAt ITSP, we are dedicated to building the future of New Jersey's traffic flow, one smart solution at a time.

Job DescriptionJob Title: AI/ML Engineer Generative AI & LLM Job Summary We are seeking a skilled AI/ML Engineer with expertise in Generative AI, Large Language Models (LLMs), and agent-based systems. The ideal candidate will design, develop, and deploy scalable AI solutions, leveraging modern frameworks and cloud-based MLOps practices to deliver production-grade systems. This role involves close collaboration with cross-functional teams to translate business requirements into intelligent, reliable AI applications. Key Responsibilities Generative AI & LLM Development • Design, fine-tune, and deploy LLM-based solutions for enterprise use cases such as document intelligence, summarization, and conversational AI., • Build Retrieval-Augmented Generation (RAG) pipelines using vector databases to enhance response accuracy and contextual grounding., • Develop prompt engineering strategies and evaluation frameworks to ensure output quality, consistency, and safety., • Integrate LLMs with enterprise systems using frameworks like LangChain, LlamaIndex, or similar tools., • Evaluate and benchmark different foundation models to select optimal solutions for business needs.AI Agents & Intelligent Automation, • Architect and implement AI agents capable of multi-step reasoning and task execution., • Develop agentic workflows using modern design patterns for complex, multi-turn interactions., • Implement human-in-the-loop mechanisms to ensure compliance, reliability, and risk control., • Integrate AI agents with APIs, enterprise platforms, and orchestration tools., • Establish guardrails, monitoring, and audit logging for responsible AI usage.MLOps & Deployment, • Build and maintain end-to-end MLOps pipelines including training, validation, deployment, and monitoring., • Implement CI/CD pipelines for machine learning models to enable continuous delivery., • Deploy models as scalable APIs or batch services using cloud-native platforms., • Monitor model performance for drift, degradation, and anomalies in production., • Maintain model governance, versioning, and lineage tracking for auditability.Collaboration & Delivery, • Work with business stakeholders to translate requirements into AI-driven solutions., • Participate in Agile/Scrum development processes and contribute to sprint deliverables., • Create technical documentation including solution designs, APIs, and operational guides., • Mentor junior team members and contribute to best practices in AI engineering. Flexible work from home options available.

Job Description Attalon / Location Overview Attalon is a leading technology partner to the global aerospace and defense industry, specializing in lasers and precision optics. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Details This Principal Mechanical Engineer must be a highly experienced technical leader responsible for driving innovation and leading the development of advanced mechanical and optical systems, including laser systems, bulk optics, and fiber optic technologies, for aerospace and defense applications. This role oversees all phases of product development—from conceptual design and prototyping through manufacturing and deployment—while ensuring efficient systems integration and high-performance solutions. The position requires deep expertise in opto-mechanical and photonic systems, hands-on experience with fiber-optic technologies and laser systems, and a proven ability to lead cross-functional teams and mentor the next generation of engineers. A key focus is the delivery of cost-effective, cutting-edge solutions designed to operate in demanding environments such as terrestrial and space applications. Responsibilities • Lead the design and development of advanced optical and mechanical systems: Oversee the engineering of large-scale mechanical systems and opto-mechanical subsystems, including bulk optics, laser systems and fiber optic assemblies. Support the design and development of optical support structures, thermal management, and alignment interfaces while packaging delicate optics for demanding military environments for both prototyping and production-level solutions., • Perform and oversee preliminary analysis: Conduct and guide initial structural, thermal, and environmental analyses to validate mechanical and optical system designs. Provide insights to address application challenges, such as heat dissipation in solid-state laser systems, stress management in fiber optic assemblies and secure mounting that can withstand launch into space or operation on ground and airborne platforms. Participate in risk-reduction efforts through breadboards, prototypes, and subscale testing to refine and optimize designs., • Drive innovations in the opto-mechanics of laser systems: Lead the development of innovative opto-mechanics for fiber, diode-pumped solid-state and semiconductor lasers. Deploy the latest thermal management, fiber processing, and optics-mounting techniques and materials to develop innovative solutions., • Manage detailed engineering designs: Support systems engineering in the decomposition of system-level specifications into sub-system and component-level requirements. Develop, review, and release detailed CAD models, part and assembly drawings, and tolerance analyses to support manufacturable and reliable designs. Ensure compliance with GD&T, ASME Y14.5, and other industry design standards for laser systems, bulk optics, and fiber optic assemblies., • Oversee full product lifecycle development: Direct product development activities from concept through production and deployment. Collaborate with optical, mechanical, electrical, and systems engineering teams, ensuring the seamless integration of fiber optics, laser systems, and precision mechanical elements. Lead efforts to meet rigorous environmental and performance requirements in industrial and high-reliability applications., • Collaborate with vendors and manage supply chains: Assist the management of relationships with vendors, including sourcing, qualification, and quality oversight, to ensure the reliable delivery of components for fiber optic and photonic systems. Provide leadership in technology transfer projects, both domestic and international, to establish scalable manufacturing processes and optimize efficiency., • Lead assembly, integration, and testing efforts: Oversee mechanical aspects of product assembly and integration processes, ensuring precise alignment of optical components, fiber handling systems, and laser systems with mechanical designs. Develop tooling, work instructions, and test plans for robust and efficient assembly and system validation. Oversee performance testing on opto-mechanical systems to meet optical, mechanical, and thermal requirements., • Provide technical leadership and mentorship: Serve as a subject-matter expert on the mechanical aspects of laser and fiber optic systems, offering strategic guidance and technical direction to resolve complex engineering challenges. Actively mentor junior engineers and cross-functional team members, fostering technical growth, collaboration, and innovation across the organization. Minimum Qualifications • Education and Work Experience: A Bachelor’s degree in mechanical engineering or a related field, with 10-12 years of relevant experience., • Opto-Mechanical System Design and Integration: Extensive experience in the design, development, and integration of advanced optical, fiber optic, and laser systems, including bulk optics, optical assemblies, and opto-mechanical components for industrial or military applications., • Fiber Optic Product Development: Expertise in fiber optic technologies, including splicing, cleaving, tapering, recoating, and alignment. Proven ability to develop innovative manufacturing processes and systems for fiber handling, in-situ assembly, material curing, and high-precision optics applications., • Mechanical and Thermal Analysis: Proficient in conducting and guiding preliminary structural, thermal, and environmental analyses using FEA and related methods during the design process, with an emphasis on optimizing designs for manufacturability, cost-effectiveness, and system reliability., • CAD Modeling and Design Standards: Extensive experience with CAD tools (SolidWorks is preferred), including high-fidelity part and assembly modeling, detailed drawing creation, tolerance analysis, and adherence to industry standards such as GD&T, ASME Y14.5, MIL specs, and ASTM standards., • Product Lifecycle Management: Strong track record of managing the full product lifecycle—from conceptual design and prototyping to manufacturing, qualification, and deployment—for opto-mechanical and photonic systems in industrial applications., • Systems Engineering and Cross-Functional Collaboration: Demonstrated ability to lead and collaborate with multidisciplinary teams, including optical, electrical, systems, and controls engineers, to deliver integrated solutions for complex engineering challenges., • Innovation in Advanced Photonics & Laser Systems: Experience driving innovation in laser systems, bulk optics, and photonic products while leveraging advanced technologies for applications in industrial R&D and precision manufacturing., • Assembly, Integration, and Validation: Expertise in product assembly, integration, and testing processes, including the development of tooling, manufacturing processes, and detailed test plans. Skilled at conducting performance validation against stringent optical, mechanical, and environmental requirements., • Leadership and Mentorship: Recognized for providing hands-on mentoring and technical leadership to junior engineers and cross-functional teams, fostering a culture of collaboration, innovation, and professional growth. Preferred Qualifications • Education and Work Experience: Master’s degree with 8-10 years experience, or Ph.D. with 7+ years experience)., • [Lean Manufacturing and DFMA: In-depth knowledge of Lean Manufacturing principles, DFMA techniques, and process optimization for high-precision manufacturing, enhancing efficiency and reducing costs., • Vendor Management and Global Technology Transfers: Expertise in sourcing, qualifying, and managing vendors, as well as overseeing cost control, ensuring quality assurance, and leading international technology transfer to enable scalable and cost-efficient manufacturing operations., • Technical Program Management: Proven experience managing technical programs and projects, driving progress on strategic initiatives, aligning cross-functional teams, managing timelines and budgets, and ensuring successful product delivery., • Technical Expertise in Photonics and Optics: Broad understanding and application of photonics, laser systems, fiber optics technologies, and bulk optical systems in high-performance aerospace and defense related R&D environments. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job Description Launch Your Career at the Intersection of Mathematics and Finance We’re looking for Associate Software Engineer - APL with a strong background in mathematics who will work as a self-starter, is motivated and will bring enthusiasm to the team, contributing to its success. This position will focus on APL development. You will be working on functional delivery in the Wealth Platform, and client delivery. What You’ll Do • Follow standard practices and procedures to analyze, design, program, debug, modify and implement software systems. Directed in studies of potential technology applications and preparing design proposals. Competent in working on most phases of software systems., • Build, modify, review and analyze software systems through code development, testing, debugging and documentation., • Provide production support (on-call) for existing software within the areas covered by the role., • Prepare technical documentation., • Conducts unit & integration testing., • Research problems discovered by QA or product support and develop solutions to the problems., • Work with peers to conduct code reviews across the team and help foster a productive work environment., • Perform straightforward product design, systems analysis and programming activities., • All other duties as assigned. What You Bring • Bachelor’s or Master’s degree in Mathematics, Information Technology, or Computer Science. Nice to Have • Experience in software systems development., • A background in the financial industry (specifically within the managed accounts business)., • Experience with source code version control and software configuration management., • Demonstrated proficiency in working with extract file formats such as XML, flat files, CSV., • Experience with relational databases such as SQL and/or Oracle., • Working knowledge of MATLAB, APL., • Exposure to Dyalog About InvestCloud InvestCloud, a global leader in wealth technology, aspires to enable a smarter financial future. Driving the digital transformation of the wealth management industry, the company serves a broad array of clients globally, including Wealth and Asset Managers, Wirehouses, Banks, RIAs, and Insurers. In terms of scale, the company’s clients represent more than 40 percent of the $132 trillion of total assets globally. As a leader in delivering personalization and scale across advisory programs, including unified managed accounts (UMA) and separately managed accounts (SMA), the company is committed to the success of its clients. By equipping and enabling advisors and their clients with connected technology, enhanced intelligence, and inspired experiences, InvestCloud delivers leading digital wealth management and financial planning solutions, complemented by a dynamic data warehouse, which scale across the complete wealth continuum. In 2024, InvestCloud was named CNBC World’s Top Fintech Company, a proof point of the company’s commitment to innovation and client success. Headquartered in the United States, InvestCloud serves clients around the world. For more information, visit InvestCloud.com. Our Values • Client Connected, • Human Centered, • Technology Forward, • Respect + Integrity, • Excellence The actual salary will vary based on applicant’s education, experience, skills, and abilities, as well as internal equity and alignment with market data. The salary may also be adjusted based on the applicant’s geographic location. Salary range: $65,000 - $80,000. Benefits include medical/Rx, dental, vision, disability, and life/AD&D insurance plans, Flexible Savings Account (FSA), Health Savings Account (HSA), Employee Assistance Plan (EAP), health advocacy, voluntary ancillary plans (accident, critical illness, hospital indemnity, legal, identity theft, auto/home, and pet insurance), 401(k) retirement savings plan with company match, and paid time off. #LI-HJ1

Job Description Tri-State Energy (TSE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. TSE is a Minority Based Enterprise (MBE) for multiple states and has a major focus on providing support for DEI and Diversity initiatives. Regionally, TSE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. TSE is consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. Position Summary The Sales Engineer role involves actively working on identifying and developing energy efficiency and engineering projects while promoting energy efficiency programs through various channels. This position requires strong communication and relationship-building skills to engage with in-house sales team, customers, contractors, and industry stakeholders. The ideal candidate will have a proficient understanding of energy efficiency within HVAC systems and ability to be a bridge between the sales and engineering team. Essential Job Functions Business Development & Sales • Identify and pursue new HVAC project opportunities through direct outreach, networking, and referrals., • Meet with prospective and existing clients to understand facility needs, operational challenges, and budget constraints., • Prepare and present proposals, bids, and technical solutions to customers., • Develop and maintain strong customer relationships to drive repeat business and referrals., • Partner with outreach teams to technically qualify and develop new project opportunities., • Match facility requirements to the most effective energy efficiency measures and program pathways. Project Development & Engineering • Conduct site surveys to assess existing HVAC systems, loads, and conditions., • Perform engineering calculations including heating/cooling loads, airflow, and equipment sizing., • Develop conceptual and detailed designs, schematics, and system layouts., • Select equipment (chillers, boilers, VRF, AHUs, RTUs, controls, etc.) and ensure proper integration with building systems., • Coordinate with manufacturers, suppliers, and contractors for pricing, availability, and technical support. Technical & Financial Analysis • Prepare energy efficiency and lifecycle cost analyses for proposed systems., • Support utility incentive applications by providing technical documentation and savings calculations., • Estimate material, labor, and subcontractor costs for proposals., • Interface directly with Utility Program Managers to pre-verify project eligibility and maximize custom incentive values. Project Coordination • Collaborate with project managers to ensure smooth handoff from sales to execution., • Support permitting, code compliance, and submittal preparation., • Provide technical guidance during installation and commissioning. Qualifications • Bachelor’s degree in mechanical engineering, HVAC Engineering Technology, or related field (preferred)., • A demonstrated interest in energy conservation is essential., • EIT or PE license (preferred but not required)., • HVAC industry certifications (e.g., LEED AP, CEM, ASHRAE member) are a plus., • Must reside in New Jersey., • Possession of a valid US driver’s license., • Willingness and ability to travel within the Tri-State area, with some overnight travel required. Knowledge, Skills and Abilities Technical Knowledge: • Familiarity with lighting components, HVAC equipment, HVAC systems, lighting control systems, and building envelope components., • Understanding of LEED, Energy Star, and/or GRESB standards., • Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint, Outlook) and basic knowledge of CRM database software. Communication & Interpersonal Skills: • Excellent public speaking and written communication skills., • Strong customer service skills, with a focus on proactively identifying customer needs and managing expectations., • Capable of engaging customers, industry stakeholders, and local government officials through various communication channels. Strategic & Professional Abilities: • Experience in evaluating the effectiveness of outreach strategies and proposing alternatives., • Experience developing professional reports, working with professional organizations, and engaging with market sector decision-makers., • Understanding of how to effectively engage multiple decision-making levels within a company., • Contacts in the construction market (builders, developers, architects, engineers, etc.). Personal & Organizational Attributes: • Exceptional organizational, time-management, and planning abilities., • Ability to track deadlines and forecast assignments., • Self-motivated, team-oriented, hands-on, adaptable, and client-focused. Physical Abilities The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Work Environment While performing the duties of this job, the employee is subject to the following work environment: • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, and electrical current. Equal Employment Opportunity (EEO) TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. TSE makes hiring decisions based solely on qualifications, merit, and business needs at the time. Please read through our EEO Policy for more information. TSE is committed to working with and providing reasonable accommodation to applicants with physical and mental disabilities. TSE is a drug-free workplace. Screening TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Why work with us? • Medical, vision, dental insurance and more., • 401(k) and company match., • Company-provided life insurance., • Health Savings Account (HSA)., • Education reimbursement program with management approval., • Annual paid time off., • Observance of 8 Federal Holidays., • Opportunities for advancement and development. If interested in applying for this position, please apply! We would love to make an introduction!

Job Description Attalon / Location Overview Attalon is a leading technology partner to the global aerospace and defense industry, specializing in lasers and precision optics. With over 500 employees in the U.S., Attalon engineers critical optical, laser, and coating technologies that enable systems to see farther, target faster, and survive the harshest environments. From high-energy directed laser systems to satellite optics and hypersonic thermal protection, Attalon equips the warfighter with the advantage of precision. Job Details Attalon is seeking an Optical Engineer to be part of a small, multi-discipline team of engineers as they develop high-tech laser systems for aerospace applications. This engineer will play a wide range of support roles, helping assemble and align lasers, splice optic fibers, set up measurement apparatus and character laser performance. A strong acumen and desire to spend time in the lab working with equipment is necessary. On-the-job training will be available to broaden skillsets. Variable entry levels are available based on the applicant’s experience and skillset. Responsibilities • Assembly & Fabrication: Perform assembly, repair, and testing of electrical, fiber optic, bulk optic, and opto-mechanical assemblies for lab experiments, prototypes, and customer deliverables, following detailed work instructions. This includes soldering, cable harness fabrication, and fiber optic splicing., • Build Prototype Systems: Build and modify prototypes based on engineering specifications., • Testing & Troubleshooting: Conduct functional testing of electrical and optical/fiber assemblies using various test equipment, such as multimeters, oscilloscopes, arbitrary waveform generators, spectrum analyzers, power meters, beam profilers, and signal generators. Troubleshoot and diagnose issues with assistance from designers, identifying root causes and implementing corrective actions. Write test procedures and document test results accurately and thoroughly. Assist engineers in performing experiments and collecting measurement data., • Support R&D Labs: Assist engineers with setting up experiments and assembling test fixtures. Coordinate receiving of material and maintain inventory of components and supplies. Perform routine maintenance and calibration of lab equipment. Minimum Qualifications • Education: Associate's degree in Electronics Technology, Fiber Optics, or a related technical field, with 1-2 years of relevant experience; or an equivalent combination of education and experience., • Hands-On Skills: Experience working in a lab with high-tech equipment. Experience using test equipment such as multimeters, oscilloscopes, arbitrary waveform generators, spectrum analyzers, power meters, beam profilers, or signal generators. Experience with hand tools and basic power tools. Strong attention to detail., • Technical Know-How: Proven ability to read and interpret technical drawings, schematics, and work instructions. Strong problem-solving and troubleshooting skills. Proficiency with Microsoft Office Suite (Outlook, Word, PowerPoint, Excel, Teams)., • Attitude: Enthusiastic attitude. Willing to put in effort to meet schedule deadlines. Ability to work independently and as part of a team. Preferred Qualifications • Education: Bachelor’s degree in Electronics Technology, Fiber Optics, or a related technical field, with 2-4 years of relevant experience; or an equivalent combination of education and experience., • Test-set development: Able to program in LabView to build test sets for data collection., • Fiber-optic experience: Experience assembling and splicing optical fiber and fiber-coupled components., • Electronics experience: Ability to interpret electrical schematics. Working knowledge of analog and digital electronics. Strong soldering skills. Equal Opportunity Employer Statement Attalon, Inc. is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Export Control Compliance This role involves access to technology, materials, software, or hardware subject to U.S. export control laws. Therefore, to be considered, candidates must be classified as a “U.S. Person” under applicable regulations or be eligible for authorization under a U.S. government export license.

Job DescriptionEG&R is seeking an Electrical Engineer with experience in the Power Industry (Power Plants / Substations) who is self-motivated and ready to contribute to the future success of EG&R Engineering PC. Responsibilities: Main responsibilities include creating electrical protection & control and/or physical layout design deliverables for Power Plants and Substations. • Prepare electrical schematics, single lines, calculations, and specifications for the design of electrical distribution systems for Power Plants and Substations., • Supervise and Coordinate Electrical Engineers and Designers in day to day tasks to support project needs., • Review and support the preparation of physical substation design, sections and details, grounding, lightning protection, control building arrangements, interior and exterior raceways, auxiliary AC/DC power systems, and associated bills of material is required., • Develop protection and control designs including panel arrangements, one lines/single lines, three lines, AC schematics, DC elementaries, equipment wiring and relay panel wiring as required., • Prepare calculations for studies and reports (grounding, lighting protection, AC/DC load studies, etc.), • Prepare equipment specifications for procurement, • Provide short term field support during constructionQualifications:, • Must be legally authorized to work in United States. We do not provide Visa Sponsorship at this time., • 2 to 5 years of experience in Engineering and Design for Substations and/or Power Plants, • Bachelor of Science/Masters degree in electrical engineering (Power Distribution/Power Systems) from an accredited institution., • Desire to obtain Engineer-in-Training (EIT) certification and ultimately Professional Engineer (PE) license, • AutoCAD and/or Microstation experience, • Proficiency with National Electrical Safety Code and IEEE / ANSI Standards, • Strong problem solving, organizational, and interpersonal skills., • Aptitude to work in a team environment, • Excellent written & verbal communication skills, • Strong management skills and a desire to grow professionally, • Capability of solving difficult problems that require adaptation and modification of standard approaches, techniques, procedures and criteria Flexible work from home options available.

Job Description The HORIBA Group of worldwide companies provides an extensive array of instruments and systems for applications ranging from automotive R&D, process and environmental monitoring, in-vitro medical diagnostics, semiconductor manufacturing and metrology, to a broad range of scientific R&D and QC measurements. Proven quality and trustworthy performance have established widespread confidence in the HORIBA Brand. Inspired by our unique motto, “JOY and FUN,” we focus on social responsibilities by building state-of-the-art products for scientific advancement; especially for protecting health, safety, and the environment. “HORIBARIANs,” the HORIBA employees all over the world, look forward to working with additional creative and entrepreneurial self-starters. And for years, HORIBA Scientific’s OEM division has been the preferred, reliable and consistent supplier of OEM spectroscopy components throughout the world … offering a complete range of OEM imaging miniature spectrographs and spectrometers along with CCD, Photodiode array (CMOS) and InGaAs detectors that operate from the UV through to the NIR. Our high reliability products and know-how are leveraged in a wide range of high-tech industries such as: Medical, Semiconductor, Pharmaceutical and Biotech to name a few. Presently, our HORIBA Scientific OEM Division is searching for an experienced Electrical Hardware Design Engineer for our North American operation located in Piscataway, New Jersey. The ideal candidate will possess a strong electronics design and development background and will provide technical contributions to an engineering team focusing on the design and development of CCD / CMOS high-speed imaging systems. If you are a self-motivated individual with passion for your work that has garnered success in leading and contributing to team oriented product development efforts, please keep reading and visit our corporate website www.horiba.com to learn more. Qualifications: • Advanced degree preferred in Electrical Engineering or Computer Engineering with 5 yrs of directly related experience., • Minimum of a BSEE degree with 6 to 10 yrs of directly related experience., • Will accept 12+ yrs of equivalent engineering design experience associated with designing instrumentation products, analytical instruments and/or related embedded control systems. Responsibilities: • Project contributor to the development and test of Light Detecting Systems involving CCDs, PDAs, InGaAs and CMOS sensors., • Involvement in all phases of product development: definition, design, qualification and production support., • Design of mixed signal circuits incorporating Op-Amps, Voltage References, DACs, ADCs and discrete semiconductors., • Design of FPGA based high speed digital circuitry incorporating LVDS and MIPI interfaces for sensor command & control., • Participation in the PCB board layout/routing definition stages for new board / product designs., • Contributions to board level test fixture designs Requirements: • Solid understanding of electrical engineering principles in both analog and digital domains., • Design knowledge of low noise / wide bandwidth analog and mixed signal circuits., • Experience with data acquisition systems incorporating the following interfaces: USB 2/3, Gig-E, LVDS, MIPI, SPI and I2C., • Knowledge of system level power distribution design and power management techniques., • Ability to guide multi-layer PCB board designs within stack-up, parts placement and routing requirements., • Familiarity with test equipment: Scopes, DVMs, Power Supplies, Function Generators and Logic / Spectrum Analyzers., • Sound test, troubleshooting and SMT soldering skills., • Production support experience., • Strong problem solving, communication and interpersonal skills. Preferred Attributes (one or more viewed as a plus): • Knowledge of CCD and CMOS imager architectures a plus., • FPGA Design; Verilog and/or VHDL, Altera and/or Xilinx tools., • Experience with Mentor Graphics for schematic capture and PCB layout/routing., • Design experience with Renesas and Cypress processors., • Product design experience in meeting CE & LVD Safety directives., • Project leadership. Compensation Package: HORIBA Instruments offers a competitive compensation package that includes a 401(k) plan with match; employee group dental, vision, life, and disability (short and long-term) paid for by the company; medical insurance, family dental and vision insurance, and supplemental life insurance available with reasonable employee contributions; employee assistance program; paid holidays, vacation, and sick time; flexible spending accounts; and educational reimbursement and commuter benefit programs. If you are an individual with a disability and need an accommodation during the application/hiring process, please call (732)494-8660 for assistance. HORIBA will provide reasonable accommodations, upon request, to support individuals with disabilities to be able to participate in the hiring process. HORIBA is committed to making our workplace accessible for individuals with disabilities. EEO/Veteran Status/Disabilities.

Experts contribute directly to how AI systems learn, reason, and perform across domains like finance, healthcare, engineering, and more. In this role, you'll apply your expertise to help train next-generation AI systems. Generate, review, and refine questions and solutions based on real-world mechan

Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. Recording field measurements and performing civil engineering&nbs

Incoming control of material and sub-contractor goods, as needed. Bachelor's Degree in any Engineering, Science or Mathematics discipline, a plus.

Bachelor's degree in Chemical Engineering, Process Engineering, or a related field. We are seeking an experienced Manufacturing Process Engineer with experience in powder-based manufacturing, with a strong chemistry background to lead and optimize manufacturing operations. Design, develop, test, and

Medical Affairs Project Manager.Raritan, NJ (3 days onsite per week).Contract Medical Project Manager.Cardiovascular product medical launch.The ideal candidate brings strong.Medical Affairs launch readiness.Medical Affairs, Global & regional partners, Alliance partners and cross functional colle

We are seeking a dynamic and highly skilled individual to join our team as a Technical Lead / Project Manager.This role requires a combination of project management expertise, data domain knowledge, technical leadership, and business analysis capabilities to support the successful implementation of

Bachelor's degree in construction management, Engineering, Architecture, or a related field.

Act as the central coordination point between Client Implementations, Product Engineering Sales Client Success and Operations.

Bachelor's degree in construction management, Mechanical Engineering, related field and/or equivalent experience.

Bachelor's degree or equivalent work experience in the electrical contracting/engineering space.