Trabajos embedded engineer en Hauppauge, New YorkCrear alertas

Senior Embedded Software Engineer We are looking for a Senior Embedded Software Engineer to join a collaborative engineering team developing innovative, connected embedded products. This is an opportunity to work across the full embedded software lifecycle—from low-level firmware and microcontroller development through debugging, optimization, hardware integration, and product delivery. You’ll work closely with electrical, hardware, systems, and software engineers to develop reliable firmware for low-power, connected, and battery-operated devices. The role is well suited to an experienced embedded engineer who enjoys solving challenging technical problems and seeing their work become part of real-world products. What You’ll Do • Design, develop, test, debug, and optimize embedded firmware for microcontroller-based systems., • Develop software in embedded C/C++ for low-power and connected devices., • Work with both bare-metal and RTOS-based firmware architectures., • Develop and integrate Bluetooth Low Energy (BLE) and other wireless connectivity solutions., • Work with communication technologies and protocols including Wi-Fi, Zigbee, and cellular connectivity., • Develop firmware for battery-powered and power-constrained products, with a focus on efficiency and reliability., • Work with microcontroller peripherals and interfaces including I²C, SPI, GPIO, ADC, CAN, and UART., • Collaborate closely with hardware and electrical engineers to bring products from concept through development and production., • Read and interpret schematics, datasheets, and hardware specifications., • Perform firmware verification, troubleshooting, analysis, and optimization., • Use tools such as oscilloscopes, logic analyzers, debuggers, and other test equipment to diagnose hardware and software issues., • Contribute to technical requirements, architecture, design decisions, and engineering documentation., • Help identify and resolve complex system-level issues across hardware and software. What You’ll Bring • Bachelor’s or Master’s degree in Electrical Engineering, Computer Engineering, Computer Science, or a related technical discipline., • 7+ years of professional embedded software development experience, or equivalent depth of hands-on experience., • Strong programming experience in embedded C/C++., • Extensive experience developing firmware for microcontrollers, particularly ARM-based platforms such as STM32 or NXP., • Experience with a range of embedded architectures or platforms such as AVR, PIC, or DSPs is valuable., • Experience with BLE/Bluetooth and connected IoT products., • Experience with RTOS and/or bare-metal embedded development., • Strong understanding of microcontroller peripherals, hardware interfaces, and embedded system architecture., • Experience developing software for low-power or battery-operated systems., • Ability to troubleshoot complex embedded systems using hardware and software debugging tools., • Ability to read schematics and work comfortably with hardware engineers., • Strong analytical and problem-solving skills., • Excellent communication skills and the ability to collaborate effectively across engineering disciplines. Nice to Have • Experience with Silicon Labs BG22E and Simplicity Studio., • Experience designing microcontroller or microprocessor subsystems., • Understanding of power, thermal, and timing considerations in embedded systems., • Experience defining or refining technical requirements., • Experience working directly with customers, clients, or cross-functional stakeholders., • U.S. Citizenship. Why Join? • Work on real-world embedded and connected products from concept through development., • Collaborate with experienced engineers across embedded software, hardware, electrical, mechanical, systems, and other disciplines., • Take ownership of technically challenging projects and have a visible impact on the final product., • Work in an environment that encourages innovation, collaboration, and continuous learning., • Access opportunities for professional development, training, and growth., • Competitive compensation and benefits based on experience and expertise., • 9/80 work schedule with an on-site working environment., • Be part of a team that values engineering excellence, creativity, and camaraderie. Position Details Title: Senior Embedded Software Engineer Location: Long Island, NY, Schedule: Full-time, on-site; 9/80 schedule Employment Type: Contract hire or full time FTE

Our client is seeking a motivated and detail-oriented Senior Electrical Engineer to join our engineering team. This senior position is ideal for an engineer who enjoys working across the full product lifecycle—from concept and design through validation and production—while contributing to high-reliability power electronics solutions used in demanding environments such as aerospace, defense, and industrial systems. Job Function: Key Responsibilities • Design, develop, and test analog and power electronic circuits, including AC-DC and DC-DC conversion systems, • Good understanding of DSP based power electronic products, experience in product development / troubleshooting, • Experience in Digital Vector based control of BLDC motors, MATLAB and Simulink would be an asset, • Perform component selection, schematic capture, and PCB layout activities with attention to EMI, thermal performance, and reliability, • Conduct circuit simulation (e.g., SPICE-based tools) and analyze performance under varying electrical and environmental conditions, • Develop and execute validation and qualification test plans, including worst-case analysis and derating, • Troubleshoot hardware issues at the board and system level, including root cause analysis and corrective action implementation, • Collaborate with cross-functional teams including mechanical engineering, manufacturing, and quality assurance, • Support transition from prototype to production, including documentation, test procedures, and manufacturing support, • Participate in design reviews and contribute to continuous improvement of engineering processes, • Heavy interaction with customers to support product development opportunities Job Requirement: Required Qualifications • Bachelor’s degree in electrical engineering or related field, • 7–10 years of relevant industry experience, • Strong foundation in analog circuit design and power electronics, • Experience with schematic capture and PCB layout tools (e.g., Altium or similar), • Experience with lab equipment such as advanced oscilloscopes with optical probes, spectrum analyzers, and power analyzers, • Working knowledge of EMI/EMC principles and mitigation techniques, • Ability to debug circuits and systems methodically and able to work independently, • Strong written and verbal communication skills Preferred Qualifications • Experience designing high-reliability applications (e.g., aerospace, military, or medical), • Familiarity with industry standards such as MIL-STD or IPC guidelines, • Experience with thermal analysis and magnetic component selection, • Exposure to digital control of power converters (e.g., microcontrollers or DSPs), • Understanding of isolation techniques and high-voltage design considerations, • Experience developing embedded firmware and/or PC-based tools (e.g., C/C++, Python, or C#), including simple GUI applications for test, control, or data visualization

Job Title: Software Engineer Location: Hauppauge, NY USA 11788 Duration: Direct Hire Pay Rate: $106,000 -$142,000 plus 12.5% bonus Shift Time: 1st shift Job Details: • Need Embedded SW developer from a Regulated Environment - MUST HAVE, • Must have strong C code -microcontrollers for computation, • Code to black box environment, • Must be familiar software development and design (such as one or some of these DO- 178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) • Not looking for web base development, • Project lead skills are helpful, • No relocation available, • 100% onsite, • Must be a US Citizen, • MUST HAVE project leadership- owning a project start to finish, managing the project and execution. 25% project management 75% development activities. SUMMARY: Seeking an Embedded Senior Software Engineer to join our team. We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle. FUNCTIONS: Our charter is to develop fuel measurement, management and inerting systems for commercial and defense airframers. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial markets. The individual will have the following responsibilities (not an inclusive list): • Develop embedded software using C and/or model-based tools such as SCADE, • Develop high level and low level software requirements, • Create requirements-based test cases and verification procedures, • Perform software integration testing on target hardware using both real and simulated inputs/outputs, • Analyze software requirements, design and code to assure compliance to standards and guidelines, • Perform traceability analysis to customer specification requirements to software code, • Participate in software certification audits, e.g. stages of involvement (SOI) REQUIRED: • BS in Software Engineering, Computer Engineering, Computer Science or related field, • 5+ years of experience performing software development, verification and/or integration, • Strong technical aptitude with analytical and problem-solving capabilities, • Excellent interpersonal and communication skills, both verbal and written, • Ability to work in a team environment, cultivate strong relationships and demonstrate initiative HIGHLY PREFERRED: • Experience with C programming language, • Experience with model-based software development using SCADE, • Experience developing embedded software control systems, • Experience planning and executing projects using Agile software development methodology, • Experience managing requirements using DOORS or DOORS Next Gen (DNG), • Experience with digital signal processing or digital filter design, • Experience with ARM microprocessors, • Experience with serial communication protocols (e.g. CANbus, ARINC, RS-232), • Familiarity with aerospace (e.g., DO-178, DO-330, DO-331) and/or industrial (e.g., IEC 61508) software certification requirements, • Familiarity with functional safety standards such as ISO 13489, IEC 61508, IEC 62061, ISO 26262 or ARP4761Software Engineer to join our team., • We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle.

Principal Embedded Engineer | Long Island, NY (On-site) Permanent X4 Technology is hiring a Principal Embedded Engineer for an on-site role based in Brentwood, NY (Suffolk County / Long Island). Our client is a well-established, growing engineering organization building next-generation hardware products, backed by a stable, well-resourced engineering function and a strong pipeline of ongoing product development. They offer a genuinely flexible working pattern (9/80 schedule - every other Friday off) and a collaborative, hands-on engineering culture where you'll have real technical ownership and influence over architecture decisions. Open to C2C, W2, or permanent applicants - engagement type is flexible depending on what works best for you. This is a Principal-level position - we're looking for a senior technical leader, not just a strong individual contributor. Interviewing now, with the ability to start from September. This is a hands-on principal engineering role spanning embedded software, bare-metal firmware, wireless systems, and hardware-adjacent electrical work. You'll be the technical authority in the room, setting direction on system architecture while still writing code and getting into the detail with the hardware. What you'll be doing: • Owning architecture and technical direction for embedded and bare-metal firmware across current and next-generation product lines, • Writing and reviewing low-level C/C++ firmware directly on microcontrollers, with no OS or RTOS abstraction where required, • Leading development and integration of wireless communication protocols (e.g. BLE, Wi-Fi, cellular, LoRa, or similar) into embedded products, • Working closely with electrical/hardware engineering on schematic review, board bring-up, pin mapping, and system-level debugging, • Mentoring and technically guiding other engineers on the team, and acting as a escalation point for the hardest technical problems, • Driving decisions on processor selection, power budgets, and system architecture trade-offs What we're looking for: • Deep, hands-on embedded and bare-metal firmware experience - genuine low-level development, not just configuration or integration work, • Real experience with wireless technologies (any of BLE, Wi-Fi, cellular, LoRa, GPS, or similar) at the firmware/protocol level, • Strong electrical engineering knowledge - comfortable reading schematics, working through hardware bring-up, and collaborating directly with EE teams, • PCB-level knowledge - able to read and work from PCB layouts, understand board-level design constraints, and troubleshoot issues down to the component/trace level, • Strong C/C++ fundamentals and a track record of taking embedded products from architecture through to production, • Prior experience operating at a Principal / senior technical leadership level, mentoring engineers and owning architecture decisions, • Embedded Linux exposure is a plus but not required - this role is centered on bare-metal and wireless systems work Location: This is an on-site role in Brentwood, NY, with a 9/80 working pattern. Candidates must be local to, or willing to relocate to, the Long Island / Suffolk County area - this is not a remote position. But the client are paying toward $200k per year. Interested? Apply directly or send a message with your resume.

Embedded Linux / Embedded Systems Engineer | Long Island, NY | On-site | 9/80 Schedule X4 Technology is working with a well-established engineering organization in Brentwood, Suffolk County, NY, that is continuing to grow its embedded engineering team. If you're an Embedded Linux engineer working with Yocto, Buildroot, Debian or similar, and you're looking for a role where you can get broader exposure across the stack — rather than being boxed into one part of the software — this could be a really interesting next step. The team works across embedded Linux, low-level firmware, hardware, wireless and system architecture, giving you the opportunity to move both up and down the stack depending on your interests. You'll still be hands-on with Linux and embedded software, but you'll also get exposure to areas such as board bring-up, bootloaders, device drivers, BSPs, hardware integration, communications and lower-level firmware. What makes it interesting? • Broad technical exposure — work from Linux userspace and middleware down through BSPs, drivers, bootloaders and bare-metal firmware., • Yocto / Embedded Linux experience is highly relevant — experience with different Linux flavours such as Debian, Buildroot or similar is also valuable., • Work closely with hardware and EE teams, getting involved in board bring-up, debugging and system-level issues., • Opportunity to develop deeper knowledge of wireless technologies and embedded communications., • Exposure to C/C++ and lower-level embedded development, without being restricted to purely Linux-focused work., • A genuinely hands-on environment where engineers have technical ownership and influence over architecture and design decisions., • Excellent opportunity for someone who wants to grow into a more senior/principal-level technical position over the longer term. The working environment The company has a strong, well-resourced engineering function with a healthy pipeline of new product development, meaning there are good long-term prospects for someone who wants to build a career there rather than simply take the next contract. They also offer a 9/80 schedule, meaning you work nine days over a two-week period and get every other Friday off. It's an on-site role in Brentwood, Long Island, so you'll need to be local or open to relocating. In return, there is a strong overall package, good benefits and the opportunity to work on genuinely interesting embedded products. What they're looking for We're particularly interested in engineers with: • Strong Embedded Linux experience, ideally including Yocto, Buildroot or similar., • Good understanding of the Linux embedded stack and how it interacts with underlying hardware., • Solid C/C++ skills., • Experience with BSPs, device drivers, bootloaders, board bring-up or hardware debugging is highly valuable but not essential., • An interest in getting closer to the hardware and expanding beyond traditional Linux development., • Any experience with BLE, Wi-Fi, cellular, GPS, LoRa or other wireless technologies is a plus., • The ability and desire to take increasing ownership of architecture, technical decisions and system-level problems. You don't need to have done all of this already — the appeal of the role is that it gives a strong Embedded Linux engineer the opportunity to broaden their skill set across the entire embedded stack. Location: Brentwood, NY (on-site) Schedule: 9/80 — every other Friday off Start: Interviewing now (Mid to Senior level applicants recognized) If you're an Embedded Linux engineer who wants to get closer to the hardware, broaden your technical exposure and have a genuine long-term career path, I'd be happy to tell you more. Apply directly or send me your CV/message for a confidential conversation.

Electrical Engineer (PCB Design, Component Engineering) Why Join? This is an opportunity to work on advanced aerospace and high-reliability electronic products from concept through production. The ideal candidate will enjoy solving complex engineering challenges, collaborating with talented multidisciplinary teams, and seeing their designs transition into real-world applications that support mission-critical systems. Location: Long Island, NY Area (Confidential Client) Industry: Aerospace, Defense, Advanced Electronics Manufacturing Experience Level: Mid-Level (3-7 Years) Salary: $95,000 - $130,000 + Bonus + Benefits Work Authorization: U.S. Citizenship or Permanent Residency Required Clearance: Ability to Obtain Security Clearance Preferred Position Overview Our client, a growing aerospace and advanced manufacturing organization, is seeking a Mid-Level Electrical Engineer to support the design, development, testing, and production of complex electronic systems and printed circuit board assemblies (PCBAs). This position offers the opportunity to work on high-reliability products used in demanding aerospace and defense environments while collaborating across engineering, manufacturing, quality, and supply chain teams throughout the entire product lifecycle. Key Responsibilities • Design, develop, and support analog, digital, and mixed-signal electronic circuits and subsystems., • Create electrical schematics, PCB layouts, bills of materials (BOMs), and engineering documentation., • Develop prototypes and perform hardware integration, troubleshooting, debugging, and validation testing., • Support PCB fabrication, assembly, and product transition into manufacturing., • Collaborate with mechanical, manufacturing, quality, and systems engineering teams to ensure successful product development and production., • Conduct Design for Manufacturability (DFM) and Design for Testability (DFT) reviews to improve quality, reliability, and cost efficiency., • Support environmental, functional, qualification, and reliability testing of electronic assemblies., • Analyze test data, investigate failures, perform root cause analysis, and implement corrective actions., • Participate in engineering change management, continuous improvement initiatives, and product lifecycle support activities., • Partner with suppliers and contract manufacturers to support PCB sourcing, fabrication, and assembly requirements. Required Qualifications • Bachelor's Degree in Electrical Engineering or a related technical discipline., • 3-7 years of hands-on electrical design and product development experience., • Strong experience designing and supporting printed circuit board assemblies (PCBAs)., • Proficiency with schematic capture and PCB layout software., • Experience with analog and digital circuit design principles., • Ability to troubleshoot electronic hardware and perform laboratory testing using standard test equipment., • Understanding of engineering drawings, schematics, manufacturing documentation, and configuration control processes., • Excellent communication skills and the ability to work effectively within cross-functional teams. Preferred Qualifications • Experience supporting aerospace, defense, military, space, medical device, or other high-reliability products., • Knowledge of IPC standards, PCB fabrication processes, and electronic assembly techniques., • Familiarity with EMI/EMC design considerations and environmental qualification testing., • Experience working in regulated manufacturing environments., • Exposure to embedded systems, power electronics, motor controls, or control systems., • Experience supporting products from concept through production release., • Familiarity with Design Failure Modes and Effects Analysis (DFMEA), risk management, and quality systems. Security Clearance & Work Authorization Requirements • Must be a U.S. Citizen or Permanent Resident due to customer and regulatory requirements., • Ability to obtain and maintain a U.S. Government security clearance if required., • Active Secret Clearance or higher is a plus., • Experience working within ITAR-regulated environments is highly desirable. Compensation & Benefits Compensation • Base salary ranging from $95,000 - $130,000, depending on experience, qualifications, and industry background., • Performance-based bonus opportunity., • Potential relocation assistance for qualified candidates. Benefits • Medical, Dental, and Vision Insurance, • 401(k) with Company Match, • Life and Disability Insurance, • Paid Vacation, Sick Time, and Holidays, • Tuition Reimbursement and Professional Development Assistance, • Employee Assistance Program (EAP), • Career Advancement Opportunities, • Stable and growing engineering organization with long-term growth potential Key Technical Skills • PCB Design & Layout, • Analog & Digital Circuit Design, • Electronic Hardware Development, • Design Verification & Validation, • Manufacturing Support, • Root Cause Analysis & Troubleshooting, • Design for Manufacturability (DFM), • Design for Testability (DFT), • Aerospace Electronics, • Engineering Documentation & Configuration Control, • Cross-Functional Engineering Collaboration Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to _

Senior Embedded Linux Engineer | Long Island, NY (On-site) | C2C / W2 / Permanent X4 Technology is hiring a Senior Embedded Linux Engineer for an on-site role based in Brentwood, NY (Suffolk County / Long Island). Our client is a well-established, growing engineering organization building next-generation hardware products, backed by a stable, well-resourced engineering function and a strong pipeline of ongoing product development. They offer a genuinely flexible working pattern (9/80 schedule - every other Friday off) and a collaborative, hands-on engineering culture where you'll have real ownership over the systems you build. Open to C2C, W2, or permanent applicants - engagement type is flexible depending on what works best for you. Both mid-level and senior-level candidates will be considered - level is flexible depending on your experience. Interviewing now, with the ability to start from September. This is a hands-on embedded Linux development role - not a Linux administration or network configuration position. You will be writing real code: building and customizing embedded Linux images, developing kernel-level and application-level software, and working close to the hardware. What you'll be doing: • Building and maintaining custom Linux images using Yocto / OpenEmbedded, • Writing and debugging Linux device drivers, kernel modules, and board support packages (BSPs), • Developing application-layer software in C/C++ on embedded Linux targets, • Bringing up new hardware platforms and supporting system integration, • Working across the full stack from bootloader to user-space application What we're looking for: • Solid hands-on experience developing on embedded Linux (Yocto-based systems ideal, but strong Debian-family experience - Ubuntu, Raspberry Pi OS, Knoppix - is also highly valued and transferable), • Real coding experience, not just configuration or system administration - you should be comfortable writing and debugging kernel drivers, BSPs, and application code, not just deploying or configuring existing images, • Strong C/C++ fundamentals, • Familiarity with build systems, version control, and cross-compilation toolchains, • Bonus: RTOS background is a plus, but this role is squarely focused on embedded Linux application development rather than RTOS-only work Location: This is an on-site role in Brentwood, NY, with a 9/80 working pattern. Candidates must be local to, or willing to relocate to, the Long Island / Suffolk County area - this is not a remote position. Interested? Apply directly or send a message with your resume.

Embedded Senior Software Engineer Location: Hauppauge, NY | Work: 100% Onsite | Salary: $106K–$142K + 12.5% Bonus Type: Direct Hire/ Full time Job Summary: Seeking a senior embedded software engineer with 5+ years of experience developing embedded software in regulated environments, preferably aerospace or industrial. Key Responsibilities: • Develop and verify embedded software using C and/or SCADE., • Develop requirements, design, coding, integration, and testing., • Perform software verification, traceability, and certification activities., • Work with hardware and systems teams on embedded control systems., • Lead projects from start to finish, managing execution and development (25% project management / 75% development). Requirements: • Strong C programming and microcontroller experience., • Experience with regulated software standards such as DO-178, ISO 26262, IEC 61508, EN 50128, or IEC 62304., • Project leadership experience., • BS in Software Engineering, Computer Engineering, Computer Science, or related field., • Aerospace/industrial embedded experience preferred., • Experience with SCADE, DOORS/DNG, ARM, CANbus/ARINC/RS-232 is a plus.

Job Title: Senior Embedded Software Engineer Location: Hauppauge, NY Job Type:Contract Work Arrangement: On-Site Experience Required: 7+ Years Job Description We are looking for a mid to senior level Embedded Software Engineer to develop and support firmware for low power and connected embedded systems. This role requires experience with microcontrollers, embedded C/C++, and Bluetooth based IoT solutions, as well as the ability to work with hardware and software engineers. This is a full-time contract-to-hire position based on site at our Hauppauge, NY office. Required Qualifications • Requires a Bachelor or Master of Science in Computer Engineering or Electrical Engineering., • 7+ years of experience., • Extensive experience with microcontrollers, including ARM-based platforms like STM32 and NXP, and AVR, DSP, and PIC devices., • Proficiency in embedded C programming for microcontroller-based systems., • Experience developing bare-metal or RTOS-based firmware., • Experience with BLE and Bluetooth based IoT communication protocols., • Knowledge of IoT communication protocols such as Wi-Fi, Zigbee, and 4G/5G cellular., • Experience developing firmware for low power, battery operated systems., • Ability to design low level software and perform firmware verification, analysis, and optimization., • Experience with microcontroller interfaces: I2C, SPI, GPIO, ADC, CAN, and UART., • Ability to read schematics and understand component data sheets., • Experience troubleshooting and debugging using oscilloscopes, logic analyzers, and related tools.

Sr or Principal Electrical Engineer Location: Brentwood, NY Position Overview We are seeking an experienced Sr or Principal Electrical Engineer to support the design, development, integration, and troubleshooting of complex electronic systems. This role is ideal for a technically strong engineer with expertise in at least one of the following areas: embedded controls and electronics, power conversion, or motor control systems. Technical Competencies • Electrical Design: Complex circuit design, PCB layout, schematics, analog and mixed-signal electronics., • Power Electronics: DC-DC converters, inverters, switching power supplies, and low-power designs., • Embedded Systems: FPGA, microprocessors, microcontrollers, and embedded control electronics., • Testing & Troubleshooting: Board-level debugging, system integration, electronic test equipment, and root-cause analysis., • Engineering Tools: Altium Designer or Siemens Xpedition, LTspice, and analysis tools., • Communication: Customer interaction, technical reviews, design documentation, and cross-functional collaboration. Required Qualifications • Bachelor's degree in Electrical Engineering or a related technical discipline, or equivalent relevant experience., • Demonstrated experience in electrical engineering design, development, analysis, and troubleshooting of complex electronic systems., • Strong technical expertise in at least one of the following:, • Embedded Electronics/Controls: FPGA, microprocessor, microcontroller-based systems, embedded hardware, and control electronics., • Power Conversion: DC-DC converters, inverters, switching power supplies, analog circuitry, and low-power electronics., • Motor Controls: Motor drive electronics, control circuitry, and related electromechanical systems., • Experience troubleshooting complex electronic boards, assemblies, and integrated systems., • Ability to independently diagnose technical issues and develop structured test and debugging approaches., • Experience with electronic test equipment and validation of circuit boards and electronic devices., • Proficiency with electrical CAD tools and schematic/PCB design software., • Experience with circuit analysis, simulation, and hardware/software debugging tools., • Strong analytical, problem-solving, documentation, and communication skills., • Ability to communicate effectively with customers and cross-functional engineering teams., • Ability to obtain and/or maintain a security clearance.

Our client has an exciting opportunity for a Junior Test Engineer to work in product testing and product development testing. The candidate will work with and report to production and engineering managers. He/she will be responsible for building part test setups, qualification testing, making production test jigs, and developing test routines, test software, and test automation. Job Function: • Work with Design Engineers on issues with test equipment hardware, software, reliability, and qualification across multiple shifts and facilities., • Support maintenance and repair of test station hardware, software and interface test adaptors - both custom designed systems and COTS., • Work with factory production personnel to resolve test related issues., • Test PCB layouts., • PCB assembly & test traveler document preparation., • Test box development and initial production run support., • C# code experience for test development., • ATE test integration and development., • When required, support the Design Engineers in troubleshooting and repairing returned products from the customers. Job Requirement: Requirements: • Must have BSEE, electrical engineering degree or relevant military training and experience., • Candidates should have power electronics background., • Basic understanding of analog circuit design, circuit analysis, digital circuit design and analog signal conditioning., • Some exposure to software such as C#, embedded code development, use of de-bugger etc., is desirable.

Sustainability LabVIEW Test Engineer – Special Test Equipment 📍 Brentwood, Long Island | Contract Opportunity Build, sustain, and improve the technology behind critical test systems. We’re looking for an experienced LabVIEW/TestStand Engineer to join a high-performing engineering team supporting the development, maintenance, and continuous improvement of Special Test Equipment (STE) across engineering and manufacturing environments. This is a hands-on opportunity for a contractor who enjoys working at the intersection of test engineering, software, hardware, automation, and production. You’ll have the opportunity to work on sophisticated PXI- and PC-based test platforms, develop test software, troubleshoot equipment, and create solutions that directly support production and engineering programs. What You’ll Be Doing • Develop and maintain manual, semi-automated, and automated Special Test Equipment, • Develop Acceptance Test Procedures (ATP) and Manufacturing Test Procedures (MTP), • Translate customer requirements into detailed product test specifications, • Perform engineering testing in support of multiple programs, • Develop, troubleshoot, and maintain test software using:, • NI LabVIEW, • NI CVI / LabWindows, • NI TestStand, • Python, • Microsoft Visual Basic 6.0, • Work with PXI embedded controllers and associated PXI hardware, • Design and modify engineering and production test fixtures, • Sustain and troubleshoot production Special Test Equipment, • Perform PC repair, maintenance, and legacy operating system support, • Work with SQL databases and Microsoft Access, • Execute testing using laboratory equipment such as digital multimeters, oscilloscopes, and data loggers, • Partner with engineering, manufacturing, and other cross-functional teams to resolve technical challenges What We’re Looking For We’re seeking a technically versatile engineer who can move comfortably between hardware, software, test systems, and production support. Required/Preferred Background: • Bachelor’s degree in Electrical Engineering, Computer Science, or equivalent experience, • 4–5+ years of experience developing and sustaining Special Test Equipment, • Strong experience with test hardware and software development, • Hands-on experience with LabVIEW, TestStand, and/or LabWindows/CVI, • Programming experience with Python and Visual Basic 6.0, • Familiarity with PXI-based test platforms, • Understanding of manufacturing and production environments, • Experience with technical documentation and writing, • Knowledge of legacy operating systems and PC troubleshooting, • Familiarity with SQL and MS Access, • Ability to read requirements, develop test specifications, and execute test procedures, • Strong communication and collaboration skills, • Ability to manage multiple priorities and work effectively across functional teams, • Proficiency with Microsoft Word, Excel, and Visio Why This Contract Opportunity? If you’re a hands-on test engineer who enjoys solving complex technical problems and keeping critical test systems running, this role offers the chance to make a direct impact. You’ll work with a broad range of technologies while supporting real-world engineering and manufacturing programs — making this an excellent opportunity for someone who thrives in a fast-paced, technically challenging environment. Location: Near Brentwood Position: Sustainability Engineer II Type: Contract or Full time Focus: Special Test Equipment | Test Engineering | Automation | Hardware & Software

Our client seeks a motivated, detail-oriented Electrical Engineer (Mid-Level) to join our engineering team. This mid-level position is ideal for an engineer who enjoys working across the full product lifecycle—from concept and design through validation and production—while contributing to high-reliability power electronics solutions used in demanding environments such as aerospace, defense, and industrial systems. Job Function: Key Responsibilities • Design, develop, and test analog and power electronic circuits, including AC-DC and DC-DC conversion systems, • Perform component selection, schematic capture, and support PCB layout activities with attention to EMI, thermal performance, and reliability, • Conduct circuit simulation (e.g., SPICE-based tools) and analyze performance under varying electrical and environmental conditions, • Develop and execute validation and qualification test plans, including worst-case analysis and derating, • Troubleshoot hardware issues at the board and system level, including root cause analysis and corrective action implementation, • Collaborate with cross-functional teams including mechanical engineering, manufacturing, and quality assurance, • Support transition from prototype to production, including documentation, test procedures, and manufacturing support, • Participate in design reviews and contribute to continuous improvement of engineering processes, • Interface with customers for product deployment Job Requirement: Required Qualifications • Bachelor’s degree in Electrical Engineering or related field, • 3–7 years of relevant industry experience, • Strong foundation in analog circuit design and power electronics, • Experience with schematic capture and PCB layout tools (e.g., Altium or similar), • Familiarity with lab equipment such as oscilloscopes, spectrum analyzers, and power analyzers, • Working knowledge of EMI/EMC principles and mitigation techniques, • Ability to debug circuits and systems methodically, • Strong written and verbal communication skills Preferred Qualifications • Experience designing for high-reliability applications (e.g., aerospace, military, or medical), • Familiarity with industry standards such as MIL-STD or IPC guidelines, • Experience with thermal analysis and magnetic component selection, • Exposure to digital control of power converters (e.g., microcontrollers or DSPs), • Understanding of isolation techniques and high-voltage design considerations, • Experience developing embedded firmware and/or PC-based tools (e.g., C/C++, Python, or C#), including simple GUI applications for test, control, or data visualization

We are looking for a mid to senior level Embedded Software Engineer to develop and support firmware for low power and connected embedded systems. This role requires experience with microcontrollers, embedded C/C++, and Bluetooth based IoT solutions, as well as the ability to work with hardware and software engineers. Required Qualifications • Requires a Bachelor or Master of Science in Computer Engineering or Electrical Engineering, • Extensive experience with microcontrollers, including ARM-based platforms like STM32 and NXP, and AVR, DSP, and PIC devices., • Proficiency in embedded C programming for microcontroller-based systems, • Experience developing bare-metal or RTOS-based firmware, • Experience with BLE and Bluetooth based IoT communication protocols, • Knowledge of IoT communication protocols such as Wi-Fi, Zigbee, and 4G/5G cellular, • Experience developing firmware for low power, battery operated systems, • Ability to design low level software and perform firmware verification, analysis, and optimization, • Experience with microcontroller interfaces: I²C, SPI, GPIO, ADC, CAN, and UART., • Ability to read schematics and understand component data sheets, • Experience troubleshooting and debugging using oscilloscopes, logic analyzers, and related tools Preferred Qualifications • Experience with Silicon Labs BG22E and Simplicity Studio, • Ability to design microprocessor or microcontroller subsystems and analyze power, thermal, and timing considerations, • Experience developing and refining technical requirements in a client facing environment

Job Title: Embedded Senior Software Engineer Work Location: Hauppauge, NY Salary: $106,000 -$142,000 plus 12.5% bonus RPO Direct Hire • Need Embedded SW developer from a Regulated Environment - MUST HAVE, • Must have strong C code -microcontrollers for computation, • Code to black box environment, • Must be familiar software development and design (such as one or some of these DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304), • Not looking for web base development, • Project lead skills are helpful, • No relocation available, • 100% onsite, • MUST HAVE project leadership- owning a project start to finish, managing the project and execution. 25% project management 75% development activities. SUMMARY: We are seeking an Embedded Senior Software Engineer to join our team. We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle. FUNCTIONS: Our charter is to develop fuel measurement, management and inerting systems for commercial and defense airframers. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial markets. The individual will have the following responsibilities (not an inclusive list): Develop embedded software using C and/or model-based tools such as SCADE Develop high level and low level software requirements Create requirements-based test cases and verification procedures Perform software integration testing on target hardware using both real and simulated inputs/outputs Analyze software requirements, design and code to assure compliance to standards and guidelines Perform traceability analysis to customer specification requirements to software code Participate in software certification audits, e.g. stages of involvement (SOI) REQUIRED: BS in Software Engineering, Computer Engineering, Computer Science or related field 5+ years of experience performing software development, verification and/or integration Strong technical aptitude with analytical and problem-solving capabilities Excellent interpersonal and communication skills, both verbal and written Ability to work in a team environment, cultivate strong relationships and demonstrate initiative HIGHLY PREFERRED: Experience with C programming language Experience with model-based software development using SCADE Experience developing embedded software control systems Experience planning and executing projects using Agile software development methodology Experience managing requirements using DOORS or DOORS Next Gen (DNG) Experience with digital signal processing or digital filter design Experience with ARM microprocessors Experience with serial communication protocols (e.g. CANbus, ARINC, RS-232) Familiarity with aerospace (e.g., DO-178, DO-330, DO-331) and/or industrial (e.g., IEC 61508) software certification requirements Familiarity with functional safety standards such as ISO 13489, IEC 61508, IEC 62061, ISO 26262 or ARP4761Software Engineer to join our team. We are looking for a candidate who has working experience designing, developing and verifying embedded software in aerospace and/or industrial applications. The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle.

Job Description At Maxxima, we design and develop innovative LED lighting, electrical, and safety solutions for automotive, heavy-duty truck, and consumer applications. We are seeking an Electrical Engineer with a hardware-focused background to support product development, electrical lab testing, circuit troubleshooting, and PCB validation for our growing product lines. This is a hands-on engineering role working onsite at our Hauppauge, NY location, centered on electrical hardware testing, circuit-level debugging, and product validation. You’ll work closely with engineering leadership and cross-functional teams throughout the full product lifecycle, from prototype and testing through manufacturing and production support, while helping us continue building innovative products and a brand we’re proud of. Why Join Maxxima?: • Hands-on electrical engineering role focused on hardware, testing, and product validation, • Exposure to full product development lifecycle in LED lighting and automotive electrical systems, • Collaborative, fast-moving engineering team with direct access to leadership Benefits & Perks: • 401(k) with generous company match, • Paid time off, company-paid holidays, and volunteer day, • Highly subsidized medical coverage, plus dental and vision options, • Company-paid life insurance and disability coverage, • Healthcare concierge services and Employee Assistance Program (EAP), • Employee discounts on Maxxima products, entertainment, travel, and more Key Responsibilities: • Support product development from prototype to production, focusing on hardware validation and circuit performance, • Perform electrical lab testing, troubleshooting, and failure analysis on product designs, • Conduct PCB bring-up, board-level debugging, and verification testing, • Analyze analog and digital circuit behavior to ensure performance, safety, and reliability, • Use lab equipment such as oscilloscopes, multimeters, power supplies, and signal generators, • Review and interpret schematics, PCB layouts, wiring diagrams, and technical specifications, • Develop and improve test procedures and validation methods for electrical products, • Document test results, findings, and corrective actions for engineering and quality teams, • Collaborate with engineering, manufacturing, and quality teams to resolve hardware issues during development Requirements: • Bachelor’s degree in Electrical Engineering or related field, • 2+ years of experience in electrical engineering, product testing, or hardware validation, • Strong understanding of analog and digital circuitry, • Hands-on experience with PCB debugging, schematics, and electrical troubleshooting, • Experience using standard electrical lab equipment, • Strong analytical, troubleshooting, and communication skills, • Ability to manage multiple projects and priorities, • Experience with LED lighting, automotive electronics, or power electronics a plus, • Exposure to embedded systems (hardware interaction only) a plus, • Basic scripting (C, C++, Python, or LabVIEW) for test support a plus Salary Range: $65,000 - $75,000 Maxxima is a division of Panor Corp. We are an equal opportunity employer. Panor Corp. provides equal employment opportunity to all employees and applicants without regard to actual or perceived race, creed, color, citizenship, sex, pregnancy, religion, national origin, military status, marital status, sexual orientation, gender expression or identity, genetic information (including genetic predisposition), age, disability, status as a victim of domestic violence, or any other group protected by applicable federal, state and local laws. This policy applies to all terms and conditions of employment including, but not limited to, recruitment, hiring, assignment of duties, benefits, promotion, discipline, harassment, training, compensation, leave of absence, layoff and termination.

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Training & development, • Vision insurance, • Wellness resources Electrical Engineer VJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This electrical engineering career opportunity is responsible for assisting in the design, wiring, testing and debugging complex, electro-mechanical, industrial x-ray integrated sources. Job Description: • Responsible for creating and maintaining Electrical Engineering Change Notices, • Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies used with x-ray applications, • Test, troubleshoot and debug electrical components and systems, • Analyze equipment to establish operating data and conduct experimental tests, • Works with technical personnel to ensure prototype models are assembled according to design specification, • Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards, • Generate, revise and finalize BOMs, • Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software) to generate and edit system electrical design documents, • Provide support to other departments in the creation of technical documentation, system manuals and customer facing documentation, • Create and maintain engineering reports, • Interact with other engineering disciplines, the sales and production teams on system designs and to help resolve customer problems and provide world class customer service, • Perform other duties as assigned by engineering team, • Follow all VJX and OSHA workplace safety requirements and policies, • Safety Sensitive PositionEssential Skills:, • Bachelor’s degree or higher in Electrical Engineering, • Internship or work experience in a manufacturing or environment, • Understanding of electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams, • Familiarity with soft switching techniques, schematics capture and PCB layout, • Prior soldering experience, • Proficiency in the English language with established written and verbal communication skills, • Excellent Microsoft Office Skills, • Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization, • Legally authorized to work in the US and able to successfully pass a personal background check and drug screening Non-Essential Skills:, • Knowledge of CE, UL, or other applicable regulatory guidelines or standards, • X-ray component knowledge, • Basic understanding of an MRP or ERP systemPhysical & Mental Demands: · Regularly required to sit, walk, bend, stoop and stand within an industrial environment • Will need to repeatedly use hands and fingers to operate basic office equipment and operate hand and power tools standard to a production environment, • Expected to effectively communicate in person, on the phone and via email and other electronic devices on a continual and repetitive basis, • Responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance, • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus, • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner, • May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required On a regular basis, will be required to: • Use written and oral communication skills, • Read and interpret data, information and documents, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated.

Job Description Firmware Engineer Key Responsibilities: • Firmware Development: Design, develop, and maintain embedded firmware for power supply products, including microcontroller programming, device drivers, and communication protocols. Familiarity with Microchip, TI and Freescale uP’s and their coding., • Algorithm Development: Collaborate with hardware engineers to develop and optimize control algorithms for power conversion, voltage regulation, and protection mechanisms., • Integration and Testing: Integrate firmware with hardware platforms and conduct thorough testing to ensure functionality, reliability, and compliance with specifications and standards., • Documentation: Prepare clear and comprehensive documentation including design specifications, test plans, and user manuals to support product development and customer support activities., • Troubleshooting and Debugging: Identify and resolve firmware-related issues through systematic debugging, testing, and analysis of system behavior., • Continuous Improvement: Stay abreast of emerging technologies, industry trends, and best practices in firmware development to propose and implement continuous improvements in our products and processes., • Collaboration: Work collaboratively with cross-functional teams to ensure alignment of firmware development efforts with overall project goals and timelines. Qualifications: • BS in EE or Computer Science or related fields, • Prefer 3-5 years experience but entry level / new graduate will be considered based on experience., • Domestic and international travel may be required., • Bilingual Mandarin a plus., • Assembly language knowledge a plus., • Sponsorship for H1B is available., • Onsite position in NY(Long Island) office, no hybrid or remote option Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Vision insurance, • Life Insurance, • Paid time off Location – New York (Long Island)

Job Description iRocket is scaling its autonomous launcher capabilities, and we’re looking for an Avionics Engineer to design, integrate, and verify guidance, navigation, control, and flight-software systems for our reusable launch vehicles. The Role • Design and integrate avionics architectures: flight computers, sensors, guid-nav-control, actuation subsystems, and vehicle communication systems., • Produce schematics, PCB layouts, thermal/mechanical analysis, and firmware/FPGA integration where applicable., • Perform system-level verification: hardware-in-loop, software-in-loop, vibration/thermal/EMI testing, and flight-qualification., • Work with software, propulsion, structures, and systems teams to close requirements and flight readiness., • Maintain documentation: requirements, verification plans, traceability, and anomaly reports. Requirements • Bachelor’s degree in Electrical, Aerospace, or Computer Engineering., • 3+ years of avionics or embedded systems engineering in aerospace, defense, or complex systems environment., • Experience with PCB design, signal conditioning, sensor integration, flight-software verification, and test systems., • Knowledge of guidance/navigation/control algorithms, FPGA/embedded firmware, and hardware validation., • Strong problem-solving and systems-thinking skills; ability to lead integration and verification in a startup setting. Benefits • Health Care Plan (Medical, Dental & Vision), • Retirement Plan (401k, IRA), • Life Insurance (Basic, Voluntary & AD&D), • Paid Time Off (Vacation, Sick & Public Holidays), • Family Leave (Maternity, Paternity), • Short Term & Long Term Disability, • Wellness Resources

Job DescriptionBenefits: • 401(k) matching, • Bonus based on performance, • Company parties, • Competitive salary, • Dental insurance, • Health insurance, • Paid time off, • Parental leave, • Training & development, • Vision insurance High Voltage Electrical Engineer VJ X-Ray LLC (VJX) is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. A High Voltage Electrical Engineer at VJX is engaged in technical projects that include design, assembling, wiring, testing and troubleshooting complex, electro-mechanical, integrated x-ray sources and high voltage generators. Job Description: · Design, modify and evaluate electronic circuitry, parts and components for high voltage power supplies for x-ray applications · Test, troubleshoot and debug electrical components and systems · Regularly work with power output up to 450 kV and up to 6kW · Work on multiple projects varying in complexity from inception to completion · Analyze equipment to establish operating data and conduct experimental tests · Works with technical personnel to ensure prototype models are assembled according to design specification · Review engineering drawings and designs to ensure adherence to established specifications, internal guidelines, quality standards and national codes/standards · Generate, revise or finalize BOMs · Create and maintain engineering reports · Interact with a cross-disciplinary engineering team (mechanical, electrical, embedded software and special projects) on system designs and to help resolve customer issues and provide world class customer service · Participation in the creation of technical documentation, system manuals and customer facing documentation · Follow all VJX and OSHA workplace safety requirements and policies · Safety Sensitive Position Essential Skills: · Bachelor’s Degree in Electrical Engineering · Minimum of 3 years of experience in a manufacturing environment · Strong working knowledge of power supplies, electrical circuitry with established electrical safety work protocols and practices and ability to read electrical diagrams · Knowledge of analog circuit design · Familiarity with soft switching techniques, schematics capture and PCB layout · Ability to solve complex technical problems with minimal supervision · Experience with a variety of testing equipment including but not limited to Oscilloscopes and Multimeters · Proficient soldering skills · Proficiency in the English language with established written and verbal communication skills · Ability to effectively communicate with all levels of staff and customers to influence, train and negotiate simple to complex topics · Proficiency in Outlook, Microsoft Word, Excel and PowerPoint · Ability to work in a fast-paced dynamic environment, capable of prioritization, multitasking and effective organization · Must be legally authorized to work in the US · Will need to successfully pass a drug screening and background check Non-Essential Skills: · Knowledge of CE, UL, or other applicable regulatory guidelines or standards · Basic understanding of an ERP system · Ability to travel domestically and internationally for customer service purposes Physical Demands and Mental Demands: · Regularly required to sit, walk, bend, stoop and stand in a manufacturing environment · Will be required to lift, move, erect, install and assemble components of varying weight, height, length and width dimensions · Day to day responsibilities will require lifting, moving, staging and placing of materials up to 50 pounds alone and heavier with assistance · Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment · Expected to effectively communicate in person, on phone, and via email or other electronic devices on a continual and repetitive basis · Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus · Must be able to fulfill essential job function in a consistent state of alertness and safe manner · May be required to travel, domestically and internationally, by car and by air. Overnight stays may also be required. On a regular basis, will be required to: • Use written and oral communication skills, • Read and interpret data, information and documents, • Analyze and solve non-routine and complex problems, • Be creative, make judgements, use reasoning and make decisions, • Observe and interpret situations, • Learn and apply new information or skills, • Perform detailed work on multiple, concurrent tasks, • Work under intensive deadlines with frequent interruptions, • Interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels, • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals.This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Discrimination of any type is not tolerated.

Design, develop, test, debug, and optimize embedded firmware for microcontroller-based systems. Contribute to software architecture, technical requirements, design decisions, and engineering documentation.

We are seeking an Embedded Linux Systems Engineer with a strong electrical. Bachelor or Master of Science degree in Computer Engineering, Electrical. Engineering, or a related field.

BS in Software Engineering, Computer Engineering, Computer Science or related field. Seeking an Embedded Senior Software Engineer to join our team. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologie

We are looking for a mid to senior level Embedded Software Engineer to develop and support firmware for low power and connected embedded systems. This role requires experience with microcontrollers, embedded C/C++, and Bluetooth based IoT solutions, as well as the ability to work with hardware and s

Embedded Linux / Embedded Systems Engineer | Long Island, NY | On-site | 9/80 Schedule. You'll still be hands-on with Linux and embedded software, but you'll also get exposure to areas such as. Yocto / Embedded Linux experience is highly relevant.

Job Title: Senior Embedded Software Engineer. We are looking for a mid to senior level Embedded Software Engineer to develop and support firmware for low power and connected embedded systems. This role requires experience with microcontrollers, embedded C/C++, and Bluetooth based IoT solutions, as w

This role requires experience with microcontrollers, embedded C/C++, and Bluetooth based IoT solutions, as well as the ability to work with hardware and software engineers. Ability to design low level software and perform firmware verification, analysis, and optimization. Job Title: Senior Embedded

BS in Software Engineering, Computer Engineering, Computer Science or related field. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial mar

Strong C/C++ fundamentals and a track record of taking embedded products from architecture through to production. Embedded Linux exposure is a plus but not required - this role is centered on bare-metal and wireless systems work. Principal Embedded Engineer | Long Island, NY (On-site) Permanent.

Owning architecture and technical direction for embedded and bare-metal firmware across current and next-generation product lines. BLE, Wi-Fi, cellular, LoRa, or similar) into embedded products. Deep, hands-on embedded and bare-metal firmware experience - genuine low-level development, not just conf

BS in Software Engineering, Computer Engineering, Computer Science, or related field. Embedded Senior Software Engineer. Seeking a senior embedded software engineer with.

We are looking for a mid to senior level Embedded Software Engineer to develop and support firmware for low power and connected embedded systems. This role requires experience with microcontrollers, embedded C/C++, and Bluetooth based IoT solutions, as well as the ability to work with hardware and s

Contribute to software architecture, technical requirements, design decisions, and engineering documentation. This role is well suited to an experienced embedded engineer who enjoys working closely with hardware and electrical engineers, solving challenging technical problems, and seeing their work

Contribute to software architecture, technical requirements, design decisions, and engineering documentation. Electrical Engineering, Computer Engineering, Computer Science. This role is well suited to an experienced embedded engineer who enjoys working closely with hardware and electrical engineers

Linux, low-level firmware, hardware, wireless and system architecture. You'll still be hands-on with Linux and embedded software, but you'll also get exposure to areas such as. Linux userspace and middleware down through BSPs, drivers, bootloaders and bare-metal firmware.

BS in Software Engineering, Computer Engineering, Computer Science or related field. The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial mar

BS in Software Engineering, Computer Engineering, Computer Science, or related field. Embedded Senior Software Engineer. Seeking a senior embedded software engineer with.

The Software Engineering team works closely with the Systems and Electronic Hardware Engineering teams to develop, qualify and certify these technologies as products for our customers in aerospace and industrial markets. BS in Software Engineering, Computer Engineering, Computer Science or related f

Requires a Bachelor or Master of Science in Computer Engineering or Electrical Engineering. Experience with BLE and Bluetooth based IoT communication protocols. Knowledge of IoT communication protocols such as Wi-Fi, Zigbee, and 4G/5G cellular.

Job Title: Senior Embedded Software Engineer. We are looking for a mid to senior level Embedded Software Engineer to develop and support firmware for low power and connected embedded systems. This role requires experience with microcontrollers, embedded C/C++, and Bluetooth based IoT solutions, as w

Contribute to software architecture, technical requirements, design decisions, and engineering documentation. Design, develop, test, debug, and optimize embedded firmware for microcontroller-based systems.

PCB-level knowledge - able to read and work from PCB layouts, understand board-level design constraints, and troubleshoot issues down to the component/trace level. Working closely with electrical/hardware engineering on schematic review, board bring-up, pin mapping, and system-level debugging. Deep,

The candidate should be familiar with industry-standard software development and design assurance practices (such as DO-178, ISO 26262, EN 50128, IEC 61508 or IEC 62304) and their application across the entire software development lifecycle. The candidate should be familiar with industry-standard so

Seeking a senior embedded software engineer with. Develop and verify embedded software using. Perform software verification, traceability, and certification activities.

Summary:A Test Engineer I - Software develops test systems and software to ensure the quality and reliability of our products. Test Engineer I - SoftwareNorth Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and mot

Are you looking for a unique opportunity to be a part of something great? Want to join a 17,000-member team that works on the technology that powers the world around us? Looking for an atmosphere of trust, empowerment, respect, diversity, and communication? How about an opportunity to own a piece of a multi-billion dollar (with a B!) global organization? We offer all that and more at Microchip Technology Inc.People come to work at Microchip because we help design the technology that runs the world. They stay because our culture supports their growth and stability. They are challenged and driven by an incredible array of products and solutions with unlimited career potential. Microchip’s nationally-recognized Leadership Passage Programs support career growth where we proudly enroll over a thousand people annually. We take pride in our commitment to employee development, values-based decision making, and strong sense of community, driven by our Vision, Mission, and 11 Guiding Values; we affectionately refer to it as the Aggregate System and it’s won us countless awards for diversity and workplace excellence.Our company is built by dedicated team players who love to challenge the status quo; we did not achieve record revenue and over 30 years of quarterly profitability without a great team dedicated to empowering innovation. People like you.Visit our careers page to see what exciting opportunities and company perks await!Job Description:Microchip is hiring for an Applications Engineer in the Networking Communication Group. The Applications Engineer will be supporting PCIe and USB products. The Applications Engineer enables the customers to be successful using Microchip products. They do this in the following ways:Reviewing schematic and block diagrams for USB and PCIe communication systems using Microchip products.Providing driver debugging and development guidance for PCIe products.Answering questions from Field Sales engineers and customers during the development process.Creating collateral that improves the user experience for the user. This includes:Application NotesKnowledgebase ArticlesSoftware ExamplesImplementation ManualsIdentifying gaps in the current enablement material, and proactively setting goals to address the gaps observed while supporting customers.Creating high level requirements for the development teams that can improve the customer experience with new product development.Requirements/Qualifications:The Applications Engineer position has the following requirements –Bachelors of Science or equivalent in Electrical Engineering, Computer Science, Computer Engineering or related fields, with at least 7.5 years of relevant experience.Strong knowledge of various programming languages, including C, C++, Python and other embedded languages.Strong knowledge of Linux operating systems and the building process.Strong experience in customer support and customer enablement.Knowledge of embedded processor development flow and ecosystems.Knowledge of PCIe Driver development and debug processes.Knowledge of PCIe and USB signaling and general packet inspection techniques.Travel Time:0% - 25%Physical Attributes:Hearing, Seeing, Talking, Works Alone, Works Around OthersPhysical Requirements:90% Sitting, 10% Walking/StandingPay Range:We offer a total compensation package that ranks among the best in the industry. It consists of competitive base pay, restricted stock units, and quarterly bonus payments. In addition to these components, our package includes health benefits that begin day one, retirement savings plans, and an industry leading ESPP program with a 2 year look back feature. Find more information about all our benefits at the link below:Benefits of working at MicrochipThe annual base salary range for this position, which could be performed in the US, is $70,304 - $205,000.**Range is dependent on numerous factors including job location, skills and experience.Microchip Technology Incis an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.For more information on applicable equal employment regulations, please refer to the Know Your Rights: Workplace Discrimination is Illegal Poster.To all recruitment agencies: Microchip Technology Inc. does not accept unsolicited agency resumes. Please do not forward resumes to our recruiting team or other Microchip employees. Microchip is not responsible for any fees related to unsolicited resumes.SummaryLocation: TX - Austin - Park Centre; NY - Hauppauge; AZ - ChandlerType: Full time

We are seeking a Embedded Systems Test Engineer to lead the design, development, execution of embedded hardware and system test. Strong background with hardware and embedded systems. Degree with 2+ years of experience of hands on embedded systems design, development, and test.