Trabajos green engineering en Massapequa, New YorkCrear alertas

Job DescriptionDescription: Temperature Control Assembler Cox & Company, a leader in solving the aerospace industry's most challenging ice protection and temperature control problems, is seeking a dedicated and outgoing Electronics Assembler to join our Temperature Control Systems Department. With over 80 years of experience working with OEMs, Tier 1 and Tier 2 suppliers, and major modification and finishing centers worldwide, we pride ourselves on delivering high-quality, full-lifecycle support from initial design to aircraft integration and operation. This is an exciting opportunity to contribute to innovative aerospace solutions in a dynamic and collaborative environment. Key Responsibilities: • Assemble electronic subassemblies according to engineering specifications and work instructions, • Perform detailed inspections and testing of assembled components to ensure quality standards, • Collaborate with engineering and production teams to troubleshoot and resolve assembly issues, • Maintain a clean and organized work area, adhering to safety and quality protocols, • Document assembly processes and test results accurately in company systems, • Assist in the continuous improvement of assembly procedures and workflows Skills and Qualifications: • Proven experience in electronic assembly, preferably within aerospace or related industries, • Strong understanding of electronic components, wiring, and soldering techniques, • Excellent attention to detail and manual dexterity, • Ability to read and interpret technical drawings, schematics, and work instructions, • Good communication skills and a team-oriented attitude, • Ability to work in a fast-paced environment and meet production deadlines At Cox & Company, we foster a culture of innovation, teamwork, and continuous growth. We offer competitive benefits and opportunities for professional development, making it an ideal place to advance your career in aerospace manufacturing. Join us in delivering cutting-edge solutions that keep aircraft operating safely and efficiently worldwide. Requirements: • Assembles fabricated components to make subassemblies or assemblies for electrical or electronic systems using hand and electrical tools. Qualifications • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience • High school diploma or general education degree (GED); or one to three years related experience and/or training., • Experience with Electro/Mechanical assemblies is a plus, • Experience with wire strippers, crimping tools, and soldering Proficiency Skills • Ability to follow detailed written and verbal instructions in English., • Ability to read and understand technical drawings (blueprints)., • Experience reading and following Manufacturing Procedures or Specifications to accurately complete job assemblies., • Ability to perform repetitive assembly operations., • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals., • Ability to apply common sense understanding to carry out simple one or two step instructions. Ability to deal with standardized situations with only occasional or no variables., • Ability to work with various small tools and parts., • Ability to use wire strippers, crimping tools, and soldering irons., • Has good reading vision, color discrimination, and the ability to speak clearly. Computer Skills • Ability to use basic file systems to navigate to and open drawings, and manufacturing procedures., • Using scanner for time/attendance/work traveler. Physical Requirements • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel and reach with hands and arms. The employee must frequently lift and/or move up to 40 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job DescriptionDescription: Job Description: Electrical/Mechanical Inspector We are seeking a detail-oriented Electrical/Mechanical Inspector to join our team. The ideal candidate will be responsible for conducting electrical inspections of assemblies and sub-assemblies using documented test procedures. The role involves documenting test and inspection results in accordance with Company procedures and performing dimensional inspection on products using calipers, micrometers, and height gauges. Responsibilities: • Conduct electrical inspections of assemblies and sub-assemblies using documented test procedures., • Document test and inspection results in accordance with Company procedures., • Perform dimensional inspection on products using calipers, micrometers, and height gauges., • Perform visual and dimensional inspection on products per procedures., • Perform first piece inspection and in-process inspections., • Communicate with production supervisor/team leaders/operators regarding problems found during inspections., • Write non-conforming material reports for defective products., • Contribute to the continued development of test and troubleshooting techniques., • Perform other duties as assigned. Qualifications: • High school diploma or equivalent., • Previous experience in electrical/mechanical inspection preferred., • Proficiency in using calipers, micrometers, and height gauges., • Strong attention to detail and accuracy., • Excellent communication skills., • Ability to work effectively in a team environment., • Willingness to learn and adapt to new procedures. If you are a meticulous individual with a passion for ensuring quality and precision in electrical and mechanical inspections, we encourage you to apply for this position. Requirements: Requirements: • Conduct electrical inspections of assemblies and sub-assemblies using documented test procedures, • Document test and inspection results in accordance with Company procedures., • Perform dimensional inspection on product using calipers, micrometers and height gauges., • Perform visual and dimensional inspection on product per procedures., • Perform first piece inspection and in-process inspections., • Communicate with production supervisor/ team leaders/ operator's problems found during inspections., • Writes non-conforming material reports for defective products., • Contribute to the continued development of test and troubleshooting techniques., • Other duties as assigned. Qualifications: • Ability to conduct test procedures to published documents., • Ability to operate dedicated test rigs., • Ability to operate standard measuring equipment including DVM, Hi-Pot, Bonding resistance., • Ability to work with minimum technical and administrative supervision., • Background concerning the usage and care of precision measuring tools and equipment., • Ability to effectively read and understand blueprints, engineering documents, inspection manuals and procedures in English., • Must have experience using various mechanical inspection tools, such as micrometers and calipers. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Director of Quality 📍 Farmingdale, NY (Onsite) We’re partnering with a well-established manufacturing organization in the aerospace/defense space that’s looking to bring on a Director of Quality to lead and elevate their quality function. This is a high-impact role where you’ll own the Quality Management System, work directly with leadership, and play a key role in driving compliance, customer satisfaction, and continuous improvement across the business. What you’ll be doing: • Own and lead the company’s Quality Management System (QMS), ensuring alignment with AS9100 standards, • Drive the organization through AS9100 certification and ongoing compliance, • Lead internal audits, corrective/preventive actions (CAPA), and continuous improvement initiatives, • Partner with customers to address quality issues, complaints, and overall satisfaction, • Ensure compliance with ITAR and export regulations tied to government and defense work, • Oversee supplier quality and work cross-functionally with purchasing and operations, • Manage inspection, documentation control, calibration systems, and asset tracking, • Analyze quality metrics (defects, performance, trends) and report findings to leadership, • Lead and mentor the quality team while improving processes across the organization What they’re looking for: • 7–10+ years in quality leadership within aerospace, defense, or similar regulated manufacturing, • Strong hands-on experience with AS9100 / ISO 9001 (AS9120 is a plus), • Six Sigma certification (Green or Black Belt preferred), • Experience with ITAR compliance and government contract requirements, • Ability to lead audits, root cause investigations, and system improvements, • Comfortable reading engineering drawings and working with inspection tools, • Proven experience managing teams within a quality or inspection environment, • Strong communicator — able to work across all levels internally and externally Why this role stands out: • Direct visibility with leadership and customers, • Opportunity to build and shape the quality function, • Stable company with strong presence in defense/aerospace markets, • Hands-on leadership role (not just oversight)

Work Location: Baldwin County, New York Summary: The QMS Supervisor is responsible for overseeing the development, implementation, and ongoing maintenance of the Quality Management System (QMS) to ensure compliance with relevant industry standards and regulations. This role focuses on driving continuous improvement, managing audits, leading CAPA processes, and providing training to promote a culture of quality throughout the organization. Responsibilities: • Oversee the structure and maintenance of the QMS, ensuring all documentation and procedures comply with regulatory standards and organizational objectives., • Lead and coordinate internal and external audits, manage audit responses, and verify the effectiveness of corrective actions., • Conduct root cause analysis for non-conformances and customer complaints, implementing effective CAPA solutions., • Drive continuous improvement initiatives using lean methodologies, statistical process control, and data analysis to optimize efficiency., • Manage electronic QMS platforms and ensure document control processes are accurate, current, and compliant., • Align all quality programs and initiatives across the organization to maintain consistent standards., • Monitor compliance with customer and regulatory quality requirements, ensuring standards are met or exceeded., • Develop and report key QMS performance metrics to senior management, providing actionable insights for decision-making. Qualifications: • Minimum 5 years of experience in a leadership role within Quality Management Systems or Quality Assurance, preferably in the medical device industry., • Bachelor’s degree in Engineering, Life Sciences, Biomedical Engineering, Quality Management, or a related field; Master’s degree may substitute for 1 year of experience., • Strong knowledge of ISO 9001, ISO 13485, or AS9100:2016 standards., • Experience with root cause analysis tools, FMEA, SPC, and electronic QMS software., • Certified Internal Auditor (ISO 9001/13485) preferred., • Lean Six Sigma certification (Black Belt or Green Belt) preferred., • Excellent written and verbal communication skills for interfacing with customers and regulators., • Proven ability to lead and influence cross-functional teams and mentor others., • Strong analytical and problem-solving skills, with the ability to implement sustainable solutions., • High attention to detail in document review and compliance assessment., • Ability to work independently and collaboratively in a team environment., • ASQ Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE) preferred., • Experience in highly regulated industries such as medical device or pharmaceutical sectors preferred., • Experience with document control administration preferred. Published Category: Quality & Validation

Job Description CNC Machine Maintenance Engineer - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The CNC Machine Maintenance Engineer position is responsible for performing highly diversified duties to install, troubleshoot, repair, and maintain production and facility equipment according to safety, predictive, and productive maintenance systems and processes to support the achievement of the site’s business goals and objectives. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Perform highly diversified duties to install and maintain production machines and the plant facility’s equipment., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs of production equipment during machine service. Must have experience with Vacuum Braze Ovens., • Perform simple machinist duties and responsibilities., • Perform mechanical skills, including, but not limited to, mechanical, electrical, pneumatic, hydraulic, troubleshooting, and repair of production machines., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test, and make adjustments., • Perform regular preventive maintenance on machines, equipment, and plant facilities., • Perform a variety of plumbing maintenance and carpentry functions., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision., • Comply with safety regulations and maintain clean and orderly work areas. QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Technical Capacity., • Good Troubleshooting Ability., • Ethical Conduct., • Communication Proficiency., • Results Driven., • Initiative., • Valid Driver’s License., • Experience with the maintenance of CNC Machines or Vacuum Braze Ovens EDUCATION AND/OR EXPERIENCE • High school diploma/GED and completion of a craft apprenticeship, or an equivalent number of years of education and production maintenance experience., • 2+ years of manufacturing experience; some hydraulic, pneumatic, mechanical, and industrial skills with PLC experience, Industrial and Commercial electric, and HVAC., • AA in mechanical or electrical Engineering or a Certificate in Analytical Troubleshooting preferred. 5+ years in manufacturing/facilities maintenance preferred. PHYSICAL DEMANDS • While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Fine manipulation and repetitive motion may be required for some duties. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $110,000 to $125,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job DescriptionDescription: Aerospace Tool Designer Join our innovative aerospace engineering team as an Aerospace Tool Designer, where you will play a vital role in designing and developing essential tools that support the manufacturing and assembly of aircraft structural components. This position offers an exciting opportunity to contribute to the creation of high-precision tooling solutions that ensure quality and efficiency in aerospace production. Key Responsibilities: • Design, develop, and refine tools, jigs, fixtures, molds, and gauges used in aircraft manufacturing processes., • Support the entire tooling lifecycle, from initial concept and design reviews to procurement, production implementation, and documentation., • Collaborate with cross-functional teams to ensure tooling designs meet engineering specifications, safety standards, and production requirements., • Conduct design reviews and modify tooling based on feedback and testing results., • Maintain accurate documentation and configuration control for all tooling designs and revisions., • Assist in troubleshooting tooling issues during production and implement improvements as needed. Skills and Qualifications: • Strong understanding of manufacturing processes, materials, and aerospace standards in English., • Excellent problem-solving skills and attention to detail., • Ability to work collaboratively in a team environment and communicate effectively., • Knowledge of quality control and documentation procedures related to tooling. We foster a collaborative and innovative work environment that values continuous improvement and professional growth. Our company offers competitive benefits and opportunities to advance your career in the dynamic aerospace industry. Requirements: Key Responsibilities Tool Design & Modeling • Develop detailed 3D models and 2D drawings for a wide range of aerospace tooling, including assembly jigs, fixtures, molds, and gauges., • Design tooling solutions that support complex manufacturing and assembly challenges from concept through production., • Ensure all tooling designs comply with applicable engineering requirements, technical specifications, and company design standards. Software & Technology • Utilize CAD software such as Siemens NX, CATIA V5, and/or SolidWorks to create, modify, and maintain tooling designs., • Apply Geometric Dimensioning and Tolerancing (GD&T) principles to ensure accuracy, repeatability, and manufacturability., • Coordinate with internal manufacturing teams and external tooling vendors to support fabrication, validation, and delivery of tooling (experience working with proven external tool designers and manufacturers is a strong plus). Analysis, Quality & Compliance • Apply basic structural analysis principles and conduct research to validate tooling concepts and designs., • Ensure tooling meets quality, safety, ergonomic, and regulatory requirements., • Incorporate Design for Manufacturability (DFM) principles to ensure tools can be produced efficiently and cost-effectively., • Adhere to all company policies, safety standards, and applicable regulatory requirements. Project & Process Management • Manage the complete tooling design lifecycle, from concept development through release to production., • Participate in and lead design reviews; provide constructive feedback to peers and stakeholders., • Develop tooling usage instructions, maintenance plans, and evaluation criteria, including calibration and load-testing requirements., • Support methodization and standardization of tooling and processes to improve product quality and reduce manufacturing cycle times., • Collaboration & Communication, • Work closely with cross-functional teams including Engineering, Manufacturing, Operations, and Quality., • Communicate effectively with internal stakeholders and external vendors to ensure tooling requirements, schedules, and deliverables are met., • Demonstrate strong problem-solving skills, attention to detail, and clear written and verbal communication. Qualifications • Bachelor’s degree in Aerospace Engineering, Mechanical Engineering, Aeronautical Engineering, or a related field, with a minimum of four (4) years of aircraft tooling design experience., • In lieu of a degree, a minimum of eight (8) years of directly related aircraft tooling design experience., • Proven experience designing tooling for aerospace manufacturing or assembly environments is required. Safety Requirements • This position requires the use of approved safety footwear (ASTM F-2413 complaint) when accessing or working in production and workshop areas. This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

Job Description The Supplier Quality Engineer will be responsible for executing and expanding on key initiatives inside of the supplier quality organization. The Supplier Quality Engineer will be responsible for executing various supplier quality engineering related activities such as Compliance, Process, and Product Audits, MRB, FAI Witnessing, Review and Sign off, Problem Solving, Corrective and Preventive Actions, Supplier Performance Reporting and other Quality Improvement Activities. Job Responsibilities: • Assess suppliers manufacturing and quality processes through performing supplier audits following various standards depending on the type of audit. Audits may include but not limited to the following: AS9100 Compliance Audits, special processes, APQP audits, process, and product audits., • Lead and/or support MRB activities to achieve optimal disposition of non-conforming material and ensure that adequate corrective actions are implemented., • Perform on-site supplier visits for root cause analysis and verification of corrective actions of supplier quality issues, • Promote and facilitate the use of customer preferred techniques for continuous improvement such as Lean, Six-Sigma, Poka-Yoke, and Process Failure Mode and Effects Analysis (PFMEA), • Facilitate the escalation of unresolved supplier quality issues within assigned projects and suppliers., • Support suppliers in the evaluation of existing manufacturing or business processes, identification of opportunities for improvement, and development of solutions to optimize supplier performance using various problem-solving techniques., • Provide technical guidance and assistance to suppliers to solve process and product quality issues and improve internal and outgoing quality performance., • Develop and maintain detailed and accurate reporting of supplier performance and quality improvement progress. Report weekly and monthly on supplier progress to meet customer expectations., • Undertake special projects as required, • Develop and maintain strong relationships with internal and external stakeholders to ensure optimal performance., • Communicate efficiently and effectively with all stakeholders to ensure timely and effective responsiveness to abnormalities. Required Skills • 8+ years of hands-on experience as a Quality Engineer in an Aerospace Manufacturing Environment, • 5-8 years of FAI experience with AS9102 (FAI) standards at a quality engineering level., • Strong understanding of various Engineering Processes, Standard Drawings Conventions, Interpreting Drawing, Specifications, and GD&T, • 5-8 years' experience hands-on experience with the ISO9001 and AS9100 Quality Management Systems Processes, especially in Production, Quality, and logistics, • Knowledge of, (or hands-on experience preferred), with FAA, EAR, and ITAR standards and regulations, • Experience leading customer audits, • Strong verbal, written and communication skills, • Project management, time management, problem solving and organization, • Ability to work as an effective team member and lead other team members Additional Desired Skills: • Prior practical experience and implementation of Quality Engineering tools and systems such as: DOE, FMEA, SPC, RCCA, APQP, PPAP, controls plans, material control, process control, systems performance, product evaluation, MSA, metrology, automated measurement, and software is preferred. General Requirements • Ability to pass background and drug screen, • Valid drivers license and auto insurance required., • Vision exam is required prior to hire. Requirements are as follows:, • The General Vision Acuity Test shall be performed by an Oculist, Optometrist or other professionally recognized person. The following requirements shall apply., • Near Vision – Eyes meets Orthorater 8 (95% or Jaeger #2 at 12 inches), • Far vision – Eyes meets Orthorater 4 (76%) or Snellen Chart 20/50, • Color Perception – 6 of 9 Orthorater plates, • US Citizenship Required: TRIGO ADR AMERICAS can restrict hiring to US Citizens when government contracts require us to do so. 8 U.S.C. § 1324b(a)(2)(C). Additional Qualifications (Preferred): • Bachelor's degree from an accredited college in a technical discipline, (i.e., Industrial Engineering, Mechanical Engineering, Quality Management, etc.), • ASQ or equivalent professional certifications such as CQE, CQT, CQA, CMQ, CSQP …etc., • Six Sigma Green Belt or Black Belt Certification. WORKING CONDITIONS Productivity: Incumbents must perform work in an efficient, effective, and timely manner with minimal direction. Mobility: Incumbents are required to participate in assigned physical activities which may include light lifting and sitting for prolonged periods of time. Vision: Vision sufficient to read printed documents, computer screens, and observe behavior of others. Environment: Typical office conditions, directly working Quality management team, working with the SMS team, and external customers. Other Factors: Typical hours worked are Monday – Friday from 8:00 a.m. – 5:00 p.m. Incumbents may be required to work occasional extended hours and weekend overtime. The employee frequently is required to use hands or finger, handle, or feel objects, tools, or controls. The employee is occasionally required to stand; walk (approximately 1-2 miles a day); sit; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Employee will occasionally drive long distances to and from various suppliers as needed. The employee must occasionally lift and/or move up to 20 pounds. Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. The noise level in the work environment is usually moderate to high. BENEFITS: • 12 days paid vacation first year, increasing with service years, • 10 days paid sick time, • 11 paid holidays, • Healthcare insurance available: Medical, dental, vision, STD, LTD, critical illness, life insurance for self and dependents, • Champ Plan Wellness and Health, • Free to employees working minimum 20 hours/week with anticipated $30k/annual earnings, • Participation increases net take home pay $$$ in most instances, • Free wellness initiatives, • Free tele-health, • Free and discounted RX, • Auto enrollment (unless tax elections result in negative impact), • Eligible on the 1st of the month following 30 days of continuous employment, • Requires monthly 10-minute wellness activity participation, • 401k retirement savings with match, • Eligible on the first (1st) of the month following 90 days of continuous employment, • 100% match of 1st 3% contribution, • 50% match of next 2% contribution, • IMMEDIATE VESTING, • Company-provided cell phone, laptop, mobile wi-fi (for business use only), • Regular Hourly rate for travel time, • Direct Pay Travel arrangements for flights, hotels and rental cars, • Travel Reimbursements direct deposited with each payroll, • Federal rate Mileage reimbursement when driving personal vehicles on company business, • Per diem reimbursements for meals and incidentals, • $1500 EMPLOYEE REFERRAL BONUS, • Initial $750 paid upon hire of qualified referred employee (rehires excluded), • Additional $750 paid upon referral’s full completion of 90 days’ employment Pay Range $70,000-105,000 Annually. Please note that the salary information is a general guideline only. Trigo ADR considers factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market and business considerations when extending an offer. Company Overview TRIGO ADR Americas is the leader in the Aerospace & Defense Industry providing global Supplier Delivery Assurance, Supplier Development and Quality Management Services. Trigo provides a fully integrated service solution to optimize Supplier performance through an embedded “boots on the ground” business model to drive systemic changes that enhance Supplier Quality and Supplier Delivery performance. We work as an extension of our Customers to build and maintain supplier and customer collaboration to ensure improved results and provide visibility throughout the supply chain. Trigo’s team of dedicated Delivery Assurance Specialists, Supplier Development Specialists, Supplier Quality Engineers and Program Managers support hundreds of Customers and are deployed to thousands of Suppliers worldwide focused on achieving On-Time and On-Quality Delivery results. TRIGO ADR Americas is an Equal Opportunity Employer, including disabled and veterans, and may require US Citizenship for employment on certain defense contracts subject to ITAR restrictions. All qualified candidates will receive consideration. Except where otherwise provided by law, selection will be made without regard to, and there will be no discrimination because of race, religion, color, national origin, sex, political affiliations, marital status, non-disqualifying physical or mental disability, age, sexual orientation, gender identity, genetic information, membership or non-membership in an employee organization, or on the basis of personal favoritism or other non-merit factors. . Powered by JazzHR bG0xIH5Pqj

Job DescriptionDirector of Quality Farmingdale, NY (Onsite) We're partnering with a well-established manufacturing organization in the aerospace/defense space that's looking to bring on a Director of Quality to lead and elevate their quality function. This is a high-impact role where you'll own the Quality Management System, work directly with leadership, and play a key role in driving compliance, customer satisfaction, and continuous improvement across the business. What you'll be doing: • Own and lead the company's Quality Management System (QMS), ensuring alignment with AS9100 standards, • Drive the organization through AS9100 certification and ongoing compliance, • Lead internal audits, corrective/preventive actions (CAPA), and continuous improvement initiatives, • Partner with customers to address quality issues, complaints, and overall satisfaction, • Ensure compliance with ITAR and export regulations tied to government and defense work, • Oversee supplier quality and work cross-functionally with purchasing and operations, • Manage inspection, documentation control, calibration systems, and asset tracking, • Analyze quality metrics (defects, performance, trends) and report findings to leadership, • Lead and mentor the quality team while improving processes across the organizationWhat they're looking for:, • 7-10+ years in quality leadership within aerospace, defense, or similar regulated manufacturing, • Strong hands-on experience with AS9100 / ISO 9001 (AS9120 is a plus), • Six Sigma certification (Green or Black Belt preferred), • Experience with ITAR compliance and government contract requirements, • Ability to lead audits, root cause investigations, and system improvements, • Comfortable reading engineering drawings and working with inspection tools, • Proven experience managing teams within a quality or inspection environment, • Strong communicator - able to work across all levels internally and externallyWhy this role stands out:, • Direct visibility with leadership and customers, • Opportunity to build and shape the quality function, • Stable company with strong presence in defense/aerospace markets, • Hands-on leadership role (not just oversight)Pay Details: $120,000.00 to $150,000.00 per year Search managed by: Andrew Khanija Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.lhh.com/us/en/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance OrdinanceMassachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Quality Inspector - Garden City, New York Must have AS9100 Aerospace experience to qualify for the job About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding high-quality people, which is why we will conduct a screening to determine if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. EDUCATION AND/OR EXPERIENCE • High school graduate, • 3-5 Years mechanical inspection, aerospace experience, • Post high school education in math, engineering, inspection techniques or related fields a plus SUMMARY OF POSITION Responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Good communication skills, able to read and follow the Client’s work instructions and quality procedures. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions, • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment, • Prepare and maintain inspection reports, • Program and/or operate Coordinate Measuring Machine, • Perform Hardness testing, • Collect and tabulate data for SPC use, • Review Supplier F.A.I.R./Generate First Article Reports per AS9102, • Other duties as directed by the management QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Basic computer knowledge including MS Excel and Word, • Interpret drawing requirements/specs and geometric dimensions and tolerances, • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards, • PCDMIS programming skills, • Familiar with special process specifications for heat treat, welding, and non-destructive testing EQUIPMENT USED • Vernier calipers, • Micrometers, • Height Gauges, • CMM machines, • Other standard measuring tools/instruments, • Please note, all Production Floor employees are required to wear steel toe boots. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $55,000 to $75,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job DescriptionQuality Management Systems Supervisor Job Summary The Quality Management Systems Supervisor will oversee the development, implementation, and maintenance of the organization’s Quality Management System (QMS) to ensure compliance with industry regulations and standards (ISO 9001, ISO 13485, AS9100). Reporting to the Director of Quality Affairs, this individual will drive continuous improvement, support in leading in internal/external audits, manage CAPA processes, and provide cross-functional training to enhance quality awareness. Key Responsibilities • Manage the QMS structure, ensuring all policies, procedures, and Work Instructions (SOPs) are compliant with regulatory requirements and align with company strategic goals., • With guidance from the Quality Affairs Director, lead both internal and external audits (customer, registrar, regulatory), coordinate audit finding responses, and verify the effectiveness of corrective actions., • Lead root cause analysis (RCA) for non-conformances, customer complaints, and deviations, implementing effective Corrective and Preventive Actions (CAPA)., • Drive continuous improvement initiatives using lean methodologies, SPC (Statistical Process Control), and data analysis to enhance operational efficiency., • Manage the electronic Quality Management Systems (eQMS) and ensure Document Control processes are current, accurate, and compliant., • Confirms alignment of all Quality programs within the organization., • Monitor and ensure the organization’s commitment to quality meets or exceeds customer requirements and the relevant regulatory standards., • Develop, trend, and report key QMS performance metrics (KPIs) to senior management and provide solutions to guide data-driven decision-making., • Develop training materials and educate staff on QMS procedures, GMP (Good Manufacturing Practices), or regulatory compliance to cultivate a culture of quality., • Consistently review SOP and other services to improve quality and contain costs. Required Qualifications • Minimum of 5 years of experience in a leading role in Quality Management Systems or Quality Assurance in the medical device industry required (spine or neuro device companies a plus)., • Bachelor’s degree in Engineering, Life Sciences, Biomedical Engineering, Quality Management, or a related field. Master’s degree will be considered for 1 year work experience in related QMS field in medical device industry (preferably spine or neuro)., • Strong knowledge of ISO 9001, ISO 13485, or AS9100:2016 standards., • Leadership ability in root cause analysis tools, Failure Mode and Effects Analysis (FMEA), Statistical Process Control (SPC), and electronic QMS software., • Certified Internal Auditor (ISO 9001/13485) preferred., • Lean Six Sigma Certifications preferred (Black Belt and/or Green Belt)Required Skills & Competencies, • Excellent written and verbal communication skills for interfacing customers and regulators., • Proven ability to partner and influence cross-functional teams, lead/mentor through collaboration and influence without direct authority., • Strong analytical abilities to interpret data and implement effective, sustainable solutions., • Proficient in problem solving with independent thought and judgement while using resources both internally and externally., • Work efficiently and proactively cross functionally in a team setting while being sensitive to deadlines., • High level of accuracy in document review and compliance assessment., • Successful record of ability to work both independently and in a team environment., • Skilled in statistical quality methods, Lean principles, Six Sigma, and Root Cause Analysis for data-driven decision-making., • Determined and proactive mindset who is motivated to make a difference with a high standard of excellence.Preferred Qualifications, • ASQ Certified Quality Auditor (CQA) or Certified Quality Engineer (CQE)., • Experience in a heavily regulated industry (Medical Device or Pharma)., • Administration experience for document control. Salary Range: 95,000-105,000/annual An employment offer is based on the candidate's professional experience, specialty, skillset, education, geography, related licenses or certifications, and other business needs. The compensation range indicated does not include other forms of compensation or benefits. We value the diversity of our team and inspire creativity in our innovation. elliquence proudly provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any kind without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state and local laws. We are committed to working with and providing reasonable accommodation to individuals with disabilities. If you need any reasonable accommodation due to a disability for any part of the application process, please email hr@elliquence.com. Powered by JazzHR xLI3YJSudb

Job DescriptionDescription: Aerospace Precision Machinist Cox & Company, Inc. is seeking an outgoing and detail-oriented Machinist to join our manufacturing team. This role offers an exciting opportunity to work with advanced machinery and contribute to the production of high-quality metal workpieces. If you are passionate about precision manufacturing and enjoy working in a dynamic environment, we encourage you to apply. Key Responsibilities • Operate one or more machine tools, including special purpose machines and industrial 3- and 4-axis CNC machines, to produce metal workpieces according to specifications., • Read and interpret technical drawings, blueprints, and work orders to determine machining requirements in English., • Monitor machine operations, making adjustments as necessary to maintain quality and precision., • Perform routine maintenance and troubleshooting on CNC equipment to minimize downtime., • Maintain a clean and organized work area to promote safety and efficiency. Skills and Qualifications • Proven experience operating CNC machines, particularly 3- and 4-axis CNC equipment., • Strong understanding of machining processes, tools, and measurement techniques., • Ability to read and interpret technical drawings and specifications in English., • Good problem-solving skills and attention to detail., • Ability to work independently and as part of a team in a fast-paced environment. At Cox & Company, Inc., we value our employees and foster a culture of continuous improvement and growth. We offer competitive compensation, comprehensive benefits, and opportunities for professional development. Join us and be part of a team dedicated to excellence in manufacturing. Requirements: Role and Responsibilities • Interpret drawings (GD&T principles), manufacturing process specifications, and manipulate 3D models used in preparation for machining., • Employee is competent and trustworthy to safely perform with minimum supervision and meet the requirements of the Machine Shop., • Able to operate program and operate CNC. (Mastercam, Fusion 360), • Ability to use all Modern and Conventional (Bridgeport, lathe, drill press, press brake, etc) Machine Shop equipment., • Ability to Design and Fabricate jigs, fixtures, tools and dies for ease of machining or manufacturing parts in volume in a consistent and repetitive manner, • Ability to identify appropriate materials and tool hardness for varying applications and maintain shop supply inventory Qualification and Education Requirements • To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions, • 15+ Years experience in a Machine Shop, Tool & Die Maker. Engineering background preferred., • Ability to follow instructions., • Ability to read equipment manuals., • Extensive knowledge of soldering process and techniques., • Excellent organizational skills and attention to detail., • Excellent time management skills., • This position involves exposure to projects and contracts subject to the International Traffic in Arm Regulations (ITAR). As result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered. Supervisory Responsibilities • This position directly supervises one employee and carries out supervisory responsibilities in accordance with the organization’s policies and applicable laws. Proficiency Skills • Ability to calculate figures and amounts such as proportions, percentages, area, circumference, and volume., • Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. Safety Requirements • This position requires the use of approved safety footwear (ASTM F-2413 complaint) when accessing or working in production and workshop areas., • Safety Sensitive Position Computer Skills • MRP/ERP (Visual Manufacturing) experience or similar preferred, • CAD/Model based design software (solidworks, Fusion 360, Catia), • CAM Software programming (Mastercam, Fusion 360) Benefits • Competitive salary, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays, • Opportunities for career growth and development Physical Requirements • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions., • While performing the duties of this Job, the employee is regularly required to stand; use hands to finger, handle, or feel and reach with hands and arms. The employee must frequently lift and/or move up to 40 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Job Description Job Summary We are seeking a motivated and detail-oriented Junior Software Engineer to join our dynamic development team. In this role, you will assist in designing, developing, and maintaining software applications while collaborating with senior engineers to enhance our technology solutions. This position offers an excellent opportunity for growth and learning in a fast-paced environment. Duties • Collaborate with team members to design and implement web and application development projects., • Participate in the full software development lifecycle, including requirements gathering, coding, testing, and deployment., • Write clean, maintainable code using languages such as C#, Java, and Ruby on Rails., • Assist in troubleshooting and debugging applications to ensure optimal performance., • Contribute to Agile development processes by attending daily stand-ups and sprint planning meetings., • Utilize version control systems like SVN for code management., • Support IT infrastructure initiatives as needed, ensuring seamless integration of software solutions. Qualifications • Bachelor’s degree in Computer Science or a related field is preferred but not required., • Familiarity with web development principles and application development practices., • Basic understanding of Quantum engineering concepts is a plus., • Proficiency in programming languages such as C#, Java, or Ruby on Rails., • Experience with Agile methodologies and version control systems (SVN)., • Strong problem-solving skills and the ability to work collaboratively within a team environment., • Willingness to learn new technologies and adapt to changing project requirements. Join us as we innovate and create cutting-edge software solutions that make a difference! Job Type: Full-time Pay: $60,000.00 - $70,000.00 per year Benefits: • Green card sponsorship, • On-the-job training, • Visa sponsorship Compensation Package: • Hourly pay, • Weekly pay Schedule: • 8 hour shift Work Location: In person

Job Description Quality Engineer II - Massapequa, NY About our Client: Our Client is a global provider within a wide range of areas, including but not limited to aerospace and defense platforms, automation and manufacturing, and the medical and healthcare fields, all aiming toward advancing cutting-edge research and development. Higher Talent Group values its reputation for finding good quality people, which is why we will provide a screening to see if this is a good fit for you. We will share further details such as the culture, how progression works within the company, etc. SUMMARY OF POSITION The Quality Engineer II position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. SUPERVISORY RESPONSIBILITIES • This job has no supervisory responsibilities. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential duties and responsibilities of this position are listed below. This list is not all-inclusive and may be amended from time to time. • Working closely with Engineering to ensure that designs meet applicable quality requirements., • Plan and perform internal quality audits and execute action items., • Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams., • Conducting quality investigations., • Be an active participant in the material review board., • Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, needs and satisfaction., • Independently drive and direct actions with departmental groups to maintain MRB and RMA issues., • Drive key quality performance metrics: DPPM, OTD, Cost of Quality, Customer Scorecards, Internal Audit Risk and Effectiveness, Supplier Performance, Contract Review., • Source inspection liaison, • Travel to customer and supplier locations as required. SECONDARY DUTIES AND RESPONSIBILITIES • Supporting new product introduction programs by creating and maintaining the following, as required:, • Production Part Approval Process, • Advanced Product Quality Planning, • Zero Defects Program, • Control Plans, • Inspection Plans, • Inspection Reports, • First Article Inspection Reports, • Supplier Approval and Development, • Attend NPI meetings, including, • Preliminary Design Reviews, • Critical Design Reviews, • Make Buy Reviews, • Monitor the Progress of NPI programs through manufacturing and into production, • Conduct purchase order reviews related to NPI and production programs, • Interact with customers on NPI and production programs, • Engage in problem-solving with engineering, operations, and supply chain on NPI and production programs, • Support shipments of NPI and production programs, • Conduct internal audits, • Become a designated quality representative when required by the customer QUALIFICATIONS, KNOWLEDGE, SKILLS, AND EXPERIENCE REQUIRED • Knowledge of aerospace quality requirements and specifications., • Proven track record of partnering with manufacturing and engineering, • Experience with root cause analysis and corrective action. Experience with formal quality and operations systems., • Capable of reviewing and interpreting drawings, contracts / POs, and applicable processing standards., • Skilled at performing First Article inspections., • Proficiency with MS Office applications: Word, Excel, PowerPoint, and Outlook., • An understanding of the use and application of statistics and SPC., • Six Sigma preferred EDUCATION AND/OR EXPERIENCE • Bachelor’s Degree in Engineering required, • 9 to 10 plus years working in the aerospace and or automotive industry in a quality, engineering, or manufacturing capacity., • Previous experience in a high-mix, low-volume job shop, • Ability to manage priorities and meet deadlines in a fast-paced environment, • Working knowledge of ISO 9001:2015 and AS9100D Quality Management System processes., • Due to ITAR restrictions, an export license may be required OTHER SKILLS • Computer Literacy in Excel, Minitab, CAD, and Visio, • Advanced problem-solving and advanced data analysis techniques, • Knowledge in and experience in 8D problem-solving techniques, SPC, and statistical analysis PHYSICAL DEMANDS • Continuous periods of sitting at a desk and working on a computer and phone., • Prolonged time standing., • Must be able to occasionally lift 25 pounds at a time., • Frequently required to stand, walk, and reach with arms and hands. OTHER • Due to contracts with the United States Government, the candidate must be either a U.S. citizen or a Green card holder. COMPENSATION The anticipated salary range for this position is $100,000 to $120,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. Salary Disclaimer: Where a specific pay range is noted, it is a good-faith estimate only. At the time of this posting, the actual salary offered will be based on experience, skills, qualifications, market/business considerations, and geographic location. BENEFITS • Medical Plan, • Telehealth, • Prescription Drug Program, • Employee Assistance Program (EAP), • Dental Plan, • Vision Plan, • Retirement Plan with company match, • Paid Time Off, • Health Savings Account and/or Flexible Spending Accounts, • Life and AD&D Insurance, • Disability Insurance (Short and Long Term offerings) NOTE The above is presented as a matter of occupational information and guidance only; all other reasonable tasks, duties, and responsibilities that management may deem necessary for satisfactory performance may be included. ABOUT HIGHER TALENT GROUP Higher Talent Group offers candidates full-time opportunities at companies hiring nationwide. We also provide resume and career coaching services for individuals who require assistance in getting back into the workforce or for candidates who want to start looking for a new opportunity discreetly. Want to learn more? Check out our website for additional information. https://www.highertalentgroup.com

Job DescriptionDescription: Director of Quality Cox & Company, Inc. is seeking an outgoing and experienced Director of Quality to lead the development and implementation of our quality management system. This key senior role is vital in ensuring that our products and services consistently meet company standards, regulatory requirements, and customer expectations. The successful candidate will oversee quality teams and collaborate across departments to establish and maintain a culture of quality and compliance throughout the organization. Key Responsibilities • Develop, implement, and maintain the company’s quality management system in accordance with industry standards and regulatory requirements., • Lead and oversee quality assurance teams, providing guidance, training, and performance evaluations., • Collaborate with cross-functional departments such as production, engineering, and customer service to ensure quality and compliance are integrated into all processes., • Conduct audits, inspections, and reviews to identify areas for improvement and ensure adherence to quality standards., • Analyze quality data and metrics to identify trends, root causes, and implement corrective and preventive actions., • Stay current with industry regulations and standards, ensuring the company’s quality practices remain compliant., • Foster a culture of continuous improvement and quality awareness across the organization. Skills and Qualifications • Strong knowledge of quality standards and regulatory requirements relevant to the industry., • Excellent leadership, communication, and interpersonal skills., • Ability to analyze data, identify issues, and implement effective solutions., • Experience with quality management systems, audits, and process improvement methodologies., • Strong organizational skills and attention to detail. At Cox & Company, Inc., we value innovation, integrity, and teamwork. We offer a dynamic work environment with opportunities for professional growth and development. Join us in our commitment to delivering high-quality products and services that meet the highest standards of excellence. Requirements: Role and Responsibilities • Direct a staff of up to 25 people including engineers, technicians, inspectors, engineers and administrative personnel. Hire staff and provide training., • Develop and enforce quality systems to ensure compliance to consensus standards and customer requirements., • Monitor and communicate measurement of quality-related metrics to senior staff and advocate for improvements., • Communicate with customers regarding Quality compliance, complaints, audits, etc., • Collaborate with Purchasing on monitoring and improving vendor performance., • Drive continuous improvement initiatives to reduce waste, improve efficiency and drive a quality culture., • Manage budget. Minimum Qualifications • Education – Bachelor’s degree in a technical or management related field., • 10 years minimum experience in a direct QA role with progressive advancement into supervisory and managerial roles., • Direct experience with FAA regulatory rules and offices in the areas of certification, Parts Manufacturing Approval. Desired Qualifications • Direct experience in AS9100. Skills and Abilities • Ability to follow detailed written and verbal instructions in English., • Ability to work with minimal supervision in a high paced development environment., • Ability to direct and manage a department of up to 25 employees., • Knowledge of manufacturing and inspection processes and data systems., • Ability to interact at all levels of the organization, with customers and regulatory bodies in writing, verbally and in person, • Ability to type documents from drafts and markups., • Ability to file documents both physically and electronically. Safety Requirements • This position requires the use of approved safety footwear (ASTM F-2413 complaint) when accessing or working in production and workshop areas. Benefits • Competitive salary, • Health, dental, and vision insurance, • 401(k) with company match, • Paid time off and holidays This position involves exposure to projects and contracts subject to the International Traffic in Arms Regulations (ITAR). As a result, only U.S. Citizens or Permanent Residents (Green Card holders) are eligible for employment in this role. Applicants must meet these requirements to be considered.

DoorDash is the #1 category leader in food delivery, food pickup, and convenience store delivery in the US, trusted by millions of customers every day.As a Dasher, you’ll stay busy with a variety of earnings opportunities and can work when it works for you.Being a Dasher with DoorDash gives yo