Industrial electrician jobs in Cedar Grove, New JerseyCreate job alerts

Job Description We are an Electrical Company that works on Commercial, Industrial, and Material Handling Systems/Conveyors. Looking for an experienced Journeyman Electrician with at least 3yrs experience Requirements include; pipe bending, ability to work independently, and as part of a team Competitive pay, Insurance, 401K, Paid Holidays, Vacation, Sick Days Must have Drivers License

Job Description $35–$50/hour | New Jersey | Regional Travel Pfister Energy is seeking an experienced Solar Electrician to maintain, troubleshoot, and repair commercial and industrial solar PV systems throughout New Jersey and surrounding areas. We're looking for a skilled electrical professional with hands-on solar maintenance, electrical troubleshooting, and inverter repair experience who can work independently to keep solar systems operating safely and efficiently. What You'll Do • Perform preventive and corrective maintenance on commercial rooftop, carport, and ground-mounted solar PV systems., • Troubleshoot, diagnose, and repair inverters, combiner boxes, switchgear, AC/DC wiring, and monitoring systems., • Perform electrical testing using multimeters, insulation testers, thermal imaging, and IV curve tracers., • Respond to service calls, identify equipment failures, and complete repairs to restore system performance., • Read electrical schematics, single-line diagrams, and manufacturer specifications., • Follow NEC, OSHA, NFPA 70E, and lockout/tagout safety procedures., • Document inspections, repairs, and service reports while communicating with customers and internal teams. Who We're Looking For • 3+ years of electrical experience, including 2+ years working with solar PV installation, maintenance, or troubleshooting., • New Jersey Journeyman Electrician license or equivalent, or documented solar PV electrical experience with willingness to meet applicable licensing requirements., • Strong knowledge of AC/DC electrical systems, grid-tied solar PV, inverters, transformers, and electrical troubleshooting., • Experience reading electrical drawings, single-line diagrams, and wiring schematics., • Ability to independently diagnose electrical faults and perform safe, effective repairs., • Valid driver's license, clean driving record, and willingness to travel throughout NJ and neighboring areas., • Ability to work outdoors, on rooftops, at heights, and lift up to 50 lbs., • Preferred: OSHA 30, NFPA 70E, NABCEP certification, or experience with SCADA and solar monitoring systems. We Offer • $35–$50/hour, based on experience, • Prevailing wage opportunities, • Overtime opportunities, • Travel pay (when applicable), • Per diem (when applicable), • Lodging for eligible projects, • 401(k) with company matching, • Medical insurance, • Dental insurance, • Vision insurance, • Health Reimbursement Account (HRA), • Life insurance, • AD&D insurance, • Accident insurance, • Disability insurance, • Critical illness insurance, • Paid time off, • Paid holidays, • Company-provided PPE, • Company-provided tools and safety equipment, • Employee referral bonuses Apply Today! \nCompany Description Pfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law. Pfister Energy is a nationally recognized renewable energy company helping businesses control rising energy costs through turnkey onsite energy solutions. Since 2005, we’ve developed, designed, financed, and installed more than 900 MW of clean energy systems for commercial and industrial clients. Our expertise includes solar, storage, microgrids, EV charging, O&M, and asset lifecycle services. Known for trusted expertise and efficient execution, we deliver future-ready solutions that strengthen resilience, reduce costs, and support long-term sustainability goals.\r\n\r\n\r\nWe are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local law.

Job Description Digistallers Inc. is an open platform for Digital Signage, Audio Video Technicians, and Electrical Engineers, who are seeking contractor work. We are seeking a licensed and experienced Electrician Contractor to lead and manage electrical installations, repairs, and maintenance projects. The ideal candidate will have a strong background in residential, commercial, and industrial electrical work, with the ability to oversee teams, ensure quality compliance, and deliver projects on time and within budget. We deploy contractors across the New York Tri-State Area, CT, Pennsylvania, and New Jersey, and we are actively hiring contractors to train and deploy immediately to work orders. If you are interested in growing your career , please contact Lynn at 917-302-6449 or Charlie at 917-524-6129. You must meet the below requirements to be considered for contractor work. • MUST HAVE A FRIENDLY & PROFESSIONAL ATTITUDE!!!!!!!!!!, • Must be legally permitted to work in the USA., • Read and interpret blueprints, technical diagrams, and specifications, • Ensure all work adheres to local electrical codes and safety standards, • Estimate materials and labor required for projects, • Troubleshoot and resolve complex electrical issues, • Collaborate with clients, suppliers, and other tradespeople, • Must know how to troubleshoot offline media players (CAT 5 / 6 Tester)., • Must have Digital Menu Board experience., • Must have own tools., • Must have own laptop., • ABSOLUTELY MUST own truck, SUV, or mini van. Experience with the following: • MUST HAVE EXPERIENCE Mounting TV/Screens. (Do Not Apply if you don't have this experience)., • Previous work experience with cable installation is a plus., • Valid electrician license/contractor license in [State/Region], • Proven experience as an electrician, with leadership/contracting experience preferred, • Strong knowledge of electrical systems, tools, and safety procedures, • Ability to read schematics and technical diagrams, • Excellent problem-solving and communication skills, • Valid driver’s license and reliable transportation, • Fiber experience a plus. Company DescriptionDigistallers Inc. is an open platform for Digital Signage & Audio Video Technicians, who are seeking contractor work. We deploy contractors across the New York Tri-State Area, and we are actively hiring contractors to train and deploy immediately to work orders.Digistallers Inc. is an open platform for Digital Signage & Audio Video Technicians, who are seeking contractor work. We deploy contractors across the New York Tri-State Area, and we are actively hiring contractors to train and deploy immediately to work orders.

Job Description URGENTLY HIRING HIGH VOLTAGE ELECTRICIANS FOR A LEADING AEROSPACE COMPANY! Pay: $38 - $40 Location: Dover, NJ Shifts: 2nd, 3rd, and weekend (apply for details) Responsibilities • Perform electrical repairs and preventative maintenance on site equipment and electrical systems to minimize downtime and maintain safe operations., • Locate and repair electrical failures and malfunctions on equipment such as heaters, elements, fuses, lights, contacts, and related components., • Repair and install electrical systems and equipment including motors, transformers, wiring, alarm systems, automatic control systems, and industrial controllers., • Rebuild motors, including replacing bearings and servicing armatures, to restore proper functionality., • Understand and apply electrical schematics and blueprints to troubleshoot electrical systems, programmable logic controllers (PLCs), and associated automated systems., • Work with robotic controllers, pneumatic and hydraulic modules, and electromechanical sensing devices as part of automated system maintenance and repair., • Perform new electrical installations based on schematics and blueprints, including pulling wire, bending conduit, and completing electrical wiring and terminations., • Install, wire, and troubleshoot PLCs and variable frequency drives (VFDs) as part of industrial automation systems., • Assist in training less experienced electrical personnel by sharing knowledge of troubleshooting techniques, safety practices, and equipment operation., • Communicate effectively with equipment operators to explain programs, system status, and required actions to ensure proper equipment use., • Maintain frequent internal contact with manufacturing teams to coordinate work, and external contact with contractors and suppliers as needed for projects and repairs., • Properly complete and adhere to all safety procedures and training requirements established for maintenance personnel., • Perform all duties of an A Electrician when necessary to support operations and maintenance needs.Job Type & Location This is a Permanent position based out of Clifton, NJ. Pay and Benefits The pay range for this position is $73840.00 - $73840.00/yr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Benefits: You will be eligible to participate in the Companys employee benefit plans offered at your location, including health care, life insurance, and disability coverage. Details of these plans will be sent to you separately upon hire or completion of probationary period if applicable. 401k Plan: The Company offers a tax qualified 401(k) savings plan to help you save toward retirement. Details will be sent to you separately and are subject to plan terms and conditions. Current company contributions are: 3% of your eligible compensation regardless of whether you contribute to the plan, and 100% of your deferred pre-tax savings up to 6% of your base pay. Vacation: You will be eligible for 10 days of paid vacation per year, accrues as per policy (prorated based on your hire date) in accordance with the Companys Vacation Policy, in addition to Company recognized holidays. Job Type & Location This is a Permanent position based out of Clifton, NJ. Application Deadline This position is anticipated to close on Oct 23, 2026. Workplace Type This is a fully onsite position in Clifton,NJ. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools.

Company Description MDC ELECTRICAL CONTRACTOR LLC is an established electrical contracting company based in Harrison, New Jersey, serving clients throughout the greater Newark area and beyond. The company provides a range of electrical services, including installation, maintenance, and project-based contracting for commercial, industrial, and residential customers. MDC ELECTRICAL CONTRACTOR LLC focuses on reliable workmanship, safety, and code-compliant solutions that meet client schedules and budgets. Team members have the opportunity to work on diverse projects and contribute to the company’s continued growth in the region. Role Description The Electrical Project Manager is a full-time, on-site role located in Newark, NJ, responsible for overseeing electrical projects from initial planning through completion. In this position, the individual coordinates project schedules, manages budgets, and supervises field teams and subcontractors to ensure work is completed safely, on time, and within scope. Day-to-day tasks include reviewing electrical designs and drawings, organizing materials and labor, monitoring project progress, and resolving technical or logistical issues that arise on site. The role also involves communicating with clients, inspectors, and internal stakeholders, maintaining accurate documentation, and ensuring compliance with relevant codes, standards, and company policies. Qualifications • Strong knowledge of electricity and practical experience in electrical contracting., • Ability to review and oversee electrical design in coordination with electrical engineering principles., • Proficiency in project budgeting, cost control, and financial tracking for electrical projects., • Experience managing field crews, subcontractors, and scheduling in a construction or contracting environment., • Familiarity with local and national electrical codes, safety regulations, and inspection requirements., • Effective communication, organization, and problem-solving skills, with attention to detail and documentation., • Prior experience as an Electrical Project Manager, Foreperson, or similar role in the electrical industry preferred., • Relevant technical training or degree in electrical engineering, construction management, or a related field; licensed electrician or equivalent certification is a plus.

Job Description #jobalert | DIRECT HIRE | ELECTRICAL ESTIMATOR | ELECTRICAL CONTRACTOR | Northern NJ (NYC Metro) A privately owned union electrical contractor in the NYC metro area is adding an Electrical Estimator to a tight, senior-led estimating team. Most of its work is mission critical data centers and hospitals, with commercial, industrial, and traffic projects alongside, and bids run from small service jobs to nine-figure data centers. Large bids are built as a team, with each estimator taking assigned systems that roll into one number, and specs are read line by line. This is a fully on-site role, Monday through Friday. For a detail-driven estimator, it offers bigger projects, a close-knit team, and room to move up as the company keeps growing. • Anticipated $130K-$150K, based on experience, • Benefits include: Employer-paid Health (employee and family), Dental, Vision, 401K w/ match, PTO, holidays, • Year-end profit-sharing bonus, discretionary, • Monday through Friday, 7:30 AM to 4:30 PM, on-site Overview: • Own the electrical bid from plan review to submission on mission critical, healthcare, commercial, and industrial projects., • Take off quantities and price labor, material, and equipment so the bid wins work and still makes money., • Solicit, level, and compare vendor and subcontractor quotes, and tell project management where the risk sits., • Work large bids as part of a team, taking assigned systems and merging them into one clean estimate., • Catch spec and addenda issues before bid day, including redundancy scope and active-facility requirements in hospitals., • Attend pre-bid meetings and site visits., • Support conceptual budgets, design-build proposals, and change order pricing., • Keep historical pricing and labor productivity data current so the next bid is sharper than the last. Preferred skills and experience: • Associate degree in Engineering, Construction Management, or a related technical field (preferred, not required), • Valid driver's license and ability to travel to project sites, • Strongly Preferred - Electrical estimating experience at an electrical contractor, ideally 5 or more years, • Strongly Preferred - Mission critical, data center, or healthcare estimating experience, • Hands-on takeoff and pricing in estimating software such as Accubid, McCormick, or Conest, • Bluebeam Revu for document review and quantity takeoff, • Experience with digital takeoff and estimating platforms, • Commercial, industrial fit-out, laboratory or pharmaceutical, and traffic signal or streetscape estimating experience, • Experience on complex, fast-track, and multi-phase projects, • Familiarity with the New Jersey and New York markets, labor conditions, and permitting, • Field experience as an electrician, foreman, project engineer, or superintendent is a plus, • Proficient in Excel and Word Keywords: electrical estimator, senior electrical estimator, electrical estimating, preconstruction, takeoff, quantity takeoff, bid preparation, Accubid, McCormick, Conest, Bluebeam, Bluebeam Revu, mission critical, data center, healthcare construction, hospital, commercial electrical, industrial electrical, electrical contractor, IBEW, design-build, change order pricing, subcontractor leveling, vendor quotes, labor productivity, value engineering, Northern NJ, New Jersey, NYC metro EEO

Job DescriptionJob Summary: Instrument and Controls Engineer:The Instrument and Controls Technician is involved with the successful daily operation of the oil refining facility, and the modification and alteration of the plants automated control and power systems to accommodate business needs and ensure high plant availability. This requires close collaboration with other employees and management staff to ensure safe work and to set or re-set job priorities. Documentation, as required to document changes in plant physical or logic changes, and documentation to meet our goals of safety first, quality work and compliance with our customers’ requirements and concerns. Qualifications: Instrument and Controls Engineer: • High School Diploma or GED with at least 10 years I&E (I&C) experience in a chemical, food, pharmaceutical manufacturing environment. Familiarity with PLC based controls systems such as GE or Allen Bradley in a manufacturing environment., • Ability to analyze and interpret technical problems related to instrumentation or PLC logic., • Ability to read and understand company policies and procedures, technical datasheets or literature, P&IDs, electrical drawings (One-line drawings, loop drawings, control circuits, etc), • Ability to effectively present information either verbally or via written document (e-mail, MS Word/Excel, CMMS, etc) and respond to questions from groups of managers, co-workers, customers, and the general work force., • Ability to work with and apply mathematical concepts to practical situations., • Preferred: New Jersey Licensed Electrician (or working towards license), • Preferred: ISA Certification (Certified Control System Technician, Certified Industrial Electrician, Certified Instrument Technician)Duties & Responsibilities: Instrument and Controls Engineer:, • Monitor, repair, maintain and troubleshoot all field instrumentation, electrical equipment and controls systems including plant safety systems and plant power systems., • Install, loop check, maintain and troubleshooting process control systems comprised of transmitters, controllers, and valves operating in a PLC system., • Calibrate, monitor, repair, maintain, label and document all field instruments such as transmitters, controllers, valves, PLCs, plant safety systems, plant power systems, utility systems (HVAC), pH and conductivity meters, • Install, maintain, and troubleshoot electrical distribution and protection circuits up to 480VAC., • Fabricate and install rigid and flexible conduit, and run power and control wiring based on electrical code requirements, • Properly select, install and wire 120V-480V motors, single phase to three phase based on needs, • Strong working knowledge of National Electrical Code (NFPA 70), • Evaluate current instrumentation technology for process equipment and make recommendations for improvements., • Ensure all work orders are completed, documented and closed out in the site CMMS system, as per procedure., • Provide on-call support during assigned weeks to ensure 24/7 coverage, • Provide practical solutions to operations/ controls problems., • Scope, estimate and execute small capital / maintenance projects along with maintenance manager/ project director/ operations, etc., • Train other employees considering their needs and company needs., • Oversee the work by contractors as required on site to ensure safe and quality performance., • Look for opportunities to help work get done safer, faster and more cost effectively. Onsite Personnel is an equal opportunity employer committed to hiring a diverse workforce in an inclusive culture environment. Onsite Personnel does not discriminate based on disability, veteran status or any other basis protected under federal, state, or local laws

Lead and supervise crews of approximately 5-10 electricians and laborers on job sites. Foreman-level electrician experience on commercial or industrial projects. The setting is a typical commercial construction environment, involving regular use of lifts, conduit tools, and standard electrician equi

Whether you're creative, strategic, persuasive, or mechanically inclined, there's a place for you here. Be a problem-solver, a closer, a futurist - whatever drives you. At ProMach, you'll be challenged and rewarded as you help improve packaging performance and shape the future of automation. And we'll be proud to have you on the journey. Pace Packaging is seeking a skilled Electrician to join its Production team in building and supporting advanced packaging automation systems. This role involves reading electrical schematics, building and wiring control panels, installing field wiring, and troubleshooting equipment to ensure optimal performance. The Electrician will collaborate with engineering teams to debug systems, update electrical drawings, and support both electrical and mechanical installation and maintenance, contributing to high-quality, efficient operations. Responsibilities: • Build Electrical Control Panels, • Install Machine Wiring, • Install Field Wiring, • Troubleshoot Systems, • Redline Electrical Prints, • Assist in mechanical assembly and installation, • Assist with facilities and equipment related maintenance and installation Qualifications: • Previous work experience in dealing with AC motors, motor starters, disconnects, and PLC I/O wiring required, • Experience in industrial electrical panel and machine wiring, • Ability to read Electrical Drawings, • Ability to read and understand Electrical Engineering drawing sets, • Ability to read blueprints and electrical schematics created on AutoCAD, • Strong understanding of safe electrical practices, • Deep understanding of wire sizes for industrial machine wiring, • Hands-on experience reading/interpreting bill of materials (BOMs), • Advanced Microsoft Office skills, • Excellent communication skills, both written and verbal, • Demonstrated ability to multitask, prioritize, and meet timelines on deliverables, • Excellent attention to detail, • Ability to define problems, collect data, and draw valid conclusions, • Must know how to use basic hand tools cordless drill; pneumatic tools, socket set, wrenches, open end and box end, screwdrivers regular and Phillips and pliers regular and channel lock What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. Total compensation includes your salary, comprehensive medical/dental programs, as well as life insurance, a generous paid time off program, and a retirement savings plan with a company match. And because we understand the importance of feeling protected, there is no waiting period for benefits you are eligible on your first day of employment! Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally, with the personal touch and feel of a smaller company where you can make an impact every day. ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Base hourly rate: $22-$32/hr

Maintenance Senior Industrial Electrician Richards Manufacturing Company is a producer of electrical and gas distribution equipment for utility and commercial/industrial markets. For over 70 years Richards has served the industry with quality, dependability, and outstanding customer service. With humble beginnings as a family owned and operated businessoriginally entering the market as a producer of a single style of underground connectorRichards has evolved to offer a wide selection of products across several product lines. Our offices and manufacturing facilities are located in Irvington, NJapproximately 14 miles west of New York City. We are seeking a skilled Senior Industrial Electrician with a New Jersey Class A Journeyman Electrician license to oversee and guide other electricians and ensure the optimal functioning of all equipment and machines at our facility. The Industrial Electricians install, maintain, and repair industrial equipment and parts. Be able to understand and make decisions based on technical documents, such as blueprints, schematics, or instructions. This position requires extensive knowledge of electrical components as well as electrical safety codes and regulations. They must be professional, technical, and mechanically proficient, also be able to operate tools near electrical components. We operate a safe, clean facility and consider security and safety our top priorities, so we are looking for a professional whose values reflect our own. Reports to: Maintenance Manager Location: Onsite, Richards Manufacturing Facility (Irvington, NJ) Hours: Full Time, including Saturdays Key Responsibilities: • Oversee and guide other electricians in the department, to ensure compliance with safety code and regulations., • Installing, repairing, and maintaining electrical industrial and facilities equipment., • Interact with work instructions and maintain parts inventory from a computer., • Performing scheduled inspections, servicing, and testing of equipment, PM., • Maintains a safe and clean working environment by complying with procedures, rules and regulations., • Read and understand electrical schematics and blueprints., • Troubleshooting malfunctions., • Contributes to team effort by accomplishing related results as needed., • Work overtime as needed., • Perform and approve LOTO permits., • Perform and approve shock & arc flash risk assessments., • Assist and / or facilitate the completion by 3rd party supplier a electrical power systems study to include device coordination, short circuit analysis, & incident energy analysis., • Strong knowledge of NEC, NFPA 70E, NFP79, and OSHA safety practices., • Experience in A/C 120/208/480 Volts 3 phase systems D/C 12/24 Volts., • Proficiency installing and bending EMT. Required: High school diploma or General Education Degree (GED) • Required: Class A Journeyman Electrician License, NJ, • Required: Electrical Safety & Arc Flash Training, • Preferred: Electrical Technology or Engineering Degree, • Preferred: Electrical Certifications demonstrating ability to perform Hand-On maintenance Company's Quality Management System • ISO 9001:2015 awareness, • Electrical Safety & Arc Flash Experience PLC Program and Troubleshooting (Allen-Bradley, Mitsubishi, Siemens). • An ability to work well under pressure., • Teamwork and problem-solving skills., • Efficiency and organization., • Knowledge of electrical systems, hand tools, and industrial equipment., • Knowledge of hydraulics is a plus., • Ability to read schematics, blueprints, and other technical documents., • Willing to perform physically demanding tasks, such as lifting heavy objects, climbing ladders, crawling, etc. per OSHA guidelines., • Both English and Spanish speaking applicants will be a plus., • Good communication and time management skills.

Join our team as an Industrial Mill Electrician and play a vital role in powering our heavy industrial operations. Journeyman Electrician certification or equivalent experience is required.

Job Description We are seeking experienced B Level Generator Field Service Technicians in the Northern Jersey areas for our Power Generation Client!! Pay is $37 - $44/hr depending on experience, plus overtime, full benefits, and sign-on bonuses at many of our employers. Day shift, Monday to Friday, plus an on-call rotation for emergency service. Are you the person for the job? If you can run your own service calls on commercial and industrial generators, you are in demand right now, and the pay reflects it. What you will do: • Service, troubleshoot, and repair commercial and industrial generator sets through roughly 1MW, • Perform startups, commissioning, and scheduled maintenance across a route of accounts, • Work through generator controls, transfer switches, and starting and charging faults, • Keep accurate service records What we are looking for: • 3+ years on generators, or heavy-duty diesel with real electrical aptitude, • Able to read a wiring diagram and follow a circuit without hand holding, • Experience on any major generator brand, Kohler, Cummins, Cat, MTU, or Generac, • Your own hand tools, valid driver license, willing to carry an on-call rotation Why apply through LaTrae: • We place generator and critical power techs all day, so we know these employers and these roles, • A direct line to hiring managers, faster than applying cold, • Always free to you, the employer pays our fee, • Confidential, your current employer never knows you are looking Generator Technician, Generator Field Service Technician, Generator Service Technician, Power Generation Technician, Standby Power, Emergency Power, Critical Power, Backup Power, Diesel Generator, Natural Gas Generator, Genset, Gen Set, Switchgear, Paralleling Switchgear, Automatic Transfer Switch, ATS, Load Bank, Load Bank Testing, Commissioning, Startup Technician, EGSA, EGSA Certified, Kohler, Cummins, Onan, PowerCommand, Caterpillar, Cat, MTU, Detroit Diesel, Generac, Woodward, Deep Sea Electronics, DSE, ComAp, Basler, UPS Technician, Critical Facilities, Critical Environment Technician, Data Center Technician, Prime Power, 12P, 91D, Marine Generator, Diesel Mechanic, Diesel Technician, Diesel Tech, Industrial Maintenance, Maintenance Electrician, Electrician, Apprentice, Universal Technical Institute, UTI, Lincoln Tech, WyoTech, Military Technician, Veteran Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance, • 401(k) Schedule: • 8 hour shift, • 10 hour shift, • Day shift, • Monday to Friday, • On call, • Overtime, • Weekends as needed

Job Description We are seeking an experienced A Level Generator Field Service Technician in Northern Jersey areas for our Power Generation Client!! Pay is $42 - $50/hr depending on experience, plus steady overtime (techs average about 55 hours a week, paid after 40), full benefits, and sign-on bonuses at many of our employers. Day shift, Monday to Friday, plus an on-call rotation for emergency service. Are you the person for the job? If you can troubleshoot megawatt class gen sets, transfer switches, and generator controls, you are in demand right now, and the pay reflects it. What you will do: • Diagnose, repair, and commission diesel and gas generator sets from small standby units through 2MW and larger, • Troubleshoot automatic transfer switches, generator controls, and switchgear, • Run startups, load bank testing, and site acceptance on new installations, • Keep accurate service records and get critical sites back online fast What we are looking for: • 7+ years on industrial generators, or heavy-duty diesel with strong electrical controls depth, • Comfortable inside switchgear and control panels, reading prints and schematics, • Factory training on Kohler, Cummins, Cat, MTU, or Generac, EGSA certification a plus, • Your own hand tools, valid driver license, willing to carry an on-call rotation Why apply through LaTrae: • We place generator and critical power techs all day, so we know these employers and these roles, • A direct line to hiring managers, faster than applying cold, • Always free to you, the employer pays our fee, • Confidential, your current employer never knows you are looking Generator Technician, Generator Field Service Technician, Generator Service Technician, Power Generation Technician, Standby Power, Emergency Power, Critical Power, Backup Power, Diesel Generator, Natural Gas Generator, Genset, Gen Set, Switchgear, Paralleling Switchgear, Automatic Transfer Switch, ATS, Load Bank, Load Bank Testing, Commissioning, Startup Technician, EGSA, EGSA Certified, Kohler, Cummins, Onan, PowerCommand, Caterpillar, Cat, MTU, Detroit Diesel, Generac, Woodward, Deep Sea Electronics, DSE, ComAp, Basler, UPS Technician, Critical Facilities, Critical Environment Technician, Data Center Technician, Prime Power, 12P, 91D, Marine Generator, Diesel Mechanic, Diesel Technician, Diesel Tech, Industrial Maintenance, Maintenance Electrician, Electrician, Apprentice, Universal Technical Institute, UTI, Lincoln Tech, WyoTech, Military Technician, Veteran Job Type: Full-time Benefits: • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance, • 401(k) Schedule: • 8 hour shift, • 10 hour shift, • Day shift, • Monday to Friday, • On call, • Overtime, • Weekends as needed

A valid electrician's license is required. We are seeking a skilled and experienced Journeyperson Electrician to join our team. Install, maintain, and repair electrical systems and equipment in residential, commercial, or industrial settings.

Sims Metal - - Responsibilities: Assist with troubleshooting, repairing, and maintaining electrical systems; Support maintenance on shredders, conveyors, motors, and machinery; Replace electrical components including switches, sensors, relays, contactors, wiring; Perform preventive maintenance and

Junior Industrial Electrician - 1st Shift - $28-$30/hr. This is an excellent opportunity for someone with basic electrical experience who wants to develop their skills in industrial maintenance while working alongside experienced electricians and maintenance professionals. Work alongside senior elec

CCS Construction Staffing is actively hiring Industrial Electricians in Louden, TN for full-time work.

Diesel Mechanic, Heavy-Duty Shop Technician.Apply Direct or Call the Hiring Manager for this Position!.Immediate Position available for full-time Heavy-Duty Shop Technician in our Suffern, NY repair facility.This position will share the responsibility for upkeep and maintenance on the fleet of over

Experienced in industrial electrical troubleshooting.

Maintenace Mechanic - Water Bottling Plant - Wayne, NJ Maintenance Technician Mechanic Electrician Beverage Bottling Water Filtering Mixers Blenders Carbonators Automated Bottle Fillers Cappers Labelers Boxers PLCs HMIs Motors Rotary & Linear Motion Componenets Hydraulics Pneumatics _. CONSIDERED EX

Reconstruction Project Manager.Manage complex reconstruction projects from disaster to delivery.Lead teams, own profitability, and restore communities across the Tri-State area.We're primarily seeking candidates in Northern New Jersey (Carlstadt office) or New York City (Queens office).Strong candid

Soaringwords is an exciting, growing non-profit organization whose mission is to inspire individuals to take active roles in self-healing in order to experience greater physical, mental, and emotional wellbeing.Soaringwords seeks a self-starter, adept at project management, logistics, and organizati

Five or more years of industrial maintenance experience in a manufacturing environment. Technical school coursework, an apprenticeship, or certification in industrial maintenance, electrical, or mechanical disciplines is preferred.

We are partnering with a national general contractor who is a specialist in large-scale retail projects to hire a Construction Project Manager in New Jersey.Support the site and project management teams with day-to-day construction activities.Manage and maintain plans, submittals, RFIs, and other pr

New Jersey-based General Contractor with 35+ years of experience delivering large-scale commercial, institutional, educational, and government projects throughout the state.We are looking for an experienced.Manage projects from ground-up through closeout, including schedule, budget, contracts, and o

Comfortable working around machinery, conveyors, and industrial equipment.

Experience in injection molding, a toolroom, industrial maintenance, mechanical assembly, or a technical training program is helpful, but we're most interested in finding someone with the right mechanical skills, work ethic, and desire to learn.

Heavy Highway and Infrastructure.This is an incredible opportunity to join one of the.Lead full lifecycle project management for large-scale projects, from preconstruction through closeout.Serve as primary point of contact for owners, agency representatives, engineers, and subcontractors.Oversee pro

Project Manager Opportunity | Hudson County, NJ 🚨.We are partnering with a well-established Tri-State General Contractor with a family-led, developer-builder approach and a strong track record delivering ground-up high-rise residential developments throughout the region.With a growing pipeline of

Project Manager / Coordinator – Trade Shows & Experiential Environments.We are seeking a highly organized, mobile, and proactive.Moving far beyond static retail displays, you will be the operational linchpin coordinating trade show booths, temporary pop-ups, country pavilions, and retail window in

Project Manager – Industrial Manufacturing. Working knowledge of fabrication, machining, or industrial production environments.

Project Management, Business Analysis, or related roles within Financial Services/Capital Markets.Strong understanding of Capital Markets and financial risk concepts.Experience with one or more of the following:.Understanding of regulatory frameworks such as Basel, CRR, and CRD IV.Experience working

Our client is seeking an experienced Industrial Maintenance Mechanic for the 1st shift to join their unionized manufacturing team, performing repairs and maintenance on a variety of production and utility equipment.

Vulnerability management, AI models , co-pilot experience.Technical resource but have be excel and PowerPoint guru (Vlook up etc).Strong governance and regulation experience.Knowledge around cloud and containers.Has to be someone at the right level - they have to be able to work with little directio

The PM will support vendor risk assessment, process assessment, and SSO initiatives.Strong project management skills with the ability to manage teams and stakeholders effectively.Ability to identify risks and dependencies across workstreams.Broad cybersecurity background — depth not required, but

Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. We are professionals in Industrial Maintenance and we make factories run better.