Mechanical project manager jobs in Elizabeth, New JerseyCreate job alerts

Job Description Summary The Machine Operator for Bud's Goods of New Jersey is responsible planning, operating, and maintaining equipment at our facility in Linden, New Jersey. The primary operations of the facility will be the packaging of cannabis and cannabis products as a service to clients of the company. The Machine Operator is responsible for leading and organizing a team of packaging techs in support of day-to-day machine operations. The Machine Operator must be able to operate and oversee specialized automated packaging equipment and to keep the equipment clean and running efficiently at all times. This role's success relies heavily on the successful operation of the facility's automated packaging equipment, therefore an understanding of mechanical and electrical systems is required. The Machine Operator's goal is for total client satisfaction and works hard to always adhere to Bud's Goods' high standards for quality and service to our clients and the terms of our client agreements. This role is responsible for the sanitation and proper batch change procedures to avoid potential contamination ensure our clients are provided safe and controlled products. The Machine Operator reports to the Packaging Manager and works closely with the Vault Manager. This role reports to Linden, New Jersey, Monday through Friday. Job Duties • Responsible for pre-shift assessment in conjunction with the Packaging Manager to assess work already completed and what work will be designated to run for the day., • Responsible for determining the work flow sequence to minimize changeovers., • Stages product work flow so it is ready for processing after pre-shift briefing to techs., • Provide leadership, direction, and supports Packaging Tech(s) assigned to their operating line for all operating activities including production runs, startups, changeovers and shutdowns., • Direct assembly or disassembly, and cleaning as required for shift start and end operations., • Work closely with Labeling Tech and Packaging Manager to prepare labeled containers (pouches, tubes, jars etc) in advance of production runs so that labeled product is not the bottleneck to production capabilities., • Conduct beginning and end of shift quality checks to verify the exiting product matches finished product specs. Quality checks may include weight verification, seal integrity, legibility etc., • Validate Product through every change of Metrc tag. Bagged product matches labor sheets and recipient bins so as to not mix products. Operator ensures finished product is adequately labeled and isolated to prevent mixed product., • Responsible for capturing operational data required on a labor sheet including hours, waste, residual product for handpack / shake and any non-cannabis waste., • Troubleshoot mechanical issues as they arise and attempt to resolve them before escalating to maintenance for intervention., • Assess machine operation and provide suggestions for improvements to safety and efficiency where possible., • As required interface and input operations data into Metrc, Distru, or other systems used by Buds to capture shift performance., • Conform to machine specific LOTO requirements when performing services or specific cleaning activities that require LOTO., • Ensure the packaging operations are in compliance with all local and state laws, as well as the Company's operational standards Skills & Attributes • Superior verbal and written communication and presentation skills with proficiency of grammar and the ability to adapt tone/style to a variety of audiences, • Strong organizational, critical thinking, presentation, and project management skills, • Ability to classify and triage issues and take appropriate action to resolve issues in self-sufficient manner, • Exceptional interpersonal and relationship building skills, • Advanced math and reading comprehension, • Strong business acumen with exceptional attention to detail, high stress tolerance, and exemplary emotional intelligence, • Ability to provide clear, timely, and coordinated directives, catering communication styles to different levels of the workforce, • Understands and thrives in fast-paced, KPI-driven production environments, • Team player willing to assist in any function of packaging and labeling, • Ability to prioritize the business in all decision making Education & Experience • HS Diploma or 2+ years of related field experience, • 1+ years of experience in a leadership role, • 2+ years of production or manufacturing experience, preferably with 1+ years in cannabis industry, • Must have a solid understanding of the cannabis laws, rules and regulations and passion to further understanding and knowledge of the industry, regulations, market trends and competition, • Experience working with various machines or electrical systems, • Proven track record of managing the scope of operations in a complex and highly regulated business environment, • Cannabis product knowledge strongly preferred, • Working knowledge of Metrc Working Conditions/Physical Demands: • Able to stand or sit for extended periods of time., • Able to lift up to 50 pounds, • Able to work a fully flexible schedule including nights and weekends if necessary, • Must pass all required background checks, • Must have a reliable vehicle, • Must be and remain compliant with all legal or company regulations for working in the industry, • Must possess valid driver's license, • Must be a minimum of 21 years of age, • Must be approved by Cannabis Regulatory Commission to work in cannabis industry #ENGHP

Job Description Summary: Responsible for the execution, implementation and close supervision of the preventative maintenance system, to ensure preservation and upkeep of all buildings. Duties and Responsibilities include the following. Other duties may be assigned. • Regular inspection of buildings and grounds, notifying deficiencies of operating employees and service contractors, physical appearance of property, deferred maintenance and other related data to the Property Manager., • Trains, leads and becomes a resource to support staff to ensure staff is performing to expectation, informed of company policies, procedures, schedules all tasks are completed correctly, with attention detail and in a timely manner.*, • Supervises and assists subordinates in the cleaning of the community buildings, laundry rooms, office building, maintenance shop, storage areas, grounds, daily collection of debris on landscaped areas and continual sweeping of parking lot and dumpster areas.*, • Assists with the development and preparation and execution of property objectives, financials and goals including input for the preparation of the annual budget, business plan, rent increases, bid specifications and management of competitive bids and contract performance evaluation.*, • Accurate and timely completion of annual Unit Inspection and inventory of all project maintenance equipment and submittal to the Property Manager by December 1st of each year.*, • Responsible for timely initial response to HUD, HFA, state and local inspection reports. *, • Policing and inspection of buildings, pool, play area and overall grounds, as well as, noting any deficiencies of the physical appearance of the property and any other related data and reporting same to the Property Manager or Executive Property Manager.*, • Preparation and participation of emergency procedure manual and subsequent drills. Upon notification from the Property Manager or Executive Property Manager, be available for emergency duty (on call rotation), snow removal and in case of fire or any other emergencies as defined by management.*, • Observe, delegate, repair and ensure resolution of: light bulb replacement, sewer back-ups, smoke alarm operations, accompany contractors, cleanliness and presentation of vacant units, flooring upkeep; carpentry, plumbing, electrical, HVAC and appliance repairs; and necessary tile work.*, • Report and submit in a timely manner to the Property Manager or Executive Property Manager; lease infractions, completed daily task sheets, observation check list and related deficiencies in service, incident reports (within 24 hours for property, injuries and disturbances), work orders, as well as, applicable maintenance request forms. *, • Ensure employees are properly using designated safety equipment such as gloves, goggles, hard hat, ear protector and work books while operating any equipment., • Educates tenants on applicable rules and regulations of the property including; garbage disposal, appliances and heating/cooling systems, etc., • Adheres to all company policies and procedures., • Responsible for the security of the building(s) in regards to proper key control and continual observation and resolution of potential issues., • Follow and enforce safety rules such as our “No Smoking” policy in designated areas such as vacant and occupied unites, boiler rooms, storage areas and the management office., • Maintain discretion, confidentiality and provide customer service to all residents. Only address and communicate responses to your position level and responsibilities. Direct all residents to the Management Office for maintenance/repair requests., • Appear in court on behalf of the owner, ensuring our organization is presented in a professional, detailed and positive manner. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: High school diploma or general education degree (GED); and four to six years related experience and/or training; or equivalent combination of education and experience. Language Ability: Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence and procedure manuals. Ability to effectively present information and respond to questions from groups of manager, clients, customers and the general public. Math Ability: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry. Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Special Skills: Oral communication skills Multi-Tasking Professionalism Delegation Training Written communication skills Time management Technical communication Attention to detail Discretion Reading skills Mechanical aptitude Organization Diplomacy Customer Service Follow Up Computer Skills: Email, Internet and Microsoft Office Certificates and Licenses: Valid Driver's License Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to work in wet or humid conditions, work near moving parts, work in high precarious places, exposure to toxic or caustic chemicals and fumes or airborne particles, extreme heat (non-weather) and vibration. The employee is frequently exposed to outdoor weather condition and risk of electrical shock. The noise level in the work environment is usually loud. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must occasionally lift and/or move 75 pounds and frequently lift and/or move up to 40 pounds. Must occasionally lift/move heavier objects (Refrigerator, Stove, etc.) with assistance. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is regularly required to; use hands, stand; walk; reach with hands and arms and talk or hear; stoop, kneel or crouch. The employee is occasionally required to sit; climb or balance; taste or smell. Schedule is Full Time 40 hours per week and some opportunity for overtime. Schedule can vary slightly based on location but it approximately 8 am to 5 pm. There is a rotating on call schedule for evenings/after regular work hours and weekends. Full Time 40 Hours Per Week

Job Description • Regional Sales Manager, • Channel Manager / Distribution Expert, • Global Company - Manufacturer, • Valves – Process Equipment PHARMACEUTICAL, • Mechanical Engineering Components/ Fluid Dynamics, • World Class training and Professional Development, • $130,000 to $150,000 Basic salary (experience dependent), • Home Office, 401K, Medical, Laptop, Mobile Phone, Credit Card and Bonus, on target earnings of $200,000, • Northeast USA - Ideally based MA, NY, NJ, NH, • Home Based could live in Boston, New York, New Jersey, Philadelphia, Newark, Bangor, Portland, Connecticut, New Hampshire, Pennsylvania, Baltimore etc. What You Will Do: • Strategic development and tactical execution of new business generation., • Managing and developing your Channel partners working closely with OEM’s and Engineering Houses you will be involved in major new client acquisition in the pharmaceutical, biopharma, life science, cosmetics, personal care, and food and Beveridge markets, • Delivering focused sales and marketing campaigns designed to drive aggressive revenue growth in the above process industries., • Writing business proposals, customer forecasts and negotiating with stakeholders., • Identifying and mapping business strengths and customer needs., • Researching business opportunities and viable additional income streams., • Drafting and reviewing contracts., • Ideally with experience of selling technical products through distribution/channel partners to industrial end users and OEMs., • Knowledge of process industries and mechanical flow related components, • A strong strategic thinker with exceptional business development and account management skills., • Outstanding at getting in front of corporate customers, gaining buy in, and then selling across all relevant departments., • Able to develop new business opportunities, coupled with an eye for upselling/cross selling., • Proven track record of Managing Channel/ distribution partners, • You will be an excellent communicator and be able to connect and sell to a wide variety of functional decision makers. The best part of this is, if you are successful in getting the job, we guarantee that you are going to love it. Why? For every 100 people we recruit, 96% are still with their company 12-months later, and 94% are still there 2-years later. That speaks for itself. Want to be a part of this? Of course, you do! If you have the entrepreneurial spirit and passion this position requires then get in touch now before the deadline expires. To apply, click on the apply button below, contact Jonathan Sallis, or call the Mercury Hampton office directly on 0044 1925 937311. We aim to respond to all successful applicants within two working days.

Job Description Job Title: AutoCAD Drafter Classification: Salary, Full Time, Exempt Department: Engineering Location: Kearny, New Jersey Direct Supervisor: Engineering Manager Job Summary: The AutoCAD Drafter utilizes software to provide support to Engineering and Operations by preparing routine and detailed layouts for various disciplines including but not limited to mechanical, electrical, instrumentation, piping, and as-built drawings. They create Front End Engineering Drawings (FEED), support regulatory maintenance of drawings through routine reviews, and store drawings in the form of up-to-date drawing history within the company filing system, all while adhering to corporate technical standards. The AutoCAD Drafter has a solid understanding of drafting techniques, design layouts, and engineering terminology. Additionally, they possess mechanical aptitude and the ability to perform basic mathematical calculations. Supervisory Responsibilities: None Essential Responsibilities: • Create CAD drawings for engineering projects., • Generate and revise project drawings, layouts, and elevation plans., • Prepare final sketches of proposed drawings, ensuring accurate dimensions of parts, materials to be used, the relationship of one part to another, and how various parts fit into the overall structure or project., • Apply knowledge of process equipment, engineering practices, mathematics, building materials, and physical sciences to complete drawings., • Draft detailed multi-view drawings of processes, including isometric views., • Translate sketches into finished designs., • Maintain strong attention to detail to ensure drawings meet specifications accurately., • Update Drafting and Engineering standards as needed., • Proficiency in Autodesk, AutoCAD, and AutoCAD Plant 3D., • Proficiency in Revit is a plus., • Advanced 2D and 3D drafting skills, including the ability to create detailed technical drawings and complex models., • Strong experience with P&ID drafting and manufacturing-related fieldwork., • Strong analytical and visualization skills., • Proficiency in Microsoft Excel, Word, and Project., • Excellent communication skills., • Strong interpersonal skills., • Highly organized., • Demonstrated accuracy and attention to detail., • Ability to work effectively in a team environment., • Must be able to pass a 10-panel controlled substance testing and random testing after that., • Associate’s degree (A.A.) or equivalent from a two-year college or technical school., • Or an equivalent combination of education and experience., • Travel to company sites as needed for project work - fieldwork and drawing verification., • Standard working hours are consistent across all facilities, which may necessitate adjusted commute start times., • Must be able to stand throughout the workday., • Must be able to lift, push, and pull up to 40 lbs., • Must be able to work on elevated surfaces and open grated structures., • Must be able to pass a respirator fit test for the use of an SCBA. Kuehne is an Equal Opportunity Employer (M/F/Disabled/Veteran)

Job DescriptionBenefits: • 401(k), • Health insurance About Us Lightning Mechanical has been serving New Jersey and the greater Tri-State area since 2005. We specialize in commercial, industrial, and multi-tenant HVAC services, including repair, maintenance, installation, and in-house sheet metal fabrication. Our team is factory-trained on Daikin VRV and Applied systems, along with many other VRF manufacturers, giving us an edge in delivering dependable service and quality workmanship HVAC Contractor New Jersey_ Rep. As a growing contractor with a reputation for excellence, were looking to bring on the next generation of project management talent. Position Summary We are seeking a motivated Junior HVAC Project Manager to support the execution of commercial and industrial mechanical projects. This is an excellent opportunity for someone with 13 years of experience (or strong internship/assistant PM experience) who is eager to grow into a senior-level role. Youll work closely with senior project managers and company leadership, gaining hands-on exposure to scheduling, budgeting, procurement, and client relations. Responsibilities • Assist in managing HVAC projects from kickoff to closeout under the guidance of senior staff., • Track project schedules, budgets, and progress updates., • Support the preparation of submittals, RFIs, change orders, and project documentation., • Coordinate material and equipment deliveries., • Communicate with subcontractors, vendors, and internal teams to ensure timely execution., • Attend project meetings, document action items, and follow up with stakeholders., • Monitor site safety compliance and quality standards., • Gradually take ownership of smaller projects as skills and experience grow. Qualifications • 13 years of experience in HVAC, mechanical contracting, or construction project management., • Familiarity with HVAC systems, terminology, and construction practices., • Strong organizational, communication, and problem-solving skills., • Proficiency with Microsoft Office; exposure to project management software is a plus., • Bachelors degree in Mechanical Engineering, Construction Management, or related field (preferred but not required)., • Driven, detail-oriented, and eager to develop into a senior project manager. Compensation & Benefits • Competitive salary: $55,000 $70,000 per year., • Health, dental, and vision insurance options., • 401(k) retirement plan., • Paid time off and holidays., • Mentorship and career growth opportunities with a clear path to senior-level project management.

Job Description General Summary A well-established construction manager is seeking a Project Coordinator for Newport in Jersey City, NJ. The individual will assist with managing and coordinating construction-related projects for a mix of multi-family residential and retail properties. Specific Responsibilities: • Assist with managing all aspects of construction projects, • Review blueprints and drawings for all designated projects, including providing comments and take-offs, • Manage the construction administration process: properly name and send out submittals and RFI’s for review by consultants; manage the submittal and RFI tracker that all team members rely on, • Track and manage project scheduling, • Request estimates and manage the bid process, including assisting to write scopes of works and pricing sheets, • Follow construction guidelines and maintain project schedules and budgets, • Assist with the successful negotiation and pricing of construction materials, • Schedule and manage contract negotiations, • Follow established guidelines and procedures to increase communication and overall efficiencies, • Assist with managing subcontractor activities and vendor material ordering, • Participate in the planning phase of construction projects, • Manage the budgeting process for selected projects, • Responsible for meeting financial, budget and forecasting objectives as they relate to new and on-going projects, • Build and maintain relationships with consultants, and contractor contact and leads, • Prepare well-written reports and business correspondence, • Administrative duties to include: meeting minutes; team updates; permit tracking and expeditor coordination, • Additional duties as needed Qualifications • Bachelor’s college degree in a real estate-related field: i.e. mechanical engineering, civil engineering, systems engineering, architecture, etc., • 1–3 years of experience in construction project coordination or a similar role., • Background in general construction, engineering, or architecture preferred., • Ability to read and interpret architectural drawings and blueprints., • Willingness to work extended hours when needed to meet project deadlines. Skills • Strong organizational and multitasking abilities with exceptional attention to detail., • Proactive, adaptable, and solution-oriented approach to challenges., • Excellent written and verbal communication skills., • Strong collaboration and teamwork mindset., • Ability to manage multiple priorities in a fast-paced environment., • Proficiency in Microsoft Office Suite; familiarity with AutoCAD and BIM is a plus.

Job DescriptionDescription: About the Company: At Lincoln Electric Products Co. Inc., we specialize in the design, manufacture, and distribution of custom equipment tailored to meet the specific applications and requirements of our customers. Our product range includes: • Panelboards: Up to 2000A, • Service and Distribution Switchboards: Up to 8000A, • Generator Connection Boxes, • Generator Output Switchboards, • Single and Double-Ended Substations Lincoln Electric Products Co. Inc. seeks a highly motivated and results-oriented Electrical Engineering Manager is responsible for overseeing and managing the compliance, development, and implementation of engineering standards, specifically focusing on UL (Underwriters Laboratories) testing and manufacturer test requirements. This role involves ensuring that products meet all necessary safety, regulatory, and industry standards, particularly for electrical and mechanical systems. The manager will work closely with engineering teams, product development, and quality assurance to guide the organization in meeting UL standards and regulatory requirements, ensuring products are certified and safe for use in the market. It is a full-time, exempt position, and the candidate will report directly to the Director of Engineering. Working Conditions: Office Environment What We Offer: • Competitive Salary: Paid on a weekly basis., • Comprehensive Benefits Package, Including Health, Dental, and Vision Plans., • Retirement Plan: 401(k), • Paid Time Off (PTO): For vacation and personal days. · · Oversee the development and implementation of engineering related to UL and manufacturer test requirements (MTR) for electrical and mechanical products. · Ensure all products are compliant with UL standards (e.g., UL 508A, UL 60947) and other regulatory standards applicable to the industry. · Work closely with internal and external stakeholders to stay updated on UL changes, revisions, and new industry standards. · Lead efforts in coordinating product testing and certification with UL or other regulatory bodies to ensure compliance with industry standards. · Manage and track testing schedules and product submissions for UL approvals. · Act as the primary point of contact for testing agencies, ensuring efficient and accurate communication regarding testing and certification requirements. · Collaborate with engineering and product development teams to integrate UL and manufacturer test requirements into the product design phase. · Provide technical guidance and expertise to engineering teams to ensure designs meet all applicable UL standards. · Assist in troubleshooting and resolving issues that arise during testing or certification processes. · Conduct regular audits of product designs, processes, and manufacturing practices to ensure continuous compliance with UL and other regulatory requirements. · Prepare and manage internal and external inspections, ensuring that all products meet safety standards and regulatory guidelines. · Ensure that all documentation related to UL testing, compliance, and certifications is complete, accurate, and maintained for audit purposes. · Work closely with the Quality Assurance, R&D, and Manufacturing teams to ensure product quality and safety across all stages of the product lifecycle. · Educate and train engineering teams on UL MTR requirements and the importance of compliance in the product development process. · Collaborate with the legal and regulatory affairs departments to stay informed about industry regulations and compliance changes. · Monitor industry trends and emerging technologies to ensure the company’s products stay ahead of regulatory changes and market demands. · Identify opportunities to improve internal processes, enhance product safety, and streamline certification procedures. · Implement corrective and preventive actions when issues related to compliance, testing, or certification arise. Requirements: Skills, Requirements, and Specifications · • 10+ years of experience in Electrical engineering, focusing on switchboards, switchgear, or electrical equipment., • 4+ years in a leadership or managerial role, • 4+ years of experience in engineering standards management, UL testing, and product compliance, particularly in the electrical or mechanical industries., • Experience with product safety and regulatory certifications (e.g., UL 508A, UL 60947, IEC)., • Proven track record of working with testing agencies and managing certification processes., • In-depth knowledge of UL standards, testing procedures, and other industry standards such as IEC, ANSI, and NEC., • Strong understanding of electrical and mechanical system design principles and how they relate to safety standards., • Excellent project management, organizational, and documentation skills., • Strong communication and interpersonal skills, with the ability to collaborate with cross-functional teams and external agencies., • Ability to interpret complex technical documentation and standards and translate that into actionable requirements. Experience with CAD tools, product design, and development., • Knowledge of risk assessment techniques and compliance risk management., • Familiarity with ISO standards and other international regulatory requirements., • Experience with electrical product testing (e.g., electrical enclosures, switchgear) and mechanical safety standards., • Primarily office-based with occasional visits to manufacturing facilities and testing laboratories., • Involves regular interaction with engineering teams, product managers, external testing agencies, and regulatory bodies., • May require occasional travel for product testing, certification activities, and industry conferences. Education: • Bachelor or Masters Electrical Engineering Degree, • Professional Engineer (PE) certification is an advantage.

Job DescriptionSalary: Minimum - $70,000 annually Who We Are Binsky is a leader in world-class mechanical construction. Dedicated service to our clients has elevated us as the premier mechanical contractor for projects of all sizes and scopes. Innovation is the key at Binsky and along with our creative processes, we are always on the cutting edge of technology. Recognized as one of the most respected mechanical contractors in New Jersey and Pennsylvania, Binsky delivers high quality workmanship on projects from large traditional construction to commercial HVAC, plumbing, and service. Building incredible projects requires exceptional people. We are seeking an Project Engineer (onsite) for our Rahway, NJ jobsite. Why We Need You! We need talented individuals, like you, who care about the company and our customers, and can help us continue to grow and succeed! The Role The Project Engineer is responsible for key aspects of the project, related to setup, planning, progress and closeout. Accountabilities QA/QC Process • Review QA/QC requirements of the project and generate applicable submittals and procedures., • Lead install tracking utilizing the Stratus platform, provide updates on progress/weekly reports., • Take the lead on all required testing documentation, prepare/submit to the client. Labor Tracking • Prepare construction and manpower schedules. Assist Project Manager • Review revised contract documents and work with Project Manager to assist in cost proposals as required., • Review contract documents and extract pertinent information related to constructability., • Review contract requirements and complete essential project set-up reports and submittals., • Create and distribute Requests for Information (RFIs) required to proceed with the construction and design activities., • Review and generate engineer submittals for review by design team and owner. Field Inspection • Manage expediting chart and tracking key outstanding items and delivery dates. Information Flow • Create and update equipment logs and populate with necessary date and information., • Create key scopes of work for miscellaneous subcontracts and field purchased items. Qualifications: Skills • An understanding and broad knowledge of Plumbing, HVAC and Process systems for commercial and institutional construction, including hospitals, schools, R&D facilities and multi-story buildings is preferred., • Strong computer and technology skills including Microsoft Office, Bluebeam and Navisworks., • Ability to prioritize, set goals and manage multiple tasks under time constraints and meet strict deadlines, • Ability to read or learn to read architectural, structural and mechanical plan and be familiar with a variety of plumbing, HVAC and Process systems and terminology, • Demonstrate strong math aptitude, organization, verbal, written and analytical skills, • Knowledge of or ability to learn Plumbing and Mechanical theory and code to identify issues with the designs or conflicts with other trades Education and Experience • Bachelors Degree in Mechanical Engineering preferred., • Experience in commercial plumbing, process and HVAC projects preferred., • Must be comfortable working with clients, architects, engineers, subcontractors and vendors. Physical Requirements • Physical activity not limited to climbing, bending, kneeling, crawling, lifting<50 lbs, sitting and walking. What We Offer Binsky values the well-being of its employees and offers competitive wages and a range of benefits: • Medical, Dental and Vision benefits, • 401k with company contribution, • 8 paid holidays per year, • Paid Time Off Binsky is an EOE. This job description does not necessarily represent an exhaustive list of responsibilities, skills, duties, requirements, efforts or working conditions associated with the job. While this is intended to be an accurate reflection of the job, management reserves the right to revise the job or require that other different tasks are performed as circumstances change.

Job DescriptionCompany Description Stratas Foods LLC is the leading supplier of fats and oils to the Foodservice, Food Ingredients and Retail Private Label markets in North America and is a producer of quality bulk and packaged dressings, mayonnaise and sauces. Stratas Foods was formed in October 2008 as a 50/50 joint venture between ACH Food Companies (ACH) and Archer Daniels Midland (ADM). Manufacturing facilities are located in Dallas and Houston, TX; Decatur and Quincy, IL; Englewood and Hillside, NJ; Fresno, CA; Nashville, TN; and Valdosta, GA. Corporate offices are located in Memphis, TN. We are committed to maintaining a progressive workplace by utilizing the ideas, skills and talents of all of our employees. We strive to make Stratas Foods a great place to work and are building a team capable of meeting our business goals. Job Description The Plant Project Engineer I will provide engineering support and project leadership for the plant The expectation is that this role will spend approximately 60% of the time on project related activities and 40% of the time on plant support activities. At times either activity could exceed expectation. The Plant Project Engineer I role will include project implementation, production and equipment improvement initiatives and support the daily operations of the plant to ensure all safety and quality goals are achieved. Qualifications • Project management, project planning, project coordinator, purchasing, and supervision of contractors for various projects to assure completion on a timely basis within budget., • Adhere to and enforce Good Manufacturing Practices (GMP) and HACCP requirements., • Lead and assist management with appropriate training to assure regulatory compliance., • Report to the Director of Engineering with a dotted line to the Plant Manager., • Maintain appropriate communication/relationships with all employees, vendors, visitors., • Provide the necessary safety training to contractors and others as necessary., • Follow, monitor, and ensure compliance with all safety, food safety, environmental, GMP rules, regulations, and policies., • Attend daily production/quality meetings., • Provide technical support for plant processes and improvements., • Observe facility operations and assist with problem solving on a regular basis., • Excellent oral and written communication skills with proven ability working well with people., • Ability to identify critical areas for improvement and develop plans for correction., • Competent in making sketches, drawings, line layouts, plans etc., and written instructions as necessary to affect equipment maintenance / repair., • Participative team attitude skills with all personnel to assure production standards, safety, and sanitation levels are maintained as defined by the Mission Statement., • Good skills in ammonia refrigeration, steam generation and PLC’s., • Good problem solving skills through team and individual efforts. BS degree in engineering or technical related area from an accredited college/university; Chemical, Electrical, or Mechanical preferred Related Experience Proven Engineering experience of 3 – 5 years, project management is a plus Equipment/Software Skills Working knowledge in personal computers (Microsoft software necessary, Project management, Microsoft Project preferred) and basic understanding with Allen Bradley PLC. Knowledge of CMMS such as MP2 is a plus. Must have good working knowledge of general PC systems. Certifications, Licenses, Registrations None required, any maintenance related licenses would be a plus such as PE, ASME welding, PLC’s , wastewater, etc. Additional Information Physical: While performing the duties of this job, the employee is regularly required to walk, sit, and stand. The employee will also be required to use hands, arms and fingers. Must have the ability to lift 50 pounds. Ability to walk distances across facility, climb steps and ladders on occasions, sitting at office desk work, sometimes in cooler atmosphere ( 35-45 degrees) , sometimes in engine room ( + 95 degrees in hot months). Language Bi-lingual is preferred Sensory: Visual, speaking, and touch is essential. Mental/Reasoning: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form Salary: $122,000 to $153,000 Annual Bonus Incentive: 5% Benefits: Medical, Dental, Vision Stratas Foods is an equal opportunity employer and will not discriminate against any applicant or employee in any manner prohibited by law, including but not limited to, on the basis of race or color, religion, gender, age, genetic information, national origin/ancestry, mental or physical disability, family status/marital status, military/veteran status, and any other legally protected status. Pay Transparency Nondiscrimination Provision-The Employer will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the Employer’s legal duty to furnish information. 41 CFR 60-1.35(c) Stratas Foods Applicant Request for Accommodation Form: Stratas Foods California Privacy Rights Act Policy:

Job DescriptionJob Title: Wastewater Treatment Operator - N1 LicenseJob Description The N1 Licensed Wastewater Treatment Operator is responsible for the operation, monitoring, and maintenance of wastewater treatment systems to ensure compliance with all local, state, and federal regulations. This role requires technical expertise in plant processes, mechanical aptitude, and adherence to safety and environmental standards. Responsibilities • Operate and maintain wastewater treatment plant equipment, including pumps, valves, blowers, clarifiers, digesters, and chemical feed systems., • Monitor plant performance through gauges, meters, SCADA systems, and laboratory testing; record operational data and prepare reports., • Collect and analyze wastewater samples for chemical, physical, and biological characteristics; adjust processes to maintain compliance with NPDES permit requirements., • Perform preventive and corrective maintenance on mechanical and electrical systems; troubleshoot and repair equipment as needed., • Respond to alarms, system failures, and emergency situations promptly and effectively., • Maintain accurate logs, inspection records, and documentation for regulatory compliance., • Ensure safe handling and disposal of hazardous materials generated during treatment processes., • Assist in training junior operators and promote a culture of safety and continuous improvement., • Perform daily operations and maintenance of treatment plant., • Complete minor routine maintenance of equipment., • Operate facilities with computer or PLC controls., • Monitor, regulate, and adjust chlorinators, chemical feed pumps, and other process equipment., • Maintain a log of operations and maintenance activities and related records., • Possibly operate a variety of equipment such as forklift, aerial or scissor lifts, generator, compressors, pumps etc., • Participate actively in creating a safety culture at the jobsite.Essential Skills, • N1 Wastewater Operator License., • High school diploma or equivalent; technical training in wastewater operations preferred., • 1–3 years of experience in wastewater treatment operations or related field., • Knowledge of hydraulic, chemical, and biological principles of wastewater treatment., • Ability to read and interpret blueprints, schematics, and regulatory guidelines., • Strong mechanical skills for pump and equipment maintenance; basic electrical troubleshooting., • Proficiency in using SCADA systems and basic computer applications., • Valid driver’s license; ability to work rotating shifts, weekends, and respond to emergencies.Additional Skills & Qualifications, • Technical training in wastewater operations., • Experience in routine laboratory and field tests for control of plant operations., • Good interpersonal skills. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Hillside,NJ. Application Deadline This position is anticipated to close on Dec 30, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Overview Who we are— Transcat is a dynamic, innovative, growing company that has been recognized as the leading calibration and compliance services provider in North America and beyond. With over 1,000 employees—in technical, consulting, operational, sales, finance, and corporate roles—we have stood the test of time by delivering on our Trust in Every Measure promise to our customers in vital industries, including life sciences, aerospace, defense, energy, and utilities. We fulfill this promise through our employees, who live Our Values every day, the Transcat Way. Our employees are at the center of the rewarding, challenging, and life-changing work we do for our customers and those they serve. Are you ready to join a company where the work you do makes a difference, and where you can grow in your career? Here’s what Transcat has to offer— • Work that matters., • A values-based culture where people care about each other and the work they do together., • Flexibility., • Training and development to accelerate learning and career advancement. A CMMS Engineer, to support our clients with activities related to the use, operation, migration, or analysis of their Computerized Maintenance Management Systems (CMMS). This is a on-site position with occasional travel up to 25% of the time. You will report directly to our CMMS Service Lead. This is a project-centered role. In your first project, you will be responsible for- data migration and configuration of CMMS work instructions, workflows, asset hierarchy creation, and system integrations to ensure seamless implementation. You will also provide change management support to site teams, helping them drive system adoption and operational efficiency. Responsibilities Essential Duties and Responsibilities— • Project/ Migration, • Perform field walkdowns to verify the accuracy of the equipment data., • Carry out all technical data reviews and data entries in the system., • Translate and cleanse raw data in preparation for Data Migration., • Assist in the preparation of client project status reports and immediately communicate project deviations or delays to the Project Manager., • Meet regularly with all stakeholders to discuss progress, communicate changes, and support the entire change effort., • Assist with other continuous improvement and optimization projects, as required., • BI/ Optimization, • Extract and analyze data using business intelligence tools to aid business decisions., • CMMS Support, • Provide support to end-users in navigating and utilizing the CMMS., • Input and maintain asset and equipment data in the CMMS., • Track client requests and assist with metric and key performance indicators (KPI) reporting., • Other duties as assigned. Qualifications Required Knowledge, Skills and Abilities: • Preferred: Associate degree in a STEM field, or trade certification in instrumentation, mechanical, electrical, or related engineering field., • 1 -3 years’ experience in CMMS-related work (front end). Life Science experience preferred but not required., • Experience with either SAP or Hexagon., • Proficient in MS Office platforms, particularly MS Excel. BI Tool knowledge a distinct advantage., • Familiarity with data management processes (paper-based / digital change control processes)., • Ability to perform field verification / data collection for assets to be added to / changed on the CMMS., • Ability to complete projects on time that meet our quality standards., • Ability to quickly understand new software platforms., • Ability to build data for CMMS systems to the highest level of quality (averaging zero errors consistently)., • Able to travel up to 25% of the time. If this sounds like you, apply today! Equal Opportunity and Non-Discrimination Transcat is an equal-opportunity employer and prohibits discrimination based on any protected status. As required by United States law, all qualified applicants will receive consideration for employment without regard to age, color, disability, genetic predisposition or carrier status, national origin, race, religion, sex (including pregnancy, sexual orientation, and gender identity), status as a protected veteran, or as a member of any other protected group or activity under federal, state, and local law. We will make reasonable accommodations for employees with disabilities to enable them to perform the essential functions of their position unless doing so poses an undue hardship to the company or a direct threat to health or safety. Contingencies All offers of employment are contingent upon successfully completing all pre-employment requirements, which include verification of identity and employment eligibility, and when applicable, a motor vehicle driving record report. Salary Range $55,000 - $67,499 per year. #ZR

Are you a seasoned Project Manager with a background in HVAC, Plumbing or Sheet Metal? Our client, a leading mechanical contractor, is seeking a driven and detail-oriented professional to oversee commercial and industrial projects from pre-construction through close-out. To be considered for this Pr

Job Description About Us At Tate, we are passionate about everything we do. Tate has been recognized worldwide as an industry leader in the development and manufacture of data center infrastructure solutions, for over 50 years. We have expanded our manufacturing footprint across the US, Europe, Canada, and Australia and are excited to have opened a new 287,000 sq. ft. manufacturing site in St. Paul, Virginia. Tate, part of Kingspan’s Data and Flooring Division, is one of Kingspan’s five divisions operating in the Americas, EMEA, and APAC. Tate is one of the world’s largest raised access floor manufacturers delivering flooring solutions for some of the most prestigious buildings in the world. While also supporting the high-growth data center sector with cutting-edge infrastructure solutions that aim to improve the construction, operation and sustainability of Data Centers. About the Role The Project Manager is responsible for post-sales coordination, implementation, control, and completion of projects, while remaining aligned with strategy, commitments, and goals of the organization. What You’ll Do • Manage the installation of Tate products (e.g., Containment, Manifolds, Ceilings, Raised Floor systems) on construction sites across various regions., • Serve as the primary on-site liaison between Tate, contractors, and clients., • Coordinate with internal teams including engineering, logistics, and manufacturing to ensure timely delivery and installation., • Review construction drawings and specifications to ensure alignment with project scope., • Conduct site inspections and quality checks to ensure compliance with Tate standards and safety protocols., • Resolve field issues promptly and effectively, escalating when necessary., • Maintain accurate project documentation including schedules, reports, and change orders., • Support commissioning and handover processes for completed installations. Additional Expectation • Remain compliant with the Code of Conduct and Policies which includes the Kingspan Group Compliance Policy., • Ensure that all duties related to product compliance are adhered to in accordance with the Product Compliance Policy, Laws, Regulations, and market demands., • Responsible for all tasks to achieve compliance goals and demands of the Compliance Management System. Must raise concerns related to the Compliance Management System to their supervisor, manager, or any member of the Leadership Team, or through the confidential whistle blower service. What You’ll Bring • Bachelor’s degree in construction management, Engineering, or related field preferred; equivalent experience considered., • Ability to travel to job sites as needed. 30%-40% Travel Required, • 3+ years of experience in construction project management or site supervision., • Familiarity with raised access flooring systems, containment solutions, or similar infrastructure products., • Strong understanding of construction site safety, scheduling, and subcontractor coordination., • Ability to read and interpret architectural and mechanical drawings., • Excellent communication and problem-solving skills., • Proficiency in project management tools and Microsoft Office Suite. Employee Benefits • Career Scope and Advancement: As we grow, new positions and career opportunities arise, offering accelerated paths for the right candidates, locally and globally., • World of Wellness Philosophy: We empower you to take charge of your health and well-being. You’ll have access to a wide range of medical, dental, and vision benefits, along with personalized guidance from a “Health Advocate.” We also offer other supplemental options, including 401k, legal, disability, and theft insurance, to ensure your financial wellness., • Corporate Social Responsibility: Through Planet Passionate we are determined to reduce our manufacturing carbon (CO2e) emissions to as close to zero as technically possible, together with halving carbon intensity in our primary supply chain. We are very involved in our community, and you will have ample opportunities to support us, in creating a better world., • Skills Development: Given the dynamic pace of our business and a strong collaborative environment, your new role will be diverse and multifaceted – allowing you to be more versatile and develop a broader skill set., • Mentorship and development: At Tate, we don’t believe in hierarchy, we work together as one team for one common goal. You will have access and exposure to our senior leaders and experts for learning in your role, and additionally mentorship for the future., • Culture: We have a great team culture, highly collaborative, supportive and social. Together we innovate, collaborate, take ownership and strive for excellence. Tate is an equal opportunity employer. We welcome applicants from all backgrounds and do not discriminate based on race, religion, gender, sexual orientation, age, disability, or any other protected status. Come aboard as we champion diversity and inclusivity in the workplace! Stay connected with us on LinkedIn for insights into life at Tate. Join us in our mission to make a difference through exceptional solutions. #IND123 #ZR

A company is looking for a Mechanical Project Manager to manage mechanical design projects and ensure their successful and timely completion.

The company is a leading commercial mechanical contractor recognized for its full-service capabilities, responsive customer care, and expertise across a wide range of project types.Their portfolio includes commercial buildings, warehouses, data centers and telecommunications facilities, hospitals, c

Coordinate with clients, contractors, and team members to ensure project requirements are clearly defined and met.

Our client, a Leader in EPC Construction and Development Solutions for the Energy industry, is looking for a Field Quality Manager. Minimum of 10 years' experience in various aspects of design, surveillance monitoring, and Project Management, including electrical and substation, mechanical, and pipi

The Project Manager is responsible for effectively overseeing and managing the construction of one large and/or multiple smaller scale projects.Projects may be mechanical or multi-disciplined projects in accordance with the established construction budget to ensure customer satisfaction and manage t

Job DescriptionWho We Are At The Falcon Group, our mission is to deliver exceptional service across a broad range of industries, including multifamily, industrial, commercial, retail, hospitality, healthcare, and forensic/litigation support. Built on decades of experience, we provide a full spectrum of services, from architectural design to civil, structural, mechanical, electrical, and plumbing engineering, as well as construction administration and forensic assessments. This integrated approach allows us to deliver comprehensive, cost-conscious solutions to our clients’ most complex challenges. With a growing presence in key markets and multiple regional offices, we’re expanding rapidly and always looking for talented professionals to join our team. Guided by collaboration, innovation, and integrity, The Falcon Group provides the environment and support to help you thrive personally and professionally. The Role Job Summary We have an immediate opening for a Project Manager in our Jersey City, NJ office location. As a Project Manager you will be responsible for providing project support and conducting on-site inspections to ensure compliance with project plans, specifications, and industry standards. Your primary focus will be on delivering exceptional project outcomes while maintaining effective communication with internal teams, clients, and contractors. DUTIES & RESPONSIBILITES: Essential Functions for All Technical Positions • Coordinate and manage internal kick-off, milestone, and closeout meetings for projects, fostering effective communication and collaboration among team members and stakeholders., • Verify schedules and ensure adherence to project plans and timelines, both internally and with external resources, to meet project objectives efficiently., • Conduct on-site inspections, documenting existing conditions, performing field testing, photographing, and creating hand-sketches. Observes/ tracks work in progress to ensure compliance with project specifications., • Records accurate field measurements and performs calculations throughout the duration of the project., • Prepare written correspondence with clients and contractors, maintaining clear and professional communication throughout the project lifecycle., • Understand investigation reports and bid documents, including drawings and technical specifications, to ensure accurate interpretation and implementation., • Communicate project status and proactively address any issues or discrepancies that arise. Escalate unresolved issues to their direct supervisor in a timely manner., • Maintain organized records, files, drawings, and other essential project data ensuring that they are appropriately filed within the company’s systems for easy accessibility and future reference., • Collect post-project feedback to identify areas of improvement and communicates this feedback to their direct supervisor., • Keep up to date with job knowledge and industry trends through active participation in educational workshops, reviewing professional publications, and engaging in professional societies and networks., • Engage in networking activities and represent the company at events, seminars, continuing education presentations. Actively seek marketing opportunities to promote the organization’s presence in the industry. (Not limited to exclusive company events.) Technical • Demonstrates an understanding of Construction Plans, Specifications, and construction manuals., • Produces inspection field reports for clients, by thoroughly reviewing site observations, reporting findings and providing recommendations based upon professional judgement, while applying relevant codes and standards., • Review and evaluate change orders, assessing their impact on the project scope, schedule and budget, and providing recommendations to the team lead/ senior management., • Review payment applications, verifying the accuracy of work completed and materials supplied by contractors.Client Relations, • Participates in client meetings led by senior personnel, where active involvement is limited to taking meeting minutes, effectively communicating the meeting's agenda, and diligently following up with all stakeholders to ensure timely addressing of action items., • While working with senior staff, assist in planning, organizing, and running project meetings, effectively communication project objectives, deliverables, and action items to all stakeholders.Internal Team, • Works closely with the team to understand the scope of work, budget, goals, deliverables, and timelines to ensure project success. Please be aware that this job description does not encompass an exhaustive list of activities, duties, or responsibilities expected of the employee. The nature of the role may necessitate additional responsibilities, and/or activities, which can occur at any time, with or without prior notice. Supervisory Responsibilities: This position has no supervisory responsibilities. Qualifications: Education • Bachelor’s degree from a four-year college or university in Engineering, Architecture, Construction Management, or relevant work experience.Work Experience, • A minimum of two years of experience in an architectural and engineering consulting firm or construction industry.Licenses and Certifications, • For degree holders: Engineering/Architectural Intern or Engineering in Training Certification preferred., • OSHA-10 Certification preferred., • Valid United States Driver’s License required, as this position requires travel to and from client sites.Skills, • Proficient written and verbal communication abilities., • Attention to detail and accuracy in project documentation and deliverables., • Strong project management and organizational skills and ability to handle multiple projects concurrently., • Knowledge of building codes, regulations, and standards., • Professional and courteous interaction with clients and colleagues., • Ability to attend client meetings and events, as needed., • Flexibility to work overtime, as needed., • Familiarity with drafting software for positions that utilize the software (AutoCAD, BricsCAD, Revit) for positions that utilize the software., • Strong teamwork and collaboration skills, fostering a positive and productive work environment, along with the ability to work both independently and collaboratively with team members from various disciplines., • Ability to work in the field and to travel outside local areas as workload and projects when needed., • Efficient time management skills while adhering to project budgets.Estimated salary range for this position is $55,000 to $100,000. The salary listed is an estimate and not guaranteed. The salary offered will vary based on experience, education, skills, abilities, and certifications/license if applicable PHYSICAL DEMANDS: Lifting • Must be able to lift and carry items weighing up to 40 lbs.Height and Access Equipment, • Safe operation and use of ladders, scaffolds, and other access equipment as required., • Ability to work safely at heights.Outdoor Environment, • Exposure to prolonged periods outdoors, which might extend beyond 3 hours., • Ability to work in diverse weather conditions, including but not limited to:, • Temperatures above 85°ree;F or below 40°ree;F., • High humidity levels (above 90%)., • Adverse weather conditions like snow/ice, rain, and wind.Mobility, • Extended periods of standing and walking, possibly on uneven or challenging terrains.Flexibility in Scheduling, • Medical, Dental and Vision coverage, where we pay a portion of the premiums., • Supplement Insurance Options- Life, AD&D, Legal Plan, Pet Insurance, Critical Illness, Hospital Indemnity and Accident Plans., • Fully Company funded Short-Term & Long-Term Disability benefits., • 401K- A retirement program where we provide a match up to 3%., • We offer Paid Holidays, Paid sick time and Vacation days., • Employee Referral Program., • Employee Recognition Program., • Continuing Education Reimbursement., • Professional Licensing Assistance., • Jury Duty Leave., • Maternity/Paternity Leave., • Mobile Phone Reimbursement/ discounts., • Employee Assistance Program. Powered by JazzHR Gb1fSvJlDE

Job Description Who we are! Vanderweil Engineers is a nationally recognized, top-ranked engineering firm specializing in MEP/FP and technology services. For 75 years, we've delivered innovative solutions across diverse sectors—including Science & Technology, Mission Critical, Academic, Healthcare, and Commercial. As one of the largest independently owned engineering firms in the U.S., our team of 500+ professionals operates from nine offices nationwide, bringing deep expertise and a commitment to excellence to every project. We’re a 75-year-old company with a proud history of excellence and a future that’s just as bright. As we continue to grow and with a pipeline of exciting projects ahead, we’re seeking top-tier Senior Project Managers to help lead the way. If you want to be part of a thriving, fast-moving team, this is your moment. Some of your responsibilities include the following: • Project manager who has experience managing projects in the commercial, academic, and life sciences sector with a minimum of 12 years of experience., • Experience being the prime consultant and managing outside sub-consultants such as architects, structural, civil engineers, and owners., • Collaborate and coordinate with internal engineering departments, architects and contractors, • Experience writing proposals, estimating A/E fees, and presenting qualifications of teams., • Management of schedule and budgets for a multitude of projects, • Responsible for client communications, • Should have a knowledge of technical terms and be able to have a good rapport with outside partners, • Manages QC and deliverables as well as deadlines Essential Skills & Requirements: • Bachelor of Science degree in Engineering or Architecture, • Master’s & PE license preferred, • Commitment to sustainability, • Fluency in MS Office products including Word, Excel and Outlook and cloud tools. Strong communication and computer skills are required., • Working knowledge of BIM and Revit, • The preferred candidate will have excellent oral and written communication, interpersonal, problem solving and analytical skills, • Prior experience in project managing projects in an E or A or A/E consulting firm is necessary., • Business Acumen and business development Our Flexible & Hybrid Work Culture We know that work/life integration is important to our employees. Our hybrid work style (up to 2 days remote per week) allows team members to have flexibility while building their skills through in-person exposure to industry experts. Our wellness programs prioritize our team members’ physical and behavioral health. We are an equal opportunity employer committed to inclusion and diversity in the workplace. The compensation that we expect to pay for this position is commensurate with years of experience, professional licensure, geographic location, years of experience, and education, but our total rewards package should fall between $155,000 to $195,000.00 annually.

Job Description As a Portfolio Lead, you are accountable for excellent service, the smooth functioning of QE Solar projects, and meeting or exceeding the negotiated service-level requirements for every internal and external client engagement. Success will come from your excellent project management skills, familiarity with solar operations & maintenance, financial awareness, human resources and its various disciplines, and working knowledge about the industry each project takes place in. Great Portfolio leads are detail oriented, organized, customer focused, diligent, intellectually curious, adaptable, resilient, comfortable with logistical challenges and possess above-average technical writing and communication skills. Travel Requirements: As needed to meet service-level requirements and for required business meetings Essential Duties & Approximate Commitment of Time • Scheduling required calls and meetings; Performing all required project activities & compliance, assigning resources as necessary. Escalates concerns to ensure that projects stay on-track. Track and advise on progress against established project milestones. Track and advise on progress against established project budgets (time, resources, materials, overall costs, etc.). Portfolio Leads are frequently the primary client point of contact (POC) for all day-to-day activities and management of assigned projects in the portfolio. 25%, • Ensures consistency of outputs against the QE Solar standards and in accordance with client(s) requirements. Project assignments may include, but are not limited to: operational oversight, logistical management/coordination, site audits, communication, etc. 25%, • Management and oversight of assigned project portfolios and battery storage systems (BESS) including all preventative maintenance, troubleshooting, repairs and operations; Occasional project site visits as well as remote troubleshooting/analysis via smart software platforms. 20%, • Ensures project continuity in the event resources shift or are re-deployed during a project’s life- cycle. Works with Commercial Assets Manager, advisors, consultants, clients, and other QE Solar team members to evolve and continuously improve processes, practices, and services. Presentation and report development using technologies such as PowerPoint, Word, Excel, etc. 15%, • Moves projects/portfolios ahead through managerial courage, candor, and ability to ‘stand-alone; Ensures that deadlines and project requirements are met or exceeded; Provides daily oversight and direction to field staff; participates in staff hiring, performance management, co aching and training. 10%, • Knowledge creation, gathering, recording: Updates and maintains technology systems, records, operating processes, procedures, and guidelines; Other responsibilities as directed by upper management. 5% Position Requirements Education Required: • PMI certification a plus; Expertise in Excel, Google, MS Office, SmartSheet; Ability to read and understand electrical/mechanical diagrams, project design drawings and other architectural plans/construction documents; Proficient understanding of electrical measurement tools, performance testing procedures and product/software program interfaces; Ability to read and interpret PVSYST models and engineering/design data, • Inverter and/or BESS manufacturers’ certifications (e.g SunGrow, Power Electronics, Solectria, etc), Thermography certifications (Level 1) and IT/networking skills (MODBUS, TCP/IP, FIBER, SCADA, SEL), • NABCEP PV Installer Certification a plus, • Minimum OSHA 30 Certification and completion of NFPA 70E courses, • Renewable energy, especially solar and/or photovoltaic systems experience required; Engineering, Life Sciences, Utilities, Private Equity, Financial modeling and Consulting, • Physical Requirements: Ability to lift 25 pounds, • Ability to move safely over uneven terrain, • Ability to sit or drive for prolonged periods, • Ability to safely climb ladders while carrying 50 pounds, • Ability to work in extreme weather Job-specific Competencies: In addition to the specific work experience and skills, QE Solar also seeks someone with the qualities listed below: • Exceptional work ethic, with strong values and principles, • Able to work well independently and with minimal supervision, • Willingness to work irregular schedules to meet client/project deadlines, • Exceptionally strong communication skills, both written and verbal, interpersonal, and teamwork skills, • A firm commitment to client, team, and organization success, • Flexible and accommodating and able to go above and beyond the basic expectations when required, • High follow-up and organizational skills, • Detailed-oriented, with attention to detail for tasks that have zero tolerance for errors, • Curiosity, • 100% paid employee premium on health benefits; additional dependents at low costs and great plans for Health, Dental, Vision, FSA or HSA, • Wellbeing and Employee Assistance, • Perks at Work Marketplace for discounts on gym memberships, classes, tech, vacations, tickets, and more, • Family Building and Adoption Assistance Programs, • Learning & Development Opportunities Location : Springfield, NJ Employment Type: Full-time Location: United States Statement to all Third-Party Agencies and Similar Organizations: QE Solar accepts resumes only from contracted recruiting agencies with formal service agreements. Please do not send unsolicited resumes or outreach emails to our QE Solar employees, hiring managers, or team members without expressed consent or contract for services. QE Solar is not responsible for any fees or charges associated with unsolicited resumes or services.