Trabajos medical insurance verification en Edison, New JerseyCrear alertas

Job Title: Respiratory Therapist Reg Location: Main Hospital - New Brunswick Department Name: Respiratory Care Req #: 0000244232 Status: Hourly Shift: Night Pay Range: $46.07 - $56.23 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: A respiratory therapist is responsible for the care, evaluation and tests of the patients suffering from complications related to the breathing system. Respiratory therapists practice under the able guidance of expert physicians and should ensure that all respiratory care, starting from diagnosis to therapeutic treatment is properly carried out. Qualifications: Required: A NJ Respiratory License BLS certification RRT certification Preferred: 2-3 years of experience is preferable. ACLS, PALS and NRP is highly recommended. Essential Functions: • Administer aerosol medication, Chest PT and related therapies including medical gas therapy per physician orders or approved protocols. Perform rounds on all assigned patients to deliver appropriate care., • Assess and interpret patient status using Laboratory and Radiology results along with vital signs and other assessments to identify and provide appropriate care based on the specific needs identified. Evaluate therapy orders for completeness, appropriateness, quality and effectiveness using Evidence-Based Practice Guidelines. Recommend changes in the care plan based on assessments and guidelines., • Correctly complete all patient records and documentation according to Department policy including patient assessment, plan of care, E-MAR, patient education and performance improvement fields. Rarely leaves Overdue Tasks., • Demonstrate knowledge and skill in the use of Oxygen Therapy, BiPAP, CPAP and High Flow Nasal Cannulas (HFNC) for use in primary assignment area (i.e. neonate, infant, pediatric and adult) patient populations. Knowledge and skill includes device and interface selection, application, operational verification and modes of therapy. Assess effectiveness of therapy. Report any adverse reaction or side effects such as skin irritation., • Demonstrate Knowledge and skill in the use of invasive and non-invasive mechanical ventilation in primary assignment area (i.e. neonate, infant, pediatric and adult) patient populations. Knowledge and skill includes device and interface selection, application, operational verification, troubleshooting, and modes of therapy. Assess effectiveness of therapy three times per shift. Report any adverse reactions or side effects such as skin irritation., • Comply with all Department, Infection Prevention, and Safety policies and procedures. Demonstrate knowledge of National Patient Safety Goals and relevant Standards from Joint Commission, Department of Health, CMS and other regulatory bodies., • Determine priorities and organizes work and time to meet them. Demonstrate the ability to function in a diverse workforce. Interact tactfully, constructively and diplomatically with others., • Perform emergency airway care procedures and maintain patient ventilation during emergent situations. As ordered and if certified, establish, maintain and obtain samples from arterial lines. Perform arterial punctures to obtain arterial samples. Analyze arterial, capillary, and venous blood samples., • Complete all mandatory Competencies within specified timeframe. Complete all Healthstream online training within specified timeframe., • Attend external and internal educational programs as part of continuing education. At RWJBarnabas Health, our market-competitive Total Rewards package provides comprehensive benefits and resources to support our employees’ physical, emotional, social, and financial health. Paid Time Off (PTO) Medical and Prescription Drug Insurance Dental and Vision Insurance Retirement Plans Short & Long Term Disability Life & Accidental Death Insurance Tuition Reimbursement Health Care/Dependent Care Flexible Spending Accounts Wellness Programs Voluntary Benefits (e.g., Pet Insurance) Discounts Through our Partners such as NJ Devils, NJ PAC, Verizon, and more! Choosing RWJBarnabas Health RWJBarnabas Health is the premier health care destination providing patient-centered, high-quality academic medicine in a compassionate and equitable manner, while delivering a best-in-class work experience to every member of the team. We honor and appreciate the privilege of creating and sustaining healthier communities, one person and one community at a time. As the leading academic health system in New Jersey, we advance innovative strategies in high-quality patient care, education, and research to address both the clinical and social determinants of health. RWJBarnabas Health aims to truly make a unique impact in local communities throughout New Jersey. From vastly improving the health of local residents to creating educational and career opportunities, this combination greatly benefits the state. We understand the growing and evolving needs of residents in New Jersey—whether that be enhancing the coordination for treating complex health conditions or improving community health through local programs and education. Equal Opportunity Employer

Job Description Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customer’s products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along the distribution process. Hours/Shift: • 1st Shift from 6:00am – 2:30pm, • 2nd Shift from 2:30pm – 11:00pm HOW YOU WILL CONTRIBUTE (Overview & Key Responsibilities): As an Industrial Refrigeration Mechanic, you will be responsible for conducting maintenance, setup, troubleshooting, repairs, preventive maintenance, and operation of industrial freezers/refrigerators and related production equipment used in a manufacturing environment. • Provides emergency/unscheduled repairs of industrial freezers/refrigerators and related production equipment during production and performs scheduled maintenance repairs during machine service., • Monitor industrial freezer/refrigerators performance and identify potential issues before equipment failures occur., • Prepares industrial freezers/refrigerators, machinery, and related production equipment for scheduled production runs., • Diagnose malfunctions and perform necessary repairs or replace defective parts., • Performs mechanic skills including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of packaging and production machines., • Reads and interprets equipment manuals and work orders to perform required maintenance and service., • Perform daily routine preventive maintenance and maintain accurate daily repair logs., • Track inventory machinery/equipment with their respective spare parts., • Comply with OSHA safety and health rules., • Training: May be requested to provide training to future machine operators in their perspective roles., • Any additional duties as needed WHAT YOU NEED TO SUCCEED (Qualifications): • High school diploma or GED required; technical school, vocational training, or equivalent industrial maintenance or refrigeration experience preferred., • Bilingual in English & Spanish, strongly preferred, • 3-5 years’ of experience in an industrial maintenance mechanic role, preferably supporting industrial freezers, refrigeration systems, or related equipment in a manufacturing, packaging, or cold storage environment., • Knowledge with the following: Accepted practices and processes in the maintenance trades; electric motors, relays, PLCs, electro-mechanical equipment and systems found in machinery, including industrial freezer and refrigeration systems; servicing and maintenance of industrial equipment, including simple power, heating and cooling units., • Read and work from sketches, drawings and blueprints; understand occupational hazards and safety precautions of the machinery., • Ability to read and understand product specifications., • Forklift experience preferred, • Ability to lift up to 35 lbs. multiple times a day, • Ability to perform basic mathematical operations. Ability to bend, reach, kneel, and stand for extended period of time. WHAT WILL SET YOU APART (Competencies): • Good multitasking and prioritization skills., • Mechanically inclined., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Ability to work in a team environment., • Good time management skills., • Good analytical and problem-solving skills. WHY JOIN US: At Cryopak, we strive to offer a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Voluntary Accident, Critical Illness, and Hospital Indemnity Insurance, • Voluntary Life and AD&D, • Short-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description Our practice, Oral Surgery Group, is seeking an enthusiastic and experienced Surgical Dental Assistant to join our team! This is a unique and exciting opportunity for individuals passionate about Oral Surgery and committed to delivering outstanding care. As an Surgical Dental Assistant, you will play a crucial role in providing exceptional patient care and supporting our Oral Surgeons with various surgical procedures. This is a unique and exciting opportunity for individuals passionate about oral surgery and committed to delivering outstanding dental services. What You'll Do: The Surgical Dental Assistant will play a crucial role in providing exceptional patient care and supporting our Oral Surgeons throughout various surgical procedures. The successful candidate will be able to: Preparing the Treatment Room: -Ensure the treatment room is clean, organized, and equipped with the necessary instruments and supplies -Sterilize and maintain surgical instruments according to infection control guidelines -Set up equipment such as suction devices, dental chairs, X-ray machines, and surgical lights Assisting with Oral Surgery Procedures: -Prepare patients for Oral Surgery, explaining the procedure and addressing any concerns they may have -Assist Oral Surgeons during surgical procedures, anticipating their needs and providing the necessary instruments and materials -Maintain a sterile environment during surgery, following strict infection control protocols -Monitor patients' vital signs and comfort level during surgery, ensuring their well-being at all times -Handle and dispose of surgical waste and hazardous materials in compliance with safety regulations Patient Support and Education: -Provide post-operative care instructions to patients, including oral hygiene practices, medication administration, and dietary restrictions - Answer patients’ questions and concerns, offering reassurance and empathy throughout their treatment process -Educate patients about oral health, prevention methods, and the importance of regular dental visits -Maintain accurate and detailed patient records, documenting treatment plans, procedures, and progress Administrative Duties: -Schedule patient appointments and coordinate with other dental staff to ensure smooth patient flow -Manage patient records, update medical histories, and handle billing and insurance documentation -Assist with inventory management, ordering dental supplies, and maintaining equipment -Perform any and all other duties as assigned What You’ll Bring: -High school diploma or equivalent required -Valid X-ray license is required -Previous experience as a dental assistant, particularly in Oral Surgery, is highly desirable -Discharge experience is highly preferred -Knowledge of oral surgery procedures, instruments, and materials -Familiarity with infection control protocols and safety measures -Ability to work in a fast-paced environment and handle multiple tasks simultaneously. -Excellent interpersonal and communication skills, with a compassionate and patient-centered approach -Strong organizational skills and attention to detail -Proficiency in dental software and computer literacy Perks of the Job: -Highly competitive salaries & annual performance and compensation reviews -Competitive health insurance and benefits, including medical, dental, vision, disability, and more -401k retirement savings plan that includes employer match -Generous Paid Time Off, sick leave, and paid holidays -Advance your career growth with opportunities in the most extensive growing oral surgery practice in the Northeast About MAX Surgical Specialty Management: Established in September 2022 as the Northeast region’s first oral and maxillofacial surgery-only specialty platform, MAX Surgical Specialty Management is a surgeon-led management services organization developed with clinical and surgeon autonomy at its core. Today, MAX supports surgeons across New Jersey, New York, Pennsylvania, Vermont and Connecticut, enabling practices to channel resources, skills and knowledge within the oral surgery specialty, leading industry advancements and delivering the highest standard of patient care. Surgeons have access to a curated network that allows them to collaborate with and work alongside a diverse pool of highly skilled peers who are leaders in their specialty. MAX safeguards surgeons’ independence while offering robust support systems, access to advanced technology and opportunities for financial growth. Integrity-driven. Patient-focused. Experience the difference at www.max-ssm.com. MAX Surgical Specialty Management is an equal opportunity employer committed to providing fair employment opportunities regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, marital status, veteran status, or any other legally protected characteristic. We welcome diversity and encourage applicants from all backgrounds. Our inclusive environment values and empowers every employee to contribute to our mission. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Client Overview A well-established manufacturing organization specializing in the design, development, and production of highly engineered products for regulated industries. The company offers a collaborative, hands-on environment where technical leaders have significant influence on product innovation, operational excellence, and team development. Our client is seeking an Engineering Manager - Manufacturing to lead a multidisciplinary engineering team focused on the design, development, qualification, and support of advanced power conversion products.\n \n Salary/Hourly Rate $160k - $200k\n \n Position Overview The Engineering Manager - Manufacturing will lead a multidisciplinary engineering team focused on the design, development, qualification, and support of advanced power conversion products. This role combines technical leadership with people management and will oversee both new product development and sustaining engineering activities.\n \n \nThe ideal candidate is a highly technical electrical engineering professional with deep power electronics expertise, strong leadership skills, and the ability to drive execution in a fast-paced, hands-on environment.\n \n Responsibilities Of The Engineering Manager - Manufacturing \n\n • Lead, mentor, and develop a team of electrical and mechanical engineers.\n, • Manage engineering priorities, resource allocation, and project execution to meet business objectives.\n, • Serve as the senior technical authority for product design, system architecture, and engineering decisions.\n, • Oversee the development of new products from concept through qualification and production release.\n, • Drive engineering performance, throughput, and continuous process improvement initiatives.\n, • Lead root cause analysis and corrective action activities related to design, testing, and field performance.\n, • Approve design documentation, engineering changes, test plans, qualification reports, and technical analyses.\n, • Coordinate cross-functionally with manufacturing, quality, operations, and supply chain teams.\n, • Support customer-facing technical discussions, design reviews, and proposal development activities.\n, • Manage sustaining engineering efforts including field support, product improvements, and component obsolescence.\n, • Establish and improve engineering processes, standards, and best practices.\n, • Manage select engineering projects and initiatives from planning through completion. \nRequired Experience/Skills For The Engineering Manager - Manufacturing \n\n • Minimum 10 years of electrical engineering and product development experience.\n, • Authorised to work in the United States (citizen or green card holder).\n, • Strong background in power electronics, power conversion systems, or switching power converter design.\n, • Minimum 3 years of technical leadership or engineering management experience.\n, • Proven experience leading and developing engineering teams.\n, • Experience with systems engineering, requirements management, verification planning, and product qualification.\n, • Ability to balance technical leadership with project and people management responsibilities.\n, • Experience conducting root cause analysis, failure investigations, and corrective actions.\n, • Strong project prioritisation, organisational, and decision-making skills.\n, • Excellent communication and customer-facing presentation skills.\n, • Ability to travel up to 10% as needed. \nPreferred Experience/Skills For The Engineering Manager - Manufacturing \n\n • Master's degree in Electrical Engineering or Power Electronics.\n, • Aerospace, defense, electronics, or other highly regulated manufacturing experience.\n, • Experience with APQP or other structured product development methodologies.\n, • Experience supporting products through qualification and production release.\n, • Familiarity with environmental, electromagnetic compatibility, and reliability testing standards.\n, • Experience with FMEA, FMECA, fault tree analysis, and other reliability engineering tools.\n, • Experience using ECAD tools such as PADS or similar schematic design software.\n, • Experience authoring technical proposals, compliance documentation, and customer-facing technical deliverables. \nEducation Requirements \n\n • Bachelor’s Degree in Electrical Engineering required.\n, • Master’s Degree in Electrical Engineering, Power Electronics, or a related discipline preferred. \nBenefits \n\n • Medical, Dental, and Vision Insurance\n, • Life Insurance\n, • 401(k) Plan\n, • Paid Time Off\n, • Paid Holidays\n, • Sick Time\n, • Relocation assistance available for qualified candidates\n, • Career advancement opportunities within a growing engineering organization \n

Job Title: Reauthorization Representative Pay Rate: $22–$28/hr (W2) Job Type: Temporary (Possible Extension) Location: Edison, NJ 08837 (Onsite) About the Role: We are seeking a detail-oriented and organized Reauthorization Representative to join our team in Edison, NJ 08837. In this role, you will be responsible for obtaining authorizations for continued patient care and acting as a key liaison between insurance providers, physicians, internal departments, and patients. This is a vital position that requires strong communication skills, excellent follow-through, and a customer-first mindset. Key Responsibilities: • Communicate authorization status to internal teams, physicians, and patients., • Prepare Financial Obligation Notifications (FOBs) and update them as needed., • Update systems with changes to insurance plans or benefits; collect co-insurance payments., • Process rejections from Part D payers and investigate reimbursement issues., • Collaborate with Accounts Receivable to resolve payment or insurance claim concerns., • Perform insurance verification and general intake functions., • Answer and route phone calls professionally., • Greet and direct visitors, ensuring a welcoming office environment., • Maintain office equipment and supply inventory., • Support department managers with administrative functions and project coordination., • Assist with record-keeping and medical documentation as needed. Qualifications: • High school diploma or GED required., • 1–2 years of experience in authorizations, intake, and eligibility., • Previous experience in home health, home infusion, or a related medical field is strongly preferred., • Excellent organizational and communication skills., • Comfortable interacting with insurance companies, healthcare professionals, and patients. EQUAL EMPLOYMENT OPPORTUNITY STATEMENT: Suna Solutions provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. Applicants, with criminal histories, are considered in a manner that is consistent with local, state, and federal laws. REQUESTING AN ACCOMODATION Suna Solutions is committed to providing equal employment opportunities for persons with disabilities or religious observances, including reasonable accommodation when needed. If you are hired by Suna Solutions and require accommodation to perform the essential functions of your role, you will be asked to participate in our reasonable accommodation process. Accommodations made to facilitate the recruiting process are not a guarantee of future or continued accommodations once hired. If you would like to be considered for employment opportunities with Suna Solutions and have accommodation needs for a disability or religious observance, please call us at 1 (888) 223-4788, send us an email or speak with your recruiter. PAY TRANSPARENCY POLICY STATEMENT Compensation for roles at Suna Solutions varies depending on a wide array of factors including but not limited to the specific client, office or remote location, role, skill set and level of experience. As required by local law, Suna Solutions provides a reasonable pay scale to include the hourly or salary range that Suna Solutions reasonably expects to pay for roles that may be hired in California, Colorado, New York City or Washington as set forth below.

Engineering Manager, Product Development Relocation candidates are considered EVONA is partnering with a manufacturer of RF and microwave amplifiers, modules, and integrated radio systems used in defense, aerospace, unmanned vehicles, and space applications. Lead a small engineering team developing new RF hardware products. You will coordinate technical delivery, remove roadblocks, develop team members, and guide products from requirements through verification and production planning. The role is focused on leadership and technical guidance, with little to no hands-on bench work expected. Reports to: Director of Engineering. No travel expected. What you will do • Lead approximately four to five engineers and technicians focused on new product development., • Plan and assign work, manage priorities and schedules, and identify risks to delivery., • Coordinate RF amplifier and RF module projects from requirements and design reviews through verification and production handoff., • Review technical data and help engineers evaluate design and troubleshooting options., • Partner with Sales and Applications Engineering on requirements, statements of work, and development proposals., • Coordinate preliminary and critical design reviews, engineering documentation, and contractor specifications., • Work with test, quality, assembly, production, and Program Management to resolve issues and communicate progress., • Mentor team members, set performance expectations, and support hiring and onboarding. Required experience and skills • Approximately seven to eight years of relevant RF hardware experience at circuit, module, or product level., • Experience in hardware product development and a production environment, with an understanding of end-to-end delivery., • Demonstrated leadership through team management, work coordination, or mentoring engineers; a formal manager title is not essential., • Technical judgment to review RF engineering work and help the team identify solutions., • Strong communication, organization, prioritization, and stakeholder-management skills., • Bachelor’s degree in Electrical Engineering or a related field., • Ability to work onsite in East Brunswick five days per week., • Must meet U.S. Person requirements under ITAR due to access to export-controlled technical data. Preferred experience • Direct RF power-amplifier experience; related radio or RF hardware backgrounds will also be considered., • Previous RF hardware design experience., • Experience managing a similar small engineering team and delivering RF assemblies for government customers or prime contractors., • CAD familiarity for reviewing engineering work; master’s degree in a related field. Why consider this opportunity Own delivery of new RF products and lead a team of approximately four to five engineers and technicians. This is a management-focused opportunity for an established manager or an RF technical lead ready to take the next step. Relocation candidates will be considered. Benefits Paid time off including company holidays, vacation, and personal/sick time. Medical, vision, dental, and life insurance options for employees and dependents; employee assistance program and $4,000 Health Reimbursement Arrangement. 401(k) with company match.

Overview The Product Engineer I supports the design, launch, and ongoing improvement of new and existing products in a manufacturing environment. This role manages engineering changes, contributes to early-stage product development to ensure manufacturability, creates and reviews assembly and specification drawings, maintains product data and bills of material, and determines the parts and tooling needed to meet production goals. Working closely with manufacturing teams, customers, vendors, and suppliers, the Product Engineer I troubleshoots production issues, supports equipment and process qualification and validation, develops customized solutions, identifies cost-saving and reliability improvements, and delivers projects on time and within budget. Essential Functions • Manage engineering changes for new and existing products; communicate changes to all levels of manufacturing teams as well as suppliers accordingly, • Ensure the manufacturability of new and existing products by participating in the product design and stage gate development process in the early stages of product development, • Identify and implement programs to improve the manufacturability and reliability of products, • Support production lines to minimize or eliminate downtime, • Provide support for the maintenance of items and Bills of Material (BOM) in MRP system., • Create and review assembly drawings for existing and new products, • Determine parts and tools needed in order to achieve manufacturing goals according to product specifications, • Prepare and maintain parts guide for your product line to provide technical support for customers, sales, customer service and Humanscale field technicians for new and existing products, • Identify opportunities for cost reductions and coordinate initiatives to achieve savings in a timely manner, • Plan and accomplish projects & goals on time and within budget, • Support the installation, qualification, verification, and validation of new and existing equipment and processes, • Coordinate with vendors and suppliers regarding technical specifications and alternatives, including the procurement of material and components, • Generate specification control drawings as a means of communication with vendors and suppliers, • Resolve technical, procedural and logistical problems in manufacturing by using proper troubleshooting and failure analysis techniques, • Design customized prototypes and final functional units to satisfy customer Special Order Requests (SOR), • Any other duties as assigned Qualifications • Bachelor's or Master's degree in Mechanical Engineering or similar discipline, • 0 to 2 years of engineering experience, including relevant internships, co-ops, or hands-on academic product development projects., • Internship experience working in an Engineering capacity at a manufacturing facility, • Knowledge of engineering principles, practices and techniques commonly employed in the design and production of products, • Excellent organizational, analytical, and interpersonal skills, • Excellent verbal and written communication skills with the ability to communicate engineering concepts to non-engineers, • Understanding of Lean Manufacturing concepts, techniques and tools, • Understanding of and experience working with machines & mechanical systems, • Must be able to work in a team environment, helping others when necessary, • Bilingual in Spanish and English preferred PHYSICAL REQUIREMENTS • Ability to exert up to 10 pounds of force occasionally and/or a negligible amount of force frequently or constantly to lift, carry, push, pull or otherwise move objects, • Must be able to do repetitive bending and stretching, • Ability to lift 60 pounds, • Ability to be onsite 5 days a week, • Ability to move about the Production floor frequently and occasionally stoop, kneel, or crouch, • Ability to use hands to operate tools, install, adjust and attach parts, • Visual acuity for tasks that require attention to detail, such as operating machinery or performing quality control COMPUTER SKILLS • Good understanding of GD&T for assembly and part drawings, • Experience in using 3D CAD modeling software (i.e., Solidworks), • Experience with MRP systems such as INFOR is preferred, • Strong MSOffice and other computer skills Benefits • Competitive salary, • Medical Benefits (Medical, Dental, Vision), • HSA, FSA, Commuter Benefits, • Medical Discounts, • Ancillary Benefits, • Accident, Critical Illness, Hospital Insurance, • Voluntary, Spouse, and Child Life Insurance, • Pet Insurance, • Employee Discount Programs, • 401k matching, • Paid time off (including 15 PTO days and 11 holidays) Company Overview Humanscale is the premier designer and manufacturer of ergonomic products that improve health and comfort at work. We have a focus on sustainability with over 70% of our products currently certified as having a Net Positive impact on the environment. Our award-winning office products – seating, sit/stand desks, technology support and lighting – have led the industry in performance and simplicity for over 40 years. Salary Range: $71,434 - $104,194 Please note that the salary information is a general guideline. Humanscale considers other factors such as (but not limited to) scope and responsibilities of the position, candidate’s work experience, education/training, key skills, internal peer equity, as well as market location and business considerations when extending an offer. Humanscale is an Equal Opportunity Employer (Disabled/Veteran) Scam Notice: Please be aware that there are individuals and organizations that may attempt to scam job seekers by offering fraudulent employment opportunities in the name of Humanscale. These scams may involve fake job postings, unsolicited emails, or messages claiming to be from our recruiters or hiring managers. Humanscale will never ask for any personal account information, such credit card details or bank account numbers, during the recruitment process.

Job Description Job Description The Manufacturing Technician on the PM shift performs testing, troubleshooting, and validation of complex electromechanical manufacturing equipment and subsystems used in advanced semiconductor and AI-related applications. This role focuses on executing pre-test checks, acceptance testing, and final system verification prior to customer release, while working closely with Engineering, R&D, and Assembly teams to resolve technical issues and improve testing processes. The position offers hands-on exposure to sophisticated vacuum, cryogenic, high-power, and electromechanical systems, with significant technical training and a clear contract-to-hire path. Responsibilities • Perform testing, troubleshooting, and validation of complex electromechanical manufacturing equipment and subsystems to ensure they meet performance and quality standards., • Execute pre-test checks, acceptance tests, and final system verification prior to customer release, following established procedures and work instructions., • Troubleshoot equipment failures, identify root causes, and support corrective actions in partnership with Manufacturing Engineering, R&D, and Assembly teams., • Install, remove, and configure components within test systems using hand tools and mechanical assemblies, ensuring proper fit, function, and safety., • Operate proprietary testing software and computerized test systems to support manufacturing operations and equipment validation., • Read and interpret engineering drawings, blueprints, bills of material (BOMs), schematics, and detailed work instructions to guide assembly, testing, and troubleshooting activities., • Analyze test data, document results, and maintain accurate manufacturing test records in accordance with internal procedures and quality requirements., • Utilize precision measurement and troubleshooting tools, including calipers, multimeters, and related inspection equipment, to verify equipment performance and diagnose issues., • Support testing and operation of vacuum, power supply, pump, and electromechanical systems used in advanced semiconductor manufacturing equipment., • Participate in cross-training across multiple manufacturing and test stations to build versatility and support production needs., • Collaborate directly with Manufacturing Engineering, R&D, and Assembly teams to resolve technical issues, share findings, and improve testing processes., • Support continuous improvement efforts by identifying recurring issues, recommending process improvements, and assisting in corrective action implementation., • Contribute to statistical data analysis activities related to equipment performance and test results when applicable., • Work on equipment, machinery, and test systems rather than solely on finished products, ensuring systems are properly configured and ready for production use. Essential Skills • At least 2 years of hands-on experience as a manufacturing, test, equipment, electromechanical, or maintenance technician working directly on equipment, machinery, or test systems., • Demonstrated experience testing and troubleshooting equipment, not just operating machinery, including identifying problems and verifying corrective actions., • Strong mechanical aptitude and comfort working on complex electromechanical systems and assemblies.Job Type & Location This is a Contract to Hire position based out of Somerset, NJ. Pay and Benefits The pay range for this position is $27.00 - $29.00/hr. Individual compensation offered for this position within this range will depend on many factors, including qualifications, skills, relevant experience, job knowledge, geographic location, internal equity, and other pertinent job-related factors. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: Medical, dental & vision Critical Illness, Accident, and Hospital 401(k) Retirement Plan Pre-tax and Roth post-tax contributions available Life Insurance (Voluntary Life & AD&D for the employee and dependents) Short and long-term disability Health Spending Account (HSA) Transportation benefits Employee Assistance Program Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Somerset,NJ. Application Deadline This position is anticipated to close on Oct 15, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 20,000 consultants and 5,000 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. We are proud to be an Engineering News-Record (ENR) Top 500 Design Firm for our engineering design services and a ClearlyRated Best of Staffing® winner for both client and talent service. The company is an equal opportunity employer and will consider all applications withoutregard to race, sex, age, color, religion, national origin, veteran status, disability,sexual orientation, gender identity, genetic information or any characteristic protectedby law. If you would like to request a reasonable accommodation, such as the modification oradjustment of the job application process or interviewing process due to a disability,please email actalentaccommodation@actalentservices.com for other accommodation options. San Francisco Fair Chance Ordinance:Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in thecity and county of San Francisco, we will consider for employment qualified applicantswith arrest and conviction records. Massachusetts Lie Detector:It is unlawful in Massachusetts to require or administer a lie detector test as acondition of employment or continued employment. An employer who violates this lawshall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI):We may use Artificial Intelligence (AI) to support parts of our hiring process,including sourcing, screening, and evaluating candidates. AI helps assess applicationsand qualifications, but final decisions are made by our hiring team. By applying, youacknowledge and agree that your application may be reviewed using AI tools.

Client Overview Our client is a growing multi-location specialty healthcare practice focused on interventional pain management. They are committed to providing exceptional patient-centered care in a fast-paced outpatient setting while maintaining the highest standards of service and clinical excellence. They are currently looking to add a Traveling Medical Assistant/Front Desk to their team. Salary/Hourly Rate $20/hr - $25/hr DOE Position Overview Our client is seeking a compassionate, dependable, and patient-focused Traveling Medical Assistant/Front Desk to support a busy interventional pain management practice. This role combines both clinical and administrative responsibilities, helping to ensure efficient patient flow, accurate documentation, and an outstanding patient experience. Team members are cross-trained and may assist with front desk operations as needed. Travel between multiple practice locations is required, with mileage and toll reimbursement provided for travel to satellite offices. Responsibilities Of The Traveling Medical Assistant/Front Desk • Clinical Support:, • Room patients, obtain vital signs, and update medical histories in the EMR., • Assist providers during exams and in-office procedures., • Prepare, clean, and stock exam rooms between patient visits., • Monitor patient comfort and safety throughout appointments., • Accurately document procedures, vitals, and visit information., • Patient Care & Communication:, • Welcome patients in a professional and friendly manner., • Prepare patients for procedures and explain treatment processes., • Provide discharge instructions and review follow-up care plans., • Conduct post-procedure follow-up calls., • Front Desk & Administrative Duties:, • Manage new patient intake and registration., • Schedule appointments and coordinate procedures., • Handle walk-in patients and incoming inquiries., • Complete insurance verification and required documentation., • Maintain accurate patient records within the EMR system., • Perform patient follow-up communications as needed., • Support reception and front desk operations., • Compliance & Inventory:, • Maintain compliance with HIPAA, OSHA, and infection control protocols., • Ensure documentation meets regulatory requirements., • Monitor inventory levels and notify leadership when supplies need replenishment. Required Experience/Skills For The Traveling Medical Assistant/Front Desk • Prior experience as a Medical Assistant in a clinical setting., • Strong communication, organizational, and multitasking skills., • Ability and willingness to travel between multiple practice locations., • Comfortable working in a fast-paced healthcare environment. Preferred Experience/Skills For The Traveling Medical Assistant/Front Desk • Certified Medical Assistant (CMA) or Registered Medical Assistant (RMA)., • Experience in pain management, orthopedics, or a related specialty., • Experience with EMR systems, preferably eClinicalWorks. Education Requirements • High school diploma or equivalent is required., • Completion of a Medical Assistant training program is preferred. Benefits • Atrium Care Package available, upon eligibility (including healthcare plans, discount programs, and paid time off).

Wakefern Food Corp. is the largest retailer-owned cooperative in the United States and supports its co-operative members' retail operations, trading under the ShopRite®, Price Rite®, The Fresh Grocer®, Dearborn Markets®, Fairway Market®, Gourmet Garage®, DiBruno Bros.®, and Morton Williams® banners. Employing an innovative approach to wholesale business services, Wakefern focuses on helping the independent retailer compete in a big business world. Providing the tools entrepreneurs need to stay a step ahead of the competition, Wakefern’s co-operative members benefit from the company’s extensive portfolio of services, including innovative technology, private label development, and best in class procurement practices. About You Your contribution: This Senior Technology Auditor position will be responsible for planning and performing information systems (IS) and information technology (IT) audits that support business operations; management advisory services; special projects; interface with our external audit firms and/or other third-party providers related to assurance or advisory activities. Interact with Tech and business management on IT operation changes and emerging technologies. Participate in the development of the tech audit plan. Manage project assignments, budgets, and timelines to ensure the timely and effective completion of assigned projects. This individual must be a fast learner who can work independently and collaborate well with team members. Must demonstrate strong audit skills and exhibit high-energy and motivation to work in an ever flexible and changing work environment. This position is located in Edison, NJ. What you will do: • Plan and execute all aspects of the audit engagement lifecycle for assigned audits and advisory projects. These activities include risk assessment, audit planning (comprises process walk-through, flowcharts & audit program development), audit testing, control evaluation, report drafting/distribution and follow-up, and verification of issue closure., • Evaluate processes and controls for proper design and operational effectiveness & efficiency., • Prepare work paper documentation in accordance with departmental guidelines. Review staff work papers, if applicable., • Identify and recommend control enhancements and process improvement., • Communicate findings and value-added recommendations for corrective action., • Present audit results to stakeholders and agree on timeliness of corrective action implementation., • Audit key systems functionality and controls., • Conduct pre- and post-implementation reviews and participate in related task forces., • Participate in Disaster Recovery testing., • Participate in new system development (SDLC) related to both the wholesale and retail areas., • Utilize software (ACL, QMF for Windows, Microsoft Excel, and Active Data) for data acquisition and performing analytics for IS, financial and operational audits, and projects., • In conjunction with other audit team members, coordinate the external audit firm’s annual SOC-1 (ShopRite Financial Services, RAPID Computer Generated Inventory system/Store Inventory) reviews. Assist with testing; setting up interviews and status meetings with key staff; gathering documentation; reviewing and distributing the final reports to Wakefern management, retail member management and retail member accounting firms., • Participate in location accuracy verification testing at warehouse facilities, and physical inventory observations at warehouse facilities and at retail units, when needed., • Maintain technical auditing proficiency through conferences/seminars, in-house courses, peer group associations and user groups., • Provide guidance and direction to staff level auditor(s). Perform special projects as deemed necessary What we’re looking for: • Four-year college degree in Business Administration, Information Systems, Information Technology, Computer Science or other IT-related disciplines., • Relevant professional certification (such as CISA, CISSP, CRISC or CIA) strongly preferred., • Three-five years prior audit experience., • Understanding of key IT processes., • Excellent PC skills which include MS Office Suite, Active Data, Visio, ACL and QMF for Windows. Knowledge and familiarity with SAP S/4 Hana, Dayforce HCM, Oracle, PeopleSoft software and Oracle SQL query software and Power BI a plus., • Ability to leverage data analytics., • Computer programming experience (such as Java, Python) a plus., • Capacity to work independently, with limited required direction and guidance, and provide appropriate directions to other internal audit project team members., • Demonstrates strong verbal and written communication skills to effectively present to peers and management., • Exhibit the leadership skills needed to sell ideas and obtain management buy-in for constructive change., • Knowledge of the Institute of Internal Auditor’s (IIA) Global Internal Audit Standards, COSO, IT frameworks (e.g., NIST, ISO, COBIT) and ERM., • Experience in performing multiple projects and working with varying team members. How you will work: • Ability to work a hybrid schedule as established by the company to work, • Travel to various Wakefern locations and distribution centers, as needed., • Periodically work in a refrigerated warehouse environment How you will succeed: Core Competencies • Communicate Effectively: Communicates thoughts and ideas in a well-organized manner, encouraging two-way communication., • Build Relationships: Creates cross-functional partnerships through the development and maintenance of constructive and cooperative relationships., • Stay Competitive: Demonstrates a mindset of continuous improvement while exhibiting passion and enthusiasm for their work., • Embrace Change: Looks for new ways of working by supporting advancements in processes and technology., • Develop You: Identifies and capitalizes on opportunities for personal and professional career growth., • Drive for Results: Supports divisional and strategic objectives through achievement of work goals. Company Perks: • Vibrant Food Centric Culture, • Comprehensive medical, dental and vision package, • Competitive Salary and Paid Time Off, • Fitness Reimbursement and Well-Being Program, • Corporate Training and Development University, • Collaborative team environment, • Paid Parental Leave, • 401K, • Matching Gifts and Community Volunteer Involvement Compensation and Benefits The salary for this position is $85,000 - $105,000 annually. Placement in the salary depends on several factors, including experience, skills, education, geography, and budget considerations. Wakefern is proud to offer a comprehensive benefits package designed to support the health, well-being, and professional development of our Associates. Benefits include medical, dental, and vision coverage, life and disability insurance, a 401(k) retirement plan with company match, paid time off, holidays, and parental leave. Associates also enjoy access to wellness and family support programs, fitness reimbursement, educational and training opportunities through our corporate university, and a collaborative, team-oriented work environment. Many of these benefits are fully or partially funded by the company, with some subject to eligibility requirements.

Job Description Whitestone Associates, Inc. is a 100% employee-owned Geotechnical and Environmental consulting firm with offices throughout the eastern United States. We are committed to building a collaborative team environment where employee-owners are encouraged to grow professionally, take on meaningful responsibility, and contribute to the continued success of the organization. This is a fully in-office, on-site position. We are seeking a motivated, detail-oriented Junior Accountant to join our Finance team. This is an excellent opportunity for a recent graduate or early-career accounting professional looking to build a strong foundation in accounting and finance. Key Responsibilities • Process a high volume of vendor invoices, ensuring invoices are accurately coded, entered, and routed for approval;, • Process vendor payments accurately and in accordance with established payment schedules;, • Manage vendor setup and maintenance, including obtaining and maintaining required documentation such as Certificates of Insurance, W-9s, and subcontractor agreements;, • Review and process employee expense reports and company credit card statements, including verification of supporting documentation and appropriate accounting treatment;, • Reconcile accounts payable transactions, vendor statements, and related accounts, researching and resolving discrepancies as needed;, • Coordinate with employees, project managers, and vendors to resolve invoice, payment, and account discrepancies and respond to related inquiries;, • Maintain accurate and organized accounting records and supporting documentation; and, • Assist the Finance team with additional accounting activities and projects as needed. Qualifications • Associate's or Bachelor's degree in Accounting, Finance, Business Administration, or a related field preferred;, • Recent graduates and candidates beginning their accounting careers are encouraged to apply;, • Previous accounting, accounts payable, bookkeeping, or related internship experience is a plus, but not required;, • Strong attention to detail, organization, and ability to manage multiple priorities in a high-volume environment;, • Strong analytical and problem-solving skills;, • Excellent written and verbal communication skills;, • Proficiency with Microsoft Office, particularly Excel and Outlook; and, • Experience within the AEC industry or a related professional services industry is a plus, but not required. Higher compensation than the amount listed below may be offered commensurate with experience and qualifications. Salary Range $60,000—$65,000 USD Benefits: Benefits eligibility is dependent on full-time employment status. • Whitestone's Employee Stock Ownership Program (offered at no cost to each eligible employee), • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health & Dependent Care Flexible Spending Accounts, • Traditional & Roth 401K Plans with Company Match, • Long Term & Short Term Disability Insurance, • Company-Sponsored Life & AD&D Insurance, • Multiple AFLAC Insurance Products, • Pet Insurance, • Identity Theft Protection, • Group Legal Plan, • Multiple Corporate Discount Programs, • Employee Assistance Program (EAP) Whitestone Associates, Inc. is an Equal Opportunity Employer and does not tolerate unlawful discrimination in its employment practices. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, citizenship status, age, disability, protected veteran status, or any other status protected by applicable federal, state, or local law. Whitestone does not tolerate harassment or discrimination based on any protected characteristic. All complaints of harassment are taken seriously and will be investigated promptly and thoroughly.

Job DescriptionJob Title: CT Scan Technologist Location: Edison, NJ 08818 Job Type: Contract (No Benefits) Contract Duration: 13 Weeks Shift: Evening Shift Work Schedule: Monday–Friday, 3:00 PM–11:30 PM (5 × 8-hour shifts) Holiday Requirement: Holidays Required On-Call Requirement: No On-Call Duties Local Candidates: Required Travelers: Accepted Pay Rate • Travel Candidates: $2,600–$2,800 per week, depending on experience, • Local Candidates: $65–$70 per hour, depending on experienceJob Summary We are seeking a skilled and experienced CT Scan Technologist to perform computed tomography (CT) examinations and related diagnostic imaging procedures. The successful candidate will produce high-quality cross-sectional and three-dimensional images to assist physicians in diagnosing and treating medical conditions. The technologist will be responsible for patient preparation, image acquisition, contrast administration as authorized, image quality assessment, and maintaining accurate clinical documentation. This position requires the ability to work efficiently in a fast-paced Emergency Department (ED) environment while supporting both CT and X-ray modalities. Key Responsibilities • Perform routine and complex CT imaging procedures according to established protocols and safety standards., • Obtain and review patients' clinical histories and ensure relevant information is accurately documented and uploaded to the Picture Archiving and Communication System (PACS)., • Review contrast screening questionnaires with patients and/or family members, verify their accuracy, and document the information in the Electronic Medical Record (EMR)., • Identify and administer contrast media for CT examinations as prescribed by an authorized healthcare practitioner., • Review examination orders for accuracy and appropriateness. Contact radiologists and referring physicians to clarify orders or obtain additional clinical information when necessary., • Coordinate with physicians to confirm examination requirements and ensure compliance with established CT protocols., • Verify insurance authorization and submit examination modification documentation for insurance re-verification when required., • Obtain outside imaging studies and associated reports, coordinate their availability in the electronic medical record and PACS, and facilitate comparison by radiologists., • Provide examination images and copies of reports to authorized patients, physicians, and family members in accordance with applicable policies., • Evaluate images using PACS to confirm correct patient identification, image quality, and diagnostic adequacy., • Review relevant medical records and consult with patients, caregivers, and healthcare providers to establish appropriate scanning protocols and support patient safety., • Assess patient readiness and ensure proper preparation before imaging procedures., • Prepare patients for scanning using appropriate positioning, shielding, immobilization devices, and other necessary measures., • Determine the appropriate contrast type and dosage in accordance with established protocols and authorized orders., • Explain procedures clearly to patients, answer questions, address concerns, and document relevant information., • Perform venipuncture, assess IV patency, and maintain intravenous access according to established clinical guidelines., • Monitor patients for adverse reactions and respond appropriately during and after imaging procedures., • Maintain efficient imaging workflow in a busy Emergency Department while delivering safe, timely, and high-quality patient care., • Be willing and able to work across both CT and X-ray modalities as required., • Maintain compliance with departmental policies, professional conduct standards, attendance requirements, and punctuality expectations., • Maintain continuing education credits and comply with applicable professional certification requirements., • Work scheduled shifts and holidays as required. Overtime may be necessary to support patient care needs.Required Skills and Experience, • Minimum 2 years of CT imaging experience required; 5 years preferred., • Experience working in a fast-paced Emergency Department environment is required., • Experience operating CT equipment and familiarity with its software and hardware., • Experience with the facility's CT equipment is required., • Epic EMR experience required., • Fuji PACS experience required., • Thorough understanding of PACS systems and diagnostic imaging workflows., • Knowledge of human anatomy, physiology, and radiographic positioning techniques., • Familiarity with hospital information systems (HIS) and radiology information systems (RIS)., • Ability to work in both CT and X-ray modalities., • Strong patient communication, organizational, and time-management skills., • Ability to maintain image quality, patient safety, and workflow efficiency in a high-volume clinical environment., • Commitment to maintaining continuing education credits and professional competency.Required Education, • Graduate of an accredited Radiologic Technology program., • High school diploma or equivalent.Required Certifications and Licensure, • Valid New Jersey Department of Environmental Protection (NJ DEP) Diagnostic Radiography License., • ARRT certification in Radiography (R.T.(R)) required., • American Heart Association Basic Life Support (BLS) certification required., • ARRT certification in Computed Tomography (CT) must be obtained within 12 months of the hire date, as applicable., • BLS certification must be maintained in accordance with applicable requirements.Physical Requirements, • Ability to lift at least 25 pounds., • Ability to push and pull at least 50 pounds., • Ability to stand for a minimum of 6 hours per day., • Ability to assist with patient positioning, transfers, and other physical tasks associated with diagnostic imaging.

Job DescriptionDescriptionPhysician Extender Location: Old Bridge, NJ Entity: Alliance Orthopedics Reports To: Lead Physician Extender Alliance Orthopedics is currently looking to add to our mix of talented professionals! This is a great opportunity to join a dynamic, fast-growing company committed to making the world a healthier place for all. Alliance Orthopedics, the region's most dynamic multidisciplinary practice, is seeking an energetic, motivated, and articulate addition to our team! Our Physician Extenders work side-by-side with our medical team. ATCs are an integral part of our sports medicine team of medical doctors, orthopedic surgeons, functional medicine practitioners, and pain management physicians. Additionally, our Physician Extenders function as the medical liaisons to our conservative care team of chiropractors, physical therapists, clinical athletic trainers, occupational therapists, exercise physiologists, and more! The ideal candidate will thrive in this role given the clinical background that ATCs possess. A licensed athletic trainer brings a unique role and perspective to the medical arm of our practice. What sets Alliance Orthopedics apart is our collaborative approach. Medical and conservative care teams work hand in hand to eliminate barriers, improve communication, and collapse recovery timelines. If you are passionate about helping patients achieve meaningful outcomes, thrive in a collaborative environment, and are committed to becoming Better Every Day, Alliance Orthopedics offers an opportunity to grow your career while making a lasting impact on the lives of others. ON THE JOB TRAINING PROVIDED!!! (Must possess a valid Athletic Trainer License in the state of New Jersey to be considered for the role) Key ResponsibilitiesSummary of Responsibilities: • Build rapport and relationships with our patients! Understand THEIR GOALS!, • Primary responsibility pertains to medical care coordination Obtain clinical history and perform preliminary assessments/evaluations • Organize physician schedules, notes, imaging studies, care plans, etc. Record patient vitals, test results, progress notes, and other medical information while maintaining strict confidentiality • Become the compassionate liaison between the physician and patient, providing support, attention, and encouragement to the patients and their families, • Conduct post-procedure next day follow-up, • Facilitate distribution of necessary Durable Medical Equipment, • Ensure compliance with all healthcare regulations including but not limited to, HIPAA and OSHA, • Partner with the Clinic Supervisor to execute additional administrative duties, • Stand out as a valuable team member, bringing energy in collaboration with all other healthcare disciplines in a team setting to help our patients get BETTER EVERYDAY!Requirements:, • Valid New Jersey Athletic Trainer License REQUIRED, • Degree from and accredited Athletic Training Education Program, • Basic understanding of patient care, medical terminology, coding procedures, reference tools, and appropriate clinical pharmacology for scope of practice, • Excellent interpersonal, organizational, and customer service skills, especially the ability to show compassion for patients coming from all walks of life, • Familiarity with electronic medical record systems, • Willingness to challenge patients, other team members, and yourself!Benefits:, • Consistent, predictable work schedule (no overnights or extended travel!), • Clinic-based opportunity for ATCs (no rain gear necessary!), • Collaborative environment fostering continued growth in a multidisciplinary approach to medicine, • VERY competitive salary and a runway for professional growth, • Medical, Dental, and Vision Insurance, • Accrued paid time off, sick time, and six paid company holidays, • Annual CEU reimbursement budget for licensed clinicians, • Retirement savings account with a percentage-based company matchBackground Check Requirement: Employment is contingent upon the successful completion of a background check, which may include verification of employment history, education, criminal records, and other relevant information as permitted by law

Job DescriptionWachter's greatest asset is the people who work here. Join the Wachter family and chart your career path! We are seeking experienced Fire Alarm/Intrusion/Burglar Installation Technicians to join our growing team. This role involves installing, troubleshooting, and maintaining fire alarm systems across various commercial and retail locations nationwide. Ideal candidates will have strong technical skills, a commitment to safety, and the flexibility to travel extensively. We seek self-motivated and reliable technicians who can work independently and find solutions to complete the job. Long-term employment with competitive pay and exceptional benefits for qualified candidates. We value relationships and invest in our employees. Why Wachter? • Full-time work, • Competitive Compensation based on experience, • Paid weekly, • Per-Diem paid when overnight travel is required, • Company vehicle provided, in some cases, after initial 2-4 weeks of employment, • Drive time and mileage paid for use of personal vehicle when travel is required, • Paid Vacation and Holidays, • Opportunities for certification and career advancement, • Supportive team environmentBenefits Package- Company Paid!, • Medical, Dental, Prescription & Vision Benefits, • Life, AD&D, and LTD insurance, • Paid Vacation and Holidays, • Company-Matched 401(k) and IRA Retirement Savings.Key Responsibilities:, • Installation, troubleshooting, and maintenance of fire alarm systems infrastructure., • Running low-voltage cabling in commercial buildings, including drilling concrete walls and limited conduit work., • Installing cable support structures such as j-hooks, cable racks, and innerduct., • Conducting tests to ensure all newly installed cable systems and component devices are operational., • Troubleshooting issues with cable networks and fire alarm panels., • Ensuring all installations and repairs comply with NFPA standards, including NFPA 70 and 72., • Collaborating with team members on pre-installation design and planning., • Maintaining accurate and detailed records of all work performed., • Adhering to all required project safety requirements as set forth by Wachter, our customers, or OSHA.Qualifications:, • Proven experience in field installation within security and life safety environments: Fire Alarm and/or Intrusion., • In-depth knowledge of NFPA standards, especially NFPA 70 and 72., • Experience reading blueprints and site maps., • Comfortable working at heights of 20–60 feet using lifts., • Ability to work in cramped spaces and operate BOOM or scissor lifts., • Proficiency with smartphones, computers, email, spreadsheets, and Microsoft Office., • Possession of basic PPE and reliable transportation during the initial training period., • Valid driver’s license with a clean driving record (no DUI/DWI in the last 3 years)., • Availability for extensive travel (2–6 weeks at a time) and flexible shifts including nights and on-call work.Preferred Qualifications:, • Knowledge of cabling infrastructure and conduit installation, • NICET Level 2 certification or State-required licenses., • Ability to identify independent colors and learn color codes., • Experience with multiple Intrusion and Fire system manufacturers. Join our team and earn up to a $15,000 signing bonus based on experience and licenses, plus extra pay incentives for night shifts! Wachter is a family-owned company since 1930 and we see each employee as a critical piece of the Wachter Family. With over 900 licenses across the country, Wachter serves commercial and industrial clients with the right technologies needed to keep them successful. We design, install, and maintain the technologies that keep businesses operating efficiently. Our team of dedicated electricians, engineers, and technicians provides electrical, data, security, communications, and automation services to clients in numerous industries. Follow us on Facebook, Instagram, Twitter, and LinkedIn. We're an equal opportunity employer. All applicants will be considered for employment without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescriptionPhysical Therapist Location: Old Bridge, NJ Entity: Alliance Orthopedics Reports To: Clinical Director Alliance Orthopedics is a multidisciplinary healthcare organization dedicated to helping patients get back to the activities they love. Our integrated team of medical providers, orthopedic specialists, physical therapists, occupational therapists, chiropractors, athletic trainers, and rehabilitation professionals work together to create a seamless patient experience and deliver exceptional outcomes. What sets Alliance Orthopedics apart is our collaborative approach. Medical and conservative care teams work hand in hand to eliminate barriers, improve communication, and collapse recovery timelines. If you are passionate about movement and recovery, thrive in a collaborative environment, and are committed to becoming Better Every Day, Alliance Orthopedics offers an opportunity to grow your career while making a lasting impact on the lives of others. Summary of Responsibilities & BenefitsBenefits: • Collaborative environment fostering continued growth in a multidisciplinary approach to medicine, • New Hire Mentorship Program, • VERY competitive salary and a runway to $115K based on performance, • Accrued paid time off, sick time, and six paid company holidays, • Annual CEU reimbursement budget for your continued clinical development, • New Hire Mentorship Program, • Tuition Reimbursement (terms apply), • 401(k) matching, • Retirement savings account with a percentage based company match, • Full paid Health Insurance - Health insurance, Dental insurance, Vision insurance, • Long and Short Term Disability, • Cancer Care coverage, • Mental Healthcare Benefits, • Life insuranceWhat You'll Do:, • Build genuine patient relationships, understand their goals, not just their diagnosis, • Deliver engaging one-on-one evaluations where patients feel heard, • Design and execute individualized rehab and fitness-oriented programs to help patients regain lost skills, • Collaborate directly with MDs, surgeons, and specialists for advanced care, • Serve as a liaison between the rehab floor and our medical and surgical teams, • Maintain timely, accurate documentation in our EMR system, • Prepare patients confidently for return to work, sport, school, and life, • Educate caregivers and/or family members of patients on patient needs, • Maintain professional knowledge and technical progress in order to provide clients with the best treatment program available, • Evaluate patient condition regarding physical and basic mental health, • Comply with company rules, regulations, and procedures, • Support marketing initiatives by attending marketing and outreach events as requested, • Bring energy, this clinic has a culture, and you'll be part of setting it, • Stand out as a valuable team member in collaboration with all other healthcare disciplines in a team setting to help our patients get BETTER EVERYDAY!Who We're Looking For:, • Degree in Physical Therapy from an accredited education program, • Passed the National Physical Therapist Examination (NPTE), • Completion of the American Physical Therapy Association residency program (preferred), • Valid New Jersey Physical Therapy License, • Possess up-to-date knowledge of treatment practices and physical therapy programs, • Excellent interpersonal, organizational, and customer service skills, especially the ability to show compassion for patients coming from all walks of life, • Comfortable with EMR systems and timely documentation, • Someone who brings energy and raises the standard for everyone around them, • Willingness to challenge patients, other team members, and yourself!Alliance Orthopedics is the region's most dynamic multidisciplinary orthopedic practice with nine clinic locations across New Jersey., • Bloomfield, • Fair Lawn, • Union, • Randolph, • East Brunswick, • Middletown, • Freehold, • Old Bridge, • Toms River Job Type:, • Full-time, on-site, • One location, • Exempt Background Check Requirement: Employment is contingent upon the successful completion of a background check, which may include verification of employment history, education, criminal records, and other relevant information as permitted by law.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Energy Audit to join our team. The Energy Engineer (Energy Audit) will lead the technical execution of ASHRAE Level I, II, and III energy audits across commercial, institutional, and multi-family buildings. This role focuses on identifying Energy Conservation Measures (ECMs), quantifying savings opportunities, and producing high-quality client deliverables that drive energy efficiency and decarbonization outcomes. Responsibilities • Perform ASHRAE Level I/II/III Energy Audits: Analyze utility bills (electric, gas, steam, water) and architectural, mechanical, electrical, and plumbing drawings to baseline building energy consumption., • Conduct Onsite Audits: Lead and support field investigations of building envelope, HVAC equipment, lighting, domestic hot water, plug loads, and building automation systems using hand tools, light meters, data loggers, and infrared cameras., • Identify Energy Conservation Measures (ECMs): Develop a comprehensive list of viable ECMs tailored to the facility, occupancy, and client goals, including operational, capital, and decarbonization measures (e.g., electrification, heat pumps)., • Perform Energy and Cost Analyses: Calculate energy and demand savings using engineering calculations, bin analysis, spreadsheet tools, and/or simplified energy models; develop installed cost estimates and financial metrics (simple payback, ROI, NPV, IRR)., • Generate Technical Reports: Author client-ready audit reports including executive summaries, ECM write-ups, savings tables, recommendations, and supporting appendices., • Support Utility Incentive and Decarbonization Programs: Prepare documentation supporting utility incentive applications (e.g., NYSERDA, ConEd, NJ Clean Energy) and local carbon legislation compliance (e.g., NYC Local Law 97, BERDO)., • Client and Project Coordination: Coordinate site visit logistics, communicate progress to project managers and clients, and respond to client questions during and after the audit. Requirements • Bachelor's in Engineering (Mechanical, Electrical, Architectural, or Facilities), • 1-3 years of experience performing energy audits or energy engineering work, including at least one internship, co-op, or full-time role, • Working knowledge of HVAC systems, lighting systems, building envelope, controls, and renewable systems, • Familiarity with ASHRAE Procedures for Commercial Building Energy Audits, • Experience using audit tools (data loggers, light meters, IR cameras, combustion analyzers) preferred, • Proficient in Microsoft Office (especially Excel), • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CEM, or CEA credential preferred (or willingness to obtain within first year), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description Company Overview: Harris Energy Solutions, LLC (HES) offers nationwide Energy Consulting Services, specializing in a wide range of energy management solutions. Our distinguished team includes skilled Engineers, Certified Energy Managers (CEM), Certified Building Commissioning Professionals (CBCP), and Solar Design Specialists. With extensive experience across various facets of energy management, HES excels in services such as building energy modeling, renewable energy consulting, master planning, energy auditing, and building commissioning. Our commitment to excellence and innovation ensures we deliver tailored, cutting-edge solutions that meet the unique energy needs and goals of our clients across the nation. Job Description: The Senior Commissioning Engineer is responsible for leading the commissioning process across all projects, ensuring that building systems are designed, installed, tested, and maintained to perform in accordance with the owner's operational requirements. This role will manage a team of commissioning professionals, collaborate with internal and external stakeholders, and develop strategies to improve commissioning practices and quality assurance across the organization. Key Responsibilities: • Lead and oversee all commissioning activities for new and existing projects across the organization., • Develop and implement company-wide commissioning policies, standards, and procedures., • Develop and oversee the full commissioning process, from design through occupancy and post-occupancy evaluation., • Manage and lead a multidisciplinary commissioning team, including internal staff and external consultants., • Ensure compliance with project specifications, codes, standards, and sustainability guidelines (e.g., LEED, ASHRAE, ISO)., • Coordinate closely with architects, engineers, contractors, and facility operators to integrate commissioning activities into project workflows., • Oversee functional performance testing of all building systems including HVAC, electrical, plumbing, life safety, controls, and specialty systems., • Review design documents and submittals to identify commissioning requirements and influence quality outcomes., • Develop commissioning plans, checklists, test scripts, and final reports for project documentation., • Monitor progress, resolve issues, and ensure commissioning milestones are met on time and within budget., • Identify and resolve system performance issues prior to building turnover., • Lead training sessions for facilities staff on system operations and maintenance., • Track and report on commissioning progress, budgets, and resource allocation., • Lead and manage Measurement and Verification (M&V) activities to validate energy performance, optimize building systems, and ensure alignment with energy goals and design intent. Incorporate M&V activities into Cx Plans and communicate requirements to facilities staff prior to building turnover., • Provide technical guidance and mentorship to team members and stakeholders., • Continuously improve commissioning processes and implement best practices across all projects., • Develop and implement training programs for junior commissioning engineers, including hands-on learning, technical on-boarding, mentorship, and professional development planning., • Promote a culture of technical excellence, accountability, and continuous learning within the commissioning team. Education and Experience Requirements: • Bachelor's degree in Mechanical, Electrical, or Building Engineering, or a related field, • Minimum of 8 years of experience in project management, building systems commissioning, and/or facilities management, with at least 5 years in a leadership or management role., • Certifications Preferred: PE, CCP, CBCP, BCxP, CxA, LEED AP with specialty, PMP, • Experience with energy modeling and M&V frameworks such as IPMVP, • Deep understanding of mechanical, electrical, and controls systems., • Stay current on industry best practices, emerging technologies, and compliance standards (ASHRAE, IEEE, NFPA, etc.), • Proven ability to manage large-scale and complex commissioning projects., • Experience with Data Center/Mission Critical Commissioning and Hospital Commissioning a plus., • Strong leadership, communication, and organizational skills, • Ability to travel to project sites as needed Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $110,000 – $130,000 per year Benefits: • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule: • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description Tri-State Energy (TSE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. Regionally, TSE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. We are consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are seeking an experienced Senior Lead Energy Engineer to join our team in Woodbridge, N.J. The ideal candidate will be responsible for leading projects from auditing through implementation. They will come with 7+ years of relevant experience and strong technical competence. Essential Job Functions • Lead and execute ASHRAE Level I–III energy audits., • Conduct on‑site inspections, data collection, and measurement & verification., • Develop detailed engineering analyses and ECM calculations., • Provide design support and review technical drawings., • Coordinate project activities with clients and contractors., • Prepare technical reports, proposals, and documentation., • Mentor junior engineers. Qualifications • Bachelor’s or Master’s degree in relevant engineering field., • Minimum 5 years of experience., • Certified Energy Manager (CEM) is required., • Must reside in New Jersey., • Valid NJ driver's license., • Strong knowledge of building mechanical, electrical and controls’ systems and energy codes. Physical Demands of the Job • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Work Environment • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, and electrical current. Diversity TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state or local laws. TSE is a drug-free workplace. Screening TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Why work with us? • Medical, vision, dental insurance and more, including 401(k) and employer match. Compensation • Salary Range: $115,000-$130,000/annual (Commensurate with experience).

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organisation services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organisations. It also has a rapidly developing presence in highly specialised and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralised and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. Job Description This is a hands-on commissioning, qualification and validation role with high growth potential. You will work alongside our CQV Lead on facility, utility and equipment qualification programs for pharmaceutical and biotechnology clients — writing and executing protocols, working in the field, and building toward owning systems independently. We are looking for someone with real GMP experience who wants to move further into validation than their current role allows. Author and execute commissioning and qualification protocols — IQ, OQ and PQ — for utilities, equipment and facilities. Perform field verification and walkdowns against P&IDs, and log discrepancies for resolution. Execute qualification sampling programs and maintain complete, accurate records — sample logs, chain of custody and executed protocols. Write deviation reports and summary reports, and support investigations. Support risk assessments and FMEAs, and the sampling plans that follow from them. Support change control, and help close out qualification packages. Work with client engineering and quality teams on site, representing Eurofins professionally. As you grow: take ownership of systems end to end, mentor newer engineers, and lead your own qualification workstreams. Qualifications Must haves: Two or more years of hands-on experience in a GMP-regulated environment, with direct involvement in commissioning, qualification or validation activity. We will consider strong candidates from adjacent roles — QC or laboratory analysts who have executed equipment qualifications, calibration and metrology technicians, manufacturing or maintenance engineers from a pharmaceutical site. A working understanding of IQ, OQ and PQ, and of why qualification documentation matters. Ability to read and work from technical drawings, particularly P&IDs. Clear technical writing. Much of this role is producing documents that a regulator may read. Familiarity with cGMP under 21 CFR Parts 210 and 211, and with good documentation practice. Degree in engineering, microbiology or a life science is preferred. Equivalent hands-on experience will be considered in its place. Careful, accurate and methodical. Comfortable being held to a document trail. Valid driver's licence. Able to work on active construction and manufacturing sites, including gowned work and occasional extended hours during qualification campaigns. None of the following are expected on day one. Each is something we will teach, and each is a reason to put your application forward. Utilities experience — water for injection, purified water, clean steam, compressed air, nitrogen, oxygen. Environmental monitoring, aseptic operations, or cleanroom experience. MODA, LIMS or other electronic data systems, and computer system validation under GAMP 5. Risk assessment methodology under ICH Q9, or FMEA facilitation. EU GMP Annex 1, ISO 14644, or USP compendial testing requirements. Electronic validation platforms such as Kneat. Additional Information Positions are full-time, working Monday-Friday 8am-5pm, overtime as needed. Candidates currently living within commutable distance to Edison, NJ are encouraged to apply. Excellent full time benefits including comprehensive medical coverage, dental, and vision options • Life and disability insurance, • 401(k) with company match, • Paid vacation and holidays Eurofins USA BioPharma Services is a Disabled and Veteran Equal Employment Opportunity employer.

Job Description Dental Office Manag .We have modern facility with CBCT, CAD/CAM,digital xray etc.with endodontist and periodontist Spanish preferred Multispeciality group practice with 5 yrs experience. Dentrix Ascend Sofrware exp.of PPO and DHMO insurance plan is must.Billing ,account receivable, creating reports on daily, weekly monthly basis.Care credit, processing electronic insurance payments, handling insurance questions by patients as they arise, collecting and posting payments..The right candidate has extensive knowledge in dental codes and insurance matters while dealing with PPO, DHMO dental networks.Claims Management: Follow-up on all unresolved claims, claim correction, resubmission, narrative letters & appeals.Billing Insurance: Daily e-claims review, errors correction, & submission, narratives submission, attachments drafted.Patient Balances aging over 30 days: research, collection calls after EOB/ETFs entry to recover remaining balance.Statements-Aging patient balances statements and overdue letters, accounts management up to collection agency processing.Enter payments: insurance payments from EOBs, ETFs, & patient payments.Benefits Verification: eligibility, full plan breakdown in your system for new and emergency patients, and updating changes to existing accounts, when required. Compensation based on performance .we contribute monthly #300 for medical insurance

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at http://cornerstonebuildingbrands.com. Job Description Base Pay: $20.00 The QA Technician at Cornerstone Building Brands is responsible for ensuring product quality, compliance with customer and company requirements, and adherence to Quality Management System (QMS) standards. Reporting to the Quality Supervisor, this position performs inspections, testing, audits, and documentation activities while supporting continuous improvement initiatives across manufacturing operations. Based on historical quality technician responsibilities, the role includes product verification, quality documentation, customer requirement compliance, and support of stable manufacturing processes. Key Responsibilities • Perform incoming, in-process, and final inspections to verify product conformance., • Conduct product testing and document inspection results., • Monitor compliance with Critical to Quality (CTQ) requirements and standard work instructions., • Perform Layered Process Audits (LPA) and documentation reviews., • Support Non-Conformance Report (NCR), Corrective Failure Analysis (CFA), and Defect Material Report (DMR) processes., • Investigate quality issues and participate in root cause analysis activities., • Assist with containment activities and corrective action implementation., • Train production associates on quality standards, inspection methods, and customer requirements., • Utilize measuring devices including calipers, gauges, and specialized test equipment., • Support customer complaint investigations and verification activities., • Participate in continuous improvement, Kaizen, and waste reduction initiatives., • Maintain audit readiness and support internal and external audits.Qualifications, • High school diploma or GED required., • Minimum 3 years of manufacturing, inspection, or quality experience preferred., • Experience with quality audits, inspections, and documentation., • Knowledge of quality tools, root cause analysis, and corrective actions., • Ability to read and interpret specifications, drawings, and procedures., • Strong Microsoft Excel, Word, and Outlook skills., • Excellent communication and organizational skills., • Ability to work independently and in a team environment., • Experience in a regulated manufacturing environment is preferred. Additional Information All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job DescriptionDescriptionRadiologist Technologist Location: East Brunswick, NJ Entity: Alliance Orthopedics Reports To: Senior Operations Manager As a Radiologist Technologist, you will work side-by-side with our medical and conservative care teams. Imaging is an integral part of our practice that includes medical doctors, orthopedic surgeons, functional medicine practitioners, and pain management physicians. Additionally, our Radiologic Technologists function as medical liaisons within our care team of physical therapists, chiropractic physicians, clinical athletic trainers, occupational therapists, exercise physiologists, and more! An experienced Radiologic Technologist brings a unique role and perspective to the conservative care arm of our practice. Alliance Orthopedics Alliance Orthopedics is a multidisciplinary healthcare organization dedicated to helping patients get back to the activities they love. Our integrated team of medical providers, orthopedic specialists, physical therapists, occupational therapists, chiropractors, athletic trainers, and rehabilitation professionals work together to create a seamless patient experience and deliver exceptional outcomes. What sets Alliance Orthopedics apart is our collaborative approach. Medical and conservative care teams work hand in hand to eliminate barriers, improve communication, and collapse recovery timelines. If you are passionate about movement, recovery, patient education, and helping people return to the activities they love, Alliance Orthopedics offers an opportunity to grow your career while making a lasting impact on the lives of others. Summary of Responsibilities: • Perform high-quality diagnostic X-ray procedures in accordance with physician orders and clinical protocols., • Prepare, position, and educate patients while ensuring comfort, safety, and proper radiation protection practices., • Conduct quality control checks and maintain imaging equipment to ensure optimal performance and image quality., • Accurately document patient information, imaging procedures, and related records in accordance with clinic policies., • Collaborate with providers and clinical staff to support efficient patient care and workflow., • Communicate imaging-related information to patients and healthcare team members as appropriate., • Maintain compliance with all regulatory, safety, licensure, and certification requirements., • Participate in ongoing professional development to enhance imaging knowledge and technical skills., • Support scheduling, recordkeeping, and administrative best practices to promote operational excellence., • Deliver exceptional patient service and contribute to a positive outpatient orthopedic care experience., • Willingness to challenge patients, other team members, and yourself., • Stand out as a valuable team member, bringing energy in collaboration with all other healthcare disciplines in a team setting to help our patients GET BETTER FASTER!Requirements:, • Graduate of an accredited Radiologic Technology program., • Current New Jersey State Radiologic Technologist License., • Current CPR/BLS certification preferred., • Strong knowledge of radiographic positioning, anatomy, radiation safety, and imaging protocols., • Ability to produce high-quality diagnostic images while ensuring patient comfort and safety., • Understanding of infection control standards, HIPAA regulations, and radiation protection practices., • Excellent interpersonal, organizational, and customer service skills, especially the ability to show compassion for patients coming from all walks of life.Benefits:, • Collaborative environment fostering continued growth in a multidisciplinary approach, • VERY competitive salary and a runway for professional growth, • Medical, Dental, and Vision Insurance, • Accrued paid time off, sick time, and six paid company holidays, • Annual CEU reimbursement budget for licensed clinicians, • Retirement savings account with a percentage based company matchAlliance Orthopedics is the region's most dynamic multidisciplinary orthopedic practice with nine clinic locations across New Jersey., • Bloomfield, • Fair Lawn, • Union, • Randolph, • East Brunswick, • Middletown, • Freehold, • Old Bridge, • Toms RiverJob Type:, • Full-time, on-site, • One location, • Non-Exempt, • Monday-Friday Schedule, • No weekendsBackground Check Requirement: Employment is contingent upon the successful completion of a background check, which may include verification of employment history, education, criminal records, and other relevant information as permitted by law Summary of Responsibilities & BenefitsSummary of Responsibilities: • Perform high-quality diagnostic X-ray procedures in accordance with physician orders and clinical protocols., • Prepare, position, and educate patients while ensuring comfort, safety, and proper radiation protection practices., • Conduct quality control checks and maintain imaging equipment to ensure optimal performance and image quality., • Accurately document patient information, imaging procedures, and related records in accordance with clinic policies., • Collaborate with providers and clinical staff to support efficient patient care and workflow., • Communicate imaging-related information to patients and healthcare team members as appropriate., • Maintain compliance with all regulatory, safety, licensure, and certification requirements., • Participate in ongoing professional development to enhance imaging knowledge and technical skills., • Support scheduling, recordkeeping, and administrative best practices to promote operational excellence., • Deliver exceptional patient service and contribute to a positive outpatient orthopedic care experience., • Willingness to challenge patients, other team members, and yourself., • Stand out as a valuable team member, bringing energy in collaboration with all other healthcare disciplines in a team setting to help our patients GET BETTER FASTER!Requirements:, • Graduate of an accredited Radiologic Technology program., • Current New Jersey State Radiologic Technologist License., • Current CPR/BLS certification preferred., • Strong knowledge of radiographic positioning, anatomy, radiation safety, and imaging protocols., • Ability to produce high-quality diagnostic images while ensuring patient comfort and safety., • Understanding of infection control standards, HIPAA regulations, and radiation protection practices., • Excellent interpersonal, organizational, and customer service skills, especially the ability to show compassion for patients coming from all walks of life.Benefits:, • Collaborative environment fostering continued growth in a multidisciplinary approach, • VERY competitive salary and a runway for professional growth, • Medical, Dental, and Vision Insurance, • Accrued paid time off, sick time, and six paid company holidays, • Annual CEU reimbursement budget for licensed clinicians, • Retirement savings account with a percentage based company matchAlliance Orthopedics is the region's most dynamic multidisciplinary orthopedic practice with nine clinic locations across New Jersey., • Bloomfield, • Fair Lawn, • Union, • Randolph, • East Brunswick, • Middletown, • Freehold, • Old Bridge, • Toms RiverJob Type:, • Full-time, on-site, • One location, • Non-Exempt, • Monday-Friday Schedule, • No weekendsBackground Check Requirement: Employment is contingent upon the successful completion of a background check, which may include verification of employment history, education, criminal records, and other relevant information as permitted by law

Job Description Physical Therapy Aide / Front desk assist(Full-Time). AASK Physical Therapy & Rehabilitation – For both South Plainfield ( 3 days) & East Brunswick locations ( 2 days). We are seeking a reliable, organized, growth oriented and bilingual Spanish-speaking support staff to help support daily operations in our fast paced outpatient physical therapy clinics. Most soffice work, insurance verification, and major admin work are all handled remotely by the office manager. This role focuses on routine,simple in-clinic support such as phone calls, scanning, faxing, filing, organizing documents, assisting patients, helping maintain a clean and organized clinic environment, and supporting therapists on the floor as needed as aide. Qualifications: Bilingual Spanish -Mandatory Healthcare or medical office experience preferred Knowledge with basic computer tech and Google spreadsheets and MS office mandatory. Organized, dependable, and quick to learn Friendly and professional with patients and staff Pre-PT, Healthcare Administration, and healthcare-related students are welcome to apply Experience or skill in any form of marketing will give the candidate priority and for longterm and full time options. Full time to begin with and $14–$16/ hour depending on experience and potential to grow. Sick days and Referral Bonuses are additional benefits offered. Health insurance and paid time off will be offered soon. Application instruction: Begin your message with AASK for [Your Name] and briefly mention your healthcare or medical office experience. Company DescriptionWhy Work for AASK? AASK is a welcoming, team-centered workplace where your contributions are truly valued. We believe in supporting our staff with clear training, consistent structure, and a positive environment that helps you grow both personally and professionally. You will be treated with respect, appreciated for your work, and surrounded by a team that genuinely cares about patient outcomes and each other. At AASK, you’re not just taking a job—you’re joining a compassionate team that feels like family.Why Work for AASK?\r\n\r\nAASK is a welcoming, team-centered workplace where your contributions are truly valued. We believe in supporting our staff with clear training, consistent structure, and a positive environment that helps you grow both personally and professionally. You will be treated with respect, appreciated for your work, and surrounded by a team that genuinely cares about patient outcomes and each other. At AASK, you’re not just taking a job—you’re joining a compassionate team that feels like family.

Job Description Dietary Supervisor RATE: $40,000- $46,000 Per Year BENEFITS: Weekly Employee Appreciation Event- “Thankful Thursday” Monthly Gift Giveaways!! Medical, Dental & Vision Insurance 401K Holiday Pay Paid Time Off HOURS: 11:30AM- 7:30PM Have off one day during the week and to work alternate weekends. About us: Alameda Center is committed to providing compassionate, high-quality care in a supportive, team-focused environment. We believe great care starts with great people, which is why we invest in our employees through accessible leadership, recognition programs, and the resources they need to succeed. If you're looking for a workplace where you'll be valued, supported, and able to make a meaningful difference every day, we'd love to have you on our team. POSITION SUMMARY: The Dietary Supervisor, is the second highest level position in the Food Services Department. He/she reports to the Food Service Director and assists the Director in planning and supervising activities of the department to provide service to residents, employees and visitors. The Assistant Food Service Director assists in providing technical guidance and administrative direction over food planning, menu formulation and serving of regular and therapeutic diets. RESPONSIBILITIES/ACCOUNTABILITIES: 1 Ensures responsibility for the quality and quantity of food served; 2 Adheres to all sanitary regulations governing handling and serving of food; 3 Oversees that meals are prepared and served on schedule; 4 Investigates trends and developments in dietary, practices and techniques, and evaluates their adaptability to dietary programs; 5 Develops, revises, and adapts work techniques and methods for more efficient operation of unit and for training employees; 6 Prepares and serves food in accordance with national standards and administrative policies within budget allowances; 7 Maintains accurate records and reports; 8 Offers assistance and input to Food Service Director during both the performance appraisal and disciplinary process for dietary staff; 9 Ensures that residents and families receive the highest quality of service in a caring and compassionate atmosphere which recognizes the individuals’ needs and rights; 10 Performs other duties as requested including Cooking. NOTE: These duties become the responsibility of the Supervisor in the absence of the Food Services Director. SPECIFIC EDUCATIONAL/VOCATIONAL REQUIREMENTS: 1 Food Service Certification in accordance with regulatory agencies is required. Associate degree in Food Service preferred. JOB SKILLS: 1 Knowledge of basic principles of dietetic, food sanitation and service. 2 Familiar with large-scale purchases and preparation of food, food and labor laws, and with accepted food service techniques. 3 Possess the ability to positively interact with personnel, residents, family members, visitors, government agencies/personnel and the general public. 4 Basic computer skills. 5 Provide annual verification of negative TB skin test. PERFORMS RELATED DUTIES: 1 Interacts with residents, families, visitors and employees. 2 Carries out other tasks as requested in situations where hands-on intervention/participation may be required.

Job DescriptionCompany Description Cornerstone Building Brands is a leading manufacturer of exterior building products for residential and low-rise non-residential buildings in North America. Headquartered in Cary, N.C., we serve residential and commercial customers across the new construction and Repair & Remodel (R&R) markets. Our market-leading portfolio of products spans vinyl windows, vinyl siding, stone veneer, metal roofing, metal wall systems and metal accessories. Cornerstone Building Brands’ broad, multi-channel distribution platform and expansive national footprint includes more than 18,800 team members at manufacturing, distribution and office locations throughout North America. Corporate stewardship and Environmental, Social and Governance (ESG) responsibility are embedded in our culture. We are committed to contributing positively to the communities where we live, work and play. For more information, visit us at cornerstonebuildingbrands.com. Job Description JOB DETAILS 3rd Shift Monday - Friday11:00 P.M. - 7:30 A.M. Pay: $23.00 Per Hour, plus $1 per hour shift differential Duties and Responsibilities • Performs all duties in a safe manner and follows all Cornerstone Building Brands safety rules, policies, and procedures., • Maintains an exemplary attendance record and reports to work on time., • Communicates effectively in English with operators, team members, supervisors, and support personnel., • Performs quality inspections of extruded PVC profiles throughout the production process to verify compliance with product specifications., • Conducts first-piece, in-process, startup, and final quality inspections according to work instructions, control plans, and quality standards., • Uses precision measuring equipment including tape measures, calipers, height gauges, profile gauges, wall thickness gauges, and other inspection tools to verify product dimensions., • Verifies profile dimensions, cut lengths, wall thickness, appearance, color consistency, gloss, and overall product quality., • Identifies and documents defects including but not limited to surface imperfections, contamination, burn marks, scratches, dents, dimensional variation, bow, twist, and color variation., • Ensures inspection frequencies are completed as required and documents all quality checks accurately., • Maintains product traceability by verifying labels, production information, lot numbers, line identification, and inspection records., • Approves or rejects product based on established quality standards and communicates nonconforming conditions immediately., • Works closely with Extrusion Operators to identify process deviations and recommends corrective actions to maintain product quality., • Places suspect or nonconforming material on hold and follows established containment procedures., • Completes required quality documentation, inspection reports, production records, and electronic data entry accurately and in a timely manner., • Assists with startup approvals, product changeovers, color changes, and first article inspections., • Performs calibration verification of inspection equipment and reports damaged or out-of-calibration measuring devices., • Monitors compliance with customer specifications, engineering drawings, work instructions, and quality procedures., • Supports root cause investigations, corrective actions, and continuous improvement initiatives to reduce scrap and improve product quality., • Reports quality, safety, equipment, or production concerns immediately to the Team Lead, Supervisor, Process Technician, or Engineering., • Works with Production, Maintenance, Engineering, and Quality teams to resolve quality issues., • Performs 5S activities and housekeeping duties to maintain a clean, organized, and safe work environment., • Assists other production lines or quality inspection areas as needed to support business requirements., • Performs additional duties as assigned.Qualifications, • Ability to accurately use tape measures, calipers, profile gauges, height gauges, wall thickness gauges, and other precision measuring equipment., • Ability to read and interpret engineering drawings, dimensional specifications, quality standards, work instructions, and production documentation., • Ability to identify cosmetic and dimensional defects while maintaining attention to detail., • Strong understanding of basic mathematics including addition, subtraction, multiplication, division, fractions, decimals, and conversions., • Ability to convert fractions to decimals and accurately interpret dimensional tolerances., • Ability to document inspection results accurately using written forms and computerized systems., • Ability to make sound quality decisions regarding product acceptance or rejection., • Basic computer skills including data entry, barcode scanners, and production software., • Ability to stand, walk, bend, reach, and inspect product for extended periods throughout the shift., • Ability to lift up to 50 pounds when handling product, samples, gauges, or inspection materials., • Ability to communicate effectively with Operators, Team Leads, Supervisors, Maintenance, Engineering, and Production personnel., • Ability to work independently while managing multiple production lines and changing priorities., • Previous experience in manufacturing quality control, extrusion, plastics, window and door components, or related manufacturing environment is preferred., • Knowledge of Lean Manufacturing, 5S, continuous improvement, SPC, or ISO quality systems is preferred., • Demonstrates strong attention to detail, organizational skills, problem-solving abilities, and commitment to producing high-quality products. Additional Information Site Location: 1 Silverline Dr. North Brunswick Township, NJ 08902 All your information will be kept confidential according to EEO guidelines. Location North Brunswick Township, NJ, USA Shift 3rd Shift Position Type Permanent Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at 281-897-7788 or HRCompliance@cornerstone-bb.com. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Note to External Recruiters Cornerstone Building Brands does not accept unsolicited resumes and will not pay fees for any candidate submissions that were not expressly authorized. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Job Description Senior, Microbiologist - 03.13.2024.pdf Job Description Date 01/2024 Location 1200 Airport Road, North Brunswick NJ Title Senior, Microbiologist Department Quality Control Reports to Manager, Quality Control Microbiology FLSA (Exempt or Non-Exempt Exempt Role Overview The Senior Microbiologist performs compendial, published / customer provided methods and rapid microbial methods (using Biolumix / Soleris systems) for enumeration testing of finished products and raw materials. Also, create & execute the validation and suitability protocols for developed methods as per USP & ISO guidelines so that methods can be used for routine analysis in microbiology lab. The duties and responsibilities described for each level are not limited to those outlined and are not intended to be a comprehensive list of all activities, functions, or responsibilities required of the position. Management reserves the right to modify, assign, or reassign duties and responsibilities at any time based on business needs. Areas of Responsibility • Under the supervision of Quality Control Microbiology Manager and Lead Microbiologist, carry out activities in support of developing new methods for enumeration of probiotic strains, methods suitability of dietary supplement products using rapid and conventional techniques., • Creation of method validation/verification protocol for new methods for enumeration and contaminants estimation., • Perform USP water sampling and testing using rapid micro technology & USP methodology., • Perform identification of microorganisms as per USP general chapters / AOAC published method., • Perform enumeration, non-lactic bacteria and microbial contaminants testing in the raw materials, finished products and stability samples, for routine samples., • Media preparation & Growth promotion testing to be performed for new method development / verification., • Maintain notebooks & lab records within GMP standards and as per USPL SOPs & guidelines. Accurately report results and provide detailed records of results and conclusions., • Assist in creating protocol for Soleris rapid micro system method suitability., • Assist other microbiologists, as necessary, for timely project completion and support other lab personnel as required., • Comply with Health, Safety and Environmental responsibilities for the position., • Train newly joined microbiologist to perform testing for enumerations of probiotics and to perform routine tests for TAC, YM, pathogens using rapid microbial techniques of Neogen Soleris system and USP conventional methods., • ATCC Culture identification and population verifications., • Performs transactions for sample entry and results recording., • Follow all the USPL SOPs to work in the microbiology lab, including gowning, safety, waste disposal of Biohazard materials, and general written guidelines., • Recognizes OOS or out of-trend and, under the direction of QC management, assists in lab investigations., • Documentation of generated microbial lab related data as per GDP and recovery of stored documents within stipulated time during GMP audits or requested by customer., • Complies with all regulatory/ in-house requirements (may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP, GLP, and documentation) when performing the assigned activity., • Must be able to work extended hours as needed and occasional weekends., • Other duties and responsibilities as assigned by QC management. Other Responsibilities Including Safety: • Works in a safe and responsible manner to create an injury-free and incident-free workplace., • Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems. Requirements Education & Qualification: • MS in Microbiology or microbiology related scientific disciplines., • 5+ years in microbiology laboratory techniques, • Minimum of 5 years QC lab work experience with industry experience in dietary supplements, food, or OTC manufacturing. Certifications, Licenses, Credentials: • N/A Skills & Ability • Ability to maintain integrity and honesty at all times and to communicate with transparency., • Ability to work independently or as part of a team., • Solid understanding of cGMP’s and GLP and is familiar with 21 CFR Part 11, • Strong working knowledge of Microsoft Word, Excel., • Good documentation practice and able to write simple, clear reports., • Meets commitments on time and practices time-management skills., • Seeks to identify continuous improvement needs., • Experience with rapid microbial testing procedures is an advantage. Physical Requirements (lifting, etc.): • Ability to navigate office, lab, and/or plant floor working environments., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances and leaning over equipment as well as kneeling on the floor to clean under the equipment., • Must be able to wear all PPE including a lab coat, face mask, booties, gloves, safety glasses/goggles, and respirators., • On occasion may need to lift up to 20lbs. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a laboratory environment where temperatures can be moderate, exposure to dust, odors, noise, and fumes. The noise level is usually moderate. Employees can be exposed daily to chemicals and cleaning agents., • May execute up to 20% of their work at the bench level either standing or sitting on a stool., • Work performed in a standard office environment is without unpleasant or hazardous conditions. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including: medical, dental, vision, short and long term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Measurement and Verification (M&V) to join our team. The Energy Engineer (Measurement and Verification, or M&V) will plan and execute M&V activities to quantify energy and demand savings for retrofit projects, utility incentive programs, and Energy Savings Performance Contracts (ESPCs). This role focuses on rigorous, defensible savings calculations in accordance with IPMVP and program-specific protocols. Responsibilities • Develop M&V Plans: Author project-specific M&V plans following IPMVP Options A, B, C, and D, tailored to project scope, savings magnitude, and program requirements., • Establish Baselines: Collect, clean, and analyze pre-retrofit utility bill data, sub-metered data, BAS trends, and operating schedules to develop defensible baseline models., • Specify and Oversee Metering: Identify required metering points, specify and source data loggers and meters, coordinate installation, and validate incoming data streams for quality., • Perform Post-Installation Verification: Conduct site visits and spot measurements to verify equipment installation, operating conditions, and as-found schedules; document any commissioning or operational issues affecting savings., • Calculate Verified Savings: Build regression models (whole-building, hour-of-week, change-point) and engineering calculations to quantify energy, demand, and cost savings, including weather normalization where applicable., • Author M&V Reports: Produce baseline reports, savings reports, and annual reconciliation reports for clients, utilities, and program administrators; clearly communicate methodology, assumptions, and uncertainty., • Support Utility Incentive and ESPC Programs: Prepare incentive application packages, respond to program reviewer comments, and support performance guarantees on ESPC projects., • Data Analysis and Tooling: Use Excel, Python, R, or other tools to process large utility and interval datasets; apply statistical techniques such as regression, residual analysis, and outlier detection. Requirements • Bachelor's in Engineering (Mechanical, Electrical, Industrial, or Facilities) or related quantitative degree, • 1-3 years of experience in M&V, energy analytics, utility program implementation, or energy engineering, including at least one internship, co-op, or full-time role, • Working knowledge of IPMVP, ASHRAE Guideline 14, and FEMP M&V Guidelines, • Experience with regression analysis and weather normalization (e.g., NMECR, CalTRACK, ECAM, or equivalent methods), • Strong Excel skills required; experience with Python, R, or SQL preferred, • Understanding of HVAC, lighting, controls, and renewable systems, • Familiarity with utility tariffs, interval data formats (Green Button, ESPI), and BAS trend extraction, • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CMVP, or CEM credential preferred (or willingness to obtain within first year), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job DescriptionDescriptionOccupational Therapist Location: East Brunswick, NJ Entity: Alliance Orthopedics Reports To: Clinical Director As an Occupational Therapist, you provide direct patient care working side-by-side with our conservative care team of chiropractors, physical therapists, athletic trainers, exercise physiologists, and more! Our Occupational Therapists are an integral part of our sports medicine team, and function additionally as liaisons to our medical doctors, orthopedic surgeons, functional medicine practitioners, and pain management physicians. You will bring a unique role and perspective to the rehab floor of our practice. Not every OT is looking for a traditional position, and that's why Alliance Orthopedics provides OT’s the opportunity and resources to utilize their full scope of practice within our clinic-based model! Alliance Orthopedics Alliance Orthopedics is a multidisciplinary healthcare organization dedicated to helping patients get back to the activities they love. Our integrated team of medical providers, orthopedic specialists, physical therapists, occupational therapists, chiropractors, athletic trainers, and rehabilitation professionals work together to create a seamless patient experience and deliver exceptional outcomes. What sets Alliance Orthopedics apart is our collaborative approach. Medical and conservative care teams work hand in hand to eliminate barriers, improve communication, and collapse recovery timelines. If you are passionate about function and independence, thrive in a collaborative environment, and are committed to becoming Better Every Day, Alliance Orthopedics offers an opportunity to grow your career while making a lasting impact on the lives of others. Summary of Responsibilities & BenefitsBenefits: • Collaborative environment fostering continued growth in a multidisciplinary approach to medicine, • New Hire Mentorship Program, • VERY competitive salary and a runway to $115K based on performance, • Accrued paid time off, sick time, and six paid company holidays, • Annual CEU reimbursement budget for your continued clinical development, • Tuition Reimbursement (terms apply), • 401(k) matching, • Retirement savings account with a percentage-based company match, • Full paid Health Insurance - Health insurance, Dental insurance, Vision insurance, • Long and Short Term Disability, • Cancer Care coverage, • Mental Healthcare Benefits, • Life Insurance What You'll Do:, • Build genuine patient relationships, understand their goals, not just their diagnosis, • Deliver engaging one-on-one evaluations where patients feel heard, • Design and execute individualized rehab and fitness-oriented programs to help patients regain lost skills, • Collaborate directly with MDs, surgeons, and specialists for advanced care, • Serve as a liaison between the rehab floor and our medical and surgical teams, • Maintain timely, accurate documentation in our EMR system, • Prepare patients confidently for return to work, sport, school, and life, • Educate caregivers and/or family members of patients on patient needs, • Maintain professional knowledge and technical progress in order to provide clients with the best treatment program available, • Evaluate patient condition regarding physical and basic mental health, • Comply with company rules, regulations, and procedures, • Support marketing initiatives by attending marketing and outreach events as requested, • Bring energy, this clinic has a culture, and you'll be part of setting it, • Stand out as a valuable team member in collaboration with all other healthcare disciplines in a team setting to help our patients get BETTER EVERYDAY! Who We're Looking For:, • Ensure an outstanding patient experience by becoming part of our fun, energetic, high octane, and motivating clinic atmosphere!, • Evaluate patient condition regarding physical and basic mental health, • Build rapport and relationships with our patients! Understand THEIR GOALS!, • Provide engaging one-on-one care with patients, allowing them to feel heard during evaluations, • Advise on adaptive equipment to help clients with daily activities, • Develop physical rehabilitation programs to help clients regain lost skills, • Prepare clients for return for work, school, home, etc., • Fabricate custom orthosis for various both post operative and conservative hand and wrist injuries, • Collaborate with a dynamic healthcare team to facilitate comprehensive patient care, working closely with referring physicians for injections, x-rays, MRIs and other diagnostic procedures, • Educate caregivers and/or family members of patients on patient needs, • Support marketing initiatives by attending marketing and outreach events as requested, • Flexible schedule to accommodate clinic evening hours as needed and/or required, • Act as a liaison between patients and referring physicians, ensuring clear communication and smooth transitions for diagnostic tests and procedures, • Stand out as a valuable team member, bringing energy in collaboration with all other healthcare disciplines in a team setting to help our patients get BETTER EVERYDAY!, • Comply with company rules, regulations, and procedures Requirements: • Degree in Occupational Therapy from an education program accredited by ACOTE or AOTA, • Certified by the National Board for Certification, • Valid New Jersey License REQUIRED, • Possess up-to-date knowledge of treatment practices and occupational therapy programs, • Excellent interpersonal, organizational, and customer service skills, especially the ability to show compassion for patients coming from all walks of life, • Familiarity with electronic medical record systems, • Willingness to challenge patients, other team members, and yourself! Alliance Orthopedics is the region's most dynamic multidisciplinary orthopedic practice with nine clinic locations across New Jersey., • Bloomfield, • Fair Lawn, • Union, • Randolph, • East Brunswick, • Middletown, • Freehold, • Old Bridge, • Toms River Job Type:, • Full-time, on-site, • One location, • Exempt Background Check Requirement: Employment is contingent upon the successful completion of a background check, which may include verification of employment history, education, criminal records, and other relevant information as permitted by law.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Building Commissioning to join our team. The Energy Engineer (Commissioning) will support and execute new construction commissioning (Cx) and retro-commissioning (RCx) projects across a portfolio of commercial, institutional, and multi-family buildings. This role focuses on verifying that building systems are designed, installed, tested, and operated to meet the Owner's Project Requirements and applicable code, certification, and performance criteria. Responsibilities • Develop Commissioning Documentation: Author commissioning plans, Owner's Project Requirements (OPR) summaries, Basis of Design (BOD) reviews, issues logs, and final commissioning reports., • Perform Design and Submittal Reviews: Review drawings, specifications, sequences of operation, and contractor submittals to identify deficiencies, design intent gaps, and commissioning impact items., • Create Pre-Functional and Functional Checklists: Develop equipment-specific Pre-Functional Checklists (PFCs) and Functional Performance Test (FPT) scripts for HVAC, plumbing, electrical, controls, and life safety systems., • Conduct Site Visits and Construction Observation: Perform installation verification site visits, document open issues, and coordinate with general contractors, mechanical/electrical contractors, controls vendors, and TAB agents., • Execute Functional Performance Testing: Lead and witness FPTs of air-side, water-side, BAS, lighting controls, and emergency power systems; verify sequences of operation and proper system response., • Support Retro-Commissioning Studies: Conduct onsite performance testing of existing building systems, identify Retro-Commissioning Measures, and quantify low- and no-cost operational savings., • Develop Systems Manuals and Training: Compile systems manuals and assist with O&M training to support owner handoff., • Support Certification and Compliance: Support LEED Fundamental and Enhanced Commissioning, ASHRAE Guideline 0/1.1/1.5, and project-specific certification requirements. Requirements • Bachelor's in Engineering (Mechanical, Electrical, or Facilities), • 1-3 years of experience in commissioning, MEP design, construction, or energy engineering, including at least one internship, co-op, or full-time role, • Working understanding of HVAC equipment (AHUs, chillers, boilers, VRF, VAV, terminal units), BAS sequences of operation, and basic electrical systems, • Familiarity with construction documents, specifications (CSI MasterFormat), and submittal review, • Exposure to LEED commissioning requirements and/or ASHRAE Guideline 0 preferred, • Comfortable working onsite in active construction environments (PPE required), • Proficient in Microsoft Office and PDF markup tools (Bluebeam, Adobe), • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, CxA, BCxP, or LEED AP credential preferred (or willingness to obtain), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job Description Company Overview Tri-State Energy (TSE) is an energy efficiency consulting and implementation contracting firm with a 40-year history in customer service and energy cost saving delivery. Regionally, TSE delivers Direct Install Programs, Engineered Solutions Programs, Energy Savings Improvement Programs, and Engineering Services for Municipal, Commercial and Industrial Clients. TSE is consistently recognized and awarded for being a small business champion that marries innovative technology with small company personalization and service. We are growing and looking to hire dedicated, industry-qualified candidates at all experience levels to grow with our company. We are seeking to hire an experienced Lead Energy Engineer in our Woodbridge, N.J. office, with 5+ years' experience in the energy sector, strong technical competency, and the ability to lead projects from auditing through implementation. Essential Job Functions • Lead and execute ASHRAE Level I-III energy audits., • Conduct onsite inspections, data collection and measurement and verification., • Develop detailed engineering analyses and ECM calculations., • Provide design support and review technical drawings., • Coordinate project activities with clients and contractors., • Prepare technical reports, proposals and documentations., • Mentor junior engineers for growth and development. Qualifications • Bachelors or Master's degree in relevant engineering field., • Certified Energy Manager (CEM) is required., • Strong knowledge of building mechanical, electrical, and controls systems and energy codes., • Must reside in New Jersey., • Valid New Jersey Driver's License is required., • PE desired or in progress. Physical Abilities The physical demands described here represent those that an employee must meet to perform the essential functions of this job successfully. • While performing the duties of this job, the employee is occasionally required to stand; sit, walk, climb, balance, stoop, kneel, crouch or crawl; use hands to finger, grasp, or feel objects; reach with hands and arms; push or pull; talk and hear; use repetitive motions., • The employee is frequently required to lift and/or move up to 20 pounds and occasionally lift and/or move up to 25 pounds., • The employee must have visual acuity to perform activities such as preparing and analyzing data and figures, transcribing, viewing a computer terminal, and extensive reading and visual inspections of site plans. Work Environment While performing the duties of this job, the employee is subject to the following work environment: • The employee is subject to both inside and outside environmental conditions., • The employee is subject to hazards such as proximity to moving mechanical parts, moving vehicles, and electrical current. Screening TSE makes offers of employment contingent upon (1) successful completion of a routine background investigation and reference check, (2) drug testing, and (3) Act 34 Child Abuse clearance. Equal Employment Opportunity (EEO) TSE is an equal-opportunity employer committed to diversity and inclusion in the workplace. TSE prohibits discrimination and harassment of any kind based on age, race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, age, marital status, gender, gender identity or expression, veteran status, or any other protected characteristic as outlined by federal, state, or local laws. TSE is a drug-free workplace. Why work for us? • Medical, vision, dental insurance and more, including 401(k) and employer match.

Job DescriptionTITLE: HR MANAGERLOCATION: EDISON, NJ The Human Resources Manager is responsible for managing all aspects of the employment lifecycle of Company X’s plant full-time, year-round staff and seasonal employees. Hours are 6am -3:30pm and some Saturday mornings may be required as needed. Responsibilities include: Employee Relations • Address and resolve employee issues in correlation to Company Policy and Procedures, • Liaise with legal counsel to discuss HR-related issues, as needed, • Handle discipline and termination of employees in accordance with company policy., • Ensure compliance with State and Federal Employment lawRecruitment & Training, • Manage the hiring process, including advertising open positions, reviewing resumes, coordinating and conducting interviews, creating offer letters, reference and background checks, • Managing the on-boarding process for new employees, • Train new and temporary hires on GMP; conduct annual HR Trainings as needed HR Administration, • Create and maintain personnel and benefits files ensuring security and confidentiality, • Administer employee benefits; Manage all aspects of annual open enrollment for health benefits., • Administer employee health, retirement plans, which include 401K retirement plan, medical/dental insurance, short and long-term disability insurance, workers compensation, leaves of absence., • Provides resolution of human resources, compensation, and benefit questions, concerns, and issues., • Enforce established payroll related policies and procedures., • Ensure compliance with employment laws, benefits, insurance, safety, and other laws, regulations, and requirements, • Complete and submit paperwork to external agencies for compensation claims, unemployment claims, verification of employment and more Oversee the annual employee review process; Maintain employee performance documentation, • Track temporary and regular employee attendance sheets with supervisors., • Place orders for temporary employees and verify their attendance, • Maintain OSHA files, • Secure and administer I-9 forms for all employees, • Performs other related duties as assigned. Qualifications:, • Highly detail-oriented, able to work independently, multi-task, enjoy interfacing with other staff at all levels, excellent skills in verbal and written communication,, • Bachelor’s degree in human resource management, business, communications or other related discipline, • Familiarity with NJ State and Federal labor laws,, • 5 years of Manufacturing HR Experience, • Proficient with Microsoft Office Suite or related software., • Current human resources and/or compensation credentials or certification preferred. Physical Requirements: Prolonged periods of sitting at a desk and working on a computer. Must be able to lift up to 25 pounds at times, walk unassisted in a plant environment recognizing GMP and hygiene standards.

Job Description Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customer’s products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along the distribution process. HOW YOU WILL CONTRIBUTE (Overview & Key Responsibilities): Our Quality Control (QC) Inspector performs incoming work in process and final inspection on raw materials as well as on finished goods to ensure that products are at the highest quality before they reach the customers. • Identify any non-conformance materials or products and verify they are inspected and released according to specification., • Count, measure incoming or outgoing items to compare identifying information and variety against specifications, bills of ladings, packing lists or other records., • Read and understand quality control specifications, inspect, evaluate and record data of incoming raw material, work in process and finished goods inspection., • Ensure that all equipment used to conduct quality checks must be calibrated., • Identify changes to specifications and paperwork requirements, sampling plans and test methodology to identify eliminate potentially unsafe conditions and communicate the need for corrective action on materials, process, or product problems to the appropriate manufacturing and QC personnel., • Record inspection results, receiving, work in process and final inspection information on the appropriate forms, file paperwork according to documentation and filing requirements., • Report any defects or problems with materials or products to the appropriate manufacturing and QC personnel to implement corrective and preventive actions., • Operate material handling equipment such as forklifts, pallet jacking and hand trucks to move materials., • Participate in various project assignments and other special activities as assigned. WHAT YOU NEED TO SUCCEED (Minimum Qualifications): • High School diploma or equivalent, • 2+ years of quality control experience in a manufacturing environment, • Must be bilingual (English & Spanish), • Proficient in MS Office WHAT WILL SET YOU APART (Competencies): • Proficient knowledge of safety practices and quality systems. Ability to read, understand and apply technical documentation such as SOP’s, GMP’s & Test Methods., • Capable of working efficiently both on a team and independently, • Excellent verbal and written communication skills., • Analytical and detail oriented., • Mechanically inclined. Skilled in operating handheld measurement devices., • Valid forklift certification (optional) and ability to lift 50 lbs. or more WHY JOIN US: At Cryopak, we strive to offer a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Basic Life and AD&D / Voluntary Life and AD&D, • Short-Term Disability, • Long-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Description Job Description Date 2026 Location 1300 Airport Rd, North Brunswick NJ Title Associate Director, Quality Assurance Compliance Department Quality Assurance Reports to Vice President, Quality Assurance FLSA (Exempt or Non-Exempt Exempt Role Overview The Associate Director of Quality Assurance Compliance is responsible for developing, maintaining, and continuously strengthening Quality Compliance programs, QA procedures, GMP and GLP compliance, regulatory inspection readiness, product testing support, quality planning, and continuous improvement initiatives. This role provides leadership and direction to the QA team while driving practical upgrades to GMP practices, procedures, documentation standards, and inspection readiness across the organization. Areas of Responsibility • Develop and maintain GXP required Standard Operating Procedures (SOPs) and other required documents in line with industry and regulatory requirements. Author and/or approve required SOPs ensuring control of GXP operations and activities., • Assist in / or perform periodic reviews of all established programs including Vendor qualification Management, Quality Agreements, Annual Quality Management Reviews, and in the performance of internal audits of quality-controlled activities as executed by other departments., • Management and preparation, review and /or approval of customer specifications and other related technical documents as per customer requirements per Product Development direction, • Management of product specifications, COAs, SDS, review of product label and supplement facts, • Review and/or approval of Food Safety Plan, Validation, Verification protocols, reports, and other quality related documents., • Oversee the day -to-day activities of the quality assurance team in line with industry and regulatory requirements, provide GMP training, mentoring and performance management., • Provide assistance to Quality management during audits performed by external groups, customers and regulatory agencies. Develop action plans to resolve documented observations and ensure adequate resolutions are achieved., • Lead Quality Compliance initiatives to meet current GMP expectations and proactively upgrade GMP practices, procedures, documentation, training, and inspection readiness systems to support sustainable compliance and operational excellence., • Own preparation, hosting, coordination, response management, and follow-up for external third-party audits including GMP, Kosher, Halal, Organic, customer audits, and regulatory inspections or audits by agencies such as State authorities, FDA, TGA, and other applicable regulatory bodies., • Manage internal and external audits, ensuring that findings are addressed, and corrective actions are implemented in a timely manner., • Document, resolve or provide assistance to other groups with Corrective Actions, Deviations, Non- Conformance, Customer Complaints and Change Controls., • Approve actions as necessary and monitor for effectiveness and timeliness of completion., • Assures the implementation of GMP procedures throughout the company., • Collaborate with cross – functional teams including production, engineering, supply chain and customer service, to identify and resolve quality issues., • Develop and implement quality metrics and KPI’s, regularly report on performance to management., • To perform any other tasks as given by the management Requirements/Preferred Education & Qualification: • Bachelor’s Degree or higher in science or related scientific disciplines, • About 10-12 years of relevant work experience in the dietary supplement, nutraceutical, food, pharmaceutical, or biotech industry, with strong preference for hands-on Quality Assurance and Quality Compliance experience in a Dietary Supplement GMP manufacturing or CDMO environment., • Or equivalent combination of education and experience Certifications, Licenses, Credentials: • PCQI certification is required. Certifications in auditing, FSMA, HACCP, or other applicable quality and food safety programs are preferred. Skills & Ability • Strong knowledge of Dietary Supplement GMP requirements and compliance expectations, including 21 CFR Part 111, 21 CFR Part 117, GLP principles, and applicable electronic records expectations such as 21 CFR Part 11., • Experience in preparation of compliance documents for product approval by customer, transition from product development / R&D stage to commercial quality systems and operations as per product specification & quality requirements., • Hands-on experience with implementing and managing Quality Compliance systems and processes, experience in handling internal and external audits., • Demonstrated ability to lead audit readiness programs, manage external third-party and regulatory audits, prepare effective audit responses, drive CAPA completion, and use audit outcomes to improve GMP systems and procedures., • Strong leadership and interpersonal skills, problem solving skills, verbal, and written communication skills, with the ability to identify and resolve quality issues. Physical Requirement • The employee is frequently required to sit (50%), stand, and walk (50%). Uses hands to finger, handle or feel writing tools and computer keyboard. May reach with hands and arms and infrequently may lift up to 30lbs. Use desk telephone/cell phone to talk and hear or converse with other employees. Work Environment (Office, Warehouse, temperature extremes, etc.): • Primarily located in an office environment where temperatures are controlled for heat and air conditioning; occasionally walks through warehouse or manufacturing workplace and will be required to wear appropriate PPE for each work area including safety shoes, hair net, safety glasses, face mask, gloves, or disposable jumpsuit. The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all the job responsibilities, duties, skill, or working conditions. In addition, this document does not create an employment contract, implied or otherwise, other than an "at will" relationship. USPL is proud to be an Equal Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy), sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status, or any other characteristic protected by applicable local, state, or federal law. Benefits And Compensation: Our benefits are designed to help you move forward in your career, and in areas of your life outside of USPL. From health and wellness benefit options including medical, dental, vision, short- and long-term disability, basic life insurance, supplemental life insurance, AD&D insurance. We also offer a matched 401(k) savings plan. Employees have the opportunity to receive compensation in the form of premium pay such as overtime, shift differential, holiday pay, sick time, etc. Newly hired employees receive up to 10 days of vacation in the first year, which grows to 12 days starting the second year of employment. Job Description Acknowledgement I have read and understand the job requirements, responsibilities, and expectations set forth in the job description provided for my position. I attest that I can perform the essential job functions as outlined with or without any reasonable accommodation.

Job DescriptionCompany Description Global supply chain management is what we do, and at the heart of Expeditors you will find professionalism, leadership, and a friendly environment, all of which foster an innovative, customer service-based approach to logistics. Expeditors is a global logistics company headquartered in Seattle, Washington. As a Fortune 500 company, we employ over 19,000 trained professionals in a worldwide network of over 350+ locations across six continents. Expeditors satisfies the increasingly sophisticated needs of international trade through customized solutions and seamless, integrated information systems. Our Mission is to recruit, train, and retain the very best logistics and technical experts the world over. We love to promote from within - more than 50 percent of our employees have been at Expeditors for five years or more. Our high retention rate is influenced by a unique compensation program for positions that are more than just jobs - they're chances to grow, do what you love and build a career with us! Job Description Duties and Responsibilities • Ensure smooth and timely customs process flow, • Ensure accurate and timely data entry into our operational system, • Track and Trace Custom files and reporting, • Ensure accurate and timely client billing, • Understand all the elements of the import and export customs Desk Level Operating Procedure and correctly interpret this information to fulfill our customer´s instructions and expectations., • Transfer customs declaration information from documents, or other sources into the customs entry system to allow for the build of a valid customs declaration, • Assist with verification of customs declaration information and the submission of such to the customs authority, • Ensure compliance at all times to regulations Support the department in the following areas: • Daily execution of workflow and department metrics., • Build and maintain strong relationships with customers and governmental Customs organizations., • Timely completion of items on learning plan(s) and Personal development plan. Systems: • Embrace and utilize productivity tools, • Be open to implementing new system changes and enhancements., • Be involved and suggest system/process improvements. Culture: • Consistently display and promote the company’s 10 cultural attributes: Appearance, Attitude, Confidence, Curiosity, Excellence, Integrity, Pride, Resolute, Sense of Humor, and Visionary. Qualifications • Bachelor's degree, • Professional oral and written communication skills in English, • Demonstrate exceptional customer service skills, • Organizational skills, • Needs analysis skills, • Problem solving skills, • Strong Microsoft Office skills (Word, Excel etc.) Additional Information Expeditors offers excellent benefits: • Paid Vacation, Holiday, Sick Time, • Health Plan: Medical, • Life Insurance, • Employee Stock Purchase Plan, • Training and Personnel Development Program, • Growth opportunities within the company, • Employee Referral Program Bonus, • Salary range: $48,000 - $51,000

Job Description Fortegra is building AI-enabled systems for commercial insurance. Our document-intelligence software processes emails, scanned PDFs, policy packets, loss runs, and spreadsheets with inconsistent layouts. It identifies what was received, extracts and reconciles relevant facts, preserves links to the source, and presents the results for review and action. Current work includes underwriting submission triage and audits of issued policy packets. Reliability is central to this work. A field can look plausible and still be wrong. A parser can misread a page without raising an error, or a workflow can omit a document entirely. We need to find those failures, understand their impact, and keep the system dependable as document formats, models, prompts, and parsing tools change. We're hiring an engineer to build and improve these production systems. You'll work closely with the technical lead for applied AI on architecture, data representation, and model choices. You'll take bounded features from a business question or production failure through planning, implementation, evaluation, and production readiness. You'll surface decisions that need broader input, and take responsibility for larger features and workflows as you learn the system and domain. WHAT YOU'LL WORK ON • Build applied-AI product features. Work across document parsing and OCR, classification and routing, structured extraction, normalization and reconciliation, source grounding, retrieval and summarization, and the deterministic logic around them. Most candidates will bring depth in some of these areas and an interest in working across their boundaries., • Drive the evaluation loop. Inspect real documents, traces, and model behavior; maintain representative evaluation sets; classify failures; choose the next change from the evidence; and requalify the result. Outputs must be complete, support material claims with source evidence, and reconcile related values., • Shape features with domain experts. Work with underwriters, auditors, claims professionals, and other specialists to clarify definitions, exceptions, source authority, and acceptance criteria. Turn those decisions into schemas, examples, validation rules, and product behavior., • Compare and choose technical approaches. Test models, OCR and parsing tools, managed services, and internal implementations against the same representative documents. Recommend an approach based on quality, cost, latency, reproducibility, failure modes, and operational overhead. Build for the current problem, then reuse patterns that prove durable., • The day-to-day work is production engineering: building features, debugging strange behavior, reviewing code, improving tests and observability, and operating services in a Python and Azure Functions codebase. EARLY PRIORITIES In your first months, you'll improve one existing capability through evaluation and requalification; ship a bounded document-intelligence feature; and complete a model, parser, or service comparison with the tests, artifacts, and handoff needed to continue it. Your scope will grow as you learn the system and domain and demonstrate sound judgment. HOW WE WORK • Choose the tool based on the problem. Use deterministic code for stable rules and LLMs for variable interpretation. Tests, evaluations, and production evidence support release decisions., • Work effectively with coding agents. Claude Code, OpenAI Codex, Cursor, and similar tools are part of daily development. Give agents useful context and verifiers, choose how much autonomy to grant, and remain responsible for architecture, review, testing, and what gets merged., • Follow failures through the system. A defect may involve documents, prompts, model behavior, application logic, and product expectations. We investigate across those boundaries and preserve concise plans, findings, and handoffs. WHAT WE'RE LOOKING FOR • Production software engineering. You've built and shipped Python services or product features and can reason about testing, observability, reliability, security, cost, and latency., • Applied-AI judgment. You understand common LLM failure modes and how context, data quality, evaluation design, and model or API choices affect results. You've worked hands-on with structured outputs, tool calling, context design, or retrieval., • Evidence-based debugging. You inspect source artifacts, traces, ground truth, evaluation sets, structured error analysis, tests, and production evidence to determine what happened and whether a change helped. Come ready to walk us through one example., • Ability to shape incomplete work with domain experts. You can turn an underspecified problem into a plan, learn what its fields and rules mean, make progress, and identify decisions that need broader input., • Practical technical judgment. You can choose among deterministic code, schemas, rules, search, product changes, and LLMs based on the problem., • Responsible use of coding agents. You can delegate implementation, provide context and verification, choose an appropriate level of autonomy, and review, test, and correct the result. Experience with our exact tools is optional., • Nice to have: document processing, OCR, information extraction, retrieval, or search experience; insurance or another regulated, document-intensive domain; Azure, serverless, or distributed processing; evidence, provenance, citation, or human-review systems., • This production-software role focuses on dependable outputs and real failures. Model-training research and notebook-based analytics are outside its day-to-day scope. Salary Range$140,000 – $170,000 base salary, commensurate with experience. Additional Information: Full benefit package including medical, dental, life, vision, company paid short/long term disability, 401(k), tuition assistance and more Job Posting Disclaimer: Fortegra has recently been made aware of unauthorized communications regarding career opportunities by individuals not associated with Fortegra or our recruitment team. Fortegra will only contact you from the Fortegra domain address (@fortegra.com). If you receive a message from someone posing as a Fortegra recruiter via text message, WhatsApp, Telegram or other messaging platform, please report it as phishing and block the sender. Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or assume sponsorship of employment visas now or in the future. We welcome applicants of all backgrounds and national origins. Fortegra is not accepting unsolicited resumes from search firms for this position. Internal Notice: As part of our commitment to talent development, this position is open for internal promotion applications at the time of public posting. #LI-Onsite

Job Description SportsMed Physical Therapy is a leading Physical Therapy Practice in Northern New Jersey and we are seeking a Patient Coordinator to join our growing team. Our facilities feature state of the art equipment focused on outpatient sports medicine and orthopedic conditions. Our mission is to make each of our therapy centers a patient friendly and welcoming environment to all clients and visitors. As a member of the SportsMed team, you will be integral in helping us achieve this goal. If you are driven and motivated, with an outgoing and customer focused personality, we would be happy to welcome you to our team. The position: The Patient Coordinator will assist the patients and visitors that enter our Physical Therapy Centers. This person will be responsible for handling the daily tasks of our front desk operations. This includes scheduling/rescheduling appointments, communicating with insurance companies to obtain benefit verification and authorization, and ensuring data is entered in an accurate and timely manner. This person also supports the team by striving to meet and exceed office goals. The Patient Coordinator is a key position allowing the right person great growth opportunities with SportsMed Physical Therapy. Bring your outstanding commitment to customer service and come grow with us! You will • Welcome patients and visitors, in person, or on the telephone, and answering or referring inquiries., • Optimize patient satisfaction, provider time, and treatment room utilization by scheduling appointments in person or by telephone., • Complete insurance verifications, • Ensure availability of treatment information by filing and retrieving patient records., • Keep patient appointments on schedule by notifying provider of patient's arrival; reviewing service delivery compared to schedule; reminding provider of service delays., • Maintain patient accounts by obtaining, recording, and updating personal and financial information., • Obtain revenue by recording and updating financial information; recording and collecting patient charges; controlling credit extended to patients; filing, collecting, and expediting third-party claims., • Protect patients' rights by maintaining confidentiality of personal and financial information., • Maintain operations by following policies and procedures; reporting needed changes., • Contribute to team effort by accomplishing related results as needed.You will bring, • An ability to work in a fast-paced environment, • Multitasking skills, • Flexibility, • Professional Telephone skills, • Excellent customer service skills, • Superior Time Management, • Organization skills, • Attention to detail, • Computer skills (EMR Systems, Microsoft Excel, Microsoft Outlook), • Focus on quality, • Professionalism, • Experience working in a Physical therapy environment, medical office, or hospitality background with a strong emphasis on customer service, • Bilingual Spanish PreferredWhat we offer, • Excellent career growth opportunity, • Competitive pay based on experience and added value, • Medical benefits, life and disability insurance, PTO, sick time, paid holidays, • 401k with 4-8% Match based on tenure, • Pay Range $20.00 - $24.00 per hour #IND3

Job Description Join BoldAge PACE and Make a Difference! Why work with us? • A People First Environment: We make what is important to those we serve important to us., • Make an Impact: Enhance the quality of life for seniors., • Professional Growth: Access to training and career development. Competitive Compensation: • Medical/Dental, • Generous Paid Time Off, • 401K with Match*, • Life Insurance, • Tuition Reimbursement, • Flexible Spending Account, • Employee Assistance Program BE PART OF OUR MISSION! Are you passionate about helping older adults live meaningful, independent lives at home with grace and dignity? BoldAge PACE is an all-inclusive program of care, personalized to meet the individual health and well-being needs of our participants. Our approach is simple: We listen to our participants and their caregivers to truly understand their needs and desires. HUMAN RESOURCES MANAGER ESSENTIAL DUTIES AND RESPONSIBILITIES: • Demonstrate the highest level of integrity, professionalism, and ethical judgment while maintaining strict confidentiality of sensitive employee, business, and organizational information. Build trust through impartial decision-making, safeguard confidential information in accordance with Company policy and applicable laws, and serve as a credible, objective Human Resources partner who consistently models BoldAge's Core Values in all interactions and decisions., • Partner with the Executive Director and leadership team to develop and execute people strategies that support employee engagement, retention, workforce planning, and organizational effectiveness., • Serve as the onsite HR point of contact for employees and managers, providing guidance on HR policies and procedures while escalating complex matters to the national HR team and HR leadership., • Support recruiting activities in partnership with the recruiting team, including , coordinating interview schedules with hiring managers, facilitating candidate center visits, and assisting with local candidate communications., • Prepare and distribute new hire packets, conduct onboarding sessions, and ensure compliance with California-specific new hire notices, I-9 verification, and timely completion of all new hire documents., • Partner with managers and the national HR team to facilitate a smooth new hire orientation and first-day experience., • Coordinate employee equipment needs, including issuing laptops, ID badges, access cards, uniforms, or phones(if applicable), ensuring proper documentation, return, and tracking in partnership with IT and Facilities., • Maintain HR records and personnel files in compliance with the applicable state laws (i.e., CA Privacy Rights Act (CPRA) and organizational standards., • Support employee status changes in HRIS system, transfers, and terminations, ensuring timely processing of paperwork and final pay requirements under California law. Ensure required approval has been obtained prior to processing., • Assist with tracking and coordination of employee leaves of absence, including CFRA, PDL, Paid Sick Leave, and Pregnancy Disability Leave, in collaboration with the national HR team., • Research, monitor, and remain current on federal, state, and local employment law changes related to pay, benefits, leave, and wage and hour compliance, ensuring organizational policies and practices remain compliant., • Provide onsite support for compliance with state labor laws, including rest/meal breaks, overtime rules, required postings, and workplace safety requirements., • Coordinate local logistics for required state trainings, such as Anti-Harrassment, Code of Conduct and Workplace Violence, and maintain accurate records., • Ensure final pay is processed in accordance with the employee's termination type and applicable state-specific requirements to maintain compliance with all federal, state, and local wage payment laws., • Partner with payroll and the center leadership team to ensure accurate timekeeping and overtime compliance., • Assist with local employee relations matters by documenting concerns, gathering information, and escalating to the national HR team for resolution., • Support HR projects and initiatives rolled out by the centralized HR team, including open enrollment, performance reviews, and policy updates., • Perform other duties and special projects as assigned. EXPERIENCE, EDUCATION AND CERTIFICATIONS: • Bachelor’s degree in Human Resources, Business Administration, or related field., • Minimum 5years of progressive Human Resources experience., • Minimum 3 years independently managing employee relations matters, including workplace investigations, performance management, and corrective action., • Strong working knowledge of State specific employment laws laws, including wage and hour regulations, FEHA, CFRA, Pregnancy Disability Leave, Paid Sick Leave, Workers' Compensation coordination, meal and rest period compliance, I-9 requirements, and final pay requirements., • Experience in supporting healthcare or other highly regulated environments preferred., • Professional HR certification preferred (SHRM-CP, SHRM-SCP, PHR, PHRca, or SPHR). PRE-EMPLOYMENT REQUIREMENTS: • Be medically cleared for communicable diseases and have all immunizations up to date before engaging in direct participant contact., • Pass a comprehensive criminal background check that may include, but is not limited to, federal and state Medicare/Medicaid exclusion lists, criminal history, education verification, license verification, reference check, and drug screen. SKILLS AND ABILITIES: • Demonstrates a “People First” approach in providing responsive and professional HR support to employees and managers., • Applies strong organizational skills and attention to detail to ensure accuracy and compliance, consistently working to “Exceed Expectations.”, • Communicates effectively and “Seeks to Understand” by actively listening, clarifying information, and providing guidance aligned with policies and procedures., • Maintains confidentiality and sound judgment, upholding the responsibility to “Do the Right Thing” in all HR matters., • Exercises initiative and problem-solving skills, with the confidence to “Be Bold” in addressing challenges and supporting organizational goals. TECHNICAL SKILLS: • Proficient in HRIS platforms and Microsoft Office Suite with the ability to manage employee data, reporting, and documentation accurately., • Excellent verbal and written communication. BoldAge PACE provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. • Match begins after one year of employment Full-time Monday - Friday Days

Job Description AHEAD builds platforms for digital business. By weaving together advances in cloud infrastructure, automation and analytics, and software delivery, we help enterprises deliver on the promise of digital transformation. At AHEAD, we prioritize creating a culture of belonging, where all perspectives and voices are represented, valued, respected, and heard. We create spaces to empower everyone to speak up, make change, and drive the culture at AHEAD. We are an equal opportunity employer, and do not discriminate based on an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. We embrace all candidates that will contribute to the diversification and enrichment of ideas and perspectives at AHEAD. AHEAD is seeking an Associate Technical Consultant to join the Storage Delivery Practice and support the implementation and operation of enterprise data center infrastructure. This customer-facing role helps translate business and technical requirements into practical solutions and contributes to delivery activities from planning and preparation through implementation and knowledge transfer. The ideal candidate is detail-oriented, accountable, solutions-focused, and comfortable collaborating with customers and internal teams. Limited travel may be required to support data center deployment projects. Key Responsibilities: • Install data center hardware, including racking, stacking, and cabling, to support enterprise requirements for performance, availability, recoverability, scalability, and operational simplicity., • Apply basic configurations to physical infrastructure, including PowerMax, PowerFlex, PowerEdge servers, Cisco switches, Pure FlashArray, FlashBlade, and related platforms., • Configure and deploy SAN infrastructure, including Cisco and Brocade Fibre Channel switching., • Create and maintain technical documentation, including solution designs, implementation plans, operating procedures, and knowledge-transfer materials., • Serve as a supporting technical point of contact during delivery engagements, status meetings, cutovers, and escalation events., • Collaborate with project managers, architects, account teams, and customer stakeholders to align scope, timelines, and technical outcomes., • Support post-implementation knowledge transfer, issue review, and recommendations for continuous improvement., • Support delivery consistency, technical quality, and customer satisfaction while learning from senior team members and mentors., • Stay current on storage, cloud, and infrastructure trends and contribute practical ideas to improving delivery methods and client environments.Required Qualifications:, • Hands-on experience supporting enterprise infrastructure delivery, preferably in consulting, professional services, or complex customer environments., • Ability to diagnose and resolve connectivity issues across systems, hosts, switches, and related infrastructure., • Strong written, verbal, and technical documentation skills., • Ability to manage competing priorities and work effectively in client-facing delivery environments., • Working knowledge of Linux, Unix, and Windows operating systems., • Familiarity with automation and orchestration concepts, with experience using one or more tools such as Python, Bash, PowerShell, JavaScript, Ansible, Terraform, or Jenkins.Success Profile:, • Owns assigned technical tasks and contributes as a reliable member of the Storage Delivery team., • Delivers high-quality work with strong attention to execution, risk awareness, and customer outcomes., • Builds credibility with customer teams and internal delivery, architecture, and sales stakeholders., • Balances hands-on technical execution with customer service, clear communication, and business awareness., • Demonstrates a growth mindset and a commitment to continually developing technical skills, capabilities, and knowledge., • Commits to obtaining storage certifications that are relevant to the practice and support both individual development and practice success., • Demonstrates a strong desire to grow professionally, advance their technical career, and contribute to the success of the practice.Work Environment: The Associate Technical Consultant works within the Storage Delivery Practice to support project-based delivery for new data center deployments, infrastructure upgrades, and system moves. The role may require after-hours and weekend work based on project schedules or client needs, as well as limited travel for client engagements. Role Summary: This opportunity is ideal for a hands-on storage and server professional who can support enterprise deployments while building trusted relationships with customers, project teams, and internal stakeholders. The compensation range indicated in this posting reflects the On-Target Earnings (“OTE”) for this role, which includes a base salary and any applicable target bonus amount. This OTE range may vary based on the candidate’s relevant experience, qualifications, and geographic location. Why AHEAD: Through our daily work and internal groups like Moving Women AHEAD and RISE AHEAD, we value and benefit from diversity of people, ideas, experience, and everything in between. We fuel growth by stacking our office with top-notch technologies in a multi-million-dollar lab, by encouraging cross department training and development, sponsoring certifications and credentials for continued learning. USA Employment Benefits include: - Medical, Dental, and Vision Insurance - 401(k) - Paid company holidays - Paid time off - Paid parental and caregiver leave - Plus more! See benefits https://www.aheadbenefits.com/ for additional details. Use of AI: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, assessing responses, or to capture recordings and create transcriptions or summaries during interviews. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please refer to the Candidate Privacy Notice or contact us at privacy@ahead.com. You may opt-out of the review or analysis of your application and resume by AI tools by using the General Application. Please include the role you wish to apply for in the Additional Information field. You may also choose to opt-out of recording and transcription at any time, including after joining an interview. Candidates will not be penalized for choosing to opt-out. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Woodard & Curran is an employee-owned engineering, science, and operations firm dedicated to clean water, a safe environment, healthy communities, and happy people. We foster an inclusive, collaborative culture that supports professional growth, flexibility, and meaningful work, empowering our employees to make a lasting impact on our clients, communities, and the planet. Build Your Career with Woodard & Curran! At Woodard & Curran, you'll join a team of hundreds of certified operators supported by engineers, scientists, and environmental experts across the country. Together, we solve complex operational challenges, keep treatment facilities running efficiently, and help protect the environment and public health. We are also committed to investing in our people. Whether you're looking to expand your leadership responsibilities or advance your certifications, we'll support your professional growth through training, mentorship, and ongoing development opportunities. We are seeking an experienced Operations Lead to help manage the operation and maintenance of innovative groundwater remediation and stormwater treatment systems in Bridgewater, New Jersey. This hands-on leadership role is responsible for supporting environmental restoration efforts through the safe, reliable, and efficient operation of treatment facilities that protect local water resources and support long-term site sustainability. The successful candidate will lead daily field activities, coordinate maintenance and contractor work, troubleshoot treatment equipment, and play a key role in ensuring environmental compliance. This position is ideal for a motivated problem solver who enjoys working outdoors, leading teams, and making a measurable impact on environmental stewardship every day. Key Responsibilities As Lead Operator, you will: • Lead daily operation of groundwater and stormwater treatment systems., • Coordinate and prioritize operations and maintenance activities., • Troubleshoot pumps, valves, instrumentation, controls, and treatment equipment., • Support environmental sampling and operational monitoring activities., • Maintain treatment system reliability and respond to equipment failures., • Assist with process optimization initiatives to improve system performance and efficiency., • Promote safe work practices and maintain strong housekeeping standards., • Work closely with the Plant Manager to execute site priorities and long-term objectives., • Provide on-call and emergency response support as needed. Required Qualifications • 5+ years of experience in water, wastewater, groundwater remediation, stormwater treatment, industrial treatment, or related environmental operations., • Demonstrated experience leading operators, maintenance personnel, contractors, or multidisciplinary teams., • Ability to interpret engineering drawings, P&IDs, equipment manuals, technical specifications, and operational data., • Strong mechanical, electrical, instrumentation, and process troubleshooting skills., • Experience supporting preventive maintenance, asset management, equipment reliability, and process improvement programs., • Experience supporting capital projects, equipment installations, startups, or process modifications., • Knowledge of environmental permits, compliance requirements, sampling programs, and reporting processes., • Strong communication, organizational, and project management skills., • Proficiency with Microsoft Office applications and facility management software, including Hach WIMS and Utility Cloud., • Valid driver's license with a satisfactory driving record. Preferred Experience Candidates with experience in any of the following areas are especially encouraged to apply: • Groundwater/Stormwater/Industrial Wastewater remediation systems., • Contractor management., • New Jersey Industrial Wastewater License is preferred. Physical & Work Environment • This position involves working in both indoor and outdoor industrial environments and may require lifting up to 40 pounds. Team members must be available to respond to operational emergencies and provide occasional after-hours support when needed., • As a condition of employment, the successful candidate will be required to complete a job-related physical examination, drug screen, and background check. Why Join Woodard & Curran? This position offers the opportunity to: • Expand your leadership and management skills., • Gain hands-on experience with complex environmental treatment systems., • Lead meaningful projects that support environmental compliance and sustainability., • Work alongside experienced operators and technical specialists., • Receive support for maintaining and advancing industry certifications., • Build a long-term career with a growing employee-owned company. Compensation & Benefits Expected Salary Range: $72,000 – 90,000 annually, depending on experience and licensure. In addition, eligible employees may receive overtime and bonus opportunities. Woodard & Curran offers a comprehensive benefits package that includes: • Generous paid time off and company holidays, • Medical and dental insurance, • Flexible spending accounts, • Retirement savings programs, • Professional development and certification support, • Career growth opportunities, • Employee assistance programs and additional wellness benefits Woodard & Curran offers a comprehensive benefits package. For more information about our benefits & workplace policies visit Benefit & Policy Information - Woodard & Curran. E-Verify Participation: Woodard & Curran participates in E-Verify to confirm the employment eligibility of all newly hired employees. As part of this process, we provide access to the Right to Work & E-Verify postings. Equal Employment Opportunity & Accessibility: Woodard & Curran is an Equal Opportunity Employer. We are committed to non-discrimination and make employment decisions based on job-related factors. Individuals with disabilities and protected veterans are encouraged to apply. If you require a reasonable accommodation during the application process, please contact Beth Sweitzer. Equal Employment Opportunity Policy Workplace Discrimination is Illegal Posting Woodard & Curran Terms of Use Woodard & Curran Privacy Statement Text Messaging: To support an efficient hiring process, we may send brief SMS updates or reminders. You may opt out at any time by replying “STOP.” Unsolicited agency submissions without a signed agreement are not eligible for referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description Position Overview Harris Energy Solutions, LLC (HES) is a nationwide Energy Consulting Services firm. HES offers a full suite of consulting services, including Building Energy Modeling, Renewable Energy Consulting, Master Planning, Energy Audit, Building Commissioning, Measurement and Verification, and Building Retro-Commissioning. We pride ourselves on the work we perform and the services we provide. HES is hiring an Energy Engineer specializing in Energy Modeling to join our team. The Energy Engineer (Energy Modeling) will perform whole-building energy simulations to support design decisions, code compliance, certification programs, and decarbonization planning. This role focuses on accurate, well-documented building energy models that translate design intent into actionable energy and cost insights. Responsibilities • Perform Whole-Building Energy Modeling: Develop baseline and proposed energy models in eQUEST, OpenStudio/EnergyPlus, IES-VE, Trane TRACE 3D Plus, or Carrier HAP for new construction, major renovation, and retrofit projects., • Drawing and Specification Review: Review architectural, mechanical, electrical, plumbing, and envelope documents to identify model inputs, including geometry, constructions, occupancy, lighting, plug loads, HVAC systems, and operating schedules., • Code Compliance and Certification Modeling: Produce ASHRAE 90.1 Appendix G performance-path models, IECC compliance models, and certification submissions for LEED EAp2/EAc1, ENERGY STAR, Passive House, and similar programs., • Support Local Decarbonization Compliance: Develop models supporting compliance with local laws and stretch codes (e.g., NYC Local Law 97, Title 24, Boston BERDO, Washington Clean Buildings Act)., • Parametric and Design Optimization Studies: Run parametric analyses on envelope, HVAC systems, controls, and renewable energy options; quantify life-cycle cost and carbon impacts to support design decisions., • Calibrate Existing Building Models: Calibrate energy models against utility billing or interval data per ASHRAE Guideline 14 standards for retro-commissioning, deep retrofit, and ESPC projects., • Renewable Energy Modeling: Support photovoltaic, solar thermal, geothermal, and battery storage modeling using tools such as PVsyst, SAM, and integrated simulation tools., • Generate Technical Reports: Author energy modeling reports, narratives, and exhibits suitable for clients, design teams, certification reviewers, and authorities having jurisdiction. Requirements • Bachelor's in engineering (Mechanical, Architectural, Electrical, or Facilities) or Building Science, • 1-3 years of energy modeling experience, including at least one internship, co-op, or full-time role, • Hands-on experience with at least one of: eQUEST, OpenStudio/EnergyPlus, IES-VE, Trane TRACE 3D Plus, or Carrier HAP, • Working knowledge of ASHRAE 90.1 (especially Appendix G), ASHRAE 62.1, and applicable energy codes (IECC, Title 24, state stretch codes), • Understanding of HVAC system types, controls, building envelope, and renewable systems, • Familiarity with LEED energy modeling submission requirements preferred, • Strong Excel skills; experience with Python, Ruby, or scripting against modeling tools is a plus, • Experience with large commercial and multi-family buildings preferred but not necessary, • EIT, BEMP, CEM, or LEED AP BD+C credential preferred (or willingness to obtain), • Travel throughout the United States as required by project workload Personal Qualifications • Strong analytical, writing, and presentation skills, • Passionate about mitigating climate change, • Collaborative and a strong team player, • Self-motivated with the ability to multitask and pay attention to detail, • Ability to work independently and within a team environment, • Enthusiasm to learn and grow as a professional Applicants must be legally authorized to work in the U.S. without the need for current or future employer-sponsored work authorization Job Type: Full-time Pay: $70,000.00 - $82,000.00 per year Benefits • 401(k) (Traditional and Roth options), • 401(k) Safe Harbor, • Medical Insurance, • Dental Insurance, • Vision Insurance, • HSA option, • Paid Time Off, • Paid Holidays, • Profit Share Plan, • Company Covered Disability Insurance (LTD, STD), • Company Covered Life Insurance, • Company Covered Financial Advising Schedule • 8-hour shift, • Hybrid with 3 office days Work Location: Piscataway, NJ & Whitestone, NY (Hybrid - T/W/Th in office) EEO Statement: All qualified applicants will receive consideration for employment without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, or sex.

Job DescriptionCompany Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins laboratories work with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate. The Eurofins network of companies is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organization services. It is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences and in the support of clinical studies, as well as having an emerging global presence in Contract Development and Manufacturing Organizations. It also has a rapidly developing presence in highly specialized and molecular clinical diagnostic testing and in-vitro diagnostic products. In over 30 years, Eurofins has grown from one laboratory in Nantes, France to 58,000 staff across a decentralized and entrepreneurial network of 900 laboratories in over 54 countries. Eurofins companies offer a portfolio of over 200,000 analytical methods to evaluate the safety, identity, composition, authenticity, origin, traceability and purity of biological substances and products. 2025, Eurofins generated total revenues of EUR € 7.296 billion, and has been among the best performing stocks in Europe over the past 20 years. Job Description The Senior FSE is considered a subject matter expert in the field of Calibrations, Preventative Maintenance and Repairs and the technical authority for the calibration and certification of clean rooms, biosafety cabinets and other controlled environments. They are expected to be CETA certified, write protocols, methods and SOP’s within their field of expertise, train and direct calibrations, qualifications, and certifications, and review and approve certification work carried out by other field service personnel. The role holds the professional credential on which the business's certification registration depends. The business will operate initially under CETA registration, and the role is accountable for building the operating record, testing hours and customer endorsements required to obtain NEBB Cleanroom Performance Testing firm certification, and for holding the NEBB certification personally on the firm's behalf. Certification Delivery • Perform and authenticate certification and requalification of cleanrooms and controlled environments, including:, • Airflow velocity and volume testing, unidirectional and non-unidirectional, • HEPA and ULPA filter installation leak testing by aerosol photometer or discrete particle counter scanning, • Room pressurization and pressure cascade verification, • Airflow visualization studies, including recording and interpretation, • Recovery testing and containment leak testing, • Non-viable airborne particle counting and ISO classification, including sample location determination, • Biosafety cabinet and fume hood certification to NSF/ANSI 49, • Isolator, RABS and glovebox testing, including glove integrity, • Author test methods, certification protocols and standard operating procedures for the service line, and maintain them through revision., • Review and approve certification reports produced by other engineers and technicians., • Investigate out-of-specification results and support customer deviation and corrective action processes, • Train and direct field service personnel carrying out clean room certifications, including technicians outside of the direct reporting line., • Establish and maintain the business's CETA registration, and deliver all certification work to CETA standards from appointment., • Build the record required for NEBB CPT firm certification — continuous operating history, annual cleanroom testing hours, instrument ownership, local chapter membership and endorsement letters — and manage the application., • Obtain NEBB CPT certification personally, completing the Technician examinations and subsequently the Certified Professional examinations, so that the business can authenticate NEBB Certified Reports., • Maintain relationships with customers and awarding authorities who may provide endorsement in support of firm certification., • Support the evaluation and, if pursued, the technical scope of ISO 17025 accreditation for physical certification. Team • Establish the training and qualification pathway for certification engineers and technicians within and outside the direct reporting line., • Train, mentor and assess engineers and technicians toward CETA and NEBB certification, and sign their competency records. Instruments • Specify, commission and maintain the certification instrument set, including particle counters, aerosol photometers and generators, balometers and flow hoods, thermal and vane anemometers, and micromanometers. Assist in the calibration of similar equipment used by other Eurofins businesses., • Perform troubleshooting, preventative maintenance and repair both in the field and in the lab of various types of laboratory equipment including balances, pH meters, environmental monitoring equipment, hoods, biosafety cabinets, room HEPA filters, plate readers and chambers., • Manage personal parts inventory effectively., • Provide feedback to Director regarding any issue impacting service delivery, particularly issues impacting turnaround times. Commercial and administrative • Provide the technical basis for quotations, including room counts, classification, test scope and frequency., • Represent the business technically to customers during scoping discussions and audits., • Complete administrative paperwork and reports promptly and accurately., • Follow good documentation practices (GDP) as applicable to daily activities., • Contact customers on time and schedule service efficiently., • Adhere to environmental health and safety guidelines., • Effectively communicate with clients and other internal and external parties., • Follow Eurofins work policies and all applicable SOPs. Ensure that training on both remains current., • Maintain client confidentiality, specifically if information about the customer is obtained from sources other than the customer (e.g. complainant, assessors)., • Act impartially within the management system., • Perform other tasks as assigned by Management. Qualifications Requirements • Four-year degree in a related field (e.g., chemistry, analytical chemistry, electronic engineering, or similar) plus 7-10 years’ experience in a related field, preferably as a Field Service Engineer., • SME on providing field service support for clean room certifications, hoods, biosafety cabinets, HEPA filters and other controlled environments., • CETA certification held and in good standing, obtained or renewed within the past five years — CNBT, RCP-CT, or equivalent CETA credential appropriate to the scope of work., • NEBB Cleanroom Performance Testing certification is an advantage, at either Certified Professional or Certified Technician level, held and in good standing. AABC certification will also be considered., • Clear, respectful, and timely verbal and written communication. Proven ability to author protocols, methods, qualification/validation documents and SOP’s., • Experience representing a certification firm during customer quality audits, state board of pharmacy inspections or FDA inspections is preferred., • Demonstrable knowledge of ISO 14644 Parts 1, 2 and 3, and ISO 14644-7 where isolators, RABS and gloveboxes are within scope., • NSF/ANSI 49 for biosafety cabinet and hood calibrations and certifications, • USP <797> and USP <800>, including state board of pharmacy certification and recertification requirements. Where this knowledge is not already held, it must be acquired within the first six months., • Physical ability to lift and transport equipment and perform tasks in various lab environments, • Experience with technical troubleshooting and problem solving, • Must be self-motivated and proactive, • Valid drivers license, • Clean driving record, • Ability to travel within customer territory up to 5 days per week Monday-Friday. Overnight travel as needed. Additional Information Position is full-time, Monday through Friday, 8am-5pm with overtime as needed. Candidates currently living within a commutable distance of North Brunswick, NJ are encouraged to apply. Pay range: $100,000 - $130,000 annually depending on related experience and qualification. Excellent full time benefits including • Comprehensive medical coverage, dental, and vision options, • Life and disability insurance, • 401(k) with company match, • Paid vacation and holidays Eurofins USA BioPharma Services is a Disabled and Veteran Equal Employment Opportunity employer.

Job Description Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customer’s products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along the distribution process. HOW YOU WILL CONTRIBUTE (Overview & Key Responsibilities): As an Industrial Electromechanic, you will be responsible for conducting machine setup, troubleshooting, repairs and preventive maintenance services, as well as performing routine building and facility maintenance duties. • Provides emergency/unscheduled repairs of production equipment during production and performs scheduled maintenance repairs of production equipment during machine service., • Prepares machinery for scheduled production runs., • Diagnose malfunctions and perform necessary repairs or replace defective parts., • Performs mechanic skills including, but not limited to, mechanical, electrical, pneumatic and hydraulic troubleshooting and repair of packaging and production machines., • Reads and interprets equipment manuals and work orders to perform required maintenance and service., • Perform daily routine preventive maintenance and maintain accurate daily repair logs., • Track inventory machinery/equipment with their respective spare parts., • Comply with OSHA safety and health rules., • Training: May be requested to provide training to future machine operators in their perspective roles., • Any additional duties as needed WHAT YOU NEED TO SUCCEED (Qualifications): • High school diploma or GED required; technical school, vocational training, or equivalent industrial maintenance experience preferred., • Bilingual (English & Spanish), • 3-5 years’ of experience in a maintenance mechanic role, or related position, preferably in a manufacturing/packaging environment., • Knowledge with the following: Accepted practices and processes in the maintenance trades; electric motors, relays, PLCs, electro-mechanical equipment and systems found in machinery; servicing and maintenance of simple power, heating and cooling units., • Read and work from sketches, drawings and blueprints; understand occupational hazards and safety precautions of the machinery., • Ability to read and understand product specifications., • Forklift experience., • Ability to lift up to 35 lbs. multiple times a day, • Ability to perform basic mathematical operations. Ability to bend, reach, kneel, and stand for extended period of time. WHAT WILL SET YOU APART (Competencies): • Good multitasking and prioritization skills., • Mechanically inclined., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Ability to work in a team environment., • Good time management skills., • Good analytical and problem-solving skills. WHY JOIN US: At Cryopak, we strive to offer a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Voluntary Accident, Critical Illness, and Hospital Indemnity Insurance, • Voluntary Life and AD&D, • Short-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak’s policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

\n ARMStaffing is seeking a travel CT Technologist for a travel job in Edison, New Jersey. Job Description & Requirements\n \n • Specialty: CT Technologist\n, • Discipline: Allied Health Professional\n, • Start Date: ASAP\n, • Duration: 14 weeks\n, • 40 hours per week\n, • Shift: 8 hours, evenings\n, • Employment Type: Travel\n \n ```html Location\n Edison, NJ Assignment Duration\n This is a 13-week contract position. Schedule / Shift\n Monday to Friday, 3:00 PM - 11:30 PM Job Description\n The Cat Scan Technologist performs computer tomography procedures and related techniques, producing sectional and three-dimensional images for interpretation and assisting with interventional and therapeutic procedures. Responsibilities\n \n • Perform complex CT procedures using professional judgment.\n, • Review and obtain patient clinical history, ensuring documentation is scanned into PACS.\n, • Prepare, screen, and review the accuracy of the contrast questionnaire with patients.\n, • Identify and administer contrast media as prescribed.\n, • Verify appropriateness of exams and communicate with Radiologists as needed.\n, • Call physicians to clarify prescriptions according to CT protocols.\n, • Verify insurance authorized exam scripts and facilitate re-verification.\n, • Obtain outside studies and schedule them in EPIC.\n, • Provide exam copies to patients and requesting physicians.\n, • Evaluate radiographs for diagnostic value using PACS.\n, • Prep patients for scanning, including shielding and immobilization.\n, • Monitor patients for adverse reactions during procedures.\n Required Experience\n \n, • At least 2 years of CT experience required (5 years preferred).\n, • Experience with GE equipment, Epic EMR, and Fuji PACS is required.\n, • Ability to work in a busy ED and maintain workflow is essential.\n, • Must be willing to work in dual modalities (X-ray & CT).\n ```\n \n ARMStaffing Job ID #38481506. Pay package is based on 8 hour shifts and 40.0 hours per week (subject to confirmation) with tax-free stipend amount to be determined. Posted job title: Radiology:CT Tech,15:00:00-23:00:00 About ARMStaffing\n \n Allied Resources Medical Staffing (ARMStaffing) places the most qualified medical professionals in the industry, including: local and travel contract, temp-to-perm, per diem, and direct-hire personnel. \n As a leader in medical staffing, we cover every segment of the healthcare market and take pride in our ability to exceed our clients' expectations. We accomplish this through our total dedication to our clients and field associates, our over 15 years of experience, a strong and diverse poor of medical professionals, and the high level of loyalty of our internal staff. \n We also make it a point to develop and maintain close relationships with staffing and office managers to ensure clear communication and proper placements based on the client's criteria. This allows us to tailor our services to best suit the staffing needs of our clients, while placing our employees in positions that match their abilities and preferences. \n Our goal is to offer unparalleled service to our valued healthcare clients, regardless of facility size or location, and to maintain a top-notch workforce of qualified, dedicated and medical professionals. \n The Experts in Healthcare Recruiting \n \n • Local and travel contracts\n, • Temp-to-perm employment\n, • Direct-hire personnel\n, • Per Diem\n, • Staffing for every segment of the healthcare industry including, RNs, LPNs, and CNAs, and Allied Health Professionals\n, • Long-term contracts, block scheduling and per diem staffing options\n, • 24-Hour customer service and on-call support 365 days a year\n, • Full-time, registered nurse on staff to provide screening, background, and reference checks\n, • Long-term and temporary career options with outstanding employee benefits\n, • Medical Benefits\n, • Company-matched 401K\n \n \n \n

Job Description Cryopak is an innovative, cold chain & temperature-controlled packaging solutions manufacturer, for pharmaceutical, life science, biotech, food, and electronic companies. Cryopak helps to maintain the integrity of our customer’s products through the design, testing and manufacturing of packaging and materials for shipping cold chain products. We also provide the hardware and software for temperature verification along the distribution process. Hours/Shift: • Hours/Shift: 1st Shift from 6:00am – 2:30pm, • Hours/Shift: 2nd Shift from 2:30pm – 11:00pm HOW YOU WILL CONTRIBUTE (Overview & Key Responsibilities): As a Machine Operator, you will perform skilled work in the setup, operation, basic maintenance and repair of manufacturing and/or packaging equipment to safely and effectively produce Temperature Control Packaging and related goods as per quality policy and manufacturing Procedures. • Setup and operate manufacturing and/or packaging equipment., • Load and feed machinery with specified raw materials and parts., • Perform basic repairs and maintenance as needed during production hours and coordinates with Maintenance Mechanic to perform advanced troubleshooting and preventive maintenance., • Refer to work order package and procedural instructions for each assignment before commencing work., • Assure all work assigned is performed in accordance with specifications, instructions, and requirements., • Assist in the performance of a variety of manual labor related to production including but not limited to handling, repeated handling, push, pull, lift, assembly, loading and unloading, packing, and palletization of goods., • Perform assignments in accordance with established safety policies and procedures., • Perform any specified quality assurance checks designated for each assignment adhering to quality policies., • Record specified production information thoroughly and accurately in work order package., • Meet production standards within a reasonable time depending on the degree of difficulty of the designated assignment., • Provide guidance to other individuals on the line, of next steps in the operating line as needed. WHAT YOU NEED TO SUCCEED (Qualifications): • High School Diploma or GED equivalent desired, • Bilingual (English & Spanish), • 1+ years’ experience in a manufacturing environment, • Ability to read and understand product specifications, • Forklift experience., • Ability to lift 50-75 lbs., • Ability to perform basic mathematical operations., • Ability to bend, reach, kneel, and stand for extended period of time., • Mechanically inclined. WHAT WILL SET YOU APART (Competencies): • Good multitasking and prioritization skills., • Must be able to work effectively, courteously, and respectfully with coworkers and other personnel., • Ability to work in a team environment., • Good time management skills., • Good analytical and problem-solving skills. WHY JOIN US: We strive to offer a comprehensive benefits package that helps you and your family maintain health and well-being -both physically and financially. Our comprehensive benefits package includes: • Medical Insurance, • Dental Insurance, • Vision Insurance, • Health Savings Account (HSA), • Flexible Spending Account (FSA), • Voluntary Accident, Critical Illness, and Hospital Indemnity Insurance, • Voluntary Life and AD&D, • Short-Term Disability, • Pet Insurance, • Commuter Transit Benefits, • 401(k) Retirement Plan w/Safe Harbor Employer Contribution, • Paid Holidays, • PTO It is Cryopak's policy that equal employment opportunity be provided without regard to age, race, creed, color, religion, sex, disability, pregnancy, medical condition, genetic information, marital status, sexual orientation, gender identity or expression, ancestry, national or ethnic origin, citizenship status, military status or status as a disabled or protected veteran, or any legally recognized status entitled to protection under applicable federal, state, or local laws.

Job Seekers can review the Job Applicant Privacy Policy by clicking here (http://ryder.com/job-applicant-privacy-policy) . Job Description : Summary The Customer Engagement Manager (CEM) position is responsible for the management of assigned accounts in the Business Unit (BU); the education/development of customer interest in additional Ryder services (including Full-Service Lease, Programmed Maintenance, Lease Financing and Fleet Management Services) by utilizing the Ryder Sales Process. The CEM’s book of business will typically consist of; smaller less complex Local accounts with power fleet size opportunities of 1-4 units, smaller less demanding National accounts, smaller coordinated accounts whereby the economic buyer is not at this location(s). Essential Functions • Attain or exceed assigned sales quotas and profit targets. Maintain regular and consistent in person and virtual contact with customers to meet customer requirements. Develop a sales penetration plan to expand Ryder’s wallet share. Segment account base by opportunity for growth, renewal (retention) and potential for risk of loss. Present Ryder services and capabilities. Develop relationships with all customer buying influencers. Develop complete understanding of customers’ business, goals, and objectives. Work collaboratively with DTS/SCS to develop upsell opportunities for the application of those services as appropriate. Serve as facilitator between customers and Ryder departments or Ryder vendors., • Ensure contracted services are delivered to customers. Orchestrate the development of a productive working relationship with the customer. Maintain appropriate customer contact. Understand and manage customer satisfaction perception. Conduct regularly scheduled customer reviews. Monitor VOC results by account. Develop knowledge base of competitive alternatives and identify share of wallet opportunities. Contribute to an effective transition of accounts sold upstream in Ryder’s services portfolio. Update CRM with relevant account specific details and interactions., • Proactively anticipate problems through continuous dialogue with customer & Ryder staff. Supply customer with information regarding operational performance. Learn customers business & Operations., • Customer Education - Providing customers with information on new services, changes in policies, and best practices for using the leased trucks efficiently., • Training and improvement of sales skills, industry knowledge and personal growth needs. Additional Responsibilities • Performs other duties as assigned. Skills and Abilities • Sales skills, Required, • Account Management skills, Required, • Negotiation skills, Required, • Contractual leasing, Required, • Pricing, Required Qualifications • Bachelor's degree in business, marketing, or transportation, or equivalent experience, Required, • 2 years or more experience providing service to customers., Required, • 2 years or more experience selling to customers., Required Travel Yes, Greater than 60% #LI-CB #INDexempt #FB Job Category: Outside Sales Our Culture & Commitment : At Ryder, you’re trusted to make an impact—while enjoying room to grow and having a voice that’s heard. Our culture is built on respect, collaboration, and shared pride in doing great work rooted in innovation and safety. Your Voice. Your Success. The Future We Build Together. Compensation Information : The compensation offered to a candidate may be influenced by a variety of factors, including the candidate’s relevant experience; education, including relevant degrees or certifications; work location; market data/ranges; internal equity; internal salary ranges; etc. The position may also be eligible to receive an annual bonus, commission, and/or long-term incentive plan based on the level and/or type. Compensation ranges for the position are below: Pay Type : Salaried Minimum Pay Range: $60,000 Maximum Pay Range: $80,000 with commission Benefits Information: For all Full-time positions only : Ryder offers comprehensive health and welfare benefits, to include medical, prescription, dental, vision, life insurance and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Important Note : Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Security Notice for Applicants: Ryder will only communicate with an applicant directly from a [@ryder.com] email address and will never conduct an interview online through a chat type forum, messaging app (such as WhatsApp or Telegram), or via an online questionnaire. During an interview, Ryder will never ask for any form of payment or banking details and will never solicit personal information outside of the formal submitted application through www.ryder.com/careers . Should you have any questions regarding the application process or to verify the legitimacy of an interview or Ryder representative, please contact Ryder at careers@ryder.com or 800-793-3754. Current Employees : If you are a current employee at Ryder, please click here (https://wd5.myworkday.com/ryder/d/task/2998$46522.htmld) to log in to Workday to apply using the internal application process. Job Seekers can review the Job Applicant Privacy Policy by clicking here (http://ryder.com/job-applicant-privacy-policy) . #wd

Job Seekers can review the Job Applicant Privacy Policy by clicking here (http://ryder.com/job-applicant-privacy-policy) . Job Description : Summary At Ryder, our most important competitive advantage is our people. CULTURE- INTEGRITY- FAMILY . As a Customer Service Coordinator, you’ll be part of a dynamic team, equipped to succeed and empowered to develop your transportation & logistics career. This is an essential industry and we’ve been in the game since 1933! Shop Location: South Plainfield, NJ Hours: 7:00am - 3:30pm Schedule: Monday - Friday Salary – Paid Weekly Summary The Customer Service Coordinator, or CSC , will support the shop management process through timely customer communications and scheduling, inventory ordering and stocking, repair follow-up and maintenance file management. In this role, you will acquire proven industry knowledge, skills and resources to develop your operations & fleet maintenance background. We allow you to carve out your own career path and promote from within , based on performance. The ideal path of progression in this role is an Ops Supervisor. If you're motivated, coachable, and looking for a fast paced, inclusive environment, you've come to the right place. Competitive pay & fast growth, full benefits package, 401k employer match, PTO, and a discount on shares! You thought that was it? Take a look at a few of these: Ryder's most recently been named "Top Company for Women to Work for in Transportation (https://newsroom.ryder.com/news/news-details/2022/Ryder-Named-One-of-the-Top-Companies-for-Women-to-Work-For-in-Transportation-in-2022/default.aspx) " by Women in Trucking, one of Fortune Magazine ’s “World’s Most Admired Companies (https://newsroom.ryder.com/news/news-details/2022/FORTUNE-Magazine-Names-Ryder-Among-Worlds-Most-Admired-Companies-for-10th-Consecutive-Year/default.aspx) ”, & one of “Reader's Choice Excellence Awards (https://newsroom.ryder.com/news/news-details/2022/Ryder-Voted-Among-Top-10-3PLs-in-Readers-Choice-Excellence-Awards-by-Inbound-Logistics/default.aspx) ” by Inbound Logistics. What about our green initiative…? We have the largest EV footprint in the U.S. In addition to that, Verizon has recognized Ryder with their "Supplier Environmental Excellence Award (https://https/www.businesswire.com/news/home/20220712005382/en/Ryder-Receives-Verizon%E2%80%99s-Supplier-Environmental-Excellence-Award) " Here is from people that work here! https://www.youtube.com/watch?v=usBbl6L1V6E This is Ryder: https://www.youtube.com/watch?v=b24PFgxvVS0 Essential Functions • CUSTOMER SERVICE: Improve the quality and consistency of customer communications and meet customer's expectations Perform customer relationship activities to include customer interface, issue resolution and customer satisfaction Execute customer communication protocol pertaining to PM scheduling and follow-up, breakdowns and vehicle status updates Improve the quality and consistency of customer communications and ensure customer's expectations are met Drive improvement of Customer Satisfaction (CSI) scores., • WORK FLOW MANAGEMENT: Enhance branch productivity through effective work scheduling and planning Create repair order tasks and update work planning sheet Review maintenance reports to identify and schedule preventative maintenance, repair campaigns and vehicles requiring follow-up Coordinate with rental counter to identify repair requirements, available substitute units and vehicle wash requirements Coordinate outside repair with vendors and customers Provide a resource that allows the management team time to effectively manage shop operations., • PARTS MANAGEMENT: Contribute to cost containment through effective inventory planning and warranty Execute parts inventory management processes to include conducting physical inventory, parts ordering, receiving, stocking, managing purchase orders and parts invoice and coordinating parts pick-up and delivery Make recommendations on min-max levels to the inventory planning team Manage parts obsolescence Ship warranty and return parts Organize and ensure cleanliness in the parts room., • ADMINISTRATIVE: Effectively handle all incoming shop calls Clerical duties within the shop operations which include vehicle maintenance files Process all Account Payable Create repair orders for technicians. Additional Responsibilities • Contribute to cost containment through effective inventory planning and warranty., • Enhance branch productivity through effective work scheduling and planning., • Performs other duties as assigned. Skills and Abilities • Detail oriented with excellent follow-up practices, Required.., • Capable of multi-tasking, highly organized, with excellent time management skills, Required, • Flexibility to operate and self-driven to excel in a fast-paced environment , Required, • Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors). , Required, • Ability to work independently and as a member of a team, Required Qualifications • H.S. Diploma/GED, Required., • 1 year or more in customer service or comparable experience with issues resolution, Required., • Strong computer skills including spreadsheets and word processing software Advanced, Required. Travel Yes #LI-post #INDexempt #FB #LI-JJ Job Category: Operations and Support Our Culture & Commitment : At Ryder, you’re trusted to make an impact—while enjoying room to grow and having a voice that’s heard. Our culture is built on respect, collaboration, and shared pride in doing great work rooted in innovation and safety. Your Voice. Your Success. The Future We Build Together. Compensation Information : The compensation offered to a candidate may be influenced by a variety of factors, including the candidate’s relevant experience; education, including relevant degrees or certifications; work location; market data/ranges; internal equity; internal salary ranges; etc. The position may also be eligible to receive an annual bonus, commission, and/or long-term incentive plan based on the level and/or type. Compensation ranges for the position are below: Pay Type : Hourly Minimum Pay Range: $25.00 Maximum Pay Range: $25.00 Benefits Information: For all Full-time positions only : Ryder offers comprehensive health and welfare benefits, to include medical, prescription, dental, vision, life insurance and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Important Note : Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Security Notice for Applicants: Ryder will only communicate with an applicant directly from a [@ryder.com] email address and will never conduct an interview online through a chat type forum, messaging app (such as WhatsApp or Telegram), or via an online questionnaire. During an interview, Ryder will never ask for any form of payment or banking details and will never solicit personal information outside of the formal submitted application through www.ryder.com/careers . Should you have any questions regarding the application process or to verify the legitimacy of an interview or Ryder representative, please contact Ryder at careers@ryder.com or 800-793-3754. Current Employees : If you are a current employee at Ryder, please click here (https://wd5.myworkday.com/ryder/d/task/2998$46522.htmld) to log in to Workday to apply using the internal application process. Job Seekers can review the Job Applicant Privacy Policy by clicking here (http://ryder.com/job-applicant-privacy-policy) . #wd

Job Seekers can review the Job Applicant Privacy Policy by clicking here (http://ryder.com/job-applicant-privacy-policy) . Job Description : BUILD ON YOUR SALES CAREER WITH A COMPANY THAT HAS A FUTURE. At Ryder, our most important competitive advantage is our people. CULTURE-INTEGRITY-FAMILY. As a " CDM ", you’ll be part of a dynamic team, equipped to succeed and empowered to develop your sales career. Even in 2020, Ryder continues to move the transportation industry forward. As an innovative outsourced solutions provider, we enable commerce to flow reliably, efficiently, and safely. How? • Top Technology Provider for Food & Beverage Supply Chain, • Top Third Party Logistics (3PL) Provider to the Retail Industry, • Largest Electric Truck Footprint in the US Job Summary The Customer Development Manager position is responsible for the management of assigned accounts in the Business Unit (BU); the education/development of customer interest in additional Ryder services (including: Full Service Lease, Programmed Maintenance, Lease Financing, Fleet Management Services and Dedicated Contract Carriage) by utilizing the Ryder Sales Process. Your ability to build and maintain relationships is critical to the success in this role. The position requires ground travel and includes salary, a car allowance, company cell phone, and excellent monthly commission potential. Some travel may apply for training. We also offer a full benefits package, 401k employer match, and a discount on shares! YOUR JOB SEARCH ENDS HERE. Check out these videos! https://www.youtube.com/watch?v=u7nizKsPCdw https://vimeo.com/335888960/44a23a3560 Ryder System, Inc. has been recognized from Fortune Magazine’s 2020 list of “World’s Most Admired Employers”.” Essential Functions • Maintain regular and consistent contact with customers to meet customer requirements. Develop sales penetration plan. Segment account base by opportunity for growth and potential for risk. Present Ryder services and capabilities. Develop relationships with all customer buying influences. Develop complete understanding of customers business, goals and objectives. Work with RIL to develop opportunities for the application of those services as appropriate. Serve as facilitator between customer and Ryder departments or Ryder vendors., • Ensure contracted services are delivered to customer. Orchestrate the development of a productive working relationship with the customer. Maintain appropriate customer contact. Understand and manage customer satisfaction perception. Conduct regularly scheduled customer reviews. Monitor CSI results by account. Develop knowledge base of competitive alternatives. Contribute to an effective transition of accounts sold., • Proactively anticipate problems through continuous dialogue with customer & Ryder staff. Supply customer with information regarding operational performance. Learn customers business & operations, • Training and improvement of sales skills, industry knowledge and personal growth needs Additional Responsibilities • Performs other duties as assigned. Skills and Abilities • Demonstrates problem solving skills, • Strong verbal and written communication skills, • Effective interpersonal skills, • Ability to analyze and interpret financial data, • Ability to leverage customers financial data to determine needs and solutions match, • Ability to work within various geographic and demographic environments, • Ability to guide, engage, and impart knowledge to others, • Willingness and ability to work with and mentor new sales employees, • Ability to work independently and as a member of a team, • Ability to work in team concept while holding self fully accountable, • Flexibility to operate and self-driven to excel in a fast-paced environment, • Capable of multi-tasking, highly organized, with excellent time management skills, • Detail oriented with excellent follow-up practices Qualifications • Bachelor's degree required in Business, Marketing, Transportation or equivalent experience, • Five (5) years or more demonstrated consecutive sales and customer relationship management experience in prior sales responsibilities required DOT Regulated: No #FB #INDexempt #LI-CB Job Category: Outside Sales Our Culture & Commitment : At Ryder, you’re trusted to make an impact—while enjoying room to grow and having a voice that’s heard. Our culture is built on respect, collaboration, and shared pride in doing great work rooted in innovation and safety. Your Voice. Your Success. The Future We Build Together. Compensation Information : The compensation offered to a candidate may be influenced by a variety of factors, including the candidate’s relevant experience; education, including relevant degrees or certifications; work location; market data/ranges; internal equity; internal salary ranges; etc. The position may also be eligible to receive an annual bonus, commission, and/or long-term incentive plan based on the level and/or type. Compensation ranges for the position are below: Pay Type : Salaried Minimum Pay Range: $58,000 Maximum Pay Range: $70,000 with commission Benefits Information: For all Full-time positions only : Ryder offers comprehensive health and welfare benefits, to include medical, prescription, dental, vision, life insurance and disability insurance options, as well as paid time off for vacation, illness, bereavement, family and parental leave, and a tax-advantaged 401(k) retirement savings plan. Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability. Important Note : Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned. Security Notice for Applicants: Ryder will only communicate with an applicant directly from a [@ryder.com] email address and will never conduct an interview online through a chat type forum, messaging app (such as WhatsApp or Telegram), or via an online questionnaire. During an interview, Ryder will never ask for any form of payment or banking details and will never solicit personal information outside of the formal submitted application through www.ryder.com/careers . Should you have any questions regarding the application process or to verify the legitimacy of an interview or Ryder representative, please contact Ryder at careers@ryder.com or 800-793-3754. Current Employees : If you are a current employee at Ryder, please click here (https://wd5.myworkday.com/ryder/d/task/2998$46522.htmld) to log in to Workday to apply using the internal application process. Job Seekers can review the Job Applicant Privacy Policy by clicking here (http://ryder.com/job-applicant-privacy-policy) . #wd

Job DescriptionDescriptionClinical Athletic Trainer Location: Old Bridge, NJ Entity: Alliance Orthopedics Reports To: Clinical Director Escape the Sidelines – Elevate Your Clinical Career Are you a licensed Athletic Trainer looking for a professional, high-energy clinic environment? Alliance Orthopedics, the region's most dynamic multidisciplinary practice—is seeking a motivated Clinical ATC to join our elite sports medicine team. At Alliance, you aren’t just on the sidelines; you are an integral part of a conservative care team working alongside Physical Therapists, Chiropractors, MDs, and Orthopedic Surgeons. We provide the resources and on-the-job training to help you utilize your full scope of practice in a premier clinical setting. Alliance Orthopedics Alliance Orthopedics is a multidisciplinary healthcare organization dedicated to helping patients get back to the activities they love. Our integrated team of medical providers, orthopedic specialists, physical therapists, occupational therapists, chiropractors, athletic trainers, and rehabilitation professionals work together to create a seamless patient experience and deliver exceptional outcomes. What sets Alliance Orthopedics apart is our collaborative approach. Medical and conservative care teams work hand in hand to eliminate barriers, improve communication, and collapse recovery timelines. If you are passionate about performance, injury prevention and helping people return to the activities they love, Alliance Orthopedics offers an opportunity to practice alongside a world class multidisciplinary team while making a meaningful impact every day. Why Join the Alliance Team? • Work-Life Balance: Stable, clinic-based schedule (Full-time, One Location, 4/10’s schedule)., • Clinical Growth: New Hire Mentorship Program, • Financial Security: 401(k) with company match + Retirement savings account., • Premium Benefits: Comprehensive Health, Dental, and Vision Insurance + Life & Disability coverage., • Perks: Tuition Reimbursement (terms apply) + Mental Healthcare benefits + Annual CEU reimbursement, • Culture: A "high-octane," fun, and motivating atmosphere where we help patients get BETTER EVERYDAY. Summary of Responsibilities What You’ll Do (Clinical Responsibilities) • Direct Patient Care: Provide engaging one-on-one evaluations and build genuine rapport with patients to understand their functional goals., • Advanced Testing: Oversee Physical Performance Testing (PPT), including Functional Movement Screening (FMS) and computer-recorded strength testing., • Exercise Prescription: Develop and tailor patient-specific rehab programs and monitor progressions/regressions., • High-Tech Modalities: Utilize state-of-the-art equipment including Alter-G Treadmills, DRX-9000 Traction, Normatec, Game Ready, and Litecure Laser., • Interdisciplinary Liaison: Communicate directly with surgeons and medical doctors to streamline patient care plans., • Community Engagement: Participate in exciting marketing events, team outings, and company initiatives. Requirements:, • Valid New Jersey Athletic Trainer License, • Degree from an accredited Athletic Training Education Program., • 2+ years in a healthcare setting with a strong understanding of sports-related injuries and manual techniques., • Excellent interpersonal, organizational, and customer service skills, especially the ability to show compassion for patients coming from all walks of life, • Understanding of therapeutic treatments, manual massage, exercise prescription, and physical therapy techniques and equipment, • An articulate team player who brings energy and a willingness to challenge themselves and their patients. Alliance Orthopedics is the region's most dynamic multidisciplinary orthopedic practice with nine clinic locations across New Jersey., • Bloomfield, • Fair Lawn, • Union, • Randolph, • East Brunswick, • Middletown, • Freehold, • Old Bridge, • Toms River Job Type:, • Full-time, on-site, • One location, • Exempt Background Check Requirement: Employment is contingent upon the successful completion of a background check, which may include verification of employment history, education, criminal records, and other relevant information as permitted by law.