Offres parts department à Edison, New JerseyCréer des alertes d'emploi

Job Title: CT Technologist Location: RWJ New Brunswick Department: Cat Scan Req#: 0000178387 Status: Full-Time Shift: Night Pay Range: $46.30 - $55.37 per hour Pay Transparency: The above reflects the anticipated hourly wage range for this position if hired to work in New Jersey. The compensation offered to the candidate selected for the position will depend on several factors, including the candidate's educational background, skills and professional experience. Job Overview: Performs duties directly involved with a variety of CAT Scan procedures. Prioritizes the patient as number one, and to put forth the utmost quality as a CT Technologist. Qualifications: Required: • High School Diploma or equivalent required., • Graduate of an A.M.A. approved school of Radiography Education., • Must have ARRT or CRT and State of New Jersey License. Preferred: • Experience: Three years hospital experience as a staff technologist preferred, with the ability to work with minimal supervision. Scheduling Requirements: • Full-Time Nights, 830p-7a, at Morris Cancer Center - New Brunswick, NJ, will also have responsibilities at University Hospital and Plum St. Imaging Center on the New Brunswick Campus. All three buildings are connected by bridge. Essential Functions: • Positions patient to obtain study as prescribed by standard operating procedures., • Able to position all anatomical parts as indicated by the Standard Operating Procedures., • Performs the preparation in order to insure the prompt commencement of the procedure., • Ensures all necessary equipment is at hand prior to starting the ordered examination., • Under the direction of a Radiologist, instructs and administers cleansing preps and contrast agents., • Protects patients and other personnel by administrating proper radiation protection techniques., • Protects the reproductive organs with appropriate apparel, if visualization of these areas is not required., • Transfers and properly position patients for examinations in order to obtain desired radiographic results according to physician specifications., • Assists physicians in performance of examinations., • As outlined in radiology policy and procedure and under the direction of the medical chairman the technologist will have proven competency in the administration of IV contrast media, to include venipuncture., • Practices sterile techniques and prevents cross contamination. Secures and returns supplies. Maintains room and room’s stock., • Responsible for necessary equipment maintenance recommendations and troubleshooting when indicated. Keeps all necessary equipment maintenance logs which pertain to preventative maintenance of Emergency service., • Makes sure all necessary supplies are in room and restocks room accordingly., • Responsible for patient scheduling and smooth flow of schedule and patient preparation including contrast administration., • Responsible for quality control of Cat scan examinations., • Uses the computer system according to standard operating procedures:, • Able to enter studies in RIS and HIS, and track cases., • Able to split and fix studies in PACS as necessary., • Attends in-service training as required by the department, • Able to attend the majority of educational in-services., • Explains procedures to the patient and answers any questions prior to the commencement of the procedures., • Completes all necessary paperwork/documentation prior to the submitting of the procedure for interpretation., • Assists in the instruction of student technologists At RWJBarnabas Health, our market-competitive Total Rewards package provides comprehensive benefits and resources to support our employees’ physical, emotional, social, and financial health. • Paid Time Off (PTO), • Medical and Prescription Drug Insurance, • Dental and Vision Insurance, • Retirement Plans, • Short & Long Term Disability, • Life & Accidental Death Insurance, • Tuition Reimbursement, • Health Care/Dependent Care Flexible Spending Accounts, • Wellness Programs, • Voluntary Benefits (e.g., Pet Insurance), • Discounts Through our Partners such as NJ Devils, NJ PAC, Verizon, and more! Choosing RWJBarnabas Health RWJBarnabas Health is the premier health care destination providing patient-centered, high-quality academic medicine in a compassionate and equitable manner, while delivering a best-in-class work experience to every member of the team. We honor and appreciate the privilege of creating and sustaining healthier communities, one person and one community at a time. As the leading academic health system in New Jersey, we advance innovative strategies in high-quality patient care, education, and research to address both the clinical and social determinants of health. RWJBarnabas Health aims to truly make a unique impact in local communities throughout New Jersey. From vastly improving the health of local residents to creating educational and career opportunities, this combination greatly benefits the state. We understand the growing and evolving needs of residents in New Jersey—whether that be enhancing the coordination for treating complex health conditions or improving community health through local programs and education. Equal Opportunity Employer

Job Description Mavis Tires & Brakes at Discount Prices - Automotive Mechanics Put your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Mechanics to join Team Mavis at one of our state-of-the-art automotive service, repair, and tire sales centers in the Old Bridge, NJ area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Automotive Mechanic As Mavis's leaders in undercar repairs, our Automotive Mechanics are trusted to inspect, diagnose, and perform a wide variety of automotive services on customers' vehicles. Mavis's Automotive Mechanics perform a wide variety of undercar repairs, including brakes, struts, and shocks. Automotive Mechanics are also responsible for completing state-mandated inspections, changing oil and filters, checking fluids, replacing worn parts, and dismounting, mounting, rotating, and balancing tires. Employee Benefits At Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement. Qualifications We recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Mechanic, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; (3) possess 2 years of experience and/or training in automotive repair and maintenance or any combination of education, training and experience which demonstrates the ability to perform the duties and responsibilities of the position; and (4) possess an extensive tool box of personal tools used in performing undercar repairs. The following additional qualifications are preferred: (1) state inspection license(s); and (2) ASE Certifications in Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5). As an active position, Automotive mechanics are required to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach and perform repeated and repetitive movements consistent with vehicle maintenance and automotive repair. Mechanics must regularly lift and/or move items weighing over 50 pounds. What are you waiting for? APPLY NOW! Candidates can apply online at www.mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995. For more information about Mavis, please visit www.mavis.com. Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro \nCompany Description Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value. We're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today! Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value.\r\n\r\nWe're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!

Job Description PEP BOYS / Mavis Tire - Automotive Mechanics Competitive Weekly Pay + Weekly Incentive Compensation | Full-Time | Career Growth Opportunities Pep Boys is now part of the Mavis Tire family-and we're growing our team! We're looking for experienced, full-time Automotive Mechanics to join Team Mavis at our automotive service, repair, and tire sales centers in the East Brunswick, NJ area. As part of the Mavis family, you'll have the stability of joining the nation's largest automotive service organization, with more than 4,000 locations, competitive weekly pay, excellent benefits, and opportunities to grow your career. About the Position As an Automotive Mechanic, you'll inspect, diagnose, and perform a variety of automotive maintenance and repair services to help keep our customers safely on the road. Responsibilities include: • Performing undercar repairs, including brakes, struts, shocks, suspension, and steering, • Diagnosing vehicle maintenance and repair needs, • Performing oil and filter changes and checking fluids, • Replacing worn or damaged parts, • Completing state inspections, where applicable, • Mounting, rotating, and balancing tires, • Maintaining Mavis standards for quality, safety, and customer service Why Join Team Mavis? We offer our Automotive Mechanics: • Competitive weekly pay + weekly incentive compensation, • Medical, dental, and vision insurance, • 401(k) with employer match, • Paid vacation, PTO, and holidays, • Life insurance, • On-the-job training, • Opportunities for career growth and advancement, • A stable, team-oriented work environment Qualifications To be eligible, you must: • Be at least 18 years of age and legally authorized to work in the United States, • Have at least 2 years of automotive repair and maintenance experience and/or training, or an equivalent combination of education, training, and experience, • Have the personal tools necessary to perform automotive and undercar repairs Preferred: State inspection license(s) and ASE Certifications, including Automotive Maintenance and Light Repair (G1), Suspension and Steering (A4), and Brakes (A5). Physical Requirements Automotive Mechanics must be able to stand, walk, bend, kneel, stoop, crouch, crawl, climb, pull, reach, and perform repetitive movements associated with automotive repair. Mechanics must also be able to regularly lift and/or move items weighing more than 50 pounds. Ready to Join Our Team? APPLY NOW! Apply online at mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. Questions? Call our Recruitment Department toll-free at 844-375-3995. Join Pep Boys and Team Mavis-and build your career with a growing automotive leader. Mavis is an Equal Opportunity Employer. Job Posted by ApplicantPro \nCompany Description Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value. We're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today! Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value.\r\n\r\nWe're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!

Job DescriptionResponsibilities: • Physically load the company truck at the branch and verify the condition of the truck, the manifest, and other paperwork associated with the deliveries to be made, • Safely operate a company vehicle in a courteous and responsible manner while adhering to all traffic safety regulations; monitored via in-cab cameras., • Drive to the delivery destination, confirm the order with the customer, unload and verify the product, obtain confirmation signature and payment from the customer, • Make proper notations on the manifest and provide receipts on parts being returned from customers to the branch, • Pick up buyout purchase orders from vendors on vendor "fill in " purchase orders and deliver parts back to the branch or customer, • Collect accounts receivable, as necessary, • Work in such a manner as to prevent shortages and damage to products, • Comply with established company policies and procedures, • Serve customers courteously, • Perform other duties as assigned as business needs change. Qualifications • Must be or willing to be DOT Compliant., • Must possess a valid driver's license, • Ability to lift up 50-75 + pounds and physically load/unload truck with customer orders, • Excellent verbal, written, and auditory communication skills., • Ability to multitask, prioritize, and work under pressure., • Strong attention to detail and organizational skills., • Ability to work well in a team environment and collaborate with others., • Capacity to maintain composure and politeness under difficult circumstances., • Aptitude to be available and adjust working hours according to demands.#EP Future Communication Consent: By applying, you are providing consent for Equiliem to engage with you via phone calls, AI-generated calls, AI-generated text messages, standard text messages, and/or emails to share job opportunities. Consistent with our Privacy Policy, information obtained will not be shared with third parties for marketing or promotional purposes. Message frequency may vary for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You may reply STOP to cancel or HELP for assistance. EEO Employer: Equiliem is an equal opportunity employer. We do not discriminate or allow discrimination based on race, color, religion, creed, sex, age, sexual orientation, gender identity, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, disability, status as a crime victim, protected veteran status, political affiliation, union membership, or any other characteristic protected by law. Equiliem will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable law. If you have visited our website in search of information on employment opportunities or to apply for a position, and you require an accommodation in using our website for a search or application, please contact our Employee Services Department at support@equiliem.com or (732) 238-6050. Pandologic. Keywords: Pick Up and Delivery Driver, Location: South Plainfield, NJ - 07080 , PL: 604315872

Job Description JOB DESCRIPTION: • Diagnose unit repair needs and perform designated repairs on company and customer owned commercial generators/engines as directed., • Perform necessary troubleshooting and notify Service Manager of outstanding issues., • Expected to complete tasks with no/limited supervision., • Demonstrates extremely well developed technical and troubleshooting skills with strong analytical problem-solving skills in their work unit., • Demonstrates the need for continuous self-development and seeks every opportunity to improve their personal, technical, and interpersonal skills., • Verified findings, review readings of gauges and procedures and compare to manufactured specs., • Install, replace, rebuild, or repair the parts and/or equipment in a timely manner and according to specifications, • Consistently follows all Foley safety policies and procedures to include all Personal Protective Equipment being worn at all times, as well as contamination control guidelines., • Willing to respond to after-hour emergency calls as directed by supervisor., • Test the part or equipment and perform quality checks after work is complete., • At the end of shift, secure all equipment and machinery and complete all required paperwork., • Basic computer skills and good interpersonal and communications skills., • The candidate must have a clean driving record and current driver’s license. RECOMMENDED QUALIFICATIONS: • Minimum 3-5 years experience with Cat/Non-Cat power gen units., • Must be able to multitask., • Assist parts department in researching and ordering needed parts., • Strong Computer skills preferred, knowledge of SisWeb and ET. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Job DescriptionThe Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to:· Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery.· Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines.· Verifies material, lubricants, solvents and packaging material are correct.· Produces products that conform to all of the requirements outlined in the job book· Monitors production process during the production run· Performs maintenance activities where applicable· Stops production when product is not in conformance and follows the nonconformance procedure.Product Inspection and Nonconformance Process 40%· Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book.· Completes all necessary documentation.· Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred.· 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION· None TECHNICAL SKILLS· SPC· Blueprint OTHER SKILLS· WIP tracking· Multitasking· Personal Accountability· Problem solving· Spatial dexterity· Manual dexterity· Attention to detail· Organizational skills· Basic computer skills Hourly starting rate: $18.65 + 15% differential per hour MICRO offers a comprehensive benefits package to eligible employees, including medical, dental and vision insurance; life and disability insurance; a 401(k)-retirement plan; paid time off; paid holidays; and other company-sponsored benefits. Eligibility and benefit offerings are subject to the terms of the applicable plans and company policies. While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work.While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills Hourly starting rate: $18.65 + 5% differential per hour MICRO offers a comprehensive benefits package to eligible employees, including medical, dental and vision insurance; life and disability insurance; a 401(k)-retirement plan; paid time off; paid holidays; and other company-sponsored benefits. Eligibility and benefit offerings are subject to the terms of the applicable plans and company policies. While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

JESCO is a premier dealer of heavy construction equipment and technology in the Northeast and Mid-Atlantic regions. We proudly represent John Deere, Wirtgen, Kleeman, Vögele, Hamm, Ditch Witch, Magni, Topcon, and many more products for purchase, rental, parts, and service. Family-owned and operated for more than 50 years, we are hiring to grow our award-winning company! \n \n Why JESCO: \n Join a growing team with a lucrative opportunity in equipment sales. Driven sales professionals will have the ability to achieve uncapped commissions. Apply today and start a long term career with the Down to Earth Equipment People of JESCO! \n \n The Territory Manager is responsible for the direct sale of new, used and rental of John Deere Construction & Forestry and Allied Products to assigned accounts. Responsible for all sales activities, from lead generation through quote and close. Build and maintain strong customer relationships focusing on long term mutual growth. \n \n Responsibilities \n\n • Track construction bid results to identify opportunities with existing accounts and prospects.\n, • Determine customer needs and select applicable equipment configurations to meet customers' technical requirements and applications.\n, • Perform trade evaluations on new quote opportunities.\n, • Perform price calculations and generate customer quotations.\n, • Write bid specifications that favor John Deere products for government agency bids & purchases.\n, • Perform product demonstrations to prospective buyers while effectively communicating features and benefits of our products and services.\n, • Perform Operation & Maintenance training on new equipment deliveries.\n, • Attend and participate in trade shows, conferences and other industry related networking events.\n, • Maintain awareness of pertinent client information including key influencers and decision makers, future purchasing plans, payment or financing preferences and fleet profiles.\n, • Maintain records of customer communications, personal visitations and opportunities in the company CRM system.\n, • Communicate any client information that may affect company decisions to appropriate department personnel as needed.\n, • Assist in the resolution of outstanding accounts receivables or other client concerns or disputes.\n, • Maintain knowledge of competitors’ products and identify and report intelligence on competitors pricing or marketing strategies to management and peers.\n, • Submit a verity of sales reports as required including activities, opportunities, deals pending and adherence to goals.\n, • Maintain current knowledge of JESCO products.\n, • Understand and comply with established guidelines that ensure a safe and healthy work environment.\n\n \n Performance Measures \n\n • New and Used equipment Sales\n, • Rental Revenue\n, • Gross Profit Margin Achieved\n, • Market Share\n, • Number of New Accounts\n, • Call Frequency Achievement\n, • Trade Appraisal Detail & Accuracy\n, • Conflict Resolution\n, • Product & Selling Skills Learning\n, • Timely and Accurate Sales Reporting\n\n \n Requirements \n\n • Five years of proven outside sales experience.\n, • Knowledge of construction and/or industrial equipment operation and applications.\n, • Strong interpersonal and oral communication skills.\n, • Strong presentation skills and professional appearance.\n, • Excellent planning and organizational skills.\n, • Strong written communication skills with exceptional presentation.\n, • Negotiation and business acumen.\n, • Proficiency in Microsoft Office products and CRM systems.\n, • High energy, excellent self-motivation and work ethic.\n\n \n Physical Requirements: \n\n • Employee is expected to occasionally operate, demonstrate, climb up and down and walk around the equipment to sell to customers.\n, • Employee should have the physical ability to evaluate equipment for trade.\n, • This includes climbing on the equipment and operating the equipment.\n, • Employee will be expected to drive a vehicle and cover a particular assigned territory.\n, • Driving in a vehicle may be up to 80% of their day.\n, • Employee must be able to travel by air to attend any Sales related or professional development events or as required by the company.\n, • Employee should be able to lift and carry 50 pounds.\n, • Candidates should be able to walk on uneven surfaces and terrain, work in construction site environments to meet with customers on jobsites.\n\n \n Certifications/Licenses: \n\n • Valid Driver's License – Candidates must meet JESCO’s outside insurance underwriting requirements.\n\n \n Benefits: \n\n • Medical, Dental & Vision Insurance\n, • 401(k) Plan + Company Match\n, • Paid Time Off (PTO)\n, • Growth opportunities\n, • College Savings (529) Plan\n, • EAP (Employee Assistance Program) – includes three (3) free counseling sessions,·\n, • Paid Training· Family owned and operated\n, • Paid Company Holidays\n, • Discounts on products\n, • Base + Commission Pay Structure· Company vehicle.\n\n \n Pre-Qualifications for Employment At JESCO \n\n • JESCO participates in E-Verify to ensure that all of its employees are legally able to work in the United States.\n, • All job offers are contingent upon the successful candidate completing and passing criminal and other background checks, a physical examination and drug testing, all done at the company’s expense.\n, • All employees required to operate a company vehicle or their own personal motor vehicle as an essential function of their job must meet JESCO’s outside fleet insurance underwriting requirements.\n\n \n We are an equal opportunity employer and prohibit discrimination and harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

JESCO is a premier dealer of heavy construction equipment and technology in the Northeast and Mid-Atlantic regions. We proudly represent John Deere, Wirtgen, Kleemann, Vögele, Hamm, Ditch Witch, Magni, Topcon, and many more products for purchase, rental, parts, and service. Family-owned and operated for more than 50 years, we are hiring to grow our award-winning company! \n \n Join the Down to Earth Equipment People! Learn about the vast world of construction equipment and build a lucrative future with JESCO Inc. Nothing runs like a Deere, but JESCO certainly keeps it in gear! \n \n Sales Managers are responsible for the efficient and profitable sales of all products and equipment. Oversees the activity of the sales staff with attention given to servicing the interest and needs of every customer. Advises and makes recommendations to the V.P. and President with the respect to the best interest of the sales department. \n \n Responsibilities: \n\n • Prepare reasonable annual objectives for the sales department. These objectives should be reviewed and maintained on a monthly basis\n, • Sees that authorized sales plans and programs are carried out by the sales department with respect to profit, volume, product mix and coverage\n, • Insures availability of adequate manpower at all times. The sales department should be available to our customers Monday through Saturday.\n, • Make yourself available for unconventional business hours\n, • Works with sales consultants in the field to develop maximum selling effort, makes territorial changes as necessary\n, • Initiates necessary action to insure proper technical and service department support for the sales department, coordinates warranty expense program with service manager\n, • Participate, organizes and conduct training programs and sales meetings, or arrange for such activities to be performed by qualified personnel\n, • Coordinate all company trades and secure financing arrangements with regard to allowance on trade-ins, (With the V.P. Sales and/or President) and insures that the target profit goals are met\n, • Periodically evaluates each salesman’s performance and planned goals. Provide guidance and direction to assist them in their professional development\n, • Maintain proper records, submit necessary reports, check customer credit status and controls expenditures along with other required administrative details\n, • Provide to the sales force any necessary documents on reporting on daily activities, use of time more effectively and efficiently and follow up procedures for potential customers.\n, • Resolve customer complaints in a prompt and efficient manner to minimize customer inconvenience and maximize the company business image with the customer\n, • Provide effective sales presentations to support the dealership's sales goals.\n, • Understand and support the company's sales policies and procedures to provide proper and effective service to all customers.\n, • Stay current on technological changes in industry; understand equipment terminology and report competitive information to the Senior V.P. and President.\n, • Perform other duties as assigned\n\n \n Requirements \n\n • Technical Communication\n, • Product Demonstration\n, • Customer Relations\n, • Diplomacy\n, • Matt Aptitude\n, • Negotiations\n, • Organization\n, • Professionalism\n, • Presentation\n, • Time Management\n, • Planning & Budgeting\n, • Closing Techniques\n\n \n Education/Training/Experience \n\n • Bachelor Degree preferred or Minimum 5 years related experience\n, • Heavy construction equipment sales experience required\n, • Prior experience with cold-calling\n, • Valid Drivers License – must meet insurance underwriting requirements\n\n \n We are an equal opportunity employer and prohibit discrimination and harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Overview \n Open due to internal promotion! Leadership program opportunity with an innovative, global company in NJ. Lots of perks too! The program is designed for high-performing professionals with the goal to move into the business. Participate in high profile projects with stakeholders and executives across the organization and then rotate into Finance, Accounting, Treasury, Operations or other areas. Successful candidates will have Big 4 audit experience and the CPA exam or parts passed. \n \n Responsibilities \n\n • Participate in the execution of financial and operational, integrated and process audits\n, • Partner with colleagues and clients, support groups, and other organizations to effectively manage projects\n, • Execute audit programs and work papers (including walkthroughs and sample testing)\n, • Collaborate in writing audit summaries to effectively outline concerns, risks, and recommendations\n, • Ensure goals are met for department projects\n\n \n Requirements \n\n • Bachelor's degree in Accounting\n, • 1-2 years’ work experience in internal audit, public accounting, or general accounting\n, • Big 4 experience preferred\n, • CPA or parts passed\n, • Excellent interpersonal skills, including the ability to interact effectively with stakeholders\n, • Strong time management skills and the ability to work within a team as well as independently\n\n

Job Description At Bridgewater Chevrolet, we view our service department as the heartbeat of our dealership, and our warranty team is the vital engine that keeps everything running smoothly. We are looking for a detail-oriented and positive individual to join us in Bridgewater, New Jersey, to help manage our warranty administration process. This isn't just about filing paperwork; it is about ensuring our customers receive the support they deserve and that our talented technicians are recognized for their hard work. You will be a key bridge between our service floor and the manufacturer, ensuring that every claim is handled with precision and care. We pride ourselves on a welcoming, supportive culture where your contributions directly influence the success of our service operations. If you enjoy solving puzzles, value organized systems, and want to be part of a team that truly cares about their work and their community, we invite you to grow your career with us. You will find that our shop environment is friendly, professional, and dedicated to achieving excellence together every single day. Responsibilities Review and submit warranty claims to the manufacturer, ensuring all documentation is accurate and complete. Communicate effectively with service technicians to gather necessary details regarding repairs for claim support. Track the status of all pending claims and follow up on any discrepancies or requests for additional information. Maintain organized records of all warranty transactions and correspondence to ensure compliance. Monitor warranty parts returns and credits to keep our inventory and accounting records balanced. Collaborate with the service management team to identify trends in claim denials and implement improvements in our submission process. Requirements Minimum of two years of experience in automotive service warranty administration. Strong knowledge of manufacturer warranty claims procedures and guidelines. Proficiency in dealership management software such as CDK or Reynolds and Reynolds. Meticulous attention to detail to ensure claim accuracy and minimal rejections. Understanding of automotive mechanical terminology. High school diploma or equivalent. Certification in relevant manufacturer training programs is a definite plus. Benefits Paid Time Off (PTO)###Flexible Schedule###Health Insurance###Dental Insurance###Vision Insurance###Life Insurance###Disability Insurance###Parental Leave###Career Growth Opportunities###Mon-Fri Schedule###

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job DescriptionDescription: JESCO is a premier dealer of heavy construction equipment and technology in the Northeast and Mid-Atlantic regions. We proudly represent John Deere, Wirtgen, Kleeman, Vögele, Hamm, Ditch Witch, Magni, Topcon, and many more products for purchase, rental, parts, and service. Family-owned and operated for more than 50 years, we are hiring to grow our award-winning company! Why JESCO: Join a growing team with a lucrative opportunity in equipment sales. Driven sales professionals will have the ability to achieve uncapped commissions. Apply today and start a long term career with the Down to Earth Equipment People of JESCO! The Territory Manager is responsible for the direct sale of new, used and rental of John Deere Construction & Forestry and Allied Products to assigned accounts. Responsible for all sales activities, from lead generation through quote and close. Build and maintain strong customer relationships focusing on long term mutual growth. Responsibilities • Track construction bid results to identify opportunities with existing accounts and prospects., • Determine customer needs and select applicable equipment configurations to meet customers' technical requirements and applications., • Perform trade evaluations on new quote opportunities., • Perform price calculations and generate customer quotations., • Write bid specifications that favor John Deere products for government agency bids & purchases., • Perform product demonstrations to prospective buyers while effectively communicating features and benefits of our products and services., • Perform Operation & Maintenance training on new equipment deliveries., • Attend and participate in trade shows, conferences and other industry related networking events., • Maintain awareness of pertinent client information including key influencers and decision makers, future purchasing plans, payment or financing preferences and fleet profiles., • Maintain records of customer communications, personal visitations and opportunities in the company CRM system., • Communicate any client information that may affect company decisions to appropriate department personnel as needed., • Assist in the resolution of outstanding accounts receivables or other client concerns or disputes., • Maintain knowledge of competitors’ products and identify and report intelligence on competitors pricing or marketing strategies to management and peers., • Submit a verity of sales reports as required including activities, opportunities, deals pending and adherence to goals., • Maintain current knowledge of JESCO products., • Understand and comply with established guidelines that ensure a safe and healthy work environment. Performance Measures • New and Used equipment Sales, • Rental Revenue, • Gross Profit Margin Achieved, • Market Share, • Number of New Accounts, • Call Frequency Achievement, • Trade Appraisal Detail & Accuracy, • Conflict Resolution, • Product & Selling Skills Learning, • Timely and Accurate Sales ReportingRequirements:, • Five years of proven outside sales experience., • Knowledge of construction and/or industrial equipment operation and applications., • Strong interpersonal and oral communication skills., • Strong presentation skills and professional appearance., • Excellent planning and organizational skills., • Strong written communication skills with exceptional presentation., • Negotiation and business acumen., • Proficiency in Microsoft Office products and CRM systems., • High energy, excellent self-motivation and work ethic. Physical Requirements: • Employee is expected to occasionally operate, demonstrate, climb up and down and walk around the equipment to sell to customers., • Employee should have the physical ability to evaluate equipment for trade., • This includes climbing on the equipment and operating the equipment., • Employee will be expected to drive a vehicle and cover a particular assigned territory., • Driving in a vehicle may be up to 80% of their day., • Employee must be able to travel by air to attend any Sales related or professional development events or as required by the company., • Employee should be able to lift and carry 50 pounds., • Candidates should be able to walk on uneven surfaces and terrain, work in construction site environments to meet with customers on jobsites. Certifications/Licenses: • Valid Driver's License – Candidates must meet JESCO’s outside insurance underwriting requirements. Benefits: • Medical, Dental & Vision Insurance, • 401(k) Plan + Company Match, • Paid Time Off (PTO), • Growth opportunities, • College Savings (529) Plan, • EAP (Employee Assistance Program) – includes three (3) free counseling sessions,·, • Paid Training· Family owned and operated, • Paid Company Holidays, • Discounts on products, • Base + Commission Pay Structure· Company vehicle. Pre-Qualifications for Employment At JESCO • JESCO participates in E-Verify to ensure that all of its employees are legally able to work in the United States., • All job offers are contingent upon the successful candidate completing and passing criminal and other background checks, a physical examination and drug testing, all done at the company’s expense., • All employees required to operate a company vehicle or their own personal motor vehicle as an essential function of their job must meet JESCO’s outside fleet insurance underwriting requirements. We are an equal opportunity employer and prohibit discrimination and harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #ZR

Job Description PEP BOYS / Mavis Tire - Automotive Assistant & Service Managers Competitive Weekly Pay + Weekly Incentive Compensation | Full-Time | Career Growth Opportunities Pep Boys is now part of the Mavis Tire family -- and we're growing our team! We're looking for experienced, full-time Automotive Assistant Managers and Service Managers to join Team Mavis at our automotive service, repair, and tire sales centers in the Bridgewater, NJ area. If you have automotive experience, strong customer service skills, and are ready to take the next step in your career, we want to hear from you. As part of the Mavis family, you'll join the nation's largest automotive service organization, with more than 4,000 locations and opportunities to grow your career. About the Assistant Manager Position As an Assistant Manager, you'll support the Store Manager with the day-to-day operations of the location while developing the skills needed to become a future Mavis leader. Responsibilities include: • Supporting efficient, safe, and effective store operations, • Scheduling and coordinating Mechanics and Technicians, • Managing outside orders and service workflow, • Ensuring quality and timely completion of customer vehicles, • Helping enforce company policies, procedures, and safety standards, • Supporting the team in delivering an excellent customer experience About the Service Manager Position As a Service Manager, you'll combine automotive knowledge, customer service, and sales skills to help customers make informed decisions about their vehicles while keeping the service operation running efficiently. Responsibilities include: • Assisting customers with tire selections and automotive service needs, • Recommending necessary undercar repairs and maintenance, • Coordinating the workflow of Mechanics and Technicians, • Staging and monitoring vehicle repair and maintenance work, • Communicating repair recommendations and services clearly to customers, • Supporting sales initiatives while delivering excellent customer service, • Ensuring repairs and services are completed accurately and on time Why Join Team Mavis? At Mavis, we know great leaders drive great teams. We offer: • Competitive weekly pay, • Weekly incentive compensation, • Medical, dental, and vision insurance, • 401(k) retirement savings plan with employer match, • Paid vacation, PTO, and holidays, • Life insurance, • On-the-job training and development, • A stable, team-oriented work environment, • Opportunities for career growth and advancement Qualifications To be eligible for an Automotive Assistant Manager or Service Manager position, you must: • Be at least 18 years of age, • Be legally authorized to work in the United States, • Have at least 1 year of experience and/or training in automotive parts or tire sales, automotive repair and maintenance, or an equivalent combination of education, training, and experience, • Have strong customer service and communication skills, • Be comfortable working in a fast-paced, team-oriented environment Ready to Take the Next Step in Your Career? APPLY NOW! Apply online at mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. Questions? Call our Recruitment Department toll-free at 844-375-3995. Join Pep Boys and Team Mavis-and grow your automotive career with us! Mavis is an Equal Opportunity Employer. Job Posted by ApplicantPro \nCompany Description Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value. We're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today! Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value.\r\n\r\nWe're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!

Job DescriptionA leading client is seeking a Department Administrator for the Electrical and Computer Engineering Department. This is a temporary position for 6 months. After 6 months there will be a review of the department needs and the position may get extended or posted for a permanent hire. Duration: 6 months Hours: Monday through Friday 9:30 am – 5:30 pm Location: Piscataway NJ Pay rate: $29/hr Duties include but not limited to; • ECE Department Support such as requisitions for lab equipment, supplies. Maintain parts stock room, equipment inventory, keys and swipe access. Work with Federal Work Study staff members, and monitor progress., • Assist with the training of Teaching Assistants (TAs) in the instructional labs. Prepare experimental setups and supplies for teaching lab experiments. Maintain the teaching laboratory probe kits, soldering kits, and part bins., • Facilities Coordination- coordinate lab safety training, laboratory audits, Right-to-Know Law., • Public Events Coordination – such as Engineering open houses, tours and events. Assist with poster printing service for events., • Other duties as assigned.Requirements: Bachelor’s degree in Electrical Engineering or Computer Engineering. Must be able to work in an ECE lab and/or Physics lab. Detail oriented, organized, fast learner and proactive. Ability to guide students and work with a large student group, juggle around multiple student demands in the lab and maintain other administrative duties. Strong communication skills. Pay Details: $29.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to https://www.adecco.com/en-us/candidate-privacy The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description JOB DESCRIPTION: • Diagnose repair needs and perform designated repairs on company and customer-owned marine propulsion engines, auxiliary engines, generators, and related vessel systems as directed., • Perform necessary troubleshooting and notify Service Manager of outstanding issues., • Expected to complete tasks with no/limited supervision., • Demonstrates extremely well developed technical and troubleshooting skills with strong analytical problem-solving skills in their work unit., • Demonstrates the need for continuous self-development and seeks every opportunity to improve their personal, technical, and interpersonal skills., • Verified findings, review readings of gauges and procedures and compare to manufactured specs., • Install, replace, rebuild, or repair the parts and/or equipment in a timely manner and according to specifications, • Consistently follows all Foley safety policies and procedures to include all Personal Protective Equipment being worn at all times, as well as contamination control guidelines., • Willing to respond to after-hour emergency calls as directed by supervisor., • Test the part or equipment and perform quality checks after work is complete., • At the end of shift, secure all equipment and machinery and complete all required paperwork., • Basic computer skills and good interpersonal and communications skills., • The candidate must have a clean driving record and current driver’s license. RECOMMENDED QUALIFICATIONS: • 3+ years of experience servicing marine diesel engines, marine generators, propulsion systems, heavy equipment, or related power systems. Caterpillar marine experience is preferred but not required., • Must be able to multitask., • Assist parts department in researching and ordering needed parts., • Strong Computer skills preferred, knowledge of SisWeb and ET. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Job Description Position Description - Crew Leader: The Crew Leader is responsible for directly supervising a crew while on the job site and ensuring the crew works safely and efficiently while delivering quality jobs on time. This position is responsible for developing and training crew members, planning, assigning and directing work, managing and maintaining material and equipment, and addressing and resolving customer issues. This position reports directly to the Operations Manager. Principal Responsibilities: • Work with management to create schedules and follow job specifications, including materials and timelines., • Organizes, supervises, leads and trains employees to complete projects within established guidelines and timeframe., • Ensures contractual obligations are fulfilled in a manner that is in line with proper horticultural practices., • Complies with equipment preventative maintenance program., • Inspects each job site weekly and maintains punch lists given by manager while on site., • Identifies ways to improve work processes, efficiency, and quality., • Communicates with onsite clients as outlined in communication plan., • Responds properly to the client’s requests; follows up to make sure their needs have been met., • Keeps manager aware of all client concerns and communication on the job site., • Maintains safe working conditions on job site at all times; follows and implements all company safety guidelines. Education & Experience Qualifications: • Minimum of two years of professional landscape maintenance experience., • High school diploma or GED required., • Current State Technician and/or Applicator license preferred but not required., • General knowledge of irrigation systems., • General knowledge of horticultural and maintenance practices. Skills & Abilities Qualifications: • Must be able to effectively communicate in English; bilingual in Spanish highly preferred., • Ability to train others and exercise leadership skills., • Demonstrates dependability; consistently at work and on time, responds to management direction and commits to the required hours for job completion that will vary based on weather/season., • Strong interpersonal skills with the ability to solve conflict while keeping emotions under control., • Ability to plan, organize and direct a team in a manner that uses time efficiently., • Has the aptitude to identify and act on opportunities to help and support work efforts of the team., • Can safely operate and maintain all equipment used for landscape maintenance., • Valid State Driver’s License with clean driving record. Environmental Considerations: • Works around hazardous equipment with moving mechanical parts., • Works outside in all weather conditions, including cold, heat, temperature swings., • Works around excessive noise from machines, requiring hearing protection., • Works in corridors with uneven terrain., • May be exposed to nature, i.e. irritating plants and biting or stinging insects., • May be exposed to fumes/odors, dust/mites, chemical and/or waste hazards., • May be exposed to dogs and other animals., • Work may be performed at varying heights above ground. Physical Requirements: • Must have the ability and endurance to perform tasks for at least 8-hour periods., • Must understand and demonstrate proper safety procedures, abiding by all OSHA regulations, with the ability to respond to emergency situations in a timely manner., • Must be able to maintain attention and concentration for extended periods of time., • Must be able to wear PPE as necessary., • Must be able to enter and exit a vehicle numerous times a day. Key: Rarely = less than 10% Occasionally = up to 33% Frequently = up to 66% Continuously = 67% to 100% Rarely: Climbing poles, color vision. Occasionally: Sitting, kneeling, crawling, climbing ladders, balancing, lifting up to 50lbs. Frequently: Stooping, squatting, sense of touch, climbing on/off truck, gripping, reaching, range of motion, lifting, carrying, pushing, pulling, climbing stairs, lifting over 10lbs to 50lbs. Continuously: Standing, walking, body twisting, manual dexterity, speaking clearly, seeing distant, seeing, reading, hearing – speech range, lifting up to 10lbs. Individuals with a disability who desire a reasonable accommodation can contact the ADA Coordinator by calling 1-833-222-3066. We partner with the Department of Homeland Security/U.S. Customs and Immigration Service to e-Verify all newly hired employees. An Equal Opportunity Employer, including disabled and vets

Job Description Bentley Edison, part of the renowned Murgado Automotive Group, is a top dealership in Edison, NJ. We proudly represent some of the most iconic automotive brands in the world, providing exceptional sales and customer service experiences. As a family-oriented business, we value our employees and believe in promoting a positive, inclusive, and growth-oriented work culture. If you’re passionate about cars and delivering outstanding customer service, we invite you to join our team! Position Overview: Bentley Edison is looking for motivated and dynamic Automotive Sales Associates to join our thriving dealership. As a Sales Associate, you will help our customers find the perfect vehicle, deliver excellent customer service, and build lasting relationships. Whether you’re experienced in auto sales or looking to start your career, we offer the tools, training, and support you need to succeed in the fast-paced world of automotive sales. Key Responsibilities: Greet and assist customers in the showroom and online with enthusiasm, professionalism, and a customer-first mindset. Understand customer needs and preferences to recommend the right vehicles from our Bentley and Pre-Owned Vehicle lineup. Conduct test drives, vehicle walkarounds, and provide detailed explanations of features, options, and warranties. Use your knowledge and sales skills to close sales deals while ensuring the customer has a positive, no-pressure experience. Build strong relationships with customers and maintain follow-up communication to promote repeat business and referrals. Stay up-to-date with product knowledge, new vehicle features, and current promotions. Assist with vehicle inventory management and ensure vehicles are clean, well-maintained, and ready for sale. Work closely with the finance and service teams to ensure a seamless sales process. Meet or exceed sales goals and performance standards. Qualifications: Prior automotive sales experience is a plus but not required. Strong customer service and communication skills, both in-person and over the phone. A passion for cars and helping customers find the right vehicle to fit their needs. Self-motivated and driven to meet or exceed sales goals. Positive, outgoing attitude with a willingness to learn and grow in the automotive sales industry. Ability to work a flexible schedule, including weekends and holidays. Must have a valid driver’s license and a clean driving record. Bilingual in English and Spanish is a plus (but not required). What We Offer: Competitive compensation with salary + commission. Health, Dental, and Vision Insurance. 401(k) retirement plan with company match. Paid time off and holidays. Employee discounts on vehicle purchases, parts, and service. Ongoing training, professional development, and growth opportunities within the Murgado Automotive Group. Friendly, supportive team environment in a state-of-the-art dealership. Why Join Us? At Brickell CJDR, we are dedicated to helping you build a successful and rewarding career. We invest in our team members, providing continuous training, support, and the opportunity for advancement. Whether you’re new to the industry or a seasoned sales professional, you’ll have the chance to thrive in a dynamic, high-energy environment. If you are passionate about cars and people, Brickell CJDR is the perfect place for you to grow and succeed! How to Apply: If you’re ready to accelerate your career in automotive sales, we want to hear from you! Please submit your resume at Bentley Edison. We look forward to having you on our team! Murgado Automotive Group is an equal opportunity employer. Murgado Automotive Group does not discriminate in employment on account of race/ethnicity, color, religion, national origin, gender, sexual orientation/transgender status, age disability, martial/parental status, citizenship status, military status, political affiliation and/or beliefs, pregnancy, order of protection status or other non-merit status. We are an employer who participates in the E-verify program with the Department of Homeland and Security. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionDescription: JESCO is a premier dealer of heavy construction equipment and technology in the Northeast and Mid-Atlantic regions. We proudly represent John Deere, Wirtgen, Kleemann, Vögele, Hamm, Ditch Witch, Magni, Topcon, and many more products for purchase, rental, parts, and service. Family-owned and operated for more than 50 years, we are hiring to grow our award-winning company! Join the Down to Earth Equipment People! Learn about the vast world of construction equipment and build a lucrative future with JESCO Inc. Nothing runs like a Deere, but JESCO certainly keeps it in gear! Sales Managers are responsible for the efficient and profitable sales of all products and equipment. Oversees the activity of the sales staff with attention given to servicing the interest and needs of every customer. Advises and makes recommendations to the V.P. and President with the respect to the best interest of the sales department. Responsibilities: • Prepare reasonable annual objectives for the sales department. These objectives should be reviewed and maintained on a monthly basis, • Sees that authorized sales plans and programs are carried out by the sales department with respect to profit, volume, product mix and coverage, • Insures availability of adequate manpower at all times. The sales department should be available to our customers Monday through Saturday., • Make yourself available for unconventional business hours, • Works with sales consultants in the field to develop maximum selling effort, makes territorial changes as necessary, • Initiates necessary action to insure proper technical and service department support for the sales department, coordinates warranty expense program with service manager, • Participate, organizes and conduct training programs and sales meetings, or arrange for such activities to be performed by qualified personnel, • Coordinate all company trades and secure financing arrangements with regard to allowance on trade-ins, (With the V.P. Sales and/or President) and insures that the target profit goals are met, • Periodically evaluates each salesman’s performance and planned goals. Provide guidance and direction to assist them in their professional development, • Maintain proper records, submit necessary reports, check customer credit status and controls expenditures along with other required administrative details, • Provide to the sales force any necessary documents on reporting on daily activities, use of time more effectively and efficiently and follow up procedures for potential customers., • Resolve customer complaints in a prompt and efficient manner to minimize customer inconvenience and maximize the company business image with the customer, • Provide effective sales presentations to support the dealership's sales goals., • Understand and support the company's sales policies and procedures to provide proper and effective service to all customers., • Stay current on technological changes in industry; understand equipment terminology and report competitive information to the Senior V.P. and President., • Perform other duties as assignedRequirements:, • Technical Communication, • Product Demonstration, • Customer Relations, • Diplomacy, • Matt Aptitude, • Negotiations, • Organization, • Professionalism, • Presentation, • Time Management, • Planning & Budgeting, • Closing Techniques Education/Training/Experience • Bachelor Degree preferred or Minimum 5 years related experience, • Heavy construction equipment sales experience required, • Prior experience with cold-calling, • Valid Drivers License – must meet insurance underwriting requirements We are an equal opportunity employer and prohibit discrimination and harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. #ZR

Job Description AHEAD builds platforms for digital business. By weaving together advances in cloud infrastructure, automation and analytics, and software delivery, we help enterprises deliver on the promise of digital transformation. At AHEAD, we prioritize creating a culture of belonging, where all perspectives and voices are represented, valued, respected, and heard. We create spaces to empower everyone to speak up, make change, and drive the culture at AHEAD. We are an equal opportunity employer, and do not discriminate based on an individual's race, national origin, color, gender, gender identity, gender expression, sexual orientation, religion, age, disability, marital status, or any other protected characteristic under applicable law, whether actual or perceived. We embrace all candidates that will contribute to the diversification and enrichment of ideas and perspectives at AHEAD. AHEAD is seeking an Associate Technical Consultant to join the Storage Delivery Practice and support the implementation and operation of enterprise data center infrastructure. This customer-facing role helps translate business and technical requirements into practical solutions and contributes to delivery activities from planning and preparation through implementation and knowledge transfer. The ideal candidate is detail-oriented, accountable, solutions-focused, and comfortable collaborating with customers and internal teams. Limited travel may be required to support data center deployment projects. Key Responsibilities: • Install data center hardware, including racking, stacking, and cabling, to support enterprise requirements for performance, availability, recoverability, scalability, and operational simplicity., • Apply basic configurations to physical infrastructure, including PowerMax, PowerFlex, PowerEdge servers, Cisco switches, Pure FlashArray, FlashBlade, and related platforms., • Configure and deploy SAN infrastructure, including Cisco and Brocade Fibre Channel switching., • Create and maintain technical documentation, including solution designs, implementation plans, operating procedures, and knowledge-transfer materials., • Serve as a supporting technical point of contact during delivery engagements, status meetings, cutovers, and escalation events., • Collaborate with project managers, architects, account teams, and customer stakeholders to align scope, timelines, and technical outcomes., • Support post-implementation knowledge transfer, issue review, and recommendations for continuous improvement., • Support delivery consistency, technical quality, and customer satisfaction while learning from senior team members and mentors., • Stay current on storage, cloud, and infrastructure trends and contribute practical ideas to improving delivery methods and client environments.Required Qualifications:, • Hands-on experience supporting enterprise infrastructure delivery, preferably in consulting, professional services, or complex customer environments., • Ability to diagnose and resolve connectivity issues across systems, hosts, switches, and related infrastructure., • Strong written, verbal, and technical documentation skills., • Ability to manage competing priorities and work effectively in client-facing delivery environments., • Working knowledge of Linux, Unix, and Windows operating systems., • Familiarity with automation and orchestration concepts, with experience using one or more tools such as Python, Bash, PowerShell, JavaScript, Ansible, Terraform, or Jenkins.Success Profile:, • Owns assigned technical tasks and contributes as a reliable member of the Storage Delivery team., • Delivers high-quality work with strong attention to execution, risk awareness, and customer outcomes., • Builds credibility with customer teams and internal delivery, architecture, and sales stakeholders., • Balances hands-on technical execution with customer service, clear communication, and business awareness., • Demonstrates a growth mindset and a commitment to continually developing technical skills, capabilities, and knowledge., • Commits to obtaining storage certifications that are relevant to the practice and support both individual development and practice success., • Demonstrates a strong desire to grow professionally, advance their technical career, and contribute to the success of the practice.Work Environment: The Associate Technical Consultant works within the Storage Delivery Practice to support project-based delivery for new data center deployments, infrastructure upgrades, and system moves. The role may require after-hours and weekend work based on project schedules or client needs, as well as limited travel for client engagements. Role Summary: This opportunity is ideal for a hands-on storage and server professional who can support enterprise deployments while building trusted relationships with customers, project teams, and internal stakeholders. The compensation range indicated in this posting reflects the On-Target Earnings (“OTE”) for this role, which includes a base salary and any applicable target bonus amount. This OTE range may vary based on the candidate’s relevant experience, qualifications, and geographic location. Why AHEAD: Through our daily work and internal groups like Moving Women AHEAD and RISE AHEAD, we value and benefit from diversity of people, ideas, experience, and everything in between. We fuel growth by stacking our office with top-notch technologies in a multi-million-dollar lab, by encouraging cross department training and development, sponsoring certifications and credentials for continued learning. USA Employment Benefits include: - Medical, Dental, and Vision Insurance - 401(k) - Paid company holidays - Paid time off - Paid parental and caregiver leave - Plus more! See benefits https://www.aheadbenefits.com/ for additional details. Use of AI: We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, assessing responses, or to capture recordings and create transcriptions or summaries during interviews. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please refer to the Candidate Privacy Notice or contact us at privacy@ahead.com. You may opt-out of the review or analysis of your application and resume by AI tools by using the General Application. Please include the role you wish to apply for in the Additional Information field. You may also choose to opt-out of recording and transcription at any time, including after joining an interview. Candidates will not be penalized for choosing to opt-out. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description The Automated Inspection Programmer develops, maintains and continuously improves measurement systems and equipment to ensure the quality of products and processes. The Automated Inspection Programmer is expected to: · Complete NPD quality projects on time · Review customer specification changes and revise supporting documentation within designated timeframe Metrology 50% · Programs automated inspection equipment to o Optical Gage Products Smart Scope § Measuremind § Zone 3 o Keyence IM & VR o Mitutoyo CMM § MCOSMOS o Starrett § M3 · Assists in design and development of fixtures and gages used for inspection · Performs Gage R&R studies and other measurement systems analysis · Performs first article inspections and process capability studies to support manufacturing and development · Works independently, with New Product Development and Process Engineers to deliver programs and information on the measurement of parts and gages with minimal supervision. · Performs engineering capability and stability studies · Applies GD&T Y14.5 standard and other measurement techniques to review and understand part print design and intention. · Assists with providing information regarding measurement techniques used on products to customers and suppliers as needed · Ability to lead metrology initiatives at moderate complexity. Research & Analysis 25% · Performs validation protocol development & execution for metrology equipment & test methods. · Determines root causes of measurement system failures and makes appropriate modifications in accordance with company quality system requirements Reporting & Documentation 25% · Assists with creating work instructions for the Quality Assurance Department. · Maintains all divisional quality inspection records · Creates and updates inspection drawing criteria for new and revised components This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is required. Bachelor’s degree is preferred. · At least 5 years of quality experience in a manufacturing environment or equivalent combination of education and experience is required. · Experience in programming wide variety of measurement systems. LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · Program Optical Gage Smart Scope products in Measuremind · Program Optical Gage Smart Scope products in Zone3 · Program Keyence IM and VR · Program Mitutoyo in MCOSMOS · Program Starrett in M3 · Read and interpret engineering drawing and specifications · Read and interpret GD&T Y14.5 · Gage Design · Blueprint Reading · APQP · MSA · PPAP · SPC · Statistical software · MS Office Suite OTHER SKILLS · Verbal communication · Written communication · Interpersonal skills · Manual dexterity · Spatial dexterity · Organizational skills · Multitasking · Problem Solving While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must frequently lift, push, pull, carry and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock. The employee is occasionally exposed to wet and/or humid conditions and odors, dusts, mists, fumes and/or airborne particles. The noise level in the work environment is usually moderate. Compensation & Benefits The anticipated hiring range for this position is $79,000 to $88,000 annually. Actual compensation within this range will be determined based on relevant skills, experience, education, and other job-related qualifications. Based on a candidate’s qualifications and experience, they may be considered for other available opportunities at a different level. Compensation for any such position would be based on the requirements and compensation range applicable to that position. MICRO offers a comprehensive benefits package to eligible employees, including medical, dental and vision insurance; life and disability insurance; a 401(k) retirement plan; paid time off; paid holidays; and other company-sponsored benefits. Eligibility and benefit offerings are subject to the terms of the applicable plans and company policies.

Job DescriptionFerrari of Central New Jersey, part of one of the best automotive groups (Murgado Automotive Group) in the country, is an exclusive highline dealership and a beacon of excellence in the world of fine automobiles. We cater to the most discerning clientele, setting the gold standard for highline and customer experience. Join our esteemed team and be part of a mission to deliver nothing less than perfection. We care about you and your dreams, ambitions, and goals. And the opportunity for growth is endless. We only promote from within our company and the sky is the limit. Come join our team! Summary Ferrari of Central New Jersey is seeking an accomplished and dynamic Pre-Owned Sales Manager to lead our pre-owned vehicle department. As a Pre-owned Sales Manager, you will play a pivotal role in ensuring that our preowned vehicle offerings match the elevated standards of our elite clientele. If you have a proven track record in highline automotive sales management, understand the needs of the most discerning clients, and can discreetly curate an exclusive collection, we invite you to explore this exclusive opportunity. Responsibilities Lead and manage the preowned vehicle department with a commitment to discretion and excellence. Oversee the curation and presentation of our preowned vehicle collection to match the highline standards our clients expect. Collaborate with buyers to ensure access to the most exclusive preowned vehicles. Establish and maintain relationships with exclusive suppliers and collectors. Monitor department performance, ensuring client satisfaction and financial objectives are met. Maintain meticulous records and documentation while upholding strict confidentiality. Develop and implement department policies and procedures that match the highline standards our clients expect. Manage department budgets and financial goals while upholding the highest ethical standards. Qualifications Minimum of 5 years of experience in highline preowned automotive sales, with at least 2 years in a management role. Proven leadership and team management skills. An understanding of the highline preowned market and the ability to discreetly curate an exclusive collection. Exceptional communication and interpersonal abilities while maintaining strict confidentiality. Detail-oriented and exceptionally organized, with a focus on efficient and discreet operations. A track record of achieving and exceeding high-performance standards. A passion for excellence, a commitment to discretion, and a deep understanding of the needs of the most discerning clientele. Benefits Competitive salary and performance-based bonuses. Comprehensive health, dental, and vision insurance. 401(k) retirement plan with company match. Paid time off and holidays. Employee discounts on vehicles and services. Opportunities for professional development and career advancement. Ongoing training and professional development opportunities in highline preowned automotive sales. An exclusive work environment within a prestigious organization. Opportunity for continued growth and advancement within our highline dealership. If you have a proven track record in highline preowned automotive sales management, understand the needs of the most discerning clients, and can curate an exclusive collection, we invite you to explore this unique opportunity as a Preowned Sales Manager with Ferrari of Central New Jersey. Please submit your updated resume and a cover letter highlighting your relevant experience and why you would be a great fit for this role. We appreciate your interest in this position and will reach out to qualified candidates for further discussions. Murgado Automotive Group is an equal opportunity employer. Murgado Automotive Group does not discriminate in employment on account of race/ethnicity, color, religion, national origin, gender, sexual orientation/transgender status, age disability, martial/parental status, citizenship status, military status, political affiliation and/or beliefs, pregnancy, order of protection status or other non-merit status. We are an employer who participates in the E-verify program with the Department of Homeland and Security. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses and identifying potential inconsistencies or verification signals in application materials based on available information. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Description JOB DESCRIPTION: • Perform high-quality repair and maintenance on Caterpillar equipment., • Diagnose and troubleshoot mechanical, electrical, and hydraulic issues., • Expected to complete tasks with no/limited supervision., • Remove, install, disassemble, and assemble components., • Adhere to safety standards to include contamination control and HAZMAT regulations., • Verified findings, review readings of gauges and procedures and compare to manufactured specs., • At the end of shift, secure all equipment and machinery and complete all required paperwork., • Willingness to learn and adapt to new technologies and procedures. Paint prep and painting capabilities This is a 2nd shift position scheduled Monday - Friday 3:30pm - 12:00am RECOMMENDED QUALIFICATIONS: • Experience with Cat/Non-Cat construction equipment., • Must be able to multitask., • Assist parts department in researching and ordering needed parts., • Strong Computer skills preferred, knowledge of SisWeb and ET is a plus., • Excellent communication and interpersonal skills., • Well-developed technical and troubleshooting skills with strong analytical problem-solving skills. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job DescriptionDescription: JESCO is a premier dealer of heavy construction equipment and technology in the Northeast and Mid-Atlantic regions. We proudly represent John Deere, Wirtgen, Kleeman, Vögele, Hamm, Ditch Witch, Magni, Topcon, and many more products for purchase, rental, parts, and service. Family-owned and operated for more than 50 years, we are hiring to grow our award-winning company! Why JESCO? JESCO offers benefits after 30 days of employment, including Medical, Dental, Vision and Prescription. Enroll into a generous 401k option after 6 months. JESCO is a mid-sized company that continues to expand and grow. Join a great team that offers career advancement and start your career with JESCO! Establishes a knowledge center within the dealer organization to improve product resolution cycle times. Enables improved communication, sharing of best practices among all servicing locations. Works with the Service Managers/Service Advisors to help solve problems. Helps to improve Technician’s diagnostic and repair abilities resulting in less downtime and reduced costs for our customers. Conducts preliminary investigations into machine problems using CCMS, Machine Dashboard and Expert Alert information, external information sources, previous experiences and knowledge of machine systems. Responsibilities • Resource for Technicians, Service Managers/Service Advisors and Parts Leads to help resolve critical product problems by assisting in diagnosis and repair and sharing of best practices, • Ensures all necessary information is documented within the CCMS case prior to submission to John Deere, • Coordinates CCMS cases between Technicians and John Deere CCMS factory support as needed, • Works with John Deere as a partner in quality to help identify emerging product quality concerns and support problem resolution, • Identifies, communicates and executes continuous process improvements in Service and Parts departments to ensure internal and external customer satisfaction, • Opens work orders and provides estimated labor and parts requirements when possible for technicians to resolve issues, • Maintains up to date technical knowledge of engine, hydraulics, and electrical systems and repair manual schematics, • Assists in identifying Technical training needs or gaps by communicating with location Service Mangers / Service Advisors, • Prepares and analyzes Service department reports; uses data to help drive improvement and growth, • Maintains a positive and professional working relationship with peers, management, and support resources, with a constant commitment to teamwork and exemplary customer service, • Ensure that company’s reputation and image in the community is consistent with company core values, • May participate in Service EDUCATE Training programs required for the development of skills and knowledge, • Operates and maintains vehicles, tools and equipment required to perform job responsibilities, • Maintains a clean work area and performs work in a neat and orderly fashion, • Follows all safety rules and regulations while performing work assignments, • Maintains knowledge of John Deere and competitive productsRequirements:, • 5+ years of experience in Service and Parts department operations; demonstrated experience consistently meeting performance metrics preferred, • Experience with basic computer functions; experience using Service ADVISOR™, Parts ADVISOR™, or other computer based diagnostic repair tools preferred, • Experience with the mechanical, electrical and hydraulic systems used in off road, construction, lawn, or heavy equipment, • Experience communicating effectively, • Experience working with customers, • Experience analyzing and interpreting data and reports, • High School Diploma, GED, or equivalent experience required; Associates degree preferred We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Job Description JOB DESCRIPTION: • Provide leadership and oversight of Parts Department operations, ensuring compliance with company policies, operational guidelines, and business objectives., • Manage core processing activities, including reconciliation, policy adherence, issue resolution, and coordination with Accounting., • Oversee Corporate Parts Administration functions, including back-order expediting, exchange coordination, PCC ordering, and administrative support teams., • Recruit, develop, evaluate, and plan staffing needs to ensure a high-performing and well-supported team., • Monitor departmental financial and operational performance, including key metrics, resource utilization, and process efficiency., • Lead back-order escalation efforts, partnering with internal teams, dealers, and customer-facing personnel to resolve critical customer issues., • Maintain Parts Office operations, coordinate quarterly TEPS returns, and oversee novelty store inventory and customer support activities., • Drive continuous improvement through performance reviews, employee development, cross-functional communication, and participation in business initiatives. RECOMMENDED QUALIFICATIONS: • High School Diploma or equivalent required., • Minimum 5 years’ experience in Parts Operations, Inventory and Warehouse Management with progressive supervisory experience and/or equivalent combination of training and experience which provides the required knowledge, skills and abilities., • Strong knowledge of warehouse operations, inventory management, shipping logistics, and warehouse management systems (WMS)., • Experience with ERP systems and transactional processes, with proficiency in Microsoft Office Suite (Excel, Word, PowerPoint, and Teams)., • Excellent communication, collaboration, and customer service skills, with the ability to effectively work across teams and stakeholders., • Demonstrated problem-solving, analytical, and organizational skills, with strong attention to detail, adaptability, and the ability to manage multiple priorities in a fast-paced environment. Equal Opportunity Employer Foley, Incorporated does not discriminate against any person applying for employment based on race, color, sex, age, religion, national origin or citizenship status, physical or mental disability, marital status, sexual orientation, gender identity, status as a covered Veteran, or any other legally protected status. This contractor and subcontractor shall abide by the requirements of 41 CFR 60.300.5(a) and 41 CFR 60.741.5(a). These regulations prohibit discrimination against qualified individuals on the basis of disability and protected veteran status, and require affirmative action by covered prime contractors and subcontractors to employ and advance in employment qualified individuals with disabilities and protected veterans.

Job Description Date 05/2018 Location 1300 Airport Road, North Brunswick NJ Title Supervisor, Packaging Department Packaging Reports to Manager, Packaging FLSA (Exempt or Non-Exempt Exempt Role Overview The Packaging Supervisor position is responsible to assist with planning, coordinating, and managing all activities of those employees in the packaging department. This person will demonstrate a high level of creativity and independence in the design and development of new or improved packaging processes, systems, prototypes, and projects from concept to production. Safety, sanitation, housekeeping, GMP standards, problem solving ability as well as good employee relations are considered key elements to success. They will need to coordinate and partner with other departments to maintain schedules and effect necessary changes and revisions. Areas of Responsibility • Ensures that timelines are met by distributing workload in accordance with changing priorities., • Ensures operation of equipment by coordinating, preventative maintenance, repairs; and evaluating new equipment and techniques., • Responsible for packaging production employees including mechanical support staff., • Oversees day to day operation of filling and packaging environment., • Coordinate activities and assist in setting priorities of mechanics and warehouse materials handlers to keep the production lines running efficiently and consistently., • Communicate all packaging activities with the Lead QA inspector to proper QA support is available., • Create and issue required packaging paperwork to line leaders and audit it daily for completeness and accuracy., • Prepare for the new shift by reviewing all entries to the log, packaging line status and issues., • Conduct routine meetings with departmental employee groups to provide guidance and to review problems, new procedures, and customer issues., • Works closely with Quality and Planning department to execute production plan., • Evaluates/solves production problems by reviewing the area of concern, developing potential solutions, technically evaluating, or testing the solutions, and preparing recommendations for management., • Maintain a work environment which fosters teamwork and supports the company’s efforts to continuously improve processes., • Prepares production reports and variance explanations, and accurately complies and files, Inventories, and order production supplies. Quality • Participate in any investigation for a deviation involving a batch record., • Maintain proper gowning and hygiene to ensure integrity of the product as per cGMP’s and company policies., • Follow batch records, SOP’s, and cGMP guidelines to ensure product specifications and tolerances are met., • Ensures full compliance with Company policies, procedures, GMP’s, Ethical Business Practice, and SOPs at all times., • Ensures documentation such as operation logs, batch records, etc. are fully completed, signed and in compliance with company standards and regulatory requirements., • Complete necessary Activity Reports for management., • Monitor the flow of paperwork from Receiving to Inventory Control Specialist for timely data entry., • Resolve discrepancies with shipping, invoices, packing slips, and receiver reports., • Ensure products are staged for counting and inspection., • Ensure products are stored properly to conserve space and comply with safety procedures. People • Foster a collaborative environment in which diverse backgrounds are respected and valued., • Establish and maintain effective relationship with your peers, team, and senior managers in order to communicate effectively., • Provides clear direction & expectations for direct reports and assures that tasks & responsibilities are clear., • Sets goals and objectives in alignment with the organization for self and direct reports: Creates action plans, sets milestones, and delivers progress reports and developmental plans for team members., • Develop employees that contribute to the daily success of the line and can be successful in the supervisor’s absence., • Maintains open lines of communication with employees, peers, and management., • Assumes responsibility for the efficient, timely, and accurate completion of warehouse functions, • Learns and understands specific manufacturing operations sufficiently and can provide support in other areas as needed., • Evaluates performance of employees and creating corrective action plans where appropriate., • Assists with personnel decisions including hiring, terminations, attendance management, wage decisions, transfers, and promotions., • Interpret and explain the policies of the USPL Handbook so employees can understand the application of each policy as well as management’s purpose for each policy., • Apply all company policies fairly and consistently across departments and develop a relationship of trust and transparency with their employees., • Identify strengths and weaknesses of all associates on their team to ensure optimal performance; knows which employees they can assign additional tasks to, and which need closer scrutiny. Mechanical • Perform moderate to complex adjustments, maintenance, and repairs to packaging equipment., • Perform changeover and set-up of packaging machines as well as troubleshoot mechanical and basic electrical systems and make appropriate repairs to machines., • Perform daily preventative maintenance on plant equipment such as packaging equipment, conveyors, and compressors., • Assist on equipment installations within the plant structure. Complete work orders to repair machinery., • Read and interpret equipment manuals to perform required maintenance and service., • Diagnose problems, replace, or repair parts, test and make adjustments., • Use a variety of hand and power tools, electric meters, and material handling equipment in performing duties., • Set up full line configurations of multiple pieces of equipment, independently., • Interact with management to assist in new project quotation generation by providing input on equipment choices, potential capital purchases or improvements and estimated output., • Detect faulty operations, defective material, and report those and any unusual situations to proper supervision. Other Responsibilities Including Safety: • Responsible for ensuring each employee works in a safe and responsible manner in order to create an injury-free and incident-free workplace. Complies with all job-related safety and other training requirements., • Keeps management informed of area activities and of any significant problems., • Responsible for maintenance of warehouse equipment, providing both preventive maintenance programs and communicating all necessary repairs to Director of Facilities., • Responsible for warehouse safety programs to provide a safe and clean workplace for employees and within the regulations of all OSHA local and state regulations., • Ensure all associates are trained and following all standard operating procedures., • Works extended hours and occasional weekend overtime., • Other duties as assigned. Requirements Education & Qualification: • BA degree and/or 4+ years Supervisory experience, • Minimum of two (2) years of work experience in nutritional’s, supplements, food, or pharmaceutical manufacturing industries is preferred., • Hands on experience with any of the following processes: Blending/Granulation, Tablet Compression and/or Film Coating, Encapsulation, or Pharmacy/Pre-Weigh Dispensing. Certifications, Licenses, Credentials: • N/A Skills & Ability • Demonstrates ability to work in a team and assist others., • Bi-Lingual in Spanish or Hindi is a plus., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards etc., • Mechanically inclined to understand inner workings of equipment., • Demonstrates the ability to read and write basic English in order to be able to understand the industry regulated instruction sheets. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on production floor a minimum of 6 hours per shift, • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool., • Must be able wear all PPE including lab coat, face mask, booties, gloves, safety glasses/goggles and respirators. Work Environment (Office, Warehouse, temperature extremes, etc.): • Work is regularly performed inside a manufacturing environment where temperatures can be moderate, exposure to dust, odors, noise and fumes. The noise level is usually moderate. Employee can be exposed daily to chemicals and cleaning agents. 2nd shift 3:15 PM to 11:45 PM

Job DescriptionBenefits: • 401(k), • Bonus based on performance, • Employee discounts, • Health insurance, • Paid time off At Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for Automotive Service Assistant Managers to assist managing and direct all service department activities of a retail store engaged in selling tires and related automotive parts and mechanical services. This position is Assistant Store Manager developmental role. Midas is committed to training our associates and promoting from within the organization. Responsibilities As a Midas Automotive Service Manager, you will manage and direct all automotive and general service technicians in the operation of the shop, including: · Help ensures a safe, secure, and trustworthy work environment. · Liaise between managers, customers, and employees. · Fill in for Manager in times of absence. Make executive decisions, hold meetings and provide accountability. · Support ongoing learning and development of team members. · Establishes strategic goals by gathering information from reporting documents. · Define objectives, identifies, and evaluates trends and options, chooses a course of action and evaluates outcomes. · Lead by example, manage, and train team while keeping in tune with our companies’ vision, purpose, core values and employee creed. · Help ensure that all policies and procedures are being followed by all employees. · Deliver exceptional customer service while listening and consulting customers. · Oversee complete vehicle inspection and then make comprehensive recommendations by building computerized repair orders and sourcing parts. · Ability to discuss pricing estimates with customers as well as promoting shop service specials and financing options. · Monitor the quality of all vehicles being signed out. · Ability to successfully supervise up to 10 employees. · Closely monitor inventory levels while managing product ordering and receipt. · Maintaining a clean and organized job site. · Other duties as assigned. Qualifications • A minimum of 1 years of store or service assistant manager experience, • General automotive knowledge, • Excellent customer service disposition, • Good communication skills, • Leadership ability, • Team building skills, • Ability to work a flexible retail schedule including weekends, evenings and holidays, • Valid driver’s license Qualities that make you stand out from the rest: · Attention to detail and organizational skills · Understanding the current performance of the location and asks for assistance if needed. · Reliable · Has Mechanical Knowledge · Excellent customer service skills · Great leadership skills in shops · Well Spoken · Excellent at following directions

Job DescriptionMavis Tires & Brakes at Discount Prices - Automotive Assistant & Service ManagersPut your career into high gear with Mavis Tires & Brakes at Discount Prices! We're looking for full-time Automotive Assistant and Service Managers to join Team Mavis at one or our state-of-the-art automotive service and retail tire sales centers in the Hillsborough Township, NJ area. With over 2,000 retail locations, Mavis is one of the largest tire sales and automotive repair chains in the United States. About the Position of Assistant ManagerAs a future leader of Mavis, the Assistant Manager supports the Store Manager to ensure each Mavis retail location operates efficiently, safely and effectively. Using fundamental leadership skills, Assistant Managers are responsible for enforcing established policies, procedures and standards, scheduling mechanics/technicians' work, managing outside orders, ensuring the quality and timely completion of jobs, meeting customer expectations, and the safety of team membersAbout the Position of Service ManagerThe Service Manager is responsible for assisting customers with tire selections and recommending necessary under-car repair services. In addition, to ensure complete customer satisfaction by delivering timely completion of high-quality vehicle repair and maintenance, Service Managers must direct the workflow of Mechanics, Alignment Technicians and Tire Technicians and stage vehicle repair/maintenance work. While driving the sales initiatives of Mavis, Service Managers must communicate directly with customers, assess customer needs, provide information regarding requested and/or necessary automotive repairs and maintenance, ensure customers are satisfied with their in-store experience and strive to meet customer expectations.Employee BenefitsAt Mavis, we understand that our people drive our success. We provide our team members with competitive weekly pay, including weekly incentive compensation, a good working environment and an excellent combination of additional benefits like health, dental and vision insurance, a 401(k) retirement savings plan with employer match, paid vacations, paid time off, paid holidays, life insurance, on-the-job training, and opportunities for career growth and advancement.QualificationsWe recruit team members who share our commitment to providing complete customer satisfaction and delivering the highest quality service. To be eligible for the position of Automotive Assistant / Service Manager, you must (1) be at least 18 years of age; (2) be legally authorized to work in the United States; and (3) possess (i) 1 year of experience and/or training in automotive parts and/or tire sales, (ii) 1 year of experience and/or training in automotive repairs/maintenance, or (iii) any combination of education, training, and experience which demonstrates the ability to perform the duties and responsibilities of the position.What are you waiting for? APPLY NOW!Candidates can apply online at www.mavis.com/careers. OPEN INTERVIEWS ARE AVAILABLE 7 DAYS A WEEK! Simply walk in during store hours for an immediate interview. If you have any additional questions, you may call the Recruitment department toll-free # at 844-375-3995.For more information about Mavis, please visit www.mavis.com.Mavis is an Equal Opportunity Employer Job Posted by ApplicantPro \nCompany Description Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value. We're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today! Mavis is a national leader in tire and automotive services, boasting a family of brands which include Mavis Discount Tire, Mavis Tires & Brakes, Midas, Express Oil Change & Tire Engineers, Brakes Plus, Tire Kingdom, NTB (National Tire & Battery), Town Fair Tire, and Tuffy. From tires, oil changes, brakes, alignments, and batteries, to suspensions, exhaust work, and state inspections, we deliver it all with the same honest, community-first service that we’ve been known for since 1949. With more than 3,500 owned and franchised retail locations across the U.S. and Canada, Mavis serves millions of drivers each year, with a commitment to dependability, safety, convenience, and value.\r\n\r\nWe're always looking for Team Members to share our commitment to being the most dependable partner for all car owners. Come join us today!

Job Description Service Advisor Edison, NJ Description Lexus of Edison is a fast-growing Lexus Dealer in New Jersey, and we are looking for an experienced Service Advisor. Lexus of Edison offers a great environment and great benefits. Please apply now https://www.lexusofedison.com/careers. RESPONSIBILITIES • Oversees service orders and flow of Drive Lane. Ensures that customers receive prompt, courteous, and effective service., • Takes ownership of the customer's experience by carrying out those additional assignments that allow the dealership to leave a positive impression with the customer., • Provides concierge support for all owner inquiries, whether phone or in person, to assure the customer does not get mishandled., • Ensures the daily inventory of technicians' time is consistently sold to service customers, • Distributes work between technicians efficiently, • Answers technical questions about vehicle problems, warranties, services, and repairs, • Maintains Customer Success Index at or above company standards, • Assists in diagnosing vehicle problems; order parts and tools as necessary, • Oversees administration of warranty claims as well as training and supervising of service department, • Reinforces company policies and adheres to company standards, • Encourages compliance with applicable laws and regulations, • Maintains good working relationship with factory(s) and foster positive employee relations, • As the Service consultant, you are responsible for assuring that every customer receives excellent maintenance and repair service., • Delivers an exceptional experience., • Manages the service process., • Greets customers and initiates repair orders., • Prospects and sells dealership services., • Coordinates work in progress., • Prepares for after-service delivery., • Delivers vehicles after service., • Adheres to established comeback and repeat repair processes., • Coordinates special parts orders and administers warranty policies., • Supports pre-delivery and delivery activities. resolves customer concerns and coordinates collision center repairs. BENEFITS • Medical, Dental, and Vision, • 401K Plan, • Paid time off, • Growth opportunities, • Paid Training, • Employee Vehicle Purchase Options, • Individually owned and operated, • Discounts on Products and Services EQUAL OPPORTUNITY We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. Requirements QUALIFICATIONS • Organized and friendly personality, • Demonstrated ability to manage others, • Time management skills, • Fantastic communication skills with customers, • Professional, well-groomed personal appearance, • Consistent record of service and sales success, • Strong record of positive customer satisfaction results, • Team oriented and self-motivated, • Able to work with little supervision, • Clean driving record and valid driver’s license

Job Description BOWTIE OS is a modern dealership operating system built to bring sales, CRM, inventory, appraisals, desking, FI, service, parts, recon, detail, reporting, customer communications, and dealership operations into one platform. The application is already built and is being launched at Bridgewater Chevrolet, our pilot store. We are not looking for someone to build a new application from scratch. We need a technically strong, highly organized person who can learn the platform deeply, work beside dealership leadership, troubleshoot production issues, validate workflows and data, coordinate integrations, test fixes, and keep the launch moving when leadership is occupied. This person will become the technical operating owner for BOWTIE OS inside the dealership. You will work directly with the founder, real dealership users, external vendors, and AI-assisted engineering support to diagnose issues, define requirements, test changes, and make sure the system works correctly in the real world. You will be taught how the dealership runs. Your responsibility is to turn that operational knowledge into clean system configuration, data rules, testing plans, issue reports, and verified day-to-day workflows. This is an on-site/hybrid role based around Bridgewater, Hillsborough Township, and Princeton, New Jersey. Regular in-person work at Bridgewater Chevrolet is required. What you will own Learn and become the day-to-day technical owner of BOWTIE OS across CRM, sales, desking, inventory, appraisals, FI, service, parts, recon/detail, reporting, users, permissions, and integrations. Investigate production issues using browser tools, application logs, Vercel logs, Supabase data, API responses, error messages, user reports, screenshots, and repeatable test cases. Work with AI-assisted development support to diagnose issues, validate proposed fixes, test branches, and confirm that releases solve the problem without breaking other workflows. Operate and troubleshoot the BOWTIE OS technology stack: TypeScript, React, Next.js, Supabase, PostgreSQL, Vercel, GitHub, APIs, webhooks, authentication, user permissions, and third-party integrations. Create clear, detailed bug reports with exact reproduction steps, affected user/store/record, expected result, actual result, screenshots, logs, and business impact. Verify new releases in staging and production through defined acceptance testing before workflows are put in front of dealership teams. Configure and maintain users, roles, permissions, store settings, workflow settings, templates, communication rules, and operational dashboards. Validate that customer, vehicle, inventory, repair order, deal, status, reporting, and integration data is correct and consistent across BOWTIE OS and connected systems. Work directly with dealership leadership to map, test, and improve the full deal lifecycle from CRM and desking through FI, delivery, lender funding, Dealertrack DMS, accounting finalization, commissions, and exception handling. Help establish the correct rules for deal status transitions, required data, audit events, integration fields, funding controls, accounting handoffs, and finalization. Coordinate technical follow-up with Dealertrack, DMS, FI, CRM, integration, telephony, email, payment, and other software vendors as needed. Maintain a visible launch command center that tracks issues, severity, owner, workaround, next action, release status, and verification result. Train and support dealership users on BOWTIE OS workflows after those workflows are tested and approved. Document system behavior, workflows, test cases, operating procedures, configuration decisions, data definitions, release notes, and known workarounds. Help create the repeatable technical and operational launch playbook that will support BOWTIE OS at future dealership rooftops. Responsibilities BOWTIE OS is a modern dealership operating system built to bring sales, CRM, inventory, appraisals, desking, FI, service, parts, recon, detail, reporting, customer communications, and dealership operations into one platform. The application is already built and is being launched at Bridgewater Chevrolet, our pilot store. We are not looking for someone to build a new application from scratch. We need a technically strong, highly organized person who can learn the platform deeply, work beside dealership leadership, troubleshoot production issues, validate workflows and data, coordinate integrations, test fixes, and keep the launch moving when leadership is occupied. This person will become the technical operating owner for BOWTIE OS inside the dealership. You will work directly with the founder, real dealership users, external vendors, and AI-assisted engineering support to diagnose issues, define requirements, test changes, and make sure the system works correctly in the real world. You will be taught how the dealership runs. Your responsibility is to turn that operational knowledge into clean system configuration, data rules, testing plans, issue reports, and verified day-to-day workflows. This is an on-site/hybrid role based around Bridgewater, Hillsborough Township, and Princeton, New Jersey. Regular in-person work at Bridgewater Chevrolet is required. What you will own Learn and become the day-to-day technical owner of BOWTIE OS across CRM, sales, desking, inventory, appraisals, FI, service, parts, recon/detail, reporting, users, permissions, and integrations. Investigate production issues using browser tools, application logs, Vercel logs, Supabase data, API responses, error messages, user reports, screenshots, and repeatable test cases. Work with AI-assisted development support to diagnose issues, validate proposed fixes, test branches, and confirm that releases solve the problem without breaking other workflows. Operate and troubleshoot the BOWTIE OS technology stack: TypeScript, React, Next.js, Supabase, PostgreSQL, Vercel, GitHub, APIs, webhooks, authentication, user permissions, and third-party integrations. Create clear, detailed bug reports with exact reproduction steps, affected user/store/record, expected result, actual result, screenshots, logs, and business impact. Verify new releases in staging and production through defined acceptance testing before workflows are put in front of dealership teams. Configure and maintain users, roles, permissions, store settings, workflow settings, templates, communication rules, and operational dashboards. Validate that customer, vehicle, inventory, repair order, deal, status, reporting, and integration data is correct and consistent across BOWTIE OS and connected systems. Work directly with dealership leadership to map, test, and improve the full deal lifecycle from CRM and desking through FI, delivery, lender funding, Dealertrack DMS, accounting finalization, commissions, and exception handling. Help establish the correct rules for deal status transitions, required data, audit events, integration fields, funding controls, accounting handoffs, and finalization. Coordinate technical follow-up with Dealertrack, DMS, FI, CRM, integration, telephony, email, payment, and other software vendors as needed. Maintain a visible launch command center that tracks issues, severity, owner, workaround, next action, release status, and verification result. Train and support dealership users on BOWTIE OS workflows after those workflows are tested and approved. Document system behavior, workflows, test cases, operating procedures, configuration decisions, data definitions, release notes, and known workarounds. Help create the repeatable technical and operational launch playbook that will support BOWTIE OS at future dealership rooftops. Requirements Strong real-world experience with TypeScript, React, Next.js, JavaScript, Node.js, browser debugging, and modern web applications. Hands-on production experience with Supabase and PostgreSQL, including data inspection, SQL, schema concepts, migrations, authentication, Row Level Security, user roles, permissions, and data troubleshooting. Hands-on experience with Vercel: production and preview deployments, environment variables, logs, error diagnosis, release testing, rollback awareness, and deployment verification. Working GitHub knowledge: branches, pull requests, commits, issues, review workflows, and release documentation. Experience troubleshooting APIs, REST integrations, webhooks, authentication, API keys, sync failures, queues, data mapping, and third-party service issues. Able to read code, inspect logs, understand a data model, follow technical instructions precisely, and make controlled fixes when appropriate. Excellent attention to detail and ability to document issues so another technical person can reproduce and resolve them without guessing. Comfortable working in a live production environment where customer, deal, lender, inventory, and accounting data must be handled carefully. Strong problem-solving habits: identify the actual root cause, test a solution, verify the result, document it, and prevent recurrence. Ability to work on-site regularly near Bridgewater / Hillsborough Township / Princeton, New Jersey. Strongly preferred Automotive dealership experience, especially Dealertrack, CDK, Reynolds Reynolds, DriveCentric, DealerSocket, Elead, VinCue, vAuto, RouteOne, Dealertrack FI, service systems, or dealership inventory tools. Experience with a dealership deal flow from CRM through desking, FI, contracting, delivery, lender funding, DMS accounting, commissions, title, and finalization. Experience with B2B SaaS applications, multi-tenant systems, audit trails, sensitive customer data, and role-based access control. Experience with Supabase Edge Functions, realtime applications, Storage, database functions, scheduled jobs, and migration management. Experience with Twilio, Resend/email systems, Stripe, OAuth, telephony, messaging, payment systems, and vendor API integrations. Familiarity with AI-assisted workflows and the ability to use AI productively for investigation, documentation, testing, and implementation support. Strong project management: issue queues, test checklists, change control, launch readiness, training plans, and stakeholder follow-up. Comfortable training nontechnical dealership users after workflows are approved. First major assignment Your first major assignment will be to work directly with dealership leadership to map, test, validate, and document the complete BOWTIE OS deal lifecycle: Customer and deal setup → desking → credit application → FI → lender decision → contract and signatures → delivery → funding → Dealertrack DMS accounting → finalization → commissions → exceptions, cancellations, chargebacks, and audit history. You will help make sure BOWTIE OS correctly reflects the dealership’s actual operating rules, while Dealertrack and the relevant lender/FI systems remain the verified system of record for their respective official functions. What success looks like You can independently investigate most platform and integration issues, gather the correct evidence, and work with AI-assisted engineering support to move toward a verified resolution. Every material bug has a usable ticket: exact steps, screenshots, record IDs, log evidence, impact, owner, priority, and retest result. Releases are tested before and after deployment, with no guesswork about whether a workflow works. The store has trusted workflows for leads, customers, inventory, appraisals, desking, reporting, and the increasingly complete FI-to-accounting process. Department users know what BOWTIE OS is for, how to use their assigned workflows, and where to report a problem. You help turn Bridgewater Chevrolet into the repeatable launch model for future BOWTIE OS stores. Benefits Mon-Fri Schedule###

Job Description • The Process Engineer II ensures manufacturing processes are efficient, cost-effective, compliant with MICRO’s quality standards, and capable of consistently producing products that meet customer specifications. JOB OUTCOMES The Process Engineer II will: • Lead projects that deliver measurable improvements in process efficiency, product quality, and cost reduction across assigned manufacturing areas., • Act as a Subject Matter Expert (SME) to resolve complex technical challenges, optimize process performance, and support cross-functional teams., • Drive sustainable process improvements through data-driven decision-making, root cause analysis, and the implementation of corrective and preventive actions., • Ensure that manufacturing processes consistently meet internal quality standards and customer specifications while remaining scalable and cost-effective. ESSENTIAL DUTIES AND RESPONSIBILITIES Process Improvement – 60% • Lead or actively contribute to cross-functional project teams focused on improving process efficiency, product quality, and cost performance., • Recommend and implement improvements to equipment, tooling, and work methods to increase throughput and optimize resource utilization., • Collaborate in the design and specification of new equipment and tooling to meet production and quality requirements., • Support the installation, testing, and optimization of new or modified equipment to ensure successful integration into manufacturing operations., • Assist in developing and refining manufacturing processes to improve repeatability, yield, and operational reliability., • Conduct root cause analyses of process issues and partner with Quality Engineers to implement sustainable corrective and preventive actions. Process Analysis & Documentation – 40% • Collect and analyze production and process data to identify trends, deviations, and improvement opportunities., • Create clear, accurate process documentation including diagrams, workflows, and written instructions., • Draft and revise detailed work instructions and standard operating procedures (SOPs) with input from senior engineers., • Contribute to the development of validation documentation for new parts, design changes, and process updates., • Assist in managing nonconforming material by documenting issues, coordinating evaluations, and supporting disposition activities., • Interpret and apply tools such as Process Flow Diagrams (PFDs), Failure Mode and Effects Analyses (FMEAs), and Process Control Plans (PCPs) to ensure process control and risk mitigation. TALENT MANAGEMENT This position has no talent management responsibilities. QUALIFICATIONS EDUCATION AND EXPERIENCE • Bachelor’s degree in Engineering or a related field is required., • At least 4-6 years of engineering experience is required. LICENSE AND CERTIFICATION • None TECHNICAL SKILLS • Blueprint reading, • Geometric Dimensioning and Tolerancing (GD&T), • Statistical Process Control (SPC), • Measurement Systems Analysis (MSA, GR&R), • Design of Experiments (DOE), • Statistical software systems, • ERP, • Minitab Statistical Software, • Metal fabrication, • Medical device manufacturing, • MS Office Suite OTHER SKILLS • Verbal communication, • Written communication, • Organizational skills, • Problem solving While performing the duties of this Job, the employee is regularly required to sit; and talk and hear. The employee is frequently required to stand; walk; use hands to touch, handle, or feel and reach with hands and arms. The employee must lift, push, pull, carry and/or move up to 10 pounds frequently, and between 10 and 25 pounds occasionally. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to vibration. The employee is occasionally exposed to wet and/or humid conditions; risk of electrical shock; and odors, dusts, mists, fumes and/or airborne particles. The noise level in the work environment varies from moderate to loud, based on the department/ work area. Compensation & Benefits The anticipated hiring range for this position is $110,000 to $125,000 annually . Actual compensation within this range will be determined based on relevant skills, experience, education, and other job-related qualifications. Based on a candidate’s qualifications and experience, they may be considered for other available opportunities at a different level. Compensation for any such position would be based on the requirements and compensation range applicable to that position. MICRO offers a comprehensive benefits package to eligible employees, including medical, dental and vision insurance; life and disability insurance; a 401(k) retirement plan; paid time off; paid holidays; and other company-sponsored benefits. Eligibility and benefit offerings are subject to the terms of the applicable plans and company policies.

Job Description The CNC Programmer is responsible to analyze job orders, drawings, and blueprints to perform all the necessary calculations and programming to create products per customer specifications. The CNC Programmer is expected to: • Program, test, run and revise machine programming to meet customer specifications., • Set up machine with correct tooling to build product precisely and efficiently CNC Programming 50% · Writes programs from blueprints and/or solid models for the CNC machines with Swiss turning machine programming · Loads electronic files onto the machine. · Studies and interprets drawings, manuals, specifications or sample parts to determine dimensions and tolerances of finished work pieces, sequence of operations, and set-up requirements to maximize efficiencies. · Creates set-up sheets based on tooling selection criteria. · Monitors and verifies the accuracy of each job’s initial set-up and outcome. · Responsible for the machine performance and product outcome of assigned projects. · Revises programs and documents based on engineering changes. · Maintains library of programs. · Sets up and operates machine on a trial run to verify accuracy of machine settings or programmed control data. · Performs first piece inspection once setup is completed. Gives first piece to Quality Inspector and waits for Quality approval to continue. Quality Control 30% · Monitors machine operations to detect out of tolerance machining · Takes corrective action to bring units into specification. Red tags units that are out of specification (OOS), reports OOS to quality personnel and supervisor. · Coordinates with Quality department to ensure parts comply with specifications. · Communicates with supervisor, engineers, quality and other shop personnel for assignments and to resolve machine or quality issues. · Demonstrates ability to streamline processes to increase productivity and quality; production and prototype jobs are setup consistently, timely and accurately. Process Management 20% · Works for continuous process improvements and machine time reductions reporting program changes to Supervisor and /or Manufacturing Engineer. · Keeps CNC operators abreast of daily machine performance and project updates. · Assists in solving plant operating problems and/or cost reductions projects. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · Associate's degree or equivalent from two-year college or technical school in computer numerically controlled programming, machine tool programing, or a related field is required · 4-7 years of CNC programming experience is required. CNC programming experience in a manufacturing or production environment strongly preferred. · Proficient in writing programs from blueprints and/or solid models for the CNC swiss turning machines · 1-3 years of CAM programming experience is required. LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · CAM programming · GD&T · G-code · AutoCAD Design software · ERP software · CNC equipment, 5-axis, Live tool lathe etc. · Citizen CNC and PartMaker · Blueprint reading · Measuring equipment o calipers o ID / OD micrometers o depth gauges o indicators · MS Office Suite OTHER SKILLS · Mechanical aptitude · Set-up, operation and programming of machines · ISO 13485 · FDA 21CFR820 While performing the duties of this Job, the employee is regularly required to sit; use hands to handle or feel; reach with hands and arms; climb or balance and stoop, kneel, crouch, or crawl. The employee is frequently required to stand; walk; and talk and hear. The employee must frequently lift, push, pull, carry and/or move to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. . The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment is usually loud.

Job DescriptionElectronic TechnicianDepartment: Maintenance Reports to: Maintenance Manager FLSA Status: Non-exempt Job Type: Full-time Location: New Jersey Pay Range: $35 – $42 per hour ScheduleMonday – Friday, 8:00 AM – 5:00 PMAbout Our ClientOur client is a family-owned business and has grown into the largest privately held polyethylene extruder in the U.S. While they’ve expanded their reach, they remain grounded in the values that shaped their foundation: faith, integrity, perseverance, and humility. Our client believes that people are at the center of their success. Every team member plays a vital role in helping build lasting relationships, deliver exceptional products, and create a positive impact on customers and communities. This position contributes to a mission driven by purpose and principle, where employees work with dedication, lead with heart, and stay true to the values that continue to guide the organization. Job Summary The Electronic Technician will modify, repair, and improve existing electronic products, equipment, and controls and will assist in developing new or updated electronic systems, components, or products. Essential Functions • Troubleshoot and facilitate repairs on electronic/electrical equipment and machinery used in manufacturing., • Identify and troubleshoot manufacturing processes, mechanical equipment, machinery, and components., • Interface with the Maintenance Department to identify replacement parts or components as needed., • Apply knowledge of commonly used concepts, practices, and procedures within the field., • Apply principles and techniques of engineering to accomplish assigned goals., • Rely on experience and judgment to plan and accomplish goals while following established instructions and guidelines., • Perform a variety of complex tasks requiring independent judgment., • Report potentially dangerous electrical equipment to the supervisor and take appropriate steps to resolve the issue., • Perform safety checks to ensure design plans are feasible under various conditions., • May lead and direct the work of others., • Develop and maintain a positive employee attitude toward their work and fellow employees., • Provide backup support for the Maintenance Manager as needed., • Perform other duties as assigned by the Maintenance Manager. Qualifications & Experience, • Bachelor's degree in Electrical/Electronic Engineering and/or a minimum of 5 years of experience in the field or a related area., • Experience in a manufacturing environment is strongly preferred. Knowledge & Skills, • Ability to perform high-level mathematical functions., • Ability to read, comprehend, and follow necessary safety procedures, signs, and instructions., • Thorough understanding of electronics principles and design., • Proficiency with Microsoft Office Suite or related software., • Strong attention to detail and organizational skills., • Excellent problem-solving abilities., • Ability to follow highly complex directions and procedures., • Excellent verbal and written communication skills across all levels of the organization., • Bilingual skills are a plus. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the position.Physical Requirements, • Moderate physical activity is required., • Significant amount of walking throughout the workday., • Lifting is required., • Ability to distinguish various wire colors and identify electronic system sections and wiring. Working Conditions, • This position normally works in a manufacturing environment., • Hearing, eye, and foot protection are mandatory when engaged in activities within the plant., • Ability to work in temperatures reaching 110°ree;F. What Our Client Offers, • Medical, Dental, and Vision Insurance, • 401(k) Retirement Plan with Company Match, • Paid Time Off (PTO) and Holidays, • Tuition Reimbursement Program, • Employee Referral Program, • Inclusive and Collaborative Work Culture, • Professional Growth and Development Opportunities Pay Range: $35 – $42 per hour Schedule: Monday – Friday, 8:00 AM – 5:00 PM

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job Description The Product Technician 3 is responsible for operating production machinery in accordance with established procedures and guidelines to produce products based on the specifications outline in the Job Book The Product Technician 3 is expected to: · Produce products that meet MICRO’s quality standards and customer specifications consistently Machine Operation 60% · Operates a variety of production equipment and machinery. · Manufacture, test, inspect, package, and label products according to defined procedures and instructions as appropriate. · Uses computer-controlled equipment to select, position and secure automatic or semi-automatic machines. · Verifies material, lubricants, solvents and packaging material are correct. · Produces products that conform to all of the requirements outlined in the job book · Monitors production process during the production run · Performs maintenance activities where applicable · Stops production when product is not in conformance and follows the nonconformance procedure. Product Inspection and Nonconformance Process 40% · Reads and interprets prints located in the job book. Verifies dimensions of finished product visually and/or by using inspection equipment per customer specifications. · Keeps inspection data based on the requirements of the job book. · Completes all necessary documentation. · Uses SPC to verify conformance of products · Identifies production or quality issues and reports it to the appropriate group. This position has no talent management responsibilities. EDUCATION AND EXPERIENCE · High school diploma or general education degree (GED) is preferred. · 0-2 years of experience in a manufacturing environment or equivalent combination of education and experience is preferred LICENSE AND CERTIFICATION · None TECHNICAL SKILLS · SPC · Blueprint OTHER SKILLS · WIP tracking · Multitasking · Personal Accountability · Problem solving · Spatial dexterity · Manual dexterity · Attention to detail · Organizational skills · Basic computer skills While performing the duties of this Job, the employee is regularly required to stand; walk; sit; use hands to touch, handle, or feel; reach with hands and arms; and talk and hear. The employee is occasionally required to stoop, kneel, crouch, or crawl. The employee must lift, push, pull, carry and/or move up to 10 pounds constantly, between 10 and 25 pounds frequently, and between 25 and 50 pounds occasionally. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing this Job, the employee is regularly required to demonstrate manual and spatial dexterity sufficient to operate machinery for precision work. While performing the duties of this Job, the employee is regularly exposed to moving mechanical parts and vibration. The employee is frequently exposed to risk of electrical shock and odors, dusts, mists, fumes and/or airborne particles. The employee is occasionally exposed to wet and/or humid conditions. The noise level in the work environment varies from moderate to loud, based on the department/work area.

Job DescriptionAt Midas we are dedicated to providing quality services to customer vehicles in the areas of inspection, diagnosis and repair utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for automotive service managers to manage and direct all service department activities of a retail store engaged in selling tires and related automotive parts and mechanical services. This position is a Store Manager developmental role. Midas is committed to training our associates and promoting from within the organization. Responsibilities As a Midas automotive service manager, you will manage and direct all automotive and general service technicians in the operation of the shop, including: • Deliver exceptional customer service while listening and consulting customers, • Following up with customers, services requested, estimated completion times etc., • Oversee complete vehicle inspections and then make comprehensive recommendations—building computerized repair orders and sourcing parts, • Deliver and discuss pricing estimates with customers as well as promoting shop service specials, • Lead, manage, and train team while keeping in tune with our companies’ vision, purpose, core values, and employee creed, • Supervise up to ten employees, • Oversee technicians’ inspections, diagnosing and repairing of domestic, European and Asian cars and light trucks, • Maintain inventory counts, • Overall cleanliness and organization of the facility, • Other duties as assignedQualifications, • A minimum of 2 years of store or service manager experience, • General automotive knowledge, • Excellent customer service disposition, • Good communication skills, • Leadership ability, • Team building skills, • Ability to work a flexible retail schedule including weekends, evenings and holidays, • Valid driver’s license Benefits, • Online Training, • Paid Time Off, • Sick Time, • Health Insurance, • Employee Discounts

Job DescriptionCompany: US1150 Buckhead Meat New JerseyZip Code: 08837 JOB SUMMARY: The production supervisor is responsible for the planning, scheduling and directing the work efforts of the production operations department of the facility in an effort to meet and/or exceed, productivity, safety, quality, delivery, and cost goals, and ensure the department operates according to established company policies and procedures. RESPONSIBILITIES: • Direct, coordinate and monitor the daily activities and performance of production direct and indirect associates to assure delivery of high productivity, quality, customer service and compliance of standard company policies, procedures, and safety., • Direct, coordinate and monitor daily activities and performance of the material handling area for both direct and indirect labor., • Manage employee performance through motivation, delegation, development, mentoring and resolving conflict., • Take corrective action as necessary on a timely basis and following company policy., • Conduct regular department or pre-shift meetings to foster employee engagement, communicate any changes to company policies and procedures, address employee concerns, foster idea-sharing and suggestions for improvement., • Participate in staff selection, performance and compensation evaluations, corrective action and terminations, as necessary., • Evaluate and interpret business demand, prioritize and distribute daily work assignments., • Establish line assignment and staffing depending on the line priority list., • Determine and monitor work station assignments/rotation, associate breaks and required overtime., • Meet production goals, quality and cost objectives., • Monitor and maintain inventory levels in the material handling and production areas by using a warehouse management system (WMS)., • Review and record all production documentation., • Participate in the implementation and roll-out of lean principles using 5S, Kaizen, and Kanban methods and tools., • Provide and maintain a safe work environment by directing safety training, generating and reviewing standard operating procedures (SOP)., • Coordinate efforts with the safety department to aid in training, conducting associate observations, updating preferred work methods, conducting accident investigations to determine root causes and routine safety inspections. QUALIFICATIONS: Education: • High school diploma, general education degree (GED), or equivalent degree; or equivalent combination of education and related experience. Experience: • 3-5 years of manufacturing meat processing experience. Professional Skills: • Excellent communication (verbal and written) skills are necessary to perform at a high degree of proficiency., • Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures or government regulations., • Write reports, business correspondence, and procedure manuals., • Effectively present information and instructions and respond to questions from management and inter-department staff., • Capable of working with peers and associates from other departments proactively and constructively., • Ability to successfully engage and lead individual and team discussions and meetings., • Able to add, subtract, multiply and divide into all units of measure, using whole numbers, common fractions and decimals., • Provide effective training to department staff in areas such as standard operating procedures (SOP), safety, conduct, etc., • Apply all relevant policies in a consistent, timely and objective manner., • Prioritize and manage multiple priorities/deadlines and shift priorities as necessary., • Capable of working with peers and associates from other departments proactively and constructively., • Identifies and resolves problems promptly., • Gathers and analyzes information skillfully., • Develops alternative solutions including immediate corrective actions and preventative measures., • Displays willingness to make decisions., • Analyze situations in a critical manner presenting proactive ways rather than reactive solutions., • Tactfully approaches others., • Proficient use of MS Office (Word, Excel, Outlook)., • Ability to learn and apply guest supply technology software and programs (i.e., Warehouse Management System). Physical Demand: The physical, mental, and environmental conditions in which the work is performed. The demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions of this job. • Regularly required to sit, stand, walk and use hands and fingers to operate a computer keyboard, mouse and other equipment, and telephone to talk and hear., • Frequently required to reach with hands and arms and climb or balance., • Occasionally required to stoop, kneel, crouch or crawl and lift up to 20 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment:The environmental conditions in which the work is performed. The demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions of this job. • Primarily work in a manufacturing and warehouse environment and may be exposed to wet and/or humid conditions, cold or elevated ambient temperature, moving mechanical parts, fumes or airborne particles, toxic or caustic chemicals, and outside weather conditions., • The noise level in the work environment is moderate and the environment fast-paced., • May be required to use a scanner, power hand jack, manual hand jack, stacker and forklift., • Must wear personnel protective equipment (PPE) such as goggles, hairnets, and steel toes boots during work operation., • Travel may be required to visit other office locations or attend company events, staff meetings or training sessions., • May be required to utilize personal vehicles for business travel that may result in long periods of sitting., • Must possess a valid state Driver’s License and provide proof of liability coverage meeting Company standards., • This position may require evening, weekend or other shift work depending on business needs. This job description indicates in general terms, the type and level of work performed as well as the typical responsibilities of employees in this classification. The duties described are not to be interpreted as being all-inclusive to any specific employee. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Nothing in this position description changes the at-will employment relationship existing between the Company and its employees. This job description supersedes prior job descriptions.

Job Description ReCloud IT is a fast-growing IT Asset Disposition (ITAD) startup delivering secure, scalable, end-to-end infrastructure lifecycle solutions to customers. We provide comprehensive IT asset management services for organizations and corporations. including logistics management, equipment refurbishment, data erasure, product re-marketing, downstream recycling, and sustainability reporting for our clients. We are headquartered in Piscataway, NJ and service North American markets. Job Title: Lead ITAD Technician / Quality Control Specialist Department: Operations Reports To: Operations Manager Position Summary We are seeking an experienced Lead ITAD Technician to oversee the testing, repair, quality control, and processing of off-lease and returned IT assets—primarily laptops, desktops, and peripheral devices. This role combines hands-on hardware repair expertise with quality control and depot logistics to ensure all processed inventory meets strict functional, physical, and data security standards (R2V3). Key Responsibilities • Hardware Testing & Repair, • Diagnose, troubleshoot, and repair laptops, desktops, and mobile devices down to the component level (display replacements, battery swaps, keyboard/trackpad fixes, and motherboard component swaps)., • Perform triage and component harvesting from non-functional units., • Execute standard OS loading, BIOS updates, and firmware configuration., • Quality Control (QC), • Inspect incoming and outgoing assets to verify grade (Cosmetic A/B/C/D) and functional condition against standard ITAD metrics., • Ensure data sanitization standards (e.g., NIST 800-88, DoD) are fully met and audit logs are accurate before assets move to inventory., • Conduct final audits on repaired or refurbished units to prevent non-conforming items from reaching clients or resale channels., • Depot & Inventory Support, • Assist with depot receiving, unboxing, palletizing, sorting, and logging incoming assets into the ERP system., • Track part movement, maintain an organized parts inventory, and flag low stock for commonly used replacement hardware., • Prepare bulk shipments for downstream re-marketing, recycling, or return-to-client processing., • Leadership & Process Improvement, • Guide and mentor junior technicians on best practices for repair, ESD safety, and testing procedures., • Help optimize processing workflows to improve throughput and yield rates. Qualifications & Skills • Experience: 3+ years of hands-on experience in laptop repair, refurbished electronics, or ITAD processing operations., • Technical Skills: Deep familiarity with major OEM hardware (Dell, HP, Lenovo, Apple), diagnostic tools, component replacement, and BIOS settings., • Maintain expert-level knowledge of industry standards and regulations, including R2v3, ISO 9001, ISO 14001, ISO 45001, and global e-waste directives (e.g., WEEE)., • Data Security Knowledge: Familiarity with NIST 800-88 standards and commercial data wiping software, • Certifications (Preferred): CompTIA A+, OEM Certifications (Dell, HP, Apple Certified Technician), or R2v3 / RIOS awareness., • Meticulous Attention to Detail: High standard for accuracy and quality control; understands that the small things matter when inspecting hardware, logging serial numbers, and wiping drives., • Physical Capabilities: Ability to lift up to 50 lbs and stand/walk for extended periods within a warehouse/depot environment. Compensation & Benefits Pay range is between $26 - $28/hour with a 40-hour standard workweek. ReCloud IT offers paid time off and medical, dental and vision insurance benefits with partial company subsidy.

Job DescriptionDescription: • Receiving and Put-away all inbound freight according to procedural standards., • Picking and Shipping customers orders as well as 3PL items as procedural standards., • Product Distribution to and from Manufacturing., • FIFO/FEFO Rotation., • Ensures warehouse stocking area is clean and well maintained, in accordance with federal, state, and local safety rules. Organization: • Receives and tags items in the warehouse with barcode labels, pallet tags, allergen stickers etc., • Ensures stocked items are organized, allergen separated and readily accessible. Stock Inspection: • Examines items in inventory for defects, damage and reports this information to Inventory Control Department., • Reports any and all quality defects of ingredients to the Quality control team. Requirements: Skills/Experience • Must have RF scanning system knowledge., • Previously trained operated reach and hi-lows., • Knowledge of FIFO system., • Ability to work off pick lists and system driven reports., • Ability to multi-task., • Strong communication skills; verbally and in writing. Bilingual Spanish a plus., • Ability to build excellent working relationships and work collaboratively and efficiently with others., • Exhibit self-motivation, confidence, energy, & ability to operate under pressure., • Detail oriented with standard mathematical acumen., • Sound understanding and application of safety rules and regulations., • Ability to use warehouse equipment such as reach trucks, hand trucks, pallet jacks and forklifts., • Ability to effectively use Microsoft software, i.e., Word, Excel., • Standard ability to apply general mathematical concepts. Work Environment • Dry, refrigerated and Freezer conditions., • Regularly works near moving machinery and mechanical parts sometimes in high places., • Occasionally exposed to wet and/or humid conditions, ambient air, temperature extremes, fumes or airborne particles and vibration., • Noise level in the work environment is usually moderate, but occasionally high., • Products manufactured in the facility may contain peanuts, milk and tree nuts. Physical Requirements • While performing the duties of this job, the employee is regularly required to stand and walk for the duration of the production shift. In addition, the employee is regularly required to talk and listen., • The employee is frequently required to sit; climb; balance, stoop, and kneel or crouch., • Regularly required to use hands to fingers, handle, or operate objects, tools, or controls; and reach with hands and arms., • The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds., • Specific vision abilities required by this position include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Experience/Qualifications • High School Diploma and one year warehousing operation, or any equivalent combination of education and experience to include two (2) years of experience using a forklift and reach truck and knowledge of experience using order picker and scissor lift., • Two years minimum experience with RF scanning systems. Our Commitment to You At Jimmy's Gourmet Bakery, we believe our team's success starts with feeling valued and supported. That's why we offer: • Competitive pay and performance bonuses, • 401(k) with company match, • Health, dental, and vision insurance, • Company-paid life insurance and EAP support, • Generous PTO and career growth opportunities Join a team that values your contributions and well-being.

Job Description • We are hiring immediately for seasonal WAREHOUSE ATTENDANT positions., • Location: Rutgers University - 1 Scarlet Knight Way, Piscataway, NJ 08854. Note: online applications accepted only., • Schedule: Seasonal schedule; days and hours may vary. More details upon interview., • Requirement: Prior warehouse experience required; experience working in an athletic stadium is a plus., • Fixed Pay Rate: $19.00 per hour. *Internal Employee Referral Bonus Available The advertised program is a conversational recruiting assistant that helps you apply to jobs with Compass Group. Message frequency varies. Message and data rates may apply. Text STOP to opt out or HELP for help. Terms and conditions: http://olivia.paradox.ai/moSkg At Gourmet Dining & Chartwells Higher Education, people are at the core of our business. Together we build innovative food service concepts and serve fresh, local and nutritious meals at over 270 college campuses across the country. Twice named the Fastest Growing Brand by Nation’s Restaurant News, at Gourmet Dining & Chartwells we take pride in creating opportunities for associates to grow their careers and achieve their development goals within the company. Job Summary Summary: Receives, stores and distributes material, tools, equipment and products. Essential Duties and Responsibilities: • Reads production schedule, customer order, work order, shipping order or requisition to determine items to be moved, gathered or distributed., • Conveys materials from receiving or production areas to storage or other designated areas., • Places materials/goods on racks, shelves and bins or in refrigerated rooms according to predetermined sequence such as size, type, style, color or product code., • Fills requisitions, work orders or requests for materials, tools or other stock items and distributes items to production workers or assembly line., • Assembles customer orders from stock and places orders on pallets or shelves; conveys orders to packing station or shipping department., • Marks materials with identifying information., • Opens bales, crates and other containers., • Records amounts of materials or items received or distributed., • Weighs or counts items for distribution within plant to ensure conformance to company standards., • Arranges stock parts in specified sequence for assembly by other workers., • Uses computer to enter records., • Compiles worksheets or tickets from customer specifications., • Drives vehicle to transport stored items or to pick up items., • Completes requisition forms to order supplies from other plant departments., • Prepares parcels for mailing., • Maintains inventory records., • Performs other duties as assigned., • Ensures proper presentation, portion control and maintenance of serving temperatures; follows HACCP standards., • Personal commitment to your own safety and that of others., • Abides by all Company policies and procedures including but not limited to:, • The use of a medium weight cut gloves when handling or using knives, peelers, choppers, mandolins or cleaning a slicer., • The use of oven mitts, fryer gloves or steamer gloves when handling hot pans from ovens, warmers or steamtables., • The use of slip-resistant shoes and proper lifting techniques. The Benefits We are always looking for ways to invest in our people both inside and outside of work to help them achieve their full potential. Full-time and part-time positions offer: Retirement Plan, Associate Shopping Program, Health and Wellness Programs, Discount Marketplace, Identity Theft Protection, Pet Insurance, Voluntary Benefits, including Critical Illness Insurance, Accident Insurance, Hospital Indemnity Insurance, Legal Services, and Choice Auto and Home Program Full-time positions also offer the following benefits to associates: Medical, Dental, Vision, Life Insurance/AD, Disability Insurance, Commuter Benefits, Employee Assistance Program, Flexible Spending Accounts (FSAs) Associates may also be eligible for paid and/or unpaid time off benefits in accordance with applicable federal, state, and local laws. For positions in Washington State, Maryland, or to be performed Remotely, click here or copy/paste the link below for paid time off benefits information. https://www.compass-usa.com/wp-content/uploads/2023/08/2023WageTransparencyGourmetDining.pdf Our Commitment to Diversity and Inclusion Compass Group is an equal opportunity employer. At Compass, we are committed to treating all Applicants and Associates fairly based on their abilities, achievements, and experience without regard to race, national origin, sex, age, disability, veteran status, sexual orientation, gender identity, or any other classification protected by law. Qualified candidates must be able to perform the essential functions of this position satisfactorily with or without a reasonable accommodation. Disclaimer: this job post is not necessarily an exhaustive list of all essential responsibilities, skills, tasks, or requirements associated with this position. While this is intended to be an accurate reflection of the position posted, the Company reserves the right to modify or change the essential functions of the job based on business necessity. Certain positions may require Florida Level 2 background screening. Details: https://info.flclearinghouse.com/ Applications are accepted on an ongoing basis. Gourmet Dining maintains a drug-free workplace. Gourmet

At Chanel, we are focused on creating an inclusive culture that nurtures personal growth, contributing to collective progress. We believe the uniqueness of each individual increases the diversity, complementarity and effectiveness of our teams. We strongly encourage your application, as we value the perspective, experience and potential you could bring to CHANEL. CHANEL is looking for an Associate Product Assessment to join our Fashion After-Sales Team in Piscataway, NJ. This person will be responsible for assisting with the day-to-day After-Sales operations, handling all incoming stock and client repairs. This role will work directly with our Client Relations, Quality Operations, and Workshop Atelier on all functions related to product assessment and repairs. Our ideal candidate will have 1-2 years of retail or corporate experience, and a passion for product and client experience. Product Assessment • Perform daily assessments on incoming stock and client repairs, ensuring assessments are being performed within lead time, • Ensure proper steps are completed to complete product assessments including identifying repair service selection, product identification, authentication, etc., • Prioritize repairs that could be highly sensitive including newly purchased items and client escalations, • Occasionally partner with client relations team on repair inquiries, • Occasionally ship repairs to external vendors, when required, • Partner daily with local and global workshops on repair feasibility, • Identify quality issues and communicate emerging quality issues to managers, to ensure proper handling of repairs, • Partner with client relations team on irreparable repairs, • Review incoming stock repairs and ensure product is within selling standards, • Perform systems steps for stock repairs, including transfer of inventory, resolving claims systematically, etc., • Support manager on any emerging assessment activity Spare Part Processes & Global Repairs • Pick and order spare parts for incoming repairs, communicating with our Global teams on orders, deliveries, mis-deliveries, etc., • Organize and upload stock replenishment of spare parts in necessary systems, • Communicate extended lead times to retail teams on repair delays, • Perform physical audits of repairs with extended lead times, • Perform spare parts receiving process, matching spare parts with repairs and prioritizing repairs in local workshop, • Assist with occasional cycle counts related to spare parts inventory, repairs requiring spare parts, and global repair locations, • Partner with Global repair teams on repair feasibility, ensuring timely responses and handling of claims, • Communicate with global through GRACE system / emails on issues with repairs or extended lead times, • Organize shipment of repairs to global once per week, partner with internal and global customs teams on clearance delays, • Receive global repairs within one-week delivery lead time, communicating repair issues to managers, if necessary, process these repairs back to stores, • Assist manager with spare parts replenishment, and identifying needs (model stock), • Working in a highly collaborative environment, • Passion for product, with high attention to detail, • Multi-tasking within projects in a dynamic, fast paced environment, • Being comfortable with decision-making, • Strong passsion for enhancing the client experience, • Collaborating with passionate teammates, • Excellent communication skills, • Strong attention to detail, • Passion for product and understanding of the CHANEL client experience, • Ability to work collaboratively across department, • Ability to thrive in a team environment, • Minimum 1-2 years of related experience (operations, retail, client experience role), • Excellent verbal and written communication skills, • Comfortable working in systems, • Proficiency in MS Office, • Bachelors degree (preferred), • Work-Place Essential: This role requires 5 days in person office at the Piscataway, New Jersey office., • The anticipated base salary range for this position is $26-$33. Base salary is one component of the total compensation for this position. Other forms of variable pay may be offered for this position. Other components may include bonus potential, benefits, and/or perks., • Wellbeing resources include dedicated paid time off for wellbeing (2-week August Office Closure) and a Wellbeing fund, • Family and care giving benefits (inclusive of parental leave, fertility support, MilkStork, and Care.com Membership), • Generous paid time off policies to include vacation, holiday, sick and volunteer days, • 401K and other incentives, • Robust healthcare offerings; medical, dental, vision, MDLIVE (virtual care), One Medical, Flexible Spending Accounts (Health Care & Dependent Care), Health Savings Account and Employee Assistance Program, • Life insurance, Accidental Death & Dismemberment, Short Term Disability, Long Term Disability, Health Advocate, International Business Travel Accident & Medical, and Commuter Transit & Parking Chanel is a private company whose values are grounded in creating the conditions for people to perform at their best and feel fulfilled and confident in their work. We offer a unique work environment where individuals are encouraged to better understand the brand, the business, and motivations, so that together we can unlock the possibilities of growth. This is reflected in: • At CHANEL, we are intentional in promoting Diversity & Inclusion. We foster respect, empathy and dignity for all. We believe strongly that the diversity of our people across the full spectrum of human differences is essential to our organisation and the connections we have with each other and our clients., • We offer Employee Resource Groups in the US that are voluntary, open to all, employee-led groups formed around a shared identity or lived experience, whose aim is to foster a diverse, inclusive, and equitable community aligned with the values and missions of the communities they support., • CHANEL Community empowers our employees to channel their passions, talents and sense of purpose to contribute to and learn from our communities., • Employees are encouraged to take time off annually to volunteer through CHANEL Community. CHANEL also matches employee donations to select charitable organizations., • CHANEL Mission 1.5 is our climate action plan. It is focused on transforming the business in line with the ambitions of the Paris Agreement on climate change to limit the average global mean temperature increase to 1.5 degrees Celsius above preindustrial levels., • Employees are encouraged to contribute to our US Sustainability efforts at the corporate level and within the divisions, through organized taskforces and initiatives., • We are committed to extending our legacy of cultural engagement. Global support includes the CHANEL Culture Fund, which supports a select group of leading art culture institutions across the globe, and the CHANEL Next Prize for the next generation of creative talent. US support currently includes Annual sponsorship of the MoMA film program, Tribeca Film Festival programs and Through Her Lens, Support of the Academy Gold Fellowship for Women and Sponsorship of the BAAND Together Dance Festival at Lincoln Center., • Since 2011, Fondation CHANEL's mission is for women and girls to be free to shape their own destiny. Through multi-year partnerships with financial and technical support, Fondation CHANEL is committed to improving the safety and autonomy of women and adolescent girls around the world, impacting over a million women and girls in its first 10 years., • For more information, please navigate to the Fondation Chanel website here

Job Description Job Description Date 10/2025 Location 1300 Airport Road, North Brunswick NJ Title Mechanic, Maintenance (PKG.) Department Facilities / Engineering Reports to Manager, Maintenance FLSA (Exempt or Non-Exempt) Non -Exempt Role Overview The Packaging Mechanic is responsible for operating, maintaining, troubleshooting, and repairing packaging lines and auxiliary equipment (e.g. fillers, cappers, labelers, cartoners, sealers, conveyors, etc.). On higher levels, the role involves preventive maintenance, changeovers, and acting as a technical leader on the packaging floor. Areas of Responsibility Level 1 – Mechanic, Maintenance (PKG.) Mechanic supports routine maintenance, equipment cleaning, basic setup, basic troubleshooting, and minor repairs under supervision. Ideal for those newer to packaging maintenance, this role focuses on learning and executing tasks safely and accurately. Operates under close supervision, handling routine maintenance tasks such as cleaning, basic setups, and minor repairs. Escalates complex issues to higher-level technicians. Key Responsibilities: • Assist with setup, changeovers, cleaning, and basic operation of packaging lines., • Load materials (labels, cartons, films) into packaging equipment., • Perform basic visual inspections, detect packaging defects, and remove faulty units., • Assist in daily cleaning, line sanitation, and housekeeping., • Follow standard operating procedures (SOPs), batch records, and safety protocols., • Document basic packaging metrics, logs, and shift records., • Escalate technical issues to higher‑level technicians., • Assist in minor mechanical adjustments (e.g. tightening bolts, replacing belts) under supervision., • Participate in safety and quality training. Level 2 – Mechanic, Maintenance (PKG.) Mechanic requires the ability to independently perform equipment maintenance, moderate troubleshooting, perform machine change overs and setup and perform limited repairs . Employees at this level work with moderate supervision, frequently exercising independent judgment. They apply solid mechanical and electrical skills to set up, repair, troubleshoot, and maintain equipment. They are expected to analyze problems, propose solutions, and take ownership of more complex tasks. Key Responsibilities: • Independently perform maintenance, troubleshooting, and repair on packaging lines including blister, bottle, cartoning, and label printing systems., • Diagnose mechanical, electrical, pneumatic, and control system issues (motors, drives, sensors, solenoids, PLC I/O) on packaging equipment., • Execute changeovers and line reconfigurations, calibrations, and adjustments for product format changes., • Perform preventive maintenance and predictive maintenance tasks, identifying worn parts and scheduling replacements., • Read and interpret mechanical drawings, electrical schematics, and wiring diagrams., • Mentor Level 1 technicians, guiding and reviewing their work., • Assist in packaging reliability improvement initiatives, root cause analyses, and process optimization., • Support emergency breakdowns and unscheduled repairs to minimize downtime., • Participate in regulatory and safety audits related to packaging lines. Level 3 - Mechanic, Maintenance (PKG.) Mechanics are highly skilled professionals who lead complex repairs, system diagnostics, and project-based maintenance work. They serve as subject matter experts and may act as a shift lead. Operates independently with full responsibility over packaging line performance. Handles advanced diagnostics, major repairs, preventive maintenance programs. Makes judgment calls on repair vs replace. Leads projects, supports regulatory compliance, and provides technical leadership. Works with the engineerign team in identfying and proposing process improvements and in maintaining adequate critical spare parts as well as consumables. Key Responsibilities: • Lead maintenance, upgrade, and optimization of complex packaging lines (blister, bottle, cartooning, label printing, IFC lines)., • Perform advanced diagnostics, root cause analysis, and system redesigns to improve reliability and throughput., • Take full responsibility for major line failures and coordinate cross‑functional resources to resolve issues., • Plan and execute capital projects, line changeovers, expansions, and line integrations., • Act as technical liaison with vendors, OEMs, contractors, and internal engineering groups., • Develop and manage preventive and predictive maintenance programs., • Mentor, train, and coach Level 1 and Level 2 technicians., • Participate in regulatory inspections and ensure compliance documentation., • Recommend equipment upgrades, modifications, or replacements., • Lead packaging continuous improvement initiatives (OEE improvements, downtime reduction). Requirements Education & Qualification: Level 1 – Mechanic, Maintenance (PKG.) • High School diploma or GED required., • 0–2 years in maintenance experience in a manufacturing environment, • Basic mechanical aptitude and tool familiarity., • Ability to follow written SOPs and safety protocols., • Willingness to work flexible shifts and overtime., • Forklift experience is a plus. Level 2 – Mechanic, Maintenance (PKG.) • High school graduate or GED equivalent, Technical or vocational training is a plus., • 3+ years of hands-on maintenance experience in manufacturing., • Strong understanding of safety, compliance, and regulatory standards., • Knowledge of cGMP, OSHA, and equipment schematics., • 1+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred. Level 3 – Mechanic, Maintenance (PKG.) • Must have a high school diploma or GED equivalent, • Associate degree, technical certification, or vocational training is a plus, • 5+ Years work experience in a regulated industry such as Nutritional’s, vitamins, food manufacturing or pharmaceutical equipment maintenance is preferred., • Advanced understanding of mechanical, pneumatic, and electrical systems., • PLC troubleshooting experience preferred., • Strong leadership and communication skills., • Ability to work independently with little to no supervision., • Trade certifications in HVAC, electrical, pneumatics, or hydraulics are highly preferred. Certifications, Licenses, Credentials: • License or certifications in electronics, pneumatics and/or hydraulics preferred., • Forklift /scissor lift driver’s certification is a plus but not a requirement. Skills & Ability • HVAC, Electrical, Plumbing, Painting, pneumatic, boilers, compressed air systems, pumps, hydraulic and Mechanical systems as required. PLC is a plus., • General PC proficiency and work order systems etc., • Skill in handling several projects or tasks at the same time, or within a given time frame., • The ability to recognize a safety issue or potential safety issue., • Skill in quality and compliance vigilance., • Ability to maintain a professional, positive attitude at all times., • Ability to communicate with coworkers, management team members, and other individuals in a courteous and professional manner., • Demonstrates ability to work in a team and assist others., • Able to follow written instructions precisely and perform basic math calculations as required., • Understands and is knowledgeable of cGMP, OSHA standards, etc., • Demonstrates the ability to read and write basic English to be able to understand the industry-regulated instruction sheets., • Demonstrates forklift experience with both sit-down and stand-up trucks., • Demonstrates the ability to read and write basic English to be able to understand the industry regulated instruction sheets., • Mechanically inclined to understand inner workings of equipment., • Able to read from schematics and blueprints. Physical Requirements (lifting, etc.): • Ability to lift up to 50 lbs.; occasionally lift and move up to 75 pounds., • Must stand and walk on the production floor for a minimum of 6 hours per shift., • Uses hands to finger, handle, feel, or operate objects or controls, lifting to waist height and/or above shoulder height, frequent bending from the waist, or squatting, walking short distances., • Occasionally works from a rolling ladder or step stool, must be to lean over equipment as well as kneeling on t

Job DescriptionBenefits: • Bonus based on performance, • Health insurance, • Paid time off At Midas, we are dedicated to providing quality service to customer vehicles in the areas of inspection, diagnosis and repair, utilizing the expertise attained through ASE Certifications and/or years of automotive repair experience. We are looking for Automotive Service Managers to assist in managing and directing all service department activities, with the primary focus of selling tires, automotive repair, and maintenance services. The Co-Manager position is developmental leadership role. Midas is committed to training our associates and promoting from within the organization. Responsibilities As a Midas Automotive Service Manager, you will manage and direct all automotive and general service technicians in the operation of the shop, including: · Ensures a safe, secure, and trustworthy work environment. · Develops personal growth opportunities. · Establishes strategic goals by gathering information from reporting documents. · Define objectives, identifies, and evaluates trends and options, chooses a course of action and evaluates outcomes. · Lead by example, manage, and train team while keeping in tune with our companies’ vision, purpose, core values and employee creed. · Ensure that all policies and procedures are being followed by all employees. · Deliver exceptional customer service while listening and consulting customers. · Oversee complete vehicle inspection and then make comprehensive recommendations by building computerized repair orders and sourcing parts. · Ability to discuss pricing estimates with customers as well as promoting shop service specials and financing options. · Monitor the quality of all vehicles being signed out. · Ability to successfully supervise up to 10 employees. · Closely monitor inventory levels while managing product ordering and receipt. · Maintaining a clean and organized job site. · Other duties as assigned. Qualifications • A minimum of 2 years of store or service manager experience, • General automotive knowledge, • Excellent customer service disposition, • Good communication skills, • Leadership ability, • Team building skills, • Ability to work a flexible retail schedule including weekends, evenings and holidays, • Valid driver’s license Qualities that make you stand out from the rest: · Attention to detail and organizational skills · Understanding the current performance of the location and asks for assistance if needed. · Open communication with their team · Excellent customer service skills · Responsible · Focus on sales categories to ensure that all opportunities are taken care of · Excellent phone skills · Understands the importance of quality control · Excellent problem solving skills · Has mechanical knowledge · Excellent leadership skills

Job Description Overview Avanath is proud to be named one of the top property management companies that provide affordable housing for the workforce. Cultivating the American Dream is the purpose that binds the team. At Avanath, every day is an opportunity to make a difference in someone's life. Whether helping residents call one of our communities' homes, providing excellence in customer service, or championing our workforce, we are committed to creating an unforgettable experience as a great place to live, work, and be. The Role: The Maintenance Apprentice is an essential member of the maintenance team, directly reporting to the Community Manager. This role demands a high level of professionalism, effective communication, and positive interactions with both residents and staff. A proactive approach is critical to preserving the property's appearance and ensuring its smooth operation. The successful candidate will be entrusted with various responsibilities, including performing minor repairs, efficiently managing time, and prioritizing tasks to maintain the property to the highest standards for the benefit of residents. The incumbent in this role must possess high professionalism and positive engagement for our residents and the workforce. Qualifications • 2+ years of grounds or porter experience., • Knowledge of and ability to safely operate property maintenance equipment (e.g., pressure washer, leaf blower, snowblower)., • Ability to perform minor maintenance and repairs as needed., • Detail-oriented and thorough., • Strong time management and organizational skills to handle multiple tasks efficiently., • Ability to work independently and as part of a team in a fast-paced environment., • Thorough understanding of safety hazards and proper use of various cleaning and sanitizing solutions., • Good interpersonal skills with polite and courteous demeanor toward staff, prospects, residents, vendors, and all visitors of the property., • Must have basic knowledge of Fair Housing Laws and OSHA requirements., • High School Diploma or equivalent Key Accountabilities + Customer Service and Maintenance • Provides exceptional customer service with every interaction and delivers high-quality maintenance service., • Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property by diagnosing the source or cause of the defect or problem and making repairs in accordance with established policies, procedures, safety standards, and code requirements., • Completes the "make-ready" process to prepare vacant apartment homes for leasing and new move-ins by completing the pre-move-out inspection, creating a "punch" list of maintenance work needed, scheduling vendors and contractors as needed, obtaining needed supplies and materials, completing all maintenance tasks, and inspecting completed work., • Assists in maintaining the grounds, common areas, and amenities by picking up trash and debris, pressure-washing breezeways and pool areas, performing general cleaning, and painting curbs and signage as needed., • Supports cost-cutting and expense control programs by fixing rather than replacing parts when possible, not being wasteful with materials and supplies, and practicing the correct use of tools and equipment. Assists in conducting routine and periodic property inspections to identify safety and risk management concerns, keep the property in good repair, and communicate concerns about the physical needs of the property to management., • Follows procedures for accessing and obtaining materials, supplies, equipment, tools, and other items from the property's maintenance department by tracking inventory used, returning unused items to the established location, and notifying the maintenance supervisor about re-ordering needs. + Adherence to Property Management Rules, Regulations, and Guidelines • Practices proper safety techniques in accordance with Company, property, and departmental policies, procedures, and standards by immediately reporting any mechanical or electrical equipment malfunctions, employee/visitor/resident injuries or accidents, or other safety issues to the appropriate individual(s)., • Complies with Avanath's safety and risk-management policies by attending and participating in the property's routine safety meetings, completing required training on OSHA and other safety-related laws and requirements, and reporting accidents and incidents promptly and accurately., • Follows established policies and procedures by monitoring and ensuring compliance with regulatory requirements, organizational standards, and operational processes related to area(s) of responsibility and reporting violations or infractions to appropriate individual(s)., • Conduct all business in accordance with company policies and procedures, Fair Housing, Americans with Disabilities Act, and all other laws pertaining to the apartment industry. + Physical Demands & Working Conditions • The incumbent in this position is classified as essential staff and is expected to report to work and adhere to all safety and business protocols., • May be required to report to work during inclement weather conditions., • Frequent standing and walking., • Reading, comprehending, writing, performing calculations, and communicating verbally., • May work in an elevated site, may walk on uneven ground., • Occasional squatting, bending neck/waist, twisting neck/waist, pushing, and pulling., • Maybe required to travel to sister communities to provide maintenance support. How Avanath Supports You We know that our teams are at the heart of our success and growth, and we are committed to showing our appreciation. We offer: • Culture Built on Purpose and Core Values - A Commitment to Integrity, A Spirit of Caring, and A Focus on Continuous Improvement., • Comprehensive Benefits – health, dental & vision, 401(k), personal time off, paid holidays and more!, • Growth that is based on achievement and an emphasis on promoting from within our ranks versus just external candidates., • Development – a commitment to creating opportunities to learn and expand your knowledge in the industry, from online training platforms to training classes to one-on-one coaching. Diversity & Inclusion Avanath Capital is committed to fostering, cultivating, and preserving a culture of diversity, equity, and inclusion. Our human capital is the most valuable asset we have, and Diversity, equity, and inclusion ("DEI") are at the very core of Avanath's operating and investment philosophy. We believe that bringing together people with diverse thoughts, backgrounds, talents, and experiences at all levels of our organization, including the executive team, enables us to proactively and creatively achieve our mission to enable opportunities for hard-working American families. The collective sum of the individual differences, life experiences, knowledge, inventiveness, innovation, self-expression, unique capabilities, and talent that our employees invest in their work represents a significant part of our culture, our reputation, and our achievements. We embrace and encourage our employees' differences in age, color, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics that make our employees unique. Our organization's diversity initiatives include—but are not limited to—our practices and policies on recruitment and selection, compensation and benefits, professional development and training, promotions, transfers, and the ongoing development of a work environment built on the premise of gender and diversity equity that encourages and enforces: + Respectful communication and cooperation between all employees. + Teamwork and employee participation, permitting the representation of all groups and employee perspectives. + Work/life balance through flexible work schedules to accommodate employees' varying needs. + Employer and employee contributions to the communities we serve to promote a greater understanding and respect for diversity. #EST Compensation Range Compensation Range $18.40—$18.40 USD

Job Description DEPARTMENT: Tool Room REPORTS TO: Molding Department POSITION DESCRIPTION: The Tool Room Technician produces effective mold and die repairs through the following: fitting components into molds; finishing new products, components, or inserts; assembling pieces when complete; as well as documenting mold repair procedures in IQMS. RESPONSIBILITIES: • Support the Tool Room Supervisor in the process of setup, testing, procedures, training, and updating of IQMS relative to tooling and operations., • Perform accurate, safe and correct setups prior to commencement of operation., • At point of startup, assure no flash, water leaks and other potential issues. Address any known previous problems or issues. Properly test for water leaks and test electrical for any issues., • Comply with the established standardization of mold setup and teardown procedures. Apply learned best practices., • Select, align and secure fixtures, cutting tools, attachments accessories and materials on machines, • Starts and observes machine operation to detect malfunctions or out-of-tolerance machining and adjusts machine controls as required., • Verifies conformance of finished work piece to specs., • Fits and assembles parts into complete assembly., • Verifies dimensions and alignment of assembly., • Perform work within the Tooling Preventive Maintenance program including but not limited to in-mold closings, hoses and water fittings. Utilize IQMS/Kanban to maintain processing related to equipment., • Change non-production molds in advance as needed., • Follow proper procedures including lock-out / tag-out, mold maintenance sheets and others., • Maintain consistent and effective component cleaning and storage., • Maintain liner dies needed for production., • Support OEE/SEE metrics and related goals of cycle attainment, zero-block cavitation, mold set-up compliance, and changeovers to maximize mold efficiency., • Follow the escalation process for tool issues by consistently and openly sharing information with the Tool Room Manager., • Document, standardize and create procedures for repeatability, predictability and improved efficiency specific to related activities., • Perform data entry on shop floor as needed., • Collaborate with Engineering to enable effective vendor sourcing., • Participate in internal machining projects., • Actively participate in tool teardown meetings., • Participate in shift hand-off activity to ensure a smooth shift transition., • Other duties as assigned. RESPONSIBILITIES: • Safety Responsibilities:, • Supports a culture where employees address unsafe conditions and behaviors, make suggestions for improvements, and actively participates in implementing solutions, • Identifies safety gaps and self-initiates corrective actions, • Strictly adheres to plant safety, housekeeping, and 5S efforts, • Understands, identifies, and corrects safety hazards, • Drives a culture which empowers employees to understand and embrace what they own, • Food Safety Responsibilities:, • Monitors and verifies activities to ensure that finished goods and raw materials are coming in and out of the facility meet consumer safety and quality standards., • Complies with all company food safety and quality assurance procedures, • Reports any product or process failures that could impact food safety of manufactured products to the location’s Food Safety Team Leader and submits an appropriate incident report PHYSICAL REQUIRMENTS: While performing the duties, the employee will be required to sit and/or stand, talk or hear, both in person and by telephone; use hands, fingers and arms to feel objects or controls, reach with hands and arms. Prolonged standing/walking periods of 12 hours. May be required to stoop, kneel, bend, crouch and lift to 50 pounds. RESPONSIBILITIES: • Safety Responsibilities:, • Supports a culture where employees address unsafe conditions and behaviors, make suggestions for improvements, and actively participates in implementing solutions, • Identifies safety gaps and self-initiates corrective actions, • Strictly adheres to plant safety, housekeeping, and 5S efforts, • Understands, identifies, and corrects safety hazards, • Drives a culture which empowers employees to understand and embrace what they own, • Food Safety Responsibilities:, • Monitors and verifies activities to ensure that finished goods and raw materials are coming in and out of the facility meet consumer safety and quality standards., • Complies with all company food safety and quality assurance procedures, • Reports any product or process failures that could impact food safety of manufactured products to the location’s Food Safety Team Leader and submits an appropriate incident report About MRP: MRP Solutions (MRP), a plastic cap manufacturer, is a leading provider of high-quality, injection molded plastic closures, jars and packaging components used every day by millions of consumers around the globe. But we offer more than just plastic caps and lids – we deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. MRP Solutions combines extensive packaging expertise with a consultative approach to reliably uncover customer needs. By understanding your business goals, we can tailor smarter, safer, and more flexible packaging solutions that reduce cost and increase speed to market, helping your businesses capitalize on opportunity. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. We are passionate about partnering with distributors and manufacturers who understand that plastic caps and lids are a small but important part of how people experience their brands. Together, we deliver packaging with purpose. Our Vision: We deliver industry-leading packaging solutions tailored to each customer’s unique requirements, providing best-in-class product protection while ensuring consumer confidence. By constantly innovating, MRP enables our customers to grow, making us a preferred partner. Our Values & Beliefs • Integrity – We have the courage to act with the highest level of integrity, even when no one is watching. We do what is right 100% of the time., • Value Creation – The sole reason a company exists is to create real long-term value for society. This starts with ensuring human safety, as value cannot be created without first protecting human life. We seek opportunities for mutual benefit with all of our stakeholders, including customers, employees, shareholders, suppliers, and the communities in which we operate. In everything we do, our overarching goal is to deliver superior results.., • Accountability - We are accountable to each other and to our stakeholders. We say what we do and do what we say. We embrace a culture of ownership, empowering and equipping employees with the ability to own their outcomes., • Entrepreneurial - Everyone thinks and acts like owners, employing good economic and critical thinking skills while adopting the risk profile of our shareholders. We are inquisitive, constantly seeking out opportunities to improve, actively searching for and innovating across each and every aspect of our business. We relentlessly strive to understand and profitably anticipate what our customers need and value, because if our customers do not grow, we do not grow., • Respectful and Friendly – Everyone deserves to be treated with respect and dignity. Because everyone's perspective has value, we embrace diversity of thought, background and experiences. We are friendly and lead with a smile. What we do is important, but how we do it is what makes it impactful., • Change - We actively seek out and embrace change wherever profitable. Because society is constantly identifying and employing new and better ways of accomplishing tasks, we must constantly innovate, reinvent and, ultimately, destroy the old ways of doing business. We actively engage in rigorous debate and embrace challenge to ensure we stay relevant and deliver superior results., • Fulfillment – Our employees are the foundation of our success. We foster an environment enabling our employees to learn, grow and accept more accountability as they demonstrate capability. We promote more than just individual connection as community at work brings people together through common interest, objectives or experiences. MRP Solutions is an equal opportunity and affirmative action employer. We do not discriminate in recruiting, hiring or promotion based on race, color, religion, sex (including sexual orientation, gender identity or expression, transgender status), national origin, age, disability, medical condition, marital or protected veteran status or any other basis or characteristic prohibited by applicable federal, state, or local law. Consistent with the obligations of state and federal law, MRP Solutions will make reasonable accommodation for qualified individuals with disabilities. Any employee who needs reasonable accommodation should contact Human Resources. #INDS

Job Description DESCRIPTION OF POSITION: Responsible for estimating labor, materials and subcontractors required for service repair proposals and ordering of parts for service calls. Assist dispatchers on incoming service calls. Provide technical support to service department and technicians. Must have excellent verbal and written communication skills and must be able to work independently as well as part of the team. RESPONSIBILITIES: • Review all service tickets given by Service Manager to have parts/labor quoted to customer for approval, • Order parts generated by service calls, • Research all parts, cost, subs and availability before quoting jobs, • Prepare estimates and generate proposals for Service Manager approval, • Maintain communication with customers and vendors, • Follow-up with change order requests and estimates, • Assist service technicians to locate parts for service calls as required, • Issue POs to subcontractors and vendors as required, • Enter POs and track delivery, • Assist Accounts Receivable with following up on invoices, • All other duties assigned by management EDUCATION AND/OR EXPERIENCE • Minimum high school education – Technical school education preferred, • Three (3) to five (5) years of HVAC industry experience in Service REQUIRED SKILLS AND STRENGTHS • Knowledge of HVAC industry, • Knowledge of estimating, • Able to plan, • Competent in conflict management, • Ability to meet deadlines, • Computer literate with Word, Excel, email and data entry, • Able to adapt and learn new computer programs, • Familiar with standard office machines, • Work in a fast-paced environment, • Focus amid distractions, • Excellent communication skills, • Customer service oriented, • Outgoing personality, • Good listener, • Team player, • Analytical and detail oriented, • Flexible, • Organized, • Follow directions, • Work independently after initial training BACK UP RESPONSIBILITIES Support to Dispatchers and/or Service Job Coordinator Job Type: Full-time

Job Description HiFyve is hiring a Machinery Technician in the Heavy Equipment Industry across multiple locations! Salary: $35.00 – $43.00/hr Location: Onsite Schedule: Full-time, 7am - 3:30pm M-F Job Duties and Responsibilities: • Perform high-quality repairs and preventative maintenance on Caterpillar and non-Caterpillar construction equipment, • Diagnose and troubleshoot mechanical, electrical, and hydraulic systems with limited supervision, • Disassemble and reassemble components, engines, transmissions, and hydraulic systems according to specs, • Document inspections, diagnostics, and completed repairs in compliance with Foley procedures, • Assist with parts research and ordering; communicate directly with parts department, • Maintain clean, organized workspaces in compliance with contamination control and HAZMAT safety standards, • Adapt to new technologies, diagnostic tools, and repair techniques as needed, • Ensure tools and equipment are properly secured at the end of shift Education Requirements: • High school diploma or GED required, • Technical certifications or relevant vocational training preferred Knowledge, Skills, and Abilities: • Experience with Cat and non-Cat construction equipment preferred, • Strong mechanical, electrical, and hydraulic troubleshooting ability, • Computer literacy required; familiarity with SIS Web and ET is a plus, • Excellent communication and interpersonal skills, • Ability to multitask and support a high-performing service team, • Committed to safety, accuracy, and continuous learning If you are interested, please apply!