Trabajos quality engineering lead en Plainview, New YorkCrear alertas

Job Description **THIS POSITION REQUIRES ENLISTMENT WITH THE DEPARTMENT OF DEFENSE- UNITED STATES NAVY** JOB DESCRIPTION: Over 150 Job positions available to include INFORMATION SYSTEMS TECHNICIAN/CRYPTOLOGIC TECHNICIAN/CYBERWARFARE TECHNICIAN. Apply to see what you qualify for. No experience required; applicants will receive On the Job training. ALL positions come with incentives listed below. ENLISTMENT SIGN ON BONUS Up to $75k depending on Job Selection REQUIREMENTS: • MUST BE BETWEEN AGES 17-41, • US CITIZEN OR PERMANENT LEGAL RESIDENT [GREEN CARD HOLDER], • MUST HAVE HIGH SCHOOL DIPLOMA OR G.E.D. EQUIVALENT [APPLICABLE COLLEGE CREDITS/DEGREES CAN LEAD TO HIGHER BASE PAY AND POSSIBLE OFFICER ROUTE], • NO DISQUALIFYING MEDICAL ISSUES [MEDICAL HISTORY CHECK], • NO DISQUALIFYING POLICE INVOLVEMENT [CRIMINAL BACKGROUND CHECK], • MUST MEET PHYSICAL STANDARDS SET BY DOD-US NAVY BENEFITS AND ADVANTAGES OF ENLISTING: • -TRAINING AND EXPERIENCE- ACCESS TO ADVANCED TECHNICAL TRAINING IN FIELDS THAT TRANSLATE INTO COLLEGE CREDITS, LEADERSHIP DEVELOPMENT WITH SUBJECT MATTER EXPERTS, AND SPECIALIZED SKILLS PATHWAYS., • -OPPORTUNITIES FOR FURTHERING EDUCATION-, • US NAVAL COMMUNITY COLLEGE [USNCC]: EARN AN ASSOCIATES DEGREE WITH STACKABLE NATIONALLY RECOGNIZED CREDENTIALS IN AS LITTLE AS 1 YEAR, WHILE ALSO FOLLOWING OUR DEGREE PATHWAYS INTO A FUTURE BACHELOR'S DEGREE., • TUITION ASSISTANCE [TA] AND CREDIT PROGRAMS [CLEP/DANTES]: $250 PER CREDIT HOURS, UP TO $4,500 PER YEAR AND PROGRAMS THAT ALLOW FOR FREE TESTING OUT OF PRE-REQUISITE COURSES. APPLICABLE TOWARDS BACHELOR'S/MASTER'S DEGREE AS WELL AS UP TO A DOCTORATE LEVEL., • POST 9/11 GI BILL: COVERS FULL TUITION FOR COLLEGE AND VOCATIONAL TRAINING WHILE ALSO PAYING FOR COST OF LIVING [*REFER TO 2025 NAVY BAH CHART],, • NAVY CREDENTIALING OPPORTUNITIES ON-LINE [NAVYCOOL]: FREE NATIONALLY ACCREDITED CERTIFICATIONS/ LICENSES AND RENEWALS TO FURTHER VERIFY YOUR EXPERIENCE AND EXPAND YOUR RESUME., • UNITED SERVICES MILITARY APPRENTICESHIP PROGRAM [USMAP]: FREE APPRENTICESHIP PROGRAM THROUGH THE US DEPARTMENT OF LABOR DOCUMENTING SKILLS AND HOURS WORKED- LEADING TO A JOURNEYMAN CARD., • -CAREER ADVANCEMENT- CLEAR PATHWAYS FOR PROMOTION AND CAREER DEVELOPMENT BASED ON PERFORMANCE, TRAINING, AND TIME IN SERVICE. EXPERIENCE THAT IS HIGHLY REGARDED IN CIVIL SERVICE CAREERS, SECURITY CLEARANCES THAT ARE HIGHLY SOUGHT AFTER IN ENGINEERING, INFORMATION TECHNOLOGY AND SECURITY FORCE ROLES, ACCESS TO EXCLUSIVE NETWORKS AND JOB POOLS FOR COMPANIES THAT WORK ALONGSIDE THE FEDERAL GOVERNMENT., • -COMPETITIVE PAY AND BENEFITS- SALARY BACKED BY FEDERAL RESERVE [PAYCHECKS 1ST AND 15TH * REFER TO 2025 NAVY PAY CHART FOR ENLISTED PERSONNEL] WITH OPPORTUNITIES FOR BONUSES, SPECIAL PAY, AND ALLOWANCES [EG. HOUSING, FOOD, CLOTHING]. COMPREHENSIVE HEALTHCARE BENEFITS [MEDICAL, DENTAL, VISION THROUGH TRICARE] FOR SERVICEMEMBERS AND FAMILY., • -RETIREMENT AND QUALITY OF LIFE- 30 DAYS PTO PER YEAR, UNLIMITED SICK DAYS, 5% MATCHING TSP [401K], NO DOWN PAYMENT VA HOME LOAN, CHILDCARE ASSISTANCE, SPOUSAL SUPPORT FOR EMPLOYMENT, $500,000 LIFE INSURANCE POLICY FOR UNDER $35 A MONTH, EXCLUSIVE DISCOUNTS AT A VARIETY OF COMPANIES/STORES, TAX FREE SHOPPING AT NEX/COMISSARY FOR ALL NEEDS, FREE PHYSICAL TRAINING FACILITIES AND RECREATIONAL EVENTS/ TRIPS., • -TRAVEL AND ADVENTURE- OPPORTUNITIES TO EXPERINCE NEW CULTURES; WORLDWIDE TRAVEL AND INTERNATIONAL RECOGNITION.

Job DescriptionMachine Shop Supervisor Role with Global Industry Leader / $120,000-$150,000 + Bonus Based on Experience / Room for Growth and Great Benefits This Jobot Job is hosted by: Ken McClure Are you a fit? Easy Apply now by clicking the "Apply Now" buttonand sending us your resume. Salary: $120,000 - $150,000 per year A bit about us: For more than 30 years, our company has specialized in manufacturing and assembling custom components. We are committed to precision, reliability, and quality within an ISO-certified environment. Why join us? $120,000-$150,000 per year depending on Experience Bonus Package Great Benefits PTO Room for Growth Job Details We are seeking an experienced Production Supervisor to lead and oversee a team of 30+ employees in a high-precision, ISO-certified manufacturing environment. This role requires strong leadership, technical expertise, and the ability to drive operational excellence while maintaining the highest standards of quality and safety. Key Responsibilities: Supervise daily manufacturing operations, ensuring production goals are achieved on time and within quality standards. Lead, coach, and develop team members to foster a culture of accountability, continuous improvement, and collaboration. Monitor production schedules, workflows, and resources to optimize efficiency and minimize downtime. Ensure compliance with ISO and other regulatory requirements. Utilize ERP systems to manage production planning, materials, and reporting. Collaborate cross-functionally with Engineering, Quality, and Supply Chain to resolve issues and support process improvements. Drive Lean Manufacturing initiatives to improve productivity, reduce waste, and streamline processes. Qualifications: Bachelor’s degree in Engineering Proven background in precision manufacturing and ISO compliance. Hands-on experience with ERP systems (SAP, Oracle, or similar). Strong leadership, problem-solving, and communication skills. Ability to thrive in a fast-paced, team-oriented environment. Interested in hearing more? Easy Apply now by clicking the "Apply Now" button. Jobot is an Equal Opportunity Employer. We provide an inclusive work environment that celebrates diversity and all qualified candidates receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, age (40 and over), disability, military status, genetic information or any other basis protected by applicable federal, state, or local laws. Jobot also prohibits harassment of applicants or employees based on any of these protected categories. It is Jobot’s policy to comply with all applicable federal, state and local laws respecting consideration of unemployment status in making hiring decisions. Sometimes Jobot is required to perform background checks with your authorization. Jobot will consider qualified candidates with criminal histories in a manner consistent with any applicable federal, state, or local law regarding criminal backgrounds, including but not limited to the Los Angeles Fair Chance Initiative for Hiring and the San Francisco Fair Chance Ordinance. Information collected and processed as part of your Jobot candidate profile, and any job applications, resumes, or other information you choose to submit is subject to Jobot's Privacy Policy, as well as the Jobot California Worker Privacy Notice and Jobot Notice Regarding Automated Employment Decision Tools which are available at jobot.com/legal. By applying for this job, you agree to receive calls, AI-generated calls, text messages, or emails from Jobot, and/or its agents and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here: jobot.com/privacy-policyCompany DescriptionJobot is on a mission to connect good people with good jobs. By combining AI-powered technology with the expertise of Jobot Pros, our experienced recruiters, we help you find career opportunities that align with your goals and values. Founded in 2018 and employee-owned since 2024, Jobot is committed to fostering a culture of kindness, respect, innovation, and connection. As an industry leader, we’ve been recognized as a top workplace by Forbes, Fortune, USA Today, and Staffing Industry Analysts (SIA). Ready to find a good job? Create your profile today at Jobot.com.

The Service and Parts Technical Advisor acts as a direct liaison between Stellantis and a concentration of Chrysler, Jeep, Dodge, Ram, Alfa Romeo, and FIAT dealerships within one of our regional business centers. The Technical Advisor's responsibility is to provide technical assistance and fixed operations consultation to our Dealer Service Personnel, Fleet and Commercial Customers. The Technical Advisor will motivate and lead Dealer Service personnel to a higher level of service and parts performance consistent with corporate and industry direction. They will assist with resolutions on current unresolved issues in support of dealer's efforts to maximize their competitiveness in the marketplace while improving customer retention and loyalty.\n \nKey job responsibilities include but are not limited to:\n \n\n • Provide phone and in-dealership technical assistance\n, • Troubleshoot and solve final repair attempt situations\n, • Represent Stellantis as subject matter expert (litigation/buybacks)\n, • CAIR updates needed for each involvement\n, • Manage dealership technical training requirements\n, • Provide support for C.A.G. / Engineering / proving grounds requests\n, • Recall and Rapid Response (RRT) follow up and reduction\n, • Act as quality feedback liaison\n\n \nProvide dealership consultation on the following:\n \n\n, • Repair Service Agreements and facilities inspections\n, • Tools/equipment/facility\n, • Customer experience and improved Fixed First Visit\n, • Repair shop process improvements and proactive business planning with a focus on the customer\nBasic Qualifications:\n\n, • Associates Degree in Automotive Technology OR a high school diploma / GED AND automotive trade school certification\n, • Excellent verbal communication skills\n, • 3 + years of experience advising dealerships or in automotive technical service (automotive car repair, certified automotive technician)\n, • Excel in building positive working relationships, customer satisfaction and issue resolution\n, • Self-motivated with demonstrated ability to achieve goals under minimal supervision\n, • Willing to relocate\n, • Bachelor's degree in Business, Automotive Technology, or related field\n, • Dealership experience\n, • ASE certification\n, • Health & Wellbeing: Comprehensive coverage encompassing the Physical, Mental, Emotional, and overall Wellbeing of our employees, including short- and long-term disability.\n, • Compensation, Savings, and Retirement: Annual incentives, 401(k) with match, and student loan refinancing.\n, • Time Away from Work: Paid time includes company holidays, vacation, and Float/Wellbeing Days.\n, • Family Benefits: 12 Weeks paid Parental Leave, Domestic Partner Benefits, Family Building Benefit, Marketplace, Life/Disability and other Insurances.\n, • Professional Growth: Annual training, tuition reimbursement and discounts, Business Resource & Intra-professional Groups.\n

Company Overview: Welkin Enterprises, LLC, is a Plumbing and Mechanical construction firm specializing in heavy plumbing, fire protection, HVAC, and in-facilities water and wastewater projects. Welkin’s principals have served clients ranging from government agencies to utilities, contractors, and private firms, including the New York City Transit Authority, The Port Authority of NY & NJ, United States Post Office, Long Island Railroad, MTA Bridges and Tunnels as well the NYC Department of Environmental Protection. Welkin Enterprises is poised to grow due to the current emphasis on rebuilding America’s infrastructure as part of renewing our nation’s economy. For the right candidate with the right attitude, we can provide a dynamic job environment with a company that has experienced growth and expects to continue this trend. We offer medical, dental and vision benefits, life insurance, 401(k), and performance bonus incentives. Welkin Enterprises is an equal opportunity employer. Position Overview: Welkin Enterprises is seeking a dynamic, hands-on Project Engineer. Our projects are typically municipal, infrastructure and mechanical construction involving water, wastewater, fire protection and process piping. The Project Engineer will work under the supervision of senior engineers and managers throughout the entire project. The Project Engineer must be extremely detail oriented, with a focus on cost efficiency. Each phase of an operation is evaluated, planned, possibly re-engineered and built with time and budget in mind. The Project Engineer must be energetic, hands-on, willing to learn, adapt, communicate and take pride in his/her work. Primary Job Functions: The Project Engineer will support project management and field operations to ensure projects are successfully completed. Key responsibilities include but are not limited to: • Review project drawings, specifications, and submittals for accuracy., • Prepare and maintain RFIs, logs, and project documentation., • Track material orders, deliveries, and equipment lead times., • Assist with field coordination, providing layout drawings and technical details., • Support the project team with safety compliance and quality checks., • Maintain project records for reporting and client communication., • Provide day-to-day support to field staff and the project manager. Qualifications, Requirements and Education: Required: • Bachelor’s degree in Mechanical Engineering, Civil Engineering, Construction Management, or a related field;, • 1-3 years of relevant experience working in NYC Construction;, • Must exhibit proficiency in basic engineering computations and analysis;, • Must possess the ability to read, understand and interpret engineering drawings;, • Candidate must have excellent communication skills, both verbal and written;, • Knowledge of OSHA safety precautions;, • Candidate must be a citizen of the United States or otherwise authorized to work in the United States on an unrestricted basis. Computer Skills: • Working knowledge of Excel, Word and PowerPoint;, • Working knowledge of AutoCAD or other drafting software.

Job Description Job Description Schivo Medical in Plainview, New York manufactures a diverse range of essential medical technology solutions. Working with us, you will be apart of the manufacturing process of a vast array of different products including robotic surgery instruments medical devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will work with a team of professionals that are committed to helping create parts that save lives and help assist you with a fulfilling and rewarding career. Manufacturing Engineer job summary: A Manufacturing Engineer is responsible for designing, implementing, and reviewing the procedures and equipment involved in the manufacturing process. Their duties include researching automation techniques, testing new systems for efficiency and planning factory layouts to optimize production. Lead or assist in the cost estimating process. Manufacturing Engineer Necessary Education, Skills, and Competencies (including licensing and certifications): • 3 years of work experience as a manufacturing engineer or similar role needed, • Knowledge of manufacturing processes, fabrication methods and tool design, • Familiarity with manufacturing equipment and quality assurance techniques, • Commitment to health and safety standards and environmental regulations, • Well-versed in relevant software (e.g. CAD, MS Office), • Project management skills, • Problem-solving ability, • Teamwork skills, • Degree in Mechanical Engineering or related field(CNC Machining), • Green belt certificate a plus, • Working knowledge with continuous improvement process Manufacturing Engineer Essential Duties and Responsibilities: • Evaluate manufacturing processes based on quality criteria, such as efficiency and speed., • Provide cost estimations for new and existing projects., • Create, test, and implement manufacturing process., • Study production and machine requirements, • Develop and test effective automated and manual systems., • Design and install equipment., • Implement manufacturing processes that result in high-quality products., • Organize and manage manufacturing workflows and resources., • Optimize facility layouts, production lines, machine operations and network performance., • Resolve issues and delays in production., • Find ways to reduce costs and maximize quality., • Train staff in new and existing processes, • Collaborate with other engineers, contractors, and suppliers., • Ensure that manufacturing procedures follow safety and environmental regulations., • Upgrade systems and processes with new technology Benefits: • Employee referral, • 401(k), • 401(k) matching, • Dental insurance, • Vision insurance, • Life Insurance, • Employee assistance program, • Health insurance, • Paid time off, • Referral program * Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Job DescriptionWe are seeking a Quality Manager to join a leading aerospace & defense electronics manufacturer in the Long Island area. This role is a key member of the site leadership team, responsible for driving quality initiatives, ensuring product reliability, and maintaining compliance with AS9100 standards. The Quality Manager will serve as the single point of accountability for Quality across the division, with direct ownership of supplier quality, customer satisfaction, and continuous improvement initiatives.Key Responsibilities * Manage and maintain AS9100 QMS certification. * Ensure total product integrity through leadership, a shared quality vision, and continuous process improvements. * Develop, implement, and monitor key quality metrics, systems, and procedures to ensure optimal performance. * Define quality objectives, assign functional responsibilities, and track KPI performance. * Drive strategies to reduce the cost of poor quality and improve product performance. * Lead structured continuous improvement and root cause correction initiatives. * Oversee customer and supplier quality audit programs and manage customer scorecards. * Collaborate cross-functionally with sales, engineering, supply chain, and product management to resolve quality issues. * Partner with Supply Chain on supplier metrics and supplier quality management. * Manage the quality organization’s budget and resources to meet financial commitments. * Represent the company in customer interactions, supplier audits, and executive reviews. Qualifications * Bachelor’s degree in engineering (Master’s degree preferred). * Minimum 9+ years of quality leadership experience in electronics manufacturing, preferably within Aerospace & Defense. * Strong working knowledge of ISO9000 and AS9100 quality systems. * Demonstrated success leading continuous improvement, supplier quality, and customer satisfaction initiatives. * Six Sigma / Lean background strongly preferred. * Professional communication skills with executive presence. * Ability to obtain and maintain a DoD Secret clearance. Why Join * Opportunity to lead the entire Quality function within a high-growth defense electronics manufacturer. * Direct impact on strategic quality initiatives that shape reliability, supplier performance, and customer satisfaction. * Collaborative environment with strong executive support for continuous improvement. * Competitive compensation and a full benefits package. About IMS Recruiting IMS Recruiting partners with leading Aerospace & Defense organizations to connect top technical and leadership talent with career-defining opportunities.

Job Description **THIS POSITION REQUIRES ENLISTMENT WITH THE DEPARTMENT OF DEFENSE- UNITED STATES NAVY** JOB DESCRIPTION: Over 150 Job positions available to include ELECTRONICS TECHNICIAN/FIRE CONTROLMAN. Apply to see what you qualify for. No experience required; applicants will receive On the Job training. ALL positions come with incentives listed below. ENLISTMENT SIGN ON BONUS Up to $75k depending on Job Selection REQUIREMENTS: • MUST BE BETWEEN AGES 17-41, • US CITIZEN OR PERMANENT LEGAL RESIDENT [GREEN CARD HOLDER], • MUST HAVE HIGH SCHOOL DIPLOMA OR G.E.D. EQUIVALENT [APPLICABLE COLLEGE CREDITS/DEGREES CAN LEAD TO HIGHER BASE PAY AND POSSIBLE OFFICER ROUTE], • NO DISQUALIFYING MEDICAL ISSUES [MEDICAL HISTORY CHECK], • NO DISQUALIFYING POLICE INVOLVEMENT [CRIMINAL BACKGROUND CHECK], • MUST MEET PHYSICAL STANDARDS SET BY DOD-US NAVY BENEFITS AND ADVANTAGES OF ENLISTING: • -TRAINING AND EXPERIENCE- ACCESS TO ADVANCED TECHNICAL TRAINING IN FIELDS THAT TRANSLATE INTO COLLEGE CREDITS, LEADERSHIP DEVELOPMENT WITH SUBJECT MATTER EXPERTS, AND SPECIALIZED SKILLS PATHWAYS., • -OPPORTUNITIES FOR FURTHERING EDUCATION-, • US NAVAL COMMUNITY COLLEGE [USNCC]: EARN AN ASSOCIATES DEGREE WITH STACKABLE NATIONALLY RECOGNIZED CREDENTIALS IN AS LITTLE AS 1 YEAR, WHILE ALSO FOLLOWING OUR DEGREE PATHWAYS INTO A FUTURE BACHELOR'S DEGREE., • TUITION ASSISTANCE [TA] AND CREDIT PROGRAMS [CLEP/DANTES]: $250 PER CREDIT HOURS, UP TO $4,500 PER YEAR AND PROGRAMS THAT ALLOW FOR FREE TESTING OUT OF PRE-REQUISITE COURSES. APPLICABLE TOWARDS BACHELOR'S/MASTER'S DEGREE AS WELL AS UP TO A DOCTORATE LEVEL., • POST 9/11 GI BILL: COVERS FULL TUITION FOR COLLEGE AND VOCATIONAL TRAINING WHILE ALSO PAYING FOR COST OF LIVING [*REFER TO 2025 NAVY BAH CHART],, • NAVY CREDENTIALING OPPORTUNITIES ON-LINE [NAVYCOOL]: FREE NATIONALLY ACCREDITED CERTIFICATIONS/ LICENSES AND RENEWALS TO FURTHER VERIFY YOUR EXPERIENCE AND EXPAND YOUR RESUME., • UNITED SERVICES MILITARY APPRENTICESHIP PROGRAM [USMAP]: FREE APPRENTICESHIP PROGRAM THROUGH THE US DEPARTMENT OF LABOR DOCUMENTING SKILLS AND HOURS WORKED- LEADING TO A JOURNEYMAN CARD., • -CAREER ADVANCEMENT- CLEAR PATHWAYS FOR PROMOTION AND CAREER DEVELOPMENT BASED ON PERFORMANCE, TRAINING, AND TIME IN SERVICE. EXPERIENCE THAT IS HIGHLY REGARDED IN CIVIL SERVICE CAREERS, SECURITY CLEARANCES THAT ARE HIGHLY SOUGHT AFTER IN ENGINEERING, INFORMATION TECHNOLOGY AND SECURITY FORCE ROLES, ACCESS TO EXCLUSIVE NETWORKS AND JOB POOLS FOR COMPANIES THAT WORK ALONGSIDE THE FEDERAL GOVERNMENT., • -COMPETITIVE PAY AND BENEFITS- SALARY BACKED BY FEDERAL RESERVE [PAYCHECKS 1ST AND 15TH * REFER TO 2025 NAVY PAY CHART FOR ENLISTED PERSONNEL] WITH OPPORTUNITIES FOR BONUSES, SPECIAL PAY, AND ALLOWANCES [EG. HOUSING, FOOD, CLOTHING]. COMPREHENSIVE HEALTHCARE BENEFITS [MEDICAL, DENTAL, VISION THROUGH TRICARE] FOR SERVICEMEMBERS AND FAMILY., • -RETIREMENT AND QUALITY OF LIFE- 30 DAYS PTO PER YEAR, UNLIMITED SICK DAYS, 5% MATCHING TSP [401K], NO DOWN PAYMENT VA HOME LOAN, CHILDCARE ASSISTANCE, SPOUSAL SUPPORT FOR EMPLOYMENT, $500,000 LIFE INSURANCE POLICY FOR UNDER $35 A MONTH, EXCLUSIVE DISCOUNTS AT A VARIETY OF COMPANIES/STORES, TAX FREE SHOPPING AT NEX/COMISSARY FOR ALL NEEDS, FREE PHYSICAL TRAINING FACILITIES AND RECREATIONAL EVENTS/ TRIPS., • -TRAVEL AND ADVENTURE- OPPORTUNITIES TO EXPERINCE NEW CULTURES; WORLDWIDE TRAVEL AND INTERNATIONAL RECOGNITION.

Company Overview: Welkin Enterprises, LLC, is a Plumbing and Mechanical construction firm specializing in heavy plumbing, fire protection, HVAC, and in-facilities water and wastewater projects. Welkin’s principals have served clients ranging from government agencies to utilities, contractors, and private firms, including the New York City Transit Authority, The Port Authority of NY & NJ, United States Post Office, Long Island Railroad, MTA Bridges and Tunnels as well the NYC Department of Environmental Protection. Welkin Enterprises is poised to grow due to the current emphasis on rebuilding America’s infrastructure as part of renewing our nation’s economy. For the right candidate with the right attitude, we can provide a dynamic job environment with a company that has experienced growth and expects to continue this trend. We offer medical, dental and vision benefits, life insurance, 401(k), and performance bonus incentives. Welkin Enterprises is an equal opportunity employer. Position Overview: Welkin Enterprises is seeking a dynamic, hands-on Project Engineer. Our projects are typically municipal, infrastructure and mechanical construction involving water, wastewater, fire protection and process piping. The Project Engineer will work under the supervision of senior engineers and managers throughout the entire project. The Project Engineer must be extremely detail oriented, with a focus on cost efficiency. Each phase of an operation is evaluated, planned, possibly re-engineered and built with time and budget in mind. The Project Engineer must be energetic, hands-on, willing to learn, adapt, communicate and take pride in his/her work. Primary Job Functions: The Project Engineer will support project management and field operations to ensure projects are successfully completed. Key responsibilities include but are not limited to: • Review project drawings, specifications, and submittals for accuracy., • Prepare and maintain RFIs, logs, and project documentation., • Track material orders, deliveries, and equipment lead times., • Assist with field coordination, providing layout drawings and technical details., • Support the project team with safety compliance and quality checks., • Maintain project records for reporting and client communication., • Provide day-to-day support to field staff and the project manager. Qualifications, Requirements and Education: Required: • Bachelor’s degree in Mechanical Engineering, Civil Engineering, Construction Management, or a related field;, • 1-3 years of relevant experience working in NYC Construction;, • Must exhibit proficiency in basic engineering computations and analysis;, • Must possess the ability to read, understand and interpret engineering drawings;, • Candidate must have excellent communication skills, both verbal and written;, • Knowledge of OSHA safety precautions;, • Candidate must be a citizen of the United States or otherwise authorized to work in the United States on an unrestricted basis. Computer Skills: • Working knowledge of Excel, Word and PowerPoint;, • Working knowledge of AutoCAD or other drafting software.

Job DescriptionDescription: JOB TITLE: Machinist/Programmer Job Summary: We are seeking a skilled Machinist/Programmer to join our team. The ideal candidate will have experience operating and programming CNC machines to produce precision parts. You will be responsible for reading blueprints, setting up machines, programming CNC controls and inspecting parts to ensure they meet specifications. Perform the activities of an expert level CNC programmer and shop leader to machine, program, estimate, and coordinate various products per established facility processes, including set-up, fabrication, and inspection using the operations of CNC mills, lathes, and other equipment. Perform as a key contributor for the new knowledge of programs and projects. Apply knowledge of policies, procedures, and the practical application of general and specific technical aspects of the job to complete varied and complex work. Make recommendations for new procedures. Work independently in established procedures and practices. Lead tasks and mentor others. Due to the nature of work performed within this facility, U.S. citizenship is required. Key Responsibilities: · Program set up, and operate CNC machines (lathes, mills, or grinders) to produce parts according to specifications. · Interpret blueprints, engineering drawings, and CAD models to develop and modify CNC programs. · Select and install appropriate tools, fixtures, and materials for each job. · Perform machine maintenance and troubleshooting to ensure optimal performance. · Inspect finished parts using precision measuring instruments to verify conformance to specifications. · Collaborate with engineering and production teams to optimize machining processes and improve efficiency. · Maintain a clean and safe work environment, adhering to company safety policies and procedures. · Continuously monitor machine operations to detect malfunctions or deviations from specifications. Required Qualifications: · High school diploma or equivalent; technical degree or certification in machining, CNC programming, or a related field is preferred. · Proven experience as a Machinist/Programmer, with a strong background in CNC programming and machine operation. · Proficiency in reading and interpreting blueprints, technical drawings, and CAD models. · Experience with various CNC controls (e.g., Fanuc, Haas, Siemens). · Strong knowledge of machining principles, materials, and cutting tools. · Excellent problem-solving skills and attention to detail. · Ability to work independently and as part of a team in a fast-paced environment. · Good communication skills and a commitment to quality and safety. · Ability to lift and carry up to 30lbs. · Comfortable working in a manufacturing environment with exposure to noise, dust and other industrial elements. · 10 years of experience with programming in computer-aided manufacturing (CAM) software and machining and fabrication principles · 10 years of experience with CNC and manual machinery operations · 5 years of experience with using Mastercam and programing and executing 4th and 5th axis machining operations · 3+ years of experience with estimating CNC machining work and jobs · Ability to review engineering drawings for completeness and interpret geometric dimensioning and tolerancing (GD&T) · Ability to inspect and verify all products by using standard inspection equipment and techniques/CMM (Coordinate Measuring Machine) · Ability to set up and operate manual machine shop equipment, including lathes, milling machines, saws, and power tools · Ability to pay strict attention to detail in a manufacturing environment Why Join U.S Dynamics Corporation? At U.S Dynamics Corporation, you will be a part of a supportive and innovative environment that fosters growth and values your professional development. We offer competitive compensation, comprehensive benefits, and opportunities for advancement. Join us in shaping the future with your talent and expertise. Requirements:

Job Description About Us MAX USA Corp is a leading manufacturer of professional-grade construction and industrial tools, serving customers across North America. Known for innovation, quality, and durability, our products include rebar tying tools, pneumatic nailers, and power-driven fastening systems. We are committed to helping professionals across multiple industries improve productivity and safety on the job. As part of the global MAX Group, we combine a rich history of engineering excellence with a forward-thinking approach to growth and customer satisfaction. Position Overview MAX USA Corp is seeking a driven and experienced Regional Sales Manager to lead sales operations within the Southwest region. This role is responsible for driving revenue growth, managing regional staff, and executing strategic initiatives aligned with the national sales plan. The ideal candidate has a proven history of success in two-step distribution sales, leading teams, and developing strategic sales plans within the industrial tools or construction industry. Key Responsibilities • Own all sales activities, customer relationships, and profitability within the assigned region., • Develop and implement regional and territory-level sales plans., • Grow sales and profit based on National Sales Plan, • Recruit, train, and manage Regional Sales Executives and Jobsite Specialist for region, • Search for new distributors as needed, • Regularly travel within the region to support field teams and customers., • Represent MAX USA Corp at national and regional trade shows and industry events., • Ensure timely and accurate reporting, including expense reports, dealer visit summaries, show reports, CRM updates, and sales confirmations for region., • Manage promotional budget, • Work with Office Manager to collect past due accounts, • Implement MAX programs with accounts (100 PSI, Powerlite, Concrete), • Must follow MAX company regulations, • Collaborate with engineering teams to support product research and field testing., • Ensure adherence to company policies and standards, • Special projects per request Qualifications Education: • Minimum of 5 years of sales experience, with regional or national territory experience preferred., • Proven track record of managing sales teams and achieving sales targets., • Proficient in Microsoft Office Suite and CRM platforms (Salesforce.com preferred)., • Strong leadership and people management skills., • Excellent analytical, organizational, and communication skills., • Ability to develop and execute effective territory management strategies., • Frequent travel within the assigned region, including overnight trips., • Participation in trade shows and jobsite setup/dismantling as needed., • Ability to demonstrate products in field environments., • Capable of lifting and carrying heavy equipment and promotional materials. Location: The candidate must reside in California, Nevada, or Arizona to be considered for this role. Salary: 100k - 160k commensurate with experience and qualifications

Position Title: Manufacturing Engineer Position Description: Protingent Staffing has an exciting Direct Hire opportunity for a Manufacturing Engineer with our client that is in Plainview, NY. Key areas of experience we’re looking for include: • Mechanical assemblies and precision component handling, • Finishing operations for metal and plastic components (cleaning, passivation, electropolishing, etc.), • Heat treating and surface finishing processes, • Medical device packaging and related quality requirements, • Strong familiarity with PPQP (Pre-Production Quality Planning) and other process validation activities (IQ, OQ, PQ), • Lean Six Sigma Green Belt or Black Belt certification (preferred) Job Description: • The Manufacturing Engineer is responsible for developing, implementing, and sustaining efficient, compliant, and cost-effective manufacturing processes in a contract manufacturing environment., • This role supports a wide variation of manufacturing processes, including CNC machining, finishing, secondary operations, and small mechanical assemblies for complex medical device components., • The Manufacturing Engineer ensures compliance with FDA Quality System Regulations (21 CFR Part 820) and ISO 13485 standards while leading process optimization, supporting quotations, and driving continuous improvement initiatives across the value stream. Job Responsibilities: • Process Development & Optimization:, • Develop, validate, and optimize CNC machining, finishing, assembly, and other special processes to meet tight tolerances and medical device requirements., • Lead value stream mapping initiatives to identify waste, streamline workflows, and improve throughput., • Lead and facilitate process FMEAs (pFMEA) to proactively identify and mitigate process risks., • Provide DFM feedback during new product introduction and design transfer activities., • Quoting & Costing Support:, • Assist in quotation and estimating processes by analyzing manufacturing feasibility, cycle times, tooling requirements, and capacity., • Partner with sales, project management, and production teams to ensure accurate and competitive customer proposals., • Compliance & Documentation:, • Ensure all manufacturing processes and documentation comply with FDA QSR, ISO 13485, and internal quality system requirements., • Author and maintain manufacturing documentation, including work instructions, process flow diagrams, PFMEAs, control plans, and validation protocols/reports., • Support internal and external audits, including FDA, ISO, and customer audits., • Validation & Qualification:, • Develop and execute equipment qualifications (IQ/OQ/PQ) and process validation protocols in compliance with regulatory standards., • Collaborate with Quality Engineering to establish process controls, SPC, and robust monitoring systems., • Continuous Improvement & Problem Solving:, • Drive Lean Six Sigma projects to reduce variation, improve yield, and lower manufacturing costs., • Lead structured root cause investigations and implement corrective and preventive actions (CAPA)., • Champion a continuous improvement culture across all manufacturing processes., • Technical Support & Cross-Functional Collaboration:, • Provide hands-on support to production teams for troubleshooting process and equipment issues., • Train operators and technicians on new processes, equipment, and standards., • Collaborate with suppliers, toolmakers, and equipment vendors to qualify and integrate new technologies. Job Qualifications: • Education: Bachelor’s degree in manufacturing engineering, Mechanical Engineering, Industrial Engineering, or related field., • 3–7 years of experience in manufacturing engineering within a regulated environment (medical device preferred)., • Experience across a wide range of manufacturing processes, including CNC machining (multi-axis milling/turning), finishing, deburring, cleaning, passivation, and small assembly., • Strong background in process validation (IQ/OQ/PQ) and regulatory compliance (FDA QSR & ISO 13485)., • Proficient in CAD/CAM and GD&T., • Knowledge of value stream mapping, FMEA, Lean Manufacturing, Six Sigma, and SPC., • Ability to support quotation processes with accurate cycle time and cost analysis., • Excellent documentation, communication, and cross-functional teamwork skills., • Ability to manage multiple projects in a fast-paced, contract manufacturing environment., • Strong problem-solving, analytical, and leadership skills. Job Details: • Job Type: Direct Hire, • Salary Rate Range: $110-130K, • Location: Plainview, New York. About Protingent: Protingent is a niche provider of top Engineering and IT talent to Software, Electronics, Medical Device, Telecom, and Aerospace companies nationwide. Protingent exists to make a positive impact and contribution to the lives of others as well as our community by providing relevant, rewarding, and exciting work opportunities for our candidates.

Job DescriptionQuality Engineer Title: Quality Engineer Location: Old Bethpage, NY Salary: $80,000 - $90,000 For over 50 years, we are a leading independent provider of diffusion and thermal-sprayed enhanced surfaces. As a an innovator in the field of HVOF and plasma thermal spray coatings, diffusion coatings, and coating surface finishing, we prepare critical components for aerospace, transportation, energy, and defense industries. As a Quality Engineer, you will be responsible for the quality systems, process qualifications, nonconformance management, and continuous improvement projects. This individual will leverage quality knowledge to bring new products and processes to market. What You Will Be Doing- Act as lead product and process quality expert for customers and internal organization • Prepare for and manage all source inspections, • Develop, revise, apply and maintain quality procedures, quality plans, documents and work instructions, • Implement methods of procedures for inspecting, testing, and evaluating the precision and accuracy of products and calibration of equipment, • Perform internal & external audits and surveysWhat You Need for this Position- Bachelor's degree in Materials Science, Chemical Engineering, Mechanical Engineering or related field, and/or equivalent experience, • 1+ years of professional experience in manufacturing You should know some of the following: • Manufacturing Quality, • ISO 9001/AS9100, • Lean Six Sigma, • PFMEA, • QMSWhat's In It for You- Competitive base salary and overall compensation package, • Full benefits: Medical, Dental, Vision, • 401 (K) with company match, • Paid time off (PTO), • HSA/FSA, • Life Insurance All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at to make arrangements.

Job Description Machine Shop Production Manager We are seeking a highly experienced and hands-on Production Manager to oversee daily machining operations in a fast-paced, high-mix, low-volume production environment. This role is responsible for coordinating labor, equipment, and workflows to meet production goals while driving safety, quality, and continuous improvement initiatives. The ideal candidate will bring a strong technical background in precision machining, effective leadership skills, and a collaborative mindset to align departmental performance with broader operational targets. This position reports directly to Plant Management and plays a critical role in optimizing throughput and ensuring customer delivery expectations are met. Key Responsibilities ▪ Manage the day-to-day operations of the machine shop, including CNC, conventional, and specialty machining equipment ▪ Oversee production schedules, labor planning, and resource utilization to ensure on-time delivery and operational efficiency ▪ Lead a team of machinists, set-up operators, and technical personnel, providing coaching, support, and performance feedback ▪ Collaborate closely with engineering, quality, maintenance, and planning teams to drive throughput, reduce downtime, and resolve technical issues ▪ Monitor key performance indicators (KPIs) such as safety, quality, delivery, and productivity, and report progress to senior management ▪ Support and participate in process improvement initiatives, root cause analysis, and corrective/preventive actions (CAPA) ▪ Identify capacity constraints, machine performance issues, and labor shortages, and implement timely solutions ▪ Coordinate with the Maintenance team to prioritize urgent repairs and ensure adherence to preventative maintenance routines ▪ Enforce and uphold company safety standards and regulatory compliance in accordance with OSHA and internal policies ▪ Foster a culture of continuous improvement, teamwork, accountability, and professional growth on the shop floor Requirements Machine Shop Production Manager We are seeking a highly experienced and hands-on Production Manager to oversee daily machining operations in a fast-paced, high-mix, low-volume production environment. This role is responsible for coordinating labor, equipment, and workflows to meet production goals while driving safety, quality, and continuous improvement initiatives. The ideal candidate will bring a strong technical background in precision machining, effective leadership skills, and a collaborative mindset to align departmental performance with broader operational targets. This position reports directly to Plant Management and plays a critical role in optimizing throughput and ensuring customer delivery expectations are met. Key Responsibilities ▪ Manage the day-to-day operations of the machine shop, including CNC, conventional, and specialty machining equipment ▪ Oversee production schedules, labor planning, and resource utilization to ensure on-time delivery and operational efficiency ▪ Lead a team of machinists, set-up operators, and technical personnel, providing coaching, support, and performance feedback ▪ Collaborate closely with engineering, quality, maintenance, and planning teams to drive throughput, reduce downtime, and resolve technical issues ▪ Monitor key performance indicators (KPIs) such as safety, quality, delivery, and productivity, and report progress to senior management ▪ Support and participate in process improvement initiatives, root cause analysis, and corrective/preventive actions (CAPA) ▪ Identify capacity constraints, machine performance issues, and labor shortages, and implement timely solutions ▪ Coordinate with the Maintenance team to prioritize urgent repairs and ensure adherence to preventative maintenance routines ▪ Enforce and uphold company safety standards and regulatory compliance in accordance with OSHA and internal policies ▪ Foster a culture of continuous improvement, teamwork, accountability, and professional growth on the shop floor

Job Description **THIS POSITION REQUIRES ENLISTMENT WITH THE DEPARTMENT OF DEFENSE- UNITED STATES NAVY** JOB DESCRIPTION: Over 150 Job positions available to include NUCLEAR ELECTRONICS TECHNICIAN/ NUCLEAR ELECTRICIANS MATE/ NUCLEAR MACHINIST MATE. Apply to see what you qualify for. No experience required; applicants will receive On the Job training. ALL positions come with incentives listed below. ENLISTMENT SIGN ON BONUS THIS POSITION IN THE NUCLEAR FIELD OFFERS A $75,000 SIGN ON BONUS AND OVER $100,000 FOR REENLISTMENT!! REQUIREMENTS: • MUST BE BETWEEN AGES 17-41, • US CITIZEN OR PERMANENT LEGAL RESIDENT [GREEN CARD HOLDER], • MUST HAVE HIGH SCHOOL DIPLOMA OR G.E.D. EQUIVALENT [APPLICABLE COLLEGE CREDITS/DEGREES CAN LEAD TO HIGHER BASE PAY AND POSSIBLE OFFICER ROUTE], • NO DISQUALIFYING MEDICAL ISSUES [MEDICAL HISTORY CHECK], • NO DISQUALIFYING POLICE INVOLVEMENT [CRIMINAL BACKGROUND CHECK], • MUST MEET PHYSICAL STANDARDS SET BY DOD-US NAVY BENEFITS AND ADVANTAGES OF ENLISTING: • -TRAINING AND EXPERIENCE- ACCESS TO ADVANCED TECHNICAL TRAINING IN FIELDS THAT TRANSLATE INTO COLLEGE CREDITS, LEADERSHIP DEVELOPMENT WITH SUBJECT MATTER EXPERTS, AND SPECIALIZED SKILLS PATHWAYS., • -OPPORTUNITIES FOR FURTHERING EDUCATION-, • US NAVAL COMMUNITY COLLEGE [USNCC]: EARN AN ASSOCIATES DEGREE WITH STACKABLE NATIONALLY RECOGNIZED CREDENTIALS IN AS LITTLE AS 1 YEAR, WHILE ALSO FOLLOWING OUR DEGREE PATHWAYS INTO A FUTURE BACHELOR'S DEGREE., • TUITION ASSISTANCE [TA] AND CREDIT PROGRAMS [CLEP/DANTES]: $250 PER CREDIT HOURS, UP TO $4,500 PER YEAR AND PROGRAMS THAT ALLOW FOR FREE TESTING OUT OF PRE-REQUISITE COURSES. APPLICABLE TOWARDS BACHELOR'S/MASTER'S DEGREE AS WELL AS UP TO A DOCTORATE LEVEL., • POST 9/11 GI BILL: COVERS FULL TUITION FOR COLLEGE AND VOCATIONAL TRAINING WHILE ALSO PAYING FOR COST OF LIVING [*REFER TO 2025 NAVY BAH CHART],, • NAVY CREDENTIALING OPPORTUNITIES ON-LINE [NAVYCOOL]: FREE NATIONALLY ACCREDITED CERTIFICATIONS/ LICENSES AND RENEWALS TO FURTHER VERIFY YOUR EXPERIENCE AND EXPAND YOUR RESUME., • UNITED SERVICES MILITARY APPRENTICESHIP PROGRAM [USMAP]: FREE APPRENTICESHIP PROGRAM THROUGH THE US DEPARTMENT OF LABOR DOCUMENTING SKILLS AND HOURS WORKED- LEADING TO A JOURNEYMAN CARD., • -CAREER ADVANCEMENT- CLEAR PATHWAYS FOR PROMOTION AND CAREER DEVELOPMENT BASED ON PERFORMANCE, TRAINING, AND TIME IN SERVICE. EXPERIENCE THAT IS HIGHLY REGARDED IN CIVIL SERVICE CAREERS, SECURITY CLEARANCES THAT ARE HIGHLY SOUGHT AFTER IN ENGINEERING, INFORMATION TECHNOLOGY AND SECURITY FORCE ROLES, ACCESS TO EXCLUSIVE NETWORKS AND JOB POOLS FOR COMPANIES THAT WORK ALONGSIDE THE FEDERAL GOVERNMENT., • -COMPETITIVE PAY AND BENEFITS- SALARY BACKED BY FEDERAL RESERVE [PAYCHECKS 1ST AND 15TH * REFER TO 2025 NAVY PAY CHART FOR ENLISTED PERSONNEL] WITH OPPORTUNITIES FOR BONUSES, SPECIAL PAY, AND ALLOWANCES [EG. HOUSING, FOOD, CLOTHING]. COMPREHENSIVE HEALTHCARE BENEFITS [MEDICAL, DENTAL, VISION THROUGH TRICARE] FOR SERVICEMEMBERS AND FAMILY., • -RETIREMENT AND QUALITY OF LIFE- 30 DAYS PTO PER YEAR, UNLIMITED SICK DAYS, 5% MATCHING TSP [401K], NO DOWN PAYMENT VA HOME LOAN, CHILDCARE ASSISTANCE, SPOUSAL SUPPORT FOR EMPLOYMENT, $500,000 LIFE INSURANCE POLICY FOR UNDER $35 A MONTH, EXCLUSIVE DISCOUNTS AT A VARIETY OF COMPANIES/STORES, TAX FREE SHOPPING AT NEX/COMISSARY FOR ALL NEEDS, FREE PHYSICAL TRAINING FACILITIES AND RECREATIONAL EVENTS/ TRIPS., • -TRAVEL AND ADVENTURE- OPPORTUNITIES TO EXPERINCE NEW CULTURES; WORLDWIDE TRAVEL AND INTERNATIONAL RECOGNITION.

Job Description Certified Group partners with customers to deliver innovative scientific solutions and expertise – So The World Can Trust In What It Consumes™. As a leading provider of laboratory testing, regulatory consulting, and certification & audit services, Certified Group includes Food Safety Net Services (FSNS), FSNS Certification & Audit, Certified Laboratories, EAS Consulting Group, and Labstat International Inc. Certified Group provides analytical testing and regulatory guidance services in the food & beverage, dietary supplements & NHP, cosmetics, OTC, personal care, tobacco, nicotine, cannabis, and hemp industries. We are seeking a highly skilled Quality Assurance Specialist to join our team! In this key role you will work on ensuring compliance with FDA regulations within our industry. The ideal candidate will have extensive experience in managing electronic Quality Management Systems (eQMS), particularly in areas such as Corrective and Preventive Actions (CAPA), Customer Complaints, Out of Specification (OOS) investigations, and conducting Internal Audits. The Quality Assurance Specialist will play a pivotal role in maintaining and improving our quality management processes to uphold the highest standards of product quality and regulatory compliance. Responsibilities: • Assist in the implementation, maintenance, and continuous improvement of the electronic Quality Management System (eQMS) to ensure compliance with FDA regulations., • Lead and coordinate Corrective and Preventive Action (CAPA) processes, including investigation, root cause analysis, implementation of corrective actions, and effectiveness checks., • Handle Customer Complaints and Out of Specification (OOS) investigations, ensuring timely resolution and documentation according to regulatory requirements., • Conduct thorough Internal Audits to assess compliance with established quality procedures, identify areas for improvement, and develop corrective actions as needed., • Collaborate with cross-functional teams to provide quality assurance guidance and support throughout all stages of operation., • Develop and maintain quality-related documentation, including Standard Operating Procedures (SOPs), work instructions, and quality records, equipment maintenance records in accordance with FDA regulations., • Verify that all laboratory instruments and equipment are calibrated and maintained according to established schedules and regulatory standards to ensure accuracy and compliance. Assist in the preparation and hosting of regulatory agency inspections and audits, as well as follow-up activities to address any findings or observations., • Bachelor's degree in a scientific or technical field, such as Chemistry, Biology, Engineering, or related discipline., • 3-5 years of experience in a quality assurance role within an FDA regulated industry, preferably in pharmaceuticals, medical devices, or biotechnology., • Strong understanding of FDA regulations and guidelines, including cGMP, 21 CFR Part 11, and ICH guidelines., • Proven experience in managing electronic Quality Management Systems (eQMS), such as Qualtrax, Intact, or similar platforms., • Proficiency in conducting investigations, root cause analysis, and implementing corrective actions for CAPA, Customer Complaints, and OOS events., • Experience in conducting Internal Audits and familiarity with audit processes and methodologies., • Excellent communication skills, with the ability to effectively collaborate with cross-functional teams and communicate quality requirements to stakeholders at all levels of the organization., • Strong attention to detail and analytical skills, with the ability to analyze complex data sets and identify trends or areas for improvement., • Progressive 401k Retirement Savings Plan, • Employer Paid Short- Term and Long-Term Disability, and Life Insurance, • Group Medical, • Tuition Reimbursement, • Flexible Spending Accounts, • Dental, • Paid Holidays and Time Off, • Many positions which qualify for the company bonus program Certified Group values diversity in its workforce. The company is firmly committed to a policy of Equal Opportunity and will administer its policies in a manner that treats each employee and applicant for employment on the basis of merit. Certified Group will take affirmative action to seek out qualified applicants without regard to race, color, religion, sex, national origin, age, handicap, or veteran status.

Job Description COMPANY OVERVIEW: CERTERRA (formerly RMA Companies) is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, CERTERRA has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. Job Summary: We are seeking a Lab Supervisor to oversee our laboratory operations and ensure the highest quality of testing services. The supervisor will be responsible for supervising staff, assisting the Lab Director in developing and implementing lab policies and procedures, and maintaining compliance with regulatory standards. Qualifications • Associate’s degree in Engineering (preferred)., • Minimum of 3+ years of experience with laboratory testing of construction materials, with at least 1+ years in a supervisory or managerial role, • Strong knowledge of laboratory operations, quality control, and regulatory requirements, • Excellent leadership, communication, and problem-solving skills., • Oversee daily operations of the laboratory, including scheduling, staffing, equipment calibration and verification, and workflow management, • Assist Lab Director in developing and implementing lab policies, procedures, and quality assurance programs, • Ensure compliance with regulatory standards, accrediting agencies, and best practices, • Lead and mentor laboratory staff, providing training and guidance as needed, • Collaborate with other departments to ensure seamless integration of lab services, • American Concrete Institute (ACI) Certifications:, • Aggregate Testing Technician - Level 1 or 2, • Aggregate/Soils Base Testing Technician, • Concrete Strength Testing Technician, • Concrete Field-Testing Technician - Grade 1, • Concrete Laboratory Testing Technician - Level 1 or 2, • Familiarity with Lab Information Management Systems (LIMS)

Job Description COMPANY OVERVIEW: CERTERRA/ Big Apple Group (formerly RMA Companies) is a growing national provider of testing, inspection, and certification services that support innovation in new product development, quality assurance, for project delivery, and engineered solutions for asset management. We are passionate about contributing to the sustainable development of the communities we serve. We are a national firm with a global reach serving national and international clients from 30+ offices located in 10 states and are ranked on ENR’s Top 500 list alongside the nation’s top firms. With a 60-year history, CERTERRA has a passion for high-end services, constant innovation, and investment in the development of world-class laboratory facilities, and interactive management technologies. Each member of our staff is committed to service, innovation, and the success of our clients. Job Summary: We are seeking a Professional Engineer to perform Special Inspections (Geotechnical), oversee our laboratory operations and ensure the highest quality of testing services. The will be responsible for managing lab staff, developing and implementing lab policies and procedures, and maintaining compliance with regulatory standards. Qualifications • Bachelor's degree in Engineering., • Minimum of 5 years of experience in Special Inspections (Geotechnical)., • Minimum of 7 years of experience with laboratory testing of construction materials, with at least 3+ years in a supervisory or managerial role, • Strong knowledge of laboratory operations, quality control, and regulatory requirements, • Excellent leadership, communication, and problem-solving skills., • Special Inspections (Geotechnical) in the greater NYC-Metro (2-3 Days Per Week), • Serve as Technical Director for the company’s licensed Concrete Testing Lab., • Oversee daily operations of the laboratory, including scheduling, staffing, and workflow management, • Develop and implement lab policies, procedures, and quality assurance programs, • Ensure compliance with regulatory standards, accrediting agencies, and best practices, • Lead and mentor laboratory staff, providing training and guidance as needed, • Collaborate with other departments to ensure seamless integration of lab services, • Evaluate new technologies and methodologies to enhance lab operations and testing capabilities, • Participate in budget planning and monitor expenses to meet financial goals, • American Concrete Institute (ACI) Certifications:, • Aggregate Testing Technician - Level 1 or 2, • Aggregate/Soils Base Testing Technician, • Concrete Strength Testing Technician, • Concrete Field-Testing Technician - Grade 1, • Concrete Laboratory Testing Technician - Level 1 or 2, • National Institute for Certification in Engineering Technologies (NICET):, • Construction Materials Testing: Asphalt, Concrete, Soils (Levels I, II, or III), • NJSAT Certifications:, • Licensed Professional Engineer in NY (required), • Licensed Professional Engineer in NJ, in addition to NY is highly preferred

Job DescriptionTech/Electronics company located in Plainview NY is looking for a Production Engineer to join their team. Full benefits including 26 days off the first year and bonus. Being the Production Engineer, you will help with the engineering and quality agenda with the overall goal to improve the customer satisfaction. You are the main contact towards the suppliers and work as part of the business team together with the supplier to develop and secure the production process, handling of quality deviations, and secure compliance to all company requirements. About the assignment: The Production Engineer is responsible for Quality Assurance including to secure process control for key processes in production. Among other things, you:• Develop new manufacturing processes, and equipment to ensure manufacturing is efficient and effective.• Investigate and analyze problems and derive solutions in the manufacturing process.• Transfer R&D prototypes into series production phase and document the manufacturing processes.• Perform and create First Article Inspection Documents. • Perform Product audits and production risk assessments at suppliers • Develops the recipe with suppliers to match desired taste profile quality and nutrition. • Lead the Supplier Development for quality and manufacturing with responsibility to identify and implement actions and execution of SDP projects. • Lead industrialization of minor news development and contribute with competence to other new developments. Knowledge about Total Quality Management - University degree in Engineering or correspondingPrevious experience as Process or Production Engineer in manufacturing PreferredExperience of industrial production conditions and Lean manufacturing Contact Michael Panter for more details:

Position Overview The Director of Product Development & Sourcing will drive TYR’s global product creation process with a strong focus on vendor management, sourcing strategy, and supply chain performance. This leader will oversee the product development and sourcing teams, build and optimize global vendor partnerships, and ensure the seamless execution of innovative, cost-effective, and high-quality products across multiple categories. The Director will be a strategic partner to design, merchandising, and operations, ensuring products meet TYR’s high performance standards while hitting commercial and financial goals. Key Responsibilities • Lead the sourcing strategy across apparel, footwear, swimwear, and hardgoods, ensuring alignment with cost, quality, capacity, and lead-time objectives., • Build, manage, and strengthen long-term partnerships with overseas vendors and factories; evaluate, onboard, and rationalize vendors to ensure optimal performance., • Negotiate vendor contracts, pricing, capacity commitments, and service level agreements to deliver best value and mitigate risk., • Partner with design and merchandising teams to align sourcing strategies with brand and product vision., • Direct vendor allocation decisions, balancing speed-to-market, cost efficiency, and innovation opportunities., • Ensure vendors meet compliance standards, including ethical sourcing, labor practices, and product safety requirements., • Oversee raw material sourcing, fabric development, and trim management to ensure quality, consistency, and innovation., • Monitor global supply chain trends, tariffs, logistics challenges, and raw material markets to proactively manage risk and recommend solutions., • Drive continuous improvement with vendors in the areas of lead time reduction, innovation, and production efficiency., • Manage and mentor the internal product development and sourcing teams to ensure effective communication and execution of development calendars., • Oversee the product commercialization process, ensuring smooth transitions from design to production, on-time delivery, and adherence to quality standards., • Lead cost engineering initiatives to improve margins while maintaining brand integrity and performance expectations. Qualifications • Bachelor’s degree in Supply Chain, Business, Product Development, or related field., • 5-10 years of progressive experience in product development, sourcing, or supply chain management, preferably in performance apparel, footwear, and/or sporting goods., • Proven success in global vendor management, sourcing strategy, and negotiation., • Deep knowledge of overseas manufacturing markets (Asia and beyond), supply chain dynamics, and compliance requirements., • Strong leadership experience managing cross-functional teams., • Demonstrated ability to drive cost savings, improve vendor performance, and deliver innovative products., • Excellent communication, relationship-building, and conflict-resolution skills., • Strong analytical and project management skills with ability to handle multiple priorities in a fast-paced environment., • Passion for sports, fitness, and performance innovation.

Job Description About Metro Environmental Services: Trusted since 2002, Metro Environmental Services (MES) is an industry-leading environmental and construction organization providing full-service solutions for clients who store, consume, or sell petroleum products from Delaware to Massachusetts. Without our teams MES would not be able to deliver the consistent and unparalleled service to our clients that we do today. Our business has grown exponentially over the last 10 years and so have our team members. We pride ourselves on putting our employees first, valuing their skills and listening to their feedback. You’re joining a team that works hard, is eager for greater success and that values your life outside of the office. If you’re a team player, who enjoys working in a fast-paced environment with great support, consider applying to one of our open roles. Your Primary Focus: As Chief/Senior Estimator you are a Leader who will lead our estimating function reporting directly to the MES executive leadership. You’ll be responsible for overseeing complex, high-value bids across multiple projects concurrently while managing a small team of Estimators. You are responsible for driving cost efficiencies, committing to only submitting proposals that reflect our commitment to technical excellence, quality, profitability and mentoring your direct reports. This is a critical role that will have significant influence over project success, client satisfaction and bottom-line performance. You’ll be joining a well-established leadership team and be accountable for current and future team and company growth. It’s vital that the Chief/Senior Estimator is forward-thinking, decisive and readily able to communicate clearly to internal and external clients. What You’ll Be Responsible For: • Responsible for overseeing the estimating process and the estimating team ensuring the department is consistently meeting and exceeding their goals by performing regular reviews of their team., • Prepare, review and sign off on estimates and bids for the construction and service business units as required prior to submitting to customer., • Work collaboratively with cross-functional teams to ensure accurate preparation and final evaluation of bids to increase bidding efficiency in both percentage of profitability and percentage of jobs won., • Lead frequent (at least weekly) estimating meetings internally to review status of open bids and other department related items to ensure the appropriate estimating methods and resources are being utilized for the estimates needed., • Review and approve preliminary schedules, indirect costs, staff and execution plans with deep understanding of company policy on project cash flow and ensure that billing schedules and cash flow diagrams meet the requirements., • Manage CRM software and ensure new customers are added, the bid log is updated accurately and bid results/feedback are properly maintained while serving as the sales contact for select customers and clients served by MES., • Coordinate estimating transfer meetings for all awarded projects with the construction/service team and assigned estimator to ensure seamless project continuation., • Confidently following up with telephone calls to customers and clients to inquire about estimates that were previously sent., • Obtains prices from vendors and subcontractors for materials, equipment and services., • Provide guidance on how to overcome project document deficiencies, including scope clarifications, and identifying project risk and pricing., • Assist with the development of new processes and procedures to improve our estimating and proposal efforts. Including the review and incorporation of historical data into unit and man-hour figures for estimates., • 7+ years’ experience as an estimator, including 3+ years of previous management experience within commercial and/or industrial industries, • Can visualize the finished product from drawings and other documents provided to support their ability to manage and generate project estimates for projects ranging from $25,000 up to $5,000,000., • Must have strong understanding of material costing and be familiar with Cost Estimating Software, • Is a team player who can manage a team, successfully complete their job duties and meet deadlines., • Delegates work to ensure deadlines are met, efficiency is optimized, and decision-making is swift., • Proficient with MS Office Suite with advanced knowledge of Excel., • Is comfortable influencing decisions on which projects to pursue., • Will thrive in a fast-paced, multi-project environment with high expectations and defined outcomes., • Medical, Dental, Vision and supplemental coverage from AFLAC, • 401(k) with a company match and no vesting period, • 100% company funded life insurance, • Vacation and sick time, • Generous holiday schedule, • Flexible office work hours Pump and Tank Construction | Environmental Remediation | General Construction | Fuel Facility Maintenance | Tank and Line Testing | Environmental Compliance and Engineering | Groundwater Sampling and Soil Boring We have many long-term employees; however, due to our success and growth, we are seeking candidates for many new opportunities. This is an exciting, thriving Company with a proven track record. Come join us!Trusted since 2002, Metro Environmental Services (MES) is an industry-leading environmental and construction organization. We offer full-service solutions for clients who store, consume, or sell petroleum products from Delaware to Massachusetts. Our services include:\r\n\r\nPump and Tank Construction | Environmental Remediation | General Construction | Fuel Facility Maintenance | Tank and Line Testing | Environmental Compliance and Engineering | Groundwater Sampling and Soil Boring\r\n\r\nWe have many long-term employees; however, due to our success and growth, we are seeking candidates for many new opportunities. This is an exciting, thriving Company with a proven track record. Come join us!

Job Description Job Summary We are seeking an experienced Construction Superintendent to join a Long Island based contractor for a long term, career opportunity. The Construction Superintendent will be responsible for running interior and exterior renovation projects in the New York City area. Job Duties and Responsibilities • Manage the daily construction operations and work with the Owner and Owner’s Representatives., • Coordinate the various subcontractors on the project., • Oversee subcontractor’s work to avoid any potential conflicts in the execution of their work., • Review plans and specifications to identify issues and conflicts., • Maintain project requirements and timelines., • Respect the schedule, quality and cost control to meet project deadlines., • Communicate, monitor and supervise all material deliveries to the job site., • Act as principal point of contact for multiple construction projects. Required Qualifications • College graduate with 3+ years of Building and Renovations experience managing multiple commercial/residential projects (required), • OSHA 40 Hour SST Certificate (required), • NYC Construction Superintendent License (preferred but not required), • Strong proficiency with Microsoft Office suite including Microsoft Project and Excel, • Ability to read architectural drawings / plans, • Organized, detail oriented and able to manage multiple projects, • Ability to problem solve and multi-task successfully, • Lead and work well with others as a team player. Salary: $80,000 - $100,000 Company Overview IslandSearch Group, Inc. D/B/A ISG Consultants is an architecture, engineering, construction and environmental consulting and staff augmentation firm that was established in 2018. As a certified MBE, DBE and SBE firm, we have over 26 years of experience providing professional staff in support of programs and projects within the public and private sectors in the Tri-State area. Please apply directly to if you have an interest in exploring this opportunity. IslandSearch Group, Inc. D/B/A ISG Consultants is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, creed, religion, national origin, ancestry, marital status, sex, affectional or sexual orientation, gender identity or expression, or protected veteran status; and will not be discriminated against based on disability.

Join us as a Component Engineer to lead electronic part control and innovation in cutting-edge technology projects!. Discrepant Material Management: Generate and resolve Discrepant Material Reports (DMRs), coordinating with Engineering, Material Control, and Quality Assurance teams. Part Performance

Job Description Land Surveyor – Project Manager Professional Land Surveying- Civil Engineering- Land Development Our client in the local area is actively seeking to add an experienced Land Surveyor Project Manager to oversee the planning, coordination, and execution of surveying projects from start to finish. The ideal candidate is a licensed Professional Land Surveyor (PLS) or Surveyor-in-Training (SIT) working toward licensure, with strong technical knowledge, leadership skills, and client communication abilities. The Project Manager will lead survey teams, manage project budgets and schedules, coordinate field and office operations, and ensure all deliverables meet professional standards and client expectations. Responsibilities: • Manage multiple land surveying projects including boundary, topographic, and construction layout surveys., • Prepare project proposals, budgets, scopes, and schedules., • Supervise field and office personnel to ensure accuracy, timeliness, and compliance with quality standards., • Coordinate with civil engineers, architects, contractors, and clients throughout project lifecycles., • Oversee data processing, drafting, and final map preparation using CAD and GIS software., • Maintain organized project documentation and ensure adherence to legal and technical standards., • Perform and oversee complex boundary analysis, deed research, and control network adjustments., • Provide technical guidance to survey crews, technicians, and CAD staff., • Ensure all projects comply with local, state, and federal regulations, as well as company QA/QC procedures., • Serve as the primary point of contact for clients and regulatory agencies., • High School Diploma required, Associate or Bachelor’s degree in Land Surveying, Geomatics, Civil Engineering, or related field a plus, • Professional Land Surveyor (PLS) license preferred (or ability to obtain within 12 months)., • SIT (Surveyor-in-Training) candidates with relevant experience encouraged to apply., • Minimum of seven (7) years of progressive experience in land surveying, including project management or supervisory responsibilities., • Strong experience with boundary resolution, as-builts, construction layout, and topographic mapping., • Proficiency with AutoCAD Civil 3D, • Knowledge of GPS/GNSS, robotic total stations, and data collection systems., • Excellent analytical, organizational, and communication skills., • Valid driver’s license and clean driving record., • Ability to manage multiple projects and priorities simultaneously. Alex Showers Liberty Personnel Services #CivilEngineering Key Words: (Professional Land Surveyor, Survey Boundary Analysis, Topography, Surveying, Surveyor, PLS, Stakeout, Site Work, ALTA, ACSM, Land Development, GIS, Land Surveying, Project Manager, AutoCAD 3D, Trimble, Total Stations,)

Job Description About Us: We are a leading surveying and geospatial solutions provider dedicated to delivering accurate and reliable data to support various industries such as construction, land development, and infrastructure projects. We are committed to excellence in surveying services and are seeking a highly skilled and licensed Professional Land Surveyor to join our team. Position Overview: As a Professional Land Surveyor working with our team in Hicksville, NY, you will play a key role in leading surveying projects, overseeing survey teams, and ensuring the accuracy and compliance of survey data. The ideal candidate will have a strong background in land surveying, a current Professional Land Surveyor license, and the ability to provide expert guidance to support the success of our projects. Key Responsibilities: • Lead and manage land surveying projects, from initiation to completion, ensuring compliance with industry standards and regulations., • Oversee successful boundary surveys, topographic surveys, and construction staking in accordance with project requirements., • Review and interpret legal documents, including deeds, plats, and easements., • Provide expert guidance on complex surveying issues and offer solutions to ensure accurate and reliable data collection., • Supervise and mentor surveying team members, including Survey Party Chiefs, CAD Technicians, and Survey Technicians., • Oversee the preparation of survey deliverables, including plats, maps, and drawings., • Collaborate with clients, engineers, and other stakeholders to understand project goals and expectations., • Ensure the quality control of survey data, including the review of field notes, sketches, and calculations., • Stay informed about industry advancements, regulations, and emerging technologies in land surveying., • Bachelor's degree in surveying, civil engineering, or a related field., • Professional Land Surveyor (PLS) license in NY, • Minimum of 10 years of experience in the Civil Engineering and Land Surveying Industry., • Strong understanding of land surveying principles, methodologies, and best practices., • Proficiency in the use of surveying equipment, including total stations and GPS., • Excellent leadership and communication skills., • Familiarity with relevant state and local regulations and surveying standards.

Job DescriptionBenefits: • 401(k) matching, • Competitive salary, • Dental insurance, • Health insurance Company Overview: Harlequin Design New York Inc. is a leading design and fabrication agency specializing in creating innovative and high-quality installations for various industries, including retail, hospitality, and commercial spaces. We pride ourselves on our creativity, attention to detail, and commitment to excellence. Job Summary: The Installation Manager will oversee all aspects of the installation process for projects managed by Harlequin Design. This role requires a blend of technical expertise, project management skills, and leadership to ensure installations are completed on time, within budget, and to the highest quality standards. Key Responsibilities: • Project Oversight: Manage the installation process from pre-installation planning to project completion, ensuring alignment with design specifications and timelines., • Team Leadership: Lead and supervise installation teams, providing training, guidance, and support to ensure high performance and safety standards., • Client Liaison: Serve as the primary point of contact for clients during installations, addressing any concerns and ensuring client satisfaction throughout the process., • Coordination: Collaborate with designers, project managers, and other stakeholders to coordinate logistics, schedules, and resources for each installation project., • Quality Control: Conduct on-site inspections to ensure installations meet quality standards and specifications. Identify and resolve any issues that arise during the installation process., • Budget Management: Monitor project budgets and resource allocation, ensuring cost-effective solutions without compromising quality., • Documentation: Maintain accurate records of installation processes, changes, and project completion for future reference and reporting., • Health & Safety Compliance: Ensure all installation activities comply with relevant health and safety regulations and industry best practices.Qualifications:, • Bachelors degree in a related field (Architecture, Design, Engineering, or Project Management) preferred., • Proven experience in installation management, preferably in a design or fabrication environment., • Strong knowledge of construction and installation processes, materials, and techniques., • Excellent organizational and multitasking skills with a keen attention to detail., • Strong communication and interpersonal skills, capable of working effectively with diverse teams and clients., • Ability to solve problems quickly and efficiently., • Proficiency in project management software and tools., • Valid drivers license and ability to travel to various job sites in the NYC area.What We Offer:, • Competitive salary and benefits package., • Opportunities for professional development and career growth., • A creative and collaborative work environment., • The chance to work on exciting projects with a talented team.If you are a proactive and results-oriented professional with a passion for design and installation, we invite you to apply for the Installation Manager position at Harlequin Design New York Inc. Join us in shaping exceptional spaces!

Job DescriptionJob Description Schivo Medical located in Plainview New York, manufactures a diverse range of essential medical technology solutions. Working with us, you will be manufacturing or supporting the manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world’s greatest medical challenges. You will be part of a company committed to helping you build a fulfilling and rewarding career. Job Summary: The Manufacturing Manager is responsible for the management and oversight of Production Operations for our Plainview facilities. This role ensures that all Manufacturing activities meet customer requirements, quality standards, and regulatory requirements (e.g., FDA, ISO 13485). The ideal candidate will have strong leadership skills, a deep knowledge of manufacturing processes, and a commitment to continuous improvement in a fast-paced environment. Key Responsibilities: • Manufacturing Management, • Lead all Manufacturing operations to meet and exceed KPIs in productivity, quality, cost, safety, and customer service., • Build and maintain an effective operations management system grounded in Lean and Growth principles., • In conjunction with site leadership, deliver on the site’s Annual Operating Plan, aligning with broader business goals., • Compliance & Quality, • Ensure adherence to FDA regulations, ISO 13485 standards, and Good Manufacturing Practices (GMP)., • Work closely with Quality Assurance and Regulatory teams to support audits, validations, and documentation., • Drive manufacturing team level engagement, resolve people issues proactively, and promote a positive, accountable team culture., • Manage and develop a high-performing team, ensuring the right skills, behaviours, and mindset are in place., • Lead, coach, and develop a team of supervisors, technicians, and operators. New Product Introduction In conjunction with engineering and quality, the introduction of new products, processes, and technologies into manufacturing. Qualifications: • Bachelor’s degree in engineering, Manufacturing, Life Sciences, or a related field., • 5+ years of experience in a medical device or regulated manufacturing environment, with at least 2 years in a leadership role., • Skilled in developing cross-functional teams and building organizational capability., • Strong knowledge of FDA 21 CFR Part 820, ISO 13485, and GMP requirements., • Familiarity with Lean manufacturing principles; hands-on Lean experience highly desirable Proven ability to manage teams and meet Manufacturing targets in a highly regulated industry., • Proficient in SAP ERP, Microsoft systems and comfortable operating in a data-driven, KPI-focused culture. Preferred Skills: • Lean/Six Sigma certification (Green Belt or higher)., • Strong problem-solving, communication, and interpersonal skills, • Experience working in a CNC Production facility a plus Work Environment: • Primarily manufacturing floors with some office work., • Use of personal protective equipment (PPE) and adherence to cleanroom protocols as required., • 401(k), • 401(k)match, • Dental insurance, • Health insurance, • Vision insurance, • Generous Paid time off, • Employee referral program, • EAP Program, • Free coffee & tea daily Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Demonstrated ability to effectively lead, direct, and train others in a store setting. Demonstrated team player able to both lead and follow. As a leading designer, manufacturer, distributor, and retailer of bedding products worldwide, we know how crucial a good night of sleep is to overall health a

Oversee all aspects of engineering, to include engineering costs, quality and quantity of department production, and effective use of employee work hours and employee skills. Develop and maintain applicable procedures and work instructions to ensure high quality, efficient and repeatable engineering

CSC Holdings, LLC seeks a Director of Solution Engineering to provide technical support to the Product Management team in the creation and lifecycle maintenance of B2B and B2C product suites. Collaborate with internal Engineering and Architecture teams to ensure alignment of platforms and tools with

Establish and monitor overall performance for product and quality standards; recommend process improvements / quality control programs. Bachelor's degree in engineering, Manufacturing Engineering preferred, or other technical related discipline is required; MBA or other relevant advanced degree is p

Oversee all aspects of engineering, to include engineering costs, quality and quantity of department production, and effective use of employee work hours and employee skills. MODERN PACKAGING representative as lead technical advisor on product quality and cost control teams. Develop and maintain app

The Varsity Tutors Live Learning Platform has thousands of students looking for online Engineering tutors nationally. Expertise in Engineering and the ability to explain concepts clearly.

The Quality Engineer position will work closely to solve quality problems and support new development programs, legacy programs, and conduct internal audits. Provide quality function support by working closely with Sales, Engineering, and Manufacturing to manage customer relations, expectations, nee

We are currently opening a new HQ in Stamford CT and are looking for the best and brightest PV engineers / installers to join our engineering and quality assurance team. Provide timely and effective support to sales representatives and installation teams via phone, addressing questions and providing

If you want to be a part of this groundbreaking work, please apply! The Temp, Global Development Quality Management (GCP) acting as a Quality Management Lead (QML) is a key position that will provide guidance and leadership for all aspects of quality and compliance within Global Development Quality

LiRo Quality Management System (QMS) across all Business Units (which includes 1,000+ staff in Architecture, Construction Management, Engineering, Environmental, MEP, Resident Engineering Inspection, and Virtual Design services). Construction Quality Assurance and Quality Control Professional. Provi

Lead quality initiatives to reduce scrap and rework by developing and facilitating cross-functional teams. Working closely with Engineering to ensure that designs meet applicable quality requirements. Provide quality function support by working closely with Sales, Engineering, and Manufacturing to m

As the Engineering Operations Manager, you will lead engineering operations across the Mid-Hudson Valley (MHV) and broader Americas region. Facilities Engineering role or technical leadership roles. This role requires a strategic leader, while operating in a fast pace enviroment with a deep technica

Bachelor's Degree in Engineering or Engineering Technology highly preferred.

The Industrial Engineer will be responsible for managing inventory and production, cost control, lean manufacturing initiatives, ISO and quality systems, environmental health and safety, and regulatory compliance. Driving operational efficiency, cost savings, and high-quality output through lean man

Support concurrent engineering efforts by participating in design development projects as needed, representing quality assurance and the customer. Interface with supplier and customer quality representatives regarding quality issues and assure that effective corrective action is implemented. Ensures

Significant experience developing, leading, or managing quality management programs, with proven expertise in connecting quality objectives to supply chain strategies and broader business goals. Gartner Analysts are industry thought leaders who create must-have research, market predictions and best

Collaborate with engineering teams on new designs, prototypes, and process improvements. Take lead on high-mix, low-volume complex builds and non-standard assemblies. Lead root cause analysis of assembly-related defects and develop corrective actions.

Act as lead product and process quality expert for customers and internal organization. Develop, revise, apply and maintain quality procedures, quality plans, documents and work instructions. Bachelor's degree in Materials Science, Chemical Engineering, Mechanical Engineering or related field, and/o

Are you ready to build your career by joining Utilities Solutions Company? If so, our client is hiring a Quality Assurance Manager. Position Type: Direct Hire Hybrid Required: Must have minimum 710 years of experience in quality management within the electric utility or energy sector.

Bachelor's Degree in Engineering or Engineering Technology highly preferred OR High School Diploma and a minimum of 8 years prior relevant experience or associate's degree with a minimum of 5 years prior related experience. LHH Recruitment Solutions has an Engineering Technician role for our client

Bachelor's degree in engineering discipline or closely related field of study plus at least three years of full-time professional experience in quality management related field such Quality Assurance, Quality Control, or process improvement. American Society for Quality (ASQ) Certified Quality Audit

Assist Quality Assurance Manager in establishing, implementing and maintaining the quality management system. Support the Quality Inspectors to ensure that products and processes comply with the relevant requirements of the quality management system. Spearhead quality related projects as determined