Veteran engineering and technology jobs in Hicksville, New YorkCreate job alerts

Job DescriptionCompany Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: Under the direction of the Operations Supervisor, Operations Lead Personnel and in coordination of fellow Operations Personnel the incumbent will perform a variety of basic tasks relevant to the day-to-day operation of the wastewater treatment plant facilities, processes and equipment, including process and equipment rounds, recording operations data and information, making observations and reporting on variations in operating conditions, maintaining logs and other required reports and forms, and provides input for corrective actions and implements corrective actions as directed. Assist Operations in efforts to maintain efficient and cost-effective facility operations while maintaining compliance with all Corporate and Regulatory environmental, health and safety rules and requirements. Primary Duties/Responsibilities: • Works a scheduled shift and will be subject to required emergency call in or shift coverage as Operational needs demand., • Under the direct Supervision of Shift Supervisor or Lead person may be required to perform some of the following tasks depending on the station assigned for that shift:, • Record and Read meters for (pumps, gauges, motors etc.…) in accordance with all regulatory requirements., • Record tank levels, sludge blanket levels., • Operate equipment pertinent to assigned workstation (GBT, BFP, overhead lifting jib crane, pumps), • Open, close and adjust valves for tanks & pumps., • Observe their process areas (pumps, motors, valves, sewage color, odor, flow) record their findings., • Collect samples for laboratory analysis., • Receive chemicals in bulk, drum and tote form., • Adjust / bleed pumps as directed., • Keep the workstation and surrounding area safe and clear of debris., • Inspect equipment for proper functionality and refer to Maintenance for any necessary repairs., • Maintain a logbook for the station they are operating., • Create work requests for equipment found to be malfunctioning or broken., • Make adjustments to equipment to optimize the operation (GBT & Dewatering)., • Work is performed both inside and outside with exposure to all kinds of weather conditions., • Incumbents may be occasionally exposed to some noise, silica, dust, fumes, smoke, gases, greases, oils, electrical energy, solvents and vibration., • Incumbents may work on slippery/uneven surfaces, around machinery with moving parts, moving objects/vehicles, ladder/scaffolding, below ground and may be exposed to water or other liquid materials., • Maintain a high level of focus on health, safety and environment, ensuring safety within all activities.Qualifications Education/Experience/Background: • High School Diploma/GED is required., • Requires good reading, math, writing, and verbal communication skills., • Ability to read, and record data from meters, gauges, scales, panels, computer consoles, and other equipment., • Ability to understand/execute written and oral instructions, read/understand technical instructions., • Ability to interpret data and information from technical service manuals and drawings., • Knowledge of Windows, Google Workspace, MS Office Suite, and other computer-based systems., • Knowledge of basic laboratory sampling, testing and documentation., • Ability to adjust chemical feeds and processing equipment as directed to maintain compliance., • Basic knowledge of wastewater treatment equipment and processes., • Must have the ability to maintain effective working relations w/management, supervisors, and staff., • Must be able to work as a team in a teamwork-oriented environment., • Must be safety conscious and able to work independently with little or no supervision., • Valid NYS Driver’s license and the ability to meet risk management guidelines., • Possesses valid NY State Class 1A Wastewater Treatment License is preferred or ability to attend classes required for obtaining valid NY State Wastewater Treatment license and obtain license within 24 months. Additional Information Pay Rate: $22.91 per hour. Benefits: Our employees are covered by comprehensive benefits packages including paid time off policies; health, dental, vision, and life insurance; retirement plans, savings accounts; tuition reimbursement; paid volunteering and more. We are an Equal Opportunity Employer! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law.

The Manufacturing Engineer must have the ability to analyze problems and processes and offer solutions or work with senior engineers to implement solutions. Experience working with electronics, computers, automotive or robotics or similar technology field required. Compensation will be based on experience and qualifications and will be discussed during the interview process. The salary range for this role is $105,000 - $120,000 annually and offers a competitive benefits package. #LI-KR1 Every day at Hubbell is different and you'll contribute in many ways. On any given day, you'll make a difference by: • Assists in planning and designing processes for an electronics manufacturing facility ., • Maximizes efficiency by analyzing layout of equipment, workflow, assembly methods, and work force utilization in an electronic environment., • Daily tasks will involve working hand in hand with production in an Electronic Metering Production Department, • Determines the parts, equipment, and tools needed to achieve manufacturing goals according to product specifications., • Generates, reviews and updates work instructions and procedures as necessary to improve cycle times, cost and quality., • Works on projects/matters of limited complexity in a support role with other departments to assist in cost reduction and cycle time improvement., • Assists engineering with Prototype builds and creates all necessary documentation to transition product to production., • Assist production with ERP system (Netsuite/SAP) as necessary to ensure inventory and work orders are properly processed., • Bachelor's degree in manufacturing engineering/Mechanical Engineering or similar technical area., • 3-5 years' Experience in an electronics manufacturing environment where electrical testing of Printed Circuit boards and/or finished goods is performed, • Lean Six Sigma/5s Tools a Plus., • Experience with wiring, cable assemblies, PCB's, soldering and mechanical assembly of electronics strongly recommended., • Netsuite experience a plus, or ability to learn new software to assist production Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Job Location(s) US-NY-Old Westbury Job ID 2026-4454 Division School of Health Professions Position Type Adjunct Type Adjunct Category School of Health Professions New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The Doctor of Physical Therapy Program at New York Institute of Technology in Old Westbury invites applications for an adjunct faculty position with expertise in clinical anatomy and dissection to assist in the lab portion of the Gross Anatomy course. Applications are now being accepted with an anticipated start date of May 18, 2026.Responsibilities:Collaborate with the primary course instructor to design a class schedule, lectures, activities, assignments and relevant grading rubrics that meet the course objectives and syllabus requirements. (Please note that all assignments and practical examinations must have grading rubrics.) • Collaborate with the primary instructor to create examinations to evaluate student knowledge., • Prepare current and evidenced based teaching materials for course., • Evaluate students and provide appropriate feedback to students., • Be available via email and by appointment, to meet with students. Extensive knowledge in human gross anatomy. NYS License to practice physical therapy preferred. Must be a professional in good standing. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank.

Are you looking to Optimize your life? Start your exciting path to a rewarding career today! We are Optimum, a leader in the fast-paced world of connectivity, and we're on the hunt for enthusiastic professionals to join our team! We understand that connectivity isn't just a luxury anymore - it's a necessity that empowers lives, fuels businesses, and drives innovation. A career at Optimum means you'll be enabling progress and enhancing lives by providing reliable, high-speed connectivity solutions that keep the world connected. We owe our success to our amazing product, commitment to our people and the connections we make in every community. If you are resourceful, collaborative, team-oriented and passionate about delivering consistent excellence, Optimum is the Company for you! We areOptimum! The Vulnerability Management Manager is responsible for identifying, assessing, prioritizing, and driving remediation of security vulnerabilities across the organization's infrastructure, applications, and endpoints. This role partners closely with IT operations, engineering, architecture, and security teams to ensure timely patching, risk reduction, risk remediation, and compliance with security standards and regulatory requirements. The role requires an individual with strong communication and organizational skills, and the technical capability to understand, interpret, and prioritize vulnerability findings. • Leads and manages the Vulnerability Management program, • Oversee strategic development of the team, including general administrative tasks such as employ work schedules, delegating responsibilities, and ensure team is meeting goals as defined by the Product and Technology organization, • Develop and oversee a patch management program, • Communicates key findings, road blockers, major risks etc. to the Vulnerability Management Steering Committee and corporate leadership in a timely manner, as required, • Fulfils all compliance and audit responsibilities, as related to the position, • Develops and drives program strategy, roadmap, and objectives, in alignment with organizational policies and goals, • Establishes workstream and communication channels between relevant teams such as Threat Intelligence and Security Operations Center, • Evaluates and adjust current program framework, on an annual basis, to ensure security controls enforced are in alignment with industry and organization best practices, • Administration of vulnerability management reporting and tracking tools, including maintaining integrations with on prem, cloud, and code vulnerability management platforms, • Participate in additional projects and tasks, at the direction of Security Leadership, • Bachelor's degree in Cybersecurity, Information Technology, Computer Science, or equivalent experience, • Minimum 8 years of experience in vulnerability management, patch management, or security operations, • At least one security certification such as Security+, CISSP, CEH, GSEC, or equivalent, • Strong understanding of operating systems (Windows, Linux), networking, and enterprise infrastructure, • Experience with vulnerability scanning tools (e.g., Tenable, Qualys, Rapid7, CrowdStrike Exposure Management), • Familiarity with patch management tools and platforms (e.g., SCCM, Intune, WSUS, JAMF, Ansible), • Knowledge of CVE, CVSS, NIST, CIS benchmarks, and common threat vectors, • Ability to clearly communicate technical risk to non-technical stakeholders, by assessing and focusing on business impact Experience supporting compliance frameworks (ISO 27001, SOC 2, PCI DSS,), • Experience with cloud platforms and cloud-native vulnerability tools, as well as code platforms, • Familiarity with AI Tools and AI First mindset At Optimum, we're fueled by our four core pillars: Taking Ownership, Upholding Transparency, Creating Community, and Demonstrating Expertise. Our commitment to empowering employees to take responsibility and embrace proactive problem-solving underpins Taking Ownership. Upholding Transparency is at the core of our culture, with open and honest communication fostering trust among our dedicated team and loyal customers. Creating Community is more than a goal; it's our daily commitment to fostering an environment of collaboration, innovation, and positivity. Demonstrating expertise is a promise we uphold through continuous learning and engagement with our customers to consistently deliver top-quality products and services. These pillars not only shape our culture but define Optimum as a place of excellence, trustworthiness, and thriving community, and we invite you to be a part of our journey. If you have the drive to succeed and are ready to embark on a thrilling career, seize this opportunity today, and join our winning team, so together, we'll shape the future of connectivity. All job descriptions and required skills, qualifications and responsibilities for a particular position are subject to modification by the Company from time to time, in the Company's discretion based on business necessity. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, national origin, religion, age, disability, sex, sexual orientation, gender identity or protected veteran status, or any other basis protected by applicable federal, state, or local law. The Company provides reasonable accommodations upon request in accordance with applicable requirements. Optimum collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state, and local law. Applicants for employment with the Company will never be asked to provide money (even if reimbursable) as part of the job application or hiring process. Please review our ___ for further details. Pay is competitive and based on a number of job-related factors, including skills and experience. The starting pay rate/range at time of hire for this position in New York is $133,661.00 - $219,586.00 / year. For other locations, please inquire with your recruiter. The rates/ranges provided herein are the anticipated pay at the time of hire, and do not reflect future job opportunity.

Job Location(s) US-NY-Old Westbury Job ID 2025-4061 Division School of Health Professions Position Type Adjunct Type Regular Part-Time Category School of Health Professions New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The Department of Nursing seeks Clinical Adjuncts to teach Junior and Senior students. Adjuncts with specialties in Maternal Child, Pediatric, Fundamentals, and Community Health are needed for the Fall 2025 semester. Masters Degree in Nursing. Experience in the specialty you would like to teach in. Ability to work in the clinical one weekday per week. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank. USD $99.00/Hr. USD $108.00/Hr.

The Territory Manager, Protection and Controls, is responsible for achieving overall sales goals and growing the installed base of Hubbell's technology products and services designed to secure, operate, and optimize the electrical distribution grid within the assigned territory.Utilizing both direct and indirect sales approaches, the Sales Director is responsible for leading the customer engagement within the assigned territory and developing winning strategies to assess customer needs, develop market leading solutions, gather/communicate market intelligence, and win business with current and new customers. Candidate must reside in one of the following states (WI, IL, IN, MO, KY, ND, SD, NE, KS, MN, IA). #LI-AO1 Marketing: • Understand regional, state, and national dynamics within their region to promote Hubbell as a market leader in electrical grid automation, • Develop and maintain a network of contacts within utility management, project teams, channel partners, and industry stakeholders, • Identify and develop opportunities to grow business with new and existing customers, • Advocates to customer's stakeholders to drive and acquire funding mechanisms to expand market opportunities, • Assess competitor offerings and develop differentiated market approaches, • Develops and leads implementation of long-term account-based marketing campaigns, • Consolidate and convey marketing intelligence related to emerging customer needs and competitor products, • Contribute to product development ideas and specifications, • Works closely with Product Management, Business Development, Technical Support and sales team to gather product Voice of the Customer, • Lead the commercialization process for new offerings in the market, • Conduct market research and special projects as required, • Ensures proper flow of market intelligence with particular emphasis on trends and technical differences Sales Activities: • Achieves current year sales targets and year-on-year growth plans by analyzing territory and customers to develop specific region plan, • Implement specific sales programs to promote Hubbell products and services, • Conducts product presentations and demonstrations that promote Hubbell's capabilities, • Ensures full sales support and customer knowledge for protection, controls, and quality systems within assigned territory., • Overcomes technical and business objections of prospective and current customers by providing technical solutions based on utility protection, controls and quality system expertise, • Works collaboratively with Commercial Operations to prepare proposals and obtains internal approvals, • Assist when necessary, in establishing customer credit and collection of receivables, • Keeps customer information, opportunity pipeline, and forecasts current in relevant internal CRM systems, • Controls sales expenses to meet budgets and maintains a proper ratio for their assigned territory Sales Channel Management: • Collaborates with Sales Channel Leadership to evaluate, establish and maintain a network of independent sales agents/distributors, • Assigns, directs, and supports the efforts of agents/distributors, • Supervises agents/distributors within assigned territory, • Keep Sales, Customer Technical Service teams, and other Hubbell personnel informed of agent/distributor assignments, • Ensures implementation of current Hubbell policies and procedures for sales agents/distributors, • Applies systematic reviews to evaluate all agents/distributors under their jurisdiction for compliance with established procedures and identify training needs, • Keeps agent/distributor contracts on a current basis in conjunction with Sales Channel Leadership, • Integrates Hubbell strategies through their assigned agents/distributors to achieve objectives and goals, • Accepts the lead role in coordinating project and quotation activities between agencies (and Regions) to maximize sales opportunities, • Develops bookings and/or sales quota assignments for their agents/distributors To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Educational and Experience Requirements: • BS in Engineering(Electrical Engineering preferred) or equivalent two year degree with 15+ years industry experience in utility protection and controls in a technical role, • 5 - 10 years of experience in power generation, transmission and distribution systems along with associated communications and software systems. Specific experience in distribution automation, protection, controls and power quality systems at an electric utility organization is strongly preferred., • 3 - 5 years of experience in sales, commercial, or product management roles., • Experience working and supervising independent sales agent/distributors preferred. Skills and Knowledge: • Knowledge of Hubbell and competitor products and services and their applications in the generation, transmission, and distribution of electric power, and power quality measurement., • Knowledge of utility back- office integrations for distribution automation & AMI applications., • Knowledge of the application of domestic and international electrical standards, such as UL, IEC, ANSI, IEEE and CE, and local laboratory certificate requirements., • Ability to write and publish technical papers., • Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents., • Ability to respond to common inquiries or complaints from customers (at all levels), regulatory agencies, or members of the business community with tact and diplomacy., • Ability to write speeches and articles for publication that conform to prescribed style and format., • Ability to travel up to 50% via air or land. Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Job Location(s) US-NY-Old Westbury Job ID 2026-4436 Division Student Administration & Operations Position Type Staff Type Regular Full-Time Category College of Osteopathic Medicine New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. NYTech's College of Osteopathic Medicine seeks an Administrative Specialist located at the Long Island (Old Westbury, NY campus). Assist Associate Dean with the completion of varied operational tasks, reports, correspondence/communications, surveys, document organization and on-line storage. Assist Associate Dean in the overall management/implementation/scheduling of division meetings, supplies, budgets. • Assists the Associate Dean in the organization of student conduct cases, maintain the Maxient database for conduct cases. Arrange meetings and hearings. Ensure all records are kept correctly., • Act as point person for all student required documents including criminal background checks, COVID-19 vaccinations, student professionalism statements., • Monitor student status and serve as main point of contact for directed studies, leave of absences, withdrawals, requests for reinstatement., • In relation to departmental projects, initiatives, and events: proactively compose varied email correspondence/communications to students/faculty/staff and external parties, and complete required follow-up as needed., • Ordering/organizing/monitoring department supplies, completing required paperwork for PO's/requisitions for vendor purchases, proof reading documents, processing internal and external catering orders, maintain/organize departmental documents/files in both the physical office space as well as on departmental on-line share drives., • Scheduling of virtual and in-person meetings/appointments (i.e. calendaring) for Associate Dean., • Other duties/projects as assigned by Associate Dean., • A Bachelor's degree is required., • Exceptional Computer Skills/Knowledge - Fully Proficiency in Microsoft Office and in using Google Drive. Experience in Canva and Survey Monkey a plus, • Ability to learn internal computer based platforms and new external software/platforms quickly and efficiently., • Possesses excellent communication skills, both verbal and in writing., • Ability to effectively complete public speaking presentations (to faculty/staff/students) as needed., • Detailed oriented with a high degree of accuracy, • Follows comprehensive direction with ease., • Proactive problem solver., • Successfully works independently and collaboratively. New York Institute of Technology offers numerous opportunities to enhance personal and professional growth and provides employees with a competitive compensation and benefits program inclusive of generous paid time off, holidays, tuition remission, and retirement plans with employer contributions. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $45,000.00/Yr. USD $50,000.00/Yr.

Job ID: 570904705 Location: 1111 Stewart Avenue, Bethpage, NY 11714 Lightpath is one of the largest competitive local exchange carriers in the tri-state area. Weown and operate our infrastructure "from the ground up" by deploying over 20,000 route miles connecting 13,500 on-net/LIT buildings. With a strong portfolio of cutting edge solutions for Internet, WAN, Voice, SD-WAN, Security & Cloud services, we enable Enterprise customers of all sizes the ability to react to new challenges while developing best practices for the future. With Lightpath's continued focus on network excellence and a "customer first" service commitment, we are building a workforce of the best talent that will meet the needs of our customers and reflect the diverse communities we serve. Job Summary The Enterprise Sales Account Executive is responsible for developing advanced relationships with Lightpath named target companies and existing assigned Customer accounts. The Enterprise Sales Account Executive will generate new customer relationships working with accounts and prospects. These accounts are defined by the sales team in each region and approved by Senior Management. This position requires little direct supervision and has the discretion to engage in negotiations and solution development in support of the needs of our largest most complex accounts. The Enterprise Sales Account Executive will be responsible for increasing the net revenue and share of business in those assigned accounts according to a Yield Plan. Top Objectives • Complete all required training and certification within the first 30 days of employment., • Demonstrate continued knowledge of Lightpath products, services, funnel management methodology, processes, policies, and strategy., • Using prescribed methodology, develop strong relationships with decision makers in target prospect and customer accounts, leading to the sale of OLP products and services to solve identified business problems., • Using prescribed methodology, develop and effectively manage a funnel of active opportunities suffice to meet future quota objectives as defined., • Working with the Director of Sales, develop a strategic account plan for all assigned prospects and customer accounts., • Execute the plan using an understanding of our prescribed methodology and prior sales experience to develop relationships and navigate a complex customer hierarchy to reach the highest decision-making level possible., • Secure appointments with mid-level and "C" level execs and conduct a well-defined, consultative sales process consistent with our approved sales approach., • Effectively engage Sales Support, Operations, Contracts Management, Engineering and other relevant technical personnel from Lightpath Business operational groups to bring the appropriate knowledge and skill set to the customer in order to develop appropriate solutions that fits the customer needs., • Effectively manage all complex RFI / RFP processes initiated by assigned customers to ensure that Lightpath Business has the best possible response., • Attend and successfully complete all required sales, product and process training sessions, and take personal responsibility for professional development in order to increase your skills as a Salesperson., • Develop, package, and present comprehensive custom-tailored solutions in concert with Operational and Engineering Teams to the customer in a complete and professional manner., • Effectively manage all aspects of solution, pricing, and contractual negotiations to ensure the customer needs are balanced with favorable terms for Lightpath., • Be pro-active and keep up with our ever-changing industry with regards to new product offerings, industry changes, emerging technology and competitor actions., • Attend all meetings as directed by your supervisor and management., • Submit weekly sales forecasts, expense reports, call reports, as well as other reports on time and when required by Sales Management., • Consistently and completely utilize and exploit our Sales Force Automation system, (Salesforce.com) and database tools, and enter all activity related to all sales activity into the system daily. This includes a synopsis of all conversations with Lightpath Business Customers and Prospects., • Work with Project Management, Operations, and Engineering to insure the highest levels of customer satisfaction., • Consistently maintain a positive attitude contributing to an overall positive atmosphere at Optimum Lightpath., • Work in and contribute to an atmosphere of trust and integrity with fellow employees to ensure the overall success of Lightpath Business., • Work within all company guidelines to ensure compliance to all industry-wide regulations and proactively seek the advice and assistance of your supervisor whenever needed., • Candidates must be high energy individuals who are willing to be an integral part of a growing professional sales organization., • Tenacity - Ability to never stop working on a challenge., • Courage - Unwilling to give up in the face of adversity., • Intelligence - to fully understand the customer supplier dynamic., • Focus - Understands how to manage time effectively and where to focus efforts., • Realism - Knows when to walk away from a deal, and when to keep going., • Responsibility - Willingness to be held accountable., • Professional Bearing - Ability to generate a positive first impression., • Integrity & ethics - ability to do the right thing., • Excellent verbal and written communications skills., • Ability to work well under pressure., • Strong Computer Skills are required for eth development of complex customized proposals and RFI/P responses etc., • Engineering and technical background in telecommunications or a related technical field to support and engage in solution development and complex negotiations., • 5+ years prior sales experience with large accounts required., • Demonstrated ability to develop, manage, and close sales opportunities on a consistent basis, following a prescribed methodology., • Highly organized, and data driven, with a demonstrated ability to accurately forecast sales results, and meet all sales goals., • Demonstrated ability to make professional presentations to customers and prospects and communicate complex technical issues in layman's terms., • Solid understanding of telecommunications and Information technology concepts and fundamentals., • Proven history of excellent customer service and ability to build solid customer relationships with a full understanding the dynamics and techniques of relationship management., • College degree or relevant experience., • Satisfactory driver's license & dependable transportation., • Ability to travel as needed., • This position is open to candidates who are able to work from either our Bethpage, NY or White Plains, NY office locations. Lightpath is an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. Lightpath collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. The anticipated pay for this position is $75,000 to $175,000 annually, which reflects a good-faith estimate of what we may offer at the time of the posting, inclusive of base salary and commission incentive pay. Commission is tied to individual and/or company performance. Base salary will be determined on various factors, including geographic location (such as New York City, Long Island or White Plains) as well as relevant experience. A comprehensive benefits package is offered as well, including medical, dental, vision, 401(k), paid time off, and more.

Are you looking to Optimize your life? Start your exciting path to a rewarding career today! We are Optimum, a leader in the fast-paced world of connectivity, and we're on the hunt for enthusiastic professionals to join our team! We understand that connectivity isn't just a luxury anymore - it's a necessity that empowers lives, fuels businesses, and drives innovation. A career at Optimum means you'll be enabling progress and enhancing lives by providing reliable, high-speed connectivity solutions that keep the world connected. We owe our success to our amazing product, commitment to our people and the connections we make in every community. If you are resourceful, collaborative, team-oriented and passionate about delivering consistent excellence, Optimum is the Company for you! We areOptimum! We are seeking a highly experienced and visionary Manager ofSoftware Engineering to lead and inspire our talented engineering team.The ideal candidate possesses a strong technical background in service-based architectures,outstanding leadership skills,and a passion for delivering innovative software solutions.In this role,you will drive the development and execution of our technology roadmap to create the best tools on the planet for our front-line sales and tech teams,collaborate with cross-functional teams,and ensure the delivery of high-quality products that meet the needs of our customers and business objectives. • Lead effective brainstorming sessions to generate innovative ideas and solutions, • Drive multi-scrum technology feasibility,delivery,and quality in partnership with product and design teams, • Establish and gain acceptance for technology roadmaps aligned with product roadmaps, • Establish and gain acceptance for technical solutions,serving as a go-to expert for specific capabilities, • Articulate technology vision,principles,and roadmaps to diverse audiences,tailoring communication appropriately, • Achieve objectively good negotiation results efficiently while maintaining relationships and driving decision-making, • Effectively and respectfully drive technical team interactions,persuasively influencing architecture,software design,implementation,and incident recovery, • Advise team members on the quality of software designs,code,tests,and documentation, • Proactively build strong relationships with product,design,and business/operations counterparts within and across teams, • Understand and articulate the financial benefits and costs of capabilities,incorporating this information into decision-making, • Thoroughly vet and refine requirements to clearly articulate their intent, • Establish clear cost and time commitments to stakeholders,ensuring they are met with assistance, • Consistently communicate with stakeholders about expectations and proactively share knowledge to elevate others, • Bachelor's Degree inComputer Science or a related field, • Minimum seven years of professional software development experience,including 3+ years in a leadership role, • Strong technical background in relevant technologies (e.g.,Go,Java,cloud platforms, CI/CD), • Proven ability to lead and inspire engineering teams,foster collaboration,and drive results, • Excellent verbal and written communication skills,with the ability to tailor communication to different audiences, • Strong analytical and problem-solving skills,with a focus on finding creative solutions to complex challenges, • Experience managing software development projects,including scoping,planning,and execution, • Experience working in an Agile development environment If you have the drive to succeed and are ready to embark on a thrilling career, seize this opportunity today, and join our winning team, so together, we'll shape the future of connectivity. All job descriptions and required skills, qualifications and responsibilities for a particular position are subject to modification by the Company from time to time, in the Company's discretion based on business necessity. We are an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. The Company collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. Applicants for employment with The Company will never be asked to provide money (even if reimbursable) as part of the job application or hiring process. Please review our Fraud FAQfor further details. Pay is competitive and based on a number of job-related factors, including skills and experience. The starting pay rate/range at time of hire for this position in New York is $133,661.00- $219,586.00 / year. The starting payrate/range at time of hire for this position in Texas is $111,384.00 - $182,988.00 /year. For other locations, please inquire with your recruiter. The rates/ranges provided herein are the anticipated pay at the time of hire, and do not reflect future job opportunity.

Job Location(s) US-NY-New York | US-NY-Old Westbury Job ID 2025-4118 Division College of Arts & Sciences Position Type Adjunct Type Regular Part-Time Category College of Arts and Sciences New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The Humanities Department at New York Institute of Technology anticipates openings for part-time Adjunct faculty to teach a Spring 2026 Emerging Tech and Societal Impact course. Experience teaching in related areas and well as relevant professional experience required. Minimum degree completion: MA or MS degree in the relevant field. Openings may exist on both the New York City and Long Island campuses. College-level teaching experience required. Experience with Zoom, Canvas, and other classroom or online technologies highly preferred. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank. USD $99.00/Hr. USD $108.00/Hr.

Job Location(s) US-NY-Old Westbury Job ID 2026-4452 Division School of Health Professions Position Type Faculty Type Regular Full-Time Category School of Health Professions New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. NYTech' s Department of Physician Assistant Studies invites applications for a full-time faculty member to join our dynamic and collaborative team. This tenure-track position encompasses teaching, scholarship, service, and administrative responsibilities. The ideal candidate will contribute to the department's mission of preparing competent, compassionate, and knowledgeable physician assistants while complying with ARC-PA accreditation standards. Key Responsibilities Teaching Teach courses in the didactic phase of the program, including developing and delivering lectures, leading small group sessions, and facilitating active learning activities. • Develop and update course syllabi, learning objectives, and assessment tools in alignment with program goals, ARC-PA standards, and current evidence-based medicine., • Monitor students' academic and clinical performance and implement remediation plans for those needing additional support., • Collaborate with the Program Director, faculty, and staff on collecting, analyzing, and reporting program data for continuous quality improvement and compliance with ARC-PA standards., • Participate in evaluations of institutional support, curriculum, resources, operational policies, and clinical site performance., • Identify program strengths and weaknesses and collaborate on actionable improvement plans. Scholarship • Engage in scholarly activity, including research, publications, or presentations relevant to medical education or clinical practice., • Actively contribute to departmental, college, and university events and committees., • Participate in the program's admissions process, including reviewing applications, interviewing candidates, and contributing to final admissions decisions. PA Candidates: • Master's degree in Physician Assistant Studies or a related field., • Current NCCPA certification and NYS licensure (or eligible) in the State of New York., • MD or DO from an accredited program, • Licensure in the State of New York (or eligible), • Active ABMS or AOA specialty board certification, • Previous teaching experience in a PA program or other health professions education., • Familiarity with ARC-PA accreditation processes and standards., • Experience in curriculum design, student remediation, and program evaluation (remediation experience a significant plus), • Serving as a clinical preceptor may be considered in place of previous teaching experience. New York Institute of Technology offers numerous opportunities to enhance personal and professional growth and provides employees with a competitive compensation and benefits program inclusive of generous paid time off, holidays, tuition remission, and retirement plans with employer contributions. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $120,000.00/Yr. USD $120,000.00/Yr.

The Territory Manager, Protection and Controls, is responsible for achieving overall sales goals and growing the installed base of Hubbell's technology products and services designed to secure, operate, and optimize the electrical distribution grid within the assigned territory.Utilizing both direct and indirect sales approaches, the Sales Director is responsible for leading the customer engagement within the assigned territory and developing winning strategies to assess customer needs, develop market leading solutions, gather/communicate market intelligence, and win business with current and new customers. Candidate must reside in one of the following states (NC, SC, GA, FL, MS, AL, TN). #LI-AO1 Marketing: • Understand regional, state, and national dynamics within their region to promote Hubbell as a market leader in electrical grid automation, • Develop and maintain a network of contacts within utility management, project teams, channel partners, and industry stakeholders, • Identify and develop opportunities to grow business with new and existing customers, • Advocates to customer's stakeholders to drive and acquire funding mechanisms to expand market opportunities, • Assess competitor offerings and develop differentiated market approaches, • Develops and leads implementation of long-term account-based marketing campaigns, • Consolidate and convey marketing intelligence related to emerging customer needs and competitor products, • Contribute to product development ideas and specifications, • Works closely with Product Management, Business Development, Technical Support and sales team to gather product Voice of the Customer, • Lead the commercialization process for new offerings in the market, • Conduct market research and special projects as required, • Ensures proper flow of market intelligence with particular emphasis on trends and technical differences Sales Activities: • Achieves current year sales targets and year-on-year growth plans by analyzing territory and customers to develop specific region plan, • Implement specific sales programs to promote Hubbell products and services, • Conducts product presentations and demonstrations that promote Hubbell's capabilities, • Ensures full sales support and customer knowledge for protection, controls, and quality systems within assigned territory., • Overcomes technical and business objections of prospective and current customers by providing technical solutions based on utility protection, controls and quality system expertise, • Works collaboratively with Commercial Operations to prepare proposals and obtains internal approvals, • Assist when necessary, in establishing customer credit and collection of receivables, • Keeps customer information, opportunity pipeline, and forecasts current in relevant internal CRM systems, • Collaborates with Sales Channel Leadership to evaluate, establish and maintain a network of independent sales agents/distributors, • Assigns, directs, and supports the efforts of agents/distributors, • Supervises agents/distributors within assigned territory, • Keep Sales, Customer Technical Service teams, and other Hubbell personnel informed of agent/distributor assignments, • Ensures implementation of current Hubbell policies and procedures for sales agents/distributors, • Applies systematic reviews to evaluate all agents/distributors under their jurisdiction for compliance with established procedures and identify training needs, • Keeps agent/distributor contracts on a current basis in conjunction with Sales Channel Leadership, • Integrates Hubbell strategies through their assigned agents/distributors to achieve objectives and goals, • Accepts the lead role in coordinating project and quotation activities between agencies (and Regions) to maximize sales opportunities, • Develops bookings and/or sales quota assignments for their agents/distributors To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Educational and Experience Requirements: • BS in Engineering(Electrical Engineering preferred) or equivalent two year degree with 15+ years industry experience in utility protection and controls in a technical role, • 5 - 10 years of experience in power generation, transmission and distribution systems along with associated communications and software systems. Specific experience in distribution automation, protection, controls and power quality systems at an electric utility organization is strongly preferred., • 3 - 5 years of experience in sales, commercial, or product management roles., • Experience working and supervising independent sales agent/distributors preferred. Skills and Knowledge: • Knowledge of Hubbell and competitor products and services and their applications in the generation, transmission, and distribution of electric power, and power quality measurement., • Knowledge of utility back- office integrations for distribution automation & AMI applications., • Knowledge of the application of domestic and international electrical standards, such as UL, IEC, ANSI, IEEE and CE, and local laboratory certificate requirements., • Ability to write and publish technical papers., • Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents., • Ability to respond to common inquiries or complaints from customers (at all levels), regulatory agencies, or members of the business community with tact and diplomacy., • Ability to write speeches and articles for publication that conform to prescribed style and format., • Ability to travel up to 50% via air or land. Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Job Location(s) US-NY-Old Westbury Job ID 2025-4057 Division School of Health Professions Position Type Adjunct Type Regular Part-Time Category School of Health Professions New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The Department of Interdisciplinary Health Sciences seeks part-time Adjunct faculty to fill possible openings in the following areas in our Health Sciences Programs: Community Health, Health Information Management, Epidemiology, Healthcare Payment Systems, and Exercise Science. Required Degree: Master's Degree Preferred Degree: Doctorate Required Field of Expertise: Must have expert knowledge in a health and/or exercise science. Preferred Experience: Candidates with higher education teaching experience, knowledge of asynchronous and synchronous online platforms and experience in using the Canvas Learning Management System are strongly preferred. Rank and Salary commensurate with education and experience. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank. USD $99.00/Hr. USD $108.00/Hr.

Are you looking to Optimize your life? Start your exciting path to a rewarding career today! We are Optimum, a leader in the fast-paced world of connectivity, and we're on the hunt for enthusiastic professionals to join our team! We understand that connectivity isn't just a luxury anymore - it's a necessity that empowers lives, fuels businesses, and drives innovation. A career at Optimum means you'll be enabling progress and enhancing lives by providing reliable, high-speed connectivity solutions that keep the world connected. We owe our success to our amazing product, commitment to our people and the connections we make in every community. If you are resourceful, collaborative, team-oriented and passionate about delivering consistent excellence, Optimum is the Company for you! We areOptimum! We are seeking a skilled and accomplished Vice President of Activation Platforms which is a transformational technology leader, responsible for driving the vision, strategy, and execution of next-generation platforms for network operations, service assurance, provisioning, inventory, and performance management supporting the Optimum services. These mission-critical platforms underpin network operations, customer experience, and revenue management, forming the backbone of our digital ecosystem. This executive will play a pivotal role in shaping the future of our technology landscape, leading large-scale transformation programs to modernize and simplify service and billing platforms capabilities. The VP will champion automation, cloud adoption, and data-driven intelligence to deliver seamless, scalable, and future-ready platforms that elevate both operational efficiency and customer experience. Partnering closely with product, engineering, network operations, and business leaders, the VP will influence enterprise-wide decisions, forge strategic vendor alliances, and build high-performing global teams to deliver measurable business impact. This role demands visionary leadership, deep domain expertise, and a proven track record of steering complex, multi-year technology transformations in fast-paced, high-growth environments. • Define and execute the transformation strategy aligned with corporate objectives and technology roadmap., • Drive standardization, simplification, and automation across all domains to improve agility, reduce costs, and accelerate time-to-market., • Ensure compliance with telecom regulations, taxation, data privacy, and financial controls., • Support audits related to service activation accuracy, revenue recognition, and regulatory reporting., • Own disaster recovery, business continuity, and incident response for activation platforms., • Build strong partnerships with business stakeholders, ensuring platforms meet evolving customer, operational, and financial needs., • Lead large-scale modernization programs, including architecture redesign, platform consolidation, and integration with cloud-native and AI-driven solutions., • Oversee vendor selection, contract negotiation, and management of strategic technology partnerships., • Ensure successful execution of multi-year transformation initiatives, balancing innovation with operational stability., • Transforms ideas into elegant and simple architectures and software designs that are validated within budget and technology constraints., • Anticipates the delta in effort between options with functional partners., • Coaches' others on best practices for architecture, software design, coding, and documentation., • Ensures regulatory and corporate policy compliance, consistently employing privacy / security by design., • Advocates for the importance of continuous, rapid testing and learning., • Drive high system availability, scalability, and resilience across all platforms., • Partner with Network Operations, IT, and Service Management to improve order-to-activation, service assurance, billing accuracy, and customer experience., • Establish OKRs and governance models to track performance, quality, and cost efficiency., • Establish KPIs for service performance, MTTR, SLA adherence, and customer impact., • Build and lead a high-performing global organization encompassing architecture, engineering, program management, and operations., • Foster a culture of collaboration, accountability, continuous improvement, and innovation., • Develop future technology leaders and ensure strong succession planning., • Bachelor's degree in computer science, Engineering, or related field (Master's degree preferred)., • 15+ years of experience in telecommunications or large-scale technology organizations, with at least 8 years in senior leadership roles focused on service and billing platforms., • Proven track record of delivering major transformation programs (order management, inventory, provisioning, service assurance, billing, CRM, etc.)., • Deep understanding of telecom network and service lifecycle management, including integration with ITSM, AIOps, and customer experience platforms., • Strong experience with cloud migration, API-driven architecture, and emerging technologies (AI/ML, orchestration, DevSecOps)., • Exceptional stakeholder management skills, capable of influencing C-suite, business partners, and external vendors., • Financial acumen to understand and articulate the company's profits and losses, contributing as a leader in ROI and budget analysis., • Demonstrated data literacy in support of engineering delivery and operations decisions., • Deep architecture design experience, consulting teammates on specific difficult areas of the design and setting up new projects for architectural success., • Demonstrated understanding of technical debt as a long-term budgeting and risk management tool, articulating when to incur more and when to pay it down., • Expertise with popular frontend and services programming languages across a range of device types, databases, devops automation, and workflow tools., • Demonstrated commitment to ongoing learning and professional development in the field of product development., • Exceptional customer communication, leadership, and interpersonal skills. Ability to make informed decisions under pressure and effectively manage engineering deliveries in support of an exceptional customer experience., • Ability to articulate complex technical capabilities to technical and non-technical audiences in a manner that allows them to understand how they work and why they were selected., • Proven ability to implement Agile at scale. If you have the drive to succeed and are ready to embark on a thrilling career, seize this opportunity today, and join our winning team, so together, we'll shape the future of connectivity. All job descriptions and required skills, qualifications and responsibilities for a particular position are subject to modification by the Company from time to time, in the Company's discretion based on business necessity. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, national origin, religion, age, disability, sex, sexual orientation, gender identity or protected veteran status, or any other basis protected by applicable federal, state, or local law. The Company provides reasonable accommodations upon request in accordance with applicable requirements. Optimum collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state, and local law. Applicants for employment with the Company will never be asked to provide money (even if reimbursable) as part of the job application or hiring process. Please review our ___ for further details. Pay is competitive and based on a number of job-related factors, including skills and experience. The starting pay rate/range at time of hire for this position in the posted location is$178,500.00-$255,000.00 / year. The rate/range provided herein is the anticipated pay at the time of hire, and does not reflect future job opportunity.

Job Description Mastech Digital provides digital and mainstream technology staff as well as Digital Transformation Services for all American Corporations. We are currently seeking an Inspector for our client in the Electronic Instruments and Electromechanical Manufacturing domain. We value our professionals, providing comprehensive benefits and the opportunity for growth. This is a Contract position, and the client is looking for someone to start immediately. Duration: 6+ Months Contract Location: Garden City, NY Salary: $26.00-$31.00/Hourly Role: Inspector Primary Skills: Engineering Role Description: The Inspector must have 5+ years of experience. In this role, you will be responsible for first piece inspection, in-process and final products using open set-up, CMM and inspection methods and techniques in accordance with drawing requirements and specifications. Must have good communication skills, able to read and follow client work instructions and quality procedures. Duties and Responsibilities: • Read and interpret aerospace engineering drawings using geometric dimensioning and tolerances including and understanding of maximum material conditions., • Inspect detail parts and assemblies per drawing requirement and specs using standard measuring equipment., • Prepare and maintain inspection reports., • Program and/or operate Coordinate Measuring Machine., • Perform Hardness testing., • Collect and tabulate data for SPC use., • Review Supplier F.A.I.R./Generate First Article Reports per AS9102., • Other duties as directed by the management. Required Skills and Abilities: • Basic computer knowledge including MS Excel and Word., • Interpret drawing requirements/specs and geometric dimensions and tolerances., • Familiar with MIL, NAS, MS, AMS, AWS and AS specifications and standards., • PCDMIS programming skills., • Familiar with special process specifications for heat treatment, welding, and non-destructive testing. Education and Experience: • High school graduate., • 3-5 Years of mechanical inspection, aerospace experience., • Post high school education in math, engineering, inspection techniques or related fields a plus. Equipment Used: • Vernier calipers., • Micrometers., • Height Gauges., • CMM machines., • Other standard measuring tools/instruments. Education: High School graduate/Bachelor’s degree Experience: Minimum 5+ years of experience Relocation: This position will not cover relocation expenses Travel: No Local Preferred: Yes Note: Must be able to work on a W2 basis (No C2C) Recruiter Name: Veena Grover Recruiter Phone: 412-525-7995 Benefits: We have various coverages and additional benefits to choose from: • Medical, Dental (Including Ortho) & Vision Insurance (Option to Enroll)., • Paid Leaves (Wherever applicable)., • Life & Disability Coverage (Upon eligibility)., • 401K Option, Education Assistance Program and more. Mastech Digital is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Position Summary: TTM is an advanced-technology leader in highly sophisticated surveillance, communications, analysis and integration solutions. Our systems are deployed across a wide range of land, sea and air applications, providing our aerospace, defense and commercial customers with a distinct tactical advantage. In this role, the PCB Staff Design Engineer will design moderate to complex printed circuit board (PCB) layouts in the domain of Digital, Analog, Power & RF interconnect applications. This includes responsibility for circuit board layout conceptualization, (CAD application by means of Siemens Xpedition, PAD's or Cadence Allegro tool sets), detail design activities and value-engineering in support of internal TTM programs. Areas of emphasis/focus include physical design (CAD implementation)/documentation utilizing best practice of electrical IPC standards/methodologies with experienced approach to manufacturing and sustaining maintenance of legacy design projects. Complementary support provided by a combination of TTM Management, Field Application Engineering, Electrical/Mechanical Engineering and NPI Manufacturing teams. Duties and Responsibilities: Design Engineering Physical Design • PCB concept sketches for assistance in design layout estimating, • PCB design suggestions/trade-offs regarding initial engineering inputs, • Support changes to existing schematic diagrams using TTM suite of tools: OrCAD and/or DxDesigner \n • Place and route components ensuring that all electrical and physical specifications meet the detailed design requirements for each PCB design. Utilization of Siemens Xpedition/PAD's and/or Cadence Allegro required\n, • Participate in design reviews, interface with electrical, mechanical, manufacturing and process engineers to design proto-type and production printed circuit boards in accordance with TTM standards and quality procedures\n, • Collaborate on assigned projects closely with Si (Signal Integrity) or various engineering disciplines, fellow designers and Program \n\n Leadership \n • Provide layout feedback to design engineers as needed to ensure functionality and manufacturability of PCB designs\n, • Create fabrication and assembly drawings (AutoCAD 2023), parts list & incorporate changes to existing design documentation. Create and maintain component libraries\n\n\n, • Generate all output files (ODB++, Bill of Materials & PCB/CCA documentation) required for the manufacture of the board and assembly\n, • Maintain change (PCN) responsibilities on re-design and documentation updates\n\n Industry and TTM-specific electrical standards and methodologies- \n • Product safety and EMI consideration during eCAD layout (UL, CSA, NEBS, Etc.)\n, • Standardization of electrical components and eCAD libraries utilizing IPC or vendor specific standards\n, • Exceedingly experienced with High-Speed PCB Design Constraints: Differential Pairs, Routing Topologies, Controlled Impedance, Length-matched Traces and Delay Tuning\n, • Demonstrated experience with RF PCB routing complexities. Implement layout rules for RF transmission lines (Micro-strip & Coplanar Waveguide), signal line isolation practices, via fencing & unique RF routing structures\n, • Audio (Analog & Digital separation) PCB best practice layout guidelines highly recommended\n, • Direct design experience related to multi-layer CCA and Flex PCB technologies \n, • Current knowledge of µ-via/HDI layout methodologies and best practices\n, • Understanding of stack-up materials/construction along with impedance modeling requirements\n\n Education and Experience: Education: Minimum Associates in Electrical Design/Drafting or BS in Electronic Technology. Related eCAD training certification/career experience will be considered in lieu of a degreed program with 10 year experience. Experience: Minimum of 10 years' experience with primary hands-on demonstrated proficiency of Siemens PAD's (VX2.8 or later), Siemen's Xpedition (VX2.14 or later) and/or Cadence Allegro/OrCAD (17.4 or later) product experience is required. Comprehensive understanding of electrical and mechanical engineering design practices related to printed circuit board electrical drafting and fabrication drawing creation experience is essential. Necessary familiarities with electrical design utilizing IPC standards, IAW IPC-2221/3 and associated specs is critical. Knowledge and methodology utilizing standard IPC Class III approach to design and manufacturing concerns is also necessary. BS or related degree in engineering or a related discipline \n • Related PCB design for the Aerospace and Defense sectors is preferred.\n, • CID/CID++ Certification for PCB Designers highly recognized as professional validation of design, documentation, and manufacturability skills within the industry.\n, • Solid oral communication and interfacing skills with technical and manufacturing personnel to resolve engineering tasks. Propose alternatives when faced with challenging PCB design situations including resolutions to non-standard problems.\n\n, • Appropriate understanding of vendor component data sheets for creation of schematic library and/or PCB footprints expected.\n #LI-VT1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $101,807 - $179,040 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job Description Cyber Security Engineer WHO WE’RE LOOKING FOR We build our culture one hire at a time. Our tireless pursuit of providing our partners with world-class management solutions starts with talking to you. Our goal is simple. We want to build great teams that can help our partners focus on delivering exceptional eye care: the kind of teams people want to be a part of, and the kind of teams our patients can’t live without. We want to learn more about you and the kind of team culture you can help us create. We’re interested in your relevant skills and what you can do. We’re even more interested in your positive attitude and flexible mindset. THE OPPORTUNITY AT HAND The Senior Security Engineer will work within Spectrum Vision’s Information Technology organization to ensure the ongoing protection of the applications, systems, network, physical assets, and data of the company and that they are operated under continued alignment with Information Risk and Security policies, standards, and compliance requirements. This will be achieved by ensuring the security tools and processes designed to protect the company’s data, systems, and network are working effectively together. This role is a technical engineering and operations position requiring superior technical design and process-building skills with the ability to advocate and influence positive transformation within the broader IT organization. OUR EXPECTATIONS OF YOU • Must be able to identify and spotlight vulnerabilities on on-premises and remote networks (including cloud operating environments), correct problems, and prevent security breaches, • Develop systems and processes for information risk and security leading practices throughout the company, • requirements and select security technology through RFP / RFI processes, • technical security standards aligned to Information Security policy and client requirements, • Key Risk Indicators and Key Performance Indicators for Security Operations services; monitors for effectiveness and develops performance improvements when necessary., • and Maintain Security Incident Response capabilities and plans and Business Continuity plans, • systems for potential vulnerabilities, • of penetration testing, network security, and the techniques used to expose and correct security flaws, • for proper management of patches to defray business impact while keeping security protocols up-to-date, • computer networks and systems for threats and security breaches, • security incident response and prepare reports on security incidents, • maintains, and implements vendor security assessment plans and conducts vendor security reviews to ensure COMPANY security policies, standards, and external compliance requirements are being met, • draft and development of vendor security related policies, standards, guidelines, procedures, and requirements, • with other security organization members on cross-business / cross-functional opportunities WHAT YOU'LL NEED TO SUCCEED • Bachelor’s degree in related field, • Must have a broad understanding of security technologies including but not limited to firewalls, vulnerability and compliance management solutions, logging and security incident and event management (SIEM) , secure access service edge (SASE) endpoint security, and cloud posture management, and cloud security, • think creatively and innovatively about the information risk and security solutions that can keep data safe while still allowing a business to successful, • have experience in working with regulations and compliance requirements including HIPAA, HITRUST, NIST CSF, ISO 2700x, SSAE-16 (SOC 1, SOC2, SOC3), EU Data Privacy and Security, Privacy Shield, and others, • have experience in developing, executing, and maintaining Security audit plans, audit standards, and vendor security reviews, • have experience in identifying cultural and educational requirements for a diverse population and effectively able communicate audit and technical concepts to them, • are an excellent written and verbal communicator, • proficient with Microsoft Office Suite (Word, Excel, Power Point), • highly collaborative with the ability to properly handle confidential information, • work well independently and in a team environment, and work well in a matrix environment, • able to multi-task, prioritize and meet deadlines, • handle stress well and are comfortable in a high volume environment, • Information Systems Auditor (CISA), • Information Systems Security Professional (CISSP), • in Risk and Information Systems Controls (CRISC), • Information Security Manager (CISM) WHO WE ARE We’re a leading management services organization proudly serving ophthalmology practices and ambulatory surgery centers throughout the Mid-Atlantic and New England regions. We work tirelessly to provide our partners with access to world-class management solutions—including human resources, marketing and patient retention services, finance and accounting services, payroll management, and information technology—so our partners can focus on delivering exceptional eye care. Our leadership team is composed of some of the most experienced individuals in the eye care business. Our senior management team has a combined 200 years of eye industry experience collaborating with some of the most recognized practices in the nation. With nearly 1,400 employees, we support over 50 clinic locations, five state-licensed ambulatory surgery centers, and over 110 surgeons, doctors and other medical professionals. Our brands include OCLI Vision, Ophthalmic Consultants of Connecticut, Island Eye Surgicenter, New Vision Cataract Center and others. At Spectrum Vision Partners we know that cultivating diversity and fostering an inclusive work environment is critical to our impact and success. We create an environment where no individual is advantaged or disadvantaged because of their background. We offer equal opportunity employment regardless of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability status, age, marital status, or protected veteran status. With a commitment to maintaining a bias-free environment in which harassment is prohibited, we respect cultural diversity and comply with the laws of the places in which we operate. We expect our business partners, suppliers, clients, and all of our team members to uphold these commitments.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology products, including mission systems, radio frequency ("RF") components, RF microwave/microelectronic assemblies, and technologically advanced printed circuit boards ("PCB"s). TTM stands for time-to-market, representing how TTM's time-critical, one-stop design, engineering and manufacturing services enable customers to reduce the time required to develop new products and bring them to market. Additional information can be found at Principal Radar Systems Engineer The Principal Radar Systems Engineer performs complex analysis, modeling and simulation tasks as part of a team developing advanced radar solutions. Must have a background that would permit the U.S. Department of Defense to issue a Secret clearance when necessary for work on a project that requires such a clearance. Duties and Responsibilities: \n • Support requirements flow-down, HW/SW Trade Studies, System Level Design Reviews, Integration Planning & Execution and Flight Testing activities.\n, • Develop radar signal processing algorithms using MATLAB for radar mode designs applicable to maritime, overland and air-to-air modes;\n, • Develop high fidelity Radar performance simulations using MATLAB, taking into account real-world Radar characteristics including RF Chain parameters and quantized/fixed point signal processing. Work with various engineering disciplines to provide simulated test vectors and analyze test results.\n, • Develop system to component level performance budgets using theory and simulation. \n, • Knowledge of Waveform Design and Signal Processing methods to meet customer detection and geolocation requirements. Experience with Synthetic Aperture Radar is also desired;\n, • Experience with Active Electronically Scanned Array technology and design. ;\n, • Analysis of Flight Test Data with ability to debug system performance issues in stressing customer environments including performance assessments;\n, • Ability to form team consensus on design choices and execution plans;\n, • Thrives in a collaborative environment working with other high performing engineers to solve very challenging Radar problems\n, • Coordinates with other technical resources to formulate and carry out studies in system design to advance the capabilities and cost effectiveness of core radar products\n, • MBSE experience with Cameo or equivalent is a plus\n\n Education and Experience: \n • Master's degree in Engineering, PhD degree preferred\n, • Minimum of 10 years of related development experience\n\n #LI-VT1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $144,685 - $254,446 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

Job Description The Estimator generates proposals that meet customer's specifications and other requirements, and prepares the final budget for the project, product, or service. This is accomplished through collaboration with Engineers, the Sales Team, and other related departments. Essential Job Responsibilities not limited to: Estimating • Review blueprints and make decisions on product that meets project specifications, code requirements, and any special project criteria, • Use established pricing schedules to prepare and accurately generate proposals that comply with plans, specifications, and any special project criteria provided by the Sales Reps, • Use discretion with respect to product selection to achieve customer specifications and achieving the company’s profitability, • Accurately communicate to the customer the scope of the proposal and any special deviations as it relates to the plans and specifications through generation of a scope document, • Communicate effectively with the relevant departments to achieve objectives, which involves use of in-depth product knowledge and product application experience, • Escalate customer concerns effectively, • Accurately maintain the key project information and total scope of work in all sales proposal templates, sales estimating tools, and sales quote log, • Develop and accurately maintain all data in required sales trackers, • Support customer sales through service, education, and effective problem-solving Minimum Qualifications: • Bachelor’s Degree in Engineering is a plus, • 2 years commercial construction Experience, • 2 years project management experience with a contractor is preferred., • 1 year Estimating experience with an HVAC equipment dealer, • Strong team player with excellent people and communications skills, • Proven ability to read plan drawings and blueprints, • Excellent math skills, ability to apply concepts of basic geometry, • Strong attention to detail, resourceful, self-starter and a problem solver, • Demonstrated excellence in organization and time management skills, • Exceptional customer service skills, positive and upbeat attitude, • Strong team player with excellent people and communication skills, • Must be able to travel maximum of 5% if needed, • Sales Experience is a plus At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic. Company DescriptionFor over 10 decades, VMC Group has been recognized as a world leader in the design and manufacture of vibration isolation, seismic control and shock protection products. Our comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application. VMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity. We call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders. The VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.For over 10 decades, VMC Group has been recognized as a world leader in the design and manufacture of vibration isolation, seismic control and shock protection products.\r\n\r\nOur comprehensive product and engineering solutions cover a variety of industries – commercial construction, industrial/vehicular, OEM and military/aerospace. Our full range of spring, elastomeric architectural mounts, wire rope isolators, curbs and bases are proven to meet and exceed specifications for any seismic, non-seismic, shock, or even bomb blast application.\r\n\r\nVMC Group’s project managers and engineers are best known for working closely with our customers to exceed their expectations in the design, development and manufacturing of solutions for a specific application need. Whether the challenge is to solve a vibration isolation issue for a new piece of equipment or manage a seismic energy spec for a building structure, your VMC team works closely with your project group to engineer solutions to ensure years of superior resilience and isolation integrity.\r\n\r\nWe call this philosophical approach The Power of TogetherTM, and it defines the partnering relationship you can expect when you work with our firm. We are In It With You. That’s why our company and each of our brands have emerged as and continue to be world leaders.\r\n\r\nThe VMC Group is proud to be an Affirmative Action/Equal Opportunity Employer/Disability/Veteran. The VMC Group maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks.

1st Shift Hours: 7:00am - 3:30pm Company Paid Benefits including Medical, Dental, Vision and Paid Time Off Essential Duties and Responsibilities: The Assembler will be responsible for assembling components into heat exchanger cores according to work instructions, engineering drawings, and process documents. Components must be assembled in the proper order, in proper quantities, within the allotted time, and according to quality requirements. Education and/or Work Experience Requirements: • Must be able to read and interpret engineering drawings, work instructions, and other process documentation and procedures., • Ability to work independently and complete assignments within parameters of instructions given, prescribed routines, and standard accepted practices., • High School diploma or GED preferred., • Prior experience working in an AS9100 certified manufacturing environment preferred. Physical Requirements: • Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA, and other federal, state, and local standards, including meeting qualitative and/or quantitative productivity standards., • Ability to maintain regular, punctual attendance consistent with the ADA, FMLA, and other federal, state and local standards., • Must be able to lift and carry up to 50 pounds. Due to the nature of AMETEK Hughes-Treitler's programs and products, applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code. Compensation Employee Type: Hourly Salary Minimum: $35,000 Salary Maximum: $40,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Job Description Why Epicured? Epicured is on a mission to combat and prevent chronic disease, translating scientific research into high-quality food products and healthcare services nationwide. Our evidence-based approach brings together the best of the clinical, culinary, and technology worlds to help people eat better, feel better, and live better one meal at a time. By joining Epicured’s Technology team, you’ll help power the data infrastructure that supports Medicaid programs, clinical services, life sciences initiatives, and direct-to-consumer operations — enabling better decisions, better outcomes, and scalable growth. Role Overview Epicured is seeking a Data Engineer I to support data ingestion, reporting, and analytics across multiple business lines. Reporting to the SVP of Software Engineering, this role will focus on building and maintaining reliable reporting pipelines, supporting business requests, and managing data from a growing ecosystem of healthcare, operational, and e-commerce systems. This position is ideal for a self-starter with strong SQL skills who is comfortable working with evolving requirements, healthcare-adjacent data, and modern data platforms such as Microsoft Fabric and Power BI. Key Responsibilities * Build, maintain, and support reports across all Epicured business lines using Power BI, exports, and Microsoft Fabric. * Ingest and integrate new data sources, including SQL Server, operational systems, and external data exchanges. * Support reporting and analytics requests across Clinical & Life Sciences, Section 1115 Medicaid Waiver programs, Health Information Exchanges (e.g., Healthix), and Self-Pay e-commerce operations. * Handle HIPAA-sensitive data, ensuring proper governance, access control, and compliance standards are maintained. * Manage Shopify and other e-commerce data requests for Epicured’s Self-Pay division. * Keep reporting environments organized, documented, and operational while prioritizing incoming requests. * Operate and help scale Epicured’s Microsoft Fabric environment, contributing to platform strategy and best practices. * Partner with stakeholders to clarify ambiguous requirements and translate business questions into data solutions. Qualifications * 3+ years of experience in data engineering, analytics, or business intelligence roles. * Strong SQL skills with experience working in relational databases. * Experience with Azure, Microsoft Fabric, Power BI, or similar modern data platforms. * Strong proficiency in Excel / Google Sheets. * Ability to work independently and manage multiple priorities in a fast-growing environment. * Experience working with healthcare or HIPAA-adjacent data, including exposure to health information exchanges. * Familiarity with ETL / ELT pipelines and data modeling best practices. * Experience integrating operational, financial, logistics, and clinical datasets. Preferred Qualifications * Experience with C#. * Python experience is a plus. * Healthcare or life sciences background. * Experience supporting analytics for Medicaid, payer, or regulated environments. Compensation & Benefits * Salary Range: $115,000–$130,000 annually, commensurate with experience * Benefits include: * 401(k) * Health, Dental, and Vision insurance * Unlimited Paid Time Off (PTO) * Opportunity to grow with Epicured’s expanding data and technology organization Equal Employment Opportunity Epicured is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We do not discriminate on the basis of age, race, creed, color, national origin, religion, gender, sexual orientation, gender identity or expression, disability, veteran status, or any other protected status under federal, state, or local law.

Job DescriptionDescription: The Estimator generates proposals that meet customer's specifications and other requirements, and prepares the final budget for the project, product, or service. This is accomplished through collaboration with Engineers, the Sales Team, and other related departments. Essential Job Responsibilities not limited to: Estimating • Review blueprints and make decisions on product that meets project specifications, code requirements, and any special project criteria, • Use established pricing schedules to prepare and accurately generate proposals that comply with plans, specifications, and any special project criteria provided by the Sales Reps, • Use discretion with respect to product selection to achieve customer specifications and achieving the company’s profitability, • Accurately communicate to the customer the scope of the proposal and any special deviations as it relates to the plans and specifications through generation of a scope document, • Communicate effectively with the relevant departments to achieve objectives, which involves use of in-depth product knowledge and product application experience, • Escalate customer concerns effectively, • Accurately maintain the key project information and total scope of work in all sales proposal templates, sales estimating tools, and sales quote log, • Develop and accurately maintain all data in required sales trackers, • Support customer sales through service, education, and effective problem-solving, • Bachelor’s Degree in Engineering is a plus, • 2 years commercial construction Experience, • 2 years project management experience with a contractor is preferred., • 1 year Estimating experience with an HVAC equipment dealer, • Strong team player with excellent people and communications skills, • Proven ability to read plan drawings and blueprints, • Excellent math skills, ability to apply concepts of basic geometry, • Strong attention to detail, resourceful, self-starter and a problem solver, • Demonstrated excellence in organization and time management skills, • Exceptional customer service skills, positive and upbeat attitude, • Strong team player with excellent people and communication skills, • Must be able to travel maximum of 5% if needed, • Sales Experience is a plus At VMC Group we believe in supporting our employees both professionally and personally. When you join our team, you gain more than just a job — you gain access to a range of benefits designed to promote your well-being, growth, and financial security. • Health, dental and vision insurance, • 401K with company match, • Life Insurance, • Flexible Spending Accounts, • Generous annual time off policy, • 12 Company-Paid holidays, • A Solid Wellness Program to support your personal health goals We provide equal employment opportunities to all applicants regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic.

Job Description About the Role: The CNC Machine Operator plays a critical role in the manufacturing process by setting up, operating, and maintaining computer numerical control (CNC) machines to produce precision parts and components. This position requires a strong attention to detail to ensure that all products meet exact specifications and quality standards. The operator will interpret technical drawings and blueprints to program machines accurately and make necessary adjustments during production runs. Additionally, the role involves routine inspection of finished products and troubleshooting any mechanical issues to minimize downtime. Ultimately, the CNC Machine Operator contributes to efficient production workflows and supports the overall success of the manufacturing team. Shift hours 6:00am-2:30pm (for 6 months Wednesday to Sunday) * Minimum Qualifications: • High school diploma or equivalent., • Proven experience operating CNC machines in a manufacturing environment., • Basic understanding of CNC programming and machine setup., • Ability to read and interpret technical drawings and blueprints., • Certification in CNC operation or machining technology., • Experience with CAD/CAM software for programming CNC machines., • Knowledge of safety protocols and best practices in a manufacturing setting., • Strong mechanical aptitude and troubleshooting skills., • Set up CNC machines by loading tools, materials, and inputting programming instructions based on engineering drawings., • Operate CNC machinery to manufacture parts according to precise specifications and quality standards., • Monitor machine performance and make real-time adjustments to maintain product accuracy and efficiency., • Perform routine maintenance and cleaning of CNC equipment to ensure optimal operation and longevity., • Inspect finished products using measuring instruments to verify conformance to specifications and document results., • Collaborate with engineers and quality control teams to resolve production issues and improve processes. The CNC Machine Operator uses technical skills daily to interpret engineering drawings and translate them into precise machine instructions, ensuring parts are produced to exact specifications. Attention to detail is critical when monitoring machine operations and inspecting finished products to maintain high quality standards. Mechanical skills are applied when setting up machines, performing routine maintenance, and troubleshooting issues to minimize downtime. Communication skills facilitate effective collaboration with engineers, quality control personnel, and team members to optimize production processes. Additionally, familiarity with CNC programming and software enhances the operator's ability to adjust and improve machine performance efficiently. Benefits: • 401(k), • 401(k)match, • Medical insurance, • Paid time off, • Employee referral, • Voluntary Benefits, • STD/LTD Disability, • Life Insurance, • Pet Insurance, • Discount on vendor products Schivo Medical is a Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

1st Shift Hours: 7:00am - 3:30pm Company Paid Benefits including Medical, Dental, Vision and Paid Time Off Essential Duties and Responsibilities: The Assembler will be responsible for assembling components into heat exchanger cores according to work instructions, engineering drawings, and process documents. Components must be assembled in the proper order, in proper quantities, within the allotted time, and according to quality requirements. Education and/or Work Experience Requirements: • Must be able to read and interpret engineering drawings, work instructions, and other process documentation and procedures., • Ability to work independently and complete assignments within parameters of instructions given, prescribed routines, and standard accepted practices., • High School diploma or GED preferred., • Prior experience working in an AS9100 certified manufacturing environment preferred. Physical Requirements: • Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA, and other federal, state, and local standards, including meeting qualitative and/or quantitative productivity standards., • Ability to maintain regular, punctual attendance consistent with the ADA, FMLA, and other federal, state and local standards., • Must be able to lift and carry up to 50 pounds. Due to the nature of AMETEK Hughes-Treitler's programs and products, applicants must have the legal right to work in the US and additionally must be legally authorized to access export-controlled information and source code. Compensation Employee Type: Hourly Salary Minimum: $35,000 Salary Maximum: $40,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.5 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 22,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK is a component of the S&P 500. Visit for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) 263-8359. Nearest Major Market: Long Island Nearest Secondary Market: New York City

Job Location(s) US-NY-Old Westbury Job ID 2025-4076 Division College of Osteopathic Medicine Position Type Temporary Staff Type Temporary Part-Time Category College of Osteopathic Medicine New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. General description: Instructor is expected to provide instruction to students enrolled in the Master's degree program in HealthCare Simulation for the assigned course(s). • Instructor will report to the Chief of Virtual Medicine and/or the Master's degree Program Director at NYIT-College of Osteopathic Medicine. Specific Responsibilities: • Follow the course goals and objectives as specified in the Master of Science in Medical/Health Care Simulation core curriculum, • Provide a new or updated course outline that delivers the a) course description, b) learning goals and outcomes, c) required readings, d) grading format or rubrics and e) dates assignments are due and/or exams/quizzes will take place, • Provide a series of lectures / presentations to be delivered via a Web-based format (e.g. in Blackboard) and/or virtual synchronous student contact (e.g. through Zoom via web-cam) as scheduled with students, • Provide 15 hours of instruction per credit hour (e.g., 3 credit course is 45 hours of instruction), • Provide clear weekly assignments including due dates and the policies if assignments are late, and expectations for discussion and participation., • Create quizzes, exams and/or questions that encourage discussion, analysis of readings and presentations as well as discussion forums, • Answer students questions in a prompt manner, • Provide guidance as needed for students, • Submit grades in a timely manner per NYIT policy, • Complete any training for instructors that is required by NYIT (e.g., FERPA training, Blackboard training) Experience in simulation or medical education required. Proficiency using a computer and/or iPad. Proficiency using Microsoft. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $85.50/Hr. USD $85.50/Hr.

Are you looking to Optimize your life? Start your exciting path to a rewarding career today! We are Optimum, a leader in the fast-paced world of connectivity, and we're seeking driven and enthusiastic professionals to join our team, empower lives, fuel businesses, and drive innovation. Connectivity is now longer a luxury, but a necessity. A career at Optimum means you'll be enabling progress and enhancing lives by providing reliable, high-speed connectivity solutions that keep the world connected. Our successes, now and in the future, are powered by our amazing product, a commitment to our people and culture, and the connections we make in our communities. If you are resourceful, collaborative, and passionate about delivering consistent excellence, Optimum is for you! We are seeking a technically strong and inspirational Manager, Software Engineering to lead development efforts for internal and customer-facing tools. This role is pivotal in driving the success of our One Agent and Lightspeed platforms, which streamline operations and enhance customer experience. Will drive the development and execution of our technology roadmap to create the best tools on the planet for our front-line sales and tech teams,collaborate with cross-functional teams,and ensure the delivery of high-quality products that meet the needs of our customers and business objectives. • Lead and mentor a team of engineers across front-end and API development., • Provide hands-on technical guidance and unblock team members., • Oversee development of centralized platforms for agent and customer use., • Collaborate with cross-functional teams to deliver scalable solutions., • Ensure Agile best practices are followed across the team., • Manage both onsite and offshore development teams., • Split responsibilities across One Agent and Lightspeed applications., • Drive multi-scrum technology feasibility,delivery,and quality in partnership with product and design teams., • Effectively and respectfully drive technical team interactions,persuasively influencing architecture,software design,implementation,and incident recovery., • Advise team members on the quality of software designs,code,tests,and documentation., • Proactively build strong relationships with product,design,and business/operations counterparts within and across teams., • Understand and articulate the financial benefits and costs of capabilities,incorporating this information into decision-making., • Thoroughly vet and refine requirements to clearly articulate their intent., • Establish clear cost and time commitments to stakeholders,ensuring they are met with assistance., • Bachelor's Degree inComputer Science or a related field or equivalent work experience, • Minimum seven years of professional software development experience,including 3+ years in a leadership role, • Strong technical background in relevant technologies (e.g.,Go,Java,cloud platforms, CI/CD), • Strong experience in ReactJS, JavaScript, and Java, • Understanding of API development, • Proven leadership in managing distributed teams, • Deep knowledge of Agile methodologies, • Background in telecommunications an advantage, • Experience with customer-facing platforms and internal tools preferred, • Excellent communication and team-building skills, • Proven ability to lead and inspire engineering teams,foster collaboration,and drive results, • Excellent verbal and written communication skills,with the ability to tailor communication to different audiences, • Strong analytical and problem-solving skills,with a focus on finding creative solutions to complex challenges If you have the drive to succeed and are ready to embark on a thrilling career, seize this opportunity today, and join our winning team. Together, we'll shape the future of connectivity. All job descriptions and required skills, qualifications and responsibilities for a particular position are subject to modification by the Company from time to time, in the Company's discretion based on business necessity. We are an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. The Company collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. Applicants for employment with The Company will never be asked to provide money (even if reimbursable) as part of the job application or hiring process. Please review our ___ for further details. Pay is competitive and based on a number of job-related factors, including skills and experience. The starting pay rate/range at time of hire for this position in the posted location is$133,661.00 - $219,586.00 / year. The rate/range provided herein is the anticipated pay at the time of hire and does not reflect future job opportunity.

The Sales Director, Protection and Controls, is responsible for achieving overall sales goals and growing the installed base of Hubbell's technology products and services designed to secure, operate, and optimize the electrical distribution grid within the assigned territory.Utilizing both direct and indirect sales approaches, the Sales Director is responsible for leading the customer engagement within the assigned territory and developing winning strategies to assess customer needs, develop market leading solutions, gather/communicate market intelligence, and win business with current and new customers. Candidate must reside in one of the following states (PA, OH, MI, WV, VA, MD, DE, DC). Marketing: • Understand regional, state, and national dynamics within their region to promote Hubbell as a market leader in electrical grid automation, • Develop and maintain a network of contacts within utility management, project teams, channel partners, and industry stakeholders, • Identify and develop opportunities to grow business with new and existing customers, • Advocates to customer's stakeholders to drive and acquire funding mechanisms to expand market opportunities, • Assess competitor offerings and develop differentiated market approaches, • Develops and leads implementation of long-term account-based marketing campaigns, • Consolidate and convey marketing intelligence related to emerging customer needs and competitor products, • Contribute to product development ideas and specifications, • Works closely with Product Management, Business Development, Technical Support and sales team to gather product Voice of the Customer, • Lead the commercialization process for new offerings in the market, • Conduct market research and special projects as required, • Ensures proper flow of market intelligence with particular emphasis on trends and technical differences Sales Activities: • Achieves current year sales targets and year-on-year growth plans by analyzing territory and customers to develop specific region plan, • Implement specific sales programs to promote Hubbell products and services, • Conducts product presentations and demonstrations that promote Hubbell's capabilities, • Ensures full sales support and customer knowledge for protection, controls, and quality systems within assigned territory., • Overcomes technical and business objections of prospective and current customers by providing technical solutions based on utility protection, controls and quality system expertise, • Works collaboratively with Commercial Operations to prepare proposals and obtains internal approvals, • Assist when necessary, in establishing customer credit and collection of receivables, • Keeps customer information, opportunity pipeline, and forecasts current in relevant internal CRM systems, • Controls sales expenses to meet budgets and maintains a proper ratio for their assigned territory Sales Channel Management: • Collaborates with Sales Channel Leadership to evaluate, establish and maintain a network of independent sales agents/distributors, • Assigns, directs, and supports the efforts of agents/distributors, • Supervises agents/distributors within assigned territory, • Keep Sales, Customer Technical Service teams, and other Hubbell personnel informed of agent/distributor assignments, • Ensures implementation of current Hubbell policies and procedures for sales agents/distributors, • Applies systematic reviews to evaluate all agents/distributors under their jurisdiction for compliance with established procedures and identify training needs, • Keeps agent/distributor contracts on a current basis in conjunction with Sales Channel Leadership, • Integrates Hubbell strategies through their assigned agents/distributors to achieve objectives and goals, • Accepts the lead role in coordinating project and quotation activities between agencies (and Regions) to maximize sales opportunities, • Develops bookings and/or sales quota assignments for their agents/distributors To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Educational and Experience Requirements: • BS in Engineering(Electrical Engineering preferred) or equivalent two year degree with 15+ years industry experience in utility protection and controls in a technical role, • 5 - 10 years of experience in power generation, transmission and distribution systems along with associated communications and software systems. Specific experience in distribution automation, protection, controls and power quality systems at an electric utility organization is strongly preferred., • 3 - 5 years of experience in sales, commercial, or product management roles., • Experience working and supervising independent sales agent/distributors preferred. Skills and Knowledge: • Knowledge of Hubbell and competitor products and services and their applications in the generation, transmission, and distribution of electric power, and power quality measurement., • Knowledge of utility back- office integrations for distribution automation & AMI applications., • Knowledge of the application of domestic and international electrical standards, such as UL, IEC, ANSI, IEEE and CE, and local laboratory certificate requirements., • Ability to write and publish technical papers., • Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents., • Ability to respond to common inquiries or complaints from customers (at all levels), regulatory agencies, or members of the business community with tact and diplomacy., • Ability to write speeches and articles for publication that conform to prescribed style and format., • Ability to travel up to 50% via air or land. Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Job Location(s) US-NY-Old Westbury Job ID 2024-3734 Division Campus Dining Position Type Staff (Dining) Type Regular Part-Time Category Food Services New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. New York Institute of Technology - Division of Campus Dining seeks a part-time Barista to work at our cafe on the Long Island campus. Responsibilities include: • Must learn to operate and serve coffee beverages with use of espresso machine and follow the Starbucks recipes for all beverages and serve beverages in a timely manner., • Have all drink bases, coffees, milk and other items needed for operation of "We Proudly Serve Starbucks" at the start of each shift., • Maintain and clean espresso machine, cold brew machine, coffee brewers and other related coffee equipment on a daily and weekly schedule., • Ensure at the end of each shift that any items needed for coffee bar area needed for the next day are communicated to shift lead and Culinary Operations Manager.N, • Keep up to date on seasonal Starbucks coffee offerings that can and should be offered., • Weekly ordering of any and all items pertaining to the Starbucks coffee bar area; as well as any other items needed for the cafe., • Ensure the cashier's station is set up and ready for service at the designated time., • Maintain log book of errors and customer returns. Report all entries to supervisor daily., • Customer Service:, • Greet all customers upon entrance and thank customers for their business upon exiting., • Provide prompt, courteous, and efficient service., • Respond to customer comments; report applicable comments to management., • Maintain awareness of cafe at all times. Take initiative to assist customers with offerings of the cafe., • Front of House Duties:, • Replenish and clean 'grab-and-go' and service area during less busy periods and as needed, • Set up components of the Salad bar station, • Ensure all fruits, vegetables, components are properly stocked and ready for service, • Ensure all machines are operating properly. Communicate issues with equipment to supervisor swiftly, • Actively keep the station and machinery clean sanitized at all times. Follow proper storage, sanitation and closing procedures for the station at the end of each shift., • Ensure all recipe cards are cleaned, sanitized, dried and put away before the end of your shift, • Serve as backup to the cooks if help is needed; set up and stock and serve food to students, • Along with the kitchen staff, using the ordering to sheet to document any low inventories of items used by the attendants each day such as;, • Overhead items- napkins, plates, utensils, straws, cups etc., • PC items- cream cheese, butter, sugars, sweeteners, condiments, • Coffee station items - all coffees, filters, stirrers, coffee sleeves, creamers, dairy products, • Any and all product pertaining to your restocking duties, • Maintenance and Cleaning:, • Assist with daily cleaning duties in the dining location and seating areas including:, • Clean equipment, work areas and floors daily, • Operate dishwasher and/or scrubbing pots and pans, • Clean up lines at end of the meal shift, • Dispose of or store leftovers and clean tables from debris, • Cleaning of espresso machine, cold brew machine, coffee brewers and other related coffee equipment on a daily and weekly schedule, • Comply with Nassau County Sanitation Guideline requirements (HACCP) for appearance and hygiene at all times while engaging in handling food, drink, utensils or equipment, • Time sheets and oracle time must be filled out on the last day worked and submitted, • Must complete the sanitation check list for daily, weekly and monthly cleaning, • Fill out sheet with days and dates for the cleaning of the espresso and coffee brewer machines and carafs, • Must be able to work in other areas on campus as needed, such as DeSeversky Mansion, all campus cafes, kiosks, food trucks and any/all special events on or off campus., • Must be able to work in other positions, such as utility, prep cook, server, as needed should employees in those positions not be able to work due to vacation, sick or personal time., • Must be able to work a flexible schedule including weekends, nights and holidays, as needed Excellent communication and customer service skills Ability to perform basic mathematics including: adding, subtracting, multiplying, and dividing Advanced computer skills (outlook, Microsoft word, excel, basic computer knowledge). Valid NYS Drivers license. PHYSICAL EFFORT AND STRESS. While performing the duties of this job, the employee is frequently required to stand for extended periods of time. The employee must occasionally lift and/or move up to 40 pounds. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $23.00/Hr. USD $23.00/Hr.

Job Location(s) US-NY-Jericho Job ID 2025-4051 Division Campus Dining Position Type Staff (Dining) Type Regular Full-Time Category Food Services New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. New York Institute of Technology, Division of Campus Dining seeks a full-time Lead Attendant to work the Cafe at our Jericho location for our Long Island campus: Principal Responsibilities: • Preparing and setting up of breakfast items for service (pastries, cut fruit, oatmeal, hot food buffet), • Preparing and setting up of dinner items for service (salad bar, pizza, desserts, hot food buffet), • Must work between all cafes on campus as needed, • Must work any special events on campus as required, • Customer Service:, • Greet all customers upon entrance and thank customers for their business upon exiting, • Provide prompt, courteous, and efficient service, • Respond to customer comments; report applicable comments to management, • Front of House Duties:, • Replenish and clean service area during less busy periods and as needed, • Set up components of the buffet/salad bar items, • Ensure all fruits, vegetables, components are properly stocked and ready for service, • Ensure all machines are operating properly. Communicate issues with equipment to supervisor swiftly, • Understanding of all ingredients and how to produce all items on the station, • Actively keep the station and machinery clean sanitized at all times. Follow proper storage, sanitation and closing procedures for the station at the end of each shift., • Along with the shift lead, using the ordering sheet to document any low inventories of items used by the attendants each day such as;, • Overhead items- napkins, plates, utensils, straws, cups etc., • PC items- cream cheese, butter, sugars, sweeteners, condiments, • Beverage station items - coffees, Juices, Soda syrups, CO2 tanks, creamers, dairy products, • Any and all product Pertaining to your restocking duties, • Serve as backup to the cooks if help is needed; set up and stock and serve food to students, • Maintenance and Cleaning:, • Assist with daily cleaning duties in the dining location and seating areas including:, • Clean equipment and work areas., • Operate dishwasher and/or scrubbing pots and pans., • Clean up lines at end of the meal shift., • Dispose of or store leftovers and clean tables from debris, • Comply with Nassau County Sanitation Guideline requirements (HACCP) for appearance and hygiene at all times while engaging in handling food, drink, utensils or equipment., • Time sheets must be filled out on the last day worked and submitted., • Must complete the sanitation check list for daily, weekly and monthly cleaning., • Must be able to work in other areas on campus as needed, such as DeSeversky Mansion, all campus cafes, kiosks, food trucks and any/all special events on or off campus., • Must be able to work in other positions, such as utility, prep cook, server, as needed should employees in those positions not be able to work due to vacation, sick or personal time., • Must be able to work a flexible schedule including weekends, nights and holidays, as needed. Educational Requirements: (High School or Equivalent), or a combination of education and experience from which comparable knowledge and skills are acquired Must have or be working toward Serve-Safe Certification, and follow the HACCP policies and procedures Must have valid Nassau County Health Department certificate Excellent communication and customer service skills Excellent computer skills (outlook, Microsoft word, excel, basic computer knowledge) Ability to perform basic mathematics including: adding, subtracting, multiplying, and dividing Ability to work a flexible schedule Advanced computer skills PHYSICAL EFFORT AND STRESS. While performing the duties of this job, the employee is frequently required to stand for extended periods of time. The employee must occasionally lift and/or move up to 40 pounds. New York Institute of Technology offers numerous opportunities to enhance personal and professional growth and provides employees with a competitive compensation and benefits program. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $30,000.00/Yr. USD $35,000.00/Yr.

Job Location(s) US-NY-Old Westbury Job ID 2025-4078 Division College of Osteopathic Medicine Position Type Temporary Staff Type Temporary Part-Time Category College of Osteopathic Medicine New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. Administer examinations to NYIT College of Osteopathic Medicine students. Must be professional, and organized, able to multi-task, and computer efficient. Ability to enforce NYITCOM/NYIT policies for exams. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $22.00/Hr. USD $22.00/Hr.

Job Location(s) US-NY-Old Westbury Job ID 2025-4052 Division College of Engineering & Computing Sciences Position Type Adjunct Type Regular Part-Time Category College of Engineering and Computing Sciences New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The BS Engineering Management program at New York Institute of Technology is looking for adjunct faculty to teach courses for this program, such as Operation Research, Senior Design, Technology and Global Issues. Candidates should have a M.S or Ph.D. degree in Engineering Management, Industrial Engieneering or a related area. Teaching experience or industrial experience are preferred. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank. USD $99.00/Hr. USD $108.00/Hr.

Job Location(s) US-NY-Old Westbury Job ID 2025-4084 Division College of Engineering & Computing Sciences Position Type Adjunct Type Regular Part-Time Category College of Engineering and Computing Sciences New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The Department of Computer Science at New York Institute of Technology is looking for an adjunct professor to teach undergraduate students at its Long Island (Old Westbury) campus. Candidates should have a M.S or Ph.D. degree in Computer Science, Information Technology, Data Science, Cybersecurity, or a related area. Teaching experience or industrial experience in Computer Science, Artificial Intelligence, programming languages LISP, PROLOG and object-oriented programming and related Lab applications are preferred. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank. USD $99.00/Hr. USD $108.00/Hr.

Job Location(s) US-NY-Old Westbury Job ID 2025-4337 Position Type Staff Type Regular Full-Time Category Career Success & Experiential Education New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. New York Tech's Office of Career Success and Experiential Education, seeks an Assistant Director, Career Success and Experiential Education located at the Long Island (Old Westbury, NY) campus. At least 4 days in the Long Island office per week. • Assist in managing Experiential Education programs including the Internship Certificate Program and Service-Learning: student, employer, faculty communication, day-to-day operations, reporting support., • Serve as an advisor to students engaging in experiential and career education programs., • Support the Consultants for the Public Good Program on the Long Island campus including program management, promotion, recruitment and evaluation., • Advise students and alumni on all areas of career development and career management including resume writing, interviewing and presentation skills, job search techniques and networking., • Collaborate with academic partners to deliver career-related workshops, class presentations, and additional outreach programs to student organizations., • Represent Career Success and Experiential Education at Admissions Open Houses, orientation programs, and other college-wide events which may occur on the weekend or in the evening., • Assist with ongoing community partnerships aligned with CSEE initiatives., • Perform other duties as assigned., • A bachelor's degree is required; a master's degree is preferred., • Demonstrate understanding of experiential education., • Demonstrate previous experience with developing, promoting, managing and assessing programs., • Demonstrate knowledge of technical skills in common software including Microsoft Office, Teams, Zoom, Google Drive. Knowledge of Career Management Software is a plus., • 1-2 years of experience in career services, higher education, student affairs, human resources, advising or a related field required., • Exceptional written and verbal communication and interpersonal skills. Strong organizational and administrative skills and demonstrated ability to work in a team environment and to manage multiple projects., • Strong critical thinking, time management, and intercultural communication skills., • Bilingual in Hindi or Urdu a plus, but not required. New York Institute of Technology offers numerous opportunities to enhance personal and professional growth and provides employees with a competitive compensation and benefits program inclusive of generous paid time off, holidays, tuition remission, and retirement plans with employer contributions. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $62,000.00/Yr. USD $62,000.00/Yr.

Job Location(s) US-NY-Old Westbury Job ID 2025-4130 Position Type Staff Type Regular Full-Time Category Graduate, Global and International Admissions New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. Reporting to the Dean of Admissions and Financial Aid, New York Tech's New York campuses seek a Director of Graduate Admission, who will create and execute a strategic recruitment plan, specifically geared towards impacting graduate enrollment goals at the institution. This role is considered a hybrid/remote position that offers the flexibility of working remotely and may require travel to New York City and Long Island campuses, in line with NYTech policy. Develop and implement a comprehensive recruitment strategy plan to meet admission goals, primarily at New York campuses. • Using internal and external data, provide annual assessment of effectiveness of enrollment strategies and provide periodic reports and ongoing recommendations., • Manage a team of graduate advisors who are responsible for recruiting and enrolling students into graduate programs., • Develop, in conjunction with Deans, partnership opportunities with regional businesses., • Oversee and participate in recruitment travel and events, including graduate fairs, corporate events, conferences and other opportunities to engage prospective students. Travel to all NY campuses is required. Support on-campus recruitment events including Open Houses, Admitted Student Days and virtual events., • Partner collaboratively with academic departments to create engaging admissions events and experiences for prospective students., • Serve as a leader in Graduate Recruitment, sharing best practices with departments, schools and key constituents within the university., • Provide exceptional customer service to all and perform other duties as assigned., • Bachelor's degree required; Master's degree is a preferred *, • Five to eight years of graduate admissions experience is preferred. At least five to eight years of experience in recruitment or customer service a plus., • Qualified candidates must demonstrate excellent interpersonal, organizational and prioritizing skills as well as superior attention to detail *, • Must be proficient in Microsoft Office; experience working in student information systems (Peoplesoft) and customer relationship management systems (Slate). * Must possess the ability to build relationships with stakeholders as it relates to graduate and international recruitment, including feeder schools, educational agencies and external organizations., • Five or more years of proven experience sales or outreach in a fast-paced, goal-oriented operation is essential., • Must be able to work some evenings and weekends., • Strong communication skills, organizational skills, patience, the ability to work under pressure and multitasking skills are critical to the position., • Preferred Requirements: Corporate recruitment experience is a plus, as is experience in the training and management of admissions counselors., • Must have a valid drivers license. New York Institute of Technology offers numerous opportunities to enhance personal and professional growth and provides employees with a competitive compensation and benefits program inclusive of generous paid time off, holidays, tuition remission, and retirement plans with employer contributions. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $90,000.00/Yr. USD $93,000.00/Yr.

Are you looking to Optimize your life? Start your exciting path to a rewarding career today! We are Optimum, a leader in the fast-paced world of connectivity, and we're on the hunt for enthusiastic professionals to join our team! We understand that connectivity isn't just a luxury anymore - it's a necessity that empowers lives, fuels businesses, and drives innovation. A career at Optimum means you'll be enabling progress and enhancing lives by providing reliable, high-speed connectivity solutions that keep the world connected. We owe our success to our amazing product, commitment to our people and the connections we make in every community. If you are resourceful, collaborative, team-oriented and passionate about delivering consistent excellence, Optimum is the Company for you! We areOptimum! The Product Development organization is responsible for the technology enablement and development of technologies for our customers along with the tools used by our teams to support them. Reporting to the Engineering Manager, the Software Development Engineer II DevOps Toolchain will participate as part of a highly skilled software development team to build the tools, processes and automation frameworks that will improve productivity, drive efficiency, and ensure the quality and reliability of our software products. We are looking for a passionate and engaged individual who is willing to take on the challenge of transforming software development at a Fortune 500 company and building the tools that will allow our development teams to Go Fast! • Contribute to our software development tools strategy accelerating our development teams., • Execute on the implementation of our tools roadmap that includes an CI/CD pipeline that will be leveraged by the software development teams across the organization to support our broadband, video, mobile and customer support applications., • Implement tools to identify, document and track software defects. Work closely with the development teams to resolve issues and ensure timely fixes., • Introduce capabilities to do effective A/B testing of releases across test populations., • Lead process improvement initiatives to enhance testing practices, tools, and metrologies., • Implement tools to monitor and report on key quality metrics including defect rates, test coverage and test execution progress. Analyze metrics to identify areas for improvement., • Leverage developer tools and test automation to transform our software release processes and enable the development teams to get capabilities to customers faster., • Use and customize out of the box tools to instrument and monitor systems., • Contribute to a structured knowledge base that allows teams to create, maintain and extend documentation for all our developer tools and processes., • Establish and gain acceptance for Key Results indicated by our development pipeline and automation test frameworks., • Use prototypes and proof of concepts as the primary tool for deep and detailed explorations of architecture and software designs., • Go-to advocate for developer tools in the organization., • Continue to make Optimum a Developer Friendly Environment., • Bachelor's degree in computer science or related field required., • Minimum 3-5 years of experience in software development, automation, and tools., • Proficiency in variety of programming languages (Java & C), • Experience with Google cloud or Amazon Web Services and their capabilities., • Thorough understanding of software methodologies and DevOps practices., • Experience with the implementation and optimization CI/CD Pipelines., • Experience with the automation of test cases., • Good intuition for software design, actively looking to learn from other teams and projects., • Experience with data formats and locality with performance considerations., • Demonstrated experience solving performance and data issues by applying experience/knowledge., • Completely comfortable working with live production systems, debugging issues and taking careful actions with protections against damage., • Contributes to establishing and maintaining corporate policies related to technology. If you have the drive to succeed and are ready to embark on a thrilling career, seize this opportunity today, and join our winning team, so together, we'll shape the future of connectivity. All job descriptions and required skills, qualifications and responsibilities for a particular position are subject to modification by the Company from time to time, in the Company's discretion based on business necessity. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, national origin, religion, age, disability, sex, sexual orientation, gender identity or protected veteran status, or any other basis protected by applicable federal, state, or local law. The Company provides reasonable accommodations upon request in accordance with applicable requirements. Optimum collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state, and local law. Applicants for employment with the Company will never be asked to provide money (even if reimbursable) as part of the job application or hiring process. Please review our ___ for further details. Pay is competitive and based on a number of job-related factors, including skills and experience. The starting pay rate/range at time of hire for this position inis $100,246.00 - $143,208.00 / year. For other locations, please inquire with your recruiter. The rates/ranges provided herein are the anticipated pay at the time of hire, and do not reflect future job opportunity.

Are you looking to Optimize your life? Start your exciting path to a rewarding career today! We are Optimum, a leader in the fast-paced world of connectivity, and we're on the hunt for enthusiastic professionals to join our team! We understand that connectivity isn't just a luxury anymore - it's a necessity that empowers lives, fuels businesses, and drives innovation. A career at Optimum means you'll be enabling progress and enhancing lives by providing reliable, high-speed connectivity solutions that keep the world connected. We owe our success to our amazing product, commitment to our people and the connections we make in every community. If you are resourceful, collaborative, team-oriented and passionate about delivering consistent excellence, Optimum is the Company for you! We areOptimum! Optimum is a leading provider of Mobile, Broadband (DOCSIS, Fiber) and Video services in the United States. The Product Development organization is responsible for the technology enablement and development of these technologies for our customers along with the tools used by our teams to support them. Reporting to the Engineering Manager, the SQE II QA Automation Engineering for mobile products will participate as part of a highly skilled software development team to accelerate the automation of our mobile products' end-to-end testing capabilities (both iOS and android). We are looking for a passionate and engaged individual who is willing to take on the challenge of transforming software development at a Fortune 500 company and building the tools that will allow our development teams to Go Fast! • Contribute to our software development tools roadmap accelerating our development teams., • Automate our end-to-end testing capabilities across all products including broadband, video, customer support and technician support tools to 80% automated test coverage., • Develop and maintain automated test scripts and frameworks (in Java or Python) to enhance testing efficiency and coverage.Implement appropriate tools for automation., • Introduce capabilities to do effective A/B testing of releases across test populations., • Leverage developer tools and test automation to transform our software release processes and enable the development teams to get capabilities to customers faster., • Contribute to a structured knowledge base (Atlassian Confluence) that allows teams to create, maintain and extend documentation for all our developer tools and processes., • Implement tools to identify, document and track software defects (Qase/Jira).Work closely with the development teams to resolve issues and ensure timely fixes., • Lead process improvement initiatives to enhance testing practices, tools, and metrologies., • Implement tools to monitor and report on key quality metrics including defect rates, test coverage and test execution progress.Ability to make/maintain API suites a must!, • Establish and gain acceptance for Key Results indicated by our development pipeline and automation test frameworks., • Use prototypes and proof of concepts as the primary tool for deep and detailed explorations of architecture and software designs., • Go-to advocate for automation in the organization., • Continue to make Optimum a Developer Friendly Environment., • Bachelor's degree in computer science or related field or equivalent experience, • Minimum 5 years of experience in software development, automation, and tools with at least 3 years experience in mobile automation, • Proficiency in variety of programming languages (Python or Java is a must, JS or Go is a nice to have), • Experience with Google cloud or Amazon Web Services and their capabilities, • Thorough understanding of software methodologies and DevOps practices, • Experience with the implementation and optimization CI/CD Pipelines, • Experience with the automation of test cases, • Good intuition for software design, actively looking to learn from other teams and projects, • Experience with data formats and locality with performance considerations, • Demonstrated experience solving performance and data issues by applying experience/knowledge, • Completely comfortable working with live production systems, debugging issues and taking careful actions with protections against damage, • Contributes to establishing and maintaining corporate policies related to technology If you have the drive to succeed and are ready to embark on a thrilling career, seize this opportunity today, and join our winning team, so together, we'll shape the future of connectivity. All job descriptions and required skills, qualifications and responsibilities for a particular position are subject to modification by the Company from time to time, in the Company's discretion based on business necessity. We are an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. The Company collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. Applicants for employment with The Company will never be asked to provide money (even if reimbursable) as part of the job application or hiring process. Please review our ___for further details. Pay is competitive and based on a number of job-related factors, including skills and experience. The starting pay rate/range at time of hire for this position in the posted location is$100,246.00-$164,689.00/ year. The rate/range provided herein is the anticipated pay at the time of hire, and does not reflect future job opportunity. We appreciate your interest in this opportunity. Applicants must be authorized to work for ANY employer in the U.S. Please note that at this time, we do not provide visa sponsorship for employment.

Are you looking to Optimize your life? Start your exciting path to a rewarding career today! We are Optimum, a leader in the fast-paced world of connectivity, and we're on the hunt for enthusiastic professionals to join our team! We understand that connectivity isn't just a luxury anymore - it's a necessity that empowers lives, fuels businesses, and drives innovation. A career at Optimum means you'll be enabling progress and enhancing lives by providing reliable, high-speed connectivity solutions that keep the world connected. We owe our success to our amazing product, commitment to our people and the connections we make in every community. If you are resourceful, collaborative, team-oriented and passionate about delivering consistent excellence, Optimum is the Company for you! We areOptimum! The Senior Enterprise Security Architect is responsible for providing subject matter expertise in designing and implementing the security direction across Optimum's enterprise platforms. This role emphasizes hands-on technical leadership, guiding the implementation, configuration, and automation of security controls to meet and exceed compliance and risk management goals. You will report to the Director of Enterprise Security Architecture and collaborate with other security architects, security engineers, network engineers, and application architects to ensure deployment of secure, scalable, and resilient solutions. Proficiency in cloud platforms (GCP, AWS, Azure) and a deep understanding of modern security practices are essential. • Provide technical leadership and mentorship to other Security Architects and Engineers., • Design, implement, and maintain enterprise security infrastructure aligned with architectural guidelines., • Provide subject matter expertise on technologies, best practices, and industry trends, ensuring Optimum remains at the forefront of innovation., • Design, implement, Document, and maintain complex security infrastructure to support Applicationdevelopment under defined Architecture Guidelines, in the Enterprise environment., • Help teams maintain and follow Security Architecture Best Practices, established standards, and provide solutions/proof of concepts., • Create, document, and promote security reference architecture consumable by engineering and development teams., • Provide subject matter expertise to promote a program of Secure by Design principles, ensuring adoption across the organization, ensuring that security is built into solutions from the outset, rather than being added as an afterthought., • Conduct platform, tool, and process assessments to evaluate existing security controls, identify weaknesses, and make recommendations and process improvements., • Assess security threats and risks to define and implement appropriate architectural security models., • Conduct in-depth technical research on the security implications of new technologies., • Participate in efforts and provide material support to business teams by planning and designing architectural solutions in support of security strategies and cross-functional technology teams throughout the organization., • Ensure that the platform's security risk controls, mitigations, and approach are aligned with security standards, IT, and business goals., • Ensure the proper security architecture and governance practices are put in place for emerging technologies such as AI/ML, GenAI, and other emerging technologies., • Software development architecture, including oversight and mandates for activities such as threat modeling for secure solution design, and specifically for Web Services design, as well as the OWASP Top Ten resilience reference architecture., • Provide direction and share insights on DevSecOps methodologies and practices, including operational discipline, security logging, monitoring, and alerts, which are essential components of the process., • Ensure security policy, compliance requirements, and best practices are implemented across the project portfolio., • Provide enterprise security and architectural guidance to ensure that the infrastructure supporting customer-facing products is compliant with legal, regulatory, and industry security standards., • Actively participate in long-term roadmap planning and architectural vision for Enterprise Security, • Collaborates with External Vendors, ensuring that their security practices align with the organization's security architecture standards., • Bachelor's degree in Computer Science or related field preferred, • Enterprise Security / Enterprise Architecture Certifications (CISSP, CCSP, TOGAF 9, GCP Professional Cloud Architect, Azure Solutions Architect, etc.) preferred, • Prefer ten or more years of experience in Information Technology, • Prefer eight or more years of direct IT Security experience in one or more of the ten security domains, • Excellent analytical and problem-solving skills, with the ability to assess complex issues and develop effective solutions, • Strong communication and interpersonal skills, with the ability to collaborate effectively with stakeholders at all levels of the organization, • Broad technical experience in several security disciplines, including endpoint and platform (Unix/Linux/Windows, mobile) controls, encryption/tokenization, identity and access management, PKI, data protection, and security tooling integration in complex environments, • Expertise across multiple security disciplines such as Data Protection, Compliance Validation, Vulnerability Experience with Network Security, Infrastructure Security (Active Directory, Group Policy, Endpoint management), CI/CD Security, Identity and Access Management, Logging and Monitoring, Incident Response, Data and Analytics, and Resiliency, • Experience with Infrastructure as Code deployments and the security review process, • Ability to communicate complex technical concepts to diverse audiences, • Hands-on experience with Security Services in Azure and in AWS such as IAM, KMS, VPC, Security Groups, AWS Inspector, and Guard Duty, • Experience building security reference architectures for complex information systems based on industry frameworks If you have the drive to succeed and are ready to embark on a thrilling career, seize this opportunity today, and join our winning team, so together, we'll shape the future of connectivity. All job descriptions and required skills, qualifications and responsibilities for a particular position are subject to modification by the Company from time to time, in the Company's discretion based on business necessity. We are an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. The Company collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. Applicants for employment with The Company will never be asked to provide money (even if reimbursable) as part of the job application or hiring process. Please review our ___for further details. Pay is competitive and based on a number of job-related factors, including skills and experience. The starting pay rate/range at time of hire for this position in the posted location is $155,509.00 - $222,156.00 / year. The rate/range provided herein is the anticipated pay at the time of hire, and does not reflect future job opportunity.

Job Location(s) US-NY-Old Westbury Job ID 2025-4077 Division College of Osteopathic Medicine Position Type Temporary Staff Type Temporary Part-Time Category College of Osteopathic Medicine New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. New York Institute of Technology College of Osteopathic Medicine, Long Island (Old Westbury) campus seeks part-time/per-diem Standardized Patients (SPs) to participate in a challenging, medical education clinical training program. Selected candidates will be trained to simulate symptoms and illnesses for routine medical student examinations, undergo practice physical examinations (no invasive exams), assess clinical skills of participating medical students and provide feedback to learners. In descending order of importance, please list the duties and responsibilities performed in this position. Also, include the estimated percentage of time devoted to each duty. The sum of all the percentages should total 100%. Duties may be pasted from other pre-existing job descriptions documents/worksheets. • To paste duties from an Excel document, please ensure that the duties appear in separate, individual cells before pasting below., • Interview prospective Standardized Patient candidates and make decision regarding hiring, • Prepare training materials and train SP for case portroyal, • Manage daily SP activities and needs Knowledge, Skills and Abilities: Ability to describe essential components of Standardized Patient trainin Basic knowledge of adult learning theories and practices; understanding of medical / healthcare care issues essential to training Standardized Patients Training SPs in case portrayal, checklist documentstion, communication assessment and debriefing and feedback Ability to work: To work as a team player; exhibit social and emotional intelligence; excellent writing and editing skills; coaching / preparing Standardized Patients; excellent written and verbal communication skills with staff and learners; knowledge of excel We offer competitive wages and flexible schedules. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $27.00/Hr. USD $27.00/Hr.

Job Location(s) US-NY-Old Westbury Job ID 2026-4419 Position Type Staff Type Regular Full-Time Category College of Osteopathic Medicine New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenes, and reinvent the future. For more information, visit nyit.edu. NYTech's College of Osteopathic Medicine seeks an Early Clinical Experiences (ECE) Coordinator at the Long Island (Old Westbury, NY) campus. Assign and manage schedules of students engaged in ECE with the clinical sites. • Manage agreements, paperwork, materials needed by the clinical sites as well as paperwork needed to be completed by students., • Interface and coordinate with clinical sites/ preceptors that will accept yr 1 and yr 2 students for ECE., • Track and maintain attendance records. Follow up and assign make-up sessions as needed., • Track and organize ECE reflection assignments as well as Clinical Practice Reflections (CPR) reflection assignments., • Serve as back-up for Exam Coordinators., • Serve as back-up for Curriculum Coordinators., • Orient Students and Clinical Sites/Preceptors to Early Clinical Experience Process/Expectations., • Develop and update, as needed, Early Clinical Experience policy, practice, and procedure manuals for (1) Students and (2) Clinical Sites/Preceptors. Strong computer, interpersonal, and organizational skills required. Excellent verbal and written communication skills. Ability to manage multiple tasks in a fast-paced environment. New York Institute of Technology offers numerous opportunities to enhance personal and professional growth and provides employees with a competitive compensation and benefits program inclusive of generous paid time off, holidays, tuition remission, and retirement plans with employer contributions. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $45,000.00/Yr. USD $50,000.00/Yr.

Job Location(s) US-NY-Old Westbury Job ID 2026-4465 Division Academic Health Care Center Position Type Staff Type Regular Part-Time Category College of Osteopathic Medicine New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. NYTech's College of Osteopathic Medicine seeks a Speech Pathologist, part time, located at the Long Island (Old Westbury, NY) campus. The Speech/Language Pathology Service provides direct service to patients with communication and swallowing disorders. Provide treatment of patients according to accepted standards of clinical practice and applicable insurance guidelines. Evaluation of patients using accepted standard of clinical practice and assessment batteries appropriate to the patient's diagnosis are administered. Writes comprehensive speech, language, cognitive, voice and/or swallowing report that are sent to the referring physician. Completes daily notes and progress reports in a timely manner. Functions as part of an interdisciplinary team. Actively participates in the process of patient, family and staff education/counseling. Individuals with Parkinson's disease are specifically treated with modification of Lee Silverman Voice Treatment (LSVT) program or Speak Out! Program. Additional therapies include speech, language, cognitive linguistics, dysphagia and voice. Attend clinical rounds, departmental meetings, and care plan meetings and reports patient status and progress in accordance with facility standards. Maintains annual continuing education requirements for clinical practice. Master's degree with a major in speech-language pathology. Holds a certificate of clinical competence and licensure granted by the American Speech and Hearing Association Required field of expertise in Neurological Rehabilitation; preferred expertise in Geriatric Rehabilitation. A Health and Wellness Certification is preferred. Must be competent in creating hand and wrist splints. Must be able to recommend and educate in the use of adaptive equipment for facilitation of activities in daily living. CPR Certification is preferred. A minimum of 3 years' experience is preferred. Please submit cover letter & resume for consideration. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $50.00/Hr. USD $53.00/Hr.

Job Location(s) US-NY-Old Westbury Job ID 2026-4459 Division Clinical Sciences Position Type Faculty Type Regular Part-Time Category College of Osteopathic Medicine New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. NYTech's College of Osteopathic Medicine seeks an Assistant/Associate Professor part time, Clinical Sciences, located at the Long Island (Old Westbury, NY) campus. Support the Department of Family Medicine and its activities to include Small Group Teaching or other assigned areas called upon by the department chairperson, and college service (including, but not limited to, attendance at departmental and school-wide meetings, and on committees). Perform other duties as assigned. This is a part time position. Fringe benefits will not be provided. D.O. degree from a school of osteopathic medicine. Completion of an AOA or ACGME-approved residency. Board Certified, New York State License, DEA # and hospital appointment/privileges (or pending application) for active medical staff privileges. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $20,000.00/Yr. USD $20,000.00/Yr.

Job Location(s) US-NY-Old Westbury Job ID 2025-4083 Division College of Engineering & Computing Sciences Position Type Adjunct Type Regular Part-Time Category College of Engineering and Computing Sciences New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The BS Mechanical Engineering program at New York Institute of Technology is looking for adjunct professors to teach courses for this program, such as Material Science, Energy Systems. Candidates should have a M.S or Ph.D. degree in Mechanical Engineering or a related area. Teaching experience or industrial experience in Materials Science, Thermal/Fluid are preferred. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank. USD $99.00/Hr. USD $108.00/Hr.

Job Location(s) US-NY-Old Westbury Job ID 2025-3976 Division NYIT de Seversky Mansion Position Type Staff (Dining) Type Regular Part-Time Category Hospitality New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. Coordinate with the Sales Department for the event drop-off and set up of personal items which may include place cards, gift box, pictures, guest book, cake topper, amenity baskets, cake knife and server, champagne flutes, party favors, etc. • Responsible for items to go home with couple at end of night., • Serve the couple throughout dining service to ensure they experience first class customer service, • Orchestrate ceremony and reception details and assist with ceremony rehearsal and procession of ceremony., • Be present during all photographs of the wedding party and follow with drinks and food as needed., • Assist with introductions into the dancing reception always., • Be attentive to other VIP guests at the wedding and reception, including immediate family and wedding party members., • Ensure wedding party have personals and bouquets and assist groomsmen with boutonnieres when necessary., • Replenish and serve bride and bridal party food and drinks as needed and requested including but not limited to the wedding party suites., • Maintain emergency "bridal kit" to ensure all items needed are fully stocked at all times., • Help the Bride/Maitre D during the reception (gathering VIP guests and bridal party for the cake cutting, dancing, bouquet toss and other formalities)., • Review special seating arrangements prior to the ceremony for reserved rows., • Refresh and clean suits for couples return after ceremony., • Help wrap up all final details and carefully/neatly pack up any leftover items from the host, including drop-off items and to be given to hosts of event night of event., • Work closely with the event manager and coordinators under their direction., • Dinner orders and drink orders for the couple., • Assist serving food to dining tables when needed. Assist during cocktail hour bussing food, with keeping priority to the couple., • Communicate in the end of shift report, known as a recap, including all closing details, reports about the couple, how the service and event went etc., • Assist with setting up events during downtime including but not limited to glassware, silverware, chinaware, linens, menus, napkin, cocktail tables, stations, and outdoor ceremony., • Always ensure a clean and safe environment. Minimum 2 years relevant experience preferred. Ability to work cooperatively and effectively with peers, subordinates, supervisors, parents, and outside agencies. Positive and professional demeanor and works well within a team setting. Varying schedule that will include weekends, holidays and 10-hour shifts as business dictates. Ability to work in a fast-paced environment. Stand and walk for long periods of times. Able to lift a manage trays of food and glasses with weights at times exceeding 25lbs. Must be willing to work in both indoor and outdoor settings where varying weather and temperature conditions can be expected. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $22.00/Hr. USD $25.00/Hr.

Are you looking to Optimize your life? Start your exciting path to a rewarding career today! We are Optimum, a leader in the fast-paced world of connectivity, and we're seeking driven and enthusiastic professionals to join our team, empower lives, fuel businesses, and drive innovation. Connectivity is now longer a luxury, but a necessity. A career at Optimum means you'll be enabling progress and enhancing lives by providing reliable, high-speed connectivity solutions that keep the world connected. Our successes, now and in the future, are powered by our amazing product, a commitment to our people and culture, and the connections we make in our communities. If you are resourceful, collaborative, and passionate about delivering consistent excellence, Optimum is for you! We are seeking a Site Reliability Engineer (SRE I) to join our Video Platform Engineering team. In this role, you will support the operation, monitoring, and reliability of large-scale video delivery systems, including live streaming, video-on-demand (VOD), encoding, packaging, and content delivery networks (CDNs). As a Level 1 SRE, you will work closely with senior engineers to respond to incidents, perform routine operational tasks, and build foundational automation skills. This position is ideal for candidates with a background in systems or network administration who are eager to grow into video reliability engineering. • Monitor the health and performance of video services (live, linear, and on-demand) using observability tools., • Support day-to-day operations of video platforms including encoding, transcoding, packaging, origin servers, DRM, and CDN delivery., • Assist in troubleshooting service-impacting issues and escalating to senior engineers when needed., • Participate in on-call rotations under supervision, responding to alerts and contributing to incident resolution., • Execute runbooks for routine operational tasks, deployments, and platform maintenance., • Write and maintain basic automation scripts (Python, Bash, PowerShell) to reduce manual work., • Document incident response steps, troubleshooting guides, and standard operating procedures., • Bachelor's degree in Computer Science, Information Technology, Media Technology, or equivalent practical experience., • 0-2 years of experience in systems administration, IT operations, video engineering, or SRE-related work., • Basic understanding of Linux administration and troubleshooting., • Familiarity with scripting (Python, Bash, or PowerShell)., • Exposure to monitoring/observability tools (Grafana, Prometheus, ELK, Splunk, DataDog, or similar)., • General knowledge of networking fundamentals (TCP/IP, DNS, load balancing, HTTP)., • Awareness of streaming protocols (HLS, MPEG-DASH, RTMP) is a plus. If you have the drive to succeed and are ready to embark on a thrilling career, seize this opportunity today, and join our winning team. Together, we'll shape the future of connectivity. All job descriptions and required skills, qualifications and responsibilities for a particular position are subject to modification by the Company from time to time, in the Company's discretion based on business necessity. We are an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. The Company collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. Applicants for employment with The Company will never be asked to provide money (even if reimbursable) as part of the job application or hiring process. Please review our ___ for further details. Pay is competitive and based on a number of job-related factors, including skills and experience. The starting pay rate/range at time of hire for this position in the posted location is $66,830.00 - $109,793.00 / year. The rate/range provided herein is the anticipated pay at the time of hire and does not reflect future job opportunity. We appreciate your interest in this opportunity. Applicants must be authorized to work for ANY employer in the U.S. Please note that at this time, we do not provide visa sponsorship for employment.

Job Location(s) US-NY-Old Westbury Job ID 2025-4352 Position Type Temporary Staff Type Temporary Part-Time Category Administrative/Clerical New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. New York Tech seeks a Regional Recruiter, part time, to support recruitment for our New York campuses who will execute a national strategic recruitment plan for undergraduate and graduate students. This role is considered a remote position. The regional recruiter will be responsible for meeting enrollment objectives in their designated territories, with a focus on national recruitment. Note, per NYIT remote work policy: to be eligible for fully remote work, the employee's remote work location must be in the states of New York, New Jersey or Arkansas. The Regional Recruiter will support recruitment initiatives occurring during Fall and Spring recruitment cycle, for 30 hours per week and would allow for a stronger presence in key markets that have demonstrated growth. Manage recruitment activity in territories identified in strategic recruitment plan. Participate in college fairs, high school visits, and on-site admissions events within the territories. Provide guidance directors/counselors and college personnel with up-to-date information about New York Tech and its programs. Cultivate relationships with prospective students, their families, school counselors, Community Based Organizations (CBOs) and other key stakeholders, and represent New York Tech within state, local and national professional associations. Key responsibilities would include: Manage 6-10-week (annual) travel schedule that includes both local, regional, and national travel for assigned territories. • Coordinate with Associate Directors to effectively plan and carry out recruitment, in alignment with strategic plan., • Develop broad and deep understanding of New York Institute of Technology's key features, advantages and present information in an effective and compelling way to respective stakeholders, • Build and manage assigned recruitment territory to drive inquiries, applications, deposits and enrollment, • Cultivate relationships with prospective students, high school counselors, administrators, Community Based Organizations (CBO) and other stakeholders through school visits, fairs and other outreach activities to develop deeper understanding of what is driving their enrollment decisions, • Use CRM data to plan travel, track the funnel and execute timely follow-up, • Represent New York Tech professionally at all events; evening/weekend travel are expected, • Provide feedback and recommendations regarding designated territories, • Collaborate and strategize with members of the admissions team to improve recruitment and yield efforts within designated territory, • Provide exceptional customer service to all constituents and perform other duties as assigned by the Associate Director of Admissions., • Bachelor's degree is required; previous admissions experience is preferred., • Must have excellent interpersonal, communication and computer skills., • Must be available to travel and work nights and weekends when necessary. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. USD $25.00/Hr. USD $28.00/Hr.

Job Location(s) US-NY-New York | US-NY-Old Westbury Job ID 2025-4119 Division School of Architecture & Design Position Type Adjunct Type Regular Part-Time Category School of Architecture and Design New York Institute of Technology's six schools and colleges offer undergraduate, graduate, and professional degree programs in in-demand disciplines including computer science, data science, and cybersecurity; biology, health professions, and medicine; architecture and design; engineering; IT and digital technologies; management; and energy and sustainability. A nonprofit, independent, private, and nonsectarian institute of higher education founded in 1955, it welcomes nearly 8,000 students worldwide. The university has campuses in New York City and Long Island, New York; Jonesboro, Arkansas; and Vancouver, British Columbia, as well as programs around the world. More than 112,000 alumni are part of an engaged network of physicians, architects, scientists, engineers, business leaders, digital artists, and healthcare professionals. Together, the university's community of doers, makers, healers, and innovators empowers graduates to change the world, solve 21st-century challenges, and reinvent the future. For more information, visit nyit.edu. The School of Architecture and Design (SoAD) at New York Tech invites applications for part-time Adjunct faculty positions for daytime and evening courses in the Department of Architecture and the Department of Interior Design at the Long Island (Old Westbury, NY) and New York City campuses. The job duties include, but are not limited to: Teaching assigned courses that align with the departmental curriculum and course objectives, including accreditation standards. Developing and refining course materials such as syllabi, lectures, assignments, and exams for the course. Grading student work promptly by evaluating assignments, quizzes, papers, and exams and submitting the results in a timely manner. Providing students with constructive feedback and guidance on their academic progress, including prompt responses to inquiries. Holding regular office hours to support students that are clearly communicated. Maintaining accurate records, including tracking student grades, attendance, and other relevant academic data, and ensuring required documentation is submitted on time to the department. Communicating effectively with department chairs and coordinators about course progress and addressing any emerging issues related to the course or a student. Creating a positive and inclusive learning environment that supports all students. Following university policies, including all institutional rules, regulations, and academic integrity guidelines. Candidates must have a minimum of a Master's degree in a related field to their teaching assignment (e.g. Architecture, Interior Design, Engineering, etc.). Preferred Qualifications: First Professional Degree (B.Arch or M.Arch) PLUS the RA or the PE and prior experience teaching at the college level. Please submit cover letter & CV for consideration. New York Institute of Technology is an Equal Opportunity Employer - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. In compliance with local legislation as well as to provide greater transparency to candidates, the annual base salary range for this position is listed. New York Tech considers factors such as (but not limited to) scope and responsibilities of the position, candidate experience/expertise, education/training, key skills, geographic location, internal peer equity as well as market, organizational considerations and/or applicable collective bargaining agreement when extending an offer. Adjunct Faculty offered hourly rate is contingent on applicable rank. USD $99.00/Hr. USD $108.00/Hr.

Are you looking to Optimize your life? Start your exciting path to a rewarding career today! We are Optimum, a leader in the fast-paced world of connectivity, and we're on the hunt for enthusiastic professionals to join our team! We understand that connectivity isn't just a luxury anymore - it's a necessity that empowers lives, fuels businesses, and drives innovation. A career at Optimum means you'll be enabling progress and enhancing lives by providing reliable, high-speed connectivity solutions that keep the world connected. We owe our success to our amazing product, commitment to our people and the connections we make in every community. If you are resourceful, collaborative, team-oriented and passionate about delivering consistent excellence, Optimum is the Company for you! We areOptimum! The Director of Site Reliability Engineering will be responsible for enhancing and maintaining our private and public cloud infrastructure, and driving the technical direction, innovation, and scalability of our Cloud Platform. The Director, Site Reliability Engineering, will lead a team which is responsible for operating, architecting and building key infrastructure that runs the high availability services that our customers and their businesses depend upon. • Strategic Leadership & Vision: Drive the vision, strategy, and organizational development of the cloud engineering function, championing SRE principles and best practices across the enterprise., • Engineering Excellence & Standards: Define, implement, and enforce robust engineering best practices, architectural guidelines, and operational standards to ensure the delivery of secure, scalable, and highly available solutions., • Technical Authority & Guidance: Provide expert technical leadership and strategic direction for automation, monitoring, performance optimization, and incident management, guiding teams toward resilient and efficient solutions., • High-Performance Team Development: Cultivate and lead highly engaged, high-performance SRE and cloud engineering teams, fostering a collaborative, inclusive, and innovative work environment., • Cross-Functional Collaboration & Knowledge Sharing: Champion a culture of open collaboration, leveraging cross-functional teams, communities of practice, and guilds to share knowledge, define standards, and drive continuous improvement across engineering domains., • Complex Project Delivery: Spearhead the end-to-end delivery of complex, high-visibility infrastructure projects, overseeing design, budgeting, testing, implementation, and continuous performance monitoring., • Resilience & Recovery: Architect, implement, and continuously improve incident response, disaster recovery, and business continuity plans for both cloud and on-premise infrastructure, ensuring rapid recovery and minimal disruption., • Cloud Infrastructure Strategy: Develop and execute a comprehensive cloud strategy focused on maximizing uptime, enhancing security, improving operational efficiency, and significantly reducing downtime., • Operational Excellence & Metrics: Champion a data-driven culture by establishing and monitoring key metrics and analytics to ensure the uptime, security, and efficiency of our cloud infrastructure, driving continuous improvement initiatives. #LI-GW1 • Bachelor's degree in computer science or relevant experience. A master's degree is a plus., • Minimum of 10 years of progressive experience in Engineering or Architecture roles, with a strong focus on large-scale distributed systems., • Minimum of 5 years of experience leading teams and initiatives within cloud infrastructure environments (GCP and AWS experience is highly preferred)., • Minimum of 5 years of experience with on-premise Data Center infrastructure management and modernization., • Deep expertise and practical experience with SRE practices, DevOps principles, and Agile methodologies., • Demonstrated experience in designing, implementing, and maintaining secure and reliable technology delivery systems, including comprehensive disaster recovery planning, SAN, and highly available server/network architectures., • Proven ability to leverage data, analytics, and key operating metrics to inform strategic decision-making and articulate complex technical concepts to diverse audiences., • Exceptional strategic thinking capabilities with a track record of envisioning, articulating, and planning complex deliverables that align with organizational goals and financial objectives., • Strong leadership, mentorship, and talent development skills, with a passion for building and motivating high-performing engineering teams., • Adept at developing, communicating, and embedding best practice procedures across large teams and various functional areas. If you have the drive to succeed and are ready to embark on a thrilling career, seize this opportunity today, and join our winning team, so together, we'll shape the future of connectivity. All job descriptions and required skills, qualifications and responsibilities for a particular position are subject to modification by the Company from time to time, in the Company's discretion based on business necessity. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, national origin, religion, age, disability, sex, sexual orientation, gender identity or protected veteran status, or any other basis protected by applicable federal, state, or local law. The Company provides reasonable accommodations upon request in accordance with applicable requirements. Optimum collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state, and local law. Applicants for employment with the Company will never be asked to provide money (even if reimbursable) as part of the job application or hiring process. Please review our ___ for further details. Pay is competitive and based on a number of job-related factors, including skills and experience. The starting pay rate/range at time of hire for this position in the posted location is$155,509.00-$222,156.00 / year. The rate/range provided herein is the anticipated pay at the time of hire, and does not reflect future job opportunity.

Are you looking to Optimize your life? Start your exciting path to a rewarding career today! We are Optimum, a leader in the fast-paced world of connectivity, and we're on the hunt for enthusiastic professionals to join our team! We understand that connectivity isn't just a luxury anymore - it's a necessity that empowers lives, fuels businesses, and drives innovation. A career at Optimum means you'll be enabling progress and enhancing lives by providing reliable, high-speed connectivity solutions that keep the world connected. We owe our success to our amazing product, commitment to our people and the connections we make in every community. If you are resourceful, collaborative, team-oriented and passionate about delivering consistent excellence, Optimum is the Company for you! We areOptimum! Optimum is a leading provider of Mobile, Broadband (DOCSIS, Fiber) and Video services in the United States. The Product Development organization is responsible for the technology enablement and development of these technologies for our customers along with the tools used by our teams to support them. Reporting to the Engineering Manager, the SDE II DevOps Toolchain will participate as part of a highly skilled software development team to build the tools, processes and automation frameworks that will improve productivity, drive efficiency, and ensure the quality and reliability of our software products.We are looking for a passionate and engaged individual who is willing to take on the challenge of transforming software development at a Fortune 500 company and building the tools that will allow our development teams to Go Fast! • Contribute to our software development tools strategy accelerating our development teams., • Execute on the implementation of our tools roadmap that includes an CI/CD pipeline that will be leveraged by the software development teams across the organization to support our broadband, video, mobile and customer support applications., • Implement tools to identify, document and track software defects. Work closely with the development teams to resolve issues and ensure timely fixes., • Introduce capabilities to do effective A/B testing of releases across test populations., • Lead process improvement initiatives to enhance testing practices, tools, and metrologies., • Implement tools to monitor and report on key quality metrics including defect rates, test coverage and test execution progress. Analyze metrics to identify areas for improvement., • Leverage developer tools and test automation to transform our software release processes and enable the development teams to get capabilities to customers faster., • Use and customize out of the box tools to instrument and monitor systems., • Contribute to a structured knowledge base that allows teams to create, maintain and extend documentation for all our developer tools and processes., • Establish and gain acceptance for Key Results indicated by our development pipeline and automation test frameworks., • Use prototypes and proof of concepts as the primary tool for deep and detailed explorations of architecture and software designs., • Go-to advocate for developer tools in the organization., • Continue to make Optimum a Developer Friendly Environment., • Bachelor's degree in computer science or equivalent, • Minimum 3-5 years of experience in software development, automation, and tools., • Proficiency in variety of programming languages (Python, Java, C#), • Experience with Google cloud or Amazon Web Services and their capabilities., • Thorough understanding of software methodologies and DevOps practices., • Experience with the implementation and optimization CI/CD Pipelines., • Experience with the automation of test cases., • Good intuition for software design, actively looking to learn from other teams and projects., • Experience with data formats and locality with performance considerations., • Demonstrated experience solving performance and data issues by applying experience/knowledge., • Completely comfortable working with live production systems, debugging issues and taking careful actions with protections against damage., • Contributes to establishing and maintaining corporate policies related to technology. If you have the drive to succeed and are ready to embark on a thrilling career, seize this opportunity today, and join our winning team, so together, we'll shape the future of connectivity. All job descriptions and required skills, qualifications and responsibilities for a particular position are subject to modification by the Company from time to time, in the Company's discretion based on business necessity. We are an Equal Opportunity Employer committed to recruiting, hiring and promoting qualified people of all backgrounds regardless of gender, race, color, creed, national origin, religion, age, marital status, pregnancy, physical or mental disability, sexual orientation, gender identity, military or veteran status, or any other basis protected by federal, state, or local law. The Company collects personal information about its applicants for employment that may include personal identifiers, professional or employment related information, photos, education information and/or protected classifications under federal and state law. This information is collected for employment purposes, including identification, work authorization, FCRA-compliant background screening, human resource administration and compliance with federal, state and local law. Applicants for employment with The Company will never be asked to provide money (even if reimbursable) as part of the job application or hiring process. Please review our ___for further details. Pay is competitive and based on a number of job-related factors, including skills and experience. The starting pay rate/range at time of hire for this position in New York is $100,246.00 - $164,689.00 / year. The starting payrate/range at time of hire for this position in Plano, TX is $83,538.00 - $137,241.00 /year. For other locations, please inquire with your recruiter. The rates/ranges provided herein are the anticipated pay at the time of hire, and do not reflect future job opportunity. We appreciate your interest in this opportunity. Applicants must be authorized to work for ANY employer in the U.S. Please note that at this time, we do not provide visa sponsorship for employment.