Veteran engineering and technology jobs in Spokane, WashingtonCreate job alerts

Description Leidos Engineering has an opportunity for a Lead EPC Substation Project Engineer. This position will be part of our unique and fast-growing EPC Solutions group, which sits within our Power Delivery Solutions division that provides consulting services to both public-owned and investor-owned electric utilities. These consulting services provide clients with overall project management tasks in the areas of comprehensive engineering design of electrical transmission and distribution, substation and transmission line projects nationwide. This role has remote working capabilities, but candidates should be located in the Pacific Northwest region of the US in order to be available for client-related travel in the region as needed. As a Lead EPC Substation Project Engineer, you can expect to: • Act as the project technical lead for high voltage substation designs focused on projects utilizing EPC or other progressive contract vehicles that collaborate with construction., • Lead and/or perform Substation Physical Electrical engineering design (including general arrangement, electrical plans and sections, grounding plan and details, raceway plan and details, shielding plan and details, lighting plan, and details, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements., • Lead and/or perform Protection and Control engineering design (including relaying one-lines, AC schematics, DC schematics, metering, SCADA systems, station communications, station automation, station security, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements., • Lead and/or conduct engineering studies and calculations (including bus spans, shielding, lighting, conduit fill, AC/DC loading and system design, etc.)., • Understand and apply industry standards, applicable state and federal safety codes, regulatory compliance requirements, and construction codes to projects., • Create equipment, material, construction, and testing and commissioning specifications., • Perform quality control (QC) reviews and lead QC review meetings on applicable engineering deliverables produced by junior staff, peers, and remote offices on small, medium, and large projects while adhering to the PDS quality management standard., • Provide technical oversight, direction, and support for project teams., • Assure proper documentation of project technical data., • Ensure and facilitate project team collaboration and communication across all disciplines and resolve design conflicts as needed., • Coordinate with project managers to successfully deliver projects to our clients., • Work directly with clients on project-related issues., • Direct and/or participate in client meetings and job-site visits to collect and deliver design and engineering information., • Identify and resolve project-related issues while proactively communicating and collaborating with the client., • Perform evaluations of existing facilities to propose upgrades and replacements and present findings and recommendations to our clients., • Apply value engineering principals for economized, constructible, and safe designs., • Complete conceptual design (one-line and general layout) to support project planning., • Provide professional mentorship while setting and maintaining a positive professional example for the team and junior staff What Sets You Apart (Background Qualifications): • Bachelor’s degree in electrical engineering from an accredited university with eight (8) + years of prior relevant experience in utility substation design/engineering;, • Professional Engineer (PE) License Required, • Ability to Demonstrate advocacy of Quality Assurance and Control in the field of substation engineering., • Comprehensive understanding of the utility grid (power generation, transmission, and distribution) system and the theories and principles involved in substation engineering., • Comprehensive understanding of industry standards (including NEC, NESC, NEMA, IEEE/ANSI) and their application to projects., • Competence in researching engineering and design issues, evaluating alternatives, making sound recommendations, and preparing and presenting recommendations., • Ability to meet deadlines under high-pressure situations., • High level of computer competency/Proficiency with using MS Office applications., • Team player who can work effectively in a team environment with an ability to deal with and lead a variety of individuals from various socio-economic, cultural, and ethnic backgrounds., • Strong written and oral communication skills; Strong organizational skills., • US Citizenship required for access to Leidos' client platforms/systems, • Ability to travel locally/regionally up to 15% of the time You Might Also Have (Preferred Qualifications): • Experience with substation physical and protection and control design., • Experience with engineering programs and software (including SKM, ASPEN, ETAP, CDEGS, or vendor software)., • Experience with serving as firm-client liaison in a support and lead engineering role., • Prior experience as a substation lead engineer performing QC reviews and staff training/mentorship, • Experience leading renewable generation projects or interconnections, • Experience working on EPC projects or similar style of contracts, • Active membership in national engineering societies and work groups (IEEE, PES, etc.), • Construction support experience. At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. PDSPM PDSSUBSTATION If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo — because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 — and moving faster than anyone else dares. March 31, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $107,900.00 - $195,050.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos’ name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system – never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

Job Description Join Our Team at voestalpine Railway Systems Nortrak! Embark on a rewarding career journey with voestalpine Railway Systems Nortrak, North America's premier designer and manufacturer of special trackwork. With a legacy spanning 160 years, we lead the industry in shaping the future of rail solutions. As part of the voestalpine Railway Systems global network, we are committed to delivering quality products and services, including rails, turnouts, fastening systems, signaling technologies, and monitoring solutions. Operating with a presence across Canada, the US, and Mexico, we prioritize the well-being of our people, global mobility, and sustainability and innovation. Our people are the foundation of our success. Skilled, motivated, and results-driven individuals shape our culture demonstrating our core values of Respect, Responsibility, Curiosity, Courage, Passion, and Diversity each day. This commitment is more than shared values; it extends to shared responsibilities for safety and quality, showing genuine care for one another's growth and development, a commitment to our customers, and fostering strong relationships within the Nortrak Team and with our customers. PURPOSE OF POSITION Reporting to the Plant Manager, the Maintenance Technician is responsible for performing preventative maintenance on all equipment products while following standard work methods and practicing safe work habits to ensure production is as efficient and safe as possible. Duties include preventative maintenance and repairs to equipment as needed. This position is concerned a Safety Sensitive Position. Task and Responsibilities: • Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements., • Develop maintenance PM schedule and perform regular preventative maintenance., • Locate sources of problems by observing and listening to mechanical devices in operation., • Cover the plant operations as it relates to manufacturing and shipping., • Ensures all equipment is outfitted for safe operation., • Ensures all equipment is capable of manufacturing quality products efficiently., • Maintain a safe and clean working environment., • Adhere to Nortrak’s Environmental, Safety and Quality Procedures, Practices and Policies., • Model and lead our Nortrak Blue culture and values: (Respect, Responsibility, Curiosity, Courage, Passion, and Diversity)., • High School graduate or GED preferred., • Related degree from a technician college is a plus., • Minimum four years for proven industrial experience., • Ability to read work orders and blueprints preferred., • Certification in electrical, hydraulics, and/or metal fabrication preferred., • Proficient as an industrial electrician and one or more of the core crafts (mechanical, fabrication, hydraulics, mobile equipment repair, HVAC/Boiler Operator, etc.)., • Knowledge of 480 volt 3-phase and industrial controls., • Experience in welding and pneumatic operations is an asset., • Ability to work in a fast-paced environment safely and efficiently., • Must be able to work as a team member collaborating with colleagues., • Frequent standing, walking, stooping, kneeling, crouching, climbing, and pushing, pulling, or lifting objects for the duration of your required schedule shift., • Use hands and arms to operate tools, handle materials, and reach for the duration of your required scheduled shift., • Regularly lift and carry 30–35 pounds; occasionally lift up to 50 pounds., • Required vision abilities include close, distance, color, peripheral vision, depth perception, and focus adjustment., • A supportive, family oriented Nortrak Blue culture., • We provide an environment where Health and Safety is our #1 priority., • Career development opportunities and competitive pay progression., • Competitive medical, dental & vision benefits., • Company paid life and disability insurance., • Paid holidays and vacation., • Retirement plan with matching contributions., • Tuition Assistance Program., • Wellness Program., • Employee Assistance Program., • Employee Recognition Programs. If you think you have the necessary qualifications and drive to excel in our team, we invite you to apply now and join us at voestalpine Railway Systems Nortrak. Apply today! voestalpine Railway Systems Nortrak (“Nortrak”) is a subsidiary of voestalpine AG () one of Europe’s premier steel producers with over 50,000 employees worldwide. Nortrak is closely affiliated with voestalpine’s Railway Systems group which operates in 21 countries across the globe to provide cutting edge system-based solutions to railroads and transits. Our website is voestalpine Railway Systems Nortrak is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected Veteran status, and any other federal, state, or locally protected classifications. INDHP #ZR Company Descriptionvoestalpine Railway Systems Nortrak, with ten production facilities across Canada, US and Mexico, is North America’s leading designer and manufacturer of special trackwork for the railway industry. As the industry’s technology leader, we take pride in providing superior products, excellent customer service and unbeatable engineering design services to our customers. We are committed to bringing innovative solutions, products, and services to our customers across rail freight and transit segments.voestalpine Railway Systems Nortrak, with ten production facilities across Canada, US and Mexico, is North America’s leading designer and manufacturer of special trackwork for the railway industry. As the industry’s technology leader, we take pride in providing superior products, excellent customer service and unbeatable engineering design services to our customers. We are committed to bringing innovative solutions, products, and services to our customers across rail freight and transit segments.

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact Pearce is seeking Experienced HVAC Technicians to join our team for servicing and repairing commercial HVAC equipment on telecom shelters located on Cell Tower sites. This is a fast-paced and rewarding job that is best suited for individuals who are responsible, self-directed, highly motivated, willing to travel, and looking to learn and grow in the Telecom industry. This is a regional position. Candidates should reside in the Spokane, Washington area. Core Responsibilities • Maintaining cooling systems – diagnosing, troubleshooting, repairing, or installing and replacing components of entire systems., • Conducting performance checks and regular maintenance on HVAC equipment., • Performing additional maintenance or upgrades to out-of-season HVAC equipment., • Responding to service calls in a timely manner, including emergency call out services., • Timely and accurate completion of daily work reports. Core Experience • Must be Level 2 or Universal EPA Certified (Required)., • 3+ years of experience with HVAC maintenance (commercial preferred)., • Basic knowledge of electronic, mechanical, and electrical components including refrigeration systems is preferred. At Pearce safety is our number one concern. Candidates must be able to comply with OSHAFCC/FAA/EPA Standards. • Candidates should reside in the Spokane, Washington area., • Must be available for after-hours and weekend call outs on occasion., • Extensive daily travel in an independent work structure., • Occasional overnights required-company pays all travel costs and provides per diem., • Driving to remote work sites as needed., • Be exposed to ambient temperatures while working outdoors., • Lift and move equipment as needed (up to 50 pounds). At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$38 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job DescriptionDescription: Location: Airway Heights, WA Company: Shredfast, Inc. Shift Schedule/ Pay $23.00 - $26.00/ Hourly DOE Monday to Friday — 7:00 AM to 3:30 PM (Full-Time, Non-Exempt) All applicants must pass a pre-employment background check and UA drug test. Job Purpose Shredfast, Inc. is seeking a full-time Mechanical Drafter to support engineering, manufacturing, and fabrication operations for our mobile shredding and collection vehicles. This role is responsible for producing detailed 2D drawings, 3D models, assembly documentation, fabrication packages, BOMs, and change-controlled design updates. Working closely with engineering, production, and fabrication teams, the Mechanical Drafter ensures all designs are accurate, manufacturable, and compliant with company and industry standards. Duties and Responsibilities The Mechanical Drafter will be responsible for performing duties including, but not limited to: CAD Modeling & Drafting • Create detailed 2D mechanical drawings and 3D CAD models for shredding trucks, subassemblies, sheet-metal components, and weldments using AutoCAD and SolidWorks., • Produce detailed fabrication, weldment, and assembly drawings including dimensions, tolerances, GD&T (Geometric Dimensioning and Tolerancing), finishes, and material specifications., • Generate Bill of Materials (BOMs), exploded views, and part identifiers., • Review and interpret blueprints, engineering sketches, proposals, and technical specifications., • Update and revise drawings based on Engineering Change Requests (ECRs) or production feedback., • Collaborate with engineers, fabricators, welders, and assembly technicians to ensure designs are accurate and manufacturable., • Validate that designs meet structural, functional, and cost objectives., • Support prototype builds, troubleshoot design issues, and implement improvements., • Prepare technical documentation packages, cut lists, and build instructions., • Maintain organized digital file structures, models, and design libraries., • Communicate effectively with production, engineering, and management., • Maintain a high level of accuracy, organization, and attention to detail., • Perform other related duties as assigned. Preferred Qualifications • 1–3 years of mechanical drafting or design experience, ideally in manufacturing, metal fabrication, vehicle upfitting, or related industries., • Associate degree or certificate in Mechanical Drafting, CAD Technology, or related field., • Experience supporting fabrication shops or mechanical assembly environments. Employee Benefits • Medical, Dental & Vision Coverage after 60 days, • Premera Blue Cross Blue Shield medical plans, including HSA option, • 401(k) Retirement Plan with company match after 12 months, • Voluntary Benefits: Accident, Critical Illness, Cancer, Hospital, Short Term Disability, Term & Whole Life Insurance, • Family Medical Leave, Paid Time Off, Direct Deposit, • Annual Recognition Awards, Company Achievement Awards, Staff Lunches, Company Sporting Events Veteran Friendly Employer: We value military experience and encourage veteran applicants. Requirements: • Proficiency with SolidWorks; AutoCAD experience required., • Knowledge of mechanical design fundamentals, sheet metal, weldments, and fabrication methods., • Ability to read and interpret mechanical drawings, GD&T, specifications, and technical manuals., • Strong attention to detail, drafting accuracy, and documentation skills., • Ability to manage multiple projects and meet deadlines under supervision., • Strong communication and teamwork skills., • Experience in manufacturing, fabrication, construction, or equipment assembly preferred.

Job DescriptionDescription: The Applied Technologies division at Wagstaff specializes in the engineering and fabrication of stainless steel gloveboxes for the nuclear industry. Our team is growing in this division! Schedule: M-TH 10HRS 3:10 PM- 1:40 AM Pay: $28.00 - $38.22 per hour*, depending on experience *Pay includes shift differential & premium Sign-On Bonus: $2,500.00 *Relocation Assistance *Fabrication Boot Camp As an employee of Wagstaff, you’ll enjoy: Paid non-working holidays Monthly, site-wide BBQs Up to 8% retirement contribution Annual bonus program 1200 Sqft onsite gym, accessible 24/hrs a day Family friendly, company-wide events To review our full benefits summary, please visit Want to learn more about Wagstaff? Join us for a virtual tour! Job Summary Primarily stainless-steel fabrication, straightening, and welding using gas and electric welding equipment. Fabrication of carbon-steel and exotic metals is anticipated. Work is performed in accordance with a Nuclear Quality Assurance program. Primary Job Responsibilities • TIG Welding and MIG Welding, • Perform welding with advanced processes, • Receive instructions, prints, and work orders for the job. Plan details of working procedure, tools, and material requirements., • Adhere to technical documentation, design specifications, and related welding procedure specifications documents, and mentor team members to develop this skill, • Fabrication by cutting, burning, straightening, and welding various metals., • Read, understand, and execute work to Welding Procedure Specifications (WPS) and other pertinent welding documents., • Understand, organize, and perform record keeping tasks such as weld mapping on complex weldments to maintain traceability of materials., • Use calibrated precision measuring instruments, including a Faro Arm, to ensure fabrication tolerances are met., • Identify and recommend product/process improvements, • Documenting work processes and work progress, • Basic MRP system knowledge for daily usage, • In order to achieve business objectives, work weeks in excess of 40 hours may be required, • Complete quality verifications, weld records, and other build records as required, • Other duties as assigned Requirements:, • Demonstrated proficiency with TIG Welding (GTAW) and GMAW (MIG/FCAW), • Minimum of five (5) years welding experience required or demonstrated equivalent experience through passing certification tests, • May substitute two (2) years’ experience for Associate of Arts degree in Welding Technology, • May substitute one (1) year experience for accredited trade or vocational welding certificate, • Minimum requirements shall be in conformance and tested upon interview:, • Test Position: 1G, 2G, 3G, • Joint type: complete joint penetration, • Material: stainless steel, • Processes: TIG and MIG technologies While performing the duties of this job, the employee will be exposed to moving mechanical parts, machinery and equipment, and vibration. The employee may be exposed to fumes or airborne particles and toxic or caustic chemicals. While performing some job duties, there is a risk of electrical shock and other risks associated with a manufacturing environment. Job duties may require work in high, precarious places, work in outside weather conditions, and exposure to extreme temperatures in some cases. The noise level in the working environment is often loud. Because of this environment and associated risks, use of job appropriate personal protective equipment and clothing is required. Employment at Wagstaff is dependent on successfully passing a company-paid drug screening and background check upon hire. Benefits eligibility is subject to the terms and conditions of the applicable policies, plans and programs of Wagstaff. Wagstaff is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, status as a protected veteran, or any other protected category under applicable federal, state, and local laws. PM22

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: Pearce is seeking a detail-oriented and experienced OSP Engineer to support telecommunications infrastructure projects. This role focuses on the design, planning, and implementation of outside plant (OSP) projects involving copper and fiber networks. The ideal candidate will have a strong background in engineering, permitting, and construction coordination, along with the ability to manage budgets and ensure compliance with company and industry standards. Core Responsibilities: Engineering & Design * Design and plan outside plant facilities for copper and fiber infrastructure (aerial, buried, conduit). * Prepare and review engineering drawings, loop loss calculations, and switch serving area designs. * Conduct field measurements for poles, conduits, and buried facilities to support network design. * Develop project budgets, monitor actual costs, and conduct job inspections for quality assurance. Permitting & Compliance * Prepare, organize, and submit permit packages to relevant agencies (Township, County, State, DNR, Railroad, Pipeline, etc.). * Ensure designs meet permitting regulations and engineering standards. Field Coordination * Meet with municipal and government officials to coordinate around road projects (travel required; mileage reimbursed). * Collaborate with other utilities to coordinate relocations, minimize conflicts, and avoid project delays. * Support service orders, subdivision expansions, road relocations, dark fiber MDUs, and more. * Update FROGS (CAD), Varasset, and SiteTracker tools as required. Project & Construction Support * Coordinate with SSP contractors to ensure timely and budget-conscious project completion. * Assist with make-ready work and joint-use coordination for Ziply-owned poles. * Conduct site surveys, support PUC complaint investigations, and create capital projects (e.g., for cell towers or plant repairs). * Address and resolve plant damage requests (DOR/PDR), cable count changes, and other network service needs. Administrative Support * Maintain records, update engineering files, and process departmental documentation. * Draft and type correspondence, reports, and engineering support documents. Core Experience: * 3–5+ years of hands-on experience in copper and fiber optic network engineering. * Minimum 5 years in network engineering or OSP-related work, including permitting and fiber record management. * Strong project management and organizational skills with the ability to handle multiple projects simultaneously. * Proficiency in Ziply engineering tools and systems, including FROGS, Varasset, and SiteTracker. * Skilled in communication and collaboration with municipal officials, utility companies, contractors, and cross-functional teams. * In-depth knowledge of permitting procedures and OSP construction practices. * Willingness to travel locally for fieldwork and meetings (mileage reimbursed). • Preferred candidates located in the Pacific Standard Time (PST) zone. Highly qualified candidates in the Mountain Standard Time (MST) zone may also be considered. At Pearce, we are committed to fair and transparent pay practices. Actual compensation is influenced by a wide array of factors including but not limited to skill set, level of experience, and location. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$36—$38 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job DescriptionDescriptionUnmatched Comp Time Policy: Hours worked over 40 in a week can be reimbursed as additional pay at an equivalent hourly rate or banked as additional PTO. Remote opportunities may be available for the right candidate. At Horrocks, we believe the best work comes from companies with values, that our people are our greatest resource, and that we have a responsibility to the communities where we live and work. As a Senior Bridge Engineer, you will support the engineering design of structures. You will provide top-of-the-industry engineering services that are verified through a rigorous QC process. You will create connections with team members. Your efforts will support in developing client relationships through utilizing cutting-edge technology, innovation, and designing infrastructure that will last. What are the core responsibilities for the role? • Design, evaluate, and analyze highway bridges, • Prepare designs, quantity take-offs, cost estimates, and specifications, • Work in cooperation with bridge staff to deliver PS&E contract documents on time and within the project budget for local agencies, federal agencies, and state DOTs, • Perform bridge designs and load ratings using spreadsheets, finite element software and/or other bridge software, • Experience with the design of multiple bridge types in concrete and steel, wall systems, and minor structures, • Establish and maintain client relationships; ensure client satisfaction; ensure client objectives are met, • Experience with AASHTO LRFD, AISC, ACI, and other North American design codes, • Strong people skills and an ability to work in a multi-disciplinary team environment, • Assist in building a strong regional presence for the firm in transportation and structural engineering, • B.S. degree in Civil Engineering, Masters a plus, • Registered PE, SE required, • 12+ years experience, • Willingness to work on projects locally or in workshare with other offices, some travel required--<10%, • Experience working in bridge design team, • Design Build and Alternative Delivery experience a plus, • Established relationships with local clients (WSDOT/ITD) a plus, • Medical, dental, vision, life, and disability insurance, • Generous paid time off, • 401(k): 50% match of contribution up to 6%, • Professional development opportunities including in-house training Equal Opportunity Employer including disability and protected veteran status #LI-CW1

At MacDonald-Miller Facility Solutions ("MacMiller") we ___. As the Northwest's leading mechanical contracting firm, we design, deliver and service HVAC, plumbing and automation system solutions for commercial buildings. With over 1,600 employees across 13 offices - there is a breadth and variety of work to keep you engaged and inspired. We enjoy a well-respected history of exceeding our customers' expectations and ___. Our clients trust their toughest projects with our integrated teams, including: • New construction - Engineering, fabrication and install of mechanical systems for new projects following lean construction practices, • Special projects - Retrofits and mechanical repairs for existing buildings for new efficiencies, • Service - scheduled preventative maintenance ensuring tenant comfort, and 24/7 emergency response, • Building performance - Control systems, fault detection, energy services and remote monitoring, • ___- Diverse players, one team, a common vision. Collaboration is our foundation and critical to the success of the company. Every team member is valued and brings a diversity of strengths to help us meet our common vision., • ___ - We are dedicated to personal and professional excellence. We execute with distinction by doing the right thing and following through on our commitments., • ___ - Everyone deserves a safe workplace. Safety is more than hardhats and boots, it's an attitude and the environment we create. Every day, everyone goes home to their families., • ___- We are proud to be part of MacDonald-Miller. We actively seek to build relationships and know each other as individuals. Together we create an environment that is welcoming, caring, and trusting., • ___ - We are committed to continuous, ___. Innovation is how we stay an industry leader. We always strive to challenge and better ourselves. We're looking for a Service Technician to perform regular maintenance, filter changes, trouble shooting, diagnostics and repair on commercial package gas and electric, heat pumps, air conditioners, hydronic systems, and associated components. In return for achieving aggressive goals, you'll get rewarded with more to own, a ton of growth opportunities, and more freedom than you've probably ever had. The MacMiller Difference - We know your skills can take you anywhere. Why here? "It is our responsibility to make sure you have the tools, information, and materials you need to do your job. If that isn't happening, we aren't doing our jobs" - Mark Webster, Executive VP/ Chief Operations Officer. Our work is distributed geographically to keep you closer to home, and we invest in tools and training to allow our people to do what they do best. • Cutting edge technology, • Modern tools and equipment, • Full-time training staff, • Commitment to safety and quality - take pride in your craftmanship with a safety-first mentality., • Detailed communication and partnership - work to keep your team and customer informed to build trusting relationships. You should have... • A track record of delivering thorough, quality service in the commercial HVAC industry., • Expertise leveraging your resources to tackle complex repairs., • Someone with a positive/can do attitude, • Having incredibly strong work ethic, • Empowering yourself to learn how to do something. If you need a ton of handholding or a micro-manager boss, this is not the place for you, • Working in a lean, results-oriented environment, where you'll be expected to do more, take on more, and achieve more every year, • Having fun in an environment high on transparency, open to innovative new approaches with a supportive family feel Compensation: $25 - $70 per hour paid in accordance with the union wage scale. Benefits are administered by the Union, check out our full list of ___ for more information. Interested to learn more? If you're ready for an adventure and are interested in being considered for this role, click apply to start the conversation! Or if you know someone who currently works at MacDonald-Miller, reach out to them to get introduced to the team! MacDonald-Miller Facility Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description An ITS Field Service Technician is critical to helping us provide outstanding customer service and technical solutions in a team environment. Under the direction of the Field Service Manager, the Field Service Technician is responsible for installing and repairing Intelligent Transportation Systems (ITS) for various clients throughout the US. Rotating shifts, extensive travel and overtime hours are required. This posting is ideal for someone in the state of Washington. Company vehicle and equipment provided. Responsibilities Customer Service Excellence • Maintain client relations by communicating with and training customers on the use of deployed systems., • Work with people from other areas of the company (ex. Technical Support, Engineering, Sales, Manufacturing, etc.) to resolve any technical, design or functional issues., • Provide unparalleled solutions-based service excellence during all interactions with others, • Provide accurate and detailed record-keeping for service work performed, in Quarterhill's standard format including on-site record and electronic reporting. (a web-based service ticket reporting tool). Technical Solutions • Assist in the installation and integration of new and replacement equipment as required., • Integration of roadside electronics, specialized testing, calibrations, and set-up of various parameters through software menu., • Provide routine maintenance and emergency service work to installed equipment as outlined in the service contracts., • Post-installation drawing and specification reviews for site compliance verifications and corrections may be required. Safety & Quality • Adhere to Corporate safety and quality policies., • Maintain company vehicles to ensure excellent working conditions, cleanliness and adhere to regular maintenance schedule, • Supervision of in-road and roadside civil construction activities., • Supervise subcontractors to ensure installations, repairs and service are performed in accordance with Quarterhill standards. This list of responsibilities might not cover everything you'll end up doing. Qualifications Education & Experience • Degree, Diploma or Certificate in electronics technology and/or equivalent work experience, • Mechanically inclined with the ability to operate basic hand tools such as grinders, drills, meters crimping pliers, screwdrivers, soldering irons, and wrench, • Must possess a valid passport and be able to travel throughout the region, • Have a valid Drivers’ License with a clean driving record, this is a condition of employment, • General knowledge of software and hardware applications with a focus on Linux/Unix & Microsoft Windows-based environment., • Ability to work with Microsoft Office 365 (Excel, Word, Outlook, Teams etc.), • Excellent work record of self-motivation, judgment, productivity, and safety., • Ability to work with minimal supervision in a demanding environment., • Excellent verbal and written communication skills., • Strong customer service skills., • Self-motivated with good organization and time management skills., • Ability to lift 65 lbs., • Work outdoors, in all weather for extended periods of time. Benefits We offer a Total Rewards plan designed with you and your family’s health and wellness in mind that includes: • Paid days off (i.e. vacation, sick days, bereavement leave), • Health and Dental plans, • Retirement plans, • Employee and Family Assistance Program (EFAP), • Employee referral program, • Employee Stock Purchase Program (ESPP) Salary: $57000 - $67000 per year We welcome applicants from all backgrounds, regardless of race, color, religion, sex, veteran status, sexual orientation, gender identity, national origin, age, or disability or any other protected characteristics in accordance with applicable federal, state/provincial, and local laws. We're committed to creating a workplace where everyone feels valued and respected. We appreciate all responses and will acknowledge only those being considered for an interview. We respectfully request no calls or unsolicited resumes from Agencies.

Division: Critical Facilities-Data Centers Project Location(s): Spokane, WA 99201 USA Minimum Years Experience: Travel Involved: 100% Job Type: Regular Job Classification: Experienced Education: Job Family:Environmental Health and Safety Compensation:Salaried Exempt * This position is for a full time traveling assignment supporting an Advanced Technology project, which includes our Data Center, Pharmaceutical, Industrial/Manufacturing, and EV/Battery/Renewables market segment groups (MSG). * Position Description: Partner with Environmental Health & Safety (EH&S) and project teams to enforce site compliance with company, EH&S programs, policies, procedures, and regulatory requirements on a single construction project within business unit's geographic area. Lead training of safe work practices to educate and inform and guide project teams on management of environmental and hazardous materials reports and conditions. Essential Duties & Key Responsibilities: • Lead, direct, and enforce Environmental Health & Safety (EH&S) on single construction project, based on safety staffing requirements as defined by Headquarters (HQ) EH&S policy., • Manage time and resource allocation and provide safety leadership to assigned project., • Assess project Safety practices and known and potential safety related exposures, develop and implement action plans to mitigate risks, and drive changes to improve project team safety awareness and activities., • Communicate requirements for improving performance to project leadership and team for adoption and adherence to changes, using project specific-safety standards, best management practices, and EH&S policies and procedures., • Understand site safety trends and participate in reducing Project Incident Rates by meeting or exceeding established Business Unit (BU) goals and manage regulatory exposures to zero citations., • Develop training for project site-specific needs to educate project management, employees, subcontractors, and Turner Trade employees on Environmental Health & Safety (EH&S) programs, policies, and procedures and provide training on safe work practices to encourage and enforce adoption and adherence., • Promote safe work practices and safe working conditions in accordance with company and Environmental Health & Safety (EH&S) policies, Federal, State, and Local regulations, and owner contractual requirements., • Maintain and enhance working relationships with project staff and subcontractor Safety Representatives., • Develop and enforce project Safety Program and related policies and procedures., • Identify unsafe actions and conditions and engage with project team to implement immediate corrective actions in accordance with Turner, Federal, State and Local regulations and owner requirements., • Develop accountability model for project team to ensure pre-planning for activities and tasks for subcontractors and trades., • Review subcontractor safety programs for completeness and compliance with company and EH&S policies, Federal, State, and Local regulations, and owner contractual requirements., • Review quality of Pre-Task Plans (PTPs) for project subcontractors and Trades based on contractual requirements., • Hold Preconstruction planning meetings with subcontractors to review site safety program and job hazard analysis for their scope of work and to establish and review risk mitigation plans., • Develop safety action items for Preconstruction meetings and verify subcontractors conduct training as per OSHA standards., • Conduct effective worker orientation program for new employees; administer and record participation., • Collaborate with project leadership to create project specific safety reports, assess metrics, and make recommendations for improvement over baseline., • Ensure timely log of subcontractors' toolbox safety meetings., • Conduct and review project team's safety audits, assess recommended corrective actions, and issue reports of violations and/or unsafe practices for immediate resolution., • Other activities, duties, and responsibilities as assigned. #LI-SO2 Qualifications: • Bachelor's Degree from accredited degree program in Occupational Safety & Health, Engineering, or related field of study, and minimum of 4 years of related construction safety experience, or equivalent combination of education, training, and experience, • Construction Health Safety Technician (CHST) certification required or within 2 years of appointment, • Completed OSHA 30-hour training and maintain current First Aid/CPR/BBP and AED certifications, • Knowledgeable of Federal, State, and local Environmental Health & Safety regulations, • Working knowledge and consistent application of safety and environmental principles and techniques, • Ability to identify known and potential safety related exposures and lead implementation of corrective actions, • Familiar with general construction operations, • Demonstrate elements of leadership from within, teamwork, and interpersonal skills to build teams and professional relationships, • Professional verbal and written communication skills and effective presentation delivery skills, • Exceptional organizational skills with high attention to detail, • Analytical thinking, good judgment, and complex problem-solving skills, • Travel required, access to reliable transportation required Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Performance of the required duties require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. While performing the duties of this job, the employee is frequently required to sit, climb, balance, stoop, kneel, crouch, crawl, use hands to finger, handle or feel objects, tools, or controls, and reach with hands, talk, and hear. The employee frequently views a computer monitor and frequently uses a computer keyboard. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is regularly required to be mobile, and the employee occasionally travels both short and long distances via a variety of conveyances. The employee must regularly lift and/or move up to 15 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works at construction work sites where the employee is exposed to moving mechanical parts, high precarious places, fumes, or airborne particles, outside weather conditions, and risk of electrical shock. The noise in the work environment is usually moderate to loud. While performing the duties of this job, the employee occasionally works in an office setting. The noise in the work environment is usually quiet to moderate in an office setting. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Description Leidos Engineering has an opportunity for a Lead EPC Substation Project Engineer. This position will be part of our unique and fast-growing EPC Solutions group, which sits within our Power Delivery Solutions division that provides consulting services to both public-owned and investor-owned electric utilities. These consulting services provide clients with overall project management tasks in the areas of comprehensive engineering design of electrical transmission and distribution, substation and transmission line projects nationwide. As a Lead EPC Substation Project Engineer, you can expect to: • Act as the project technical lead for high voltage substation designs focused on projects utilizing EPC or other progressive contract vehicles that collaborate with construction., • Lead and/or perform Substation Physical Electrical engineering design (including general arrangement, electrical plans and sections, grounding plan and details, raceway plan and details, shielding plan and details, lighting plan, and details, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements., • Lead and/or perform Protection and Control engineering design (including relaying one-lines, AC schematics, DC schematics, metering, SCADA systems, station communications, station automation, station security, etc.) at HV and EHV voltage levels while adhering to prevailing standards, practices, procedures, and project/program requirements., • Lead and/or conduct engineering studies and calculations (including bus spans, shielding, lighting, conduit fill, AC/DC loading and system design, etc.)., • Understand and apply industry standards, applicable state and federal safety codes, regulatory compliance requirements, and construction codes to projects., • Create equipment, material, construction, and testing and commissioning specifications., • Perform quality control (QC) reviews and lead QC review meetings on applicable engineering deliverables produced by junior staff, peers, and remote offices on small, medium, and large projects while adhering to the PDS quality management standard., • Provide technical oversight, direction, and support for project teams., • Assure proper documentation of project technical data., • Ensure and facilitate project team collaboration and communication across all disciplines and resolve design conflicts as needed., • Coordinate with project managers to successfully deliver projects to our clients., • Work directly with clients on project-related issues., • Direct and/or participate in client meetings and job-site visits to collect and deliver design and engineering information., • Identify and resolve project-related issues while proactively communicating and collaborating with the client., • Perform evaluations of existing facilities to propose upgrades and replacements and present findings and recommendations to our clients., • Apply value engineering principals for economized, constructible, and safe designs., • Complete conceptual design (one-line and general layout) to support project planning., • Provide professional mentorship while setting and maintaining a positive professional example for the team and junior staff What Sets You Apart (Background Qualifications): • Bachelor's degree in electrical engineering from an accredited university with eight (8) + years of prior relevant experience in utility substation design/engineering;, • Professional Engineer (PE) License Required, • Ability to Demonstrate advocacy of Quality Assurance and Control in the field of substation engineering., • Comprehensive understanding of the utility grid (power generation, transmission, and distribution) system and the theories and principles involved in substation engineering., • Comprehensive understanding of industry standards (including NEC, NESC, NEMA, IEEE/ANSI) and their application to projects., • Competence in researching engineering and design issues, evaluating alternatives, making sound recommendations, and preparing and presenting recommendations., • Ability to meet deadlines under high-pressure situations., • High level of computer competency/Proficiency with using MS Office applications., • Team player who can work effectively in a team environment with an ability to deal with and lead a variety of individuals from various socio-economic, cultural, and ethnic backgrounds., • Strong written and oral communication skills; Strong organizational skills., • Ability to travel locally/regionally up to 15% of the time You Might Also Have (Preferred Qualifications): • Experience with substation physical and protection and control design., • Experience with engineering programs and software (including SKM, ASPEN, ETAP, CDEGS, or vendor software)., • Experience with serving as firm-client liaison in a support and lead engineering role., • Prior experience as a substation lead engineer performing QC reviews and staff training/mentorship, • Experience leading renewable generation projects or interconnections, • Experience working on EPC projects or similar style of contracts, • Active membership in national engineering societies and work groups (IEEE, PES, etc.), • Construction support experience. At Leidos, we pride ourselves on being a trusted and technology-focused solutions provider. Our Power Delivery Services Team is the go-to for utilities and mobile operators who need reliable power and telecommunication expertise. We've worked with over 50 investor-owned utilities, over 160 municipals/cooperatives, and we're continuing to expand our reach. Plus, we've got an amazing group of industry-leading construction partners who help us deliver meaningful Energy Delivery Solutions. Our recognition as an industry leader has been confirmed time and time again. Engineering News-Record (ENR) has ranked Leidos among the Top 10 T&D Firms and Top 10 Power Firms. PDSPM PDSSUBSTATION If you're looking for comfort, keep scrolling. At Leidos, we outthink, outbuild, and outpace the status quo - because the mission demands it. We're not hiring followers. We're recruiting the ones who disrupt, provoke, and refuse to fail. Step 10 is ancient history. We're already at step 30 - and moving faster than anyone else dares. March 23, 2026 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range $107,900.00 - $195,050.00 The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law. About Leidos Leidos is an industry and technology leader serving government and commercial customers with smarter, more efficient digital and mission innovations. Headquartered in Reston, Virginia, with 47,000 global employees, Leidos reported annual revenues of approximately $16.7 billion for the fiscal year ended January 3, 2025. For more information, visit ___. Pay and Benefits Pay and benefits are fundamental to any career decision. That's why we craft compensation packages that reflect the importance of the work we do for our customers. Employment benefits include competitive compensation, Health and Wellness programs, Income Protection, Paid Leave and Retirement. More details are available at ___. Securing Your Data Beware of fake employment opportunities using Leidos' name. Leidos will never ask you to provide payment-related information during any part of the employment application process (i.e., ask you for money), nor will Leidos ever advance money as part of the hiring process (i.e., send you a check or money order before doing any work). Further, Leidos will only communicate with you through emails that are generated by the Leidos.com automated system - never from free commercial services (e.g., Gmail, Yahoo, Hotmail) or via WhatsApp, Telegram, etc. If you received an email purporting to be from Leidos that asks for payment-related information or any other personal information (e.g., about you or your previous employer), and you are concerned about its legitimacy, please make us aware immediately by emailing us at ___. If you believe you are the victim of a scam, contact your local law enforcement and report the incident to the ___. Commitment to Non-Discrimination All qualified applicants will receive consideration for employment without regard to sex, race, ethnicity, age, national origin, citizenship, religion, physical or mental disability, medical condition, genetic information, pregnancy, family structure, marital status, ancestry, domestic partner status, sexual orientation, gender identity or expression, veteran or military status, or any other basis prohibited by law. Leidos will also consider for employment qualified applicants with criminal histories consistent with relevant laws. #Remote

As the global leader in high-speed connectivity, Ciena is committed to a people-first approach. Our teams enjoy a culture focused on prioritizing a flexible work environment that empowers individual growth, well-being, and belonging. We're a technology company that leads with our humanity-driving our business priorities alongside meaningful social, community, and societal impact. As the global leader in high-speed connectivity, Ciena is committed to a people-first approach. Our teams enjoy a culture focused on prioritizing a flexible work environment that empowers individual growth, well-being, and belonging. We're a technology company that leads with our humanity-driving our business priorities alongside meaningful social, community, and societal impact. We are seeking a Field Applications Engineer(FAE) to join the Data Center PON Solutions product team. The FAE will ensure the successful introduction and adoption of our next-generation Data Center Out-of-Band Management solution targeted at hyperscalers. This role sits at the intersection of customer architecture and engineering, Ciena R&D, and product management. You will be working in Ciena and customer labs to validate and integrate our platform, feeding critical insights back to R&D, and guiding the product team to deliver a solution that precisely meets the most demanding hyperscaler requirements. This is a hands-on technical role where success is measured by the speed and quality of customer acceptance, smooth integration into their infrastructure, and the ability to influence product direction with real-world feedback. How You Will Contribute: • Hands-on testing and integration of Data Center Out-of-Band Management solutions in Ciena's lab facilities and in hyperscaler customer environments., • Troubleshoot technical issues in real-time and provide strategic guidance to clients., • Document deployment architectures, operational procedures, and best practices., • Responsible for internal Project Management of key technical tasks and deliverables to align with customer-driven evaluation and integration schedules, • Configure, validate, and troubleshoot the end-to-end DCOM solution in customer environments., • Translate customer requirements and observations into actionable feedback for Ciena R&D and product management., • Provide input into roadmap decisions, feature prioritization, and usability improvements., • Validate automated SDN provisioning solutions in hyperscaler DCOM environments., • Measure operational performance under real-world workloads., • Train internal FAEs, account teams, and customer operations teams on the new platform., • Ensure compliance with customer-specific lab and production certification standards. The Must Haves: Technical Expertise • Engineering degree or equivalent experience., • 5+ Experience in Field Application Engineering or similar roles (customer-facing with deep technical integration)., • Hands-on experience with hyperscaler or broadband service provider networks., • Familiarity with OMCI Provisioning of PON FTTx solutions, • Knowledge of hyperscaler network operations, test methodologies, and tooling., • Experience relative to the design and architecture of embedded Linux systems including docker containers, Linux kernel, TCP/IP stack, Forwarding Tables, VLANs, • Experience working with UNIX/Linux/RHEL/Ubuntu and/or any other server OS, be it on bare metal and/or Virtual Machine, and system admin functions., • Familiarity with open networking or cloud-native networking projects (OpenConfig, gNMI/gNOI/g*, SONiC, etc.)., • Ability to act as a liaison between customer engineering teams and internal R&D., • Excellent communication and client-facing skills, conveying technical issues precisely and accurately., • Comfortable balancing short-term customer demands with long-term product goals., • Ability to travel as needed to support client engagements., • Experience working with strategic account environments. The annual pay range for this position in California is $151,500 - $242,100 USD #LI-WH1 #LI-Remote Pay ranges at Ciena are designed to accommodate variations in knowledge, skills, experience, market conditions, and locations, reflecting our diverse products, industries, and lines of business. Please note that the pay range information provided in this posting pertains specifically to the primary location, which is the top location listed in case multiple locations are available. Non-Sales employees may be eligible for a discretionary incentive bonus, while Sales employees may be eligible for a sales commission. In addition to competitive compensation, Ciena offers a comprehensive benefits package, including medical, dental, and vision plans, participation in 401(K) (USA) & DCPP (Canada) with company matching, Employee Stock Purchase Program (ESPP), Employee Assistance Program (EAP), company-paid holidays, paid sick leave, and vacation time. We also comply with all applicable laws regarding Paid Family Leave and other leaves of absence. Not ready to apply? Join our___to get relevant job alerts straight to your inbox. At Ciena, we are committed to building and fostering an environment in which our employees feel respected, valued, and heard. Ciena values the diversity of its workforce and respects its employees as individuals. We do not tolerate any form of discrimination. Ciena is anEqual Opportunity Employer, including disability and protected veteran status. If contacted in relation to a job opportunity, please advise Ciena of any accommodation measures you may require.

Division: Critical Facilities-Data Centers Project Location(s): Ashburn, VA 20146 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt * This individual will work exclusively for Turner's Advanced Technology Group, which includes our Data Center, Pharmaceutical, Industrial/Manufacturing, and EV/Battery/Renewables market segment groups (MSG). This position can be performed remotely from any location in the United States. * Position Description: Manage and oversee on-site security operations and team. Develop and implement security procedures to keep company, executives, employees, workers, visitors, guests, and assets safe. Essential Duties & Key Responsibilities: • Accountable for Preconstruction deliverables, including but not limited to, Guaranteed Maximum Price (GMP) and Lump Sum bids., • Collaborate with Operations on Project Schedule, Logistics, Safety, Constructability Reviews, General Conditions and General Requirements., • Develop, review and approve Assumptions and Clarifications., • Develop and maintain relationships with clients, architects, design community, and trade partners to enhance future business development opportunities., • Collaborate with Procurement regarding Preconstruction estimates., • Participate in hiring process, onboard and deliver timely performance feedback for direct reports, execute/contribute to performance appraisals during annual performance cycle, utilize talent management systems, and identify appropriate training to help with development needs., • Develop and monitor Preconstruction budget for project, with focus on Preconstruction recoveries, including invoicing, and provide monthly financial updates or as requested., • Lead review meetings with owner, architect, and engineer related to Preconstruction phase., • Prepare comparison analysis to previous estimates and develop clear and concise messages to explain variances for each project stakeholder., • Establish Preconstruction Quality Control (QC) processes for scope and estimate reviews., • In collaboration with Operations, identify opportunities to drive improvement within preconstruction process by using Virtual Design and Construction (VDC), Integrated Project Delivery (IPD) and other process enhancements., • Coordinate with Operations Lead to support Launch Matrix preparation, scheduling, evaluating, executing, and managing meetings for each estimate milestone., • Participate and contribute to Constructability Reviews for milestone estimates per Launch Matrix., • Coordinate with Lean Manager to develop and execute Pull Plans for design, estimate and GMP schedules., • Generate, coordinate and manage Budget Control Reports (BCRs) between each milestone estimate to manage cost events and value engineering opportunities. Provide variance reports for each milestone estimate to communicate scope development., • Lead Target Value Design process as appropriate for select projects., • Other activities, duties, and responsibilities as assigned. #LI-SO2 Qualifications: • Bachelor's Degree from accredited degree program in Engineering, Architecture, Construction Management, or related field, and minimum of 10 years of Building Construction experience required, or equivalent combination of education, training, and experience, • Experience with variety of building construction types desired, • Thorough understanding of drawings and specifications, general contract and subcontract documents, materials, means and methods, • Thorough knowledge of construction cost, scheduling, estimating, purchasing and engineering principles and techniques, and accounting principles, • Ability to develop client relationships, identify sales opportunities and collaborate on solutions to secure work, • Extensive knowledge of regional market, competition, and industry trends, • Ability to provide accurate qualitative and quantitative analysis of estimating documents, • Advanced project management skills, able to manage high volumes of work and ability to move projects forward in a complex environment in a timely manner, • Management experience required, and coach and mentor others, • Negotiation skills with ability influence and engage others, • Executive level presentation skills, anticipates needs of audience, and tailors communications appropriately, • Pursues everything with energy, drive and sees initiatives through to completion, • Process and critical thinking skills with sound judgement decision-making, • Ability to leverage lean concepts and continuous improvement methods and tools Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, use hands to finger, handle, or feel objects, tools, or controls; and reach with hands, talk, and hear. The employee frequently views a computer monitor and frequently uses a computer keyboard. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is occasionally required to be mobile, and the employee occasionally travels both short and long distances via a variety of conveyances. The employee occasionally performs work on-site at construction work sites, office locations, and/or off-site venues. The employee must regularly lift and/or move up to 20 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works in an office setting. The noise in the work environment is usually quiet to moderate in an office setting. While performing the duties of this job, the employee may occasionally work at construction work sites where the employee is exposed to moving mechanical parts, high precarious places, fumes or airborne particles, outside weather conditions, and risk of electrical shock. The noise in the work environment is usually moderate to loud. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Division: Critical Facilities-Data Centers Project Location(s): Spokane, WA 99201 USA Minimum Years Experience: Travel Involved: 100% Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt * This position is for a full time traveling assignment supporting an Advanced Technology project, which includes our Data Center, Pharmaceutical, Industrial/Manufacturing, and EV/Battery/Renewables market segment groups (MSG). * Position Description: Manage and supervise at a project level all engineering and administrative policies, procedures and functions. Coordinate with project field operations to ensure transfer of information is delivered, understood and implemented. Reports to: Project Manager, Senior Project Manager or Project Executive Essential Duties & Responsibilities*: • Develop a comprehensive working knowledge and understanding of the contract documents (including Turner's contract, plans, specifications and applicable codes)., • Lead, supervise and develop all Turner engineering staff, including providing input on or completing performance appraisals., • Ensure strict adherence to safety, ethics and compliance requirements at all times., • Overall responsibility for communication of information amongst all project team members., • Establish and maintain procedures with the design professionals, consultants, owner and subcontractors for information flow, approvals, meetings, reporting, applications for payment, etc., • Work with Preconstruction, Estimating and Purchasing in development of Guaranteed Maximum Price (GMP) or initial project budget. Lead the preconstruction effort as it relates to Project Engineering and the specific project needs., • Conduct thorough construction document reviews and examine all documents for constructability and Quality Assurance/Quality Control (QA/QC). Bring all concerns to the attention of the appropriate design professional for resolution., • Participate in preparation of various studies, recommendations for materials and methods, and cost estimates., • Prepare a detailed contract items list including all significant items required for the construction of the project. Develop trade scope of work documents for bid packages, major material and equipment purchases., • Prepare a procurement schedule for subcontractors, major material and equipment purchases to ensure timely buy-outs and overall compliance with the construction schedule is maintained., • Responsible for managing financial status of the project including preparation of project status and accuracy of financial reports., • Schedule, conduct, and document all job meetings, owner-architect and coordination meetings., • Manage the subcontract change order process including review of subcontractor estimates, negotiate change orders, obtain required owner approvals and preparation of subcontract change orders., • Manage project close-out, including securing warranties, guarantees, and acceptance of work, subcontract and vendor close, final payment and records retention. #LI-SO2 Qualifications: Bachelor's Degree plus minimum of eight years' related experience or an equivalent combination of education, training and/or experience. Knowledge of accounting principles and cost control procedures. Knowledge of estimating, construction costs, scheduling, purchasing, and engineering principles and techniques, various building systems. Strong computer skills and a familiarity with Microsoft Office Suite of programs. Knowledge of Turner's Project Management and scheduling software desirable. Ability to implement leading-edge technologies such as Building Information Models (BIM) and Lean to benefit the project. Demonstrated ability to thoroughly understand drawings and specifications, general contract and subcontract documents, materials, means and methods. Very strong oral and written communication skills required. Demonstrated leadership and interpersonal skills. Physical Demands: Performance of the required duties will require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear, stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 50 pounds. Work Environment: While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in these work environments is usually moderate to very loud. *May perform other duties as assigned. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Division: Critical Facilities-Data Centers Project Location(s): Ashburn, VA 20146 USA Minimum Years Experience: Travel Involved: Job Type: Regular Job Classification: Experienced Education: Job Family:Construction Compensation:Salaried Exempt * This individual will work exclusively for Turner's Advanced Technology Group, which includes our Data Center, Pharmaceutical, Industrial/Manufacturing, and EV/Battery/Renewables market segment groups (MSG). This position can be performed remotely from any location in the United States. * Position Description: Prepare detailed estimates for the project based on the design documents, narratives, and specifications, focusing on the Mechanical/Plumbing/Fire Protection trades. Reports to: Preconstruction Manager / MEP Manager Essential Duties & Responsibilities*: Specifically relating to the mechanical systems: • Lead mechanical estimating responsibility for complex projects such as Mission Critical, Market Segment, and Government jobs with MEP package contract value of $25M+., • Communicate estimate and scopes of work to stakeholders (e.g., Turner staff, architects, engineers, and owners)., • Prepare quantity take-offs, analysis, estimates, and studies for Mechanical, Plumbing, and Fire Protection items incorporated in scope from conceptual design through completed construction documents. Preliminary design work may be required to complete conceptual estimates., • Analyze existing site conditions and contract documents (e.g., plans, specifications) to determine required scope not already indicated., • Establish working relationships with local material suppliers and equipment vendors to solicit accurate and current pricing of plumbing fixtures, HVAC equipment, piping and sheet metal material, and miscellaneous material pricing., • Develop working relationships with local Mechanical, Plumbing, and Fire Protection trade partners to maintain active list of qualified bidders for projects., • Perform constructability analysis of project documents. Communicate design and constructability issues to project team and stakeholders per the project contract., • Provide first costs analysis and participate in life cycle analysis with Design team., • Participate in decision making process with Operations and Procurement to determine MEP trade partners to utilize in project pursuits., • Lead company-wide or regional MEP strategic initiatives and/or special projects., • Contribute subject matter expertise of Mechanical, Plumbing, and Fire Protection system for project pursuits., • Participate in development and implementation of MEP training., • Lead integration of MEP Operations staff during MEP PreCon process and serve as resource to guide and consult with staff through to construction. Review general conditions and general requirements items to properly address in estimate including, but not limited to, items such as temporary heating/cooling, including estimating of natural gas consumption during construction., • Coordinate equipment pricing with SourceBlue for Mechanical, Plumbing, and Fire Protection estimates., • Conduct value analysis to define cost efficient alternatives to proposed Mechanical, Plumbing, and Fire Protection systems, materials, and equipment., • Serve as liaison with Engineers, Design consultants, Trade partners, other Turner staff, and Owner's representatives to resolve Mechanical, Plumbing, and Fire Protection issues related to project preconstruction efforts., • Prepare estimates and proposals for contract types (e.g., lump sum, GMP, Cost Plus)., • Participate in estimate reviews with Design team and client., • Participate in project hand-off to Operations to ensure proper transfer of knowledge from Preconstruction to operations., • Participate in authoring scope requisitions for bidding/procurement of Mechanical, Plumbing, and Fire Protection systems; coordinate with fellow estimators to eliminate scope gaps and overlaps., • Evaluate of trade partner proposals relative to their scope of work and determine scope coverage and manage identified scope gap risks., • Assist project staff to evaluate large change orders. #LI-SO2 Qualifications: • Bachelor's Degree in Engineering, Architecture, Construction Management or related field, and minimum of 8 years of related Mechanical, Plumbing, and Fire Protection systems estimating experience or equivalent combination of education, training, or experience, • Extensive knowledge of Mechanical, Plumbing, and Fire Protection systems, • Formulate advanced scenarios to address known and unknown scope relative to comprehensive cost analysis for Mechanical, Plumbing, and Fire Protection systems, based on contract documents, drawings, specifications, scopes of work and project schedule, • Leverage relationships with vendors, trade partners, and project team members to elevate client service, • Excellent project management skills with ability to multitask and prioritize competing demands in deadline-driven environment, • Professional written and verbal communication skills to deliver presentations with confidence, • Proficient computer skills and Microsoft Office suite of applications, • Supervisory experience desired, able to delegate, coordinate work of others, monitor performance, and deliver feedback Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to sit, use hands to finger, handle, or feel objects, tools, or controls; and reach with hands, talk, and hear. The employee frequently views a computer monitor and frequently uses a computer keyboard. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. The employee is regularly required to be mobile, and the employee occasionally travels both short and long distances via a variety of conveyances. The employee occasionally performs work on-site at construction work sites, office locations, and/or off-site venues. The employee must regularly lift and/or move up to 15 pounds and occasionally lift and/or move up to 50 pounds. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee regularly works in an office or remote setting. The noise in the work environment is usually quiet to moderate in an office setting. While performing the duties of this job, the employee may occasionally work at construction work sites where the employee is exposed to moving mechanical parts, high precarious places, fumes or airborne particles, outside weather conditions, and risk of electrical shock. The noise in the work environment is usually moderate to loud. The employee is required to work in compliance with company safety policies, procedures, and applicable laws. *May perform other duties as assigned. Where applicable, all activities will include disabled and veterans' organizations. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law. Apply NowShare Save Job

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: Are you a skilled and highly motivated Generator Technician who is looking to learn and grow in a fast-paced, challenging job in the Telecom industry? If so, Pearce has a career for you! Our Generator Technicians service and repair commercial generators on cell phone towers in your region. This role is a great match for independent, self-starters who are willing to travel. Core Responsibilities: • Maintaining generators, diagnosing and repairing problems, installing and replacing components or entire systems, and performing additional maintenance or upgrades on out-of-season equipment, • Conducting performance checks and regular maintenance on generators to ensure proper readiness, reading and following blueprints or other design specifications to install or repair, • Install fuel and water supply lines, pumps, electrical wiring and controls, and other components, and test for proper operation, • Be responsible for responding promptly/timely to Power/Generator alarms; have the ability to be on call 24/7 if necessary and respond promptly in answering assigned phone and email Core Experience: • Two or more years of experience with generator maintenance is preferred and a minimum of one year of intense work-related experience with generator and electrical maintenance-related software, hardware, and processes, • Thorough knowledge of generator installations, maintenance, and repair of Generators; knowledge of electronic, mechanical, and electrical components; moderate computer skills At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • This position requires lifting over 50 pounds, stooping, bending, kneeling, squatting, climbing, and standing for long periods of time, • Must have the ability to inspect and/or troubleshoot equipment/alarms effectively, both visually and audibly, • Must be willing and able to drive long distances, workday, evening, or night hours; overtime, emergency callouts, weekends, and holidays as required; must assume 24-hour on-call duty when assigned and be gone from home for extended periods of time In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$30—$40 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !

Job Description At PEARCE, we've got a career for you! Pearce is a leading technology-enabled provider of asset management solutions for mission-critical electromechanical infrastructure throughout North America. Pearce provides technical maintenance, repair, operations, and engineering services for uninterruptible power supply (UPS) systems, backup power generators, battery energy storage systems (BESS), critical cooling systems, and other electrical and mechanical infrastructure across end markets such as renewable energy, telecom, and data centers. Founded in 1998, Pearce has more than 4,000 employees and 28 locations across the U.S. Pearce is a wholly owned subsidiary of CBRE Group, Inc., the world's largest commercial real estate services and investment firm. To learn more about Pearce visit . Your Impact: Pearce Services is seeking skilled and motivated entry level technicians to join our team in servicing and repairing commercial generators and HVAC equipment on cell tower and telecom sites. We offer industry-leading training, competitive compensation, and opportunities for career growth in a fast-paced, essential industry. These roles are ideal for independent, self-driven professionals who thrive in hands-on environments, enjoy troubleshooting complex power and HVAC systems, and are eager to learn and grow in the Telecom industry. Candidates should be responsible, highly motivated, willing to travel, and reside in the Spokane, Washington area for these local positions. Responsibilities: • Service, maintain, and repair generators, and HVAC systems at telecom and cell tower sites., • Maintain commercial package cooling systems supporting telecom equipment shelters., • Conduct preventative maintenance, inspections, load-bank testing, and performance checks., • Perform basic generator repairs, oil changes, lubrication, and fuel system maintenance., • 1+ year generator and/or HVAC service experience (technical school accepted) preferred but not required., • Preferred experience with ATS, electrical troubleshooting, and critical power systems., • EPA Universal or Type II Certification preferred: EGSA a plus., • Knowledge of FCC, FAA, EPA, OSHA standards. At Pearce safety is our number one concern. Candidates must be able to comply with OSHA Standards. • Lift 50+ lbs.; climb, bend, kneel, and stand for extended periods., • Extensive travel to telecom sites; independent field work., • Willing to work nights, weekends, holidays, and on-call rotations., • Must be able to meet the requirements of a DOT driver including physical, background and driving record. In addition to wages, employees may also be eligible for performance and referral bonuses, production incentives, tool/equipment and fuel stipends, company vehicle, per diem or other applicable compensation. We also offer all full-time employees a comprehensive benefits package including health and life insurance, 401k with employer match, paid time off, tuition reimbursement, and professional development courses. This pay range reflects our commitment to pay equity and compliance with state and federal pay transparency laws. If you have questions about compensation, we encourage open discussions during the hiring process. Base Pay Range$28—$38 USD What We Offer Pearce offers a family-friendly and innovative culture with opportunities for growth, competitive compensation, comprehensive health benefits including medical, dental and vision insurance, flexible spending accounts, HSA option. To help you recharge, we have paid vacation and paid holidays. For your future, we offer a company-matching 401(k) Retirement, Life Insurance, Tuition reimbursement, and professional development training. To help you be successful at work, as required for the role, we will provide a company vehicle, phone, laptop, or tablet along with all necessary tools and safety equipment. We are an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate based on race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law. Learn more about us at !