Welder jobs in Spokane, WashingtonCreate job alerts

Job Summary: We are looking for skilled Welders and/or Fitters (knowledge of both is a plus) to cut and join metals and other materials at our Spokane, WA facility. Essential Job Functions 1. Perform FCAW (2G) welding. Be able to pass 2G test in FCAW on 1" thick coupon., 2. Operate air arc to remove steel (back gouging)., 3. Grind with 90° angle grinder., 4. Read weld symbols and check weld size using weld fillet gauges., 6. Set machines according to procedure charts., 7. Use air chipper to chip of slag., 8. Use natural gas propane heaters to pre-heat steel., 9. Operate stud welder., 10. Follow weld procedures as it applies to volts, amps & wire feed speed., 11. Heat, straighten and be able to know when to use pre-heat to offset distortion., 12. Perform other duties as required by management. Shift Times: Monday-Thursday: 5:00am-3:30pm Friday: 5:00am-1:30pm Qualifications and Requirements Required: Must be able to lift a minimum of 50 lbs. over shoulder height. Be able to read blueprints. FCAW (2G). Be able to read weld symbols and be familiar with weld procedures. Must be familiar with WP1 (manual shielded metal arc welding of carbon steel) and WP2 (Flux cored are welding of carbon steel) and WP3 (Flux cored arc welding with gas shielding of carbon steel). Preferred: Two or more years' experience in manufacturing in the steel fabrication industry. Proficiency and use of Software, equipment, machines, tools, electronic device necessary for job: Air arc, 90° angle grinder, crane, heating torch, cutting torch.

Job Summary: We are looking for skilled Welders and/or Fitters (knowledge of both is a plus) to cut and join metals and other materials at our Spokane, WA facility. Essential Job Functions 1. Perform FCAW (2G) welding. Be able to pass 2G test in FCAW on 1" thick coupon., 2. Operate air arc to remove steel (back gouging)., 3. Grind with 90° angle grinder., 4. Read weld symbols and check weld size using weld fillet gauges., 6. Set machines according to procedure charts., 7. Use air chipper to chip of slag., 8. Use natural gas propane heaters to pre-heat steel., 9. Operate stud welder., 10. Follow weld procedures as it applies to volts, amps & wire feed speed., 11. Heat, straighten and be able to know when to use pre-heat to offset distortion., 12. Perform other duties as required by management. Shift Times: Monday-Thursday: 5:00am-3:30pm Friday: 5:00am-1:30pm Qualifications and Requirements Required: Must be able to lift a minimum of 50 lbs. over shoulder height. Be able to read blueprints. FCAW (2G). Be able to read weld symbols and be familiar with weld procedures. Must be familiar with WP1 (manual shielded metal arc welding of carbon steel) and WP2 (Flux cored are welding of carbon steel) and WP3 (Flux cored arc welding with gas shielding of carbon steel). Preferred: Two or more years' experience in manufacturing in the steel fabrication industry. Proficiency and use of Software, equipment, machines, tools, electronic device necessary for job: Air arc, 90° angle grinder, crane, heating torch, cutting torch.

Job Description Job Title: Welder - Day Shift Job Description • Join a dynamic job shop that specializes in producing metal parts for a diverse range of industries., • Read and interpret blueprints to guide welding and fabrication tasks., • Perform MIG welding in all positions with a focus on precision and quality., • Handle and process materials as necessary during fabrication., • Proficiency in MIG welding techniques., • Ability to read and interpret technical blueprints., • Experience with TIG welding is beneficial., • Familiarity with Flux core welding is advantageous., • Enjoy above-market compensation with the potential to earn over $30/hr based on your weld test results and experience., • Benefit from a fast-paced work environment where your skills are constantly put to the test, ensuring a stimulating and rewarding workday., • Work in a clean and well-maintained welding, machine, and paint shop alongside over 100 dedicated employees. The pay range for this position is $20.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Spokane Valley,WA. Application Deadline This position is anticipated to close on Oct 30, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionWelder – Airway Heights, WA | Up to $30/hr | 4-10's Schedule Aerotek is currently hiring experienced Structural Welders to support a growing steel fabrication operation in Airway Heights. This is a contract-to-hire opportunity offering excellent pay, long-term career prospects, and a consistent 4-day work schedule. We’re looking for welders who are confident with Flux Core welding and can read blueprints with precision. What You’ll Do: • Interpret technical drawings and blueprints to perform accurate welding and fitting, • Use Flux Core Arc Welding (FCAW) techniques with .045 and 1/16 wire, • Execute 5/16 fillet welds that meet structural integrity standards, • Maintain a clean, safe, and efficient work area, • Hands-on experience with FCAW welding, • Strong blueprint reading and interpretation skills, • structural steel fabrication, • Ability to obtain or currently hold WABO and AWS certifications, • Spacious indoor facility with designated welding bays, • Choose from two fixed shifts:, • Day Shift: 4:00 AM – 3:30 PM (Monday–Thursday) The pay range for this position is $22.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Airway Heights,WA. Application Deadline This position is anticipated to close on Oct 28, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Welder – Day Shift Schedule: Day Shift Overview: Join a fast-paced job shop specializing in metal parts for various industries. As a Welder/Fitter, you'll primarily work with mild steel using MIG welding Key Responsibilities: • Read and interpret blueprints for welding and fabrication, • Perform MIG welding in all positions with precision, • Handle and process materials during fabrication, • Proficient in MIG welding, • Ability to read technical blueprints, • TIG welding experience, • Familiarity with flux core welding The pay range for this position is $20.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Spokane Valley,WA. Application Deadline This position is anticipated to close on Oct 31, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Join Our Team at voestalpine Railway Systems Nortrak! Embark on a rewarding career journey with voestalpine Railway Systems Nortrak, North America's premier designer and manufacturer of special trackwork. With a legacy spanning 160 years, we lead the industry in shaping the future of rail solutions. As part of the voestalpine Railway Systems global network, we are committed to delivering quality products and services, including rails, turnouts, fastening systems, signaling technologies, and monitoring solutions. Operating with a presence across Canada, the US, and Mexico, we prioritize the well-being of our people, global mobility, and sustainability and innovation. Our people are the foundation of our success. Skilled, motivated, and results-driven individuals shape our culture demonstrating our core values of Respect, Responsibility, Curiosity, Courage, Passion, and Diversity each day. This commitment is more than shared values; it extends to shared responsibilities for safety and quality, showing genuine care for one another's growth and development, a commitment to our customers, and fostering strong relationships within the Nortrak Team and with our customers. PURPOSE OF POSITION The Welder is responsible to build / repair and maintenance of production molds. Assisting production department in assembly of molds is frequent and assisting Maintenance department in basic welding tasks. This position is concerned a Safety Sensitive Position. Task and Responsibilities: • Process and organize products according to the blueprints and drawings., • Fabricating or Repair and Maintenance., • Assisting Line Workers or assembling Forms., • Pre-shift and end of shift equipment inspections., • Maintain a clean and tidy environment., • Participation in Safety Program., • Adhere to Nortrak’s Safety, Quality and Environmental Procedures, Practices and Policies., • Model and lead our Nortrak Blue culture and values: (Respect, Responsibility, Curiosity, Courage, Passion, and Diversity)., • Perform other duties as assigned. Physical Demands: • Prolonged periods of standing, walking, stooping, kneeling, crouching or climbing., • Use hands to handle or feel objects, tools or controls, and reach with hands and arms., • Regularly lift and move up to 20-25 pounds, occasionally lift and move up to 75 pounds., • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus., • Hearing abilities related to job assigned. Job Requirements (e.g. education, experience, skills and desired competencies) • High School graduate or GED preferred., • Minimum one year of welding experience required., • Certified welder multiple positions, blueprint reading, operation of all fabrication equipment and techniques preferred., • Ability to read work orders and blueprints preferred., • Spokane Valley, Washington Salary: • $24.20/hr - $25.77/hr Benefits: • A supportive, family oriented Nortrak Blue culture., • We provide an environment where Health and Safety is our #1 priority., • Career development opportunities and competitive pay progression., • Competitive medical, dental & vision benefits., • Company paid life and disability insurance., • Paid holidays and vacation., • Retirement plan with matching contributions., • Tuition Assistance Program., • Wellness Program., • Employee Assistance Program., • Employee Recognition Programs. If you think you have the necessary qualifications and drive to excel in our team, we invite you to apply now and join us at voestalpine Railway Systems Nortrak. Apply today! voestalpine Railway Systems Nortrak (“Nortrak”) is a subsidiary of voestalpine AG () one of Europe’s premier steel producers with over 50,000 employees worldwide. Nortrak is closely affiliated with voestalpine’s Railway Systems group which operates in 21 countries across the globe to provide cutting edge system-based solutions to railroads and transits. Our website is voestalpine Railway Systems Nortrak is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected Veteran status, and any other federal, state, or locally protected classifications. INDHP #ZR Company Descriptionvoestalpine Railway Systems Nortrak, with ten production facilities across Canada, US and Mexico, is North America’s leading designer and manufacturer of special trackwork for the railway industry. As the industry’s technology leader, we take pride in providing superior products, excellent customer service and unbeatable engineering design services to our customers. We are committed to bringing innovative solutions, products, and services to our customers across rail freight and transit segments.voestalpine Railway Systems Nortrak, with ten production facilities across Canada, US and Mexico, is North America’s leading designer and manufacturer of special trackwork for the railway industry. As the industry’s technology leader, we take pride in providing superior products, excellent customer service and unbeatable engineering design services to our customers. We are committed to bringing innovative solutions, products, and services to our customers across rail freight and transit segments.

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Spokane, WA. Most positions are first shift with a pay scale of $25-30/hour based on experience & skill level. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • MIG, TIG, Stick & Structural Welding, • Air Arc, • Repair Welding, • Pipe & Mechanical, • Basic Tools for the Trade, • Proper PPE must be worn: Have your own Hood and Gloves/Leathers Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development. 512tpAguwl

Job DescriptionSalary: $18-$33 per hour Company Background: Washington Equipment Manufacturing Company, Inc. (WEMCO, Inc.) is a contract manufacturer that specializes in the design, engineering, and manufacturing of productivity-enhancing solutions, such as overhead cranes for material handling, automated aerospace tooling and parts, agricultural equipment, and custom machinery used in multiple industries around the world. WEMCO, Inc.s facility is fully integrated with the capability to perform nearly all services in-house. Our current capabilities include design, engineering, welding, machining, painting, assembly, testing, and installation of complex machinery. Job Purpose: As a Welder, you will join, fabricate, and repair metal and other weldable material(s) by applying appropriate welding techniques and operating various welding devices. Job Responsibilities: • Read and interpret blueprints and drawings, • Take and read measurements to plan layout and align components using various measuring tools and clamp pieces, • Safely and accurately cut and join materials using appropriate equipment in various positions, • Ability to determine the appropriate welding equipment and/or method based on requirements, • Perform inspections and measurements to ensure part dimensions, features, and tolerance requirements are met per the print specifications, • Follow all paperwork and documentation procedures including but not limited to: work orders, inspection reports, non-conformance reports, and others as required, • Ensure communication flow down utilizing any means necessary; verbal, team meeting, taking notes, documenting instructions, documentation in lessons learned log, etc., • Maintain a high regard for quality workmanship and compliance to customer requirements, • Maintain a cooperative attitude and willingness to learn, • Maintain work area and equipment in a clean and orderly condition, • Overtime and shift changes may be required as business needs demand, • Comply with all quality requirements while continually maintaining and improving the effectiveness of the quality management system, • Support and participate in department goals and company objectives, • Look for opportunities to learn and share your knowledge and skills, • Punctual attendance; at your work area at shift start, • Treat others with respect and maintain a professional attitude, • Be honest and ethical in all dealings, • Other duties as assigned Job Requirements: • At least 1 year of prior welding experience is preferred, • Passing score on WEMCOs weld test Weld test will be administered prior to interview, • Passing score on 3rd party 3G & 4G weld test within 90 days of hire., • Professional certification through the American Welding Society (AWS) or approved alternate, • Experience using a wide variety of welding equipment and procedures (TIG, MMA, etc.) preferred, • Intermediate knowledge of metal types and material properties, • Experience using pneumatic, electrical, and manual tools such as grinders, saws, squares, calipers, etc., • Ability to read, interpret, and understand technical documents and drawings, • Strong desire and ability to grow yourself and learn from others, while sharing your knowledge with others and building good relationships with peers, • Must have, or have the ability to obtain a US Passport Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position involves work in our shop and at job sites where work will be performed both indoors and outdoors. The employee must frequently lift or move up to 25 pounds and occasionally lift or move up to 50 pounds with the assistance of an overhead crane. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. While performing the duties of this job, the employee is regularly required to sit and stand, walk, use fine finger manipulation, and use their hands to handle and grasp objects. The employee is occasionally required to climb and balance, bend, stoop, twist, and/or crouch. Overtime may be required to meet project deadlines. Benefits: • Paid time off, • Holiday pay, • Medical Insurance, • Dental Insurance, • Vision Insurance, • Other Supplemental Insurance, • 401k Retirement Plan, • Employee Referral Program

Job Description About the Work: Join a dynamic steel-fabrication firm that handles structural, industrial, oil & gas, bridge, and special construction projects. You’ll work hands-on from concept to finished build welding, fitting, fabricating, and helping bring complex steel projects to life. What You’ll Do: * Perform MIG welding (and sometimes flux-core) on structural steel, plates, beams, stairs, platforms, and misc steel components * Read and interpret blueprints, shop drawings, and weld symbols * Fit, lay out, tack, and weld parts to meet specifications * Use grinders, cutting torches, saws, and basic fabrication tools * Inspect welds, ensure quality control, and rework as needed * Maintain a clean, safe, and organized workspace * Occasionally assist with rigging, material handling, and shop support tasks * Work with the engineering/design teams to resolve fabrication or welding challenges What We’re Looking For: * Proven experience as a MIG or structural welder/fabricator * Ability to read and understand blueprints and welding symbols * Strong skills in layout, tacking, and finish welding * Knowledge of steel types, welding techniques, and weld quality standards * Use of hand and power tools common in metal fabrication * Attention to detail, commitment to safety, and willingness to learn * High school diploma or equivalent * AWS certification is a plus (but not required) * Ability to lift, bend, and stand for extended periods

Job DescriptionDescription: TIG Welder – Tier 2 Location: Airway Heights, WA Job Highlights • Pay: $21.50 – $24.50 per hour (DOE), • Schedule: Monday–Friday, 7:00 AM – 3:30 PM, • Overtime: Available as needed, • Benefits: Medical, Dental, Vision, 401(k) with match, PTO, and more, • Work Environment: Clean, well-equipped fabrication shop Shredfast, Inc. is seeking an experienced TIG Welder to join our fabrication team. We build the nation’s leading mobile document disposal and data destruction vehicles, and we’re looking for welders who take pride in precision and craftsmanship. We offer competitive pay, excellent benefits, and steady full-time hours in a supportive team environment. Benefits: • Medical, Dental & Vision (Premera Blue Cross Blue Shield) after 60 days, • 401(k) with Company Match after 12 months, • Paid Time Off (PTO) & Family Medical Leave, • Voluntary Benefits (Accident, Critical Illness, Life, Disability, etc.), • TIG weld aluminum and stainless steel components, • Perform fabrication tasks including cutting, grinding, and shaping, • Read and follow blueprints, schematics, and technical drawings, • Inspect materials and monitor welds for accuracy and quality, • Maintain equipment and a clean, safe work environmentRequirements: Requirements: • 2+ years TIG welding experience (or trade school equivalent), • Strong blueprint reading & shop math skills, • Steady hand, attention to detail, and safety-minded, • Ability to lift 50 lbs. and work on ladders/vehicles, • Must pass pre-employment drug screen & background check (includes THC/CBD), • Reliable transportation required; must be 18 or older, • Tools provided; forklift & crane training included

Job Description NIC Global is a single-source manufacturer providing turn-key mechanical and electromechanical assembly, expert sheet metal fabrication, and global sourcing of metal and plastic components. We provide products to great customers such as Philips, PACCAR (Kenworth & Peterbilt), Schweitzer Engineering Laboratories, Physio Controls, and Leviton to name a few. Our growing company employs over 600 people in Washington, Tennessee, Ohio, and Texas. Come work with us and experience our fun atmosphere that provides a great place to work and grow your career. Employees are celebrated through quarterly employee appreciation events, holiday parties, cook outs, company gifts, and various other employee events and recognition programs. We feel that great companies value their employees, and those employees are vital to the overall success of the entire organization. In addition to an outstanding company culture, NIC Global offers other great benefits including: Eligible for insurance 1st of the month after 30 days, including: • Choice of two health insurance plans, • Employer paid employee dental Insurance, • Employer paid life insurance, AD&D, and long-term disability plans, • Vision Insurance, • Additional Life Insurance, • Accident insurance, • Critical illness insurance, • 401(k) plan, with employer match JOB SUMMARY Uses knowledge of welding techniques to fabricate metal components and assemble structural forms. ESSENTIAL FUNCTIONS/DUTIES • Proficiently performs TIG & MIG welds on (steel, stainless, aluminum); gauge 18 – 12., • Grinds off excess weld, slag, or splatter using portable grinders., • Carries out welding jobs by learning, reading and following job order specifications, blueprints, work instructions, and procedures., • Maintains a safe and clean working environment by complying with procedures, rules, and regulations., • Ensures equipment remains operational by completing preventive maintenance requirements., • Must be dependable with strong time management skills., • Ability to make adjustments to the welding machine for different materials and thickness., • Additional duties and responsibilities may be assigned., • Minimum two (2) year technical degree preferred; minimum 1-2 years welding related experience and/or training; equivalent experience may replace all or part of formal education., • Requires basic welding aptitude., • Other Required Knowledge, Skills and Abilities: Language Skills: Ability to read, understand and comprehend documents such as safety rules, operating and maintenance instructions, simple drawings. Ability to speak effectively and interact with other team members, to express needs and ask questions. Reasoning Ability: Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form., • CPR Certified preferred

Job Summary: We are looking for skilled Welders and/or Fitters (knowledge of both is a plus) to cut and join metals and other materials at our Spokane, WA facility. Essential Job Functions 1. Perform FCAW (2G) welding. Be able to pass 2G test in FCAW on 1" thick coupon., 2. Operate air arc to remove steel (back gouging)., 3. Grind with 90° angle grinder., 4. Read weld symbols and check weld size using weld fillet gauges., 6. Set machines according to procedure charts., 7. Use air chipper to chip of slag., 8. Use natural gas propane heaters to pre-heat steel., 9. Operate stud welder., 10. Follow weld procedures as it applies to volts, amps & wire feed speed., 11. Heat, straighten and be able to know when to use pre-heat to offset distortion., 12. Perform other duties as required by management. Shift Times: Monday-Thursday: 5:00am-3:30pm Friday: 5:00am-1:30pm Qualifications and Requirements Required: Must be able to lift a minimum of 50 lbs. over shoulder height. Be able to read blueprints. FCAW (2G). Be able to read weld symbols and be familiar with weld procedures. Must be familiar with WP1 (manual shielded metal arc welding of carbon steel) and WP2 (Flux cored are welding of carbon steel) and WP3 (Flux cored arc welding with gas shielding of carbon steel). Preferred: Two or more years' experience in manufacturing in the steel fabrication industry. Proficiency and use of Software, equipment, machines, tools, electronic device necessary for job: Air arc, 90° angle grinder, crane, heating torch, cutting torch.

Parker - JobID: 16736090 [Fabricator] As a Welder at Parker, you'll: Read and interpret project plans, blueprints and other written instructions and diagrams; Prepare parts for welding including cleaning, de-bur and grind metal as necessary; Perform certified welding operations based on repair needs

Aerotek - JobID: JP-005608121 [Fabricator] As a Welder at Aerotek, you'll: Require reading blueprints to determine locations and quantities of required materials; Fabricate metal parts such as steel and aluminum frames or beams; Perform other duties as assigned.

Aerotek - JobID: JP-005608639 [Fabricator] As a Fitter at Aerotek, you'll: Perform structural fitting on large boiler framework components; Follow the layout and fitting of parts according to blueprints; Assist with pre-fab work as needed, drilling holes, cutting parts, and utilizing an overhead cra

Job Duties Provides safe and efficient operation of equipment used for the movement of packages/documents/heavyweight, dangerous goods and ULDs.Assists in the buildup/breakdown of pallets containing heavyweight freight.Serves as liaison between company and ULD repair vendor, as required.Performs oth

Aerotek - JobID: JP-005615444 [Fabricator] As a Welder at Aerotek, you'll: Require reading blueprints to determine locations and quantities of required materials; Fabricate metal parts such as steel and aluminum frames or beams; Perform other duties as assigned.

Relocation provided! Full benefits including company pension plan, quarterly bonuses, OT, growth opportunities.This Jobot Job is hosted by: Dan Asher.Are you a fit? Easy Apply now by clicking the "Apply Now" button and sending us your resume.Our client is a leader in the manufacturing of aluminum an

Aerotek - JobID: JP-005617322 [Fabricator] As a Welder at Aerotek, you'll: Require reading blueprints to determine locations and quantities of required materials; Fabricate metal parts such as steel and aluminum frames or beams; Perform other duties as assigned.

W AERO ROAD STE F [Warehouse Associate / Forklift Operator / Up to $29.As a Forklift Operator at Costco, you'll: Operate an electric stand-up forklift to move pallets of merchandise and equipment throughout the warehouse; Hand stack product from partial pallets onto full pallets of productEnjoy a co

Want to apply Read all the information about this position below, then hit the apply button.The Applied Technologies division at Wagstaff specializes in the engineering and fabrication of stainless steel gloveboxes for the nuclear industry.Our team is growing in this division!.Pay includes shift dif

Shari's Cafe and Pies - 12502 N Division St [Dishwasher / Busser / Porter / Cleaning] As a Dish Machine Operator at Shari's, you will: Load, run and unload dish machine; Keep the dish machine clean and report any functional or mechanical problems; Wash and store all tableware and kitchenware; Keep d

Spherion - JobID: 45883006 [Production Operator / Machinist] As a CNC Machine Operator at Spherion, you'll: Operate CNC machines to produce precision parts; Monitor machine operations and make adjustments as needed; Inspect finished products for quality control; Maintain a clean and safe work enviro

Shari's Cafe and Pies - 5602 N Division St [Dishwasher / Busser / Porter / Cleaning] As a Dish Machine Operator at Shari's, you will: Load, run and unload dish machine; Keep the dish machine clean and report any functional or mechanical problems; Wash and store all tableware and kitchenware; Keep di

Aerotek - JobID: JP-005608635 [Production Operator / Machinist] As a Machine Operator at Aerotek, you'll: Operate equipment and/or second-operation machines through various tasks ; Perform inspecting, trimming, testing, fixturing, assembling, and packaging products; Perform other duties as assigned

PeopleReady - PR-1476803 [General Laborer] As a General Laborer at PeopleReady, you'll: Assist with event set up, breakdown, and general maintenance to ensure venues are clean and welcoming; Support manufacturing processes by assembling products, operating machinery, and performing quality checks; L

Aerotek - JobID: JP-005615339 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.

Parker - JobID: 16862181 [Assembly Line Worker / Production Worker] As an Assembler at Parker, you'll: Perform repetitive bench or line assembly operations to mass-produce products; Operate a variety of deburring equipment; Place parts in specified relationship to each other; Crimp, press, attach an

Aerotek - JobID: JP-005608685 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.

The Applied Technologies division at Wagstaff specializes in the engineering and fabrication of stainless steel gloveboxes for the nuclear industry.Our team is growing in this division!.Pay includes shift differential & premium.As an employee of Wagstaff, youll enjoy:.Up to 8% retirement contributio

Aerotek - JobID: JP-005608649 [Production Operator / Assembly Line Worker] As an Electrical Assembler at Aerotek, you'll: Perform mechanical assembly on different electronic products; Read and interpret blueprints, and quality-check the final products; Perform other duties as assigned.

Weyerhaeuser Distribution is a leader in distributing building products for residential, light commercial and home improvement applications worldwide.We have an immediate opening for a Forklift and Building Materials Operator at our Spokane Valley Distribution Center, and we encourage you to review

Aerotek - JobID: JP-005611491 [Production Operator / Assembly Line Worker] As an Assembler at Aerotek, you'll: Perform assembling, loading, and unloading of parts; Be involved in a fast-paced environment and many overtime opportunities; Perform other duties as assigned.

Airway Heights) Spokane, WA - Full &/or Part-time/Hourly.Transport materials to or from storage or work sites to designated area.Load and unload materials from vehicles, into vehicles, and into or out of containers.Handle a multitude of materials in accordance with company standards avoiding damagin

A client of Insight Global is looking for a material handler to support their warehouse operations in Spokane, Washington.The ideal candidate will come from an industrial warehouse background and be extremely comfortable operating a forklift.Daily responsibilities will include distribution-related f

GreyStar - Jake at Indian Trail [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and make r

Weyerhaeuser Distribution is a leader in distributing building products for residential, light commercial and home improvement applications worldwide.We have an immediate opening for a Forklift and Building Materials Operator at our Spokane Valley Distribution Center, and we encourage you to review

Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day.As an employee of Wagstaff, youll enjoy:.Up to 8% retirement contribution.Sqft onsite gym, accessible 24/hrs a day.Family-friendly, company-wide events.To view our full benef

Weyerhaeuser Distribution is a leader in distributing building products for residential, light commercial and home improvement applications worldwide.We have an immediate opening for a Forklift and Building Materials Operator at our Spokane Valley Distribution Center, and we encourage you to review

The Applied Technologies division at Wagstaff specializes in the engineering and fabrication of stainless steel gloveboxes for the nuclear industry.Our team is growing in this division!.Pay includes shift differential & premium.As an employee of Wagstaff, youll enjoy:.Up to 8% retirement contributio

Wagstaff manufactures equipment for aluminum producers, who process formed aluminum into parts and products you use every day.As an employee of Wagstaff, youll enjoy:.Up to 8% retirement contribution.Sqft onsite gym, accessible 24/hrs a day.Family-friendly, company-wide events.To view our full benef

GreyStar - Diamond Rock Rentals [Facilities Maintenance] As a Maintenance Technician at GreyStar, you'll: Complete assigned work orders generated from resident requests for service, as well as preventative maintenance on the property; Diagnose the source or cause of the defect or problem, and make r

The Applied Technologies division at Wagstaff specializes in the engineering and fabrication of stainless steel gloveboxes for the nuclear industry.Our team is growing in this division!.Pay includes shift differential & premium.As an employee of Wagstaff, youll enjoy:.Up to 8% retirement contributio

Aerotek - JobID: JP-005595701 [Maintenance Technician] As a Maintenance Worker at Aerotek, you'll: Perform general and preventative property maintenance; Repair or general maintenance work of facilities, buildings, grounds, and equipment; Perform other duties as assigned.

The jobs listed are examples of the typical kinds of positions that Costco may hire for when openings exist.The listing does not mean that any positions are currently open or available at Costco.Position Summary: Operates seated forklift, loading pallets from floor to trailer.Prepares slip sheets an

Provides safe and efficient operation of equipment used for the movement of packages/documents/heavyweight, dangerous goods and ULDs.Assists in the buildup/breakdown of pallets containing heavyweight freight.Serves as liaison between company and ULD repair vendor, as required.Performs other duties a

Boise Cascade has been in the business of manufacturing wood products and distributing building materials for over half a century.We are one of the largest producers of engineered wood products and plywood in North America and a leading U.Because our business is built on relationships, our associate