Welder jobs in San Antonio, TexasCrear alertas

Job Description Autobody Technicians repair vehicles thoroughly, safely, and by industry guidelines/standards. • Complete dis-assembly of vehicle in order to assist Service Advisors in assessing damage to prepare a 100% Repair Plan., • Ensure all needed repairs identified to eliminate supplements and minimize repair time., • Plan work procedure: follow work order for all operations listed., • Remove upholstery, electrical and hydraulic window and seat operating equipment and trim to gain access to damaged area of vehicle if needed. Store parts on carts or cover to eliminate potential damage., • Mend damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged fenders, panels, and grills; and bolts or welds replacement parts in position and reassemble after parts are painted., • Operate a variety of hand and power tools (e.g., welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.), • File, grind, and sand repaired surfaces with 180-grit paper before turning vehicle over to the Paint Dept., • Repair or replace defective parts., • Ensure all needed repairs identified to eliminate supplements and minimize repair time., • Inspect and test drive repaired vehicles to check for compliance with safety and quality standards; Wash and prepare vehicles for customer return., • Perform other related duties as assigned relating to, but not limited to washing cars, cleaning the shop, etc., • Comply with all JD Collision Express safety rules, guidelines, standards, and SOP’s. Requirements: • You are at least 18 years of age., • Reliable transportation., • You must have your own tools., • You must have at least 2 years’ work experience., • You must be able to effectively communicate with others., • You are able Ability to read and understand instructions, written estimates, and work orders., • You must be able to multi-task and adapt easily to a fast-paced environment., • You have, and are able to maintain, a well-groomed appearance., • Must be a Team Player. Physical Requirements / Working Conditions Position is based in a normal shop environment. Occasional physical activity such as reaching below and above shoulder level, kneeling, bending, squatting, and stooping to inspect repairs, and lifting and carrying objects over 50lbs. Exposure to fumes, chemicals, dust, along with high levels of noise. Subject to weather conditions both inside and outside. Required to wear protective equipment when necessary. Must have visual acuity to determine the accuracy and thoroughness of the work assigned.

Job Description Body Technician - Seguin, TX USA 401k starts on day 1, Benefits are available after 1 month, and Top Pay for Top Techs! Responsible for completing high-quality auto body repairs assigned in the shortest time possible while ensuring exceptional service to our customers. Essential Job Functions: • Perform duties associated with auto body repair including but not limited to disassembly; removal of auto equipment for repair access; completing all repairs by hammering, filing, filling, grinding, welding, sanding, etc.; and reassembly ensuring industry and JHCC standards are met., • Repair or replace defective parts., • Operate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.), • Follow protocols provided for repairs., • Strong, consistent attention to detail., • Demonstrated ability to be able to read, write and communicate., • Positive, can-do attitude with the desire to work in a team setting, • Extensive knowledge of performing high-quality repairs using up-to-date methods., • Ability to use all power tools required to perform position., • Minimum of three (3) to five (5) years of auto body experience required., • Reliable attendance, • Ability to bend, kneel, and/or squat to perform tasks, • Ability to lift, carry, push, and pull at least 10 pounds, • Ability to perform heavy lifting, carrying, pushing, or pulling of up to 100 pounds, • Ability to twist and turn, • Ability to climb steps (e.g., frame machine), • Ability to stand for extended periods of time, • Ability to perform overhead work (e.g., installing a hood on a vehicle, using frame machine, retrieving parts), • Ability to perform tasks while laying on back, • Ability to accurately identify all vehicle parts and repair needs, • Ability to perform or learn to disassemble, repair parts, replace parts, and align frame damage, etc., • Availability and ability to attend or complete training classes or webinars on all repair tools, equipment, and methods:, • Examples would include specific courses to become certified to repair collision damage: I-Car, A/C, OEM, etc., • Ability to work with the following tools/equipment properly and safely:, • Welder, laser measuring system, frame machine, clamps, a/c machine, and other hand tools, dent puller, • Ability to properly maintain and wear all safety equipment required by JHCC and OSHA standards (e.g., eye protection, ear protection, gloves, respirator, welding helmet, etc.), • Ability to take direction and perform tasks in an efficient and orderly manner, • Ability to maintain organization and cleanliness of work area, free of safety hazards Company DescriptionJoe Hudson’s Collision Center does the highest-quality repairs in the shortest possible time. Our expert technicians use state-of-the-art technology for excellent results, guaranteed. Our Customers Come First Since 1989, we’ve maintained a workforce of well-trained technicians who can completely repair any type of damage, from chipped paint to serious structural issues. We pride ourselves on excellent communication, so we reliably answer calls and keep clients up to date with our proprietary repair tracking system, which displays the status of your vehicle on demand. Hudson’s Collision Center does the highest-quality repairs in the shortest possible time. Our expert technicians use state-of-the-art technology for excellent results, guaranteed.\r\n\r\nOur Customers Come First\r\nSince 1989, we’ve maintained a workforce of well-trained technicians who can completely repair any type of damage, from chipped paint to serious structural issues.\r\n\r\nWe pride ourselves on excellent communication, so we reliably answer calls and keep clients up to date with our proprietary repair tracking system, which displays the status of your vehicle on demand.\r\n\r\n

Job Description Job Description Job Duties Individuals will be assigned tasks based on their capabilities and will have the opportunity to gain exposure to current industrial practices and procedures in a modern workplace. Duties will include layouts, fit-ups, and weld joint completions using a variety of weld procedures in multiple environments at our client’s location. Tasks will vary and may involve structural weldments, pressure vessels, construction, and field fitment of piping systems and structural components. Candidates must be able to work with a wide range of power tools, hand tools, and material-handling devices. Strong attention to detail is required, particularly with following shop drawings and ensuring accurate fit and weld dimensions as specified per project. Required Education, Knowledge, Skills, and Abilities • High school diploma or equivalent required., • High-level understanding of how to read and interpret shop and ISO drawings and related terminology., • Ability to understand complex instructions and communicate those instructions to junior-level technicians., • Ability to interact with engineering staff and train others as needed., • Knowledge of piping and structural systems and the tools required for this work., • Near mastery of multiple welding processes and demonstrated proficiency welding in multiple positions and situations., • Must have 2 to 5 years of welding experience in pipe and/or structural work. Physical Requirements This is a physically demanding position with exposure to metal heated to melting point, noise, and outdoor elements. While lifting assistance is available, lifting, carrying, and moving large solid objects is required. Grinding dust, fumes, and flames will be present. Candidates must be able to pass an MVR. Steel-toed shoes are required. Uniforms will be provided. Work hours are Monday through Friday, 7:00 AM to 4:00 PM. Join the Cross Resource Group Team! At Cross Resource Group, we value our employees and are dedicated to providing a rewarding and inclusive work environment. We are proud to offer a competitive and comprehensive benefits package to meet the diverse needs of our team. Employee Benefits Include: • Healthcare Insurance: Comprehensive coverage to ensure access to quality healthcare., • Dental Insurance: Robust coverage for optimal oral health., • Vision Insurance: Regular exams and corrective lenses covered., • Disability Insurance: Short and long-term coverage protecting against loss of income due to illness or injury. Become a part of a dynamic team committed to professional growth and development. Explore our job openings and experience the rewards of being part of a company that values your health, happiness, and success.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Structural Welders in Sturgeon Bay, WI! $34/hour- $660/ per week per diem Job Description: • Complete welding projects using flux core and stick processes., • Must be able to read blueprints and other engineering drawings., • Tack weld clips and brackets in to place prior to permanent welding., • Fabricate, align, and assemble structural parts such as plates, bulkheads, and frames., • Ability to comprehend blueprints, sketches, weld symbols, material types, and templates., • Must have a thorough knowledge of various metals characteristics and qualities including the correct welding processes required and the effects of welding on the material. Requirements Job Requirements: • Minimum 5 years of shipyard welding experience., • Successfully pass welding tests to receive job offer., • Must have reliable transportation., • Familiar with OSHA regulations relative to the shipbuilding industry., • Pass drug test and background check., • Comfortable with heights and in confined spaces., • Lift 50lbs without assistance., • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required. CTS offers a comprehensive benefit packet to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Structural Welders in Sturgeon Bay, WI! Pay Rate: $30/hour and $660/week per diem Job Description: • Complete fillet and butt welds using the SMAW, GMAW, FCAW, and GMAW-P process (multi-pass) in 2G, 3G, and 4G positions., • Heat oxygen/propane heating torch., • Perform grinding and pick up work as needed., • Complete air carbon arc gouging., • Properly use fillet and butt gauges., • Minimum 8 years of naval/commercial welding experience., • Successfully pass several tests over a three-week period., • Must have reliable transportation., • Familiar with OSHA regulations relative to the shipbuilding industry., • Pass hair follicle test and background check., • Comfortable with heights and in confined spaces., • Lift 50lbs without assistance., • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job Description Commercial Sub-Contractor seeking employee with knowledge of working with basic hand tools such as Welder, Tape Measure, Jig Saw, Drills, etc. Some knowledge of sectional or rolling doors or willing to learn and the possibility of advancement with the company. Work days are from Monday thru Friday 7:00AM to 5:00PM with possible overtime required. Must be able to pass background check and clean driving record required. Pay based on experience and knowledge. Company DescriptionAlamo Door Systems, a leading assembler and distributor of construction products with a continuous business history in Central and South Texas. We offer a friendly, fast paced environment with competitive pay and benefits, with the opportunity for growth and on the job training/certifications. Benefits include: health insurance, paid vacation, paid holidays, sick leave, and simple IRA plan. Come join our team, and find your new work home!Alamo Door Systems, a leading assembler and distributor of construction products with a continuous business history in Central and South Texas. We offer a friendly, fast paced environment with competitive pay and benefits, with the opportunity for growth and on the job training/certifications.\r\n\r\nBenefits include: health insurance, paid vacation, paid holidays, sick leave, and simple IRA plan. \r\n\r\nCome join our team, and find your new work home!

Job Description Welder – Structural & Pipe Location: San Antonio, TX Schedule: Full-Time, Monday - Friday 7:00 am - 4:00 pm Industry: Industrial / Fabrication / Manufacturing About the Role We are seeking a skilled Welder to join our team and support a wide range of industrial projects. In this role, you will perform layout, fit-up, and welding tasks across multiple environments, gaining hands-on exposure to modern industrial practices. Work includes structural weldments, pressure vessel construction, and field fitment of piping systems and components. This is an excellent opportunity for welders looking to broaden their experience with diverse equipment and shop operations. Responsibilities • Perform layout, fit-up, and weld joint completions using a variety of welding procedures., • Work on structural weldments, pressure vessels, piping systems, and structural components., • Operate overhead cranes, forklifts, powered hand tools, and material-handling devices., • Follow shop drawings, ISO drawings, and weld symbols with strict accuracy., • Perform field fitment and assist in the assembly of piping and structural systems., • Communicate instructions to junior technicians and interact with engineering staff., • Train in related skills as needed and support various welding and fabrication tasks. Requirements • High School Diploma or equivalent (required)., • 2–5 years of welding experience in pipe and/or structural environments., • Strong ability to read and interpret shop drawings, ISO drawings, and weld symbols., • Proficiency in multiple welding processes, including multi-position welding., • Ability to understand complex instructions and collaborate with engineering teams., • Knowledge of piping and structural systems and related tools. Physical Requirements • Ability to stand, walk, and perform physical tasks for extended periods., • Work in environments with heated metals, noise, fumes, grinding dust, and outdoor exposure., • Must be able to lift, carry, and move large solid objects (lifting assistance available). Why Join Us? • Exposure to cutting-edge industrial welding techniques, • Opportunities for skill advancement and cross-training, • Hands-on work with a variety of equipment, tools, and fabrication tasksCompany DescriptionWith 40 years of experience, Tri-Starr Talent is comprised of exceptionally talented and experienced Recruiters, Researchers, Interviewers and Industry Experts. Through in-depth research and one on one coaching, we identify your strengths and match them with positions that allow you to thrive - no excuses. At Tri-Starr, we work for you.With 40 years of experience, Tri-Starr Talent is comprised of exceptionally talented and experienced Recruiters, Researchers, Interviewers and Industry Experts. Through in-depth research and one on one coaching, we identify your strengths and match them with positions that allow you to thrive - no excuses. At Tri-Starr, we work for you.

Job Description Classification: Non-Exempt Pay: $28-$32 Depending On Experience We are Alsco Uniforms. We’ve been working hard for our customers since 1889 when we invented the uniform and linen rental industry. Alsco Uniforms has grown into a worldwide leader serving over 350,000 customers in 13 countries. It’s our job every day to make every aspect of the customer experience better. Whatever our customers need, Alsco Uniforms finds the answers that work for them. Our employees are the heart and soul of Alsco Uniforms. As a result, we have a long history of strong financial performance, continuous improvement, and customer service. We’re seeking driven professionals with ambition to grow within our company. We’d love to talk to you about how you can fit into our team of diverse individuals and how your hard work will be rewarded with competitive pay and benefits and ongoing career development. Join our team and build your career with Alsco Uniforms! Job Summary: The Maintenance Technician is responsible for installing, repairing and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems. This position reports to the Chief Engineer. Our full-time employees enjoy: 401K Plan with Company Match Medical, Dental, Vision, FSA/HSA Life Insurance, Disability Insurance Vacation, Sick Time, Holidays Choice of Global Cash Card or Direct Deposit Career Advancement Learning & Development Opportunities Inclusive and Diverse Team Environment Essential Functions: • Installs, repairs and performs preventative maintenance on industrial processing equipment, water levels, water systems and other equipment and systems., • Troubleshoots electrical issues., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Looks for opportunities to continually improve maintenance processes., • Works with all plant personnel in a cooperative and professional manner., • Strictly adheres to all safety rules, policies and procedures required by Alsco, law, and what is recognized as common practice in the industry., • Ensures work is performed safely and efficiently., • Maintains technical knowledge by attending educational workshops and reviewing technical publications. Remains current on equipment and repair procedures and best practices., • Studies blueprints and manufacturers’ manuals to determine correct operation of machinery., • Proficient in reading electrical schematics., • Maintains accurate and timely records of maintenance performed., • Follows written and verbal instructions and performs other tasks as directed by supervision., • Complies with all Federal, State and local laws. Additional Functions: • May work with and support other branch personnel as required by supervision., • Drive and pick up parts, transport equipment, parts, etc. Qualifications: • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230 volt systems., • PLC programming experience., • Experience in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management, • High school graduate or equivalency preferred., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing. Typical Environmental Conditions: • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds. Travel Requirements: • Occasionally, such as to procure parts. The Maintenance Technician must perform the essential duties and responsibilities with or without reasonable accommodation efficiently and accurately, and without causing significant safety threat to self or others. The statements made herein are intended to describe the general nature and level of work being performed by employees assigned to this job classification. They are not intended to be construed as an exhaustive and inclusive list of all responsibilities, duties, and/or skills required of personnel so classified. For a general description of benefits that are being offered for this position, please visit alsco.com/benefits. Alsco Uniforms is an Equal Employment Opportunity Employer. Candidates are considered for employment with Alsco Uniforms without regard to their race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran), or other classification protected by applicable federal, state, or local law. Revised: 04/29/2022

Job DescriptionDescription: Description A Maintenance Mechanic repairs equipment, fabricate parts and maintain parts inventory associated with all equipment. Essential Functions/Job Duties: • Make necessary repairs to all equipment when needed, • Fabricate parts and structures for machinery and equipment, • Operate metalworking machinery that will include and not limited to: band saw, lathe and welder., • Count and maintain spare parts inventory, • Source parts when needed and follow mandated purchase order requirements, • Must have mechanical knowledge with regards to motors, bearings, and gears., • Basic understanding of electrical circuits and power requirements., • Welding and fabrication skills, • Knowledge of proper safety requirements, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions., • Make necessary repairs to all equipment when needed, • Fabricate parts and structures for machinery and equipment, • Operate metalworking machinery that will include and not limited to: band saw, lathe and welder., • Count and maintain spare parts inventory, • Source parts when needed and follow mandated purchase order requirements, • Salary in accordance with experience level (see pay detail below), • Bonuses regularly based on Performance Enhancement Program (PEP) (see pay detail below), • Health Insurance, • Dental and Vision, • 401k, • Life Insurance, • PTO, • PPE providedRequirements:, • Must have mechanical knowledge with regards to motors, bearings, and gears., • Basic understanding of electrical circuits and power requirements., • Welding and fabrication skills, • Knowledge of proper safety requirements, • Basic computer skills

Job Description We are seeking an experienced Pipe Fitter Welder Combo to install, assemble, and maintain piping systems for commercial and industrial applications. The ideal candidate will have experience working with various piping materials and ensuring high-quality installations that comply with industry standards and regulations. Key Responsibilities: • Install, inspect, and repair piping systems, including water, gas, and industrial piping., • Cut, thread, weld, and assemble pipes using various tools and techniques., • Read and interpret blueprints, schematics, and specifications to determine the layout and installation of piping systems., • Ensure compliance with safety regulations, industry codes, and project requirements., • Test piping systems for leaks using pressure gauges and other testing equipment., • Work closely with other trades, including welders, plumbers, and general contractors., • Maintain an organized and safe work environment, adhering to OSHA standards., • Train and mentor apprentices and junior pipe fitters., • Weld - Mig, Tig, Stick exp neededQualifications:, • High school diploma or equivalent., • Minimum of 3-5 years of experience in pipe fitting and welding for commercial or industrial projects., • Ability to read and interpret blueprints, technical drawings, and piping schematics., • Experience working with a variety of pipe materials, including steel, copper, and PVC., • Proficiency in using pipe fitting tools, including cutting, threading, and welding equipment., • Strong problem-solving and troubleshooting skills., • Ability to lift and carry heavy materials and work in various environmental conditions., • Valid driver’s license with a clean driving record., • Ability to pass background check and drug screening.Preferred Skills:, • Certification in pipe fitting or welding., • Experience with industrial piping systems and HVAC piping., • Strong communication and teamwork skills., • Ability to work independently and manage multiple projects. (Pay is based on experience) Apply Now to get in contact with a recruiter!

Job Description We are seeking a Hollow Metal Shop Welder to become an integral part of our team! The Welder will use specialized equipment to weld and assemble new metal forms. Responsibilities: • Manufacture and fabricate finished metal products, • Install and repair various equipment and components, • Follow blueprints to meet product specifications, • Calculate material measurements to verify specifications, • Previous experience in welding, manufacturing, or other related fields, • Familiarity with welding tools and procedures, • Familiarity with engineering blueprints and schematics, • Ability to handle physical workload

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: • Read blueprints and other customer specifications/drawings., • Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG)., • Minimum 8 years of naval/commercial welding experience., • Must have reliable transportation., • Familiar with OSHA regulations relative to the shipbuilding industry., • Pass hair follicle test and background check., • Comfortable with heights and in confined spaces., • Lift 50lbs without assistance., • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job DescriptionImmediately hiring MIG Welders for a large shop in Floresville. The ideal candidate will have a strong background in MIG welding, particularly in a manufacturing shop environment. Pay is up to $22/hr. to start based on experienceShift is Mon-Fri 7am-5pm (early out at 4pm on Fri), Saturdays for OT MIG Welder Duties: • MIG Welding, • Welding tanks in a shop, • Structural welding, • Must be able to weld on carbon steel, • Machine and equipment operating, • Operate overhead crane in shop to move material, • Repair, maintain, and rebuild, • Fabrication in shop, • Use grinder and cutting torch as needed, • Interpret blueprints, technical drawings, and welding symbols to accurately perform welds, • Inspect completed welds for strength, appearance, and conformance to industry standards, • Assemble and fit fuel tank components, ensuring proper alignment and secure welds for leak-proof, durable tank constructionRequirements:, • Looking for at least 3 yrs. MIG welding experience, • Ability to fabricate metal in shop, • Solid understanding of welding techniques, safety standards, and welding symbols, • Ability to work in physically demanding environments, including standing for extended periods and lifting heavy materials, • Ability to use additional tools and equipment such as grinders and cutting torches, • Weld test will be conductedPlease call 210-664-2680#vipstaffing#zrsat

Job DescriptionDescription: Duties and Responsibilities • Cutting and joining metal parts for fabricating or repairing vehicle equipment, tools and various other articles, applying tools like stick., • Designing and fabricating the equipment and parts for meeting the special or unusual needs, using the manufacturer specifications, calculator, measuring devices, drawings etc., • Installing or removing any special equipment like paint machine, grinder, power and hand tools etc., • Designing and creating holding jigs that aid in fabrication of the parts in various numbers., • Maintaining a record of all the work completed so as to facilitate the accounting activities., • Knowledge of the properties and characteristics of metals used for cutting, welding and forming objects and of various welding fluxes and rods., • Knowledge of safety precautions related to occupational hazards, procedures and practices of the trade., • Skilled in identifying the proper power and hand tools in the safest possible manner and various equipment. Entry level welder fabricators are expected to pass relevant technical exams in the field. Basic mathematics skills Basic knowledge of welding symbols and blueprint reading skills. Ability to work with complicated welding tools like ox-fuel, plasma, mag-drills, chainsaws etc. Requirements:

Job Description We are seeking experienced TIG Combo Welders for new commercial construction projects in the San Antonio, Texas area. The ideal candidate will be skilled in both TIG (GTAW) and stick (SMAW) welding processes with the ability to perform high-quality welds on piping and structural components in various positions. Responsibilities: • Perform TIG root passes and stick fill/cap passes on structural steel., • Read and interpret blueprints, weld symbols, and project specifications., • Prepare fit and weld materials including carbon steel and stainless steel., • Ensure welds meet project standards, codes and safety requirements., • Must have own tools, • 3 plus years combo welding in a commercial setting., • Abilit to weld pipe in multiple positions (5G, 6G preferred). Equal Opportunity Employer

Job Description Job Summary: The Shop Welder Tech 1 (Line Bore), performs basic welding repairs and fabrication utilizing Holt, Caterpillar and AWS Welding Procedures, Standards and Codes. Demonstrating competency with a cutting torch, air arc, and hand tools. In addition, this position will be introduced to the line bore tooling and process. The incumbent in this position shall model the following practices daily: 1)Demonstrate alignment with the company's mission and core business values; 2) Collaborate with key internal/external resources; 3) Participate in ongoing self-development. Essential Functions: • Models, promote, and reinforce the consistent use of HOLT’s Values Based Leadership (VBL) tools, models, and processes to ensure alignment with our Vision, Values, and Mission., • Performs basic welding repairs/fabrication on heavy equipment and components in a shop environment., • Utilizes layout/fitup tools, grinders, sanders, tape measure, blueprints, drawings as well as adhering to all welding processes., • Performs basic carbon arc gouging, oxy/acetylene torch cutting/gouging and welding on various types of materials., • Ensures all welding work is compliant with specific welding codes, procedures, and quality standards., • Works overtime as required by workload and customers’ needs., • Learns machining capabilities to perform to line-bore components effectively., • Performs electronic inspection reports using portable electronic devices., • Searches parts on the computer in SIS, and orders parts electronically., • Accurately prepares technical inspection/service reports, documents, and any other necessary paperwork to complete the job., • Assists with the removal and installation of heavy equipment components., • Performs maintenance on company equipment and tooling associated with their area of job responsibilities., • Pursues on-going self-development, classroom training and on-the-job training., • Works safely at all times while consistently adhering to company policies, procedures and standards internally as well as externally when representing our organization., • Ability to complete basic welding repairs utilizing FCAW process (all positions) and perform basic torch work, cutting and gouging., • Knowledge of equipment and dimensional tools, including their designs, uses, repair and maintenance., • Knowledge of specification and drawing interpretations., • Knowledge with current computer software, related hardware, and machine electronic systems., • Good work habits, accuracy and an exceptional attention to detail and quality of work., • Developing technical skills to become a qualified welder and fabricator with a demonstrated ability to effectively perform assigned welding tasks., • Demonstrated verbal and written communication skills., • Developing influencing skills and problem-solving skills with a developing mechanical aptitude., • Adaptable to changing schedules and exhibits time management skills., • Ability to follow logical troubleshooting and standard operating procedures when performing welding fabrication and repairs., • Ability to work independently and as part of a team with a strong work ethic being dependable, reliable, and honest with demonstrated integrity., • Ability to follow manufacturer and company installation and service guidelines to ensure quality work., • Ability to operate hand tools, power tools, pneumatic tools, and equipment used in fabrication and welding., • Required to be a self-starter., • Ability to read, write, understand information, follow directions and procedures., • DiSC and Conflict Resolution, • Blueprint Basics, • Safety training and task training, • Welding certification: FCAW 1” A-36 plate, 3G and 4G position., • GTAW 3G/4G, • High school diploma or equivalent required; with additional specialized/technical training or some college courses (Welding Technology) preferred, • Up to one year of experience preferred, • Ability to function, work around and with welding machines, overhead cranes, cutting torches and gauges, fit up and layout tools, forklifts and material handling equipment, hand grinder/sander and air tools., • Ability to move objects and use abdominal and lower back muscles to provide support over time without fatigue., • Moves materials weighing up to 50 lb., anything more requires a team lift, or a mechanical lift., • Constant movement and use of limbs; this position requires good manual dexterity, coordination, and stamina., • Ascends/descends with gradual or continuous progress by oneself using hands/feet while maintaining at least three points of contact to climb up/down ladders and/or equipment., • Be able to maneuver safely and work underneath equipment., • Routinely reacts to visual, auditory, and other signals, including alarms and instructions, and is required to visually inspect work., • Requires the use of common protective or safety equipment., • Regularly works outdoors around moving mechanical parts and noise level may be loud at times., • May be exposed to weather extreme when working outside in conditions that include inclement weather, heat, cold, and moisture/humidity., • Exposure to small quantities of chemicals, dust, steam, high-pressure water, and high-speed rotating equipment., • Occasionally performs work in cramped spaces and/or high places., • Occasionally interact with internal/external customers, vendors, and outside organizations. Disclaimer: Please note that the above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not to be interpreted as an exhaustive list of all responsibilities, duties, and skills required of the incumbents so classified. All incumbents may be required to perform duties outside of their normal responsibilities, as needed. #LI-HCT LI-JH1 #CAT #CATERPILLAR #LINEBORING #HOLTCAT

Job Description This is an excellent opportunity to use your experience in the welding and skilled trades fields to teach others seeking education and training. No previous teaching experience required but must be a certified or licensed Welder and experienced (see below requirements) JOB SUMMARY Instructors are responsible for teaching students in our training programs in classroom and hands-on lab settings, ensuring that they gain the knowledge and skills that are required for entry-level employment in their chosen field. Instructors are also responsible for sound educational practices and the academic development of each student. Instructors will also manage their classroom environment and promote a positive and engaging learning experience, provide support, tutoring and other assistance as needed. Instructors are to “model" the professional behaviors, language, and activities expected of our students. ESSENTIAL FUNCTIONS • Utilize classroom and lab instruction, student assessment mechanisms, and classroom management techniques to provide an engaged classroom experience to students., • Ensure that each student has been presented with the material to successfully meet the learning objectives of each course within a student’s program of study, • Ensure that instructional materials and equipment are ready for student use, sufficient in quantity, are properly maintained and are in working order prior to class time, • Participate in ongoing faculty assessment and professional development activities to ensure an active and engaged classroom experience for all students; maintain required certification and license, • Actively participate in meetings, review and analyze assessment data, compile reports, and meet academic and administrative deadlines, • Ensure campus compliance with all federal, state, and regulatory bodies’ guidelines, along with internal policies of the company, • Other duties as assigned MINIMUM REQUIREMENTS • High school diploma, GED, and/or proof of completion of related vocational training program., • Verifiable work experience including a minimum of five years verifiable welding industry experience within the last ten years, • Must be certified or licensed where required by law, • Strong written, oral, and interpersonal communication skills with demonstrated success in collaborating with diverse groups of employees and customers, • Demonstration of highest levels of integrity and professionalism in all aspects, including appearance, demeanor, and attitude, • Ability to work in an observation/coaching style environment, • Capability to prioritize, accept responsibility, and work within deadlines, • Superior organizational and problem-resolution skills, • Demonstrated commitment to customer service, • Previous experience teaching in an education setting and/or experience with training employees within the industry, • Demonstrate knowledge of federal, state, and accreditation regulations applicable to the proprietary education industry Ancora Education is committed to creating a diverse and inclusive work environment. We are an equal opportunity employer that maintains a policy of nondiscrimination with respect to all employees and applicants for employment. All employment decisions are made without regard to individual's age, race, color, religion or creed, national origin or ancestry, sex (including pregnancy), sexual orientation, gender, gender identity, physical or mental disability, veteran status, genetic information, ethnicity, citizenship, or any other characteristic protected by law.