Welder jobs in Seattle, WashingtonCreate job alerts

Job Description The Machinists Institute (MI) is a 501c3 nonprofit established by the International Association of Machinists & Aerospace Workers District 751. MI provides world-class training for current and future aerospace, automotive, and manufacturing workers, focusing on living-wage career opportunities through advanced education and training. The Contract Certified Welding Inspector (CWI) – WABO Testing Administrator will administer and supervise WABO (Washington Association of Building Officials) welding performance qualification tests, ensuring compliance with WABO Welding Manual and test procedures. Location: Tukwila, WA Reports to: Welding Program Director Essential Duties and Responsibilities • Administer and supervise WABO welding performance qualification tests in accordance with WABO Welding Manual and test procedures., • Verify welder eligibility and confirm required documentation prior to testing., • Conduct pre-test safety briefings and ensure a safe and compliant test environment., • Inspect test materials, equipment, and consumables for compliance with specifications., • Monitor welders during testing to ensure adherence to specified techniques and procedures., • Visually inspect welds and coordinate non-destructive or destructive testing as required., • Accurately document and certify test results; submit required reports and records to the WABO Certification Program., • Maintain confidentiality and impartiality throughout the testing and certification process., • Current AWS Certified Welding Inspector (CWI) certification., • Current WABO Welding Test Supervisor (WTS) or Test Site Technician (TST) credential preferred (or ability to obtain prior to assignment)., • Minimum 1–3 years of relevant welding inspection experience., • Demonstrated knowledge of AWS D1.1 and WABO Welding Certification standards., • Strong communication and organizational skills., • Ability to work independently and maintain accurate, timely records. Equal Opportunity Employer The Machinists Institute is an equal opportunity/affirmative action employer with a strong commitment to diversity and inclusion. We prohibit discrimination on the basis of any and all legally protected status. Background Check Employment in this position is contingent upon consent to and successful completion of a pre-employment background check. Contract Terms Compensation: $65/hr Duration: Contract basis with potential for renewal based on demand and performance. Schedule: Flexible/as needed based on testing dates and candidate availability.

Job Description Travel Mig Aluminum Welder- Vancouver, Washington Job Description: Are you a skilled welder with a passion for travel and aluminum welding? We are looking for an experienced Travel Welder to join our team. If you have significant experience in aluminum welding, can describe your experience, and pass a weld test, we want to hear from you! Pay: 30/HR Starting + 150 a day per diem (7 days but must work all assigned shifts to receive 7 days) Shift: 4X10’s M-Thursday (6am-4:30pm) Responsibilities: Weld and fabricate aluminum components according to specific instructions. Perform welding tasks in various positions. Read and interpret blueprints for welding and fabrication tasks. Pass fracture-tested weld tests. Utilize MIG welding techniques and, preferably, pulse arc techniques. Essential Skills: Experience in aluminum welding. Proficiency in MIG welding. Ability to weld in multiple positions. Blueprint reading skills. Capability to pass fracture-tested weld tests. Additional Skills & Qualifications: Experience with pulse arc welding. Familiarity with fitting, grinding, and tape measure usage. Weld Test: Weld test at Vancouver facility Running uphill beads in 3G and 4G Aluminum weld test using MIG 3/64th wire to D1.2 standard (Pulse). Weld together 5" long aluminum plates or coupons that is 3/8ths thick and there is no back-end strip and gouge it is just a v-groove and open back. Visual test and break test to failure. Spool gun Why Work Here? Join us for long-term employment stability as we work on the Maneuver Support Vessel (MSV) project, constructing 32 ships over the next 10 years. This is an excellent opportunity for candidates seeking a stable company with guaranteed work. We are open to candidates willing to permanently relocate. Work Environment: You will be working in a large-scale manufacturing environment that produces structural steel and aluminum parts for government projects, including bridges, dams, nuclear sites, boats, and barges. The shop is clean and primarily focused on aluminum work. Employees are required to wear steel-toed boots and safety glasses. Fast track application by booking a meeting with recruiter Schmildt: Pay and Benefits The pay range for this position is $30.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Seattle,WA. Application Deadline This position is anticipated to close on Oct 22, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matter Powered by JazzHR jmFvpHLBAl

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Pipe Welders in Sturgeon Bay, WI! Pay Rate: $40/hour and $660/week per diem Job Description: • Read blueprints and other customer specifications/drawings., • Carbon 309 Stainless Steel Wired 20 Copper Nickel (TIG)., • Minimum 8 years of naval/commercial welding experience., • Must have reliable transportation., • Familiar with OSHA regulations relative to the shipbuilding industry., • Pass hair follicle test and background check., • Comfortable with heights and in confined spaces., • Lift 50lbs without assistance., • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Job DescriptionSteel Fabrication company in South Seattle seeks a hardworking, dependable lead fitter/fabricator. This is not an entry level position. Applicant must have a minimum of 3 years’ experience as a fitter, not a welder. Our company works exclusively in hot-rolled steel, specializing in structural work. Our scope of work includes structural beams and columns, canopies, stairs, embeds, and handrail. Applicant must possess the following:· WABO D1.1 FCAW certification.· WABO D1.1 GMAW certification (preferable but not necessary).· Ability to read and comprehend steel fabrication drawings.· Ability to perform layout on a large scale: fitting steel beams and columns with great accuracy· Ability to perform multi-pass, structural welds.· Understanding of Pre-Qualified welding procedures.· Understand and comply with supervisors’ direction and company safety policies.· Work reasonably and safely with other welders/fitters in the company.· Proficient with ironworking tools and equipment: oxy-fuel torches, plasma cutter, grinders, bandsaws, ironworker, notchers, presses, drills, taps, pneumatic tools, overhead cranes, rigging, forklifts, etc.…· Be available from 6am-2:30pm, 5 days a week.· Have reliable transportation to the Seattle Area Benefits:Competitive hourly wageMedical and dental benefitsPaid holidayPTO (accruing each week)401K participation This is a full-time day shift positionM-F 6am-2:30pmOvertime at time and a half pay.Compensation is dependent on experience, with a review after a 90-day period.Must be US work eligible and drug free.To apply, please respond to this ad, along with a resume or list of recent work history E04JI800qsf3401ij3y

Job Description Overview Tradesmen International is immediately hiring experienced Marine Pipe Welders for a project located in and around Freeland, WA. This is a first shift opportunity with a pay range of up to $36/hour based on experience plus $164/Per Diem to travelers 60+ miles from the job site. If you are a TIG welder and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: • Preparation and layout, • Read and interpret blueprints, weld symbols, drawings and piping schematics, • Prepare and align pipe joints for welding, beveling, cleaning, fitting and tack welding, • Select correct filler metals, consumables and welding processes, • Welding fabrication, • Perform welding on a variety of piping systems, fuel, lube oil, hydraulics, fire main, potable water and steam, • SMAW, stick, GTAW, TIG, GMAW, MIG and FCAW Fluxcore, • Installation, repair and weld pipe spools, flanges, brackets and support for shipboard systems, • Repair cracked, damaged or corroded piping and fittings, • Perform hot-work aboard vessels, • Inspection, testing and conduct visual inspections of welds for defects, • Prepare welds for non-destructive testing such as xray, dye penetrant, ultrasonic or magnetic particle inspection, • Repair and/or re-weld as necessary Responsibilities • Minimum of 3+ years of Marine Welder experience Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance Tradesmen International is an EO employer - M/F/Veteran/Disability Click here to visit Tradesmen’s full website.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices nationwide. We partner with businesses and jobseekers to place qualified individuals efficiently. Currently, CTS is reviewing resumes for Structural Welders in Sturgeon Bay, WI! Pay Rate: $30/hour and $660/week per diem Job Description: • Complete fillet and butt welds using the SMAW, GMAW, FCAW, and GMAW-P process (multi-pass) in 2G, 3G, and 4G positions., • Heat oxygen/propane heating torch., • Perform grinding and pick up work as needed., • Complete air carbon arc gouging., • Properly use fillet and butt gauges., • Minimum 8 years of naval/commercial welding experience., • Successfully pass several tests over a three-week period., • Must have reliable transportation., • Familiar with OSHA regulations relative to the shipbuilding industry., • Pass hair follicle test and background check., • Comfortable with heights and in confined spaces., • Lift 50lbs without assistance., • Must understand the layout of the ship and compartment identification., • Basic reading, writing and math skills required. CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Voluntary Life/Voluntary AD&D, • Short-Term Disability, • Long-Term Disability, • Hospital Indemnity, • Accident, • Critical Illness Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Auto Body Technician $28-$32 Flat Rate Depending on Experience Classic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Be a part of a rapidly growing company whose mission is to put safety, quality, integrity, and heart into every vehicle we repair and customer we serve. Classic Collision offers competitive pay, benefits, and career advancement opportunities. Please come and join our team! Why Choose Classic Collision? • Paid Weekly, • Continuous Training, • Supportive Team Culture, • Company match 401K, • Medical/Dental/Vision, • Paid Time Off - 6 Paid Holidays, • Rewarding Work Responsibilities • Complete disassembly of vehicle to assist Collision Estimators in assessing damage to prepare a 100% Repair Plan, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Plan work procedure: follow work order for all operations listed, • Remove upholstery, accessories, electrical and hydraulic windows, and seat operating equipment to gain access to damaged area of vehicle if needed. Store parts on carts or cover to eliminate potential damage, • Mend damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged panels and bolts or welds replacement parts in position and reassemble after parts are painted, • Operate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.), • File, grind, and sand repaired surfaces before turning vehicle over to the Paint Dept., • Repair or replace defective parts, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Inspect and test drive repaired vehicles to check for compliance with safety and quality standards, • Perform other related duties as assigned, • Comply with all Classic Collision standard operating procedures, safety, rules, and guidelines Qualifications • Must be at least 18 years of age, • I-CAR / ASE certifications preferred, • 2-3 years’ collision repair experience preferred, • Valid Driver's License Required, • Customer-focused attitude with the ability to work well in a team environment, • Ability to read and comprehend written instructions and information, • Successful completion of background check required Behaviors/Competencies: • Integrity-Respect and accountability at every level and every interaction, • Customer Service-Provide the highest level of customer service while building customer satisfaction and retention, • Innovation-Develops and displays innovative approaches and ideas to our business, • Teamwork-Contributes to building a positive team spirit and supports everyone’s efforts to succeed Physical & Environmental While performing the duties of this job, the employee is regularly required to use hands, and is required to talk and hear. The employee is frequently required to stand, sit, and walk occasionally for long periods at a time. The employee may occasionally be required to reach with hands, arms and move objects up to 20 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and ability to adjust focus. In addition, abilities for assessing the accuracy, neatness and thoroughness of the work assigned is required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential function. Classic Collision is an Equal Opportunity Employer: As an equal opportunity employer, Classic Collision does not discriminate against any employee or candidate based on age, race, gender identity, gender expression, genetic information, national origin, physical or mental disability, protected veteran status, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by all applicable federal, state, and local laws. Reasonable Accommodations: Classic Collision is an equal opportunity employer that is committed to working with and providing reasonable accommodations to individual with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or submit an online application, please e-mail or call (470)500-6808. This email and phone number are listed exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. This job description is not a complete statement of all duties and responsibilities comprising the position. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the ___ notice from the Department of Labor.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description Job title: Structural Welder Reports to: Production Superintendent Pay Range: $28.00 - $36.00 Hourly DOE Job Overview:Responsible for welding of steel, aluminum and stainless-steel materials using the SMAW, GTAW and/or GMAW processes in all positions. Required to perform miscellaneous tasks, as assigned by his or her supervisor. Education: High school graduate, or GED Responsibilities: • Ensure work is done safely and meets quality standards, • Set up welding machines based on the job at hand or using a Welding Procedure Specification, • Must have own basic skill related tools and equipment if not supplied by the workplace, • Weld steel, aluminum and stainless steel components based on the required weld processes and parameters, • Adhere to the specific welding procedure specifications, • Set up welding cells for serial production runs, • Keep work areas clean and organized and take proper care of all equipment and facilities, • Follow all company rules and policies, • Provide a great level of attention to detail and focus on the given task, • Follow all safety rules and quality standards, • Work with team members to maximize productivity and efficiency, • Assist in the preparation of product for shipment, • Report any unsafe work conditions or practice to supervisor, • Six months to one-year related experience and/or training, • Experience with steel, aluminum and/or stainless steel required, • Experience with SMAW, GTAW and GMAW welding highly preferred, • Ability to follow instructions given both verbally and in written form, • Willingness to learn and work to the best of his/her abilities and have a dependable work ethic, • Knowledge of welding equipment and associated tooling including proper set up and use, • Ability to read and interpret documents furnished in written, oral, diagram or schedule form including but not limited to safety rules, operating and maintenance instructions, quality manuals and procedure manuals, • Familiarity with the metric system, • Ability to stand continuously for long periods of time, • Willing to work 40+ hours a week, • Pass substance abuse testing, • \nReasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions.\n\n Location Seattle, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: Aluminum Pulse Mig Welder REPORTS TO: Superintendent PAY RANGE: $25.00 - $35.00/hourly DOE SUMMARY The Pulse Mig Aluminum Structural Welder is responsible for performing welding tasks on aluminum materials using the Pulse Mig process in all positions. This role also includes handling miscellaneous tasks as assigned by the supervisor. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Prioritize safety and adhere to quality standards during all aluminum welding operations., • Configure welding machines according to job requirements or Welding Procedure Specifications for pulse mig aluminum welding., • Utilize personal basic tools and equipment for welding tasks if not provided by the workplace., • Perform aluminum welding based on the required Pulse Mig process and parameters., • Strictly follow welding procedure specifications for Pulse Mig aluminum welding., • Prepare and set up welding cells for serial production runs of aluminum components., • Maintain cleanliness and organization of work areas while ensuring proper care of equipment and facilities., • Adhere to all company policies and rules., • Demonstrate keen attention to detail and focus on assigned tasks., • Comply with safety regulations and maintain high-quality standards., • Collaborate with team members to enhance productivity and efficiency., • Assist in preparing aluminum products for shipment., • Report any hazardous work conditions or practices to the supervisor., • Ability to understand and follow both verbal and written instructions., • A willingness to learn and display a dependable work ethic., • Knowledge of welding equipment, including proper setup and usage for aluminum pulse mig welding., • Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals., • Familiarity with the metric system., • Capable of standing continuously for extended periods., • High school graduate or GED, • 2 years of relevant experience in aluminum welding., • May be made to enable qualified individuals with disabilities to perform essential job functions.\n Location Seattle, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Job Details Job Location SEA - Seattle, WA Position Type Full Time Salary Range $24.00 - $35.00 Hourly Job Shift Day Description Founded in 1995, National Products began supplying the world with our industry leading RAM Mounting Systems. Relied on by the world's most rugged industries, we serve motorcycle riders, kayak fishermen, police, farmers, pilots, extreme sports enthusiasts and others with mounting solutions for high vibration environments. We manufacture mounts for action cameras, tablets, phones, and other displays across nearly every mobile market. Made in the USA, we are proud to offer a lifetime warranty on most products. Job Description As a Welder, you will be responsible for performing MIG, TIG, and/or Stick welding on metal components and assemblies. You will use a wide range of fabrication tools and equipment to ensure strong, precise welds that meet customer and company standards. Duties and Responsibilities \n • Weld components in flat, vertical, or overhead positions\n, • Select equipment and plans layout, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage, and welding techniques\n, • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers\n, • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications\n, • May operate fabrication equipment such as CNC torch, CNC anglematic, CNC fabripunch, and other component production equipment\n, • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys\n, • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits\n, • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding\n, • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals\n, • Clean laser beds and assist the operators and shop as needed.\n\n Qualifications Skills and Qualifications \n • 2+ years of welding experience in a fabrication or manufacturing environment.\n, • Proficiency with MIG, TIG, laser welding; Stick welding a plus.\n Benefits: \n • Employer paid Medical, Dental, Vision, and Life Insurance\n, • 69.33 hours of PTO (up to 3 weeks with tenure) with seven paid holidays\n, • 401k with up to 4% employer match\n, • Additional paid parental leave beyond state/federal offerings\n, • Quarterly catered lunch events for all employees\n NPI maintains a drug free workplace policy and conducts pre-employment testing in compliance with Washington SB 5123.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: Aluminum TIG Welder REPORTS TO: Production Superintendent PAY RANGE: $25.00 - $35.00/hourly DOE SUMMARY The Aluminum Structural Welder is responsible for performing welding tasks on aluminum materials using the GTAW (Gas Tungsten Arc Welding) process in all positions. This role also includes handling miscellaneous tasks as assigned by the supervisor. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Prioritize safety and adhere to quality standards during all aluminum welding operations., • Configure welding machines according to job requirements or Welding Procedure Specifications for GTAW aluminum welding., • Utilize personal basic tools and equipment for welding tasks if not provided by the workplace., • Perform aluminum welding based on the required GTAW process and parameters., • Strictly follow welding procedure specifications for GTAW aluminum welding., • Prepare and set up welding cells for serial production runs of aluminum components., • Maintain cleanliness and organization of work areas while ensuring proper care of equipment and facilities., • Adhere to all company policies and rules., • Demonstrate keen attention to detail and focus on assigned tasks., • Comply with safety regulations and maintain high-quality standards., • Collaborate with team members to enhance productivity and efficiency., • Assist in preparing aluminum products for shipment., • Report any hazardous work conditions or practices to the supervisor., • Ability to understand and follow both verbal and written instructions., • A willingness to learn and display a dependable work ethic., • Knowledge of welding equipment, including proper setup and usage for aluminum GTAW welding., • Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals., • Familiarity with the metric system., • Capable of standing continuously for extended periods., • High school graduate or GED, • Six months to one-year of relevant experience and/or training in aluminum welding., • May be made to enable qualified individuals with disabilities to perform essential job functions.\n Location Seattle, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

About the Organization IMIA,LLC is the only national marine surface preparation painting contractor servicing every U.S. Port with a mobile full time workforce that ensures that a quality product is delivered on time every time. IMIA, LLC has the equipment, seasoned deckplate supervision and mechanics, as well as rigorous corporate safety and quality programs and financial strength to support our customer's preservation needs in a truly superior and comprehensive fashion. IMIA, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: • Health, • Dental, • Vision, • Life, • LTD, • Accident, • Critical Illness, • 401k Employees and their household members are also eligible to participate in the company's Employee Assistance Program. Per Diem OR Dislocation Allowance may be provided to eligible employees to reimburse some or all of the cost an employee might be reasonably expected to incur for lodging, meals, and incidental expenses while traveling out of town for work. EOE Statement IMIA, LLC is an equal opportunity employer and provides equal employment opportunities (EEO) to all employees regardless of race, color, religion, gender, gender identity or expression, national origin, sexual orientation, age, sex, disability status, marital status, status as a covered veteran, genetics, or any other protected groups under state, federal or local Equal Opportunity Laws. This policy applies to all terms and conditions of employment including but not limited to hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. Description JOB TITLE: Aluminum Pulse Mig Welder REPORTS TO: Superintendent PAY RANGE: $25.00 - $35.00/hourly DOE SUMMARY The Pulse Mig Aluminum Structural Welder is responsible for performing welding tasks on aluminum materials using the Pulse Mig process in all positions. This role also includes handling miscellaneous tasks as assigned by the supervisor. ESSENTIAL DUTIES & RESPONSIBILITIES Responsibilities also include but are not limited to: • Prioritize safety and adhere to quality standards during all aluminum welding operations., • Configure welding machines according to job requirements or Welding Procedure Specifications for pulse mig aluminum welding., • Utilize personal basic tools and equipment for welding tasks if not provided by the workplace., • Perform aluminum welding based on the required Pulse Mig process and parameters., • Strictly follow welding procedure specifications for Pulse Mig aluminum welding., • Prepare and set up welding cells for serial production runs of aluminum components., • Maintain cleanliness and organization of work areas while ensuring proper care of equipment and facilities., • Adhere to all company policies and rules., • Demonstrate keen attention to detail and focus on assigned tasks., • Comply with safety regulations and maintain high-quality standards., • Collaborate with team members to enhance productivity and efficiency., • Assist in preparing aluminum products for shipment., • Report any hazardous work conditions or practices to the supervisor., • Ability to understand and follow both verbal and written instructions., • A willingness to learn and display a dependable work ethic., • Knowledge of welding equipment, including proper setup and usage for aluminum pulse mig welding., • Proficient in reading and interpreting documents presented in written, oral, diagram, or schedule form. This includes safety rules, operating and maintenance instructions, quality manuals, and procedure manuals., • Familiarity with the metric system., • Capable of standing continuously for extended periods., • High school graduate or GED, • 2 years of relevant experience in aluminum welding., • May be made to enable qualified individuals with disabilities to perform essential job functions.\n Location Seattle, WA Salary Range Exempt/Non-Exempt Non-Exempt This position is currently accepting applications.

Job Details Job Location SEA - Seattle, WA Position Type Full Time Salary Range $24.00 - $35.00 Hourly Job Shift Day Description Founded in 1995, National Products began supplying the world with our industry leading RAM Mounting Systems. Relied on by the world's most rugged industries, we serve motorcycle riders, kayak fishermen, police, farmers, pilots, extreme sports enthusiasts and others with mounting solutions for high vibration environments. We manufacture mounts for action cameras, tablets, phones, and other displays across nearly every mobile market. Made in the USA, we are proud to offer a lifetime warranty on most products. Job Description As a Welder, you will be responsible for performing MIG, TIG, and/or Stick welding on metal components and assemblies. You will use a wide range of fabrication tools and equipment to ensure strong, precise welds that meet customer and company standards. Duties and Responsibilities \n • Weld components in flat, vertical, or overhead positions\n, • Select equipment and plans layout, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage, and welding techniques\n, • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers\n, • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications\n, • May operate fabrication equipment such as CNC torch, CNC anglematic, CNC fabripunch, and other component production equipment\n, • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys\n, • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits\n, • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding\n, • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals\n, • Clean laser beds and assist the operators and shop as needed.\n\n Qualifications Skills and Qualifications \n • 2+ years of welding experience in a fabrication or manufacturing environment.\n, • Proficiency with MIG, TIG, laser welding; Stick welding a plus.\n Benefits: \n • Employer paid Medical, Dental, Vision, and Life Insurance\n, • 69.33 hours of PTO (up to 3 weeks with tenure) with seven paid holidays\n, • 401k with up to 4% employer match\n, • Additional paid parental leave beyond state/federal offerings\n, • Quarterly catered lunch events for all employees\n NPI maintains a drug free workplace policy and conducts pre-employment testing in compliance with Washington SB 5123.

Job Details Job Location SEA - Seattle, WA Position Type Full Time Salary Range $24.00 - $35.00 Hourly Job Shift Day Description Founded in 1995, National Products began supplying the world with our industry leading RAM Mounting Systems. Relied on by the world's most rugged industries, we serve motorcycle riders, kayak fishermen, police, farmers, pilots, extreme sports enthusiasts and others with mounting solutions for high vibration environments. We manufacture mounts for action cameras, tablets, phones, and other displays across nearly every mobile market. Made in the USA, we are proud to offer a lifetime warranty on most products. Job Description As a Welder, you will be responsible for performing MIG, TIG, and/or Stick welding on metal components and assemblies. You will use a wide range of fabrication tools and equipment to ensure strong, precise welds that meet customer and company standards. Duties and Responsibilities \n • Weld components in flat, vertical, or overhead positions\n, • Select equipment and plans layout, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage, and welding techniques\n, • Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers\n, • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications\n, • May operate fabrication equipment such as CNC torch, CNC anglematic, CNC fabripunch, and other component production equipment\n, • Weld separately or in combination, using aluminum, stainless steel, cast iron, and other alloys\n, • Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits\n, • Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding\n, • Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals\n, • Clean laser beds and assist the operators and shop as needed.\n\n Qualifications Skills and Qualifications \n • 2+ years of welding experience in a fabrication or manufacturing environment.\n, • Proficiency with MIG, TIG, laser welding; Stick welding a plus.\n Benefits: \n • Employer paid Medical, Dental, Vision, and Life Insurance\n, • 69.33 hours of PTO (up to 3 weeks with tenure) with seven paid holidays\n, • 401k with up to 4% employer match\n, • Additional paid parental leave beyond state/federal offerings\n, • Quarterly catered lunch events for all employees\n NPI maintains a drug free workplace policy and conducts pre-employment testing in compliance with Washington SB 5123.

Job Description AA Window and Gutter Cleaning has been serving the Seattle/Puget Sound area since 1985. Our company specializes in environmentally aware residential roof, window, and gutter cleaning. Our team holds each other to the highest standard when it comes to safety, customer service, and mastering our craft. Ultimately, we are interested in adding value to our customers in any facet we can. We have a robust medical, dental, and vision package with a competitive base and commission wages that are reflective of the amount of work you put in. Technicians who join us can expect opportunities for development in the following skills. • Safety Training (Fall protection, Harness, Ladders, Knots), • Roof, Gutter, and Window Cleaning, • Commercial Applicators Pesticide License, • Problem-solving and task prioritization, • Emerging Leader Training, • Detailed 1x1 training period and mentorship after training Outdoor Physical Work Performance Based Pay Paid Training Full Time Job Includes Company Issued Work Truck/Company paid Gas Company Issued iPhone Medical/Dental/Life Insurance 401(k) w/ no Vesting Period Paid Time Off Our employees come from a variety of backgrounds: painter, landscaper, roofer, framer, warehouse, arborist, mechanic, welder, carpenter, or anyone who loves physically demanding work, is comfortable with heights, and enjoys an honest day's work. Job Type: Full-time Pay: $28.00 - $40.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • 6 company paid holidays, • Flexible schedule, • Health insurance, • Health savings account, • Life insurance, • Paid time off, • Parental leave, • Professional development assistance, • Referral program, • Day shift, • Commission pay, • Signing bonus DOE, • RMP Bonuses #aawgtechnician

Are you an experienced welder with a passion for precision and quality? Do you take pride in your workmanship and have a keen eye for detail? If so, we want you to join our team! We are currently seeking a Structural Steel Welder to play a crucial role in constructing the future of our built environ

Newport Manufacturing, a metal fabrication job shop, is looking for a welder to join our team.

The Aluminum Structural Welder is responsible for performing welding tasks on aluminum materials using the GTAW (Gas Tungsten Arc Welding) process in all positions.

Newport Manufacturing, a metal fabrication job shop, is looking for a welder to join our team.