Trabajos welder en Memphis, TennesseeCrear alertas

• Skills to calibrate instrumentation preferred., • Install, start up, maintain, and shut down production equipment in accordance with company safety procedures for machine activation and shutdown and in line with OSHA requirements., • Carry out equipment set-ups to meet speed, production and quality targets., • Provide emergency/unscheduled repairs of production equipment during production and perform scheduled maintenance repairs during machine service., • Perform machinist duties and responsibilities., • Read and interpret equipment manuals and work orders to perform required maintenance and service., • Diagnose problems, replace or repair parts, test and adjust equipment as necessary to ensure good working order., • Complete and maintain company-required paperwork and maintenance records for identified equipment., • Perform preventative maintenance functions on machines, equipment and plant facilities, as directed., • Take part in projects to improve production equipment, the efficiency of equipment and set-ups., • Perform plumbing maintenance and carpentry functions., • Complete required general sanitation and housekeeping duties in all assigned areas., • Maintain tools in an orderly fashion and in a safe operating state., • Participate and comply in the various Quality System programs (GMP/Sanitation, HACCP, FSSC, ISO, Safety and Environmental regulations)., • Ensure food safety and quality., • Take an active part in the health and safety program and comply with the rules and policies in force., • Submit ideas for changes to avoid accidents., • Assist and/or provide back-up coverage for Maintenance Manager and/or Maintenance Supervisor., • Assist and/or provide back-up coverage for Instrumentation Electrician and/or Pipefitter/Welder, where applicable., • Modify PLC programs as required., • Read electrical and mechanical drawings., • Perform other work as assigned., • A minimum of two (2) years industrial maintenance experience, preferably within a fast-paced, production-driven food environment., • Ability to perform preventative maintenance, troubleshoot and/or repair pumps, valves, packaging machinery, clarifier/separators, agitators, and motors., • Troubleshooting skills and mechanical aptitude. A thorough knowledge of the special instruments used for diagnostic purposes., • Working knowledge of Microsoft Office applications and computerized "Work Order" systems., • Working knowledge of boilers, cooling towers, low and high air pressure blowers, and refrigeration compressors., • Able to work and troubleshoot electrical equipment., • Knowledge of programmable controllers and programming languages., • Experience reading electrical and mechanical plans., • Shifts are 6:00 a.m. to 6:00 p.m. and 6:00 p.m. to 6:00 a.m., • E&I (Electrical & Instrumentation) experience

Job Description Maintenance Certified Welder Buckman – Memphis, TN Location: Memphis, TN Language: English Travel: up to 5% Buckman is a privately held, global specialty chemical company with headquarters in Memphis, TN, USA, committed to safeguarding the environment, maintaining safety in the workplace, and promoting sustainable development. Buckman delivers exceptional service and innovative solutions to our customers globally in the pulp and paper, leather, and water treatment sectors to help boost productivity, reduce risk, improve product quality, and provide a measurable return on investment. Position Summary Performs certified welding and fabrication tasks to maintain, repair, and modify production and utility equipment in a batch specialty chemical plant. Ensures work is executed safely, efficiently, and in compliance with regulatory and quality standards. Key Outcomes/Responsibilities Outcome: Safe & Compliant Welding Execution Zero safety incidents; 100% compliance with permit-to-work and regulatory requirements. Actions: o Performs welding activities in accordance with ASME, AWS, and site-specific standards. Follows all safety protocols including hot work permits, PPE, and confined space entry. Outcome: High-Quality Fabrication & Repairs 95% first-pass quality rate; <5% rework due to weld defects Actions: o Fabricates and repairs piping, vessels, structural supports, and equipment components using appropriate welding techniques (e.g., TIG, MIG, Stick). o Conducts visual and dimensional inspections to ensure weld integrity. Outcome: Support for Preventive & Corrective Maintenance On-time completion of scheduled work; reduced downtime due to weld-related failures. Actions: o Executes welding tasks as part of planned maintenance and emergency repairs. Collaborates with planners and technicians to ensure readiness and alignment with production schedules. Outcome: Documentation & Traceability 100% documentation accuracy; audit-ready compliance. Actions: o Completes weld logs, inspection records, and job documentation as required by site protocols and regulatory standards. Maintains certification records and ensures qualifications are current. Outcome: Continuous Improvement & Reliability Support Contribution to ≥1 improvement initiative per quarter; reduction in recurring weld-related failures. Actions: o Identifies opportunities to improve weld techniques, material selection, and fabrication methods. Participates in root cause analysis and reliability improvement initiatives. Basic Qualifications · Education Requirements: High School Diploma or equivalent · Job Experience:4 - 6 years · Technical Skills: Proficiency in TIG, MIG, Stick welding; pipe fitting; blueprint reading; weld inspection • Safety Knowledge: Familiarity with hot work permitting, confined space entry, and hazardous materials handling, • Systems: Basic CMMS usage for work order documentation (e.g., SAP PM) Competencies · Collaborates - Building partnerships and working collaboratively with others to meet shared objectives · Communicates Effectively - Developing and delivering multi-mode communications that convey a clear understanding of the unique needs of different audiences · Manages Complexity - Making sense of complex, high quantity, and sometimes contradictory information to effectively solve problems · Plans and Aligns - Planning and prioritizing work to meet commitments aligned with organizational goals · Action Oriented - Taking on new opportunities and tough challenges with a sense of urgency, high energy, and enthusiasm We appreciate the interest of recruitment partners, but we are not engaging external agencies for this role. #LI-TF1 #LI-Onsite Company DescriptionBuckman is a privately held, global specialty chemical company with headquarters in Memphis, TN, USA, committed to safeguarding the environment, maintaining safety in the workplace, and promoting sustainable development. Buckman delivers exceptional service and innovative solutions to our customers globally in the pulp and paper, leather, and water treatment sectors to help boost productivity, reduce risk, improve product quality, and provide a measurable return on investment.Buckman is a privately held, global specialty chemical company with headquarters in Memphis, TN, USA, committed to safeguarding the environment, maintaining safety in the workplace, and promoting sustainable development. Buckman delivers exceptional service and innovative solutions to our customers globally in the pulp and paper, leather, and water treatment sectors to help boost productivity, reduce risk, improve product quality, and provide a measurable return on investment.

Job DescriptionDescription: We are seeking an experienced Welder/Fabricator to join our team in a fast-paced fabrication shop. This role requires strong hands-on fabrication skills, the ability to read and interpret drawings, and proficiency in welding and operating shop equipment. The ideal candidate takes pride in quality workmanship, works safely, and can meet production deadlines with minimal supervision. Responsibilities • Perform MIG welding (TIG and Stick welding a plus) in all positions (flat, horizontal, vertical, overhead), • Read and interpret blueprints, shop drawings, and work orders to fabricate parts accurately, • Operate fabrication equipment including press brake, band saws (vertical and horizontal), rollers, and grinders, • Measure, layout, and fit components to ensure proper alignment and tolerances, • Assemble and fabricate metal components to meet quality and specification requirements, • Inspect finished work to ensure accuracy, structural integrity, and quality standards, • Maintain a clean, organized, and safe work environment, • Work closely with team members, supervisors, and engineering to resolve fabrication issues, • Meet production schedules and deadlines Requirements • Minimum 3–5 years of experience in a fabrication or manufacturing environment, • Strong proficiency in MIG welding (TIG and Stick experience preferred), • Ability to weld in multiple positions, • Ability to read and interpret blueprints and measurements accurately, • Experience operating common shop equipment (press brake, saws, rollers, etc.), • Strong attention to detail, quality, and safety, • Ability to work independently and as part of a team, • Physically capable of lifting materials, standing for extended periods, and working in a shop environment, • Reliable and punctual with a strong work ethic Preferred Qualifications • Welding certifications (AWS or equivalent), • Experience with structural steel or custom fabrication, • Familiarity with shop math, tolerances, and fit-up practices, • Forklift and/or overhead crane experienceRequirements:

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Memphis, TN. Most positions are first shift with a pay range of $23-$27/hour based on experience & skill level. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • MIG, TIG, Stick & Structural Welding, • Air Arc, • Repair Welding, • Pipe & Mechanical, • Basic Tools for the Trade, • Proper PPE must be worn: Have your own Hood and Gloves/Leathers Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description JOB SUMMARY: The Maintenance Mechanic is responsible for installing, repairing, and maintaining large industrial textile processing equipment, as well as facility maintenance. Tasks include start-up and shut-down procedures, electrical troubleshooting, maintaining and operating boilers, welding and cutting, hydraulics, pneumatics, mechanical, and other systems ESSENTIAL FUNCTIONS: • Start-up/shut down plant machinery each day., • Perform safe operation of the boiler and all boiler room equipment. Perform water and boiler tests., • Installs, repairs, and performs preventive maintenance inspections and services on industrial processing equipment, water levels, water systems and other equipment and systems., • Provides emergency/unscheduled repairs of production equipment., • Diagnoses problems, replaces or repairs parts, tests and makes adjustments., • Thoroughly cleans machines and machine parts, removing parts and reinstalling as necessary., • Oils and lubricates moving parts on machines to ensure effective performance., • Records and reports damaged, worn, or broken parts., • Orders and installs replacement parts for machines., • Identifies the causes of unexpected breakdowns of machines., • Repairs broken machines quickly and efficiently., • Prepares reports documenting work performed., • Cleans, organizes, inventories, stocks, and otherwise maintains shop areas, parts, tools, and supplies., • Coordinates with managers to schedule regular maintenance on machines., • Responds to daily maintenance requests in a timely fashion to minimize equipment downtime., • Collaborates with product manager or plant engineer regarding new products being added and modifications that will be required., • Makes necessary modifications and implements tests runs; confers with product manager regarding test results and makes additional alterations to machinery as required., • Program PLC’s, • Maintain and repair trucks as needed., • Perform lockout/tagout and other safety procedures., • Maintain chemical room., • Performs other related duties as assigned. JOB QUALIFICATIONS AND PHYSICAL REQUIREMENTS: • High school diploma or equivalent., • Some locations may require relevant certifications, a boiler license or PLC programming., • Have and maintain a valid driver’s license and driving record free of chargeable accidents, speeding or other safety violations., • Minimum of two years maintenance engineering experience with specific knowledge of machinery, electricity, electronics, plumbing, hydraulics, pneumatics, welder, and boiler applications., • Proficient in the proper use of power and hand tools., • Strong electrical troubleshooting ability of 3 phase 230-volt systems., • PLC programming experience., • Experience, in carpentry, boiler repair, welding, and general facility repairs., • Good verbal and written communication skills in English, ability to comprehend and follow direction, perform basic math, good time management., • Must be a team player with enthusiasm, initiative, and pride in work well done; self-starter dedicated to continual quality improvement., • Proficient in reading electrical schematics., • Standing, sitting, walking, bending, stooping, reaching, twisting, kneeling, working in confined areas, reaching overhead, driving a forklift, grasping, moving equipment, pushing, pulling, moving loaded carts weighing up to 500 lbs, lifting and carrying up to 100 lbs, reading, writing, speaking, hearing., • Inside and outside areas of a typical industrial laundry facility, which includes working with and around large machinery, variations in temperature, noise, odors, humidity, lint and dust, in general offices or on outside grounds., • Travel: Occasionally, such as to procure parts., • 2 year(s): Commercial Laundry / Production Facility Experience

Works under the supervision of Fabrication Shop Manager and Fabrication Shop Foreman Performs various fabrication shop duties at the direction of Fabrication Shop Foreman Attends all safety and training as required Acquires qualification in use of material handling equipment Prepares material for fabrication including cutting and grinding of pieces as well as selection of appropriate hand and/or power tools for such work Responsible for accurate layout and fit-up of component parts for final welded assembly using engineered construction/shop drawings Hourly employee, excellent benefits General knowledge of and experience in steel fabrication in a production shop environment Knowledge of and/or experience in SMAW (Shielded Metal) and FCAW (Flux Cored) arc welding Possess a professional, safe and cooperative work place demeanor Pass drug screen, clean background check 401(k) program with company match up to 10% of pay Family medical, dental and vision insurance Paid time off and other benefits Barnhart CARES family care and community service opportunities Barnhart is built on a strong foundation of serving others. The fruit of our labor is used to grow the company, care for our employees, and serve those in our communities and around the world. Barnhart has built a nationwide reputation for solving problems. We specialize in the lifting, heavy-rigging, and heavy transport of major components used in American industry. Barnhart has built teams that form one of our industry's strongest network of talent and resources with over 60 branch locations across the U.S. working together to serve our customers. This growing network offers our team members constant opportunity for career growth and professional development. Barnhart has a strong team culture -- the "One TEAM." We are looking for smart, hard-working people who strive for excellence in their work and appreciate collaboration. Join a team that values safety, servant leadership, quality service, innovation, continuous improvement, fairness, and profit with a purpose. EOE/AA Minority/Female/Disability/Veteran

The Welder will be welding of rebar of all sizes.

The Welder will be welding of rebar of all sizes.

Trade Professionals for current & future projects in and around.Most positions are first shift with a pay range of.Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career!.MIG, TIG, Stick & Structural Welding.Proper PPE must be worn: Have you

Job Description Here at Atlantic Track & Turnout Co., we lead the way for manufacturing, supply, and service for railroads, transit systems, and crane runways. We’re proud to be employee-owned and take great pride in the exceptional results we consistently deliver for our partners and customers. For over 60 years, Atlantic Track has put our people first to foster strong teams, products, and services that are second to none. We’re currently seeking a Welder I to join our growing team of professionals in Memphis, Tennessee. Roles and Responsibilities: • Reads and interprets work instructions, blueprints, electrical schematics, and reference documents, • Critically examines how various mechanical and/or structural parts fit together, • Operates cranes and jib cranes, • Assists other employees, works collaboratively to accomplish goals, • Alerts/advises supervisors or engineers when issues arise, • Maintains a safety and quality focused mindset, • Makes suggestions and improves processes or quality of assembly projects at hand Minimum Qualifications: • High school diploma or equivalent (e.g. GED, HiSET, TASC, etc.), • Minimum of 1 year of industrial welding experience, • Safety Awareness- Wear and use appropriate PPE, ensure tools are in good working order, take action if coworkers in work area are at risk or causing risk., • Ability to lift and move objects weighing up to 50 lbs., • Ability to work on-site in Memphis, Tennessee Preferred Qualifications: • Experience in heavy structural assembly work, • Willingness to adapt and learn, • A self-starter who takes initiative Atlantic Track offers a holistic benefits package, including competitive pay, 401k plan with company matching funds, health / dental / vision insurance options, life insurance, paid time off, an employee shared ownership plan, and more. We are proud to be an equal opportunity employer. Company DescriptionAtlantic Track & Turnout Co. A Railroad Manufacturing and Supply Company: We’re your single-source solution for Class I and heavy haul railroads, light rail transits, railroad contractors, and industrial enterprises. A Transit System Solutions Supplier: We offer a complete system for your transit needs—from specialized products and product expertise to complete project management. A Crane Runway Solutions Provider: Atlantic Track is the largest integrated and diversified supplier of crane runway materials and services in the country. Since 1964, we have been continuously investing in and expanding our equipment, manufacturing, and distribution capabilities. Our strategically located sales, manufacturing, and distribution facilities across the country ensure prompt customer service. By building a robust inventory and maintaining a national footprint, we can provide more efficient and cost-saving direct delivery. We are an integrated, single-source solution for all of your railroad, transit and crane runway needs.Atlantic Track & Turnout Co.\r\n\r\nA Railroad Manufacturing and Supply Company: We’re your single-source solution for Class I and heavy haul railroads, light rail transits, railroad contractors, and industrial enterprises.\r\n\r\nA Transit System Solutions Supplier: We offer a complete system for your transit needs—from specialized products and product expertise to complete project management.\r\n\r\nA Crane Runway Solutions Provider: Atlantic Track is the largest integrated and diversified supplier of crane runway materials and services in the country.\r\n\r\nSince 1964, we have been continuously investing in and expanding our equipment, manufacturing, and distribution capabilities. Our strategically located sales, manufacturing, and distribution facilities across the country ensure prompt customer service. By building a robust inventory and maintaining a national footprint, we can provide more efficient and cost-saving direct delivery. We are an integrated, single-source solution for all of your railroad, transit and crane runway needs.

Job Description Why do you want to work as a Trailer Mechanic with QRS Shops? We offer competitive wages and employee benefits including the following amazing benefits to our employees: • Weekly Competitive Pay - Pay is $35 / Hour, • Tool/Boot Reimbursement Program, • Referral Program, • Employee benefits: Discounted premiums for Medical, Dental and Vision plans, • Generous Paid Time Off/ Holiday Schedule, • Diagnose and repair tractors and trailers., • Perform annual/systematic 90 day and HM-183 inspections (tankers) on equipment as required., • Ensure equipment meets Federal FHWA standards., • Operate a yard hostler truck to move trailers within the facility yard and the shop as needed., • Order and receive parts and supplies as needed., • Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste., • Clean, organize and maintain the work environment to ensure equipment longevity and workplace safety., • Using welding equipment., • Perform miscellaneous duties as assigned., • Must possess at least 3 years of experience in repair and service of trailers, hazmat tankers, and medium duty trucks., • Required to have demonstrated knowledge of vehicle and equipment theory, principles and repair relating to diesel engines, air, electrical, mechanical, and hydraulic systems., • Minimum of 3 years experience of tractor and trailer maintenance, DOT rules and regulations., • Ability to use vehicle diagnostic software., • Minimum of 2 years as a fleet mechanic., • Minimum of 3 years of DOT HM-183 certification, training or experience. ASE Certification not required but recommended., • Minimum of 2 years operating welding equipment (TIG), R-stamp Certification. Please note that per Quality Carriers, Inc. policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity.

Hyosung HICO is seeking to fill an Associate Welder.

The TIG / Laser Welder performs precision welding on medical-grade components and assemblies in a regulated manufacturing environment. Weld components to tight tolerances while meeting cosmetic, structural, and functional requirements using GTAW and Fiber CNC welder.

If you are a welder and want to work alongside other proven craftsmen who emphasize safety, productivity, and superior workmanship, this is your chance to advance your career!.

Hyosung HICO is seeking to fill an Associate Welder.