Trabajos welder en Tulsa, OklahomaCrear alertas

Job DescriptionLocation: Sand Springs Fitter Welder Working Lead Pay Rate and Hours: • $23-$29/hr, • Friday, Saturday, Sunday from 6:00 a.m. – 6:30 p.m. They will work 36 hours but get paid for 40 hours.Fitter Welder Working Lead Job Description:, • The Fabrication Lead is a working lead position responsible for performing fabrication and welding duties while also providing guidance and support to a team of fabricators., • This role ensures jobs are completed safely, efficiently, and in compliance with ASME and OSHA standards., • The Fabrication Lead works alongside the crew, serves as a mentor for less experienced employees, and acts as the first point of contact for task direction and quality checks., • Perform fabrication, layout, and welding tasks, including fitting, clamping, tack-welding, grinding, and assembly in accordance with blueprints and specifications., • Lead by example on the shop floor, demonstrating proper welding and fitting techniques and safe work practices., • Provide day-to-day guidance and mentoring to assigned fabricators and welders, ensuring productivity and adherence to company standards., • Assist in coordinating workflow and prioritizing daily tasks to meet production schedules., • Inspect workpieces for accuracy and conformance to drawings, verifying weld quality meets ASME Train and coach new or less experienced employees on tools, equipment, and processes.Fitter Welder Working Lead Skills:, • Operate forklifts, overhead cranes, and other equipment safely to support fabrication work., • Ensure accurate completion of production documentation, quality records, and job hours., • Report equipment issues, safety concerns, and workflow challenges to the Fabrication Foreman or Production Manager., • Maintain a clean, safe, and organized work environment and comply with all safety rules and regulations., • Perform other duties as assigned.Fitter Welder Working Lead Required Education and Experience:, • High school diploma or equivalent (GED)., • 3–5 years of fabrication and welding experience in a shop environment., • Ability to read and interpret blueprints, fabrication drawings, and engineering specifications., • Strong knowledge of ASME quality control procedures., • Proficiency in welding processes including GTAW (TIG), GMAW (MIG), FCAW (Fluxcore), and SMAW (Stick)., • Demonstrated ability to train or mentor less experienced employees., • Preferred Education and Experience, • 2-year technical degree or vocational certificate in welding or fabrication., • Previous experience in a lead or mentoring roleKey Personnel Benefits While on Key Personnel’s payroll, you can access Key’s benefits package, including health, dental, vision, term life insurance, short term disability, PTO and more!Apply today! In order to make the best use of your time, only qualified applicants will be contacted.Our office is located at 9717 E. 42nd St (Tech Ridge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete the I9 form between the hours of 8 am to 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer.#INDLI26

Job DescriptionLocation: Sand Springs Fitter Welder I or II Pay Rate and Hours: • $23-$29/hr, • Friday, Saturday, Sunday from 6:00 a.m. – 6:30 p.m. They will work 36 hours but get paid for 40 hours.Fitter Welder I or II Job Description:, • Fitter Welder I or II responsibilities are clamps, holds, tack-welds, grinds, and bolts components to position for welding., • Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications., • Measure dimensions of completed products or workpieces to verify conformance to specifications., • Develop templates and models for welding projects, using mathematical calculations based on blueprint information., • Analyzes engineering drawings and specifications to plan layout, assembly, and welding operations., • Maintain and complete all required records and production documentation., • Layout, fits nozzles supports and couplings per blueprint into shell., • Remove rough spots from workpieces, using portable grinders, hand files, or scrapers., • Maintains a safe work environment and reports defective tools and equipment. Fitter Welder I or II Skills:, • Ability to operate a forklift and crane., • Complies with all safety rules and regulations., • Perform other duties as assigned., • High school diploma or equivalent (GED)., • 2 year technical degree or vocational certificate in welding preferred., • 2 to 4 years of relevant experience and/or training., • Read and interpret blue prints and have strong mathematic skills., • Ability to use and read level, tapes, protractors, and various tools., • Possession of strong organizational skills., • Excellent written and verbal communication skills., • Ability to work independently on assigned tasks., • Ability to pass applicable welding test GTAW (TIG), GMAW (MIG), FCAW (Fluxcore).Key Personnel BenefitsWhile on Key Personnel’s payroll, you can access Key’s benefits package, including health, dental, vision, term life insurance, short term disability, PTO and more!Apply today! In order to make the best use of your time, only qualified applicants will be contacted.Our office is located at 9717 E. 42nd St (Tech Ridge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete the I9 form between the hours of 8 am to 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer.#INDLI26

Job Description Overview Tradesmen International is immediately hiring skilled Pipe Welders for projects located in and around Arcade Acres, WI. This is a full time opportunity with a pay rate of up to $30/hour based on experience & skill level plus $100/per diem for travelers of 60+ miles from the job site. If you are a Welder and want to work alongside other proven craftsmen who emphasize safety, productivity and superior craftsmanship, this is your chance to advance your career! Job Scope: • Perform precise welds in multiple positions according to job specifications, • Conduct post-weld inspections to ensure quality and compliance with standards, • Interpret and work from technical drawings and blueprints, • Maintain a clean, safe, and organized work environment, • Follow all safety procedures and protocols to prevent accidents and ensure compliance, • Troubleshoot and adjust welding parameters for optimal performance, • Collaborate with team members to meet production goals and deadlines, • Other tasks as assigned Requirements: • Ability to read blueprints, • MIG weld stainless pipe, • Read blue prints, • Use precision measurement tools Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Tradesmen+ Rewards Program – earn points for hours worked, • Vacation Pay, • Health insurance, • 401(k) retirement savings plan Tradesmen International is an EO employer - M/F/Veteran/Disability “Be Safe” from fraud! Tradesmen International will never ask you to pay for certifications, equipment, or other “up front” costs as a condition of hire. Similarly, we do not request pictures of documents or IDs to private phone numbers or email addresses. If in doubt, please call or visit your closest Tradesmen office to verify the request. Click here to visit Tradesmen’s full website.

Job DescriptionLocation: Tulsa Sub Arc Welder Pay Rate and Hours: • Pay: $28-$35/hr. DOE, • Hours: Monday-Thursday 6am-4:30pm Possible OT on FridaySub Arc Welder Job Description:, • Operate submerged arc welding (SAW) equipment to perform high-quality welds on heavy steel components and large assemblies., • Work with and around heavy machinery such as cranes, rollers, positioners, and forklifts to maneuver and secure oversized parts safely., • Read and interpret blueprints and welding procedures to set accurate weld parameters and ensure proper fit-up.Sub Arc Welder Skills:, • Custom metal welding, • Industrial welding, • Precision welding, • Structural welding, • Welding fabrication, • Heavy-duty weldingAdditional information:The weld test will take most of the day. They’ll start by showing the candidates how they want the work done, and then the candidates will perform those welds themselves. SAFETY SENSITIVE POSITION Key Personnel Benefits:This is a temp-to-hire position. While on Key Personnel’s payroll, you can access Key’s benefits package, including health, dental, vision, term life insurance, short-term disability, PTO, and more! To make the best use of your time, only qualified applicants will be contacted. Apply online today at www.keyjobs.com. Our office is at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete your I-9. between the hours of 8 am to 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer.#INDLI26

Job DescriptionASME Pressure Vessel Welder Pay: $33.00 per hour Shift: Day Shift (Monday–Friday) Location: [Insert Location] Position Type: Full-Time We are hiring experienced ASME Pressure Vessel Welders for day shift. This role is for welders who understand code work, take pride in clean welds, and can handle pressure vessel fabrication without constant supervision. If you’ve welded on stamped vessels before, you’ll feel right at home here. Responsibilities • Perform welding on ASME pressure vessels in accordance with Section VIII standards, • Read and interpret blueprints, WPS, and fabrication drawings, • Complete high-quality welds using GTAW, SMAW, and/or FCAW processes, • Ensure welds meet visual, X-ray, and other inspection requirements, • Work closely with fitters and shop leadership to maintain production flow, • Follow all safety procedures and maintain a clean work area Qualifications • Proven experience welding ASME pressure vessels, • Strong understanding of ASME Section VIII and Section IX requirements, • Ability to pass weld tests and inspection standards (visual, X-ray, bend test as applicable), • Experience reading blueprints and weld symbols, • Reliable attendance and strong attention to detail, • Ability to work independently on day shiftWhat We Offer, • $33.00 per hour, • Steady day shift schedule, • Clean, organized fabrication environment, • Long-term opportunity with a reputable shop If you’re a pressure vessel welder who can consistently produce code-quality welds, we want to talk. Apply today and be ready to test. #MED TRINITY EMPLOYMENT SPECIALISTS IS AN EQUAL OPPORTUNITY EMPLOYER See the great things people are saying by checking out our Google reviews, along with our Facebook, LinkedIn, Instagram, X/Twitter.Please visit theCareer Centeron our website for some helpful resources to help in your job search, to build a resume, for interview tips and many job opportunities! • Construct, assemble, maintain, and repair stationary steam boilers and boiler house auxiliaries. Align structures or plate sections to assemble boiler frame tanks or vats, following blueprints. Work involves use of hand and power tools, plumb bobs, levels, wedges, dogs, or turnbuckles. Assist in testing assembled vessels. Direct cleaning of boilers and boiler furnaces. Inspect and repair boiler fittings, such as safety valves, regulators, automatic-control mechanisms, water columns, and auxiliary machines.

Job Description Job Summary To set up and operate a variety of welding equipment, including electric-welding apparatus, acetylene-welding apparatus, and other assigned welding apparatus to perform complex welding of all types of parts, assemblies, piping or other items, working to exacting tolerances. Responsibilities and Duties 1. Plans work, including determining welding techniques and sequence of welding operations, follows complicated engineered drawings and sketches, welding practices and approved procedures., 2. Sets-up welding equipment for a variety of welding operations, making adjustments to related positioners and fixtures as required, to work material., 3. Performs complex layouts and assemblies on a variety of parts, including experimental and development items, bending of pipe and burning of plate., 4. Must certify per Section 9 of ASME Code qualifications with the different types of filler material, along with the different methods and positions, as required by the facility and customer requirements., 5. Monitors quality of work throughout all stages of welding, making dimensional and visual checks and conducting non-destructive tests on items worked. Takes appropriate corrective action to correct faults in work., 6. Operates all electric-welding, acetylene-welding plasma and plate burning and blasting apparatus to perform complex welding on all types of parts, completed assemblies, piping and other items, including experimental and proto-type items, working on a broad range of corrosion resistant materials and to exacting tolerances to meet Code requirements of ASME, and Ruhrpumpen drawings., 7. Performs required burning, soldering, and silver brazing., 8. Maintains assigned equipment and work area in a clean and orderly condition., 9. Operates hand grinding and chipping equipment on parts, as required., 10. Operates overhead crane and other material moving equipment along with other power equipment used in the welding process., 11. Instructs and provides assistance to others as needed., 12. Furnishes own hand tools., 13. May be required to perform LPE and occasional hydro testing., 14. Performs other duties as assigned., 15. Follows appropriate handling and disposal of hazardous waste in compliance with JHA’S ons. Knowledge of applicable Safety Data Sheets (SDS)., 16. For protections of self and others, performs all work in accordance with established safety practices and facility rules. 1. Produces quality on time parts and complies with ISO 9000 requirements., 2. Maintain daily weld log and maintains Continuity log., 3. All personal tools will follow company RPI calibration requirements., 4. All personnel are required to locate their materials for processing and relocate them to next process staging area. Qualifications and Skills High School Diploma or Equivalent. Completion of 2 to four years of Trade or Technical School or equivalent. Five plus years of experience preferred. Knowledge Completion of Trade or Technical School in welding or equivalent experience, requiring use of shop mathematics, some complicated drawings, specifications, charts, and tables, together with the use of precision measuring instruments. Must be able to read and write English. Physical Requirements Prolonged Standing Walking, bending, kneeling, twisting, kneeling Ability to lift up to 50 lbs. Hand/Eye Coordination Ability to work in hot/cold environment MUST BE AUTHORIZED TO WORK IN THE UNITES STATES VEVRAA Federal Contractor/ EEO/AAP Powered by JazzHR yBUtXTGD1L

Job Description Are You the Go-To Pipe Welder in the Shop? Do you move confidently between MIG, TIG, and FCAW? Are rolled (pinwheel) passes on 6-inch Sch. 40–160 just another day’s work? Can you lay a clean, full-penetration TIG weld on 2-inch pipe and back it up with code-quality results? If that sounds like you, read on. Your Impact • Fabricate and weld pressure pipe using MIG, TIG, and Fluxcore processes, • Run pinwheel (rolled) and positional welds on 6" pipe across Schedules 40 to 160, • Produce full-pen TIG welds on 2" pipe that meet stringent quality requirements, • Decipher welding symbols, blueprints, and specifications/WPS, • Validate work against required codes and internal quality standards, • Keep equipment in top shape and the shop area safe and clean, • Adhere to all safety procedures at every step Must-Haves, • 1+ year of welding in a shop environment, • Proficiency with MIG, TIG, and Flux-Cored techniques, • Experience welding pipe in both rolled (pinwheel) and positional orientations, • Ability to weld 6" Schedule 40–160 and 2" pipe using TIG with full penetration, • Strong command of welding fundamentals, materials, and safety, • Comfortable reading prints and following weld procedures Tools You’ll Use, • MIG Welder, • TIG Welder, • Flux-Cored Arc Welder

Job Description Class A Fitter Welder. TEST(s) • Welding: 6" Sch 80 6G GTAW Stringer / Hot Pass, SMAW Fill and Cap., • 3G FCAW 1/2" Plate test, • Fitter Test. JOB DESCRIPTION Position: Class A Fitter / Welder Days: Monday- Thursday Hours: 6:00am-4:30 PM, Friday and Saturday overtime as needed 6:00am - 2:15PM Pay: $34 – 36 DOE Products: Waste heat recovery equipment designed and built to ASME Code: waste heat and process gas boilers (firetube boilers, watertube boilers), steam drums, economizers, superheaters, Pressure Vessels Requirements • Read, interpret, and understand drawings and welding procedure requirements., • Perform basic and advanced math functions., • Ability to Layout, Cut, Fit and Tack pressure and non-pressure parts. Including but not limited to cylinders, nozzles, tubes, tube sheets, headers, structural components, • Utilize leveling equipment to ensure orientation accuracy., • Experience in Flux Core (FCAW), Stick (SMAW), and Tig (GTAW)., • Submerged arc welding a plus but not required., • Weld in all positions (Flat, Horizontal, Vertical, Overhead)., • Must be able to Pass X-rays and other Non-Destructive testing methods., • Variety of ferrous and non-ferrous materials: Carbon, Stainless, Chrome, and Nickel Alloys., • Proficient using Carbon arc gouge and cutting torch., • All work must meet ASME Code, Company and Client Requirements., • Perform other shop labor tasks as needed., • 5 Plus years of experience in a manufacturing setting required. Company DescriptionTaylor Staffing is a full service generalized staffing service specializing in light industrial, manufacturing, and clerical positions in the United States. Our temporary hire periods are shorter than other agencies, and we have many other benefits and much more flexibility than our competition. We look forward to meeting you!Taylor Staffing is a full service generalized staffing service specializing in light industrial, manufacturing, and clerical positions in the United States. Our temporary hire periods are shorter than other agencies, and we have many other benefits and much more flexibility than our competition. We look forward to meeting you!

Job Description We’re hiring skilled Welders for multiple facilities and shifts (1st & 2nd) in the Tulsa area. Openings include MIG Welders, Structural Welder/Fitters, Header Welders, and a Night Shift Welding Supervisor. Responsibilities: Perform MIG/Flux Core welding on carbon steel and structural components; read blueprints and welding symbols; fit and fabricate parts; inspect weld quality; maintain safety standards. Supervisory role includes leading teams, meeting production goals, and ensuring ASME code compliance. Requirements: Proven welding experience (MIG required; Flux Core preferred), strong blueprint reading, fitting/fabrication skills, and ability to pass weld tests (2G/3G). Header roles require pipe/cylinder welding experience. Supervisor candidates need leadership and ASME knowledge. Schedule: 1st & 2nd shifts available (Mon–Fri or Mon–Thurs depending on role). Apply today to join a growing, quality-driven team! Go to AccentStaffing.com and click Apply Now if interested! Company Description"At Accent Staffing, we unite top talent with exceptional companies, forming strong alliances for mutual success. Our honest, innovative, and personalized approach fosters growth for businesses and individuals, alike paving the way for a better future.""At Accent Staffing, we unite top talent with exceptional companies, forming strong alliances for mutual success. Our honest, innovative, and personalized approach fosters growth for businesses and individuals, alike paving the way for a better future."

Job Description Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! http://www.dxpe.com/about-us/careers/ Summary: The Welder will do the following, mig, tig, and stick welding, pipe, steel, and stainless steel welding, pipe fitting, receive instructions, prints, and work orders for the job, plans details of working procedure, tools and material requirements, fabricates equipment by cutting, burning, and welding various metals, repairs equipment by using welding techniques and appropriate welding equipment. Responsibilities of the Welder include, but are not limited to: • Mig, tig, and stick welding, • Pipe, steel, and stainless steel welding, • Pipe fitting, • Receives instructions, prints, and work orders for the job, • Plans details of working procedure, tools and material requirements, • Fabricates equipment by cutting, burning, and welding various metals, • Repairs equipment by using welding techniques and appropriate welding equipment, • Cleans and prepares surfaces to be welded, • Sets up, assembles, and tacks weld parts, • Builds up worn or defective surfaces, • Uses burning equipment to dismantle assemblies and to cut material to size and shape, • Keeps equipment and work area clean and orderly Qualifications of the Welder include, but are not limited to: • Welding experience, • Familiar with iron worker, plasma cutter, pipe threaded, and grinders, • Background check, physical, and drug test required #LI-JG1 #ZRJG Additional Information: • Physical Demand: Must be able to lift 50 lbs. unassisted., • Working Conditions: Shop environment, • Training/Certifications: Welding certificate, • Shift Time/Overtime: Day Shift, Monday through Friday 6am to 5pm., • Travel: N/A, • Education: N/A Location: USA:OK:Tulsa DXP offers a comprehensive benefits package for full-time regular employees, normally working a minimum of 30 hours per week, including: medical, dental, vision, flexible spending account, paid holidays, life and disability insurance, and additional supplemental benefits. All employees are eligible to participate in the 401(k) plan. Salary is commensurate with experience. Except where prohibited by state law, all offers of employment are contingent upon successfully passing a drug test. DXP is an equal opportunity employer and participates in E-Verify. EOE/M/F/D/V.

Job DescriptionLocation: West TulsaWelder Pay Rate and Hours: • $24 per hour, plus depending on experience, • Hours: Monday through Thursday, 4:30 pm to 3 amWelder:The company is seeking a Welder who will be required to perform procedural tasks under general supervision, and complex tasks involving the use of theoretical knowledge and motor skills under close supervision.Welder Key Responsibilities:, • Ability to safely light and use gas torches., • Ability to safely operate various types of hand grinders., • Use a combination square and level to measure and fit-up for concentricity alignment., • Understand the two-hole alignment/two-hole fit-up that is used and understood by welders associated with the pipeline industry., • Locating, understanding, and following (WPS) Weld Procedure Specifications., • Must be able to make weld repairs per specifications., • Must be able to perform a complete fit-up for the work area., • Must maintain a high X-Ray percentage of 98% acceptances (for all 4 weld processes)., • Reading Prints – Must understand print dimensional locations and tolerances along with weld symbols., • Safety – Employees must wear all required (PPE) Personal Protective Equipment and must abide by all (HSE) Health Safety Environment requirements.Welder Skills/Knowledge/Abilities:, • Possess a prerequisite amount of knowledge, attitude, skills, and habits, • Ability to safely operate cranes with good safe knowledge of lifting and rigging procedures., • FCAW experience – Flux Core Arc Welding, • GMAW experience – Gas Metal Arc Welding, • GTAW experience – Gas Tungsten Arc Welding, • SAW experience – submerged arc welding Safety Sensitive RoleKey Personnel Benefits This is a temp-to-hire position. Only qualified applicants will be contacted to make the best use of your time. Apply online at www.keyjobs.com today!Our office is located at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete the I-9 form between the hours of 8 am and 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer.#INDLI26

Job Description NOW HIRING: Flux Core Welders – Day & Night Shift Tulsa area manufacturing company is hiring Flux Core Welders for immediate openings on both day and night shift. Pay: • Day Shift: $22/hour, • Night Shift: $23/hour We are looking for motivated welders ready to work in a production and fabrication environment. Recent welding school graduates are encouraged to apply. Candidates must have completed welding school and be ready to test. Current welding students are not eligible at this time. What We Offer: • Immediate openings, • Day and night shift available, • Opportunity to test and start quickly, • Stable work environment, • Weekly pay Requirements: • Flux core welding experience or welding school training, • Ability to pass welding test, • Reliable transportation, • Ready to work full-time, • Must not be a current welding student, • Apply today to schedule an interview quickly. Important Note We partner with multiple companies across the Tulsa area. Pay, shift, schedule, and location vary by assignment and experience. During your interview, a recruiter will match you with the openings that best fit your skills and preferences.

Job DescriptionSalary: 35.00 base Brooks Grease Service, Inc. is hiring a welder/fabricator in Tulsa OK who is reliable, can work independently, can manage their own time and be available for some overnight travel. The successful candidate must have experience in mig, tig, flux core and stick rod. Utilization of Cutting torch and Plasma Arc is required. The employee will do Fit-up and both structural and pipe layouts. Wage is based on experience with the base rate of $35/hour. The employee must have a valid Driver License and a clean driving record and be able to pass a pre-employment background check and drug screen. A Welding test will be given - 5G 6"XH. 6010 root 7018 fill and cap. Brooks Grease Service pays for hotels and meals during overnight stays; the company supplies all required tools and consumables. BENEFITS • Competitive Hourly Wage, • Annual wage increases, • Weekly pay checks direct deposited, • 401k, • Paid Time Off, • vacation, • sick days, • bereavement, • Paid holidays, • Health insurance available after 60 days of FT employment, • Medical (75% paid for employee by employer), • Dental, • Vision, • Life Insurance (25K paid by employer), • Meal Reimbursement for those who travel more than 30 miles from plant and/or traveling Come work for the Best! Brooks Grease Service is a successful third-generation family-owned and operated company based in Tulsa, OK. Since 1957, we have proudly served commercial and industrial facilities throughout OK and its surrounding states. Look at our Website: www.brooksgreaseservice.com Also on Facebook and Instagram!

Job DescriptionLocation: West Tulsa Welder Pay Rate and Hours: • $24 per hour, plus depending on experience, • 7:00 am to 4:30 pm (with possible overtime), Monday – FridayWelder:The company is seeking a Welder who will be required to perform procedural tasks under general supervision, and complex tasks involving the use of theoretical knowledge and motor skills under close supervision.Welder Key Responsibilities:, • Ability to safely light and use gas torches., • Ability to safely operate various types of hand grinders., • Use a combination square and level to measure and fit-up for concentricity alignment., • Understand the two-hole alignment/two-hole fit-up that is used and understood by welders associated with the pipeline industry., • Locating, understanding, and following (WPS) Weld Procedure Specifications., • Must be able to make weld repairs per specifications., • Must be able to perform a complete fit-up for the work area., • Must maintain a high X-Ray percentage of 98% acceptances (for all 4 weld processes)., • Reading Prints – Must understand print dimensional locations and tolerances along with weld symbols., • Safety – Employees must wear all required (PPE) Personal Protective Equipment and must abide by all (HSE) Health Safety Environment requirements.Welder Skills/Knowledge/Abilities:, • Possess a prerequisite amount of knowledge, attitude, skills, and habits, • Ability to safely operate cranes with good safe knowledge of lifting and rigging procedures., • FCAW experience – Flux Core Arc Welding, • GMAW experience – Gas Metal Arc Welding, • GTAW experience – Gas Tungsten Arc Welding, • SAW experience – submerged arc welding Safety Sensitive Role Key Personnel BenefitsThis is a temp-to-hire position. Only qualified applicants will be contacted to make the best use of your time. Apply online at www.keyjobs.com today!Our office is located at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete the I-9 form between the hours of 8 am and 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer.#INDLI26

Job DescriptionSub Arc Welders Needed in Tulsa and Surrounding Areas Shifts Available: Various (Day, Night) Position Overview:We are seeking a skilled and experienced Sub Arc Welder to join our team in Tulsa, OK. The ideal candidate will be responsible for performing high-quality submerged arc welding operations on a variety of metal components. This position offers the opportunity to work on various shifts, providing flexibility to fit your schedule. Key Responsibilities: • Perform submerged arc welding (Sub Arc) on structural steel, pipe, and other metal components., • Read and interpret blueprints, engineering drawings, and welding symbols to ensure precise and accurate welding., • Set up and operate welding machines, including adjusting settings for specific jobs., • Inspect completed welds to ensure they meet quality standards and specifications., • Maintain welding equipment and perform routine maintenance as needed., • Work safely and adhere to all company and industry safety protocols., • Collaborate with team members and other departments to meet production goals and deadlines., • Report any issues or defects in materials, equipment, or welds to the supervisor. Qualifications: • High school diploma or GED equivalent., • Certification in welding (preferred)., • Minimum of 1 year of experience in submerged arc welding., • Strong understanding of welding techniques, materials, and processes., • Ability to read and interpret blueprints and technical drawings., • Familiarity with safety procedures and best practices in a welding environment., • Attention to detail and a commitment to producing high-quality work., • Ability to work independently and as part of a team., • Willingness to work various shifts, including evenings, nights, and weekends. Physical Requirements: • Ability to lift, carry, and move materials weighing up to 50 lbs., • Prolonged standing, bending, and reaching during welding operations., • Ability to work in varying temperatures and conditions, including a manufacturing environment. Abundant Solutions5151 South Mingo Road918.749.6999

Job Description Job description: Skilled Trades Specialists is looking for quality individuals aiming to land a great job with opportunity to grow and develop! If you have the ability to MIG Weld, ability to read prints and/or do basic math, and have a great attitude, please contact us so we can discuss! Must pass a leak test and also show proficiency with a tape measure for this job. We can provide test prep. for the right candidates. 3+ years' experience needed for this opening. Responsibilities: • Perform MIG welding operations on various metal components, • Read and interpret blueprints to determine welding specifications, • Use power tools and hand tools to fabricate and assemble metal parts, • Operate cranes and other lifting equipment to move heavy materials, • Inspect welded joints for quality and make any necessary repairs or adjustments Requirements: • Experience as a MIG Welder or similar role and ability to continue learning, • Knowledge in blueprint reading and interpreting welding specifications or ability to learn, • Ability to pass required leak/pressure test -Positive attitude and ability to show up everyday Note: This job description is not intended to be all-inclusive. The employee may be required to perform other duties as assigned. Job Type: Full-time

Job DescriptionLocation: South Tulsa Vessel Welder Pay Rate and Hours: • $24-$26, • Monday - Friday 6am-2:30pmVessel Welder Job Description:, • Weld test 3g plate test and 2” roll out.Vessel Welder Skills:, • Pinwheel experience preferred Key Personnel BenefitsWhile on Key Personnel’s payroll, you can access Key’s benefits package, including health, dental, vision, term life insurance, short term disability, PTO and more!Apply today! In order to make the best use of your time, only qualified applicants will be contacted.Our office is located at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete the I9 form between the hours of 8 am to 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer.

Job DescriptionWelder/ Fabricator Pay Rate and Hours: • Pay: $18.00/hr.+ depending on experience, • Hours: Monday-Friday 7:30am-4pmWelder/ Fabricator Job Description:, • You will be performing welding work on commercial trucks, which includes welding while positioned on top of the trucks as well as underneath them. Duties involve completing all required welds safely and accurately in elevated and confined positions, ensuring structural integrity and meeting project specifications.Welder/ Fabricator Skills:, • Proficient in MIG, TIG, and flux-core welding, • Fabrication and fitting experience preferredBenefits:This is a temp-to-hire position. While on Key Personnel’s payroll, you can access Key’s benefits package, including health, dental, vision, term life insurance, short-term disability, PTO, and more! To make the best use of your time, only qualified applicants will be contacted. Apply online today at www.keyjobs.com. Our office is at 9717 E. 42nd Street (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete your I-9. between the hours of 8 am to 3 pm, Monday through Friday. Safety Sensitive Role Key Personnel is an Equal Opportunity Employer.#INDLI26

Job DescriptionCoppersmith with 1-3 Years of Experience send resumes to: Nicole@abundantjobs.com Job descriptionOne of Oklahoma’s leading roofing companies is looking for a talented coppersmith to join our amazing roofing team in the field. The Coppersmith’s role is responsible for delivering an amazing, exceptional, 100% customer satisfaction experience, completing jobs in a timely manner, eagerness to grow and producing quality workmanship. Our brand and reputation rely on the proper execution of the responsibilities of this role.Key Duties: • Follow directions, • Punctual, • Capable of on-site fabrication and in shop fabrication, • Perform scope of work as directed, • Produce detailed drawings with on-site measurements as required, • Ensure work is performed at 100% satisfaction with quality and appearance, • Communication, • Confirm the customer is 100% satisfiedExperience Required:, • 1-3 years experience working with copper, • 1-3 years experience working on roofs, • Ability to solder copper, zinc and galvanized metals, • Must have own tools for fabrication and installation, • Valid Driver's License and good driving recordIf being a part of a growing, successful and engaging company is what you are seeking, then we would love for you to grow with us.We pride ourselves in high quality work and doing it right the first time with zero defects. We work on some of the most pristine properties in Oklahoma and would like your help as we continue to put our mark on this great state.Pay range is 22.00-25.00/hr. Job Type: Full-time

Job DescriptionHeader Welder – All Shifts ($27+/hr DOE) Position Summary: Seeking skilled Header Welders for multiple shifts. Candidates do not need prior header welding experience—as long as they can pass a Combo Stick/TIG weld test to X-ray quality standards, they may be considered. This position offers competitive pay, long-term opportunity, and a stable environment with room for growth. Flexibility to work weekends or night shifts as production needs arise is strongly preferred. Responsibilities: • Perform Stick (SMAW) and TIG (GTAW) welding on carbon and stainless steel components used in pressure and piping systems., • Weld to X-ray quality standards following company and industry procedures., • Read and interpret blueprints, welding symbols, and technical drawings., • Set up and maintain welding equipment and materials., • Perform fit-up, layout, and prep work as required., • Inspect and repair welds to ensure structural integrity and compliance with specifications., • Maintain a safe, clean, and organized work area., • Collaborate with team members and supervisors to meet production and quality goals.Requirements:, • Ability to pass a Combo Stick/TIG weld test (X-ray quality required)., • Prior header experience preferred but not required., • Experience with carbon steel, stainless, and pipe welding in a manufacturing or industrial setting., • Knowledge of ASME and API welding standards a plus., • Reliable attendance and a strong commitment to safety and quality. Pay: $27+/hr DOEShifts: All Shifts Available | Full-Time | Temp-to-Hire Opportunity Abundant Solutions918-749-69995151 S. Mingo RdTulsa, OK 74146

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matter Powered by JazzHR dqDdw65YKl

Job Description Welder Location: Tulsa, OK Schedule: Monday – Thursday, 6:00 AM – 4:30 PM (4-day workweek!) Hourly Rate: Up to $30/hr+ (with potential for higher pay after 6 months) Job Overview: We are seeking skilled and certified Welders to join our team. In this position, you will be responsible for performing high-quality welding on various piping systems. We’re looking for individuals with experience in multiple welding processes, including GTAW, MIG, and Flux Core. You will be expected to work independently and efficiently, ensuring that all welds are precise and meet the required specifications. Key Responsibilities: • Perform welding on pipe systems using GTAW (Gas Tungsten Arc Welding), MIG, and Flux Core techniques., • Complete the following welding tests:, • 2-inch Extra Heavy GTAW (Gas Tungsten Arc Welding)., • 6G welding test for all processes., • 6-inch Flux Core fill and cap., • Follow blueprint specifications to ensure accuracy and high-quality work., • Inspect finished welds for quality, strength, and conformity to standards., • Maintain a safe work environment by following safety protocols and guidelines. Requirements: • Must pass the following weld tests:, • 2-inch Extra Heavy GTAW test., • 6G welding test (all processes)., • 6-inch Flux Core fill and cap test., • Strong experience in pipe welding, including GTAW, MIG, and Flux Core., • Ability to work in a fast-paced environment and meet deadlines., • High school diploma or equivalent (preferred)., • Relevant welding certifications are a plus., • Attention to detail and strong problem-solving skills. Why Join Us? • Competitive pay with room for growth based on performance., • Potential to earn up to $30/hr+ within 6 months., • Excellent benefits package and work-life balance., • Long-term career development opportunities with a growing company. #MED TRINITY EMPLOYMENT SPECIALISTS IS AN EQUAL OPPORTUNITY EMPLOYER See the great things people are saying by checking out our Google reviews, along with our Facebook, LinkedIn, Instagram, X/Twitter. Please visit the Career Center on our website for some helpful resources to help in your job search, to build a resume, for interview tips and many job opportunities! High School Diploma 6G, GTAW, MIG and Flux Core • Use hand-welding, flame-cutting, hand-soldering, or brazing equipment to weld or join metal components or to fill holes, indentations, or seams of fabricated metal products.

Job Description The Shift Supervisor is responsible for overseeing daily production activities, ensuring that safety, quality, and efficiency standards are consistently met. This role leads and supports production employees, coordinates resources, monitors performance metrics, and ensures accurate documentation and smooth handoffs between shifts. The Shift Supervisor plays a critical role in maintaining operational excellence while fostering a safe, compliant, and team-oriented environment. Primary Responsibilities: • Assigns work to department personnel to attain department objectives using knowledge of production processes, company policies, production schedules, work orders, equipment capacity and employee capabilities., • Readily perceives and effectively responds to schedules and product flows essential to supervising highly productive, cost-effective, quality-oriented manufacturing operations., • Establishes and controls procedures to meet production schedules., • Recommends and initiates improvements to production processes, to increase manufacturing efficiency., • Establish and control procedures to ensure production of conforming fabricated assembly components., • Monitors and controls established procedures to ensure compliance with quality standards., • Establishes and monitors cost control systems to achieve department budget objectives., • Responsible for compliance with safety and housekeeping requirements., • Facilitates and promotes company policy and the company Quality Improvement program within all department work groups., • Provides training, support, direction, and guidance to department personnel to continually develop their work habits, job skills and safety practices., • Evaluates employee performance and accountability., • Provides objective feedback for continued employee growth., • Recommends and/or administers personnel actions in accordance with company policies and procedures., • Set department goals and develop outline for achievement., • May be exposed to excessive noise, welding gases and fumes, and varying weather conditions., • To work overtime as requested., • Performs other duties as assigned. Qualifications: • 5 years minimum supervisory experience in a manufacturing environment., • Computer literate with experience using e-mail and word processing applications (Microsoft Office)., • Ability to learn and understand software and complete transactions pertaining to fabrication or welding operations, excellent verbal and written communication skills., • Demonstrates ability to supervise diverse work groups in a team environment using effective listening, coaching, training, investigative and problem-solving skills, ability to exercise initiative, sound judgment and effective time management in a fast-paced environment with limited supervision., • Read and interpret weld process according to AWS and ASME section IX., • Ability to understand and apply workplace safety procedures., • Practical knowledge of manufacturing processes and equipment required., • Proficient in structural/vessel fitting, Mig/Fluxcore/Tig/Subarc welding, manual presses, eye burners, CNC plasma burners (Burny 10), shears, rolls and similar equipment., • Ability to manipulate tools and assembly components involving fine and gross motor skills sufficient to demonstrate welding job tasks., • Ability to lift 40 pounds., • Ability to sit, stand, bend, reach, kneel, twist, pull, push, grip, and climb. Important Info We partner with multiple companies across Tulsa. Pay, shift, schedule, and location vary. Our team will match you with the best available opportunity during the interview process.

Job DescriptionFor almost 30 years, SQA Services has been a premier leader in the provision of managed supplier quality services for audits, assessments, remote surveillance assessments, corrective actions, remediation, inspections, and engineering to manufacturers within all industries. We deliver services by deploying associates who are located throughout the United States and in 90+ countries around the world to your supplier sites. Our associates are expert quality assurance professionals with broad experience and local knowledge who can represent our clients on-demand and on-site faster than our competitors. We are seeking a detail-oriented Welding Inspector to ensure the quality, compliance, and integrity of welded components and assemblies. This role is responsible for performing inspections, verifying documentation, and ensuring all materials and workmanship meet applicable standards, drawings, and specifications. This position with be on site 5 days a week, for 4-8 hours a day. This is a 3-6 month contract. Key Responsibilities: • Perform visual inspection (VT) of structural welds in accordance with AWS D1.1 acceptance criteria, • Evaluate weld workmanship and surface condition, • Identify weld discontinuities including:, • Cracks, • Undercut, • Porosity, • Overlap, • Incomplete fusion indications, • Arc strikes, • Excessive reinforcement, • Crater defects, • Verify weld profiles, weld size, and contour requirements, • Inspect fillet welds, groove welds, CJP and PJP welds Welding Documentation Review • Review and verify approved WPS documentation, • Confirm welder qualifications and continuity records, • Verify welding processes and consumables comply with approved procedures, • Review fabrication drawings and weld symbols, • Ensure inspection requirements are properly flowed down In-Process and Final Inspection • Perform pre-weld, in-process, and final inspections, • Verify fit-up, joint preparation, alignment, and cleanliness, • Monitor workmanship during fabrication activities, • Verify repairs and rework activities meet acceptance criteria, • Coordinate with NDE personnel when required Reporting and Documentation • Generate inspection reports and nonconformance documentation, • Document weld findings accurately and clearly, • Provide objective disposition recommendations, • Support corrective action and root cause investigations, • Maintain inspection records and traceability documentation Supplier / Source Inspection Support • Perform source inspections at supplier facilities when required, • Support supplier quality evaluations and audits, • Communicate technical concerns professionally with suppliers and customers, • Assist in process improvement and workmanship standardization activitiesRequired Qualifications: Education / Experience • High school diploma or equivalent required, • Technical training in welding inspection preferred, • Minimum 3–5 years of structural welding inspection experience preferred, • Experience inspecting structural steel fabrication and welded assemblies Technical Knowledge Strong working knowledge of: • AWS D1.1 requirements, • AWS B1.11 visual inspection practices, • Weld symbols and fabrication drawings, • Welding processes:, • FCAW, • GMAW, • SMAW, • GTAW (preferred), • Structural steel fabrication practices, • Weld gauges and inspection tools, • Weld discontinuities and workmanship evaluationPreferred Qualifications:, • Certified Welding Inspector (CWI), • VT Level II certification, • NDE certifications (MT/PT preferred), • OSHA safety training, • Structural steel fabrication experienceNote: This position requires access to ITAR-controlled technical data and/or defense articles. As such, the candidate must be a U.S. citizen or U.S. lawful permanent resident (green card holder) to comply with the International Traffic in Arms Regulations (ITAR). Applicants who do not meet these criteria will not be considered for this role. SQA Services is an Equal Opportunity Employer. Employment is based on merit and qualifications, and is not influenced by race, color, religion, gender, national origin, veteran status, disability, age, sexual orientation, gender identity, marital status, or any other legally protected status. #ZR We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job DescriptionFitter/Welder Location: Tulsa, OK Schedule: Mon–Thurs | 6:00 AM–4:30 PM (OT available Fri/Sat as needed) 1st Shift | 4-Day Workweek | Climate‑Controlled Pay: $19/hr Responsibilities • Read and follow blueprints & technical drawings, • Perform fitting, fabrication, and assembly, • Measure, cut, and align materials using tape measure & tools, • Prep parts for MIG/TIG welding, • Inspect work for accuracy & quality, • Maintain a clean, safe work environmentRequirements, • Fitting or welding experience, • Strong blueprint reading skills, • Experience with measuring tools, • Ability to lift up to 50 lbs and stand for long periods, • High attention to detailPreferred, • MIG/TIG welding experience, • Experience in fabrication or carpentry, • Team player with ability to work independentlyWhy Join?, • 4-day workweek, • Climate‑controlled facility, • Strong medical, dental & vision benefits, • Stable work + optional overtime Apply today! Job Type & Location This is a Contract to Hire position based out of Tulsa, OK. Pay and Benefits The pay range for this position is $19.00 - $19.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tulsa,OK. Application Deadline This position is anticipated to close on Jun 11, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Okie Staffing is actively hiring for multiple immediate openings in Tulsa, OK across various industries. Whether you are seeking entry-level roles or skilled positions, we have opportunities available to match your experience and goals. Join a trusted staffing partner known for connecting candidates with reputable local employers. Enjoy competitive pay, flexible schedules, and supportive team environments. Available Positions May Include • CNC Machinists / CNC Set-Up / CNC Lathe Programming, • CDL A & CDL A/B Drivers, • Diesel & Heavy Equipment Mechanics, • Heavy Equipment Operators, • Welders / Fabricators / Brazer & Welder, • Industrial Painter, • Project Coordinator / Sales Assistant, • Sensor Repair / Microscope Assembly / Bench Tech, • Forklift, Yard, Assembly, Auto Auction, and Warehouse Roles, • Hospitality, Housekeeping, Banquet, Concessions, & Event staffing We value dependable, hardworking candidates and provide comprehensive training where applicable. Requirements • Varies by position — please inquire for details, • Valid identification and work authorization, some positions require food handling certifications, • Ability to pass background and drug screening as required, • Strong work ethic, reliability, and positive attitude, • Some roles may require lifting, standing, or repetitive tasks, • High School Diploma or GED preferred, or equivalent work experience Benefits Pay depends on the position. Ways to share your information for consideration. Apply today! Apply in person at: 9-11:30am/1pm-330pm M-F 5807 S Garnett Rd, Suite F, Tulsa, OK 74146 Call: 918-505-1777 Text: 918-284-1502

Job DescriptionSalary: $22 - $28/hr Thermal Specialties is looking for an Industrial Welder/Pipe Fitter for our Construction Services division in Tulsa, OK. Thermal Specialties is a family owned custom manufacturer and service organization. We provide comprehensive solutions to meet our customers needs. From next-generation industrial furnace systems and heat-treating capabilities to refractory installation and repair and insulation materials, Thermal Specialties is the single-source provider for high-temperature thermal processing applications. Role and Responsibilities: • 3 plus years of experience in ironwork, welding (code welding/certification not required), pipe fitting, mechanical troubleshooting, and / or support - preferred, • Knowledge of Industrial Furnace Operation, Mechanical Assembly, and installation of combustion equipment, • Ability to read fabrication/installation drawings, • Ability to work as a team, • Ability to intelligently interact with customers Qualified Candidates must possess: • Education must be a high school diploma or equivalent, • Valid drivers license and clean driving record, • Be at work on time. Be flexible to company needs and work locations. Stay on the job until the work is completed., • Maintain a safe working environment for you and your co-workers. Proactively identify possible safety hazards and report them to management, • Work to improve knowledge in areas of furnace maintenance as well as fabrication, • Perform work that meets or exceeds the time allotted for the job by management Physical Demands: • 50% travel to be expected(in and out of state), • Ability to lift 50 lbs. Must be able to work in extreme high/low temperatures and a physically demanding environment, • Frequently required to stand for long periods of time, • While performing the duties of this job, the employee is regularly required to use hands to finger, handle or feel; reach with hands and arms; and talk or hear, • Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus Job Type: Full-time Benefits: • Paid Time Off, • Health insurance, • Dental insurance, • Vision insurance, • Short and long-term disability, • Life insurance, • 401K & Roth (matching available), • Flexible Spending Account, • Employee Assistance Program

Job Description Currently seeking SECOND SHIFT pipe welders for a West Tulsa manufacturing company. The shift is 5:30PM-5:30AM. Pay is $26-35/hour depending on experience. Below are key responsibilities of this position -Must have AT LEAST 1 year of shop welding experience. -Must be able to operate an over head crane to move parts as needed. • Perform high-quality welding on pipe systems using Tig, Mig, and Flux Core processes as required, typically in 6G positions., • Must be able to weld on 6 inch pipe scheduled 40-160. -Execute welds according to code requirements. -Interpret technical isometric drawings, weld symbols, and specifications. -Set up, maintain, and troubleshoot welding equipment. -Examine welds for defects. -Adhere to all safety regulations, including wearing personal protective equipment, following, and participating in all safety measurements and precautions. Company DescriptionWe offer weekly pay & immediate benefits.We offer weekly pay & immediate benefits.

Job Description Ready to Get to Work? If you’re looking for a structural welding job, we likely have a spot for you. With multiple shops hiring, we can help match you to the right opportunity. Apply now and start working with a team that values skilled welders and keeps them busy. Multiple Shops | Steady Work | Heavy Overtime Available If you’re a skilled structural welder looking for consistent work, strong hours, and real opportunity, we want to talk to you. We are actively hiring Structural Welders for multiple fabrication shops, and overtime is plentiful for those who want it. We welcome welders at all stages of their careers—if you’re looking for a welding job, we can help place you. What You’ll Be Welding • Structural I‐beams, • Angle iron and structural steel, • Platforms, frames, supports, and assemblies, • Shop‐fabricated components for industrial and structural applications Schedule • Day Shift, • Heavy overtime available (and encouraged for those who want it), • Consistent, year‐round work — no project hopping What We’re Looking For • Experience with structural welding (MIG, Flux‐Core, Stick depending on shop), • Ability to read and interpret blueprints and weld symbols, • Strong attention to weld quality and safety, • Reliable attendance and willingness to work overtime, • AWS certification is a plus (not always required) Hiring areas-Anything West of Hwy 75! So many opportunities. Now taking applications! Express Employment Professionals Sand Springs, Ok. 30 East 2nd Street Suite D Sand Springs, Ok. 74063 918-241-3600 Company DescriptionWe offer weekly pay & immediate benefits.We offer weekly pay & immediate benefits.

Job DescriptionJob Title: Pipe Fitter/Certified Pipe Welder Location: Tulsa, OK Shift: Day Shift Pay: $23 to $25/hour (based on experience) Job Description: We are seeking a highly skilled Pipe Fitter/Certified Pipe Welder to join our team in Tulsa, OK. This position requires expertise in GTAW, GMAW, and FCAW processes, with 3–5 years of experience in a high-performance production environment. The ideal candidate will have the ability to pass rigorous weld tests and maintain exceptional quality standards in a 100% X-ray shop. Key Responsibilities: • Perform high-quality pipe fitting and welding with proficiency in GTAW, GMAW, and FCAW processes., • Pass the following weld tests:, • 6G, 2”-S/160, GTAW, • 1G, 6”-S/80, GMAW/FCAW (Combo: MIG Root/Flux Fill and Cap), • Maintain a reject rate of less than 4% in 100% X-ray inspection work., • Read and interpret blueprints, specifications, and work instructions to complete tasks accurately., • Work efficiently to meet production requirements while upholding strict quality standards. Qualifications: • 3–5 years of experience in pipe fitting and welding in a high-performance production environment., • Certification in GTAW, GMAW, and FCAW welding processes., • Ability to pass the required weld tests., • Strong understanding of production workflows and attention to quality control., • Must pass a pre-employment drug screen. Benefits: • Competitive pay starting at $23+/hour based on experience., • Day shift schedule., • Opportunity to work in a demanding yet rewarding environment with a team committed to excellence. If you’re an experienced pipe fitter and certified pipe welder ready to excel in a high-performance shop, apply today! Abundant Solutions 5151 S. Mingo Tulsa, OK 74146

Job Description Currently seeking mig fabrication welders for a Tulsa manufacturing company! If you fit the qualifications and the shift of the job works for you, apply now! Shift: Monday-Thursday 5AM-3:30PM, OT currently being given on Friday and Saturday Pay: $21-25/hour, depending on experience Qualifications: • 1-3 years of experience mig welding on mild steel sheet metal, 14 gauge., • Ability to read and interpret blueprints. -Operate a grinder for finished product. -Reliable and eager to learn/grow. -Ability to follow instruction. Company DescriptionWe offer weekly pay & immediate benefits.We offer weekly pay & immediate benefits.

Job DescriptionWe are looking for new grad welders to fill day shift positions. Since 1967, they've maintained a well- founded 40-year reputation for quality and dependability, and as a leading choice in custom design and fabrication. Pay depends on experience and test $18 - $19Location I-44 & 81st Monday through Thursday 10 hour shifts Friday ALL OT 6:30 AM - 4:30 PM You will not be given a weld test, you will be assisting ASME code welders and learning how to weld. You will be asked to help out welders, not sweep the floors. Must pass background check and pre-employment UA.

Job DescriptionAwesome Fabrication Shop in the heart of Tulsa Oklahoma is seeking Structural Welders for All Shifts!! Pay: Depending on Experience and Shift $20-24/hr What you will be doing: This position will accurately weld gates and parts to dimensional drawings using mig and flux cored processes. The skills and experience you need: High School diploma or GED Previous welding experience or tech school required Must be able to operate equipment safely Must be able to mig weld steel parts Must be able to read a tape measure Must be able to read/interpret drawings May be required to pass tests related to AWS D1.1, D1.1M Structural welding code, AWS D1.3 Structural welding code sheet steel. Apply in Person: 5151 S Mingo Rd, Tulsa OK 74146Send Resume to: Nicole@abundantjobs.com

Job Description Express Employment Professionals in Sand Springs, Oklahoma has multiple welding opportunities available. If you are working and looking for a new opportunity, no problem, we can visit with you by phone. Call us - 918-241-3600 Days, Evenings, and Nights Available. Pay starts up to $25-28 per hour Bump in pay after evaluation period. Job Summary: We are looking to hire Structural Welders in MIG and Flux-Cored Arc Welding (FCAW). One will be responsible for fabricating and welding structural metal components used in manufacturing, and industrial applications. This role requires proficiency welding techniques, and quality control to ensure strong, precise welds that meet industry standards and safety regulations. Key Responsibilities: 1. Welding & Fabrication • Perform MIG (Metal Inert Gas) and Flux-Cored Arc Welding (FCAW) to join structural steel components., • Must be able to work with overhead cranes, forklifts, trucks, and power equipment., • Operate welding equipment, grinders, torches, and cutting tools to prepare materials., • Ensure all welds meet quality standards, including visual and non-destructive testing requirements. 1. Safety & Compliance • Follow all workplace safety procedures, including proper use of personal protective equipment (PPE)., • Operate welding and cutting tools safely to prevent accidents and injuries., • Ensure work areas are clean, organized, and free of hazardous materials., • This position is listed as a Safety Sensitive position. 1. Collaboration & Communication • Work with supervisors, engineers, and fellow welders to meet production deadlines., • Communicate effectively to resolve issues and improve workflow efficiency. Qualifications & Requirements: • High school diploma or GED; trade school or welding certification preferred., • Proven experience as a structural welder, with proficiency in MIG and Flux-Cored welding., • Familiarity with AWS welding codes and industry standards., • Ability to read and interpret blueprints, welding symbols, and work instructions., • Strong attention to detail and ability to produce high-quality welds., • Physical stamina and strength to lift heavy materials and work in various positions., • Ability to work in a fast-paced industrial environment, often in outdoor or high-heat conditions. Apply with us today! 30 East 2nd Street Suite D Sand Springs, Ok. 74063 or call 918-241-3600 to schedule a phone interview or appointment. Please call us if you have any questions regarding pay or shifts! Company DescriptionWe offer weekly pay & immediate benefits.We offer weekly pay & immediate benefits.

Job DescriptionJOB DESCRIPTION Days: Monday - Thursday Hours: 6:00am - 4:30pm, Friday and Saturday overtime as needed 6:00am - 2:15pm Pay: $33 - $34 DOE Products: Waste heat recovery equipment designed and built to ASME Code: waste heat and process gas boilers (firetube boilers, watertube boilers), steam drums, economizers, superheaters, Pressure Vessels WELD TEST(s) • Welding: 6" Sch 80 6G GTAW Stringer / Hot Pass, SMAW Fill and Cap., • 3G FCAW 1/2" Plate test REQUIREMENTS • Experience with Flux Core (FCAW), Stick (SMAW)., • Experience with Tig (GTAW) and / or Submerged arc Welding (SAW)., • Weld in all positions (Flat, Horizontal, Vertical, Overhead)., • Must be able to Pass X-rays and other Non-Destructive testing methods., • Variety of ferrous and non-ferrous materials, Carbon, Stainless, Chrome and Nickel alloys., • All work must meet ASME Code, Company and Client requirements,, • Perform other shop labor tasks as needed., • Weld in many positions (overhead, flat, horizontal, vertical), • Proficient using Carbon arc gouge and cutting torch., • Read and understand drawings and welding procedures, • Perform other shop labor tasks as needed., • 5 Plus years of experience in a manufacturing setting required.

Job Description Job Title: Structural Welder Start with a steady shop, solid work, and long-term opportunity. We’re hiring Structural Welders to join a busy shop with consistent work. If you know how to run MIG and Flux, read prints, and handle out-of-position welds, this is a place where you can stay busy and build a career. What You’ll Be Doing Weld structural components using MIG and Flux core Run welds in 3G (vertical), 4G (overhead), and flat/horizontal positions Read blueprints and shop drawings to lay out work Set machine settings (voltage/amp) based on material and weld specs Fit and prep materials using saws, grinders, and hand tools Align and clamp parts before welding Inspect welds and clean up work as needed Keep equipment and work area safe and in working condition What We’re Looking For Experience with MIG and Flux welding Ability to read a tape measure and blueprints Comfortable welding out of position (3G / 4G) Hands-on experience in a structural or fabrication shop At least 6–8 months of welding experience Nice to Have Structural fitting experience Experience using grinders, torches, and shop tools Strong work ethic and ability to stay productive Why You’ll Want This Job Steady workload — no worrying about hours getting cut Family-owned company with long-term stability (since 1973) Good leadership that takes care of their people Opportunities for growth and long-term employment Full benefits including medical, dental, and vision Shift differentials available Work Environment & Schedule Structural welding shop on a large, active campus Non-climate controlled — real shop environment 1st Shift: Monday – Friday, 5:00 AM – 3:30 PM Second Shift Mon-Thurs, 3:30pm-4:00am Physically active work — lifting, welding, grinding throughout the shift Job Type & Location This is a Contract position based out of Tulsa, OK. Pay and Benefits The pay range for this position is $19.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tulsa,OK. Application Deadline This position is anticipated to close on Jun 12, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Job Title: Structural Welder Start with a steady shop, solid work, and long-term opportunity. We’re hiring Structural Welders to join a busy shop with consistent work. If you know how to run MIG and Flux, read prints, and handle out-of-position welds, this is a place where you can stay busy and build a career. What You’ll Be Doing Weld structural components using MIG and Flux core Run welds in 3G (vertical), 4G (overhead), and flat/horizontal positions Read blueprints and shop drawings to lay out work Set machine settings (voltage/amp) based on material and weld specs Fit and prep materials using saws, grinders, and hand tools Align and clamp parts before welding Inspect welds and clean up work as needed Keep equipment and work area safe and in working condition What We’re Looking For Experience with MIG and Flux welding Ability to read a tape measure and blueprints Comfortable welding out of position (3G / 4G) Hands-on experience in a structural or fabrication shop At least 6–8 months of welding experience Nice to Have Structural fitting experience Experience using grinders, torches, and shop tools Strong work ethic and ability to stay productive Why You’ll Want This Job Steady workload — no worrying about hours getting cut Family-owned company with long-term stability (since 1973) Good leadership that takes care of their people Opportunities for growth and long-term employment Full benefits including medical, dental, and vision Shift differentials available Work Environment & Schedule Structural welding shop on a large, active campus Non-climate controlled — real shop environment 1st Shift: Monday – Friday, 5:00 AM – 3:30 PM Physically active work — lifting, welding, grinding throughout the shift Job Type & Location This is a Contract position based out of Tulsa, OK. Pay and Benefits The pay range for this position is $19.00 - $25.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Tulsa,OK. Application Deadline This position is anticipated to close on Jun 5, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Class B Welder (ASME Pressure Vessel / Boiler Fabrication).Class B Welder (ASME Pressure Vessel / Boiler Fabrication) Must-Have Requirements.Sch 80 6G GTAW (TIG) root/hot pass + SMAW fill/cap.Experience with FCAW (Flux Core) and SMAW (Stick) required.Experience with GTAW (TIG) and/or SAW (Submerged

Job Description Okie Staffing is seeking a skilled Brazing/Welding Technician. This position involves performing various welding tasks including MIG, TIG, and Stick welding on metal structures and components for diverse industries. This position will require component repairs utilizing welding equipment and brazing equipment. TIG welding on stainless steel and aluminum. Brazing on nickel and copper alloy. The ideal candidate will have strong welding skills, attention to detail, and the ability to read and interpret blueprints and welding symbols. Safety and quality are top priorities in this role. Key Responsibilities • Perform MIG, TIG, and Stick welding on metal parts and assemblies, • Read and interpret blueprints, welding symbols, and work instructions, • Inspect welded joints to ensure quality and adherence to specifications, • Maintain welding equipment and workspace in a safe and clean condition, • Follow all OSHA and company safety protocols, • Collaborate with team members to meet production goals Requirements • Proven experience as a welder, proficient in MIG, TIG, and Stick welding, • Welding/brazing experience on nickel, stainless steel, aluminum, and copper preferred., • Ability to read and interpret blueprints and welding symbols, • Ability to pass TIG welding assessment on stainless steel and aluminum., • Ability to demonstrate proper brazing techniques., • Hands on production using small hand tools and shop equipment., • Mechanically inclined and detail oriented, • Strong attention to detail and quality workmanship, • Knowledge of welding safety practices and procedures, • Ability to work independently and as part of a team, • Welding certifications preferred but not required, • Mathematical Skills: Basic math skills, • ·Reasoning Abilities: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram or schedule form. Benefits 2nd Shift position 3:30 pm – 12:00 am Monday – Friday. OT as required. Pay 20.00 plus overtime

Job Description Tulsa Tube Bending is looking for TIG welders. Must be able to pass a 2" XXH pipe test (6G or Roll out) with visual inspection and x-ray. Essential Job Duties • Weld on, and operate a turntable/pinwheel., • Fit up of flanges, wear-backs, stubs, pipe coils and other various fabricating applications., • Grind with flat grinder and pencil grinder., • Use a cutting torch., • Structural welding of pipe, plate and square tubing., • Weld special tooling., • Operate lift crane safely., • Operate a fork truck safely., • Read and understand blueprints/engineering drawings., • Follow attendance requirements; meet scheduled hours or work., • Follow safety and good housekeeping regulations., • Other duties as assigned. Skills and Abilities • Ability to interpret drawings and blueprints correctly., • Read and follow weld procedures., • Communicate clearly with co-workers and supervisors., • Ability to handle multiple job assignments., • Accurately read a tape measure to 1/32 of an inch., • Read, understand and follow instructions on shop work orders., • Maintain a low rate of rework., • Ability to run carbon arc, MIG, stick, TIG and flux core welding. Drug testing required - Must be 18 yrs old - Must have a valid Driver's License - Must have HS diploma or GED Company DescriptionTulsa Tube Bending is the national industry leader! The company is considered by many to be a world-class example of manufacturing in the U.S., and an engaged employee-focused culture with Lean manufacturing implementation. The company's Lean journey has more than doubled company-wide productivity and is approaching tripling productivity. This transformation was the basis for receiving many awards, including: Tulsa Metro Chamber Family-Owned Business of the Year, Governor's Manufacturing Excellence Award, Governor's Manufacturing Advocacy Award, multiple Fortune 100 Key Supplier awards, Milliman Grand Champion Best in Employee Benefits Award, and the United States Chamber of Commerce Small Business of the Year Award.Tulsa Tube Bending is the national industry leader! The company is considered by many to be a world-class example of manufacturing in the U.S., and an engaged employee-focused culture with Lean manufacturing implementation. The company's Lean journey has more than doubled company-wide productivity and is approaching tripling productivity. \r\n\r\nThis transformation was the basis for receiving many awards, including: Tulsa Metro Chamber Family-Owned Business of the Year, Governor's Manufacturing Excellence Award, Governor's Manufacturing Advocacy Award, multiple Fortune 100 Key Supplier awards, Milliman Grand Champion Best in Employee Benefits Award, and the United States Chamber of Commerce Small Business of the Year Award.

Job Description Now Hiring TIG Welders – Tulsa, OK | $25+ DOE We’re actively seeking skilled aerospace, TIG Welders, for a great opportunity in Tulsa. Specifically, TIG welders that can weld on aluminum castings. If you’re experienced, dependable, and ready to get to work — we want to hear from you! Hours: Monday-Thursday from 7AM-4PM and Friday from 7AM-4PM What We’re Looking For: • Proven experience with TIG welding, • Ability to read and interpret blueprints/weld symbols, • Strong attention to detail and safety, • Reliable and punctual work ethic Company DescriptionWe offer weekly pay & immediate benefits.We offer weekly pay & immediate benefits.

Job DescriptionCombo TIG Welder – 1st & 2nd Shift Pay: $27+/hr (DOE) Location: Tulsa, OK A growing Tulsa manufacturer is seeking experienced Combo TIG Welders who take pride in precision work and can perform at a high level. Climate-controlled shop. This is a great opportunity for welders looking for stability, strong pay, and excellent benefits. Weld Test RequirementCandidates must pass a hands-on weld test: • 2G Position Test, • TIG root, flux core fill & cap, • Pulse MIG root, fill & cap, • Estimated Test Time: 4–5 hours Why This Opportunity Stands Out • Climate-controlled facility – work comfortably year-round, • Competitive pay starting at $27+ per hour (DOE), • Full benefits package, • Steady work with a respected, growing company, • Challenging, skill-based welding workAvailable Shifts, • 1st Shift, • 2nd ShiftWhat You’ll Do, • Perform TIG welding (root) with high precision, • Complete flux core fill and cap, • Execute pulse MIG welding (root, fill, and cap), • Read and interpret blueprints and weld symbols, • Set up, fit, and weld components to spec, • Maintain quality standards and ensure clean welds with minimal defects Requirements • Minimum 3+ years of TIG welding experience, • Proven experience with combo welding (TIG, MIG, Flux Core), • Ability to pass a multi-process weld test, • Strong blueprint reading and measuring skills, • Commitment to quality and consistencyWhat We’re Looking For, • Welders who can handle complex welds, not just basic production, • Candidates confident in multi-process welding environments, • Individuals who take ownership of their work and show attention to detail Apply with a detailed, updated resume for consideration. Abundant Solutions 5151 S. Mingo Rd., Tulsa, OK 74146 918-749-6999

Job DescriptionWelder (MIG) – Climate-Controlled Shop | Tulsa, OK Pay: DOE + 11.5% Shift Premium A growing Tulsa manufacturer is seeking experienced Welders who take pride in quality work and consistency. This role offers a clean, climate-controlled environment and steady schedules with built-in long weekends. Why This Role Stands Out • Climate-controlled shop, • Consistent schedules with extended weekends, • 11.5% shift premium on all hours worked, • Work on higher-quality components vs. repetitive production Available Shifts • 2nd Shift: Monday – Thursday, 3:30 PM – 2:00 AM, • 3rd Shift: Friday – Sunday, 6:00 AM – 6:00 PM (11.5% premium applies to all hours on both shifts) Key Responsibilities • Perform MIG welding on sheet metal components (TIG as needed), • Set up parts using fixtures, jigs, and tables, • Weld carbon steel, stainless steel, and other alloys, • Read and interpret blueprints to meet specifications, • Use measuring tools (calipers, micrometers, gauges), • Identify and correct weld defects to maintain quality standards Qualifications • MIG welding experience on carbon steel and stainless (required), • TIG welding experience is a plus, • Fitter/welder background preferred, • Ability to read blueprints and measure accurately, • Strong attention to detail and problem-solving skills, • Basic computer skills Physical Requirements • Ability to stand, bend, squat, and move throughout shift, • Lift up to 50 lbs (with assistance when needed), • Comfortable working in confined or tight spaces Apply with a detailed, updated resume for consideration. Abundant Solutions 5151 S. Mingo Rd., Tulsa, OK 74146 918-749-6999

Job DescriptionStructural Welders Needed in West Tulsa!Position SummaryWe are seeking experienced Structural Welders to join our team. This role is responsible for welding structural steel components used in large-scale fabrication projects while ensuring strength, durability, and compliance with specifications. Candidates must be proficient in structural welding processes and capable of working from blueprints and weld symbols.Key Responsibilities• Read and interpret blueprints, structural drawings, and weld symbols • Perform structural welds on beams, columns, and other steel components, • Utilize Stick (SMAW), MIG (GMAW), and Flux-Core (FCAW) welding processes, • Ensure welds meet structural codes and quality standards, • Operate grinders, torches, and other fabrication tools, • Inspect welds for defects and ensure structural integrity, • Maintain proper alignment and fit-up of structural components, • Follow all safety procedures and company guidelinesQualifications• Proven experience as a structural welder or similar role, • Strong proficiency in Stick, MIG, and Flux-Core welding, • Ability to read and interpret blueprints and structural drawings, • Knowledge of weld symbols and structural welding techniques, • Ability to work long hours, including overtime and weekends, • Strong attention to detail and commitment to quality, • Reliable transportation and consistent attendancePreferred Qualifications• Experience working with heavy structural steel, • Familiarity with fabrication tools and equipment, • Previous experience in a manufacturing or construction environment, • Ability to work independently and as part of a teamPay: $18–$30/hour (DOE) Schedule: 6:00 AM – 6:00 PM or 6:00 PM – 6:00 AM Workweek: 6 days per week (overtime required)Abundant Solutions 5151 S Mingo Rd Suite D Tulsa, OK 74146Send resumes to ashley@abundantjobs.com

Job Description TIG Welder – PM Shift 3pm -11:30pm Pay: $26.00–$29.00/hour DOE Shift Differential: +$1.00/hour for PM shift Shift: PM Shift (plate weld test required) Hours: Full-time with overtime opportunities based on production demand A growing Tulsa manufacturing facility has been awarded new contractual work for 2026 and is expanding its PM shift team. This is an excellent opportunity for skilled TIG welders seeking steady hours, competitive pay, and long-term stability in a production welding environment. Job Responsibilities: Perform TIG welding on plate and fabricated components to specification Read and interpret blueprints, weld symbols, and fabrication drawings Maintain weld quality and meet production standards Inspect completed welds for accuracy and quality Work with stainless steel and aluminum materials Follow all safety and quality procedures Requirements: Recent TIG welding experience on plate required Ability to pass a plate weld test Strong blueprint reading and weld symbol interpretation skills Experience in a fabrication or manufacturing environment preferred Reliable attendance and strong work ethic Ability to work assigned PM shift consistently This company is experiencing strong growth and offers stable, long-term work for dependable welders who take pride in their craft. Apply with a detailed, updated resume for consideration. Abundant Solutions 5151 S. Mingo Rd., Tulsa, OK 74146 918-749-6999

We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems.

Excellent mechanical aptitude required. Ability to read and understand mechanical (CAD) drawings.

Job DescriptionJOB DESCRIPTION Days: Monday - Thursday Hours: 6:00am - 4:30pm, Friday and Saturday overtime as needed 6:00am - 2:15pm Pay: $34 - 36 DOE Products: Waste heat recovery equipment designed and built to ASME Code: waste heat and process gas boilers (firetube boilers, watertube boilers), steam drums, economizers, superheaters, Pressure Vessels WELD TEST(s) • Welding: 6" Sch 80 6G GTAW Stringer / Hot Pass, SMAW Fill and Cap., • 3G FCAW 1/2" Plate test• Fitter Test REQUIREMENTS • Read, interpret, and understand drawings and welding procedure requirements., • Perform basic and advanced math functions., • Ability to Layout, Cut, Fit and Tack pressure and non-pressure parts. Including but not limited to cylinders, nozzles, tubes, tubesheets, headers, structural components,, • Utilize leveling equipment to ensure orientation accuracy., • Experience in Flux Core (FCAW), Stick (SMAW), and Tig (GTAW)., • Submerged arc welding a plus but not required., • Weld in all positions (Flat, Horizontal, Vertical, Overhead)., • Must be able to Pass X-rays and other Non-Destructive testing methods., • Variety of ferrous and non-ferrous materials: Carbon, Stainless, Chrome, and Nickel Alloys., • Proficient using Carbon arc gouge and cutting torch., • All work must meet ASME Code, Company and Client Requirements., • Perform other shop labor tasks as needed., • 5 Plus years of experience in a manufacturing setting required.