Welder jobs in San Diego, CaliforniaCreate job alerts

Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards Three years experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills. Must pass NASSCO's plate test in all positions and pipe test on 6G restricted fix position using FCAW and GTAW processes. Must be certified to operate high reaching equipment. Must have ability to work at heights, in confined spaces, and be available to work any shift. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Essential Job Tasks 1. Set up tools, welding equipment and supplies at job site, 2. Burns pipe or penetrations., 3. Tacks and welds pipe., 4. Cleans weld area; sweeps and removes scrap., 5. Other job duties as may be assigned relevant to the trade. Materials, Tools Equipment, Work Aids Welding leads, welding machinery, ventilation hose, tool bag, ladder, grinders, mini grid, burning leads, cutting torches, chipping hammers, welding stingers, and personal protective equipment. Physical/Mental Involvement Frequent to continuous lifting of welding equipment. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. Marginal Job Tasks General housekeeping in work areas. May be required to attend safety, quality and/or process improvement meetings. Environmental Factors Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties. Exposure to constantly moving machines and mechanical parts and high levels of constant noise. PAY SCALE $35.36 - $38.71 This pay range is a reasonable estimate of the hourly range for this role. It takes into account the wide range of factors considered in making compensation decisions; including but not limited to skill sets, experience, training, and education. General Dynamics NASSCO also provides a variety of benefits including medical & dental insurance coverage, 401(k) retirement savings plan, flexible spending accounts/HSAs, life and disability insurance, company paid holidays and paid time off (PTO), wellness coaching, and an onsite health services. General Dynamics NASSCO is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law. To learn more about applicant rights under federal law, click here: Know Your Rights: Workplace Discrimination is Illegal If you have a disability that impacts your ability to complete the job application process and would like to request an accommodation, please contact our Human Resources Department. Call (619) 544-8511 or email [email protected]. This contact information is for accommodation requests only, not to inquire about the status of applications. NASSCO is an Equal Opportunity / Individuals with Disabilities / Protected Veterans Employer

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. We offer an excellent benefits package including \n • A competitive salary\n, • Medical, dental, vision, life, and disability insurance\n, • Paid-time off\n, • Tuition reimbursement\n, • 401k Retirement Plan\n, • Military Reserve pay offset\n, • Paid maternity leave\n\n Pay range: $36.00 - $54.00 Education and Experience: \n • High School Diploma or GED\n, • A minimum of five to six years of applicable welding experience\n, • ASNT NDT Level III Certification or relevant experiencepreferred.\n, • One (1) other relevant technical certification or qualification such as American Welding Society (AWS) Certified Welding Supervisor, AWS Certified Weld Inspector, or other preferred.\n\n Skills and Proficiencies: \n • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Supervisory and leadership skills\n\n Safety and Physical Requirements: (have or obtain the following certifications) \n • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Training and the Ability to Safely Lift and Move Objects of 50 LBS \n\n Security and Work Locations: \n • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • You must have a valid driver's license\n, • This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy.\n\n Other Responsibilities: \n • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in San Diego, CA and Chesapeake, VA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: \n • High School Diploma or GED\n, • A minimum of three to four years of applicable welding experience\n, • ASNT NDT Level III Certification preferred.\n, • One (1) other relevant technical certification or qualification such as American Welding Society (AWS) Certified Welding Supervisor, AWS Certified Weld Inspector, or other preferred.\n\n Skills and Proficiencies: \n • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Supervisory and leadership skills\n\n Safety and Physical Requirements: \n • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Training and the Ability to Safely Lift and Move Objects of 100 LBS \n\n Security and Work Locations: \n • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities.You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • You must have a valid driver's license\n, • This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy.\n\n Other Responsibilities: \n • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Pay range: $28.80 - $43.20 We offer an excellent benefits package including \n • A competitive salary\n, • Medical, dental, vision, life, and disability insurance\n, • Paid-time off\n, • Tuition reimbursement\n, • 401k Retirement Plan\n, • Military Reserve pay offset\n, • Paid maternity leave\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n\n Possible travel locations include the below but not limited to: \n • San Diego, CA\n, • Vallejo, CA\n, • Everett, WA\n, • Seattle, WA\n, • Portland, OR\n, • Groton, CT\n, • Mayport, FL\n, • Panama City, FL\n, • Charleston, SC\n, • Pearl Harbor, HI\n, • Portland, OR\n, • Earl, NJ\n, • Guam\n

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in Chesapeake, VA, and San Diego, CA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. We offer an excellent benefits package including \n • A competitive salary\n, • Medical, dental, vision, life, and disability insurance\n, • Paid-time off\n, • Tuition reimbursement\n, • 401k Retirement Plan\n, • Military Reserve pay offset\n, • Paid maternity leave\n\n Pay range: $36.00 - $54.00 Education and Experience: \n • High School Diploma or GED\n, • A minimum of five to six years of applicable welding experience\n, • ASNT NDT Level III Certification or relevant experiencepreferred.\n, • One (1) other relevant technical certification or qualification such as American Welding Society (AWS) Certified Welding Supervisor, AWS Certified Weld Inspector, or other preferred.\n\n Skills and Proficiencies: \n • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Supervisory and leadership skills\n\n Safety and Physical Requirements: (have or obtain the following certifications) \n • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Training and the Ability to Safely Lift and Move Objects of 50 LBS \n\n Security and Work Locations: \n • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities. You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • You must have a valid driver's license\n, • This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy.\n\n Other Responsibilities: \n • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n

Job DescriptionBenefits/Perks • Competitive Pay Job SummaryWe are seeking a skilled Welder to join our team. In this position, you will need accurately weld structural components and parts, in a residential complex. This is an integral part of the construction process, as it provides a strong infrastructure foundation. The ideal candidate is a hard worker with great attention to detail and proven experience as a Welder. Knowledge of local building codes for railings and handrails. Responsibilities • Plan layout and measurements of structural components, • Interpret requirements to select the most appropriate welding equipment for the job, • Operate angle grinders, calipers, rulers, and other hand and power tools, • Use manual and semi-automatic welding equipmentQualifications, • Previous experience as a Welder, • Professional Certification (AWS welding certificate) is preferred, • Experience with a variety of welding equipment and tools, • Understanding of all health and safety guidelines, • Attention to detail

Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks as assigned, some of which may become essential to the position. Qualifications Standards Previous experience or training is required. Must be able to qualify in two gas shielded FCAW welding processes 71T-1 and 811N3 in the three positions. Knowledge of welding characteristics of metal. Must be able to work at heights, confined spaces, and any assigned shift. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Essential Job Tasks 1. Welds parts in position for fabrication of vessels, tanks or other structural assemblies., 2. Uses carbon electrodes to cut, shape and groove metal., 3. May prepare workplace for welding by cleaning and/or preheating., 4. Examines weld sizes of weld beads., 5. Cleans weld area; sweeps and removes scrap., 6. Other job duties as may be assigned relevant to the trade. Materials, Tools, Equipment, Work Aids Welding machinery, hand tools, high reach equipment and semi auto equipment. Personal protective equipment required. Physical/Mental Involvement Frequent to continuous lifting of welding equipment. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. Marginal Job Tasks General housekeeping in work areas. May be required to attend safety, quality and/or process improvement meetings. Environmental Factors Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties. Exposure to constantly moving machines and mechanical parts and high levels of constant noise. PAY SCALE $33.76 - $37.11 This pay range is a reasonable estimate of the hourly range for this role. It takes into account the wide range of factors considered in making compensation decisions; including but not limited to skill sets, experience, training, and education. General Dynamics NASSCO also provides a variety of benefits including medical & dental insurance coverage, 401(k) retirement savings plan, flexible spending accounts/HSAs, life and disability insurance, company paid holidays and paid time off (PTO), wellness coaching, and an onsite health services. General Dynamics NASSCO is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law. To learn more about applicant rights under federal law, click here: Know Your Rights: Workplace Discrimination is Illegal If you have a disability that impacts your ability to complete the job application process and would like to request an accommodation, please contact our Human Resources Department. Call (619) 544-8511 or email [email protected]. This contact information is for accommodation requests only, not to inquire about the status of applications. NASSCO is an Equal Opportunity / Individuals with Disabilities / Protected Veterans Employer

Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds a variety of metal surfaces or pipe using various types of welding equipment. Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards Three years experience in welding, knowledge of welding procedures, and various types of welding equipment, proficient in flat, vertical, overhead, and horizontal arc, SMAW and flux-core, tig welding and air arc skills. Must pass NASSCO's plate test in all positions and pipe test on 6G restricted fix position using FCAW and GTAW processes. Must be certified to operate high reaching equipment. Must have ability to work at heights, in confined spaces, and be available to work any shift. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Essential Job Tasks 1. Set up tools, welding equipment and supplies at job site, 2. Burns pipe or penetrations., 3. Tacks and welds pipe., 4. Cleans weld area; sweeps and removes scrap., 5. Other job duties as may be assigned relevant to the trade. Materials, Tools Equipment, Work Aids Welding leads, welding machinery, ventilation hose, tool bag, ladder, grinders, mini grid, burning leads, cutting torches, chipping hammers, welding stingers, and personal protective equipment. Physical/Mental Involvement Frequent to continuous lifting of welding equipment. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. Marginal Job Tasks General housekeeping in work areas. May be required to attend safety, quality and/or process improvement meetings. Environmental Factors Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties. Exposure to constantly moving machines and mechanical parts and high levels of constant noise. PAY SCALE $35.36 - $38.71 This pay range is a reasonable estimate of the hourly range for this role. It takes into account the wide range of factors considered in making compensation decisions; including but not limited to skill sets, experience, training, and education. General Dynamics NASSCO also provides a variety of benefits including medical & dental insurance coverage, 401(k) retirement savings plan, flexible spending accounts/HSAs, life and disability insurance, company paid holidays and paid time off (PTO), wellness coaching, and an onsite health services. General Dynamics NASSCO is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law. To learn more about applicant rights under federal law, click here: Know Your Rights: Workplace Discrimination is Illegal If you have a disability that impacts your ability to complete the job application process and would like to request an accommodation, please contact our Human Resources Department. Call (619) 544-8511 or email [email protected]. This contact information is for accommodation requests only, not to inquire about the status of applications. NASSCO is an Equal Opportunity / Individuals with Disabilities / Protected Veterans Employer

Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance required Job Summary Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks as assigned, some of which may become essential to the position. Qualifications Standards Previous experience or training is required. Must be able to qualify in two gas shielded FCAW welding processes 71T-1 and 811N3 in the three positions. Knowledge of welding characteristics of metal. Must be able to work at heights, confined spaces, and any assigned shift. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Essential Job Tasks \n • Welds parts in position for fabrication of vessels, tanks or other structural assemblies.\n, • Uses carbon electrodes to cut, shape and groove metal.\n, • May prepare workplace for welding by cleaning and/or preheating.\n, • Examines weld sizes of weld beads.\n, • Cleans weld area; sweeps and removes scrap.\n, • Other job duties as may be assigned relevant to the trade.\n\n Materials, Tools, Equipment, Work Aids Welding machinery, hand tools, high reach equipment and semi auto equipment. Personal protective equipment required. Physical/Mental Involvement Frequent to continuous lifting of welding equipment. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. Marginal Job Tasks General housekeeping in work areas. May be required to attend safety, quality and/or process improvement meetings. Environmental Factors Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties. Exposure to constantly moving machines, mechanical parts, and high levels of constant noise. PAY SCALE $33.76 - $37.11 This pay range is a reasonable estimate of the hourly range for this role. It takes into account the wide range of factors considered in making compensation decisions; including but not limited to skill sets, experience, training, and education. General Dynamics NASSCO also provides a variety of benefits including medical & dental insurance coverage, 401(k) retirement savings plan, flexible spending accounts/HSAs, life and disability insurance, company paid holidays and paid time off (PTO), wellness coaching, and an onsite health services. General Dynamics NASSCO is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law. To learn more about applicant rights under federal law, click here: now Your Rights: Workplace Discrimination is Illegal If you have a disability that impacts your ability to complete the job application process and would like to request an accommodation, please contact our Human Resources Department. Call (619) 544-8511 or email [email protected]. This contact information is for accommodation requests only, not to inquire about the status of applications. NASSCO is an Equal Opportunity / Individuals with Disabilities / Protected Veterans Employer

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement, • Employee Assistance Program (EAP) *Benefit eligibility is set forth in benefit plan documents and organization policies. Description Position Location: Chula Vista, CA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. • Applies basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials., • Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer), • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed;, • May position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools;, • Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials., • Maintain certification in the welding procedure(s) as required by Quality Assurance Manager., • Fill out Objective Quality Evidence (OQE) forms, • Follow Quality Assurance welding procedures, • Performs all work in accordance with established safety procedures., • Participates in special projects as required.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Typically requires 1+ years related experience., • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures., • Skill to make complete penetration and complete fusion welds., • Read and understand blueprints and specifications.\n\n Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Equipment: • General Hand Tools, • Welding Machines, • Precision Measuring Instruments, • Pneumatic and Electric Hand Tools, • Knowledge, Skills and Other Abilities:, • Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of welding procedures and tools., • Knowledge of welding shrinkage, welding techniques and physical properties of metal., • Ability to qualify using welding procedures on plate and/or pipe., • Must be able to pass Workmanship Inspection training., • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $21.83 - $38.00 In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number WEL-26-00008 This position is currently accepting applications.

Job DescriptionStructural Specialty WelderLocation: San Diego, CA (Shipyard & Shop Operations) Position Type: Full-Time / Journeyman Industry: Marine Staffing & Ship Repair Position OverviewWe are seeking a highly skilled Journeyman Structural Specialty Welder to support mechanical repairs, structural modifications, and modernization projects across marine vessels, including US Naval, Military Sealift Command (MSC), and commercial ships.In this role, you will be responsible for welding pipe and structural components of various metals on-board ships or within the shop environment. As a journeyman, you will also be expected to provide clear direction, mentorship, and safety oversight to assigned welding helpers and fire watches. Key Responsibilities & Work Tasks • Production Welding: Perform high-quality welding on pipe and structural components utilizing various metals. Maintain a thorough understanding of SMAW, FCAW, and GMAW theory., • Area Preparation & Safety: Inspect and prepare work areas for hot work. Ensure gas-free certifications and lock-out/tag-out (LOTO) procedures are accurate, up to date, and strictly enforced before striking an arc., • Quality & Documentation: Inspect your own welds for defects and provide Objective Quality Evidence (OQE) as required by technical specifications. Document daily conditions and unexpected deficiencies using written Condition Found Reports (CFRs), including recommended corrective actions., • Team Leadership: Provide daily task direction and safety guidance to assigned pipe welding helpers and Fire Watches., • Site Management: Maintain a clean, orderly, and safe work environment throughout the shift, complying fully with OSHA standards and shipyard safety best practices.Required Qualifications & Experience, • Experience: Minimum of four (4) years of marine pipe and structural welding experience in a shipyard or heavy industrial marine environment., • Weld Test Requirements: Must be able to successfully pass specialized Alum, CuNi, Stainless, or TIG weld tests., • Technical Certifications: Must be able to certify in P-3 joints with permanent backing rings and P-14 socket weld joints using:, • SMAW, • GTAW (TIG), • FCAW OR Silver Brazing, • Blueprint Reading: Ability to comprehend, interpret, and work from complex blueprints, drawings, technical specifications, and Navy/MSC/ABS standard items and manuals., • Marine Knowledge: Working knowledge of ship repair terminology, ship compartment naming conventions, and structural layouts., • Math Skills: Proficiency in basic math, including adding, subtracting, multiplying, and dividing whole numbers, fractions, and decimals using both US customary and metric systems., • Tools: Proficiency in operating, troubleshooting, and caring for welding equipment, portable power tools, and standard trade hand tools.Physical Demands & Work EnvironmentShipyard work is physically demanding and takes place in a dynamic, heavy-industrial environment. Candidates must be physically and medically capable of meeting the following demands:, • Environmental Conditions: Comfort working in a variety of environments, ranging from normal shop conditions to outdoor docks and interior ship compartments that may be smoky, hot, cold, or have low illumination., • Confined Spaces & Heights: Ability to access tight work areas through 18” x 36” manhole openings and work in confined spaces or at heights above 12 feet (from ladders, scaffolding, and manlifts)., • Physical Strength: Ability to lift, push, or pull up to 75 lbs occasionally, and up to 20 lbs frequently., • Mobility: Ability to stand for prolonged periods (2-3 hours), bend, squat, crawl, kneel, climb, and maintain good balance on uneven surfaces., • PPE Compliance: Full medical and physical capability to wear all required Personal Protective Equipment (PPE) under OSHA standards, including hard hats, steel-toe boots, safety glasses, respirators, safety harnesses, and flotation gear.Employment PoliciesWe are a proud Equal Opportunity Employer. All personnel are expected to comply with the Company’s Non-Discrimination and Anti-Harassment Policy, ensuring a professional, businesslike workplace free of bias, prejudice, and harassment.Company Description“At LEAD, your career is our top priority. As a leading recruiting partner, we're dedicated to connecting talented job seekers with exciting opportunities and rewarding careers across a variety of dynamic industries. Our team takes the time to understand our employee's unique skills, experience, and professional goals. We then leverage our extensive network and industry expertise to match them with the perfect fit - whether that's a short-term project, long-term contract, or a permanent role. Employee's don't just settle for just any job - they partner with LEAD and unlock a world of rewarding possibilities for themselves. Apply today and let us help you find the perfect fit.”“At LEAD, your career is our top priority. As a leading recruiting partner, we're dedicated to connecting talented job seekers with exciting opportunities and rewarding careers across a variety of dynamic industries. Our team takes the time to understand our employee's unique skills, experience, and professional goals. We then leverage our extensive network and industry expertise to match them with the perfect fit - whether that's a short-term project, long-term contract, or a permanent role. Employee's don't just settle for just any job - they partner with LEAD and unlock a world of rewarding possibilities for themselves. Apply today and let us help you find the perfect fit.”

Job DescriptionLabor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Please send us a text if we don't answer Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Must pass the Alum, CuNi, Stainless or TIG weld test This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd shift only 40 hours a week / OT on approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Labor One is hiring Journey-Level Structural Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Please send us a text if we don't answer Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description:This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 1. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 2. Must possess a working knowledge of welding equipment and work processes used in marine welding., 3. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 4. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 5. Must understand the US customary and metric measurement system., 6. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments. 6. Comply with OSHA standards and shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 9. Carry out written or oral instructions. Confer with the supervisor to resolve unexpected events related to your assigned task. Work Tasks Include: a. Prepare work area for hot work, including checking hot work certifications at the work site and adjacent areas. b. Prepare surfaces for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions. e. Become familiar with applicable safety requirements before commencing work. f. Ensure Lock-out Tag-out has been correctly accomplished. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description OUR CORE PILLARS: Safety | Operational Excellence | Shareholder Value Propulsion Controls Engineering has a job opening for a Planner / Scheduler II, with a Minimum of five years of experience with scheduling processes; supporting our San Diego, CA location. Job Summary A Planner / Scheduler II is responsible for the developing and maintaining production schedules. Organizes, structures, and tracks, tasks, resources and milestones based upon contractual data. Essential Duties and Responsibilities • Accurately manages a Primavera P6 (Oracle) Project Schedule ensuring daily up-to-date revision, • Effectively builds and maintains organized Projects to include sub-tier tasks, milestones, predecessors, and resource allocation as necessary to provide an accurate illustration of both current and future production obligations., • Remains current with Oracle Project scheduling. Has knowledge of Microsoft Excel Spreadsheets applications and can interface with legacy Microsoft Project schedules., • Provides detailed reports, charts, and schedules for review daily or when requested., • Other duties as may be assigned. Position Requirement Education: • High School and/or advanced technical schooling preferred., • Formal training in the application of Project Management Programs (e.g. Primavera P6 and MS Project) Experience and Knowledge: • Minimum of (5) years of experience with scheduling processes., • Trade Experience within the ship repair/shipyard industry, particularly machinery, preferred., • Possess a general knowledge of trades associated within the ship repair industry, (i.e., welder, pipe fitter, outside/inside machinist, electrician, etc.), • Must be reliable, self-disciplined and motivated., • Possess excellent communication skills; as both a listener and when providing direction. Benefits: • Health Insurance (medical, dental, vision, company paid life insurance, voluntary plans such as supplemental life insurance, critical illness, and hospital indemnity), • Paid Time Off, • Company paid holidays, • Retirement savings plan (401(k) plan with company matching and an Employee Stock Ownership Plan), • Career development opportunities PLANNER II EEO/AA/Vet/Disabled #zr

Job Description Labor One is Structural Welders for Ship Repair project in San Diego, California. (4) years of welding experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Please send us a text if we don't answer Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Description: This position is responsible for accomplishing, with minimal supervision, production welding on a ship or in a shop to support structural repairs and modernization of marine vessels including US Naval Vessels, Military Sealift Command, and commercial ships. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information to the supervisor., 5. Must understand SMAW, FCAW, and GMAW., 6. Must be able to certify in all positions: • SMAW Full Penetration weld with permanent backing (ceramic and metal), • FCAW Full Penetration weld with permanent backing (ceramic and metal), • GMAW Full Penetration weld with permanent backing (ceramic and metal) 1. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standards manuals., 2. Must possess a working knowledge of welding equipment and work processes used in marine welding., 3. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 4. Be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals., 5. Must understand the US customary and metric measurement system., 6. Must have up to four (4) years of welding experience in a related field. DUTIES AND RESPONSIBILITIES 1. Communicate with and provide direction to the welding helper and fire watch as needed to complete the assigned tasks., 2. Communicate explicitly with the Fire Watch and do not commence hot work until the area is ready in accordance with fire prevention protocol. ., 3. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and your supervisor., 4. Work shifts and overtime as assigned., 5. Be accountable for completion of daily work assignments.6. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 9. Carry out written or oral instructions. Confer with the supervisor to resolve unexpected events related to your assigned task. Work Tasks Include: a. Prepare work area for hot work, including checking hot work certifications at the work site and adjacent areas. b. Prepare surfaces for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions. e. Become familiar with applicable safety requirements before commencing work. f. Ensure Lock-out Tag-out has been correctly accomplished. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 3rd Shift 40 hours a week/OT on approval Testing 2G/3G Flux Core (2 plates Only) Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description TIG Welder HOW TO APPLY - Go to www.basilestudio.com/careers and, fill out the application form on the bottom of the page. Basile Studio is seeking a skilled TIG welder to join our furniture design and fabrication shop located in East Village, San Diego. We create custom furniture and interiors for restaurants, hotels, and high end residential. This is a unique opportunity to work directly with designers and engineers especially early on in the design process. • Main Duties, • Read and interpret shop drawings and specifications, • ensure material compatibility with project requirements, • utilize tig welding techniques to create precise and aesthetically pleasing welds, • apply finishing techniques (grinding, polishing, etc), • Work with designers, engineers, and fabrication manager to understand and problem solve new projects., • Attend model review and kick off meetings with Engineers., • Create solutions that could help a project item be more successful and eliminate waste., • Full buy off on project assembly to assure there is no rework and fitting within budget., • Identify early on if the estimated allocated time is in danger of not being met., • Provide solutions to improve efficiency., • Ensure all projects are built off verified field dimensions., • Layout Projects:, • Collect all and ship check all parts and components purchased., • Create a fabrication succession list that is coordinated with other departments., • Coordinate with tool manager for consumables and tools needed., • Analyze and discuss (if needed) the process requirements for fabrication, loading, shipping, and installing project items in parts and/or whole., • Determine what equipment/tools are required for on-site installation., • Determine power requirements for special equipment, • Coordinate with support team members or anyone else that is involved in the success of your project., • Assure parts from other departments match your plans and dimensions., • Delegate and check in regularly with support team members, if provided, to ensure they are performing tasks correctly., • Daily operations may also involve:, • Cleaning the shop, • Assembling components, • Product protection at completion, • Load, pick up, and deliver materials and finished product., • Installation on site (local and non-local) REQUIREMENTS: • 3 plus years of proven professional working experience in a welding position, • commitment to safety protocols and guidelines in a workshop environment, • Valid Driver's license required BENEFITS: • Full time, • Holiday pay, • health, dental, and 401k, • $24-35 per hour based on experience HOW TO APPLY - Go to www.basilestudio.com/careers and, fill out the application form on the bottom of the page.

Job DescriptionStructural Specialty WelderLocation: San Diego, CA (Shipyard & Shop Operations) Position Type: Full-Time / Journeyman Industry: Marine Staffing & Ship Repair Position OverviewWe are seeking a highly skilled Journeyman Structural Specialty Welder to support mechanical repairs, structural modifications, and modernization projects across marine vessels, including US Naval, Military Sealift Command (MSC), and commercial ships.In this role, you will be responsible for welding pipe and structural components of various metals on-board ships or within the shop environment. As a journeyman, you will also be expected to provide clear direction, mentorship, and safety oversight to assigned welding helpers and fire watches. Key Responsibilities & Work Tasks • Production Welding: Perform high-quality welding on pipe and structural components utilizing various metals. Maintain a thorough understanding of SMAW, FCAW, and GMAW theory., • Area Preparation & Safety: Inspect and prepare work areas for hot work. Ensure gas-free certifications and lock-out/tag-out (LOTO) procedures are accurate, up to date, and strictly enforced before striking an arc., • Quality & Documentation: Inspect your own welds for defects and provide Objective Quality Evidence (OQE) as required by technical specifications. Document daily conditions and unexpected deficiencies using written Condition Found Reports (CFRs), including recommended corrective actions., • Team Leadership: Provide daily task direction and safety guidance to assigned pipe welding helpers and Fire Watches., • Site Management: Maintain a clean, orderly, and safe work environment throughout the shift, complying fully with OSHA standards and shipyard safety best practices.Required Qualifications & Experience, • Experience: Minimum of four (4) years of marine pipe and structural welding experience in a shipyard or heavy industrial marine environment., • Weld Test Requirements: Must be able to successfully pass specialized Alum, CuNi, Stainless, or TIG weld tests., • Technical Certifications: Must be able to certify in P-3 joints with permanent backing rings and P-14 socket weld joints using:, • SMAW, • GTAW (TIG), • FCAW OR Silver Brazing, • Blueprint Reading: Ability to comprehend, interpret, and work from complex blueprints, drawings, technical specifications, and Navy/MSC/ABS standard items and manuals., • Marine Knowledge: Working knowledge of ship repair terminology, ship compartment naming conventions, and structural layouts., • Math Skills: Proficiency in basic math, including adding, subtracting, multiplying, and dividing whole numbers, fractions, and decimals using both US customary and metric systems., • Tools: Proficiency in operating, troubleshooting, and caring for welding equipment, portable power tools, and standard trade hand tools.Physical Demands & Work EnvironmentShipyard work is physically demanding and takes place in a dynamic, heavy-industrial environment. Candidates must be physically and medically capable of meeting the following demands:, • Environmental Conditions: Comfort working in a variety of environments, ranging from normal shop conditions to outdoor docks and interior ship compartments that may be smoky, hot, cold, or have low illumination., • Confined Spaces & Heights: Ability to access tight work areas through 18” x 36” manhole openings and work in confined spaces or at heights above 12 feet (from ladders, scaffolding, and manlifts)., • Physical Strength: Ability to lift, push, or pull up to 75 lbs occasionally, and up to 20 lbs frequently., • Mobility: Ability to stand for prolonged periods (2-3 hours), bend, squat, crawl, kneel, climb, and maintain good balance on uneven surfaces., • PPE Compliance: Full medical and physical capability to wear all required Personal Protective Equipment (PPE) under OSHA standards, including hard hats, steel-toe boots, safety glasses, respirators, safety harnesses, and flotation gear.Employment PoliciesWe are a proud Equal Opportunity Employer. All personnel are expected to comply with the Company’s Non-Discrimination and Anti-Harassment Policy, ensuring a professional, businesslike workplace free of bias, prejudice, and harassment.

Job Description Labor One is hiring Journey-Level Specialty Welders (Alum, CuNi, Stainless; TIG) for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Please send us a text if we don't answer Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: Must pass the Alum, CuNi, Stainless or TIG weld test This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 1st shift 40 hours per week/OT per HM approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description Must pass the Alum, CuNi, Stainless or TIG weld test* This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned. 4. Be accountable for completion of daily work assignments., 4. Comply with OSHA standards and BAE best safety practices., 5. Keep your work area clean and safe at all times, especially at the end of the shift., 6. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 7. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 8. Comply with the Company’s “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 9. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12’ from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 40 Hours a week / OT on approval Comments for Suppliers:Requisitions opened for Sheetmetal welder - Aluminum Company DescriptionWe are a staffing agency that hires for shipyard clients.We are a staffing agency that hires for shipyard clients.

Job Description WELDER: • The Welder operates safety equipment and uses safe work habits while performing his job function., • The Welder welds components in flat, vertical, or overhead positions., • The Welder ignites torches or starts power supplies and strikes arcs by touching electrodes to metals being welded, completing electrical circuits., • The Welder detects faulty operation of equipment or defective materials and notifies supervisors., • The Welder clamps, holds, tack-weld, heat-bend, grind or bolts component parts to obtain required configurations and positions for welding., • The Welder operates manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, and flux-cored arc, plasma arc, and shielded metal arc, resistance welding, and submerged arc welding., • The Welder monitors the fitting, burning, and welding processes to avoid overheating of parts of warping, shrinking, distortion, or expansion of materials., • The Welder examines work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications., • The Welder recognizes, set up, and operates hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment., • The Welder will lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers. SHIPFITTER: 1) Lays out and fabricates metal structural parts, such as plates, bulkheads, and frames, and braces them in position within hull of ship for riveting or welding: Lays out position of parts on metal, working from blueprints or templates and using scribe and hand tools. 2) Locates and marks reference lines, such as center, buttock, and frame lines. 3) Positions parts in hull of ship, assisted by RIGGER. 4) Aligns parts in relation to each other, using jacks, turnbuckles, clips, wedges, and mauls. 5) Marks location of holes to be drilled and installs temporary fasteners to hold part in place for welding or riveting. 6) Installs packing, gaskets, liners, and structural accessories and members, such as doors, hatches, brackets, and clips. 7) May prepare molds and templates for fabrication of nonstandard parts. 8) May tack weld clips and brackets in place prior to permanent welding. 9) May roll, bend, flange, cut, and shape plates, beams, and other heavy metal parts, using shop machinery, such as plate rolls, presses, bending brakes, and joggle machines. • Must have reliable transpiration, • Must pass a pre-employment physical and drug test, • Must have own tools -Must have 3-5 min years experience

Job Description SUMMARY DESCRIPTION: The Welder/Diver is a diving specialist who is required to maintain proficiency in surface and hyperbaric (wet and dry chamber) welding as well as the skills required by all divers. The position may require worldwide travel on an emergency call out basis. The Welder/Diver will be expected to work in the facility (8 hours), possibly on board ships at sea and possibly on remote job sites, (12 hours). This position reports to the Diving Supervisor. CLASSIFICATION: Non-Exempt (hourly) DUTIES AND RESPONSIBILITIES: • Accomplish all tasks assigned by the Diving Supervisor. If assigned a task for which they do not consider them self qualified by either training or experience, they shall immediately inform the Diving Supervisor., • Read, understand, and comply with all of Phoenix policies and with applicable government regulations as they relate to their qualifications or performance while engaging in diving operations., • Maintain proficiency in welding and NDT procedures as directed by the Diving Supervisor. Perform all welding and NDT per applicable government and commercial requirements., • Maintain all government and commercial weld qualifications in accordance with Phoenix, welding and qualification procedures, training, qualification maintenance, and related program data., • Comply with regulations or instructions concerning the use, maintenance, repair, and testing of all diving equipment provided for the operation., • Report to the Diving Supervisor any recent medical treatment or illness so that a proper determination can be made concerning their fitness to dive., • Immediately report all symptoms or suspected symptoms as early and accurately as possible., • Report to the Diving Supervisor any defect or malfunction of the diving equipment provided for the diving operation., • Follow safe diving practice at all times during the diving operation whether on deck or in the water. Bring to the attention of the Diving Supervisor any questionable items. Be alert for the safety of others., • Assist in the training of new personnel or tenders., • Remain awake and in the vicinity of the decompression chamber for at least one hour following treatment or a hyperbaric exposure outside the no decompression limits., • Know and observe the rules for flying after diving or traveling to altitudes higher than the dive site., • Ensure their diving equipment has been correctly maintained, prepared, and tested before each dive. This requirement should never be delegated to others., • Maintain a diver's logbook, which details all dives, medical examinations, courses taken, and personal equipment maintenance., • Ensure their medical certificates are up to date and recorded in their logbook., • Present their logbook to the Diving Supervisor on every job., • Maintain current certification in first aid and CPR., • Complete administrative office duties as assigned. JOB REQUIREMENTS: • Graduate of a professional diving school., • Minimum five years actual underwater-welding experience that can be substantiated by a letter of qualification from a diving company recognized by the industry as having acceptable wet-welding capability., • Must be a certified welder whose qualifications are current in accordance with the American Welding Society (AWS) specification D3.6, class A (dry weld) and class B (wet weld)., • Significant physical effort required. Significant exposure to physical risk., • Ability to pass annual diving physical., • Ability to obtain a U.S. Government security clearance., • Able and willing, to travel worldwide, on short notice for indefinite periods of time. Ability to pass a pre-employment drug/alcohol screen and physical, as required. Phoenix International Holdings, Inc, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status

Job DescriptionJob Title: Welder Fitter Job Description This role involves performing TIG and MIG welding on a variety of assemblies, supporting a journeyman welder with fit-up and fabrication, and working from blueprints to produce high-quality welded components. You will work with exotic materials and various thicknesses while using fixtures, weld symbols, and proper documentation practices to ensure consistent, traceable results on-site in El Cajon, CA. Responsibilities • Perform TIG and MIG (GTAW and GMAW) welding on a wide range of assemblies according to engineering drawings and specifications., • Assist a journeyman welder with fit-up and fabrication tasks, including positioning and aligning components prior to welding., • Read and interpret blueprints, weld symbols, and travelers to determine welding requirements, materials, and sequence of operations., • Use fixtures and appropriate setup techniques to hold parts in place and maintain alignment during welding., • Operate hand grinders and related tools to prepare joints, clean welds, and finish welded components as required., • Weld exotic materials, including alloys, Inconel, and 300/400 series stainless steel, while following proper procedures for each material type., • Weld materials of different thicknesses, including .032, .060, .090, and .188, ensuring proper penetration and weld quality for each thickness., • Apply welding techniques using back gaps and other methods as specified to achieve strong, consistent welds., • Set up welding machines, including adjusting amperage and other parameters, to match the requirements of each job., • Document work accurately, including recording the type of rod used, weld type, materials, and other relevant details for traceability., • Identify materials correctly and record them on travelers or job documentation to ensure proper tracking and quality control., • Fabricate parts under supervision, following instructions and feedback to improve technique and efficiency., • Work on assigned jobs both within and adjacent to the welding field, contributing to related tasks as needed to support production.Essential Skills, • Hands-on experience performing TIG and MIG welding on assemblies., • Proficiency in GTAW and GMAW welding processes., • Ability to read and interpret blueprints and weld symbols., • Experience using fixtures to position and hold parts during welding., • Skill in welding exotic materials such as alloys, Inconel, and 300/400 series stainless steel., • Ability to weld different material thicknesses, including .032, .060, .090, and .188., • Experience setting up weld machines, including amperage and other parameters., • Competence in operating hand grinders for weld preparation and finishing., • Ability to document work accurately, including recording rods used, weld types, and materials., • Capability to identify materials and record them on travelers or job documentation., • Willingness to work on assigned jobs inside and outside the core welding field., • Ability to fabricate parts under supervision and follow detailed instructions., • Ownership of a welding hood suitable for daily use.Additional Skills & Qualifications, • Experience welding using back gaps and other specialized welding techniques., • Background working with a variety of alloys and stainless steel grades in a production environment., • Familiarity with shop travelers and structured documentation processes., • Comfort working closely with journeyman welders and following guidance to refine skills., • Strong attention to detail and commitment to producing high-quality welds and fabrications.Why Work Here? You will join a production environment that values craftsmanship, consistency, and continuous learning, giving you the opportunity to refine your welding skills alongside experienced professionals. The schedule offers a concentrated workweek with long weekends built in, supporting a better work-life balance. You will gain exposure to exotic materials, varied thicknesses, and advanced welding techniques, helping you expand your technical capabilities and build a strong, versatile welding career. Work Environment This position is based on-site in El Cajon, CA, working primarily with TIG and MIG welding processes on exotic materials such as alloys, Inconel, and 300/400 series stainless steel. You will use welding machines, fixtures, hand grinders, and standard fabrication tools in a shop environment focused on precision and quality. The role follows a 1st shift weekend schedule, Friday through Sunday, from 5:00 a.m. to 5:30 p.m., with additional compensated hours to reach a 40-hour workweek. The environment emphasizes safe, organized, and documented work practices, with clear travelers and instructions guiding each job. Job Type & Location This is a Contract to Hire position based out of El Cajon, CA. Pay and Benefits The pay range for this position is $25.00 - $30.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in El Cajon,CA. Application Deadline This position is anticipated to close on Jun 19, 2026. About Aerotek We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description Labor One is hiring Journey-Level Pipe Welders for a project in San Diego, California. Shipyard experience is required. Please contact our team for more information! Cell: (619)484-7267 ; (619)657-5507 or (858)717-1672 Please send us a text if we don't answer Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM General Information Job Description: -This position is responsible for welding pipe of various metals on a ship or in a shop to support mechanical repairs and modernization of marine vessels including US Naval, Military Sealift Command, and commercial ships. The journeyman welder is also responsible for providing direction to assigned helpers. -The qualifications and general capabilities listed below are representative of the knowledge, skill, and ability desired by the shipyard. QUALIFICATIONS AND EXPERIENCE: 1. Must be able to comprehend instructions, drawings, and general correspondence., 2. Must have a working knowledge of ship repair terminology and ship compartment naming convention., 3. Must be physically and medically capable to wear all required personal protective equipment (PPE) required for the job as prescribed under OSHA standards. PPE includes hard hat, safety glasses, steel toe shoes, goggles, respirator, safety harness, safety line, flotation gear, etc.), 4. Must be able to effectively confer job related information such as conditions found by writing condition reports that include recommended corrective action., 5. Must have a thorough knowledge of SMAW, FCAW, and GMAW theory., 6. Must be able to certify in P-3 joint with permanent backing ring, and P-14 socket weld joint:, 7. SMAW, 8. GTAW, 9. FCAW OR, 10. Silver Brazing, 11. Must be able to interpret drawings, specifications, and Navy/MSC/ABS standard items and manuals., 12. Must possess a working knowledge of equipment and work processes used in marine pipe welding., 13. Must be able to operate and care for welding equipment, portable power tools, and hand tools used to accomplish assigned work., 14. Must be able to add, subtract, multiply, and divide whole numbers, fractions, and decimals. Must understand the US customary and metric measurement systems., 15. Must have four (4) years of pipe welding experience. DUTIES AND RESPONSIBILITIES: 1. Provide direction to a pipe welding helper, if assigned, as needed to complete the assigned tasks., 2. Arrive at the designated work site at the assigned time and end the shift as directed by the schedule and pipe shop supervisor., 3. Work shifts and overtime as assigned., 4. Be accountable for completion of daily work assignments., 5. Comply with OSHA standards and the shipyards best safety practices., 6. Keep your work area clean and safe at all times, especially at the end of the shift., 7. Ensure the work site is ready for hot work before commencing hot work. Communicate with the Fire Watch and provide direction as necessary., 8. Provide quality work and Objective Quality Evidence (OQE) as required by the work specifications or assigned by the supervisor., 9. Comply with the Company's “Non-Discrimination and Anti-Harassment Policy” which expects that all relationships among persons in the workplace will be businesslike and free of bias, prejudice, and harassment., 10. Confer with the supervisor to resolve unexpected events related to your assigned task. Carry out written or oral instructions. Work Tasks Include: a. Inspect and prepare the area for hot work, including gas free certifications and tag-outs, before commencing any hot work. b. Prepares work area for production welding by inspecting joints and cleaning as required. c. Inspect welds for defects. Confer with supervision before correcting deficiencies. d. Document existing conditions using Condition Found Reports. e. Ensure gas free certifications are accurate and up to date. f. Assist with Lock-out Tag-out for work being performed. WORK ENVIRONMENT: -The working environment in the shipyard varies from a normal office conditions to working outside where precipitation, wind, extreme cold, and extreme heat and high humidity are not unusual. When working inside of vessels the environment may be smoky, hot or cold, and have low levels of illumination may be present. -There are heavy equipment and power tools operating almost at every location. Depending on the type of work available, reasonable accommodation may be made to enable individuals with disabilities to perform the job requirements. Personnel can expect to work in a variety of spaces from confined areas accessible only by manholes to high platforms accessible only by scaffolding or ladders. Work may also be accomplished using mechanical lifts as working platforms. -The noise level in the shipyard environment is usually loud, especially inside of vessels. The noise encountered in the shop is generally low to moderate. The wearing of appropriate personal protective equipment is mandatory. -There is always the potential of falling objects and personnel are occasionally exposed to moving mechanical parts during work. Appropriate PPE must always be worn. PHYSICAL DEMANDS: -The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Must be able to tour all vessels, piers, docks and work sites. -While performing the duties of this job, the employee is regularly required to: stand; walk; use hands to finger, handle or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. -The employee is occasionally required to sit. SPECIFIC PHYSICAL REQUIREMENTS: May be required to demonstrate any or all requirements. 1. Lift/push/pull 75 lbs lbs on an occasional basis (0-33% of the day)., 2. Lift/push/pull up to 20 lbs on a frequent basis (34-66% of the day)., 3. Perform prolonged standing (2-3 hours). Bend, squat crouch, crawl and kneel., 4. Climb in a safe manner (climbing, includes stairs, scaffolding, ladders and ramps)., 5. Work at a variety of levels and positions (ex. Waist, eye, above head)., 6. Good balance while working on uneven surfaces and maneuvering obstacles., 7. Sufficient handgrip and coordination to carry and operate tools and equipment., 8. Access work areas through 18” x 36” openings and work in confined spaces for prolonged periods of time (33-66% of the day)., 9. Respond to visual, verbal, and audible sounds/commands., 10. Work at heights above 12' from ladders, scaffolding, and manlifts., 11. Fully extend the arm while reaching overhead, reaching out, reaching to the side and reaching down., 12. Perceive attributes of an object/material such as size, shape, temperature and texture by means of receptors in the hands and fingers., 13. Turn head from side to side and about on the vertical axis. Turn body at the waist from side to side and about the vertical axis. 2nd Shift only 40 hours a week / OT with approval Labor One Staffing is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Job Description The production welder joins metal parts together to create structural forms, such as tanks, pressure vessels, etc. They use a variety of welding processes, including gas welding, shielded metal arc welding (SMAW), metal inert gas (MIG) welding, and tungsten inert gas (TIG) welding. We are looking for someone with the ability to operate and /or use related equipment and tools which include stick, wire feed, TIG, forklifts, hoists, slings, grinders (portable & bench), cutting torches, hand tools, drills, punches, a tape measure, etc. Be a part of a great company with comprehensive benefits package and a great work culture! Responsibilities • Responsible for welding steel, aluminum and stainless-steel materials using SMAW, GTAW and/or GMAW, FCAW processes in all positions., • Proficient in 3G, 4G plate, 6G pipe welding., • Proficiency in Flux Cored and Shielded Metal Arc Welding, • 80-120 inches of welds an hour (wire/MIG) Minimum, • 40-50 inches of welds an hour (stick) Minimum, • Weld steel, aluminum and stainless-steel components based on the required weld processes and parameters, • Adhere to the specific welding procedure specifications, • Analyze and interpret blueprints, charts and technical drawings, • Fabrication and repairing metal through appropriate welding techniques., • Ability to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations, • Ensuring products meet quality standards, • Other duties as assigned Requirements • 5+ year experience as a welder, • Ability to work on tight deadlines for project needs, utilizing efficiency and organizational skills to ensure completion on time., • Problem solving ability and skill level to adapt to changing project requirements, • Perform all work in accordance with established safety procedures, • Current Welder Certification, and, • Ability to pass ABS cert on a 6G pipe with a SMAW. Physical Demands • Must be able to lift 80 lbs. without restriction. Position involves lifting, pulling, and operating heavy equipment and objects., • Agility to bend, stoop, or squat, and climb high steps/ladders frequently and navigating uneven and moving surfaces., • Physical dexterity and strength to operate deck machinery; work on equipment that is poorly accessible or in confined workspaces., • Must be able to keep balance/equilibrium while performing duties at various heights., • Ability to work in confined spaces for prolonged periods of time., • Adequate hearing & vision ability., • Proper heat/cold tolerance, working in all weather conditions., • Comfortable working while exposed to grease, dirt, paint, water, etc. Salary: $33.00-$38.00 DOE Benefits • Sick and vacation package, • Paid Holidays, • Company PAID health benefits (medical, dental, vision and life insurance), • 401K with Company Match, • Additional voluntary benefits like, FSA, Aflac products, additional life insurance, etc., • Year-end bonus opportunity. “Pacific Maritime Group is an equal opportunity workplace. We don’t just accept but we celebrate and support differences for the benefit of our employees. Pacific Maritime Group is proud to be an affirmative action employer.”

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Tank Builder / Welder (Nationwide) Day to Day Duties: • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members., • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR f2or25brkE

Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will pass on instructions to members of the work group.\n, • You will check and report work progress of the group.\n, • You will perform work site inspections.\n, • You will receive job or work assignments from welding supervisor.\n, • You will check and report work progress of the group including written documentation and shift assist requests.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: https://wageandsalary.dcpas.osd.mil/BWN/AFWageSchedules/ SALARY: Puget Sound Naval Shipyard: WA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/MSA143143SeattleEverett_Tacoma,Washington.pdf CA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/AMA017017SanDiego,California.pdf Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/044/044R-25Nov2025.pdf Portsmouth Naval Shipyard: ME: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/087/087R-02Jan2025.pdf CA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/017/017R-02Jan2025.pdf Norfolk Naval Shipyard: VA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/140/140R-09Jul2024.pdf PA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/115/115R-02Jan2025.pdf Trident Refit Facility, Bangor, WA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/MSA143143SeattleEverett_Tacoma,Washington.pdf This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Temporary actions taken under this announcement may be made permanent without further competition. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries. We're proud to play a part in protecting the world's democracies. And we're committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the world's aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023. There are no limits to where you can take your career. Job Summary Following specific and general instructions, specializes in TIG welding on all types of metal including titanium, nickel alloy, stainless steel and aluminum. May also clean, tack and weld production hardware using both auto and manual TIG welding techniques on a variety of metals. Acts as mentor for junior Welders. May work with engineering to resolve problems and develop new processes and/or procedures. Job Responsibilities • Performs TIG welding on titanium and aluminum jet engine components., • Performs TIG welding on all types of metals to include steel, aluminum, stainless steel and titanium., • Cleans, grinds, and performs inspection as required to insure conformance to specifications., • Helps in the design stage as required on projects., • Mentors/provides guidance assistance and training to junior Welders., • Checks all work to assure that quality standards are maintained and has adhered to all specifications and procedures involving company and customer practices., • Maintains a clean work environment (including assigned storage and cleaning duties) in full compliance with company standards, customer and government regulations., • Assists in the development and maintenance of a business culture, which supports the Company's overall business objectives and goals, by providing leadership in issues that involve "cost, quality, process, schedule and people"., • Ensures the company's commitment to maintain a safe workplace and to protect the environment through the establishment and support of Company policy and adherence to various government regulations., • Fully complies with the "GKN Aerospace, Inc. Policy Statement on Contracting with the United States Government" in all areas of responsibility involving direct and indirect contracting with the United States Government. Ensure subordinate staff is aware of the policy and their individual responsibility and accountability for complying with it., • Performs daily preventative maintenance of equipment in adherence with a predefined schedule., • Performs other duties, tasks and responsibilities as assigned. Job Qualifications Required Qualifications: • High School diploma or GED, • 5+ year welding experience in TIG welding, or successful completion of additional welding certification/education for TIG welding., • Must be able to achieve AWS certification (AWS D17.1) on all materials to be welded within 6 months of start., • 3+ years of TIG welding experience working with basic math and reading blueprints and meet inspection requirements in accordance with customer specifications., • This job role requires proficiency in English, both verbal and written, that is sufficient to understand and effectively follow written safety procedures, company policies, work instructions, operations manuals, and more in a manufacturing environment., • Reliable and satisfactory attendance is an essential job function of this role and is critical in meeting operations and business needs"., • Must be a US Citizen or Green Card Holder due to program security clearance requirements and/or SSA requirements. Preferred Qualifications: • GKN Experience, • Knowledge and experience in trouble shooting of safety, quality and technical issues with co-workers, quality and engineering functions., • Must be willing to work in a repetitive production environment with concern for meeting cost, quality and schedule requirements., • The ability to work as a team player as well as independently is required., • Mentors/provides guidance assistance and training to junior Welders. Mental and Physical Demands: • Ability to read, write and comprehend English instructions, • Basic Math skills, • Manual dexterity, • Ability to stand for long periods of time, • Lift up to 50 pounds, • Withstand loud noise of a machine shop environment Compensation Range The compensation range for this position is between $28.00 - $32.00 per hour. We'll offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles we've created a culture where everyone feels welcome to contribute. It's a culture that won us 'The Best Workplace Culture Award'. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. We're also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology.

SUPERSTAR FABRICATOR / WELDER WANTED We want to talk to you if: • You are detail-oriented, reliable, loyal, and technologically savvy., • You have exceptional hand-eye coordination., • You want a career, not just a job., • Your organizational skills allow you to submit daily project updates and daily logs., • You want to become a top-of-the-industry fabricator (We promote from within). Please DON'T answer this ad if: • You cannot commit to a minimum 2-year engagement., • You have trouble showing up for work on time., • You can't work well with others., • You're in the habit of calling in sick on Monday morning. Vortex Engineering is a long-standing premier metal fabricator that helps modernize U.S. Navy submarines and ships. We also manufacture solutions for the water filtration industry. We are looking for hardworking, detailed, and personable people for a Metal Fabricator position. We are an extremely stable company with steady work. We offer higher than industry average pay, medical benefits, 401(K), and vacation. Qualifications • Previous welding and fabricating experience preferred., • Must be able to pass a U.S Government background check., • Ability to work independently and on a team to complete daily activities according to work schedules., • A valid Driver's License and clean driving record (Commercial Driver's License a plus)., • Ability to lift up to 70 lb, • Work hard in demanding environments, • Must have reliable transportation, • Must be able to pass pre-employment screenings. Job Type: Full-time Salary: $18.00 - $26.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Employee assistance program, • Employee discount, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance Experience level: • 3 years Shift: • 8-hour shift Weekly day range: • Monday to Friday Ability to commute/relocate: • San Diego, CA: Reliably commute or plan to relocate before starting work (Required) Experience: • Welding: 3 years (Required), • Metal Fabrication: 3 years (Required) Work Location: In person

Summary You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. This position is located in the Structural Shop (Shop 26). Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will perform reviews of documents associated with completed work and trade processes.\n, • You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.\n, • You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.\n, • You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.\n, • You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.\n, • You will serve as an Expert Welder leading a group to ensure work assignments are completed.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This is a bargaining unit position.\n, • You will be required to successfully complete a pre-appointment physical examination.\n, • This position requires the ability to lift and carry items weighing 50 pounds.\n, • Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n, • This position requires rotating shift work.\n, • Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.\n, • Must maintain visual inspection qualifications per VT-271.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: https://wageandsalary.dcpas.osd.mil/BWN/AFWageSchedules/ SALARY: Puget Sound Naval Shipyard: WA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/MSA143143SeattleEverett_Tacoma,Washington.pdf CA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/AMA017017SanDiego,California.pdf Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/044/044R-25Nov2025.pdf Portsmouth Naval Shipyard: ME: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/087/087R-02Jan2025.pdf CA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/017/017R-02Jan2025.pdf Norfolk Naval Shipyard: VA:https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/140/140R-09Jul2024.pdf PA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/115/115R-02Jan2025.pdf This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. A relocation incentive may be authorized. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

EXPERIENCED SUPERSTAR FABRICATOR WANTED \n We want to talk to you if: \n · You are detail-oriented, reliable, loyal, and technologically savvy. \n · You have exceptional hand-eye coordination. \n · You want a career, not just a job. \n · Your organizational skills allow you to submit daily project updates and daily logs. \n · You have a proven track record of fabricating work and want to continue at a high level as a top-of-the-industry fabricator. \n · You are ready to make an impact from day 1. \n • You are ready to be challenged. \n\n Please DON’T answer this ad if: \n · You cannot commit to a minimum 2-year engagement. \n · You have trouble showing up for work on time. \n · You can’t work well with others. \n · You’re in the habit of calling in sick on Monday morning. \n Vortex Engineering is a long-standing premier metal fabricator that helps modernize U.S. Navy submarines and ships. We also manufacture solutions for the water filtration industry. We are looking for hardworking, detailed, and personable people for a Metal Fabricator position. We are stable company with steady work. We offer higher than industry average pay, medical benefits, 401(K), and vacation. \n Qualifications \n\n • Industry experience in range of metal fabrication - thin wall stainless, stainless tube-purged, thin-wall to thick aluminum, stick, dual shield, etc.\n, • Must be able to pass a U.S Government background check.\n, • Ability to work independently and on a team to complete daily activities according to work schedules.\n, • A valid Driver's License and clean driving record (Commercial Driver’s License a plus).\n, • Ability to lift up to 70 lb\n, • Work hard in demanding environments\n, • Must have reliable transportation\n, • Must be able to pass pre-employment screenings.\n\n Job Type: Full-time \n Benefits: \n\n • 401(k)\n, • 401(k) matching\n, • Dental Insurance\n, • Employee assistance program\n, • Employee discount\n, • Health insurance\n, • Life insurance\n, • Paid time off\n, • Referral program\n, • Vision insurance\n\n Experience level: \n • 5-7 years\n Shift: \n • 8-hour shift\n Weekly day range: \n • Monday to Friday\n NOTE: The above statements are intended to describe the general nature and level of work being performed by incumbents. They are not intended to be an exhaustive list of all responsibilities, duties and skills required by all incumbents. Incumbents may perform other duties as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Management retains the right to add to or change the duties of the position at any time. \n In compliance with pay transparency requirements, the salary range for this role is provided above. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. Vortex also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, and schedule type.

SUPERSTAR FABRICATOR / WELDER WANTED We want to talk to you if: • You are detail-oriented, reliable, loyal, and technologically savvy., • You have exceptional hand-eye coordination., • You want a career, not just a job., • Your organizational skills allow you to submit daily project updates and daily logs., • You want to become a top-of-the-industry fabricator (We promote from within). Please DON'T answer this ad if: • You cannot commit to a minimum 2-year engagement., • You have trouble showing up for work on time., • You can't work well with others., • You're in the habit of calling in sick on Monday morning. Vortex Engineering is a long-standing premier metal fabricator that helps modernize U.S. Navy submarines and ships. We also manufacture solutions for the water filtration industry. We are looking for hardworking, detailed, and personable people for a Metal Fabricator position. We are an extremely stable company with steady work. We offer higher than industry average pay, medical benefits, 401(K), and vacation. Qualifications • Previous welding and fabricating experience preferred., • Must be able to pass a U.S Government background check., • Ability to work independently and on a team to complete daily activities according to work schedules., • A valid Driver's License and clean driving record (Commercial Driver's License a plus)., • Ability to lift up to 70 lb, • Work hard in demanding environments, • Must have reliable transportation, • Must be able to pass pre-employment screenings. Job Type: Full-time Salary: $18.00 - $26.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Employee assistance program, • Employee discount, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance Experience level: • 3 years Shift: • 8-hour shift Weekly day range: • Monday to Friday Ability to commute/relocate: • San Diego, CA: Reliably commute or plan to relocate before starting work (Required) Experience: • Welding: 3 years (Required), • Metal Fabrication: 3 years (Required) Work Location: In person

Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will pass on instructions to members of the work group.\n, • You will check and report work progress of the group.\n, • You will perform work site inspections.\n, • You will receive job or work assignments from welding supervisor.\n, • You will check and report work progress of the group including written documentation and shift assist requests.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: https://wageandsalary.dcpas.osd.mil/BWN/AFWageSchedules/ SALARY: Puget Sound Naval Shipyard: WA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/MSA143143SeattleEverett_Tacoma,Washington.pdf CA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/AMA017017SanDiego,California.pdf Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/044/044R-25Nov2025.pdf Portsmouth Naval Shipyard: ME: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/087/087R-02Jan2025.pdf CA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/017/017R-02Jan2025.pdf Norfolk Naval Shipyard: VA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/140/140R-09Jul2024.pdf PA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/115/115R-02Jan2025.pdf Trident Refit Facility, Bangor, WA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/MSA143143SeattleEverett_Tacoma,Washington.pdf This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Temporary actions taken under this announcement may be made permanent without further competition. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

About the Organization Founded in 1994 as a small, diversified professional services company, Delphinus today employs more than 650 professional and technical personnel supporting a customer base that spans the Defense and Federal markets. Headquartered in Newtown Square, PA, we have primary offices in Norfolk, VA; San Diego, CA; and Bremerton, WA. Company Benefits*: • Comprehensive health program for employee and dependents, • Company paid Dental and Vision, • 401(k) with company match, • Short-term and Long-term disability - Company paid, • Life Insurance and AD&D - Company paid, • Voluntary Spouse and Child Life Insurance, • Paid time off with company holiday, • Tuition Reimbursement, • Employee Assistance Program (EAP) *Benefit eligibility is set forth in benefit plan documents and organization policies. Description Position Location: Chula Vista, CA Summary: Using welding/cutting equipment and various power and hand tools, the welder performs a variety of shop and shipboard welding trade functions. These functions include the repair and/or removal of old structural materials, the installation of new structural materials and complete fabrication of complex structural, mechanical and equipment foundations. Works under direct supervision and performs related work as required. Duties and Responsibilities include the following. Other duties may be assigned. • Applies basic welding processes to join, surface, fabricate, or repair parts of metal or other weldable materials., • Qualified in basic Shielded Metal Arc (SMAW) for various combinations of steel in all positions or Gas Metal Arc (GMAW) for aluminum (spray and pulsed transfer), • Works from blueprints, engineering sketches, and specification requirements to determine materials and construction process required to fabricate component parts to develop a complete unit as designed;, • May position pieces to be welded into jigs, holding fixtures, guides, and steps using measuring instruments and hand tools;, • Knowledge of the processes and procedures necessary for the proper removal of old equipment and foundations with minimal damage to surrounding materials., • Maintain certification in the welding procedure(s) as required by Quality Assurance Manager., • Fill out Objective Quality Evidence (OQE) forms, • Follow Quality Assurance welding procedures, • Performs all work in accordance with established safety procedures., • Participates in special projects as required.\n\n Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Math Ability: Requires basic math skills such as adding, subtracting, multiplying, division and fractions Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Computer Skills: Must possess basic computer skills to enter data into different data basis. Education/Experience: • Typically requires 1+ years related experience., • High School Diploma or GED, plus technical/vocational training or the equivalent combination., • Experience working in the marine welding/fitter trade gained through a formal apprenticeship or equivalent training is preferred., • Thorough knowledge of welding standards of SMAW, GMAW, GTAW and/or FCAW welding procedures., • Skill to make complete penetration and complete fusion welds., • Read and understand blueprints and specifications.\n\n Certificates and Licenses: Must be able to successfully pass a criminal background check and obtain and maintain a security badge for all military installations and civilian shipyards as needed. Equipment: • General Hand Tools, • Welding Machines, • Precision Measuring Instruments, • Pneumatic and Electric Hand Tools, • Knowledge, Skills and Other Abilities:, • Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals., • Must possess working knowledge of welding procedures and tools., • Knowledge of welding shrinkage, welding techniques and physical properties of metal., • Ability to qualify using welding procedures on plate and/or pipe., • Must be able to pass Workmanship Inspection training., • Must be able to read and understand material safety data sheets (MDS)., • Able to follow safety procedures.\n\n Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is required on a regular basis to stand, walk, sit, use hands, reach with hands and arms, climb, balance, stoop, kneel, crouch, crawl, talk and/or hear. Frequently the employee is required to carry objects that might weigh up to 50 pounds. The employee must be able to pass the vision test. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee will be working in a shipboard environment. The employee is occasionally exposed to work near moving mechanical parts or working in a confined space. The employee is regularly exposed to fumes or airborne particles. The noise level in the work environment is usually moderate. Wage Range: $21.83 - $38.00 In determining compensation, various factors will be considered, including but not limited to, educational background; relevant experience, knowledge, skills, and abilities, market factors; and geographic location. EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Exempt/Non-Exempt Non-Exempt Req Number WEL-26-00008 This position is currently accepting applications.

Overview General: The M.C. Dean, Inc. Maritime Division works at shipyards around the world from our regional offices in San Diego, CA and Chesapeake, VA. Become a key member of our Alteration Installation Teams, supporting C4ISR system installations on ships and submarines. Join the top team on the waterfront, working for unrivaled compensation and benefits. Education and Experience: \n • High School Diploma or GED\n, • A minimum of three to four years of applicable welding experience\n, • ASNT NDT Level III Certification preferred.\n, • One (1) other relevant technical certification or qualification such as American Welding Society (AWS) Certified Welding Supervisor, AWS Certified Weld Inspector, or other preferred.\n\n Skills and Proficiencies: \n • Read and interpret specifications\n, • Read and understand shipboard installation drawings, blueprints, and job orders\n, • Use a variety of ARC and gas welding equipment to fabricate or repair products such as foundations, cable collars, cable/pipe/vent hangers, cable tube penetrations, studs, etc.\n, • Weld in all positions and for all types of metals and alloys in various shapes to include pipes, structural forms, plates, sheet metal, bar stock, machinery and equipment\n, • Weld parts together using gas welding, or brazing and any combination of arc welding processes\n, • Perform thermal cutting and grinding\n, • Repair broken or cracked parts, fill holes, and increase size of metal parts\n, • Supervisory and leadership skills\n\n Safety and Physical Requirements: \n • Occupation Safety Haz-Mat Certification\n, • Shipyard Competent Person Certification\n, • Aloft/Climbing / Climbing Shipyard Stairs and Ladders Certification\n, • Working in Confined Spaces Certification\n, • Training and the Ability to Safely Lift and Move Objects of 100 LBS \n\n Security and Work Locations: \n • Work is primarily in San Diego, CA and Norfolk, VA but you may travel for extended periods to other shipyards in the USA and to other Navy ports outside the USA\n, • You will work at government facilities.You must be a US Citizenship eligible for clearance.\n, • You must pass a background investigation\n, • You must have a valid driver's license\n, • This position may require ongoing or intermittent use of a company vehicle. Selected candidates must possess an acceptable driving record in accordance to our policy.\n\n Other Responsibilities: \n • Work overtime upon management request\n, • Maintain and safeguard company equipment and tools\n, • Maintain and safeguard welding inventory\n, • Organize and schedule welding jobs to an on-time completion\n\n Pay range: $28.80 - $43.20 We offer an excellent benefits package including \n • A competitive salary\n, • Medical, dental, vision, life, and disability insurance\n, • Paid-time off\n, • Tuition reimbursement\n, • 401k Retirement Plan\n, • Military Reserve pay offset\n, • Paid maternity leave\n\n Physical Requirements: \n • Lifts at least 100 pounds at one time and 60 pounds for an extended period of time.\n, • Relocates a 12 foot stepladder without assistance.\n, • Works at various heights up to 60 feet and can climb and maintain balance on scaffolds, aerial lifts, catwalks and all types of ladders.\n, • Walks, climbs, lifts, squats, crawls, kneels, pushes, pulls and reaches overhead on a routine and repetitive basis.\n, • Possess good vision (may be corrected vision), the ability to see in color, and the ability to hear and communicate in English.\n, • May use a standard ladder without exceeding the weight limit while carrying tools.\n, • Tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.\n, • Apply general rules to specific problems to produce answers that make sense.\n, • Combine pieces of information to form general rules or conclusions (including finding a relationship among seemingly unrelated events).\n, • See details at close range (within a few feet of the observer).\n, • Listen to and understand information and ideas presented through spoken words and sentences.\n\n Possible travel locations include the below but not limited to: \n • San Diego, CA\n, • Vallejo, CA\n, • Everett, WA\n, • Seattle, WA\n, • Portland, OR\n, • Groton, CT\n, • Mayport, FL\n, • Panama City, FL\n, • Charleston, SC\n, • Pearl Harbor, HI\n, • Portland, OR\n, • Earl, NJ\n, • Guam\n

Job Posting End Date: Until Filled Shift: ALL Security Clearance: No Clearance Job Summary Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies. Performs other related tasks as assigned, some of which may become essential to the position. Qualifications Standards Previous experience or training is required. Must be able to qualify in two gas shielded FCAW welding processes 71T-1 and 811N3 in the three positions. Knowledge of welding characteristics of metal. Must be able to work at heights, confined spaces, and any assigned shift. Must comprehend written and verbal instructions (in English). Must be able to hear warning signals, read and comprehend safety instructions, regulations and warnings. Essential Job Tasks 1. Welds parts in position for fabrication of vessels, tanks or other structural assemblies., 2. Uses carbon electrodes to cut, shape and groove metal., 3. May prepare workplace for welding by cleaning and/or preheating., 4. Examines weld sizes of weld beads., 5. Cleans weld area; sweeps and removes scrap., 6. Other job duties as may be assigned relevant to the trade. Materials, Tools, Equipment, Work Aids Welding machinery, hand tools, high reach equipment and semi auto equipment. Personal protective equipment required. Physical/Mental Involvement Frequent to continuous lifting of welding equipment. Standing, balancing, walking, climbing ladders or equipment, reaching above shoulder or out in front, manual dexterity, pushing, pulling, kneeling, bending, seeing, hearing and occasionally lowering self into confined spaces, crawling through small openings and working in reclined positions, as needed. Works in all areas of the shipyard and on board ships. Hearing warning signals and reading and comprehending safety instructions. Must be able to maintain general safety awareness and avoid hazards commonly present in employee's work area. Marginal Job Tasks General housekeeping in work areas. May be required to attend safety, quality and/or process improvement meetings. Environmental Factors Exposure to fumes, odors, dust, gases, various climates and temperatures, and low ventilation conditions, all of which can cause discomfort and/or respiratory difficulties. Exposure to constantly moving machines and mechanical parts and high levels of constant noise. PAY SCALE $33.76 - $37.11 This pay range is a reasonable estimate of the hourly range for this role. It takes into account the wide range of factors considered in making compensation decisions; including but not limited to skill sets, experience, training, and education. General Dynamics NASSCO also provides a variety of benefits including medical & dental insurance coverage, 401(k) retirement savings plan, flexible spending accounts/HSAs, life and disability insurance, company paid holidays and paid time off (PTO), wellness coaching, and an onsite health services. General Dynamics NASSCO is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law. To learn more about applicant rights under federal law, click here: Know Your Rights: Workplace Discrimination is Illegal If you have a disability that impacts your ability to complete the job application process and would like to request an accommodation, please contact our Human Resources Department. Call (619) 544-8511 or email [email protected]. This contact information is for accommodation requests only, not to inquire about the status of applications. NASSCO is an Equal Opportunity / Individuals with Disabilities / Protected Veterans Employer

SUPERSTAR FABRICATOR / WELDER WANTED We want to talk to you if: • You are detail-oriented, reliable, loyal, and technologically savvy., • You have exceptional hand-eye coordination., • You want a career, not just a job., • Your organizational skills allow you to submit daily project updates and daily logs., • You want to become a top-of-the-industry fabricator (We promote from within). Please DON'T answer this ad if: • You cannot commit to a minimum 2-year engagement., • You have trouble showing up for work on time., • You can't work well with others., • You're in the habit of calling in sick on Monday morning. Vortex Engineering is a long-standing premier metal fabricator that helps modernize U.S. Navy submarines and ships. We also manufacture solutions for the water filtration industry. We are looking for hardworking, detailed, and personable people for a Metal Fabricator position. We are an extremely stable company with steady work. We offer higher than industry average pay, medical benefits, 401(K), and vacation. Qualifications • Previous welding and fabricating experience preferred., • Must be able to pass a U.S Government background check., • Ability to work independently and on a team to complete daily activities according to work schedules., • A valid Driver's License and clean driving record (Commercial Driver's License a plus)., • Ability to lift up to 70 lb, • Work hard in demanding environments, • Must have reliable transportation, • Must be able to pass pre-employment screenings. Job Type: Full-time Salary: $18.00 - $26.00 per hour Benefits: • 401(k), • 401(k) matching, • Dental Insurance, • Employee assistance program, • Employee discount, • Health insurance, • Life insurance, • Paid time off, • Referral program, • Vision insurance Experience level: • 3 years Shift: • 8-hour shift Weekly day range: • Monday to Friday Ability to commute/relocate: • San Diego, CA: Reliably commute or plan to relocate before starting work (Required) Experience: • Welding: 3 years (Required), • Metal Fabrication: 3 years (Required) Work Location: In person

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Essential Duties & Responsibilities: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments. Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process. Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Experienced in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions. Possess basic and some advanced specialized welder's tools.\n\n Experience and Skills Requirements: \n • Must possess a high school, trade or vocational school degree.\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment.\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred.\n, • Must have or have the ability to obtain a SECRET clearance.\n, • Must have the ability to obtain base access and security credentials.\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.\n, • Travel may be required within and outside of the continental United States.\n, • Due to export control regulations, this role is open to U.S. citizens only.\n\n Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at www.continentaltide.com or follow us on our LinkedIn page at www.linkedin.com/company/continental-tide-defense-systems. To be considered you must apply by going to www.continentaltide.com.

EXPERIENCED SUPERSTAR FABRICATOR WANTED \n We want to talk to you if: \n · You are detail-oriented, reliable, loyal, and technologically savvy. \n · You have exceptional hand-eye coordination. \n · You want a career, not just a job. \n · Your organizational skills allow you to submit daily project updates and daily logs. \n · You have a proven track record of fabricating work and want to continue at a high level as a top-of-the-industry fabricator. \n · You are ready to make an impact from day 1. \n • You are ready to be challenged. \n\n Please DON’T answer this ad if: \n · You cannot commit to a minimum 2-year engagement. \n · You have trouble showing up for work on time. \n · You can’t work well with others. \n · You’re in the habit of calling in sick on Monday morning. \n Vortex Engineering is a long-standing premier metal fabricator that helps modernize U.S. Navy submarines and ships. We also manufacture solutions for the water filtration industry. We are looking for hardworking, detailed, and personable people for a Metal Fabricator position. We are stable company with steady work. We offer higher than industry average pay, medical benefits, 401(K), and vacation. \n Qualifications \n\n • Industry experience in range of metal fabrication - thin wall stainless, stainless tube-purged, thin-wall to thick aluminum, stick, dual shield, etc.\n, • Must be able to pass a U.S Government background check.\n, • Ability to work independently and on a team to complete daily activities according to work schedules.\n, • A valid Driver's License and clean driving record (Commercial Driver’s License a plus).\n, • Ability to lift up to 70 lb\n, • Work hard in demanding environments\n, • Must have reliable transportation\n, • Must be able to pass pre-employment screenings.\n\n Job Type: Full-time \n Benefits: \n\n • 401(k)\n, • 401(k) matching\n, • Dental Insurance\n, • Employee assistance program\n, • Employee discount\n, • Health insurance\n, • Life insurance\n, • Paid time off\n, • Referral program\n, • Vision insurance\n\n Experience level: \n • 5-7 years\n Shift: \n • 8-hour shift\n Weekly day range: \n • Monday to Friday\n NOTE: The above statements are intended to describe the general nature and level of work being performed by incumbents. They are not intended to be an exhaustive list of all responsibilities, duties and skills required by all incumbents. Incumbents may perform other duties as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Management retains the right to add to or change the duties of the position at any time. \n In compliance with pay transparency requirements, the salary range for this role is provided above. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. Vortex also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, and schedule type.

Summary You will serve as a WELDER in the DEPARTMENT OF THE NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will be identifying and associating metals, alloys and filler metal by color code and standard markings.\n, • You will be producing welds to the acceptance standards of NDT, strength, tightness or pressure tests.\n, • You will be using test methods for determining metals or alloys.\n, • You will be inspecting completed welding projects.\n, • You will be using various welding machines and welding processes to weld piping parts or structures.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO THE WORK OF THE POSITION WITHOUT MORE THAN NORMAL SUPERVISION. Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: https://wageandsalary.dcpas.osd.mil/BWN/AFWageSchedules/ SALARY: Puget Sound Naval Shipyard: WA:https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/MSA143143SeattleEverett_Tacoma,Washington.pdf CA:https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/AMA017017SanDiego,California.pdf Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/044/044R-25Nov2025.pdf Portsmouth Naval Shipyard: ME: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/087/087R-02Jan2025.pdf CA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/017/017R-02Jan2025.pdf Norfolk Naval Shipyard: VA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/140/140R-09Jul2024.pdf PA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/115/115R-02Jan2025.pdf Trident Refit Facility, Bangor, WA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/MSA143143SeattleEverett_Tacoma,Washington.pdf This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be made permanent without further competition. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Essential Duties & Responsibilities: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments. Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process. Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Experienced in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions. Possess basic and some advanced specialized welder's tools.\n\n Experience and Skills Requirements: \n • Must possess a high school, trade or vocational school degree.\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment.\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred.\n, • Must have or have the ability to obtain a SECRET clearance.\n, • Must have the ability to obtain base access and security credentials.\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.\n, • Travel may be required within and outside of the continental United States.\n, • Due to export control regulations, this role is open to U.S. citizens only.\n\n Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at www.continentaltide.com or follow us on our LinkedIn page at www.linkedin.com/company/continental-tide-defense-systems. To be considered you must apply by going to www.continentaltide.com.

Summary You will serve as a WELDER LEADER in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, Trident Refit Facility Bangor and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility. Applicants will only be considered for positions within their own UIC. For example: if you are within UIC 4523A, you will only be considered for positions within 4523A. Learn more about this agency Duties Help \n • You will pass on instructions to members of the work group.\n, • You will check and report work progress of the group.\n, • You will perform work site inspections.\n, • You will receive job or work assignments from welding supervisor.\n, • You will check and report work progress of the group including written documentation and shift assist requests.\n\n Requirements Help Conditions of employment \n • Must be a US Citizen.\n, • Must be determined suitable for federal employment.\n, • Must participate in the direct deposit pay program.\n, • New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov\n, • Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.\n, • Males born after 12-31-59 must be registered for Selective Service.\n, • This may be a bargaining unit position.\n, • You may be required to successfully complete a pre-appointment physical examination.\n, • You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.\n, • This is a Drug Testing position. Successful completion of a pre-employment drug test (including marijuana) is required.\n, • A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You may be subject to random drug testing.\n, • You may be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.\n, • Work may be performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You may be required to participate in medical surveillance programs.\n, • This position may require exposure to high noise levels.\n, • This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.\n, • This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.\n\n Qualifications Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time. Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below. This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: https://www.opm.gov/policy-data-oversight/classification-qualifications/federal-wage-system-qualifications/#url=List-of-Approved-Job-Elements Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment. Education This job does not have an education qualification requirement. Additional information Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: https://wageandsalary.dcpas.osd.mil/BWN/AFWageSchedules/ SALARY: Puget Sound Naval Shipyard: WA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/MSA143143SeattleEverett_Tacoma,Washington.pdf CA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/AMA017017SanDiego,California.pdf Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/044/044R-25Nov2025.pdf Portsmouth Naval Shipyard: ME: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/087/087R-02Jan2025.pdf CA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/017/017R-02Jan2025.pdf Norfolk Naval Shipyard: VA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/140/140R-09Jul2024.pdf PA: https://wageandsalary.dcpas.osd.mil/Content/AF%20Schedules/survey-sch/115/115R-02Jan2025.pdf Trident Refit Facility, Bangor, WA: https://wageandsalary.dcpas.osd.mil/Content/FWS%20Special%20Schedules/MSA143143SeattleEverett_Tacoma,Washington.pdf This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments. Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations. Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees. Temporary actions taken under this announcement may be made permanent without further competition. A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized. Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement. Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement. Referral lists will be issued on an as-needed basis as vacancies occur. All eligibility and qualifications must be met by the referral cut-off date. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation. Expand Hide additional information Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution. Benefits Help A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.

Job Description Company Overview: Continental Tide Defense Systems, Inc. (Continental Tide) is an industry leader, providing engineering and industrial services to the U.S. Navy, U.S. Coast Guard, Military Sealift Command, and other DoD organizations. At Continental Tide, we understand that a great company culture is one where employees know their voice is heard, no matter what their title is, and letting them grow in their role as the company does. We want to provide our employees with the opportunity to learn, be challenged and be in a position where they can succeed, develop new skills, and do things they wouldn't have the opportunity to do elsewhere. Our fast-paced and challenging environment, employees here at Continental Tide can catapult themselves to the top and we're looking for 'the best at what they do' to join our team and help us grow. *Please note due to the anticipated volume of responses, we will contact only those candidates who most closely match our requirements. Only local candidates will be considered. Veteran and retired candidates welcome! Job Overview: Continental Tide is seeking an experienced and skilled Welder. The successful candidate will join our Fleet Services Group performing various ship repair, modernization and Alteration Installation Team (AIT) projects. Essential Duties & Responsibilities: \n • Knowledgeable in joining, fabricating, and repairing metal and other weldable material by applying appropriate welding techniques.\n, • Perform various welding processes to repair, modify and install various pipes, structures, foundations and fittings associated with shipboard hydraulic, pneumatic and water systems.\n, • Fabricate and install fixtures and jigs required for welding process alignments. Interpret blueprints, specifications, diagrams or schematics to determine appropriate welding process. Must be able to select required welding filler materials, joint design, heat ranges and most effective or required welding process/procedure to ensure quality welding operations IAW TWD.\n, • Inspect completed welds to determine structural soundness and adherence to NAVSEA, ABS & AWS standards. Installs or repairs equipment, such as pipes, valves, floors and tank linings.\n, • Experienced in SMAW, GMAW & GTAW, Ship Fitting and OXY ACC & Propane GAS Cutting torch. Able to weld multiple types, thicknesses & sizes of pipe, plate & bar material in horizontal, overhead and/or vertical positions. Possess basic and some advanced specialized welder's tools.\n\n Experience and Skills Requirements: \n • Must possess a high school, trade or vocational school degree.\n, • 5-10 years of direct experience in ship repair and installation of HM&E systems and equipment.\n, • Ability to read and interpret ship installation drawings, installation specifications and NAVSEA Standard Items is preferred.\n, • Must have or have the ability to obtain a SECRET clearance.\n, • Must have the ability to obtain base access and security credentials.\n, • Ability to lift, carry and transport heavy equipment and boxes. The exact weight requirements will be determined by the specific job, but no less than 30 lbs.\n, • Ability to work on and climb ladders, work in extreme temperature environments, aboard ships, in shipyards, under industrial conditions and in confined spaces.\n, • Travel may be required within and outside of the continental United States.\n, • Due to export control regulations, this role is open to U.S. citizens only.\n\n Job Benefits Benefits: Continental Tide offers an empowering professional environment in a culture that stresses teamwork, shared responsibility for company and client success, and personal growth. We offer competitive wages in salaried and hourly positions, educational opportunities, competitive employee benefit options, and 401K plan with company match. Continental Tides Defense Systems, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. See all of our latest opportunities at www.continentaltide.com or follow us on our LinkedIn page at www.linkedin.com/company/continental-tide-defense-systems. To be considered you must apply by going to www.continentaltide.com.

Fantastic challenges. Amazing opportunities. GKN Aerospace is reimagining air travel: going further, faster and greener! Fuelled by great people whose expertise and creativity sets the standards in our industry, we're inspired by the opportunities to innovate and break boundaries. We're proud to play a part in protecting the world's democracies. And we're committed to putting sustainability at the centre of everything we do, opening up and protecting our planet. With over 16,000 employees across 33 manufacturing sites in 12 countries we serve over 90% of the world's aircraft and engine manufacturers and achieved sales of £3.35 bn.in 2023. There are no limits to where you can take your career. Job Summary Following specific and general instructions, specializes in TIG welding on all types of metal including titanium, nickel alloy, stainless steel and aluminum. May also clean, tack and weld production hardware using both auto and manual TIG welding techniques on a variety of metals. Acts as mentor for junior Welders. May work with engineering to resolve problems and develop new processes and/or procedures. Job Responsibilities • Performs TIG welding on titanium and aluminum jet engine components., • Performs TIG welding on all types of metals to include steel, aluminum, stainless steel and titanium., • Cleans, grinds, and performs inspection as required to insure conformance to specifications., • Helps in the design stage as required on projects., • Mentors/provides guidance assistance and training to junior Welders., • Checks all work to assure that quality standards are maintained and has adhered to all specifications and procedures involving company and customer practices., • Maintains a clean work environment (including assigned storage and cleaning duties) in full compliance with company standards, customer and government regulations., • Assists in the development and maintenance of a business culture, which supports the Company's overall business objectives and goals, by providing leadership in issues that involve "cost, quality, process, schedule and people"., • Ensures the company's commitment to maintain a safe workplace and to protect the environment through the establishment and support of Company policy and adherence to various government regulations., • Fully complies with the "GKN Aerospace, Inc. Policy Statement on Contracting with the United States Government" in all areas of responsibility involving direct and indirect contracting with the United States Government. Ensure subordinate staff is aware of the policy and their individual responsibility and accountability for complying with it., • Performs daily preventative maintenance of equipment in adherence with a predefined schedule., • Performs other duties, tasks and responsibilities as assigned. Job Qualifications Required Qualifications: • High School diploma or GED, • 5+ year welding experience in TIG welding, or successful completion of additional welding certification/education for TIG welding., • Must be able to achieve AWS certification (AWS D17.1) on all materials to be welded within 6 months of start., • 3+ years of TIG welding experience working with basic math and reading blueprints and meet inspection requirements in accordance with customer specifications., • This job role requires proficiency in English, both verbal and written, that is sufficient to understand and effectively follow written safety procedures, company policies, work instructions, operations manuals, and more in a manufacturing environment., • Reliable and satisfactory attendance is an essential job function of this role and is critical in meeting operations and business needs"., • Must be a US Citizen or Green Card Holder due to program security clearance requirements and/or SSA requirements. Preferred Qualifications: • GKN Experience, • Knowledge and experience in trouble shooting of safety, quality and technical issues with co-workers, quality and engineering functions., • Must be willing to work in a repetitive production environment with concern for meeting cost, quality and schedule requirements., • The ability to work as a team player as well as independently is required., • Mentors/provides guidance assistance and training to junior Welders. Mental and Physical Demands: • Ability to read, write and comprehend English instructions, • Basic Math skills, • Manual dexterity, • Ability to stand for long periods of time, • Lift up to 50 pounds, • Withstand loud noise of a machine shop environment Compensation Range The compensation range for this position is between $28.00 - $32.00 per hour. We'll offer you fantastic challenges and amazing opportunities. This is your chance to be part of an organisation that has proven itself to be at the cutting edge of our industry; and is committed to pushing the boundaries even further. And with some of the best training on offer in the industry, who knows how far you can go? A Great Place to work needs a Great Way of Working Everyone is welcome to apply to GKN. We believe that we can only achieve our ambitions through a coming together of diverse minds who enjoy collaborating in an inspirational environment. Through our commitment to diversity, inclusion and belonging and by living our five powerful principles we've created a culture where everyone feels welcome to contribute. It's a culture that won us 'The Best Workplace Culture Award'. By embracing and celebrating what makes us unique we encourage everyone to bring their full self to work. We're also committed to providing an accessible recruitment process, so if you require reasonable adjustments at any stage during our recruitment process please get in touch and let us know. We are the place where human dreams, plus human endeavour, shape the future of aerospace innovation and technology.

Job DescriptionClient has a job opening for a Planner / Scheduler II, with a Minimum of five years of experience with scheduling processes; supporting our San Diego, CA location.Job SummaryA Planner / Scheduler II is responsible for the developing and maintaining production schedules. Organizes, structures, and tracks, tasks, resources and milestones based upon contractual data.Essential Duties and ResponsibilitiesAccurately manages a Primavera P6 (Oracle) Project Schedule ensuring daily up-to-date revisionEffectively builds and maintains organized Projects to include sub-tier tasks, milestones, predecessors, and resource allocation as necessary to provide an accurate illustration of both current and future production obligations.Remains current with Oracle Project scheduling. Has knowledge of Microsoft Excel Spreadsheets applications and can interface with legacy Microsoft Project schedules.Provides detailed reports, charts, and schedules for review daily or when requested.Other duties as may be assigned.Position RequirementEducation:High School and/or advanced technical schooling preferred.Formal training in the application of Project Management Programs (e.g. Primavera P6 and MS Project)Experience and Knowledge:Minimum of (5) years of experience with scheduling processes.Trade Experience within the ship repair/shipyard industry, particularly machinery, preferred.Possess a general knowledge of trades associated within the ship repair industry, (i.e., welder, pipe fitter, outside/inside machinist, electrician, etc.)Must be reliable, self-disciplined and motivated.Possess excellent communication skills; as both a listener and when providing direction.Ameri-Force BenefitsAs part of the Ameri-Force team, a recognized ESOP company, you have a personal stake in the collective success of the organization, fostering a collaborative and rewarding work environment. Our competitive benefits package includes:Industry Leading PayMedical CoverageDental CoverageVision CoverageShort Term Disability BenefitsTerm Life BenefitsReferral BonusesReferral Bonuses are available for specific jobs onlyAbout Ameri-Force Since 1991, Ameri-Force has been a leader in skilled trades staffing, offering a people-focused approach that provides competitive advantages for our clients and rewarding career opportunities for our contract employees. Leveraging our deep expertise in maritime, manufacturing, aerospace, industrial, and energy sectors, we ensure a seamless experience by efficiently managing federal and state taxes, unemployment, and worker’s compensation. In addition, we offer a comprehensive benefits package, including medical, dental, vision, short-term disability, and life insurance, tailored to meet the needs of our workforce. Join Ameri-Force and be part of a company that values your success. Learn more at ameriforce.com Note: The specific duties, skills and qualifications may vary depending on the company’s requirements and the nature of the tasks performed at the site. Employees must be willing to make reasonable adjustments to their tasks depending on the requirements of the client. We are an equal opportunity employer. We do not discriminate based on race, color, creed, religion, national origin, ancestry, citizenship status, marital status, age, sex, sexual orientation, gender identity, disability, veteran status, or any other protected characteristic as established by law.Pay: $24 - $35/hr

Job Description Labor One is hiring Firewatch for a shipyard in San Diego, California. Please contact our team for more information! Cell: (619)657-5507 , (858)717-1672, or (619)484-7267 • Please send us a text if we don't answer* Walk-ins Accepted! Apply today! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM Job Summary • Observes for sparks and flames during welding and works as a laborer to assist trades; sweeps, hoses and performs tasks related to clean up on-board ship, in drydock, on piers and throughout the shipyard., • Performs other related tasks as assigned, some of which may become essential to the position. Qualification Standards • High school graduate or GED with prior experience preferred., • Ability to read and write (in English) and understand verbal instructions required., • Requires observation skills, ability to respond quickly, housekeeping skills, good judgement and on-going safety awareness., • Must be able to access and move around ship safely, work at heights and in confined areas with limited visibility., • Must be clean shaven for respirator fit (modest mustache is fine). Essential Job Tasks • Assists in setting up equipment, including helping the welder running leads, hoses, operation of air an electric power tools; moves metal pieces for re-fitting; removes scrap from work area., • Moves fire bottle to areas of work; observes for sparks from welding and grinding;extinguishes fire when necessary., • Maintains a clean, hazard-free work area., • Sorts, inspects and stacks lumber and metal scaffold components. Materials, Tools Equipment, Work Aids Fire retardant material, hoses, leads, cleaning equipment and supplies, lights, fire bottle. Metal, wood, scaffold sub-section, bolts, clips, hand tools, cable lines and rope lines. Physical/Mental Involvement Lifting/carrying of objects weighing up to 50 lbs.; standing, walking, climbing/balancing, pushing/pulling, kneeling, crawling, stooping, crouching, reaching, handling, fingering, eye/hand/foot coordination, seeing, hearing and speaking. Understanding written and verbal directions, recognizing and avoiding potential safety hazards, following established procedures. Marginal Job Tasks None identified. Environmental Factors Works 50% of the time inside, 50% outside, on board ship, drydock, balanced on scaffolding in shipyard. Exposed to wind, heat, constant wet and humid conditions, vibrations; works near constantly moving machinery, mechanical parts and traffic from other trades. Exposed to fumes, odors, dust, toxic or caustic chemicals. Exposed to constant loud machinery noise. Labor One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other basis protected by local, state, or federal law.

Trillium Staffing - - Responsibilities: Weld 2- to 24-inch pipes in 6G position for industrial piping projects.

Labor One is currently hiring pipe welders in San Diego, CA at a shipyard.

Welds a variety of metal surfaces or pipe using various types of welding equipment.Welds shell plating, fabricated cast or forged components according to specifications for vessels, tanks or other structural assemblies.Performs other related tasks as assigned, some of which may become essential to t

The journeyman welder is also responsible for providing direction to assigned helpers.