Trabajos welder en Atlanta, GeorgiaCrear alertas

Job Description As a Project Specialist/Welder worker with our Hoffman Mechanical, you will become part of a team of stellar employees who are highly valued and skilled. We are an employed owned and operated business dedicated to performing quality work and providing outstanding service to our customers. As a member of our team, you will plan, lay out, repair and install sheet metal products, parts, and when needed assist with installing HVAC equipment. You will get to put your technical skills to use operating tools and machines and taking measurements according to blueprints. This role will be great for anyone who wants to make the most of their abilities and grow with a family- oriented company committed to hard work. Job Responsibilities • Utilize and interpret blueprints to determine how and where to fabricate, assemble and install sheet metal products, • Measure, mark dimensions and lay out material to be installed using tools such as scribes, rulers, calculators and squares, • Fasten joints and seams in sheet metal with solder, welds, caulk, bolts and metal driver clips, ensuring work is done carefully and bonds will last, • Install assemblies, including pipes, HVAC ducts, flashings, rain gutters and furnace casings in supportive frameworks, • Ensure that efficiency is maximized while fabricating and installing HVAC systems, • Use hand and power tools to trim, buff, smooth, file and grind metal surfaces and joints of parts that have been assembled to ensure safety and a seamless appearance, • Select the appropriate type and gauge of sheet metal to be used in projects according to specifications, • Ensure safety is a priority on the job during all activities, including using tools and installing and fabricating metal Job Skills & Qualifications Required: • High school diploma or equivalent, • Ability to lift heavy materials and tools, • Must be able to read and interpret blueprints, • 4 + years of experience Physical Demand Requirements: • Standing: Frequently, • Walking: Frequently, • Sitting: Occasionally, • Stooping: Frequently, • Handling/Fingering: Frequently, • Climbing: Frequently, • Bending: Frequently, • Pushing/Pulling 12 lbs. or less: Frequently, • Lifting/Carrying 10 lbs. or less: Frequently, • Lifting/Carrying 11-50 lbs.: Frequently, • Lifting/Carrying 51-75 lbs.: Occasionally, • Reaching Outward: Frequently, • Reaching Above Shoulder: Frequently, • Squatting/Kneeling: Frequently, • Driving: Frequently We are 100% employee-owned through an Employee Stock Ownership Plan (ESOP). This is a retirement benefit for our employees that is wholly paid for by the company in addition to 401(k) options for employee contributions. There are approximately 7,000 ESOPs in the United States, governed by the IRS and the U.S. Department of Labor. Research indicates that ESOP companies tend to grow faster in sales and employment. ESOP employees tend to have 2.2 times as much in retirement savings as employees in traditional companies. This job description is intended to provide information regarding the essential functions and basic duties of this position. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills, and duties that could be assigned. Additional functions and requirements may be assigned by management as it deems appropriate. This document does not constitute a contract and is subject to change at the discretion of Hoffman Mechanical Solutions. EOE / Vets / Disabled

Auto Body Technician Classic Collision was established in 1983 in Atlanta, Georgia with one single goal: To offer quality service to its customers with integrity and honesty. Be a part of a rapidly growing company whose mission is to put safety, quality, integrity, and heart into every vehicle we repair and customer we serve. Classic Collision offers competitive pay, benefits, and career advancement opportunities. Please come and join our team! Why Choose Classic Collision? • Paid Weekly, • Continuous Training, • Supportive Team Culture, • Company match 401K, • Medical/Dental/Vision, • Paid Time Off - 6 Paid Holidays, • Rewarding Work Responsibilities • Complete disassembly of vehicle to assist Collision Estimators in assessing damage to prepare a 100% Repair Plan, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Plan work procedure: follow work order for all operations listed, • Remove upholstery, accessories, electrical and hydraulic windows, and seat operating equipment to gain access to damaged area of vehicle if needed. Store parts on carts or cover to eliminate potential damage, • Mend damaged body by hammering out or filling in dents and welding broken parts; ensure all gaps and fits are to industry standards; remove damaged panels and bolts or welds replacement parts in position and reassemble after parts are painted, • Operate a variety of hand and power tools (e.g. welder, soldering equipment, cutting torch, blocks, hammers, wrenches, sander, spray guns, etc.), • File, grind, and sand repaired surfaces before turning vehicle over to the Paint Dept., • Repair or replace defective parts, • Ensure all needed repairs identified to eliminate supplements and minimize repair time, • Inspect and test drive repaired vehicles to check for compliance with safety and quality standards, • Perform other related duties as assigned, • Comply with all Classic Collision standard operating procedures, safety, rules, and guidelines Qualifications • Must be at least 18 years of age, • I-CAR / ASE certifications preferred, • 2-3 years’ collision repair experience preferred, • Valid Driver's License Required, • Customer-focused attitude with the ability to work well in a team environment, • Ability to read and comprehend written instructions and information, • Successful completion of background check required Behaviors/Competencies: • Integrity-Respect and accountability at every level and every interaction, • Customer Service-Provide the highest level of customer service while building customer satisfaction and retention, • Innovation-Develops and displays innovative approaches and ideas to our business, • Teamwork-Contributes to building a positive team spirit and supports everyone’s efforts to succeed Physical & Environmental While performing the duties of this job, the employee is regularly required to use hands, and is required to talk and hear. The employee is frequently required to stand, sit, and walk occasionally for long periods at a time. The employee may occasionally be required to reach with hands, arms and move objects up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and ability to adjust focus. In addition, abilities for assessing the accuracy, neatness and thoroughness of the work assigned is required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential function. Classic Collision is an Equal Opportunity Employer: As an equal opportunity employer, Classic Collision does not discriminate against any employee or candidate based on age, race, gender identity, gender expression, genetic information, national origin, physical or mental disability, protected veteran status, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by all applicable federal, state, and local laws. Reasonable Accommodations: Classic Collision is an equal opportunity employer that is committed to working with and providing reasonable accommodations to individual with disabilities. If you have a disability and you believe you need a reasonable accommodation to search for a job opening or submit an online application, please e-mail recruiting@classiccollision.com or call (470)500-6808. This email and phone number are listed exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. This job description is not a complete statement of all duties and responsibilities comprising the position. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the _ notice from the Department of Labor.

Job Description The Robotic Welder Programmer for Miller or Lincoln welding systems creates, tests, and optimizes programs for robotic welding and automation systems to meet customer specifications and production goals. · Programming & Setup: Develops, tests, and implements robot programs for welding using Fanuc, Copilot or Panda Suite software. · Optimization: Adjusts welding parameters (speed, voltage, wire feed) to maximize weld quality, consistency, and cycle times. · Engineering Collaboration: Coordinates front-end reach reviews, manages robot downloads, and assists with system integration and troubleshooting. · Documentation: Creates setup sheets, procedures, and technical documentation for robotic applications. Updates computer records and paperwork in accordance with production requirements. · Quality Control: Inspect finished parts for adherence to blueprints, welding symbols, and customer specifications. · Maintenance: Perform preventative maintenance on robotic cells and maintain records of programs and changes. · Technical Support: Diagnose and resolve minor robot, fixture, or weld quality issues during production, such as sensor errors and wire feed issues. · Mig Skills: Must be experienced in Mig welding to touch up welds as needed. · Safety Adherence: Strictly follow safety protocols, including wearing proper PPE (welding helmet, safety glasses and gloves), ensuring light curtains/safety gates are functioning, and reporting near-misses. · Communication: Must have a working command of the English language and be able to communicate orally and in writing. · Ability to perform essential duties. · Degree in Mechanical/Robotics Engineering or equivalent experience. · Minimum of two years in robotics and Mig welding applications. · Experience with Fanuc, Copilot or Panda Suite Software. Company DescriptionFrom the day Matthews Machine Company opened, one purpose was uppermost in the mind of our founder, Arthur M. Matthews: personal attention to the needs of the customer. Today, every member of the Matthews organization works with that same purpose...to perform quality work at fair prices.From the day Matthews Machine Company opened, one purpose was uppermost in the mind of our founder, Arthur M. Matthews: personal attention to the needs of the customer. Today, every member of the Matthews organization works with that same purpose...to perform quality work at fair prices.

Job Description Join DBS Manufacturing in Atlanta, GA, as a Full-Time Welder Fabricator and immerse yourself in a hands-on role. Here, you’ll have the opportunity to work onsite, contributing to projects that will challenge you and build your skills. With a starting pay rate of up to $50,000 annually, this position will encourage you to push boundaries as a problem solver. As a team member you'll be able to enjoy benefits such as Medical, Dental, Vision, and Paid Time Off. Step into an environment where every day brings new challenges and the satisfaction of seeing your work come to life. Apply now and be part of something exceptional! What's your day like?As a Full-Time Welder Fabricator at DBS Manufacturing, you will be responsible for interpreting blueprints, technical drawings, and welding specifications to determine fabrication requirements. Daily responsibilities include setting up welding equipment, preparing materials, cutting and fitting components, and positioning parts for assembly. You will perform various welding processes, including MIG and TIG welding, while ensuring accuracy, quality, and adherence to company standards. Maintaining a safe and organized work area and producing high-quality fabricated products will be key expectations in this role. Attention to detail is crucial as you inspect welds for structural integrity and finish quality. You will also collaborate with team members to troubleshoot problems and suggest improvements in processes. Maintaining a clean and organized workspace while adhering to all safety protocols is essential. Embrace the opportunity to learn and grow in a hands-on environment where your contributions will directly impact project success. Are you a good fit for this Welder Fabricator job? To succeed as a Full-Time Welder Fabricator at DBS Manufacturing, several key skills are essential. Strong attention to detail is vital for ensuring precision in your welding work and the quality of finished products. You should possess excellent manual dexterity and hand-eye coordination to operate welding equipment effectively. Problem-solving abilities will enable you to identify and rectify issues swiftly during the fabrication process. A solid understanding of welding techniques and materials is necessary, alongside the capability to read and interpret blueprints accurately. Good communication skills are important for collaboration with team members and conveying ideas clearly. Lastly, a commitment to safety and the ability to adhere to guidelines will ensure a secure work environment while you tackle exciting projects. Connect with our team today! If you think this job is a fit for what you are looking for apply below. Prior to us formally offering you employment at DBS, we require a background check, pre-employment physical, and drug test.

Job Description We are seeking a Welder Fabricator to become an integral part of our team! Perform a wide range of welding including MIG/ARC welding. Familiar with cutting pipe, building jigs, and prepping materials. Works from sales orders and/or verbal instructions in locating material and processing. Activities primarily consist of welding standard size gate frames, along with other miscellaneous welding as necessary. MUST KNOW HOW TO WELD GALVANIZED STEEL. 1.) Uses verbal or written instruction from work orders and collects materials for processing 2.) Cuts pipe using pipe cutting equipment 3.) Lays out pipe sections on a jig or table and welds with MIG/ARC welding equipment and techniques applies cold galvanizing solution to protect welds 4.) Performs visual inspection on completed work ensuring quality 6.) Maintains a clean and safe work area and can operate a forklift (optional) 7.) Performs other warehouse and gate fabrication duties as required Qualifications • 2-3 yrs. welding experience with MIG, ARC welding, • Able to lift/move heavy materials (up to 75lbs), • Ability to read, write and perform basic math functions, • Proficient in blueprint reading and execution from a plan, • Ability to perform own layouts using jigs, • Ability to work around heat and chemicals, • Must be able to work overtime as needed, • Multiple years of steel experience required, and can set up machines themselves, • Some aluminum experience preferred, but must at least show proficiency in a weld test, • Understands more complex blueprints, and can interpret welding symbols, • Confident they’re able to pass D1.1 and D1.2 certification tests within the first 90 days of employment, • Measurement reading down to 1/32” and can do the relevant mathCompany DescriptionFor over a decade, Recruit XL has provided hiring and staffing services to clients in the technology and industrial sedctor. Our proven hiring strategies have placed hundreds of employees with established and trusted companies throughout North America on contract, contract-hire, and direct hire.For over a decade, Recruit XL has provided hiring and staffing services to clients in the technology and industrial sedctor. Our proven hiring strategies have placed hundreds of employees with established and trusted companies throughout North America on contract, contract-hire, and direct hire.

Job Description Job Summary The Welder, Certified position performs diversified welding and fabrication on a wide variety of complex assemblies and structures and is authorized to perform structural steel repairs to the rental fleet when required. A Certified Welder is defined as an employee who holds a valid 3G AWS D1.1 structural steel welding certification from an AWS D1.1 testing facility (attainable using MIG or Flux Core processes). This position is a safety-sensitive role that requires compliance with the company’s drug and alcohol policy and adherence to all safety regulations and procedures. Key Responsibilities • Reviews work orders/prints; plans the welding sequence, fit-up approach, and required tools/materials., • Fabricates components/assemblies by cutting, burning, fitting, and welding steel and other metals., • Performs structural steel repairs and rebuilds using AWS D1.1-compliant techniques and approved welding equipment (MIG/Flux Core, as applicable)., • Prepares base metal; sets up, aligns, assembles, and tack-welds parts to verify fit-up prior to final welding., • Builds up and restores worn or damaged surfaces to required dimensions and serviceability., • Use oxy-fuel/plasma cutting equipment to dismantle assemblies and cut material to size and shape., • Maintains a clean, organized, and safe work area; performs routine equipment care and basic preventive maintenance., • Dismantles or cuts obsolete equipment as assigned;segregates parts and scrap per branch procedures., • Performs other related duties as assigned by the Supervisor., • Acknowledges and follows the Company safety policy; complies with all safety rules and regulations. Knowledge and Skills • Able to lift up to 50 lbs., • High attention to detail, measurement accuracy, and weld quality., • Professional communication and teamwork skills., • Sound judgment; prioritizes safety in all decisions., • Organized; able to manage multiple repair priorities efficiently. Certification Requirements • Certification is met when an NTS employee passes the 3G AWS D1.1 certification test at an AWS D1.1 testing facility. Upon passing, the job title Welder, Certified will be assigned., • An NTS employee with previous certification meets the requirement by passing the applicable recertification test., • Training may be acquired by working as an assistant to a Certified Welder in the branch and subsequently passing the 3G certification test., • HUB Branches and any branch location making structural repairs to the rental fleet must develop and maintain Certified Welders. Qualifications • Minimum (3) three years of welding experience, • Must hold and maintain a valid 3G AWS D1.1 structural steel welding certification from an AWS D1.1 testing facility (MIG or Flux Core)., • Ability to obtain forklift certification as required, • Must have a valid driver’s license.

Job Description This is a job shop welding and fabrication position — NOT a production welding role. We fabricate custom, one-off and short-run sheet metal and structural components. If you are looking for repetitive, fixture-based, production welding, this is not that job. We are looking for an experienced Welder/Fabricator who can read prints, fit parts, and work through a job from start to finish with minimal supervision. What You’ll Be Doing • MIG welding (GMAW) carbon steel, aluminum, and stainless steel, • TIG welding (GTAW) as needed (TIG welding is a plus), • Fit, tack, weld, and finish custom, non-repetitive assemblies, • Fabricate sheet metal and structural components from prints, • Read and interpret blueprints, weld symbols, and job travelers, • Measure, layout, and verify parts throughout the job, • Grind and clean welds as required by job specifications, • Use standard shop tools (grinders, saws, drills, etc.), • Maintain weld quality, appearance, and structural integrity, • Follow shop safety, quality, and scheduling requirements, • Keep your work area clean and organized What We’re Looking For • Proven experience in a job shop welding/fabrication environment, • Not a production-only welder, • Strong MIG welding experience, • Experience welding carbon steel, aluminum, and stainless steel, • Ability to read prints and weld symbols without assistance, • Strong fit-up, layout, and problem-solving skills, • Comfortable working on changing jobs and priorities, • Reliable, punctual, and able to work independently, • Able to lift up to 50 lbs. and be on your feet for extended periods Preferred (Nice to Have) • TIG welding experience, • Welding certifications (AWS or similar), • Experience working from incomplete or evolving prints, • Experience grinding welds for appearance or coating Skill Verification Your welding and fabrication skills will be tested during the interview process. Applicants must bring their required personal welding equipment to complete a hands-on weld/fabrication test. You should be proficient in: • GD&T, • Tape Measure Reading, • Welding Setups for Production, • Blueprint Reading Machines & technologies you'll use: • MIG Welder, • TIG Welder, • 2D Drawings

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Intellectual Satisfaction: Being part of a team that executes unique and challenging projects throughout the country and actually builds something is an exciting endeavor. Our Core Principles • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods., • Personal Development: Every employee should assist in the development of co-workers just as each employee should pursue their own personal development. Mentor and teammate relationships lay the groundwork for future growth and rewards. We are currently looking to hire a full-time Tank Builder / Welder (Nationwide) Day to Day Duties: • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members., • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matter To Apply: If interested, complete the job application from our website at www.phillipstank.com/careers. We are an Equal Employment Opportunity employer. Powered by JazzHR EjRhDyUgKY

Job Description Company Description Midsouth Steel is an industry leader in the fabrication and erection of structural and miscellaneous steel. We offer high employee satisfaction and excellent benefits at a company with low turnover and high stability. Role Description This is a full-time on-site role for Welders/Fabricators at Midsouth Steel in College Park, GA. As a Welder/Fabricator, you will be responsible for welding and fabricating metal parts, reading and interpreting blueprints, and ensuring the quality and integrity of the final product. We have needs for Fabricators on our first and second shifts. Qualifications • Proficiency in welding techniques such as MIG, welding, • Ability to read and interpret blueprints and technical drawings, • Experience with operating welding equipment and tools, • Experience welding and fabricating on structural and miscellaneous steel., • Knowledge of safety procedures and practices in a welding environment, • Strong attention to detail and quality workmanship, • Certification or diploma in welding or a related field is a plus, • MUST BE ABLE TO PASS A DRUG TEST Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance Powered by JazzHR v6faceBQJ3

Job DescriptionWe are looking for skilled Welders to join a fast-paced manufacturing team. In this role, you will perform welding on various metal components, ensuring strong, precise, and high-quality welds. This position requires attention to detail, hand-eye coordination, and the ability to work safely in a manufacturing environment.Key Responsibilities: • Perform welding (MIG/TIG/Stick as applicable) on metal components, • Read and interpret blueprints, work orders, or specifications, • Inspect welds for quality, accuracy, and adherence to standards, • Operate welding equipment safely and maintain tools, • Follow all safety protocols and company procedures, • Assist with fabrication and assembly tasks as neededQualifications:, • Previous welding experience in a manufacturing or fabrication environment, • Knowledge of MIG, TIG, or Stick welding preferred, • Ability to read blueprints and work instructions, • Strong hand-eye coordination and attention to detail, • Ability to lift, bend, twist, and stand for extended periods, • Reliable, punctual, and team-orientedPhysical Requirements:, • Frequent lifting and handling of metal components, • Standing for most of the shift, • Bending, twisting, reaching, and holding positions while welding, • Repetitive hand and arm motionsSchedule:, • Monday–Friday, 5:00 AM – 1:30 PMCompany DescriptionConnecting Companies with Good Employees, and Employees with Good Companies!!Connecting Companies with Good Employees, and Employees with Good Companies!!

Job Description Job Description – MIG/TIG Welder Clyde Industries is the preeminent provider of highly engineered boiler efficiency/cleaning systems, spare parts and services for the global pulp & paper industry and a leader in providing equipment and aftermarket part solutions for industrial applications with a topflight team operating in North America, South America, Scandinavia and Indonesia. Clyde Industries has developed significant innovations in our core sootblower offering, encompassing mission critical technologies designed to remove residue and deposits that build up in recovery and power boilers (with such residue creating safety hazards, process efficiency reductions or complete boiler shutdown if not properly eliminated). Clyde Industries not only provides the equipment, but a host of related services and aftermarket assistance to support our customers’ operations, with a particular focus on and expertise in helping established and emerging pulp & paper customers. Clyde Industries is constantly innovating to expand its offerings with a focus on continuing to drive increased value for customers. As a global leader of highly engineered industrial applications and service provider of the highest caliber, Clyde Industries looks forward to building on its history of innovation and superior customer-centric solutions. Clyde Industries is actively hiring for a MIG/TIG Welder. We are seeking an experienced MIG/TIG Welder who has experience operating automatic welders. The candidate must be able to read and understand drawings and weld symbols. Candidate should have experience welding various diameters of pipe materials to include stainless steel. We are looking to hire someone with a service driven attitude that has the desire to learn, grow, and lead by example. This is currently a 2nd shift opening (1:30pm-10:00pm Monday thru Friday. Training will take place for an estimated 1 month with some hours potentially being on day shift from 7:00am-3:30pm Monday thru Friday. Once candidate is fully trained (at the discretion of the trainer) he or she will work on 2nd shift. At times there may be mandatory overtime required to meet production needs. This is a non-exempt position and our targeted hourly rate for the role is $18/hour to $24/hour and offers will be determined based on candidate’s experience. This position is Full Time with comprehensive health and wellness benefits and located at: 4015 Presidential Parkway Atlanta, GA 30340. Summary of Responsibilities (not comprehensive of all tasks): Follow welding procedures and maintain different qualifications for various types of weld joints. Use materials and fillers required for tube welds including dissimilar materials. All tube welders shall be qualified in accordance with ASME Section IX Products are installed in boilers which require special welding criteria to be accepted. Fits and welds assemblies using jigs and fixtures Follow all safe work practices and policies Verifies quality of work and signs off on quality checklists where required Qualifications 2 years welding technical school or equivalent 3 - 5 years of experience as a TIG welder in a manufacturing environment. Must be skilled in all facets of TIG, MIG, and stick welding Proficient at TIG welding including pipe welding Knowledge and ability to heat, form and straighten metal parts to restore alignment from distortion Ability to use precision measuring equipment to inspect dimensions and angles including calipers, micrometers, protractor, and other precision measuring devices Ability to identify any faults in operating equipment or in relation to materials Ability to control the fitting and welding process to avoid problems in relation to excessive distortion, expansion, or shrinkage of welded parts Ability to produce 100% penetration welds that are radio graph acceptable Ability to set up and operate semi-auto welding equipment Ability to fit up pipe/tube sections, flanges and nozzles and nozzle fabrications with accuracy Ability to select and set up welding equipment Ability to ensure welds meet standards and specifications Proficient at MIG welding Ability to use cutting equipment effectively and efficiently Ability to read and understand engineering drawings including weld symbols Proficient at grinding, filing, sanding, and deburring completed parts Math skills to include ability to add, subtract, multiply and divide in all units or measurement including fractions and decimals General Able to work shift hours as mentioned above and overtime as required. Physical Requirements: Must be able to stand for long periods of time. Must be able to lift 30 lbs Environmental Working Conditions: Work for this role is performed inside and outside in an industrial environment and is a very hot environment working around flame and gases. Disclaimer: Nothing in this job description restricts Management’s right to assign or reassign duties and responsibilities to this job at any time. Clyde Industries is an Equal Opportunity/ Affirmative Action employer and provides reasonable accommodation in its application process for qualified individuals with disabilities and disabled veterans. Job Type: Full-time Salary: $18.00 - $24.00 per hour Benefits: 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Referral program Vision insurance Shift: 8 hour shift – 2nd shift (1:30 pm - 10:00 pm) Weekly day range: Monday to Friday Ability to commute/relocate: Atlanta, GA 30340: Reliably commute or planning to relocate before starting work (Required)

Job Description Company Description Midsouth Steel is an industry leader in the fabrication and erection of structural and miscellaneous steel. We offer high employee satisfaction and excellent benefits at a company with low turnover and high stability. Role Description This is a full-time on-site role for Welders/Fabricators at Midsouth Steel in College Park, GA. As a Welder/Fabricator, you will be responsible for welding and fabricating metal parts, reading and interpreting blueprints, and ensuring the quality and integrity of the final product. We have needs for Fabricators on our first and second shifts. Qualifications • Proficiency in welding techniques such as MIG, welding, • Ability to read and interpret blueprints and technical drawings, • Experience with operating welding equipment and tools, • Experience welding and fabricating on structural and miscellaneous steel., • Knowledge of safety procedures and practices in a welding environment, • Strong attention to detail and quality workmanship, • Certification or diploma in welding or a related field is a plus, • MUST BE ABLE TO PASS A DRUG TEST Job Type: Full-time Benefits: • 401(k), • 401(k) matching, • Dental insurance, • Health insurance, • Life insurance, • Paid time off, • Vision insurance

Job DescriptionCompany Description 2nd Shift - 2:30pm-11pm Starting hourly rate: $18.00 + $1.80 Shift Differential = $19.80 per hour Piece Rate Production Bonuses! Quarterly Profit Sharing! Medical Benefits at 30 days! Phoenix Stamping values our makers and we have several opportunities throughout the year to earn additional compensation incentives and awards! Phoenix Stamping is a growing certified Veteran Owned Small Business with a family oriented work environment, great pay and benefits! Our locations in Atlanta, GA, Fort Wayne, IN, and Fort Worth, TX have focused on the production of sheet metal and rod products for various industries since 1986. Through quality and service, our customer base has grown to cover all parts of North America including Canada and Mexico. To continue to improve upon quality and consistency, we continue to grow and add new capabilities, including highly automated manufacturing equipment. We are seeking dynamic candidates who enjoy a fast-paced and team oriented work environment supported by a company with the motto "Customers first, employees always!" Job Description Reports to: Production Supervisor Job Purpose: Primary responsibility is operating MIG welders, but operators may be rotated through other manufacturing processes to support the production schedule. Key Responsibilities and Accountabilities: • Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material, • Examine work pieces for defects and measure work pieces with fixtures or templates to ensure conformance with specifications, • Recognize, set up, and operate hand and power tools common to the welding trade, • Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations, • Weld separately or in combination, • Operate material handling equipment including forklifts, pallet jacks, etc. to move raw material and parts as needed, • Able to lift up to 50lbs, • Perform other duties as required or assigned by supervisor, • Follow all OSHA and internal safety standards Qualifications • High School Diploma, GED, or equivalent work experience, • 1 years minimum verifiable welding experience and/or Technical Diploma, • Must have experience Mig welding Steel, • Ability to perform standard shop computations (math), • Ability to read schematics (blue prints) and engineering drawings, • Ability to perform basic maintenance of equipment, • Ability to read, understand, follow and enforce safety procedures, • Ability to make administrative/procedural decisions and judgments as well as work within a team environment, • Experience working on a variety of metals is a plus Additional Information Phoenix Stamping Group, LLC offers a drug-free work place along with a competitive salary and benefits package. We are an equal opportunity employer (EEO), dedicated to a policy of nondiscrimination in employment on any basis including race, creed, color, age, sex, religion or national origin and in compliance with ADAAA.

Job DescriptionManufacturing Plant Director, OEE & Lean Excellence Ready to orchestrate two Phoenix Stamping Group plants like a well-tuned production system? Who you report to Vice President of Manufacturing What you’ll tackle • Own day-to-day operations and metrics for two facilities—safety, quality, delivery, cost, and people., • Lead Production, Maintenance, Tooling, and Material Handling teams to achieve targets., • Be the safety champion: drive committees, root-cause analysis, corrective actions, and statutory training., • Build and maintain production schedules aligned with customer demand and inventory goals., • Lift OEE to elevate OTD, increase throughput, and optimize variable labor impact on the P&L., • Run shipping/receiving, inventory control (including cycle counts), and material handling equipment maintenance., • Coordinate equipment installations and facility layout initiatives; manage contractors and on-site execution., • Audit standard work and process control plans; reduce defects and avoid cost of poor quality., • Review quality metrics with plant leaders; pinpoint root causes and implement durable fixes., • Right-size staffing; grow and evaluate Supervisors, Leads, and hourly talent., • Identify operator skill gaps; design training with the right internal experts., • Advance a strong 6S culture and visual management; steward the Quick and Easy Kaizen (QEK) program., • Stay current on modern operations methods and translate them into practice for your teams., • Build and manage plant budgets; influence variable labor and operating expenses on the P&L., • Partner cross-functionally to enable change; communicate timelines and deliverables clearly., • Operate within company standards for quality management, health & safety, environmental policy, legal requirements, and ethics. How you’ll be judged, • Safety Recordables (RIR), • Overall Equipment Effectiveness (OEE), • 6S and QEK activity, • COPQ (Cost of Poor Quality), • On-Time Delivery (OTD), • Operating Expense vs. Budget, • Gross Margin % What you bring, • Bachelor’s degree in a technical field or equivalent hands-on experience, • 5+ years leading teams in manufacturing, • Metal stamping/fabrication background preferred, • Deep Lean manufacturing toolkit and mindset, • Demonstrated P&L responsibility and impact, • Quality system experience (ISO 9001:2015 a plus), • Fluency in Excel-based data analysis and ERP reporting, • Proven ERP-based scheduling expertise, • Clear, influential communicator and seasoned people leader Professional strengths we value, • Leadership / People Management, • Continuous Improvement, • Standard Operating Procedures (SOPs), • Supervisory Experience, • OSHA 10-Hour Certification (OSHA 10), • Production Optimization, • Lean Manufacturing Principles, • Coaching & Mentoring Experience, • Operational Metrics & KPI Management, • ERP & MRP Systems, • Production Planning & Scheduling, • Inventory Management & Control, • Workplace Safety & EHS Management, • Scheduling Experience, • Budgeting / Forecasting Experience Tools, machines, and tech you’ll touch, • MIG Welder, • Thread Gauges (GO/NO-GO), • CNC Laser Cutter, • Punch Press, • Press Brake, • Stamping Press, • Cold Heading Machine, • Robotic Welder, • ERP Software, • Calipers and Micrometers, • Industrial Robot

Job DescriptionStructural Welder $30-32/hour + $125 Per Diem located in Cape Canaveral, Florida! Job Description: located in Cape Canaveral, Florida! This role focuses on welding and fabricating launch hardware used in cutting-edge spaceflight applications. You will perform high-quality structural welding on carbon steel, stainless steel, and aluminum using multiple welding processes, while working from engineering drawings and specifications. The position requires strong technical welding skills, attention to detail, and the ability to collaborate closely with leads and team members to support efficient, precise, and safe production of mission-critical hardware. Responsibilities: located in Cape Canaveral, Florida! • Perform welding using flux cored arc welding (FCAW), gas metal arc welding (GMAW), and shielded metal arc welding (SMAW) on carbon steel, stainless steel, and aluminum structural shapes, tubing, and plates., • Cut, trim, fit, and fabricate weldments to specified dimensions using standard tools, materials, and techniques common to the welding trade., • Build and assemble structural and pipe components in accordance with engineering drawings, weld symbols, and fabrication requirements., • Collaborate with the lead welder to determine and verify appropriate weld procedures, base materials, filler materials, and rod sizes for each project., • Review and interpret engineering drawings, blueprints, and specifications to plan welding operations, including situations where detailed procedural information is not provided., • Inspect welds visually for quality, accuracy, and adherence to applicable codes and internal standards, and make necessary adjustments to improve results., • Contribute to continuous improvement by seeking ways to improve operations, reduce turnaround times, and streamline work processes., • Work cooperatively with other welders, fitters, and support staff to maintain an efficient, safe, and effective work environment., • Perform other related duties as assigned to support production schedules, team objectives, and operational needs.Job Type & Location This is a Contract position based out of Atlanta, GA. Pay and Benefits The pay range for this position is $30.00 - $37.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Atlanta,GA. Application Deadline This position is anticipated to close on Jul 21, 2026. About Aerotek Aerotek® Inc. provides staffing and services solutions in manufacturing, logistics, construction, aviation, facilities and maintenance. We provide the expertise, solutions and people required to rise to the challenges of North American industry. Headquartered in Hanover, Md., Aerotek operates a unified network of over 200 offices across North America, supporting more than 18,000 clients each year. Aerotek is an Allegis Group company, the global leader in workforce and business solutions. To learn more, visit: Aerotek.com | 1-888-AEROTEK. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. San Francisco Fair Chance Ordinance: Pursuant to the San Francisco Fair Chance Ordinance, for all positions located in the city and county of San Francisco, we will consider for employment qualified applicants with arrest and conviction records. Massachusetts Lie Detector: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Use of Artificial Intelligence (AI): We may use Artificial Intelligence (AI) to support parts of our hiring process, including sourcing, screening, and evaluating candidates. AI helps assess applications and qualifications, but final decisions are made by our hiring team. By applying, you acknowledge and agree that your application may be reviewed using AI tools. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job DescriptionDescription: POSITION SUMMARY Our growing company is currently in need of a responsible individual to fill the position of Facilities Maintenance Technician. The Technician will report to the Facilities and Maintenance Manager and will be responsible for inspecting, maintaining and repairing mechanical, electrical, plumbing, fueling equipment and HVAC systems to ensure optimal operating results. The successful candidate will oversee the company’s facility operations, potentially manage staff with future growth, manage office moves and manage janitorial duties, all while remaining in compliance with local, state and federal regulations. Upholds store operations by maintaining and repairing all equipment from fuel dispensers, fast food equipment, restroom fixtures, involved with new store development needs and landscape work. This position is a Gas Express, LLC - Circle K Atlanta designated safety sensitive position. ESSENTIAL FUNCTIONS • Maintains fuel equipment by troubleshooting, repairing, cleaning and maintaining gasoline dispensers and related equipment. Provides preventive maintenance and testing of the fuel system(s). Maintains gas dispensers by changing nozzles, hoses, splashguards, filters, electronic circuit boards, and displays. Work with regulatory agencies to maintain compliance of fueling equipment. • Keeps equipment, systems, and building ready for use by repairing equipment, doors, plumbing, floor tiles, painting, food service equipment, and other items inside and outside of the stores. • Maintains parking lot striping, bollard, curb and fuel island painting., • Work on all fast food equipment from fountains, hot food equipment and any money generating equipment., • Maintain safe and clean work environment by complying with Circle K Atlanta/OSHA procedures, rules, and regulations., • Work with Circle K Atlanta Market Managers to facilitate repairs without sourced vendors., • Maintain and work on plumbing and minimal electrical items, such as outlets and light switches., • Maintains continuity among work teams by documenting and communicating actions, irregularities and continuing needs., • Required to participate in training for existing and new equipment., • Contributes to team effort by accomplishing related tasks as needed., • Ensure a safe working environment exists for employees and customers.Requirements: QUALIFICATIONS • High school diploma or GED required., • Prefer journeyman and/or certified electrician, plumbing, welder or general contracting experience., • EPA certified HVAC technician for small appliances, high-pressure refrigerants and/or low-pressure refrigerants., • 5 years’ experience in prior facilities maintenance role in the convenience, restaurant or other retail related industry., • Must possess basic computer skills., • Available to be on-call 24/7. Schedule must be flexible. Work week may be up to and exceed 55 hours per week., • Requires manual dexterity to operate equipment., • Requires the ability to use power and hand tools., • Must possess necessary basic hand tools., • Possess valid drivers’ license and be insurable as a driver., • Excellent communication skills, general accounting principles, and a professional attitude., • Computer literate and proficient in the use of Microsoft Word, Excel, and email services., • Must have proven people skills. Able to motivate employees and resolve conflict in a team environment., • Demonstrates effective problem solving/analytical skills and pays attention to details., • Requires after-hours on-call service functions, • Must be able to work in a fast-paced environment with multiple changing priorities., • Ability to work independently in high priority, confidential and demanding business environment PHYSICAL DEMANDS • Ability to crouch, crawl, push, pull, bend, stoop, and/or reach, • Ability to carry, erect, and climb ladders, • Ability to lift up to 80 pounds ? Excellent communication skills, general accounting principles, and a professional attitude. ? Computer literate and proficient in the use of Microsoft Word, Excel, and email services. ? Must have proven people skills. Able to motivate employees and resolve conflict in a team environment. ? Demonstrates effective problem solving/analytical skills and pays attention to details.

Job Description Trailer Mechanic Discover a career at Depot Connect International (DCI), a global leader in the Tank/ISO Tank Container Services and Tank Trailer Parts industry. We're more than just a service provider; we're a unified team combining the expertise of industry leaders Quala, Boasso Global, and PSC. Headquartered in Tampa, Florida, with over 160 locations worldwide, our team of over 3,500 employees excels in offering a multitude of mission-critical services. We are currently searching for DOT inspection certified mechanics with 2 to 5 years of tank trailer repair experience! Address: 4367 Old McDonough Rd, Conley, GA. 30288 Shift Hours: Monday through Friday, 8:00 AM to 4:30 PM Pay Range: $18.00 to $36.00 per hour, dependent on experience. Skill-based pay rate reviews and potential increases every 6 months. Demonstrated skill in most of the following areas: • The ability to diagnose failures and make repairs on mechanical, electrical or other various systems on a tank trailer., • Tank service and repair, • Trailer suspension installation and repair, • Experience with air brake systems and repairs, • TIG aluminum, stainless or carbon welding experience (optional), • Ability to effectively and efficiently inspect tanks and trailers to align with DOT standards (HM183, hazmat) Physical Demands: • The employee must regularly lift and/or move up to 50 pounds, • With assistance, occasionally lift and/or move up to 75 pounds, • Must be able to fit through a tank trailer manhole, • Must be able to work in confined spaces DCI Benefits: • Medical, dental and vision insurance, • 401(k) with generous employer match, • Paid time off, including 10 paid holidays, • Optional health savings account & flexible spending account, • Life insurance, • Employee assistance program, • Parental leave, • Referral program, • Tuition reimbursement, • Tool purchase program, • Effective and proven safety program, • Resources to become a national board ASME certified welder

Job Description Why DH Pace? The DH Pace Company is a family-owned and privately held business with annual sales over $1 billion through 60+ offices located across the continental United States. The Company is an industry leader in the distribution, installation, maintenance, and repair of a complete range of commercial, industrial, and residential door, docking and security products. In 2026, DH Pace is celebrating its 100th anniversary in business. DH Pace Company, Inc. is seeking a Fleet Mechanic in Peachtree Corners, GA. Our service center handles a large fleet of Ford service trucks (E and F series light duty gasoline engines) and sales vehicles. If you bring automotive mechanical skills and are eager to learn under the guidance of an experienced team, this job may be for you! Job Responsibilities: • Performs thorough and accurate Preventative Maintenance inspections, • Completes all required preventative maintenance operations including lubrication, fluid changes, brake adjustments, and tire rotation, • Must operate non-CDL vehicles (light-duty) to perform road tests, as well as shuttle in and out of the garage for repairs and maintenance, • The ability to operate bench grinder, torch, welder, oil pumps, power washer, brake lathe and other hand tools required to perform work is a plus., • Document repairs and parts on work orders completely and accurately, • Maintains tools and workplaces so that conditions are neat and orderly, • Must be thoroughly familiar with all safety provisions associated with vehicle maintenance, • Other responsibilities as assigned Job Qualifications: • Minimum of 6 months of verifiable automotive mechanic experience, including preventative maintenance or equivalent education., • Able to safely lift 100 pounds, • Complete set of tools required, • High School diploma or GED, • Must have excellent communication and organizational skills, • Good mechanical aptitude, • Valid driver's license - must be able to meet all requirements to operate commercial vehicles What We Offer • Comprehensive medical, dental, and vision coverage — available your first full month, • Generous paid time off plus paid holidays and floating holidays, • Company-paid life insurance, short-term disability, and long-term disability, • 401(k) with employer match, • Health Savings Account (HSA) and Flexible Spending Account (FSA) options, • Voluntary benefits including supplemental life and critical illness coverage, • Employee discounts for you and your immediate family, • Competitive compensation with annual performance reviews Successful completion of references, employment verifications, background check, drug screen, and driving record (if applicable) required in advance of hire. DH Pace Company, Inc. does not accept unsolicited resumes from search firms or agencies. Any resume submitted to any employee of DH Pace Company, Inc. without a prior written search agreement will be considered unsolicited and the property of DH Pace Company, Inc. Please, no phone calls or emails. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Since 1953, Ferguson has been a source of quality supplies for a variety of industries. Together We Build Better infrastructure, better homes and better businesses. We exist to make our customers' complex projects simple, successful, and sustainable. We proactively solve problems, adapt and grow to continuously serve our customers, communities and each other. Ferguson, a Fortune 500 company, is proud to provide best-in-class products, service and capabilities across the following industries: Commercial/Mechanical, Facilities Supply, Fire and Fabrication, HVAC, Industrial, Residential Trade, Residential Building and Remodel, Waterworks and Residential Digital Commerce. Ferguson has approximately 36,000 associates across 1,700 locations. Ferguson is a community of proud associates who operate with the shared purpose of building something meaningful. You will build a career that you are proud of, at a company you can believe in. Ferguson is currently seeking the right individual to fill an immediate need for a Welder! If you have welding experience coupled with a commitment to great customer service, this is the position for you! Schedule: M-F 2:30pm-11:30pm (2nd Shift) • Weld outlets onto steel pipe to serve the fire sprinkler industry, • Perform specialty welding tasks; spool pieces, flanges, etc., • Inspects work for defects, dimensions, alignment, end preparations, and seam splits in pipe, • Maintain a clean and safe welding station while conforming to standards of quality and performance, • Reports all equipment malfunctions, safety issues, and required repairs, • 1 to 3 years of welding experience preferred, • Proficiency in Microsoft Office applications, • Strong interpersonal skills and ability to prioritize workload appropriately in order to balance multiple demands and meet timelines, • Continued focus on improving system efficiencies and business practices, • Attention to detail, demonstrated integrity, and professionalism, • Desire to learn new things, • Ability to thrive in an inclusive environment At Ferguson, we care for each other. We value our well-being just as much as our hard work. We are committed to a holistic approach towards benefits plans and programs that support the mental, physical and financial well-being of our associates. Our competitive offering not only includes benefits like health, dental, vision, paid time off, life insurance and a 401(k) with a company match, but our associates also enjoy additional meaningful and inclusive enhancements that are adaptable to their diverse situations and needs, including mental health coverage, gender affirming and family building benefits, paid parental leave, associate discounts, community involvement opportunities and more! $17.41 - $26.11 Estimated Ranges displayed are Monthly for Salaried roles OR Hourly for all other roles. This role is Bonus or Incentive Plan eligible. Ferguson complies with all wage regulations. The starting wage may be higher in certain locations based on local or state wage requirements. The Company is an equal opportunity employer as well as a government contractor that shall abide by the requirements of 41 CFR 60-300.5(a), which prohibits discrimination against qualified protected Veterans and the requirements of 41 CFR 60-741.5(A), which prohibits discrimination against qualified individuals on the basis of disability. Ferguson Enterprises, LLC. is an equal employment employer F/M/Disability/Vet/Sexual Orientation/Gender Identity. Equal Employment Opportunity and Reasonable Accommodation Information