Trabajos welder en Pittsburgh, PennsylvaniaCrear alertas

Job Description Travel Welder/Fabricator Position Job Title: Structural Welder/Fitter $45 & $140 in per diem. This position is located in Newport News, Virginia paying $45 and $140 in per diem Job Description We are seeking an experienced Advanced Shipfitter with a minimum of four years of commercial or naval experience as a first-class Shipfitter The ideal candidate will have extensive skills in single pass tack welding, burning, heating, and the ability to read and comprehend complex structural assembly drawings, blueprints, and sketches. Responsibilities • Perform multi-pass tack welding using the Shielded Metal Arc Welding (SMAW) process., • Operate burning and heating equipment, specifically oxygen/propane burning torches., • Interpret complex structural assembly drawings, blueprints, and sketches, including weld symbols, material types, datum, and reference lines., • Comprehend fractional dimensions using a ruler and lay off piece parts for fabrication and assembly., • Assemble structural piece parts according to specifications with high-quality standards., • Work effectively in physically demanding environments such as shipbuilding or steel fabrication., • Ensure compliance with OSHA regulations relevant to the shipbuilding industry., • Single & Multi Pass Tack Welding, • Burning using Oxygen/Propane Burning Torch, • Heating using Oxygen/Propane Heating Torch, • Ability to read and interpret complex structural assembly drawings, blueprints, and sketches, • Ability to comprehend fractional dimensions using a ruler The pay range for this position is $45.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision, • Critical Illness, Accident, and Hospital, • 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available, • Life Insurance (Voluntary Life & AD&D for the employee and dependents), • Short and long-term disability, • Health Spending Account (HSA), • Transportation benefits, • Employee Assistance Program, • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Pittsburgh,PA. Application Deadline This position is anticipated to close on Oct 31, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description NOW HIRING WELDERS IN TURTLE CREEK, PA!! We are actively searching for multiple welders to join our team. You will have the opportunity to join a reputable company and build a rewarding career while earning competitive wages. If you are interested in furthering your welding career, you are encouraged to apply today! Qualifications: • Prior experience in Flux Core welding., • Must be able to read/interpret blueprints., • $30.00-$36.00/HR- dependent on experience The pay range for this position is $63003.00 - $70000.00/yr. This is a Union environment that offers a high starting pay rate, and Four different health plans through Highmark. Dental and vision offered as well. 401k plan up to 5% match. Workplace Type This is a fully onsite position in Turtle Creek,PA. Application Deadline This position is anticipated to close on Oct 31, 2025. About Aerotek: We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies’ construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. Company DescriptionWe know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meet their goals, skills, and interests. Since 1983, we have provided a variety of career opportunities across North American industry – from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role in solving companies’ construction, manufacturing, and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are-everything spirit to the test as your career continues to grow.

Job Description About us: For over 70 years, Tri-Arc Manufacturing has been offering state-of-the-art, steel configurable ladder and platform products. Located 20 minutes from downtown Pittsburgh, Tri-Arc proudly carries on Pittsburgh’s steel city industrial history by manufacturing our products at home in the U.S. Tri-Arc is an industry leader with the widest variety and highest quality of custom fabricated climbing products, specializing in the U-Design Configurable Products tailoring to the needs of our customers to operate safely and efficiently. Tri-Arc has immediate openings for 2nd Shift Mig Welder/Fabricator, Monday to Friday, 2:30 pm to 11:00 pm. These are full-time positions and Tri-Arc offers a competitive starting rate along with a generous benefit package, and the right candidate(s) will have the opportunity to join the United Steelworkers Union after completing 520 probationary hours. All candidates are required to take and pass a welding test and bring their own welding gear. This is an excellent opportunity for welders who like a challenge and want to become a skilled craftsman. Essential Functions: • Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies., • Assemble, align, and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components., • Lays out, positions, aligns, and fits components together (usually in fixtures)., • Bolts, clamps, and tack-welds parts to secure in position for welding., • Reads job specifications to determine machine adjustments and material requirements., • Sets up equipment and welds parts, using MIG welding equipment., • Assembles parts by bolting and riveting., • Operates various punch presses, drill presses, shears, saws, and tube bending equipment., • 6 + months of welding experinece, • Must be able to sit, stand, kneel, stoop, walk, or sit for long periods of time, • Must be capable of working in inclement conditions to include extreme hot and cold temperatures, • Competitive Starting Rate ($24.93/hour), • PTO, • Medical, Dental, Vision, • 401K plan, • Referral program, • Friendly, Collaborative Team Environment, • Personal and Professional Growth Potential As a unionized workplace, Triarc Manufacturing values collaboration with our union partners to ensure fair treatment, equitable opportunities, and respect for the rights of all employees. Employment decisions at Triarc Manufacturing are based on business needs, job requirements, and individual qualifications. We are dedicated to fostering a safe, diverse, and supportive work environment where every employee can contribute to our shared success. Company DescriptionFor over 70 years, Tri-Arc Manufacturing has been offering state of the art, steel configurable ladder and platform products. Located 20 minutes from downtown Pittsburgh, Tri-Arc proudly carries-on Pittsburgh’s steel city industrial history by manufacturing our products at home in the U.S. Tri-Arc is an industry leader with the widest variety and highest quality of custom fabricated climbing products, specializing in the U-Design Configurable Products tailoring to the needs of our customers to operate safely and efficiently. U-Design Configurable Products tailoring to the needs of our customers to operate safely and efficiently.For over 70 years, Tri-Arc Manufacturing has been offering state of the art, steel configurable ladder and platform products. Located 20 minutes from downtown Pittsburgh, Tri-Arc proudly carries-on Pittsburgh’s steel city industrial history by manufacturing our products at home in the U.S. Tri-Arc is an industry leader with the widest variety and highest quality of custom fabricated climbing products, specializing in the U-Design Configurable Products tailoring to the needs of our customers to operate safely and efficiently. U-Design Configurable Products tailoring to the needs of our customers to operate safely and efficiently.

Job Description URGENT: Steel Welders Needed - START MONDAY 10/20! IMMEDIATE HIRE - 5 POSITIONS AVAILABLE Location: Bedford, PA Start Date: THIS MONDAY, October 20th Contract Duration: Through November 7th (potential extension) Pay Rate: $30/hour + $100/day per diem ($700/week) for those that qualify (if traveling 100+miles roundtrip) ⚠️ URGENT - APPLY TODAY Allied Reliability, needs 5 qualified Steel Welders to start THIS MONDAY for a short-term, high-paying contract with excellent overtime opportunities. Requirements • MUST have D1.1 welder certification OR current certification that includes structural steel welding, • Ability to work night shifts, • Travel welders welcome Schedule & Hours • Shift 1 (2 positions): Sunday-Thursday, 8:30 PM - 6:30 AM, • Shift 2 (3 positions): Sunday-Thursday, 8:30 PM - 4:30 AM, • Guaranteed Overtime: 18 hours per week for ALL positions Exceptional Pay Package • Base pay: $30/hour, • Per diem: $100/day ($700/week), • 18 hours guaranteed OT weekly, • Strong weekly earnings despite short-term assignment Ideal Candidates Experienced structural steel welders and former contractors encouraged to apply immediately. ⏰ DON'T WAIT - POSITIONS START MONDAY! APPLY NOW! Company DescriptionAllied Reliability specializes in protecting assets and driving reliability improvements for reciprocating and rotating machinery using proven solutions and in-depth application expertise. We leverage internal engineering, manufacturing, and project management capabilities, as well as the resources of leading manufacturing partners, to yield meaningful improvements in productivity, longevity, efficiency, cost-effectiveness, safety, and environmental compliance.Allied Reliability specializes in protecting assets and driving reliability improvements for reciprocating and rotating machinery using proven solutions and in-depth application expertise. We leverage internal engineering, manufacturing, and project management capabilities, as well as the resources of leading manufacturing partners, to yield meaningful improvements in productivity, longevity, efficiency, cost-effectiveness, safety, and environmental compliance.

Job Description (Temp-to-Perm) Pay: 23–25/hr (based on experience) Schedule: Monday–Thursday, 5:00 AM – 3:30 PM (OT available but not required) About the Role: We’re looking for a skilled Welder with 3–5 years of experience. Stainless steel and GMAW short arc experience is preferred. This role requires precision, attention to detail, and the ability to pass FCAW and GMAW weld tests. Responsibilities: * Perform high-quality welds to meet customer and company standards * Read and interpret blueprints and specifications * Maintain a safe, clean, and organized work area * Operate tools and equipment such as grinders, cranes, and forklifts * Complete job documentation and weld identifications * Support team operations and meet production deadlines Requirements: * 3+ years welding experience (stainless steel preferred) * High School diploma or GED (trade school certification a plus) * Ability to pass required weld tests (FCAW 3G CS Open Root vertical up & GMAW 3G CS Open Root vertical down) * Strong safety mindset and reliability * Physical ability to lift up to 50 lbs and work in a fast-paced environment Why Join Us: * Competitive starting pay: 23–25/hr * Steady daylight schedule (3-day weekends!) * Temp-to-perm opportunity with growth potential Apply now to start your next welding career with us! Pay Details: 23.00 to 25.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: • The California Fair Chance Act, • Los Angeles City Fair Chance Ordinance, • Los Angeles County Fair Chance Ordinance for Employers, • San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Company DescriptionSince 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements. PDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial. We offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan. Now part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more.Since 1977, the PDS family of companies has become among the largest and most respected staffing companies in the United States. A vital part of the PDS family, PDS Tech Commercial connects highly skilled employees with Fortune 500 clients’ needs for project support such as contingent labor, statement of work/offload engineering projects, and permanent placements.\r\n\r\nPDS Tech Commercial has staffing partnerships with leading organizations based in the United States and globally. We hire jobseekers daily for openings across skill categories, including Engineering, IT, Business Professional, Administrative, Accounting/Finance, Skilled Trades and Industrial.\r\n\r\nWe offer eligible associates an ala carte benefits package, that can include direct deposit, free career counseling, 401(k), select paid holidays, short-term disability insurance, skills training, employee referral bonuses, and an affordable medical coverage plan.\r\n\r\nNow part of The Adecco Group, our shared synergies combined with the investment Adecco continues to make in PDS offers significant advantages to both clients and associates alike. We share Adecco’s dedication to unlocking our Associates’ potential by unleashing the Future@Work and to the importance of human and labor rights, diversity and inclusion, environmental responsibility, and more.

Job Description About us: For over 70 years, Tri-Arc Manufacturing has been offering state-of-the-art, steel configurable ladder and platform products. Located 20 minutes from downtown Pittsburgh, Tri-Arc proudly carries on Pittsburgh’s steel city industrial history by manufacturing our products at home in the U.S. Tri-Arc is an industry leader with the widest variety and highest quality of custom fabricated climbing products, specializing in the U-Design Configurable Products tailoring to the needs of our customers to operate safely and efficiently. Tri-Arc has immediate openings for 1st Shift (6:00 am to 2:30 pm) Mig Welder/Fabricators, Monday to Friday. These are full-time positions and Tri-Arc offers a competitive starting rate along with a generous benefit package. Tri-Arc also offers a generous benefit package, and the right candidate(s) will have the opportunity to join the United Steelworkers Union after completing 520 probationary hours. All candidates are required to take and pass a welding test and bring their own welding gear. This is an excellent opportunity for welders who likes a challenge and want to become a skilled craftsman. Join us! Essential Functions: • Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies., • Assemble, align, and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components., • Lays out, positions, aligns, and fits components together (usually in fixtures)., • Bolts, clamps, and tack-welds parts to secure in position for welding., • Reads job specifications to determine machine adjustments and material requirements., • Sets up equipment and welds parts, using MIG welding equipment., • Assembles parts by bolting and riveting., • Operates various punch presses, drill presses, shears, saws, and tube bending equipment., • 6 + months of welding experinece, • Must be able to sit, stand, kneel, stoop, walk, or sit for long periods of time, • Must be capable of working in inclement conditions to include extreme hot and cold temperatures, • Competitive Starting Rate ($24.93/hour), • PTO, • Medical, Dental, Vision, • 401K plan, • Referral program, • Friendly, Collaborative Team Environment, • Personal and Professional Growth Potential As a unionized workplace, Triarc Manufacturing values collaboration with our union partners to ensure fair treatment, equitable opportunities, and respect for the rights of all employees. Employment decisions at Triarc Manufacturing are based on business needs, job requirements, and individual qualifications. We are dedicated to fostering a safe, diverse, and supportive work environment where every employee can contribute to our shared success. Company DescriptionFor over 70 years, Tri-Arc Manufacturing has been offering state of the art, steel configurable ladder and platform products. Located 20 minutes from downtown Pittsburgh, Tri-Arc proudly carries-on Pittsburgh’s steel city industrial history by manufacturing our products at home in the U.S. Tri-Arc is an industry leader with the widest variety and highest quality of custom fabricated climbing products, specializing in the U-Design Configurable Products tailoring to the needs of our customers to operate safely and efficiently. U-Design Configurable Products tailoring to the needs of our customers to operate safely and efficiently.For over 70 years, Tri-Arc Manufacturing has been offering state of the art, steel configurable ladder and platform products. Located 20 minutes from downtown Pittsburgh, Tri-Arc proudly carries-on Pittsburgh’s steel city industrial history by manufacturing our products at home in the U.S. Tri-Arc is an industry leader with the widest variety and highest quality of custom fabricated climbing products, specializing in the U-Design Configurable Products tailoring to the needs of our customers to operate safely and efficiently. U-Design Configurable Products tailoring to the needs of our customers to operate safely and efficiently.

Job DescriptionDescription: About us: For over 70 years, Tri-Arc Manufacturing has been offering state-of-the-art, steel configurable ladder and platform products. Located 20 minutes from downtown Pittsburgh, Tri-Arc proudly carries on Pittsburgh’s steel city industrial history by manufacturing our products at home in the U.S. Tri-Arc is an industry leader with the widest variety and highest quality of custom fabricated climbing products, specializing in the U-Design Configurable Products, tailoring to the needs of our customers to operate safely and efficiently. Tri-Arc has immediate openings for 2nd Shift Mig Welder/Fabricator, Monday to Friday, 2:30 pm to 11:00 pm. These are full-time positions and Tri-Arc offers a competitive starting rate along with a generous benefit package, and the right candidate(s) will have the opportunity to join the United Steelworkers Union after completing 520 probationary hours. All candidates are required to take and pass a welding test and bring their own welding gear. This is an excellent opportunity for welders who like a challenge and want to become a skilled craftsman. Essential Functions: • Set up, operate, or tend welding machines that join or bond components to fabricate metal products or assemblies., • Assemble, align, and clamp workpieces into holding fixtures to bond, heat-treat, or solder fabricated metal components., • Lays out, positions, aligns, and fits components together (usually in fixtures)., • Bolts, clamps, and tack-welds parts to secure in position for welding., • Reads job specifications to determine machine adjustments and material requirements., • Sets up equipment and welds parts, using MIG welding equipment., • Assembles parts by bolting and riveting., • Operates various punch presses, drill presses, shears, saws, and tube bending equipment., • 6 + months of welding experinece, • Must be able to sit, stand, kneel, stoop, walk, or sit for long periods of time, • Must be capable of working in inclement conditions to include extreme hot and cold temperatures, • Competitive Starting Rate ($24.93/hour), • PTO, • Medical, Dental, Vision, • 401K plan, • Referral program, • Friendly, Collaborative Team Environment, • Personal and Professional Growth Potential As a unionized workplace, Triarc Manufacturing values collaboration with our union partners to ensure fair treatment, equitable opportunities, and respect for the rights of all employees. Employment decisions at Triarc Manufacturing are based on business needs, job requirements, and individual qualifications. We are dedicated to fostering a safe, diverse, and supportive work environment where every employee can contribute to our shared success. Requirements:

Job DescriptionPosition: Welder (FCAW & GTAW) Location: East Pittsburgh, PA; Holtec Manufacturing Division Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for the nuclear, energy, and heavy industrial sectors. Ideal candidates will have hands-on experience in multiple welding positions and processes and a strong commitment to quality, safety, and precision in a heavy-plate manufacturing environment. The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic, semi-automatic, and manual welding equipment. Welders are expected to follow technical drawings and specifications to ensure that all work meets Holtec’s rigorous quality standards. Minimum required qualifications include: High School diploma or GED required. Minimum of 2–4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices. Additional desirable qualifications: Previous certification to ASME Section IX and/or AWS D1.1/D1.6. Experience in nuclear or high-spec industrial fabrication environments. Multi-process welding experience (e.g., SMAW, GMAW, SAW) is a plus. Familiarity with digital weld documentation and inspection tools. Specific Areas of Responsibility: Perform all work in a safe manner in compliance with Holtec’s safety policies and wear appropriate personal protective equipment (PPE) at all times. Prepare, position, align, and fit materials for welding based on engineering drawings, work orders, and WPS (Weld Procedure Specifications). Execute welding operations in all required positions, ensuring high-quality welds that meet visual and X-ray inspection standards. Use tools of measurement and layout techniques to confirm part dimensions and tolerances. Layout, tack weld, heat-bend, clamp, grind, and bolt components to ensure accurate preparation and alignment prior to welding. Monitor the fitting, burning, and welding process to avoid material distortion or overheating. Visually inspect welds for defects, ensuring adherence to AWS and Holtec quality standards. Operate a range of welding equipment (manual, semi-automatic, and automatic), including GTAW, FCAW, SAW, and plasma arc. Safely handle materials and parts using overhead cranes, forklifts, and other material handling equipment. Maintain a clean, safe, and organized work area in compliance with housekeeping and safety standards. *Must pass pre-employment weld tests administered in accordance with Holtec’s WPS requirements. May be required to work overtime, nights, weekends, or travel based on production needs. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references. Powered by JazzHR lURiZtQf7b

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development., • You’ll be part of a team where YOU matter Powered by JazzHR JDtzagn1nr

Job Description The primary focus of the Welder position is to safely fabricate and install as necessary all structural and misc. steel work in accordance with the design documents. This position requires several welding certifications outlined below as well as general construction knowledge. All general welding, fabricating and erection best practices and industry standard applications apply. This position is expected to work within a 90-mile radius of the city of Pittsburgh, and will be an employee of the Pittsburgh, PA office location. Our Success Story: It all started in 1997 when Joe Leonello and his father started their own construction firm. They were soon joined by Joe's brother, Frank, in 2003 and, thus, the Franjo legacy was born. Since its inception, we strive to exceed our client expectations by consistently improving our products and services. We are always on the lookout for the top talent in the industry as we consider our employees one of our greatest assets. We truly celebrate our employee milestones and successes in our industry because without our employees, we would not be where we are today! We have been voted Top Workplace by our employees for 4 years in a row and have also been featured in the Pittsburgh Business Times as one of Pittsburgh's Fastest Growing Companies, Largest Area Construction Contractors, and Family Business Awards winners! Our Mission Safety, Respect, Accountability, Efficiency, Empowerment, Creativity, Loyalty... We feel strongly about every one of those, but we also feel they are the minimum every company should abide by. So, what makes us different? How do Franjo team members operate? Well, we speak to each other with radical candor. We work hard so we can play hard. We have each other's backs. We are committed to building a legacy - the Franjo Legacy. Our Mission: Uniting our team and customers to build the future. Our Vision: Exceeding expectations. Building trust. Creating value. Our Values: Persistence - Never give up. Ambition - Driven to achieve the unimaginable. Confidence - Humble enough to learn from experience. Does that align with your ideals and core values? Well, great news! We are looking to add a Welder to our growing team! What you'll do: • Ability to safely operate all types of steel working equipment and hand tools., • Knowledge of structural steel assemblies/details typically used in commercial building construction., • Welding certificates in MIG, Fluxcore, and Stick Welding or have proven, proficient relevant experience in lieu of certificates., • Able to read all drawings and associated design documents., • Structural and misc. fabrication experience., • Perform layout, cutting, and welding as specified by shop drawings for both structural and misc. steel operations., • Knowledge of fabrication shop safety and best practices., • Fabricate beams, columns, angles, plates, and connections per the design documents., • Cutting experience to include torch, plasma, mechanical and grinding., • Erection experience to include rigging, field welding and bolted assemblies as required, general structural/misc. erection skills and hand signal training., • Safely operate under OSHA standards fall protection guidelines. Certified fall protection training required., • Safely operate all equipment to perform daily erection activities including but not limited to man-lifts, scissor lifts, forklifts, stud machines etc., • Safely erect, maintain and dismantle scaffolding systems for daily construction activities., • Safely load and unload building material deliveries., • Maintain production quantities as outlined by the project schedule., • Respond in an expeditious and timely manner to all work requests regarding fabrication and erection expertise., • Assist in loading and unloading building material., • Provide input on jobsite logistics, organization, layout, equipment, and manpower utilization., • Clean project site/fabrication shop and maintain order with all tools and equipment., • Have knowledge of foundations, building structures and construction sequencing., • Mold, shape or form all metals., • Perform clean-up procedures., • Adhere to comprehensive project safety and security programs as defined in the company safety program in accordance with all applicable safety codes and regulations., • Meet with the Safety Director and complete mandatory safety training prior to start of employment., • Results driven., • Strong project and time management. Completion of apprentice/vocational program or an equivalent combination of training/education and a minimum of 5 years field or fabrication shop experience. What we offer you in return: Competitive salary and benefits package which includes, medical, dental, and vision, 401(k), employee wellness, supplemental insurance, paid time off, education and training, quarterly jobsite lunches, holiday parties, and so much more! Do you have additional questions? Please reach out to our Human Resources Manager for more information! What are you waiting for? Apply today! Franjo Construction Corporation is an Equal Opportunity Employer. Prohibited by the Company include, but are not limited to, the following: Any misrepresentation of facts or falsification of records, including falsification of employment applications, resumes or any Company pre- or postemployment forms, and any other form of dishonesty. Must be able to pass a 7 year background check. We also conduct pre-employment drug testing. Job offers are contingent upon the successful completion of a background investigation and pre-employment drug screen.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: • Our people are our #1 priority., • Teamwork is the best way to solve problems., • Safety is critical. Everyone is responsible for creating a safe work environment., • We strive to find new and better ways of doing things every day., • Clear expectations and directions are always given., • Frequent coaching and support lead to great performers and high quality for our customers., • A manager's job is to set each employee up for success every day., • We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together., • Performing arc and torch cutting and gouging., • Using generators, compressors, tuggers, blowers, grinders, and other power and air tools., • Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o’clock and “goat”/tractor)., • Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment., • Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment., • Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations., • Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment., • Operating forklifts, man lifts, boom lifts, and other large lifting equipment., • Knowledge of crane operations (including rigging and signaling), • Reading detailed erection and fabrication drawings., • Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks., • Completing job safety analysis, safety audits, site-specific training, and other safety training., • Follow directions and work professionally with other crew members. \, • Other duties as assigned. Requirements, • Have great communication and organization skills., • The ability to solve problems and suggest improvements to our systems., • Have excellent attendance and show up to work on time every day., • The willingness to learn., • Be at least 18 years old., • Be able to lift 50 lbs., • Have a high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background checks., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have a valid driver’s license., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Ability to weld is a plus. Benefits: • Competitive Pay with annual reviews, • Health, Dental and Vision insurance, • 401k with company match, • Great culture of teamwork, learning and development. 4uil16Erev

Job Description Overview Tradesmen International is looking to expand our team of qualified Trade Professionals for current & future projects in and around Pittsburgh, PA. These are mainly first shift opportunities with a pay range of $18-30/hour, dependent on experience & skill level. We are also offering Travel Opportunities for Welders in Wisconsin. Multiple locations throughout the state. Accepting novice to Journeyman skill levels. Hourly wage is BOE and Per Diem offered at all sites at $100 per day. If you are a Welder and want to work alongside other proven Craftsmen who emphasize safety, productivity and superior workmanship, this is your chance to advance your career! Job Scope: • MIG, TIG, Stick & Structural Welding, • Air Arc, • Flux Core, • Repair Welding, • Pipe & Mechanical, • Basic Tools for the Trade, • Proper PPE must be worn: Have your own Hood and Gloves/Leathers Qualifications Tradesmen International not only offers consistent work, top pay, and employment opportunities, we also provide a benefits package that is among the best in the industry. Our comprehensive benefits include: • Vacation Pay, • Health insurance, • 401(k) profit-sharing savings plan, • Incentive programs Click here to visit Tradesmen’s full website.

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods. Work Region: • Base Rate: Competitive and commensurate with experience. Non-union, non-prevailing wages. Pay periods are weekly. Direct deposit is available., • Schedule: Standard shop schedule is 4/10’s 6:00 a.m. – 4:00 p.m. Mondays through Thursdays (off Fridays – Sundays)., • Paid Time Off (PTO): Yes, • Paid Holidays: Yes, • Health: Yes, • Vision: Yes, • Dental: Yes, • Read blueprints and drawings and take or read measurements to plan layout and procedures., • Determine the appropriate welding equipment or method based on requirements., • Set up components for welding according to specifications and drawings., • Operate tools and equipment to prepare the parts that must be welded together., • Align components using jigs, clamps, calipers, rulers, and other devices., • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)., • Assist with repairing machinery or equipment as needed by welding pieces and filling gaps., • Perform certain non-destructive examination methods, including visual examination and vacuum box tests., • Ability to use a variety of welding tools and equipment, power or pneumatic tools, lifting equipment, non-power tools, generators, compressors, etc., • Maintain work area and equipment in a clean orderly condition and follow prescribed safety procedures., • Align, fit and tack steel shapes together utilizing temporary erection gear, fit-up gear, prybars, and sledgehammers., • Erect and dismantle temporary scaffolding on job sites if needed., • Perform basic safety checks and preventative maintenance functions on tools and equipment., • Inspect, set up, use, break down and rig equipment such as aerial work platforms, elevated work platforms, and staging on job sites if needed., • Use safety equipment, including hardhat, safety glasses with side shields, full body harness with double lanyard, earplugs, respiratory protection, gloves., • Be able to lift 50 lbs., • Be at least 18-years old., • Have high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background check., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have valid driver’s license and reliable, insured transportation., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Have good communication skills., • Have good attendance and show up to work on time every day., • Have strong basic math and measuring skills., • Be able to lift 50 lbs., • Be able to pass welding tests for stick and flux core., • Have an eye for quality and strong attention to detail., • Be self-motivated and eager to learn and improve. To Apply: If interested, complete the job application from our website at . We are an Equal Employment Opportunity employer. Powered by JazzHR LPEJ8ZU4CR

Job Description Summary As a welder at SMS Group you will be able to analyze the assignment and determine the most effective procedure. The welder assembles, fits, tacks, and welds a variety of complex fabrications and assemble. You must be able to work in a team environment, as well as solo on projects. The right candidate will possess written and verbal skills, reasoning, math and language skills, and be able to follow all safety protcol. . Who we are At SMS group, our people are our greatest asset. We offer an entrepreneurial environment that promotes a culture of innovation, growth, and inclusion. We offer company events, activities, and opportunities to participate in charitable initiatives that benefit the communities where we are located. What you’ll do Work from drawings, sketches, and a minimum of instruction. • Assemble parts in proper sequence, place bracing in correct location to minimize distortion., • Perform welding operations such as arc, MIG, TIG brazing and burning in all positions on a variety of metals., • Operate drill press to make parts for fabrication., • Utilize crane and material handling equipment., • Use precision measuring tools., • Follow instructions and established procedures., • Record measurements, record pertinent information as required., • High school diploma or GED preferred., • Read and interpret prints, including welding prints, • Weld per SMAW, GMAW, GTAW standards; vertical up, vertical down, and horizontal, • Plasma arc cutting, • Air carbon arc cutting, • Pipe bending, fitting, welding, and threading, • Use horizontal and vertical saws, torch, and cut off wheel, • Set up and operate all welding machines, be able to do basic troubleshooting, • Set up and operate all machines in the fabrication area, be able to do basic troubleshooting What we offer Competitive compensation, medical/dental/vision coverage, paid vacation, paid holiday time, 401k with a company match, training, a tuition reimbursement program and more! What we do SMS group is the leading partner in the world of metals. We are an original equipment supplier offering comprehensive maintenance and spare part services for metals production, continuous casting and rolling (flat and long products), tubes, welded pipes, forging, non-ferrous technology, and heat treatment plants - all from a single source. SMS group Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, religion, national origin, age, sexual orientation, disability, veteran status, gender identity or other categories protected by law. Employment is contingent upon successful completion of a drug screen and physical capacity profile test.

Job Description About PTS: Trusted, Responsive, and Nationwide Phillips Tank & Structure (PTS) is a growing, team-oriented, nationwide tank construction company with headquarters in Braddock, Pennsylvania, just outside of the City of Pittsburgh. We have over 190 employees and branch offices in Texas, California, Kentucky, and Hawaii. We specialize in designing, engineering, repairing, and constructing above-ground metal storage tanks and related structures, including welded tanks, bolted tanks, and geodesic domes. We have active projects in various industries, such as petroleum, power, chemical, and renewable fuels. At PTS, our commitment to our customers shapes everything we do. We have served companies across an array of industries, handling new tanks, repairs, and modifications. Our collective methodology, industry knowledge, and exhaustive range of abilities permit us to meet one-of-a-kind needs of our customers as they react to industry expectations. We believe in good quality and on-time delivery. We provide an excellent working relationship based on integrity and professionalism. Why Choose PTS? • Positive Work Culture: PTS employees experience a healthy blend of creativity, accountability, motivation, and improvement through team-based interactions with peers and other group members., • Professional Development: PTS is a growing company with many opportunities for advancement. PTS' systems-based approach to training and development helps employees quickly find the path to success in our company., • Service: The primary expectation for all employees at PTS is to focus on service. We are called to serve our customers as well as our co-workers and suppliers. We endeavor to build a cohesive team of employees who care about the well-being of the group., • Planning and Problem Solving: Planning and problem solving should be utilized to achieve productivity. We will strive every day to be organized and efficient in our approach. We will always look for better ways to achieve results rather than propagating inefficient or inaccurate methods. Work Region: • Base Rate: Competitive and commensurate with experience. Non-union, non-prevailing wages. Pay periods are weekly. Direct deposit is available., • Schedule: Standard shop schedule is 4/10’s 6:00 a.m. – 4:00 p.m. Mondays through Thursdays (off Fridays – Sundays)., • Paid Time Off (PTO): Yes, • Paid Holidays: Yes, • Health: Yes, • Vision: Yes, • Dental: Yes, • Read blueprints and drawings and take or read measurements to plan layout and procedures., • Determine the appropriate welding equipment or method based on requirements., • Set up components for welding according to specifications and drawings., • Operate tools and equipment to prepare the parts that must be welded together., • Align components using jigs, clamps, calipers, rulers, and other devices., • Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal or overhead)., • Assist with repairing machinery or equipment as needed by welding pieces and filling gaps., • Perform certain non-destructive examination methods, including visual examination and vacuum box tests., • Ability to use a variety of welding tools and equipment, power or pneumatic tools, lifting equipment, non-power tools, generators, compressors, etc., • Maintain work area and equipment in a clean orderly condition and follow prescribed safety procedures., • Align, fit and tack steel shapes together utilizing temporary erection gear, fit-up gear, prybars, and sledgehammers., • Erect and dismantle temporary scaffolding on job sites if needed., • Perform basic safety checks and preventative maintenance functions on tools and equipment., • Inspect, set up, use, break down and rig equipment such as aerial work platforms, elevated work platforms, and staging on job sites if needed., • Use safety equipment, including hardhat, safety glasses with side shields, full body harness with double lanyard, earplugs, respiratory protection, gloves., • Be able to lift 50 lbs., • Be at least 18-years old., • Have high school diploma or equivalent., • Be eligible to work in the United States., • Be willing to authorize background check., • Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism., • Have valid driver’s license and reliable, insured transportation., • Be willing to authorize motor vehicle driving record checks., • Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing., • Have good communication skills., • Have good attendance and show up to work on time every day., • Have strong basic math and measuring skills., • Be able to lift 50 lbs., • Be able to pass welding tests for stick and flux core., • Have an eye for quality and strong attention to detail., • Be self-motivated and eager to learn and improve. To Apply: If interested, complete the job application from our website at . We are an Equal Employment Opportunity employer. Powered by JazzHR 5P6U39IE5s

Calgon Carbon | A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Position: ASME Welder Location: Equipment and Assembly Facility - Pittsburgh, PA $28.78 to start with a wage step progression plan Eligibility to receive a$1,000 new hire retention bonus ($500 payment at hire and an additional $500 payment after successfully completing 6-months of employment) Tool Allowance Program: New employees hired as a Welder II will be offered a 30-day period following their hire date to submit a one-time reimbursement up to $250for the purchase of tools Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) - Generous Company Match! Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hour of work: Schedule flexibility to work in rotating shifts - Must be able to work a 3 shift rotation Under the supervision of the E&A supervisor or group leader, the technician will perform all functions under this job description. This includes all necessary functions to maintain a clean and safe shop. Complies with all Company and Safety Policies and procedures in the performance of assigned duties. Welds all vessels (including large ASME) and structural components utilizing SMAW, FCAW, SAW, GTAW and GMAW welding processes. Performs these procedures to meet CCC certified procedures. (These may include ASME, API, AWS, and ANSI code certification.) Materials may include carbon steel, stainless steel and various other nickel-based alloys. Duties and Responsibilities (not limited to) \n • Able to pass non-destructive testing of pressure retaining welds, on both pipe and vessels\n, • Works from drawings/sketches to determine weld size, weld location and weld process\n, • Inspects own work to ensure compliance to drawings and weld procedures and makes necessary repairs\n, • Assist with incoming parts inspection and final product inspection and complete appropriate documentation\n, • Operate Fork trucks, jib cranes and overhead crane\n, • Complete ASME code weld log documentation daily\n, • Comply with company policies\n, • Material handling/movement \n, • Welding\n, • A High School diploma or Trade School certification is required \n, • Capability to obtain ASME section 9 in GTAW, GMAW, and FCAW certification while Employed\n, • \n2 yearsof experience welding on pressure vessels and FCAW welding process is required \n At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

Job Description Skillforce is currently hiring Structural Welders for a 3-month project in Grantsville, MD. This opportunity offers $26–$32 per hour, working 50–60 hours per week, with 1st and 2nd shift options available. Per diem is offered for those who qualify! Structural Welders will complete welds on fabricated parts, ensuring proper alignment and fit-up prior to welding, and performing both visual and X-ray quality welds to meet production and quality standards. Key Responsibilities: * Read and interpret blueprints, drawings, and fabrication plans * Fit, assemble, and prepare structural steel components for welding * Perform high-quality welds (visual and X-ray tested) on fabricated parts * Verify dimensions and tolerances to ensure accuracy * Maintain a safe and clean work environment * Work collaboratively with team members to meet deadlines and quality expectations Requirements: * Proven experience as a Structural Welder * Ability to read and interpret blueprints and shop drawings * Must provide welding hood and welding gloves * Must pass visual and X-ray weld tests * Must pass all pre-employment screenings (including drug test and background check) * Reliable transportation and strong work ethic Benefits: • 401(k), • Dental insurance, • Health insurance, • Paid time off, • Referral program, • Vision insurance If you are a skilled Structural Welder looking for work, apply today!

Job Description Distribution Technician The Distribution Mechanic is responsible for the safe maintenance, service and repair of the Distribution System. That responsibility will take the form of specific duties to be performed regularly at specific times during the eight (8) hour daylight shift, and other duties that may be assigned from time to time. The Distribution Mechanic is responsible for reporting his or her activities and observations regarding the condition of the Distribution System to the Distribution Lead and completing any required written record(s). The Distribution Mechanic shall also perform duties within the plant or at remote locations at the direction of any of the Leads. In addition, it is the responsibility of the Distribution Mechanic to be responsive to any and all requests made by the Operator in the performance of his or her job in operating the plant. The Distribution Mechanic reports to the Distribution Manager for work duties, and day-to-day assignments; to the Operations, Maintenance, or the I&C Leads as required; to the Operator for specific instructions relating to the operation of the Plant; and for all other matters to the Distribution Manager. The Distribution Mechanic works an 8-hour daylight shift as scheduled by the Plant Superintendent and is paid according to the Union (International Union of Operating Engineers Affiliated with AFL-CIO Local No. 95-95A) contract then in effect. The following list of duties is not all inclusive and is meant to serve as a guide for the scope of work to be carried out by the Distribution Mechanic • Be familiar with and utilize all Clearway safety procedures as appropriate to the work being accomplished, • Carry-out safety responsibilities as assigned (e.g. Key Safety Issues), • Inspect and maintain the Distribution System by making regular visits to all vaults., • Diagnose source(s) of trouble with valves, fittings and pipes, and perform proper repair/replacement procedures, • Prepare (set up) all Distribution System worksites for safe and efficient work, • Properly perform LOTO procedures in isolating and de-energizing equipment and systems that are to be worked on, identify and eliminate or report unsafe conditions in the Distribution System, and perform all tasks in a safety conscious manner, • Adjust, repair, overhaul, and rebuild Distribution System components as required, • Respond to Operator requests as required, • Become proficient in the safe operation all vehicles, • Provision and care for all tools, equipment, parts, and materials required in the service truck, • Perform welding, cutting, brazing, and pipefitting tasks as directed or required throughout the plant, • High school education, • Mechanical aptitude and skill set as evaluated by the Distribution Lead, • Sufficient physical attributes to be able to perform the rigors of working in hot (with exposure to and working around temperatures that can reach 120ºF) and cold locations, to work in confined spaces, to have the ability to work on ladders, to go up and down those ladders frequently, to be able to lift up to 75 lbs, and to be able to work on feet for numbers of consecutive hours, • High school education, • Certified Welder, • Minimum of 3 years of experience operating water tube steam boilers (100 psig or greater) HV8JsBG3hO

Job Description JENNMAR Services, a well-respected industrial construction/maintenance company, is currently seeking Experienced Millwrights, Welders and Fabricators for Travel Work. Quality and service are the core principles of our company and we prioritize excellent relationships with our clients. THESE POSITIONS ARE BOTH FULL TIME TRAVEL POSITIONS WITH COMPETITIVE PAY, BENEFITS AND PERDIEM AND LOCAL POSITIONS MUST BE ABLE TO TRAVEL EACH WEEK TO VARIOUS LOCATIONS Benefits for Experienced Millwrights, Welders, Fabricators: • Perdiem/hotel, • Health, Dental, Vision, • Paid Time Off, • Follow instructions from supervisors and/or crew foremen while maintaining all safety standards, • Perform various physical duties assigned, • Move, secure, install, build, load and/or unload materials, tools and equipment, • Welding and fabrication for repairs and install of plant equipment, chutes and crushers, • Properly repair and install mechanical parts for equipment, • Read schematics and instruction manuals to make equipment repairs if needed, • Stick Weld and use Oxy/Act torches safely and efficiently, • Use hand tools and power tools safely and efficiently, • Clean/prepare job site, • Assist skilled tradespeople in their duties, • Must be 18 or older, • Ability to routinely climb stairs, ladders and/or platforms, bend and squat, • Ability to walk, stand or sit for prolonged periods of time, • Ability to consistently lift and/or move up to 50 pounds throughout the shift, • Able to work any shifts, including overtime, weekends and holidays required., • Ability to pass background and drug & alcohol testing required., • MSHA Surface and Underground certifications a plus JENNMAR Services, our employees are our most important assets and is committed to them with competitive pay and a comprehensive benefits plan, including 401(k). We are consistently employing individuals in the Coal, Oil & Gas, Construction, Manufacturing and Industrial industries.

Job Description Responsibilities: • Conduct inspections and quality assessments of welding activities in accordance with project specifications and industry standards., • Verify welding procedures, materials, and equipment used for compliance with approved specifications and regulatory requirements, • Monitor and evaluate welder qualifications and performance to maintain consistent quality in welding operations, • Conduct visual, dimensional, and non-destructive testing (NDT) as required to assess weld quality and integrity., • Prepare detailed inspection reports documenting weld quality, non-conformances, and corrective actions taken., • Participate in weld procedure qualification and welding performance qualification tests as part of project quality assurance.Technical Qualifications and Certifications:, • 5 years' experience as a Welding Inspector, • Certifications needed are API, AWS, CWI, NDT, • Welding Inspector (Oil and Gas) - Conduct inspections and quality assessments of welding activities in accordance with project specifications and industry standards such as ASME, API, Aramco, and AWS to ensure adherence to quality and safety protocols.Industry Experience:, • 5 years of experience in welding inspection within the oil and gas industry, with a strong understanding of welding processes and procedures., • Proficiency in interpreting welding symbols, blueprints, and technical drawings, • Thorough knowledge of welding codes and standards, • Strong attention to detail and analytical skills for accurate inspection and assessment of weld qualityContract Type: 1099 contract (Part Time) Shift Hours: Flexible, dependent on the project. May include full-day shifts or partial-day inspections based on project needs. Work Location: Pittsburg, PA.

Shift: Monday-Thursday 5:00AM-3:30PM, OT not mandatory, but available. Stainless Steel welding experience preferred Welder Summary: Years of Experience: 3 to 5 years Stainless Steel welding experience preferred. Welder Purpose of Job: POSSIBLE - Temp to Perm Position Summary: Candidate must be able to perform the qualified welds with a high degree of quality and efficiency on TTC products. GMAW short arc experience and stainless-steel experience a plus. Candidate must successfully complete and pass the following tests prior to considerations: o FCAW 3G CS Open Root vertical up o GMAW 3G CS open root vertical down This role will report directly to Shop Supervisor Duties and Responsibilities: Exhibit safe work habits adhering to all safety procedures, PPE, and OSHA requirements for assigned area. Must report to work at scheduled time every day Be in your work area and prepared to begin work at the start of your shift Must maintain housekeeping in your work area and throughout the building. Be sure all tools and equipment are returned at the end of your shift to maintain a clean and safe working environment for all. Uses all company owned methods of operating machinery, i.e., forklifts/trucks, jib cranes, overhead cranes, etc., and must be willing to train and adapt to new systems. Can perform as an Operator/Laborer as needed and has the ability to transition in and out of various positions as required by the company. Other duties as assigned Must fill out job travelers, dimensional verifications and Weld identifications as required. Minimum Qualifications: (To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.) High School diploma or GED required. Trade school certificate preferred 3 or more years related experience required. Ability to read and interpret blueprints and follow work instructions. Ability to weld product in accordance with customer or company drawings and specifications. Knowledge of basic measuring tools such as calipers and tape measure Self-motivated Ability to comprehend, speak and write the English language Must be detail oriented and take ownership of work Ability be able to pass the required weld test and show efficiency when performing on TTC products Communication skills to interact with all levels of the organization Knowledge, Skills and Abilities: Ability to work with minimal supervision. Ability to work in a fast-paced environment and expedite parts as needed. Ability to layout material is a plus Ability to work well on a team Ability to maintain a clean work environment Ability to use hand tools such as grinder, sanders, etc. Ability to meet production deadlines Ability to maintain attendance as defined by the company policy. Ability to work multiple shifts if needed. Physical Demands: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.) Employee is regularly required to talk and hear. Employee is regularly required to stand, bend, climb, lift, stoop, and walk for 5 hours at a time, without breaks. Employee is regularly required to lift and/or move up to 25 pounds, and occasionally lift and/or move 50 pounds. Employee must have the ability to work with their hands to lift and weld product including reaching overhead. Employee must have the ability to occasionally kneel, push and pull. Employee is regularly required to walk for up to 10 hours a day. Employee is required to wear safety shoes, hearing protection, and safety glasses at all times. Employee is required to be on site during scheduled shift to perform daily duties and responsibilities. Requires daily face-to-face interaction with co-workers on production floor. Employee may be required to work in confined spaces and or heights. Work Environment: (The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.) The employee will normally work on the production floor and may be exposed to extreme cold or hot weather conditions. May occasionally be exposed to fumes or airborne particles, and loud noise.

Job DescriptionOVERVIEW: • Responsible for overseeing worksite operations and crew as an assistant to the Operations Manager, completing high quality railcar repairs, modifications and upgrades in a safe and timely manner and according to customer and regulatory guidelines., • Customer Service – Ensure quality repairs are made on a timely basis to reduce out-of-service time for the equipment of host railroads and other customers., • Safety – Ensure every task is approached proactively with potential risks and safety always in mind and the proper PPE is utilized without exception while on the job., • Quality – Ensure quality work is completed that is compliant with both customer and regulatory requirements.ESSENTIAL FUNCTIONS OF POSITION:, • Management has the discretion to change or modify the duties and essential functions at any time in accordance with operating needs., • Frequency of essential functions, marginal functions, machine/equipment/tools used, physical requirements, and working conditions may change due to the type or railcar, weather, and location operating restrictions., • Oversee worksite operations and crew as an assistant to the Operations Manager., • Interact directly with railroad leadership to coordinate railcar locations and work activities of the crew when Operations Manager delegates., • Oversee day-to-day compliance with safety procedures when Operations Manager delegates., • Analyze complex problems and determine appropriate steps to make repairs within regulatory and customer guidelines., • Repair, modify, upgrade and clean railcars according to blueprints and other specifications using hand tools, power tools and precision measuring instruments., • Rebuild railcar components: bolsters, side framers, hitch heads, and box car doors using hand tools and power tools and precision measuring instruments., • Assemble subassemblies, major components and equipment. Check function to test for proper operation., • Measure, cut and thread pipes. Replace air lines using hand tools., • Move, align and set parts in place using a forklift or bobcat., • Repair broken parts using hand tools and welding equipment., • Drive company truck or vehicle to run errands or travel to another worksite., • Purchase supplies with company credit card while following company guidelines for use.SPECIAL SKILLS:, • Leadership, • Basic mechanical skills, • Forklift certified, • Certified welder, • Air-test certified, • Keyboarding, • basic computer skills, • Microsoft Office, • Railcar Repair experienceMARGINAL FUNCTIONS:, • Provides estimates to customers when Operations Manager delegates., • Enters car repair / billing information via electronic keyboard system when Operations Manager delegates., • Retrieve information needed to respond to audit activities., • Maintain a clean work environment. This includes any shop or administrative space and company vehicles., • All other duties as assigned by Operations Manager.MACHINE/EQUIPMENT/TOOLS USED:, • Impact wrenches; electric grinders; hydraulic jacks; forklifts; and mobile trucks., • Various styles of welders (Stick and MIG)., • Cutting torch used for cutting frequently; heating torch used while bending regularly; side grinder used for grinding regularly; hoist used for lifting regularly; winch used for pulling regularly.DESIRED COMPETENCIES:, • Leadership, • Analytical Skills, • Anticipation of Problems, • Quality-Focused, • Customer-Focused, • Safety-Focused, • Working Effectively with Others, • Functioning Without Supervision, • Using Sound JudgementQUALIFICATIONS AND EDUCATION REQUIREMENTS:, • Relevant experience in the industry., • Must hold a valid driver’s license., • Basic mathematical skills to include addition, subtraction, fractions and units of measure, • Reading comprehension to include reading blueprints, technical manuals and regulatory guidelines.PHYSICAL REQUIREMENTS:, • Must be able to pass a Department of Transportation (DOT) physical., • Physical abilities (approximate times - vary slightly by location)., • Must be able to complete these requirements with or without accommodation., • Standing, hearing, seeing and talking for 8 to 10 hours; Handling for 3 to 6 hours; Walking, stooping, kneeling, crouching, crawling, reaching with hands and arms, stretching, using fingers to feel for 3 to 6 hours; Reaching below the waist, twisting and feeling for up to 2 hours; Climbing or balancing up to 3 hours; Sitting up to 3 hours., • Lifting: Car parts from 1-80 lbs. throughout the day - lifting 10-25 lbs. frequently; 25-50 lbs. regularly; over 50 lbs. occasionally. Wrenches weighing up to 10 lbs. to tighten bolts occasionally - 4 hours., • Pulling: 10-25 lbs. frequently; 25-50 lbs. regularly; over 50 lbs. occasionally., • Environment: Must be able to work in - Outdoor weather conditions; non-weather related hot or cold conditions in small spaces; areas with fumes and airborne particles; worksites with mechanical vibrations, and loud, noisy machines and tools., • Proper PPE and safety procedures required.

Calgon Carbon | A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Position: ASME Welder Location: Equipment and Assembly Facility - Pittsburgh, PA $28.78 to start with a wage step progression plan Eligibility to receive a$1,000 new hire retention bonus ($500 payment at hire and an additional $500 payment after successfully completing 6-months of employment) Tool Allowance Program: New employees hired as a Welder II will be offered a 30-day period following their hire date to submit a one-time reimbursement up to $250for the purchase of tools Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) - Generous Company Match! Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hour of work: Schedule flexibility to work in rotating shifts - Must be able to work a 3 shift rotation Under the supervision of the E&A supervisor or group leader, the technician will perform all functions under this job description. This includes all necessary functions to maintain a clean and safe shop. Complies with all Company and Safety Policies and procedures in the performance of assigned duties. Welds all vessels (including large ASME) and structural components utilizing SMAW, FCAW, SAW, GTAW and GMAW welding processes. Performs these procedures to meet CCC certified procedures. (These may include ASME, API, AWS, and ANSI code certification.) Materials may include carbon steel, stainless steel and various other nickel-based alloys. Duties and Responsibilities (not limited to) \n • Able to pass non-destructive testing of pressure retaining welds, on both pipe and vessels\n, • Works from drawings/sketches to determine weld size, weld location and weld process\n, • Inspects own work to ensure compliance to drawings and weld procedures and makes necessary repairs\n, • Assist with incoming parts inspection and final product inspection and complete appropriate documentation\n, • Operate Fork trucks, jib cranes and overhead crane\n, • Complete ASME code weld log documentation daily\n, • Comply with company policies\n, • Material handling/movement \n, • Welding\n, • A High School diploma or Trade School certification is required \n, • Capability to obtain ASME section 9 in GTAW, GMAW, and FCAW certification while Employed\n, • \n2 yearsof experience welding on pressure vessels and FCAW welding process is required \n At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

Welder Flux-Cored Arc Welding: The Welder must be qualified on multiple weld processes to include FCAW in horizontal, vertical, and overhead positions. This position will perform the highest quality of welding on carbon and stainless steel on all types of products and materials using various types of automatic, semi-automatic or manual welding equipment. (Competitive Pay + Shift Differential) Essential Job Functions: \n • Perform work in a safe manner and follow all safety regulations including wearing all required personal protection equipment (PPE) producing high quality work.\n, • Prepare materials for welding, fit the components, and perform welding process per drawing specification.\n, • Weld components in all positions consistent with quality requirements.\n, • Layout, position, align, fit, clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required preparation, configuration and/or position for welding. \n, • Work from drawings, work orders, supervisor's instructions, weld procedure specifications (WPS) and Holtec standard operating procedures for welding using American Welding Society (AWS) symbols.\n, • Monitor the fitting, burning, and welding process to avoid overheating of parts.\n, • Use tools of measurement for checking dimensions of parts, work to tolerances.\n, • Visually examine welds for quality.\n, • Operate hand and power tools common to the welding trade.\n, • Handle materials as needed by hand, overhead crane, forklift, and other material handling equipment.\n, • Maintain work area in safe, clean, and orderly condition. \n, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. \n, • While performing the duties of this job, the associate is regularly required to talk and hear, and stand for long periods of time. The associate is frequently required to stand, walk, climb, balance, stoop, kneel, crouch, reach, push, pull, lift, grasp, feel, and use repetitive motion. The associate may be exposed to adverse environmental conditions, such as in a typical warehouse or external loading areas.\n, • High school degree or equivalent required.\n, • Ability to perform multiple weld processes (FCAW, submerged arc) that pass visual examination and x-ray testing. (Manual welding testing requires successfully passing horizontal, vertical, and overhead position requirements.)\n, • Ability to read blueprints and transfer blueprint information to material.\n, • Minimum of 2-4 years welding in heavy plate manufacturing required.\n, • **MUST pass 2G and 3G FCAW weld tests\n

Advantage xPO - JobID: 1939125 [Fabricator] As a Welder at Advantage xPO, you'll: Set up, operate, and maintain MIG welding equipment; Accurately read linear measuring devices; Weld around various shaft diameters, flat, vertical fillet, and lap joints of 7 Ga.

Advantage xPO - JobID: 1950829 [Fabricator] As a Welder at Advantage xPO, you'll: Set up, operate, and maintain MIG welding equipment; Accurately read linear measuring devices; Weld around various shaft diameters, flat, vertical fillet, and lap joints of 7 Ga.

Calgon Carbon | A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Position: ASME Welder Location: Equipment and Assembly Facility - Pittsburgh, PA $28.78 to start with a wage step progression plan Eligibility to receive a$1,000 new hire retention bonus ($500 payment at hire and an additional $500 payment after successfully completing 6-months of employment) Tool Allowance Program: New employees hired as a Welder II will be offered a 30-day period following their hire date to submit a one-time reimbursement up to $250for the purchase of tools Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) - Generous Company Match! Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hour of work: Schedule flexibility to work in rotating shifts - Must be able to work a 3 shift rotation Under the supervision of the E&A supervisor or group leader, the technician will perform all functions under this job description. This includes all necessary functions to maintain a clean and safe shop. Complies with all Company and Safety Policies and procedures in the performance of assigned duties. Welds all vessels (including large ASME) and structural components utilizing SMAW, FCAW, SAW, GTAW and GMAW welding processes. Performs these procedures to meet CCC certified procedures. (These may include ASME, API, AWS, and ANSI code certification.) Materials may include carbon steel, stainless steel and various other nickel-based alloys. Duties and Responsibilities (not limited to) \n • Able to pass non-destructive testing of pressure retaining welds, on both pipe and vessels\n, • Works from drawings/sketches to determine weld size, weld location and weld process\n, • Inspects own work to ensure compliance to drawings and weld procedures and makes necessary repairs\n, • Assist with incoming parts inspection and final product inspection and complete appropriate documentation\n, • Operate Fork trucks, jib cranes and overhead crane\n, • Complete ASME code weld log documentation daily\n, • Comply with company policies\n, • Material handling/movement \n, • Welding\n, • A High School diploma or Trade School certification is required \n, • Capability to obtain ASME section 9 in GTAW, GMAW, and FCAW certification while Employed\n, • \n2 yearsof experience welding on pressure vessels and FCAW welding process is required \n At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

Advantage xPO - JobID: 1938375 [Fabricator] As a Welder at Advantage xPO, you'll: Set up, operate, and maintain MIG welding equipment; Accurately read linear measuring devices; Weld around various shaft diameters, flat, vertical fillet, and lap joints of 7 Ga.

About The Position Safe Fleet a leader in the truck equipment manufacturing industry, is looking for an Fabricator/Welder to work as part of a team fabricating, installing and repairing Automated Tarp Systems. We are looking for a mechanical Fabricator/Welder. This full-time position is responsible for on premises tarp system fabricating, repair and installation for the trucking industry. The qualified candidate must be a high energy, physical individual with experience working on triaxle truck bodies and semi-trailers in a fast paced, labor intensive environment. This individual will need to be motivated by a competitive industry and be results, detail and team-oriented. ESSENTIAL DUTIES AND RESPONSIBILITIES: \n • Fabricates steel and other metal parts as indicated by the work order and blueprints.\n, • Maneuver fabrication machines, such as grinders, drill presses, brakes, rolls, shears, and flame cutters to cut, grind, and adjust material.\n, • Sets up and operates gas welding machines to weld metal parts according to work orders, blueprint layouts and verbal instructions.\n, • Regulates flow of gases for proper mixture.\n, • Cleans parts to remove contamination prior to welding\n, • Set up and operates all phases of brazing applications using clamps, fixtures and torches working to specified tolerances.\n, • Selects proper flux\n, • Sets up and operates stick welding machines to repair, join or fabricate parts working with blueprints, sketches or verbal instructions.\n, • Must be detail oriented and eager to work\n, • Must be able to balance numerous tasks with efficiency tolerance for stress and resiliency\n, • Flexibility while having a respect for adherence to processes\n, • Quick and accurate thinker...problem solver with a sense of urgency\n, • Manual dexterity\n, • Able to learn on the fly\n, • High school education or equivalent\n, • 1 year of welding experience preferred\n, • Certification preferred but not required\n\n PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and depth perception. While performing the duties of this job, the employee is regularly required to use hands and reach with hands and arms. The employee is frequently required to stand; walk; stoop, kneel, crouch, bend, or twist, and talk or hear. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. Working environment is a climate-controlled manufacturing/warehouse facility. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is occasionally loud. At Safe Fleet, you are empowered to build a career that will take you where you want to go. You'll enjoy the freedom to explore new projects, the support to think outside the box and the tools necessary to achieve personal success. We offer a comprehensive compensation package, including Medical, Dental, Vision, Paid Holidays, 401K match and much more. We're a background check and pre-hire drug screen company where allowed by law. NOTE: Safe Fleet does not discriminate in hiring or employment on the basis of race, color, religion, gender, marital status, national origin, sexual orientation, age, disability, ancestry veteran status or any other status protected by law.

Position: Welder (FCAW & GTAW) Location: East Pittsburgh, PA; Holtec Manufacturing Division Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for the nuclear, energy, and heavy industrial sectors. Ideal candidates will have hands-on experience in multiple welding positions and processes and a strong commitment to quality, safety, and precision in a heavy-plate manufacturing environment. The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic, semi-automatic, and manual welding equipment. Welders are expected to follow technical drawings and specifications to ensure that all work meets Holtec's rigorous quality standards. Minimum required qualifications include: High School diploma or GED required. Minimum of 2-4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices. Additional desirable qualifications: Previous certification to ASME Section IX and/or AWS D1.1/D1.6. Experience in nuclear or high-spec industrial fabrication environments. Multi-process welding experience (e.g., SMAW, GMAW, SAW) is a plus. Familiarity with digital weld documentation and inspection tools. Specific Areas of Responsibility: Perform all work in a safe manner in compliance with Holtec's safety policies and wear appropriate personal protective equipment (PPE) at all times. Prepare, position, align, and fit materials for welding based on engineering drawings, work orders, and WPS (Weld Procedure Specifications). Execute welding operations in all required positions, ensuring high-quality welds that meet visual and X-ray inspection standards. Use tools of measurement and layout techniques to confirm part dimensions and tolerances. Layout, tack weld, heat-bend, clamp, grind, and bolt components to ensure accurate preparation and alignment prior to welding. Monitor the fitting, burning, and welding process to avoid material distortion or overheating. Visually inspect welds for defects, ensuring adherence to AWS and Holtec quality standards. Operate a range of welding equipment (manual, semi-automatic, and automatic), including GTAW, FCAW, SAW, and plasma arc. Safely handle materials and parts using overhead cranes, forklifts, and other material handling equipment. Maintain a clean, safe, and organized work area in compliance with housekeeping and safety standards. *Must pass pre-employment weld tests administered in accordance with Holtec's WPS requirements. May be required to work overtime, nights, weekends, or travel based on production needs. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references.

About The Position Safe Fleet a leader in the truck equipment manufacturing industry, is looking for an Fabricator/Welder to work as part of a team fabricating, installing and repairing Automated Tarp Systems. We are looking for a mechanical Fabricator/Welder. This full-time position is responsible for on premises tarp system fabricating, repair and installation for the trucking industry. The qualified candidate must be a high energy, physical individual with experience working on triaxle truck bodies and semi-trailers in a fast paced, labor intensive environment. This individual will need to be motivated by a competitive industry and be results, detail and team-oriented. ESSENTIAL DUTIES AND RESPONSIBILITIES: \n • Fabricates steel and other metal parts as indicated by the work order and blueprints.\n, • Maneuver fabrication machines, such as grinders, drill presses, brakes, rolls, shears, and flame cutters to cut, grind, and adjust material.\n, • Sets up and operates gas welding machines to weld metal parts according to work orders, blueprint layouts and verbal instructions.\n, • Regulates flow of gases for proper mixture.\n, • Cleans parts to remove contamination prior to welding\n, • Set up and operates all phases of brazing applications using clamps, fixtures and torches working to specified tolerances.\n, • Selects proper flux\n, • Sets up and operates stick welding machines to repair, join or fabricate parts working with blueprints, sketches or verbal instructions.\n, • Must be detail oriented and eager to work\n, • Must be able to balance numerous tasks with efficiency tolerance for stress and resiliency\n, • Flexibility while having a respect for adherence to processes\n, • Quick and accurate thinker...problem solver with a sense of urgency\n, • Manual dexterity\n, • Able to learn on the fly\n, • High school education or equivalent\n, • 1 year of welding experience preferred\n, • Certification preferred but not required\n\n PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and depth perception. While performing the duties of this job, the employee is regularly required to use hands and reach with hands and arms. The employee is frequently required to stand; walk; stoop, kneel, crouch, bend, or twist, and talk or hear. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. Working environment is a climate-controlled manufacturing/warehouse facility. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is occasionally loud. At Safe Fleet, you are empowered to build a career that will take you where you want to go. You'll enjoy the freedom to explore new projects, the support to think outside the box and the tools necessary to achieve personal success. We offer a comprehensive compensation package, including Medical, Dental, Vision, Paid Holidays, 401K match and much more. We're a background check and pre-hire drug screen company where allowed by law. NOTE: Safe Fleet does not discriminate in hiring or employment on the basis of race, color, religion, gender, marital status, national origin, sexual orientation, age, disability, ancestry veteran status or any other status protected by law.

Welder Flux-Cored Arc Welding: The Welder must be qualified on multiple weld processes to include FCAW in horizontal, vertical, and overhead positions. This position will perform the highest quality of welding on carbon and stainless steel on all types of products and materials using various types of automatic, semi-automatic or manual welding equipment. (Competitive Pay + Shift Differential) Essential Job Functions: \n • Perform work in a safe manner and follow all safety regulations including wearing all required personal protection equipment (PPE) producing high quality work.\n, • Prepare materials for welding, fit the components, and perform welding process per drawing specification.\n, • Weld components in all positions consistent with quality requirements.\n, • Layout, position, align, fit, clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required preparation, configuration and/or position for welding. \n, • Work from drawings, work orders, supervisor's instructions, weld procedure specifications (WPS) and Holtec standard operating procedures for welding using American Welding Society (AWS) symbols.\n, • Monitor the fitting, burning, and welding process to avoid overheating of parts.\n, • Use tools of measurement for checking dimensions of parts, work to tolerances.\n, • Visually examine welds for quality.\n, • Operate hand and power tools common to the welding trade.\n, • Handle materials as needed by hand, overhead crane, forklift, and other material handling equipment.\n, • Maintain work area in safe, clean, and orderly condition. \n, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. \n, • While performing the duties of this job, the associate is regularly required to talk and hear, and stand for long periods of time. The associate is frequently required to stand, walk, climb, balance, stoop, kneel, crouch, reach, push, pull, lift, grasp, feel, and use repetitive motion. The associate may be exposed to adverse environmental conditions, such as in a typical warehouse or external loading areas.\n, • High school degree or equivalent required.\n, • Ability to perform multiple weld processes (FCAW, submerged arc) that pass visual examination and x-ray testing. (Manual welding testing requires successfully passing horizontal, vertical, and overhead position requirements.)\n, • Ability to read blueprints and transfer blueprint information to material.\n, • Minimum of 2-4 years welding in heavy plate manufacturing required.\n, • **MUST pass 2G and 3G FCAW weld tests\n

About The Position Safe Fleet a leader in the truck equipment manufacturing industry, is looking for an Fabricator/Welder to work as part of a team fabricating, installing and repairing Automated Tarp Systems. We are looking for a mechanical Fabricator/Welder. This full-time position is responsible for on premises tarp system fabricating, repair and installation for the trucking industry. The qualified candidate must be a high energy, physical individual with experience working on triaxle truck bodies and semi-trailers in a fast paced, labor intensive environment. This individual will need to be motivated by a competitive industry and be results, detail and team-oriented. ESSENTIAL DUTIES AND RESPONSIBILITIES: \n • Fabricates steel and other metal parts as indicated by the work order and blueprints.\n, • Maneuver fabrication machines, such as grinders, drill presses, brakes, rolls, shears, and flame cutters to cut, grind, and adjust material.\n, • Sets up and operates gas welding machines to weld metal parts according to work orders, blueprint layouts and verbal instructions.\n, • Regulates flow of gases for proper mixture.\n, • Cleans parts to remove contamination prior to welding\n, • Set up and operates all phases of brazing applications using clamps, fixtures and torches working to specified tolerances.\n, • Selects proper flux\n, • Sets up and operates stick welding machines to repair, join or fabricate parts working with blueprints, sketches or verbal instructions.\n, • Must be detail oriented and eager to work\n, • Must be able to balance numerous tasks with efficiency tolerance for stress and resiliency\n, • Flexibility while having a respect for adherence to processes\n, • Quick and accurate thinker...problem solver with a sense of urgency\n, • Manual dexterity\n, • Able to learn on the fly\n, • High school education or equivalent\n, • 1 year of welding experience preferred\n, • Certification preferred but not required\n\n PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and depth perception. While performing the duties of this job, the employee is regularly required to use hands and reach with hands and arms. The employee is frequently required to stand; walk; stoop, kneel, crouch, bend, or twist, and talk or hear. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. Working environment is a climate-controlled manufacturing/warehouse facility. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is occasionally loud. At Safe Fleet, you are empowered to build a career that will take you where you want to go. You'll enjoy the freedom to explore new projects, the support to think outside the box and the tools necessary to achieve personal success. We offer a comprehensive compensation package, including Medical, Dental, Vision, Paid Holidays, 401K match and much more. We're a background check and pre-hire drug screen company where allowed by law. NOTE: Safe Fleet does not discriminate in hiring or employment on the basis of race, color, religion, gender, marital status, national origin, sexual orientation, age, disability, ancestry veteran status or any other status protected by law.

Position: Welder (FCAW & GTAW) Location: East Pittsburgh, PA; Holtec Manufacturing Division Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for the nuclear, energy, and heavy industrial sectors. Ideal candidates will have hands-on experience in multiple welding positions and processes and a strong commitment to quality, safety, and precision in a heavy-plate manufacturing environment. The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic, semi-automatic, and manual welding equipment. Welders are expected to follow technical drawings and specifications to ensure that all work meets Holtec's rigorous quality standards. Minimum required qualifications include: High School diploma or GED required. Minimum of 2-4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices. Additional desirable qualifications: Previous certification to ASME Section IX and/or AWS D1.1/D1.6. Experience in nuclear or high-spec industrial fabrication environments. Multi-process welding experience (e.g., SMAW, GMAW, SAW) is a plus. Familiarity with digital weld documentation and inspection tools. Specific Areas of Responsibility: Perform all work in a safe manner in compliance with Holtec's safety policies and wear appropriate personal protective equipment (PPE) at all times. Prepare, position, align, and fit materials for welding based on engineering drawings, work orders, and WPS (Weld Procedure Specifications). Execute welding operations in all required positions, ensuring high-quality welds that meet visual and X-ray inspection standards. Use tools of measurement and layout techniques to confirm part dimensions and tolerances. Layout, tack weld, heat-bend, clamp, grind, and bolt components to ensure accurate preparation and alignment prior to welding. Monitor the fitting, burning, and welding process to avoid material distortion or overheating. Visually inspect welds for defects, ensuring adherence to AWS and Holtec quality standards. Operate a range of welding equipment (manual, semi-automatic, and automatic), including GTAW, FCAW, SAW, and plasma arc. Safely handle materials and parts using overhead cranes, forklifts, and other material handling equipment. Maintain a clean, safe, and organized work area in compliance with housekeeping and safety standards. *Must pass pre-employment weld tests administered in accordance with Holtec's WPS requirements. May be required to work overtime, nights, weekends, or travel based on production needs. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references.

Welder Flux-Cored Arc Welding: The Welder must be qualified on multiple weld processes to include FCAW in horizontal, vertical, and overhead positions. This position will perform the highest quality of welding on carbon and stainless steel on all types of products and materials using various types of automatic, semi-automatic or manual welding equipment. (Competitive Pay + Shift Differential) Essential Job Functions: \n • Perform work in a safe manner and follow all safety regulations including wearing all required personal protection equipment (PPE) producing high quality work.\n, • Prepare materials for welding, fit the components, and perform welding process per drawing specification.\n, • Weld components in all positions consistent with quality requirements.\n, • Layout, position, align, fit, clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required preparation, configuration and/or position for welding. \n, • Work from drawings, work orders, supervisor's instructions, weld procedure specifications (WPS) and Holtec standard operating procedures for welding using American Welding Society (AWS) symbols.\n, • Monitor the fitting, burning, and welding process to avoid overheating of parts.\n, • Use tools of measurement for checking dimensions of parts, work to tolerances.\n, • Visually examine welds for quality.\n, • Operate hand and power tools common to the welding trade.\n, • Handle materials as needed by hand, overhead crane, forklift, and other material handling equipment.\n, • Maintain work area in safe, clean, and orderly condition. \n, • The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. \n, • While performing the duties of this job, the associate is regularly required to talk and hear, and stand for long periods of time. The associate is frequently required to stand, walk, climb, balance, stoop, kneel, crouch, reach, push, pull, lift, grasp, feel, and use repetitive motion. The associate may be exposed to adverse environmental conditions, such as in a typical warehouse or external loading areas.\n, • High school degree or equivalent required.\n, • Ability to perform multiple weld processes (FCAW, submerged arc) that pass visual examination and x-ray testing. (Manual welding testing requires successfully passing horizontal, vertical, and overhead position requirements.)\n, • Ability to read blueprints and transfer blueprint information to material.\n, • Minimum of 2-4 years welding in heavy plate manufacturing required.\n, • **MUST pass 2G and 3G FCAW weld tests\n