Trabajos part time en LeganésCrear alertas

Job Description: New positions has arisen as an A400M MRO Network maintenance B1 or/and B2 technician has arisen within Airbus Defence & Space.This position is based at Zaragoza (Spain) Military Air Base, and as such you must be available to work full time in this place.Working as part of a

Job Description: An opportunity for an CAMO Engineer has arisen within Airbus Defence and Space, Getafe (Madrid). Provide Maintenance Engineering and fleet management support activities (associated to EASA/EMAR Part M scope) to manage and assure the continuing airworthiness of the aircraft of the Customer fleet at their facilities, that are necessary to get a safety operation with the highest level of fleet availability and lowest maintenance cost, always in compliance with the Customer's National Regulation Authorities. Support the Customer in all continuing airworthiness activities as required. RESPONSIBILITIES MAIN ACCOUNTABILITIES /MAJOR END RESULT S - Control of continuing airworthiness for Customer fleet - Fleet availability and performance - Maintenance scheduled economics and available performances - Continuous improvement of Customer maintenance programme. MAIN ACTIVITIES Perform the activities covering the scope of CAMO service department, that may include but not limited to: - Development and update of the Operator Maintenance Program (OMP) - Analysis of effectiveness of OMP and optimization processes as required - Analyse Maintenance Status of aircraft in accordance with documentation provided by the Customer and issue maintenance work orders as required to comply with all airworthiness requirements - Analysis of all Engineering Documentation, ADs, SBs, VSBs, Modifications, Engineering Orders, SIL, AOT, etc. for all ATA), in order to be implemented in the Customer fleet. For optional works (SBs, Mods) he/she is responsible to perform cost/benefit analysis (cost, maintenance improvements, operational improvements#) and report to the Customer. Also to provide an aircraft status for SBs, Mods configuration control. - Monitor of the reliability of aircraft systems and components of the Customer fleet, performing all the required activities to issue the operator reliability reports and participation and supporting reliability meetings with the Customer. He/She shall liaise with other members of the Technical Services team (Core and local) and the suppliers/OEM organisations and oversee the reliability programme. - Provide Long, Medium and/or Short Term Planning of the Customer. - Ensure aircraft configuration control and update of aircraft included in the Customer fleet - Ensure Technical Records are controlled and registered as required in the specified IT tool for the Customer. - Support the Customer in any topic related to continuing airworthiness (queries solving, procedures development, etc.) - Perform Customer Engineering Orders in maintenance "language” in order to execute SBs, VSBs, Mods, etc - Answer and support any Technical Query associated with the ATAs analysed. DECISION AND LEADERSHIP AUTHORITY - Liaison with Customer for continuing airworthiness activities and fleet management - Assessment on maintenance program and planning - Assessment to Customer for SBs embodiment due cost / effectiveness analysis in liaison with internal Airbus Military policies and engineering documentation - Assessment to Customer from Reliability analysis - Provide answer to technical queries. SKILLS - Technical: EASA/EMAR Part M and Part 145 regulation; Airline Business & Operations; Customize Maintenance Prog. & Planning; Maintenance and Planning Data Analysis; Maintenance economics/reliability; Maintenance Planning; Configuration Management in service; Aircraft systems and structure knowledge; Knows Maintenance operation; Use maintenance documentation. - Soft: Customer expectations & needs; Manage authorities & customer relationship; Answer customer technical queries; Persuading and influence; Communication skills WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: - Vacation days plus additional days-off along the year. - Attractive salary. - Hybrid model of working when possible. - Collective transport service subject to working calendar/home location. - Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants. - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibility to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospects in a multicultural environment. - Option to access special rates in products & benefits. Other information: Position is located at the Customer facilities in Madrid, during Customer working time. It may be requested to travel to other Customer facilities or Airbus facilities. Other deployments required up to 6 months. It is desirable previous experience on continuing aiworthiness activities at civil or military operators. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Customer Eng.&Technical Support&Services By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: Airbus Defence and Space is looking for an Airworthiness and Certification Engineer (f/m) to join our based in Getafe, Spain. As part of an exciting and challenging new upcoming military Program inside the Military Derivatives department of Air Power, we are building a brand-new team. If you want to be part of the launch of a stimulating, ambitious and thrilling new Program , that will help reinforce the European sovereignty we invite you to join us! Your Challenges: As a member of our team, you will develop and perform the following challenging tasks and concurrence activities: - Definition of Aircraft certification basis and strategy in alignment with the aircraft design and operations - Negotiation and agreement of the certification and airworthiness approach with Airworthiness Authorities (including European authorities and National authorities) - Coordination with internal (design office, program, chief engineering) and external (suppliers) stakeholders to define the best strategy for the product considering the global benefit of Airbus family Aircraft. - Coordination and management of the Certification activities to ensure the deliverables (certification plans, means of compliance demonstrations..) are granted in quality, on time and in compliance with applicable airworthiness regulation according to the program milestones. - Active participation with Airbus Commercial team ensuring collaboration and enrichment across divisions. - Supporting the complete product lifecycle of an aircraft in an E2E Design and Certification Process - Capability to manage the complexity of integrating the military systems and equipments in a civil derivative aircraft and putting an acceptable an adapted certification frame for the final military product - Strong working ties to Engineering Design offices (e.g., stress, analysis, loads,, systems, armament, material & processes, aerodynamic, configuration design, flight physics) where interfaces Design will continuously broaden your knowledge. - Support various stakeholders with certification and airworthiness knowledge (e.g. DOA, quality, Chief Engineer, Architecture and Integration). - In-service experience to define manuals , operational suitability data and instructions for continued airworthiness in compliance with applicable airworthiness regulation and according to A/C use and customer needs - Define applicable certification requirements for ICAs (AMM, Trouble Shooting Manual, IPC, etc..), including ALS and demonstrate its compliance. Support the timely achievement approval of ICAs, through identification of technical issues and associated risk management plan, identification of regulation and interpretation issues. All of this in coordination with design office, including relevant CVEs, Chief Engineer and Services Organisation Your Profile: Abilities, skills and competencies: As a successful candidate, you should be able to demonstrate the following abilities, skills and competences with proved experience: - At least 3 years of Experience in Engineering - High adaptability to work on new topics, new business and in a collaborative mode - Ability to manage and coordinate internal people and external subcontracting companies. - Good level of understanding of the aircraft technical domains (structural design, flight physics, systems...) - Technical background on aerospace disciplines such as systems, structures, flight physics, flight control - Familiar with airworthiness regulation - Studies: Engineering industrial or aerospace (or similar degrees studies) - Languages: Good English level - Spanish and French languages would be plus - Good communication skills, collaboration, proactivity and team play working spirit - Proactive and able to propose new ideas - Collaborative, open minded - Negotiation and influence skills This position requires a security clearance or will require being eligible for clearance by the recognized authorities. Which benefits will you have as Airbus employee? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: - Vacation days plus additional days-off along the year. - Attractive salary. - Hybrid model of working when possible, promoting the work-life balance. - Collective transport service in some sites. - Benefits such as health insurance, employee stock options, retirement plan, or study grants. - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibility to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospects in a multicultural environment. - Special rates in products & benefits #MYCYM This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Qualification & Operability By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for an FTI Installation Design Engineer has arisen within Airbus Defence and Space in Getafe (Madrid). By joining the Flight Test Installation (FTI) Design Team, you will become part of a highly multidisciplinary and multicultural department. We are responsible for designing the critical flight test installations and instrumentation required for aircraft Certification, Qualification, Testing, and continuous product improvement. In this role, you will play a key part in both electrical and mechanical design, directly reinforcing our team in the definition and implementation of complex FTI installations across key Airbus Defence & Space Programs. RESPONSIBILITIES The main tasks and deliverables of the jobholder will include: - Design and integrate electrical system installations and functional electrical architectures. - Prepare and release detailed wiring diagrams and electrical routing definitions. - Develop and integrate mechanical system installations and structural design solutions for FTI. - Manage and maintain strict configuration control of all designed installations and modifications. - Coordinate subcontractor activities, performing technical follow-ups and ensuring quality and on-time delivery. - Support project management by contributing to planning elaboration and budget control activities. SKILLS Is your profile aligned to the following list of skills? Apply! We are looking forward to getting to know you: - Education: Aeronautical, Electrical, or Industrial Engineering degree, or a related technical discipline. - Experience: Around 5 years of professional experience in engineering and design activities, ideally with a strong focus on FTI. - Technical knowledge: Professional proficiency in CATIA V5. Knowledge of 3DX, SEE-XP, and Capital Logic is highly desirable. - Soft skills: High adaptability to work on new technical topics, capability to navigate new business opportunities, and a strong collaborative mindset to work in a networking mode. - Languages: Advanced level of English (written and spoken). - Valuable / Nice to have: Previous experience in manufacturing engineering will be highly valued. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: - Vacation days plus additional days-off along the year. - Attractive salary. - Hybrid model of working when possible, promoting the work-life balance. - Collective transport servic e in some sites. - Benefits such as health insurance, employee stock options, retirement plan, or study grants . - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibi lity to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospect s in a multicultural environ ment. - Special rates in products & benefits - #MYCYM This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: We are looking for a Mechanical Engineer with experience in the space industry to cover the role of AIT Thermo-mechanical Lead of Payload Products. The AIT Thermo-mechanical Lead position presents an exciting opportunity to take on a technical leadership role and provide a robust end-to-end integration process, time and cost optimized for implementation into production. The Payload Product Lead is a dynamic and essential role that deals with project daily challenges, change of priorities and resolving blocking actions to ensure schedule adherence, yet, maintaining quality and costs. We invite you to join a multi-skilled and highly engaged team of Engineers working on one of the top companies of the Space Industry. The Payload Product Lead works together in leadership with the AIT Manager inside Operations TOM. Works on cross multi-functional teams with: - AIT Engineering Teams: Mechanical, Thermal, Antennas and Harness Engineering Project Teams. - MFT leads and Product Owners - Project Management Team - M&P - Product Assurance Team (PA) - Supply Chain General Responsibilities - The Payload Product Lead is the AIT thermo-mechanical project focal point, providing Technical Lead and Expertise. Providing technical lead to the Build Process definition ensuring a correct & consistent process definition for the shopfloor. - Liaises with management over manpower and budgets as necessary. - Provides regular feedback to management on current progress, workings and issues on behalf of the team. - Offers support to management with regards to team/department strategies or any other topics as needed - Support/mentor apprentices and new starters in to the team to foster new talent. During the Project Design Phase: - Attends and/or support all project meetings / reviews - Attends and/or support the PFMA, DMU review, Project Concurrent MFTs with Design Engineering, Industrial Means, Quality and Production. - Attends inputs preparation meeting to define and ensure KIDs for product / project are fit for Manufacture (DFM) - Define/Supports the Build Process, re-enforce and ensure a correct & consolidated process definition: - Industrial Product definition in the context of Collaborative Engineering: product (part detail definition), processes (manufacturing and assembly) and Industrial Means detail definition. Detailed simulation of the process (precedents, restrictions, areas, etc.) - Final tolerance analysis: tolerance stack-up analysis, CIs & KC´s. - Update & agreement of the final Product Structure (As-Planned). - Update and agreement of specifications for Delivered Components (delivery conditions) and work specifications. - Build Process Consolidation and agreement with relevant stakeholders and production area. - Provides Inputs to Industrial Planning: Build process (precedents, restrictions, areas, etc.) balancing, adjustment of process times and skills and estimated lead times. - Provides Inputs of recurring & non-recurring costs associated with the industrial model. - Provides Supplier Industrialization Support: - Technical support for the Manufacture/Purchase strategy. - Technical management in the development of supplier work packages - Technical management of bids, and selecting and contracting products (parts, assemblies, groups) from suppliers. - Manages the creation of the Industrialization documentation (Built Process studies / Process Flows & Budget / Supplier WPs...) AIT Documentation Manages the creation of: - BOM preparation (As-Prepared) - Update As-prepared BOM with auxiliary materials and flight & non-flight material quantities. - Routing preparation (As-Prepared) - Create & update complete routings for standard activities and viability tests / qualification / process preparation. - Internal (Procedures, Work instructions, Technical Instructions, data collection documents, numerical control programs, critical - movement...) and External documentation (user manuals) - MRR / IRR Datapack: Routing & applicable documentation (instructions & documentation) - Update Inputs to Industrial Planning: Build process (precedents, restrictions, areas, etc.) balancing, adjustment of process times and skills and estimated lead times. - Update Inputs of recurring & non-recurring costs associated with the industrial model. During the Execution - Attends and/or supports SQCD Panels Daily meetings at shopfloor, PPS meetings, Schedule reviews and Recovery Plans. - Provides Technical shopfloor support: - Follow up execution of shopfloor activities - Support to operation (applicable documentation understanding, specific analysis....) - Configuration and improvement of the design of the product, the industrial process and resources. - Technical support for pending work: impact reduction and technical solutions - Methods and processes support - Provides timely feedback to appropriate managers on process engineering issues. - Reviews of real recurring & non-recurring costs and Identify / analyse deviations. - Maintenance of Applicable documentation (Procedure, Work instructions, Technical Instructions, Procedures, Data collection documents...) - Supports Assessment of Non-Conformances. Track & Answer Non-Conformance Process Flow. - Hosts and Supports Lessons Learned exercises at key milestones involving all key stakeholders in phase. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Manufacturing Engineering By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: About Highly Integrated Systems - TADYS As part of the newly established Highly Integrated Systems (HIS) domain within Aircraft Systems Centre of Competence (CoC), you will join the Computing Platforms & Multisystems HW/SW Integration group (TADYS2). HIS is the Multisystem and IMA Design Office and Airborne Computing Platforms responsible and centralizes expertise and competencies for driving architectural reuse, strategic alignment, and economies of scale across the CoC. Within this framework, the TADYS2 subdomain focuses on the standardization of embedded software and computing platforms. As a Junior Software Platform Integration Engineer, you will support the CoC’s computing platforms strategy. You will contribute to the development and testing of robust, certifiable, and high-performance software artifacts for computing platforms and you will be helping with the HW/SW integration for multi-systems architectures, essential for the next generation of AirPower systems. This role offers a significant learning opportunity to grow within a highly regulated and technologically advanced aeronautical environment. Key responsibilities In this role, you will assist in the integration and standardization of software platforms through the following pillars: - Requirements & Design Support: Assist in the elicitation and maintenance of Software Requirements Specifications (SRS) for onboard safety-critical computers. Support the development and execution of Validation & Verification (V&V) activities in adherence to RTCA DO-178C (up to DAL-A). - Platform Integration Assistance: Contribute to the integration of software platform architectures. This includes supporting tasks related to partitioning, scheduling, resource allocation, and the integration of third-party application and low-level software (RTOS BSPs, drivers, and middleware). - Standardization & API Support: Help implement and maintain common APIs and standardized access to platform support software (RTOS, BSP, low-level I/O, and middleware) to support various Design and Development Offices. - Feature Implementation: Participate in the development of new capabilities for embeddable solutions, such as secure mathematical functions, file system services, and logging services. - Certification Support: Support the platform software certification process by assisting in the preparation of documentation and evidence required to demonstrate compliance with RTCA DO-178C. - Technical Prototyping: Assist in performing technical benchmarking, rapid prototyping on reference boards, and supporting the evaluation and board bring-up of new target platforms. Required Qualifications & Skills Technical Expertise (Foundational knowledge required): - Programming: Solid understanding of C for real-time embedded systems. Familiarity with GNU toolchains and compilers (GCC, Clang/LLVM). - Computer Architecture: Foundational knowledge of ARM, PowerPC, or x86 architectures. Understanding of MMUs, caches, and memory hierarchies. - Avionics & Protocols: Basic knowledge of avionics data buses (e.g., ARINC-429, CAN, or Ethernet) and digital networks. - Peripherals: Familiarity with low-speed peripherals (UART, SPI, I2C) and basic understanding of DMA. - RTOS & ARINC-653: Academic or internship experience (or strong theoretical knowledge) regarding safety-critical RTOS and the ARINC-653 specification. - Certification Standards: Basic awareness of RTCA DO-178C processes. - Scripting: Ability to use Python for basic automation tasks and understanding of data formats like JSON or XML. Language Skills: - English: Good command of English (B2 level or higher) for technical documentation and team collaboration. Additional Valuable Skills - Experience with Embedded Linux - Familiarity with modeling tools (UML/SysML) - Exposure to static analysis tools and/or structural code coverage tools - Experience working in Agile environments using Jira and Confluence Core Competencies - Strong desire to learn and grow in a complex technical environment. - Attention to detail and a methodical approach to problem-solving. - Ability to follow technical instructions and work effectively within a team. - Proactive attitude towards learning new technologies and standards. Which Benefits will you have as an Airbus employee?: - Vacation days plus additional days-off along the year - Attractive salary. - Hybrid model of working when possible. - Collective transport service subject to working calendar/home location. - Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants. - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibility to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospects in a multicultural environment. - Option to access special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Software Engineering By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: Reporting to the Avionics engineering department in Madrid you will have a stimulating blend of learning and technical work and will gain extensive experience in the design and analysis of avionics engineering, for both small studies and large projects, as well as having the unique opportunity to work on flight algorithms and flight hardware. The possibility for developing in other avionics engineering areas in the short term is also possible and promoted from the department. Besides, beyond avionics engineering, the selected candidate will benefit from a close relation with other engineering domains like electrical, thermal or mechanical architects, all working together in a open space. • RESPONSIBILITIES *, • You will be expected to perform AOCS/GNC design, implementation, verification and validation activities for mission's Phases 0 to E, • The successful candidate will be expected to perform AOCS/GNC design, implementation, verification and validation activities for mission's Phases 0 to E, • You will produce relevant documentation (design justifications, software requirements for AOCS/GNC algorithms, performance analysis documentation etc.), • You will develop software to a prototype level (non/real time simulator development mostly under Matlab /Simulink but also occasionally also in C or Python)., • You will also support reviews and workshops with the customer / partners and stakeholders, • SKILLS *, • .Degree or equivalent in aerospace discipline, • Qualifications with dynamics and filtering/estimation/control engineering content, • Experienced in participating within a GNC/AOCS project at some point of the, • development and validation cycle, • Matlab and Simulink experience, • Being part during last years of Airbus in a trainneship or any other collaboration will be valued. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: • Vacation days plus additional days-off along the year., • Attractive salary., • Hybrid model of working when possible, promoting the work-life balance., • Collective transport service in some sites., • Benefits such as health insurance, employee stock options, retirement plan, or study grants., • On-site facilities (among others): free canteen, kindergarten, medical office., • Possibility to collaborate in different social and corporate social responsibility initiatives., • Excellent upskilling opportunities and great development prospects in a multicultural environment., • Special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Entry Level Job Family: Vehicle Mission & Control By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: New positions has arisen as an A400M MRO Network maintenance B1 or/and B2 technician has arisen within Airbus Defence & Space. This position is based at Zaragoza (Spain) Military Air Base, and as such you must be available to work full time in this place. Working as part of an Airbus D&S Resident Team within the A400M MRO Network, will include the performance and certification of these tasks, including supervision and certification of unlicensed mechanics tasks. This service will take place at the mentioned Main Operating Base of the customer. This position will require a security clearance or will require being eligible for clearance by the recognized authorities. • RESPONSIBILITIES * Your main tasks and responsibilities will include: • Be responsible for performing and certification of both scheduled and unscheduled tasks previously agreed with the customer by Customer Services., • SB implementation: modifications not performed at FAL or appearing after the delivery of the A/C, and from support asked by the Customer for different kind of repairs or maintenance tasks., • Manage small groups of non-licensed mechanics in the performance of maintenance activities and coordination and supervision their OJT, if needed, • Be involved in the setting up of working processes and practices., • Be involved in all aspects of technical support of a new advanced military transport aircraft., • SKILLS *, • EASA or EMAR Part 66 license. Theoretical training without basic 3 years experience would be also valid under particular circumstances., • Type rating included will be a plus, • Experienced working according SB and AMM documentation, • Experience in MRO on a modern digital aircraft: A380, A350 etc., • Strong interpersonal and communication skills., • Independent user in English and Spanish, • WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? * At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: • Vacation days plus additional days-off along the year., • Attractive salary., • Hybrid model of working when possible, promoting the work-life balance., • Collective transport service in some sites., • Benefits such as health insurance, employee stock options, retirement plan, or study grants., • On-site facilities (among others): free canteen, kindergarten, medical office., • Possibility to collaborate in different social and corporate social responsibility initiatives., • Excellent upskilling opportunities and great development prospects in a multicultural environment., • Special rates in products & benefits., • #LMA * This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Production means/Maintenance By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for a Software Engineer has arisen within Airbus Defence and Space, Getafe (Spain). If you are passionate about fighter aircrafts, you spend hours with flight simulators and you are looking for an opportunity to work in a company with cutting-edge technology, please continue reading this job offer. We are seeking Software Engineers to join our development team for the Spanish Trainer. The ideal candidate will have experience in C++ programming and possess a understanding of software engineering. You will be part of the full software development lifecycle -from requirements engineering and architectural design to implementation, testing, and system integration within complex simulation environments. The accountabilities of this position will be applied on: • Developing the simulation SW to be included in the Embedded Training Solution of the SAETA 2 aircraft trainer. • Supporting the development and operation of the SAETA 2 Simulators • Supporting the design, development and deployment of the devices that compose the Ground Based Training System where all the future Spanish Combat Pilots will train. This activity includes Virtual Reality Training Devices. • Collaborate on feasibility studies investigating new features to optimize pilot training. RESPONSIBILITIES - Requirements Engineering: Elicit, analyze, and document high-level and low-level software requirements, ensuring traceability and compliance with rigorous industry standards - Software Design: be part of the architectural and detailed design of complex software components, ensuring scalability, reliability, and performance optimized for real-time or near-real-time systems. - High-Performance Development: Implement robust, efficient, and maintainable code using modern C++ standards. - Verification & Validation (V&V): Define comprehensive test strategies, including unit, integration, and system-level testing. Develop automated test suites to ensure software integrity. - System Integration: Perform hands-on integration of software components into large-scale simulators or avionics hardware-in-the-loop (HIL) environments. - Process Compliance: Adhere to and enforce strict software engineering processes and lifecycle models, ensuring all documentation and artifacts meet mission-critical quality standards. - Mentorship & Review: Conduct rigorous peer code reviews and design reviews to maintain high coding standards and technical excellence within the team. SKILLS - Education: Computer, Aeronautical or Telecommunications Engineering degree or a related discipline - Experience: At least 6-7 years in Software Engineering. In case you have one or more competences described below, you should consider to apply: • Expert C++ Programming: Mastery of C++ with a focus on memory management, concurrency, and performance optimization. • Software Engineering Mastery: Deep knowledge of design patterns and software architecture. • Regulated Process Experience: experience working under strict software development lifecycles (e.g., AQAP, DO-178C, or similar formal methodologies). • Testing Expertise: Proficiency in testing frameworks and a strong understanding of V-Model development cycles. • Systems Integration: Experience integrating software into complex aircraft simulation environments or embedded avionics systems. • Experience using: Linux, Dockers, Conan, Make files. - Availability to travel: average of one week each two months. - Languages: Advanced level in English. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: - Vacation days plus additional days-off along the year. - Attractive salary. - Collective transport service subject to working calendar/home location. - Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants. - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibility to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospects in a multicultural environment. - Option to access special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for a SW Requirements and Test Engineer has arisen within Airbus Defence and Space , Getafe (Madrid ). Our world is changing. And so are we. From our commitment to zero-carbon flight (#ZEROe) to cleaning up space, sustainability is at the heart of our purpose. So what's your next change? Our team, “Airborne Connectivity” is part of the engineering function in Airbus Defence and Space, designing and developing products, hardware and software, providing connectivity and communications capabilities to our customers. These products are integrated as part of the solutions provided by two out of the three main programme lines in Airbus Defence and Space, Secure Communications in Connected Intelligence, and all military airborne platforms in Military Air Systems (Eurofighter, C295, MRTT, SIRTAP, Eurodrone, etc.) Be part of the future by making the next generation of high-integrity airborne real-time systems, paving the way for innovation in smart connectivity, distributed networking, and artificial intelligence adoption. You will take part in a high performance team that is involved in the complete lifecycle of the embedded software product, from building the SW requirements, to the final testing and target computer implementation. You should be able to lead and take responsibility on design/architectural decisions, as well as leading the development of specific projects. TRAVEL REQUIRED : Occasional travel within national and international areas (around 3-day trip). RESPONSIBILITIES - Define and document software requirements based on system functional specifications. - Develop comprehensive software verification test cases and procedures based on corresponding software requirements. - Establish and maintain traceability matrices between different levels of specifications and test cases. - Execute test cases, record results, and create detailed problem reports for any identified defects. - Manage and track problem reports through resolution, ensuring timely and effective communication with development teams. - Partner with product and program managers, system engineers, and validation teams to drive software products from conception to delivery. - Participate in the planning and scoping of team projects, providing input on requirements and testing efforts. - Support product owners and project managers in delivering high-quality software on time and within budget. - Promote innovation across the department by suggesting improvements in processes, tools, and methodologies. - Stay updated with industry best practices and emerging technologies in software requirements and testing. SKILLS Required skills and qualifications: - Educated in software, IT, telecommunication, industrial engineering degree or a related discipline. - Expertise on real-time and/or embedded software development. - Expertise on defining SW requirements. - Expertise on software verification. - +3 years of experience - Fluent level of English and Spanish. Preferred skills and qualifications: - Knowledge of SW airworthiness certification processes: DO-178C, EFA Standards. - Awareness of cyber-security concepts and accreditation processes ( Common Criteria ). - Expertise on C/C++ and/or Ada programming languages and low-level development. - Experience on: system & SW design tools ( SysML, UML ), integrated development environment ( GPS, AdaMulti, Eclipse ), verification tools ( Vector Cast, AdaTest95 ). - Interest and ability to conciliate multiple perspectives regarding products, projects and processes. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: - Vacation days plus additional days-off along the year. - Attractive salary. - Hybrid model of working when possible, promoting the work-life balance. - Collective transport service subject to working calendar/home location. - Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants. - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibility to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospects in a multicultural environment. - Option to access special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Software Engineering By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: Reporting to the Avionics engineering department in Madrid you will have a stimulating blend of learning and technical work and will gain extensive experience in the design and analysis of avionics engineering, for both small studies and large projects, as well as having the unique opportunity to work on flight algorithms and flight hardware. The possibility for developing in other avionics engineering areas in the short term is also possible and promoted from the department. Besides, beyond avionics engineering, the selected candidate will benefit from a close relation with other engineering domains like electrical, thermal or mechanical architects, all working together in a open space. RESPONSIBILITIES - You will be expected to perform AOCS/GNC design, implementation, verification and validation activities for mission’s Phases 0 to E - The successful candidate will be expected to perform AOCS/GNC design, implementation, verification and validation activities for mission’s Phases 0 to E - You will produce relevant documentation (design justifications, software requirements for AOCS/GNC algorithms, performance analysis documentation etc.) - You will develop software to a prototype level (non/real time simulator development mostly under Matlab /Simulink but also occasionally also in C or Python). - You will also support reviews and workshops with the customer / partners and stakeholders SKILLS - .Degree or equivalent in aerospace discipline - Qualifications with dynamics and filtering/estimation/control engineering content - Experienced in participating within a GNC/AOCS project at some point of the - development and validation cycle - Matlab and Simulink experience - Being part during last years of Airbus in a trainneship or any other collaboration will be valued. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: - Vacation days plus additional days-off along the year. - Attractive salary. - Hybrid model of working when possible, promoting the work-life balance. - Collective transport service in some sites. - Benefits such as health insurance, employee stock options, retirement plan, or study grants. - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibility to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospects in a multicultural environment. - Special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Entry Level Job Family: Vehicle Mission & Control By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for an Spanish Trainer Simulation - Senior Software Simulation Engineer has arisen within Airbus Defence and Space, Getafe (Madrid). The selected candidate will join the Development Team for the Spanish Trainer. You will be responsible for leading the design, development, and management of advanced software simulations, as well as delivering training on these solutions in Spanish. You will be part of the full software development lifecycle - from requirements engineering and architectural design to implementation, testing, and system integration within complex simulation environments. RESPONSIBILITIES - Developing the simulation SW to be included in the Embedded Training Solution of the SAETA 2 aircraft trainer. - Supporting the development and operation of the SAETA 2 Simulators. - Supporting the design, development, and deployment of the devices that compose the Ground Based Training System where all future Spanish Combat Pilots will train (including Virtual Reality Training Devices). - Collaborating on feasibility studies investigating new features to optimize pilot training. - Elicit, analyze, and document high/low-level software requirements ensuring full traceability, while leading the architectural design of complex components optimized for real-time systems. - Implement robust, high-performance code using modern C++, and perform hands-on integration into large-scale simulators or avionics Hardware-in-the-Loop (HIL) environments. - Define test strategies (including automated test suites), conduct peer code reviews, and adhere to strict mission-critical software lifecycle standards. SKILLS Is your profile aligned to the following list of skills? Apply! We are looking forward to know you: - Education: Degree in Computer Science, Computer Engineering, or a related discipline. - Experience: At least 10 years of experience working under strict software development lifecycles (e.g., AQAP, DO-178C, or similar formal methodologies), proficiency in testing frameworks and a strong understanding of V-Model development cycles and experience integrating software into complex simulation environments or embedded avionics systems. - Soft skills: a highly proactive, driven, and fully committed PERSON. We deeply value grit, perseverance, and resilience-professionals with a strong work ethic who overcome difficult circumstances through hard work and determination. - Languages: Advanced level in English. - Technical knowledge: Expert C++ Programming, Mastery of C++ with a focus on memory management, concurrency, and performance optimization. Deep knowledge of design patterns and software architecture. Linux, Dockers, Conan, Make files. - Availability to travel: average of one week each two months. - Valuable / Nice to have: a C++ Specialist with proven team management skills. We seek a software development expert with a deep specialization in any phase of the software development lifecycle. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: - Vacation days plus additional days-off along the year. - Attractive salary. - Hybrid model of working when possible. - Collective transport service subject to working calendar/home location. - Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants. - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibility to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospects in a multicultural environment. - Option to access special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for a Flight Physics PMTD Leader has arisen within Airbus Defence and Space, Getafe (Madrid). The selected candidate will join the Technology & Capability team within the Integration and Strategy domain (TADGI), which is a German-Spanish engineering organization in Airbus Defence and Space - Air Power Engineering. The organization is responsible for the flight physics deliverables for all Air Power programmes and digitalization & technology. As Flight Physics PMTD Leader, you will apply your knowledge and experience in process, methods and tool development (PMTD) to push Flight Physics capabilities to make the program a success. This would be done ensuring the next level of digitalization and advanced technologies and capabilities for the program. With this, you will contribute to increase efficiency, effectiveness and competitiveness of Flight Physics CoC established in the Flight Physics Technology and Digital strategies. RESPONSIBILITIES - Manage the Flight Physics Process, Methods, Tools and Data (PMTD) portfolio for an specific program. Special focus will need to be put on the CoC deliveries for the program are executed on time, cost and quality. - Drive the Flight Physics PMT process convergence and execute it in the agreed terms to ensure PMTD gaps and needs are fully managed. Reflect on the ways of working and continuously improve as needed for the program success. - Lead the PMTD Integrated Product Team (IPT) - Flight Physics to ensure Flight Physics activities and priorities are captured by TAXD. - Drive the Digital transformation of Flight Physics by coordinating transverse initiatives that push Air Power competitiveness and especially for the program efficiency. A non-complete list includes Air Power Digital Chapter and Digital Strategies. Become the Flight Physics interface to TAX, Digital and TADX. - Ensure process and document referential management aligning with internal and external flight physics stakeholders for the program. - Development of integrated solutions to support the end-to-end processes digitalization and digital transformation of Air Power - Engineering with special focus on the program. - Develop, prove, validate and deploy disruptive ways of solving problems in flight physics with a holistic approach that can grow the competitiveness of the program. Challenge the status quo. SKILLS Is your profile aligned to the following list of skills? Apply! We are looking forward to know you: - Education: University degree in engineering, computer science, mathematics or equivalent. - Experience: At least 3 years professional experience in programming & data science in development and engineering areas. Specifically: - Experience on Flight Physics and Overall Aircraft development process and engineering activities. - Experience in managing projects in a complex and international environment. - Soft skills: - C ommunication and influencing skills to be an effective leader are required for this position. - Especially important: Aligning and convincing both internal and external flight physics stakeholders. - Languages: Advanced level in English & Spanish (both written and spoken). - Additionally valued competences: - PMP or other project management accreditation would be a plus. - System Engineering and Model Based System Engineering would be a plus - Experience on continuous improvement and relevant process management experience are a plus. Especially Green or Black belt certifications would be appreciated. - Previous experience in Machine learning modeling for Engineering applications would be a plus. - Previous experience in Python and C++ and state-of -the art data science and AI frameworks are a plus. - Previous experience with front end and database development would be a plus - Previous experience on CFD & FEM would be a plus. - Previous experience on High Performance Computing and Linux server administration would be a plus. - Strong desire to work, learn and grow as part of a digitalization and technology team. WHICH BENEFITS WILL YOU HAVE AS AN AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: - Vacation days plus additional days-off along the year. - Attractive salary. - Hybrid model of working when possible, promoting the work-life balance. - Collective transport service subject to working calendar/home location. - Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants. - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibility to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospects in a multicultural environment. - Option to access special rates in products & benefits. #MYCYM This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Flight & Space Physics By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: Reporting to the Avionics engineering department in Madrid you will have a stimulating blend of learning and technical work and will gain extensive experience in the design and analysis of avionics engineering, for both small studies and large projects, as well as having the unique opportunity to work on flight algorithms and flight hardware. The possibility for developing in other avionics engineering areas in the short term is also possible and promoted from the department. Besides, beyond avionics engineering, the selected candidate will benefit from a close relation with other engineering domains like electrical, thermal or mechanical architects, all working together in a open space. • RESPONSIBILITIES *, • You will be expected to perform AOCS/GNC design, implementation, verification and validation activities for mission's Phases 0 to E, • The successful candidate will be expected to perform AOCS/GNC design, implementation, verification and validation activities for mission's Phases 0 to E, • You will produce relevant documentation (design justifications, software requirements for AOCS/GNC algorithms, performance analysis documentation etc.), • You will develop software to a prototype level (non/real time simulator development mostly under Matlab /Simulink but also occasionally also in C or Python)., • You will also support reviews and workshops with the customer / partners and stakeholders, • SKILLS *, • .Degree or equivalent in aerospace discipline, • Qualifications with dynamics and filtering/estimation/control engineering content, • Experienced in participating within a GNC/AOCS project at some point of the, • development and validation cycle, • Matlab and Simulink experience, • Being part during last years of Airbus in a trainneship or any other collaboration will be valued. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: • Vacation days plus additional days-off along the year., • Attractive salary., • Hybrid model of working when possible, promoting the work-life balance., • Collective transport service in some sites., • Benefits such as health insurance, employee stock options, retirement plan, or study grants., • On-site facilities (among others): free canteen, kindergarten, medical office., • Possibility to collaborate in different social and corporate social responsibility initiatives., • Excellent upskilling opportunities and great development prospects in a multicultural environment., • Special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Entry Level Job Family: Vehicle Mission & Control By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for a Methods & Tools Software Developer Engineer has arisen within Airbus Defence and Space, Getafe (Madrid). The selected candidate will join the Data Processing and Analysis Development group within the Ground Station Team, as part of the Flight and Integration Test Centre. You will be responsible for developing, optimizing, and maintaining the software ecosystem used by Test and System Specialists to perform data analysis across key Airbus Defence & Space programs (including A330 MRTT, A400M, C295, Eurofighter, SIRTAP, and Eurodrone). In this role, you will act as a bridge between the Analysis Community in Spain and the Ground Station team, offering direct technical support across diverse domains such as Avionics, Mission, Performance, Handling Qualities, Powerplant, General Systems, Aerial Delivery, and Datalinks. RESPONSIBILITIES - Design, implement, and maintain software tools used by Test Centre Analysis Teams to process and analyze test data. - Collaborate closely with specialized Test Analysis groups to translate complex mathematical models into functional, efficient software tools. - Shape the future technology stack for Analysis Tools by guiding the migration and integration of the current toolset into the new Time Series Analysis Tool Platform for Military (TSASM). - Act as the main technical point of contact between the Ground Station Team and the Spanish Analysis Community, facilitating constant communication and specialized tool support. SKILLS Is your profile aligned to the following list of skills? Apply! We are looking forward to know you: - Education: Bachelor’s or Master’s degree in Aeronautical Engineering, Aerospace Engineering, or a related discipline with a focus on scientific computing. - Technical knowledge: - Strong programming knowledge of MATLAB for scientific applications. - Proficiency in Python and its core data analysis libraries (NumPy, Pandas, SciPy, Matplotlib, and Jupyter ecosystem). - Knowledge of CI/CD tools (Git mandatory, Jenkins and Nexus desirable) and Agile methodologies (Jira, Confluence). - Deep interest in scientific programming with the ability to implement mathematical equations into efficient code. - Languages: Advanced level in English (both written & spoken); Spanish capability is desirable for local team coordination. - Soft skills: Excellent interpersonal and communication skills with the ability to translate complex software concepts to non-software engineers and vice versa. - Valuable / Nice to have: Experience with compiled languages (Fortran 77/90, C++) or willingness to learn them, as well as familiarity with Python libraries like SimPy and Numba. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: - Vacation days plus additional days-off along the year. - Attractive salary. - Hybrid model of working when possible, promoting the work-life balance. - Collective transport service in some sites. - Benefits such as health insurance, employee stock options, retirement plan, or study grants. - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibility to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospects in a multicultural environ ment. - Special rates in products & benefits. #MYCYM This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: About Highly Integrated Systems - TADYS As part of the newly established Highly Integrated Systems (HIS) domain within Aircraft Systems Centre of Competence (CoC), you will join the Computing Platforms & Multisystems HW/SW Integration group (TADYS2). HIS is the Multisystem and IMA Design Office and Airborne Computing Platforms responsible and centralizes expertise and competencies for driving architectural reuse, strategic alignment, and economies of scale across the CoC. Within this framework, the TADYS2 subdomain focuses on the standardization of embedded software and computing platforms. As a Senior Software Platform Integration Engineer, you will spearhead the CoC’s computing platforms strategy, ensuring the delivery of robust, certifiable, and high-performance software artifacts for computing platforms and you will be dealing with the HW/SW integration for multi-systems architectures, essential for the next generation of AirPower systems. Key responsibilities In this role, you will drive the integration and standardization of software platforms through the following pillars: - Requirements & Design: Elicit and maintain Software Requirements Specifications (SRS) for onboard safety-critical computers. Design, develop, and perform Validation & Verification (V&V) of software artifacts in strict adherence to RTCA DO-178C (up to DAL-A). - Platform Integration & Architecture: Lead the definition of full software platform architectures for multisystem computing platforms. This includes partitioning, scheduling, resource allocation, and the integration of third-party application and low-level software (RTOS BSPs, drivers, and middleware). - Standardization & API Development: Drive the CoC strategy by providing common APIs and standardized access to platform support software (RTOS, BSP, low-level I/O, and middleware) to support various Design and Development Offices. - Architecture Evolution: Design and implement new capabilities for embeddable solutions, including secure mathematical functions, robust file system services, and time/logging services to support the communalization strategy. - Certification & Compliance: Share responsibility for the platform software certification process, interfacing with certification authorities to demonstrate compliance with RTCA DO-178C. - Technology Assessment & Bring-up: Support the CoC strategy by performing trade-off analyses, technical benchmarking, and rapid prototyping on reference boards. Collaborate in the evaluation and board bring-up of new target platforms, with a focus on multicore architectures. Required Qualifications & Skills Technical Expertise : - Programming: Advanced proficiency in C for real-time embedded systems. Experience with GNU toolchains and modern/legacy compilers (GCC, Clang/LLVM, Diab). - Computer Architecture: Strong background in ARM, PowerPC, or x86 and SoC architectures. Deep understanding of MMUs, caches, memory hierarchies, and pipelining. - Avionics & Protocols: Expert knowledge of avionics data buses, including legacy (ARINC-429, MIL-STD-1553B, CAN) and modern digital networks (AFDX, TSN), as well as analog/discrete I/O. - Peripherals & Interconnects: Extensive experience with low-speed peripherals (UART, SPI, I2C) and high-speed interconnects (PCIe) and DMA. - RTOS & ARINC-653: Advanced knowledge of safety-critical RTOS and the ARINC-653 specification. Hands-on experience with COTS solutions (e.g., Wind River VxWorks 653, PikeOS, Green Hills Integrity, or DEOS). - Certification Standards: In-depth knowledge of RTCA DO-178C and RTCA DO-330. - Scripting & Data: Proficiency in Python for automation (CI/CD, hardware setup) and solid understanding of data serialization (JSON, XML). Language Skills: - English: Professional negotiation level. Additional Valuable Skills - Embedded Linux: Experience in driver development and platform software for mission or safety-critical Linux systems. - Modeling: Familiarity with UML and hands-on experience with SysML tools (e.g., Cameo, IBM Rhapsody). - Safety-Critical Analysis: Experience with static analysis tools (Polyspace, SciTools Understand) and structural code coverage tools (LDRA). - Performance Profiling: Knowledge of Processor Performance Monitor Counters (PMC) and hardware event monitors, specifically regarding multicore resource contention and interference mitigations. - Methodologies: Experience working in Agile environments using Jira and Confluence. Core Competencies - Proactivity and high autonomy. - Strong analytical problem-solving mindset. - Ability to collaborate effectively in complex, cross-functional teams. Which Benefits will you have as an Airbus employee?: - Vacation days plus additional days-off along the year - Attractive salary. - Hybrid model of working when possible. - Collective transport service subject to working calendar/home location. - Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants. - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibility to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospects in a multicultural environment. - Option to access special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Software Engineering By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for an Services Bulletin Engineer has arisen within Airbus Defence & Space in Getafe related to MRTT platform. The successful candidate will join the CUSTOMER SERVICES ENGINEERING SUPPORT Department. The Service Bulletin (SB) is the official document used to provide operators with the technical data governing the embodiment of approved modifications or the accomplishment instructions of inspections to be performed on in-service aircraft. The jobholder is responsible, as part of the process, to provide timely, and with appropriate quality the Service Bulletins (SB) that allow customer modify/upgrade its product, contributing to fulfil Airworthiness and Safety requirements, customer satisfaction, customer needs and meet contractual operational commitments. Service Bulletin leader has the end to end Accountability for SB on Time, on Cost & on Quality Release for the SBs under its responsibility. RESPONSIBILITIES Your main tasks and accountabilities will include: - Subcontractor deliverables follow up for the SB under its responsibility - Agreement with all appropriate Organizations on a specific corrective action plan for each significant in-service technical issue. - Asses specific difficulties with each technical issue's agreed action plan and propose alternative actions if necessary. - Interface with the Design Office requiring support and agreeing with them, as required, technical solutions. - Airworthiness Office coordinating with them actions when safety is involved. - Control and coordination of assigned SB Incidences & Technical Queries answers to customers with Front Office support. - Supporting customers/MRO organizations for questions related to issued Service Bulletins. - Supporting customers/MRO organizations for the implementation of the SBs This role will involve some travel for business and as such you must be able to travel accordingly. SKILLS As the successful candidate, you will need: - At least 3 years of experience in Customer Services/Design Office/Manufacturing Engineering/MAP - Experience in the MRTT or A400M/LTA would be desired - Experience in Services Bulletins would be a plus - Engineering Degree or equivalent - Ability to manage conflicts proactively - International business experience - Effective decision making - Assertiveness - Negotiation level of English and Spanish is required Young graduate, Airbus Internship will be a plus WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: - - Vacation days plus additional days-off along the year. - Attractive salary. - Hybrid model of working when possible. - Collective transport service subject to working calendar/home location. - Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants. - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibility to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospects in a multicultural environment. - Option to access special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Entry Level Job Family: Customer Eng.&Technical Support&Services By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for an Services Bulletin Engineer has arisen within Airbus Defence & Space in Getafe related to MRTT platform. The successful candidate will join the CUSTOMER SERVICES ENGINEERING SUPPORT Department. The Service Bulletin (SB) is the official document used to provide operators with the technical data governing the embodiment of approved modifications or the accomplishment instructions of inspections to be performed on in-service aircraft. The jobholder is responsible, as part of the process, to provide timely, and with appropriate quality the Service Bulletins (SB) that allow customer modify/upgrade its product, contributing to fulfil Airworthiness and Safety requirements, customer satisfaction, customer needs and meet contractual operational commitments. Service Bulletin leader has the end to end Accountability for SB on Time, on Cost & on Quality Release for the SBs under its responsibility. • RESPONSIBILITIES * Your main tasks and accountabilities will include: • Subcontractor deliverables follow up for the SB under its responsibility, • Agreement with all appropriate Organizations on a specific corrective action plan for each significant in-service technical issue., • Asses specific difficulties with each technical issue's agreed action plan and propose alternative actions if necessary., • Interface with the Design Office requiring support and agreeing with them, as required, technical solutions., • Airworthiness Office coordinating with them actions when safety is involved., • Control and coordination of assigned SB Incidences & Technical Queries answers to customers with Front Office support., • Supporting customers/MRO organizations for questions related to issued Service Bulletins., • Supporting customers/MRO organizations for the implementation of the SBs This role will involve some travel for business and as such you must be able to travel accordingly. • SKILLS * As the successful candidate, you will need: • At least 3 years of experience in Customer Services/Design Office/Manufacturing Engineering/MAP, • Experience in the MRTT or A400M/LTA would be desired, • Experience in Services Bulletins would be a plus, • Engineering Degree or equivalent, • Ability to manage conflicts proactively, • International business experience, • Effective decision making, • Assertiveness, • Negotiation level of English and Spanish is required Young graduate, Airbus Internship will be a plus, • WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? * At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: • *, • Vacation days plus additional days-off along the year., • Attractive salary., • Hybrid model of working when possible., • Collective transport service subject to working calendar/home location., • Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants., • On-site facilities (among others): free canteen, kindergarten, medical office., • Possibility to collaborate in different social and corporate social responsibility initiatives., • Excellent upskilling opportunities and great development prospects in a multicultural environment., • Option to access special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Entry Level Job Family: Customer Eng.&Technical Support&Services By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for a Flight Physics PMTD Leader has arisen within Airbus Defence and Space, Getafe (Madrid). The selected candidate will join the Technology & Capability team within the Integration and Strategy domain (TADGI), which is a German-Spanish engineering organization in Airbus Defence and Space - Air Power Engineering. The organization is responsible for the flight physics deliverables for all Air Power programmes and digitalization & technology. As Flight Physics PMTD Leader, you will apply your knowledge and experience in process, methods and tool development (PMTD) to push Flight Physics capabilities to make the program a success. This would be done ensuring the next level of digitalization and advanced technologies and capabilities for the program. With this, you will contribute to increase efficiency, effectiveness and competitiveness of Flight Physics CoC established in the Flight Physics Technology and Digital strategies. RESPONSIBILITIES Manage the Flight Physics Process, Methods, Tools and Data (PMTD) portfolio for an specific program. Special focus will need to be put on the CoC deliveries for the program are executed on time, cost and quality. Drive the Flight Physics PMT process convergence and execute it in the agreed terms to ensure PMTD gaps and needs are fully managed. Reflect on the ways of working and continuously improve as needed for the program success. Lead the PMTD Integrated Product Team (IPT) - Flight Physics to ensure Flight Physics activities and priorities are captured by TAXD. Drive the Digital transformation of Flight Physics by coordinating transverse initiatives that push Air Power competitiveness and especially for the program efficiency. A non-complete list includes Air Power Digital Chapter and Digital Strategies. Become the Flight Physics interface to TAX, Digital and TADX. Ensure process and document referential management aligning with internal and external flight physics stakeholders for the program. Development of integrated solutions to support the end-to-end processes digitalization and digital transformation of Air Power - Engineering with special focus on the program. Develop, prove, validate and deploy disruptive ways of solving problems in flight physics with a holistic approach that can grow the competitiveness of the program. Challenge the status quo. SKILLS Is your profile aligned to the following list of skills? Apply! We are looking forward to know you: Education: University degree in engineering, computer science, mathematics or equivalent. Experience: At least 3 years professional experience in programming & data science in development and engineering areas. Specifically: Experience on Flight Physics and Overall Aircraft development process and engineering activities. Experience in managing projects in a complex and international environment. Soft skills: C ommunication and influencing skills to be an effective leader are required for this position. Especially important: Aligning and convincing both internal and external flight physics stakeholders. Languages: Advanced level in English & Spanish (both written and spoken). Additionally valued competences: PMP or other project management accreditation would be a plus. System Engineering and Model Based System Engineering would be a plus Experience on continuous improvement and relevant process management experience are a plus. Especially Green or Black belt certifications would be appreciated. Previous experience in Machine learning modeling for Engineering applications would be a plus. Previous experience in Python and C++ and state-of -the art data science and AI frameworks are a plus. Previous experience with front end and database development would be a plus Previous experience on CFD & FEM would be a plus. Previous experience on High Performance Computing and Linux server administration would be a plus. Strong desire to work, learn and grow as part of a digitalization and technology team. WHICH BENEFITS WILL YOU HAVE AS AN AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport service subject to working calendar/home location. Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. Option to access special rates in products & benefits. #MYCYM This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Flight & Space Physics By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: • An opportunity for a SW Requirements and Test Engineer has arisen within Airbus Defence and Space , Getafe (Madrid ). * Our world is changing. And so are we. From our commitment to zero-carbon flight (#ZEROe) to cleaning up space, sustainability is at the heart of our purpose. So what's your next change? Our team, "Airborne Connectivity" is part of the engineering function in Airbus Defence and Space, designing and developing products, hardware and software, providing connectivity and communications capabilities to our customers. These products are integrated as part of the solutions provided by two out of the three main programme lines in Airbus Defence and Space, Secure Communications in Connected Intelligence, and all military airborne platforms in Military Air Systems (Eurofighter, C295, MRTT, SIRTAP, Eurodrone, etc.) Be part of the future by making the next generation of high-integrity airborne real-time systems, paving the way for innovation in smart connectivity, distributed networking, and artificial intelligence adoption. You will take part in a high performance team that is involved in the complete lifecycle of the embedded software product, from building the SW requirements, to the final testing and target computer implementation. You should be able to lead and take responsibility on design/architectural decisions, as well as leading the development of specific projects. TRAVEL REQUIRED : Occasional travel within national and international areas (around 3-day trip). • RESPONSIBILITIES *, • Define and document software requirements based on system functional specifications., • Develop comprehensive software verification test cases and procedures based on corresponding software requirements., • Establish and maintain traceability matrices between different levels of specifications and test cases., • Execute test cases, record results, and create detailed problem reports for any identified defects., • Manage and track problem reports through resolution, ensuring timely and effective communication with development teams., • Partner with product and program managers, system engineers, and validation teams to drive software products from conception to delivery., • Participate in the planning and scoping of team projects, providing input on requirements and testing efforts., • Support product owners and project managers in delivering high-quality software on time and within budget., • Promote innovation across the department by suggesting improvements in processes, tools, and methodologies., • Stay updated with industry best practices and emerging technologies in software requirements and testing., • SKILLS * Required skills and qualifications: • Educated in software, IT, telecommunication, industrial engineering degree or a related discipline., • Expertise on real-time and/or embedded software development., • Expertise on defining SW requirements., • Expertise on software verification., • +3 years of experience, • Fluent level of English and Spanish. Preferred skills and qualifications: • Knowledge of SW airworthiness certification processes: DO-178C, EFA Standards., • Awareness of cyber-security concepts and accreditation processes ( Common Criteria )., • Expertise on C/C++ and/or Ada programming languages and low-level development., • Experience on: system & SW design tools ( SysML, UML ), integrated development environment ( GPS, AdaMulti, Eclipse ), verification tools ( Vector Cast, AdaTest95 )., • Interest and ability to conciliate multiple perspectives regarding products, projects and processes., • WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? * At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: • Vacation days plus additional days-off along the year., • Attractive salary., • Hybrid model of working when possible, promoting the work-life balance., • Collective transport service subject to working calendar/home location., • Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants., • On-site facilities (among others): free canteen, kindergarten, medical office., • Possibility to collaborate in different social and corporate social responsibility initiatives., • Excellent upskilling opportunities and great development prospects in a multicultural environment., • Option to access special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Software Engineering By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: At Airbus Defense and Space, the domain 'Integration Test & Analysis' in Spain is looking for additional staff in the perimeter of Avionics & Mission Systems area supporting Lab & Rig Integration Test activities. The successful applicant will become part of the team based in Getafe (although depending on program workload it may also require support to testing activities during short-mid periods of time in other sites as Manching). The scope of responsibility covers from the test requirements gathering and assessment in order to define the integrated tests procedures and test plan; the execution of the tests procedures and final results analysis and reporting. The tests support covers from development up to certification and qualification of the systems. As of today, the main customers are the current aircraft programs A330 MRTT, A400M, C295, Eurofighter, SIRTAP, TDMS and Tornado, but in the very near future EuroMale, NGF and FCAS will also be part of it. We are currently looking for a Test Specialist (mainly devoted to Avionics & Mission), within Integration Test & Analysis scope, for the Spanish perimeter at Getafe site, who will help us to prepare, support, execute, analyze and report all related integration test activities on sub-system/system level for avionics and mission integration scope in accordance with the requirements of the program-specific V&V plans in a technical work environment with continuously increasing complexity. If you have a technical background as engineer with testing competences, and also feel comfortable in the technical coordination tasks among test center domains, and relevant design offices, take advantage of this unique opportunity for a very varied, interesting and challenging job. MAIN ACTIVITIES - Support department project coordinators and Test specialists to prepare, execute integration test on ground on the aircraft, support flight test execution and derive required reporting and data analysis. - Support Test Specialist to prepare the contribution to the Integrated Test Team forum within the scope of the activities. - Support for development, certification and qualification lab/rig testing activities according to Test Program requirements. Ensure & support appropriate V&V strategy for these activities. Follow-up of test progress. - Participate in the elaboration of Test planning; Review, optimize and challenge Test Requests. - Interface with DO, AW and certification authorities, supporting test activities on certification meetings when required, write Certification/Qualification Cards and test plans and Certification/Qualification Test Reports. - Interface and coordination with Test Integrators, Design Offices, Chief Engineering Office and Program Offices. Provide expertise to system architecture and design definition for Avionics & Mission Systems integration - Identify, categorize, track and analyse system misbehaviours, providing the detailed information and associated impact to the designer - Optimize test data analysis methodologies and procedures and manage priorities. REQUIRED SKILLS We are looking for candidates with at least 5 years of experience in Integration Testing (RIG/LAB Level) any AVS/MISSION systems, and the following skills and experience: - Knowledge of Integration & Tests route map - Highly focused in complying with timescales and milestones - Open minded to offer new ideas for improving processes and tools. - Available for travel and be prepared to work in several locations. - Any official Formation in Integration and Test will be valued - Technical negotiation level in English and Spanish. - Competences related to Human Factors will be appreciated - NATO SECRET will be valued! WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: - Vacation days plus additional days-off along the year. - Attractive salary. - Hybrid model of working when possible, promoting the work-life balance. - Collective transport service in some sites. - Benefits such as health insurance, employee stock options, retirement plan, or study grants. - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibility to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospects in a multicultural environment. - Special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: The job holder will be part of Planning and Production Control Team in Retrofit and will be in charge of the following task to support Retrofit Aircraft Delivery On Time, On Cost and On Quality. RESPONSABILITIES - Take part in MFTs in charge of preparing retrofit events in Getafe. Provide unique interface with TASM for material management. Preparation and report of missing parts status per MSN. - Timely escalation of missing parts with high impact (critical path) on retrofit process. - Provide missing part analysis per subsidiary to planning to ensure the proper alignment between missing part status and operative planning. - Support finding process and resolution. Provide quotation and availability of material if needed. Maintain / Update expendables safety stock in accordance with programs. - E2E consumable flow management. - Deliver to shopfloor station barchart and updates including inflow and findings. - Define, create, maintain and provide visibility of KPIs needed for Retrofit Management. - Support to Production for KPI assessment and decision making. Dashboard creation and update. - Timely generation of planning simulations for new inputs or deviations. Program Main Milestones follow up. - Create and update the platform to manage and visualize work on shopfloor. - Support to production / quality for work preparation and task sequence. - Load Capacity Analysis / Control and track headcount (targets, movements...). - Support to production to solve issues under cost perimeter. - Responsible for Retrofit Tactical Plan Update and Follow up. UP Management and Update. - Simulate different scenarios for MRO/Retrofit Getafe. SKILLS - We are looking for candidates with the following skills and experience: - Knowledge of retrofit, services processes, functions (finance, program HR, procurement, operations etc.) and IT tools (SAP, Pelícano, etc.) would be an asset. - Good communication skills. Outstanding organizational and leadership skills. - Organized & Structured Languages: English mandatory - Academic education: University degree WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Collective transport service in some sites. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. WANT TO KNOW MORE ABOUT US? #AirbusDiversity Airbus is a leader in designing, manufacturing and delivering aerospace products, services and solutions to customers on a worldwide scale, pioneering sustainable aerospace for a safe and united world. With around 130,000 employees and as the largest aeronautics and space company in Europe and a worldwide leader, Airbus is at the forefront of the aviation industry, connecting people and places via air and space. At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Last but not least, the company has been awarded with the “Top Employers Spain 2023” certification and "Top Employers Europe 2023" by Top Employers Institute. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Agency / Temporary ------- Experience Level: Professional Job Family: Production Planning & Scheduling By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for an FTI Installation Design Engineer has arisen within Airbus Defence and Space in Getafe (Madrid). By joining the Flight Test Installation (FTI) Design Team, you will become part of a highly multidisciplinary and multicultural department. We are responsible for designing the critical flight test installations and instrumentation required for aircraft Certification, Qualification, Testing, and continuous product improvement. In this role, you will play a key part in both electrical and mechanical design, directly reinforcing our team in the definition and implementation of complex FTI installations across key Airbus Defence & Space Programs. RESPONSIBILITIES The main tasks and deliverables of the jobholder will include: • Design and integrate electrical system installations and functional electrical architectures., • Prepare and release detailed wiring diagrams and electrical routing definitions., • Develop and integrate mechanical system installations and structural design solutions for FTI., • Manage and maintain strict configuration control of all designed installations and modifications., • Coordinate subcontractor activities, performing technical follow-ups and ensuring quality and on-time delivery., • Support project management by contributing to planning elaboration and budget control activities. SKILLS Is your profile aligned to the following list of skills? Apply! We are looking forward to getting to know you: • Education: Aeronautical, Electrical, or Industrial Engineering degree, or a related technical discipline., • Experience: Around 5 years of professional experience in engineering and design activities, ideally with a strong focus on FTI., • Technical knowledge: Professional proficiency in CATIA V5. Knowledge of 3DX, SEE-XP, and Capital Logic is highly desirable., • Soft skills: High adaptability to work on new technical topics, capability to navigate new business opportunities, and a strong collaborative mindset to work in a networking mode., • Languages: Advanced level of English (written and spoken)., • Valuable / Nice to have: Previous experience in manufacturing engineering will be highly valued. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: • Vacation days plus additional days-off along the year., • Attractive salary., • Hybrid model of working when possible, promoting the work-life balance., • Collective transport servic e in some sites., • Benefits such as health insurance, employee stock options, retirement plan, or study grants ., • On-site facilities (among others): free canteen, kindergarten, medical office., • Possibi lity to collaborate in different social and corporate social responsibility initiatives., • Excellent upskilling opportunities and great development prospect s in a multicultural environ ment., • Special rates in products & benefits, • #MYCYM This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: At Airbus Defense and Space, the domain 'Integration Test & Analysis' in Spain is looking for additional staff in the perimeter of Avionics & Mission Systems area supporting Lab & Rig Integration Test activities. The successful applicant will become part of the team based in Getafe (although depending on program workload it may also require support to testing activities during short-mid periods of time in other sites as Manching). The scope of responsibility covers from the test requirements gathering and assessment in order to define the integrated tests procedures and test plan; the execution of the tests procedures and final results analysis and reporting. The tests support covers from development up to certification and qualification of the systems. As of today, the main customers are the current aircraft programs A330 MRTT, A400M, C295, Eurofighter, SIRTAP, TDMS and Tornado, but in the very near future EuroMale, NGF and FCAS will also be part of it. We are currently looking for a Test Specialist (mainly devoted to Avionics & Mission), within Integration Test & Analysis scope, for the Spanish perimeter at Getafe site, who will help us to prepare, support, execute, analyze and report all related integration test activities on sub-system/system level for avionics and mission integration scope in accordance with the requirements of the program-specific V&V plans in a technical work environment with continuously increasing complexity. If you have a technical background as engineer with testing competences, and also feel comfortable in the technical coordination tasks among test center domains, and relevant design offices, take advantage of this unique opportunity for a very varied, interesting and challenging job. • MAIN ACTIVITIES *, • Support department project coordinators and Test specialists to prepare, execute integration test on ground on the aircraft, support flight test execution and derive required reporting and data analysis., • Support Test Specialist to prepare the contribution to the Integrated Test Team forum within the scope of the activities., • Support for development, certification and qualification lab/rig testing activities according to Test Program requirements. Ensure & support appropriate V&V strategy for these activities. Follow-up of test progress., • Participate in the elaboration of Test planning; Review, optimize and challenge Test Requests., • Interface with DO, AW and certification authorities, supporting test activities on certification meetings when required, write Certification/Qualification Cards and test plans and Certification/Qualification Test Reports., • Interface and coordination with Test Integrators, Design Offices, Chief Engineering Office and Program Offices. Provide expertise to system architecture and design definition for Avionics & Mission Systems integration, • Identify, categorize, track and analyse system misbehaviours, providing the detailed information and associated impact to the designer, • Optimize test data analysis methodologies and procedures and manage priorities., • REQUIRED SKILLS * We are looking for candidates with at least 5 years of experience in Integration Testing (RIG/LAB Level) any AVS/MISSION systems, and the following skills and experience: • Knowledge of Integration & Tests route map, • Highly focused in complying with timescales and milestones, • Open minded to offer new ideas for improving processes and tools., • Available for travel and be prepared to work in several locations., • Any official Formation in Integration and Test will be valued, • Technical negotiation level in English and Spanish., • Competences related to Human Factors will be appreciated, • NATO SECRET will be valued!, • WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? * At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: • Vacation days plus additional days-off along the year., • Attractive salary., • Hybrid model of working when possible, promoting the work-life balance., • Collective transport service in some sites., • Benefits such as health insurance, employee stock options, retirement plan, or study grants., • On-site facilities (among others): free canteen, kindergarten, medical office., • Possibility to collaborate in different social and corporate social responsibility initiatives., • Excellent upskilling opportunities and great development prospects in a multicultural environment., • Special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: At Airbus Defense and Space, the domain 'Integration Test & Analysis' in Spain is looking for additional staff in the perimeter of Avionics & Mission Systems area supporting Lab & Rig Integration Test activities. The successful applicant will become part of the team based in Getafe (although depending on program workload it may also require support to testing activities during short-mid periods of time in other sites as Manching). The scope of responsibility covers from the test requirements gathering and assessment in order to define the integrated tests procedures and test plan; the execution of the tests procedures and final results analysis and reporting. The tests support covers from development up to certification and qualification of the systems. As of today, the main customers are the current aircraft programs A330 MRTT, A400M, C295, Eurofighter, SIRTAP, TDMS and Tornado, but in the very near future EuroMale, NGF and FCAS will also be part of it. We are currently looking for a Test Specialist (mainly devoted to Avionics & Mission), within Integration Test & Analysis scope, for the Spanish perimeter at Getafe site, who will help us to prepare, support, execute, analyze and report all related integration test activities on sub-system/system level for avionics and mission integration scope in accordance with the requirements of the program-specific V&V plans in a technical work environment with continuously increasing complexity. If you have a technical background as engineer with testing competences, and also feel comfortable in the technical coordination tasks among test center domains, and relevant design offices, take advantage of this unique opportunity for a very varied, interesting and challenging job. MAIN ACTIVITIES Support department project coordinators and Test specialists to prepare, execute integration test on ground on the aircraft, support flight test execution and derive required reporting and data analysis. Support Test Specialist to prepare the contribution to the Integrated Test Team forum within the scope of the activities. Support for development, certification and qualification lab/rig testing activities according to Test Program requirements. Ensure & support appropriate V&V strategy for these activities. Follow-up of test progress. Participate in the elaboration of Test planning; Review, optimize and challenge Test Requests. Interface with DO, AW and certification authorities, supporting test activities on certification meetings when required, write Certification/Qualification Cards and test plans and Certification/Qualification Test Reports. Interface and coordination with Test Integrators, Design Offices, Chief Engineering Office and Program Offices. Provide expertise to system architecture and design definition for Avionics & Mission Systems integration Identify, categorize, track and analyse system misbehaviours, providing the detailed information and associated impact to the designer Optimize test data analysis methodologies and procedures and manage priorities. REQUIRED SKILLS We are looking for candidates with at least 5 years of experience in Integration Testing (RIG/LAB Level) any AVS/MISSION systems, and the following skills and experience: Knowledge of Integration & Tests route map Highly focused in complying with timescales and milestones Open minded to offer new ideas for improving processes and tools. Available for travel and be prepared to work in several locations. Any official Formation in Integration and Test will be valued Technical negotiation level in English and Spanish. Competences related to Human Factors will be appreciated NATO SECRET will be valued! WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport service in some sites. Benefits such as health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. * Special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for a Methods & Tools Software Developer Engineer has arisen within Airbus Defence and Space, Getafe (Madrid). The selected candidate will join the Data Processing and Analysis Development group within the Ground Station Team, as part of the Flight and Integration Test Centre. You will be responsible for developing, optimizing, and maintaining the software ecosystem used by Test and System Specialists to perform data analysis across key Airbus Defence & Space programs (including A330 MRTT, A400M, C295, Eurofighter, SIRTAP, and Eurodrone). In this role, you will act as a bridge between the Analysis Community in Spain and the Ground Station team, offering direct technical support across diverse domains such as Avionics, Mission, Performance, Handling Qualities, Powerplant, General Systems, Aerial Delivery, and Datalinks. RESPONSIBILITIES Design, implement, and maintain software tools used by Test Centre Analysis Teams to process and analyze test data. Collaborate closely with specialized Test Analysis groups to translate complex mathematical models into functional, efficient software tools. Shape the future technology stack for Analysis Tools by guiding the migration and integration of the current toolset into the new Time Series Analysis Tool Platform for Military (TSASM). Act as the main technical point of contact between the Ground Station Team and the Spanish Analysis Community, facilitating constant communication and specialized tool support. SKILLS Is your profile aligned to the following list of skills? Apply! We are looking forward to know you: Education: Bachelor’s or Master’s degree in Aeronautical Engineering, Aerospace Engineering, or a related discipline with a focus on scientific computing. Technical knowledge: Strong programming knowledge of MATLAB for scientific applications. Proficiency in Python and its core data analysis libraries (NumPy, Pandas, SciPy, Matplotlib, and Jupyter ecosystem). Knowledge of CI/CD tools (Git mandatory, Jenkins and Nexus desirable) and Agile methodologies (Jira, Confluence). Deep interest in scientific programming with the ability to implement mathematical equations into efficient code. Languages: Advanced level in English (both written & spoken); Spanish capability is desirable for local team coordination. Soft skills: Excellent interpersonal and communication skills with the ability to translate complex software concepts to non-software engineers and vice versa. Valuable / Nice to have: Experience with compiled languages (Fortran 77/90, C++) or willingness to learn them, as well as familiarity with Python libraries like SimPy and Numba. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport service in some sites. Benefits such as health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environ ment. Special rates in products & benefits. #MYCYM This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: Are you passionate about the intersection of aeronautical engineering and software development? We are seeking a highly motivated Methods & Tools Software Developer engineer to join the Data Processing and Analysis Development group within Ground Station Team as part of the Flight and Integration Test Centre You will be responsible for developing, optimizing, and maintaining the software ecosystem used by the Test/System Specialists to perform their analysis of Rig/Benches/Ground/Flight tests data. Additionally, you will act as a bridge between the Analysis Community in the Spanish perimeter and Ground Station in terms of tools and infrastructure, ensuring direct communication and providing technical support. In this role, you will contribute to all current Airbus Defence & Space programs-including A330 MRTT, A400M, C295, Eurofighter, SIRTAP, Eurodrone-while developing analysis tools and providing technical support to multiple areas - ranging from Avionics and Mission, Performance, Handling Qualities, Powerplant, General systems, Aerial Delivery, Datalinks... RESPONSIBILITIES - Tool Development & Maintenance: Design, implement, and maintain software tools to - be used by the Test Centre Analysis Teams. - Interdisciplinary Collaboration: Work closely with specialized Test Analysis groups - (Performance, Handling Qualities, Avionics and Mission, Aerial Delivery, etc), to - translate and integrate their mathematical models into functional software tools. - Shape the Future: Play a key role in the definition of the future technology stack for - Analysis Tools, ensuring the migration and integration of our current toolset into the - new Time Series Analysis Tool Platform for Military (TSASM). - Cross-Functional Liaison: Act as a technical point of contact between the Ground - Station Team and the Analysis Community in Spain, ensuring a constant - communication and providing support related to Analysis Tools when needed. SKILLS - Educational background: Bachelor’s or Master’s degree in Aeronautical Engineering or - Aerospace Engineering with a focus on scientific computing. - Programming Expertise: - Strong knowledge of MATLAB for scientific applications. - Proficiency in Python, with deep experience in core data analysis libraries such as NumPy, Pandas, SciPy, Matplotlib, and the Jupyter ecosystem. Familiarity with other Python libraries like SimPy and Numba is highly desirable. - Experience compiled languages, Fortran 77/90 and C++, or a strong willingness to learn them. o CI/CD: Git mandatory, Jenkins and Nexus desirable. - Methodologies: Experience working in Agile environments using Jira and Confluence. - Analytical Mindset: A deep interest in scientific programming and the ability to - implement mathematical equations into efficient code. - Communication: Excellent interpersonal skills with the ability to communicate - technical software concepts to non-software engineers (and vice versa). - Language Skills: English advanced. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: - Vacation days plus additional days-off along the year. - Attractive salary. - Hybrid model of working when possible, promoting the work-life balance. - Collective transport service in some sites. - Benefits such as health insurance, employee stock options, retirement plan, or study grants. - On-site facilities (among others): free canteen, kindergarten, medical office. - Possibility to collaborate in different social and corporate social responsibility initiatives. - Excellent upskilling opportunities and great development prospects in a multicultural environment. - Special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for an FTI Installation Design Engineer has arisen within Airbus Defence and Space in Getafe (Madrid). By joining the Flight Test Installation (FTI) Design Team, you will become part of a highly multidisciplinary and multicultural department. We are responsible for designing the critical flight test installations and instrumentation required for aircraft Certification, Qualification, Testing, and continuous product improvement. In this role, you will play a key part in both electrical and mechanical design, directly reinforcing our team in the definition and implementation of complex FTI installations across key Airbus Defence & Space Programs. RESPONSIBILITIES The main tasks and deliverables of the jobholder will include: Design and integrate electrical system installations and functional electrical architectures. Prepare and release detailed wiring diagrams and electrical routing definitions. Develop and integrate mechanical system installations and structural design solutions for FTI. Manage and maintain strict configuration control of all designed installations and modifications. Coordinate subcontractor activities, performing technical follow-ups and ensuring quality and on-time delivery. Support project management by contributing to planning elaboration and budget control activities. SKILLS Is your profile aligned to the following list of skills? Apply! We are looking forward to getting to know you: Education: Aeronautical, Electrical, or Industrial Engineering degree, or a related technical discipline. Experience: Around 5 years of professional experience in engineering and design activities, ideally with a strong focus on FTI. Technical knowledge: Professional proficiency in CATIA V5. Knowledge of 3DX, SEE-XP, and Capital Logic is highly desirable. Soft skills: High adaptability to work on new technical topics, capability to navigate new business opportunities, and a strong collaborative mindset to work in a networking mode. Languages: Advanced level of English (written and spoken). Valuable / Nice to have: Previous experience in manufacturing engineering will be highly valued. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport servic e in some sites. Benefits such as health insurance, employee stock options, retirement plan, or study grants . On-site facilities (among others): free canteen, kindergarten, medical office. Possibi lity to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospect s in a multicultural environ ment. Special rates in products & benefits #MYCYM This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description:An opportunity for an FTI Installation Design Engineer has arisen within Airbus Defence and Space in Getafe (Madrid).By joining the Flight Test Installation (FTI) Design Team, you will become part of a highly multidisciplinary and multicultural department. We are responsible for designing the critical flight test installations and instrumentation required for aircraft Certification, Qualification, Testing, and continuous product improvement. In this role, you will play a key part in both electrical and mechanical design, directly reinforcing our team in the definition and implementation of complex FTI installations across key Airbus Defence & Space Programs.RESPONSIBILITIESThe main tasks and deliverables of the jobholder will include:- Design and integrate electrical system installations and functional electrical architectures.- Prepare and release detailed wiring diagrams and electrical routing definitions.- Develop and integrate mechanical system installations and structural design solutions for FTI.- Manage and maintain strict configuration control of all designed installations and modifications.- Coordinate subcontractor activities, performing technical follow-ups and ensuring quality and on-time delivery.- Support project management by contributing to planning elaboration and budget control activities.SKILLSIs your profile aligned to the following list of skills? Apply! We are looking forward to getting to know you:- Education: Aeronautical, Electrical, or Industrial Engineering degree, or a related technical discipline.- Experience: Around 5 years of professional experience in engineering and design activities, ideally with a strong focus on FTI.- Technical knowledge: Professional proficiency in CATIA V5. Knowledge of 3DX, SEE-XP, and Capital Logic is highly desirable.- Soft skills: High adaptability to work on new technical topics, capability to navigate new business opportunities, and a strong collaborative mindset to work in a networking mode.- Languages: Advanced level of English (written and spoken).- Valuable / Nice to have: Previous experience in manufacturing engineering will be highly valued.WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE?At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits:- Vacation days plus additional days-off along the year.- Attractive salary.- Hybrid model of working when possible, promoting the work-life balance.- Collective transport servic e in some sites.- Benefits such as health insurance, employee stock options, retirement plan, or study grants .- On-site facilities (among others): free canteen, kindergarten, medical office.- Possibi lity to collaborate in different social and corporate social responsibility initiatives.- Excellent upskilling opportunities and great development prospect s in a multicultural environ ment.- Special rates in products & benefits- #MYCYMThis job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.Company:Airbus Defence and Space SAUEmployment Type:Permanent-------Experience Level:ProfessionalJob Family:TestingBy submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com .At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for a Flight Physics PMTD Leader has arisen within Airbus Defence and Space, Getafe (Madrid). The selected candidate will join the Technology & Capability team within the Integration and Strategy domain (TADGI), which is a German-Spanish engineering organization in Airbus Defence and Space - Air Power Engineering. The organization is responsible for the flight physics deliverables for all Air Power programmes and digitalization & technology. As Flight Physics PMTD Leader, you will apply your knowledge and experience in process, methods and tool development (PMTD) to push Flight Physics capabilities to make the program a success. This would be done ensuring the next level of digitalization and advanced technologies and capabilities for the program. With this, you will contribute to increase efficiency, effectiveness and competitiveness of Flight Physics CoC established in the Flight Physics Technology and Digital strategies. RESPONSIBILITIES Manage the Flight Physics Process, Methods, Tools and Data (PMTD) portfolio for an specific program. Special focus will need to be put on the CoC deliveries for the program are executed on time, cost and quality. Drive the Flight Physics PMT process convergence and execute it in the agreed terms to ensure PMTD gaps and needs are fully managed. Reflect on the ways of working and continuously improve as needed for the program success. Lead the PMTD Integrated Product Team (IPT) - Flight Physics to ensure Flight Physics activities and priorities are captured by TAXD. Drive the Digital transformation of Flight Physics by coordinating transverse initiatives that push Air Power competitiveness and especially for the program efficiency. A non-complete list includes Air Power Digital Chapter and Digital Strategies. Become the Flight Physics interface to TAX, Digital and TADX. Ensure process and document referential management aligning with internal and external flight physics stakeholders for the program. Development of integrated solutions to support the end-to-end processes digitalization and digital transformation of Air Power - Engineering with special focus on the program. Develop, prove, validate and deploy disruptive ways of solving problems in flight physics with a holistic approach that can grow the competitiveness of the program. Challenge the status quo. SKILLS Is your profile aligned to the following list of skills? Apply! We are looking forward to know you: Education: University degree in engineering, computer science, mathematics or equivalent. Experience: At least 3 years professional experience in programming & data science in development and engineering areas. Specifically: Experience on Flight Physics and Overall Aircraft development process and engineering activities. Experience in managing projects in a complex and international environment. Soft skills: C ommunication and influencing skills to be an effective leader are required for this position. Especially important: Aligning and convincing both internal and external flight physics stakeholders. Languages: Advanced level in English & Spanish (both written and spoken). Additionally valued competences: PMP or other project management accreditation would be a plus. System Engineering and Model Based System Engineering would be a plus Experience on continuous improvement and relevant process management experience are a plus. Especially Green or Black belt certifications would be appreciated. Previous experience in Machine learning modeling for Engineering applications would be a plus. Previous experience in Python and C++ and state-of -the art data science and AI frameworks are a plus. Previous experience with front end and database development would be a plus Previous experience on CFD & FEM would be a plus. Previous experience on High Performance Computing and Linux server administration would be a plus. Strong desire to work, learn and grow as part of a digitalization and technology team. WHICH BENEFITS WILL YOU HAVE AS AN AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport service subject to working calendar/home location. Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. Option to access special rates in products & benefits. #MYCYM This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Flight & Space Physics By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description:At Airbus Defense and Space, the domain 'Integration Test & Analysis' in Spain is looking for additional staff in the perimeter of Avionics & Mission Systems area supporting Lab & Rig Integration Test activities. The successful applicant will become part of the team based in Getafe (although depending on program workload it may also require support to testing activities during short-mid periods of time in other sites as Manching).The scope of responsibility covers from the test requirements gathering and assessment in order to define the integrated tests procedures and test plan; the execution of the tests procedures and final results analysis and reporting.The tests support covers from development up to certification and qualification of the systems.As of today, the main customers are the current aircraft programs A330 MRTT, A400M, C295, Eurofighter, SIRTAP, TDMS and Tornado, but in the very near future EuroMale, NGF and FCAS will also be part of it.We are currently looking for a Test Specialist (mainly devoted to Avionics & Mission), within Integration Test & Analysis scope, for the Spanish perimeter at Getafe site, who will help us to prepare, support, execute, analyze and report all related integration test activities on sub-system/system level for avionics and mission integration scope in accordance with the requirements of the program-specific V&V plans in a technical work environment with continuously increasing complexity. If you have a technical background as engineer with testing competences, and also feel comfortable in the technical coordination tasks among test center domains, and relevant design offices, take advantage of this unique opportunity for a very varied, interesting and challenging job.MAIN ACTIVITIES- Support department project coordinators and Test specialists to prepare, execute integration test on ground on the aircraft, support flight test execution and derive required reporting and data analysis.- Support Test Specialist to prepare the contribution to the Integrated Test Team forum within the scope of the activities.- Support for development, certification and qualification lab/rig testing activities according to Test Program requirements. Ensure & support appropriate V&V strategy for these activities. Follow-up of test progress.- Participate in the elaboration of Test planning; Review, optimize and challenge Test Requests.- Interface with DO, AW and certification authorities, supporting test activities on certification meetings when required, write Certification/Qualification Cards and test plans and Certification/Qualification Test Reports.- Interface and coordination with Test Integrators, Design Offices, Chief Engineering Office and Program Offices. Provide expertise to system architecture and design definition for Avionics & Mission Systems integration- Identify, categorize, track and analyse system misbehaviours, providing the detailed information and associated impact to the designer- Optimize test data analysis methodologies and procedures and manage priorities.REQUIRED SKILLSWe are looking for candidates with at least 5 years of experience in Integration Testing (RIG/LAB Level) any AVS/MISSION systems, and the following skills and experience:- Knowledge of Integration & Tests route map- Highly focused in complying with timescales and milestones- Open minded to offer new ideas for improving processes and tools.- Available for travel and be prepared to work in several locations.- Any official Formation in Integration and Test will be valued- Technical negotiation level in English and Spanish.- Competences related to Human Factors will be appreciated- NATO SECRET will be valued!WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE?At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits:- Vacation days plus additional days-off along the year.- Attractive salary.- Hybrid model of working when possible, promoting the work-life balance.- Collective transport service in some sites.- Benefits such as health insurance, employee stock options, retirement plan, or study grants.- On-site facilities (among others): free canteen, kindergarten, medical office.- Possibility to collaborate in different social and corporate social responsibility initiatives.- Excellent upskilling opportunities and great development prospects in a multicultural environment.- Special rates in products & benefits.This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.Company:Airbus Defence and Space SAUEmployment Type:Permanent-------Experience Level:ProfessionalJob Family:TestingBy submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com .At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description:The job holder will be part of Planning and Production Control Team in Retrofit and will be in charge of the following task to support Retrofit Aircraft Delivery On Time, On Cost and On Quality.RESPONSABILITIES- Take part in MFTs in charge of preparing retrofit events in Getafe.Provide unique interface with TASM for material management.Preparation and report of missing parts status per MSN.- Timely escalation of missing parts with high impact (critical path) on retrofit process.- Provide missing part analysis per subsidiary to planning to ensure the proper alignment between missing part status and operative planning.- Support finding process and resolution. Provide quotation and availability of material if needed.Maintain / Update expendables safety stock in accordance with programs.- E2E consumable flow management.- Deliver to shopfloor station barchart and updates including inflow and findings.- Define, create, maintain and provide visibility of KPIs needed for Retrofit Management.- Support to Production for KPI assessment and decision making.Dashboard creation and update.- Timely generation of planning simulations for new inputs or deviations.Program Main Milestones follow up.- Create and update the platform to manage and visualize work on shopfloor.- Support to production / quality for work preparation and task sequence.- Load Capacity Analysis / Control and track headcount (targets, movements...).- Support to production to solve issues under cost perimeter.- Responsible for Retrofit Tactical Plan Update and Follow up.UP Management and Update.- Simulate different scenarios for MRO/Retrofit Getafe.SKILLS- We are looking for candidates with the following skills and experience:- Knowledge of retrofit, services processes, functions (finance, program HR, procurement, operations etc.) and IT tools (SAP, Pelícano, etc.) would be an asset.- Good communication skills.Outstanding organizational and leadership skills.- Organized & StructuredLanguages: English mandatory- Academic education: University degreeWHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a lookat some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Collective transport service in somesites. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporatesocial responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment.WANT TO KNOW MORE ABOUT US? #AirbusDiversity Airbus is a leader in designing, manufacturing and delivering aerospace products, services andsolutions to customers on a worldwide scale, pioneering sustainable aerospace for a safe and united world. With around 130,000 employeesand as the largest aeronautics and space company in Europe and a worldwide leader, Airbus is at the forefront of the aviation industry,connecting people and places via air and space. At Airbus, we support you to work, connect and collaborate more easily and flexibly.Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Last but not least, the company has beenawarded with the “Top Employers Spain 2023” certification and "Top Employers Europe 2023" by Top Employers Institute.This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.Company:Airbus Defence and Space SAUEmployment Type:Agency / Temporary-------Experience Level:ProfessionalJob Family:Production Planning & SchedulingBy submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com .At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: New positions has arisen as an A400M MRO Network maintenance B1 or/and B2 technician has arisen within Airbus Defence & Space. This position is based at Zaragoza (Spain) Military Air Base, and as such you must be available to work full time in this place. Working as part of an Airbus D&S Resident Team within the A400M MRO Network, will include the performance and certification of these tasks, including supervision and certification of unlicensed mechanics tasks. This service will take place at the mentioned Main Operating Base of the customer. This position will require a security clearance or will require being eligible for clearance by the recognized authorities. RESPONSIBILITIES Your main tasks and responsibilities will include: Be responsible for performing and certification of both scheduled and unscheduled tasks previously agreed with the customer by Customer Services. SB implementation: modifications not performed at FAL or appearing after the delivery of the A/C, and from support asked by the Customer for different kind of repairs or maintenance tasks. Manage small groups of non-licensed mechanics in the performance of maintenance activities and coordination and supervision their OJT, if needed Be involved in the setting up of working processes and practices. Be involved in all aspects of technical support of a new advanced military transport aircraft. SKILLS EASA or EMAR Part 66 license. Theoretical training without basic 3 years experience would be also valid under particular circumstances. Type rating included will be a plus Experienced working according SB and AMM documentation Experience in MRO on a modern digital aircraft: A380, A350 etc. Strong interpersonal and communication skills. Independent user in English and Spanish WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport service in some sites. Benefits such as health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. Special rates in products & benefits. #LMA This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Production means/Maintenance By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description:We are looking for a Mechanical Engineer with experience in the space industry to cover the role of AIT Thermo-mechanical Lead of Payload Products.The AIT Thermo-mechanical Lead position presents an exciting opportunity to take on a technical leadership role and provide a robust end-to-end integration process, time and cost optimized for implementation into production.The Payload Product Lead is a dynamic and essential role that deals with project daily challenges, change of priorities and resolving blocking actions to ensure schedule adherence, yet, maintaining quality and costs.We invite you to join a multi-skilled and highly engaged team of Engineers working on one of the top companies of the Space Industry.The Payload Product Lead works together in leadership with the AIT Manager inside Operations TOM.Works on cross multi-functional teams with:- AIT Engineering Teams: Mechanical, Thermal, Antennas and Harness Engineering Project Teams.- MFT leads and Product Owners- Project Management Team- M&P- Product Assurance Team (PA)- Supply ChainGeneral Responsibilities- The Payload Product Lead is the AIT thermo-mechanical project focal point, providing Technical Lead and Expertise. Providing technical lead to the Build Process definition ensuring a correct & consistent process definition for the shopfloor.- Liaises with management over manpower and budgets as necessary.- Provides regular feedback to management on current progress, workings and issues on behalf of the team.- Offers support to management with regards to team/department strategies or any other topics as needed- Support/mentor apprentices and new starters in to the team to foster new talent.During the Project Design Phase:- Attends and/or support all project meetings / reviews- Attends and/or support the PFMA, DMU review, Project Concurrent MFTs with Design Engineering, Industrial Means, Quality and Production.- Attends inputs preparation meeting to define and ensure KIDs for product / project are fit for Manufacture (DFM)- Define/Supports the Build Process, re-enforce and ensure a correct & consolidated process definition:- Industrial Product definition in the context of Collaborative Engineering: product (part detail definition), processes (manufacturing and assembly) and Industrial Means detail definition. Detailed simulation of the process (precedents, restrictions, areas, etc.)- Final tolerance analysis: tolerance stack-up analysis, CIs & KC´s.- Update & agreement of the final Product Structure (As-Planned).- Update and agreement of specifications for Delivered Components (delivery conditions) and work specifications.- Build Process Consolidation and agreement with relevant stakeholders and production area.- Provides Inputs to Industrial Planning: Build process (precedents, restrictions, areas, etc.) balancing, adjustment of process times and skills and estimated lead times.- Provides Inputs of recurring & non-recurring costs associated with the industrial model.- Provides Supplier Industrialization Support:- Technical support for the Manufacture/Purchase strategy.- Technical management in the development of supplier work packages- Technical management of bids, and selecting and contracting products (parts, assemblies, groups) from suppliers.- Manages the creation of the Industrialization documentation (Built Process studies / Process Flows & Budget / Supplier WPs...)AIT DocumentationManages the creation of:- BOM preparation (As-Prepared) - Update As-prepared BOM with auxiliary materials and flight & non-flight material quantities.- Routing preparation (As-Prepared) - Create & update complete routings for standard activities and viability tests / qualification / process preparation.- Internal (Procedures, Work instructions, Technical Instructions, data collection documents, numerical control programs, critical- movement...) and External documentation (user manuals)- MRR / IRR Datapack: Routing & applicable documentation (instructions & documentation)- Update Inputs to Industrial Planning: Build process (precedents, restrictions, areas, etc.) balancing, adjustment of process times and skills and estimated lead times.- Update Inputs of recurring & non-recurring costs associated with the industrial model.During the Execution- Attends and/or supports SQCD Panels Daily meetings at shopfloor, PPS meetings, Schedule reviews and Recovery Plans.- Provides Technical shopfloor support:- Follow up execution of shopfloor activities- Support to operation (applicable documentation understanding, specific analysis....)- Configuration and improvement of the design of the product, the industrial process and resources.- Technical support for pending work: impact reduction and technical solutions- Methods and processes support- Provides timely feedback to appropriate managers on process engineering issues.- Reviews of real recurring & non-recurring costs and Identify / analyse deviations.- Maintenance of Applicable documentation (Procedure, Work instructions, Technical Instructions, Procedures, Data collection documents...)- Supports Assessment of Non-Conformances. Track & Answer Non-Conformance Process Flow.- Hosts and Supports Lessons Learned exercises at key milestones involving all key stakeholders in phase.This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.Company:Airbus Defence and Space SAUEmployment Type:Permanent-------Experience Level:ProfessionalJob Family:Manufacturing EngineeringBy submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com .At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for a Flight Test Instrumentation Engineer has arisen within Airbus Defence and Space, Getafe (Madrid). The selected candidate will join the Flight Tests Instrumentation Architecture & Equipment Team, whose mission is to provide flight test means to gather critical data from aircraft test objects for further evaluation. Our capabilities span special onboard systems, rapid troubleshooting, sensors and metrology, data acquisition, telemetry, and onboard manufacturing. You will be part of a multidisciplinary and multicultural team responsible for the full life cycle of Flight Test Instrumentation (FTI) installations for the Airbus Derivatives (MRTT) Program-from conception and equipment integration to final deployment. RESPONSIBILITIES Design and define Flight Test Instrumentation (FTI) installations onboard Flight Test Aircraft for the MRTT program, analyzing requirements to specify and provide complete FTI systems (hardware, software, and digital systems). Prepare and document technical FTI documentation for Aircraft Installation Design Offices and FTI Laboratory Facilities in compliance with quality, cost, and time standards. Coordinate and manage end-to-end FTI activities with key stakeholders, including budget, export control, stock, spare parts, and Verification & Validation (V&V) tasks. Support in-service operations by investigating and solving technical anomalies, ensuring smooth operations throughout the development phase. Evaluate and implement Make or Buy processes alongside new instrumentation technologies to meet future project demands. SKILLS Is your profile aligned to the following list of skills? Apply! We are looking forward to know you: Education: Degree in Electronics, Aeronautics, Telecommunications Engineering, or a related discipline. Experience: Proven experience in testing activities and solid expertise in data acquisition systems for analog, digital, and bus signals. Soft skills: High adaptability, proactivity in problem-finding and proposing solutions, strong team spirit, organized profile, and effective negotiation and communication capabilities in a multicultural environment. Languages: Advanced level in English (both written & spoken); Spanish capability is desirable. Technical knowledge: Proficiency in configuration of network devices (routers, switches) and WAN/LAN protocol stacks (TCP/UDP, IP, PTP, SNMP, Ethernet). Hands-on experience with Telemetry equipment (transmitters, antennas, amplifiers, calibration) and Global Navigation Satellite Systems. Knowledge of Radio Frequency chains and Network Simulation & Analysis tools (Wireshark, IPerf). High capability to analyze and understand the behavior of electronic devices and digital protocols. Valuable / Nice to have: Programming skills in LUA, LabVIEW, or Python; familiarity with Airbus documentation and tools (NRD, A400M FTI Block Diagrams, Drawing Information Sheets, Sabre, Sabre Criev, STILo, N-Show, RODAS, EPD, TLB, FTI databases, DOORS). WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport service in some sites. Benefits such as health insurance, employee stock options, retirement plan, or study grants . On-site facilities (among others): free canteen, kindergarten, medical office. Possibi lity to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a mult icultural environ ment. Special rates in products & benefits. #MYCYM This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: The main tasks and responsibilities include: Radio system integration in EF2000 platform. Involvement in other Airbus DS Military Aircraft platforms (C295, MRTT, A400M, ED, SIRTAP) Allocating aircraft requirements to a Communications System. Defining the architecture and specifications of the Communications system. Elaborating engineering design documentation. Being responsible of Communications system design, integration, qualification and certification. Supporting feasibility studies for new products/user needs, etc. Supplier technical management Supporting the whole design process including design review meetings Supporting to meetings with end customer Supporting Certification and Qualification process. Supporting Technical Publications (AFM, FCOM, etc.) Supporting transversal areas such as Services, Production, Procurement, etc. Supporting test campaign sequencing, test procedures & facilities. Monitoring and supporting tests and perform real-time analysis of test results. Contribution to R&T programs related to SDR/SCA Radios. Being at the state of the art of international regulations: ICAO, FAA, EASA, EUROCONTROL, etc. The required skills and experience to fit in this role are: Telecommunications Engineering degree or similar 3 years of experience in systems engineering or development of avionics system. Good knowledge of Communication Functions in other platforms. Background knowledge: Inmarsat/Iridium Satcom, Radios (V/UHF, VHF, HF), Civil Datalink (FANS, CPDLC). International project experience. Strong English and Spanish skills Good communication skills and pro-active approach to problem solving. Ability to work under strict timescales as part of an integrated and multifunctional team. Assertiveness. Open minded and active to new challenges. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days and additional days-off along the year (+35 working days off in total). Attractive salary and compensation package. Hybrid model of working when possible, promoting the work-life balance Collective transport service in some sites. Benefits such as health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. Special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Computing&Comm and Info& Data Processing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: An opportunity for a Flight Test Instrumentation Engineer has arisen within Airbus Defence and Space, Getafe (Madrid). The selected candidate will join the Flight Tests Instrumentation Architecture & Equipment Team, whose mission is to provide flight test means to gather critical data from aircraft test objects for further evaluation. Our capabilities span special onboard systems, rapid troubleshooting, sensors and metrology, data acquisition, telemetry, and onboard manufacturing. You will be part of a multidisciplinary and multicultural team responsible for the full life cycle of Flight Test Instrumentation (FTI) installations for the Airbus Derivatives (MRTT) Program-from conception and equipment integration to final deployment. RESPONSIBILITIES Design and define Flight Test Instrumentation (FTI) installations onboard Flight Test Aircraft for the MRTT program, analyzing requirements to specify and provide complete FTI systems (hardware, software, and digital systems). Prepare and document technical FTI documentation for Aircraft Installation Design Offices and FTI Laboratory Facilities in compliance with quality, cost, and time standards. Coordinate and manage end-to-end FTI activities with key stakeholders, including budget, export control, stock, spare parts, and Verification & Validation (V&V) tasks. Support in-service operations by investigating and solving technical anomalies, ensuring smooth operations throughout the development phase. Evaluate and implement Make or Buy processes alongside new instrumentation technologies to meet future project demands. SKILLS Is your profile aligned to the following list of skills? Apply! We are looking forward to know you: Education: Degree in Electronics, Aeronautics, Telecommunications Engineering, or a related discipline. Experience: Proven experience in testing activities and solid expertise in data acquisition systems for analog, digital, and bus signals. Soft skills: High adaptability, proactivity in problem-finding and proposing solutions, strong team spirit, organized profile, and effective negotiation and communication capabilities in a multicultural environment. Languages: Advanced level in English (both written & spoken); Spanish capability is desirable. Technical knowledge: Proficiency in configuration of network devices (routers, switches) and WAN/LAN protocol stacks (TCP/UDP, IP, PTP, SNMP, Ethernet). Hands-on experience with Telemetry equipment (transmitters, antennas, amplifiers, calibration) and Global Navigation Satellite Systems. Knowledge of Radio Frequency chains and Network Simulation & Analysis tools (Wireshark, IPerf). High capability to analyze and understand the behavior of electronic devices and digital protocols. Valuable / Nice to have: Programming skills in LUA, LabVIEW, or Python; familiarity with Airbus documentation and tools (NRD, A400M FTI Block Diagrams, Drawing Information Sheets, Sabre, Sabre Criev, STILo, N-Show, RODAS, EPD, TLB, FTI databases, DOORS). WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport service in some sites. Benefits such as health insurance, employee stock options, retirement plan, or study grants . On-site facilities (among others): free canteen, kindergarten, medical office. Possibi lity to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a mult icultural environ ment. Special rates in products & benefits. #MYCYM This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description:An opportunity for a SW Requirements and Test Engineer has arisen within Airbus Defence and Space, Getafe (Madrid ).Our world is changing. And so are we. From our commitment to zero-carbon flight (#ZEROe) to cleaning up space, sustainability is at the heart of our purpose. So what's your next change?Our team, “Airborne Connectivity” is part of the engineering function in Airbus Defence and Space, designing and developing products, hardware and software, providing connectivity and communications capabilities to our customers. These products are integrated as part of the solutions provided by two out of the three main programme lines in Airbus Defence and Space, Secure Communications in Connected Intelligence, and all military airborne platforms in Military Air Systems (Eurofighter, C295, MRTT, SIRTAP, Eurodrone, etc.)Be part of the future by making the next generation of high-integrity airborne real-time systems, paving the way for innovation in smart connectivity, distributed networking, and artificial intelligence adoption. You will take part in a high performance team that is involved in the complete lifecycle of the embedded software product, from building the SW requirements, to the final testing and target computer implementation. You should be able to lead and take responsibility on design/architectural decisions, as well as leading the development of specific projects.TRAVEL REQUIRED : Occasional travel within national and international areas (around 3-day trip).RESPONSIBILITIES- Define and document software requirements based on system functional specifications.- Develop comprehensive software verification test cases and procedures based on corresponding software requirements.- Establish and maintain traceability matrices between different levels of specifications and test cases.- Execute test cases, record results, and create detailed problem reports for any identified defects.- Manage and track problem reports through resolution, ensuring timely and effective communication with development teams.- Partner with product and program managers, system engineers, and validation teams to drive software products from conception to delivery.- Participate in the planning and scoping of team projects, providing input on requirements and testing efforts.- Support product owners and project managers in delivering high-quality software on time and within budget.- Promote innovation across the department by suggesting improvements in processes, tools, and methodologies.- Stay updated with industry best practices and emerging technologies in software requirements and testing.SKILLSRequired skills and qualifications:- Educated in software, IT, telecommunication, industrial engineering degree or a related discipline.- Expertise on real-time and/or embedded software development.- Expertise on defining SW requirements.- Expertise on software verification.- +3 years of experience- Fluent level of English and Spanish.Preferred skills and qualifications:- Knowledge of SW airworthiness certification processes: DO-178C, EFA Standards.- Awareness of cyber-security concepts and accreditation processes ( Common Criteria ).- Expertise on C/C++ and/or Ada programming languages and low-level development.- Experience on: system & SW design tools ( SysML, UML ), integrated development environment ( GPS, AdaMulti, Eclipse ), verification tools ( Vector Cast, AdaTest95 ).- Interest and ability to conciliate multiple perspectives regarding products, projects and processes.WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE?At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits:- Vacation days plus additional days-off along the year.- Attractive salary.- Hybrid model of working when possible, promoting the work-life balance.- Collective transport service subject to working calendar/home location.- Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants.- On-site facilities (among others): free canteen, kindergarten, medical office.- Possibility to collaborate in different social and corporate social responsibility initiatives.- Excellent upskilling opportunities and great development prospects in a multicultural environment.- Option to access special rates in products & benefits.This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.Company:Airbus Defence and Space SAUEmployment Type:Permanent-------Experience Level:ProfessionalJob Family:Software EngineeringBy submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com .At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: At Airbus Defense and Space, the domain 'Integration Test & Analysis' in Spain is looking for additional staff in the perimeter of Avionics & Mission Systems area supporting Lab & Rig Integration Test activities. The successful applicant will become part of the team based in Getafe (although depending on program workload it may also require support to testing activities during short-mid periods of time in other sites as Manching). The scope of responsibility covers from the test requirements gathering and assessment in order to define the integrated tests procedures and test plan; the execution of the tests procedures and final results analysis and reporting. The tests support covers from development up to certification and qualification of the systems. As of today, the main customers are the current aircraft programs A330 MRTT, A400M, C295, Eurofighter, SIRTAP, TDMS and Tornado, but in the very near future EuroMale, NGF and FCAS will also be part of it. We are currently looking for a Test Specialist (mainly devoted to Avionics & Mission), within Integration Test & Analysis scope, for the Spanish perimeter at Getafe site, who will help us to prepare, support, execute, analyze and report all related integration test activities on sub-system/system level for avionics and mission integration scope in accordance with the requirements of the program-specific V&V plans in a technical work environment with continuously increasing complexity. If you have a technical background as engineer with testing competences, and also feel comfortable in the technical coordination tasks among test center domains, and relevant design offices, take advantage of this unique opportunity for a very varied, interesting and challenging job. MAIN ACTIVITIES Support department project coordinators and Test specialists to prepare, execute integration test on ground on the aircraft, support flight test execution and derive required reporting and data analysis. Support Test Specialist to prepare the contribution to the Integrated Test Team forum within the scope of the activities. Support for development, certification and qualification lab/rig testing activities according to Test Program requirements. Ensure & support appropriate V&V strategy for these activities. Follow-up of test progress. Participate in the elaboration of Test planning; Review, optimize and challenge Test Requests. Interface with DO, AW and certification authorities, supporting test activities on certification meetings when required, write Certification/Qualification Cards and test plans and Certification/Qualification Test Reports. Interface and coordination with Test Integrators, Design Offices, Chief Engineering Office and Program Offices. Provide expertise to system architecture and design definition for Avionics & Mission Systems integration Identify, categorize, track and analyse system misbehaviours, providing the detailed information and associated impact to the designer Optimize test data analysis methodologies and procedures and manage priorities. REQUIRED SKILLS We are looking for candidates with at least 5 years of experience in Integration Testing (RIG/LAB Level) any AVS/MISSION systems, and the following skills and experience: Knowledge of Integration & Tests route map Highly focused in complying with timescales and milestones Open minded to offer new ideas for improving processes and tools. Available for travel and be prepared to work in several locations. Any official Formation in Integration and Test will be valued Technical negotiation level in English and Spanish. Competences related to Human Factors will be appreciated NATO SECRET will be valued! WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport service in some sites. Benefits such as health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. * Special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: About Highly Integrated Systems - TADYS As part of the newly established Highly Integrated Systems (HIS) domain within Aircraft Systems Centre of Competence (CoC), you will join the Computing Platforms & Multisystems HW/SW Integration group (TADYS2). HIS is the Multisystem and IMA Design Office and Airborne Computing Platforms responsible and centralizes expertise and competencies for driving architectural reuse, strategic alignment, and economies of scale across the CoC. Within this framework, the TADYS2 subdomain focuses on the standardization of embedded software and computing platforms. As a Senior Software Platform Integration Engineer, you will spearhead the CoC’s computing platforms strategy, ensuring the delivery of robust, certifiable, and high-performance software artifacts for computing platforms and you will be dealing with the HW/SW integration for multi-systems architectures, essential for the next generation of AirPower systems. Key responsibilities In this role, you will drive the integration and standardization of software platforms through the following pillars: Requirements & Design: Elicit and maintain Software Requirements Specifications (SRS) for onboard safety-critical computers. Design, develop, and perform Validation & Verification (V&V) of software artifacts in strict adherence to RTCA DO-178C (up to DAL-A). Platform Integration & Architecture: Lead the definition of full software platform architectures for multisystem computing platforms. This includes partitioning, scheduling, resource allocation, and the integration of third-party application and low-level software (RTOS BSPs, drivers, and middleware). Standardization & API Development: Drive the CoC strategy by providing common APIs and standardized access to platform support software (RTOS, BSP, low-level I/O, and middleware) to support various Design and Development Offices. Architecture Evolution: Design and implement new capabilities for embeddable solutions, including secure mathematical functions, robust file system services, and time/logging services to support the communalization strategy. Certification & Compliance: Share responsibility for the platform software certification process, interfacing with certification authorities to demonstrate compliance with RTCA DO-178C. Technology Assessment & Bring-up: Support the CoC strategy by performing trade-off analyses, technical benchmarking, and rapid prototyping on reference boards. Collaborate in the evaluation and board bring-up of new target platforms, with a focus on multicore architectures. Required Qualifications & Skills Technical Expertise : Programming: Advanced proficiency in C for real-time embedded systems. Experience with GNU toolchains and modern/legacy compilers (GCC, Clang/LLVM, Diab). Computer Architecture: Strong background in ARM, PowerPC, or x86 and SoC architectures. Deep understanding of MMUs, caches, memory hierarchies, and pipelining. Avionics & Protocols: Expert knowledge of avionics data buses, including legacy (ARINC-429, MIL-STD-1553B, CAN) and modern digital networks (AFDX, TSN), as well as analog/discrete I/O. Peripherals & Interconnects: Extensive experience with low-speed peripherals (UART, SPI, I2C) and high-speed interconnects (PCIe) and DMA. RTOS & ARINC-653: Advanced knowledge of safety-critical RTOS and the ARINC-653 specification. Hands-on experience with COTS solutions (e.g., Wind River VxWorks 653, PikeOS, Green Hills Integrity, or DEOS). Certification Standards: In-depth knowledge of RTCA DO-178C and RTCA DO-330. Scripting & Data: Proficiency in Python for automation (CI/CD, hardware setup) and solid understanding of data serialization (JSON, XML). Language Skills: English: Professional negotiation level. Additional Valuable Skills Embedded Linux: Experience in driver development and platform software for mission or safety-critical Linux systems. Modeling: Familiarity with UML and hands-on experience with SysML tools (e.g., Cameo, IBM Rhapsody). Safety-Critical Analysis: Experience with static analysis tools (Polyspace, SciTools Understand) and structural code coverage tools (LDRA). Performance Profiling: Knowledge of Processor Performance Monitor Counters (PMC) and hardware event monitors, specifically regarding multicore resource contention and interference mitigations. Methodologies: Experience working in Agile environments using Jira and Confluence. Core Competencies Proactivity and high autonomy. Strong analytical problem-solving mindset. Ability to collaborate effectively in complex, cross-functional teams. Which Benefits will you have as an Airbus employee?: Vacation days plus additional days-off along the year Attractive salary. Hybrid model of working when possible. Collective transport service subject to working calendar/home location. Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. * Option to access special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Software Engineering By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description:An opportunity for an CAMO Engineer has arisen within Airbus Defence and Space, Getafe (Madrid).Provide Maintenance Engineering and fleet management support activities (associated to EASA/EMAR Part M scope) to manage and assure the continuing airworthiness of the aircraft of the Customer fleet at their facilities, that are necessary to get a safety operation with the highest level of fleet availability and lowest maintenance cost, always in compliance with the Customer's National Regulation Authorities.Support the Customer in all continuing airworthiness activities as required.RESPONSIBILITIESMAIN ACCOUNTABILITIES /MAJOR END RESULT S- Control of continuing airworthiness for Customer fleet- Fleet availability and performance- Maintenance scheduled economics and available performances- Continuous improvement of Customer maintenance programme.MAIN ACTIVITIESPerform the activities covering the scope of CAMO service department, that may include but not limited to:- Development and update of the Operator Maintenance Program (OMP)- Analysis of effectiveness of OMP and optimization processes as required- Analyse Maintenance Status of aircraft in accordance with documentation provided by the Customer and issue maintenance work orders as required to comply with all airworthiness requirements- Analysis of all Engineering Documentation, ADs, SBs, VSBs, Modifications, Engineering Orders, SIL, AOT, etc. for all ATA), in order to be implemented in the Customer fleet. For optional works (SBs, Mods) he/she is responsible to perform cost/benefit analysis (cost, maintenance improvements, operational improvements#) and report to the Customer. Also to provide an aircraft status for SBs, Mods configuration control.- Monitor of the reliability of aircraft systems and components of the Customer fleet, performing all the required activities to issue the operator reliability reports and participation and supporting reliability meetings with the Customer. He/She shall liaise with other members of the Technical Services team (Core and local) and the suppliers/OEM organisations and oversee the reliability programme.- Provide Long, Medium and/or Short Term Planning of the Customer.- Ensure aircraft configuration control and update of aircraft included in the Customer fleet- Ensure Technical Records are controlled and registered as required in the specified IT tool for the Customer.- Support the Customer in any topic related to continuing airworthiness (queries solving, procedures development, etc.)- Perform Customer Engineering Orders in maintenance "language” in order to execute SBs, VSBs, Mods, etc- Answer and support any Technical Query associated with the ATAs analysed.DECISION AND LEADERSHIP AUTHORITY- Liaison with Customer for continuing airworthiness activities and fleet management- Assessment on maintenance program and planning- Assessment to Customer for SBs embodiment due cost / effectiveness analysis in liaison with internal Airbus Military policies and engineering documentation- Assessment to Customer from Reliability analysis- Provide answer to technical queries.SKILLS- Technical: EASA/EMAR Part M and Part 145 regulation; Airline Business & Operations; Customize Maintenance Prog. & Planning; Maintenance and Planning Data Analysis; Maintenance economics/reliability; Maintenance Planning; Configuration Management in service; Aircraft systems and structure knowledge; Knows Maintenance operation; Use maintenance documentation.- Soft: Customer expectations & needs; Manage authorities & customer relationship; Answer customer technical queries; Persuading and influence; Communication skillsWHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE?At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits:- Vacation days plus additional days-off along the year.- Attractive salary.- Hybrid model of working when possible.- Collective transport service subject to working calendar/home location.- Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants.- On-site facilities (among others): free canteen, kindergarten, medical office.- Possibility to collaborate in different social and corporate social responsibility initiatives.- Excellent upskilling opportunities and great development prospects in a multicultural environment.- Option to access special rates in products & benefits.Other information: Position is located at the Customer facilities in Madrid, during Customer working time. It may be requested to travel to other Customer facilities or Airbus facilities. Other deployments required up to 6 months. It is desirable previous experience on continuing aiworthiness activities at civil or military operators.This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.Company:Airbus Defence and Space SAUEmployment Type:Permanent-------Experience Level:ProfessionalJob Family:Customer Eng.&Technical Support&ServicesBy submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com .At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: About Highly Integrated Systems - TADYS As part of the newly established Highly Integrated Systems (HIS) domain within Aircraft Systems Centre of Competence (CoC), you will join the Computing Platforms & Multisystems HW/SW Integration group (TADYS2). HIS is the Multisystem and IMA Design Office and Airborne Computing Platforms responsible and centralizes expertise and competencies for driving architectural reuse, strategic alignment, and economies of scale across the CoC. Within this framework, the TADYS2 subdomain focuses on the standardization of embedded software and computing platforms. As a Senior Software Platform Integration Engineer, you will spearhead the CoC’s computing platforms strategy, ensuring the delivery of robust, certifiable, and high-performance software artifacts for computing platforms and you will be dealing with the HW/SW integration for multi-systems architectures, essential for the next generation of AirPower systems. Key responsibilities In this role, you will drive the integration and standardization of software platforms through the following pillars: Requirements & Design: Elicit and maintain Software Requirements Specifications (SRS) for onboard safety-critical computers. Design, develop, and perform Validation & Verification (V&V) of software artifacts in strict adherence to RTCA DO-178C (up to DAL-A). Platform Integration & Architecture: Lead the definition of full software platform architectures for multisystem computing platforms. This includes partitioning, scheduling, resource allocation, and the integration of third-party application and low-level software (RTOS BSPs, drivers, and middleware). Standardization & API Development: Drive the CoC strategy by providing common APIs and standardized access to platform support software (RTOS, BSP, low-level I/O, and middleware) to support various Design and Development Offices. Architecture Evolution: Design and implement new capabilities for embeddable solutions, including secure mathematical functions, robust file system services, and time/logging services to support the communalization strategy. Certification & Compliance: Share responsibility for the platform software certification process, interfacing with certification authorities to demonstrate compliance with RTCA DO-178C. Technology Assessment & Bring-up: Support the CoC strategy by performing trade-off analyses, technical benchmarking, and rapid prototyping on reference boards. Collaborate in the evaluation and board bring-up of new target platforms, with a focus on multicore architectures. Required Qualifications & Skills Technical Expertise : Programming: Advanced proficiency in C for real-time embedded systems. Experience with GNU toolchains and modern/legacy compilers (GCC, Clang/LLVM, Diab). Computer Architecture: Strong background in ARM, PowerPC, or x86 and SoC architectures. Deep understanding of MMUs, caches, memory hierarchies, and pipelining. Avionics & Protocols: Expert knowledge of avionics data buses, including legacy (ARINC-429, MIL-STD-1553B, CAN) and modern digital networks (AFDX, TSN), as well as analog/discrete I/O. Peripherals & Interconnects: Extensive experience with low-speed peripherals (UART, SPI, I2C) and high-speed interconnects (PCIe) and DMA. RTOS & ARINC-653: Advanced knowledge of safety-critical RTOS and the ARINC-653 specification. Hands-on experience with COTS solutions (e.g., Wind River VxWorks 653, PikeOS, Green Hills Integrity, or DEOS). Certification Standards: In-depth knowledge of RTCA DO-178C and RTCA DO-330. Scripting & Data: Proficiency in Python for automation (CI/CD, hardware setup) and solid understanding of data serialization (JSON, XML). Language Skills: English: Professional negotiation level. Additional Valuable Skills Embedded Linux: Experience in driver development and platform software for mission or safety-critical Linux systems. Modeling: Familiarity with UML and hands-on experience with SysML tools (e.g., Cameo, IBM Rhapsody). Safety-Critical Analysis: Experience with static analysis tools (Polyspace, SciTools Understand) and structural code coverage tools (LDRA). Performance Profiling: Knowledge of Processor Performance Monitor Counters (PMC) and hardware event monitors, specifically regarding multicore resource contention and interference mitigations. Methodologies: Experience working in Agile environments using Jira and Confluence. Core Competencies Proactivity and high autonomy. Strong analytical problem-solving mindset. Ability to collaborate effectively in complex, cross-functional teams. Which Benefits will you have as an Airbus employee?: Vacation days plus additional days-off along the year Attractive salary. Hybrid model of working when possible. Collective transport service subject to working calendar/home location. Benefits such as life insurance, health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. * Option to access special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Software Engineering By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: A vacancy for an A330 B1/B2 Aircraft Maintenance Technician has arisen within Airbus Defence and Space, AD&S, in Getafe, Madrid. The successful applicant will join AD&S Final Assembly Line team with double shift. RESPONSIBILITIES Working as part of Final Assembly Line FAL A330 MRTT Flight Line Centre - AG4 team, the role shall be: Prepare, perform and certify base and line maintenance works as a B1 certifying staff, working with a very small group of non-licensed technicians, when needed. Aircraft preparation for flight by implementing on A/C the items recorded in the Test Preparation Sheet, TPS, issued by FlightOps organization for every flight. Carry out production works on the aircraft to prepare it for ground test managed by MRTT Design Office and supervised by FAL- Quality as well as the required support during tests execution. Carry out retrofit mechanical works and tests on the aircraft in accordance with applicable retrofit service bulletin or applicable Job Cards. Perform aircraft discrepancy fixing, trouble-shooting, handling and servicing. The position is based in Getafe but the candidate must be willing to work abroad at ADS customer’s sites during aircraft delivery, to support ground & flight tests campaigns as well as AD&S Service’s organization to implement Services Bulletins on site, to carry out aircraft conversion works at AD&S subcontractor premises, etc. This is a challenging position combining a desirable military background, EASA Part 66 license as well as EMAR/FR 66 and working in an environment which planning charges almost in a daily basis. As a part of Flight Line Centre - AG4 organization, the candidate shall provide support to A330 MRTT and A310 DEMO when required. The candidate shall be willing to obtain National and NATO clearance, HPS Habilitación Personal de Seguridad. SKILLS We are looking for candidates with the following skills and experience: Aircraft maintenance license EASA PART 66 category B1 aircraft rating Airbus A330 (RR TRENT 700 & GE CF6) without limitations. MANDATORY. Being in possession of a valid EASA PART 66 category B2 aircraft maintenance license with the A330 will be HIGHLY RECOMMENDED . Candidates shall have a minimum of 5 years of previous experience in Airbus aircraft maintenance environment and least 2 years working in A330 (RR TRENT 700) and/or (GE CF6). Candidates shall also be able to demonstrate by delivering during the selection process a copy of the relevant records to show up to date aircraft continuous training and experience in accordance to EASA regulation in this aircraft. English: fluent level Spanish: negotiation level. Candidate must be willing to work abroad for a limited periods of time on a regular basis Holding of national and NATO security clearance (SC) will by highly appreciated. The candidates shall have experience of working to high quality standards and have an understanding of work recording and job traceability. They will have experience in reading and understanding detailed technical data and manufacturer’s maintenance manuals and instructions in English. A high knowledge of Aircraft Health and Safety procedures and a good standard of computer literacy are required. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport service in some sites. Benefits such as health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. * Special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Production means/Maintenance By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description:A vacancy for an A330 B1/B2 Aircraft Maintenance Technician has arisen within Airbus Defence and Space, AD&S, in Getafe, Madrid. The successful applicant will join AD&S Final Assembly Line team with double shift.RESPONSIBILITIESWorking as part of Final Assembly Line FAL A330 MRTT Flight Line Centre - AG4 team, the role shall be:- Prepare, perform and certify base and line maintenance works as a B1 certifying staff, working with a very small group of non-licensed technicians, when needed.- Aircraft preparation for flight by implementing on A/C the items recorded in the Test Preparation Sheet, TPS, issued by FlightOps organization for every flight.- Carry out production works on the aircraft to prepare it for ground test managed by MRTT Design Office and supervised by FAL- Quality as well as the required support during tests execution.- Carry out retrofit mechanical works and tests on the aircraft in accordance with applicable retrofit service bulletin or applicable Job Cards.- Perform aircraft discrepancy fixing, trouble-shooting, handling and servicing.- The position is based in Getafe but the candidate must be willing to work abroad at ADS customer’s sites during aircraft delivery, to support ground & flight tests campaigns as well as AD&S Service’s organization to implement Services Bulletins on site, to carry out aircraft conversion works at AD&S subcontractor premises, etc.- This is a challenging position combining a desirable military background, EASA Part 66 license as well as EMAR/FR 66 and working in an environment which planning charges almost in a daily basis. As a part of Flight Line Centre - AG4 organization, the candidate shall provide support to A330 MRTT and A310 DEMO when required.- The candidate shall be willing to obtain National and NATO clearance, HPS Habilitación Personal de Seguridad.SKILLSWe are looking for candidates with the following skills and experience:- Aircraft maintenance license EASA PART 66 category B1 aircraft rating Airbus A330 (RR TRENT 700 & GE CF6) without limitations. MANDATORY.- Being in possession of a valid EASA PART 66 category B2 aircraft maintenance license with the A330 will be HIGHLY RECOMMENDED .- Candidates shall have a minimum of 5 years of previous experience in Airbus aircraft maintenance environment and least 2 years working in A330 (RR TRENT 700) and/or (GE CF6). Candidates shall also be able to demonstrate by delivering during the selection process a copy of the relevant records to show up to date aircraft continuous training and experience in accordance to EASA regulation in this aircraft.- English: fluent level- Spanish: negotiation level.- Candidate must be willing to work abroad for a limited periods of time on a regular basis- Holding of national and NATO security clearance (SC) will by highly appreciated.- The candidates shall have experience of working to high quality standards and have an understanding of work recording and job traceability. They will have experience in reading and understanding detailed technical data and manufacturer’s maintenance manuals and instructions in English. A high knowledge of Aircraft Health and Safety procedures and a good standard of computer literacy are required.WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE?At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits:- Vacation days plus additional days-off along the year.- Attractive salary.- Hybrid model of working when possible, promoting the work-life balance.- Collective transport service in some sites.- Benefits such as health insurance, employee stock options, retirement plan, or study grants.- On-site facilities (among others): free canteen, kindergarten, medical office.- Possibility to collaborate in different social and corporate social responsibility initiatives.- Excellent upskilling opportunities and great development prospects in a multicultural environment.- Special rates in products & benefits.This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.Company:Airbus Defence and Space SAUEmployment Type:Permanent-------Experience Level:ProfessionalJob Family:Production means/MaintenanceBy submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com .At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description: A vacancy for an A330 B1/B2 Aircraft Maintenance Technician has arisen within Airbus Defence and Space, AD&S, in Getafe, Madrid. The successful applicant will join AD&S Final Assembly Line team with double shift. RESPONSIBILITIES Working as part of Final Assembly Line FAL A330 MRTT Flight Line Centre - AG4 team, the role shall be: Prepare, perform and certify base and line maintenance works as a B1 certifying staff, working with a very small group of non-licensed technicians, when needed. Aircraft preparation for flight by implementing on A/C the items recorded in the Test Preparation Sheet, TPS, issued by FlightOps organization for every flight. Carry out production works on the aircraft to prepare it for ground test managed by MRTT Design Office and supervised by FAL- Quality as well as the required support during tests execution. Carry out retrofit mechanical works and tests on the aircraft in accordance with applicable retrofit service bulletin or applicable Job Cards. Perform aircraft discrepancy fixing, trouble-shooting, handling and servicing. The position is based in Getafe but the candidate must be willing to work abroad at ADS customer’s sites during aircraft delivery, to support ground & flight tests campaigns as well as AD&S Service’s organization to implement Services Bulletins on site, to carry out aircraft conversion works at AD&S subcontractor premises, etc. This is a challenging position combining a desirable military background, EASA Part 66 license as well as EMAR/FR 66 and working in an environment which planning charges almost in a daily basis. As a part of Flight Line Centre - AG4 organization, the candidate shall provide support to A330 MRTT and A310 DEMO when required. The candidate shall be willing to obtain National and NATO clearance, HPS Habilitación Personal de Seguridad. SKILLS We are looking for candidates with the following skills and experience: Aircraft maintenance license EASA PART 66 category B1 aircraft rating Airbus A330 (RR TRENT 700 & GE CF6) without limitations. MANDATORY. Being in possession of a valid EASA PART 66 category B2 aircraft maintenance license with the A330 will be HIGHLY RECOMMENDED . Candidates shall have a minimum of 5 years of previous experience in Airbus aircraft maintenance environment and least 2 years working in A330 (RR TRENT 700) and/or (GE CF6). Candidates shall also be able to demonstrate by delivering during the selection process a copy of the relevant records to show up to date aircraft continuous training and experience in accordance to EASA regulation in this aircraft. English: fluent level Spanish: negotiation level. Candidate must be willing to work abroad for a limited periods of time on a regular basis Holding of national and NATO security clearance (SC) will by highly appreciated. The candidates shall have experience of working to high quality standards and have an understanding of work recording and job traceability. They will have experience in reading and understanding detailed technical data and manufacturer’s maintenance manuals and instructions in English. A high knowledge of Aircraft Health and Safety procedures and a good standard of computer literacy are required. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport service in some sites. Benefits such as health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. * Special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Production means/Maintenance By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Radisson Hotel Group is one of the world's largest hotel groups with ten distinctive hotel brands, and more than 1,500 hotels in operation and under development in 95+ countries. The Group’s overarching brand promise is Every Moment Matters with a signature Yes I Can! service ethos. People are at the core of our business success and future. Our people are true Moment Makers and together we bring the culture, spirit, environment and opportunities that empower you to be your best, every day, everywhere, every time. Together, we make Every Moment Matter. The Associate Cluster Revenue Manager will be responsible for delivering all aspects of revenue management, for a designated cluster of hotels, in order to achieve the budgeted objectives for total revenue generating points of sale. The scope includes pricing, yielding and total revenue optimization and requires a strategic, analytical and commercial mindset. The Associate Cluster Revenue Manager will work with the Hotel Team and relevant key Commercial & Marketing stakeholder to drive Total Profitable Revenue and grow market share. Key roles and responsibilities: 1. Understand market dynamics and monitor competitor pricing to grow revenue and RevPAR for assigned portfolio. 20%, 2. Deliver effective pricing and ensure optimal inventory for all revenue streams and market segments. 20%, 3. Generate revenue forecasts and budgets for all hotels within area of responsibility. 20%, 4. Understand, investigate and extract data from any relevant system needed for problem solving and analysis. 15%, 5. Embrace and ensure optimization of new systems and tools to maximize revenue. 15%, 6. Work closely with the Area/Corporate Support Office and the hotel operational teams to ensure aligned direction. 10% Grow total revenue and reach budgeted targets in RevPAR and RGI market penetration. Ensure forecast accuracy. A successful candidate will either have or quickly establish a strong knowledge in market dynamics and hotel technology including Revenue Management Systems (such as IDeaS G3 or Duetto GC), Hotel Reservation Systems (PMS/S&C) and Distribution Systems (Channel Manager, GDS, CRS, Distribution Connectivity Partners, OTA Extranets). Combining the understanding of systems thinking with a balanced approach also upon what is needed commercially and operationally is key. You will need strong communication skills, be able to easily build trust with key hotel and corporate stakeholders and balance long term strategic direction with short term rate & volume optimization. A successful candidate will have strong analysis skill, be well organized with an eye for details. Minimum education: Relevant background suggests Bachelor or Master degree in Hospitality, Business Administration, Finance or Statistics. Minimum experience: 3 years of experience in Revenue Management, Pricing and/or Distribution. Language skills: Fluent in English both written and spoken. Other languages is a plus Required certificates: Desirable to be experienced in Hotel Reservation Systems, Revenue Management Systems and/or Distribution / Channel Management Systems. Work permit: Must hold a valid one for EU Why Join Radisson Hotel Group? Live the Magic of Hospitality - Be part of a team that creates exceptional experiences and memorable moments every day. Let your Yes I Can! spirit shine as you bring hospitality to life. Build a Great Career - No matter your background or experience, we invest in your growth, learning, and career development—helping you reach your full potential. Experience the Team Spirit - Join a workplace that’s inclusive, fun, and meaningful. We celebrate diversity, support one another and foster a sense of belonging through our Employee Resource Groups and inclusion initiatives. Lead with Your Ambition - Your ideas, passion and drive matter! We empower you to make a difference—in hospitality, your community and beyond. Enjoy Global & Local Perks - No matter where you’re located, you’ll enjoy exclusive global benefits - like special hotel rates for you and your loved ones at our hotels worldwide. Plus, you’ll have access to local perks and rewards tailored to your country, making your experience even more rewarding! Enjoy benefits such as - up to 53% off your stay as a Team Member at over 1,500 Radisson Hotels worldwide Guaranteed minimum of 30% off for your Friends & Family Exclusive Discounts on Breakfast, Food & Beverage, Spa and more Join us in shaping the future of hospitality! If you’re ready to bring your talent, energy, and passion, we’d love to hear from you. We welcome applicants from all backgrounds, abilities, and experiences. If you need any adjustments during the application process, please let us know. #J-18808-Ljbffr

Job Description Are you passionate about the intersection of aeronautical engineering and software development? We are seeking a highly motivated Methods & Tools Software Developer engineer to join the Data Processing and Analysis Development group within Ground Station Team as part of the Flight and Integration Test Centre. You will be responsible for developing, optimizing, and maintaining the software ecosystem used by the Test/System Specialists to perform their analysis of Rig/Benches/Ground/Flight tests data. Additionally, you will act as a bridge between the Analysis Community in the Spanish perimeter and Ground Station in terms of tools and infrastructure, ensuring direct communication and providing technical support. In this role, you will contribute to all current Airbus Defence & Space programs-including A330 MRTT, A400 M, C295, Eurofighter, SIRTAP, Eurodrone-while developing analysis tools and providing technical support to multiple areas - ranging from Avionics and Mission, Performance, Handling Qualities, Powerplant, General systems, Aerial Delivery, Datalinks... Responsibilities Tool Development & Maintenance: Design, implement, and maintain software tools to be used by the Test Centre Analysis Teams. Interdisciplinary Collaboration: Work closely with specialized Test Analysis groups (Performance, Handling Qualities, Avionics and Mission, Aerial Delivery, etc), to translate and integrate their mathematical models into functional software tools. Shape the Future: Play a key role in the definition of the future technology stack for Analysis Tools, ensuring the migration and integration of our current toolset into the new Time Series Analysis Tool Platform for Military (TSASM). Cross-Functional Liaison: Act as a technical point of contact between the Ground Station Team and the Analysis Community in Spain, ensuring a constant communication and providing support related to Analysis Tools when needed. Skills Educational background: Bachelor’s or Master’s degree in Aeronautical Engineering or Aerospace Engineering with a focus on scientific computing. Programming Expertise: Strong knowledge of MATLAB for scientific applications. Proficiency in Python, with deep experience in core data analysis libraries such as Num Py, Pandas, Sci Py, Matplotlib, and the Jupyter ecosystem. Familiarity with other Python libraries like Sim Py and Numba is highly desirable. Experience compiled languages, Fortran 77/90 and C++, or a strong willingness to learn them. o CI/CD: Git mandatory, Jenkins and Nexus desirable. Methodologies: Experience working in Agile environments using Jira and Confluence. Analytical Mindset: A deep interest in scientific programming and the ability to implement mathematical equations into efficient code. Communication: Excellent interpersonal skills with the ability to communicate technical software concepts to non-software engineers (and vice versa). Language Skills: English advanced. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport service in some sites. Benefits such as health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. Special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company Airbus Defence and Space SAU Employment Type Permanent Experience Level Professional Job Family Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@. At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. #YESPOST #J-18808-Ljbffr

Job Description: Are you passionate about the intersection of aeronautical engineering and software development? We are seeking a highly motivated Methods & Tools Software Developer engineer to join the Data Processing and Analysis Development group within Ground Station Team as part of the Flight and Integration Test Centre You will be responsible for developing, optimizing, and maintaining the software ecosystem used by the Test/System Specialists to perform their analysis of Rig/Benches/Ground/Flight tests data. Additionally, you will act as a bridge between the Analysis Community in the Spanish perimeter and Ground Station in terms of tools and infrastructure, ensuring direct communication and providing technical support. In this role, you will contribute to all current Airbus Defence & Space programs-including A330 MRTT, A400M, C295, Eurofighter, SIRTAP, Eurodrone-while developing analysis tools and providing technical support to multiple areas - ranging from Avionics and Mission, Performance, Handling Qualities, Powerplant, General systems, Aerial Delivery, Datalinks... RESPONSIBILITIES Tool Development & Maintenance: Design, implement, and maintain software tools to be used by the Test Centre Analysis Teams. Interdisciplinary Collaboration: Work closely with specialized Test Analysis groups (Performance, Handling Qualities, Avionics and Mission, Aerial Delivery, etc), to translate and integrate their mathematical models into functional software tools. Shape the Future: Play a key role in the definition of the future technology stack for Analysis Tools, ensuring the migration and integration of our current toolset into the new Time Series Analysis Tool Platform for Military (TSASM). Cross-Functional Liaison: Act as a technical point of contact between the Ground Station Team and the Analysis Community in Spain, ensuring a constant communication and providing support related to Analysis Tools when needed. SKILLS Educational background: Bachelor’s or Master’s degree in Aeronautical Engineering or Aerospace Engineering with a focus on scientific computing. Programming Expertise: Strong knowledge of MATLAB for scientific applications. Proficiency in Python, with deep experience in core data analysis libraries such as NumPy, Pandas, SciPy, Matplotlib, and the Jupyter ecosystem. Familiarity with other Python libraries like SimPy and Numba is highly desirable. Experience compiled languages, Fortran 77/90 and C++, or a strong willingness to learn them. o CI/CD: Git mandatory, Jenkins and Nexus desirable. Methodologies: Experience working in Agile environments using Jira and Confluence. Analytical Mindset: A deep interest in scientific programming and the ability to implement mathematical equations into efficient code. Communication: Excellent interpersonal skills with the ability to communicate technical software concepts to non-software engineers (and vice versa). Language Skills: English advanced. WHICH BENEFITS WILL YOU HAVE AS AIRBUS EMPLOYEE? At Airbus we are focused on our employees and their welfare. Take a look at some of our social benefits: Vacation days plus additional days-off along the year. Attractive salary. Hybrid model of working when possible, promoting the work-life balance. Collective transport service in some sites. Benefits such as health insurance, employee stock options, retirement plan, or study grants. On-site facilities (among others): free canteen, kindergarten, medical office. Possibility to collaborate in different social and corporate social responsibility initiatives. Excellent upskilling opportunities and great development prospects in a multicultural environment. Special rates in products & benefits. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth. Company: Airbus Defence and Space SAU Employment Type: Permanent ------- Experience Level: Professional Job Family: Testing By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com . At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.