Power electronics jobs in SevillaCreate job alerts

Hardware Lead Engineer (Electric Aviation) Location: Spain ✛ This role is being managed exclusively by HYTE on a retained basis ✛ Direct applications and confidential enquiries are welcomed. ✛ Overview ✛ HYTE is supporting an innovative electric aviation company developing next-generation electric propulsion systems for regional aircraft. The organisation is building the technology required to support the transition toward fully electric, zero-emissions aviation, with programmes focused on aircraft conversion, propulsion integration and certification. To support the continued growth of its engineering capability, the company is seeking a Hardware Lead Engineer to take ownership of the hardware development domain. This role combines technical authority, system architecture responsibility and engineering team leadership, ensuring hardware systems are developed, verified and certified in line with demanding aviation standards. The successful individual will drive hardware development across the full lifecycle — from architecture and design through verification and certification — while coordinating and growing the internal hardware engineering team. ✛ Key Responsibilities ✛ • Lead the end-to-end hardware development lifecycle, from requirements definition through design, implementation, verification and certification, • Define hardware architectures and technical strategies aligned with system and certification requirements, • Act as the technical authority for hardware design decisions across the programme, • Lead and mentor the hardware engineering team, supporting planning, prioritisation and technical direction, • Coordinate hardware activities across systems, software, propulsion, airframe and certification teams, • Oversee schematic design, PCB layout and hardware integration, including high-voltage and safety-critical systems, • Ensure robust design practices covering EMI/EMC, environmental constraints and reliability, • Support hardware-software integration for systems including battery management, power electronics and motor control, • Guide verification and analysis activities using tools such as MATLAB and LTSpice, • Ensure hardware documentation, traceability and certification evidence are maintained in line with aviation standards ✛ Candidate Profile ✛ • Degree in Electrical or Electronic Engineering (Bachelor’s or Master’s), • Strong experience developing hardware for safety-critical systems, • Proven experience leading technical engineering activities and coordinating engineering teams, • Strong understanding of RTCA DO-254 hardware design assurance and certification processes, • Experience with EMI/EMC and environmental testing, • Proficiency in Altium Designer, • Experience using LTSpice and MATLAB for hardware analysis and verification, • Understanding of high-voltage PCB design and operation in aviation environments, • Strong communication skills and ability to work across multidisciplinary engineering teams, • Professional working proficiency in technical English, • Previous experience within aviation, aerospace, electric propulsion, or advanced mobility environments is highly advantageous ✛ Take your career to new HYTEs ✛ • Opportunity to contribute to one of the most exciting transitions in modern aviation, • Key technical leadership role within a fast-growing electric aviation programme, • Exposure to aircraft certification, electric propulsion systems and advanced hardware development, • Collaborative engineering environment with significant technical ownership, • Competitive salary, flexible working options and participation in long-term incentive programmes

The Opportunity We are looking for a Planning Engineer to join our operations team, responsible for production scheduling, resource allocation, and the end-to-end Sales & Operations Planning (S&OP) process. In this role, you will act as a key interface between Sales, Supply Chain Management (SCM), and Production, ensuring that demand forecasts are translated into an optimized and executable manufacturing plan. This position has a direct impact on business performance, as production planning is closely linked to revenue planning and overall operational capacity. How You’ll Make an Impact • Develop and maintain the master production schedule, optimizing manufacturing capacity and minimizing lost production slots., • Translate sales forecasts and pipeline demand into executable production and purchasing plans in coordination with SCM., • Allocate production resources and adjust schedules based on constraints, delays, or operational changes in collaboration with Production., • Act as the main point of contact between Sales, Production, and SCM departments., • Monitor execution of production plans, identifying risks, bottlenecks, and deviations, and implementing corrective actions., • Prepare regular reporting for senior management, including KPIs, production status, and risk analysis. Your Background • Engineering degree preferred (not mandatory)., • Experience in production planning or manufacturing scheduling in multidisciplinary environments., • Strong understanding of production planning systems and S&OP processes., • Ability to manage high-level planning activities with direct impact on business decisions and revenue planning., • Knowledge of power electronics or converters is a plus, but not required in depth., • Strong analytical, coordination and communication skills, with C1–C2 English level (mandatory). About Us We are an industrial and technology-driven organization focused on delivering high-performance manufacturing and engineering solutions across complex, multidisciplinary environments. Our operations integrate Sales, Supply Chain, and Production functions to ensure efficient execution of demand-driven manufacturing plans, while maintaining high standards of quality, reliability, and operational excellence. We work in a dynamic environment where planning plays a critical role in aligning business strategy with production capability and customer demand. Join us!

Lead Electrical & Electronic Hardware Engineer (Electric Propulsion) Location: Spain ✛ This role is being managed exclusively by HYTE on a retained basis ✛ Direct applications and confidential enquiries are welcomed ✛ Overview ✛ HYTE is supporting an innovative electric aviation company developing next-generation electric propulsion systems for regional aircraft. The organisation is at the forefront of enabling zero-emissions aviation, with programmes spanning aircraft conversion, propulsion integration and certification. As part of its continued growth, the company is seeking a Lead Electrical & Electronic Hardware Engineer to take ownership of hardware development across propulsion systems. This is a dual-responsibility role , combining: Hands-on engineering delivery (design, integration, V&V) Certification ownership and authority interface (EASA, DO-254, DO-160G) The successful candidate will play a central role in defining and delivering certifiable hardware systems, working across the full lifecycle from architecture through to qualification and approval. ✛ Key Responsibilities ✛ Lead the end-to-end development of electrical and electronic hardware systems, from requirements through design, integration, verification and certification. Define hardware architectures across propulsion-related systems, ensuring alignment with safety and certification requirements. Act as technical authority for E&E hardware across the programme, supporting design decisions and trade-offs. Own hardware certification activities, including compliance with DO-254, DO-160G, ARP4754A and ARP4761. Interface directly with certification authorities (EASA), supporting audits, documentation and approval processes. Lead and mentor hardware engineering activities, ensuring delivery against programme milestones. Coordinate closely with systems, software, propulsion and certification teams to ensure integrated system delivery. Drive development of hardware across key subsystems, including: Battery Management Systems (BMS) Power Distribution Units (PDU / HVPDU) Inverter and power electronics systems Oversee detailed design activities including schematics, PCB layout, integration and validation. Ensure robust design practices covering EMI/EMC, environmental constraints, grounding, bonding and safety. Support system-level architecture definition, including HV wiring, connectors, harnesses and protection strategies. Lead verification, validation and analysis activities using simulation and hardware tools. Maintain full hardware traceability and certification evidence in line with aviation standards. ✛ Candidate Profile ✛ Degree in Electrical or Electronic Engineering (Bachelor’s or Master’s). Minimum ~5 years’ experience in hardware development within safety-critical environments. Proven experience across the full hardware lifecycle, from architecture through to qualification. Strong knowledge of aviation certification standards, including: DO-254 (hardware design assurance) DO-160G (environmental & EMC) ARP4754A / ARP4761 (system development & safety) Hands-on experience developing propulsion-related hardware systems, such as: BMS, PDU, HVPDU, inverters High-voltage sensing (voltage, temperature) Protection systems and safety functions Communication interfaces and system integration Strong understanding of electrical propulsion architectures, including: HV distribution, wiring and connectors Grounding and bonding strategies System-level EMI/EMC considerations Practical experience with EMC design and testing in aerospace environments (DO-160G) Experience with power electronics design, including thermal management and IGBT / SiC devices Proficiency with hardware design and simulation tools such as: Altium Designer LTSpice, PLECS, PSIM or equivalent MATLAB (desirable) Experience with FMEA / FMECA and safety-driven design approaches. Strong communication skills, with ability to interface across engineering teams and external authorities. Professional working proficiency in English. Experience in aerospace, electric propulsion, eVTOL or advanced mobility environments is highly desirable. ✛ Take your career to new HYTEs ✛ Opportunity to play a key role in shaping certifiable electric propulsion systems for next-generation aircraft. High-impact technical leadership position within a fast-scaling aviation programme. Direct exposure to certification authorities and aircraft-level system integration. Broad scope across hardware, systems and propulsion engineering. Collaborative, engineering-led environment with strong technical ownership. Competitive salary, flexible working and long-term incentive participation.

Join DHV Technology and Be Part of the Vanguard in Space Technology Si los siguientes requisitos del puesto y la experiencia coinciden con sus habilidades, por favor, asegúrese de enviar su solicitud sin demora. Launch your career with a company that’s building the future beyond Earth. At DHV Technology, our mission is clear: to accelerate space exploration by delivering innovative power solutions that drive missions across the globe. We are a Spanish company headquartered in Málaga, with a strong international presence and a leading position in the design and manufacturing of solar panels and power systems for space applications. With clients in over 40 countries, our technology is already orbiting Earth and beyond, making DHV Technology a global reference in the aerospace industry. Working here means joining a unique sector where every project has a global impact and the potential to shape the future of humanity. We develop solutions for satellites and space missions, including deployable solar arrays and advanced power systems that store and manage energy for groundbreaking projects. Innovation, customer orientation, and excellence are the core values driving our continuous growth and keeping us at the forefront of space exploration. What is it like to be a Mechanical Engineer at DHV Technology? As a Mechanical Engineer at DHV Technology, you will take part in the design and development of space hardware for our satellite power subsystems. You will be involved in all project phases, from concept to qualification, ensuring optimal mechanical performance of our products in a highly demanding and innovative environment. Responsibilities You will be engaged in all mechanical aspects of our projects, including but not limited to: • Design of mechanical systems for space applications., • Generation of 2D manufacturing and assembly drawings., • Preparation of design documentation, test procedures, and manufacturing instructions., • Execution of structural analyses and interpretation of results., • Evaluation and optimization of mechanical designs based on analytical results., • Selection and evaluation of materials suitable for aerospace environments., • Preparation of technical reports and design justification documentation., • Participation in qualification test campaigns both in-house and in specialized external laboratories., • Compilation of test reports and test as-run documentation. Education and Requirements To be considered for this position, candidates should meet the following requirements: • Bachelor's degree in Mechanical or Aerospace Engineering., • A Master’s degree in Space Systems is desirable., • 2–3 years of relevant experience in a similar position., • Professional proficiency in English (spoken and written)., • Availability to travel for testing activities. Technical Competencies Candidates should demonstrate strong knowledge and experience in the following areas: • 3D mechanical design using SolidWorks, CATIA, or similar CAD tools., • Structural analysis using FEM tools (preferably FEMAP or similar)., • Selection and use of metallic and composite materials., • Ability to understand and implement product requirements and customer specifications., • Knowledge of the Space Sector is highly valued., • Familiarity with ECSS standards and methodologies is an asset. Soft skills We are looking for candidates who bring the following attributes: • Teamwork and collaboration in multidisciplinary environments., • Creativity and innovative thinking to solve technical challenges., • Customer orientation and a strong sense of responsibility., • Results-driven mindset and a proactive attitude towards objectives., • Capacity to motivate and cooperate with the rest of the engineering team. What we offer • A full-time, on-site role based in Málaga, Spain., • Immediate start date., • Joining a multidisciplinary and highly qualified team., • Working on exciting international projects in the space sector., • Relocation package for national and international mobility., • Opportunities for professional development and career growth. Ready to Shape the Future of the Space Industry? If you're passionate about electronics and space technology and want to join a fast-growing, innovation-driven company working on high-impact international projects, DHV Technology is your place. Apply now and be part of the future of space. xcskxlj We’re waiting for you! Basic data protection information The data provided in this selection process will be communicated to DHV Technology for the purpose of including your application in current or future recruitment processes, as well as to keep them informed of job offers that may fit their job profile. You can exercise your data protection rights by sending an email to Further information on data protection in the Privacy Policy:

The Opportunity Por favor, presente su candidatura sin demora si su perfil encaja bien con este puesto, debido al alto nivel de interés. We are looking for a proactive and detail-oriented R&D Power Electronics Validation Engineer to join our Product Innovation & Development team. You will play a key role in validating power converters and control systems, ensuring product reliability, performance, and compliance with international standards. This is a great opportunity to grow your career in a dynamic, innovative, and international environment within the energy sector. How You’ll Make An Impact • Plan, define, and execute validation tests for power converters and control systems., • Analyse test results, signals, logs, and performance metrics, producing clear technical reports., • Automate tests and maintain laboratory and HIL test benches., • Ensure full traceability of tests from requirements to final reports., • Collaborate with engineering, quality, and certification teams to improve product reliability., • Bachelor’s degree in Electrical, Electronics, or a related Engineering field., • Experience in validating electronic products and/or embedded software., • Knowledge of power converters, laboratory instrumentation, and HIL systems., • High level of English and Spanish., • Experience with standards such as UL1741, IEC62477, IEC62109, IEC60076, or grid codes is valued. Hitachi Energy is a global technology leader in electrification, powering a sustainable energy future through innovative power grid technologies with digital at the core. Over three billion people depend on our technologies to power their daily lives. With over a century of pioneering mission-critical technologies, including high-voltage transformers, automation, and power electronics, we are addressing the most urgent energy challenge of our time – balancing soaring electricity demand while decarbonising the power system. Headquartered in Switzerland, we employ over 50,000 people in 60 countries and generate revenues of around USD 16 billion. xcskxlj We welcome you to apply today.

Do you want to work as low code / RPA developer in TDK? Do you enjoy creating smart digital solutions? Are you passionate about RPA and low‑code technologies? Do you want to help shape the governance of key IT platforms in a growing international company like TDK? Are you excited about joining a new IT Hub based in Malaga? If so… this will interest you! Si desea conocer los requisitos para este puesto, siga leyendo para obtener toda la información relevante. Which will be your mission? Your mission will be to play a key role in shaping, governing, and expanding our automation and collaboration ecosystem across UiPath, Microsoft Power Platform, and Atlassian tools (Jira & Confluence). You will contribute to both strategic governance and hands-on solution development, ensuring our IT Hub delivers scalable, secure, and high‑impact digital solutions for teams across the organization. What do we offer? You will be part of an international company and join a growing IT Hub where you can continue developing your professional skills while contributing to high‑impact digital solutions. • A multinational environment, • A dynamic IT department, • Hybrid work model, • Flexible working hours, • Attractive benefits package, including social benefits and competitive working conditions based on our internal agreement., • Continuous training and professional development, with opportunities to grow your expertise in RPA, low‑code platforms, and IT governance., • A positive and collaborative work atmosphere. How will you succeed in this position? • A background in Computer Science, similar technical studies, or equivalent vocational training., • Knowledge of RPA technologies, especially UiPath, including the ability to design, build, and troubleshoot automation workflows., • Hands‑on experience with low-code development, particularly Microsoft Power Platform (Power Apps and Power Automate)., • Understanding of solution design, technical architecture, integrations, and automation lifecycle., • Familiarity with API integrations, data sources and workflow logic., • Experience working with governance, security, and compliance guidelines for automation or low‑code environments., • Knowledge of Atlassian tools (Jira and Confluence) and their configuration is a plus., • Understanding of software development lifecycle, documentation practices, and version control (e.g., Git)., • Ability to engage with business stakeholders, capture requirements, and translate business needs into technical specifications., • Skills to coordinate the implementation of solutions, following established governance and ensuring alignment with best practices., • Experience with Scrum framework., • Ability to perform testing, debugging, and continuous improvement of automations, • Certifications in Power Platform (PL-200, PL-400, PL-900) or UiPath (Automation Developer Associate, Automation Business Analyst Associate) will be considered a plus., • Ability to maintain fluent spoken and written English, as you will collaborate regularly with international colleagues and teams across different locations. About us TDK is a multinational company dedicated to the manufacture of electronic components. We have made four significant innovations of which we are proud (ferrite material, magnetic tape, multilayer components, and magnetic printheads) and continue to create products that support social development. Looking to the future, as a company that constantly forges a path of innovation, TDK intends to continue contributing to customer value creation by providing high-quality products and services and utilizing our diverse global management resources. TDK will continue to contribute to culture and industry through consistent creativity, while earnestly pursuing the goal of "revitalizing and protecting the global environment and creating a pleasant and safe society. xcskxlj " Let us get to know you! data will be processed by TDK Electronics Components, S.A.U., with Tax Identification Number (CIF) A79252151, and registered office at Calle Severo Ochoa, 66, (PTA) 29590 Málaga, Spain, as the data controller, in accordance with your application to participate in this recruitment process. You may exercise your rights of access, rectification, erasure, restriction of processing, objection, and data portability; which you can do at the address Calle Severo Ochoa, 66, (PTA) 29590 Málaga, Spain; or by email to

Join DHV Technology and Be Part of the Vanguard in Space Technology ¡Inscríbase sin demora! Se espera un gran volumen de solicitantes para el puesto que se detalla a continuación, no espere para enviar su CV. Launch your career with a company that’s building the future beyond Earth. At DHV Technology, our mission is clear: to accelerate space exploration by delivering innovative power solutions that drive missions across the globe. We are a Spanish company headquartered in Málaga, with a strong international presence and a leading position in the design and manufacturing of solar panels and power systems for space applications. With clients in over 40 countries, our technology is already orbiting Earth and beyond, making DHV Technology a global reference in the aerospace industry. Working here means joining a unique sector where every project has a global impact and the potential to shape the future of humanity. We develop solutions for satellites and space missions, including deployable solar arrays and advanced power systems that store and manage energy for groundbreaking projects. Innovation, customer orientation, and excellence are the core values driving our continuous growth and keeping us at the forefront of space exploration. What is it like to be an Environmental Test Engineer at DHV Technology? As an Environmental Test Engineer at DHV Technology, you will play a key role in the preparation, execution, and documentation of structural and thermal environmental tests for our space solar panels and other subsystems. You will work closely with multidisciplinary teams to ensure that all components meet the highest quality and performance standards under simulated space conditions. Responsibilities: As an Accountant at DHV Technology, your main responsibilities will include: • Preparing Test Plans, Test Procedures, and Test Reports for assigned projects., • Executing vibration, shock, and vibro-acoustic tests in internal or external testing facilities., • Conducting vacuum and thermal cycling tests (TVAC, bake-out, etc.)., • Ensuring test readiness, including tools, resources, and schedule alignment., • Supporting specimen shipment and logistics in collaboration with Project Managers., • Ensuring proper documentation, including relevant and traceable technical information., • Making operational decisions during testing campaigns that do not compromise timelines or performance., • Demonstrating ownership and proactivity throughout the test campaigns., • Collaborating effectively with team members and contributing to a positive working environment. Education and Requirements: To be considered for this position, the following qualifications are required: • Bachelor’s degree in Aerospace, Aeronautical Engineering or similar., • At least 1 year of experience, preferably in environmental or test-related roles, regardless of the industry., • English fluency (minimum B2 level), both written and spoken. Technical Competencies Candidates should demonstrate strong knowledge and experience in the following areas: • Knowledge of environmental testing standards and procedures (e.g., ECSS, NASA)., • Familiarity with dynamic analysis concepts: random and sinusoidal vibrations, shock, etc., • Experience or understanding of thermal and vacuum test setups and conditions., • Proficiency in SolidWorks (mechanical modeling and design). Soft Skills We are looking for candidates with the following attributes: • Strong technical task management under supervision., • Excellent teamwork and communication skills., • Proactive attitude and ownership of responsibilities., • Attention to detail and a high commitment to quality., • Problem-solving abilities in dynamic and deadline-driven environments. What we offer • A full-time, on-site role based in Málaga, Spain., • Immediate start date., • Joining a multidisciplinary and highly qualified team., • Working on exciting international projects in the space sector., • Relocation package for national and international mobility., • Opportunities for professional development and career growth. Ready to Shape the Future of the Space Industry? If you're passionate about electronics and space technology and want to join a fast-growing, innovation-driven company working on high-impact international projects, DHV Technology is your place. Apply now and be part of the future of space. xcskxlj We’re waiting for you! Basic data protection information The data provided in this selection process will be communicated to DHV Technology for the purpose of including your application in current or future recruitment processes, as well as to keep them informed of job offers that may fit their job profile. You can exercise your data protection rights by sending an email to Further information on data prot

Join DHV Technology and Be Part of the Vanguard in Space Technology La siguiente información ofrece un resumen de las habilidades, cualidades y cualificaciones necesarias para este puesto. Launch your career with a company that’s building the future beyond Earth. At DHV Technology, our mission is clear: to accelerate space exploration by delivering innovative power solutions that drive missions across the globe. We are a Spanish company headquartered in Málaga, with a strong international presence and a leading position in the design and manufacturing of solar panels and power systems for space applications. With clients in over 40 countries, our technology is already orbiting Earth and beyond, making DHV Technology a global reference in the aerospace industry. Working here means joining a unique sector where every project has a global impact and the potential to shape the future of humanity. We develop solutions for satellites and space missions, including deployable solar arrays and advanced power systems that store and manage energy for groundbreaking projects. Innovation, customer orientation, and excellence are the core values driving our continuous growth and keeping us at the forefront of space exploration. What is it like to be a Manufacturing and Process Engineer at DHV Technology? As a Manufacturing and Process Engineer at DHV Technology, you will play a key role in ensuring the quality, consistency, and efficiency of our manufacturing documentation and processes. Working closely with design, systems, and production teams, you will be responsible for the creation, validation, and continuous improvement of technical documents, process flows, and production tooling in a high-tech aerospace environment. This position is both technical and collaborative, requiring a proactive mindset, precision in execution, and a continuous improvement approach to support operational excellence across manufacturing projects. Responsibilities You will be engaged in all mechanical aspects of our projects, including but not limited to: • Prepare, review, and validate technical and process documentation, including work orders, Declared Process Lists (DPL), Manufacturing Flow Charts (MFC), and project-specific instructions., • Manage and coordinate the manufacturing dossier, ensuring close collaboration between Design Engineering, Systems Engineering, and Manufacturing teams., • Ensure compliance with the general documentation procedure (MAP General Procedure), maintaining document version control, traceability, and proper storage., • Coordinate and supervise the generation and revision of drawings, technical blueprints, records, and auxiliary documentation, strictly following established review and approval procedures., • Lead continuous improvement actions by identifying, validating, and implementing enhancements in manufacturing processes, tools, jigs, and facilities., • Collaborate with the Quality team to ensure manufacturing compliance with aerospace standards and project requirements. Education and Requirements To be considered for this position, candidates should meet the following requirements: • University degree in Industrial, Aerospace, Electronics, Mechanical, or Mechatronics Engineering, or a related field., • At least 2 years of professional experience in manufacturing or process engineering, preferably within the aerospace or high-tech industry., • Experience working with structured documentation procedures and production workflows., • Knowledge of industrial standards and best practices (e.g., Lean Manufacturing, Six Sigma) is valued., • Advanced English proficiency (spoken and written) is required for daily communication and technical documentation. Technical Competencies Candidates should demonstrate strong knowledge and experience in the following areas: • Solid understanding of manufacturing processes and technical documentation., • Experience in process optimization, continuous improvement, and industrial efficiency initiatives., • Familiarity with digital documentation platforms, process flow tools, and CAD/CAM software., • Attention to detail, structured working style, and ability to work cross-functionally with technical teams., • Knowledge of aerospace or high-tech production standards and validation procedures is valued. Soft skills We are looking for candidates who bring the following attributes: • Teamwork and collaboration in multidisciplinary environments., • Creativity and innovative thinking to solve technical challenges., • Customer orientation and a strong sense of responsibility., • Results-driven mindset and a proactive attitude towards objectives., • Ability to motivate and collaborate effectively with the engineering team., • Strong problem-solving skills and adaptability in dynamic, deadline-driven environments. What we offer • A full-time, on-site role based in Málaga, Spain., • Immediate start date., • Joining a multidisciplinary and highly qualified team., • Working on exciting international projects in the space sector., • Relocation package for national and international mobility., • Opportunities for professional development and career growth. Ready to Shape the Future of the Space Industry? If you're passionate about electronics and space technology and want to join a fast-growing, innovation-driven company working on high-impact international projects, DHV Technology is your place. Apply now and be part of the future of space. xcskxlj We’re waiting for you! Basic data protection information The data provided in this selection process will be communicated to DHV Technology for the purpose of including your application in current or future recruitment processes, as well as to keep them informed of job offers that may fit their job profile. You can exercise your data protection rights by sending an email to Further information on data protection in the Privacy Policy:

Overview Habilidades, experiencia, cualificaciones... Si tiene el perfil adecuado para esta oportunidad, asegúrese de inscribirse hoy mismo. Keysight is at the forefront of technology innovation, delivering breakthroughs and trusted insights in electronic design, simulation, prototyping, test, manufacturing, and optimization. Our ~15,000 employees create world-class solutions in communications, 5G, automotive, energy, quantum, aerospace, defense, and semiconductor markets for customers in over 100 countries. Learn more about what we do. Our award-winning culture embraces a bold vision of where technology can take us and a passion for tackling challenging problems with industry-first solutions. We believe that when people feel a sense of belonging, they can be more creative, innovative, and thrive at all points in their careers. Keysight’s ADCS team delivers tailored test and measurement solutions to leading Aerospace and Defense customers, with over 20 years of profitable growth. Operating globally, we collaborate closely with customers to design and implement custom hardware/software systems - primarily in radar, satellite, and mission-critical domains. From initial inquiry to final delivery, our multi-disciplinary team engages across engineering, sales, and services to turn complex technical requirements into high-impact solutions that drive customer success and business growth. Responsibilities As a System Design Engineer in Keysight’s Aerospace & Defense Custom Solutions (ADCS) group you will work as part of a highly talented and passionate multi-discipline team that develops and delivers world class custom test solutions. You will utilize your technical expertise, innate curiosity and creativity to gain a deep understanding of customer needs, map out customer requirements and propose solutions. You will architect, design and develop solutions prior to delivery. You will be joining our newly formed team in Malaga, with strong connections to the existing Edinburgh and Loveland sites. You will ultimately be responsible for designing RF test solutions to interface to and make complex measurements on customer devices (such as radar and satellite systems and subassemblies), leveraging the latest test equipment from Keysight and 3rd parties. You will contribute throughout the project lifecycle; from proposal to acceptance and you will frequently and directly collaborate with customers at a technical level. In addition to Keysight's core global benefits, we offer an outstanding combined benefits/compensation package that includes: • Flexible Working Scheme, • Monetary Benefits, • Keysight Result Bonus, • Stock Purchase Plan, • Group Insurance, • Internal and external training opportunities, • Lunch vouchers, • 24 days’ vacation plus bank holidays, • Gym Funding Qualifications • Bachelors or Masters Degree in Electrical & Electronic Engineering (or equivalent), • Demonstrated experience of 5+ years in a relevant field, • Experience of using test and measurement equipment, • Working knowledge of RF design and test:, • Transmitter and receiver design principles; radio propagation and antenna principles; modulation, • Measurements: Power Meter, Spectrum Analyzer, Network Analyzer, Time Domain, Calibration. xcskxlj, • Working knowledge of analog and digital electronics design and test:, • Analog / high speed digital design principles, • Serial / parallel communications standards, • Schematic capture, circuit layout fundamentals Nice to have: • Block diagram development against requirements, • System and sub-system interface definition, • Appreciation of software design and development The successful applicant will also have: • Outstanding verbal and written communication abilities including fluency in Spanish and English and ideally one further common European language such as French, German or Italian, • Ability to work collaboratively within a team and directly with customers, • A passion and proven ability for practical problem-solving, • A methodical and thorough approach to documentation and test, • Knowledge of project management and business processes, • The versatility needed to efficiently switch between activities and adopt roles as each project requires. Careers Privacy Statement Keysight is an Equal Opportunity Employer

Lead Electrical & Electronic Hardware Engineer (Electric Propulsion) Location: Spain ✛ This role is being managed exclusively by HYTE on a retained basis ✛ Direct applications and confidential enquiries are welcomed ✛ Overview ✛ HYTE is supporting an innovative electric aviation company developing next-generation electric propulsion systems for regional aircraft. The organisation is at the forefront of enabling zero-emissions aviation, with programmes spanning aircraft conversion, propulsion integration and certification. As part of its continued growth, the company is seeking a Lead Electrical & Electronic Hardware Engineer to take ownership of hardware development across propulsion systems. This is a dual-responsibility role, combining: • Hands-on engineering delivery (design, integration, V&V), • Certification ownership and authority interface (EASA, DO-254, DO-160G) The successful candidate will play a central role in defining and delivering certifiable hardware systems, working across the full lifecycle from architecture through to qualification and approval. ✛ Key Responsibilities ✛ Lead the end-to-end development of electrical and electronic hardware systems, from requirements through design, integration, verification and certification. Define hardware architectures across propulsion-related systems, ensuring alignment with safety and certification requirements. Act as technical authority for E&E hardware across the programme, supporting design decisions and trade-offs. Own hardware certification activities, including compliance with DO-254, DO-160G, ARP4754A and ARP4761. Interface directly with certification authorities (EASA), supporting audits, documentation and approval processes. Lead and mentor hardware engineering activities, ensuring delivery against programme milestones. Coordinate closely with systems, software, propulsion and certification teams to ensure integrated system delivery. Drive development of hardware across key subsystems, including: • Battery Management Systems (BMS), • Power Distribution Units (PDU / HVPDU), • Inverter and power electronics systems Oversee detailed design activities including schematics, PCB layout, integration and validation. Ensure robust design practices covering EMI/EMC, environmental constraints, grounding, bonding and safety. Support system-level architecture definition, including HV wiring, connectors, harnesses and protection strategies. Lead verification, validation and analysis activities using simulation and hardware tools. Maintain full hardware traceability and certification evidence in line with aviation standards. ✛ Candidate Profile ✛ Degree in Electrical or Electronic Engineering (Bachelor’s or Master’s). Minimum ~5 years’ experience in hardware development within safety-critical environments. Proven experience across the full hardware lifecycle, from architecture through to qualification. Strong knowledge of aviation certification standards, including: • DO-254 (hardware design assurance), • DO-160G (environmental & EMC), • ARP4754A / ARP4761 (system development & safety) Hands-on experience developing propulsion-related hardware systems, such as: • BMS, PDU, HVPDU, inverters, • High-voltage sensing (voltage, temperature), • Protection systems and safety functions, • Communication interfaces and system integration Strong understanding of electrical propulsion architectures, including: • HV distribution, wiring and connectors, • Grounding and bonding strategies, • System-level EMI/EMC considerations Practical experience with EMC design and testing in aerospace environments (DO-160G) Experience with power electronics design, including thermal management and IGBT / SiC devices Proficiency with hardware design and simulation tools such as: • Altium Designer, • LTSpice, PLECS, PSIM or equivalent, • MATLAB (desirable) Experience with FMEA / FMECA and safety-driven design approaches. Strong communication skills, with ability to interface across engineering teams and external authorities. Professional working proficiency in English. Experience in aerospace, electric propulsion, eVTOL or advanced mobility environments is highly desirable. ✛ Take your career to new HYTEs ✛ Opportunity to play a key role in shaping certifiable electric propulsion systems for next-generation aircraft. High-impact technical leadership position within a fast-scaling aviation programme. Direct exposure to certification authorities and aircraft-level system integration. Broad scope across hardware, systems and propulsion engineering. Collaborative, engineering-led environment with strong technical ownership. Competitive salary, flexible working and long-term incentive participation.

Join DHV Technology and Be Part of the Vanguard in Space Technology La descripción completa del puesto cubre todas las habilidades asociadas, la experiencia previa y cualquier cualificación que se espera que tengan los solicitantes. Launch your career with a company that’s building the future beyond Earth. At DHV Technology, our mission is clear: to accelerate space exploration by delivering innovative power solutions that drive missions across the globe. We are a Spanish company headquartered in Málaga, with a strong international presence and a leading position in the design and manufacturing of solar panels and power systems for space applications. With clients in over 40 countries, our technology is already orbiting Earth and beyond, making DHV Technology a global reference in the aerospace industry. Working here means joining a unique sector where every project has a global impact and the potential to shape the future of humanity. We develop solutions for satellites and space missions, including deployable solar arrays and advanced power systems that store and manage energy for groundbreaking projects. Innovation, customer orientation, and excellence are the core values driving our continuous growth and keeping us at the forefront of space exploration. What is it like to be a Senior Electronics Engineer at DHV Technology? As a Senior Electronics Engineer, you will be part of our Electronics Department, playing a critical role in the design, manufacturing, and integration of custom electronic components for power subsystems used in satellites. This is a unique opportunity to work hands-on with cutting-edge aerospace technology and contribute directly to commercial space missions. You will be involved in all stages of product development, from requirements definition to testing and validation, ensuring high-performance systems for real-world space applications. Responsibilities • Analyze customer and product specifications and requirements., • Design electronic schematics using Altium Designer., • Layout and route Printed Circuit Boards (PCBs)., • Develop and implementing power converters., • Prototype and functionally test hardware., • Define and execute test procedures for component validation. Education and Requirements • Degree in Aerospace, Electronics, Electrical, Industrial, Telecommunications, or Mechatronics Engineering., • 3–5 years of experience in a similar position., • Fluency in spoken and written English. Technical Competencies Experience in some of the following areas is expected: • Embedded software development for microcontrollers or microprocessors., • FPGA design (VHDL or Verilog)., • Debugging of digital communication protocols (e.g., Ethernet, CAN Bus)., • Circuit simulation using SPICE tools., • Basic understanding of EMI/EMC requirements., • Knowledge of RF concepts., • Familiarity with motor control systems., • Expertise in Altium Designer., • Programming in C, C++, and Python. Soft Skills We are looking for candidates who bring the following attributes: • Teamwork and collaboration in multidisciplinary environments., • Creativity and innovative thinking to solve technical challenges., • Customer orientation and a strong sense of responsibility., • Results-driven mindset and a proactive attitude towards objectives., • Capacity to motivate and cooperate with the rest of the engineering team. What we offer • A full-time, on-site role based in Málaga, Spain., • Immediate start date., • Joining a multidisciplinary and highly qualified team., • Working on exciting international projects in the space sector., • Relocation package for national and international mobility., • Opportunities for professional development and career growth. Ready to Shape the Future of the Space Industry? If you're passionate about electronics and space technology and want to join a fast-growing, innovation-driven company working on high-impact international projects, DHV Technology is your place. Apply now and be part of the future of space. xcskxlj We’re waiting for you! Basic data protection information The data provided in this selection process will be communicated to DHV Technology for the purpose of including your application in current or future recruitment processes, as well as to keep them informed of job offers that may fit their job profile. You can exercise your data protection rights by sending an email to Further information on data protection in the Privacy Policy:

Healthcare IT Consultant – Interoperabilidad & Data (BI) ¿Tiene las habilidades necesarias para este puesto? Lea todos los detalles a continuación y presente su candidatura hoy mismo. ICP Ingenieros S.A. | Pamplona / Aragón y Alrededores (híbrido) | Jornada completa | Indefinido Tu trabajo tendrá impacto real. En ICP Ingenieros desarrollamos e implantamos soluciones tecnológicas para hospitales y laboratorios clínicos. Buscamos un/a consultor/a IT con mentalidad práctica, buena comunicación y ganas de participar en proyectos exigentes que mejoran procesos clínicos y apoyan el diagnóstico. ¿Qué harás? Trabajarás en la implantación y evolución de soluciones para Laboratorio Clínico (Laboratory Information System y sistemas de Analítica Avanzada/BI), adaptando la configuración a los flujos del laboratorio y asegurando la integración con sistemas hospitalarios y equipamiento. Tras la puesta en marcha, participarás en el mantenimiento técnico/funcional, garantizando un alto nivel de servicio al cliente. Podrás asumir diferentes roles dentro del proyecto (consultoría de sistemas, consultoría de aplicaciones, liderazgo de tareas). Requisitos (imprescindibles) • Titulación universitaria en Ingeniería Biomédica, Ingeniería Informática, Telecomunicaciones, Electrónica, o similar., • Preferiblemente experiencia de 1 - 2 años en consultoría IT, sistemas o integración., • Conocimientos en Windows Server y/o Linux, virtualización y bases de datos (SQL Server, Oracle, MySQL, Sybase)., • Experiencia en SQL y orientación a análisis de datos., • Conocimientos de integración/protocolos en entornos sanitarios (HL7, ASTM, XML) y/o motores de integración (valorable Mirth)., • Experiencia o familiaridad con herramientas de BI (Power BI, Qlik, u otras)., • Inglés intermedio (recomendable alto). Se valorará muy positivamente • Interoperabilidad semántica: LOINC, SNOMED CT, OMOP, openEHR (y/o FHIR)., • Experiencia en desarrollo/tecnologías web o integración: APIs, .NET, Java, Javascript (u otros). Qué ofrecemos Proyectos con impacto, aprendizaje continuo en Health IT, equipo cercano y dinámico, modalidad híbrida y plan de desarrollo. Healthcare IT Consultant – Interoperability & Data (BI) ICP Ingenieros S.A. | Pamplona / Aragón (hybrid) | Full-time | Permanent Technology with real impact. At ICP Ingenieros we deliver IT solutions for hospitals and clinical laboratories. We are looking for a hands-on, communicative IT Consultant to join challenging projects that improve clinical processes and support patient care. What you will do You will implement and evolve Clinical Laboratory solutions (Laboratory Information System and Advanced Analytics/BI), configuring and adapting them to laboratory workflows and ensuring interoperability with Hospital Information Systems and laboratory equipment. After go-live, you will contribute to technical/functional maintenance and service excellence. Depending on the project, you may take on different roles (systems/applications consulting, task leadership). Must-have • University degree in Bachelor’s Degree in Biomedical Engineering ,Computer Engineering, Telecommunications, Electronics, or similar., • 1–2 years of experience in IT consulting, systems, or integration is preferred., • Knowledge of Windows Server and/or Linux, virtualization, and databases (SQL Server, Oracle, MySQL, Sybase)., • SQL skills and a data-analysis mindset., • Healthcare integration/protocol knowledge (HL7, ASTM, XML) and/or integration engines (e.g., Mirth as a plus)., • Experience or familiarity with BI tools (Power BI, Qlik, or similar)., • Intermediate English (higher level recommended). Highly valued • Semantic interoperability: LOINC, SNOMED CT, OMOP, openEHR (and/or FHIR)., • Experience with development/integration technologies: APIs, .NET, Java, Javascript (or similar). xcskxlj What we offer High-impact projects, continuous learning in Health IT, a collaborative team, hybrid work model, and career development.

The Opportunity We are looking for a Planning Engineer to join our operations team, responsible for production scheduling, resource allocation, and the end-to-end Sales & Operations Planning (S&OP) process. In this role, you will act as a key interface between Sales, Supply Chain Management (SCM), and Production, ensuring that demand forecasts are translated into an optimized and executable manufacturing plan. This position has a direct impact on business performance, as production planning is closely linked to revenue planning and overall operational capacity. How You’ll Make an Impact • Develop and maintain the master production schedule, optimizing manufacturing capacity and minimizing lost production slots., • Translate sales forecasts and pipeline demand into executable production and purchasing plans in coordination with SCM., • Allocate production resources and adjust schedules based on constraints, delays, or operational changes in collaboration with Production., • Act as the main point of contact between Sales, Production, and SCM departments., • Monitor execution of production plans, identifying risks, bottlenecks, and deviations, and implementing corrective actions., • Prepare regular reporting for senior management, including KPIs, production status, and risk analysis. Your Background • Engineering degree preferred (not mandatory)., • Experience in production planning or manufacturing scheduling in multidisciplinary environments., • Strong understanding of production planning systems and S&OP processes., • Ability to manage high-level planning activities with direct impact on business decisions and revenue planning., • Knowledge of power electronics or converters is a plus, but not required in depth., • Strong analytical, coordination and communication skills, with C1–C2 English level (mandatory). About Us We are an industrial and technology-driven organization focused on delivering high-performance manufacturing and engineering solutions across complex, multidisciplinary environments. Our operations integrate Sales, Supply Chain, and Production functions to ensure efficient execution of demand-driven manufacturing plans, while maintaining high standards of quality, reliability, and operational excellence. We work in a dynamic environment where planning plays a critical role in aligning business strategy with production capability and customer demand. Join us!

Responsibilities: Si desea saber un poco más sobre esta oportunidad, o está considerando presentar su candidatura, por favor, lea la siguiente información del puesto. 1. Serve as the primary technical expert for our Power Conversion System (PCS) and energy storage solutions, engaging directly with clients and sales teams., 2. Analyze customer requirements and design competitive, tailored technical proposals and system schematics for energy storage projects., 3. Lead the technical preparation for bids and tenders, ensuring high-quality and compliant submissions., 4. Conduct market and competitor analysis to provide insights for strategy and product positioning in the market., 5. Act as the key technical liaison between Sales, R&D, and Project Delivery teams throughout the sales cycle., 6. Provide technical training and support to sales staff, partners, and key clients., 7. Represent the company at industry events and conferences to promote technical expertise and solutions. Requirements: 1.Bachelor's degree or higher in Electrical Engineering, Power Electronics, or a related field. 2.Minimum 3 years of experience in a pre-sales, technical support role within energy storage PCS. 3.Solid understanding of Battery Energy Storage Systems (BESS) applications and standards. 4.Full professional proficiency in English (written and spoken) is mandatory. 5.Excellent communication, presentation, and interpersonal skills. xcskxlj 6.Self-motivated, results-oriented, and willing to undertake frequent travel.

At Indra, we drive technology that protects the future Si le interesa solicitar este empleo, por favor, asegúrese de cumplir los siguientes requisitos que se enumeran a continuación. We are looking for Airborne Radar Product Engineers to join strategic air defence programmes, taking part in the design, development and qualification of airborne radar systems with national and international impact. If you are passionate about engineering, radar technology and complex, high‑criticality systems, this opportunity is for you. Your mission You will play a key role throughout the airborne radar product lifecycle, with responsibilities including: • Leading and coordinating activities across the airborne radar product lifecycle., • Definition, management and compliance of product requirements., • Participation in the design, development, integration and qualification of radar systems., • Preparation of test plans, procedures and technical reports., • Participation in design reviews and follow‑up meetings in international environments., • Root cause analysis and definition of corrective actions., • Management of non‑conformities and resolution of complex technical issues., • Close collaboration with multidisciplinary teams to ensure the highest standards of quality and performance in international radar projects. What we are looking for • Minimum 3 years of experience in complex electronic product engineering environments., • Knowledge and/or experience in one or more of the following areas:, • Power electronics and reliability., • Radiofrequency and electronics., • Digital electronics, firmware, processors and SoC., • Integration and testing of complex electronic equipment., • EMI/EMC and environmental qualification., • Experience in:, • Requirements management (DOORS)., • Verification and validation activities., • Interpretation of electronic schematics and mechanical documentation., • Root cause analysis and corrective action definition., • Strong analytical and problem‑solving skills., • Intermediate English level (minimum B2), written and spoken., • Eligibility to obtain security clearance up to NATO Secret. Valuable experience • Previous experience in international radar programmes., • Knowledge of DO‑254 and DO‑178C civil standards. Academic background • Degree in Telecommunications Engineering, Electronics Engineering or related fields., • Other technical profiles will also be considered if requirements are met. What we offer • Stability and long‑term perspective Long‑term projects in a leading Defence and Technology company with more than 50,000 professionals. • Innovative, high‑impact projects Cutting‑edge technologies and strategic challenges with national and international impact. • Close and transparent work environment Open communication, accessible teams and a collaborative culture. • Autonomy and flexibility Hybrid working model that genuinely supports work‑life balance. • A career plan tailored to you Designed according to your professional development, potential and interests. • Continuous learning Access to Open University and Udemy for Business, with more than 6,000 courses. • Benefits and wellbeing Discounts on gyms, restaurants, leisure activities, retail and much more. • Competitive compensation Complemented by flexible compensation plans adapted to your needs. Our selection process 1. Profile review We review your experience and assess your potential fit for the role. 2. Initial contact (5–10 minutes) If you receive a call from an unknown number… it’s probably us! 3. Technical interview You will meet the team, learn more about the project, and complete technical and competency‑based assessments (including English, if applicable). 4. Offer and welcome If there is a mutual match, we will be delighted to welcome you to Indra! Commitment to equality At Indra, we promote a work environment based on respect, dignity and real equality. We guarantee a space free from discrimination based on gender, age, disability, sexual orientation, gender identity or expression, religion, ethnicity, marital status, or any other personal or social circumstance. xcskxlj INDRA is a Top Employer 2026! Join one of Spain’s best employers, recognised for its talent policies, organisational culture and exceptional working conditions.

Company Description: ¿Todo listo para enviar su solicitud? Asegúrese de comprender todas las responsabilidades y tareas asociadas a este puesto antes de continuar. Aistech Space is focused on generating affordable, recurrent, high resolution thermal imagery of the planet to provide a new perspective of Earth’s changing resources. The company is based in Barcelona and aims to revolutionize remote sensing for environmental monitoring and resource management. What you will do: Aistech Space is looking for an entry-level Satellite HW Electronics Engineer to be part of the Space Infrastructure Team designing, analysing, integrating and testing new electronic subsystems for the new satellites of our constellation as well as developing the highest-tech payloads electronics and ground hw support equipment for testing. This new position offers the opportunity to rotate through each development engineering phase: design and analysis, integration and testing of all our Hardware (HW) projects. In this role, you will be responsible for managing hardware procurement and documentation, and coordinating internal resources to produce flight-qualified hardware for our space projects. The main responsibility for this job position is working closely with your HW electronics peers to deliver the next generation of payload electronics such as daughterboards, sensor boards, proximity sensor boards, cable development kits, automatic test benches, in order to deliver the payloads to each satellite mission. You will also be responsible to follow internal standards and good practices in terms of project management, documentation and time management following an agile approach in your daily work and ensuring the team is also doing it. The key objectives to be achieved are: • Understand Aistech Space mission objectives., • Work closely with the space infrastructure development team., • Design and development of high-density electronic circuits, from initial requirements and schematic design to complex multi-layer PCB layout., • Collaborate across teams to integrate payloads into the satellite platform, managing power budgets, high-speed data buses (SoC/FPGA), mechanical interfaces and technical risk analysis., • Design, build, and maintain advanced electronic test benches to validate payloads and full satellite systems against LEO environment requirements., • Provide low-level technical guidance to interdisciplinary teams (Optics, Firmware, Systems) and research emerging technologies to keep our space infrastructure at the cutting edge., • Work with partners and suppliers to evaluate technical proposals, ensuring they align with our mission objectives and quality standards., • Define rigorous testing procedures, maintain BOMs, and contribute to the company’s internal technical specifications. Who you are: Must: • BSc/MSc degree in Electronics Engineering or a relevant field., • Professional experience - 3 years minimum, • Open-minded, proactive learner, and receptive to criticism., • Strong proficiency in end-to-end Hardware Design—from schematic capture to complex multi-layer PCB layout., • Proven track record in DC/DC converter design and Power Distribution Networks (PDN) for sensitive electronics., • Proficiency with standard interfaces and protocols (CAN, I2C, RS422/485, GNSS, etc.), • Experience in the design with digital and analog components (SoC, MCU, FPGA, ADC, DAC, etc.)., • Experience in electrical analysis, functional testing at the system level, and laboratory debugging (soldering, Oscilloscopes, Spectrum Analyzers, …)., • Proven experience designing for high-reliability environments, with specific focus on mechanical robustness against launch vibrations/shocks and thermal management for extreme temperature cycling in vacuum conditions., • Knowledge of Agile methodologies., • Fluent in English. Nice to have: • Advanced knowledge of High-Speed Design (DDR3/DDR4 memory routing, LVDS, Ethernet, PCIe…), including impedance control and signal integrity., • Experience in electronics harnessing and complex system assembly., • Familiarity with EMC/EMI compliance, ideally following ECSS, MIL-STD or similar high-reliability standards., • Ability to navigate low-level C code or VHDL to support cross-departmental debugging, ensuring hardware designs align perfectly with embedded software and FPGA requirements. What You’ll Gain by Joining Us Be part of a passionate, collaborative, and respectful team. Enjoy a stable, permanent contract with a fast-growing company. Flexible working hours and hybrid work: 6 days/month from home. Competitive salary and flexible retribution through Cobee. Free access to paddle tennis courts and an on-site gym. Daily fresh fruit and coffee to keep you energized. Work in an international, diverse environment. 23 vacation days, plus Birthday, December 24 & 31 off. Where you will be: You will be working in the Barcelona HQ in Sant Cugat. To be considered for this position, you must already have the legal right to work in the European Union. xcskxlj We are unable to provide visa sponsorship.

The opportunity As an Electrical Design Engineer, you will be responsible for the electrical design and development of industrial equipment, ensuring compliance with technical specifications, international standards, and product requirements. You will actively contribute to product optimization, innovation, and validation throughout the development lifecycle, working closely with multidisciplinary teams. Lea el resumen de esta oportunidad para comprender qué habilidades, incluidas las habilidades interpersonales relevantes y el dominio de paquetes de software, se requieren. How you’ll make an impact • Execute Electrical Design: Develop electrical designs for industrial equipment using EPLAN to meet product and technical specifications., • Size Electrical Systems: Perform sizing of LV and MV electrical systems, components, and cabinets., • Select Components: Choose electrical components based on technical requirements and justificatory calculations., • Apply Standards: Analyze and extract requirements from applicable international standards., • Prepare Documentation: Create electrical drawings, wiring diagrams, validation reports, manuals, and technical documentation., • Optimize Products: Contribute to electrical optimization and value engineering activities., • Support Innovation: Provide technical input to product development and innovation initiatives., • Prototype Implementation: Support and participate in the implementation and validation of prototypes. Your background • Bachelor’s degree in Engineering or equivalent., • Experience in electrical design of industrial equipment or facilities using electrical design tools., • Professional experience with EPLAN, SolidWorks Electrical, or similar., • User-level knowledge of Office tools (Excel, Word, Visio, Project, etc.)., • Fluent in Spanish and English (at least C1)., • Experience in sizing LV and MV electrical systems, components, and cabinets., • Knowledge of battery fuse selection and safety regulations is a plus., • Experience in electrical systems and power electronics design is a plus., • Experience in value engineering activities is a plus., • At least 3 years of relevant professional experience is desirable. More about us • You will work on technically challenging and meaningful projects within a collaborative and innovative environment., • We support continuous learning and professional development, encouraging growth at every stage of your career., • We foster a culture of collaboration, diversity of thought, and technical excellence. xcskxlj, • Join a team where your expertise, ideas, and initiative contribute directly to the development of high-quality, innovative products.

Senior Electronic Engineer At DAS Photonics, we don't just imagine the future of satellite and photonic technology: we build it. We are looking for a Senior Hardware Engineer with a strong focus on PCB Layout to join our elite Space team in Valencia. Los candidatos deben tomarse el tiempo de leer atentamente todos los elementos de este anuncio de empleo. Por favor, envíen su solicitud sin demora. Key Responsibilities A technical profile with a system-level vision, detail-oriented in physical implementation, and eager to lead critical designs. • Experience: Minimum +7 years in electronic design (Space, Defense, or high-reliability sectors)., • Layout Mastery: Proven experience in the physical design of complex PCBs (multilayer, signal integrity, impedance control, and thermal management)., • Education: Degree in Electronic, Telecommunications, Industrial Engineering, or similar., • Hard Skills:, • Analog, digital, or power electronics design., • Proficiency in EDA tools: Altium Designer (preferred), Mentor/Xpedition, or KiCad., • Familiarity with quality and design standards (ECSS / MIL-STD)., • Languages: Fluent English (international project environment). About You • Full Design Cycle: From architecture and schematics to final Layout and manufacturing file generation., • Critical Analysis: Detailed analysis (WCA, PSA, radiation analysis) to ensure mission success., • Validation: Commissioning and testing of embedded systems in the lab., • Innovation: Integrating photonic solutions into advanced electronic hardware. If you are ready to take part in shaping the future of space photonics, apply now and join our mission. We guarantee equal opportunity in access to this position. In areas where women or men are underrepresented, we actively work to promote greater balance. Ingeniero Electrónico Senior Responsabilidades Principales Un perfil técnico con visión de sistema, detallista en la implementación física y con ganas de liderar diseños críticos. • Experiencia: Mínimo +7 años en diseño de hardware (sector Espacio, Defensa o entornos de alta fiabilidad)., • Maestría en Layout: Experiencia real en el diseño físico de PCBs complejas (multicapa, integridad de señal, control de impedancias y gestión térmica)., • Formación: Ingeniería Electrónica, Telecomunicaciones, Industrial o campos afines., • Hard Skills:, • Diseño de electrónica analógica, digital o de potencia., • Dominio de herramientas EDA: Altium Designer (preferible), Mentor/Xpedition o KiCad., • Conocimiento de estándares de calidad y diseño (ECSS / MIL-STD)., • Idiomas: Inglés fluido (entorno de proyectos internacionales). Requisitos • Ciclo completo de diseño: Desde la arquitectura y el esquema hasta el Layout final y la generación de archivos de fabricación., • Análisis Críticos: Realización de análisis detallados (WCA, PSA, análisis de radiación) para garantizar el éxito de la misión., • Validación: Puesta en marcha y testing de sistemas embebidos en laboratorio., • Innovación: Integración de soluciones fotónicas en hardware electrónico avanzado. Si te apasiona la tecnología fotónica y el sector espacial, únete a nuestra misión. Garantizamos la igualdad de oportunidades en el acceso a este puesto. xcskxlj En aquellas áreas en las que haya menos representación de mujeres u hombres, trabajamos activamente para fomentar un mayor equilibrio.

Job Description: ¿Es este su próximo empleo? Descúbralo leyendo la descripción completa a continuación y no dude en enviar su candidatura. 1. Responsible for the Sales of TBEA Solar Inverter and Power Station Solutions（both central and string inverter）, BESS solution, Statcom, Micro-grid, SCADA and TB-eCloud services in utility scale solar projects., 2. Develop and maintain strong relationship with the key accounts, organize and coordinate company resources to fully understand customers' requirements, help customer to optimize the design and improve LOCE., 3. Make in-time market investigation and report to company, giving suggestions on company’s market development and approach strategy to the key accounts;, 4. Help to optimize company's sales, technical support, delivery and service procedures to improve customer satisfaction to get stable and long term customer support;, 5. Payment collection; Requirements: 1.Bachelor in sales, electronics, electrical, engineering or renewables, minimum 3-years of sales or business development experience in utility scale solar projects, having strong relationship with the key accounts. 2.Excellent teamwork player is a basic and must, and always target oriented. 3.Excellent communication skills and able to listen to customer’s requests carefully with patience, and strong coordination ability to lead the team to meet customer’s requirements. 4. Very good understanding of the local renewable policies., 5. Strong sense of risk control in daily operations. xcskxlj, 6. Solar inverter, solar module sales and project development related experience is preferred.

FERCHAU Spain, provee servicios de ingeniería avanzada en el sector aeroespacial, automoción, ferroviario, IT, maquinaria industrial y plantas.Formamos parte de un grupo alemán fuertemente consolidado, reconocido por ser uno de los líderes de la ingeniería alemana y con presencia en Alemania, A

Con SAFTI puedes abrir tu propio negocio inmobiliario digital!.Desarrolla tu negocio escalable en el sector inmobiliario a nivel internacional y crea un equipo para generar una estructura sólida que te permita disparar tus ingresos de forma ilimitada, con todo el soporte y la infraestructura de una

Cuatrecasas, firma de abogados internacional con marcada implantación en España, Portugal y América Latina, cuenta con un equipo multidisciplinar y diverso de más de 1.Con las personas siempre en el centro, en Cuatrecasas incorporamos profesionales del más alto potencial, valorando la diversida

Somos un grupo empresarial multinacional, diversificado, innovador y sostenible.Contamos con más de cien años de experiencia en la construcción, promoción y desarrollo de grandes proyectos de infraestructuras y servicios en Europa, Oriente Medio y Latinoamérica.Nuestras líneas de negocio más

With over a century of pioneering mission-critical technologies, including high-voltage transformers, automation, and power electronics, we are addressing the most urgent energy challenge of our time – balancing soaring electricity demand while decarbonising the power system. Hitachi Energy is a g

Profesionales Técnicos para el Sector Naval (H/M) para nuestras oficinas de Sevilla, Madrid, Ferrol, Vigo, El Puerto de Santa María y Cartagena, en las siguientes áreas:.Completaremos formación profesional junto a nuestro equipo desde el inicio.Buscamos a personas con ganas de iniciarse y crecer

Cox se construye sobre el compromiso de un equipo humano dedicado a la sostenibilidad y al progreso a largo plazo.Para el negocio de Energía, buscamos incorporar un/a Coordinador/a de Ofertas para plantas híbridas PV/BESS, que se integrará dentro del equipo multidisciplinar de sistemas de almacen

With over a century of pioneering mission-critical technologies, including high-voltage transformers, automation, and power electronics, we are addressing the most urgent energy challenge of our time – balancing soaring electricity demand while decarbonising the power system. R&D Power Electronics

Desde Adecco Selección buscamos un/a técnico/a para realizar atención y asesoramiento de clientes para un importante fabricante de sistemas inteligentes de control de climatización.El objetivo del puesto sería prestar asesoramiento energético a clientes finales de mercado francés mediante el

Buscamos profesionales del sector inmobiliario con ambición de crecer, con fuerte orientación comercial y mentalidad de resultados, que quieran dar un salto de nivel y construir una carrera a medio y largo plazo dentro de una consultora especializada en activos de inversión de alto valor.Trabajar

Tienes experiencia en el sector aeronáutico y espacial? ¿Has trabajado con documentación técnica aeronáutica? ¿Has trabajado con documentación de mantenimiento aeronáutico? ¿Has trabajado en la redacción y modificación de manuales de mantenimiento aeronáuticos? ¿Quieres ser parte de un

This is a full-time hybrid role for a Filmmaker and AI Content Creator based in Marbella, with some flexibility for remote work.The role involves directing, producing, and editing video content, managing all aspects of film production from pre-production through post-production.Responsibilities also

The ideal candidate will exhibit high standards, excellent communication skills, and have an ability to take initiative, and prioritize daily tasks.A strong ability to take charge and meet tight deadlines will ensure your success in this multi-faceted role.Prior experience in Human Resources or team

En EAP (Europa Agricult Product) estamos creciendo, y queremos hacerlo bien: cuidando a las personas, al producto y a toda la cadena que hay detrás.Encontrar agricultores que encajen con nuestro modelo, nosotros le llamamos triple S: salud, sabor y sinceridad.Además de por supuesto solo trabajar p

Se busca esteticista con experiencia incorporación inmediata.Centro de estética Clínica Alba Asensio en Málaga zona del Limonar, busca esteticista con experiencia para incorporarse a su equipo.Experiencia demostrable en el sector minimo 2 años.Capacidad de trabajo en equipo.Conocimientos en tra

Pop Up de Liu Jo Accessories en El Corte Inglés de Marbella.Sales Assistant durante el periodo de campaña.Serás embajadora de la marca en el punto de venta, ofreciendo una experiencia de compra exclusiva y cuidando cada interacción con el cliente.Asesorar al cliente de forma personalizada y aseg