Construction engineer jobs in OrpingtonCreate job alerts

Job Type: Full-Time, Permanent Salary: Competitive Salary, Depending on Experience. Location: Bourne, Lincolnshire Depot Based. They are a market leader in the repair and maintenance of towable and static cabins that keep site teams warm, fed and safe on construction, civils and events sites nationwide. To attend, diagnose and repair mobile welfare cabins in the field restoring generators, power, heating, water and waste systems to full working order, first-time wherever possible, while working safely and unsupervised at customer sites. The role is van-based and mobile, covering breakdowns and warranty/service work across customer and hire-fleet sites. A large share of faults are diagnosed remotely (via unit telemetry) before attending, so the engineer must be comfortable interpreting remote data and arriving prepared. Generators / diesel engines - Oil pressure & oil-change faults, fuel systems, exhaust/DPF, alternator, AVR, governor, glow, E-stop, servicing. Engines: HATZ, Kubota, Lombardini, Perkins, Stephill (Boss L48/L70/L100 units). Plumbing, water & waste -Frozen/burst pipes, tanks, UV filters, water pumps, toilets, waste-level sensors, leaks. Electrical & power - 12/24V DC systems, Victron kit (inverters, Cerbo, MPPT/solar), fuses, relays, wiring looms, sockets, PIR lighting, "no power" / dead-console faults, electrical-test compliance. Diesel heaters - Parking/diesel heaters glow-pin and fuel-pump failure, re-priming, rewiring, thermostats, frost-related no-heat. Batteries - Lithium battery diagnosis (100/200Ah), BMS behaviour, Victron charge settings, deep-discharge recovery, charge/hold faults. Telemetry / comms - Units not updating/communicating SIM/modem, Cerbo, remote-monitoring diagnosis and SIM replacement. Towing & chassis - Lifting rams/pins, wheels-down locking, coupling, brakes, tyres getting units mobile. Hydraulics - Power packs, rams, solenoids for raising/lowering units. Fabrication - Doors, door closers, hoods, structural repair. Solar - Panels and MPPT charge faults. Roughly 1 in 5 reported faults turn out to be user error so customer education, clear on-site communication and honest reporting matter as much as the wrench work. Proven multi-skilled field service / plant / mobile-mechanic background (welfare units, generators, plant, HGV, marine, motorhome/leisure, or similar). Diesel engine fault-finding and servicing (small industrial engines HATZ, Kubota, Lombardini, Perkins or equivalent). 12V / 24V DC electrical competence fault-finding wiring, fuses, relays, inverters, charging systems using a multimeter. Confident reading fault data / telemetry and working from remote diagnostics. Practical plumbing / water-system repair skills. Strong problem-solving and first-time-fix mindset; comfortable working alone and unsupervised. Full UK driving licence; B+E (trailer/towing) entitlement or willingness to obtain. Good customer-facing manner and clear written job reporting. Electrical qualification City & Guilds 2391 (Inspection & Testing) and/or 18th Edition (BS 7671); PAT competence. Experience with Victron energy systems (Cerbo GX, MultiPlus inverters, MPPT, VRM) and lithium/BMS battery systems. Diesel parking/air heater experience (Webasto/Eberspcher-type). Hydraulics (power packs, rams, solenoids). Fabrication repairs. Solar PV, and basic IT/comms (SIM, modem, routers) familiarity. Relevant safety tickets (CSCS Card, first aid, working at height, manual handling). Self-motivated and reliable the customer's day-rate is stopped until the unit works again. Methodical and safety-first, especially around live electrics, fuel and lifting operations. Resilient and adaptable outdoor, all-weather, sometimes remote sites. Honest reporter records what was found and done, including when a fault is user error or unresolved. Field-based, mobile role with company van and tools. Regional travel to customer and hire sites; some early starts / site-hours working. Breakdown-response element may include on-call / out-of-hours cover (to be confirmed). Physical role: lifting, working outdoors, in confined welfare-unit plant spaces and all weathers. • Competitive salary (depending on experience)., • Company pension., • Company van, tools and PPE., • Manufacturer and in-house training across generators, power, heating and telemetry., • Varied, hands-on work with a UK manufacturer that builds what you fix. The employer fully supports Equality in Employment. All employment is decided based on qualifications, merit and business need. JBRP1_UKTJ #J-18808-Ljbffr

Location: Orpington Salary: £45,000 - £55,000 DOE Working Hours: 6:00am - 4:00pm Company Vehicle: Company Van + Fuel Card Additional Benefits: Company Mobile Phone + Overtime / Additional Benefits NEOS Engineering Recruitment are working with a well-established and successful plant hire business that is looking to add an experienced Field Service Engineer to their growing team. This is an excellent opportunity for an experienced Plant Engineer / Plant Fitter / Heavy Plant Engineer who is looking for a long-term position with a reputable company, competitive salary and a well-supported working environment. You will be responsible for carrying out servicing, maintenance, inspections and repairs on a wide range of construction and plant hire equipment, working primarily across customer sites and company locations. The role would suit an engineer who has a strong background within plant hire, construction equipment, heavy plant or similar machinery environments. • Carry out planned servicing and preventative maintenance on plant and construction equipment., • Diagnose and repair mechanical, electrical and hydraulic faults., • Attend customer sites to investigate and repair breakdowns., • Complete inspections, fault finding and general condition checks., • Carry out repairs and component replacements to a high standard., • Prepare machinery for hire and ensure equipment is safe and fit for use., • Complete accurate service and inspection reports., • Identify parts and materials required for repairs., • Liaise professionally with customers while working on-site., • Maintain company vehicles, tools and equipment., • Ensure all work is completed in accordance with company health & safety procedures., • Provide a high level of customer service and represent the business professionally. You will work across a broad range of standard plant hire and construction equipment, potentially including: • Excavators, • Dumpers, • Rollers, • Telehandlers, • Loading Shovels, • Site Dumpers, • Compaction Equipment, • Generators, • Access Equipment, • Small Plant, • Other Construction & Plant Hire Machinery The successful candidate will be an experienced Plant Engineer / Plant Fitter / Heavy Plant Engineer / Field Service Engineer with a strong practical background maintaining and repairing construction or plant hire equipment. One of the following is required: • 10+ years' relevant plant engineering experience where the candidate does not hold an NVQ qualification; OR, • 5+ years' relevant plant engineering experience with an NVQ Level 2 or Level 3 qualification in Plant Maintenance, Engineering or a relevant discipline. You will ideally have experience working on a range of diesel-powered plant and construction equipment, with strong mechanical fault-finding skills and a good understanding of hydraulic and electrical systems. • Significant experience working on plant / construction equipment., • Strong mechanical engineering and fault-finding ability., • Experience with servicing, maintenance and breakdown repairs., • Ability to work independently when a #J-18808-Ljbffr

Location: Horton & West Wickham £450-£500/day Inside IR35 or Up to £75k Permanent Advance TRS are looking for an experienced Senior Project Engineer with a strong Civil Engineering background to join a major water sector delivery team. This is a fantastic opportunity to take a key role in delivering complex engineering projects, working closely with the Project Manager, design teams, site teams, supply chain and clients from design through to construction and commissioning. • Manage and coordinate design, construction and commissioning activities, • Drive project programmes, milestones, risk and cost control, • Lead design liaison and collaborative planning meetings, • Coordinate site teams, designers and supply chain partners, • Support procurement, tendering and commercial management, • Identify opportunities for innovation, improved delivery and reduced risk, • Work closely with the Project Manager and QS to monitor project performance, • Ensure projects are delivered safely, efficiently and to specification, • Strong Project Engineering / Project Management experience, • A Civil Engineering or construction-related degree/equivalent, • Experience delivering engineering projects under NEC3, • Strong understanding of CDM 2015 and H&S legislation, • Proven experience managing programmes, costs, risks and stakeholders, • Excellent communication and collaboration skills, • Water sector experience is desirable, particularly non-infrastructure, • P6, APMP or Chartered/near Chartered status would be advantageous If you’re a Civil Project Engineer ready for a senior-level opportunity where you can genuinely influence delivery, innovation and project performance, get in touch. We are an equal opportunity employer and value diversity in our company. We do not discriminate on the basis of race, religion, colour, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status. #J-18808-Ljbffr

RJ Power is looking for a Project Manager to lead and deliver maintenance and project works on time, within budget and to specification, maximising engineer utilisation to improve efficiency and reduce downtime, while building strong client relationships to support business growth and providing effective line management to technical and support staff to drive high performance. Key Responsibilities: • Review project pre‑construction information to understand the specifications and other deliverable requirements of the project, • Develop and implement core project documentation to enable the safe and efficient delivery of projects, • Create and maintain a project file for each project and retain all project documentation in accordance with our Document Control procedure, • Implement the requirements of the Clients Construction Phase Plan on site and develop core project documentation, ex: RAMS, Task Briefing Sheets and Safe Systems of Work Packs, O&Ms as required, to enable the safe and efficient delivery of projects, • Co‑ordinate project construction activity with all stakeholders to minimise risks that could jeopardise the successful delivery of the project, • Lead and undertake Project Review Meetings as necessary to keep all parties informed of:progress against delivery plan, identification of project variance and any changes to project scope, • Manage project and commercial change via standard protocol, • Amend the project delivery plan to consider changes to project scope and project variance, • Provide the client with a completed Health and Safety file as part of project hand back, • Receive a certificate of completion from the client following project hand back, • Report and undertake investigations to any accident or incident that has occurred on your project, keeping all interested parties updated on the details of the event and any actions arising from it, • Lead and manage your team by undertaking performance reviews and ensuring that each member understands their roles and responsibilities on the project, • Update and complete Key Performance Indicator requirements, • Provide line management for an allocated group of engineers or supporting/administration staff Skills & Experience Required: • Possess a professional project management qualification e.g. APM, Prince2 or equivalent, • Previous experience of working in a similar role within the electrical or construction industry, • Has a good working knowledge of CDM regulations and general health and safety legislation in respect to project delivery, • Can demonstrate a good level of commercial understanding, • Professional Project Management Qualification (AMP, Prince2, PMI Practitioner Level), • Has line management experience and can demonstrate evidence of successfully managing team performance, • Holds a full driving licence, • Can demonstrate excellent verbal, written and interpersonal communication skills with internal and external stakeholders, • Able to manage own time in an efficient and effective manner, taking into consideration key milestone deadlines, • Able to work to strict deadlines and respond to requests and enquiries in a timely manner, • Able to adhere to policy and processes, • Able to multi‑task, • Can work under pressure, be flexible and adaptable, • Excellent organisational skills and attention to detail, • Takes a proactive approach and has a willingness to contribute new ideas, • Ability to work within a team but can also take the lead where required, • Willing to take responsibility and accountability to follow tasks through to completion, • After 2 years of continuous service, 1 extra day’s leave per year, up to a maximum of 5 #J-18808-Ljbffr

Field Service Engineer – Plant Hire Location: Orpington Salary: £45,000 – £55,000 DOE Working Hours: 6:00am – 4:00pm Company Vehicle: Company Van + Fuel Card Additional Benefits: Company Mobile Phone + Overtime / Additional Benefits The Opportunity NEOS Engineering Recruitment are working with a well-established and successful plant hire business that is looking to add an experienced Field Service Engineer to their growing team. This is an excellent opportunity for an experienced Plant Engineer / Plant Fitter / Heavy Plant Engineer who is looking for a long-term position with a reputable company, competitive salary and a well-supported working environment. You will be responsible for carrying out servicing, maintenance, inspections and repairs on a wide range of construction and plant hire equipment, working primarily across customer sites and company locations. The role would suit an engineer who has a strong background within plant hire, construction equipment, heavy plant or similar machinery environments. Key Responsibilities Carry out planned servicing and preventative maintenance on plant and construction equipment. Diagnose and repair mechanical, electrical and hydraulic faults . Attend customer sites to investigate and repair breakdowns. Complete inspections, fault finding and general condition checks. Carry out repairs and component replacements to a high standard. Prepare machinery for hire and ensure equipment is safe and fit for use. Complete accurate service and inspection reports. Identify parts and materials required for repairs. Liaise professionally with customers while working on-site. Maintain company vehicles, tools and equipment. Ensure all work is completed in accordance with company health & safety procedures. Provide a high level of customer service and represent the business professionally. Equipment You will work across a broad range of standard plant hire and construction equipment , potentially including: Excavators Dumpers Rollers Telehandlers Loading Shovels Site Dumpers Compaction Equipment Generators Access Equipment Small Plant Other Construction & Plant Hire Machinery About You The successful candidate will be an experienced Plant Engineer / Plant Fitter / Heavy Plant Engineer / Field Service Engineer with a strong practical background maintaining and repairing construction or plant hire equipment. Experience Requirements One of the following is required: 10+ years' relevant plant engineering experience where the candidate does not hold an NVQ qualification; OR 5+ years' relevant plant engineering experience with an NVQ Level 2 or Level 3 qualification in Plant Maintenance, Engineering or a relevant discipline. You will ideally have experience working on a range of diesel-powered plant and construction equipment , with strong mechanical fault-finding skills and a good understanding of hydraulic and electrical systems. Essential Significant experience working on plant / construction equipment. Strong mechanical engineering and fault-finding ability. Experience with servicing, maintenance and breakdown repairs. Ability to work independently when attending customer sites. Full UK driving licence. Good communication and customer-facing skills. Ability to complete service documentation accurately. Desirable NVQ Level 2 or Level 3 in Plant Maintenance / Engineering. Previous plant hire experience. Experience with hydraulic and electrical fault finding. IPAF / PASMA / other relevant industry qualifications. Experience working on a variety of manufacturers and equipment. What's on Offer? £45,000 – £55,000 salary , depending on experience. 6:00am – 4:00pm working hours. Company van. Fuel card. Company mobile phone. Overtime opportunities. Stable, long-term employment with an established plant hire business. Variety of equipment and machinery. Ongoing training and development. Opportunity to build a long-term career within the business. Apply Now If you're an experienced Plant Engineer, Plant Fitter, Heavy Plant Engineer or Field Service Engineer looking for a new opportunity offering £45,000 – £55,000 , we'd be keen to hear from you. NEOS Engineering Recruitment specialises in engineering and technical recruitment across the plant, construction, manufacturing and engineering sectors. For more information, or to discuss the role confidentially, please contact NEOS Engineering Recruitment . TPBN1_UKTJ

Senior Electrical Project Engineer – London Salary: £80,000–£90,000 + Accommodation + Benefits Location: London Sector: MEP / Construction / Commercial Employment Type: Permanent A leading international MEP engineering and construction contractor is looking for an experienced Senior E

Fire Testing & Certification Engineer Location: Sidcup area, Greater London area The Opportunity We are looking for a meticulous Fire Testing & Certification Engineer to join our dedicated product compliance team. This role is perfect for someone who thrives on precision and wants to take hands-on ownership of the planning, execution, and documentation of fire testing across our market-leading product ranges. You will spend your days balancing complex international standards with practical product design goals. In this role, you will be the vital link between our internal design teams and external UKAS-accredited laboratories. Working at the forefront of passive fire protection as a Certification and Testing Engineer, you will ensure our lifesaving products maintain total compliance with UK, European, and international regulations while helping to support exciting new product development. What You Will Do Day-to-Day Own the testing pipeline: Assist with the planning, coordination, and preparation of rigorous fire resistance and smoke control testing programmes. Prepare samples & details: Support the build preparation, specifications, and physical product sampling for external test house audits. Manage external relationships: Liaise directly with certification bodies and test houses, such as third-party UKAS laboratories. Drive technical documentation: Prepare and maintain critical technical data sheets, declarations, fire test reports, assessments, and certification documents. Collaborate on design: Work closely with CAD, Product, and Design teams to ensure all manufactured configurations perfectly reflect tested constructions. Monitor compliance standards: Keep a close eye on regulatory updates, supporting compliance activities for standards including BS 476, EN 1634, and UL. About You You are a process-driven professional with a high attention to detail and a methodical approach to compliance. To succeed as our new Certification and Testing Engineer, you must thrive in an environment where accuracy is paramount, bring excellent technical understanding, and have the following to your name: Industry experience: A strong understanding of fire testing and compliance processes within the construction, doorset, joinery, or passive fire protection sectors. Technical standards know-how: Familiarity with relevant regulatory frameworks, specifically BS 476-22/31.1, EN 1634-1, UL 10C, and UL 1784. CAD capability: Practical experience producing and amending 2D and 3D technical CAD drawings to support testing and certification details. Organisational foundation: Strong written communication skills to produce clear, structured technical documentation, alongside the ability to manage multiple strict deadlines. Desirable extras: Previous experience with Factory Production Control (FPC) audit processes, joinery product development, or change control activities is a major plus. What Success Looks Like When you settle into the role, success as a Certification and Testing Engineer will mean seamlessly coordinating complex fire testing programmes with zero disruption to compliance timelines. You will become a trusted technical advisor to our design and production teams, ensuring our technical library is flawlessly maintained and our products remain fully certified to the highest international safety standards. What We Offer Competitive package: A rewarding salary tailored to your specific testing and passive fire protection experience. Critical safety impact: The chance to take ownership of testing programmes for high-performance products that directly protect human lives. Growth and development: Deep exposure to international certification schemes and leading-edge passive fire engineering. TPBN1_UKTJ

Location: Orpington Salary: £45,(Apply online only) – £55,(Apply online only) DOE Working Hours: 6:00am – 4:00pm Company Vehicle: Company Van + Fuel Card Additional Benefits: Company Mobile Phone + Overtime / Additional Benefits NEOS Engineering Recruitment are working with a well-established and successful plant hire business that is looking to add an experienced Field Service Engineer to their growing team. This is an excellent opportunity for an experienced Plant Engineer / Plant Fitter / Heavy Plant Engineer who is looking for a long-term position with a reputable company, competitive salary and a well-supported working environment. You will be responsible for carrying out servicing, maintenance, inspections and repairs on a wide range of construction and plant hire equipment, working primarily across customer sites and company locations. The role would suit an engineer who has a strong background within plant hire, construction equipment, heavy plant or similar machinery environments. • Carry out planned servicing and preventative maintenance on plant and construction equipment., • Diagnose and repair mechanical, electrical and hydraulic faults., • Attend customer sites to investigate and repair breakdowns., • Complete inspections, fault finding and general condition checks., • Carry out repairs and component replacements to a high standard., • Prepare machinery for hire and ensure equipment is safe and fit for use., • Complete accurate service and inspection reports., • Identify parts and materials required for repairs., • Liaise professionally with customers while working on-site., • Maintain company vehicles, tools and equipment., • Ensure all work is completed in accordance with company health & safety procedures., • Provide a high level of customer service and represent the business professionally., • Excavators, • Dumpers, • Rollers, • Telehandlers, • Loading Shovels, • Site Dumpers, • Compaction Equipment, • Generators, • Access Equipment, • Small Plant, • Other Construction & Plant Hire Machinery The successful candidate will be an experienced Plant Engineer / Plant Fitter / Heavy Plant Engineer / Field Service Engineer with a strong practical background maintaining and repairing construction or plant hire equipment. • One of the following is required: 10+ years' relevant plant engineering experience where the candidate does not hold an NVQ qualification; OR 5+ years' relevant plant engineering experience with an NVQ Level 2 or Level 3 qualification in Plant Maintenance, Engineering or a relevant discipline. • You will ideally have experience working on a range of diesel-powered plant and construction equipment, with strong mechanical fault-finding skills and a good understanding of hydraulic and electrical systems., • Significant experience working on plant / construction equipment., • Strong mechanical engineering and fault-finding ability., • Experience with servicing, maintenance and breakdown repairs., • Ability to work independently when attending customer sites., • Full UK driving licence., • Good communication and customer-facing skills., • Ability to complete service documentation accurately., • NVQ Level 2 or Level 3 in Plant Maintenance / Engineering., • Previous plant hire experience., • Experience with hydraulic and electrical fault finding., • IPAF / PASMA / other relevant industry qualifications., • Experience working on a variety of manufacturers and equipment., • £45,(Apply online only) – £55,(Apply online only) salary, depending on experience., • 6:00am – 4:00pm working hours., • Company van., • Fuel card., • Company mobile phone., • Overtime opportunities., • Stable, long-term employment with an established plant hire business., • Variety of equipment and machinery., • Ongoing training and development., • Opportunity to build a long-term career within the business. #J-18808-Ljbffr

NEOS Engineering Recruitment is seeking an experienced Field Service Engineer to join a well-established plant hire business. You will service, maintain and repair a wide range of construction plant, travelling to customer sites and company locations. The role demands strong mechanical, electrical and hydraulic fault-finding skills, experience with diesel-powered equipment, and the ability to work independently with a professional approach. #J-18808-Ljbffr

NEOS Engineering Recruitment are working with a well-established plant hire business to add an experienced Field Service Engineer to their team. This role covers servicing, maintenance and repairs on construction and plant hire equipment across customer sites and company locations. The position suits an engineer with a strong plant hire background, capable of executing planned servicing, fault finding and on-site repairs with professionalism and safety in mind. #J-18808-Ljbffr

Facilities Helpdesk Coordinator / Operations Coordinator Location: Caterham, Surrey Salary: £35,000 £40,000 DOE Contract: Full Time, Permanent Join Foxleys Foxleys is a well-established commercial building maintenance and refurbishment contractor delivering planned and reactive fabric maintenance services across London and the South East. Working with some of the UK's largest managing agents, including Savills, CBRE, Cushman & Wakefield, JLL and Knight Frank, we pride ourselves on delivering exceptional customer service, rapid response times and high-quality workmanship. Due to continued growth, we are looking for an organised and proactive Facilities Helpdesk Coordinator to become a key member of our operations team. This is an exciting opportunity for someone who thrives in a fast-paced environment, enjoys problem solving and takes pride in delivering excellent customer service. You’ll be at the heart of our business, coordinating reactive maintenance works from the moment they're reported through to completion. You’ll communicate with clients, engineers and suppliers throughout the day, ensuring every job is managed efficiently while delivering the highest levels of customer service. No two days are ever the same. • Managing the helpdesk phone line and shared email inbox, • Logging maintenance requests onto The BigChange system, • Raising and allocating jobs to engineers, • Scheduling reactive and planned maintenance works, • Liaising with engineers throughout the day regarding attendance, progress and completion, • Organising engineer diaries to maximise efficiency, • Ordering and coordinating materials with suppliers, • Updating clients with progress reports and job updates, • Building strong relationships with commercial managing agents including Savills, CBRE, Cushman & Wakefield and other blue-chip clients, • Monitoring outstanding jobs to ensure service level agreements (SLAs) are achieved, • Uploading photographs, reports and completion information, • Raising purchase orders where required, • Ensuring all job information is accurate and up to date, • Assisting with quotations and follow-up works, • Supporting the Operations Manager with day-to-day scheduling and workload planning We’re looking for someone who is highly organised, calm under pressure and enjoys working in a busy office environment. You’ll be confident communicating with customers, engineers and suppliers and able to juggle multiple priorities throughout the day. • Previous experience within a facilities management, maintenance or construction environment, • Excellent telephone manner, • Strong customer service skills, • Excellent organisational skills, • Ability to prioritise a busy workload, • Good IT skills, • High attention to detail, • Excellent communication skills, • Ability to work as part of a team, • Experience using The BigChange system, • Experience using CAFM or job management software, • Previous Helpdesk or Scheduling experience, • Knowledge of commercial building maintenance, • Experience working with managing agents, • Competitive salary (£35,000 £40,000 DOE), • Company pension, • 28 days annual leave including bank holidays, • Ongoing training and development, • Career progression opportunities, • Friendly and supportive team, • Modern office environment, • Free on-site parking, • Company events, • Long-term job security with an established business operating since 1993 At Foxleys, we believe our people are our greatest asset. We invest in our team, encourage progression from within and provide a supportive working environment where everyone contributes to the success of the business. You’ll become part of a close-knit operations team responsible for delivering maintenance services to some of the UK's most prestigious commercial properties, with every day bringing new challenges and opportunities. #J-18808-Ljbffr

Buxted Construction was formed in 1994 and is one of the larger contractors carrying out groundworks, infrastructure and civil engineering works, primarily for the major residential housing developers. Motor Vehicle Technician/Engineer. If you feel you are a suitable candidate and would like to work

Reference Number: BBBH25533h Keywords: Noise Control Engineer, Acoustic Engineer, Noise & Vibration, Technical Support Engineer, Environmental Acoustics, IOA, Sound Engineering, Noise Surveys, Acoustic Testing, Technical Sales Support, Vibration Control, Manufacturing, North London Jobs, Hertfordshi

We sort construction site engineer jobs with better pay, shorter commutes and sooner starts in mind.

We sort construction welder engineer jobs with better pay, shorter commutes and sooner starts in mind.

This role offers the opportunity to play a key part in a talented engineering team, often acting as project leader on a range of challenging projects from concept through to construction. A well-established and highly respected multidisciplinary engineering consultancy is seeking a Senior Structural

Ferrovial Construction is recruiting a System Safety Design Engineer to join the HS2 Track infrastructure project at the initial design phase, collaborating across disciplines to embed safety across the system. You will work with designers, clients and engineers to identify hazards, define requireme

SJ Group is seeking a Senior Engineer to join the Construction Engineering Team in London. The ideal candidate should have a degree in Civil Engineering, at least 5 years of experience, and be working towards chartership.

A leading construction company in the United Kingdom seeks a Pre-Construction Engineer to support design management for various projects.

Carrington West is seeking an experienced Senior Site Engineer for a major wastewater infrastructure project in Hertfordshire. The role focuses on hands-on setting out, surveying and delivering civil works on site while mentoring junior engineers and supporting the delivery team. The candidate shoul

Randstad CPE is seeking an innovative Temporary Works Design Engineer to deliver high-quality, buildable temporary works designs for Major Projects. You will act as a technical expert, managing workload for CAD Engineers and delivering designs within time and budget constraints. The role requires a

Strata Construction Consulting UK Ltd in Central London is seeking a Senior Civil Engineer to lead Civil and Structural projects. You will manage delivery, coordinate with clients and design teams, and mentor junior engineers within a multidisciplinary office. Applicants should have UK civil enginee

Ferrovial Construction seeks a Chartered Civil/Structural Engineer to lead structural design for water treatment and related facilities. You will coordinate multidisciplinary teams, ensure compliance with UK standards, and drive value engineering and digital design solutions.

Job purpose: The Contracts Engineer is responsible for the delivery of all contracts signed on behalf of the business. They will monitor the progress of projects from beginning to end – from design & planning through to construction and handover using RAMS. Reporting to the Site Agent / Project Ma

Qualified F-Gas Engineer with experience in chillers, air conditioning, electrical installations, and repairs. Mobile Chiller/Air Conditioner Service Engineer - Kent. We are seeking experienced and qualified Mobile Chiller/Air Conditioner Service Engineer's to join our team and maintain and repair c

Randstad CPE is recruiting an experienced Site Engineer for a major groundworks project in East London.

Future Engineering Recruitment Ltd in London is recruiting a Project Engineer to work on complex and technically challenging construction projects across London. You will join an established construction business and develop your technical skills, take on greater responsibility and build a long-term

Skanska Costain STRABAG Joint Venture is recruiting 2 Project Engineers for the Completions & Transitions team on the HS2 London Tunnels contract. The role provides technical lead support for post-construction assurance activities on shaft and headhouse packages. A civil engineering background and s

Due to continued growth and a strong pipeline of commercial fit-out work across London, they are looking to appoint an Electrical Pre-Construction Engineer to join their expanding Pre-Construction team. This is an excellent opportunity for an Electrical Project Engineer or Building Services Engineer

Strata Construction Consulting UK Ltd is seeking an Associate Structural Engineer in its Southwark office.

The Construction / Fabrication Engineer impacts a range of customer, operational, project, Subcontractor or service activities with the Tech Services team and other related teams and ensures that they are working within the appropriate guidelines and policies. The Construction / Fabrication Engineer

Ensure a robust Engineering Service Enquiry is drafted, reviewed and approved, detailing required Pre‑Construction design deliverables in line with project requirements and the Pre‑Construction Programme. Pre-Construction Senior Engineer – Environment North and East. An opportunity has arisen

Randstad is recruiting for an experienced Section Engineer with strong Rail or Civils expertise to support a rail upgrade project in East London. Managing engineering activities, subcontractors, and/or self-delivery teams.

Proven experience in a supervisory or engineering management role within MEP engineering, infrastructure, or utility construction projects. Supervise subcontractors, Site Engineers, Assistant Engineers and the workforce, ensuring all parties understand and adhere to approved RAMS and construction me

Electrical Engineer (Night Shift). We are looking for a dedicated Electrical Engineer to join our nighttime maintenance team.

Strata Construction Consulting UK Ltd in London is seeking a Senior Civil Engineer to lead building drainage and infrastructure design on a long-term contract, working closely with architects and structural engineers in a flexible hybrid setting.

SITE ENGINEER – HEAVY CIVIL & MARINE ENGINEERING. Strong technical and site-based engineering capability.

Kier Group is seeking a Principal Construction Engineer to lead delivery for the ILIOS STEP Programme, based at West Burton / Culham with programme travel. You will drive construction methodology, sequencing and offsite principles, coordinating across multi‑discipline teams and external contractor

We are recruiting for a Technical Assurance Requirements Engineer to join the HS2 Track infrastructure project at the initial design phase. The Technical Assurance Requirements Engineer will apply the processes and procedures identified in the FBRS Requirements and Assurance Management Plan (RAMP) t

Bechtel is seeking a Tunnelling/Underground Construction Engineer in London to support planning, development, and execution of tunnel works across Heavy Civil projects. Based in London, you will collaborate with engineering, procurement, project controls, quality, environmental, and construction tea

Richard Crookes Constructions (RCC) is seeking an experienced Senior Project Engineer to contribute to major, high-profile projects across health, social infrastructure, and education sectors.

Randstad CPE is seeking a Mobile Engineer to cover sites across North London. This position suits engineers who value local travel and work-life balance.

A leading construction consultancy in London is seeking a Senior Associate to specialize in the Delay division. Candidates should have over 4 years of engineering experience and exposure to delay analysis. Exceptional communication and analytical skills are essential, along with a relevant degree in

You will provide engineering expertise, ensure quality control, and manage construction logistics. Ideal candidates hold a degree in Civil Engineering and possess experience in construction methods and safety regulations. A leading construction firm in Greater London is seeking a skilled Field Engin