Installation engineer jobs in United Kingdom

Service Engineer Sewage & Wastewater PumpsJob Title: Service Engineer Sewage & Wastewater PumpsJob Reference Number: 782690-3487-26138Industry Sector: Engineer, Installation Engineer, Service Engineer, Technician, Water Pump Systems, Clean Water Pumps, Pumps, Water Industry, Water Pump Stations, Submersible Pump Stations, Water Hygiene, Precast Concrete Pump Stations, Above Ground Pumps, Sub-Contractor, Main Contractors, HousebuildersLocation: London & Home CountiesRemuneration: £35,000 - £42,000 + £2,000 bonusBenefits: Company van (business use only), NEST pension, 21 days annual leaveThe role of the Service Engineer Sewage & Wastewater Pumps will involve:Service Engineer position dealing with the service and installation for a range of water pump solutionsField based role working on sites Nationwide, however primarily in and around London & Home CountiesHolding accountability for all aspects of your van stock, safety equipment and trainingCompleting reports for completed worksWorking competently whilst unsupervised and ensuring the job is completed before leaving sitePossessing the ability to deliver excellent customer service when on siteThe ideal applicant will be a Service Engineer Sewage & Wastewater Pumps with:Must have experience as an Engineer dealing with the servicing and installation of pumps or related HVAC control systemsIdeally will have electrical qualifications 18 th Edition or equivalentExcellent communication and customer service skillsA highly motivated individual, who is flexible and has an excellent work ethicMust hold full UK driving licenceMitchell Maguire is a specialist Construction Recruitment Consultancy, dealing exclusively with Construction Jobs, Construction Vacancies and Specification Positions within: Engineer, Installation Engineer, Service Engineer, Technician, Water Pump Systems, Clean Water Pumps, Pumps, Water Industry, Water Pump Stations, Submersible Pump Stations, Water Hygiene, Precast Concrete Pump Stations, Above Ground Pumps, Sub-Contractor, Main Contractors, HousebuildersTPBN1_UKTJ

Role OverviewWould you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity? We are currently seeking an experienced escalator call out and repair engineer to join our Transport for London team, covering our London Underground escalator portfolio. Your priority is to ensure the safety of passengers and technical stakeholders by safely maintaining a portfolio of escalator units.On a typical day you will:Carry out breakdown and repair work on all escalators within the portfolio to achieve continual operationWork within London Underground network, managing the portfolio of escalator's within itRespond proactively and quickly to fix any breakdowns, aiming to achieve first time fixLiaise directly with the customer while on site to build a good working relationshipWhat you will need to be successfulYou will be qualified to at least NVQ Level 3 in Escalator Engineering with significant experience in service and maintenance of escalatorsYou must be an experienced escalator engineer with in-depth knowledge of a variety of different brands of equipmentHold a valid UK drivers licenseFlexibility is important and overtime maybe requiredYou have good skills in mechanical and electrical engineeringYou are a committed professional, with safety as your priorityYou are comfortable communicating to othersYou are curious, adaptable, and you know how to work alone or in a teamYou are comfortable using electronic and digital tools.What's In it For Me / BenefitsYou will be offered fantastic salary and benefits.4 on 4 off 12 hour shifts.On top of a competitive basic salary, you will have the opportunity to supplement your earnings with OvertimeBenefits which include pension, Life Assurance, Paid Maternity, Paternity and access to the Otis Rewards SchemeEmployee Scholarship Scheme - Otis will support you through your studies if you wish to gain further qualifications including Bachelors and Masters DegreesWe will train you intensively in the areas of technology, processes & soft skills and you can exchange ideas with experienced colleagues at any time.You will receive modern and high-quality work clothes, your own tools with an iPhoneThe health and safety of our employees is our top priority. We promote this through regular training on the subject of occupational health and safety as well as through an employee support program.Apply today to join us and build what's next!If you live in a city, chances are we will give you a lift or play a role in keeping you moving every day.Otis is the world's leading elevator and escalator manufacturing, installation, and service company. We move 2.4 billion people every day and maintain approximately 2.4 million customer units worldwide, the industry's largest Service portfolio.You may recognize our products in some of the world's most famous landmarks including the Eiffel Tower, Empire State Building, Burj Khalifa and the Petronas Twin Towers! We are 72,000 people strong, including engineers, digital technology experts, sales, and functional specialists, as well as factory and field technicians, all committed to meeting the diverse needs of our customers and passengers in more than 200 countries and territories worldwide. We are proud to be a diverse, global team with a proven legacy of innovation that continues to be the bedrock of a fast-moving, high-performance company.When you join Otis, you become part of an innovative global industry leader with a resilient business model. You'll belong to a diverse, trusted, and caring community where your contributions, and the skills and capabilities you'll gain working alongside the best and brightest, keep us connected and on the cutting edge.We provide opportunities, training, and resources, that build leadership and capabilities in Sales, Field, Engineering and Major Projects and our Employee Scholar Program is a notable point of pride, through which Otis sponsors colleagues to pursue degrees or certification programs.Today, our focus more than ever is on people. As a global, people-powered company, we put people - passengers, customers, and colleagues - at the center of everything we do. We are guided by our values that we call our Three Absolutes - prioritizing Safety, Ethics, Quality in all that we do. If you would like to learn more about environmental, social and governance (ESG) at Otis click here .TPBN1_UKTJ

\n Display Technician \n Location: Remote working across North / West London patch Salary: £32,000 to £38,000 basic DOE + c.25% uplift through overtime/travel pay (potential package £45,000+) Vehicle: Fully expensed Transit Custom or VW Transporter with personal use \n \n \n The Role \n An exciting opportunity has arisen for a hands-on Display Technician to join a dynamic team delivering cutting-edge visual technology across a wide range of environments. This role is ideal for someone who enjoys variety, problem-solving, and working with innovative display systems - from compact screens to large-scale LED installations. \n The Role \n This is a hands-on, field-based role offering exceptional variety. Technicians work across a wide range of environments from retail and corporate spaces to roadside installations and major sporting venues. \n Responsibilities include: \n * Installation of display hardware, electrical and data systems, and supporting structures \n * Commissioning and preventative maintenance \n * Modular-level field service and event support \n What You'll Need \n • Full UK driving licence \n * Comfortable working outdoors and at height \n * Strong diagnostic skills in IT, electrical, or electronics \n * Experience in field-based service, installation, or commissioning \n * Willingness to work occasional nights, weekends, and bank holidays \n * Electrical, Electronics, IT or AV background (or relevant transferable experience) \n * ONC/NVQ Level 3 or equivalent \n * IPAF (1b, 3a, 3b), PASMA, CSCS card, and working at height training \n What's on Offer \n • Base salary: £32,000-£38,000 (plus circa 20-25% uplift through overtime and door-to-door pay) \n * Vehicle: Fully expensed Ford Transit Custom or VW Transporter (including personal use) \n * Tools & Tech: Company laptop, mobile phone, PPE, and tools provided \n * Expenses: "Claim what you pay" basis \n * Pension: Stakeholder scheme with company contribution or payment to private pension \n * Flexibility: Working hours tailored to suit both the role and the individual \n * Travel Pay: Technicians are paid "door to door" - from leaving home to returning \n About the Company \n My client is a leading UK service provider in the display technology sector, this organisation supports manufacturers, system integrators, and end users with installation and lifetime maintenance of advanced display systems. Their expertise spans TFT and LED technologies, including Micro LED, Chip On Board, and SMD displays for both indoor and outdoor environments. \n They are the exclusive UK authorised service partner for global leaders such as Samsung and Daktronics, and work closely with major Digital Out Of Home brands including Ocean Outdoor, JC Decaux, Alight Media, and Global. Their installations are found in high-profile locations such as Harrods, Piccadilly Lights, Wembley Stadium, and Barclays HQ. \n What's Next? \n If you're a detail orientated field engineer with strong diagnostic skills in electrical or electronic systems and want to join a rapidly growing business, please click the link to apply! \n Robert Walters Operations Limited is an employment business and employment agency and welcomes applications from all candidates

Pump Engineer Location: London\n Salary: £45,000 - £52,000 per year\n Hours: Monday to Friday, 7:00am - 5:00pm Some on call\n \n \n Pump Engineer Drainage & Wastewater Services We are looking for an experienced Pump Engineer to join our growing drainage and wastewater team across London. This is an excellent opportunity for a skilled engineer with experience in the installation, maintenance, servicing, and r...\n \n \n \n \n \n ZIPC1_UKTJ

At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity.The RoleWe are looking for a Lift Field Technician to join our Service Team covering East London and surrounding areas. You will be an experienced Service Engineer with an NVQ Level 4 in Lift Engineering and LEIA training.Key ResponsibilitiesProviding technical support using problem solving techniques to provide solutions and recommendationsTesting lift modernisationsUsing your expertise to solve technical problems associated with lift/elevator call outs and repairsSupporting a team of Service Engineers using your experience of working with Orona and other lift productsObtaining and enhancing knowledge on a wide range of lift types and equipmentManaging your time covering a geographical region working on your own initiativeWhat Were Looking ForProven experience within the lift industryNVQ level 4Lift Types Knowledge - Reasonable understanding of all major competiors equipment.Problem Solving able to identify problems, break them down into smaller elements, pin point possible solutions, prioritise these different elements and construct an action plan for tackling the problem.Full clean UK Driving LicenceRight to Work in the UK (mandatory)If you are ambitious, safety-driven, and ready to take the next step in your lift engineering career, we would love to hear from you.Why Join ORONA?We offer more than just a job we offer long-term career development within a stable and growing company.What We Offer:Attractive Salary : Competitive pay that reflects your skills and experienceGenerous Holiday Allowance : Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidaysSecure Future : Benefit from a pension scheme with increasing company contributions as you grow with usPeace of Mind : Life Inssurance to support you and your loved onesHealth & Wellbeing : Medical Cash Back Plan to help with health costs, plus access to 24/7 GP servicesFamily-Friendly Benefits : Enhanced leave for family-related events and emergenciesSupport When You Need It : Employee Assistance Programme offering confidential support for personal or work-related challengesEye Care : Eyecare vouchers to help keep your vision sharpRecognition for Longevity : Long Service Awards to celebrate your milestones with usReferral Rewards : Earn a Recruitment Referral Fee by helping us find top talentContinuous Growth : Ongoing Training & Development opportunities to support your career journeyJoin ORONA and be part of a company moving the world safely and efficiently every day.TPBN1_UKTJ

Fire Installation & Commissioning Engineer \n Package £38,000 - £42,000 per annum + Overtime and Expenses \n Location Oxfordshire, Hertfordshire, Buckinghamshire, London \n We are seeking an experienced Fire Installation & Commissioning Engineer to install, test, commission and hand over fire alarm, detection, emergency lighting and associated fire-protection systems across commercial, industrial and resid... \n \n ZIPC1_UKTJ

Gate, Barrier and Automatic Door Engineer | Company Vehicle + Paid Travel Location of works: South London Salary Bracket: Up to £48,000 per year (DOE) Industry: Fire & Security Recruitment Partner: 4way Recruitment is the UK’s specialist recruitment agency exclusively focused on the Fire & Security sector. About Our Customer 4way Recruitment has partnered directly, with an established provider to secure a permanent Gate, Barrier and Automatic Door Engineer for their team. The company delivers specialist engineering services across a broad range of properties and contracts throughout the UK. With continued demand for its services, they are looking to add an experienced engineer who can provide reliable technical support across a range of automated access systems. Salary and Benefits - Gate, Barrier and Automatic Door Engineer Salary up to £48,000 depending on experience Company vehicle provided Paid travel after the first 30 minutes each way 23 days holiday plus bank holidays Overtime available On-call rota Permanent, full-time position Key Responsibilities – Gate, Barrier and Automatic Door Engineer Attend customer sites to investigate and resolve equipment faults Carry out routine servicing and preventative maintenance Complete repair and installation works on automated access equipment Work on a range of gates, barriers and automatic door systems Identify mechanical, electrical and control-related issues Carry out equipment checks, inspections and site assessments Complete scheduled maintenance programmes Ensure equipment is operating safely and efficiently Keep service records and job documentation up to date Liaise professionally with customers and site representatives Follow relevant company, quality and health & safety procedures Provide out-of-hours support as part of the company's callout arrangements when required Skills and experience – Gate, Barrier and Automatic Door Engineer: Previous experience within automatic doors, gates, barriers or related automation Strong practical knowledge of automated access equipment Multi-skilled experience covering more than one discipline would be advantageous ADSA or ADIA accreditation would be desirable Ideally 3+ years' experience within the industry Confident mechanical and electrical fault-finding skills Good understanding of automation, controls and associated equipment Full UK Driving Licence Strong communication and customer service skills Comfortable working independently and managing a daily workload Reliable, organised and committed to delivering quality workmanship Why Join this Company? Market Position: Join an established national organisation with a substantial UK operation and a diverse customer base across commercial and residential environments. Work Culture: A professional engineering environment offering stability, varied work and the backing of a larger organisation. Engineers are trusted to manage their own workloads while having access to the wider support and resources of the business. Apply through 4way Recruitment Today! If you're an experienced Gate, Barrier and Automatic Door Engineer based in South London, this is your chance to join a respected company offering strong earning potential, a company vehicle, paid travel after 30 minutes each way and varied engineering work. Keywords to support your application: Gate Engineer, Barrier Engineer, Automatic Door Engineer, Gate Automation Engineer, Door Automation Engineer, Automation Engineer, Access Control Engineer, Automated Gates, Automatic Doors, Traffic Barriers, Gate Systems, Door Systems, ADSA, ADIA, Preventative Maintenance, PPM, Servicing, Repairs, Fault Finding, Installation, Automation, Engineering Jobs, Security Engineering IND-LON

Date Posted:\n \n2026-08-11\n Country: \n \nUnited Kingdom\n Location: \n \nOtis London, 96 Great Suffolk Street, Southwark, London, SE1 0BE\n \nJob Title Installation Engineer\n \n \nWe are seeking an experienced Lift Installation Engineer to join our team delivering lift installation projects across the London Underground network and similar transport infrastructure environments. The successful candidate will be responsible for ...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

The Fire Maintenance Engineer will deliver work across London & Home Counties\n \n Company overview:\n \n \nSureserve Compliance Fire Ltd., is a specialist in the design, installation, and maintenance of fire safety and electrical systems, providing fire and electrical compliance and testing services. This covers a comprehensive range of physical infrastructure and safety considerations required for a building ...\n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Are you an experienced Window and Door Engineer who takes pride in their work? Do you have a passion for exceptional customer service? Are you someone who wants to get the job done right, first time every time? Do you have previous experience of uPVC installation and maintenance?Our Window and Door Engineers are essential to efficiently & effectively assist our customers with any product and installation related maintenance for Anglian installed products covered by our 10-year warranty. We will provide all the tools and equipment that you will need to carry out this role including a van, PDA, mobile phone and tools.Your duties will include:Visiting customer homes, identifying the fault and taking the appropriate action to rectify in line with our warranty and our quality standardsTo demonstrate & explain correct product care to customersBe customer focused and provide a high level of service to every customerCompleting service calls as scheduled and in a timely manner using our, “Right First Time” approach, helping to reduce any cancelled appointmentsAccurate and timely completion of paperwork and regular updating of the supplied PDA deviceYou will need:Experience of uPVC installation and maintenance (or relevant qualification)Excellent customer service skills and experience in a customer facing environmentBe able to work on your own initiative in a standalone field based roleA willingness to travel as required and show flexibility within the working weekGood time management skillsGood communication skillsA full driving licenseWhat We OfferCompetitive basic salary and Performance related bonusVan (for business use only)31 days holiday, increasing to 33 days after 2 years of service plus have your birthday offPaid time off annually to volunteerComprehensive health and well-being benefits including cycle to work scheme, 24hr remote access to a doctor, heavily discounted gym memberships and free access to mental health first aidersHeavily discounted group discount scheme on all productsGroup Perks and freebies on days out, cinema, theatre, eating in and out, mobiles phones, a new car, food shopping and most major high street retailersOpportunity to work with a forward-thinking and supportive team.Career development and continuous learning opportunitiesImportant Information About Right to WorkWe're delighted that you're considering joining our team. For this role, applications will only be accepted from individuals who already have the right to work in the UK, or who can independently secure this right. This position does not meet the Home Office requirements for employer visa sponsorship.If you're unsure about your eligibility, you can find helpful information on the UK government website. Thank you for your understandingOur Company is committed to monitoring & aligning its Policies with up-to-date Government guidance on reducing the spread of respiratory infections in the workplace. Through the Companys value of Succeed Together we are committed to Equality, Diversity and Inclusion. We recruit the best person for the job regardless of any protected characteristics as defined by the Equality Act 2010 creating an inclusive working environment and culture for our employees.TPBN1_UKTJ

Commissioning EngineerNortholt / London & Southeast Sites£45,000£50,000 DOE + Company Van + Fuel Card + HealthcareAre you an experienced Life Safety/Fire Alarm Commissioning Engineer looking to join a well-established and growing business working on high-profile residential and commercial projects across London and the Southeast?We are a long-standing family-run business specialising in Security, Fire, Door Entry, Access Control and Data System solutions for high-rise developments, new builds and occupied residential sites. Due to continued growth, we are looking for a proactive and technically skilled engineer to join our commissioning team.This is a field-based role offering excellent long-term stability, varied projects, a supportive team environment, and the opportunity to work with leading security technologies and manufacturers.What is on OfferSalary up to £50,000 DOECompany van & fuel cardTools, uniform & equipment providedComprehensive private healthcare20 days holiday + bank holidays + birthday offAdditional holiday entitlement with service (up to 25 days)Monthly company lunchesQuarterly company eventsSupportive and collaborative working environmentLong-term career progression opportunitiesWhat you will be doing as a Life Safety/Fire Alarm Commissioning Engineer:Commission and configure Fire Alarm, Evacuation Alert and emergency voice communication and toilet alarm systems and associated solutions.Perform system testing, fault finding, and troubleshooting to ensure optimal performance.Interpret technical drawings, schematics, and specifications.Ensure all systems are installed and commissioned in line with industry standards and client requirements.Work closely with installation teams, project managers, and clients during project delivery.Provide on-site and remote technical support where required.Deliver system training and handover documentation to clients.Maintain accurate records of commissioning activities and system configurations.Ensure compliance with health & safety regulations at all timesAdhoc duties as requiredSystems & TechnologiesYou will ideally have experience working with some of the following:Fire AlarmEvacuation AlertEmergency Voice CommunicationToilet Alarm systemsIntegrated Life Safety SystemsManufacturers may include:AdvancedApolloC-TecMorleyWhat we are looking for to be our Commissioning Engineer: Proven experience as a Commissioning Engineer within the Life Safety IndustryStrong experience with leading fire alarm systemsAbility to diagnose and resolve technical faults efficientlyStrong communication and customer-facing skillsFull UK driving licenceExperience with fire alarms, life safety is essential.Working HoursMonday to Friday8:00am 5:00pmField-based across London and the Southeast with occasional visits to the Northolt office.Apply NowIf you are a motivated Commissioning Engineer looking for your next opportunity within a growing and respected business, we would love to hear from you.Apply today to find out more.TPBN1_UKTJ

The Sureserve Group of businesses provides market-leading compliance and energy services across the UK, with 4000 employees working from over 20 offices.\n \n \nSureserve Compliance South, delivers heating services within the social housing sector across London & the South East. We support our clients across domestic gas, commercial gas, renewables, and electrical services. We are London's largest, most s...\n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity.The Role - Lift Repairs EstimatorResponsible for identifying repair work opportunities; compiling quotations for repair works and progressing with customers to gain chargeable orders. Liaises with service & account managers in regional offices to maximise chargeable repair order opportunitiesReviews customer orders gained and accurately prepares repairs package for handover to relevant Repairs Supervisor for completionKey ResponsibilitiesReview maintenance reports and engineer notes to identify repair opportunities.Create accurate, timely quotations for repairs and insurance requests.Follow up with clients to ensure quotes are received and understood.Convert quotes into orders by building trust and offering solutions.Support admin tasks in the regional service office, including handling calls.What Were Looking ForPrevious experience in the lift industry is essential, ideally in a sale or estimating capacity.Strong interpersonal and communication skills, with the ability to build effective relationships with clients.Excellent organizational skills and the ability to manage multiple tasks in a fast-paced environment.Proficiency in IT tools and systems related to quoting and customer management.If you are ambitious, safety-driven, and ready to take the next step in your lift engineering career, we would love to hear from you.Why Join ORONA?We offer more than just a job we offer long-term career development within a stable and growing company.What We Offer:Attractive Salary : Competitive pay that reflects your skills and experienceGenerous Holiday Allowance : Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidaysSecure Future : Benefit from a pension scheme with increasing company contributions as you grow with usPeace of Mind : Life Insurance to support you and your loved onesHealth & Wellbeing : Medical Cash Back Plan to help with health costs, plus access to 24/7 GP servicesFamily-Friendly Benefits : Enhanced leave for family-related events and emergenciesSupport When You Need It : Employee Assistance Programme offering confidential support for personal or work-related challengesEye Care : Eyecare vouchers to help keep your vision sharpRecognition for Longevity : Long Service Awards to celebrate your milestones with usReferral Rewards : Earn a Recruitment Referral Fee by helping us find top talentContinuous Growth : Ongoing Training & Development opportunities to support your career journeyJoin ORONA and be part of a company moving the world safely and efficiently every day.TPBN1_UKTJ

At ORONA, we are at the forefront of innovation, designing and installing lifts, escalators, and moving walkways worldwide. We're looking for a dynamic and experienced Installation Engineer to join our growing team, playing a key role in ensuring the flawless installation of our industry-leading lift systems. If youre passionate about quality, safety, and leadership, this is your opportunity to ta... \n \n ZIPC1_UKTJ

Salary and Benefits for an Air Conditioning & Refrigeration Installation Engineer \n\n • 38-50k basic salary depending on experience and certificates\n, • Door to door travel pay\n, • Van, phone, uniform, £300 van float\n, • Parking tickets paid so you dont have to keep moving your van in London\n, • Call out rota available if you want to go on it\n, • 20 days holiday + 8 bank holidays\n, • Private healthcare after 1 year\n\n A fantastic chance ... \n \n ZIPC1_UKTJ

Job Overview \n The Installation Engineer role covers Greater London and focuses entirely on automated gates, barriers and perimeter access systems. As an Installation Engineer, you will work across commercial, industrial and residential sites installing, servicing and fault-finding on Sliding Electric Gates, Speed Gates, Commercial Security Gates, Rising Bollards, Traffic Barriers, Cantilever Sliding... \n \n ZIPC1_UKTJ

Fire and Security Engineer \n An exciting opportunity to join our team at Flash Security, for a skilled Fire and Security Engineer to carry out installation, servicing and maintenance of fire alarms, intruder alarms, CCTV and access control systems across London and surrounding areas. \n If youve also worked in the following roles, wed also like to hear from you: Fire Alarm Engineer, Security Installation... \n \n ZIPC1_UKTJ

Role Overview\n \nWould you like to join a truly international, talent driven company that values Safety, Ethics, Quality, Innovation and Employee Opportunity?\n \n \nOtis is growing and is looking for an installation Engineer to join the team. Your priority is to ensure the safety of passengers and technical stakeholders by safely installing a portfolio of elevator units.\n \n On a typical day you will:\n \nInstall new ...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Multi-Skilled Maintenance Engineer – Days \n Park Royal, London NW10 | £52,000–£60,000 DOE | Monday–Friday, 8:00am–5:00pm \n Imagefarm Ltd is an established, privately owned frozen food manufacturer based in Park Royal, London. Established in 1990, we operate from our own manufacturing facility and are looking for an experienced Multi-Skilled Maintenance Engineer to become our principal in-house engineering resource. \n This is a genuinely hands-on role maintaining a diverse range of electrically and mechanically driven food-processing, production and packaging machinery. \n The successful candidate will take ownership of day-to-day maintenance, reactive breakdowns, Planned Preventive Maintenance (PPM) and the ongoing improvement of machine reliability and engineering standards. \n Key Responsibilities \n • Diagnose and repair electrical and mechanical machinery faults. \n • Respond promptly to production breakdowns and minimise downtime. \n • Carry out and document Planned Preventive Maintenance. \n • Repair and replace wire belt conveyors, including associated drive and tracking components. \n • Maintain motors, gearboxes, bearings, conveyors, pumps, sensors, switches, contactors, relays, drives and related equipment. \n • Diagnose and repair pneumatic systems and undertake basic hydraulic maintenance. \n • Safely fault-find electrical control panels and machine electrical systems within the engineer's competence. \n • Read and interpret electrical drawings, machine manuals and manufacturers' technical documentation. \n • Inspect machinery and identify developing defects before failure. \n • Maintain engineering records and individual machine maintenance histories. \n • Help develop and control engineering spare-parts stocks. \n • Source replacement components and spare parts where required. \n • Maintain appropriate workshop, tooling and housekeeping standards. \n • Identify opportunities to improve machine reliability, safety and performance. \n • Liaise with machinery manufacturers and external specialist contractors. \n • Assist with machinery installation, modification and commissioning where required. \n • Identify engineering Health & Safety concerns including guarding, emergency stops, electrical integrity and safe isolation. \n • Maintain engineering and hygiene standards appropriate to a food-manufacturing environment. \n Specialist refrigeration plant is maintained under a separate specialist service contract. The Maintenance Engineer will not normally be expected to service or repair this equipment but will act as Imagefarm's principal engineering contact, supervising and liaising with the refrigeration contractor and other specialist engineering contractors attending site. \n Essential Skills and Experience \n Candidates should have: \n • Strong industrial electrical fault-finding skills. \n • Good practical mechanical maintenance ability. \n • Experience maintaining industrial production machinery. \n • Experience of both reactive breakdown maintenance and PPM. \n • Experience with motors, contactors, relays, sensors, switches and variable-speed drives/inverters. \n • Experience maintaining and repairing conveyor systems. \n • Good understanding of pneumatic systems. \n • Ability to read electrical drawings and technical manuals. \n • Good understanding of electrical and mechanical isolation and safe working procedures. \n • Strong practical fault-finding and problem-solving ability. \n • Ability to work independently and take ownership of engineering problems. \n • Good organisational and record-keeping skills. \n • Basic computer literacy, including accessing electronic manuals and technical documents, internet-based spare-parts sourcing and routine email communication using Microsoft Outlook. \n • Sufficient written and spoken English to understand technical documentation, communicate clearly with production staff and suppliers, and maintain accurate engineering records. \n Desirable Experience \n Experience in the following would be advantageous but is not essential: \n • Food/FMCG manufacturing. \n • Food-processing and packaging machinery. \n • PLC fault diagnosis/interrogation. \n • Hydraulic systems. \n • Stainless-steel welding/fabrication. \n • PPM/CMMS systems. \n • Machine installations and commissioning. \n The Person \n We are looking for a practical engineer rather than a desk-based engineering manager. \n The successful candidate should be comfortable working directly on machinery, investigating breakdowns and taking responsibility for seeing problems through to resolution. \n The position may particularly suit an experienced engineer who has spent many years working shifts within manufacturing and now wishes to move into a stable Monday-to-Friday, 8:00am–5:00pm daytime position while continuing to use their technical knowledge and experience. \n Practical ability, reliability, sound engineering judgement and a methodical approach to fault finding are particularly important to us. \n What We Offer \n • £52,000–£60,000 salary depending upon experience and capability. \n • Permanent, full-time position. \n • Monday–Friday, 8:00am–5:00pm. \n • No routine rotating day/night shift pattern. \n • Single manufacturing site. \n • Private on-site parking available. \n • Considerable autonomy and responsibility. \n • Opportunity to take ownership of and improve the site's engineering maintenance systems. \n • Long-term position within an established independent manufacturing business. \n How to Apply \n Please apply through Reed with your current CV and answer the screening questions included with this vacancy. Applications submitted without the requested information may not be considered.

About the RoleA well-established Fire Protection and Compliance company is looking to recruit an experienced Electrical Testing & Maintenance Engineer to support a growing portfolio of privately owned residential apartment blocks throughout London and the surrounding Home Counties.This role will involve carrying out electrical testing, inspection, fault finding, repairs, and planned maintenance works across both communal areas and occupied residential properties. The successful candidate will enjoy a varied workload, working closely with property managers, residents, and internal compliance teams to ensure electrical safety standards are maintained.Whilst not essential, candidates with experience in fire alarm installation, servicing, or maintenance will be highly regarded due to the nature of the client portfolio and wider fire protection services offered by the business.Key ResponsibilitiesCarry out Electrical Installation Condition Reports (EICRs).Perform planned and reactive electrical maintenance works.Undertake inspection and testing of electrical installations.Diagnose faults and complete remedial works as required.Complete certification and reports accurately and efficiently.Work within occupied residential environments and communal areas.Ensure all works comply with current regulations and company procedures.Deliver excellent customer service when interacting with residents and managing agents.Essential RequirementsNVQ Level 3 in Electrical Installations (or equivalent).City & Guilds 2391 Inspection & Testing (or equivalent).18th Edition Wiring Regulations.Previous experience carrying out electrical testing and inspection works.Full UK Driving Licence.Strong fault-finding and maintenance skills.Excellent communication and customer-facing abilities.Desirable SkillsFire alarm installation experience.Fire alarm servicing and maintenance experience.Knowledge of residential block management environments.Experience working within compliance-led sectors.Understanding of emergency lighting systems.Package? £40,000 - £45,000 Basic Salary? Company Vehicle & Fuel Card? Overtime Opportunities? Productivity Bonus Scheme? Ongoing Training & Development? Long-Term Career Progression? Stable, Growing BusinessApply NowThis is an excellent opportunity for a qualified Electrical Testing & Maintenance Engineer seeking a long-term role with a growing fire protection and compliance company operating across London and the Home Counties.Apply today with your CV for a confidential discussion.TPBN1_UKTJ

We are currently recruiting on behalf of an established and growing fire & Security business for an experienced Small Works Engineer to join their team. \n The role will predominantly involve small electrical works, emergency lighting installations and replacements, and the installation/replacement of fused spurs, with the opportunity to work on a variety of commercial projects. You will be expected t... \n \n ZIPC1_UKTJ

Deployment Project Engineer, PLC, HMI, SCADA, London, COR7656 \n A Deployment Project Engineer opportunity has opened up with a fast-growing clean energy business. This is a hands-on, site-facing role where you will own the full journey of cutting-edge modular systems from factory floor to live installation. \n Are you an experienced field engineer who wants genuine ownership and the chance to help build... \n \n \n ZIPC1_UKTJ

My client one of the UKs largest Facilities Management companies in the UK are looking for a Day Shift Mechanical Engineer in the Enfield area. \n The successful candidate will be doing PPM and reactive works, L8 training , minor plumbing works required i.e. changing TMVs/Taps etc also. \n Responsibilities include: \n • Carry out maintenance, reactive and installation works in accordance with approp... \n \n ZIPC1_UKTJ

Novara People are recruiting for an experienced Electrical / M&E Installation Engineer to join a specialist engineering business installing ventilation systems across London and the South of England.\n \n \nThis is a hands-on, site-based position involving regular travel to different customer sites. You'll work alongside a small engineering team, carrying out electrical and mechanical installations and en...\n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n \n ZIPC1_UKTJ

Air Conditioning EngineerLondon45,000 - 55,000Job OverviewWe are seeking an experienced and reliable Air Conditioning Engineer to join our team. The successful candidate will be responsible for carrying out installation, planned preventative maintenance (PPM), diagnostics and repairs on a range of commercial and residential air conditioning systems.The ideal candidate will have strong installation background along with fault-finding skills and hands-on experience working with leading manufacturers including Daikin, Panasonic, and Mitsubishi Electric systems.Key ResponsibilitiesCarrying out installationsCarry out planned preventative maintenance (PPM) on air conditioning systems.Diagnose and repair faults across a range of split, multi-split, VRV/VRF, and heat pump systems.Service and maintain equipment to manufacturer standards.Attend reactive breakdown callouts and resolve issues efficiently.Complete detailed service reports and maintenance documentation.Identify and recommend remedial works where required.Ensure all work is completed safely and in line with company procedures and industry regulations.Maintain high standards of customer service and communication while on site.Work independently and manage daily workload effectively.Participate in an out-of-hours callout rota where required.Ensure company vehicle, tools, and equipment are maintained in good condition.Essential Skills & ExperienceProven experience as an Air Conditioning Engineer (minimum 3 years)Strong working knowledge of:Daikin systemsPanasonic systemsMitsubishi Electric systemsExcellent fault-finding and diagnostic abilities.Experience carrying out servicing and maintenance works.Knowledge of VRV/VRF systems, split systems, and heat pumps.Ability to read and interpret technical drawings and wiring diagrams.Good understanding of refrigeration principles and electrical controls.Ability to work independently and as part of a team.Strong communication and customer service skills.Full UK driving licence.Essential QualificationsF-Gas Category 1 Certification.Relevant HVAC / Refrigeration & Air Conditioning qualification.NVQ Level 2 or Level 3 in Air Conditioning and Refrigeration (preferred).Desirable ExperienceExperience working in commercial environments including offices, retail, hospitality, and industrial sites.Manufacturer training certifications from Daikin, Panasonic, or Mitsubishi Electric.Personal AttributesReliable and punctual.Professional and presentable.Strong problem-solving skills.Positive attitude and willingness to learn.Able to remain calm under pressure.Organised with good attention to detail.

Junior Application Support Engineer TradingQuant Capital is urgently looking for an Application Support Engineer to join our high profile client.Our client is a well known global electronic trading business. They provide a market leading Execution Management System for buy and sell side clients as well as Algo Execution. They have offices globally (travel arranged for your benefit if wanted).The primary responsibility of the Application Support Specialist is to provide high level functional and technical support for the company’s products directly to the customer base. You will be joining a hardworking and dedicated Support team within an entrepreneurial and fast paced environment. You will also work closely with the company’s sales and engineering teams.On a day to Day basis the Support Specialist will:·Respond promptly to support requests and inquiries from clients·Support customers and resolve issues related to order entry, risk management, and exchange connectivity·Conduct analysis of complex order and trade histories·Document and track case histories, issues and actionable steps taken·Identify solutions to open issues / problems that are under investigation or pending resolution·Improve documentation of support policies and procedures·Work directly with new customers to coordinate deployment and configuration of the company’s products·Manage distribution and installation of software enhancementsApplication Support Specialists MUST have:STEM Degree Some experience of application support in financial technology Experience in finance Understanding of the trade lifecycle SQL You will be joining a progressive and exciting company committed to excellence. They offer an excellent working environment with on-going training and a structured career path. You can also expect an excellent salary and benefits package.My client is based in LondonLinux TT, RTS, Bloomberg, Scripting, Client Support, graduate

Squarepoint Capital's Infrastructure Services team is responsible for engineering the foundational services that power one of the world's leading quantitative investment firms. Our infrastructure spans global datacenters across AMER, EMEA, and APAC, encompassing bare metal compute, high-performance networking (Spine/Leaf, VXLAN/EVPN), GPU clusters, distributed storage (Weka, Vast), cloud (GCP/AWS), and a growing portfolio of platform services (Kubernetes, Slurm, Knative). We are seeking a hands-on Infrastructure Developer — a software engineer at heart who specializes in infrastructure automation through deep, programmatic integration of service-level APIs. This is not a traditional infrastructure operations role. You will write production-quality code every day, designing and building the API fabric that connects our Configuration Management Database (CMDB) to every layer of the infrastructure stack: physical sites, datacenter fabric, network, compute, storage, and cloud. This role is central to our multi-year strategy to eliminate 90% of manual infrastructure operations by 2027 through self-service, API-driven automation at every exposed layer of the stack. You will be the technical owner of the interaction model between our source of truth (CMDB) and the systems that act on it — from bare metal provisioning pipelines to network fabric configuration, from cloud resource management to workload scheduler integration.Position Overview API Design & Ownership Across the Infrastructure StackYou are the design authority for the API interaction model spanning all infrastructure domains:Bare Metal & Provisioning: API integration with provisioning systems to drive automated server lifecycle — from hardware discovery and BIOS configuration through OS installation, burn-in, and production handover. Target: zero human touchpoints in the provisioning pipeline.Network Fabric: API-driven configuration of Arista EOS VXLAN/EVPN environments — automating VTEP registration, VNI/VRF assignment, switch port configuration, and VLAN management. Cycle time target: < 1 minute for basic operations with no humans in the loop.Virtualization & Cloud: API integration with cloud providers (GCP, AWS) and on-premises virtualization platforms, enabling consistent resource lifecycle management across hybrid environments.Storage: API-driven management of file, block, and object storage services (Weka, Vast, S3-compatible) — including volume provisioning, replication policy, data lifecycle, and performance tier assignment.CMDB as Source of Truth: Own the enterprise CMDB API layer — a FastAPI microservices architecture (CI API, Fabric API, Bare Metal API) backed by PostgreSQL, deployed on Kubernetes/Knative — ensuring it is the authoritative, real-time source of truth for all infrastructure configuration items and their relationships.Infrastructure Automation EngineeringDesign and implement end-to-end automation pipelines that eliminate manual handoffs between teams (e.g., server provisioning network configuration storage attachment scheduler registration).Build event-driven workflows using Knative/Eventing and similar platforms to propagate infrastructure state changes across dependent systems automatically.Develop self-service interfaces (APIs, CLIs, internal developer portals) that delegate routine infrastructure operations to appropriate stakeholders — enabling teams to manage their own resources within defined policy guardrails without requiring Infrastructure team intervention.Implement policy-as-code integrations: translating high-level security and segmentation policies (Illumio, Cilium, firewall rules) into programmatic enforcement through the CMDB and automation layer.API Engineering Triage & Initiative ScopingLead API engineering triage: evaluate, scope, and validate new automation initiatives across the infrastructure stack.Work with product teams, vendors, and business stakeholders to understand service catalogs, planned vendor changes, and business priorities — translating them into API integration requirements.Allocate and coordinate implementation work across teams, ensuring the right problems are solved at the right abstraction level.Maintain a vendor API roadmap: track API capabilities and planned changes across all infrastructure vendors (Arista, Weka, Vast, RackN, MAAS, GCP, AWS, Equinix, etc.) and proactively plan integrations.CMDB Schema Design & Data ModelingOwn the evolving CMDB data model — designing schemas that capture the past, current, and future state of infrastructure across all layers (physical, network, compute, storage, cloud, application).Ensure the CMDB schema is tolerant of evolution: new CI types, relationship types, and attributes must be addable without breaking existing consumers.Model topological relationships between infrastructure components: rack server network port switch fabric VNI/VRF application workload.Integrate and subsume existing sources of truth (SIM, SIAM, Netbox, firewall rule databases, Ansible inventory, Illumio segmentation model) into the unified CMDB model over time.Design CI versioning and audit trails to support compliance, change management, and root cause analysis.Cross-Team Collaboration & Technical LeadershipBuild close working relationships with global infrastructure leads across Platform, Network, Storage, Cloud, and Security teams — as well as with application teams (Trading, Research, Development) and their business stakeholders.Serve as the technical bridge between infrastructure engineering and the broader Technology organization: from hardware provisioning teams to workload schedulers (Kubernetes, Slurm) to VDI and end-user services.Collaborate with Cybersecurity to implement identity-based, federated security policy enforcement through the API and automation layer — moving away from IP-based, manually managed firewall rules toward programmatic, application-aware policy.Contribute to the Infrastructure Platform Direction strategy, particularly the principle that infrastructure should be generated from a high-level description of need at the highest abstraction layer possible.The Technical EnvironmentYou will work across a rich and complex infrastructure stack:Physical Sites (L1): Global DCs + cloud regions; ColoDatacenter Architecture (L2): Rack standardization, GPU/compute/storage rack types, physical placement rulesNetwork & Connectivity (L3): Arista EOS, Spine/Leaf, VXLAN/EVPN, BGP/ECMP, RoCE, Illumio, Cilium, multi-site DCICompute & Storage (L4): Bare metal (Intel/AMD/GPU/FPGA), RackN, MAAS, Weka, Vast, NVMe/TCP, iSCSI, S3Schedulers (L5): Kubernetes (GKE + on-prem), Slurm, Knative, NomadRuntime (L6): Spinux (standardized Linux), containers, GPU runtime, HashiVaultCMDB / API Platform: FastAPI, PostgreSQL, SQLAlchemy, Pydantic v2, Knative Eventing, PythonCloud: GCP (primary), AWS; BigQuery, GKE, cloud storage, Sagemaker HyperpodObservability: Prometheus, Grafana, ELK/Loki, AkvoradoSource Control & CI/CD: GitLab, Jira, ConfluenceRequired Qualifications:Bachelor’s degree in computer science, Software Engineering, or a related technical discipline.10+ years of experience in software development, with a strong focus on infrastructure automation, systems integration, or platform engineering.Production-quality Python development: you write clean, tested, maintainable Python code as a core part of your daily work. Experience with FastAPI, SQLAlchemy, Pydantic, and async Python is highly valued.API design expertise: deep experience designing RESTful APIs, including resource modeling, versioning strategies, pagination, error handling, and OpenAPI/Swagger documentation.Schema and data modeling: proven experience designing relational database schemas (PostgreSQL preferred) for complex, evolving domains — including normalization, indexing, and schema migration strategies.Infrastructure domain knowledge: working understanding of at least two of the following domains — bare metal provisioning, network configuration (switching/routing), storage systems, virtualization, or cloud infrastructure.Systems integration experience: demonstrated track record of integrating heterogeneous systems via APIs — consuming vendor APIs, building abstraction layers, and managing API lifecycle across multiple upstream dependencies.Strong verbal and written communication: ability to translate complex technical concepts for both engineering peers and non-technical business stakeholders; comfortable presenting to senior leadership.Strong analytical and organizational skills: able to scope ambiguous problems, decompose them into actionable work, and drive execution across multiple teams.Experience with the Atlassian stack (Jira, Confluence) and Git (GitLab) — including using these tools for project tracking, documentation, and code review workflows.Nice to have:Experience with CMDB platforms: hands-on experience with enterprise CMDB vendors or open-source alternatives (ServiceNow, Netbox, Ralph, Device42, or similar) — including data model design, API integration, and migration from legacy sources of truth.Network automation experience: familiarity with network device APIs (Arista EOS, NAPALM, Netmiko, RESTCONF/NETCONF) and network automation frameworks.Kubernetes and cloud-native development: experience deploying and operating microservices on Kubernetes, including Knative, Helm, and GitOps workflows.Event-driven architecture: experience with event streaming platforms (Kafka, Knative Eventing, NATS) for building reactive infrastructure automation pipelines.Working knowledge of Rust: for performance-critical automation components or CLI tooling.Experience in financial services or other latency-sensitive environments: understanding of the operational rigor, change management discipline, and reliability requirements of production trading infrastructure.Security automation: experience integrating with microsegmentation platforms (Illumio, Cilium) or implementing policy-as-code for network security.Infrastructure-as-Code familiarity: experience with Terraform, Ansible, or similar IaC tools — and critically, an informed perspective on where IaC patterns are appropriate versus where a CMDB-driven API model is superior.The minimum base salary for this role is $100,000 if located in New York. This expectation is based on available information at the time of posting. This role may be eligible for discretionary bonuses, which could constitute a significant portion of total compensation. This role may also be eligible for benefits, such as health, dental, and other wellness plans, as well as 401(k) contributions. Successful candidates’ compensation and benefits will be determined in consideration of various factors.

Job Overview:The Principal Operations Engineer manages a team of Engineers for the preparation and execution of offshore/offshore pipeline and umbilical pre-commissioning operations. Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing platforms hundreds of miles from shore, using our expertise to design and build offshore wind infrastructure, and reshaping the onshore landscape to deliver the energy products the world needs safely and sustainably. For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries. Essential Qualifications and Education:10 plus years of experience in the oil and gas industry working for major Contractors.Experience managing a team of more than 6 Engineers.The following experience is required: General experience of all shallow and deepwater water installation operations.Rigid & flexible pipeline pre-commissioning and decommissioning experience - execution of a minimum of 10 projects.Umbilical pre-commissioning experience - execution of a minimum of 6 projects.Decommissioning and isolation knowledge is essential#LI-DNI#LI-HYBRID#LI-SJ1Key Tasks and Responsibilities:Liaise with installation team during early project execution to ensure alignment on methodologies.Work with Field Engineers to develop pre-commissioning execution methodologies for offshore and onshore projects.Coordinate engineering and planning for the timely execution of the work scope to include Document Deliverable Register management.Selection of the required pre-commissioning and marine spreads.Detailed reviewing of internal and external deliverables (drawings, reports, procedures, risk assessments, scopes of work, subcontracts).Coordinate the definition and ordering of equipment and installation aids.Coordinate the preparation of subcontractor scopes of works followed by the award and execution of the subcontract.Coordinate the preparation of pre-commissioning procedures.Vetting and approval of pre-commissioning subcontractor personnel, onshore and offshore.Coordinate mobilizing pre-commissioning equipment and vessels to execute work scopes.Coordinate testing and load-out of pre-commissioning equipment and installation aids.Liaise with pre-commissioning subcontractor and offshore project teams to resolve any technical issues encountered during offshore execution.Coordinate the demobilization of the pre-commissioning equipment, marine spread, and the off-hire of subcontract equipment.Coordinate Readiness review, Constructability, HAZID and HAZOP.Work at site and offshore as required by the project.Prepare MOC's with support from Field Engineers.Compile and present return of experience and lesson learned documents.To train and mentor Field Engineers and Senior Field Engineers. Set goals for your team to maintain the Project KPIs.Work with the Pre-Commissioning Technical Authority to align on pre-com execution methodologies.Manage pre-commissioning subcontracts.Support internal initiatives within the pre-commissioning operations group.Support in variation order request, technical deviation/Queries.Budget performance management.Risk Management & Cost Control.SIMOPS management.The Principal Operations Engineer will maintain strong interfaces with the various disciplines within the business line. The main interfaces for Pre-Commissioning are:Marine Operations Engineers (Inclusive of ROV & Survey) Engineering and Engineering ManagerSCMQHSESEnvironmental SpecialistsVessel Operations ManagersMarine Construction ManagerProject Managers and Project DirectorInterface Managers (For Projects that involve Consortium partners & Subsea Connectors) Hook-up & Commissioning Team Flow Assurance TeamFabrication TeamDocument Controller TeamBrownfield ManagersEnsure the Core Competencies of the greater organization are embraced.Live the Rules: Treat the Life-Saving Rules as non-negotiable principles that guide your daily decisions and routines. Lead by Example: Show your commitment through your actions and inspire others to do the same. Speak Up: Act immediately if you see something unsafe or identify a potential risk. Empower one another to intervene with courage and care. Educate and Share: Continue fostering conversations about the Life-Saving Rules within your teams, ensuring everyone understands their importance and application. Collaborate: Work together as One Team to make safety a shared responsibility, ensuring no one is left behind.Goals: Focus on and execute your most important goals. Feedback: Provide Positive and Instructive feedback on Team’s progress. Lay out the facts, don’t label and be clear. Vision: Together we will continue to enhance, grow and transform.Full timePosting Date: 2026-06-18

Platform Storage Engineer Quant Capital is urgently looking for a Platform Engineer to join our high profile client. My client is a well known international Broker. They have offices globally and are well known in the low latency and equities space. As a Platform Storage Engineer, the person will define, design and develop plans for installation/reconfiguration, and overall management of storage systems to provide reliable, resilient and secure data warehousing and management solutions. In this role, the person is expected to have strong knowledge of HP/Dell/NetApp storage solutions, backup software, operating systems, virtualization, hardware and related architecture, engineering and administration. They have excellent problem-solving skills and systems troubleshooting skills. The person should have passion to continuously improve services, enhance security and optimize service performance. Your Responsibilities: • Design, implement and maintain all aspects of storage, including the various tiers of storage (high-performance, low-cost, archive, backup/recovery, and disaster recovery). • Multi-protocol [CIFS, NFS] file-based solutions • Block-based high-performance All-Flash Arrays. • Object-based storage • Disk & Tape based backup solutions • Provides direct support to technical and non-technical entities in order to define requirements and deliver solutions to meet organisational needs including new deployments, upgrades, performance tuning and testing. • Implement and utilize asset inventory, configuration management database, capacity management, performance management, resource optimization, and security (access control, authorization, and accounting) for all technologies in scope. • Define requirements, perform research, evaluate vendors/solutions, design/implement solutions, and provide ongoing support for all technologies in scope. Provide simple but effective scalability, performance, and reliability. • Schedule and provide after-hours or weekend support when necessary to perform high-risk or planned downtime of IB’s data centre systems for upgrades and maintenance. • Participate in defining and executing on a roadmap of projects that continues to raise the bar through implementing innovative technology, tools, automation, and processes. • Interact with internal teams to provide solutions and resolve problems in a timely and proactive manner. • Administer and provide operational support and incident management for all storage infrastructures including archival and compliance. systems. Your Experience and Qualifications: • 5+ years of experience or equivalent certifications with Storage and related hardware • 5+ years of Linux/Windows Operating systems management and administration • 3-5 years of experience or certifications with Commvault backup solution, deploying and managing infrastructure services and driving efficient operations • 2+ years of experience with communicating technical value of cloud/object storage, storage gateways or cloud backups with Azure/AWS/GCS. • 2+ years of experience with Visio to create solution diagrams. • AWS Solutions Architect certification along with a storage certification from a major storage vendor such as HP/Dell/EMC, NetApp, Oracle or HDS • Strong experience in managing and supporting multiple storage systems such as HP Primavera and Dell EMC storage systems, in a highly virtualized, hybrid data centres and global offices. • Experience with storage protocols and technologies such as NFS, CIFS, iSCSI, Fibre Channel, NetApp Filers, Pure Flash array and Flash blade, Nimble, EMC ECS, Cohesity, or DAS. • Must have experience managing, optimizing, and upgrading backup environment and its schedules strategies. • Experience with client and server hardware/software, management tools, enterprise networking, virtualization, and/or security technologies. • Able to handle pressure during outages and systematically resolving issues. • Experience being tasked outside their training, willing to take on and learn new technologies. • Experience automating tasks utilizing PowerShell or Python.My client is based in London. This role offer some remote work but this will be office based.

Air Conditioning Installation Engineer Herts and Essex \n Domestic Installations £50 - £60k \n We are looking for an experienced and capable Air Conditioning Installation Engineer to join our growing team, specialising in high-quality domestic air conditioning installations. \n This role will involve the installation and commissioning of residential air conditioning systems, working in customers’ homes to deliver clean, professional, and high-standard installations. \n We are looking for someone who takes pride in their work, has strong installation experience, and can work independently while maintaining excellent customer service standards. \n \n Key Responsibilities \n\n • Installation of domestic split and multi-split air conditioning systems\n, • First and second fix installation works\n, • Pipework, containment, condensate and associated installation works\n, • Commissioning and testing of systems\n, • Ensuring installations are completed to a high standard\n, • Working professionally within occupied residential properties\n, • Maintaining excellent housekeeping and cleanliness on site\n, • Completing relevant job documentation and commissioning paperwork\n, • Liaising with customers in a professional and courteous manner\n, • Supporting the continued growth and reputation of the business\n\n \n Candidate Requirements \n Essential \n\n • Proven experience installing domestic air conditioning systems\n, • F-Gas qualified\n, • Ability to work independently and manage installations confidently\n, • Strong fault-solving and practical installation skills\n, • High attention to detail and pride in workmanship\n, • Good communication and customer-facing skills\n, • Full UK driving licence\n, • Reliable, professional, and well presented\n\n Desirable \n\n • Experience with leading manufacturers including Daikin, Mitsubishi, Fujitsu, LG or similar\n, • Electrical knowledge and understanding of installation regulations\n, • Experience commissioning systems\n\n \n What We Offer \n\n • Company van\n, • Fuel card\n, • Full-time permanent position\n, • Ongoing work within the domestic sector\n, • Opportunity to join a growing and ambitious company\n, • Supportive working environment\n, • Long-term progression opportunities\n\n \n This is an excellent opportunity for an experienced engineer looking to join a professional and growing business focused on delivering high-quality domestic installations and excellent customer service.

Gas Engineer (Commercial / Regional Patch) \n £42,000-£50,000 (OTE £55,000-£65,000) + Overtime + Door-to-door pay + Company Van + Fuel Card + Flexible Hours + Training + Qualification Support + Progression + Company Benefits \n Epsom- with regional travel \n Are you a Gas Engineer from a Commercial background looking for a varied role working on specialist Spray booths for a range of blue-chip clients across a regional patch within a leading company known for looking after and developing their staff who offer door-to-door pay and uncapped overtime to greatly increase your earnings? \n This industry-leading company are a manufacturer and distributor of spray booths for a broad range of clients across numerous industries including automotive, aerospace and rail. They have seen continual growth in the past 30 years and due to an ever increasing workload are looking to grow their friendly team. \n This varied role will see you working autonomously as you carry out a range of PPM in addition to some reactive breakdown work, upgrades and component installation on specialist spray booths. You will cover a regional patch (primarily within South London, Kent and Sussex), working a 40 hour week with any overtime and further travel paid at 1.5x. \n This exciting role would suit a Gas Engineer from an background looking to join a leading company who offer specialist training, the chance to greatly increase your earnings and to continually progress to senior roles. \n The Role: \n\n • Carry out planned servicing and breakdown repair on spray booths\n, • Hands on role including some working at height\n, • Undertake a range of associated maintenance work\n, • Covering a regional patch around South London, Kent and Sussex\n, • Door-to-door pay and generously paid, uncapped overtime (1.5x) over 40 hours\n\n The Person: \n\n • Gas Engineer or similar\n, • Commercial qualifications / experience\n, • Based near Epsom- Full Driving Licence\n\n Reference number: BBBH26558 \n Commercial, Gas, Service, Engineer, HVAC, Gas Safe, ACS, Maintenance, Reactive, Regional, Door-to-door, Bespoke, Field, COCN1, CODNCO1, South London, Croydon, Kent, Orpington, Sussex, Epsom \n If you are interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Commercial Boiler Service Engineer (Field Based) – South East England – London / Andover / Rochester – £47,000–£50,000 + Overtime \n\n • Pay: £47,000–£50,000 basic + overtime at 1.5x\n, • Location: Home/field-based, covering the South East of England, with access to the Andover or Rochester depot\n, • Permanent\n, • Benefits: 25 days holiday + bank holidays, pension (5% employee / 3% employer), corporate eyecare scheme, and discretionary benefits including group life assurance and private medical insurance after probation\n, • Field-based role: Company vehicle provided, with regular travel to customer sites across the South East\n\n Commercial Boiler Service Engineer (Field Based) – Company Overview: \n Our client is an established name in temporary plant hire, providing specialist heating and cooling solutions to commercial and industrial customers across the UK. As demand across the South East continues to grow, they are looking for an experienced Boiler Engineer to join their operations team. \n This is a home/field-based role working on the installation, commissioning, servicing and repair of temporary heating and cooling equipment across the region. You'll work on commercial equipment at customer sites, with the support of the wider depot and operations team. \n Boiler Engineer (Field Based) – The Role: \n This is a hands-on field service position where you'll install and commission temporary heating and cooling systems at customer sites, ensuring equipment is safe, compliant and operating to the required standard. \n You'll service and prepare equipment before delivery, diagnose faults and carry out repairs where required, responding to breakdowns and emergency call-outs when necessary. You'll work directly with customers on site, providing a professional service and keeping them informed throughout the job. \n You'll also complete accurate records of installations, servicing, repairs and safety inspections, while ensuring all work complies with relevant regulations, codes of practice and manufacturer requirements. \n The role involves regular travel across the South East, so you'll need to be comfortable working independently at different customer sites. You'll be provided with a company vehicle and the role offers regular opportunities for overtime paid at 1.5x. \n Commercial Boiler Service Engineer (Field Based) – What You'll Bring: \n You'll have proven experience installing, servicing and maintaining commercial heating equipment, together with the relevant gas qualifications. \n The following qualifications are essential: \n\n • COCN1\n, • CIGA1\n, • CDGA1\n, • ICPN1\n, • TPCP1/1A\n, • ICAE1\n\n Additional 18th Edition, OFTEC or F-Gas qualifications would be advantageous, as would previous experience working with chillers or other commercial cooling equipment. \n You'll have strong diagnostic and fault-finding skills and a methodical approach to troubleshooting. A safety-first mindset is essential, together with the ability to work professionally with customers and confidently manage jobs independently in the field. \n A full UK driving licence is essential, along with the flexibility to travel across the South East. \n DON'T MISS OUT ON THIS GREAT OPPORTUNITY – APPLY NOW \n Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. \n Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful. \n

Security Surveyor / Project Engineer/ Senior Engineer - Integrated Security Systems \n London & South East£55,000 - £65,000 Basic + Bonus + Car/Travel Allowance + Benefits \n Fire & Security Careers are recruiting on behalf of a leading Integrated Security Systems Installer seeking an experienced Technical Surveyor / Presales Estimator to check what work needs to be done and price projects and possible work in London. Could be a good role for a Senior or Project Engineer looking to gt off the tools from major Fault finding and Commissioning and do Surveys/ Design. \n This is a key customer-facing role responsible for surveying sites, designing integrated security solutions and ensuring projects are accurately priced before installation. The successful candidate will ensure that all cabling, containment, equipment, labour and installation requirements are identified and included within quotations to protect project profitability and ensure successful delivery. \n The role would suit an experienced Integrated Security Engineer (looking to get off the tools), Security Systems Estimator who does site surveys, Technical Security Surveyor, Integrated Systems Designer with hands on experience, Pre-Sales Engineer or Security Sales Surveyor with a strong technical understanding of enterprise-level security systems/ CCTV and Access Control. \n Key Responsibilities for Security Surveyor role - \n\n • Conduct detailed site surveys and customer meetings to price, design and estimate - equipment, systems, labour, etc.\n, • Assess project requirements and identify all installation, cabling and containment needs.\n, • Design and cost integrated security solutions.\n, • Produce accurate quotations, estimates and technical proposals.\n, • Ensure labour, equipment and infrastructure costs are fully captured.\n, • Liaise with customers, operations and project delivery teams.\n\n Required Experience - Technical Security systems so can price work/ projects. \n\n • Strong knowledge of integrated security systems, such as Milestone, Gallagher, ACT, Lenel, Avigilon, etc\n, • Experience with Enterprise CCTV and Multi-Door Access Control.\n, • Experience surveying, designing or pricing security projects.\n, • Understanding of cabling infrastructure, containment and installation requirements.\n, • Experience working on larger sites such as Universities, Hospitals\n, • Strong commercial awareness and attention to detail.\n\n Package \n\n • c. £55k - £65,000 Salary \n, • Bonus Scheme\n, • Company Car or Travel Allowance\n, • Pension and Benefits Package\n, • Permanent Position\n, • Career progression within a growing integrated security business\n\n Applicants should be based within the South East, Know IT/ Networked Access and CCTV/ Security Systems and able to travel to sites in London and surrounding areas . \n To apply, contact Steven Eley at Fire & Security Careers for a confidential discussion.

Lift Installation Engineer \n London - But have roles nationwide \n Salary: Up to £55,000 D2D \n Are you a Lift Installation Engineer looking to take the next step in your career? \n If the answer is Yes, please read on…. \n We are a well-known and established Lift Service, Installation and Repair company. Due to our ever-growing lift service portfolio, we are looking for a Lift Service Engineer to cover London \n Key Responsibilities of the successful Lift Installation Engineer: \n\n • Management of your own lift service engineer in London\n, • Attend lift breakdowns and undertake planned servicing and maintenance work.\n, • Providing Service and PPM work at customer sites\n, • Provide technical support and advice to customers and maximise the first-time fix rate\n, • Maintain a professional image at all times as you’re a company ambassador on site\n, • Travelling throughout the coverage area\n\n Key requirements of the successful Lift Installation Engineer: \n\n • NVQ Level 3 qualified in Lift Engineering\n, • 2 years of experience in a Lift Service / Maintenance Engineer position\n, • Relevant qualifications for the position, e.g. J Modules\n, • Proficient with fault finding, diagnosis and repair on either/both Passenger and Goods lifts\n, • Self-motivated, reliable, and organised\n, • Full UK driving licence and prepared to travel with the role\n\n If you are interested in this Lift Installation Engineer opportunity, please use the application link \n indoth

Trainee Air Compressor Engineer (Mechanical) £40,000 - £45,000 + Overtime (OTE £68,000) + Van + Progression + Training + 33 Days Holiday Watford \n Are you a Service Engineer from any mechanical background looking for full training on air compressors? \n Are you looking to cover a local patch with plenty of optional overtime, for a company who will invest in your career? \n In this role you will be responsible for servicing, installing, and working with air compressor systems, with further manufacturer training given. You will be provided with a company van as you cover a local patch across London and Hertfordshire. \n This company takes pride in delivering quality service and has a goal to expand their services to be 7 days a week allowing extra working opportunities for their staff. They are looking for a Field Service Engineer to join the team and progress within the company. \n This role would suit a Service Engineer from any mechanical background who is looking for full training on air compressors and cover a local patch in a provided van. \n The Role: \n\n • Servicing, installing and maintaining air compressors\n, • Full industry training provided\n, • Covering a local patch across Hertfordshire and London\n, • Monday to Friday, 8:00am - 5:00pm\n, • Up to 10 hours overtime weekly, paid at 1.5x\n\n The Person: \n\n • Service Engineer\n, • From any mechanical background\n, • Looking for full training on air compressors\n\n Reference Number: BBBH26135e \n Engineers, Engineer, Engineering, Compressors, Compressor, Service, Installation, Maintenance, Installer, Servicing, Mobile, Technician, Army, Forces, Navy, Progression, London, Hertfordshire \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV. \n We are an equal opportunities employer and welcome applications from all suitable candidates. The salary advertised is a guideline for this position. The offered renumeration will be dependent on the extent of your experience, qualifications, and skill set. \n Ernest Gordon Recruitment Limited acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. By applying for this job, you accept the T&C's, Privacy Policy and Disclaimers which can be found at our website.

Commercial Chiller Engineer (Field Based) – South East England – London / Andover / Rochester – £47,000–£52,000 + Overtime \n\n • Pay: £47,000–£52,000 basic + overtime\n, • Location: Home/field-based, covering the South East of England, with access to either the Andover or Rochester depot\n, • Permanent\n, • Benefits: 25 days holiday + bank holidays, pension (5% employee / 3% employer), free parking, corporate eyecare scheme, and discretionary benefits including group life assurance and private medical insurance after probation\n\n Commercial Chiller Engineer (Field Based) – Company Overview: \n Our client is an established name in temporary plant hire, providing specialist heating and cooling solutions to commercial and industrial customers across the UK. They are looking for an experienced Chiller Engineer to join their service team, working on the installation, servicing, repair and maintenance of temporary chiller equipment across the South East. \n This is a home/field-based position, with engineers able to work from either the Andover or Rochester depot, depending on location. The role offers a varied workload, regular overtime and the opportunity to work with specialist commercial cooling equipment. \n Commercial Chiller Engineer (Field Based) – The Role: \n This is a hands-on field service role involving the installation, servicing, repair and maintenance of temporary chiller units at customer sites. You'll attend planned installations and service visits as well as responding to breakdowns, diagnosing faults and getting equipment back into service as quickly as possible. \n You'll also assist with boiler installations during the winter season and install AC units when required. The role involves practical problem-solving on customer sites, adapting to different equipment, site conditions and customer requirements. \n When you're not attending field-based jobs, you'll work with the depot team to maintain van stock, order parts and ensure the equipment and stores are ready for upcoming work. \n There is also scope to contribute to the development of new products and improvements to service operations, while maintaining high standards of health, safety and compliance at all times. \n Commercial Chiller Engineer (Field Based) – What You'll Bring: \n You'll ideally have at least 3 years' experience working on commercial chillers and hold a current F-Gas qualification, together with a full UK driving licence and CSCS card. \n You'll need strong fault-finding and problem-solving skills, good communication and organisational abilities, and the confidence to work independently at customer sites. A methodical approach, good IT skills and up-to-date knowledge of health and safety requirements are also important. \n You'll be flexible, reliable and customer-focused, with the ability to work effectively as part of a wider service team. \n Previous experience in the HVAC hire industry, an electrical qualification, or MOD clearance and site experience would be advantageous but are not essential. \n DON'T MISS OUT ON THIS GREAT OPPORTUNITY – APPLY NOW \n Get Staff acts as an employment agency for permanent recruitment and employment business for the supply of temporary workers. \n Please note that if you have not been contacted within 7 days, your application for this position has been unsuccessful.

At ORONA, we are global leaders in the design, manufacture, installation, maintenance and modernisation of lifts, escalators, moving ramps and walkways. Operating in over 100 countries, with 330,000 lifts worldwide using our technology and 2 manufacturing plants, we are proud to be Number 1 in Europe for complete lift production capacity. \n The Role \n We are looking for a Lift Field Technician to join our Service Team covering East London and surrounding areas. You will be an experienced Service Engineer with an NVQ Level 4 in Lift Engineering and LEIA training. \n Key Responsibilities \n ·Providing technical support using problem solving techniques to provide solutions and recommendations \n ·Testing lift modernisations \n ·Using your expertise to solve technical problems associated with lift/elevator call outs and repairs \n ·Supporting a team of Service Engineers using your experience of working with Orona and other lift products \n ·Obtaining and enhancing knowledge on a wide range of lift types and equipment \n ·Managing your time covering a geographical region working on your own initiative \n What We’re Looking For \n ·Proven experience within the lift industry \n ·NVQ level 4 \n ·Lift Types Knowledge - Reasonable understanding of all major competiors equipment. \n ·Problem Solving – able to identify problems, break them down into smaller elements, pin point possible solutions, prioritise these different elements and construct an action plan for tackling the problem. \n ·Full clean UK Driving Licence \n ·Right to Work in the UK (mandatory) \n If you are ambitious, safety-driven, and ready to take the next step in your lift engineering career, we would love to hear from you. \n Why Join ORONA? \n We offer more than just a job — we offer long-term career development within a stable and growing company. \n What We Offer: \n Attractive Salary: Competitive pay that reflects your skills and experience \n Generous Holiday Allowance: Enjoy 25 days of annual leave, increasing to 30 with service, and 8 public holidays \n Secure Future: Benefit from a pension scheme with increasing company contributions as you grow with us \n Peace of Mind: Life Inssurance to support you and your loved ones \n Health & Wellbeing: Medical Cash Back Plan to help with health costs, plus access to 24/7 GP services \n Family-Friendly Benefits: Enhanced leave for family-related events and emergencies \n Support When You Need It: Employee Assistance Programme offering confidential support for personal or work-related challenges \n Eye Care: Eyecare vouchers to help keep your vision sharp \n Recognition for Longevity: Long Service Awards to celebrate your milestones with us \n Referral Rewards: Earn a Recruitment Referral Fee by helping us find top talent \n Continuous Growth: Ongoing Training & Development opportunities to support your career journey \n Join ORONA and be part of a company moving the world safely and efficiently every day. \n

Enterprise Security Systems Technical Project Manager (Sipass Access Control) - London - c. £70k \n\n • Salary c. £70,000 (depending on experience)\n, • Occasional overtime when required.\n, • Company Vehicle\n, • Account Manage and progress projects in large sites in London.\n, • Permanent Benefits\n\n *Are you a Security Systems Commissioning Project Manager OR Commissioning Engineer seeking off the tools - working London? \n We are looking for a confident and technically capable Project Manager Commissioning Engineer or Project Engineer with experience of commissioning and project managing large, complex integrated PC based enterprise security systems \n\n • You would be used to commissioning Access Control and IP CCTV systems\n, • Have networking and Integration of Multidoor access and software based CCTV experience such as Genetec, Avigilon, Siemens SiPass, Axis, Lenel S2, Milestone, etc\n, • Coordinate and inform consultants, in house teams, IT departments and end users to deliver projects safely, ontime and to technical spec\n, • Survey Sites and Design/ Advise on solutions\n, • Deal with Customers/ Clients when managing projects to completion\n, • Account Manage to ensure clients/ customers are getting what they want\n, • Lead the successful delivery of complex integrated physical security projects valued from small upgrades through to large multi-site NHS programmes.\n, • Do project planning, design reviews, buying, organisation, commissioning to client handover.\n, • Manage Contractors and engineers throughout projects.\n, • Coordinate installation of enterprise Access Control, CCTV, VMS and network infrastructure across live environments\n, • Provide senior technical support to Engineers\n\n Duties will be on large sites in and around London such as Universities, Hospitals and you would be using engineering skills and project management abilities both. \n Skills such as fault-finding, communicating with clients, advising and using customer-facing skills, such as the ability to manage installs/ project management, leading other engineers, and seeing projects through to successful completion and handover for CCTV, and Access control on large enterprise level security systems. \n • Experience or Manufacturer Training in some of the following systems would be particularly beneficial for you to be right for Technical Security Project Manager/ Project Engineer or Intergrated Security Commissioning Engineer here: \n\n • Essential = Siemens/ Vanderbilt - SiPass\n\n Beneficial \n\n • Milestone XProtect\n, • Genetec Security Center\n, • Avigilon\n, • Axis Communications\n, • Paxton\n, • ACT\n, • IT and Networking\n, • PC Based systems\n\n You could be Project Engineer/ Project Manager/ Commissioning Engineer who commissions and can complete projects Sipass projects? \n If you are Integrated Security Project Manager, Enterprise Security Project Engineer or Security Project Manager, Senior networked Security Systems Engineer, Security Systems Commissioning Engineer with project and client skills, Integrated Security project Engineer, or Enterprise Security Engineer with commissioning, Fault finding, surveying skills as well as abilities to project manage jobs to finish with client contact \n Please do contact us exclusively if you are at the Networked Access Level and are Project Manager who still commissions, or are technical Senior Integrated Engineer who deals with clients... could be great role with independant Security installer. \n We are a specialist Fire and Security Recruitment agency to help you if you have the experience above and are commutable to London from within the South East. \n Contact me by googling, calling me or applying just to me Steve Eley - Fire and Security Careers - Recruitment

Fire and Security Trainer (Full Training Provided) \n Watford \n £45,000 - £48,000 + Bonus + Monday to Friday + Pension + Career Progression + Full Training \n Are you an experienced Fire & Security engineer looking to step off the tools and into a role where your expertise can make a real-world impact? \n Do you want to play a key part in raising standards across the industry by training, developing, and mentoring the next generation of engineers? \n This innovative and forward-thinking training provider is at the forefront of Fire & Security education in the UK. With a mission to upskill and professionalise the sector, they deliver high-quality, hands-on training that blends face-to-face teaching, online delivery, and bespoke commercial solutions across the full Fire & Security spectrum-including Fire Detection & Alarm Systems, CCTV, Access Control, and Intruder Alarms. \n As a key member of our commercial training team, you'll play an integral role in developing and delivering high-quality, impactful commercial training-both face-to-face and online-across the full range of Fire & Security disciplines. You'll contribute to the creation of engaging course content, tailored training solutions, and accredited qualifications that reflect the latest industry standards and best practices. \n The ideal candidate would be an experienced Fire & Security professional with strong technical knowledge-particularly in fire alarm systems-and a genuine passion for sharing expertise. They would bring a keen interest or proven experience in training and development, along with a working knowledge of Learning Management Systems (LMS) and e-learning tools. \n Whether you're already involved in training or are a seasoned engineer ready for the next step, this is a fantastic opportunity to transition into a training role where you'll be fully supported, trained, and developed. \n The Role: \n *Monday to Friday, 37.5 hours per week \n *Home-based with travel involved \n *Working out of the Warrington office \n *Deliver engaging and high-impact training in Fire & Security disciplines across: \n -Fire Detection & Alarm Systems (Design, Installation, Commissioning, and Maintenance) \n -CCTV / Video Surveillance Systems \n -Intruder & Hold-Up Alarms \n -Access Control \n *Develop and tailor training programmes and materials for face-to-face, remote, and blended delivery \n *Contribute to Skills On-Demand LMS and e-learning resources \n *Help audit and maintain training content to ensure industry compliance and quality standards \n *Assist with course accreditation, application processes for AO status, and the development of qualifications aligned with FireQual, EAL, and other frameworks \n The person: \n *At least 3 years' experience in Fire & Security engineering (essential) \n *Live within a commutable distance to Watford. \n *Strong knowledge of fire alarm systems and industry standards \n *A genuine interest in mentoring, teaching, or coaching others \n *Excellent communication and presentation skills \n *A collaborative approach with the confidence to work independently when required \n *Desire to grow with a business that values innovation and continuous improvement \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

\n • Carrying out planned preventative maintenance across security systems.\n, • Supporting and maintaining enterprise-level Access Control, CCTV and Intruder\n, • Working closely with Service Coordinators and client stakeholders to prioritise\n\n Embedded Security Systems Technician – London (EMEA Travel) \n Join a Global Leader in Security Technology Are you an experienced Security Systems Engineer looking for your next challenge? Do you enjoy working with cutting-edge technology, solving complex technical issues, and supporting high-profile corporate environments? \n We're working with a global security integrator that delivers industry-leading security solutions to some of the world's biggest organisations. Due to continued growth, they're looking for an Embedded Security Systems Technician to join their team, based in London, with occasional travel across the EMEA region. \n This is a fantastic opportunity to become part of a dedicated embedded team, supporting a prestigious global client while working with some of the latest enterprise security technologies. \n The Role As an Embedded Security Systems Technician, you'll be based within a major corporate environment, ensuring the smooth operation of critical physical security systems. Your role will involve a mix of planned maintenance, reactive fault finding, system support and installation work, helping to keep the client's security infrastructure operating at the highest standard. \n You'll work closely with both local and international teams, providing excellent technical support and ensuring all systems remain reliable, compliant and fully operational. \n No two days are the same, so we're looking for someone who enjoys variety, takes pride in delivering a first-class service and is comfortable working in a fast-paced environment. \n What You'll Be Doing \n\n • Carrying out planned preventative maintenance across security systems.\n, • Responding quickly to reactive service calls and fault finding.\n, • Supporting and maintaining enterprise-level Access Control, CCTV and Intruder systems.\n, • Working closely with Service Coordinators and client stakeholders to prioritise daily activities.\n, • Maintaining the health of installed security systems through regular testing and inspections.\n, • Diagnosing and resolving technical faults efficiently.\n, • Completing installation and commissioning work where required.\n, • Producing accurate service reports and maintaining system documentation.\n, • Managing local stock of critical spare parts.\n, • Working alongside global teams to ensure systems meet company standards and service level agreements.\n, • Following all site Health & Safety and compliance procedures.\n\n What We're Looking For We're keen to speak with experienced security engineers who have worked on high-end integrated security systems. \n Ideally you'll have: \n\n • Lenel Expert Certification (essential)\n, • 5+ years' experience within high-end security integration\n, • Strong knowledge of: \n \n, • Access Control\n, • CCTV\n, • Intruder Alarm Systems\n, • Enterprise Physical Security Systems\n \n, • Experience working with IP-based security systems, networking and PoE technologies.\n, • Knowledge of systems such as Axis, Bosch and TRAKA would be highly advantageous.\n, • Excellent fault-finding and problem-solving skills.\n, • Ability to interpret technical drawings and project documentation.\n, • Good knowledge of Microsoft Office including Outlook, Excel and PowerPoint.\n, • A professional, customer-focused approach with excellent communication skills.\n\n What's On Offer? \n\n • Opportunity to work for a globally recognised security technology business.\n, • Embedded role supporting a prestigious enterprise client.\n, • Exposure to cutting-edge security technologies.\n, • Long-term career development and training opportunities.\n, • Collaborative international team environment.\n, • Occasional travel across the EMEA region.\n, • Competitive salary and benefits package.\n\n Interested? If you're an experienced Security Systems Engineer looking to work on enterprise-level technology within a world-class environment, we'd love to hear from you. \n Apply today or get in touch for a confidential conversation to find out more.

Your Company: \n NET Recruit is proud to be partnering with a highly successful and growing engineering organisation in their search for a Data Centre Sales Engineer. This is an exciting opportunity to join a forward-thinking business specialising in HVAC, Process Cooling, and temperature control solutions, with a particular focus on supporting customers operating within the rapidly expanding Data Centre sector. \n With a strong reputation for technical expertise, customer service, and innovative engineering solutions, the business is continuing to grow its customer base and is looking for a commercially driven Sales Engineer who can combine technical understanding with strong relationship-building and business development skills. \n Your Role and Responsibilities While in this position, your duties may include but are not limited to: \n\n • Identifying and targeting new customers requiring HVAC, Process Cooling, and temperature control solutions.\n, • Developing and implementing effective sales strategies to generate new leads and convert opportunities into sales.\n, • Building and maintaining a strong sales pipeline, ensuring all opportunities and customer information are accurately recorded within the CRM system.\n, • Conducting market research to identify emerging trends, competitor activity, and new business opportunities, particularly within the Data Centre sector.\n, • Developing strong relationships with both new and existing customers and acting as a trusted technical point of contact.\n, • Understanding customer requirements and recommending appropriate equipment and technical solutions based on their specific needs.\n, • Providing technical guidance on process chillers, temperature control units, associated equipment, and installation requirements.\n, • Conducting customer site visits and assessments to understand technical requirements and develop appropriate solutions.\n, • Working closely with engineering and project management teams to develop and deliver customised solutions.\n, • Preparing and presenting proposals, quotations, and technical solutions to customers.\n, • Following up with customers throughout the sales process and providing appropriate after-sales support.\n, • Supporting customers with technical queries, troubleshooting, maintenance advice, and coordination with internal technical teams.\n, • Preparing regular sales forecasts, pipeline reports, and performance updates for management.\n, • Analysing customer feedback, market developments, and competitor activity to identify opportunities for further growth.\n, • Working collaboratively with marketing teams to support promotional activity and generate new commercial opportunities.\n, • Working towards agreed sales and performance targets while contributing to the wider growth strategy of the business.\n\n What You Will Need to Apply: \n To be considered for this opportunity, you will ideally have previous experience in a Sales Engineer, Technical Sales, Business Development, Account Management, or similar customer-facing commercial role, preferably gained within the HVAC, refrigeration, process cooling, engineering, or a related technical industry. \n An engineering qualification or relevant practical engineering experience would be advantageous, together with the ability to understand technical products and translate customer requirements into appropriate solutions. Experience with process chillers, temperature control systems, HVAC equipment, refrigeration, or similar technologies would be particularly beneficial. \n You will need to demonstrate strong communication and relationship-building skills, with the confidence to engage with customers at different levels and develop long-term commercial partnerships. You should be comfortable conducting customer meetings and site visits and explaining technical solutions clearly to both technical and non-technical stakeholders. \n A proven track record of generating new business, developing sales pipelines, and achieving or exceeding sales targets is essential. You will be commercially driven and proactive, with strong negotiation and problem-solving skills and the ability to identify opportunities and take them through to completion. \n You should also be confident using CRM systems and Microsoft Office, with strong organisational skills and the ability to manage multiple opportunities and priorities effectively. \n A valid UK driving licence and the right to work in the UK are essential for the role, as regular customer travel will be required. \n What You Will Get in Return: \n In return for your skills and experience, you will receive a competitive salary and comprehensive benefits package, including a company car or car allowance, pension, healthcare, life insurance, bonus scheme, and access to wellbeing initiatives. You will join a fast-paced and forward-thinking organisation where no two days will be the same. The role offers the opportunity to work closely with customers, engineers, and project teams while developing your technical and commercial expertise within a growing and increasingly important area of the engineering sector. \n The company provides a structured induction programme alongside continued training and development, ensuring you have the support and resources required to succeed in the role. \n If you are an ambitious Sales Engineer looking for a role that combines technical expertise, business development, customer relationships, and strong earning potential, this could be an excellent opportunity for your next career move. \n To express interest in this role and have a confidential chat, please reach out to: \n Christina Smith - Senior Talent Acquisition Specialist \n M: E:

Are you handy with tools and looking to kick-start your engineering career with full hands-on training, expert mentoring and the opportunity to work on exciting projects across the UK? If so, we want to hear from you! \n Trainee Engineer \n 10 mile radius of SE7 – UK nationwide travel with overnight stays \n\n • Full Time Permanent \n, • £30,000 - £32,000 per year with overtime\n, • The standard hours are 8.30am – 5pm Monday – Friday. Overtime is paid for any hours over this at normal time – time and a half for Saturday work and double time for Sunday working.\n\n Please note - you must be authorised to work in the UK. \n SCCI are looking for a keen and enthusiastic Trainee engineer to join their engineering team. They are expanding quickly and are looking for someone with some IT knowledge who can use basic hand tools and is eager to learn. \n Over the past 30 years SCS has evolved into the one of the UK’s leading installation and maintenance companies providing pioneering technologies, systems and services to private and public sector companies. \n Working within the engineering team with a lead engineer, the Trainee Engineer will work on contracts nationally. Their customer base consists of Vodafone, Travelodge, Premier Inn EE , Ladbrokes and various other large companies including housing associations and other hotel chains. \n You will be teamed up with a Senior Engineer who will teach you everything you need to know to work towards becoming an engineer in the future. \n You need to be unafraid of hard work and willing to learn new skills to enable you to undertake work on your own as soon as possible. \n What you'll be doing: \n\n • Assisting the Lead Engineer on installation work as issued by the Project Manager\n, • Pro-actively learning quickly how to undertake work for your lead engineer and eventually installation and service calls on your own\n, • Using your IT knowledge to learn how to take on work on your own.\n, • Being aware of health & safety risks in and around your work area for yourself and others\n, • Completing documentation as required and requested by lead engineer\n\n What you'll need: \n\n • Some IT knowledge\n, • Willingness to learn and take on challenges on a daily basis\n, • Good practical skills and be able to use basic hand tools\n, • A full driving licence held for at least 1 year is essential\n, • Health & Safety knowledge – full training provided\n, • Working at heights is a necessity but full training will be given\n\n What we offer: \n\n • Salary: £30,000 - £32,000 with overtime\n, • Full-time role with development opportunities\n, • Bank Holidays off in addition to 22 days' annual leave allowance\n, • Auto-enrolment pension\n\n How to apply for the role: \n If you have the skills and experience required for this position, click “apply” today and check your inbox for an email providing more information on how to complete your application and provide any other supporting documents. \n You must be authorised to work in the UK. No agencies, please. \n SCS are an equal opportuities employer. \n Successful applicants will need to undergo a DBS check. \n Other suitable skills and experience: installation engineer, labourer, handyman, maintenance technician, IT support.

Service Engineer (Plumbing / Air Con / Water / Mechanical) \n £38,000 - £45,000 + Door to Door + Full Training + Product Specialist Progression + no call outs + 33 days rising to 38 + Van + Phone + Fuel Car + Health Cash back + 39 Hours Per Week + Income Protection + Life Insurance + Private Healthcare + £300 Per Year Gym Contribution \n Home based, covering a local area, commutable from Watford, Luton, Aylesbury, High Wycombe, Harrow, Maidenhead and surrounding areas \n Are you a Service Engineer looking to join a globally renowned German and Swiss manufacturer, where you will be heavily invested through technical training into the HVAC industry, whilst increasing your earnings through door to door overtime, all whilst having a fantastic work life balance, with rare stays away and no call outs? \n This is a rare and exciting opportunity to growth, to join a prestigious industry leading manufacturer to become a product expert, where you will be invested in through technical training and further progress your career covering installation, surveying and contractor management. \n This company, have a global presence and due to growing their installation team, they are looking to recruit Installation Engineer with technical training and future scopes of career progression. \n The Role: \n *Servicing and Repair of bespoke HVAC systems \n *Full Training to become a product specialist \n *Working across the South East with some requirement to stay away, with occasional stays away \n The Person: \n *UK Drivers License \n *Mechanical, Air Con, Plumbing, Water background or similar \n Reference Number: 275664 \n To apply for this role or to be considered for further roles, please click "Apply Now" or contact Jacob Hole at Rise Technical Recruitment. \n Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles. \n The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set and will be decided by our client, the employer. Rise are not responsible or liable for any hiring decisions made by the end client. \n We are an equal opportunities company and welcome applications from all suitable candidates.

Job description \n Location: London Borough of Camden \n Contract: Temporary to permanent \n Hours: 36 hours per week, excluding unpaid lunch breaks \n Working arrangement: Van-mobile \n About the role \n Camden Facilities Management is looking for an experienced Air Conditioning and HVAC Engineer to carry out PPM, servicing, reactive repairs, fault-finding and minor installation works across Camden?s corporate buildings, schools and other public buildings. \n The engineer will help maintain safe, comfortable and energy-efficient environments and will work alongside Camden?s electrical and mechanical engineers as part of the M&E Operations Team. \n Key responsibilities \n\n • Service, maintain and repair split, multi-split, VRV/VRF and DX systems.\n, • Maintain heat pumps, fan coil units, AHUs and extract and supply ventilation systems.\n, • Diagnose faults and replace components such as compressors, expansion valves, fan motors, PCB controls, sensors and contactors.\n, • Undertake refrigerant leak detection, recovery, pressure testing and system evacuation in accordance with F-Gas requirements.\n, • Carry out commissioning and seasonal performance inspections where required.\n, • Complete AHU inspections, filter and belt replacement, coil cleaning, condensate tray cleaning and drain testing.\n, • Inspect fans, motors, ventilation equipment and associated controls.\n, • Support the maintenance of pumps, pressurisation units, expansion vessels, calorifiers, plate heat exchangers, motorised valves and heating controls where competent.\n, • Identify underlying faults and recommend effective remedial work to improve performance and reduce repeat failures.\n, • Maintain accurate and timely records using Camden?s CAFM system and issued mobile technology.\n, • Work ?live? by recording findings, materials, actions and completion details while attending sites.\n, • Manage and prioritise an allocated workload to meet PPM and reactive maintenance targets.\n, • Liaise professionally with school staff, caretakers, building users, contractors and colleagues.\n, • Complete dynamic risk assessments and comply with permit-to-work, working-at-height and other relevant safety procedures.\n, • Maintain the work vehicle, tools and equipment appropriately.\n\n Essential qualifications and experience \n Candidates must be able to evidence: \n\n • NVQ Level 3 or an equivalent recognised qualification in Refrigeration and Air Conditioning.\n, • Current F-Gas Category 1 certification.\n, • Practical experience maintaining split, multi-split and VRV/VRF systems.\n, • Experience maintaining AHUs, FCUs, ventilation systems, heat pumps and commercial HVAC equipment.\n, • Strong diagnostic and fault-finding ability.\n, • Experience delivering both PPM and reactive maintenance.\n, • Experience working independently in occupied buildings.\n, • A full UK driving licence.\n, • Competence using mobile devices or CAFM systems to maintain accurate job records.\n\n Desirable experience or qualifications \n\n • City & Guilds 18th Edition.\n, • Basic electrical fault-finding.\n, • BMS knowledge.\n, • Water Hygiene Awareness.\n, • IPAF or PASMA.\n, • Experience working within education, local authority, NHS or other public-sector estates.\n, • Experience maintaining associated mechanical plant.\n\n Standards expected for both positions \n We need engineers who: \n\n • Are dependable, punctual and communicate promptly when an issue could affect attendance or delivery.\n, • Take responsibility for allocated work and follow jobs through to an appropriate conclusion.\n, • Work safely and remain within their technical competence.\n, • Produce clear, accurate and meaningful maintenance records.\n, • Use the issued tablet or mobile device consistently as part of normal working.\n, • Manage their workload without requiring continual supervision.\n, • Treat customers, colleagues and contractors professionally and respectfully.\n, • Follow reasonable management instructions and Camden procedures.\n, • Take pride in the quality of their workmanship.\n, • Are comfortable working in schools and other occupied public buildings.\n, • Cooperate with colleagues and contribute positively to the wider team.\n

TXP are currently recruiting for multiple IT/EPOS Engineers across the UK \n The successful engineers will work on an initial 2-month project to include but are not limited to: \n\n • EPOS Installation\n, • Back Office IT/Server Installations\n, • PED Installations\n\n What are we looking for? \n\n • Experienced IT/EPOS/ATM engineers with experience of installation and fault finding of IT and EPOS equipment\n, • Able to pass and obtain DBS criminal history check\n, • Engineer must have full UK manual driving licence with no more than 6 points\n, • Must be able to stay away from home, role will require UK wide coverage\n\n Working Hours \n\n • Start Date: 10th September\n, • End Date: 30th October\n, • Monday to Friday morning (night shifts)\n\n What's on offer? \n\n • You will be paid up to £155.34 per day via an Umbrella company\n, • £15 meal allowance applicable when staying away from home\n, • Van, fuel card & travel expenses\n, • Any overtime (more than 9 hours a day inclusive of travel) is paid at £17.26 per hour, overtime is very likely\n\n IR35 Status \n This role has been assessed and deemed an Inside IR35 role.

Design Engineer / Chingford / Up to £50,000 Overview: \n Our client who are a in the Point of Sale industry are currently seeking a Design Engineer to join their team to assist in modifying existing and designing new bespoke displays for clients. \n This is an excellent opportunity to excel your design career with future progression available. \n Role & Responsibilities: \n\n • Use Solidworks to create retail furniture\n, • Provide technical support and assembly drawings to support the sales team in quoting\n, • Create and maintain engineering drawings and specifications to the customers needs\n, • Using the Product Lifecycle Management system to complete drawings\n, • Attend client meetings\n, • Liaise with project managers and manufacturing team throughout the product prototype process\n, • Produce detailed reports from meetings regarding key points\n, • Specify best materials for the project with regards to project\n, • Liaise with clients regarding specific requirements\n, • Creating installation manuals\n, • Update planning schedules\n\n Essential Skills & Experience: \n\n • 3+ years working in a similar position in the Point of Sale industry\n, • Confidence to speak to clients\n, • Experience on Solidworks\n, • Experience using the Adobe Creative Suite\n, • Team player\n\n Package: \n\n • Up to £50,000 basic salary\n\n\n, • 26 days annual leave + Bank holidays \n, • Pension Scheme\n, • Hybrid working \n, • Great team environment\n, • Social events\n\n Design Engineer / Chingford / Up to £50,000

Field Service Engineer (Doors/Shutters) \n London \n £40,000 to £45,000 + Unlimited Overtime + Company Van + Door2Door Pay + Fuel Card + Personal Use + Training + Pension + Generous Holiday Scheme \n Are you a Field Service Engineer or similar looking for a role which offers a Company Van with Personal Use, Door2Door pay, and Unlimited Overtime opportunities? \n Do you want to join an Automated Door company who were established nearly 20 years ago and now have over 25 employees, demonstrating their stable workflow and employee retention? \n In this role you will be responsible for travelling to Site, Maintaining, Installing, and Repairing Automated Door Systems all across London. You will also be provided with in house and external training courses if there are any parts of your skillset which aren't fully developed. \n This role would suit a Field Service Engineer looking for a stable role going out to Site working on the Maintenance, Installation, and Repairing of Automated Door Systems and Shutters within a well-established company who are offering 25 days holiday + bank holidays and Unlimited Overtime. \n The Role: \n\n • Installing, Maintaining, and Repairng Automated Door Systems\n, • Travelling to sites across London\n, • Training provided to top up skillset\n\n The Person: \n\n • Field Service Engineer with experience in the Door/Shutter industry\n, • Maintenance, Installation, and Repairing on Doors or Shutters\n, • Commutable to London\n\n Reference: BBBH26957 \n Keywords: Door Engineer, Maintenance, Repairring, Installation, London, Door2Door, Personal Use, Company Van, Fuel Card, Automated, Shutters, Field Service, Unlimited Overtime, Generous Holiday Scheme, On Site, Travel \n If you're interested in this role, click 'apply now' to forward an up-to-date copy of your CV.

We are seeking an experienced Medical Field Service Engineer, to cover London and surrounding area (Berkshire). You will ideally be located in the Hayes / West Drayton area. \n Function/Business Area: Technical Service \n Summary \n The Field Engineer is tasked with the installation, servicing, repair, and maintenance of Vantive products. This role is essential for maintaining high standards of service and ensuring customer satisfaction while adhering to company procedures, particularly in areas such as service documentation and environmental health and safety. \n \n Key Accountabilities \n\n • Install, service, repair and maintain products, distributed by Vantive in the defined area of responsibility as per the defined service documentation and the quality system framework.\n, • Establish & maintain timely customer communications & relationships, along with other key stakeholders (e.g. team members and business units).\n, • Report all relevant service activity, ensuring updated and accurate service data in the service system (all work orders should be closed within the same day).\n, • Responsible for maintaining and documenting the assigned calibration equipment.\n, • Provide technical support for in-bound calls from customers & patients, document the job on the system and undertake the relevant actions.\n, • Maintain up-to-date technical competence in assigned products by completing the relevant training and development.\n, • The Field Engineer plays a crucial role in ensuring the reliability and effectiveness of Vantive products in the field. By focusing on customer relationships, technical support, and continuous improvement, the Field Engineer contributes significantly to the overall success of the organization and the satisfaction of its clients. This position not only requires technical skills but also a proactive approach to identifying business opportunities and enhancing service delivery.Review KPIs regularly and adapt the working practices to ensure service level is maximized.\n\n Qualifications \n\n • Degree, HNC/HND or equivalent level qualification in the relevant engineering field (e.g medical technology, electronic, mechanical) would be advantageous.\n\n Skills \n\n • Strong attention to detail\n, • Strong verbal and written communication skills\n, • Good organisation and prioritisation skills\n, • Good proficiency in Microsoft Office (including Outlook, Excel)\n, • Good technical problem solving skills\n, • Basic level of commercial awareness would be advantageous\n, • Good administration skills\n\n Experience \n\n • In-depth level of practical experience (e.g. circa 3 years of proven experience as a minimum) in the relevant technical/engineering discipline with measured KPIs\n, • Demonstrable experience in meeting business-critical timeframes and deadlines\n, • Successful experience in maintaining continuous professional development\n, • Successful experience in managing and engaging with the customer\n\n \n Knowledge \n\n • Good IT knowledge of general connectivity, network integration of devices, wireless protocols, mobile network technologies, software support and cyber security standards would be advantageous.\n\n Job Requirements \n\n • Participating in 24 hr on-call (where required)\n, • Lone working\n, • Frequent and regular travel within the assigned geographical region in UK. May need to travel to other locations in UK, Ireland & Europe on an occasional basis\n, • Full driving license\n\n